Stop using ConsoleKit and UPower for session tracking and shutdown/reboot/suspend/hibernate; migrate to logind.

Approved by Mathieu Trudel-Lapierre, PS Jenkins bot.

1 files changed, 0 insertions, 309 deletions

diff --git a/src/upower.xml b/src/upower.xml
deleted file mode 100644
index 18d5fbd..0000000
--- a/src/upower.xml
+++ /dev/null
@@ -1,309 +0,0 @@
-<!DOCTYPE node PUBLIC
-"-//freedesktop//DTD D-BUS Object Introspection 1.0//EN"
-"http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd">
-<node name="/" xmlns:doc="http://www.freedesktop.org/dbus/1.0/doc.dtd">
-
-  <interface name="org.freedesktop.UPower">
-    <doc:doc>
-      <doc:description>
-        <doc:para>
-          The DeviceKit-power service is available via the system message
-          bus. To access the service, use
-          the <doc:tt>org.freedesktop.UPower</doc:tt> interface on
-          the <doc:tt>/org/freedesktop/UPower</doc:tt> object on
-          the D-Bus system bus service with the well-known
-          name <doc:tt>org.freedesktop.UPower</doc:tt>.
-        </doc:para>
-        <doc:para>
-          <doc:example language="shell" title="simple example">
-            <doc:code>
-$ dbus-send --print-reply \
-            --system \
-            --dest=org.freedesktop.UPower \
-            /org/freedesktop/UPower \
-            org.freedesktop.UPower.EnumerateDevices
-
-method return sender=:1.386 -> dest=:1.451 reply_serial=2
-   array [
-      object path "/org/freedesktop/UPower/devices/line_power_AC"
-      object path "/org/freedesktop/UPower/devices/battery_BAT0"
-   ]
-            </doc:code>
-          </doc:example>
-        </doc:para>
-      </doc:description>
-    </doc:doc>
-
-    <!-- ************************************************************ -->
-
-    <method name="EnumerateDevices">
-      <annotation name="org.freedesktop.DBus.GLib.Async" value=""/>
-      <arg name="devices" direction="out" type="ao">
-        <doc:doc><doc:summary>An array of object paths for devices.</doc:summary></doc:doc>
-      </arg>
-
-      <doc:doc>
-        <doc:description>
-          <doc:para>
-            Enumerate all power objects on the system.
-          </doc:para>
-        </doc:description>
-      </doc:doc>
-    </method>
-
-    <!-- ************************************************************ -->
-
-    <signal name="DeviceAdded">
-      <arg name="device" type="o">
-        <doc:doc><doc:summary>Object path of device that was added.</doc:summary></doc:doc>
-      </arg>
-
-      <doc:doc>
-        <doc:description>
-          <doc:para>
-            Emitted when a device is added.
-          </doc:para>
-        </doc:description>
-      </doc:doc>
-    </signal>
-
-    <!-- ************************************************************ -->
-
-    <signal name="DeviceRemoved">
-      <arg name="device" type="o">
-        <doc:doc><doc:summary>Object path of device that was removed.</doc:summary></doc:doc>
-      </arg>
-
-      <doc:doc>
-        <doc:description>
-          <doc:para>
-            Emitted when a device is removed.
-          </doc:para>
-        </doc:description>
-      </doc:doc>
-    </signal>
-
-    <!-- ************************************************************ -->
-
-    <signal name="DeviceChanged">
-      <arg name="device" type="s">
-        <doc:doc><doc:summary>Object path of device that was changed.</doc:summary></doc:doc>
-      </arg>
-
-      <doc:doc>
-        <doc:description>
-          <doc:para>
-            Emitted when a device changed.
-          </doc:para>
-        </doc:description>
-      </doc:doc>
-    </signal>
-
-    <!-- ************************************************************ -->
-
-    <signal name="Changed">
-      <doc:doc>
-        <doc:description>
-          <doc:para>
-            Emitted when one or more properties on the object changes.
-          </doc:para>
-        </doc:description>
-      </doc:doc>
-    </signal>
-
-    <!-- ************************************************************ -->
-
-    <signal name="Sleeping">
-      <doc:doc>
-        <doc:description>
-          <doc:para>
-            This signal is sent when the session is about to be suspended or
-            hibernated.
-            Session and system programs have one second to do anything required
-            before the sleep action is taken (such as sending out Avahi or
-            Jabber messages).
-          </doc:para>
-        </doc:description>
-      </doc:doc>
-    </signal>
-
-    <!-- ************************************************************ -->
-
-    <signal name="Resuming">
-      <doc:doc>
-        <doc:description>
-          <doc:para>
-            This signal is sent when the session has just returned from
-            Suspend() or Hibernate().
-            Session and system programs can then do anything required (such as
-            sending out Avahi or Jabber messages).
-          </doc:para>
-        </doc:description>
-      </doc:doc>
-    </signal>
-
-    <!-- ************************************************************ -->
-
-    <method name="AboutToSleep">
-      <annotation name="org.freedesktop.DBus.GLib.Async" value=""/>
-      <doc:doc>
-        <doc:description>
-          <doc:para>
-            This method tells UPower that the Suspend() or Hibernate() method
-            is about to be called.
-            This allows UPower to emit the Suspending signal whilst
-            session activities are happening that have to be done before the
-            suspend process is started.
-          </doc:para>
-          <doc:para>
