Autogen changes

1 files changed, 7 insertions, 495 deletions

diff --git a/autogen.sh b/autogen.sh
index 04e6af7..ddf0c90 100755
--- a/autogen.sh
+++ b/autogen.sh
@@ -1,500 +1,12 @@
 #!/bin/sh
-# Run this to generate all the initial makefiles, etc.
 
-#name of package
-PKG_NAME=${PKG_NAME:-Package}
-srcdir=${srcdir:-.}
+PKG_NAME="ido"
 
-# default version requirements ...
-REQUIRED_AUTOCONF_VERSION=${REQUIRED_AUTOCONF_VERSION:-2.53}
-REQUIRED_AUTOMAKE_VERSION=${REQUIRED_AUTOMAKE_VERSION:-1.9}
-REQUIRED_LIBTOOL_VERSION=${REQUIRED_LIBTOOL_VERSION:-1.5}
-REQUIRED_GETTEXT_VERSION=${REQUIRED_GETTEXT_VERSION:-0.12}
-REQUIRED_GLIB_GETTEXT_VERSION=${REQUIRED_GLIB_GETTEXT_VERSION:-2.2.0}
-REQUIRED_INTLTOOL_VERSION=${REQUIRED_INTLTOOL_VERSION:-0.30}
-REQUIRED_PKG_CONFIG_VERSION=${REQUIRED_PKG_CONFIG_VERSION:-0.14.0}
-REQUIRED_GTK_DOC_VERSION=${REQUIRED_GTK_DOC_VERSION:-1.0}
-REQUIRED_DOC_COMMON_VERSION=${REQUIRED_DOC_COMMON_VERSION:-2.3.0}
-REQUIRED_GNOME_DOC_UTILS_VERSION=${REQUIRED_GNOME_DOC_UTILS_VERSION:-0.4.2}
-
-# a list of required m4 macros.  Package can set an initial value
-REQUIRED_M4MACROS=${REQUIRED_M4MACROS:-}
-FORBIDDEN_M4MACROS=${FORBIDDEN_M4MACROS:-}
-
-# Not all echo versions allow -n, so we check what is possible. This test is
-# based on the one in autoconf.
-ECHO_C=
-ECHO_N=
-case `echo -n x` in
--n*)
-  case `echo 'x\c'` in
-  *c*) ;;
-  *)   ECHO_C='\c';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-# some terminal codes ...
-boldface="`tput bold 2>/dev/null`"
-normal="`tput sgr0 2>/dev/null`"
-printbold() {
-    echo $ECHO_N "$boldface" $ECHO_C
-    echo "$@"
-    echo $ECHO_N "$normal" $ECHO_C
-}    
-printerr() {
-    echo "$@" >&2
-}
-
-# Usage:
-#     compare_versions MIN_VERSION ACTUAL_VERSION
-# returns true if ACTUAL_VERSION >= MIN_VERSION
-compare_versions() {
-    ch_min_version=$1
-    ch_actual_version=$2
-    ch_status=0
-    IFS="${IFS=         }"; ch_save_IFS="$IFS"; IFS="."
-    set $ch_actual_version
-    for ch_min in $ch_min_version; do
-        ch_cur=`echo $1 | sed 's/[^0-9].*$//'`; shift # remove letter suffixes
-        if [ -z "$ch_min" ]; then break; fi
-        if [ -z "$ch_cur" ]; then ch_status=1; break; fi
-        if [ $ch_cur -gt $ch_min ]; then break; fi
-        if [ $ch_cur -lt $ch_min ]; then ch_status=1; break; fi
-    done
-    IFS="$ch_save_IFS"
-    return $ch_status
-}
-
-# Usage:
-#     version_check PACKAGE VARIABLE CHECKPROGS MIN_VERSION SOURCE
-# checks to see if the package is available
-version_check() {
-    vc_package=$1
-    vc_variable=$2
-    vc_checkprogs=$3
-    vc_min_version=$4
-    vc_source=$5
-    vc_status=1
-
-    vc_checkprog=`eval echo "\\$$vc_variable"`
-    if [ -n "$vc_checkprog" ]; then
-	printbold "using $vc_checkprog for $vc_package"
-	return 0
-    fi
-
-    if test "x$vc_package" = "xautomake" -a "x$vc_min_version" = "x1.4"; then
-	vc_comparator="="
-    else
-	vc_comparator=">="
-    fi
-    printbold "checking for $vc_package $vc_comparator $vc_min_version..."
