diff options
Diffstat (limited to 'aclocal.m4')
| -rw-r--r-- | aclocal.m4 | 8180 |
1 files changed, 14 insertions, 8166 deletions
@@ -13,8 +13,8 @@ m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.67],, -[m4_warning([this file was generated for autoconf 2.67. +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],, +[m4_warning([this file was generated for autoconf 2.68. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) @@ -452,8166 +452,6 @@ sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD fi]) - -dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml]) -# serial 40 IT_PROG_INTLTOOL -AC_DEFUN([IT_PROG_INTLTOOL], [ -AC_PREREQ([2.50])dnl -AC_REQUIRE([AM_NLS])dnl - -case "$am__api_version" in - 1.[01234]) - AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool]) - ;; - *) - ;; -esac - -if test -n "$1"; then - AC_MSG_CHECKING([for intltool >= $1]) - - INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` - INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` - [INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` - ] - AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found]) - test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || - AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.]) -fi - -AC_PATH_PROG(INTLTOOL_UPDATE, [intltool-update]) -AC_PATH_PROG(INTLTOOL_MERGE, [intltool-merge]) -AC_PATH_PROG(INTLTOOL_EXTRACT, [intltool-extract]) -if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then - AC_MSG_ERROR([The intltool scripts were not found. Please install intltool.]) -fi - - INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' -INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< [$]@' - INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' -INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< [$]@' - INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - -_IT_SUBST(INTLTOOL_DESKTOP_RULE) -_IT_SUBST(INTLTOOL_DIRECTORY_RULE) -_IT_SUBST(INTLTOOL_KEYS_RULE) -_IT_SUBST(INTLTOOL_PROP_RULE) -_IT_SUBST(INTLTOOL_OAF_RULE) -_IT_SUBST(INTLTOOL_PONG_RULE) -_IT_SUBST(INTLTOOL_SERVER_RULE) -_IT_SUBST(INTLTOOL_SHEET_RULE) -_IT_SUBST(INTLTOOL_SOUNDLIST_RULE) -_IT_SUBST(INTLTOOL_UI_RULE) -_IT_SUBST(INTLTOOL_XAM_RULE) -_IT_SUBST(INTLTOOL_KBD_RULE) -_IT_SUBST(INTLTOOL_XML_RULE) -_IT_SUBST(INTLTOOL_XML_NOMERGE_RULE) -_IT_SUBST(INTLTOOL_CAVES_RULE) -_IT_SUBST(INTLTOOL_SCHEMAS_RULE) -_IT_SUBST(INTLTOOL_THEME_RULE) -_IT_SUBST(INTLTOOL_SERVICE_RULE) -_IT_SUBST(INTLTOOL_POLICY_RULE) - -# Check the gettext tools to make sure they are GNU -AC_PATH_PROG(XGETTEXT, xgettext) -AC_PATH_PROG(MSGMERGE, msgmerge) -AC_PATH_PROG(MSGFMT, msgfmt) -AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) -if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then - AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) -fi -xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" -mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" -mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" -if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then - AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) -fi - -AC_PATH_PROG(INTLTOOL_PERL, perl) -if test -z "$INTLTOOL_PERL"; then - AC_MSG_ERROR([perl not found]) -fi -AC_MSG_CHECKING([for perl >= 5.8.1]) -$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 -if test $? -ne 0; then - AC_MSG_ERROR([perl 5.8.1 is required for intltool]) -else - IT_PERL_VERSION="`$INTLTOOL_PERL -e \"printf '%vd', $^V\"`" - AC_MSG_RESULT([$IT_PERL_VERSION]) -fi -if test "x$2" != "xno-xml"; then - AC_MSG_CHECKING([for XML::Parser]) - if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then - AC_MSG_RESULT([ok]) - else - AC_MSG_ERROR([XML::Parser perl module is required for intltool]) - fi -fi - -# Substitute ALL_LINGUAS so we can use it in po/Makefile -AC_SUBST(ALL_LINGUAS) - -# Set DATADIRNAME correctly if it is not set yet -# (copied from glib-gettext.m4) -if test -z "$DATADIRNAME"; then - AC_LINK_IFELSE( - [AC_LANG_PROGRAM([[]], - [[extern int _nl_msg_cat_cntr; - return _nl_msg_cat_cntr]])], - [DATADIRNAME=share], - [case $host in - *-*-solaris*) - dnl On Solaris, if bind_textdomain_codeset is in libc, - dnl GNU format message catalog is always supported, - dnl since both are added to the libc all together. - dnl Hence, we'd like to go with DATADIRNAME=share - dnl in this case. - AC_CHECK_FUNC(bind_textdomain_codeset, - [DATADIRNAME=share], [DATADIRNAME=lib]) - ;; - *) - [DATADIRNAME=lib] - ;; - esac]) -fi -AC_SUBST(DATADIRNAME) - -IT_PO_SUBDIR([po]) - -]) - - -# IT_PO_SUBDIR(DIRNAME) -# --------------------- -# All po subdirs have to be declared with this macro; the subdir "po" is -# declared by IT_PROG_INTLTOOL. -# -AC_DEFUN([IT_PO_SUBDIR], -[AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS. -dnl -dnl The following CONFIG_COMMANDS should be executed at the very end -dnl of config.status. -AC_CONFIG_COMMANDS_PRE([ - AC_CONFIG_COMMANDS([$1/stamp-it], [ - if [ ! grep "^# INTLTOOL_MAKEFILE$" "$1/Makefile.in" > /dev/null ]; then - AC_MSG_ERROR([$1/Makefile.in.in was not created by intltoolize.]) - fi - rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp" - >"$1/stamp-it.tmp" - [sed '/^#/d - s/^[[].*] *// - /^[ ]*$/d - '"s|^| $ac_top_srcdir/|" \ - "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES" - ] - [sed '/^POTFILES =/,/[^\\]$/ { - /^POTFILES =/!d - r $1/POTFILES - } - ' "$1/Makefile.in" >"$1/Makefile"] - rm -f "$1/Makefile.tmp" - mv "$1/stamp-it.tmp" "$1/stamp-it" - ]) -])dnl -]) - -# _IT_SUBST(VARIABLE) -# ------------------- -# Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST -# -AC_DEFUN([_IT_SUBST], -[ -AC_SUBST([$1]) -m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) -] -) - -# deprecated macros -AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL]) -# A hint is needed for aclocal from Automake <= 1.9.4: -# AC_DEFUN([AC_PROG_INTLTOOL], ...) - - -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008 Free Software Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -m4_define([_LT_COPYING], [dnl -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008 Free Software Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -]) - -# serial 56 LT_INIT - - -# LT_PREREQ(VERSION) -# ------------------ -# Complain and exit if this libtool version is less that VERSION. -m4_defun([LT_PREREQ], -[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, - [m4_default([$3], - [m4_fatal([Libtool version $1 or higher is required], - 63)])], - [$2])]) - - -# _LT_CHECK_BUILDDIR -# ------------------ -# Complain if the absolute build directory name contains unusual characters -m4_defun([_LT_CHECK_BUILDDIR], -[case `pwd` in - *\ * | *\ *) - AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; -esac -]) - - -# LT_INIT([OPTIONS]) -# ------------------ -AC_DEFUN([LT_INIT], -[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT -AC_BEFORE([$0], [LT_LANG])dnl -AC_BEFORE([$0], [LT_OUTPUT])dnl -AC_BEFORE([$0], [LTDL_INIT])dnl -m4_require([_LT_CHECK_BUILDDIR])dnl - -dnl Autoconf doesn't catch unexpanded LT_ macros by default: -m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl -m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl -dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 -dnl unless we require an AC_DEFUNed macro: -AC_REQUIRE([LTOPTIONS_VERSION])dnl -AC_REQUIRE([LTSUGAR_VERSION])dnl -AC_REQUIRE([LTVERSION_VERSION])dnl -AC_REQUIRE([LTOBSOLETE_VERSION])dnl -m4_require([_LT_PROG_LTMAIN])dnl - -dnl Parse OPTIONS -_LT_SET_OPTIONS([$0], [$1]) - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -_LT_SETUP - -# Only expand once: -m4_define([LT_INIT]) -])# LT_INIT - -# Old names: -AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) -AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_PROG_LIBTOOL], []) -dnl AC_DEFUN([AM_PROG_LIBTOOL], []) - - -# _LT_CC_BASENAME(CC) -# ------------------- -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -m4_defun([_LT_CC_BASENAME], -[for cc_temp in $1""; do - case $cc_temp in - compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; - distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` -]) - - -# _LT_FILEUTILS_DEFAULTS -# ---------------------- -# It is okay to use these file commands and assume they have been set -# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. -m4_defun([_LT_FILEUTILS_DEFAULTS], -[: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} -])# _LT_FILEUTILS_DEFAULTS - - -# _LT_SETUP -# --------- -m4_defun([_LT_SETUP], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -_LT_DECL([], [host_alias], [0], [The host system])dnl -_LT_DECL([], [host], [0])dnl -_LT_DECL([], [host_os], [0])dnl -dnl -_LT_DECL([], [build_alias], [0], [The build system])dnl -_LT_DECL([], [build], [0])dnl -_LT_DECL([], [build_os], [0])dnl -dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([LT_PATH_LD])dnl -AC_REQUIRE([LT_PATH_NM])dnl -dnl -AC_REQUIRE([AC_PROG_LN_S])dnl -test -z "$LN_S" && LN_S="ln -s" -_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl -dnl -AC_REQUIRE([LT_CMD_MAX_LEN])dnl -_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl -_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl -dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_CHECK_SHELL_FEATURES])dnl -m4_require([_LT_CMD_RELOAD])dnl -m4_require([_LT_CHECK_MAGIC_METHOD])dnl -m4_require([_LT_CMD_OLD_ARCHIVE])dnl -m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl - -_LT_CONFIG_LIBTOOL_INIT([ -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi -]) -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - -_LT_CHECK_OBJDIR - -m4_require([_LT_TAG_COMPILER])dnl -_LT_PROG_ECHO_BACKSLASH - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([["`\\]]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld="$lt_cv_prog_gnu_ld" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -_LT_CC_BASENAME([$compiler]) - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - _LT_PATH_MAGIC - fi - ;; -esac - -# Use C for the default configuration in the libtool script -LT_SUPPORTED_TAG([CC]) -_LT_LANG_C_CONFIG -_LT_LANG_DEFAULT_CONFIG -_LT_CONFIG_COMMANDS -])# _LT_SETUP - - -# _LT_PROG_LTMAIN -# --------------- -# Note that this code is called both from `configure', and `config.status' -# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, -# `config.status' has no value for ac_aux_dir unless we are using Automake, -# so we pass a copy along to make sure it has a sensible value anyway. -m4_defun([_LT_PROG_LTMAIN], -[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl -_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) -ltmain="$ac_aux_dir/ltmain.sh" -])# _LT_PROG_LTMAIN - - - -# So that we can recreate a full libtool script including additional -# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS -# in macros and then make a single call at the end using the `libtool' -# label. - - -# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) -# ---------------------------------------- -# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. -m4_define([_LT_CONFIG_LIBTOOL_INIT], -[m4_ifval([$1], - [m4_append([_LT_OUTPUT_LIBTOOL_INIT], - [$1 -])])]) - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_INIT]) - - -# _LT_CONFIG_LIBTOOL([COMMANDS]) -# ------------------------------ -# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. -m4_define([_LT_CONFIG_LIBTOOL], -[m4_ifval([$1], - [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], - [$1 -])])]) - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) - - -# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) -# ----------------------------------------------------- -m4_defun([_LT_CONFIG_SAVE_COMMANDS], -[_LT_CONFIG_LIBTOOL([$1]) -_LT_CONFIG_LIBTOOL_INIT([$2]) -]) - - -# _LT_FORMAT_COMMENT([COMMENT]) -# ----------------------------- -# Add leading comment marks to the start of each line, and a trailing -# full-stop to the whole comment if one is not present already. -m4_define([_LT_FORMAT_COMMENT], -[m4_ifval([$1], [ -m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], - [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) -)]) - - - - - -# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) -# ------------------------------------------------------------------- -# CONFIGNAME is the name given to the value in the libtool script. -# VARNAME is the (base) name used in the configure script. -# VALUE may be 0, 1 or 2 for a computed quote escaped value based on -# VARNAME. Any other value will be used