diff options
Diffstat (limited to 'autogen.sh')
| -rwxr-xr-x | autogen.sh | 502 |
1 files changed, 7 insertions, 495 deletions
@@ -1,500 +1,12 @@ #!/bin/sh -# Run this to generate all the initial makefiles, etc. -#name of package -PKG_NAME=${PKG_NAME:-Package} -srcdir=${srcdir:-.} +PKG_NAME="ido" -# default version requirements ... -REQUIRED_AUTOCONF_VERSION=${REQUIRED_AUTOCONF_VERSION:-2.53} -REQUIRED_AUTOMAKE_VERSION=${REQUIRED_AUTOMAKE_VERSION:-1.9} -REQUIRED_LIBTOOL_VERSION=${REQUIRED_LIBTOOL_VERSION:-1.5} -REQUIRED_GETTEXT_VERSION=${REQUIRED_GETTEXT_VERSION:-0.12} -REQUIRED_GLIB_GETTEXT_VERSION=${REQUIRED_GLIB_GETTEXT_VERSION:-2.2.0} -REQUIRED_INTLTOOL_VERSION=${REQUIRED_INTLTOOL_VERSION:-0.30} -REQUIRED_PKG_CONFIG_VERSION=${REQUIRED_PKG_CONFIG_VERSION:-0.14.0} -REQUIRED_GTK_DOC_VERSION=${REQUIRED_GTK_DOC_VERSION:-1.0} -REQUIRED_DOC_COMMON_VERSION=${REQUIRED_DOC_COMMON_VERSION:-2.3.0} -REQUIRED_GNOME_DOC_UTILS_VERSION=${REQUIRED_GNOME_DOC_UTILS_VERSION:-0.4.2} - -# a list of required m4 macros. Package can set an initial value -REQUIRED_M4MACROS=${REQUIRED_M4MACROS:-} -FORBIDDEN_M4MACROS=${FORBIDDEN_M4MACROS:-} - -# Not all echo versions allow -n, so we check what is possible. This test is -# based on the one in autoconf. -ECHO_C= -ECHO_N= -case `echo -n x` in --n*) - case `echo 'x\c'` in - *c*) ;; - *) ECHO_C='\c';; - esac;; -*) - ECHO_N='-n';; -esac - -# some terminal codes ... -boldface="`tput bold 2>/dev/null`" -normal="`tput sgr0 2>/dev/null`" -printbold() { - echo $ECHO_N "$boldface" $ECHO_C - echo "$@" - echo $ECHO_N "$normal" $ECHO_C -} -printerr() { - echo "$@" >&2 -} - -# Usage: -# compare_versions MIN_VERSION ACTUAL_VERSION -# returns true if ACTUAL_VERSION >= MIN_VERSION -compare_versions() { - ch_min_version=$1 - ch_actual_version=$2 - ch_status=0 - IFS="${IFS= }"; ch_save_IFS="$IFS"; IFS="." - set $ch_actual_version - for ch_min in $ch_min_version; do - ch_cur=`echo $1 | sed 's/[^0-9].*$//'`; shift # remove letter suffixes - if [ -z "$ch_min" ]; then break; fi - if [ -z "$ch_cur" ]; then ch_status=1; break; fi - if [ $ch_cur -gt $ch_min ]; then break; fi - if [ $ch_cur -lt $ch_min ]; then ch_status=1; break; fi - done - IFS="$ch_save_IFS" - return $ch_status -} - -# Usage: -# version_check PACKAGE VARIABLE CHECKPROGS MIN_VERSION SOURCE -# checks to see if the package is available -version_check() { - vc_package=$1 - vc_variable=$2 - vc_checkprogs=$3 - vc_min_version=$4 - vc_source=$5 - vc_status=1 - - vc_checkprog=`eval echo "\\$$vc_variable"` - if [ -n "$vc_checkprog" ]; then - printbold "using $vc_checkprog for $vc_package" - return 0 - fi - - if test "x$vc_package" = "xautomake" -a "x$vc_min_version" = "x1.4"; then - vc_comparator="=" - else - vc_comparator=">=" - fi - printbold "checking for $vc_package $vc_comparator $vc_min_version..." - for vc_checkprog in $vc_checkprogs; do - echo $ECHO_N " testing $vc_checkprog... " $ECHO_C - if $vc_checkprog --version < /dev/null > /dev/null 2>&1; then - vc_actual_version=`$vc_checkprog --version | head -n 1 | \ - sed 's/^.*[ ]\([0-9.]*[a-z]*\).