1 files changed, 838 insertions, 0 deletions

diff --git a/bindings/mono/Makefile.in b/bindings/mono/Makefile.in
new file mode 100644
index 0000000..e8d4335
--- /dev/null
+++ b/bindings/mono/Makefile.in
@@ -0,0 +1,838 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = bindings/mono
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(srcdir)/appindicator-sharp-0.1.pc.in \
+	$(srcdir)/appindicator-sharp.dll.config.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = appindicator-sharp.dll.config \
+	appindicator-sharp-0.1.pc
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN   " $@;
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(assemblydir)" \
+	"$(DESTDIR)$(pkgconfigdir)"
+DATA = $(assembly_DATA) $(pkgconfig_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AL = @AL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+APPINDICATOR_PYTHON_CFLAGS = @APPINDICATOR_PYTHON_CFLAGS@
+APPINDICATOR_PYTHON_LIBS = @APPINDICATOR_PYTHON_LIBS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CSC = @CSC@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GACUTIL = @GACUTIL@
+GAPI_CFLAGS = @GAPI_CFLAGS@
+GAPI_CODEGEN = @GAPI_CODEGEN@
+GAPI_FIXUP = @GAPI_FIXUP@
+GAPI_LIBS = @GAPI_LIBS@
+GAPI_PARSER = @GAPI_PARSER@
+GENERATED_SOURCES = @GENERATED_SOURCES@
+GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
+GLIB_MKENUMS = @GLIB_MKENUMS@
+GREP = @GREP@
+GTKDOC_CHECK = @GTKDOC_CHECK@
+GTKDOC_MKPDF = @GTKDOC_MKPDF@
+GTKDOC_REBASE = @GTKDOC_REBASE@
+GTK_SHARP_CFLAGS = @GTK_SHARP_CFLAGS@
+GTK_SHARP_LIBS = @GTK_SHARP_LIBS@
+HTML_DIR = @HTML_DIR@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@
+INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@
+INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@
+INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@
+INTROSPECTION_LIBS = @INTROSPECTION_LIBS@
+INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@
+INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@
+INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBRARY_CFLAGS = @LIBRARY_CFLAGS@
+LIBRARY_LIBS = @LIBRARY_LIBS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIB_PREFIX = @LIB_PREFIX@
+LIB_SUFFIX = @LIB_SUFFIX@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MONO_DEPENDENCY_CFLAGS = @MONO_DEPENDENCY_CFLAGS@
+MONO_DEPENDENCY_LIBS = @MONO_DEPENDENCY_LIBS@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NUNIT_CFLAGS = @NUNIT_CFLAGS@
+NUNIT_LIBS = @NUNIT_LIBS@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PYGTK_CODEGEN = @PYGTK_CODEGEN@
+PYGTK_DEFSDIR = @PYGTK_DEFSDIR@
+PYTHON = @PYTHON@
+PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
+PYTHON_INCLUDES = @PYTHON_INCLUDES@
+PYTHON_PLATFORM = @PYTHON_PLATFORM@
+PYTHON_PREFIX = @PYTHON_PREFIX@
+PYTHON_VERSION = @PYTHON_VERSION@
+RANLIB = @RANLIB@
+RUNTIME = @RUNTIME@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TESTDEPS_CFLAGS = @TESTDEPS_CFLAGS@
+TESTDEPS_LIBS = @TESTDEPS_LIBS@
+VALAC = @VALAC@
+VALA_API_GEN = @VALA_API_GEN@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgpyexecdir = @pkgpyexecdir@
+pkgpythondir = @pkgpythondir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+pyexecdir = @pyexecdir@
+pythondir = @pythondir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = . examples
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = appindicator-sharp-0.1.pc
+TEST = AppIndicator.Test.dll
+API = libappindicator-api.xml
+MIDDLE_API = libappindicator-api.middle