directly. -m4_define([_LT_DECL], -[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], - [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], - [m4_ifval([$1], [$1], [$2])]) - lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) - m4_ifval([$4], - [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) - lt_dict_add_subkey([lt_decl_dict], [$2], - [tagged?], [m4_ifval([$5], [yes], [no])])]) -]) - - -# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) -# -------------------------------------------------------- -m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) - - -# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ -m4_define([lt_decl_tag_varnames], -[_lt_decl_filter([tagged?], [yes], $@)]) - - -# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) -# --------------------------------------------------------- -m4_define([_lt_decl_filter], -[m4_case([$#], - [0], [m4_fatal([$0: too few arguments: $#])], - [1], [m4_fatal([$0: too few arguments: $#: $1])], - [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], - [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], - [lt_dict_filter([lt_decl_dict], $@)])[]dnl -]) - - -# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) -# -------------------------------------------------- -m4_define([lt_decl_quote_varnames], -[_lt_decl_filter([value], [1], $@)]) - - -# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- -m4_define([lt_decl_dquote_varnames], -[_lt_decl_filter([value], [2], $@)]) - - -# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- -m4_define([lt_decl_varnames_tagged], -[m4_assert([$# <= 2])dnl -_$0(m4_quote(m4_default([$1], [[, ]])), - m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), - m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) -m4_define([_lt_decl_varnames_tagged], -[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) - - -# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ -m4_define([lt_decl_all_varnames], -[_$0(m4_quote(m4_default([$1], [[, ]])), - m4_if([$2], [], - m4_quote(lt_decl_varnames), - m4_quote(m4_shift($@))))[]dnl -]) -m4_define([_lt_decl_all_varnames], -[lt_join($@, lt_decl_varnames_tagged([$1], - lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl -]) - - -# _LT_CONFIG_STATUS_DECLARE([VARNAME]) -# ------------------------------------ -# Quote a variable value, and forward it to `config.status' so that its -# declaration there will have the same value as in `configure'. VARNAME -# must have a single quote delimited value for this to work. -m4_define([_LT_CONFIG_STATUS_DECLARE], -[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) - - -# _LT_CONFIG_STATUS_DECLARATIONS -# ------------------------------ -# We delimit libtool config variables with single quotes, so when -# we write them to config.status, we have to be sure to quote all -# embedded single quotes properly. In configure, this macro expands -# each variable declared with _LT_DECL (and _LT_TAGDECL) into: -# -# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`' -m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], -[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), - [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) - - -# _LT_LIBTOOL_TAGS -# ---------------- -# Output comment and list of tags supported by the script -m4_defun([_LT_LIBTOOL_TAGS], -[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl -available_tags="_LT_TAGS"dnl -]) - - -# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) -# ----------------------------------- -# Extract the dictionary values for VARNAME (optionally with TAG) and -# expand to a commented shell variable setting: -# -# # Some comment about what VAR is for. -# visible_name=$lt_internal_name -m4_define([_LT_LIBTOOL_DECLARE], -[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], - [description])))[]dnl -m4_pushdef([_libtool_name], - m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl -m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), - [0], [_libtool_name=[$]$1], - [1], [_libtool_name=$lt_[]$1], - [2], [_libtool_name=$lt_[]$1], - [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl -m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl -]) - - -# _LT_LIBTOOL_CONFIG_VARS -# ----------------------- -# Produce commented declarations of non-tagged libtool config variables -# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' -# script. Tagged libtool config variables (even for the LIBTOOL CONFIG -# section) are produced by _LT_LIBTOOL_TAG_VARS. -m4_defun([_LT_LIBTOOL_CONFIG_VARS], -[m4_foreach([_lt_var], - m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), - [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) - - -# _LT_LIBTOOL_TAG_VARS(TAG) -# ------------------------- -m4_define([_LT_LIBTOOL_TAG_VARS], -[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), - [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) - - -# _LT_TAGVAR(VARNAME, [TAGNAME]) -# ------------------------------ -m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) - - -# _LT_CONFIG_COMMANDS -# ------------------- -# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of -# variables for single and double quote escaping we saved from calls -# to _LT_DECL, we can put quote escaped variables declarations -# into `config.status', and then the shell code to quote escape them in -# for loops in `config.status'. Finally, any additional code accumulated -# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. -m4_defun([_LT_CONFIG_COMMANDS], -[AC_PROVIDE_IFELSE([LT_OUTPUT], - dnl If the libtool generation code has been placed in $CONFIG_LT, - dnl instead of duplicating it all over again into config.status, - dnl then we will have config.status run $CONFIG_LT later, so it - dnl needs to know what name is stored there: - [AC_CONFIG_COMMANDS([libtool], - [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], - dnl If the libtool generation code is destined for config.status, - dnl expand the accumulated commands and init code now: - [AC_CONFIG_COMMANDS([libtool], - [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) -])#_LT_CONFIG_COMMANDS - - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], -[ - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -_LT_CONFIG_STATUS_DECLARATIONS -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# Quote evaled strings. -for var in lt_decl_all_varnames([[ \ -]], lt_decl_quote_varnames); do - case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in - *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in lt_decl_all_varnames([[ \ -]], lt_decl_dquote_varnames); do - case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in - *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Fix-up fallback echo if it was mangled by the above quoting rules. -case \$lt_ECHO in -*'\\\[$]0 --fallback-echo"')dnl " - lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` - ;; -esac - -_LT_OUTPUT_LIBTOOL_INIT -]) - - -# LT_OUTPUT -# --------- -# This macro allows early generation of the libtool script (before -# AC_OUTPUT is called), incase it is used in configure for compilation -# tests. -AC_DEFUN([LT_OUTPUT], -[: ${CONFIG_LT=./config.lt} -AC_MSG_NOTICE([creating $CONFIG_LT]) -cat >"$CONFIG_LT" <<_LTEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate a libtool stub with the current configuration. - -lt_cl_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_LTEOF - -cat >>"$CONFIG_LT" <<\_LTEOF -AS_SHELL_SANITIZE -_AS_PREPARE - -exec AS_MESSAGE_FD>&1 -exec AS_MESSAGE_LOG_FD>>config.log -{ - echo - AS_BOX([Running $as_me.]) -} >&AS_MESSAGE_LOG_FD - -lt_cl_help="\ -\`$as_me' creates a local libtool stub from the current configuration, -for use in further configure time tests before the real libtool is -generated. - -Usage: $[0] [[OPTIONS]] - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - -Report bugs to <bug-libtool@gnu.org>." - -lt_cl_version="\ -m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl -m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) -configured by $[0], generated by m4_PACKAGE_STRING. - -Copyright (C) 2008 Free Software Foundation, Inc. -This config.lt script is free software; the Free Software Foundation -gives unlimited permision to copy, distribute and modify it." - -while test $[#] != 0 -do - case $[1] in - --version | --v* | -V ) - echo "$lt_cl_version"; exit 0 ;; - --help | --h* | -h ) - echo "$lt_cl_help"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --quiet | --q* | --silent | --s* | -q ) - lt_cl_silent=: ;; - - -*) AC_MSG_ERROR([unrecognized option: $[1] -Try \`$[0] --help' for more information.]) ;; - - *) AC_MSG_ERROR([unrecognized argument: $[1] -Try \`$[0] --help' for more information.]) ;; - esac - shift -done - -if $lt_cl_silent; then - exec AS_MESSAGE_FD>/dev/null -fi -_LTEOF - -cat >>"$CONFIG_LT" <<_LTEOF -_LT_OUTPUT_LIBTOOL_COMMANDS_INIT -_LTEOF - -cat >>"$CONFIG_LT" <<\_LTEOF -AC_MSG_NOTICE([creating $ofile]) -_LT_OUTPUT_LIBTOOL_COMMANDS -AS_EXIT(0) -_LTEOF -chmod +x "$CONFIG_LT" - -# configure is writing to config.log, but config.lt does its own redirection, -# appending to config.log, which fails on DOS, as config.log is still kept -# open by configure. Here we exec the FD to /dev/null, effectively closing -# config.log, so it can be properly (re)opened and appended to by config.lt. -if test "$no_create" != yes; then - lt_cl_success=: - test "$silent" = yes && - lt_config_lt_args="$lt_config_lt_args --quiet" - exec AS_MESSAGE_LOG_FD>/dev/null - $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false - exec AS_MESSAGE_LOG_FD>>config.log - $lt_cl_success || AS_EXIT(1) -fi -])# LT_OUTPUT - - -# _LT_CONFIG(TAG) -# --------------- -# If TAG is the built-in tag, create an initial libtool script with a -# default configuration from the untagged config vars. Otherwise add code -# to config.status for appending the configuration named by TAG from the -# matching tagged config vars. -m4_defun([_LT_CONFIG], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -_LT_CONFIG_SAVE_COMMANDS([ - m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl - m4_if(_LT_TAG, [C], [ - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - - cfgfile="${ofile}T" - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -_LT_COPYING -_LT_LIBTOOL_TAGS - -# ### BEGIN LIBTOOL CONFIG -_LT_LIBTOOL_CONFIG_VARS -_LT_LIBTOOL_TAG_VARS -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - _LT_PROG_LTMAIN - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - _LT_PROG_XSI_SHELLFNS - - sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -], -[cat <<_LT_EOF >> "$ofile" - -dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded -dnl in a comment (ie after a #). -# ### BEGIN LIBTOOL TAG CONFIG: $1 -_LT_LIBTOOL_TAG_VARS(_LT_TAG) -# ### END LIBTOOL TAG CONFIG: $1 -_LT_EOF -])dnl /m4_if -], -[m4_if([$1], [], [ - PACKAGE='$PACKAGE' - VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' - RM='$RM' - ofile='$ofile'], []) -])dnl /_LT_CONFIG_SAVE_COMMANDS -])# _LT_CONFIG - - -# LT_SUPPORTED_TAG(TAG) -# --------------------- -# Trace this macro to discover what tags are supported by the libtool -# --tag option, using: -# autoconf --trace 'LT_SUPPORTED_TAG:$1' -AC_DEFUN([LT_SUPPORTED_TAG], []) - - -# C support is built-in for now -m4_define([_LT_LANG_C_enabled], []) -m4_define([_LT_TAGS], []) - - -# LT_LANG(LANG) -# ------------- -# Enable libtool support for the given language if not already enabled. -AC_DEFUN([LT_LANG], -[AC_BEFORE([$0], [LT_OUTPUT])dnl -m4_case([$1], - [C], [_LT_LANG(C)], - [C++], [_LT_LANG(CXX)], - [Java], [_LT_LANG(GCJ)], - [Fortran 77], [_LT_LANG(F77)], - [Fortran], [_LT_LANG(FC)], - [Windows Resource], [_LT_LANG(RC)], - [m4_ifdef([_LT_LANG_]$1[_CONFIG], - [_LT_LANG($1)], - [m4_fatal([$0: unsupported language: "$1"])])])dnl -])# LT_LANG - - -# _LT_LANG(LANGNAME) -# ------------------ -m4_defun([_LT_LANG], -[m4_ifdef([_LT_LANG_]$1[_enabled], [], - [LT_SUPPORTED_TAG([$1])dnl - m4_append([_LT_TAGS], [$1 ])dnl - m4_define([_LT_LANG_]$1[_enabled], [])dnl - _LT_LANG_$1_CONFIG($1)])dnl -])# _LT_LANG - - -# _LT_LANG_DEFAULT_CONFIG -# ----------------------- -m4_defun([_LT_LANG_DEFAULT_CONFIG], -[AC_PROVIDE_IFELSE([AC_PROG_CXX], - [LT_LANG(CXX)], - [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) - -AC_PROVIDE_IFELSE([AC_PROG_F77], - [LT_LANG(F77)], - [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) - -AC_PROVIDE_IFELSE([AC_PROG_FC], - [LT_LANG(FC)], - [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) - -dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal -dnl pulling things in