-            This method would typically be called by the session power
-            management daemon, before it locks the screen and waits for the
-            screen to fade to black.
-            The session power management component would then call Suspend() or
-            Hibernate() when these syncronous tasks have completed.
-          </doc:para>
-          <doc:para>
-            If this method is not called than nothing bad will happen and
-            Suspend() or Hibernate() will block for the required second.
-          </doc:para>
-        </doc:description>
-      </doc:doc>
-    </method>
-
-    <!-- ************************************************************ -->
-
-    <method name="Suspend">
-      <annotation name="org.freedesktop.DBus.GLib.Async" value=""/>
-      <doc:doc>
-        <doc:description>
-          <doc:para>
-            Suspends the computer into a low power state.
-            System state is not preserved if the power is lost.
-          </doc:para>
-          <doc:para>
-            If AboutToRequestSleep() has not been called then UPower will send
-            the Sleeping() signal and block for one second.
-          </doc:para>
-          <doc:para>
-            If AboutToRequestSleep() has been called less than one second
-            before this method is called then UPower will block for the
-            remaining time to complete one second of delay.
-          </doc:para>
-        </doc:description>
-      </doc:doc>
-    </method>
-
-    <!-- ************************************************************ -->
-
-    <method name="SuspendAllowed">
-      <annotation name="org.freedesktop.DBus.GLib.Async" value=""/>
-      <arg name="allowed" direction="out" type="b">
-        <doc:doc><doc:summary>TRUE if allowed, otherwise FALSE</doc:summary></doc:doc>
-      </arg>
-      <doc:doc>
-        <doc:description>
-          <doc:para>
-            Check if the caller has (or can get) the PolicyKit privilege to call
-            <doc:ref type="method" to="Power.Suspend">Suspend</doc:ref>.
-          </doc:para>
-        </doc:description>
-      </doc:doc>
-    </method>
-
-    <!-- ************************************************************ -->
-
-    <method name="Hibernate">
-      <annotation name="org.freedesktop.DBus.GLib.Async" value=""/>
-      <doc:doc>
-        <doc:description>
-          <doc:para>
-            Hibernates the computer into a low power state.
-            System state is preserved if the power is lost.
-          </doc:para>
-          <doc:para>
-            If AboutToRequestSleep() has not been called then UPower will send
-            the Sleeping() signal and block for one second.
-          </doc:para>
-          <doc:para>
-            If AboutToRequestSleep() has been called less than one second
-            before this method is called then UPower will block for the
-            remaining time to complete one second of delay.
-          </doc:para>
-        </doc:description>
-      </doc:doc>
-    </method>
-
-    <!-- ************************************************************ -->
-
-    <method name="HibernateAllowed">
-      <annotation name="org.freedesktop.DBus.GLib.Async" value=""/>
-      <arg name="allowed" direction="out" type="b">
-        <doc:doc><doc:summary>TRUE if allowed, otherwise FALSE</doc:summary></doc:doc>
-      </arg>
-      <doc:doc>
-        <doc:description>
-          <doc:para>
-            Check if the caller has (or can get) the PolicyKit privilege to call
-            <doc:ref type="method" to="Power.Hibernate">Hibernate</doc:ref>.
-          </doc:para>
-        </doc:description>
-      </doc:doc>
-    </method>
-
-    <!-- ************************************************************ -->
-
-    <property name="DaemonVersion" type="s" access="read">
-      <doc:doc><doc:description><doc:para>
-            Version of the running daemon, e.g. <doc:tt>002</doc:tt>.
-      </doc:para></doc:description></doc:doc>
-    </property>
-
-    <property name="CanSuspend" type="b" access="read">
-      <doc:doc><doc:description><doc:para>
-            Whether the system is able to suspend.
-      </doc:para></doc:description></doc:doc>
-    </property>
-
-    <property name="CanHibernate" type="b" access="read">
-      <doc:doc><doc:description><doc:para>
-            Whether the system is able to hibernate.
-      </doc:para></doc:description></doc:doc>
-    </property>
-
-    <property name="OnBattery" type="b" access="read">
-      <doc:doc><doc:description><doc:para>
-            Indicates whether the system is running on battery power.
-            This property is provided for convenience.
-      </doc:para></doc:description></doc:doc>
-    </property>
-
-    <property name="OnLowBattery" type="b" access="read">
-      <doc:doc><doc:description><doc:para>
-            Indicates whether the system is running on battery power and if the battery is critically low.
-            This property is provided for convenience.
-      </doc:para></doc:description></doc:doc>
-    </property>
-
-    <property name="LidIsClosed" type="b" access="read">
-      <doc:doc>
-        <doc:description>
-          <doc:para>
-            Indicates if the laptop lid is closed where the display cannot be seen.
-          </doc:para>
-        </doc:description>
-      </doc:doc>
-    </property>
-
-    <property name="LidIsPresent" type="b" access="read">
-      <doc:doc>
-        <doc:description>
-          <doc:para>
-            If the system has a lid device.
-          </doc:para>
-        </doc:description>
-      </doc:doc>
-    </property>
-
-  </interface>
-
-</node>