-    for vc_checkprog in $vc_checkprogs; do
-	echo $ECHO_N "  testing $vc_checkprog... " $ECHO_C
-	if $vc_checkprog --version < /dev/null > /dev/null 2>&1; then
-	    vc_actual_version=`$vc_checkprog --version | head -n 1 | \
-                               sed 's/^.*[ 	]\([0-9.]*[a-z]*\).*$/\1/'`
-	    if compare_versions $vc_min_version $vc_actual_version; then
-		echo "found $vc_actual_version"
-		# set variables
-		eval "$vc_variable=$vc_checkprog; \
-			${vc_variable}_VERSION=$vc_actual_version"
-		vc_status=0
-		break
-	    else
-		echo "too old (found version $vc_actual_version)"
-	    fi
-	else
-	    echo "not found."
-	fi
-    done
-    if [ "$vc_status" != 0 ]; then
-	printerr "***Error***: You must have $vc_package $vc_comparator $vc_min_version installed"
-	printerr "  to build $PKG_NAME.  Download the appropriate package for"
-	printerr "  from your distribution or get the source tarball at"
-        printerr "    $vc_source"
-	printerr
-    fi
-    return $vc_status
-}
-
-# Usage:
-#     require_m4macro filename.m4
-# adds filename.m4 to the list of required macros
-require_m4macro() {
-    case "$REQUIRED_M4MACROS" in
-	$1\ * | *\ $1\ * | *\ $1) ;;
-	*) REQUIRED_M4MACROS="$REQUIRED_M4MACROS $1" ;;
-    esac
+which gnome-autogen.sh || {
+    echo "You need gnome-common from GNOME git"
+    exit 1
 }
 
-forbid_m4macro() {
-    case "$FORBIDDEN_M4MACROS" in
-	$1\ * | *\ $1\ * | *\ $1) ;;
-	*) FORBIDDEN_M4MACROS="$FORBIDDEN_M4MACROS $1" ;;
-    esac
-}
-
-# Usage:
-#     add_to_cm_macrodirs dirname
-# Adds the dir to $cm_macrodirs, if it's not there yet.
-add_to_cm_macrodirs() {
-    case $cm_macrodirs in
-    "$1 "* | *" $1 "* | *" $1") ;;
-    *) cm_macrodirs="$cm_macrodirs $1";;
-    esac
-}
-
-# Usage:
-#     print_m4macros_error
-# Prints an error message saying that autoconf macros were misused
-print_m4macros_error() {
-    printerr "***Error***: some autoconf macros required to build $PKG_NAME"
-    printerr "  were not found in your aclocal path, or some forbidden"
-    printerr "  macros were found.  Perhaps you need to adjust your"
-    printerr "  ACLOCAL_FLAGS?"
-    printerr
-}
-
-# Usage:
-#     check_m4macros
-# Checks that all the requested macro files are in the aclocal macro path
-# Uses REQUIRED_M4MACROS and ACLOCAL variables.
-check_m4macros() {
-    # construct list of macro directories
-    cm_macrodirs=`$ACLOCAL --print-ac-dir`
-    # aclocal also searches a version specific dir, eg. /usr/share/aclocal-1.9
-    # but it contains only Automake's own macros, so we can ignore it.
-
-    # Read the dirlist file, supported by Automake >= 1.7.
-    if compare_versions 1.7 $AUTOMAKE_VERSION && [ -s $cm_macrodirs/dirlist ]; then
-	cm_dirlist=`sed 's/[ 	]*#.*//;/^$/d' $cm_macrodirs/dirlist`
-	if [ -n "$cm_dirlist" ] ; then
-	    for cm_dir in $cm_dirlist; do
-		if [ -d $cm_dir ]; then
-		    add_to_cm_macrodirs $cm_dir
-		fi
-	    done
-	fi
-    fi
-
-    # Parse $ACLOCAL_FLAGS
-    set - $ACLOCAL_FLAGS
-    while [ $# -gt 0 ]; do
-	if [ "$1" = "-I" ]; then
-	    add_to_cm_macrodirs "$2"
-	    shift
-	fi
-	shift
-    done
-
-    cm_status=0
-    if [ -n "$REQUIRED_M4MACROS" ]; then
-	printbold "Checking for required M4 macros..."
-	# check that each macro file is in one of the macro dirs
-	for cm_macro in $REQUIRED_M4MACROS; do
-	    cm_macrofound=false
-	    for cm_dir in $cm_macrodirs; do
-		if [ -f "$cm_dir/$cm_macro" ]; then
-		    cm_macrofound=true
-		    break
-		fi
-		# The macro dir in Cygwin environments may contain a file
-		# called dirlist containing other directories to look in.
-		if [ -f "$cm_dir/dirlist" ]; then
-		    for cm_otherdir in `cat $cm_dir/dirlist`; do
-			if [ -f "$cm_otherdir/$cm_macro" ]; then
-			    cm_macrofound=true
-		            break
-			fi
-		    done
-		fi
-	    done
-	    if $cm_macrofound; then
-		:
-	    else
-		printerr "  $cm_macro not found"
-		cm_status=1
-	    fi
-	done
-    fi
-    if [ "$cm_status" != 0 ]; then
-        print_m4macros_error
-        return $cm_status
-    fi
-    if [ -n "$FORBIDDEN_M4MACROS" ]; then
-	printbold "Checking for forbidden M4 macros..."
-	# check that each macro file is in one of the macro dirs
-	for cm_macro in $FORBIDDEN_M4MACROS; do
-	    cm_macrofound=false
-	    for cm_dir in $cm_macrodirs; do
-		if [ -f "$cm_dir/$cm_macro" ]; then
-		    cm_macrofound=true
-		    break
-		fi
-	    done
-	    if $cm_macrofound; then
-		printerr "  $cm_macro found (should be cleared from macros dir)"
-		cm_status=1
-	    fi
-	done
-    fi
-    if [ "$cm_status" != 0 ]; then
-        print_m4macros_error
-    fi
-    return $cm_status
-}
-
-# try to catch the case where the macros2/ directory hasn't been cleared out.
-forbid_m4macro gnome-cxx-check.m4
-
-want_libtool=false
-want_gettext=false
-want_glib_gettext=false
-want_intltool=false
-want_pkg_config=false
-want_gtk_doc=false
-want_gnome_doc_utils=false
-
-configure_files="`find $srcdir -name '{arch}' -prune -o -name '_darcs' -prune -o -name '.??*' -prune -o -name configure.ac -print -o -name configure.in -print`"
-for configure_ac in $configure_files; do
-    dirname=`dirname $configure_ac`
-    if [ -f $dirname/NO-AUTO-GEN ]; then
-	echo skipping $dirname -- flagged as no auto-gen
-	continue
-    fi
-    if grep "^A[CM]_PROG_LIBTOOL" $configure_ac >/dev/null ||
-       grep "^LT_INIT" $configure_ac >/dev/null; then
-	want_libtool=true
-    fi
-    if grep "^AM_GNU_GETTEXT" $configure_ac >/dev/null; then
-	want_gettext=true
-    fi
-    if grep "^AM_GLIB_GNU_GETTEXT" $configure_ac >/dev/null; then
-	want_glib_gettext=true
-    fi
-    if grep "^AC_PROG_INTLTOOL" $configure_ac >/dev/null ||
-       grep "^IT_PROG_INTLTOOL" $configure_ac >/dev/null; then
-	want_intltool=true
-    fi
-    if grep "^PKG_CHECK_MODULES" $configure_ac >/dev/null; then
-	want_pkg_config=true
-    fi
-    if grep "^GTK_DOC_CHECK" $configure_ac >/dev/null; then
-	want_gtk_doc=true
-    fi
-    if grep "^GNOME_DOC_INIT" $configure_ac >/dev/null; then
-        want_gnome_doc_utils=true
-    fi
-
-    # check to make sure gnome-common macros can be found ...
-    if grep "^GNOME_COMMON_INIT" $configure_ac >/dev/null ||
-       grep "^GNOME_DEBUG_CHECK" $configure_ac >/dev/null ||
-       grep "^GNOME_MAINTAINER_MODE_DEFINES" $configure_ac >/dev/null; then
-        require_m4macro gnome-common.m4
-    fi
-    if grep "^GNOME_COMPILE_WARNINGS" $configure_ac >/dev/null ||
-       grep "^GNOME_CXX_WARNINGS" $configure_ac >/dev/null; then
-        require_m4macro gnome-compiler-flags.m4
-    fi
-done
-
-DIE=0
-
-#tell Mandrake autoconf wrapper we want autoconf 2.5x, not 2.13
-WANT_AUTOCONF_2_5=1
-export WANT_AUTOCONF_2_5
-version_check autoconf AUTOCONF 'autoconf2.50 autoconf autoconf-2.53' $REQUIRED_AUTOCONF_VERSION \
-    "http://ftp.gnu.org/pub/gnu/autoconf/autoconf-$REQUIRED_AUTOCONF_VERSION.tar.gz" || DIE=1
-AUTOHEADER=`echo $AUTOCONF | sed s/autoconf/autoheader/`
-
-case $REQUIRED_AUTOMAKE_VERSION in
-    1.4*) automake_progs="automake-1.4" ;;
-    1.5*) automake_progs="automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6 automake-1.5" ;;
-    1.6*) automake_progs="automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6" ;;
-    1.7*) automake_progs="automake-1.10 automake-1.9 automake-1.8 automake-1.7" ;;
-    1.8*) automake_progs="automake-1.10 automake-1.9 automake-1.8" ;;
-    1.9*) automake_progs="automake-1.10 automake-1.9" ;;
-    1.10*) automake_progs="automake-1.10" ;;
-esac
-version_check automake AUTOMAKE "$automake_progs" $REQUIRED_AUTOMAKE_VERSION \
-    "http://ftp.gnu.org/pub/gnu/automake/automake-$REQUIRED_AUTOMAKE_VERSION.tar.gz" || DIE=1
-ACLOCAL=`echo $AUTOMAKE | sed s/automake/aclocal/`
-
-if $want_libtool; then
-    version_check libtool LIBTOOLIZE libtoolize $REQUIRED_LIBTOOL_VERSION \
-        "http://ftp.gnu.org/pub/gnu/libtool/libtool-$REQUIRED_LIBTOOL_VERSION.tar.gz" || DIE=1
-    require_m4macro libtool.m4
-fi
-
-if $want_gettext; then
-    version_check gettext GETTEXTIZE gettextize $REQUIRED_GETTEXT_VERSION \
-        "http://ftp.gnu.org/pub/gnu/gettext/gettext-$REQUIRED_GETTEXT_VERSION.tar.gz" || DIE=1
-    require_m4macro gettext.m4
-fi
-
-if $want_glib_gettext; then
-    version_check glib-gettext GLIB_GETTEXTIZE glib-gettextize $REQUIRED_GLIB_GETTEXT_VERSION \
-        "ftp://ftp.gtk.org/pub/gtk/v2.2/glib-$REQUIRED_GLIB_GETTEXT_VERSION.tar.gz" || DIE=1
-    require_m4macro glib-gettext.m4
-fi
-
-if $want_intltool; then
-    version_check intltool INTLTOOLIZE intltoolize $REQUIRED_INTLTOOL_VERSION \
-        "http://ftp.gnome.org/pub/GNOME/sources/intltool/" || DIE=1
-    require_m4macro intltool.m4
-fi
-
-if $want_pkg_config; then
-    version_check pkg-config PKG_CONFIG pkg-config $REQUIRED_PKG_CONFIG_VERSION \
-        "'http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-$REQUIRED_PKG_CONFIG_VERSION.tar.gz" || DIE=1
-    require_m4macro pkg.m4
-fi
-
-if $want_gtk_doc; then
-    version_check gtk-doc GTKDOCIZE gtkdocize $REQUIRED_GTK_DOC_VERSION \
-        "http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/" || DIE=1
-    require_m4macro gtk-doc.m4
-fi
-
-if $want_gnome_doc_utils; then
-    version_check gnome-doc-utils GNOME_DOC_PREPARE gnome-doc-prepare $REQUIRED_GNOME_DOC_UTILS_VERSION \
-        "http://ftp.gnome.org/pub/GNOME/sources/gnome-doc-utils/" || DIE=1
-fi
-
-if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
-    version_check gnome-common DOC_COMMON gnome-doc-common \
-        $REQUIRED_DOC_COMMON_VERSION " " || DIE=1
-fi
-
-check_m4macros || DIE=1
-
-if [ "$DIE" -eq 1 ]; then
-  exit 1
-fi
-
-if [ "$#" = 0 -a "x$NOCONFIGURE" = "x" ]; then
-  printerr "**Warning**: I am going to run \`configure' with no arguments."
-  printerr "If you wish to pass any to it, please specify them on the"
-  printerr \`$0\'" command line."
-  printerr
-fi
-
-topdir=`pwd`
-for configure_ac in $configure_files; do 
-    dirname=`dirname $configure_ac`
-    basename=`basename $configure_ac`
-    if [ -f $dirname/NO-AUTO-GEN ]; then
-	echo skipping $dirname -- flagged as no auto-gen
-    elif [ ! -w $dirname ]; then
-        echo skipping $dirname -- directory is read only
-    else
-	printbold "Processing $configure_ac"
-	cd $dirname
-
-        # Note that the order these tools are called should match what
-        # autoconf's "autoupdate" package does.  See bug 138584 for
-        # details.
-
-        # programs that might install new macros get run before aclocal
-	if grep "^A[CM]_PROG_LIBTOOL" $basename >/dev/null ||
-	   grep "^LT_INIT" $basename >/dev/null; then
-	    printbold "Running $LIBTOOLIZE..."
-	    $LIBTOOLIZE --force --copy || exit 1
-	fi
-
-	if grep "^AM_GLIB_GNU_GETTEXT" $basename >/dev/null; then
-	    printbold "Running $GLIB_GETTEXTIZE... Ignore non-fatal messages."
-	    echo "no" | $GLIB_GETTEXTIZE --force --copy || exit 1
-	elif grep "^AM_GNU_GETTEXT" $basename >/dev/null; then
-	   if grep "^AM_GNU_GETTEXT_VERSION" $basename > /dev/null; then
-	   	printbold "Running autopoint..."
-		autopoint --force || exit 1
-	   else
-	    	printbold "Running $GETTEXTIZE... Ignore non-fatal messages."
-	    	echo "no" | $GETTEXTIZE --force --copy || exit 1
-	   fi
-	fi
-
-	if grep "^AC_PROG_INTLTOOL" $basename >/dev/null ||
-           grep "^IT_PROG_INTLTOOL" $basename >/dev/null; then
-	    printbold "Running $INTLTOOLIZE..."
-	    $INTLTOOLIZE --force --copy --automake || exit 1
-	fi
-	if grep "^GTK_DOC_CHECK" $basename >/dev/null; then
-	    printbold "Running $GTKDOCIZE..."
-	    $GTKDOCIZE --copy || exit 1
-	fi
-
-	if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
-	    printbold "Running gnome-doc-common..."
-	    gnome-doc-common --copy || exit 1
-	fi
-	if grep "^GNOME_DOC_INIT" $basename >/dev/null; then
-	    printbold "Running $GNOME_DOC_PREPARE..."
-	    $GNOME_DOC_PREPARE --force --copy || exit 1
-	fi
-
-        # Now run aclocal to pull in any additional macros needed
-
-	# if the AC_CONFIG_MACRO_DIR() macro is used, pass that
-	# directory to aclocal.
-	m4dir=`cat "$basename" | grep '^AC_CONFIG_MACRO_DIR' | sed -n -e 's/AC_CONFIG_MACRO_DIR(\([^()]*\))/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q`
-	if [ -n "$m4dir" ]; then
-	    m4dir="-I $m4dir"
-	fi
-	printbold "Running $ACLOCAL..."
-	$ACLOCAL $m4dir $ACLOCAL_FLAGS || exit 1
-
-	if grep "GNOME_AUTOGEN_OBSOLETE" aclocal.m4 >/dev/null; then
-	    printerr "*** obsolete gnome macros were used in $configure_ac"
-	fi
-
-	# Now that all the macros are sorted, run autoconf and autoheader ...
-	printbold "Running $AUTOCONF..."
-	$AUTOCONF || exit 1
-	if grep "^A[CM]_CONFIG_HEADER" $basename >/dev/null; then
-	    printbold "Running $AUTOHEADER..."
-	    $AUTOHEADER || exit 1
-	    # this prevents automake from thinking config.h.in is out of
-	    # date, since autoheader doesn't touch the file if it doesn't
-	    # change.
-	    test -f config.h.in && touch config.h.in
-	fi
-
-	# Finally, run automake to create the makefiles ...
-	printbold "Running $AUTOMAKE..."
-        if [ -f COPYING ]; then
-          cp -pf COPYING COPYING.autogen_bak
-        fi
-        if [ -f INSTALL ]; then
-          cp -pf INSTALL INSTALL.autogen_bak
-        fi
-	if [ $REQUIRED_AUTOMAKE_VERSION != 1.4 ]; then
-	    $AUTOMAKE --gnu --add-missing --force --copy || exit 1
-	else
-	    $AUTOMAKE --gnu --add-missing --copy || exit 1
-	fi
-        if [ -f COPYING.autogen_bak ]; then
-          cmp COPYING COPYING.autogen_bak > /dev/null || cp -pf COPYING.autogen_bak COPYING
-          rm -f COPYING.autogen_bak
-        fi
-        if [ -f INSTALL.autogen_bak ]; then
-          cmp INSTALL INSTALL.autogen_bak > /dev/null || cp -pf INSTALL.autogen_bak INSTALL
-          rm -f INSTALL.autogen_bak
-        fi
-
-	cd "$topdir"
-    fi
-done
-
-conf_flags="--enable-maintainer-mode"
-
-if test x$NOCONFIGURE = x; then
-    printbold Running $srcdir/configure $conf_flags "$@" ...
-    $srcdir/configure $conf_flags "$@" \
-	&& echo Now type \`make\' to compile $PKG_NAME || exit 1
-else
-    echo Skipping configure process.
-fi
+USE_GNOME2_MACROS=1 \
+USE_COMMON_DOC_BUILD=yes \
+gnome-autogen.sh --enable-gtk-doc $@
\ No newline at end of file