*$/\1/'` - if compare_versions $vc_min_version $vc_actual_version; then - echo "found $vc_actual_version" - # set variables - eval "$vc_variable=$vc_checkprog; \ - ${vc_variable}_VERSION=$vc_actual_version" - vc_status=0 - break - else - echo "too old (found version $vc_actual_version)" - fi - else - echo "not found." - fi - done - if [ "$vc_status" != 0 ]; then - printerr "***Error***: You must have $vc_package $vc_comparator $vc_min_version installed" - printerr " to build $PKG_NAME. Download the appropriate package for" - printerr " from your distribution or get the source tarball at" - printerr " $vc_source" - printerr - fi - return $vc_status -} - -# Usage: -# require_m4macro filename.m4 -# adds filename.m4 to the list of required macros -require_m4macro() { - case "$REQUIRED_M4MACROS" in - $1\ * | *\ $1\ * | *\ $1) ;; - *) REQUIRED_M4MACROS="$REQUIRED_M4MACROS $1" ;; - esac +which gnome-autogen.sh || { + echo "You need gnome-common from GNOME git" + exit 1 } -forbid_m4macro() { - case "$FORBIDDEN_M4MACROS" in - $1\ * | *\ $1\ * | *\ $1) ;; - *) FORBIDDEN_M4MACROS="$FORBIDDEN_M4MACROS $1" ;; - esac -} - -# Usage: -# add_to_cm_macrodirs dirname -# Adds the dir to $cm_macrodirs, if it's not there yet. -add_to_cm_macrodirs() { - case $cm_macrodirs in - "$1 "* | *" $1 "* | *" $1") ;; - *) cm_macrodirs="$cm_macrodirs $1";; - esac -} - -# Usage: -# print_m4macros_error -# Prints an error message saying that autoconf macros were misused -print_m4macros_error() { - printerr "***Error***: some autoconf macros required to build $PKG_NAME" - printerr " were not found in your aclocal path, or some forbidden" - printerr " macros were found. Perhaps you need to adjust your" - printerr " ACLOCAL_FLAGS?" - printerr -} - -# Usage: -# check_m4macros -# Checks that all the requested macro files are in the aclocal macro path -# Uses REQUIRED_M4MACROS and ACLOCAL variables. -check_m4macros() { - # construct list of macro directories - cm_macrodirs=`$ACLOCAL --print-ac-dir` - # aclocal also searches a version specific dir, eg. /usr/share/aclocal-1.9 - # but it contains only Automake's own macros, so we can ignore it. - - # Read the dirlist file, supported by Automake >= 1.7. - if compare_versions 1.7 $AUTOMAKE_VERSION && [ -s $cm_macrodirs/dirlist ]; then - cm_dirlist=`sed 's/[ ]*#.*//;/^$/d' $cm_macrodirs/dirlist` - if [ -n "$cm_dirlist" ] ; then - for cm_dir in $cm_dirlist; do - if [ -d $cm_dir ]; then - add_to_cm_macrodirs $cm_dir - fi - done - fi - fi - - # Parse $ACLOCAL_FLAGS - set - $ACLOCAL_FLAGS - while [ $# -gt 0 ]; do - if [ "$1" = "-I" ]; then - add_to_cm_macrodirs "$2" - shift - fi - shift - done - - cm_status=0 - if [ -n "$REQUIRED_M4MACROS" ]; then - printbold "Checking for required M4 macros..." - # check that each macro file is in one of the macro dirs - for cm_macro in $REQUIRED_M4MACROS; do - cm_macrofound=false - for cm_dir in $cm_macrodirs; do - if [ -f "$cm_dir/$cm_macro" ]; then - cm_macrofound=true - break - fi - # The macro dir in Cygwin environments may contain a file - # called dirlist containing other directories to look in. - if [ -f "$cm_dir/dirlist" ]; then - for cm_otherdir in `cat $cm_dir/dirlist`; do - if [ -f "$cm_otherdir/$cm_macro" ]; then - cm_macrofound=true - break - fi - done - fi - done - if $cm_macrofound; then - : - else - printerr " $cm_macro not found" - cm_status=1 - fi - done - fi - if [ "$cm_status" != 0 ]; then - print_m4macros_error - return $cm_status - fi - if [ -n "$FORBIDDEN_M4MACROS" ]; then - printbold "Checking for forbidden M4 macros..." - # check that each macro file is in one of the macro dirs - for cm_macro in $FORBIDDEN_M4MACROS; do - cm_macrofound=false - for cm_dir in $cm_macrodirs; do - if [ -f "$cm_dir/$cm_macro" ]; then - cm_macrofound=true - break - fi - done - if $cm_macrofound; then - printerr " $cm_macro found (should be cleared from macros dir)" - cm_status=1 - fi - done - fi - if [ "$cm_status" != 0 ]; then - print_m4macros_error - fi - return $cm_status -} - -# try to catch the case where the macros2/ directory hasn't been cleared out. -forbid_m4macro gnome-cxx-check.m4 - -want_libtool=false -want_gettext=false -want_glib_gettext=false -want_intltool=false -want_pkg_config=false -want_gtk_doc=false -want_gnome_doc_utils=false - -configure_files="`find $srcdir -name '{arch}' -prune -o -name '_darcs' -prune -o -name '.??*' -prune -o -name configure.ac -print -o -name configure.in -print`" -for configure_ac in $configure_files; do - dirname=`dirname $configure_ac` - if [ -f $dirname/NO-AUTO-GEN ]; then - echo skipping $dirname -- flagged as no auto-gen - continue - fi - if grep "^A[CM]_PROG_LIBTOOL" $configure_ac >/dev/null || - grep "^LT_INIT" $configure_ac >/dev/null; then - want_libtool=true - fi - if grep "^AM_GNU_GETTEXT" $configure_ac >/dev/null; then - want_gettext=true - fi - if grep "^AM_GLIB_GNU_GETTEXT" $configure_ac >/dev/null; then - want_glib_gettext=true - fi - if grep "^AC_PROG_INTLTOOL" $configure_ac >/dev/null || - grep "^IT_PROG_INTLTOOL" $configure_ac >/dev/null; then - want_intltool=true - fi - if grep "^PKG_CHECK_MODULES" $configure_ac >/dev/null; then - want_pkg_config=true - fi - if grep "^GTK_DOC_CHECK" $configure_ac >/dev/null; then - want_gtk_doc=true - fi - if grep "^GNOME_DOC_INIT" $configure_ac >/dev/null; then - want_gnome_doc_utils=true - fi - - # check to make sure gnome-common macros can be found ... - if grep "^GNOME_COMMON_INIT" $configure_ac >/dev/null || - grep "^GNOME_DEBUG_CHECK" $configure_ac >/dev/null || - grep "^GNOME_MAINTAINER_MODE_DEFINES" $configure_ac >/dev/null; then - require_m4macro gnome-common.m4 - fi - if grep "^GNOME_COMPILE_WARNINGS" $configure_ac >/dev/null || - grep "^GNOME_CXX_WARNINGS" $configure_ac >/dev/null; then - require_m4macro gnome-compiler-flags.m4 - fi -done - -DIE=0 - -#tell Mandrake autoconf wrapper we want autoconf 2.5x, not 2.13 -WANT_AUTOCONF_2_5=1 -export WANT_AUTOCONF_2_5 -version_check autoconf AUTOCONF 'autoconf2.50 autoconf autoconf-2.53' $REQUIRED_AUTOCONF_VERSION \ - "http://ftp.gnu.org/pub/gnu/autoconf/autoconf-$REQUIRED_AUTOCONF_VERSION.tar.gz" || DIE=1 -AUTOHEADER=`echo $AUTOCONF | sed s/autoconf/autoheader/` - -case $REQUIRED_AUTOMAKE_VERSION in - 1.4*) automake_progs="automake-1.4" ;; - 1.5*) automake_progs="automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6 automake-1.5" ;; - 1.6*) automake_progs="automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6" ;; - 1.7*) automake_progs="automake-1.10 automake-1.9 automake-1.8 automake-1.7" ;; - 1.8*) automake_progs="automake-1.10 automake-1.9 automake-1.8" ;; - 1.9*) automake_progs="automake-1.10 automake-1.9" ;; - 1.10*) automake_progs="automake-1.10" ;; -esac -version_check automake AUTOMAKE "$automake_progs" $REQUIRED_AUTOMAKE_VERSION \ - "http://ftp.gnu.org/pub/gnu/automake/automake-$REQUIRED_AUTOMAKE_VERSION.tar.gz" || DIE=1 -ACLOCAL=`echo $AUTOMAKE | sed s/automake/aclocal/` - -if $want_libtool; then - version_check libtool LIBTOOLIZE libtoolize $REQUIRED_LIBTOOL_VERSION \ - "http://ftp.gnu.org/pub/gnu/libtool/libtool-$REQUIRED_LIBTOOL_VERSION.tar.gz" || DIE=1 - require_m4macro libtool.m4 -fi - -if $want_gettext; then - version_check gettext GETTEXTIZE gettextize $REQUIRED_GETTEXT_VERSION \ - "http://ftp.gnu.org/pub/gnu/gettext/gettext-$REQUIRED_GETTEXT_VERSION.tar.gz" || DIE=1 - require_m4macro gettext.m4 -fi - -if $want_glib_gettext; then - version_check glib-gettext GLIB_GETTEXTIZE glib-gettextize $REQUIRED_GLIB_GETTEXT_VERSION \ - "ftp://ftp.gtk.org/pub/gtk/v2.2/glib-$REQUIRED_GLIB_GETTEXT_VERSION.tar.gz" || DIE=1 - require_m4macro glib-gettext.m4 -fi - -if $want_intltool; then - version_check intltool INTLTOOLIZE intltoolize $REQUIRED_INTLTOOL_VERSION \ - "http://ftp.gnome.org/pub/GNOME/sources/intltool/" || DIE=1 - require_m4macro intltool.m4 -fi - -if $want_pkg_config; then - version_check pkg-config PKG_CONFIG pkg-config $REQUIRED_PKG_CONFIG_VERSION \ - "'http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-$REQUIRED_PKG_CONFIG_VERSION.tar.gz" || DIE=1 - require_m4macro pkg.m4 -fi - -if $want_gtk_doc; then - version_check gtk-doc GTKDOCIZE gtkdocize $REQUIRED_GTK_DOC_VERSION \ - "http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/" || DIE=1 - require_m4macro gtk-doc.m4 -fi - -if $want_gnome_doc_utils; then - version_check gnome-doc-utils GNOME_DOC_PREPARE gnome-doc-prepare $REQUIRED_GNOME_DOC_UTILS_VERSION \ - "http://ftp.gnome.org/pub/GNOME/sources/gnome-doc-utils/" || DIE=1 -fi - -if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then - version_check gnome-common DOC_COMMON gnome-doc-common \ - $REQUIRED_DOC_COMMON_VERSION " " || DIE=1 -fi - -check_m4macros || DIE=1 - -if [ "$DIE" -eq 1 ]; then - exit 1 -fi - -if [ "$#" = 0 -a "x$NOCONFIGURE" = "x" ]; then - printerr "**Warning**: I am going to run \`configure' with no arguments." - printerr "If you wish to pass any to it, please specify them on the" - printerr \`$0\'" command line." - printerr -fi - -topdir=`pwd` -for configure_ac in $configure_files; do - dirname=`dirname $configure_ac` - basename=`basename $configure_ac` - if [ -f $dirname/NO-AUTO-GEN ]; then - echo skipping $dirname -- flagged as no auto-gen - elif [ ! -w $dirname ]; then - echo skipping $dirname -- directory is read only - else - printbold "Processing $configure_ac" - cd $dirname - - # Note that the order these tools are called should match what - # autoconf's "autoupdate" package does. See bug 138584 for - # details. - - # programs that might install new macros get run before aclocal - if grep "^A[CM]_PROG_LIBTOOL" $basename >/dev/null || - grep "^LT_INIT" $basename >/dev/null; then - printbold "Running $LIBTOOLIZE..." - $LIBTOOLIZE --force --copy || exit 1 - fi - - if grep "^AM_GLIB_GNU_GETTEXT" $basename >/dev/null; then - printbold "Running $GLIB_GETTEXTIZE... Ignore non-fatal messages." - echo "no" | $GLIB_GETTEXTIZE --force --copy || exit 1 - elif grep "^AM_GNU_GETTEXT" $basename >/dev/null; then - if grep "^AM_GNU_GETTEXT_VERSION" $basename > /dev/null; then - printbold "Running autopoint..." - autopoint --force || exit 1 - else - printbold "Running $GETTEXTIZE... Ignore non-fatal messages." - echo "no" | $GETTEXTIZE --force --copy || exit 1 - fi - fi - - if grep "^AC_PROG_INTLTOOL" $basename >/dev/null || - grep "^IT_PROG_INTLTOOL" $basename >/dev/null; then - printbold "Running $INTLTOOLIZE..." - $INTLTOOLIZE --force --copy --automake || exit 1 - fi - if grep "^GTK_DOC_CHECK" $basename >/dev/null; then - printbold "Running $GTKDOCIZE..." - $GTKDOCIZE --copy || exit 1 - fi - - if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then - printbold "Running gnome-doc-common..." - gnome-doc-common --copy || exit 1 - fi - if grep "^GNOME_DOC_INIT" $basename >/dev/null; then - printbold "Running $GNOME_DOC_PREPARE..." - $GNOME_DOC_PREPARE --force --copy || exit 1 - fi - - # Now run aclocal to pull in any additional macros needed - - # if the AC_CONFIG_MACRO_DIR() macro is used, pass that - # directory to aclocal. - m4dir=`cat "$basename" | grep '^AC_CONFIG_MACRO_DIR' | sed -n -e 's/AC_CONFIG_MACRO_DIR(\([^()]*\))/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q` - if [ -n "$m4dir" ]; then - m4dir="-I $m4dir" - fi - printbold "Running $ACLOCAL..." - $ACLOCAL $m4dir $ACLOCAL_FLAGS || exit 1 - - if grep "GNOME_AUTOGEN_OBSOLETE" aclocal.m4 >/dev/null; then - printerr "*** obsolete gnome macros were used in $configure_ac" - fi - - # Now that all the macros are sorted, run autoconf and autoheader ... - printbold "Running $AUTOCONF..." - $AUTOCONF || exit 1 - if grep "^A[CM]_CONFIG_HEADER" $basename >/dev/null; then - printbold "Running $AUTOHEADER..." - $AUTOHEADER || exit 1 - # this prevents automake from thinking config.h.in is out of - # date, since autoheader doesn't touch the file if it doesn't - # change. - test -f config.h.in && touch config.h.in - fi - - # Finally, run automake to create the makefiles ... - printbold "Running $AUTOMAKE..." - if [ -f COPYING ]; then - cp -pf COPYING COPYING.autogen_bak - fi - if [ -f INSTALL ]; then - cp -pf INSTALL INSTALL.autogen_bak - fi - if [ $REQUIRED_AUTOMAKE_VERSION != 1.4 ]; then - $AUTOMAKE --gnu --add-missing --force --copy || exit 1 - else - $AUTOMAKE --gnu --add-missing --copy || exit 1 - fi - if [ -f COPYING.autogen_bak ]; then - cmp COPYING COPYING.autogen_bak > /dev/null || cp -pf COPYING.autogen_bak COPYING - rm -f COPYING.autogen_bak - fi - if [ -f INSTALL.autogen_bak ]; then - cmp INSTALL INSTALL.autogen_bak > /dev/null || cp -pf INSTALL.autogen_bak INSTALL - rm -f INSTALL.autogen_bak - fi - - cd "$topdir" - fi -done - -conf_flags="--enable-maintainer-mode" - -if test x$NOCONFIGURE = x; then - printbold Running $srcdir/configure $conf_flags "$@" ... - $srcdir/configure $conf_flags "$@" \ - && echo Now type \`make\' to compile $PKG_NAME || exit 1 -else - echo Skipping configure process. -fi +USE_GNOME2_MACROS=1 \ +USE_COMMON_DOC_BUILD=yes \ +gnome-autogen.sh --enable-gtk-doc $@
\ No newline at end of file |