+RAW_API = libappindicator-api.raw
+METADATA = libappindicator-api.metadata
+ASSEMBLY_NAME = appindicator-sharp
+ASSEMBLY_VERSION = 0.2.0.0
+ASSEMBLY = $(ASSEMBLY_NAME).dll
+POLICY = policy.$(POLICY_VERSION).$(ASSEMBLY_NAME)
+POLICY_VERSION = 0.0
+DLLPOLICY = $(POLICY).dll
+POLICY1 = policy.$(POLICY1_VERSION).$(ASSEMBLY_NAME)
+POLICY1_VERSION = 0.1
+DLLPOLICY1 = $(POLICY1).dll
+WRAPPER_FREE_BINDING_SRC = $(top_srcdir)/src/app-indicator.c
+WRAPPER_FREE_BINDING = app-indicator.c
+TARGET = \
+	$(ASSEMBLY) \
+	$(ASSEMBLY).config \
+	$(DLLPOLICY) \
+	$(POLICY).config \
+	$(DLLPOLICY1) \
+	$(POLICY1).config
+
+assemblydir = $(libdir)/cli/appindicator-sharp-0.1
+assembly_DATA = $(TARGET)
+CLEANFILES = \
+	$(ASSEMBLY) \
+	$(ASSEMBLY).mdb \
+	generated-stamp \
+	generated/*.cs \
+	$(API) \
+	$(MIDDLE_API) \
+	$(RAW_API) \
+	$(TEST) \
+	$(DLLPOLICY) \
+	$(DLLPOLICY1) \
+	$(WRAPPER_FREE_BINDING) \
+	$(POLICY).config \
+	$(POLICY1).config
+
+DISTCLEANFILES = $(ASSEMBLY).config
+TEST_SOURCES = TestIndicator.cs
+customs = ApplicationIndicator.custom
+EXTRA_DIST = \
+	AssemblyInfo.cs \
+	$(RAW_API)				\
+	$(METADATA)				\
+	appindicator-sharp-0.1.pc.in		\
+	appindicator-sharp.dll.config.in	\
+	app-indicator.sources.xml		\
+	$(ASSEMBLY_NAME).snk			\
+	$(POLICY).config.in \
+	$(POLICY1).config.in \
+	$(customs)				\
+	$(TEST_SOURCES)
+
+GACUTIL_FLAGS = -package $(ASSEMBLY_NAME) -root $(DESTDIR)$(prefix)/lib
+references = $(GTK_SHARP_LIBS)
+test_references = $(GTK_SHARP_LIBS) $(NUNIT_LIBS) -r:$(ASSEMBLY)
+api_includes = $(GTK_SHARP_CFLAGS)
+build_customs = $(addprefix $(srcdir)/, $(customs))
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu bindings/mono/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu bindings/mono/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+appindicator-sharp.dll.config: $(top_builddir)/config.status $(srcdir)/appindicator-sharp.dll.config.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+appindicator-sharp-0.1.pc: $(top_builddir)/config.status $(srcdir)/appindicator-sharp-0.1.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-assemblyDATA: $(assembly_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(assemblydir)" || $(MKDIR_P) "$(DESTDIR)$(assemblydir)"
+	@list='$(assembly_DATA)'; test -n "$(assemblydir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(assemblydir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(assemblydir)" || exit $$?; \
+	done
+
+uninstall-assemblyDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(assembly_DATA)'; test -n "$(assemblydir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(assemblydir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(assemblydir)" && rm -f $$files
+install-pkgconfigDATA: $(pkgconfig_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
+	done
+
+uninstall-pkgconfigDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(assemblydir)" "$(DESTDIR)$(pkgconfigdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-assemblyDATA install-data-local \
+	install-pkgconfigDATA
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-assemblyDATA uninstall-local \
+	uninstall-pkgconfigDATA
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am check check-am clean clean-generic clean-libtool \
+	ctags ctags-recursive distclean distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-assemblyDATA \