needlessly. -AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [LT_LANG(GCJ)], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [LT_LANG(GCJ)], - [AC_PROVIDE_IFELSE([LT_PROG_GCJ], - [LT_LANG(GCJ)], - [m4_ifdef([AC_PROG_GCJ], - [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) - m4_ifdef([A][M_PROG_GCJ], - [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) - m4_ifdef([LT_PROG_GCJ], - [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) - -AC_PROVIDE_IFELSE([LT_PROG_RC], - [LT_LANG(RC)], - [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) -])# _LT_LANG_DEFAULT_CONFIG - -# Obsolete macros: -AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) -AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) -AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) -AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_CXX], []) -dnl AC_DEFUN([AC_LIBTOOL_F77], []) -dnl AC_DEFUN([AC_LIBTOOL_FC], []) -dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) - - -# _LT_TAG_COMPILER -# ---------------- -m4_defun([_LT_TAG_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl -_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl -_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl -_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC -])# _LT_TAG_COMPILER - - -# _LT_COMPILER_BOILERPLATE -# ------------------------ -# Check for compiler boilerplate output or warnings with -# the simple compiler test code. -m4_defun([_LT_COMPILER_BOILERPLATE], -[m4_require([_LT_DECL_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* -])# _LT_COMPILER_BOILERPLATE - - -# _LT_LINKER_BOILERPLATE -# ---------------------- -# Check for linker boilerplate output or warnings with -# the simple link test code. -m4_defun([_LT_LINKER_BOILERPLATE], -[m4_require([_LT_DECL_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* -])# _LT_LINKER_BOILERPLATE - -# _LT_REQUIRED_DARWIN_CHECKS -# ------------------------- -m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ - case $host_os in - rhapsody* | darwin*) - AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) - AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) - AC_CHECK_TOOL([LIPO], [lipo], [:]) - AC_CHECK_TOOL([OTOOL], [otool], [:]) - AC_CHECK_TOOL([OTOOL64], [otool64], [:]) - _LT_DECL([], [DSYMUTIL], [1], - [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) - _LT_DECL([], [NMEDIT], [1], - [Tool to change global to local symbols on Mac OS X]) - _LT_DECL([], [LIPO], [1], - [Tool to manipulate fat objects and archives on Mac OS X]) - _LT_DECL([], [OTOOL], [1], - [ldd/readelf like tool for Mach-O binaries on Mac OS X]) - _LT_DECL([], [OTOOL64], [1], - [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) - - AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], - [lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&AS_MESSAGE_LOG_FD - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi]) - AC_CACHE_CHECK([for -exported_symbols_list linker flag], - [lt_cv_ld_exported_symbols_list], - [lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [lt_cv_ld_exported_symbols_list=yes], - [lt_cv_ld_exported_symbols_list=no]) - LDFLAGS="$save_LDFLAGS" - ]) - case $host_os in - rhapsody* | darwin1.[[012]]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[[012]]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - if test "$DSYMUTIL" != ":"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac -]) - - -# _LT_DARWIN_LINKER_FEATURES -# -------------------------- -# Checks for linker and compiler features on darwin -m4_defun([_LT_DARWIN_LINKER_FEATURES], -[ - m4_require([_LT_REQUIRED_DARWIN_CHECKS]) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_automatic, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_TAGVAR(whole_archive_flag_spec, $1)='' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" - case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=echo - _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - m4_if([$1], [CXX], -[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then - _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" - fi -],[]) - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi -]) - -# _LT_SYS_MODULE_PATH_AIX -# ----------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -m4_defun([_LT_SYS_MODULE_PATH_AIX], -[m4_require([_LT_DECL_SED])dnl -AC_LINK_IFELSE(AC_LANG_PROGRAM,[ -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi],[]) -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -])# _LT_SYS_MODULE_PATH_AIX - - -# _LT_SHELL_INIT(ARG) -# ------------------- -m4_define([_LT_SHELL_INIT], -[ifdef([AC_DIVERSION_NOTICE], - [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) -$1 -AC_DIVERT_POP -])# _LT_SHELL_INIT - - -# _LT_PROG_ECHO_BACKSLASH -# ----------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -m4_defun([_LT_PROG_ECHO_BACKSLASH], -[_LT_SHELL_INIT([ -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$lt_ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac - -ECHO=${lt_ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then - # Yippee, $ECHO works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi - -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<_LT_EOF -[$]* -_LT_EOF - exit 0 -fi - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test -z "$lt_ECHO"; then - if test "X${echo_test_string+set}" != Xset; then - # find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if { echo_test_string=`eval $cmd`; } 2>/dev/null && - { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null - then - break - fi - done - fi - - if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : - else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - ECHO="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$ECHO" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - ECHO='print -r' - elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - ECHO='printf %s\n' - if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - ECHO="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - ECHO="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} - else - # Oops. We lost completely, so just stick with echo. - ECHO=echo - fi - fi - fi - fi - fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -lt_ECHO=$ECHO -if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi - -AC_SUBST(lt_ECHO) -]) -_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) -_LT_DECL([], [ECHO], [1], - [An echo program that does not interpret backslashes]) -])# _LT_PROG_ECHO_BACKSLASH - - -# _LT_ENABLE_LOCK -# --------------- -m4_defun([_LT_ENABLE_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AS_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -sparc*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks="$enable_libtool_lock" -])# _LT_ENABLE_LOCK - - -# _LT_CMD_OLD_ARCHIVE -# ------------------- -m4_defun([_LT_CMD_OLD_ARCHIVE], -[AC_CHECK_TOOL(AR, ar, false) -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -_LT_DECL([], [AR], [1], [The archiver]) -_LT_DECL([], [AR_FLAGS], [1]) - -AC_CHECK_TOOL(STRIP, strip, :) -test -z "$STRIP" && STRIP=: -_LT_DECL([], [STRIP], [1], [A symbol stripping program]) - -AC_CHECK_TOOL(RANLIB, ranlib, :) -test -z "$RANLIB" && RANLIB=: -_LT_DECL([], [RANLIB], [1], - [Commands used to install an old-style archive]) - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi -_LT_DECL([], [old_postinstall_cmds], [2]) -_LT_DECL([], [old_postuninstall_cmds], [2]) -_LT_TAGDECL([], [old_archive_cmds], [2], - [Commands used to build an old-style archive]) -])# _LT_CMD_OLD_ARCHIVE - - -# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([_LT_COMPILER_OPTION], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - fi - $RM conftest* -]) - -if test x"[$]$2" = xyes; then - m4_if([$5], , :, [$5]) -else - m4_if([$6], , :, [$6]) -fi -])# _LT_COMPILER_OPTION - -# Old name: -AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) - - -# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------- -# Check whether the given linker option works -AC_DEFUN([_LT_LINKER_OPTION], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $3" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - else - $2=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" -]) - -if test x"[$]$2" = xyes; then - m4_if([$4], , :, [$4]) -else - m4_if([$5], , :, [$5]) -fi -])# _LT_LINKER_OPTION - -# Old name: -AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) - - -# LT_CMD_MAX_LEN -#--------------- -AC_DEFUN([LT_CMD_MAX_LEN], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ - = "XX$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac -]) -if test -n $lt_cv_sys_max_cmd_len ; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -max_cmd_len=$lt_cv_sys_max_cmd_len -_LT_DECL([], [max_cmd_len], [0], - [What is the maximum length of a command?]) -])# LT_CMD_MAX_LEN - -# Old name: -AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) - - -# _LT_HEADER_DLFCN -# ---------------- -m4_defun([_LT_HEADER_DLFCN], -[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl -])# _LT_HEADER_DLFCN - - -# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ---------------------------------------------------------------- -m4_defun([_LT_TRY_DLOPEN_SELF], -[m4_require([_LT_HEADER_DLFCN])dnl -if test "$cross_compiling" = yes; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -[#line __oline__ "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include <dlfcn.h> -#endif - -#include <stdio.h> - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -}] -_LT_EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_dlunknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_TRY_DLOPEN_SELF - - -# LT_SYS_DLOPEN_SELF -# ------------------ -AC_DEFUN([LT_SYS_DLOPEN_SELF], -[m4_require([_LT_HEADER_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ]) - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -_LT_DECL([dlopen_support], [enable_dlopen], [0], - [Whether dlopen is supported]) -_LT_DECL([dlopen_self], [enable_dlopen_self], [0], - [Whether dlopen of programs is supported]) -_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], - [Whether dlopen of statically linked programs is supported]) -])# LT_SYS_DLOPEN_SELF - -# Old name: -AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) - - -# _LT_COMPILER_C_O([TAGNAME]) -# --------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler. -# This macro does not hard code the compiler like AC_PROG_CC_C_O. -m4_defun([_LT_COMPILER_C_O], -[m4_require([_LT_DECL_SED])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_TAG_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - chmod u+w . 2>&AS_MESSAGE_LOG_FD - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* -]) -_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], - [Does compiler simultaneously support -c and -o options?]) -])# _LT_COMPILER_C_O - - -# _LT_COMPILER_FILE_LOCKS([TAGNAME]) -# ---------------------------------- -# Check to see if we can do hard links to lock some files if needed -m4_defun([_LT_COMPILER_FILE_LOCKS], -[m4_require([_LT_ENABLE_LOCK])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -_LT_COMPILER_C_O([$1]) - -hard_links="nottested" -if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi -_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) -])# _LT_COMPILER_FILE_LOCKS - - -# _LT_CHECK_OBJDIR -# ---------------- -m4_defun([_LT_CHECK_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -_LT_DECL([], [objdir], [0], - [The name of the directory that contains temporary libtool files])dnl -m4_pattern_allow([LT_OBJDIR])dnl -AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", - [Define to the sub-directory in which libtool stores uninstalled libraries.]) -])# _LT_CHECK_OBJDIR - - -# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) -# -------------------------------------- -# Check hardcoding attributes. -m4_defun([_LT_LINKER_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || - test -n "$_LT_TAGVAR(runpath_var, $1)" || - test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then - - # We can hardcode non-existent directories. - if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then - # Linking always hardcodes the temporary library directory. - _LT_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) - -if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || - test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -_LT_TAGDECL([], [hardcode_action], [0], - [How to hardcode a shared library path into an executable]) -])# _LT_LINKER_HARDCODE_LIBPATH - - -# _LT_CMD_STRIPLIB -# ---------------- -m4_defun([_LT_CMD_STRIPLIB], -[m4_require([_LT_DECL_EGREP]) -striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - fi - ;; - *) - AC_MSG_RESULT([no]) - ;; - esac -fi -_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) -_LT_DECL([], [striplib], [1]) -])# _LT_CMD_STRIPLIB - - -# _LT_SYS_DYNAMIC_LINKER([TAG]) -# ----------------------------- -# PORTME Fill in your ld.so characteristics -m4_defun([_LT_SYS_DYNAMIC_LINKER], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_OBJDUMP])dnl -m4_require([_LT_DECL_SED])dnl -AC_MSG_CHECKING([dynamic linker characteristics]) -m4_if([$1], - [], [ -if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` - else - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[[lt_foo]]++; } - if (lt_freq[[lt_foo]] == 1) { print lt_foo; } -}'` - sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix[[4-9]]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib<name>.so - # instead of lib<name>.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[[45]]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' -m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[[123]]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[[01]]* | freebsdelf3.[[01]]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ - freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -interix[[3-9]]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # Some binutils ld are patched to set DT_RUNPATH - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ - LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], - [shlibpath_overrides_runpath=yes])]) - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsdelf*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='NetBSD ld.elf_so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -fi - -_LT_DECL([], [variables_saved_for_relink], [1], - [Variables whose values should be saved in libtool wrapper scripts and - restored at link time]) -_LT_DECL([], [need_lib_prefix], [0], - [Do we need the "lib" prefix for modules?]) -_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) -_LT_DECL([], [version_type], [0], [Library versioning type]) -_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) -_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) -_LT_DECL([], [shlibpath_overrides_runpath], [0], - [Is shlibpath searched before the hard-coded library search path?]) -_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) -_LT_DECL([], [library_names_spec], [1], - [[List of archive names. First name is the real one, the rest are links. - The last name is the one that the linker finds with -lNAME]]) -_LT_DECL([], [soname_spec], [1], - [[The coded name of the library, if different from the real name]]) -_LT_DECL([], [postinstall_cmds], [2], - [Command to use after installation of a shared archive]) -_LT_DECL([], [postuninstall_cmds], [2], - [Command to use after uninstallation of a shared archive]) -_LT_DECL([], [finish_cmds], [2], - [Commands used to finish a libtool library installation in a directory]) -_LT_DECL([], [finish_eval], [1], - [[As "finish_cmds", except a single script fragment to be evaled but - not shown]]) -_LT_DECL([], [hardcode_into_libs], [0], - [Whether we should hardcode library paths into libraries]) -_LT_DECL([], [sys_lib_search_path_spec], [2], - [Compile-time system search path for libraries]) -_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], - [Run-time system search path for libraries]) -])# _LT_SYS_DYNAMIC_LINKER - - -# _LT_PATH_TOOL_PREFIX(TOOL) -# -------------------------- -# find a file program which can recognize shared library -AC_DEFUN([_LT_PATH_TOOL_PREFIX], -[m4_require([_LT_DECL_EGREP])dnl -AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="m4_if([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -_LT_DECL([], [MAGIC_CMD], [0], - [Used to examine libraries when file_magic_cmd begins with "file"])dnl -])# _LT_PATH_TOOL_PREFIX - -# Old name: -AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) - - -# _LT_PATH_MAGIC -# -------------- -# find a file program which can recognize a shared library -m4_defun([_LT_PATH_MAGIC], -[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) - else - MAGIC_CMD=: - fi -fi -])# _LT_PATH_MAGIC - - -# LT_PATH_LD -# ---------- -# find the pathname to the GNU or non-GNU linker -AC_DEFUN([LT_PATH_LD], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl - -AC_ARG_WITH([gnu-ld], - [AS_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no])dnl - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in - *GNU* | *'with BFD'*) - test "$with_gnu_ld" != no && break - ;; - *) - test "$with_gnu_ld" != yes && break - ;; - esac - fi - done - IFS="$lt_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$lt_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -_LT_PATH_LD_GNU -AC_SUBST([LD]) - -_LT_TAGDECL([], [LD], [1], [The linker used to build libraries]) -])# LT_PATH_LD - -# Old names: -AU_ALIAS([AM_PROG_LD], [LT_PATH_LD]) -AU_ALIAS([AC_PROG_LD], [LT_PATH_LD]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_PROG_LD], []) -dnl AC_DEFUN([AC_PROG_LD], []) - - -# _LT_PATH_LD_GNU -#- -------------- -m4_defun([_LT_PATH_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 </dev/null` in -*GNU* | *'with BFD'*) - lt_cv_prog_gnu_ld=yes - ;; -*) - lt_cv_prog_gnu_ld=no - ;; -esac]) -with_gnu_ld=$lt_cv_prog_gnu_ld -])# _LT_PATH_LD_GNU - - -# _LT_CMD_RELOAD -# -------------- -# find reload flag for linker -# -- PORTME Some linkers may need a different reload flag. -m4_defun([_LT_CMD_RELOAD], -[AC_CACHE_CHECK([for $LD option to reload object files], - lt_cv_ld_reload_flag, - [lt_cv_ld_reload_flag='-r']) -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac -_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl -_LT_DECL([], [reload_cmds], [2])dnl -])# _LT_CMD_RELOAD - - -# _LT_CHECK_MAGIC_METHOD -# ---------------------- -# how to check for library dependencies -# -- PORTME fill in with the dynamic library characteristics -m4_defun([_LT_CHECK_MAGIC_METHOD], -[m4_require([_LT_DECL_EGREP]) -m4_require([_LT_DECL_OBJDUMP]) -AC_CACHE_CHECK([how to recognize dependent libraries], -lt_cv_deplibs_check_method, -[lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[[4-9]]*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi[[45]]*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[[3-9]]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - -_LT_DECL([], [deplibs_check_method], [1], - [Method to check whether dependent libraries are shared objects]) -_LT_DECL([], [file_magic_cmd], [1], - [Command to use when deplibs_check_method == "file_magic"]) -])# _LT_CHECK_MAGIC_METHOD - - -# LT_PATH_NM -# ---------- -# find the pathname to a BSD- or MS-compatible name lister -AC_DEFUN([LT_PATH_NM], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - : ${lt_cv_path_NM=no} -fi]) -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" -else - # Didn't find any BSD compatible name lister, look for dumpbin. - AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) - AC_SUBST([DUMPBIN]) - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" - fi -fi -test -z "$NM" && NM=nm -AC_SUBST([NM]) -_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl - -AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], - [lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) - cat conftest.out >&AS_MESSAGE_LOG_FD - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest*]) -])# LT_PATH_NM - -# Old names: -AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) -AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_PROG_NM], []) -dnl AC_DEFUN([AC_PROG_NM], []) - - -# LT_LIB_M -# -------- -# check for math library -AC_DEFUN([LT_LIB_M], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, cos, LIBM="-lm") - ;; -esac -AC_SUBST([LIBM]) -])# LT_LIB_M - -# Old name: -AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_CHECK_LIBM], []) - - -# _LT_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------- -m4_defun([_LT_COMPILER_NO_RTTI], -[m4_require([_LT_TAG_COMPILER])dnl - -_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -if test "$GCC" = yes; then - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - - _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions], [], - [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], - [Compiler flag to turn off builtin functions]) -])# _LT_COMPILER_NO_RTTI - - -# _LT_CMD_GLOBAL_SYMBOLS -# ---------------------- -m4_defun([_LT_CMD_GLOBAL_SYMBOLS], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([LT_PATH_NM])dnl -AC_REQUIRE([LT_PATH_LD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_TAG_COMPILER])dnl - -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) - if test "$host_cpu" = ia64; then - symcode='[[ABCDEGRST]]' - fi - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -osf*) - symcode='[[BCDEGQRST]]' - ;; -solaris*) - symcode='[[BDRT]]' - ;; -sco3.2v5*) - symcode='[[DT]]' - ;; -sysv4.2uw2*) - symcode='[[DT]]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[[ABDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[[ABCDGIRSTW]]' ;; -esac - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK ['"\ -" {last_section=section; section=\$ 3};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx]" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if AC_TRY_EVAL(ac_compile); then - # Now try to grab the symbols. - nlist=conftest.nm - if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[[]] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi - -_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], - [Take the output of nm and produce a listing of raw symbols and C names]) -_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], - [Transform the output of nm in a proper C declaration]) -_LT_DECL([global_symbol_to_c_name_address], - [lt_cv_sys_global_symbol_to_c_name_address], [1], - [Transform the output of nm in a C name address pair]) -_LT_DECL([global_symbol_to_c_name_address_lib_prefix], - [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], - [Transform the output of nm in a C name address pair when lib prefix is needed]) -]) # _LT_CMD_GLOBAL_SYMBOLS - - -# _LT_COMPILER_PIC([TAGNAME]) -# --------------------------- -m4_defun([_LT_COMPILER_PIC], -[m4_require([_LT_TAG_COMPILER])dnl -_LT_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_TAGVAR(lt_prog_compiler_static, $1)= - -AC_MSG_CHECKING([for $compiler option to produce PIC]) -m4_if([$1], [CXX], [ - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - case $host_os in - aix[[4-9]]*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68*) - # Green Hills C++ Compiler - # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - ghcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - freebsd* | dragonfly*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - if test "$host_cpu" != ia64; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - aCC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - interix*) - # This is c89, which is MS Visual C++ (no shared libs) - # Anyone wants to do a port? - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - KCC*) - # KAI C++ Compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - ecpc* ) - # old Intel C++ for x86_64 which still supported -KPIC. - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - icpc* ) - # Intel C++, used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - cxx*) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - xlc* | xlC*) - # IBM XL 8.0 on PPC - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - esac - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd* | netbsdelf*-gnu) - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - ;; - RCC*) - # Rational C++ 2.4.1 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - cxx*) - # Digital/Compaq C++ - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - lcc*) - # Lucid - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - *) - ;; - esac - ;; - vxworks*) - ;; - *) - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -], -[ - if test "$GCC" = yes; then - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - - hpux9* | hpux10* | hpux11*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. - ecc*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' - _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - ccc*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All Alpha code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - xl*) - # IBM XL C 8.0/Fortran 10.1 on PPC - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - *Sun\ F*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='' - ;; - esac - ;; - esac - ;; - - newsos6) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - rdos*) - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - solaris*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; - *) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; - esac - ;; - - sunos4*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - unicos*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - - uts4*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *) - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -]) -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" - ;; -esac -AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) -_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], - [How to pass a linker flag through the compiler]) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then - _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], - [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], - [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], - [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], - [Additional compiler flags for building library objects]) - -# -# Check to make sure the static flag actually works. -# -wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" -_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], - _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), - $lt_tmp_static_flag, - [], - [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) -_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], - [Compiler flag to prevent dynamic linking]) -])# _LT_COMPILER_PIC - - -# _LT_LINKER_SHLIBS([TAGNAME]) -# ---------------------------- -# See if the linker supports building shared libraries. -m4_defun([_LT_LINKER_SHLIBS], -[AC_REQUIRE([LT_PATH_LD])dnl -AC_REQUIRE([LT_PATH_NM])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -m4_require([_LT_TAG_COMPILER])dnl -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -m4_if([$1], [CXX], [ - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix[[4-9]]*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; - cygwin* | mingw* | cegcc*) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - ;; - linux* | k*bsd*-gnu) - _LT_TAGVAR(link_all_deplibs, $1)=no - ;; - *) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] -], [ - runpath_var= - _LT_TAGVAR(allow_undefined_flag, $1)= - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(archive_cmds, $1)= - _LT_TAGVAR(archive_expsym_cmds, $1)= - _LT_TAGVAR(compiler_needs_object, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - _LT_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(hardcode_automatic, $1)=no - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= - _LT_TAGVAR(hardcode_libdir_separator, $1)= - _LT_TAGVAR(hardcode_minus_L, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_TAGVAR(inherit_rpath, $1)=no - _LT_TAGVAR(link_all_deplibs, $1)=unknown - _LT_TAGVAR(module_cmds, $1)= - _LT_TAGVAR(module_expsym_cmds, $1)= - _LT_TAGVAR(old_archive_from_new_cmds, $1)= - _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_TAGVAR(thread_safe_flag_spec, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. -dnl Note also adjust exclude_expsyms for C++ above. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - linux* | k*bsd*-gnu) - _LT_TAGVAR(link_all_deplibs, $1)=no - ;; - esac - - _LT_TAGVAR(ld_shlibs, $1)=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - supports_anon_versioning=no - case `$LD -v 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[[3-9]]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='' - ;; - m68k) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach <jrb3@best.com> says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test "$host_os" = linux-dietlibc; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no - then - tmp_addflag= - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - _LT_TAGVAR(whole_archive_flag_spec, $1)= - tmp_sharedflag='--shared' ;; - xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - xlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' - _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - sunos4*) - _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - - if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then - runpath_var= - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; - - aix[[4-9]]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_TAGVAR(archive_cmds, $1)='' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' - - if test "$GCC" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - _LT_TAGVAR(link_all_deplibs, $1)=no - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='' - ;; - m68k) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - ;; - - bsdi[[45]]*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' - _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; - - dgux*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - freebsd1*) - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - hpux9*) - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - AC_LINK_IFELSE(int foo(void) {}, - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - ) - LDFLAGS="$save_LDFLAGS" - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(inherit_rpath, $1)=yes - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - newsos6) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *nto* | *qnx*) - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac - fi - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - os2*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - solaris*) - _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - fi - ;; - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4) - case $host_vendor in - sni) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' - _LT_TAGVAR(hardcode_direct, $1)=no - ;; - motorola) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4.3*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_TAGVAR(ld_shlibs, $1)=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - - if test x$host_vendor = xsni; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' - ;; - esac - fi - fi -]) -AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) -test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld - -_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl -_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl -_LT_DECL([], [extract_expsyms_cmds], [2], - [The commands to extract the exported symbol list from a shared archive]) - -# -# Do we need to explicitly link libc? -# -case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in -x|xyes) - # Assume -lc should be added - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) - pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) - _LT_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) - then - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - else - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) - ;; - esac - fi - ;; -esac - -_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], - [Whether or not to add -lc for building shared libraries]) -_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], - [enable_shared_with_static_runtimes], [0], - [Whether or not to disallow shared libs when runtime libs are static]) -_LT_TAGDECL([], [export_dynamic_flag_spec], [1], - [Compiler flag to allow reflexive dlopens]) -_LT_TAGDECL([], [whole_archive_flag_spec], [1], - [Compiler flag to generate shared objects directly from archives]) -_LT_TAGDECL([], [compiler_needs_object], [1], - [Whether the compiler copes with passing no objects directly]) -_LT_TAGDECL([], [old_archive_from_new_cmds], [2], - [Create an old-style archive from a shared archive]) -_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], - [Create a temporary old-style archive to link instead of a shared archive]) -_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) -_LT_TAGDECL([], [archive_expsym_cmds], [2]) -_LT_TAGDECL([], [module_cmds], [2], - [Commands used to build a loadable module if different from building - a shared archive.]) -_LT_TAGDECL([], [module_expsym_cmds], [2]) -_LT_TAGDECL([], [with_gnu_ld], [1], - [Whether we are building with GNU ld or not]) -_LT_TAGDECL([], [allow_undefined_flag], [1], - [Flag that allows shared libraries with undefined symbols to be built]) -_LT_TAGDECL([], [no_undefined_flag], [1], - [Flag that enforces no undefined symbols]) -_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], - [Flag to hardcode $libdir into a binary during linking. - This must work even if $libdir does not exist]) -_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], - [[If ld is used when linking, flag to hardcode $libdir into a binary - during linking. This must work even if $libdir does not exist]]) -_LT_TAGDECL([], [hardcode_libdir_separator], [1], - [Whether we need a single "-rpath" flag with a separated argument]) -_LT_TAGDECL([], [hardcode_direct], [0], - [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes - DIR into the resulting binary]) -_LT_TAGDECL([], [hardcode_direct_absolute], [0], - [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes - DIR into the resulting binary and the resulting library dependency is - "absolute", i.e impossible to change by setting ${shlibpath_var} if the - library is relocated]) -_LT_TAGDECL([], [hardcode_minus_L], [0], - [Set to "yes" if using the -LDIR flag during linking hardcodes DIR - into the resulting binary]) -_LT_TAGDECL([], [hardcode_shlibpath_var], [0], - [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR - into the resulting binary]) -_LT_TAGDECL([], [hardcode_automatic], [0], - [Set to "yes" if building a shared library automatically hardcodes DIR - into the library and all subsequent libraries and executables linked - against it]) -_LT_TAGDECL([], [inherit_rpath], [0], - [Set to yes if linker adds runtime paths of dependent libraries - to runtime path list]) -_LT_TAGDECL([], [link_all_deplibs], [0], - [Whether libtool must link a program against all its dependency libraries]) -_LT_TAGDECL([], [fix_srcfile_path], [1], - [Fix the shell variable $srcfile for the compiler]) -_LT_TAGDECL([], [always_export_symbols], [0], - [Set to "yes" if exported symbols are required]) -_LT_TAGDECL([], [export_symbols_cmds], [2], - [The commands to list exported symbols]) -_LT_TAGDECL([], [exclude_expsyms], [1], - [Symbols that should not be listed in the preloaded symbols]) -_LT_TAGDECL([], [include_expsyms], [1], - [Symbols that must always be exported]) -_LT_TAGDECL([], [prelink_cmds], [2], - [Commands necessary for linking programs (against libraries) with templates]) -_LT_TAGDECL([], [file_list_spec], [1], - [Specify filename containing input files]) -dnl FIXME: Not yet implemented -dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], -dnl [Compiler flag to generate thread safe objects]) -])# _LT_LINKER_SHLIBS - - -# _LT_LANG_C_CONFIG([TAG]) -# ------------------------ -# Ensure that the configuration variables for a C compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. -m4_defun([_LT_LANG_C_CONFIG], -[m4_require([_LT_DECL_EGREP])dnl -lt_save_CC="$CC" -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - -_LT_TAG_COMPILER -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - LT_SYS_DLOPEN_SELF - _LT_CMD_STRIPLIB - - # Report which library types will actually be built - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_CONFIG($1) -fi -AC_LANG_POP -CC="$lt_save_CC" -])# _LT_LANG_C_CONFIG - - -# _LT_PROG_CXX -# ------------ -# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ -# compiler, we have our own version here. -m4_defun([_LT_PROG_CXX], -[ -pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) -AC_PROG_CXX -if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - AC_PROG_CXXCPP -else - _lt_caught_CXX_error=yes -fi -popdef([AC_MSG_ERROR]) -])# _LT_PROG_CXX - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([_LT_PROG_CXX], []) - - -# _LT_LANG_CXX_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a C++ compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. -m4_defun([_LT_LANG_CXX_CONFIG], -[AC_REQUIRE([_LT_PROG_CXX])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl - -AC_LANG_PUSH(C++) -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(compiler_needs_object, $1)=no -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for C++ test sources. -ac_ext=cpp - -# Object file extension for compiled C++ test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the CXX compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_caught_CXX_error" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="int some_variable = 0;" - - # Code to be used in simple link tests - lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC=$CC - lt_save_LD=$LD - lt_save_GCC=$GCC - GCC=$GXX - lt_save_with_gnu_ld=$with_gnu_ld - lt_save_path_LD=$lt_cv_path_LD - if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx - else - $as_unset lt_cv_prog_gnu_ld - fi - if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX - else - $as_unset lt_cv_path_LD - fi - test -z "${LDCXX+set}" || LD=$LDCXX - CC=${CXX-"c++"} - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - - if test -n "$compiler"; then - # We don't want -fno-exception when compiling C++ code, so set the - # no_builtin_flag separately - if test "$GXX" = yes; then - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - else - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - fi - - if test "$GXX" = yes; then - # Set up default GNU C++ configuration - - LT_PATH_LD - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | - $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' - - else - GXX=no - with_gnu_ld=no - wlarc= - fi - - # PORTME: fill in a description of your system's C++ link characteristics - AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) - _LT_TAGVAR(ld_shlibs, $1)=yes - case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aix[[4-9]]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_TAGVAR(archive_cmds, $1)='' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' - - if test "$GXX" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to - # export. - _LT_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty - # executable. - _LT_SYS_MODULE_PATH_AIX - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared - # libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach <jrb3@best.com> says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; - - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - freebsd[[12]]*) - # C++ shared libraries reported to be fairly broken before - # switch to ELF - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - freebsd-elf*) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - - freebsd* | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - - gnu*) - ;; - - hpux9*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' - ;; - *) - if test "$GXX" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - esac - fi - case $host_cpu in - hppa*64*|ia64*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' - fi - fi - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(inherit_rpath, $1)=yes - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc* | ecpc* ) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - case `$CC -V` in - *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) - _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' - _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ - $RANLIB $oldlib' - _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; - *) # Version 6 will use weak symbols - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' - ;; - xl*) - # IBM XL 8.0 on PPC, with GNU ld - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - - # Not sure whether something based on - # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 - # would be better. - output_verbose_link_cmd='echo' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - esac - ;; - esac - ;; - - lynxos*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - m88k*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - - *nto* | *qnx*) - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - - openbsd2*) - # C++ shared libraries are fairly broken - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi - output_verbose_link_cmd=echo - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - case $host in - osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; - *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; - esac - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - cxx*) - case $host in - osf3*) - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - ;; - *) - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ - $RM $lib.exp' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - case $host in - osf3*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - psos*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(archive_cmds_need_lc,$1)=yes - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - ;; - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - - output_verbose_link_cmd='echo' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' - if $CC --version | $GREP -v '^2\.7' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' - fi - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - fi - ;; - esac - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - vxworks*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - - AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) - test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - - _LT_TAGVAR(GCC, $1)="$GXX" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_SYS_HIDDEN_LIBDEPS($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - CC=$lt_save_CC - LDCXX=$LD - LD=$lt_save_LD - GCC=$lt_save_GCC - with_gnu_ld=$lt_save_with_gnu_ld - lt_cv_path_LDCXX=$lt_cv_path_LD - lt_cv_path_LD=$lt_save_path_LD - lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld - lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -fi # test "$_lt_caught_CXX_error" != yes - -AC_LANG_POP -])# _LT_LANG_CXX_CONFIG - - -# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) -# --------------------------------- -# Figure out "hidden" library dependencies from verbose -# compiler output when linking a shared library. -# Parse the compiler output and extract the necessary -# objects, libraries and library flags. -m4_defun([_LT_SYS_HIDDEN_LIBDEPS], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -# Dependencies to place before and after the object being linked: -_LT_TAGVAR(predep_objects, $1)= -_LT_TAGVAR(postdep_objects, $1)= -_LT_TAGVAR(predeps, $1)= -_LT_TAGVAR(postdeps, $1)= -_LT_TAGVAR(compiler_lib_search_path, $1)= - -dnl we can't use the lt_simple_compile_test_code here, -dnl because it contains code intended for an executable, -dnl not a library. It's possible we should let each -dnl tag define a new lt_????_link_test_code variable, -dnl but it's only used here... -m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF -int a; -void foo (void) { a = 0; } -_LT_EOF -], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF -class Foo -{ -public: - Foo (void) { a = 0; } -private: - int a; -}; -_LT_EOF -], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer*4 a - a=0 - return - end -_LT_EOF -], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer a - a=0 - return - end -_LT_EOF -], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF -public class foo { - private int a; - public void bar (void) { - a = 0; - } -}; -_LT_EOF -]) -dnl Parse the compiler output and extract the necessary -dnl objects, libraries and library flags. -if AC_TRY_EVAL(ac_compile); then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - - for p in `eval "$output_verbose_link_cmd"`; do - case $p in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test $p = "-L" || - test $p = "-R"; then - prev=$p - continue - else - prev= - fi - - if test "$pre_test_object_deps_done" = no; then - case $p in - -L* | -R*) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then - _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" - else - _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$_LT_TAGVAR(postdeps, $1)"; then - _LT_TAGVAR(postdeps, $1)="${prev}${p}" - else - _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" - fi - fi - ;; - - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - - if test "$pre_test_object_deps_done" = no; then - if test -z "$_LT_TAGVAR(predep_objects, $1)"; then - _LT_TAGVAR(predep_objects, $1)="$p" - else - _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" - fi - else - if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then - _LT_TAGVAR(postdep_objects, $1)="$p" - else - _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" - fi - fi - ;; - - *) ;; # Ignore the rest. - - esac - done - - # Clean up. - rm -f a.out a.exe -else - echo "libtool.m4: error: problem compiling $1 test program" -fi - -$RM -f confest.$objext - -# PORTME: override above test on systems where it is broken -m4_if([$1], [CXX], -[case $host_os in -interix[[3-9]]*) - # Interix 3.5 installs completely hosed .la files for C++, so rather than - # hack all around it, let's just trust "g++" to DTRT. - _LT_TAGVAR(predep_objects,$1)= - _LT_TAGVAR(postdep_objects,$1)= - _LT_TAGVAR(postdeps,$1)= - ;; - -linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - if test "$solaris_use_stlport4" != yes; then - _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; - -solaris*) - case $cc_basename in - CC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - if test "$solaris_use_stlport4" != yes; then - _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; -esac -]) - -case " $_LT_TAGVAR(postdeps, $1) " in -*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; -esac - _LT_TAGVAR(compiler_lib_search_dirs, $1)= -if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then - _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` -fi -_LT_TAGDECL([], [compiler_lib_search_dirs], [1], - [The directories searched by this compiler when creating a shared library]) -_LT_TAGDECL([], [predep_objects], [1], - [Dependencies to place before and after the objects being linked to - create a shared library]) -_LT_TAGDECL([], [postdep_objects], [1]) -_LT_TAGDECL([], [predeps], [1]) -_LT_TAGDECL([], [postdeps], [1]) -_LT_TAGDECL([], [compiler_lib_search_path], [1], - [The library search path used internally by the compiler when linking - a shared library]) -])# _LT_SYS_HIDDEN_LIBDEPS - - -# _LT_PROG_F77 -# ------------ -# Since AC_PROG_F77 is broken, in that it returns the empty string -# if there is no fortran compiler, we have our own version here. -m4_defun([_LT_PROG_F77], -[ -pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) -AC_PROG_F77 -if test -z "$F77" || test "X$F77" = "Xno"; then - _lt_disable_F77=yes -fi -popdef([AC_MSG_ERROR]) -])# _LT_PROG_F77 - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([_LT_PROG_F77], []) - - -# _LT_LANG_F77_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a Fortran 77 compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_F77_CONFIG], -[AC_REQUIRE([_LT_PROG_F77])dnl -AC_LANG_PUSH(Fortran 77) - -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for f77 test sources. -ac_ext=f - -# Object file extension for compiled f77 test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the F77 compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_F77" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC="$CC" - lt_save_GCC=$GCC - CC=${F77-"f77"} - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - GCC=$G77 - if test -n "$compiler"; then - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_TAGVAR(GCC, $1)="$G77" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - GCC=$lt_save_GCC - CC="$lt_save_CC" -fi # test "$_lt_disable_F77" != yes - -AC_LANG_POP -])# _LT_LANG_F77_CONFIG - - -# _LT_PROG_FC -# ----------- -# Since AC_PROG_FC is broken, in that it returns the empty string -# if there is no fortran compiler, we have our own version here. -m4_defun([_LT_PROG_FC], -[ -pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) -AC_PROG_FC -if test -z "$FC" || test "X$FC" = "Xno"; then - _lt_disable_FC=yes -fi -popdef([AC_MSG_ERROR]) -])# _LT_PROG_FC - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([_LT_PROG_FC], []) - - -# _LT_LANG_FC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for a Fortran compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_FC_CONFIG], -[AC_REQUIRE([_LT_PROG_FC])dnl -AC_LANG_PUSH(Fortran) - -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for fc test sources. -ac_ext=${ac_fc_srcext-f} - -# Object file extension for compiled fc test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the FC compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_FC" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC="$CC" - lt_save_GCC=$GCC - CC=${FC-"f95"} - compiler=$CC - GCC=$ac_cv_fc_compiler_gnu - - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - - if test -n "$compiler"; then - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_SYS_HIDDEN_LIBDEPS($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - GCC=$lt_save_GCC - CC="$lt_save_CC" -fi # test "$_lt_disable_FC" != yes - -AC_LANG_POP -])# _LT_LANG_FC_CONFIG - - -# _LT_LANG_GCJ_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for the GNU Java Compiler compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_GCJ_CONFIG], -[AC_REQUIRE([LT_PROG_GCJ])dnl -AC_LANG_SAVE - -# Source file extension for Java test sources. -ac_ext=java - -# Object file extension for compiled Java test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="class foo {}" - -# Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -lt_save_GCC=$GCC -GCC=yes -CC=${GCJ-"gcj"} -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_TAGVAR(LD, $1)="$LD" -_LT_CC_BASENAME([$compiler]) - -# GCJ did not exist at the time GCC didn't implicitly link libc in. -_LT_TAGVAR(archive_cmds_need_lc, $1)=no - -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds - -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) -fi - -AC_LANG_RESTORE - -GCC=$lt_save_GCC -CC="$lt_save_CC" -])# _LT_LANG_GCJ_CONFIG - - -# _LT_LANG_RC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for the Windows resource compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_RC_CONFIG], -[AC_REQUIRE([LT_PROG_RC])dnl -AC_LANG_SAVE - -# Source file extension for RC test sources. -ac_ext=rc - -# Object file extension for compiled RC test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' - -# Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -lt_save_GCC=$GCC -GCC= -CC=${RC-"windres"} -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) -_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - -if test -n "$compiler"; then - : - _LT_CONFIG($1) -fi - -GCC=$lt_save_GCC -AC_LANG_RESTORE -CC="$lt_save_CC" -])# _LT_LANG_RC_CONFIG - - -# LT_PROG_GCJ -# ----------- -AC_DEFUN([LT_PROG_GCJ], -[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], - [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], - [AC_CHECK_TOOL(GCJ, gcj,) - test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" - AC_SUBST(GCJFLAGS)])])[]dnl -]) - -# Old name: -AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_GCJ], []) - - -# LT_PROG_RC -# ---------- -AC_DEFUN([LT_PROG_RC], -[AC_CHECK_TOOL(RC, windres,) -]) - -# Old name: -AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_RC], []) - - -# _LT_DECL_EGREP -# -------------- -# If we don't have a new enough Autoconf to choose the best grep -# available, choose the one first in the user's PATH. -m4_defun([_LT_DECL_EGREP], -[AC_REQUIRE([AC_PROG_EGREP])dnl -AC_REQUIRE([AC_PROG_FGREP])dnl -test -z "$GREP" && GREP=grep -_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) -_LT_DECL([], [EGREP], [1], [An ERE matcher]) -_LT_DECL([], [FGREP], [1], [A literal string matcher]) -dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too -AC_SUBST([GREP]) -]) - - -# _LT_DECL_OBJDUMP -# -------------- -# If we don't have a new enough Autoconf to choose the best objdump -# available, choose the one first in the user's PATH. -m4_defun([_LT_DECL_OBJDUMP], -[AC_CHECK_TOOL(OBJDUMP, objdump, false) -test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) -AC_SUBST([OBJDUMP]) -]) - - -# _LT_DECL_SED -# ------------ -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -m4_defun([_LT_DECL_SED], -[AC_PROG_SED -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" -_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) -_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], - [Sed that helps us avoid accidentally triggering echo(1) options like -n]) -])# _LT_DECL_SED - -m4_ifndef([AC_PROG_SED], [ -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # - -m4_defun([AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done -]) -SED=$lt_cv_path_SED -AC_SUBST([SED]) -AC_MSG_RESULT([$SED]) -])#AC_PROG_SED -])#m4_ifndef - -# Old name: -AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_SED], []) - - -# _LT_CHECK_SHELL_FEATURES -# ------------------------ -# Find out whether the shell is Bourne or XSI compatible, -# or has some other useful features. -m4_defun([_LT_CHECK_SHELL_FEATURES], -[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -AC_MSG_RESULT([$xsi_shell]) -_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) - -AC_MSG_CHECKING([whether the shell understands "+="]) -lt_shell_append=no -( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -AC_MSG_RESULT([$lt_shell_append]) -_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi -_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac -_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl -_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl -])# _LT_CHECK_SHELL_FEATURES - - -# _LT_PROG_XSI_SHELLFNS -# --------------------- -# Bourne and XSI compatible variants of some useful shell functions. -m4_defun([_LT_PROG_XSI_SHELLFNS], -[case $xsi_shell in - yes) - cat << \_LT_EOF >> "$cfgfile" - -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac -} - -# func_basename file -func_basename () -{ - func_basename_result="${1##*/}" -} - -# func_dirname_and_basename file append nondir_replacement -# perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# Implementation must be kept synchronized with func_dirname -# and func_basename. For efficiency, we do not delegate to -# those functions but instead duplicate the functionality here. -func_dirname_and_basename () -{ - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac - func_basename_result="${1##*/}" -} - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -func_stripname () -{ - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary parameter first. - func_stripname_result=${3} - func_stripname_result=${func_stripname_result#"${1}"} - func_stripname_result=${func_stripname_result%"${2}"} -} - -# func_opt_split -func_opt_split () -{ - func_opt_split_opt=${1%%=*} - func_opt_split_arg=${1#*=} -} - -# func_lo2o object -func_lo2o () -{ - case ${1} in - *.lo) func_lo2o_result=${1%.lo}.${objext} ;; - *) func_lo2o_result=${1} ;; - esac -} - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=${1%.*}.lo -} - -# func_arith arithmetic-term... -func_arith () -{ - func_arith_result=$(( $[*] )) -} - -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=${#1} -} - -_LT_EOF - ;; - *) # Bourne compatible functions. - cat << \_LT_EOF >> "$cfgfile" - -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi -} - -# func_basename file -func_basename () -{ - func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` -} - -dnl func_dirname_and_basename -dnl A portable version of this function is already defined in general.m4sh -dnl so there is no need for it here. - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# func_strip_suffix prefix name -func_stripname () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "X${3}" \ - | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "X${3}" \ - | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; - esac -} - -# sed scripts: -my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q' -my_sed_long_arg='1s/^-[[^=]]*=//' - -# func_opt_split -func_opt_split () -{ - func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` - func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` -} - -# func_lo2o object -func_lo2o () -{ - func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` -} - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` -} - -# func_arith arithmetic-term... -func_arith () -{ - func_arith_result=`expr "$[@]"` -} - -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` -} - -_LT_EOF -esac - -case $lt_shell_append in - yes) - cat << \_LT_EOF >> "$cfgfile" - -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () -{ - eval "$[1]+=\$[2]" -} -_LT_EOF - ;; - *) - cat << \_LT_EOF >> "$cfgfile" - -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () -{ - eval "$[1]=\$$[1]\$[2]" -} - -_LT_EOF - ;; - esac -]) - -# Helper functions for option handling. -*- Autoconf -*- -# -# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 6 ltoptions.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) - - -# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) -# ------------------------------------------ -m4_define([_LT_MANGLE_OPTION], -[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) - - -# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) -# --------------------------------------- -# Set option OPTION-NAME for macro MACRO-NAME, and if there is a -# matching handler defined, dispatch to it. Other OPTION-NAMEs are -# saved as a flag. -m4_define([_LT_SET_OPTION], -[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl -m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), - _LT_MANGLE_DEFUN([$1], [$2]), - [m4_warning([Unknown $1 option `$2'])])[]dnl -]) - - -# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) -# ------------------------------------------------------------ -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -m4_define([_LT_IF_OPTION], -[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) - - -# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) -# ------------------------------------------------------- -# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME -# are set. -m4_define([_LT_UNLESS_OPTIONS], -[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), - [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), - [m4_define([$0_found])])])[]dnl -m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 -])[]dnl -]) - - -# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) -# ---------------------------------------- -# OPTION-LIST is a space-separated list of Libtool options associated -# with MACRO-NAME. If any OPTION has a matching handler declared with -# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about -# the unknown option and exit. -m4_defun([_LT_SET_OPTIONS], -[# Set options -m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), - [_LT_SET_OPTION([$1], _LT_Option)]) - -m4_if([$1],[LT_INIT],[ - dnl - dnl Simply set some default values (i.e off) if boolean options were not - dnl specified: - _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no - ]) - _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no - ]) - dnl - dnl If no reference was made to various pairs of opposing options, then - dnl we run the default mode handler for the pair. For example, if neither - dnl `shared' nor `disable-shared' was passed, we enable building of shared - dnl archives by default: - _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) - _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) - _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) - _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], - [_LT_ENABLE_FAST_INSTALL]) - ]) -])# _LT_SET_OPTIONS - - - -# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) -# ----------------------------------------- -m4_define([_LT_MANGLE_DEFUN], -[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) - - -# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) -# ----------------------------------------------- -m4_define([LT_OPTION_DEFINE], -[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl -])# LT_OPTION_DEFINE - - -# dlopen -# ------ -LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes -]) - -AU_DEFUN([AC_LIBTOOL_DLOPEN], -[_LT_SET_OPTION([LT_INIT], [dlopen]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `dlopen' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) - - -# win32-dll -# --------- -# Declare package support for building win32 dll's. -LT_OPTION_DEFINE([LT_INIT], [win32-dll], -[enable_win32_dll=yes - -case $host in -*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; -esac - -test -z "$AS" && AS=as -_LT_DECL([], [AS], [0], [Assembler program])dnl - -test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl - -test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl -])# win32-dll - -AU_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -_LT_SET_OPTION([LT_INIT], [win32-dll]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `win32-dll' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) - - -# _LT_ENABLE_SHARED([DEFAULT]) -# ---------------------------- -# implement the --enable-shared flag, and supports the `shared' and -# `disable-shared' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_SHARED], -[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([shared], - [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) - - _LT_DECL([build_libtool_libs], [enable_shared], [0], - [Whether or not to build shared libraries]) -])# _LT_ENABLE_SHARED - -LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) - -# Old names: -AC_DEFUN([AC_ENABLE_SHARED], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) -]) - -AC_DEFUN([AC_DISABLE_SHARED], -[_LT_SET_OPTION([LT_INIT], [disable-shared]) -]) - -AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_ENABLE_SHARED], []) -dnl AC_DEFUN([AM_DISABLE_SHARED], []) - - - -# _LT_ENABLE_STATIC([DEFAULT]) -# ---------------------------- -# implement the --enable-static flag, and support the `static' and -# `disable-static' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_STATIC], -[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([static], - [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_static=]_LT_ENABLE_STATIC_DEFAULT) - - _LT_DECL([build_old_libs], [enable_static], [0], - [Whether or not to build static libraries]) -])# _LT_ENABLE_STATIC - -LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) - -# Old names: -AC_DEFUN([AC_ENABLE_STATIC], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) -]) - -AC_DEFUN([AC_DISABLE_STATIC], -[_LT_SET_OPTION([LT_INIT], [disable-static]) -]) - -AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_ENABLE_STATIC], []) -dnl AC_DEFUN([AM_DISABLE_STATIC], []) - - - -# _LT_ENABLE_FAST_INSTALL([DEFAULT]) -# ---------------------------------- -# implement the --enable-fast-install flag, and support the `fast-install' -# and `disable-fast-install' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_FAST_INSTALL], -[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([fast-install], - [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) - -_LT_DECL([fast_install], [enable_fast_install], [0], - [Whether or not to optimize for fast installation])dnl -])# _LT_ENABLE_FAST_INSTALL - -LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) - -# Old names: -AU_DEFUN([AC_ENABLE_FAST_INSTALL], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `fast-install' option into LT_INIT's first parameter.]) -]) - -AU_DEFUN([AC_DISABLE_FAST_INSTALL], -[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `disable-fast-install' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) -dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) - - -# _LT_WITH_PIC([MODE]) -# -------------------- -# implement the --with-pic flag, and support the `pic-only' and `no-pic' -# LT_INIT options. -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -m4_define([_LT_WITH_PIC], -[AC_ARG_WITH([pic], - [AS_HELP_STRING([--with-pic], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [pic_mode="$withval"], - [pic_mode=default]) - -test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) - -_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl -])# _LT_WITH_PIC - -LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) -LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) - -# Old name: -AU_DEFUN([AC_LIBTOOL_PICMODE], -[_LT_SET_OPTION([LT_INIT], [pic-only]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `pic-only' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) - - -m4_define([_LTDL_MODE], []) -LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], - [m4_define([_LTDL_MODE], [nonrecursive])]) -LT_OPTION_DEFINE([LTDL_INIT], [recursive], - [m4_define([_LTDL_MODE], [recursive])]) -LT_OPTION_DEFINE([LTDL_INIT], [subproject], - [m4_define([_LTDL_MODE], [subproject])]) - -m4_define([_LTDL_TYPE], []) -LT_OPTION_DEFINE([LTDL_INIT], [installable], - [m4_define([_LTDL_TYPE], [installable])]) -LT_OPTION_DEFINE([LTDL_INIT], [convenience], - [m4_define([_LTDL_TYPE], [convenience])]) - -# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- -# -# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 6 ltsugar.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) - - -# lt_join(SEP, ARG1, [ARG2...]) -# ----------------------------- -# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their -# associated separator. -# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier -# versions in m4sugar had bugs. -m4_define([lt_join], -[m4_if([$#], [1], [], - [$#], [2], [[$2]], - [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) -m4_define([_lt_join], -[m4_if([$#$2], [2], [], - [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) - - -# lt_car(LIST) -# lt_cdr(LIST) -# ------------ -# Manipulate m4 lists. -# These macros are necessary as long as will still need to support -# Autoconf-2.59 which quotes differently. -m4_define([lt_car], [[$1]]) -m4_define([lt_cdr], -[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], - [$#], 1, [], - [m4_dquote(m4_shift($@))])]) -m4_define([lt_unquote], $1) - - -# lt_append(MACRO-NAME, STRING, [SEPARATOR]) -# ------------------------------------------ -# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. -# Note that neither SEPARATOR nor STRING are expanded; they are appended -# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). -# No SEPARATOR is output if MACRO-NAME was previously undefined (different -# than defined and empty). -# -# This macro is needed until we can rely on Autoconf 2.62, since earlier -# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. -m4_define([lt_append], -[m4_define([$1], - m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) - - - -# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) -# ---------------------------------------------------------- -# Produce a SEP delimited list of all paired combinations of elements of -# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list -# has the form PREFIXmINFIXSUFFIXn. -# Needed until we can rely on m4_combine added in Autoconf 2.62. -m4_define([lt_combine], -[m4_if(m4_eval([$# > 3]), [1], - [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl -[[m4_foreach([_Lt_prefix], [$2], - [m4_foreach([_Lt_suffix], - ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, - [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) - - -# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) -# ----------------------------------------------------------------------- -# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited -# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. -m4_define([lt_if_append_uniq], -[m4_ifdef([$1], - [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], - [lt_append([$1], [$2], [$3])$4], - [$5])], - [lt_append([$1], [$2], [$3])$4])]) - - -# lt_dict_add(DICT, KEY, VALUE) -# ----------------------------- -m4_define([lt_dict_add], -[m4_define([$1($2)], [$3])]) - - -# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) -# -------------------------------------------- -m4_define([lt_dict_add_subkey], -[m4_define([$1($2:$3)], [$4])]) - - -# lt_dict_fetch(DICT, KEY, [SUBKEY]) -# ---------------------------------- -m4_define([lt_dict_fetch], -[m4_ifval([$3], - m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), - m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) - - -# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) -# ----------------------------------------------------------------- -m4_define([lt_if_dict_fetch], -[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], - [$5], - [$6])]) - - -# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) -# -------------------------------------------------------------- -m4_define([lt_dict_filter], -[m4_if([$5], [], [], - [lt_join(m4_quote(m4_default([$4], [[, ]])), - lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), - [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl -]) - -# ltversion.m4 -- version numbers -*- Autoconf -*- -# -# Copyright (C) 2004 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# Generated from ltversion.in. - -# serial 3017 ltversion.m4 -# This file is part of GNU Libtool - -m4_define([LT_PACKAGE_VERSION], [2.2.6b]) -m4_define([LT_PACKAGE_REVISION], [1.3017]) - -AC_DEFUN([LTVERSION_VERSION], -[macro_version='2.2.6b' -macro_revision='1.3017' -_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) -_LT_DECL(, macro_revision, 0) -]) - -# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- -# -# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004. -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 4 lt~obsolete.m4 - -# These exist entirely to fool aclocal when bootstrapping libtool. -# -# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) -# which have later been changed to m4_define as they aren't part of the -# exported API, or moved to Autoconf or Automake where they belong. -# -# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN -# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us -# using a macro with the same name in our local m4/libtool.m4 it'll -# pull the old libtool.m4 in (it doesn't see our shiny new m4_define -# and doesn't know about Autoconf macros at all.) -# -# So we provide this file, which has a silly filename so it's always -# included after everything else. This provides aclocal with the -# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything -# because those macros already exist, or will be overwritten later. -# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. -# -# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. -# Yes, that means every name once taken will need to remain here until -# we give up compatibility with versions before 1.7, at which point -# we need to keep only those names which we still refer to. - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) - -m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) -m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) -m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) -m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) -m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) -m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) -m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) -m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) -m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) -m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) -m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) -m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) -m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) -m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) -m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) -m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) -m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) -m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) -m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) -m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) -m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) -m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) -m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) -m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) -m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) -m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) -m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) -m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) -m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) -m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) -m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) -m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) -m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) -m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) -m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) -m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) -m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) -m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])]) -m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) -m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) -m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) -m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) -m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) -m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) -m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) -m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) - # nls.m4 serial 5 (gettext-0.18) dnl Copyright (C) 1995-2003, 2005-2006, 2008-2010 Free Software Foundation, dnl Inc. @@ -8673,7 +513,8 @@ AC_DEFUN([AM_NLS], # ---------------------------------- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) -m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) +m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) +m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) @@ -8719,7 +560,8 @@ m4_define([_PKG_CONFIG], pkg_cv_[]$1="$$1" elif test -n "$PKG_CONFIG"; then PKG_CHECK_EXISTS([$3], - [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], + [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes ], [pkg_failed=yes]) else pkg_failed=untried @@ -8767,9 +609,9 @@ if test $pkg_failed = yes; then AC_MSG_RESULT([no]) _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then - $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1` + $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` else - $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1` + $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD @@ -9847,3 +1689,9 @@ AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR +m4_include([m4/intltool.m4]) +m4_include([m4/libtool.m4]) +m4_include([m4/ltoptions.m4]) +m4_include([m4/ltsugar.m4]) +m4_include([m4/ltversion.m4]) +m4_include([m4/lt~obsolete.m4]) |