+	install-data install-data-am install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am uninstall-assemblyDATA uninstall-local \
+	uninstall-pkgconfigDATA
+
+
+$(RAW_API): app-indicator.sources.xml $(WRAPPER_FREE_BINDING)
+	$(GAPI_PARSER) $(srcdir)/app-indicator.sources.xml
+
+$(WRAPPER_FREE_BINDING): $(WRAPPER_FREE_BINDING_SRC)
+	sed '/signals\[X_NEW_LABEL\] /,+6d' $(WRAPPER_FREE_BINDING_SRC) > $(WRAPPER_FREE_BINDING)
+
+$(MIDDLE_API): $(METADATA) $(RAW_API)
+	cp $(srcdir)/$(RAW_API) $(MIDDLE_API)
+	chmod u+w $(MIDDLE_API)
+	@if test -n '$(METADATA)'; then							\
+		echo "$(GAPI_FIXUP) --api=$(MIDDLE_API) --metadata=$(srcdir)/$(METADATA)"; 	\
+		$(GAPI_FIXUP) --api=$(MIDDLE_API) --metadata=$(srcdir)/$(METADATA);		\
+	fi
+
+$(API): $(MIDDLE_API) Makefile.am
+	sed -e "s|PROP_ID_S|id|" \
+		-e "s|PROP_STATUS_S|status|" \
+		-e "s|PROP_CATEGORY_S|Category|" \
+		-e "s|PROP_CATEGORY_S|category|" \
+		-e "s|PROP_ICON_NAME_S|icon-name|" \
+		-e "s|PROP_ICON_DESC_S|IconDesc|" \
+		-e "s|PROP_ICON_DESC_S|icon-desc|" \
+		-e "s|PROP_ATTENTION_ICON_NAME_S|attention-icon-name|" \
+		-e "s|PROP_ATTENTION_ICON_DESC_S|AttentionIconDesc|" \
+		-e "s|PROP_ATTENTION_ICON_DESC_S|attention-icon-desc|" \
+		-e "s|PROP_ICON_THEME_PATH_S|icon-theme-path|" \
+		-e "s|PROP_MENU_S|menu|" \
+		-e "s|PROP_CONNECTED_S|connected|" \
+		-e "s|PROP_LABEL_S|label|" \
+		-e "s|PROP_LABEL_GUIDE_S|label-guide|" \
+		-e "s|PROP_ORDERING_INDEX_S|ordering-index|" \
+		-e "s|PROP_DBUS_MENU_SERVER_S|DbusMenuServer|" \
+		-e "s|PROP_DBUS_MENU_SERVER_S|dbus-menu-server|" \
+		$< > $@
+
+generated-stamp: $(API) $(build_customs)
+	rm -f generated/* &&					\
+	$(GAPI_CODEGEN) --generate $(API) $(api_includes)	\
+	--customdir=$(srcdir)					\
+	--outdir=generated --assembly-name=$(ASSEMBLY_NAME)	\
+	&& touch generated-stamp
+
+$(ASSEMBLY): generated-stamp $(srcdir)/AssemblyInfo.cs
+	@rm -f $(ASSEMBLY).mdb
+	$(CSC) $(CSFLAGS) -keyfile:$(srcdir)/$(ASSEMBLY_NAME).snk -nowarn:0169,0612,0618 -unsafe -out:$(ASSEMBLY) -target:library $(references) $(builddir)/$(GENERATED_SOURCES) $(srcdir)/AssemblyInfo.cs
+
+install-data-local:
+	echo "$(GACUTIL) -i $(ASSEMBLY_NAME).dll $(GACUTIL_FLAGS)";  \
+            $(GACUTIL) -i $(ASSEMBLY_NAME).dll $(GACUTIL_FLAGS) || exit 1;
+	echo "$(GACUTIL) -i $(DLLPOLICY) $(GACUTIL_FLAGS)";  \
+            $(GACUTIL) -i $(DLLPOLICY) $(GACUTIL_FLAGS) || exit 1;
+
+uninstall-local:
+	echo "$(GACUTIL) -u $(ASSEMBLY_NAME) $(GACUTIL_FLAGS)"; \
+            $(GACUTIL) -u $(ASSEMBLY_NAME) $(GACUTIL_FLAGS) || exit 1;
+	echo "$(GACUTIL) -u $(DLLPOLICY) $(GACUTIL_FLAGS)";  \
+            $(GACUTIL) -u $(POLICY) $(GACUTIL_FLAGS) || exit 1;
+
+$(TEST): $(ASSEMBLY) $(TEST_SOURCES)
+	$(CSC) -out:$(TEST) -target:library $(test_references) $(srcdir)/$(TEST_SOURCES)
+
+all: $(TEST)
+
+$(POLICY).config: $(POLICY).config.in Makefile
+	sed -e "s|@ASSEMBLY_NAME@|$(ASSEMBLY_NAME)|" \
+		-e "s|@ASSEMBLY_VERSION@|$(ASSEMBLY_VERSION)|g" \
+		$< > $@
+
+$(DLLPOLICY): $(POLICY).config $(ASSEMBLY_NAME).snk Makefile
+	$(AL) -link:$(POLICY).config -out:$(DLLPOLICY) -keyfile:$(srcdir)/$(ASSEMBLY_NAME).snk
+
+$(POLICY1).config: $(POLICY1).config.in Makefile
+	sed -e "s|@ASSEMBLY_NAME@|$(ASSEMBLY_NAME)|" \
+		-e "s|@ASSEMBLY_VERSION@|$(ASSEMBLY_VERSION)|g" \
+		$< > $@
+
+$(DLLPOLICY1): $(POLICY1).config $(ASSEMBLY_NAME).snk Makefile
+	$(AL) -link:$(POLICY1).config -out:$(DLLPOLICY1) -keyfile:$(srcdir)/$(ASSEMBLY_NAME).snk
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: