Add patch: 018_nx-x11_update-libtool-ltmain-script.patch. Silence lintian warning ancient-libtool via lintian override as we patch in a new version of ltmain.sh by this patch.

3 files changed, 13983 insertions, 0 deletions

diff --git a/debian/changelog b/debian/changelog
index f63142a3a..742813330 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -35,6 +35,9 @@ nx-libs (2:3.5.0-0~x2go2) UNRELEASED; urgency=low
   * Add lintian-override: outdated-autotools-helper-file to
     source.lintian-overrides as we patch-update the outdated helper files before
     building binaries.
+  * Add patch: 018_nx-x11_update-libtool-ltmain-script.patch. Silence lintian warning
+    ancient-libtool via lintian override as we patch in a new version of ltmain.sh
+    by this patch.
 
  -- Mike Gabriel <mike.gabriel@das-netzwerkteam.de>  Wed, 28 Dec 2011 19:06:26 +0100
 
diff --git a/debian/patches/018_nx-x11_update-libtool-ltmain-script.patch b/debian/patches/018_nx-x11_update-libtool-ltmain-script.patch
new file mode 100644
index 000000000..be4a44e71
--- /dev/null
+++ b/debian/patches/018_nx-x11_update-libtool-ltmain-script.patch
@@ -0,0 +1,13979 @@
+--- a/nx-X11/extras/expat/conftools/ltmain.sh
++++ b/nx-X11/extras/expat/conftools/ltmain.sh
+@@ -1,4631 +1,9435 @@
+-# ltmain.sh - Provide generalized library-building support services.
+-# NOTE: Changing this file will not affect anything until you rerun configure.
+-#
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+-# Free Software Foundation, Inc.
+-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+-#
+-# This program is free software; you can redistribute it and/or modify
++
++# libtool (GNU libtool) 2.4
++# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
++
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
++# 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
++# This is free software; see the source for copying conditions.  There is NO
++# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
++
++# GNU Libtool is free software; you can redistribute it and/or modify
+ # it under the terms of the GNU General Public License as published by
+ # the Free Software Foundation; either version 2 of the License, or
+ # (at your option) any later version.
+ #
+-# This program is distributed in the hope that it will be useful, but
++# As a special exception to the GNU General Public License,
++# if you distribute this file as part of a program or library that
++# is built using GNU Libtool, you may include this file under the
++# same distribution terms that you use for the rest of that program.
++#
++# GNU Libtool is distributed in the hope that it will be useful, but
+ # WITHOUT ANY WARRANTY; without even the implied warranty of
+ # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ # General Public License for more details.
+ #
+ # You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++# along with GNU Libtool; see the file COPYING.  If not, a copy
++# can be downloaded from http://www.gnu.org/licenses/gpl.html,
++# or obtained by writing to the Free Software Foundation, Inc.,
++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++
++# Usage: $progname [OPTION]... [MODE-ARG]...
+ #
+-# As a special exception to the GNU General Public License, if you
+-# distribute this file as part of a program that contains a
+-# configuration script generated by Autoconf, you may include it under
+-# the same distribution terms that you use for the rest of that program.
+-
+-# Check that we have a working $echo.
+-if test "X$1" = X--no-reexec; then
+-  # Discard the --no-reexec flag, and continue.
+-  shift
+-elif test "X$1" = X--fallback-echo; then
+-  # Avoid inline document here, it may be left over
+-  :
+-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+-  # Yippee, $echo works!
+-  :
++# Provide generalized library-building support services.
++#
++#       --config             show all configuration variables
++#       --debug              enable verbose shell tracing
++#   -n, --dry-run            display commands without modifying any files
++#       --features           display basic configuration information and exit
++#       --mode=MODE          use operation mode MODE
++#       --preserve-dup-deps  don't remove duplicate dependency libraries
++#       --quiet, --silent    don't print informational messages
++#       --no-quiet, --no-silent
++#                            print informational messages (default)
++#       --tag=TAG            use configuration variables from tag TAG
++#   -v, --verbose            print more informational messages than default
++#       --no-verbose         don't print the extra informational messages
++#       --version            print version information
++#   -h, --help, --help-all   print short, long, or detailed help message
++#
++# MODE must be one of the following:
++#
++#         clean              remove files from the build directory
++#         compile            compile a source file into a libtool object
++#         execute            automatically set library path, then run a program
++#         finish             complete the installation of libtool libraries
++#         install            install libraries or executables
++#         link               create a library or an executable
++#         uninstall          remove libraries from an installed directory
++#
++# MODE-ARGS vary depending on the MODE.  When passed as first option,
++# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
++# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
++#
++# When reporting a bug, please describe a test case to reproduce it and
++# include the following information:
++#
++#         host-triplet:	$host
++#         shell:		$SHELL
++#         compiler:		$LTCC
++#         compiler flags:		$LTCFLAGS
++#         linker:		$LD (gnu? $with_gnu_ld)
++#         $progname:	(GNU libtool) 2.4 Debian-2.4-2
++#         automake:	$automake_version
++#         autoconf:	$autoconf_version
++#
++# Report bugs to <bug-libtool@gnu.org>.
++# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
++# General help using GNU software: <http://www.gnu.org/gethelp/>.
++
++PROGRAM=libtool
++PACKAGE=libtool
++VERSION="2.4 Debian-2.4-2"
++TIMESTAMP=""
++package_revision=1.3293
++
++# Be Bourne compatible
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++  emulate sh
++  NULLCMD=:
++  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
++  # is contrary to our usage.  Disable this feature.
++  alias -g '${1+"$@"}'='"$@"'
++  setopt NO_GLOB_SUBST
+ else
+-  # Restart under the correct shell, and then maybe $echo will work.
+-  exec $SHELL "$0" --no-reexec ${1+"$@"}
++  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+ fi
++BIN_SH=xpg4; export BIN_SH # for Tru64
++DUALCASE=1; export DUALCASE # for MKS sh
+ 
+-if test "X$1" = X--fallback-echo; then
+-  # used as fallback echo
+-  shift
+-  cat <<EOF
+-$*
+-EOF
+-  exit 0
+-fi
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++  eval 'cat <<_LTECHO_EOF
++$1
++_LTECHO_EOF'
++}
+ 
+-# The name of this program.
+-progname=`$echo "$0" | sed 's%^.*/%%'`
+-modename="$progname"
++# NLS nuisances: We save the old values to restore during execute mode.
++lt_user_locale=
++lt_safe_locale=
++for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
++do
++  eval "if test \"\${$lt_var+set}\" = set; then
++          save_$lt_var=\$$lt_var
++          $lt_var=C
++	  export $lt_var
++	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
++	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
++	fi"
++done
++LC_ALL=C
++LANGUAGE=C
++export LANGUAGE LC_ALL
++
++$lt_unset CDPATH
++
++
++# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
++# is ksh but when the shell is invoked as "sh" and the current value of
++# the _XPG environment variable is not equal to 1 (one), the special
++# positional parameter $0, within a function call, is the name of the
++# function.
++progpath="$0"
+ 
+-# Constants.
+-PROGRAM=ltmain.sh
+-PACKAGE=libtool
+-VERSION=1.4.2
+-TIMESTAMP=" (1.922.2.53 2001/09/11 03:18:52)"
+ 
+-default_mode=
+-help="Try \`$progname --help' for more information."
+-magic="%%%MAGIC variable%%%"
+-mkdir="mkdir"
+-mv="mv -f"
+-rm="rm -f"
+ 
+-# Sed substitution that helps us do robust quoting.  It backslashifies
+-# metacharacters that are still active within double-quoted strings.
+-Xsed='sed -e 1s/^X//'
+-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+-SP2NL='tr \040 \012'
+-NL2SP='tr \015\012 \040\040'
+-
+-# NLS nuisances.
+-# Only set LANG and LC_ALL to C if already set.
+-# These must not be set unconditionally because not all systems understand
+-# e.g. LANG=C (notably SCO).
+-# We save the old values to restore during execute mode.
+-if test "${LC_ALL+set}" = set; then
+-  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+-fi
+-if test "${LANG+set}" = set; then
+-  save_LANG="$LANG"; LANG=C; export LANG
+-fi
++: ${CP="cp -f"}
++test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
++: ${EGREP="/bin/grep -E"}
++: ${FGREP="/bin/grep -F"}
++: ${GREP="/bin/grep"}
++: ${LN_S="ln -s"}
++: ${MAKE="make"}
++: ${MKDIR="mkdir"}
++: ${MV="mv -f"}
++: ${RM="rm -f"}
++: ${SED="/bin/sed"}
++: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
++: ${Xsed="$SED -e 1s/^X//"}
++
++# Global variables:
++EXIT_SUCCESS=0
++EXIT_FAILURE=1
++EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
++EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+ 
+-# Make sure IFS has a sensible default
+-: ${IFS=" 	"}
++exit_status=$EXIT_SUCCESS
+ 
+-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+-  echo "$modename: not configured to build any kind of library" 1>&2
+-  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+-  exit 1
+-fi
++# Make sure IFS has a sensible default
++lt_nl='
++'
++IFS=" 	$lt_nl"
++
++dirname="s,/[^/]*$,,"
++basename="s,^.*/,,"
++
++# func_dirname file append nondir_replacement
++# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
++# otherwise set result to NONDIR_REPLACEMENT.
++func_dirname ()
++{
++    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
++    if test "X$func_dirname_result" = "X${1}"; then
++      func_dirname_result="${3}"
++    else
++      func_dirname_result="$func_dirname_result${2}"
++    fi
++} # func_dirname may be replaced by extended shell implementation
+ 
+-# Global variables.
+-mode=$default_mode
+-nonopt=
+-prev=
+-prevopt=
+-run=
+-show="$echo"
+-show_help=
+-execute_dlfiles=
+-lo2o="s/\\.lo\$/.${objext}/"
+-o2lo="s/\\.${objext}\$/.lo/"
+ 
+-# Parse our command line options once, thoroughly.
+-while test $# -gt 0
+-do
+-  arg="$1"
+-  shift
++# func_basename file
++func_basename ()
++{
++    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
++} # func_basename may be replaced by extended shell implementation
++
++
++# func_dirname_and_basename file append nondir_replacement
++# perform func_basename and func_dirname in a single function
++# call:
++#   dirname:  Compute the dirname of FILE.  If nonempty,
++#             add APPEND to the result, otherwise set result
++#             to NONDIR_REPLACEMENT.
++#             value returned in "$func_dirname_result"
++#   basename: Compute filename of FILE.
++#             value retuned in "$func_basename_result"
++# Implementation must be kept synchronized with func_dirname
++# and func_basename. For efficiency, we do not delegate to
++# those functions but instead duplicate the functionality here.
++func_dirname_and_basename ()
++{
++    # Extract subdirectory from the argument.
++    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
++    if test "X$func_dirname_result" = "X${1}"; then
++      func_dirname_result="${3}"
++    else
++      func_dirname_result="$func_dirname_result${2}"
++    fi
++    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
++} # func_dirname_and_basename may be replaced by extended shell implementation
+ 
+-  case $arg in
+-  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+-  *) optarg= ;;
+-  esac
+ 
+-  # If the previous option needs an argument, assign it.
+-  if test -n "$prev"; then
+-    case $prev in
+-    execute_dlfiles)
+-      execute_dlfiles="$execute_dlfiles $arg"
+-      ;;
+-    *)
+-      eval "$prev=\$arg"
+-      ;;
++# func_stripname prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++# func_strip_suffix prefix name
++func_stripname ()
++{
++    case ${2} in
++      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
++      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+     esac
++} # func_stripname may be replaced by extended shell implementation
+ 
+-    prev=
+-    prevopt=
+-    continue
+-  fi
+ 
+-  # Have we seen a non-optional argument yet?
+-  case $arg in
+-  --help)
+-    show_help=yes
++# These SED scripts presuppose an absolute path with a trailing slash.
++pathcar='s,^/\([^/]*\).*$,\1,'
++pathcdr='s,^/[^/]*,,'
++removedotparts=':dotsl
++		s@/\./@/@g
++		t dotsl
++		s,/\.$,/,'
++collapseslashes='s@/\{1,\}@/@g'
++finalslash='s,/*$,/,'
++
++# func_normal_abspath PATH
++# Remove doubled-up and trailing slashes, "." path components,
++# and cancel out any ".." path components in PATH after making
++# it an absolute path.
++#             value returned in "$func_normal_abspath_result"
++func_normal_abspath ()
++{
++  # Start from root dir and reassemble the path.
++  func_normal_abspath_result=
++  func_normal_abspath_tpath=$1
++  func_normal_abspath_altnamespace=
++  case $func_normal_abspath_tpath in
++    "")
++      # Empty path, that just means $cwd.
++      func_stripname '' '/' "`pwd`"
++      func_normal_abspath_result=$func_stripname_result
++      return
+     ;;
+-
+-  --version)
+-    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+-    exit 0
++    # The next three entries are used to spot a run of precisely
++    # two leading slashes without using negated character classes;
++    # we take advantage of case's first-match behaviour.
++    ///*)
++      # Unusual form of absolute path, do nothing.
+     ;;
+-
+-  --config)
+-    sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
+-    exit 0
++    //*)
++      # Not necessarily an ordinary path; POSIX reserves leading '//'
++      # and for example Cygwin uses it to access remote file shares
++      # over CIFS/SMB, so we conserve a leading double slash if found.
++      func_normal_abspath_altnamespace=/
+     ;;
+-
+-  --debug)
+-    echo "$progname: enabling shell trace mode"
+-    set -x
++    /*)
++      # Absolute path, do nothing.
+     ;;
+-
+-  --dry-run | -n)
+-    run=:
++    *)
++      # Relative path, prepend $cwd.
++      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+     ;;
+-
+-  --features)
+-    echo "host: $host"
+-    if test "$build_libtool_libs" = yes; then
+-      echo "enable shared libraries"
+-    else
+-      echo "disable shared libraries"
+-    fi
+-    if test "$build_old_libs" = yes; then
+-      echo "enable static libraries"
+-    else
+-      echo "disable static libraries"
++  esac
++  # Cancel out all the simple stuff to save iterations.  We also want
++  # the path to end with a slash for ease of parsing, so make sure
++  # there is one (and only one) here.
++  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
++        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
++  while :; do
++    # Processed it all yet?
++    if test "$func_normal_abspath_tpath" = / ; then
++      # If we ascended to the root using ".." the result may be empty now.
++      if test -z "$func_normal_abspath_result" ; then
++        func_normal_abspath_result=/
++      fi
++      break
+     fi
+-    exit 0
+-    ;;
++    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
++        -e "$pathcar"`
++    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
++        -e "$pathcdr"`
++    # Figure out what to do with it
++    case $func_normal_abspath_tcomponent in
++      "")
++        # Trailing empty path component, ignore it.
++      ;;
++      ..)
++        # Parent dir; strip last assembled component from result.
++        func_dirname "$func_normal_abspath_result"
++        func_normal_abspath_result=$func_dirname_result
++      ;;
++      *)
++        # Actual path component, append it.
++        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
++      ;;
++    esac
++  done
++  # Restore leading double-slash if one was found on entry.
++  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
++}
+ 
+-  --finish) mode="finish" ;;
++# func_relative_path SRCDIR DSTDIR
++# generates a relative path from SRCDIR to DSTDIR, with a trailing
++# slash if non-empty, suitable for immediately appending a filename
++# without needing to append a separator.
++#             value returned in "$func_relative_path_result"
++func_relative_path ()
++{
++  func_relative_path_result=
++  func_normal_abspath "$1"
++  func_relative_path_tlibdir=$func_normal_abspath_result
++  func_normal_abspath "$2"
++  func_relative_path_tbindir=$func_normal_abspath_result
++
++  # Ascend the tree starting from libdir
++  while :; do
++    # check if we have found a prefix of bindir
++    case $func_relative_path_tbindir in
++      $func_relative_path_tlibdir)
++        # found an exact match
++        func_relative_path_tcancelled=
++        break
++        ;;
++      $func_relative_path_tlibdir*)
++        # found a matching prefix
++        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
++        func_relative_path_tcancelled=$func_stripname_result
++        if test -z "$func_relative_path_result"; then
++          func_relative_path_result=.
++        fi
++        break
++        ;;
++      *)
++        func_dirname $func_relative_path_tlibdir
++        func_relative_path_tlibdir=${func_dirname_result}
++        if test "x$func_relative_path_tlibdir" = x ; then
++          # Have to descend all the way to the root!
++          func_relative_path_result=../$func_relative_path_result
++          func_relative_path_tcancelled=$func_relative_path_tbindir
++          break
++        fi
++        func_relative_path_result=../$func_relative_path_result
++        ;;
++    esac
++  done
+ 
+-  --mode) prevopt="--mode" prev=mode ;;
+-  --mode=*) mode="$optarg" ;;
++  # Now calculate path; take care to avoid doubling-up slashes.
++  func_stripname '' '/' "$func_relative_path_result"
++  func_relative_path_result=$func_stripname_result
++  func_stripname '/' '/' "$func_relative_path_tcancelled"
++  if test "x$func_stripname_result" != x ; then
++    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
++  fi
+ 
+-  --quiet | --silent)
+-    show=:
+-    ;;
++  # Normalisation. If bindir is libdir, return empty string,
++  # else relative path ending with a slash; either way, target
++  # file name can be directly appended.
++  if test ! -z "$func_relative_path_result"; then
++    func_stripname './' '' "$func_relative_path_result/"
++    func_relative_path_result=$func_stripname_result
++  fi
++}
+ 
+-  -dlopen)
+-    prevopt="-dlopen"
+-    prev=execute_dlfiles
+-    ;;
++# The name of this program:
++func_dirname_and_basename "$progpath"
++progname=$func_basename_result
++
++# Make sure we have an absolute path for reexecution:
++case $progpath in
++  [\\/]*|[A-Za-z]:\\*) ;;
++  *[\\/]*)
++     progdir=$func_dirname_result
++     progdir=`cd "$progdir" && pwd`
++     progpath="$progdir/$progname"
++     ;;
++  *)
++     save_IFS="$IFS"
++     IFS=:
++     for progdir in $PATH; do
++       IFS="$save_IFS"
++       test -x "$progdir/$progname" && break
++     done
++     IFS="$save_IFS"
++     test -n "$progdir" || progdir=`pwd`
++     progpath="$progdir/$progname"
++     ;;
++esac
+ 
+-  -*)
+-    $echo "$modename: unrecognized option \`$arg'" 1>&2
+-    $echo "$help" 1>&2
+-    exit 1
+-    ;;
++# Sed substitution that helps us do robust quoting.  It backslashifies
++# metacharacters that are still active within double-quoted strings.
++Xsed="${SED}"' -e 1s/^X//'
++sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+ 
+-  *)
+-    nonopt="$arg"
+-    break
+-    ;;
+-  esac
+-done
++# Same as above, but do not quote variable references.
++double_quote_subst='s/\(["`\\]\)/\\\1/g'
+ 
+-if test -n "$prevopt"; then
+-  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+-  $echo "$help" 1>&2
+-  exit 1
+-fi
++# Sed substitution that turns a string into a regex matching for the
++# string literally.
++sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
++
++# Sed substitution that converts a w32 file name or path
++# which contains forward slashes, into one that contains
++# (escaped) backslashes.  A very naive implementation.
++lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
++
++# Re-`\' parameter expansions in output of double_quote_subst that were
++# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
++# in input to double_quote_subst, that '$' was protected from expansion.
++# Since each input `\' is now two `\'s, look for any number of runs of
++# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
++bs='\\'
++bs2='\\\\'
++bs4='\\\\\\\\'
++dollar='\$'
++sed_double_backslash="\
++  s/$bs4/&\\
++/g
++  s/^$bs2$dollar/$bs&/
++  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
++  s/\n//g"
++
++# Standard options:
++opt_dry_run=false
++opt_help=false
++opt_quiet=false
++opt_verbose=false
++opt_warning=:
++
++# func_echo arg...
++# Echo program name prefixed message, along with the current mode
++# name if it has been set yet.
++func_echo ()
++{
++    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
++}
+ 
+-# If this variable is set in any of the actions, the command in it
+-# will be execed at the end.  This prevents here-documents from being
+-# left over by shells.
+-exec_cmd=
++# func_verbose arg...
++# Echo program name prefixed message in verbose mode only.
++func_verbose ()
++{
++    $opt_verbose && func_echo ${1+"$@"}
++
++    # A bug in bash halts the script if the last line of a function
++    # fails when set -e is in force, so we need another command to
++    # work around that:
++    :
++}
+ 
+-if test -z "$show_help"; then
++# func_echo_all arg...
++# Invoke $ECHO with all args, space-separated.
++func_echo_all ()
++{
++    $ECHO "$*"
++}
+ 
+-  # Infer the operation mode.
+-  if test -z "$mode"; then
+-    case $nonopt in
+-    *cc | *++ | gcc* | *-gcc*)
+-      mode=link
+-      for arg
+-      do
+-	case $arg in
+-	-c)
+-	   mode=compile
+-	   break
+-	   ;;
+-	esac
+-      done
+-      ;;
+-    *db | *dbx | *strace | *truss)
+-      mode=execute
+-      ;;
+-    *install*|cp|mv)
+-      mode=install
+-      ;;
+-    *rm)
+-      mode=uninstall
+-      ;;
+-    *)
+-      # If we have no mode, but dlfiles were specified, then do execute mode.
+-      test -n "$execute_dlfiles" && mode=execute
++# func_error arg...
++# Echo program name prefixed message to standard error.
++func_error ()
++{
++    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
++}
+ 
+-      # Just use the default operation mode.
+-      if test -z "$mode"; then
+-	if test -n "$nonopt"; then
+-	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+-	else
+-	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+-	fi
+-      fi
+-      ;;
+-    esac
+-  fi
++# func_warning arg...
++# Echo program name prefixed warning message to standard error.
++func_warning ()
++{
++    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+ 
+-  # Only execute mode is allowed to have -dlopen flags.
+-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+-    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+-    $echo "$help" 1>&2
+-    exit 1
+-  fi
++    # bash bug again:
++    :
++}
+ 
+-  # Change the help message to a mode-specific one.
+-  generic_help="$help"
+-  help="Try \`$modename --help --mode=$mode' for more information."
+-
+-  # These modes are in order of execution frequency so that they run quickly.
+-  case $mode in
+-  # libtool compile mode
+-  compile)
+-    modename="$modename: compile"
+-    # Get the compilation command and the source file.
+-    base_compile=
+-    prev=
+-    lastarg=
+-    srcfile="$nonopt"
+-    suppress_output=
++# func_fatal_error arg...
++# Echo program name prefixed message to standard error, and exit.
++func_fatal_error ()
++{
++    func_error ${1+"$@"}
++    exit $EXIT_FAILURE
++}
+ 
+-    user_target=no
+-    for arg
+-    do
+-      case $prev in
+-      "") ;;
+-      xcompiler)
+-	# Aesthetically quote the previous argument.
+-	prev=
+-	lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
++# func_fatal_help arg...
++# Echo program name prefixed message to standard error, followed by
++# a help hint, and exit.
++func_fatal_help ()
++{
++    func_error ${1+"$@"}
++    func_fatal_error "$help"
++}
++help="Try \`$progname --help' for more information."  ## default
+ 
+-	case $arg in
+-	# Double-quote args containing other shell metacharacters.
+-	# Many Bourne shells cannot handle close brackets correctly
+-	# in scan sets, so we specify it separately.
+-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	  arg="\"$arg\""
+-	  ;;
+-	esac
+ 
+-	# Add the previous argument to base_compile.
+-	if test -z "$base_compile"; then
+-	  base_compile="$lastarg"
+-	else
+-	  base_compile="$base_compile $lastarg"
+-	fi
+-	continue
+-	;;
++# func_grep expression filename
++# Check whether EXPRESSION matches any line of FILENAME, without output.
++func_grep ()
++{
++    $GREP "$1" "$2" >/dev/null 2>&1
++}
++
++
++# func_mkdir_p directory-path
++# Make sure the entire path to DIRECTORY-PATH is available.
++func_mkdir_p ()
++{
++    my_directory_path="$1"
++    my_dir_list=
++
++    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
++
++      # Protect directory names starting with `-'
++      case $my_directory_path in
++        -*) my_directory_path="./$my_directory_path" ;;
+       esac
+ 
+-      # Accept any command-line options.
+-      case $arg in
+-      -o)
+-	if test "$user_target" != "no"; then
+-	  $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+-	  exit 1
+-	fi
+-	user_target=next
+-	;;
++      # While some portion of DIR does not yet exist...
++      while test ! -d "$my_directory_path"; do
++        # ...make a list in topmost first order.  Use a colon delimited
++	# list incase some portion of path contains whitespace.
++        my_dir_list="$my_directory_path:$my_dir_list"
+ 
+-      -static)
+-	build_old_libs=yes
+-	continue
+-	;;
++        # If the last portion added has no slash in it, the list is done
++        case $my_directory_path in */*) ;; *) break ;; esac
+ 
+-      -prefer-pic)
+-	pic_mode=yes
+-	continue
+-	;;
++        # ...otherwise throw away the child directory and loop
++        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
++      done
++      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+ 
+-      -prefer-non-pic)
+-	pic_mode=no
+-	continue
+-	;;
++      save_mkdir_p_IFS="$IFS"; IFS=':'
++      for my_dir in $my_dir_list; do
++	IFS="$save_mkdir_p_IFS"
++        # mkdir can fail with a `File exist' error if two processes
++        # try to create one of the directories concurrently.  Don't
++        # stop in that case!
++        $MKDIR "$my_dir" 2>/dev/null || :
++      done
++      IFS="$save_mkdir_p_IFS"
+ 
+-      -Xcompiler)
+-	prev=xcompiler
+-	continue
+-	;;
++      # Bail out if we (or some other process) failed to create a directory.
++      test -d "$my_directory_path" || \
++        func_fatal_error "Failed to create \`$1'"
++    fi
++}
+ 
+-      -Wc,*)
+-	args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+-	lastarg=
+-	save_ifs="$IFS"; IFS=','
+-	for arg in $args; do
+-	  IFS="$save_ifs"
+ 
+-	  # Double-quote args containing other shell metacharacters.
+-	  # Many Bourne shells cannot handle close brackets correctly
+-	  # in scan sets, so we specify it separately.
+-	  case $arg in
+-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	    arg="\"$arg\""
+-	    ;;
+-	  esac
+-	  lastarg="$lastarg $arg"
+-	done
+-	IFS="$save_ifs"
+-	lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
++# func_mktempdir [string]
++# Make a temporary directory that won't clash with other running
++# libtool processes, and avoids race conditions if possible.  If
++# given, STRING is the basename for that directory.
++func_mktempdir ()
++{
++    my_template="${TMPDIR-/tmp}/${1-$progname}"
++
++    if test "$opt_dry_run" = ":"; then
++      # Return a directory name, but don't create it in dry-run mode
++      my_tmpdir="${my_template}-$$"
++    else
+ 
+-	# Add the arguments to base_compile.
+-	if test -z "$base_compile"; then
+-	  base_compile="$lastarg"
+-	else
+-	  base_compile="$base_compile $lastarg"
+-	fi
+-	continue
+-	;;
+-      esac
++      # If mktemp works, use that first and foremost
++      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+ 
+-      case $user_target in
+-      next)
+-	# The next one is the -o target name
+-	user_target=yes
+-	continue
+-	;;
+-      yes)
+-	# We got the output file
+-	user_target=set
+-	libobj="$arg"
+-	continue
+-	;;
+-      esac
++      if test ! -d "$my_tmpdir"; then
++        # Failing that, at least try and use $RANDOM to avoid a race
++        my_tmpdir="${my_template}-${RANDOM-0}$$"
++
++        save_mktempdir_umask=`umask`
++        umask 0077
++        $MKDIR "$my_tmpdir"
++        umask $save_mktempdir_umask
++      fi
++
++      # If we're not in dry-run mode, bomb out on failure
++      test -d "$my_tmpdir" || \
++        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
++    fi
+ 
+-      # Accept the current argument as the source file.
+-      lastarg="$srcfile"
+-      srcfile="$arg"
++    $ECHO "$my_tmpdir"
++}
+ 
+-      # Aesthetically quote the previous argument.
+ 
+-      # Backslashify any backslashes, double quotes, and dollar signs.
+-      # These are the only characters that are still specially
+-      # interpreted inside of double-quoted scrings.
+-      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
++# func_quote_for_eval arg
++# Aesthetically quote ARG to be evaled later.
++# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
++# is double-quoted, suitable for a subsequent eval, whereas
++# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
++# which are still active within double quotes backslashified.
++func_quote_for_eval ()
++{
++    case $1 in
++      *[\\\`\"\$]*)
++	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
++      *)
++        func_quote_for_eval_unquoted_result="$1" ;;
++    esac
+ 
+-      # Double-quote args containing other shell metacharacters.
++    case $func_quote_for_eval_unquoted_result in
++      # Double-quote args containing shell metacharacters to delay
++      # word splitting, command substitution and and variable
++      # expansion for a subsequent eval.
+       # Many Bourne shells cannot handle close brackets correctly
+       # in scan sets, so we specify it separately.
+-      case $lastarg in
+       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	lastarg="\"$lastarg\""
+-	;;
+-      esac
++        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
++        ;;
++      *)
++        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
++    esac
++}
+ 
+-      # Add the previous argument to base_compile.
+-      if test -z "$base_compile"; then
+-	base_compile="$lastarg"
+-      else
+-	base_compile="$base_compile $lastarg"
+-      fi
+-    done
+ 
+-    case $user_target in
+-    set)
+-      ;;
+-    no)
+-      # Get the name of the library object.
+-      libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+-      ;;
+-    *)
+-      $echo "$modename: you must specify a target with \`-o'" 1>&2
+-      exit 1
+-      ;;
++# func_quote_for_expand arg
++# Aesthetically quote ARG to be evaled later; same as above,
++# but do not quote variable references.
++func_quote_for_expand ()
++{
++    case $1 in
++      *[\\\`\"]*)
++	my_arg=`$ECHO "$1" | $SED \
++	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
++      *)
++        my_arg="$1" ;;
+     esac
+ 
+-    # Recognize several different file suffixes.
+-    # If the user specifies -o file.o, it is replaced with file.lo
+-    xform='[cCFSfmso]'
+-    case $libobj in
+-    *.ada) xform=ada ;;
+-    *.adb) xform=adb ;;
+-    *.ads) xform=ads ;;
+-    *.asm) xform=asm ;;
+-    *.c++) xform=c++ ;;
+-    *.cc) xform=cc ;;
+-    *.cpp) xform=cpp ;;
+-    *.cxx) xform=cxx ;;
+-    *.f90) xform=f90 ;;
+-    *.for) xform=for ;;
++    case $my_arg in
++      # Double-quote args containing shell metacharacters to delay
++      # word splitting and command substitution for a subsequent eval.
++      # Many Bourne shells cannot handle close brackets correctly
++      # in scan sets, so we specify it separately.
++      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
++        my_arg="\"$my_arg\""
++        ;;
+     esac
+ 
+-    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
++    func_quote_for_expand_result="$my_arg"
++}
+ 
+-    case $libobj in
+-    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+-    *)
+-      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+-      exit 1
+-      ;;
+-    esac
+ 
+-    if test -z "$base_compile"; then
+-      $echo "$modename: you must specify a compilation command" 1>&2
+-      $echo "$help" 1>&2
+-      exit 1
++# func_show_eval cmd [fail_exp]
++# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
++# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
++# is given, then evaluate it.
++func_show_eval ()
++{
++    my_cmd="$1"
++    my_fail_exp="${2-:}"
++
++    ${opt_silent-false} || {
++      func_quote_for_expand "$my_cmd"
++      eval "func_echo $func_quote_for_expand_result"
++    }
++
++    if ${opt_dry_run-false}; then :; else
++      eval "$my_cmd"
++      my_status=$?
++      if test "$my_status" -eq 0; then :; else
++	eval "(exit $my_status); $my_fail_exp"
++      fi
+     fi
++}
+ 
+-    # Delete any leftover library objects.
+-    if test "$build_old_libs" = yes; then
+-      removelist="$obj $libobj"
+-    else
+-      removelist="$libobj"
++
++# func_show_eval_locale cmd [fail_exp]
++# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
++# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
++# is given, then evaluate it.  Use the saved locale for evaluation.
++func_show_eval_locale ()
++{
++    my_cmd="$1"
++    my_fail_exp="${2-:}"
++
++    ${opt_silent-false} || {
++      func_quote_for_expand "$my_cmd"
++      eval "func_echo $func_quote_for_expand_result"
++    }
++
++    if ${opt_dry_run-false}; then :; else
++      eval "$lt_user_locale
++	    $my_cmd"
++      my_status=$?
++      eval "$lt_safe_locale"
++      if test "$my_status" -eq 0; then :; else
++	eval "(exit $my_status); $my_fail_exp"
++      fi
+     fi
++}
+ 
+-    $run $rm $removelist
+-    trap "$run $rm $removelist; exit 1" 1 2 15
++# func_tr_sh
++# Turn $1 into a string suitable for a shell variable name.
++# Result is stored in $func_tr_sh_result.  All characters
++# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
++# if $1 begins with a digit, a '_' is prepended as well.
++func_tr_sh ()
++{
++  case $1 in
++  [0-9]* | *[!a-zA-Z0-9_]*)
++    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
++    ;;
++  * )
++    func_tr_sh_result=$1
++    ;;
++  esac
++}
+ 
+-    # On Cygwin there's no "real" PIC flag so we must build both object types
+-    case $host_os in
+-    cygwin* | mingw* | pw32* | os2*)
+-      pic_mode=default
+-      ;;
+-    esac
+-    if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then
+-      # non-PIC code in shared libraries is not supported
+-      pic_mode=default
+-    fi
+ 
+-    # Calculate the filename of the output object if compiler does
+-    # not support -o with -c
+-    if test "$compiler_c_o" = no; then
+-      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+-      lockfile="$output_obj.lock"
+-      removelist="$removelist $output_obj $lockfile"
+-      trap "$run $rm $removelist; exit 1" 1 2 15
+-    else
+-      need_locks=no
+-      lockfile=
+-    fi
++# func_version
++# Echo version message to standard output and exit.
++func_version ()
++{
++    $opt_debug
++
++    $SED -n '/(C)/!b go
++	:more
++	/\./!{
++	  N
++	  s/\n# / /
++	  b more
++	}
++	:go
++	/^# '$PROGRAM' (GNU /,/# warranty; / {
++        s/^# //
++	s/^# *$//
++        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
++        p
++     }' < "$progpath"
++     exit $?
++}
+ 
+-    # Lock this critical section if it is needed
+-    # We use this script file to make the link, it avoids creating a new file
+-    if test "$need_locks" = yes; then
+-      until $run ln "$0" "$lockfile" 2>/dev/null; do
+-	$show "Waiting for $lockfile to be removed"
+-	sleep 2
+-      done
+-    elif test "$need_locks" = warn; then
+-      if test -f "$lockfile"; then
+-	echo "\
+-*** ERROR, $lockfile exists and contains:
+-`cat $lockfile 2>/dev/null`
++# func_usage
++# Echo short help message to standard output and exit.
++func_usage ()
++{
++    $opt_debug
++
++    $SED -n '/^# Usage:/,/^#  *.*--help/ {
++        s/^# //
++	s/^# *$//
++	s/\$progname/'$progname'/
++	p
++    }' < "$progpath"
++    echo
++    $ECHO "run \`$progname --help | more' for full usage"
++    exit $?
++}
+ 
+-This indicates that another process is trying to use the same
+-temporary object file, and libtool could not work around it because
+-your compiler does not support \`-c' and \`-o' together.  If you
+-repeat this compilation, it may succeed, by chance, but you had better
+-avoid parallel builds (make -j) in this platform, or get a better
+-compiler."
+-
+-	$run $rm $removelist
+-	exit 1
+-      fi
+-      echo $srcfile > "$lockfile"
++# func_help [NOEXIT]
++# Echo long help message to standard output and exit,
++# unless 'noexit' is passed as argument.
++func_help ()
++{
++    $opt_debug
++
++    $SED -n '/^# Usage:/,/# Report bugs to/ {
++	:print
++        s/^# //
++	s/^# *$//
++	s*\$progname*'$progname'*
++	s*\$host*'"$host"'*
++	s*\$SHELL*'"$SHELL"'*
++	s*\$LTCC*'"$LTCC"'*
++	s*\$LTCFLAGS*'"$LTCFLAGS"'*
++	s*\$LD*'"$LD"'*
++	s/\$with_gnu_ld/'"$with_gnu_ld"'/
++	s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
++	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
++	p
++	d
++     }
++     /^# .* home page:/b print
++     /^# General help using/b print
++     ' < "$progpath"
++    ret=$?
++    if test -z "$1"; then
++      exit $ret
+     fi
++}
+ 
+-    if test -n "$fix_srcfile_path"; then
+-      eval srcfile=\"$fix_srcfile_path\"
+-    fi
++# func_missing_arg argname
++# Echo program name prefixed message to standard error and set global
++# exit_cmd.
++func_missing_arg ()
++{
++    $opt_debug
+ 
+-    # Only build a PIC object if we are building libtool libraries.
+-    if test "$build_libtool_libs" = yes; then
+-      # Without this assignment, base_compile gets emptied.
+-      fbsd_hideous_sh_bug=$base_compile
++    func_error "missing argument for $1."
++    exit_cmd=exit
++}
+ 
+-      if test "$pic_mode" != no; then
+-	# All platforms use -DPIC, to notify preprocessed assembler code.
+-	command="$base_compile $srcfile $pic_flag -DPIC"
+-      else
+-	# Don't build PIC code
+-	command="$base_compile $srcfile"
+-      fi
+-      if test "$build_old_libs" = yes; then
+-	lo_libobj="$libobj"
+-	dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+-	if test "X$dir" = "X$libobj"; then
+-	  dir="$objdir"
+-	else
+-	  dir="$dir/$objdir"
+-	fi
+-	libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+ 
+-	if test -d "$dir"; then
+-	  $show "$rm $libobj"
+-	  $run $rm $libobj
+-	else
+-	  $show "$mkdir $dir"
+-	  $run $mkdir $dir
+-	  status=$?
+-	  if test $status -ne 0 && test ! -d $dir; then
+-	    exit $status
+-	  fi
+-	fi
+-      fi
+-      if test "$compiler_o_lo" = yes; then
+-	output_obj="$libobj"
+-	command="$command -o $output_obj"
+-      elif test "$compiler_c_o" = yes; then
+-	output_obj="$obj"
+-	command="$command -o $output_obj"
+-      fi
++# func_split_short_opt shortopt
++# Set func_split_short_opt_name and func_split_short_opt_arg shell
++# variables after splitting SHORTOPT after the 2nd character.
++func_split_short_opt ()
++{
++    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
++    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
++
++    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
++    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
++} # func_split_short_opt may be replaced by extended shell implementation
++
++
++# func_split_long_opt longopt
++# Set func_split_long_opt_name and func_split_long_opt_arg shell
++# variables after splitting LONGOPT at the `=' sign.
++func_split_long_opt ()
++{
++    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
++    my_sed_long_arg='1s/^--[^=]*=//'
++
++    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
++    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
++} # func_split_long_opt may be replaced by extended shell implementation
+ 
+-      $run $rm "$output_obj"
+-      $show "$command"
+-      if $run eval "$command"; then :
+-      else
+-	test -n "$output_obj" && $run $rm $removelist
+-	exit 1
+-      fi
++exit_cmd=:
+ 
+-      if test "$need_locks" = warn &&
+-	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+-	echo "\
+-*** ERROR, $lockfile contains:
+-`cat $lockfile 2>/dev/null`
+ 
+-but it should contain:
+-$srcfile
+ 
+-This indicates that another process is trying to use the same
+-temporary object file, and libtool could not work around it because
+-your compiler does not support \`-c' and \`-o' together.  If you
+-repeat this compilation, it may succeed, by chance, but you had better
+-avoid parallel builds (make -j) in this platform, or get a better
+-compiler."
+ 
+-	$run $rm $removelist
+-	exit 1
+-      fi
+ 
+-      # Just move the object if needed, then go on to compile the next one
+-      if test x"$output_obj" != x"$libobj"; then
+-	$show "$mv $output_obj $libobj"
+-	if $run $mv $output_obj $libobj; then :
+-	else
+-	  error=$?
+-	  $run $rm $removelist
+-	  exit $error
+-	fi
+-      fi
++magic="%%%MAGIC variable%%%"
++magic_exe="%%%MAGIC EXE variable%%%"
+ 
+-      # If we have no pic_flag, then copy the object into place and finish.
+-      if (test -z "$pic_flag" || test "$pic_mode" != default) &&
+-	 test "$build_old_libs" = yes; then
+-	# Rename the .lo from within objdir to obj
+-	if test -f $obj; then
+-	  $show $rm $obj
+-	  $run $rm $obj
+-	fi
++# Global variables.
++nonopt=
++preserve_args=
++lo2o="s/\\.lo\$/.${objext}/"
++o2lo="s/\\.${objext}\$/.lo/"
++extracted_archives=
++extracted_serial=0
+ 
+-	$show "$mv $libobj $obj"
+-	if $run $mv $libobj $obj; then :
+-	else
+-	  error=$?
+-	  $run $rm $removelist
+-	  exit $error
+-	fi
++# If this variable is set in any of the actions, the command in it
++# will be execed at the end.  This prevents here-documents from being
++# left over by shells.
++exec_cmd=
+ 
+-	xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+-	if test "X$xdir" = "X$obj"; then
+-	  xdir="."
+-	else
+-	  xdir="$xdir"
+-	fi
+-	baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
+-	libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+-	# Now arrange that obj and lo_libobj become the same file
+-	$show "(cd $xdir && $LN_S $baseobj $libobj)"
+-	if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
+-	  # Unlock the critical section if it was locked
+-	  if test "$need_locks" != no; then
+-	    $run $rm "$lockfile"
+-	  fi
+-	  exit 0
+-	else
+-	  error=$?
+-	  $run $rm $removelist
+-	  exit $error
+-	fi
+-      fi
++# func_append var value
++# Append VALUE to the end of shell variable VAR.
++func_append ()
++{
++    eval "${1}=\$${1}\${2}"
++} # func_append may be replaced by extended shell implementation
++
++# func_append_quoted var value
++# Quote VALUE and append to the end of shell variable VAR, separated
++# by a space.
++func_append_quoted ()
++{
++    func_quote_for_eval "${2}"
++    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
++} # func_append_quoted may be replaced by extended shell implementation
++
++
++# func_arith arithmetic-term...
++func_arith ()
++{
++    func_arith_result=`expr "${@}"`
++} # func_arith may be replaced by extended shell implementation
++
++
++# func_len string
++# STRING may not start with a hyphen.
++func_len ()
++{
++    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
++} # func_len may be replaced by extended shell implementation
++
++
++# func_lo2o object
++func_lo2o ()
++{
++    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
++} # func_lo2o may be replaced by extended shell implementation
++
++
++# func_xform libobj-or-source
++func_xform ()
++{
++    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
++} # func_xform may be replaced by extended shell implementation
++
++
++# func_fatal_configuration arg...
++# Echo program name prefixed message to standard error, followed by
++# a configuration failure hint, and exit.
++func_fatal_configuration ()
++{
++    func_error ${1+"$@"}
++    func_error "See the $PACKAGE documentation for more information."
++    func_fatal_error "Fatal configuration error."
++}
+ 
+-      # Allow error messages only from the first compilation.
+-      suppress_output=' >/dev/null 2>&1'
+-    fi
+ 
+-    # Only build a position-dependent object if we build old libraries.
++# func_config
++# Display the configuration for all the tags in this script.
++func_config ()
++{
++    re_begincf='^# ### BEGIN LIBTOOL'
++    re_endcf='^# ### END LIBTOOL'
++
++    # Default configuration.
++    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
++
++    # Now print the configurations for the tags.
++    for tagname in $taglist; do
++      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
++    done
++
++    exit $?
++}
++
++# func_features
++# Display the features supported by this script.
++func_features ()
++{
++    echo "host: $host"
++    if test "$build_libtool_libs" = yes; then
++      echo "enable shared libraries"
++    else
++      echo "disable shared libraries"
++    fi
+     if test "$build_old_libs" = yes; then
+-      if test "$pic_mode" != yes; then
+-	# Don't build PIC code
+-	command="$base_compile $srcfile"
++      echo "enable static libraries"
++    else
++      echo "disable static libraries"
++    fi
++
++    exit $?
++}
++
++# func_enable_tag tagname
++# Verify that TAGNAME is valid, and either flag an error and exit, or
++# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
++# variable here.
++func_enable_tag ()
++{
++  # Global variable:
++  tagname="$1"
++
++  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
++  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
++  sed_extractcf="/$re_begincf/,/$re_endcf/p"
++
++  # Validate tagname.
++  case $tagname in
++    *[!-_A-Za-z0-9,/]*)
++      func_fatal_error "invalid tag name: $tagname"
++      ;;
++  esac
++
++  # Don't test for the "default" C tag, as we know it's
++  # there but not specially marked.
++  case $tagname in
++    CC) ;;
++    *)
++      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
++	taglist="$taglist $tagname"
++
++	# Evaluate the configuration.  Be careful to quote the path
++	# and the sed script, to avoid splitting on whitespace, but
++	# also don't use non-portable quotes within backquotes within
++	# quotes we have to do it in 2 steps:
++	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
++	eval "$extractedcf"
+       else
+-	# All platforms use -DPIC, to notify preprocessed assembler code.
+-	command="$base_compile $srcfile $pic_flag -DPIC"
+-      fi
+-      if test "$compiler_c_o" = yes; then
+-	command="$command -o $obj"
+-	output_obj="$obj"
++	func_error "ignoring unknown tag $tagname"
+       fi
++      ;;
++  esac
++}
+ 
+-      # Suppress compiler output if we already did a PIC compilation.
+-      command="$command$suppress_output"
+-      $run $rm "$output_obj"
+-      $show "$command"
+-      if $run eval "$command"; then :
++# func_check_version_match
++# Ensure that we are using m4 macros, and libtool script from the same
++# release of libtool.
++func_check_version_match ()
++{
++  if test "$package_revision" != "$macro_revision"; then
++    if test "$VERSION" != "$macro_version"; then
++      if test -z "$macro_version"; then
++        cat >&2 <<_LT_EOF
++$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
++$progname: definition of this LT_INIT comes from an older release.
++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
++$progname: and run autoconf again.
++_LT_EOF
+       else
+-	$run $rm $removelist
+-	exit 1
++        cat >&2 <<_LT_EOF
++$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
++$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
++$progname: and run autoconf again.
++_LT_EOF
+       fi
++    else
++      cat >&2 <<_LT_EOF
++$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
++$progname: but the definition of this LT_INIT comes from revision $macro_revision.
++$progname: You should recreate aclocal.m4 with macros from revision $package_revision
++$progname: of $PACKAGE $VERSION and run autoconf again.
++_LT_EOF
++    fi
+ 
+-      if test "$need_locks" = warn &&
+-	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+-	echo "\
+-*** ERROR, $lockfile contains:
+-`cat $lockfile 2>/dev/null`
++    exit $EXIT_MISMATCH
++  fi
++}
+ 
+-but it should contain:
+-$srcfile
+ 
+-This indicates that another process is trying to use the same
+-temporary object file, and libtool could not work around it because
+-your compiler does not support \`-c' and \`-o' together.  If you
+-repeat this compilation, it may succeed, by chance, but you had better
+-avoid parallel builds (make -j) in this platform, or get a better
+-compiler."
++# Shorthand for --mode=foo, only valid as the first argument
++case $1 in
++clean|clea|cle|cl)
++  shift; set dummy --mode clean ${1+"$@"}; shift
++  ;;
++compile|compil|compi|comp|com|co|c)
++  shift; set dummy --mode compile ${1+"$@"}; shift
++  ;;
++execute|execut|execu|exec|exe|ex|e)
++  shift; set dummy --mode execute ${1+"$@"}; shift
++  ;;
++finish|finis|fini|fin|fi|f)
++  shift; set dummy --mode finish ${1+"$@"}; shift
++  ;;
++install|instal|insta|inst|ins|in|i)
++  shift; set dummy --mode install ${1+"$@"}; shift
++  ;;
++link|lin|li|l)
++  shift; set dummy --mode link ${1+"$@"}; shift
++  ;;
++uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
++  shift; set dummy --mode uninstall ${1+"$@"}; shift
++  ;;
++esac
+ 
+-	$run $rm $removelist
+-	exit 1
+-      fi
+ 
+-      # Just move the object if needed
+-      if test x"$output_obj" != x"$obj"; then
+-	$show "$mv $output_obj $obj"
+-	if $run $mv $output_obj $obj; then :
+-	else
+-	  error=$?
+-	  $run $rm $removelist
+-	  exit $error
+-	fi
+-      fi
+ 
+-      # Create an invalid libtool object if no PIC, so that we do not
+-      # accidentally link it into a program.
+-      if test "$build_libtool_libs" != yes; then
+-	$show "echo timestamp > $libobj"
+-	$run eval "echo timestamp > \$libobj" || exit $?
+-      else
+-	# Move the .lo from within objdir
+-	$show "$mv $libobj $lo_libobj"
+-	if $run $mv $libobj $lo_libobj; then :
+-	else
+-	  error=$?
+-	  $run $rm $removelist
+-	  exit $error
+-	fi
+-      fi
+-    fi
++# Option defaults:
++opt_debug=:
++opt_dry_run=false
++opt_config=false
++opt_preserve_dup_deps=false
++opt_features=false
++opt_finish=false
++opt_help=false
++opt_help_all=false
++opt_silent=:
++opt_verbose=:
++opt_silent=false
++opt_verbose=false
++
++
++# Parse options once, thoroughly.  This comes as soon as possible in the
++# script to make things like `--version' happen as quickly as we can.
++{
++  # this just eases exit handling
++  while test $# -gt 0; do
++    opt="$1"
++    shift
++    case $opt in
++      --debug|-x)	opt_debug='set -x'
++			func_echo "enabling shell trace mode"
++			$opt_debug
++			;;
++      --dry-run|--dryrun|-n)
++			opt_dry_run=:
++			;;
++      --config)
++			opt_config=:
++func_config
++			;;
++      --dlopen|-dlopen)
++			optarg="$1"
++			opt_dlopen="${opt_dlopen+$opt_dlopen
++}$optarg"
++			shift
++			;;
++      --preserve-dup-deps)
++			opt_preserve_dup_deps=:
++			;;
++      --features)
++			opt_features=:
++func_features
++			;;
++      --finish)
++			opt_finish=:
++set dummy --mode finish ${1+"$@"}; shift
++			;;
++      --help)
++			opt_help=:
++			;;
++      --help-all)
++			opt_help_all=:
++opt_help=': help-all'
++			;;
++      --mode)
++			test $# = 0 && func_missing_arg $opt && break
++			optarg="$1"
++			opt_mode="$optarg"
++case $optarg in
++  # Valid mode arguments:
++  clean|compile|execute|finish|install|link|relink|uninstall) ;;
++
++  # Catch anything else as an error
++  *) func_error "invalid argument for $opt"
++     exit_cmd=exit
++     break
++     ;;
++esac
++			shift
++			;;
++      --no-silent|--no-quiet)
++			opt_silent=false
++func_append preserve_args " $opt"
++			;;
++      --no-verbose)
++			opt_verbose=false
++func_append preserve_args " $opt"
++			;;
++      --silent|--quiet)
++			opt_silent=:
++func_append preserve_args " $opt"
++        opt_verbose=false
++			;;
++      --verbose|-v)
++			opt_verbose=:
++func_append preserve_args " $opt"
++opt_silent=false
++			;;
++      --tag)
++			test $# = 0 && func_missing_arg $opt && break
++			optarg="$1"
++			opt_tag="$optarg"
++func_append preserve_args " $opt $optarg"
++func_enable_tag "$optarg"
++			shift
++			;;
++
++      -\?|-h)		func_usage				;;
++      --help)		func_help				;;
++      --version)	func_version				;;
++
++      # Separate optargs to long options:
++      --*=*)
++			func_split_long_opt "$opt"
++			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
++			shift
++			;;
++
++      # Separate non-argument short options:
++      -\?*|-h*|-n*|-v*)
++			func_split_short_opt "$opt"
++			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
++			shift
++			;;
++
++      --)		break					;;
++      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
++      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
++    esac
++  done
+ 
+-    # Unlock the critical section if it was locked
+-    if test "$need_locks" != no; then
+-      $run $rm "$lockfile"
+-    fi
++  # Validate options:
+ 
+-    exit 0
+-    ;;
++  # save first non-option argument
++  if test "$#" -gt 0; then
++    nonopt="$opt"
++    shift
++  fi
+ 
+-  # libtool link mode
+-  link | relink)
+-    modename="$modename: link"
+-    case $host in
+-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+-      # It is impossible to link a dll without this setting, and
+-      # we shouldn't force the makefile maintainer to figure out
+-      # which system we are compiling for in order to pass an extra
+-      # flag for every libtool invokation.
+-      # allow_undefined=no
++  # preserve --debug
++  test "$opt_debug" = : || func_append preserve_args " --debug"
+ 
+-      # FIXME: Unfortunately, there are problems with the above when trying
+-      # to make a dll which has undefined symbols, in which case not
+-      # even a static library is built.  For now, we need to specify
+-      # -no-undefined on the libtool link line when we can be certain
+-      # that all symbols are satisfied, otherwise we get a static library.
+-      allow_undefined=yes
++  case $host in
++    *cygwin* | *mingw* | *pw32* | *cegcc*)
++      # don't eliminate duplications in $postdeps and $predeps
++      opt_duplicate_compiler_generated_deps=:
+       ;;
+     *)
+-      allow_undefined=yes
++      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+       ;;
++  esac
++
++  $opt_help || {
++    # Sanity checks first:
++    func_check_version_match
++
++    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
++      func_fatal_configuration "not configured to build any kind of library"
++    fi
++
++    # Darwin sucks
++    eval std_shrext=\"$shrext_cmds\"
++
++    # Only execute mode is allowed to have -dlopen flags.
++    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
++      func_error "unrecognized option \`-dlopen'"
++      $ECHO "$help" 1>&2
++      exit $EXIT_FAILURE
++    fi
++
++    # Change the help message to a mode-specific one.
++    generic_help="$help"
++    help="Try \`$progname --help --mode=$opt_mode' for more information."
++  }
++
++
++  # Bail if the options were screwed
++  $exit_cmd $EXIT_FAILURE
++}
++
++
++
++
++## ----------- ##
++##    Main.    ##
++## ----------- ##
++
++# func_lalib_p file
++# True iff FILE is a libtool `.la' library or `.lo' object file.
++# This function is only a basic sanity check; it will hardly flush out
++# determined imposters.
++func_lalib_p ()
++{
++    test -f "$1" &&
++      $SED -e 4q "$1" 2>/dev/null \
++        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
++}
++
++# func_lalib_unsafe_p file
++# True iff FILE is a libtool `.la' library or `.lo' object file.
++# This function implements the same check as func_lalib_p without
++# resorting to external programs.  To this end, it redirects stdin and
++# closes it afterwards, without saving the original file descriptor.
++# As a safety measure, use it only where a negative result would be
++# fatal anyway.  Works if `file' does not exist.
++func_lalib_unsafe_p ()
++{
++    lalib_p=no
++    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
++	for lalib_p_l in 1 2 3 4
++	do
++	    read lalib_p_line
++	    case "$lalib_p_line" in
++		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
++	    esac
++	done
++	exec 0<&5 5<&-
++    fi
++    test "$lalib_p" = yes
++}
++
++# func_ltwrapper_script_p file
++# True iff FILE is a libtool wrapper script
++# This function is only a basic sanity check; it will hardly flush out
++# determined imposters.
++func_ltwrapper_script_p ()
++{
++    func_lalib_p "$1"
++}
++
++# func_ltwrapper_executable_p file
++# True iff FILE is a libtool wrapper executable
++# This function is only a basic sanity check; it will hardly flush out
++# determined imposters.
++func_ltwrapper_executable_p ()
++{
++    func_ltwrapper_exec_suffix=
++    case $1 in
++    *.exe) ;;
++    *) func_ltwrapper_exec_suffix=.exe ;;
+     esac
+-    libtool_args="$nonopt"
+-    compile_command="$nonopt"
+-    finalize_command="$nonopt"
++    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
++}
+ 
+-    compile_rpath=
+-    finalize_rpath=
+-    compile_shlibpath=
+-    finalize_shlibpath=
+-    convenience=
+-    old_convenience=
+-    deplibs=
+-    old_deplibs=
+-    compiler_flags=
+-    linker_flags=
+-    dllsearchpath=
+-    lib_search_path=`pwd`
++# func_ltwrapper_scriptname file
++# Assumes file is an ltwrapper_executable
++# uses $file to determine the appropriate filename for a
++# temporary ltwrapper_script.
++func_ltwrapper_scriptname ()
++{
++    func_dirname_and_basename "$1" "" "."
++    func_stripname '' '.exe' "$func_basename_result"
++    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
++}
+ 
+-    avoid_version=no
+-    dlfiles=
+-    dlprefiles=
+-    dlself=no
+-    export_dynamic=no
+-    export_symbols=
+-    export_symbols_regex=
+-    generated=
+-    libobjs=
+-    ltlibs=
+-    module=no
+-    no_install=no
+-    objs=
+-    prefer_static_libs=no
+-    preload=no
+-    prev=
+-    prevarg=
+-    release=
+-    rpath=
+-    xrpath=
+-    perm_rpath=
+-    temp_rpath=
+-    thread_safe=no
+-    vinfo=
++# func_ltwrapper_p file
++# True iff FILE is a libtool wrapper script or wrapper executable
++# This function is only a basic sanity check; it will hardly flush out
++# determined imposters.
++func_ltwrapper_p ()
++{
++    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
++}
+ 
+-    # We need to know -static, to get the right output filenames.
+-    for arg
+-    do
+-      case $arg in
+-      -all-static | -static)
+-	if test "X$arg" = "X-all-static"; then
+-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+-	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+-	  fi
+-	  if test -n "$link_static_flag"; then
+-	    dlopen_self=$dlopen_self_static
+-	  fi
+-	else
+-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+-	    dlopen_self=$dlopen_self_static
+-	  fi
+-	fi
+-	build_libtool_libs=no
+-	build_old_libs=yes
+-	prefer_static_libs=yes
+-	break
+-	;;
+-      esac
++
++# func_execute_cmds commands fail_cmd
++# Execute tilde-delimited COMMANDS.
++# If FAIL_CMD is given, eval that upon failure.
++# FAIL_CMD may read-access the current command in variable CMD!
++func_execute_cmds ()
++{
++    $opt_debug
++    save_ifs=$IFS; IFS='~'
++    for cmd in $1; do
++      IFS=$save_ifs
++      eval cmd=\"$cmd\"
++      func_show_eval "$cmd" "${2-:}"
+     done
++    IFS=$save_ifs
++}
+ 
+-    # See if our shared archives depend on static archives.
+-    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+ 
+-    # Go through the arguments, transforming them on the way.
+-    while test $# -gt 0; do
+-      arg="$1"
+-      shift
+-      case $arg in
+-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+-	;;
+-      *) qarg=$arg ;;
+-      esac
+-      libtool_args="$libtool_args $qarg"
++# func_source file
++# Source FILE, adding directory component if necessary.
++# Note that it is not necessary on cygwin/mingw to append a dot to
++# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
++# behavior happens only for exec(3), not for open(2)!  Also, sourcing
++# `FILE.' does not work on cygwin managed mounts.
++func_source ()
++{
++    $opt_debug
++    case $1 in
++    */* | *\\*)	. "$1" ;;
++    *)		. "./$1" ;;
++    esac
++}
+ 
+-      # If the previous option needs an argument, assign it.
+-      if test -n "$prev"; then
+-	case $prev in
+-	output)
+-	  compile_command="$compile_command @OUTPUT@"
+-	  finalize_command="$finalize_command @OUTPUT@"
+-	  ;;
+-	esac
+ 
+-	case $prev in
+-	dlfiles|dlprefiles)
+-	  if test "$preload" = no; then
+-	    # Add the symbol object into the linking commands.
+-	    compile_command="$compile_command @SYMFILE@"
+-	    finalize_command="$finalize_command @SYMFILE@"
+-	    preload=yes
+-	  fi
+-	  case $arg in
+-	  *.la | *.lo) ;;  # We handle these cases below.
+-	  force)
+-	    if test "$dlself" = no; then
+-	      dlself=needless
+-	      export_dynamic=yes
+-	    fi
+-	    prev=
+-	    continue
+-	    ;;
+-	  self)
+-	    if test "$prev" = dlprefiles; then
+-	      dlself=yes
+-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+-	      dlself=yes
+-	    else
+-	      dlself=needless
+-	      export_dynamic=yes
+-	    fi
+-	    prev=
+-	    continue
+-	    ;;
+-	  *)
+-	    if test "$prev" = dlfiles; then
+-	      dlfiles="$dlfiles $arg"
+-	    else
+-	      dlprefiles="$dlprefiles $arg"
+-	    fi
+-	    prev=
+-	    continue
+-	    ;;
+-	  esac
+-	  ;;
+-	expsyms)
+-	  export_symbols="$arg"
+-	  if test ! -f "$arg"; then
+-	    $echo "$modename: symbol file \`$arg' does not exist"
+-	    exit 1
+-	  fi
+-	  prev=
+-	  continue
+-	  ;;
+-	expsyms_regex)
+-	  export_symbols_regex="$arg"
+-	  prev=
+-	  continue
+-	  ;;
+-	release)
+-	  release="-$arg"
+-	  prev=
+-	  continue
+-	  ;;
+-	rpath | xrpath)
+-	  # We need an absolute path.
+-	  case $arg in
+-	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+-	  *)
+-	    $echo "$modename: only absolute run-paths are allowed" 1>&2
+-	    exit 1
+-	    ;;
+-	  esac
+-	  if test "$prev" = rpath; then
+-	    case "$rpath " in
+-	    *" $arg "*) ;;
+-	    *) rpath="$rpath $arg" ;;
+-	    esac
+-	  else
+-	    case "$xrpath " in
+-	    *" $arg "*) ;;
+-	    *) xrpath="$xrpath $arg" ;;
+-	    esac
+-	  fi
+-	  prev=
+-	  continue
+-	  ;;
+-	xcompiler)
+-	  compiler_flags="$compiler_flags $qarg"
+-	  prev=
+-	  compile_command="$compile_command $qarg"
+-	  finalize_command="$finalize_command $qarg"
+-	  continue
+-	  ;;
+-	xlinker)
+-	  linker_flags="$linker_flags $qarg"
+-	  compiler_flags="$compiler_flags $wl$qarg"
+-	  prev=
+-	  compile_command="$compile_command $wl$qarg"
+-	  finalize_command="$finalize_command $wl$qarg"
+-	  continue
+-	  ;;
+-	*)
+-	  eval "$prev=\"\$arg\""
+-	  prev=
+-	  continue
+-	  ;;
+-	esac
+-      fi # test -n $prev
++# func_resolve_sysroot PATH
++# Replace a leading = in PATH with a sysroot.  Store the result into
++# func_resolve_sysroot_result
++func_resolve_sysroot ()
++{
++  func_resolve_sysroot_result=$1
++  case $func_resolve_sysroot_result in
++  =*)
++    func_stripname '=' '' "$func_resolve_sysroot_result"
++    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
++    ;;
++  esac
++}
+ 
+-      prevarg="$arg"
++# func_replace_sysroot PATH
++# If PATH begins with the sysroot, replace it with = and
++# store the result into func_replace_sysroot_result.
++func_replace_sysroot ()
++{
++  case "$lt_sysroot:$1" in
++  ?*:"$lt_sysroot"*)
++    func_stripname "$lt_sysroot" '' "$1"
++    func_replace_sysroot_result="=$func_stripname_result"
++    ;;
++  *)
++    # Including no sysroot.
++    func_replace_sysroot_result=$1
++    ;;
++  esac
++}
+ 
+-      case $arg in
+-      -all-static)
+-	if test -n "$link_static_flag"; then
+-	  compile_command="$compile_command $link_static_flag"
+-	  finalize_command="$finalize_command $link_static_flag"
++# func_infer_tag arg
++# Infer tagged configuration to use if any are available and
++# if one wasn't chosen via the "--tag" command line option.
++# Only attempt this if the compiler in the base compile
++# command doesn't match the default compiler.
++# arg is usually of the form 'gcc ...'
++func_infer_tag ()
++{
++    $opt_debug
++    if test -n "$available_tags" && test -z "$tagname"; then
++      CC_quoted=
++      for arg in $CC; do
++	func_append_quoted CC_quoted "$arg"
++      done
++      CC_expanded=`func_echo_all $CC`
++      CC_quoted_expanded=`func_echo_all $CC_quoted`
++      case $@ in
++      # Blanks in the command may have been stripped by the calling shell,
++      # but not from the CC environment variable when configure was run.
++      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
++      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
++      # Blanks at the start of $base_compile will cause this to fail
++      # if we don't check for them as well.
++      *)
++	for z in $available_tags; do
++	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
++	    # Evaluate the configuration.
++	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
++	    CC_quoted=
++	    for arg in $CC; do
++	      # Double-quote args containing other shell metacharacters.
++	      func_append_quoted CC_quoted "$arg"
++	    done
++	    CC_expanded=`func_echo_all $CC`
++	    CC_quoted_expanded=`func_echo_all $CC_quoted`
++	    case "$@ " in
++	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
++	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
++	      # The compiler in the base compile command matches
++	      # the one in the tagged configuration.
++	      # Assume this is the tagged configuration we want.
++	      tagname=$z
++	      break
++	      ;;
++	    esac
++	  fi
++	done
++	# If $tagname still isn't set, then no tagged configuration
++	# was found and let the user know that the "--tag" command
++	# line option must be used.
++	if test -z "$tagname"; then
++	  func_echo "unable to infer tagged configuration"
++	  func_fatal_error "specify a tag with \`--tag'"
++#	else
++#	  func_verbose "using $tagname tagged configuration"
+ 	fi
+-	continue
+ 	;;
++      esac
++    fi
++}
+ 
+-      -allow-undefined)
+-	# FIXME: remove this flag sometime in the future.
+-	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+-	continue
+-	;;
+ 
+-      -avoid-version)
+-	avoid_version=yes
+-	continue
+-	;;
+ 
+-      -dlopen)
+-	prev=dlfiles
+-	continue
+-	;;
++# func_write_libtool_object output_name pic_name nonpic_name
++# Create a libtool object file (analogous to a ".la" file),
++# but don't create it if we're doing a dry run.
++func_write_libtool_object ()
++{
++    write_libobj=${1}
++    if test "$build_libtool_libs" = yes; then
++      write_lobj=\'${2}\'
++    else
++      write_lobj=none
++    fi
+ 
+-      -dlpreopen)
+-	prev=dlprefiles
+-	continue
+-	;;
++    if test "$build_old_libs" = yes; then
++      write_oldobj=\'${3}\'
++    else
++      write_oldobj=none
++    fi
+ 
+-      -export-dynamic)
+-	export_dynamic=yes
+-	continue
+-	;;
++    $opt_dry_run || {
++      cat >${write_libobj}T <<EOF
++# $write_libobj - a libtool object file
++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
++#
++# Please DO NOT delete this file!
++# It is necessary for linking the library.
+ 
+-      -export-symbols | -export-symbols-regex)
+-	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+-	  $echo "$modename: more than one -exported-symbols argument is not allowed"
+-	  exit 1
+-	fi
+-	if test "X$arg" = "X-export-symbols"; then
+-	  prev=expsyms
+-	else
+-	  prev=expsyms_regex
+-	fi
+-	continue
+-	;;
++# Name of the PIC object.
++pic_object=$write_lobj
+ 
+-      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+-      # so, if we see these flags be careful not to treat them like -L
+-      -L[A-Z][A-Z]*:*)
+-	case $with_gcc/$host in
+-	no/*-*-irix*)
+-	  compile_command="$compile_command $arg"
+-	  finalize_command="$finalize_command $arg"
+-	  ;;
+-	esac
+-	continue
+-	;;
++# Name of the non-PIC object
++non_pic_object=$write_oldobj
+ 
+-      -L*)
+-	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+-	# We need an absolute path.
+-	case $dir in
+-	[\\/]* | [A-Za-z]:[\\/]*) ;;
+-	*)
+-	  absdir=`cd "$dir" && pwd`
+-	  if test -z "$absdir"; then
+-	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+-	    exit 1
+-	  fi
+-	  dir="$absdir"
+-	  ;;
+-	esac
+-	case "$deplibs " in
+-	*" -L$dir "*) ;;
+-	*)
+-	  deplibs="$deplibs -L$dir"
+-	  lib_search_path="$lib_search_path $dir"
+-	  ;;
+-	esac
+-	case $host in
+-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+-	  case :$dllsearchpath: in
+-	  *":$dir:"*) ;;
+-	  *) dllsearchpath="$dllsearchpath:$dir";;
+-	  esac
+-	  ;;
+-	esac
+-	continue
+-	;;
++EOF
++      $MV "${write_libobj}T" "${write_libobj}"
++    }
++}
+ 
+-      -l*)
+-	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+-	  case $host in
+-	  *-*-cygwin* | *-*-pw32* | *-*-beos*)
+-	    # These systems don't actually have a C or math library (as such)
+-	    continue
+-	    ;;
+-	  *-*-mingw* | *-*-os2*)
+-	    # These systems don't actually have a C library (as such)
+-	    test "X$arg" = "X-lc" && continue
+-	    ;;
+-	  *-*-openbsd*)
+-	    # Do not include libc due to us having libc/libc_r.
+-	    test "X$arg" = "X-lc" && continue
+-	    ;;
+-	  esac
+-	 elif test "X$arg" = "X-lc_r"; then
+-	  case $host in
+-	  *-*-openbsd*)
+-	    # Do not include libc_r directly, use -pthread flag.
+-	    continue
+-	    ;;
+-	  esac
+-	fi
+-	deplibs="$deplibs $arg"
+-	continue
+-	;;
+ 
+-      -module)
+-	module=yes
+-	continue
+-	;;
++##################################################
++# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
++##################################################
++
++# func_convert_core_file_wine_to_w32 ARG
++# Helper function used by file name conversion functions when $build is *nix,
++# and $host is mingw, cygwin, or some other w32 environment. Relies on a
++# correctly configured wine environment available, with the winepath program
++# in $build's $PATH.
++#
++# ARG is the $build file name to be converted to w32 format.
++# Result is available in $func_convert_core_file_wine_to_w32_result, and will
++# be empty on error (or when ARG is empty)
++func_convert_core_file_wine_to_w32 ()
++{
++  $opt_debug
++  func_convert_core_file_wine_to_w32_result="$1"
++  if test -n "$1"; then
++    # Unfortunately, winepath does not exit with a non-zero error code, so we
++    # are forced to check the contents of stdout. On the other hand, if the
++    # command is not found, the shell will set an exit code of 127 and print
++    # *an error message* to stdout. So we must check for both error code of
++    # zero AND non-empty stdout, which explains the odd construction:
++    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
++    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
++      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
++        $SED -e "$lt_sed_naive_backslashify"`
++    else
++      func_convert_core_file_wine_to_w32_result=
++    fi
++  fi
++}
++# end: func_convert_core_file_wine_to_w32
+ 
+-      -no-fast-install)
+-	fast_install=no
+-	continue
+-	;;
+ 
+-      -no-install)
+-	case $host in
+-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+-	  # The PATH hackery in wrapper scripts is required on Windows
+-	  # in order for the loader to find any dlls it needs.
+-	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+-	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+-	  fast_install=no
+-	  ;;
+-	*) no_install=yes ;;
+-	esac
+-	continue
+-	;;
++# func_convert_core_path_wine_to_w32 ARG
++# Helper function used by path conversion functions when $build is *nix, and
++# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
++# configured wine environment available, with the winepath program in $build's
++# $PATH. Assumes ARG has no leading or trailing path separator characters.
++#
++# ARG is path to be converted from $build format to win32.
++# Result is available in $func_convert_core_path_wine_to_w32_result.
++# Unconvertible file (directory) names in ARG are skipped; if no directory names
++# are convertible, then the result may be empty.
++func_convert_core_path_wine_to_w32 ()
++{
++  $opt_debug
++  # unfortunately, winepath doesn't convert paths, only file names
++  func_convert_core_path_wine_to_w32_result=""
++  if test -n "$1"; then
++    oldIFS=$IFS
++    IFS=:
++    for func_convert_core_path_wine_to_w32_f in $1; do
++      IFS=$oldIFS
++      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
++      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
++        if test -z "$func_convert_core_path_wine_to_w32_result"; then
++          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
++        else
++          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
++        fi
++      fi
++    done
++    IFS=$oldIFS
++  fi
++}
++# end: func_convert_core_path_wine_to_w32
+ 
+-      -no-undefined)
+-	allow_undefined=no
+-	continue
+-	;;
+ 
+-      -o) prev=output ;;
++# func_cygpath ARGS...
++# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
++# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
++# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
++# (2), returns the Cygwin file name or path in func_cygpath_result (input
++# file name or path is assumed to be in w32 format, as previously converted
++# from $build's *nix or MSYS format). In case (3), returns the w32 file name
++# or path in func_cygpath_result (input file name or path is assumed to be in
++# Cygwin format). Returns an empty string on error.
++#
++# ARGS are passed to cygpath, with the last one being the file name or path to
++# be converted.
++#
++# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
++# environment variable; do not put it in $PATH.
++func_cygpath ()
++{
++  $opt_debug
++  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
++    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
++    if test "$?" -ne 0; then
++      # on failure, ensure result is empty
++      func_cygpath_result=
++    fi
++  else
++    func_cygpath_result=
++    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
++  fi
++}
++#end: func_cygpath
+ 
+-      -release)
+-	prev=release
+-	continue
+-	;;
+ 
+-      -rpath)
+-	prev=rpath
+-	continue
+-	;;
++# func_convert_core_msys_to_w32 ARG
++# Convert file name or path ARG from MSYS format to w32 format.  Return
++# result in func_convert_core_msys_to_w32_result.
++func_convert_core_msys_to_w32 ()
++{
++  $opt_debug
++  # awkward: cmd appends spaces to result
++  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
++    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
++}
++#end: func_convert_core_msys_to_w32
+ 
+-      -R)
+-	prev=xrpath
+-	continue
+-	;;
+ 
+-      -R*)
+-	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+-	# We need an absolute path.
+-	case $dir in
+-	[\\/]* | [A-Za-z]:[\\/]*) ;;
+-	*)
+-	  $echo "$modename: only absolute run-paths are allowed" 1>&2
+-	  exit 1
+-	  ;;
+-	esac
+-	case "$xrpath " in
+-	*" $dir "*) ;;
+-	*) xrpath="$xrpath $dir" ;;
+-	esac
+-	continue
+-	;;
++# func_convert_file_check ARG1 ARG2
++# Verify that ARG1 (a file name in $build format) was converted to $host
++# format in ARG2. Otherwise, emit an error message, but continue (resetting
++# func_to_host_file_result to ARG1).
++func_convert_file_check ()
++{
++  $opt_debug
++  if test -z "$2" && test -n "$1" ; then
++    func_error "Could not determine host file name corresponding to"
++    func_error "  \`$1'"
++    func_error "Continuing, but uninstalled executables may not work."
++    # Fallback:
++    func_to_host_file_result="$1"
++  fi
++}
++# end func_convert_file_check
+ 
+-      -static)
+-	# The effects of -static are defined in a previous loop.
+-	# We used to do the same as -all-static on platforms that
+-	# didn't have a PIC flag, but the assumption that the effects
+-	# would be equivalent was wrong.  It would break on at least
+-	# Digital Unix and AIX.
+-	continue
+-	;;
+ 
+-      -thread-safe)
+-	thread_safe=yes
+-	continue
+-	;;
++# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
++# Verify that FROM_PATH (a path in $build format) was converted to $host
++# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
++# func_to_host_file_result to a simplistic fallback value (see below).
++func_convert_path_check ()
++{
++  $opt_debug
++  if test -z "$4" && test -n "$3"; then
++    func_error "Could not determine the host path corresponding to"
++    func_error "  \`$3'"
++    func_error "Continuing, but uninstalled executables may not work."
++    # Fallback.  This is a deliberately simplistic "conversion" and
++    # should not be "improved".  See libtool.info.
++    if test "x$1" != "x$2"; then
++      lt_replace_pathsep_chars="s|$1|$2|g"
++      func_to_host_path_result=`echo "$3" |
++        $SED -e "$lt_replace_pathsep_chars"`
++    else
++      func_to_host_path_result="$3"
++    fi
++  fi
++}
++# end func_convert_path_check
+ 
+-      -version-info)
+-	prev=vinfo
+-	continue
+-	;;
+ 
+-      -Wc,*)
+-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+-	arg=
+-	save_ifs="$IFS"; IFS=','
+-	for flag in $args; do
+-	  IFS="$save_ifs"
+-	  case $flag in
+-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	    flag="\"$flag\""
+-	    ;;
+-	  esac
+-	  arg="$arg $wl$flag"
+-	  compiler_flags="$compiler_flags $flag"
+-	done
+-	IFS="$save_ifs"
+-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+-	;;
++# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
++# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
++# and appending REPL if ORIG matches BACKPAT.
++func_convert_path_front_back_pathsep ()
++{
++  $opt_debug
++  case $4 in
++  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
++    ;;
++  esac
++  case $4 in
++  $2 ) func_append func_to_host_path_result "$3"
++    ;;
++  esac
++}
++# end func_convert_path_front_back_pathsep
+ 
+-      -Wl,*)
+-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+-	arg=
+-	save_ifs="$IFS"; IFS=','
+-	for flag in $args; do
+-	  IFS="$save_ifs"
+-	  case $flag in
+-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	    flag="\"$flag\""
+-	    ;;
+-	  esac
+-	  arg="$arg $wl$flag"
+-	  compiler_flags="$compiler_flags $wl$flag"
+-	  linker_flags="$linker_flags $flag"
+-	done
+-	IFS="$save_ifs"
+-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+-	;;
+ 
+-      -Xcompiler)
+-	prev=xcompiler
+-	continue
++##################################################
++# $build to $host FILE NAME CONVERSION FUNCTIONS #
++##################################################
++# invoked via `$to_host_file_cmd ARG'
++#
++# In each case, ARG is the path to be converted from $build to $host format.
++# Result will be available in $func_to_host_file_result.
++
++
++# func_to_host_file ARG
++# Converts the file name ARG from $build format to $host format. Return result
++# in func_to_host_file_result.
++func_to_host_file ()
++{
++  $opt_debug
++  $to_host_file_cmd "$1"
++}
++# end func_to_host_file
++
++
++# func_to_tool_file ARG LAZY
++# converts the file name ARG from $build format to toolchain format. Return
++# result in func_to_tool_file_result.  If the conversion in use is listed
++# in (the comma separated) LAZY, no conversion takes place.
++func_to_tool_file ()
++{
++  $opt_debug
++  case ,$2, in
++    *,"$to_tool_file_cmd",*)
++      func_to_tool_file_result=$1
++      ;;
++    *)
++      $to_tool_file_cmd "$1"
++      func_to_tool_file_result=$func_to_host_file_result
++      ;;
++  esac
++}
++# end func_to_tool_file
++
++
++# func_convert_file_noop ARG
++# Copy ARG to func_to_host_file_result.
++func_convert_file_noop ()
++{
++  func_to_host_file_result="$1"
++}
++# end func_convert_file_noop
++
++
++# func_convert_file_msys_to_w32 ARG
++# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
++# conversion to w32 is not available inside the cwrapper.  Returns result in
++# func_to_host_file_result.
++func_convert_file_msys_to_w32 ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    func_convert_core_msys_to_w32 "$1"
++    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_msys_to_w32
++
++
++# func_convert_file_cygwin_to_w32 ARG
++# Convert file name ARG from Cygwin to w32 format.  Returns result in
++# func_to_host_file_result.
++func_convert_file_cygwin_to_w32 ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
++    # LT_CYGPATH in this case.
++    func_to_host_file_result=`cygpath -m "$1"`
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_cygwin_to_w32
++
++
++# func_convert_file_nix_to_w32 ARG
++# Convert file name ARG from *nix to w32 format.  Requires a wine environment
++# and a working winepath. Returns result in func_to_host_file_result.
++func_convert_file_nix_to_w32 ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    func_convert_core_file_wine_to_w32 "$1"
++    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_nix_to_w32
++
++
++# func_convert_file_msys_to_cygwin ARG
++# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
++# Returns result in func_to_host_file_result.
++func_convert_file_msys_to_cygwin ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    func_convert_core_msys_to_w32 "$1"
++    func_cygpath -u "$func_convert_core_msys_to_w32_result"
++    func_to_host_file_result="$func_cygpath_result"
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_msys_to_cygwin
++
++
++# func_convert_file_nix_to_cygwin ARG
++# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
++# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
++# in func_to_host_file_result.
++func_convert_file_nix_to_cygwin ()
++{
++  $opt_debug
++  func_to_host_file_result="$1"
++  if test -n "$1"; then
++    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
++    func_convert_core_file_wine_to_w32 "$1"
++    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
++    func_to_host_file_result="$func_cygpath_result"
++  fi
++  func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_nix_to_cygwin
++
++
++#############################################
++# $build to $host PATH CONVERSION FUNCTIONS #
++#############################################
++# invoked via `$to_host_path_cmd ARG'
++#
++# In each case, ARG is the path to be converted from $build to $host format.
++# The result will be available in $func_to_host_path_result.
++#
++# Path separators are also converted from $build format to $host format.  If
++# ARG begins or ends with a path separator character, it is preserved (but
++# converted to $host format) on output.
++#
++# All path conversion functions are named using the following convention:
++#   file name conversion function    : func_convert_file_X_to_Y ()
++#   path conversion function         : func_convert_path_X_to_Y ()
++# where, for any given $build/$host combination the 'X_to_Y' value is the
++# same.  If conversion functions are added for new $build/$host combinations,
++# the two new functions must follow this pattern, or func_init_to_host_path_cmd
++# will break.
++
++
++# func_init_to_host_path_cmd
++# Ensures that function "pointer" variable $to_host_path_cmd is set to the
++# appropriate value, based on the value of $to_host_file_cmd.
++to_host_path_cmd=
++func_init_to_host_path_cmd ()
++{
++  $opt_debug
++  if test -z "$to_host_path_cmd"; then
++    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
++    to_host_path_cmd="func_convert_path_${func_stripname_result}"
++  fi
++}
++
++
++# func_to_host_path ARG
++# Converts the path ARG from $build format to $host format. Return result
++# in func_to_host_path_result.
++func_to_host_path ()
++{
++  $opt_debug
++  func_init_to_host_path_cmd
++  $to_host_path_cmd "$1"
++}
++# end func_to_host_path
++
++
++# func_convert_path_noop ARG
++# Copy ARG to func_to_host_path_result.
++func_convert_path_noop ()
++{
++  func_to_host_path_result="$1"
++}
++# end func_convert_path_noop
++
++
++# func_convert_path_msys_to_w32 ARG
++# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
++# conversion to w32 is not available inside the cwrapper.  Returns result in
++# func_to_host_path_result.
++func_convert_path_msys_to_w32 ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # Remove leading and trailing path separator characters from ARG.  MSYS
++    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
++    # and winepath ignores them completely.
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
++    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
++    func_convert_path_check : ";" \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++  fi
++}
++# end func_convert_path_msys_to_w32
++
++
++# func_convert_path_cygwin_to_w32 ARG
++# Convert path ARG from Cygwin to w32 format.  Returns result in
++# func_to_host_file_result.
++func_convert_path_cygwin_to_w32 ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # See func_convert_path_msys_to_w32:
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
++    func_convert_path_check : ";" \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++  fi
++}
++# end func_convert_path_cygwin_to_w32
++
++
++# func_convert_path_nix_to_w32 ARG
++# Convert path ARG from *nix to w32 format.  Requires a wine environment and
++# a working winepath.  Returns result in func_to_host_file_result.
++func_convert_path_nix_to_w32 ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # See func_convert_path_msys_to_w32:
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
++    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
++    func_convert_path_check : ";" \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++  fi
++}
++# end func_convert_path_nix_to_w32
++
++
++# func_convert_path_msys_to_cygwin ARG
++# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
++# Returns result in func_to_host_file_result.
++func_convert_path_msys_to_cygwin ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # See func_convert_path_msys_to_w32:
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
++    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
++    func_to_host_path_result="$func_cygpath_result"
++    func_convert_path_check : : \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
++  fi
++}
++# end func_convert_path_msys_to_cygwin
++
++
++# func_convert_path_nix_to_cygwin ARG
++# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
++# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
++# func_to_host_file_result.
++func_convert_path_nix_to_cygwin ()
++{
++  $opt_debug
++  func_to_host_path_result="$1"
++  if test -n "$1"; then
++    # Remove leading and trailing path separator characters from
++    # ARG. msys behavior is inconsistent here, cygpath turns them
++    # into '.;' and ';.', and winepath ignores them completely.
++    func_stripname : : "$1"
++    func_to_host_path_tmp1=$func_stripname_result
++    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
++    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
++    func_to_host_path_result="$func_cygpath_result"
++    func_convert_path_check : : \
++      "$func_to_host_path_tmp1" "$func_to_host_path_result"
++    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
++  fi
++}
++# end func_convert_path_nix_to_cygwin
++
++
++# func_mode_compile arg...
++func_mode_compile ()
++{
++    $opt_debug
++    # Get the compilation command and the source file.
++    base_compile=
++    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
++    suppress_opt=yes
++    suppress_output=
++    arg_mode=normal
++    libobj=
++    later=
++    pie_flag=
++
++    for arg
++    do
++      case $arg_mode in
++      arg  )
++	# do not "continue".  Instead, add this to base_compile
++	lastarg="$arg"
++	arg_mode=normal
+ 	;;
+ 
+-      -Xlinker)
+-	prev=xlinker
++      target )
++	libobj="$arg"
++	arg_mode=normal
+ 	continue
+ 	;;
+ 
+-      # Some other compiler flag.
+-      -* | +*)
+-	# Unknown arguments in both finalize_command and compile_command need
+-	# to be aesthetically quoted because they are evaled later.
+-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
++      normal )
++	# Accept any command-line options.
+ 	case $arg in
+-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	  arg="\"$arg\""
++	-o)
++	  test -n "$libobj" && \
++	    func_fatal_error "you cannot specify \`-o' more than once"
++	  arg_mode=target
++	  continue
+ 	  ;;
+-	esac
+-	;;
+ 
+-      *.lo | *.$objext)
+-	# A library or standard object.
+-	if test "$prev" = dlfiles; then
+-	  # This file was specified with -dlopen.
+-	  if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+-	    dlfiles="$dlfiles $arg"
+-	    prev=
+-	    continue
+-	  else
+-	    # If libtool objects are unsupported, then we need to preload.
+-	    prev=dlprefiles
+-	  fi
+-	fi
++	-pie | -fpie | -fPIE)
++          func_append pie_flag " $arg"
++	  continue
++	  ;;
+ 
+-	if test "$prev" = dlprefiles; then
+-	  # Preload the old-style object.
+-	  dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
+-	  prev=
+-	else
+-	  case $arg in
+-	  *.lo) libobjs="$libobjs $arg" ;;
+-	  *) objs="$objs $arg" ;;
+-	  esac
+-	fi
++	-shared | -static | -prefer-pic | -prefer-non-pic)
++	  func_append later " $arg"
++	  continue
++	  ;;
++
++	-no-suppress)
++	  suppress_opt=no
++	  continue
++	  ;;
++
++	-Xcompiler)
++	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
++	  continue      #  The current "srcfile" will either be retained or
++	  ;;            #  replaced later.  I would guess that would be a bug.
++
++	-Wc,*)
++	  func_stripname '-Wc,' '' "$arg"
++	  args=$func_stripname_result
++	  lastarg=
++	  save_ifs="$IFS"; IFS=','
++	  for arg in $args; do
++	    IFS="$save_ifs"
++	    func_append_quoted lastarg "$arg"
++	  done
++	  IFS="$save_ifs"
++	  func_stripname ' ' '' "$lastarg"
++	  lastarg=$func_stripname_result
++
++	  # Add the arguments to base_compile.
++	  func_append base_compile " $lastarg"
++	  continue
++	  ;;
++
++	*)
++	  # Accept the current argument as the source file.
++	  # The previous "srcfile" becomes the current argument.
++	  #
++	  lastarg="$srcfile"
++	  srcfile="$arg"
++	  ;;
++	esac  #  case $arg
+ 	;;
++      esac    #  case $arg_mode
+ 
+-      *.$libext)
+-	# An archive.
+-	deplibs="$deplibs $arg"
+-	old_deplibs="$old_deplibs $arg"
++      # Aesthetically quote the previous argument.
++      func_append_quoted base_compile "$lastarg"
++    done # for arg
++
++    case $arg_mode in
++    arg)
++      func_fatal_error "you must specify an argument for -Xcompile"
++      ;;
++    target)
++      func_fatal_error "you must specify a target with \`-o'"
++      ;;
++    *)
++      # Get the name of the library object.
++      test -z "$libobj" && {
++	func_basename "$srcfile"
++	libobj="$func_basename_result"
++      }
++      ;;
++    esac
++
++    # Recognize several different file suffixes.
++    # If the user specifies -o file.o, it is replaced with file.lo
++    case $libobj in
++    *.[cCFSifmso] | \
++    *.ada | *.adb | *.ads | *.asm | \
++    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
++    *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
++      func_xform "$libobj"
++      libobj=$func_xform_result
++      ;;
++    esac
++
++    case $libobj in
++    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
++    *)
++      func_fatal_error "cannot determine name of library object from \`$libobj'"
++      ;;
++    esac
++
++    func_infer_tag $base_compile
++
++    for arg in $later; do
++      case $arg in
++      -shared)
++	test "$build_libtool_libs" != yes && \
++	  func_fatal_configuration "can not build a shared library"
++	build_old_libs=no
+ 	continue
+ 	;;
+ 
+-      *.la)
+-	# A libtool-controlled library.
++      -static)
++	build_libtool_libs=no
++	build_old_libs=yes
++	continue
++	;;
+ 
+-	if test "$prev" = dlfiles; then
+-	  # This library was specified with -dlopen.
+-	  dlfiles="$dlfiles $arg"
+-	  prev=
+-	elif test "$prev" = dlprefiles; then
+-	  # The library was specified with -dlpreopen.
+-	  dlprefiles="$dlprefiles $arg"
+-	  prev=
+-	else
+-	  deplibs="$deplibs $arg"
+-	fi
++      -prefer-pic)
++	pic_mode=yes
+ 	continue
+ 	;;
+ 
+-      # Some other compiler argument.
+-      *)
+-	# Unknown arguments in both finalize_command and compile_command need
+-	# to be aesthetically quoted because they are evaled later.
+-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+-	case $arg in
+-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+-	  arg="\"$arg\""
+-	  ;;
+-	esac
++      -prefer-non-pic)
++	pic_mode=no
++	continue
+ 	;;
+-      esac # arg
++      esac
++    done
+ 
+-      # Now actually substitute the argument into the commands.
+-      if test -n "$arg"; then
+-	compile_command="$compile_command $arg"
+-	finalize_command="$finalize_command $arg"
+-      fi
+-    done # argument parsing loop
++    func_quote_for_eval "$libobj"
++    test "X$libobj" != "X$func_quote_for_eval_result" \
++      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
++      && func_warning "libobj name \`$libobj' may not contain shell special characters."
++    func_dirname_and_basename "$obj" "/" ""
++    objname="$func_basename_result"
++    xdir="$func_dirname_result"
++    lobj=${xdir}$objdir/$objname
+ 
+-    if test -n "$prev"; then
+-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+-      $echo "$help" 1>&2
+-      exit 1
+-    fi
++    test -z "$base_compile" && \
++      func_fatal_help "you must specify a compilation command"
+ 
+-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+-      eval arg=\"$export_dynamic_flag_spec\"
+-      compile_command="$compile_command $arg"
+-      finalize_command="$finalize_command $arg"
++    # Delete any leftover library objects.
++    if test "$build_old_libs" = yes; then
++      removelist="$obj $lobj $libobj ${libobj}T"
++    else
++      removelist="$lobj $libobj ${libobj}T"
+     fi
+ 
+-    # calculate the name of the file, without its directory
+-    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+-    libobjs_save="$libobjs"
++    # On Cygwin there's no "real" PIC flag so we must build both object types
++    case $host_os in
++    cygwin* | mingw* | pw32* | os2* | cegcc*)
++      pic_mode=default
++      ;;
++    esac
++    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
++      # non-PIC code in shared libraries is not supported
++      pic_mode=default
++    fi
+ 
+-    if test -n "$shlibpath_var"; then
+-      # get the directories listed in $shlibpath_var
+-      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
++    # Calculate the filename of the output object if compiler does
++    # not support -o with -c
++    if test "$compiler_c_o" = no; then
++      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
++      lockfile="$output_obj.lock"
+     else
+-      shlib_search_path=
++      output_obj=
++      need_locks=no
++      lockfile=
+     fi
+-    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+ 
+-    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+-    if test "X$output_objdir" = "X$output"; then
+-      output_objdir="$objdir"
+-    else
+-      output_objdir="$output_objdir/$objdir"
+-    fi
+-    # Create the object directory.
+-    if test ! -d $output_objdir; then
+-      $show "$mkdir $output_objdir"
+-      $run $mkdir $output_objdir
+-      status=$?
+-      if test $status -ne 0 && test ! -d $output_objdir; then
+-	exit $status
+-      fi
+-    fi
++    # Lock this critical section if it is needed
++    # We use this script file to make the link, it avoids creating a new file
++    if test "$need_locks" = yes; then
++      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
++	func_echo "Waiting for $lockfile to be removed"
++	sleep 2
++      done
++    elif test "$need_locks" = warn; then
++      if test -f "$lockfile"; then
++	$ECHO "\
++*** ERROR, $lockfile exists and contains:
++`cat $lockfile 2>/dev/null`
+ 
+-    # Determine the type of output
+-    case $output in
+-    "")
+-      $echo "$modename: you must specify an output file" 1>&2
+-      $echo "$help" 1>&2
+-      exit 1
+-      ;;
+-    *.$libext) linkmode=oldlib ;;
+-    *.lo | *.$objext) linkmode=obj ;;
+-    *.la) linkmode=lib ;;
+-    *) linkmode=prog ;; # Anything else should be a program.
+-    esac
++This indicates that another process is trying to use the same
++temporary object file, and libtool could not work around it because
++your compiler does not support \`-c' and \`-o' together.  If you
++repeat this compilation, it may succeed, by chance, but you had better
++avoid parallel builds (make -j) in this platform, or get a better
++compiler."
+ 
+-    specialdeplibs=
+-    libs=
+-    # Find all interdependent deplibs by searching for libraries
+-    # that are linked more than once (e.g. -la -lb -la)
+-    for deplib in $deplibs; do
+-      case "$libs " in
+-      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+-      esac
+-      libs="$libs $deplib"
+-    done
+-    deplibs=
+-    newdependency_libs=
+-    newlib_search_path=
+-    need_relink=no # whether we're linking any uninstalled libtool libraries
+-    notinst_deplibs= # not-installed libtool libraries
+-    notinst_path= # paths that contain not-installed libtool libraries
+-    case $linkmode in
+-    lib)
+-	passes="conv link"
+-	for file in $dlfiles $dlprefiles; do
+-	  case $file in
+-	  *.la) ;;
+-	  *)
+-	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+-	    exit 1
+-	    ;;
+-	  esac
+-	done
+-	;;
+-    prog)
+-	compile_deplibs=
+-	finalize_deplibs=
+-	alldeplibs=no
+-	newdlfiles=
+-	newdlprefiles=
+-	passes="conv scan dlopen dlpreopen link"
+-	;;
+-    *)  passes="conv"
+-	;;
+-    esac
+-    for pass in $passes; do
+-      if test $linkmode = prog; then
+-	# Determine which files to process
+-	case $pass in
+-	dlopen)
+-	  libs="$dlfiles"
+-	  save_deplibs="$deplibs" # Collect dlpreopened libraries
+-	  deplibs=
+-	  ;;
+-	dlpreopen) libs="$dlprefiles" ;;
+-	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+-	esac
++	$opt_dry_run || $RM $removelist
++	exit $EXIT_FAILURE
+       fi
+-      for deplib in $libs; do
+-	lib=
+-	found=no
+-	case $deplib in
+-	-l*)
+-	  if test $linkmode = oldlib && test $linkmode = obj; then
+-	    $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2
+-	    continue
+-	  fi
+-	  if test $pass = conv; then
+-	    deplibs="$deplib $deplibs"
+-	    continue
+-	  fi
+-	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+-	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+-	    # Search the libtool library
+-	    lib="$searchdir/lib${name}.la"
+-	    if test -f "$lib"; then
+-	      found=yes
+-	      break
+-	    fi
+-	  done
+-	  if test "$found" != yes; then
+-	    # deplib doesn't seem to be a libtool library
+-	    if test "$linkmode,$pass" = "prog,link"; then
+-	      compile_deplibs="$deplib $compile_deplibs"
+-	      finalize_deplibs="$deplib $finalize_deplibs"
+-	    else
+-	      deplibs="$deplib $deplibs"
+-	      test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs"
+-	    fi
+-	    continue
+-	  fi
+-	  ;; # -l
+-	-L*)
+-	  case $linkmode in
+-	  lib)
+-	    deplibs="$deplib $deplibs"
+-	    test $pass = conv && continue
+-	    newdependency_libs="$deplib $newdependency_libs"
+-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+-	    ;;
+-	  prog)
+-	    if test $pass = conv; then
+-	      deplibs="$deplib $deplibs"
+-	      continue
+-	    fi
+-	    if test $pass = scan; then
+-	      deplibs="$deplib $deplibs"
+-	      newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+-	    else
+-	      compile_deplibs="$deplib $compile_deplibs"
+-	      finalize_deplibs="$deplib $finalize_deplibs"
+-	    fi
+-	    ;;
+-	  *)
+-	    $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2
+-	    ;;
+-	  esac # linkmode
+-	  continue
+-	  ;; # -L
+-	-R*)
+-	  if test $pass = link; then
+-	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+-	    # Make sure the xrpath contains only unique directories.
+-	    case "$xrpath " in
+-	    *" $dir "*) ;;
+-	    *) xrpath="$xrpath $dir" ;;
+-	    esac
+-	  fi
+-	  deplibs="$deplib $deplibs"
+-	  continue
+-	  ;;
+-	*.la) lib="$deplib" ;;
+-	*.$libext)
+-	  if test $pass = conv; then
+-	    deplibs="$deplib $deplibs"
+-	    continue
+-	  fi
+-	  case $linkmode in
+-	  lib)
+-	    if test "$deplibs_check_method" != pass_all; then
+-	      echo
+-	      echo "*** Warning: This library needs some functionality provided by $deplib."
+-	      echo "*** I have the capability to make that library automatically link in when"
+-	      echo "*** you link to this library.  But I can only do this if you have a"
+-	      echo "*** shared version of the library, which you do not appear to have."
+-	    else
+-	      echo
+-	      echo "*** Warning: Linking the shared library $output against the"
+-	      echo "*** static library $deplib is not portable!"
+-	      deplibs="$deplib $deplibs"
+-	    fi
+-	    continue
+-	    ;;
+-	  prog)
+-	    if test $pass != link; then
+-	      deplibs="$deplib $deplibs"
+-	    else
+-	      compile_deplibs="$deplib $compile_deplibs"
+-	      finalize_deplibs="$deplib $finalize_deplibs"
+-	    fi
+-	    continue
+-	    ;;
+-	  esac # linkmode
+-	  ;; # *.$libext
+-	*.lo | *.$objext)
+-	  if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+-	    # If there is no dlopen support or we're linking statically,
+-	    # we need to preload.
+-	    newdlprefiles="$newdlprefiles $deplib"
+-	    compile_deplibs="$deplib $compile_deplibs"
+-	    finalize_deplibs="$deplib $finalize_deplibs"
+-	  else
+-	    newdlfiles="$newdlfiles $deplib"
+-	  fi
+-	  continue
+-	  ;;
+-	%DEPLIBS%)
+-	  alldeplibs=yes
+-	  continue
+-	  ;;
+-	esac # case $deplib
+-	if test $found = yes || test -f "$lib"; then :
+-	else
+-	  $echo "$modename: cannot find the library \`$lib'" 1>&2
+-	  exit 1
+-	fi
++      func_append removelist " $output_obj"
++      $ECHO "$srcfile" > "$lockfile"
++    fi
+ 
+-	# Check to see that this really is a libtool archive.
+-	if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+-	else
+-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+-	  exit 1
+-	fi
++    $opt_dry_run || $RM $removelist
++    func_append removelist " $lockfile"
++    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
++
++    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
++    srcfile=$func_to_tool_file_result
++    func_quote_for_eval "$srcfile"
++    qsrcfile=$func_quote_for_eval_result
+ 
+-	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+-	test "X$ladir" = "X$lib" && ladir="."
++    # Only build a PIC object if we are building libtool libraries.
++    if test "$build_libtool_libs" = yes; then
++      # Without this assignment, base_compile gets emptied.
++      fbsd_hideous_sh_bug=$base_compile
+ 
+-	dlname=
+-	dlopen=
+-	dlpreopen=
+-	libdir=
+-	library_names=
+-	old_library=
+-	# If the library was installed with an old release of libtool,
+-	# it will not redefine variable installed.
+-	installed=yes
++      if test "$pic_mode" != no; then
++	command="$base_compile $qsrcfile $pic_flag"
++      else
++	# Don't build PIC code
++	command="$base_compile $qsrcfile"
++      fi
+ 
+-	# Read the .la file
+-	case $lib in
+-	*/* | *\\*) . $lib ;;
+-	*) . ./$lib ;;
+-	esac
++      func_mkdir_p "$xdir$objdir"
+ 
+-	if test "$linkmode,$pass" = "lib,link" ||
+-	   test "$linkmode,$pass" = "prog,scan" ||
+-	   { test $linkmode = oldlib && test $linkmode = obj; }; then
+-	   # Add dl[pre]opened files of deplib
+-	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+-	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+-	fi
++      if test -z "$output_obj"; then
++	# Place PIC objects in $objdir
++	func_append command " -o $lobj"
++      fi
+ 
+-	if test $pass = conv; then
+-	  # Only check for convenience libraries
+-	  deplibs="$lib $deplibs"
+-	  if test -z "$libdir"; then
+-	    if test -z "$old_library"; then
+-	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+-	      exit 1
+-	    fi
+-	    # It is a libtool convenience library, so add in its objects.
+-	    convenience="$convenience $ladir/$objdir/$old_library"
+-	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
+-	    tmp_libs=
+-	    for deplib in $dependency_libs; do
+-	      deplibs="$deplib $deplibs"
+-	      case "$tmp_libs " in
+-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+-	      esac
+-	      tmp_libs="$tmp_libs $deplib"
+-	    done
+-	  elif test $linkmode != prog && test $linkmode != lib; then
+-	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
+-	    exit 1
+-	  fi
+-	  continue
+-	fi # $pass = conv
++      func_show_eval_locale "$command"	\
++          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+ 
+-	# Get the name of the library we link against.
+-	linklib=
+-	for l in $old_library $library_names; do
+-	  linklib="$l"
+-	done
+-	if test -z "$linklib"; then
+-	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+-	  exit 1
+-	fi
++      if test "$need_locks" = warn &&
++	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
++	$ECHO "\
++*** ERROR, $lockfile contains:
++`cat $lockfile 2>/dev/null`
+ 
+-	# This library was specified with -dlopen.
+-	if test $pass = dlopen; then
+-	  if test -z "$libdir"; then
+-	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+-	    exit 1
+-	  fi
+-	  if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+-	    # If there is no dlname, no dlopen support or we're linking
+-	    # statically, we need to preload.
+-	    dlprefiles="$dlprefiles $lib"
+-	  else
+-	    newdlfiles="$newdlfiles $lib"
+-	  fi
+-	  continue
+-	fi # $pass = dlopen
++but it should contain:
++$srcfile
+ 
+-	# We need an absolute path.
+-	case $ladir in
+-	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+-	*)
+-	  abs_ladir=`cd "$ladir" && pwd`
+-	  if test -z "$abs_ladir"; then
+-	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+-	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+-	    abs_ladir="$ladir"
+-	  fi
+-	  ;;
+-	esac
+-	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
++This indicates that another process is trying to use the same
++temporary object file, and libtool could not work around it because
++your compiler does not support \`-c' and \`-o' together.  If you
++repeat this compilation, it may succeed, by chance, but you had better
++avoid parallel builds (make -j) in this platform, or get a better
++compiler."
+ 
+-	# Find the relevant object directory and library name.
+-	if test "X$installed" = Xyes; then
+-	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+-	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
+-	    dir="$ladir"
+-	    absdir="$abs_ladir"
+-	    libdir="$abs_ladir"
+-	  else
+-	    dir="$libdir"
+-	    absdir="$libdir"
+-	  fi
+-	else
+-	  dir="$ladir/$objdir"
+-	  absdir="$abs_ladir/$objdir"
+-	  # Remove this search path later
+-	  notinst_path="$notinst_path $abs_ladir"
+-	fi # $installed = yes
+-	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
++	$opt_dry_run || $RM $removelist
++	exit $EXIT_FAILURE
++      fi
+ 
+-	# This library was specified with -dlpreopen.
+-	if test $pass = dlpreopen; then
+-	  if test -z "$libdir"; then
+-	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+-	    exit 1
+-	  fi
+-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
+-	  # are required to link).
+-	  if test -n "$old_library"; then
+-	    newdlprefiles="$newdlprefiles $dir/$old_library"
+-	  # Otherwise, use the dlname, so that lt_dlopen finds it.
+-	  elif test -n "$dlname"; then
+-	    newdlprefiles="$newdlprefiles $dir/$dlname"
+-	  else
+-	    newdlprefiles="$newdlprefiles $dir/$linklib"
+-	  fi
+-	fi # $pass = dlpreopen
++      # Just move the object if needed, then go on to compile the next one
++      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
++	func_show_eval '$MV "$output_obj" "$lobj"' \
++	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
++      fi
+ 
+-	if test -z "$libdir"; then
+-	  # Link the convenience library
+-	  if test $linkmode = lib; then
+-	    deplibs="$dir/$old_library $deplibs"
+-	  elif test "$linkmode,$pass" = "prog,link"; then
+-	    compile_deplibs="$dir/$old_library $compile_deplibs"
+-	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+-	  else
+-	    deplibs="$lib $deplibs"
+-	  fi
+-	  continue
+-	fi
++      # Allow error messages only from the first compilation.
++      if test "$suppress_opt" = yes; then
++	suppress_output=' >/dev/null 2>&1'
++      fi
++    fi
+ 
+-	if test $linkmode = prog && test $pass != link; then
+-	  newlib_search_path="$newlib_search_path $ladir"
+-	  deplibs="$lib $deplibs"
++    # Only build a position-dependent object if we build old libraries.
++    if test "$build_old_libs" = yes; then
++      if test "$pic_mode" != yes; then
++	# Don't build PIC code
++	command="$base_compile $qsrcfile$pie_flag"
++      else
++	command="$base_compile $qsrcfile $pic_flag"
++      fi
++      if test "$compiler_c_o" = yes; then
++	func_append command " -o $obj"
++      fi
+ 
+-	  linkalldeplibs=no
+-	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+-	     test "$build_libtool_libs" = no; then
+-	    linkalldeplibs=yes
+-	  fi
++      # Suppress compiler output if we already did a PIC compilation.
++      func_append command "$suppress_output"
++      func_show_eval_locale "$command" \
++        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+ 
+-	  tmp_libs=
+-	  for deplib in $dependency_libs; do
+-	    case $deplib in
+-	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+-	    esac
+-	    # Need to link against all dependency_libs?
+-	    if test $linkalldeplibs = yes; then
+-	      deplibs="$deplib $deplibs"
+-	    else
+-	      # Need to hardcode shared library paths
+-	      # or/and link against static libraries
+-	      newdependency_libs="$deplib $newdependency_libs"
+-	    fi
+-	    case "$tmp_libs " in
+-	    *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+-	    esac
+-	    tmp_libs="$tmp_libs $deplib"
+-	  done # for deplib
+-	  continue
+-	fi # $linkmode = prog...
++      if test "$need_locks" = warn &&
++	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
++	$ECHO "\
++*** ERROR, $lockfile contains:
++`cat $lockfile 2>/dev/null`
+ 
+-	link_static=no # Whether the deplib will be linked statically
+-	if test -n "$library_names" &&
+-	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+-	  # Link against this shared library
++but it should contain:
++$srcfile
+ 
+-	  if test "$linkmode,$pass" = "prog,link" ||
+-	   { test $linkmode = lib && test $hardcode_into_libs = yes; }; then
+-	    # Hardcode the library path.
+-	    # Skip directories that are in the system default run-time
+-	    # search path.
+-	    case " $sys_lib_dlsearch_path " in
+-	    *" $absdir "*) ;;
+-	    *)
+-	      case "$compile_rpath " in
+-	      *" $absdir "*) ;;
+-	      *) compile_rpath="$compile_rpath $absdir"
+-	      esac
+-	      ;;
+-	    esac
+-	    case " $sys_lib_dlsearch_path " in
+-	    *" $libdir "*) ;;
+-	    *)
+-	      case "$finalize_rpath " in
+-	      *" $libdir "*) ;;
+-	      *) finalize_rpath="$finalize_rpath $libdir"
+-	      esac
+-	      ;;
+-	    esac
+-	    if test $linkmode = prog; then
+-	      # We need to hardcode the library path
+-	      if test -n "$shlibpath_var"; then
+-		# Make sure the rpath contains only unique directories.
+-		case "$temp_rpath " in
+-		*" $dir "*) ;;
+-		*" $absdir "*) ;;
+-		*) temp_rpath="$temp_rpath $dir" ;;
+-		esac
+-	      fi
+-	    fi
+-	  fi # $linkmode,$pass = prog,link...
++This indicates that another process is trying to use the same
++temporary object file, and libtool could not work around it because
++your compiler does not support \`-c' and \`-o' together.  If you
++repeat this compilation, it may succeed, by chance, but you had better
++avoid parallel builds (make -j) in this platform, or get a better
++compiler."
+ 
+-	  if test "$alldeplibs" = yes &&
+-	     { test "$deplibs_check_method" = pass_all ||
+-	       { test "$build_libtool_libs" = yes &&
+-		 test -n "$library_names"; }; }; then
+-	    # We only need to search for static libraries
+-	    continue
+-	  fi
++	$opt_dry_run || $RM $removelist
++	exit $EXIT_FAILURE
++      fi
+ 
+-	  if test "$installed" = no; then
+-	    notinst_deplibs="$notinst_deplibs $lib"
+-	    need_relink=yes
+-	  fi
++      # Just move the object if needed
++      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
++	func_show_eval '$MV "$output_obj" "$obj"' \
++	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
++      fi
++    fi
+ 
+-	  if test -n "$old_archive_from_expsyms_cmds"; then
+-	    # figure out the soname
+-	    set dummy $library_names
+-	    realname="$2"
+-	    shift; shift
+-	    libname=`eval \\$echo \"$libname_spec\"`
+-	    # use dlname if we got it. it's perfectly good, no?
+-	    if test -n "$dlname"; then
+-	      soname="$dlname"
+-	    elif test -n "$soname_spec"; then
+-	      # bleh windows
+-	      case $host in
+-	      *cygwin*)
+-		major=`expr $current - $age`
+-		versuffix="-$major"
+-		;;
+-	      esac
+-	      eval soname=\"$soname_spec\"
+-	    else
+-	      soname="$realname"
+-	    fi
++    $opt_dry_run || {
++      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+ 
+-	    # Make a new name for the extract_expsyms_cmds to use
+-	    soroot="$soname"
+-	    soname=`echo $soroot | sed -e 's/^.*\///'`
+-	    newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"
++      # Unlock the critical section if it was locked
++      if test "$need_locks" != no; then
++	removelist=$lockfile
++        $RM "$lockfile"
++      fi
++    }
+ 
+-	    # If the library has no export list, then create one now
+-	    if test -f "$output_objdir/$soname-def"; then :
+-	    else
+-	      $show "extracting exported symbol list from \`$soname'"
+-	      save_ifs="$IFS"; IFS='~'
+-	      eval cmds=\"$extract_expsyms_cmds\"
+-	      for cmd in $cmds; do
+-		IFS="$save_ifs"
+-		$show "$cmd"
+-		$run eval "$cmd" || exit $?
+-	      done
+-	      IFS="$save_ifs"
+-	    fi
++    exit $EXIT_SUCCESS
++}
+ 
+-	    # Create $newlib
+-	    if test -f "$output_objdir/$newlib"; then :; else
+-	      $show "generating import library for \`$soname'"
+-	      save_ifs="$IFS"; IFS='~'
+-	      eval cmds=\"$old_archive_from_expsyms_cmds\"
+-	      for cmd in $cmds; do
+-		IFS="$save_ifs"
+-		$show "$cmd"
+-		$run eval "$cmd" || exit $?
+-	      done
+-	      IFS="$save_ifs"
+-	    fi
+-	    # make sure the library variables are pointing to the new library
+-	    dir=$output_objdir
+-	    linklib=$newlib
+-	  fi # test -n $old_archive_from_expsyms_cmds
++$opt_help || {
++  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
++}
+ 
+-	  if test $linkmode = prog || test "$mode" != relink; then
+-	    add_shlibpath=
+-	    add_dir=
+-	    add=
+-	    lib_linked=yes
+-	    case $hardcode_action in
+-	    immediate | unsupported)
+-	      if test "$hardcode_direct" = no; then
+-		add="$dir/$linklib"
+-	      elif test "$hardcode_minus_L" = no; then
+-		case $host in
+-		*-*-sunos*) add_shlibpath="$dir" ;;
+-		esac
+-		add_dir="-L$dir"
+-		add="-l$name"
+-	      elif test "$hardcode_shlibpath_var" = no; then
+-		add_shlibpath="$dir"
+-		add="-l$name"
+-	      else
+-		lib_linked=no
+-	      fi
+-	      ;;
+-	    relink)
+-	      if test "$hardcode_direct" = yes; then
+-		add="$dir/$linklib"
+-	      elif test "$hardcode_minus_L" = yes; then
+-		add_dir="-L$dir"
+-		add="-l$name"
+-	      elif test "$hardcode_shlibpath_var" = yes; then
+-		add_shlibpath="$dir"
+-		add="-l$name"
+-	      else
+-		lib_linked=no
+-	      fi
+-	      ;;
+-	    *) lib_linked=no ;;
+-	    esac
++func_mode_help ()
++{
++    # We need to display help for each of the modes.
++    case $opt_mode in
++      "")
++        # Generic help is extracted from the usage comments
++        # at the start of this file.
++        func_help
++        ;;
++
++      clean)
++        $ECHO \
++"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+ 
+-	    if test "$lib_linked" != yes; then
+-	      $echo "$modename: configuration error: unsupported hardcode properties"
+-	      exit 1
+-	    fi
++Remove files from the build directory.
+ 
+-	    if test -n "$add_shlibpath"; then
+-	      case :$compile_shlibpath: in
+-	      *":$add_shlibpath:"*) ;;
+-	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+-	      esac
+-	    fi
+-	    if test $linkmode = prog; then
+-	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+-	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+-	    else
+-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+-	      test -n "$add" && deplibs="$add $deplibs"
+-	      if test "$hardcode_direct" != yes && \
+-		 test "$hardcode_minus_L" != yes && \
+-		 test "$hardcode_shlibpath_var" = yes; then
+-		case :$finalize_shlibpath: in
+-		*":$libdir:"*) ;;
+-		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+-		esac
+-	      fi
+-	    fi
+-	  fi
++RM is the name of the program to use to delete files associated with each FILE
++(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
++to RM.
+ 
+-	  if test $linkmode = prog || test "$mode" = relink; then
+-	    add_shlibpath=
+-	    add_dir=
+-	    add=
+-	    # Finalize command for both is simple: just hardcode it.
+-	    if test "$hardcode_direct" = yes; then
+-	      add="$libdir/$linklib"
+-	    elif test "$hardcode_minus_L" = yes; then
+-	      add_dir="-L$libdir"
+-	      add="-l$name"
+-	    elif test "$hardcode_shlibpath_var" = yes; then
+-	      case :$finalize_shlibpath: in
+-	      *":$libdir:"*) ;;
+-	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+-	      esac
+-	      add="-l$name"
+-	    else
+-	      # We cannot seem to hardcode it, guess we'll fake it.
+-	      add_dir="-L$libdir"
+-	      add="-l$name"
+-	    fi
++If FILE is a libtool library, object or program, all the files associated
++with it are deleted. Otherwise, only FILE itself is deleted using RM."
++        ;;
+ 
+-	    if test $linkmode = prog; then
+-	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+-	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+-	    else
+-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+-	      test -n "$add" && deplibs="$add $deplibs"
+-	    fi
+-	  fi
+-	elif test $linkmode = prog; then
+-	  if test "$alldeplibs" = yes &&
+-	     { test "$deplibs_check_method" = pass_all ||
+-	       { test "$build_libtool_libs" = yes &&
+-		 test -n "$library_names"; }; }; then
+-	    # We only need to search for static libraries
+-	    continue
+-	  fi
++      compile)
++      $ECHO \
++"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+ 
+-	  # Try to link the static library
+-	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+-	  # is not unsupported.  This is valid on all known static and
+-	  # shared platforms.
+-	  if test "$hardcode_direct" != unsupported; then
+-	    test -n "$old_library" && linklib="$old_library"
+-	    compile_deplibs="$dir/$linklib $compile_deplibs"
+-	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+-	  else
+-	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+-	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+-	  fi
+-	elif test "$build_libtool_libs" = yes; then
+-	  # Not a shared library
+-	  if test "$deplibs_check_method" != pass_all; then
+-	    # We're trying link a shared library against a static one
+-	    # but the system doesn't support it.
++Compile a source file into a libtool library object.
+ 
+-	    # Just print a warning and add the library to dependency_libs so
+-	    # that the program can be linked against the static library.
+-	    echo
+-	    echo "*** Warning: This library needs some functionality provided by $lib."
+-	    echo "*** I have the capability to make that library automatically link in when"
+-	    echo "*** you link to this library.  But I can only do this if you have a"
+-	    echo "*** shared version of the library, which you do not appear to have."
+-	    if test "$module" = yes; then
+-	      echo "*** Therefore, libtool will create a static module, that should work "
+-	      echo "*** as long as the dlopening application is linked with the -dlopen flag."
+-	      if test -z "$global_symbol_pipe"; then
+-		echo
+-		echo "*** However, this would only work if libtool was able to extract symbol"
+-		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+-		echo "*** not find such a program.  So, this module is probably useless."
+-		echo "*** \`nm' from GNU binutils and a full rebuild may help."
+-	      fi
+-	      if test "$build_old_libs" = no; then
+-		build_libtool_libs=module
+-		build_old_libs=yes
+-	      else
+-		build_libtool_libs=no
+-	      fi
+-	    fi
+-	  else
+-	    convenience="$convenience $dir/$old_library"
+-	    old_convenience="$old_convenience $dir/$old_library"
+-	    deplibs="$dir/$old_library $deplibs"
+-	    link_static=yes
+-	  fi
+-	fi # link shared/static library?
++This mode accepts the following additional options:
+ 
+-	if test $linkmode = lib; then
+-	  if test -n "$dependency_libs" &&
+-	     { test $hardcode_into_libs != yes || test $build_old_libs = yes ||
+-	       test $link_static = yes; }; then
+-	    # Extract -R from dependency_libs
+-	    temp_deplibs=
+-	    for libdir in $dependency_libs; do
+-	      case $libdir in
+-	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+-		   case " $xrpath " in
+-		   *" $temp_xrpath "*) ;;
+-		   *) xrpath="$xrpath $temp_xrpath";;
+-		   esac;;
+-	      *) temp_deplibs="$temp_deplibs $libdir";;
+-	      esac
+-	    done
+-	    dependency_libs="$temp_deplibs"
+-	  fi
++  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
++  -no-suppress      do not suppress compiler output for multiple passes
++  -prefer-pic       try to build PIC objects only
++  -prefer-non-pic   try to build non-PIC objects only
++  -shared           do not build a \`.o' file suitable for static linking
++  -static           only build a \`.o' file suitable for static linking
++  -Wc,FLAG          pass FLAG directly to the compiler
+ 
+-	  newlib_search_path="$newlib_search_path $absdir"
+-	  # Link against this library
+-	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+-	  # ... and its dependency_libs
+-	  tmp_libs=
+-	  for deplib in $dependency_libs; do
+-	    newdependency_libs="$deplib $newdependency_libs"
+-	    case "$tmp_libs " in
+-	    *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+-	    esac
+-	    tmp_libs="$tmp_libs $deplib"
+-	  done
++COMPILE-COMMAND is a command to be used in creating a \`standard' object file
++from the given SOURCEFILE.
+ 
+-	  if test $link_all_deplibs != no; then
+-	    # Add the search paths of all dependency libraries
+-	    for deplib in $dependency_libs; do
+-	      case $deplib in
+-	      -L*) path="$deplib" ;;
+-	      *.la)
+-		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+-		test "X$dir" = "X$deplib" && dir="."
+-		# We need an absolute path.
+-		case $dir in
+-		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+-		*)
+-		  absdir=`cd "$dir" && pwd`
+-		  if test -z "$absdir"; then
+-		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+-		    absdir="$dir"
+-		  fi
+-		  ;;
+-		esac
+-		if grep "^installed=no" $deplib > /dev/null; then
+-		  path="-L$absdir/$objdir"
+-		else
+-		  eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+-		  if test -z "$libdir"; then
+-		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+-		    exit 1
+-		  fi
+-		  if test "$absdir" != "$libdir"; then
+-		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+-		  fi
+-		  path="-L$absdir"
+-		fi
+-		;;
+-	      *) continue ;;
+-	      esac
+-	      case " $deplibs " in
+-	      *" $path "*) ;;
+-	      *) deplibs="$deplibs $path" ;;
+-	      esac
+-	    done
+-	  fi # link_all_deplibs != no
+-	fi # linkmode = lib
+-      done # for deplib in $libs
+-      if test $pass = dlpreopen; then
+-	# Link the dlpreopened libraries before other libraries
+-	for deplib in $save_deplibs; do
+-	  deplibs="$deplib $deplibs"
+-	done
+-      fi
+-      if test $pass != dlopen; then
+-	test $pass != scan && dependency_libs="$newdependency_libs"
+-	if test $pass != conv; then
+-	  # Make sure lib_search_path contains only unique directories.
+-	  lib_search_path=
+-	  for dir in $newlib_search_path; do
+-	    case "$lib_search_path " in
+-	    *" $dir "*) ;;
+-	    *) lib_search_path="$lib_search_path $dir" ;;
+-	    esac
+-	  done
+-	  newlib_search_path=
++The output file name is determined by removing the directory component from
++SOURCEFILE, then substituting the C source code suffix \`.c' with the
++library object suffix, \`.lo'."
++        ;;
++
++      execute)
++        $ECHO \
++"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
++
++Automatically set library path, then run a program.
++
++This mode accepts the following additional options:
++
++  -dlopen FILE      add the directory containing FILE to the library path
++
++This mode sets the library path environment variable according to \`-dlopen'
++flags.
++
++If any of the ARGS are libtool executable wrappers, then they are translated
++into their corresponding uninstalled binary, and any of their required library
++directories are added to the library path.
++
++Then, COMMAND is executed, with ARGS as arguments."
++        ;;
++
++      finish)
++        $ECHO \
++"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
++
++Complete the installation of libtool libraries.
++
++Each LIBDIR is a directory that contains libtool libraries.
++
++The commands that this mode executes may require superuser privileges.  Use
++the \`--dry-run' option if you just want to see what would be executed."
++        ;;
++
++      install)
++        $ECHO \
++"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
++
++Install executables or libraries.
++
++INSTALL-COMMAND is the installation command.  The first component should be
++either the \`install' or \`cp' program.
++
++The following components of INSTALL-COMMAND are treated specially:
++
++  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
++
++The rest of the components are interpreted as arguments to that command (only
++BSD-compatible install options are recognized)."
++        ;;
++
++      link)
++        $ECHO \
++"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
++
++Link object files or libraries together to form another library, or to
++create an executable program.
++
++LINK-COMMAND is a command using the C compiler that you would use to create
++a program from several object files.
++
++The following components of LINK-COMMAND are treated specially:
++
++  -all-static       do not do any dynamic linking at all
++  -avoid-version    do not add a version suffix if possible
++  -bindir BINDIR    specify path to binaries directory (for systems where
++                    libraries must be found in the PATH setting at runtime)
++  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
++  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
++  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
++  -export-symbols SYMFILE
++                    try to export only the symbols listed in SYMFILE
++  -export-symbols-regex REGEX
++                    try to export only the symbols matching REGEX
++  -LLIBDIR          search LIBDIR for required installed libraries
++  -lNAME            OUTPUT-FILE requires the installed library libNAME
++  -module           build a library that can dlopened
++  -no-fast-install  disable the fast-install mode
++  -no-install       link a not-installable executable
++  -no-undefined     declare that a library does not refer to external symbols
++  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
++  -objectlist FILE  Use a list of object files found in FILE to specify objects
++  -precious-files-regex REGEX
++                    don't remove output files matching REGEX
++  -release RELEASE  specify package release information
++  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
++  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
++  -shared           only do dynamic linking of libtool libraries
++  -shrext SUFFIX    override the standard shared library file extension
++  -static           do not do any dynamic linking of uninstalled libtool libraries
++  -static-libtool-libs
++                    do not do any dynamic linking of libtool libraries
++  -version-info CURRENT[:REVISION[:AGE]]
++                    specify library version info [each variable defaults to 0]
++  -weak LIBNAME     declare that the target provides the LIBNAME interface
++  -Wc,FLAG
++  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
++  -Wl,FLAG
++  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
++  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
++
++All other options (arguments beginning with \`-') are ignored.
++
++Every other argument is treated as a filename.  Files ending in \`.la' are
++treated as uninstalled libtool libraries, other files are standard or library
++object files.
++
++If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
++only library objects (\`.lo' files) may be specified, and \`-rpath' is
++required, except when creating a convenience library.
++
++If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
++using \`ar' and \`ranlib', or on Windows using \`lib'.
++
++If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
++is created, otherwise an executable program is created."
++        ;;
++
++      uninstall)
++        $ECHO \
++"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
++
++Remove libraries from an installation directory.
++
++RM is the name of the program to use to delete files associated with each FILE
++(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
++to RM.
++
++If FILE is a libtool library, all the files associated with it are deleted.
++Otherwise, only FILE itself is deleted using RM."
++        ;;
++
++      *)
++        func_fatal_help "invalid operation mode \`$opt_mode'"
++        ;;
++    esac
++
++    echo
++    $ECHO "Try \`$progname --help' for more information about other modes."
++}
++
++# Now that we've collected a possible --mode arg, show help if necessary
++if $opt_help; then
++  if test "$opt_help" = :; then
++    func_mode_help
++  else
++    {
++      func_help noexit
++      for opt_mode in compile link execute install finish uninstall clean; do
++	func_mode_help
++      done
++    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
++    {
++      func_help noexit
++      for opt_mode in compile link execute install finish uninstall clean; do
++	echo
++	func_mode_help
++      done
++    } |
++    sed '1d
++      /^When reporting/,/^Report/{
++	H
++	d
++      }
++      $x
++      /information about other modes/d
++      /more detailed .*MODE/d
++      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
++  fi
++  exit $?
++fi
++
++
++# func_mode_execute arg...
++func_mode_execute ()
++{
++    $opt_debug
++    # The first argument is the command name.
++    cmd="$nonopt"
++    test -z "$cmd" && \
++      func_fatal_help "you must specify a COMMAND"
++
++    # Handle -dlopen flags immediately.
++    for file in $opt_dlopen; do
++      test -f "$file" \
++	|| func_fatal_help "\`$file' is not a file"
++
++      dir=
++      case $file in
++      *.la)
++	func_resolve_sysroot "$file"
++	file=$func_resolve_sysroot_result
++
++	# Check to see that this really is a libtool archive.
++	func_lalib_unsafe_p "$file" \
++	  || func_fatal_help "\`$lib' is not a valid libtool archive"
++
++	# Read the libtool library.
++	dlname=
++	library_names=
++	func_source "$file"
++
++	# Skip this library if it cannot be dlopened.
++	if test -z "$dlname"; then
++	  # Warn if it was a shared library.
++	  test -n "$library_names" && \
++	    func_warning "\`$file' was not linked with \`-export-dynamic'"
++	  continue
+ 	fi
+ 
+-	if test "$linkmode,$pass" != "prog,link"; then
+-	  vars="deplibs"
++	func_dirname "$file" "" "."
++	dir="$func_dirname_result"
++
++	if test -f "$dir/$objdir/$dlname"; then
++	  func_append dir "/$objdir"
+ 	else
+-	  vars="compile_deplibs finalize_deplibs"
++	  if test ! -f "$dir/$dlname"; then
++	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
++	  fi
+ 	fi
+-	for var in $vars dependency_libs; do
+-	  # Add libraries to $var in reverse order
+-	  eval tmp_libs=\"\$$var\"
+-	  new_libs=
+-	  for deplib in $tmp_libs; do
+-	    case $deplib in
+-	    -L*) new_libs="$deplib $new_libs" ;;
+-	    *)
+-	      case " $specialdeplibs " in
+-	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+-	      *)
+-		case " $new_libs " in
+-		*" $deplib "*) ;;
+-		*) new_libs="$deplib $new_libs" ;;
+-		esac
+-		;;
+-	      esac
+-	      ;;
+-	    esac
+-	  done
+-	  tmp_libs=
+-	  for deplib in $new_libs; do
+-	    case $deplib in
+-	    -L*)
+-	      case " $tmp_libs " in
+-	      *" $deplib "*) ;;
+-	      *) tmp_libs="$tmp_libs $deplib" ;;
+-	      esac
+-	      ;;
+-	    *) tmp_libs="$tmp_libs $deplib" ;;
+-	    esac
+-	  done
+-	  eval $var=\"$tmp_libs\"
+-	done # for var
+-      fi
+-      if test "$pass" = "conv" &&
+-       { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then
+-	libs="$deplibs" # reset libs
+-	deplibs=
+-      fi
+-    done # for pass
+-    if test $linkmode = prog; then
+-      dlfiles="$newdlfiles"
+-      dlprefiles="$newdlprefiles"
+-    fi
++	;;
+ 
+-    case $linkmode in
+-    oldlib)
+-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+-	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+-      fi
++      *.lo)
++	# Just add the directory containing the .lo file.
++	func_dirname "$file" "" "."
++	dir="$func_dirname_result"
++	;;
++
++      *)
++	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
++	continue
++	;;
++      esac
++
++      # Get the absolute pathname.
++      absdir=`cd "$dir" && pwd`
++      test -n "$absdir" && dir="$absdir"
++
++      # Now add the directory to shlibpath_var.
++      if eval "test -z \"\$$shlibpath_var\""; then
++	eval "$shlibpath_var=\"\$dir\""
++      else
++	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
++      fi
++    done
++
++    # This variable tells wrapper scripts just to set shlibpath_var
++    # rather than running their programs.
++    libtool_execute_magic="$magic"
++
++    # Check if any of the arguments is a wrapper script.
++    args=
++    for file
++    do
++      case $file in
++      -* | *.la | *.lo ) ;;
++      *)
++	# Do a test to see if this is really a libtool program.
++	if func_ltwrapper_script_p "$file"; then
++	  func_source "$file"
++	  # Transform arg to wrapped name.
++	  file="$progdir/$program"
++	elif func_ltwrapper_executable_p "$file"; then
++	  func_ltwrapper_scriptname "$file"
++	  func_source "$func_ltwrapper_scriptname_result"
++	  # Transform arg to wrapped name.
++	  file="$progdir/$program"
++	fi
++	;;
++      esac
++      # Quote arguments (to preserve shell metacharacters).
++      func_append_quoted args "$file"
++    done
++
++    if test "X$opt_dry_run" = Xfalse; then
++      if test -n "$shlibpath_var"; then
++	# Export the shlibpath_var.
++	eval "export $shlibpath_var"
++      fi
++
++      # Restore saved environment variables
++      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
++      do
++	eval "if test \"\${save_$lt_var+set}\" = set; then
++                $lt_var=\$save_$lt_var; export $lt_var
++	      else
++		$lt_unset $lt_var
++	      fi"
++      done
++
++      # Now prepare to actually exec the command.
++      exec_cmd="\$cmd$args"
++    else
++      # Display what would be done.
++      if test -n "$shlibpath_var"; then
++	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
++	echo "export $shlibpath_var"
++      fi
++      $ECHO "$cmd$args"
++      exit $EXIT_SUCCESS
++    fi
++}
++
++test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
++
++
++# func_mode_finish arg...
++func_mode_finish ()
++{
++    $opt_debug
++    libs=
++    libdirs=
++    admincmds=
++
++    for opt in "$nonopt" ${1+"$@"}
++    do
++      if test -d "$opt"; then
++	func_append libdirs " $opt"
++
++      elif test -f "$opt"; then
++	if func_lalib_unsafe_p "$opt"; then
++	  func_append libs " $opt"
++	else
++	  func_warning "\`$opt' is not a valid libtool archive"
++	fi
++
++      else
++	func_fatal_error "invalid argument \`$opt'"
++      fi
++    done
++
++    if test -n "$libs"; then
++      if test -n "$lt_sysroot"; then
++        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
++        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
++      else
++        sysroot_cmd=
++      fi
++
++      # Remove sysroot references
++      if $opt_dry_run; then
++        for lib in $libs; do
++          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
++        done
++      else
++        tmpdir=`func_mktempdir`
++        for lib in $libs; do
++	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
++	    > $tmpdir/tmp-la
++	  mv -f $tmpdir/tmp-la $lib
++	done
++        ${RM}r "$tmpdir"
++      fi
++    fi
++
++    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
++      for libdir in $libdirs; do
++	if test -n "$finish_cmds"; then
++	  # Do each command in the finish commands.
++	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
++'"$cmd"'"'
++	fi
++	if test -n "$finish_eval"; then
++	  # Do the single finish_eval.
++	  eval cmds=\"$finish_eval\"
++	  $opt_dry_run || eval "$cmds" || func_append admincmds "
++       $cmds"
++	fi
++      done
++    fi
++
++    # Exit here if they wanted silent mode.
++    $opt_silent && exit $EXIT_SUCCESS
++
++    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
++      echo "----------------------------------------------------------------------"
++      echo "Libraries have been installed in:"
++      for libdir in $libdirs; do
++	$ECHO "   $libdir"
++      done
++      echo
++      echo "If you ever happen to want to link against installed libraries"
++      echo "in a given directory, LIBDIR, you must either use libtool, and"
++      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
++      echo "flag during linking and do at least one of the following:"
++      if test -n "$shlibpath_var"; then
++	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
++	echo "     during execution"
++      fi
++      if test -n "$runpath_var"; then
++	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
++	echo "     during linking"
++      fi
++      if test -n "$hardcode_libdir_flag_spec"; then
++	libdir=LIBDIR
++	eval flag=\"$hardcode_libdir_flag_spec\"
++
++	$ECHO "   - use the \`$flag' linker flag"
++      fi
++      if test -n "$admincmds"; then
++	$ECHO "   - have your system administrator run these commands:$admincmds"
++      fi
++      if test -f /etc/ld.so.conf; then
++	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
++      fi
++      echo
++
++      echo "See any operating system documentation about shared libraries for"
++      case $host in
++	solaris2.[6789]|solaris2.1[0-9])
++	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
++	  echo "pages."
++	  ;;
++	*)
++	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
++	  ;;
++      esac
++      echo "----------------------------------------------------------------------"
++    fi
++    exit $EXIT_SUCCESS
++}
++
++test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
++
++
++# func_mode_install arg...
++func_mode_install ()
++{
++    $opt_debug
++    # There may be an optional sh(1) argument at the beginning of
++    # install_prog (especially on Windows NT).
++    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
++       # Allow the use of GNU shtool's install command.
++       case $nonopt in *shtool*) :;; *) false;; esac; then
++      # Aesthetically quote it.
++      func_quote_for_eval "$nonopt"
++      install_prog="$func_quote_for_eval_result "
++      arg=$1
++      shift
++    else
++      install_prog=
++      arg=$nonopt
++    fi
++
++    # The real first argument should be the name of the installation program.
++    # Aesthetically quote it.
++    func_quote_for_eval "$arg"
++    func_append install_prog "$func_quote_for_eval_result"
++    install_shared_prog=$install_prog
++    case " $install_prog " in
++      *[\\\ /]cp\ *) install_cp=: ;;
++      *) install_cp=false ;;
++    esac
++
++    # We need to accept at least all the BSD install flags.
++    dest=
++    files=
++    opts=
++    prev=
++    install_type=
++    isdir=no
++    stripme=
++    no_mode=:
++    for arg
++    do
++      arg2=
++      if test -n "$dest"; then
++	func_append files " $dest"
++	dest=$arg
++	continue
++      fi
++
++      case $arg in
++      -d) isdir=yes ;;
++      -f)
++	if $install_cp; then :; else
++	  prev=$arg
++	fi
++	;;
++      -g | -m | -o)
++	prev=$arg
++	;;
++      -s)
++	stripme=" -s"
++	continue
++	;;
++      -*)
++	;;
++      *)
++	# If the previous option needed an argument, then skip it.
++	if test -n "$prev"; then
++	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
++	    arg2=$install_override_mode
++	    no_mode=false
++	  fi
++	  prev=
++	else
++	  dest=$arg
++	  continue
++	fi
++	;;
++      esac
++
++      # Aesthetically quote the argument.
++      func_quote_for_eval "$arg"
++      func_append install_prog " $func_quote_for_eval_result"
++      if test -n "$arg2"; then
++	func_quote_for_eval "$arg2"
++      fi
++      func_append install_shared_prog " $func_quote_for_eval_result"
++    done
++
++    test -z "$install_prog" && \
++      func_fatal_help "you must specify an install program"
++
++    test -n "$prev" && \
++      func_fatal_help "the \`$prev' option requires an argument"
++
++    if test -n "$install_override_mode" && $no_mode; then
++      if $install_cp; then :; else
++	func_quote_for_eval "$install_override_mode"
++	func_append install_shared_prog " -m $func_quote_for_eval_result"
++      fi
++    fi
++
++    if test -z "$files"; then
++      if test -z "$dest"; then
++	func_fatal_help "no file or destination specified"
++      else
++	func_fatal_help "you must specify a destination"
++      fi
++    fi
++
++    # Strip any trailing slash from the destination.
++    func_stripname '' '/' "$dest"
++    dest=$func_stripname_result
++
++    # Check to see that the destination is a directory.
++    test -d "$dest" && isdir=yes
++    if test "$isdir" = yes; then
++      destdir="$dest"
++      destname=
++    else
++      func_dirname_and_basename "$dest" "" "."
++      destdir="$func_dirname_result"
++      destname="$func_basename_result"
++
++      # Not a directory, so check to see that there is only one file specified.
++      set dummy $files; shift
++      test "$#" -gt 1 && \
++	func_fatal_help "\`$dest' is not a directory"
++    fi
++    case $destdir in
++    [\\/]* | [A-Za-z]:[\\/]*) ;;
++    *)
++      for file in $files; do
++	case $file in
++	*.lo) ;;
++	*)
++	  func_fatal_help "\`$destdir' must be an absolute directory name"
++	  ;;
++	esac
++      done
++      ;;
++    esac
++
++    # This variable tells wrapper scripts just to set variables rather
++    # than running their programs.
++    libtool_install_magic="$magic"
++
++    staticlibs=
++    future_libdirs=
++    current_libdirs=
++    for file in $files; do
++
++      # Do each installation.
++      case $file in
++      *.$libext)
++	# Do the static libraries later.
++	func_append staticlibs " $file"
++	;;
++
++      *.la)
++	func_resolve_sysroot "$file"
++	file=$func_resolve_sysroot_result
++
++	# Check to see that this really is a libtool archive.
++	func_lalib_unsafe_p "$file" \
++	  || func_fatal_help "\`$file' is not a valid libtool archive"
++
++	library_names=
++	old_library=
++	relink_command=
++	func_source "$file"
++
++	# Add the libdir to current_libdirs if it is the destination.
++	if test "X$destdir" = "X$libdir"; then
++	  case "$current_libdirs " in
++	  *" $libdir "*) ;;
++	  *) func_append current_libdirs " $libdir" ;;
++	  esac
++	else
++	  # Note the libdir as a future libdir.
++	  case "$future_libdirs " in
++	  *" $libdir "*) ;;
++	  *) func_append future_libdirs " $libdir" ;;
++	  esac
++	fi
++
++	func_dirname "$file" "/" ""
++	dir="$func_dirname_result"
++	func_append dir "$objdir"
++
++	if test -n "$relink_command"; then
++	  # Determine the prefix the user has applied to our future dir.
++	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
++
++	  # Don't allow the user to place us outside of our expected
++	  # location b/c this prevents finding dependent libraries that
++	  # are installed to the same prefix.
++	  # At present, this check doesn't affect windows .dll's that
++	  # are installed into $libdir/../bin (currently, that works fine)
++	  # but it's something to keep an eye on.
++	  test "$inst_prefix_dir" = "$destdir" && \
++	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
++
++	  if test -n "$inst_prefix_dir"; then
++	    # Stick the inst_prefix_dir data into the link command.
++	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
++	  else
++	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
++	  fi
++
++	  func_warning "relinking \`$file'"
++	  func_show_eval "$relink_command" \
++	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
++	fi
++
++	# See the names of the shared library.
++	set dummy $library_names; shift
++	if test -n "$1"; then
++	  realname="$1"
++	  shift
++
++	  srcname="$realname"
++	  test -n "$relink_command" && srcname="$realname"T
++
++	  # Install the shared library and build the symlinks.
++	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
++	      'exit $?'
++	  tstripme="$stripme"
++	  case $host_os in
++	  cygwin* | mingw* | pw32* | cegcc*)
++	    case $realname in
++	    *.dll.a)
++	      tstripme=""
++	      ;;
++	    esac
++	    ;;
++	  esac
++	  if test -n "$tstripme" && test -n "$striplib"; then
++	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
++	  fi
++
++	  if test "$#" -gt 0; then
++	    # Delete the old symlinks, and create new ones.
++	    # Try `ln -sf' first, because the `ln' binary might depend on
++	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
++	    # so we also need to try rm && ln -s.
++	    for linkname
++	    do
++	      test "$linkname" != "$realname" \
++		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
++	    done
++	  fi
++
++	  # Do each command in the postinstall commands.
++	  lib="$destdir/$realname"
++	  func_execute_cmds "$postinstall_cmds" 'exit $?'
++	fi
++
++	# Install the pseudo-library for information purposes.
++	func_basename "$file"
++	name="$func_basename_result"
++	instname="$dir/$name"i
++	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
++
++	# Maybe install the static library, too.
++	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
++	;;
++
++      *.lo)
++	# Install (i.e. copy) a libtool object.
++
++	# Figure out destination file name, if it wasn't already specified.
++	if test -n "$destname"; then
++	  destfile="$destdir/$destname"
++	else
++	  func_basename "$file"
++	  destfile="$func_basename_result"
++	  destfile="$destdir/$destfile"
++	fi
++
++	# Deduce the name of the destination old-style object file.
++	case $destfile in
++	*.lo)
++	  func_lo2o "$destfile"
++	  staticdest=$func_lo2o_result
++	  ;;
++	*.$objext)
++	  staticdest="$destfile"
++	  destfile=
++	  ;;
++	*)
++	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
++	  ;;
++	esac
++
++	# Install the libtool object if requested.
++	test -n "$destfile" && \
++	  func_show_eval "$install_prog $file $destfile" 'exit $?'
++
++	# Install the old object if enabled.
++	if test "$build_old_libs" = yes; then
++	  # Deduce the name of the old-style object file.
++	  func_lo2o "$file"
++	  staticobj=$func_lo2o_result
++	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
++	fi
++	exit $EXIT_SUCCESS
++	;;
++
++      *)
++	# Figure out destination file name, if it wasn't already specified.
++	if test -n "$destname"; then
++	  destfile="$destdir/$destname"
++	else
++	  func_basename "$file"
++	  destfile="$func_basename_result"
++	  destfile="$destdir/$destfile"
++	fi
++
++	# If the file is missing, and there is a .exe on the end, strip it
++	# because it is most likely a libtool script we actually want to
++	# install
++	stripped_ext=""
++	case $file in
++	  *.exe)
++	    if test ! -f "$file"; then
++	      func_stripname '' '.exe' "$file"
++	      file=$func_stripname_result
++	      stripped_ext=".exe"
++	    fi
++	    ;;
++	esac
++
++	# Do a test to see if this is really a libtool program.
++	case $host in
++	*cygwin* | *mingw*)
++	    if func_ltwrapper_executable_p "$file"; then
++	      func_ltwrapper_scriptname "$file"
++	      wrapper=$func_ltwrapper_scriptname_result
++	    else
++	      func_stripname '' '.exe' "$file"
++	      wrapper=$func_stripname_result
++	    fi
++	    ;;
++	*)
++	    wrapper=$file
++	    ;;
++	esac
++	if func_ltwrapper_script_p "$wrapper"; then
++	  notinst_deplibs=
++	  relink_command=
++
++	  func_source "$wrapper"
++
++	  # Check the variables that should have been set.
++	  test -z "$generated_by_libtool_version" && \
++	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
++
++	  finalize=yes
++	  for lib in $notinst_deplibs; do
++	    # Check to see that each library is installed.
++	    libdir=
++	    if test -f "$lib"; then
++	      func_source "$lib"
++	    fi
++	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
++	    if test -n "$libdir" && test ! -f "$libfile"; then
++	      func_warning "\`$lib' has not been installed in \`$libdir'"
++	      finalize=no
++	    fi
++	  done
++
++	  relink_command=
++	  func_source "$wrapper"
++
++	  outputname=
++	  if test "$fast_install" = no && test -n "$relink_command"; then
++	    $opt_dry_run || {
++	      if test "$finalize" = yes; then
++	        tmpdir=`func_mktempdir`
++		func_basename "$file$stripped_ext"
++		file="$func_basename_result"
++	        outputname="$tmpdir/$file"
++	        # Replace the output file specification.
++	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
++
++	        $opt_silent || {
++	          func_quote_for_expand "$relink_command"
++		  eval "func_echo $func_quote_for_expand_result"
++	        }
++	        if eval "$relink_command"; then :
++	          else
++		  func_error "error: relink \`$file' with the above command before installing it"
++		  $opt_dry_run || ${RM}r "$tmpdir"
++		  continue
++	        fi
++	        file="$outputname"
++	      else
++	        func_warning "cannot relink \`$file'"
++	      fi
++	    }
++	  else
++	    # Install the binary that we compiled earlier.
++	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
++	  fi
++	fi
++
++	# remove .exe since cygwin /usr/bin/install will append another
++	# one anyway
++	case $install_prog,$host in
++	*/usr/bin/install*,*cygwin*)
++	  case $file:$destfile in
++	  *.exe:*.exe)
++	    # this is ok
++	    ;;
++	  *.exe:*)
++	    destfile=$destfile.exe
++	    ;;
++	  *:*.exe)
++	    func_stripname '' '.exe' "$destfile"
++	    destfile=$func_stripname_result
++	    ;;
++	  esac
++	  ;;
++	esac
++	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
++	$opt_dry_run || if test -n "$outputname"; then
++	  ${RM}r "$tmpdir"
++	fi
++	;;
++      esac
++    done
++
++    for file in $staticlibs; do
++      func_basename "$file"
++      name="$func_basename_result"
++
++      # Set up the ranlib parameters.
++      oldlib="$destdir/$name"
++
++      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
++
++      if test -n "$stripme" && test -n "$old_striplib"; then
++	func_show_eval "$old_striplib $oldlib" 'exit $?'
++      fi
++
++      # Do each command in the postinstall commands.
++      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
++    done
++
++    test -n "$future_libdirs" && \
++      func_warning "remember to run \`$progname --finish$future_libdirs'"
++
++    if test -n "$current_libdirs"; then
++      # Maybe just do a dry run.
++      $opt_dry_run && current_libdirs=" -n$current_libdirs"
++      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
++    else
++      exit $EXIT_SUCCESS
++    fi
++}
++
++test "$opt_mode" = install && func_mode_install ${1+"$@"}
++
++
++# func_generate_dlsyms outputname originator pic_p
++# Extract symbols from dlprefiles and create ${outputname}S.o with
++# a dlpreopen symbol table.
++func_generate_dlsyms ()
++{
++    $opt_debug
++    my_outputname="$1"
++    my_originator="$2"
++    my_pic_p="${3-no}"
++    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
++    my_dlsyms=
++
++    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++      if test -n "$NM" && test -n "$global_symbol_pipe"; then
++	my_dlsyms="${my_outputname}S.c"
++      else
++	func_error "not configured to extract global symbols from dlpreopened files"
++      fi
++    fi
++
++    if test -n "$my_dlsyms"; then
++      case $my_dlsyms in
++      "") ;;
++      *.c)
++	# Discover the nlist of each of the dlfiles.
++	nlist="$output_objdir/${my_outputname}.nm"
++
++	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
++
++	# Parse the name list into a source file.
++	func_verbose "creating $output_objdir/$my_dlsyms"
++
++	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
++/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
++/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
++
++#ifdef __cplusplus
++extern \"C\" {
++#endif
++
++#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
++#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
++#endif
++
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++   relocations are performed -- see ld's documentation on pseudo-relocs.  */
++# define LT_DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data.  */
++# define LT_DLSYM_CONST
++#else
++# define LT_DLSYM_CONST const
++#endif
++
++/* External symbol declarations for the compiler. */\
++"
++
++	if test "$dlself" = yes; then
++	  func_verbose "generating symbol list for \`$output'"
++
++	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
++
++	  # Add our own program objects to the symbol list.
++	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
++	  for progfile in $progfiles; do
++	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
++	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
++	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
++	  done
++
++	  if test -n "$exclude_expsyms"; then
++	    $opt_dry_run || {
++	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
++	      eval '$MV "$nlist"T "$nlist"'
++	    }
++	  fi
++
++	  if test -n "$export_symbols_regex"; then
++	    $opt_dry_run || {
++	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
++	      eval '$MV "$nlist"T "$nlist"'
++	    }
++	  fi
++
++	  # Prepare the list of exported symbols
++	  if test -z "$export_symbols"; then
++	    export_symbols="$output_objdir/$outputname.exp"
++	    $opt_dry_run || {
++	      $RM $export_symbols
++	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
++	      case $host in
++	      *cygwin* | *mingw* | *cegcc* )
++                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
++                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
++	        ;;
++	      esac
++	    }
++	  else
++	    $opt_dry_run || {
++	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
++	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
++	      eval '$MV "$nlist"T "$nlist"'
++	      case $host in
++	        *cygwin* | *mingw* | *cegcc* )
++	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
++	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
++	          ;;
++	      esac
++	    }
++	  fi
++	fi
++
++	for dlprefile in $dlprefiles; do
++	  func_verbose "extracting global C symbols from \`$dlprefile'"
++	  func_basename "$dlprefile"
++	  name="$func_basename_result"
++          case $host in
++	    *cygwin* | *mingw* | *cegcc* )
++	      # if an import library, we need to obtain dlname
++	      if func_win32_import_lib_p "$dlprefile"; then
++	        func_tr_sh "$dlprefile"
++	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
++	        dlprefile_dlbasename=""
++	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
++	          # Use subshell, to avoid clobbering current variable values
++	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
++	          if test -n "$dlprefile_dlname" ; then
++	            func_basename "$dlprefile_dlname"
++	            dlprefile_dlbasename="$func_basename_result"
++	          else
++	            # no lafile. user explicitly requested -dlpreopen <import library>.
++	            $sharedlib_from_linklib_cmd "$dlprefile"
++	            dlprefile_dlbasename=$sharedlib_from_linklib_result
++	          fi
++	        fi
++	        $opt_dry_run || {
++	          if test -n "$dlprefile_dlbasename" ; then
++	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
++	          else
++	            func_warning "Could not compute DLL name from $name"
++	            eval '$ECHO ": $name " >> "$nlist"'
++	          fi
++	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
++	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
++	        }
++	      else # not an import lib
++	        $opt_dry_run || {
++	          eval '$ECHO ": $name " >> "$nlist"'
++	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
++	        }
++	      fi
++	    ;;
++	    *)
++	      $opt_dry_run || {
++	        eval '$ECHO ": $name " >> "$nlist"'
++	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
++	      }
++	    ;;
++          esac
++	done
++
++	$opt_dry_run || {
++	  # Make sure we have at least an empty file.
++	  test -f "$nlist" || : > "$nlist"
++
++	  if test -n "$exclude_expsyms"; then
++	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
++	    $MV "$nlist"T "$nlist"
++	  fi
++
++	  # Try sorting and uniquifying the output.
++	  if $GREP -v "^: " < "$nlist" |
++	      if sort -k 3 </dev/null >/dev/null 2>&1; then
++		sort -k 3
++	      else
++		sort +2
++	      fi |
++	      uniq > "$nlist"S; then
++	    :
++	  else
++	    $GREP -v "^: " < "$nlist" > "$nlist"S
++	  fi
++
++	  if test -f "$nlist"S; then
++	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
++	  else
++	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
++	  fi
++
++	  echo >> "$output_objdir/$my_dlsyms" "\
++
++/* The mapping between symbol names and symbols.  */
++typedef struct {
++  const char *name;
++  void *address;
++} lt_dlsymlist;
++extern LT_DLSYM_CONST lt_dlsymlist
++lt_${my_prefix}_LTX_preloaded_symbols[];
++LT_DLSYM_CONST lt_dlsymlist
++lt_${my_prefix}_LTX_preloaded_symbols[] =
++{\
++  { \"$my_originator\", (void *) 0 },"
++
++	  case $need_lib_prefix in
++	  no)
++	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
++	    ;;
++	  *)
++	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
++	    ;;
++	  esac
++	  echo >> "$output_objdir/$my_dlsyms" "\
++  {0, (void *) 0}
++};
++
++/* This works around a problem in FreeBSD linker */
++#ifdef FREEBSD_WORKAROUND
++static const void *lt_preloaded_setup() {
++  return lt_${my_prefix}_LTX_preloaded_symbols;
++}
++#endif
++
++#ifdef __cplusplus
++}
++#endif\
++"
++	} # !$opt_dry_run
++
++	pic_flag_for_symtable=
++	case "$compile_command " in
++	*" -static "*) ;;
++	*)
++	  case $host in
++	  # compiling the symbol table file with pic_flag works around
++	  # a FreeBSD bug that causes programs to crash when -lm is
++	  # linked before any other PIC object.  But we must not use
++	  # pic_flag when linking with -static.  The problem exists in
++	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
++	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
++	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
++	  *-*-hpux*)
++	    pic_flag_for_symtable=" $pic_flag"  ;;
++	  *)
++	    if test "X$my_pic_p" != Xno; then
++	      pic_flag_for_symtable=" $pic_flag"
++	    fi
++	    ;;
++	  esac
++	  ;;
++	esac
++	symtab_cflags=
++	for arg in $LTCFLAGS; do
++	  case $arg in
++	  -pie | -fpie | -fPIE) ;;
++	  *) func_append symtab_cflags " $arg" ;;
++	  esac
++	done
++
++	# Now compile the dynamic symbol file.
++	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
++
++	# Clean up the generated files.
++	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
++
++	# Transform the symbol file into the correct name.
++	symfileobj="$output_objdir/${my_outputname}S.$objext"
++	case $host in
++	*cygwin* | *mingw* | *cegcc* )
++	  if test -f "$output_objdir/$my_outputname.def"; then
++	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
++	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
++	  else
++	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
++	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
++	  fi
++	  ;;
++	*)
++	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
++	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
++	  ;;
++	esac
++	;;
++      *)
++	func_fatal_error "unknown suffix for \`$my_dlsyms'"
++	;;
++      esac
++    else
++      # We keep going just in case the user didn't refer to
++      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
++      # really was required.
++
++      # Nullify the symbol file.
++      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
++      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
++    fi
++}
++
++# func_win32_libid arg
++# return the library type of file 'arg'
++#
++# Need a lot of goo to handle *both* DLLs and import libs
++# Has to be a shell function in order to 'eat' the argument
++# that is supplied when $file_magic_command is called.
++# Despite the name, also deal with 64 bit binaries.
++func_win32_libid ()
++{
++  $opt_debug
++  win32_libid_type="unknown"
++  win32_fileres=`file -L $1 2>/dev/null`
++  case $win32_fileres in
++  *ar\ archive\ import\ library*) # definitely import
++    win32_libid_type="x86 archive import"
++    ;;
++  *ar\ archive*) # could be an import, or static
++    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
++    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
++       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
++      func_to_tool_file "$1" func_convert_file_msys_to_w32
++      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
++	$SED -n -e '
++	    1,100{
++		/ I /{
++		    s,.*,import,
++		    p
++		    q
++		}
++	    }'`
++      case $win32_nmres in
++      import*)  win32_libid_type="x86 archive import";;
++      *)        win32_libid_type="x86 archive static";;
++      esac
++    fi
++    ;;
++  *DLL*)
++    win32_libid_type="x86 DLL"
++    ;;
++  *executable*) # but shell scripts are "executable" too...
++    case $win32_fileres in
++    *MS\ Windows\ PE\ Intel*)
++      win32_libid_type="x86 DLL"
++      ;;
++    esac
++    ;;
++  esac
++  $ECHO "$win32_libid_type"
++}
++
++# func_cygming_dll_for_implib ARG
++#
++# Platform-specific function to extract the
++# name of the DLL associated with the specified
++# import library ARG.
++# Invoked by eval'ing the libtool variable
++#    $sharedlib_from_linklib_cmd
++# Result is available in the variable
++#    $sharedlib_from_linklib_result
++func_cygming_dll_for_implib ()
++{
++  $opt_debug
++  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
++}
++
++# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
++#
++# The is the core of a fallback implementation of a
++# platform-specific function to extract the name of the
++# DLL associated with the specified import library LIBNAME.
++#
++# SECTION_NAME is either .idata$6 or .idata$7, depending
++# on the platform and compiler that created the implib.
++#
++# Echos the name of the DLL associated with the
++# specified import library.
++func_cygming_dll_for_implib_fallback_core ()
++{
++  $opt_debug
++  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
++  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
++    $SED '/^Contents of section '"$match_literal"':/{
++      # Place marker at beginning of archive member dllname section
++      s/.*/====MARK====/
++      p
++      d
++    }
++    # These lines can sometimes be longer than 43 characters, but
++    # are always uninteresting
++    /:[	 ]*file format pe[i]\{,1\}-/d
++    /^In archive [^:]*:/d
++    # Ensure marker is printed
++    /^====MARK====/p
++    # Remove all lines with less than 43 characters
++    /^.\{43\}/!d
++    # From remaining lines, remove first 43 characters
++    s/^.\{43\}//' |
++    $SED -n '
++      # Join marker and all lines until next marker into a single line
++      /^====MARK====/ b para
++      H
++      $ b para
++      b
++      :para
++      x
++      s/\n//g
++      # Remove the marker
++      s/^====MARK====//
++      # Remove trailing dots and whitespace
++      s/[\. \t]*$//
++      # Print
++      /./p' |
++    # we now have a list, one entry per line, of the stringified
++    # contents of the appropriate section of all members of the
++    # archive which possess that section. Heuristic: eliminate
++    # all those which have a first or second character that is
++    # a '.' (that is, objdump's representation of an unprintable
++    # character.) This should work for all archives with less than
++    # 0x302f exports -- but will fail for DLLs whose name actually
++    # begins with a literal '.' or a single character followed by
++    # a '.'.
++    #
++    # Of those that remain, print the first one.
++    $SED -e '/^\./d;/^.\./d;q'
++}
++
++# func_cygming_gnu_implib_p ARG
++# This predicate returns with zero status (TRUE) if
++# ARG is a GNU/binutils-style import library. Returns
++# with nonzero status (FALSE) otherwise.
++func_cygming_gnu_implib_p ()
++{
++  $opt_debug
++  func_to_tool_file "$1" func_convert_file_msys_to_w32
++  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
++  test -n "$func_cygming_gnu_implib_tmp"
++}
++
++# func_cygming_ms_implib_p ARG
++# This predicate returns with zero status (TRUE) if
++# ARG is an MS-style import library. Returns
++# with nonzero status (FALSE) otherwise.
++func_cygming_ms_implib_p ()
++{
++  $opt_debug
++  func_to_tool_file "$1" func_convert_file_msys_to_w32
++  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
++  test -n "$func_cygming_ms_implib_tmp"
++}
++
++# func_cygming_dll_for_implib_fallback ARG
++# Platform-specific function to extract the
++# name of the DLL associated with the specified
++# import library ARG.
++#
++# This fallback implementation is for use when $DLLTOOL
++# does not support the --identify-strict option.
++# Invoked by eval'ing the libtool variable
++#    $sharedlib_from_linklib_cmd
++# Result is available in the variable
++#    $sharedlib_from_linklib_result
++func_cygming_dll_for_implib_fallback ()
++{
++  $opt_debug
++  if func_cygming_gnu_implib_p "$1" ; then
++    # binutils import library
++    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
++  elif func_cygming_ms_implib_p "$1" ; then
++    # ms-generated import library
++    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
++  else
++    # unknown
++    sharedlib_from_linklib_result=""
++  fi
++}
++
++
++# func_extract_an_archive dir oldlib
++func_extract_an_archive ()
++{
++    $opt_debug
++    f_ex_an_ar_dir="$1"; shift
++    f_ex_an_ar_oldlib="$1"
++    if test "$lock_old_archive_extraction" = yes; then
++      lockfile=$f_ex_an_ar_oldlib.lock
++      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
++	func_echo "Waiting for $lockfile to be removed"
++	sleep 2
++      done
++    fi
++    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
++		   'stat=$?; rm -f "$lockfile"; exit $stat'
++    if test "$lock_old_archive_extraction" = yes; then
++      $opt_dry_run || rm -f "$lockfile"
++    fi
++    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
++     :
++    else
++      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
++    fi
++}
++
++
++# func_extract_archives gentop oldlib ...
++func_extract_archives ()
++{
++    $opt_debug
++    my_gentop="$1"; shift
++    my_oldlibs=${1+"$@"}
++    my_oldobjs=""
++    my_xlib=""
++    my_xabs=""
++    my_xdir=""
++
++    for my_xlib in $my_oldlibs; do
++      # Extract the objects.
++      case $my_xlib in
++	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
++	*) my_xabs=`pwd`"/$my_xlib" ;;
++      esac
++      func_basename "$my_xlib"
++      my_xlib="$func_basename_result"
++      my_xlib_u=$my_xlib
++      while :; do
++        case " $extracted_archives " in
++	*" $my_xlib_u "*)
++	  func_arith $extracted_serial + 1
++	  extracted_serial=$func_arith_result
++	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
++	*) break ;;
++	esac
++      done
++      extracted_archives="$extracted_archives $my_xlib_u"
++      my_xdir="$my_gentop/$my_xlib_u"
++
++      func_mkdir_p "$my_xdir"
++
++      case $host in
++      *-darwin*)
++	func_verbose "Extracting $my_xabs"
++	# Do not bother doing anything if just a dry run
++	$opt_dry_run || {
++	  darwin_orig_dir=`pwd`
++	  cd $my_xdir || exit $?
++	  darwin_archive=$my_xabs
++	  darwin_curdir=`pwd`
++	  darwin_base_archive=`basename "$darwin_archive"`
++	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
++	  if test -n "$darwin_arches"; then
++	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
++	    darwin_arch=
++	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
++	    for darwin_arch in  $darwin_arches ; do
++	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
++	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
++	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
++	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
++	      cd "$darwin_curdir"
++	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
++	    done # $darwin_arches
++            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
++	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
++	    darwin_file=
++	    darwin_files=
++	    for darwin_file in $darwin_filelist; do
++	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
++	      $LIPO -create -output "$darwin_file" $darwin_files
++	    done # $darwin_filelist
++	    $RM -rf unfat-$$
++	    cd "$darwin_orig_dir"
++	  else
++	    cd $darwin_orig_dir
++	    func_extract_an_archive "$my_xdir" "$my_xabs"
++	  fi # $darwin_arches
++	} # !$opt_dry_run
++	;;
++      *)
++        func_extract_an_archive "$my_xdir" "$my_xabs"
++	;;
++      esac
++      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
++    done
++
++    func_extract_archives_result="$my_oldobjs"
++}
++
++
++# func_emit_wrapper [arg=no]
++#
++# Emit a libtool wrapper script on stdout.
++# Don't directly open a file because we may want to
++# incorporate the script contents within a cygwin/mingw
++# wrapper executable.  Must ONLY be called from within
++# func_mode_link because it depends on a number of variables
++# set therein.
++#
++# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
++# variable will take.  If 'yes', then the emitted script
++# will assume that the directory in which it is stored is
++# the $objdir directory.  This is a cygwin/mingw-specific
++# behavior.
++func_emit_wrapper ()
++{
++	func_emit_wrapper_arg1=${1-no}
++
++	$ECHO "\
++#! $SHELL
++
++# $output - temporary wrapper script for $objdir/$outputname
++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
++#
++# The $output program cannot be directly executed until all the libtool
++# libraries that it depends on are installed.
++#
++# This wrapper script should never be moved out of the build directory.
++# If it is, it will not operate correctly.
++
++# Sed substitution that helps us do robust quoting.  It backslashifies
++# metacharacters that are still active within double-quoted strings.
++sed_quote_subst='$sed_quote_subst'
++
++# Be Bourne compatible
++if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
++  emulate sh
++  NULLCMD=:
++  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
++  # is contrary to our usage.  Disable this feature.
++  alias -g '\${1+\"\$@\"}'='\"\$@\"'
++  setopt NO_GLOB_SUBST
++else
++  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
++fi
++BIN_SH=xpg4; export BIN_SH # for Tru64
++DUALCASE=1; export DUALCASE # for MKS sh
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++relink_command=\"$relink_command\"
++
++# This environment variable determines our operation mode.
++if test \"\$libtool_install_magic\" = \"$magic\"; then
++  # install mode needs the following variables:
++  generated_by_libtool_version='$macro_version'
++  notinst_deplibs='$notinst_deplibs'
++else
++  # When we are sourced in execute mode, \$file and \$ECHO are already set.
++  if test \"\$libtool_execute_magic\" != \"$magic\"; then
++    file=\"\$0\""
++
++    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
++    $ECHO "\
++
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++  eval 'cat <<_LTECHO_EOF
++\$1
++_LTECHO_EOF'
++}
++    ECHO=\"$qECHO\"
++  fi
++
++# Very basic option parsing. These options are (a) specific to
++# the libtool wrapper, (b) are identical between the wrapper
++# /script/ and the wrapper /executable/ which is used only on
++# windows platforms, and (c) all begin with the string "--lt-"
++# (application programs are unlikely to have options which match
++# this pattern).
++#
++# There are only two supported options: --lt-debug and
++# --lt-dump-script. There is, deliberately, no --lt-help.
++#
++# The first argument to this parsing function should be the
++# script's $0 value, followed by "$@".
++lt_option_debug=
++func_parse_lt_options ()
++{
++  lt_script_arg0=\$0
++  shift
++  for lt_opt
++  do
++    case \"\$lt_opt\" in
++    --lt-debug) lt_option_debug=1 ;;
++    --lt-dump-script)
++        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
++        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
++        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
++        cat \"\$lt_dump_D/\$lt_dump_F\"
++        exit 0
++      ;;
++    --lt-*)
++        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
++        exit 1
++      ;;
++    esac
++  done
++
++  # Print the debug banner immediately:
++  if test -n \"\$lt_option_debug\"; then
++    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
++  fi
++}
++
++# Used when --lt-debug. Prints its arguments to stdout
++# (redirection is the responsibility of the caller)
++func_lt_dump_args ()
++{
++  lt_dump_args_N=1;
++  for lt_arg
++  do
++    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
++    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
++  done
++}
++
++# Core function for launching the target application
++func_exec_program_core ()
++{
++"
++  case $host in
++  # Backslashes separate directories on plain windows
++  *-*-mingw | *-*-os2* | *-cegcc*)
++    $ECHO "\
++      if test -n \"\$lt_option_debug\"; then
++        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
++        func_lt_dump_args \${1+\"\$@\"} 1>&2
++      fi
++      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
++"
++    ;;
++
++  *)
++    $ECHO "\
++      if test -n \"\$lt_option_debug\"; then
++        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
++        func_lt_dump_args \${1+\"\$@\"} 1>&2
++      fi
++      exec \"\$progdir/\$program\" \${1+\"\$@\"}
++"
++    ;;
++  esac
++  $ECHO "\
++      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
++      exit 1
++}
++
++# A function to encapsulate launching the target application
++# Strips options in the --lt-* namespace from \$@ and
++# launches target application with the remaining arguments.
++func_exec_program ()
++{
++  for lt_wr_arg
++  do
++    case \$lt_wr_arg in
++    --lt-*) ;;
++    *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
++    esac
++    shift
++  done
++  func_exec_program_core \${1+\"\$@\"}
++}
++
++  # Parse options
++  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
++
++  # Find the directory that this script lives in.
++  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
++  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
++
++  # Follow symbolic links until we get to the real thisdir.
++  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
++  while test -n \"\$file\"; do
++    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
++
++    # If there was a directory component, then change thisdir.
++    if test \"x\$destdir\" != \"x\$file\"; then
++      case \"\$destdir\" in
++      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
++      *) thisdir=\"\$thisdir/\$destdir\" ;;
++      esac
++    fi
++
++    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
++    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
++  done
++
++  # Usually 'no', except on cygwin/mingw when embedded into
++  # the cwrapper.
++  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
++  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
++    # special case for '.'
++    if test \"\$thisdir\" = \".\"; then
++      thisdir=\`pwd\`
++    fi
++    # remove .libs from thisdir
++    case \"\$thisdir\" in
++    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
++    $objdir )   thisdir=. ;;
++    esac
++  fi
++
++  # Try to get the absolute directory name.
++  absdir=\`cd \"\$thisdir\" && pwd\`
++  test -n \"\$absdir\" && thisdir=\"\$absdir\"
++"
++
++	if test "$fast_install" = yes; then
++	  $ECHO "\
++  program=lt-'$outputname'$exeext
++  progdir=\"\$thisdir/$objdir\"
++
++  if test ! -f \"\$progdir/\$program\" ||
++     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
++       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
++
++    file=\"\$\$-\$program\"
++
++    if test ! -d \"\$progdir\"; then
++      $MKDIR \"\$progdir\"
++    else
++      $RM \"\$progdir/\$file\"
++    fi"
++
++	  $ECHO "\
++
++    # relink executable if necessary
++    if test -n \"\$relink_command\"; then
++      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
++      else
++	$ECHO \"\$relink_command_output\" >&2
++	$RM \"\$progdir/\$file\"
++	exit 1
++      fi
++    fi
++
++    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
++    { $RM \"\$progdir/\$program\";
++      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
++    $RM \"\$progdir/\$file\"
++  fi"
++	else
++	  $ECHO "\
++  program='$outputname'
++  progdir=\"\$thisdir/$objdir\"
++"
++	fi
++
++	$ECHO "\
++
++  if test -f \"\$progdir/\$program\"; then"
++
++	# fixup the dll searchpath if we need to.
++	#
++	# Fix the DLL searchpath if we need to.  Do this before prepending
++	# to shlibpath, because on Windows, both are PATH and uninstalled
++	# libraries must come first.
++	if test -n "$dllsearchpath"; then
++	  $ECHO "\
++    # Add the dll search path components to the executable PATH
++    PATH=$dllsearchpath:\$PATH
++"
++	fi
++
++	# Export our shlibpath_var if we have one.
++	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
++	  $ECHO "\
++    # Add our own library path to $shlibpath_var
++    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
++
++    # Some systems cannot cope with colon-terminated $shlibpath_var
++    # The second colon is a workaround for a bug in BeOS R4 sed
++    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
++
++    export $shlibpath_var
++"
++	fi
++
++	$ECHO "\
++    if test \"\$libtool_execute_magic\" != \"$magic\"; then
++      # Run the actual program with our arguments.
++      func_exec_program \${1+\"\$@\"}
++    fi
++  else
++    # The program doesn't exist.
++    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
++    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
++    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
++    exit 1
++  fi
++fi\
++"
++}
++
++
++# func_emit_cwrapperexe_src
++# emit the source code for a wrapper executable on stdout
++# Must ONLY be called from within func_mode_link because
++# it depends on a number of variable set therein.
++func_emit_cwrapperexe_src ()
++{
++	cat <<EOF
++
++/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
++   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
++
++   The $output program cannot be directly executed until all the libtool
++   libraries that it depends on are installed.
++
++   This wrapper executable should never be moved out of the build directory.
++   If it is, it will not operate correctly.
++*/
++EOF
++	    cat <<"EOF"
++#ifdef _MSC_VER
++# define _CRT_SECURE_NO_DEPRECATE 1
++#endif
++#include <stdio.h>
++#include <stdlib.h>
++#ifdef _MSC_VER
++# include <direct.h>
++# include <process.h>
++# include <io.h>
++#else
++# include <unistd.h>
++# include <stdint.h>
++# ifdef __CYGWIN__
++#  include <io.h>
++# endif
++#endif
++#include <malloc.h>
++#include <stdarg.h>
++#include <assert.h>
++#include <string.h>
++#include <ctype.h>
++#include <errno.h>
++#include <fcntl.h>
++#include <sys/stat.h>
++
++/* declarations of non-ANSI functions */
++#if defined(__MINGW32__)
++# ifdef __STRICT_ANSI__
++int _putenv (const char *);
++# endif
++#elif defined(__CYGWIN__)
++# ifdef __STRICT_ANSI__
++char *realpath (const char *, char *);
++int putenv (char *);
++int setenv (const char *, const char *, int);
++# endif
++/* #elif defined (other platforms) ... */
++#endif
++
++/* portability defines, excluding path handling macros */
++#if defined(_MSC_VER)
++# define setmode _setmode
++# define stat    _stat
++# define chmod   _chmod
++# define getcwd  _getcwd
++# define putenv  _putenv
++# define S_IXUSR _S_IEXEC
++# ifndef _INTPTR_T_DEFINED
++#  define _INTPTR_T_DEFINED
++#  define intptr_t int
++# endif
++#elif defined(__MINGW32__)
++# define setmode _setmode
++# define stat    _stat
++# define chmod   _chmod
++# define getcwd  _getcwd
++# define putenv  _putenv
++#elif defined(__CYGWIN__)
++# define HAVE_SETENV
++# define FOPEN_WB "wb"
++/* #elif defined (other platforms) ... */
++#endif
++
++#if defined(PATH_MAX)
++# define LT_PATHMAX PATH_MAX
++#elif defined(MAXPATHLEN)
++# define LT_PATHMAX MAXPATHLEN
++#else
++# define LT_PATHMAX 1024
++#endif
++
++#ifndef S_IXOTH
++# define S_IXOTH 0
++#endif
++#ifndef S_IXGRP
++# define S_IXGRP 0
++#endif
++
++/* path handling portability macros */
++#ifndef DIR_SEPARATOR
++# define DIR_SEPARATOR '/'
++# define PATH_SEPARATOR ':'
++#endif
++
++#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
++  defined (__OS2__)
++# define HAVE_DOS_BASED_FILE_SYSTEM
++# define FOPEN_WB "wb"
++# ifndef DIR_SEPARATOR_2
++#  define DIR_SEPARATOR_2 '\\'
++# endif
++# ifndef PATH_SEPARATOR_2
++#  define PATH_SEPARATOR_2 ';'
++# endif
++#endif
++
++#ifndef DIR_SEPARATOR_2
++# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
++#else /* DIR_SEPARATOR_2 */
++# define IS_DIR_SEPARATOR(ch) \
++	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
++#endif /* DIR_SEPARATOR_2 */
++
++#ifndef PATH_SEPARATOR_2
++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
++#else /* PATH_SEPARATOR_2 */
++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
++#endif /* PATH_SEPARATOR_2 */
++
++#ifndef FOPEN_WB
++# define FOPEN_WB "w"
++#endif
++#ifndef _O_BINARY
++# define _O_BINARY 0
++#endif
++
++#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
++#define XFREE(stale) do { \
++  if (stale) { free ((void *) stale); stale = 0; } \
++} while (0)
++
++#if defined(LT_DEBUGWRAPPER)
++static int lt_debug = 1;
++#else
++static int lt_debug = 0;
++#endif
++
++const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
++
++void *xmalloc (size_t num);
++char *xstrdup (const char *string);
++const char *base_name (const char *name);
++char *find_executable (const char *wrapper);
++char *chase_symlinks (const char *pathspec);
++int make_executable (const char *path);
++int check_executable (const char *path);
++char *strendzap (char *str, const char *pat);
++void lt_debugprintf (const char *file, int line, const char *fmt, ...);
++void lt_fatal (const char *file, int line, const char *message, ...);
++static const char *nonnull (const char *s);
++static const char *nonempty (const char *s);
++void lt_setenv (const char *name, const char *value);
++char *lt_extend_str (const char *orig_value, const char *add, int to_end);
++void lt_update_exe_path (const char *name, const char *value);
++void lt_update_lib_path (const char *name, const char *value);
++char **prepare_spawn (char **argv);
++void lt_dump_script (FILE *f);
++EOF
++
++	    cat <<EOF
++volatile const char * MAGIC_EXE = "$magic_exe";
++const char * LIB_PATH_VARNAME = "$shlibpath_var";
++EOF
++
++	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
++              func_to_host_path "$temp_rpath"
++	      cat <<EOF
++const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
++EOF
++	    else
++	      cat <<"EOF"
++const char * LIB_PATH_VALUE   = "";
++EOF
++	    fi
++
++	    if test -n "$dllsearchpath"; then
++              func_to_host_path "$dllsearchpath:"
++	      cat <<EOF
++const char * EXE_PATH_VARNAME = "PATH";
++const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
++EOF
++	    else
++	      cat <<"EOF"
++const char * EXE_PATH_VARNAME = "";
++const char * EXE_PATH_VALUE   = "";
++EOF
++	    fi
++
++	    if test "$fast_install" = yes; then
++	      cat <<EOF
++const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
++EOF
++	    else
++	      cat <<EOF
++const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
++EOF
++	    fi
++
++
++	    cat <<"EOF"
++
++#define LTWRAPPER_OPTION_PREFIX         "--lt-"
++
++static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
++static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
++static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
++
++int
++main (int argc, char *argv[])
++{
++  char **newargz;
++  int  newargc;
++  char *tmp_pathspec;
++  char *actual_cwrapper_path;
++  char *actual_cwrapper_name;
++  char *target_name;
++  char *lt_argv_zero;
++  intptr_t rval = 127;
++
++  int i;
++
++  program_name = (char *) xstrdup (base_name (argv[0]));
++  newargz = XMALLOC (char *, argc + 1);
++
++  /* very simple arg parsing; don't want to rely on getopt
++   * also, copy all non cwrapper options to newargz, except
++   * argz[0], which is handled differently
++   */
++  newargc=0;
++  for (i = 1; i < argc; i++)
++    {
++      if (strcmp (argv[i], dumpscript_opt) == 0)
++	{
++EOF
++	    case "$host" in
++	      *mingw* | *cygwin* )
++		# make stdout use "unix" line endings
++		echo "          setmode(1,_O_BINARY);"
++		;;
++	      esac
++
++	    cat <<"EOF"
++	  lt_dump_script (stdout);
++	  return 0;
++	}
++      if (strcmp (argv[i], debug_opt) == 0)
++	{
++          lt_debug = 1;
++          continue;
++	}
++      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
++        {
++          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
++             namespace, but it is not one of the ones we know about and
++             have already dealt with, above (inluding dump-script), then
++             report an error. Otherwise, targets might begin to believe
++             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
++             namespace. The first time any user complains about this, we'll
++             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
++             or a configure.ac-settable value.
++           */
++          lt_fatal (__FILE__, __LINE__,
++		    "unrecognized %s option: '%s'",
++                    ltwrapper_option_prefix, argv[i]);
++        }
++      /* otherwise ... */
++      newargz[++newargc] = xstrdup (argv[i]);
++    }
++  newargz[++newargc] = NULL;
++
++EOF
++	    cat <<EOF
++  /* The GNU banner must be the first non-error debug message */
++  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
++EOF
++	    cat <<"EOF"
++  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
++  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
++
++  tmp_pathspec = find_executable (argv[0]);
++  if (tmp_pathspec == NULL)
++    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
++  lt_debugprintf (__FILE__, __LINE__,
++                  "(main) found exe (before symlink chase) at: %s\n",
++		  tmp_pathspec);
++
++  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
++  lt_debugprintf (__FILE__, __LINE__,
++                  "(main) found exe (after symlink chase) at: %s\n",
++		  actual_cwrapper_path);
++  XFREE (tmp_pathspec);
++
++  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
++  strendzap (actual_cwrapper_path, actual_cwrapper_name);
++
++  /* wrapper name transforms */
++  strendzap (actual_cwrapper_name, ".exe");
++  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
++  XFREE (actual_cwrapper_name);
++  actual_cwrapper_name = tmp_pathspec;
++  tmp_pathspec = 0;
++
++  /* target_name transforms -- use actual target program name; might have lt- prefix */
++  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
++  strendzap (target_name, ".exe");
++  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
++  XFREE (target_name);
++  target_name = tmp_pathspec;
++  tmp_pathspec = 0;
++
++  lt_debugprintf (__FILE__, __LINE__,
++		  "(main) libtool target name: %s\n",
++		  target_name);
++EOF
++
++	    cat <<EOF
++  newargz[0] =
++    XMALLOC (char, (strlen (actual_cwrapper_path) +
++		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
++  strcpy (newargz[0], actual_cwrapper_path);
++  strcat (newargz[0], "$objdir");
++  strcat (newargz[0], "/");
++EOF
++
++	    cat <<"EOF"
++  /* stop here, and copy so we don't have to do this twice */
++  tmp_pathspec = xstrdup (newargz[0]);
++
++  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
++  strcat (newargz[0], actual_cwrapper_name);
++
++  /* DO want the lt- prefix here if it exists, so use target_name */
++  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
++  XFREE (tmp_pathspec);
++  tmp_pathspec = NULL;
++EOF
++
++	    case $host_os in
++	      mingw*)
++	    cat <<"EOF"
++  {
++    char* p;
++    while ((p = strchr (newargz[0], '\\')) != NULL)
++      {
++	*p = '/';
++      }
++    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
++      {
++	*p = '/';
++      }
++  }
++EOF
++	    ;;
++	    esac
++
++	    cat <<"EOF"
++  XFREE (target_name);
++  XFREE (actual_cwrapper_path);
++  XFREE (actual_cwrapper_name);
++
++  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
++  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
++  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
++     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
++     because on Windows, both *_VARNAMEs are PATH but uninstalled
++     libraries must come first. */
++  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
++  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
++
++  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
++		  nonnull (lt_argv_zero));
++  for (i = 0; i < newargc; i++)
++    {
++      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
++		      i, nonnull (newargz[i]));
++    }
++
++EOF
++
++	    case $host_os in
++	      mingw*)
++		cat <<"EOF"
++  /* execv doesn't actually work on mingw as expected on unix */
++  newargz = prepare_spawn (newargz);
++  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
++  if (rval == -1)
++    {
++      /* failed to start process */
++      lt_debugprintf (__FILE__, __LINE__,
++		      "(main) failed to launch target \"%s\": %s\n",
++		      lt_argv_zero, nonnull (strerror (errno)));
++      return 127;
++    }
++  return rval;
++EOF
++		;;
++	      *)
++		cat <<"EOF"
++  execv (lt_argv_zero, newargz);
++  return rval; /* =127, but avoids unused variable warning */
++EOF
++		;;
++	    esac
++
++	    cat <<"EOF"
++}
++
++void *
++xmalloc (size_t num)
++{
++  void *p = (void *) malloc (num);
++  if (!p)
++    lt_fatal (__FILE__, __LINE__, "memory exhausted");
++
++  return p;
++}
++
++char *
++xstrdup (const char *string)
++{
++  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
++			  string) : NULL;
++}
++
++const char *
++base_name (const char *name)
++{
++  const char *base;
++
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++  /* Skip over the disk name in MSDOS pathnames. */
++  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
++    name += 2;
++#endif
++
++  for (base = name; *name; name++)
++    if (IS_DIR_SEPARATOR (*name))
++      base = name + 1;
++  return base;
++}
++
++int
++check_executable (const char *path)
++{
++  struct stat st;
++
++  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
++                  nonempty (path));
++  if ((!path) || (!*path))
++    return 0;
++
++  if ((stat (path, &st) >= 0)
++      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
++    return 1;
++  else
++    return 0;
++}
++
++int
++make_executable (const char *path)
++{
++  int rval = 0;
++  struct stat st;
++
++  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
++                  nonempty (path));
++  if ((!path) || (!*path))
++    return 0;
++
++  if (stat (path, &st) >= 0)
++    {
++      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
++    }
++  return rval;
++}
++
++/* Searches for the full path of the wrapper.  Returns
++   newly allocated full path name if found, NULL otherwise
++   Does not chase symlinks, even on platforms that support them.
++*/
++char *
++find_executable (const char *wrapper)
++{
++  int has_slash = 0;
++  const char *p;
++  const char *p_next;
++  /* static buffer for getcwd */
++  char tmp[LT_PATHMAX + 1];
++  int tmp_len;
++  char *concat_name;
++
++  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
++                  nonempty (wrapper));
++
++  if ((wrapper == NULL) || (*wrapper == '\0'))
++    return NULL;
++
++  /* Absolute path? */
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
++    {
++      concat_name = xstrdup (wrapper);
++      if (check_executable (concat_name))
++	return concat_name;
++      XFREE (concat_name);
++    }
++  else
++    {
++#endif
++      if (IS_DIR_SEPARATOR (wrapper[0]))
++	{
++	  concat_name = xstrdup (wrapper);
++	  if (check_executable (concat_name))
++	    return concat_name;
++	  XFREE (concat_name);
++	}
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++    }
++#endif
++
++  for (p = wrapper; *p; p++)
++    if (*p == '/')
++      {
++	has_slash = 1;
++	break;
++      }
++  if (!has_slash)
++    {
++      /* no slashes; search PATH */
++      const char *path = getenv ("PATH");
++      if (path != NULL)
++	{
++	  for (p = path; *p; p = p_next)
++	    {
++	      const char *q;
++	      size_t p_len;
++	      for (q = p; *q; q++)
++		if (IS_PATH_SEPARATOR (*q))
++		  break;
++	      p_len = q - p;
++	      p_next = (*q == '\0' ? q : q + 1);
++	      if (p_len == 0)
++		{
++		  /* empty path: current directory */
++		  if (getcwd (tmp, LT_PATHMAX) == NULL)
++		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
++                              nonnull (strerror (errno)));
++		  tmp_len = strlen (tmp);
++		  concat_name =
++		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
++		  memcpy (concat_name, tmp, tmp_len);
++		  concat_name[tmp_len] = '/';
++		  strcpy (concat_name + tmp_len + 1, wrapper);
++		}
++	      else
++		{
++		  concat_name =
++		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
++		  memcpy (concat_name, p, p_len);
++		  concat_name[p_len] = '/';
++		  strcpy (concat_name + p_len + 1, wrapper);
++		}
++	      if (check_executable (concat_name))
++		return concat_name;
++	      XFREE (concat_name);
++	    }
++	}
++      /* not found in PATH; assume curdir */
++    }
++  /* Relative path | not found in path: prepend cwd */
++  if (getcwd (tmp, LT_PATHMAX) == NULL)
++    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
++              nonnull (strerror (errno)));
++  tmp_len = strlen (tmp);
++  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
++  memcpy (concat_name, tmp, tmp_len);
++  concat_name[tmp_len] = '/';
++  strcpy (concat_name + tmp_len + 1, wrapper);
++
++  if (check_executable (concat_name))
++    return concat_name;
++  XFREE (concat_name);
++  return NULL;
++}
++
++char *
++chase_symlinks (const char *pathspec)
++{
++#ifndef S_ISLNK
++  return xstrdup (pathspec);
++#else
++  char buf[LT_PATHMAX];
++  struct stat s;
++  char *tmp_pathspec = xstrdup (pathspec);
++  char *p;
++  int has_symlinks = 0;
++  while (strlen (tmp_pathspec) && !has_symlinks)
++    {
++      lt_debugprintf (__FILE__, __LINE__,
++		      "checking path component for symlinks: %s\n",
++		      tmp_pathspec);
++      if (lstat (tmp_pathspec, &s) == 0)
++	{
++	  if (S_ISLNK (s.st_mode) != 0)
++	    {
++	      has_symlinks = 1;
++	      break;
++	    }
++
++	  /* search backwards for last DIR_SEPARATOR */
++	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
++	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
++	    p--;
++	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
++	    {
++	      /* no more DIR_SEPARATORS left */
++	      break;
++	    }
++	  *p = '\0';
++	}
++      else
++	{
++	  lt_fatal (__FILE__, __LINE__,
++		    "error accessing file \"%s\": %s",
++		    tmp_pathspec, nonnull (strerror (errno)));
++	}
++    }
++  XFREE (tmp_pathspec);
++
++  if (!has_symlinks)
++    {
++      return xstrdup (pathspec);
++    }
++
++  tmp_pathspec = realpath (pathspec, buf);
++  if (tmp_pathspec == 0)
++    {
++      lt_fatal (__FILE__, __LINE__,
++		"could not follow symlinks for %s", pathspec);
++    }
++  return xstrdup (tmp_pathspec);
++#endif
++}
++
++char *
++strendzap (char *str, const char *pat)
++{
++  size_t len, patlen;
++
++  assert (str != NULL);
++  assert (pat != NULL);
++
++  len = strlen (str);
++  patlen = strlen (pat);
++
++  if (patlen <= len)
++    {
++      str += len - patlen;
++      if (strcmp (str, pat) == 0)
++	*str = '\0';
++    }
++  return str;
++}
++
++void
++lt_debugprintf (const char *file, int line, const char *fmt, ...)
++{
++  va_list args;
++  if (lt_debug)
++    {
++      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
++      va_start (args, fmt);
++      (void) vfprintf (stderr, fmt, args);
++      va_end (args);
++    }
++}
++
++static void
++lt_error_core (int exit_status, const char *file,
++	       int line, const char *mode,
++	       const char *message, va_list ap)
++{
++  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
++  vfprintf (stderr, message, ap);
++  fprintf (stderr, ".\n");
++
++  if (exit_status >= 0)
++    exit (exit_status);
++}
++
++void
++lt_fatal (const char *file, int line, const char *message, ...)
++{
++  va_list ap;
++  va_start (ap, message);
++  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
++  va_end (ap);
++}
++
++static const char *
++nonnull (const char *s)
++{
++  return s ? s : "(null)";
++}
++
++static const char *
++nonempty (const char *s)
++{
++  return (s && !*s) ? "(empty)" : nonnull (s);
++}
++
++void
++lt_setenv (const char *name, const char *value)
++{
++  lt_debugprintf (__FILE__, __LINE__,
++		  "(lt_setenv) setting '%s' to '%s'\n",
++                  nonnull (name), nonnull (value));
++  {
++#ifdef HAVE_SETENV
++    /* always make a copy, for consistency with !HAVE_SETENV */
++    char *str = xstrdup (value);
++    setenv (name, str, 1);
++#else
++    int len = strlen (name) + 1 + strlen (value) + 1;
++    char *str = XMALLOC (char, len);
++    sprintf (str, "%s=%s", name, value);
++    if (putenv (str) != EXIT_SUCCESS)
++      {
++        XFREE (str);
++      }
++#endif
++  }
++}
++
++char *
++lt_extend_str (const char *orig_value, const char *add, int to_end)
++{
++  char *new_value;
++  if (orig_value && *orig_value)
++    {
++      int orig_value_len = strlen (orig_value);
++      int add_len = strlen (add);
++      new_value = XMALLOC (char, add_len + orig_value_len + 1);
++      if (to_end)
++        {
++          strcpy (new_value, orig_value);
++          strcpy (new_value + orig_value_len, add);
++        }
++      else
++        {
++          strcpy (new_value, add);
++          strcpy (new_value + add_len, orig_value);
++        }
++    }
++  else
++    {
++      new_value = xstrdup (add);
++    }
++  return new_value;
++}
++
++void
++lt_update_exe_path (const char *name, const char *value)
++{
++  lt_debugprintf (__FILE__, __LINE__,
++		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
++                  nonnull (name), nonnull (value));
++
++  if (name && *name && value && *value)
++    {
++      char *new_value = lt_extend_str (getenv (name), value, 0);
++      /* some systems can't cope with a ':'-terminated path #' */
++      int len = strlen (new_value);
++      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
++        {
++          new_value[len-1] = '\0';
++        }
++      lt_setenv (name, new_value);
++      XFREE (new_value);
++    }
++}
++
++void
++lt_update_lib_path (const char *name, const char *value)
++{
++  lt_debugprintf (__FILE__, __LINE__,
++		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
++                  nonnull (name), nonnull (value));
++
++  if (name && *name && value && *value)
++    {
++      char *new_value = lt_extend_str (getenv (name), value, 0);
++      lt_setenv (name, new_value);
++      XFREE (new_value);
++    }
++}
++
++EOF
++	    case $host_os in
++	      mingw*)
++		cat <<"EOF"
++
++/* Prepares an argument vector before calling spawn().
++   Note that spawn() does not by itself call the command interpreter
++     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
++      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
++         GetVersionEx(&v);
++         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
++      }) ? "cmd.exe" : "command.com").
++   Instead it simply concatenates the arguments, separated by ' ', and calls
++   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
++   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
++   special way:
++   - Space and tab are interpreted as delimiters. They are not treated as
++     delimiters if they are surrounded by double quotes: "...".
++   - Unescaped double quotes are removed from the input. Their only effect is
++     that within double quotes, space and tab are treated like normal
++     characters.
++   - Backslashes not followed by double quotes are not special.
++   - But 2*n+1 backslashes followed by a double quote become
++     n backslashes followed by a double quote (n >= 0):
++       \" -> "
++       \\\" -> \"
++       \\\\\" -> \\"
++ */
++#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
++#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
++char **
++prepare_spawn (char **argv)
++{
++  size_t argc;
++  char **new_argv;
++  size_t i;
++
++  /* Count number of arguments.  */
++  for (argc = 0; argv[argc] != NULL; argc++)
++    ;
++
++  /* Allocate new argument vector.  */
++  new_argv = XMALLOC (char *, argc + 1);
++
++  /* Put quoted arguments into the new argument vector.  */
++  for (i = 0; i < argc; i++)
++    {
++      const char *string = argv[i];
++
++      if (string[0] == '\0')
++	new_argv[i] = xstrdup ("\"\"");
++      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
++	{
++	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
++	  size_t length;
++	  unsigned int backslashes;
++	  const char *s;
++	  char *quoted_string;
++	  char *p;
++
++	  length = 0;
++	  backslashes = 0;
++	  if (quote_around)
++	    length++;
++	  for (s = string; *s != '\0'; s++)
++	    {
++	      char c = *s;
++	      if (c == '"')
++		length += backslashes + 1;
++	      length++;
++	      if (c == '\\')
++		backslashes++;
++	      else
++		backslashes = 0;
++	    }
++	  if (quote_around)
++	    length += backslashes + 1;
++
++	  quoted_string = XMALLOC (char, length + 1);
++
++	  p = quoted_string;
++	  backslashes = 0;
++	  if (quote_around)
++	    *p++ = '"';
++	  for (s = string; *s != '\0'; s++)
++	    {
++	      char c = *s;
++	      if (c == '"')
++		{
++		  unsigned int j;
++		  for (j = backslashes + 1; j > 0; j--)
++		    *p++ = '\\';
++		}
++	      *p++ = c;
++	      if (c == '\\')
++		backslashes++;
++	      else
++		backslashes = 0;
++	    }
++	  if (quote_around)
++	    {
++	      unsigned int j;
++	      for (j = backslashes; j > 0; j--)
++		*p++ = '\\';
++	      *p++ = '"';
++	    }
++	  *p = '\0';
++
++	  new_argv[i] = quoted_string;
++	}
++      else
++	new_argv[i] = (char *) string;
++    }
++  new_argv[argc] = NULL;
++
++  return new_argv;
++}
++EOF
++		;;
++	    esac
++
++            cat <<"EOF"
++void lt_dump_script (FILE* f)
++{
++EOF
++	    func_emit_wrapper yes |
++              $SED -e 's/\([\\"]\)/\\\1/g' \
++	           -e 's/^/  fputs ("/' -e 's/$/\\n", f);/'
++
++            cat <<"EOF"
++}
++EOF
++}
++# end: func_emit_cwrapperexe_src
++
++# func_win32_import_lib_p ARG
++# True if ARG is an import lib, as indicated by $file_magic_cmd
++func_win32_import_lib_p ()
++{
++    $opt_debug
++    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
++    *import*) : ;;
++    *) false ;;
++    esac
++}
++
++# func_mode_link arg...
++func_mode_link ()
++{
++    $opt_debug
++    case $host in
++    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
++      # It is impossible to link a dll without this setting, and
++      # we shouldn't force the makefile maintainer to figure out
++      # which system we are compiling for in order to pass an extra
++      # flag for every libtool invocation.
++      # allow_undefined=no
++
++      # FIXME: Unfortunately, there are problems with the above when trying
++      # to make a dll which has undefined symbols, in which case not
++      # even a static library is built.  For now, we need to specify
++      # -no-undefined on the libtool link line when we can be certain
++      # that all symbols are satisfied, otherwise we get a static library.
++      allow_undefined=yes
++      ;;
++    *)
++      allow_undefined=yes
++      ;;
++    esac
++    libtool_args=$nonopt
++    base_compile="$nonopt $@"
++    compile_command=$nonopt
++    finalize_command=$nonopt
++
++    compile_rpath=
++    finalize_rpath=
++    compile_shlibpath=
++    finalize_shlibpath=
++    convenience=
++    old_convenience=
++    deplibs=
++    old_deplibs=
++    compiler_flags=
++    linker_flags=
++    dllsearchpath=
++    lib_search_path=`pwd`
++    inst_prefix_dir=
++    new_inherited_linker_flags=
++
++    avoid_version=no
++    bindir=
++    dlfiles=
++    dlprefiles=
++    dlself=no
++    export_dynamic=no
++    export_symbols=
++    export_symbols_regex=
++    generated=
++    libobjs=
++    ltlibs=
++    module=no
++    no_install=no
++    objs=
++    non_pic_objects=
++    precious_files_regex=
++    prefer_static_libs=no
++    preload=no
++    prev=
++    prevarg=
++    release=
++    rpath=
++    xrpath=
++    perm_rpath=
++    temp_rpath=
++    thread_safe=no
++    vinfo=
++    vinfo_number=no
++    weak_libs=
++    single_module="${wl}-single_module"
++    func_infer_tag $base_compile
++
++    # We need to know -static, to get the right output filenames.
++    for arg
++    do
++      case $arg in
++      -shared)
++	test "$build_libtool_libs" != yes && \
++	  func_fatal_configuration "can not build a shared library"
++	build_old_libs=no
++	break
++	;;
++      -all-static | -static | -static-libtool-libs)
++	case $arg in
++	-all-static)
++	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
++	    func_warning "complete static linking is impossible in this configuration"
++	  fi
++	  if test -n "$link_static_flag"; then
++	    dlopen_self=$dlopen_self_static
++	  fi
++	  prefer_static_libs=yes
++	  ;;
++	-static)
++	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
++	    dlopen_self=$dlopen_self_static
++	  fi
++	  prefer_static_libs=built
++	  ;;
++	-static-libtool-libs)
++	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
++	    dlopen_self=$dlopen_self_static
++	  fi
++	  prefer_static_libs=yes
++	  ;;
++	esac
++	build_libtool_libs=no
++	build_old_libs=yes
++	break
++	;;
++      esac
++    done
++
++    # See if our shared archives depend on static archives.
++    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
++
++    # Go through the arguments, transforming them on the way.
++    while test "$#" -gt 0; do
++      arg="$1"
++      shift
++      func_quote_for_eval "$arg"
++      qarg=$func_quote_for_eval_unquoted_result
++      func_append libtool_args " $func_quote_for_eval_result"
++
++      # If the previous option needs an argument, assign it.
++      if test -n "$prev"; then
++	case $prev in
++	output)
++	  func_append compile_command " @OUTPUT@"
++	  func_append finalize_command " @OUTPUT@"
++	  ;;
++	esac
++
++	case $prev in
++	bindir)
++	  bindir="$arg"
++	  prev=
++	  continue
++	  ;;
++	dlfiles|dlprefiles)
++	  if test "$preload" = no; then
++	    # Add the symbol object into the linking commands.
++	    func_append compile_command " @SYMFILE@"
++	    func_append finalize_command " @SYMFILE@"
++	    preload=yes
++	  fi
++	  case $arg in
++	  *.la | *.lo) ;;  # We handle these cases below.
++	  force)
++	    if test "$dlself" = no; then
++	      dlself=needless
++	      export_dynamic=yes
++	    fi
++	    prev=
++	    continue
++	    ;;
++	  self)
++	    if test "$prev" = dlprefiles; then
++	      dlself=yes
++	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
++	      dlself=yes
++	    else
++	      dlself=needless
++	      export_dynamic=yes
++	    fi
++	    prev=
++	    continue
++	    ;;
++	  *)
++	    if test "$prev" = dlfiles; then
++	      func_append dlfiles " $arg"
++	    else
++	      func_append dlprefiles " $arg"
++	    fi
++	    prev=
++	    continue
++	    ;;
++	  esac
++	  ;;
++	expsyms)
++	  export_symbols="$arg"
++	  test -f "$arg" \
++	    || func_fatal_error "symbol file \`$arg' does not exist"
++	  prev=
++	  continue
++	  ;;
++	expsyms_regex)
++	  export_symbols_regex="$arg"
++	  prev=
++	  continue
++	  ;;
++	framework)
++	  case $host in
++	    *-*-darwin*)
++	      case "$deplibs " in
++		*" $qarg.ltframework "*) ;;
++		*) func_append deplibs " $qarg.ltframework" # this is fixed later
++		   ;;
++	      esac
++	      ;;
++	  esac
++	  prev=
++	  continue
++	  ;;
++	inst_prefix)
++	  inst_prefix_dir="$arg"
++	  prev=
++	  continue
++	  ;;
++	objectlist)
++	  if test -f "$arg"; then
++	    save_arg=$arg
++	    moreargs=
++	    for fil in `cat "$save_arg"`
++	    do
++#	      func_append moreargs " $fil"
++	      arg=$fil
++	      # A libtool-controlled object.
++
++	      # Check to see that this really is a libtool object.
++	      if func_lalib_unsafe_p "$arg"; then
++		pic_object=
++		non_pic_object=
++
++		# Read the .lo file
++		func_source "$arg"
++
++		if test -z "$pic_object" ||
++		   test -z "$non_pic_object" ||
++		   test "$pic_object" = none &&
++		   test "$non_pic_object" = none; then
++		  func_fatal_error "cannot find name of object for \`$arg'"
++		fi
++
++		# Extract subdirectory from the argument.
++		func_dirname "$arg" "/" ""
++		xdir="$func_dirname_result"
++
++		if test "$pic_object" != none; then
++		  # Prepend the subdirectory the object is found in.
++		  pic_object="$xdir$pic_object"
++
++		  if test "$prev" = dlfiles; then
++		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
++		      func_append dlfiles " $pic_object"
++		      prev=
++		      continue
++		    else
++		      # If libtool objects are unsupported, then we need to preload.
++		      prev=dlprefiles
++		    fi
++		  fi
++
++		  # CHECK ME:  I think I busted this.  -Ossama
++		  if test "$prev" = dlprefiles; then
++		    # Preload the old-style object.
++		    func_append dlprefiles " $pic_object"
++		    prev=
++		  fi
++
++		  # A PIC object.
++		  func_append libobjs " $pic_object"
++		  arg="$pic_object"
++		fi
++
++		# Non-PIC object.
++		if test "$non_pic_object" != none; then
++		  # Prepend the subdirectory the object is found in.
++		  non_pic_object="$xdir$non_pic_object"
++
++		  # A standard non-PIC object
++		  func_append non_pic_objects " $non_pic_object"
++		  if test -z "$pic_object" || test "$pic_object" = none ; then
++		    arg="$non_pic_object"
++		  fi
++		else
++		  # If the PIC object exists, use it instead.
++		  # $xdir was prepended to $pic_object above.
++		  non_pic_object="$pic_object"
++		  func_append non_pic_objects " $non_pic_object"
++		fi
++	      else
++		# Only an error if not doing a dry-run.
++		if $opt_dry_run; then
++		  # Extract subdirectory from the argument.
++		  func_dirname "$arg" "/" ""
++		  xdir="$func_dirname_result"
++
++		  func_lo2o "$arg"
++		  pic_object=$xdir$objdir/$func_lo2o_result
++		  non_pic_object=$xdir$func_lo2o_result
++		  func_append libobjs " $pic_object"
++		  func_append non_pic_objects " $non_pic_object"
++	        else
++		  func_fatal_error "\`$arg' is not a valid libtool object"
++		fi
++	      fi
++	    done
++	  else
++	    func_fatal_error "link input file \`$arg' does not exist"
++	  fi
++	  arg=$save_arg
++	  prev=
++	  continue
++	  ;;
++	precious_regex)
++	  precious_files_regex="$arg"
++	  prev=
++	  continue
++	  ;;
++	release)
++	  release="-$arg"
++	  prev=
++	  continue
++	  ;;
++	rpath | xrpath)
++	  # We need an absolute path.
++	  case $arg in
++	  [\\/]* | [A-Za-z]:[\\/]*) ;;
++	  *)
++	    func_fatal_error "only absolute run-paths are allowed"
++	    ;;
++	  esac
++	  if test "$prev" = rpath; then
++	    case "$rpath " in
++	    *" $arg "*) ;;
++	    *) func_append rpath " $arg" ;;
++	    esac
++	  else
++	    case "$xrpath " in
++	    *" $arg "*) ;;
++	    *) func_append xrpath " $arg" ;;
++	    esac
++	  fi
++	  prev=
++	  continue
++	  ;;
++	shrext)
++	  shrext_cmds="$arg"
++	  prev=
++	  continue
++	  ;;
++	weak)
++	  func_append weak_libs " $arg"
++	  prev=
++	  continue
++	  ;;
++	xcclinker)
++	  func_append linker_flags " $qarg"
++	  func_append compiler_flags " $qarg"
++	  prev=
++	  func_append compile_command " $qarg"
++	  func_append finalize_command " $qarg"
++	  continue
++	  ;;
++	xcompiler)
++	  func_append compiler_flags " $qarg"
++	  prev=
++	  func_append compile_command " $qarg"
++	  func_append finalize_command " $qarg"
++	  continue
++	  ;;
++	xlinker)
++	  func_append linker_flags " $qarg"
++	  func_append compiler_flags " $wl$qarg"
++	  prev=
++	  func_append compile_command " $wl$qarg"
++	  func_append finalize_command " $wl$qarg"
++	  continue
++	  ;;
++	*)
++	  eval "$prev=\"\$arg\""
++	  prev=
++	  continue
++	  ;;
++	esac
++      fi # test -n "$prev"
++
++      prevarg="$arg"
++
++      case $arg in
++      -all-static)
++	if test -n "$link_static_flag"; then
++	  # See comment for -static flag below, for more details.
++	  func_append compile_command " $link_static_flag"
++	  func_append finalize_command " $link_static_flag"
++	fi
++	continue
++	;;
++
++      -allow-undefined)
++	# FIXME: remove this flag sometime in the future.
++	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
++	;;
++
++      -avoid-version)
++	avoid_version=yes
++	continue
++	;;
++
++      -bindir)
++	prev=bindir
++	continue
++	;;
++
++      -dlopen)
++	prev=dlfiles
++	continue
++	;;
++
++      -dlpreopen)
++	prev=dlprefiles
++	continue
++	;;
++
++      -export-dynamic)
++	export_dynamic=yes
++	continue
++	;;
++
++      -export-symbols | -export-symbols-regex)
++	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
++	  func_fatal_error "more than one -exported-symbols argument is not allowed"
++	fi
++	if test "X$arg" = "X-export-symbols"; then
++	  prev=expsyms
++	else
++	  prev=expsyms_regex
++	fi
++	continue
++	;;
++
++      -framework)
++	prev=framework
++	continue
++	;;
++
++      -inst-prefix-dir)
++	prev=inst_prefix
++	continue
++	;;
++
++      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
++      # so, if we see these flags be careful not to treat them like -L
++      -L[A-Z][A-Z]*:*)
++	case $with_gcc/$host in
++	no/*-*-irix* | /*-*-irix*)
++	  func_append compile_command " $arg"
++	  func_append finalize_command " $arg"
++	  ;;
++	esac
++	continue
++	;;
++
++      -L*)
++	func_stripname "-L" '' "$arg"
++	if test -z "$func_stripname_result"; then
++	  if test "$#" -gt 0; then
++	    func_fatal_error "require no space between \`-L' and \`$1'"
++	  else
++	    func_fatal_error "need path for \`-L' option"
++	  fi
++	fi
++	func_resolve_sysroot "$func_stripname_result"
++	dir=$func_resolve_sysroot_result
++	# We need an absolute path.
++	case $dir in
++	[\\/]* | [A-Za-z]:[\\/]*) ;;
++	*)
++	  absdir=`cd "$dir" && pwd`
++	  test -z "$absdir" && \
++	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
++	  dir="$absdir"
++	  ;;
++	esac
++	case "$deplibs " in
++	*" -L$dir "* | *" $arg "*)
++	  # Will only happen for absolute or sysroot arguments
++	  ;;
++	*)
++	  # Preserve sysroot, but never include relative directories
++	  case $dir in
++	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
++	    *) func_append deplibs " -L$dir" ;;
++	  esac
++	  func_append lib_search_path " $dir"
++	  ;;
++	esac
++	case $host in
++	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
++	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
++	  case :$dllsearchpath: in
++	  *":$dir:"*) ;;
++	  ::) dllsearchpath=$dir;;
++	  *) func_append dllsearchpath ":$dir";;
++	  esac
++	  case :$dllsearchpath: in
++	  *":$testbindir:"*) ;;
++	  ::) dllsearchpath=$testbindir;;
++	  *) func_append dllsearchpath ":$testbindir";;
++	  esac
++	  ;;
++	esac
++	continue
++	;;
++
++      -l*)
++	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
++	  case $host in
++	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
++	    # These systems don't actually have a C or math library (as such)
++	    continue
++	    ;;
++	  *-*-os2*)
++	    # These systems don't actually have a C library (as such)
++	    test "X$arg" = "X-lc" && continue
++	    ;;
++	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
++	    # Do not include libc due to us having libc/libc_r.
++	    test "X$arg" = "X-lc" && continue
++	    ;;
++	  *-*-rhapsody* | *-*-darwin1.[012])
++	    # Rhapsody C and math libraries are in the System framework
++	    func_append deplibs " System.ltframework"
++	    continue
++	    ;;
++	  *-*-sco3.2v5* | *-*-sco5v6*)
++	    # Causes problems with __ctype
++	    test "X$arg" = "X-lc" && continue
++	    ;;
++	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
++	    # Compiler inserts libc in the correct place for threads to work
++	    test "X$arg" = "X-lc" && continue
++	    ;;
++	  esac
++	elif test "X$arg" = "X-lc_r"; then
++	 case $host in
++	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
++	   # Do not include libc_r directly, use -pthread flag.
++	   continue
++	   ;;
++	 esac
++	fi
++	func_append deplibs " $arg"
++	continue
++	;;
++
++      -module)
++	module=yes
++	continue
++	;;
++
++      # Tru64 UNIX uses -model [arg] to determine the layout of C++
++      # classes, name mangling, and exception handling.
++      # Darwin uses the -arch flag to determine output architecture.
++      -model|-arch|-isysroot|--sysroot)
++	func_append compiler_flags " $arg"
++	func_append compile_command " $arg"
++	func_append finalize_command " $arg"
++	prev=xcompiler
++	continue
++	;;
++
++      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
++	func_append compiler_flags " $arg"
++	func_append compile_command " $arg"
++	func_append finalize_command " $arg"
++	case "$new_inherited_linker_flags " in
++	    *" $arg "*) ;;
++	    * ) func_append new_inherited_linker_flags " $arg" ;;
++	esac
++	continue
++	;;
++
++      -multi_module)
++	single_module="${wl}-multi_module"
++	continue
++	;;
++
++      -no-fast-install)
++	fast_install=no
++	continue
++	;;
++
++      -no-install)
++	case $host in
++	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
++	  # The PATH hackery in wrapper scripts is required on Windows
++	  # and Darwin in order for the loader to find any dlls it needs.
++	  func_warning "\`-no-install' is ignored for $host"
++	  func_warning "assuming \`-no-fast-install' instead"
++	  fast_install=no
++	  ;;
++	*) no_install=yes ;;
++	esac
++	continue
++	;;
++
++      -no-undefined)
++	allow_undefined=no
++	continue
++	;;
++
++      -objectlist)
++	prev=objectlist
++	continue
++	;;
++
++      -o) prev=output ;;
++
++      -precious-files-regex)
++	prev=precious_regex
++	continue
++	;;
++
++      -release)
++	prev=release
++	continue
++	;;
++
++      -rpath)
++	prev=rpath
++	continue
++	;;
++
++      -R)
++	prev=xrpath
++	continue
++	;;
++
++      -R*)
++	func_stripname '-R' '' "$arg"
++	dir=$func_stripname_result
++	# We need an absolute path.
++	case $dir in
++	[\\/]* | [A-Za-z]:[\\/]*) ;;
++	=*)
++	  func_stripname '=' '' "$dir"
++	  dir=$lt_sysroot$func_stripname_result
++	  ;;
++	*)
++	  func_fatal_error "only absolute run-paths are allowed"
++	  ;;
++	esac
++	case "$xrpath " in
++	*" $dir "*) ;;
++	*) func_append xrpath " $dir" ;;
++	esac
++	continue
++	;;
++
++      -shared)
++	# The effects of -shared are defined in a previous loop.
++	continue
++	;;
++
++      -shrext)
++	prev=shrext
++	continue
++	;;
++
++      -static | -static-libtool-libs)
++	# The effects of -static are defined in a previous loop.
++	# We used to do the same as -all-static on platforms that
++	# didn't have a PIC flag, but the assumption that the effects
++	# would be equivalent was wrong.  It would break on at least
++	# Digital Unix and AIX.
++	continue
++	;;
++
++      -thread-safe)
++	thread_safe=yes
++	continue
++	;;
++
++      -version-info)
++	prev=vinfo
++	continue
++	;;
++
++      -version-number)
++	prev=vinfo
++	vinfo_number=yes
++	continue
++	;;
++
++      -weak)
++        prev=weak
++	continue
++	;;
++
++      -Wc,*)
++	func_stripname '-Wc,' '' "$arg"
++	args=$func_stripname_result
++	arg=
++	save_ifs="$IFS"; IFS=','
++	for flag in $args; do
++	  IFS="$save_ifs"
++          func_quote_for_eval "$flag"
++	  func_append arg " $func_quote_for_eval_result"
++	  func_append compiler_flags " $func_quote_for_eval_result"
++	done
++	IFS="$save_ifs"
++	func_stripname ' ' '' "$arg"
++	arg=$func_stripname_result
++	;;
++
++      -Wl,*)
++	func_stripname '-Wl,' '' "$arg"
++	args=$func_stripname_result
++	arg=
++	save_ifs="$IFS"; IFS=','
++	for flag in $args; do
++	  IFS="$save_ifs"
++          func_quote_for_eval "$flag"
++	  func_append arg " $wl$func_quote_for_eval_result"
++	  func_append compiler_flags " $wl$func_quote_for_eval_result"
++	  func_append linker_flags " $func_quote_for_eval_result"
++	done
++	IFS="$save_ifs"
++	func_stripname ' ' '' "$arg"
++	arg=$func_stripname_result
++	;;
++
++      -Xcompiler)
++	prev=xcompiler
++	continue
++	;;
++
++      -Xlinker)
++	prev=xlinker
++	continue
++	;;
++
++      -XCClinker)
++	prev=xcclinker
++	continue
++	;;
++
++      # -msg_* for osf cc
++      -msg_*)
++	func_quote_for_eval "$arg"
++	arg="$func_quote_for_eval_result"
++	;;
++
++      # Flags to be passed through unchanged, with rationale:
++      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
++      # -r[0-9][0-9]*        specify processor for the SGI compiler
++      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
++      # +DA*, +DD*           enable 64-bit mode for the HP compiler
++      # -q*                  compiler args for the IBM compiler
++      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
++      # -F/path              path to uninstalled frameworks, gcc on darwin
++      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
++      # @file                GCC response files
++      # -tp=*                Portland pgcc target processor selection
++      # --sysroot=*          for sysroot support
++      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
++      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
++      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
++      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
++        func_quote_for_eval "$arg"
++	arg="$func_quote_for_eval_result"
++        func_append compile_command " $arg"
++        func_append finalize_command " $arg"
++        func_append compiler_flags " $arg"
++        continue
++        ;;
++
++      # Some other compiler flag.
++      -* | +*)
++        func_quote_for_eval "$arg"
++	arg="$func_quote_for_eval_result"
++	;;
+ 
+-      if test -n "$rpath"; then
+-	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+-      fi
++      *.$objext)
++	# A standard object.
++	func_append objs " $arg"
++	;;
+ 
+-      if test -n "$xrpath"; then
+-	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+-      fi
++      *.lo)
++	# A libtool-controlled object.
+ 
+-      if test -n "$vinfo"; then
+-	$echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+-      fi
++	# Check to see that this really is a libtool object.
++	if func_lalib_unsafe_p "$arg"; then
++	  pic_object=
++	  non_pic_object=
++
++	  # Read the .lo file
++	  func_source "$arg"
++
++	  if test -z "$pic_object" ||
++	     test -z "$non_pic_object" ||
++	     test "$pic_object" = none &&
++	     test "$non_pic_object" = none; then
++	    func_fatal_error "cannot find name of object for \`$arg'"
++	  fi
++
++	  # Extract subdirectory from the argument.
++	  func_dirname "$arg" "/" ""
++	  xdir="$func_dirname_result"
++
++	  if test "$pic_object" != none; then
++	    # Prepend the subdirectory the object is found in.
++	    pic_object="$xdir$pic_object"
+ 
+-      if test -n "$release"; then
+-	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+-      fi
++	    if test "$prev" = dlfiles; then
++	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
++		func_append dlfiles " $pic_object"
++		prev=
++		continue
++	      else
++		# If libtool objects are unsupported, then we need to preload.
++		prev=dlprefiles
++	      fi
++	    fi
+ 
+-      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+-	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+-      fi
++	    # CHECK ME:  I think I busted this.  -Ossama
++	    if test "$prev" = dlprefiles; then
++	      # Preload the old-style object.
++	      func_append dlprefiles " $pic_object"
++	      prev=
++	    fi
+ 
+-      # Now set the variables for building old libraries.
+-      build_libtool_libs=no
+-      oldlibs="$output"
+-      objs="$objs$old_deplibs"
+-      ;;
++	    # A PIC object.
++	    func_append libobjs " $pic_object"
++	    arg="$pic_object"
++	  fi
+ 
+-    lib)
+-      # Make sure we only generate libraries of the form `libNAME.la'.
+-      case $outputname in
+-      lib*)
+-	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+-	eval libname=\"$libname_spec\"
+-	;;
+-      *)
+-	if test "$module" = no; then
+-	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+-	  $echo "$help" 1>&2
+-	  exit 1
+-	fi
+-	if test "$need_lib_prefix" != no; then
+-	  # Add the "lib" prefix for modules if required
+-	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+-	  eval libname=\"$libname_spec\"
++	  # Non-PIC object.
++	  if test "$non_pic_object" != none; then
++	    # Prepend the subdirectory the object is found in.
++	    non_pic_object="$xdir$non_pic_object"
++
++	    # A standard non-PIC object
++	    func_append non_pic_objects " $non_pic_object"
++	    if test -z "$pic_object" || test "$pic_object" = none ; then
++	      arg="$non_pic_object"
++	    fi
++	  else
++	    # If the PIC object exists, use it instead.
++	    # $xdir was prepended to $pic_object above.
++	    non_pic_object="$pic_object"
++	    func_append non_pic_objects " $non_pic_object"
++	  fi
+ 	else
+-	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
++	  # Only an error if not doing a dry-run.
++	  if $opt_dry_run; then
++	    # Extract subdirectory from the argument.
++	    func_dirname "$arg" "/" ""
++	    xdir="$func_dirname_result"
++
++	    func_lo2o "$arg"
++	    pic_object=$xdir$objdir/$func_lo2o_result
++	    non_pic_object=$xdir$func_lo2o_result
++	    func_append libobjs " $pic_object"
++	    func_append non_pic_objects " $non_pic_object"
++	  else
++	    func_fatal_error "\`$arg' is not a valid libtool object"
++	  fi
+ 	fi
+ 	;;
+-      esac
+ 
+-      if test -n "$objs"; then
+-	if test "$deplibs_check_method" != pass_all; then
+-	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+-	  exit 1
++      *.$libext)
++	# An archive.
++	func_append deplibs " $arg"
++	func_append old_deplibs " $arg"
++	continue
++	;;
++
++      *.la)
++	# A libtool-controlled library.
++
++	func_resolve_sysroot "$arg"
++	if test "$prev" = dlfiles; then
++	  # This library was specified with -dlopen.
++	  func_append dlfiles " $func_resolve_sysroot_result"
++	  prev=
++	elif test "$prev" = dlprefiles; then
++	  # The library was specified with -dlpreopen.
++	  func_append dlprefiles " $func_resolve_sysroot_result"
++	  prev=
+ 	else
+-	  echo
+-	  echo "*** Warning: Linking the shared library $output against the non-libtool"
+-	  echo "*** objects $objs is not portable!"
+-	  libobjs="$libobjs $objs"
++	  func_append deplibs " $func_resolve_sysroot_result"
+ 	fi
+-      fi
++	continue
++	;;
+ 
+-      if test "$dlself" != no; then
+-	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+-      fi
++      # Some other compiler argument.
++      *)
++	# Unknown arguments in both finalize_command and compile_command need
++	# to be aesthetically quoted because they are evaled later.
++	func_quote_for_eval "$arg"
++	arg="$func_quote_for_eval_result"
++	;;
++      esac # arg
+ 
+-      set dummy $rpath
+-      if test $# -gt 2; then
+-	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
++      # Now actually substitute the argument into the commands.
++      if test -n "$arg"; then
++	func_append compile_command " $arg"
++	func_append finalize_command " $arg"
+       fi
+-      install_libdir="$2"
++    done # argument parsing loop
+ 
+-      oldlibs=
+-      if test -z "$rpath"; then
+-	if test "$build_libtool_libs" = yes; then
+-	  # Building a libtool convenience library.
+-	  libext=al
+-	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+-	  build_libtool_libs=convenience
+-	  build_old_libs=yes
+-	fi
++    test -n "$prev" && \
++      func_fatal_help "the \`$prevarg' option requires an argument"
+ 
+-	if test -n "$vinfo"; then
+-	  $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+-	fi
++    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
++      eval arg=\"$export_dynamic_flag_spec\"
++      func_append compile_command " $arg"
++      func_append finalize_command " $arg"
++    fi
+ 
+-	if test -n "$release"; then
+-	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+-	fi
+-      else
++    oldlibs=
++    # calculate the name of the file, without its directory
++    func_basename "$output"
++    outputname="$func_basename_result"
++    libobjs_save="$libobjs"
+ 
+-	# Parse the version information argument.
+-	save_ifs="$IFS"; IFS=':'
+-	set dummy $vinfo 0 0 0
+-	IFS="$save_ifs"
++    if test -n "$shlibpath_var"; then
++      # get the directories listed in $shlibpath_var
++      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
++    else
++      shlib_search_path=
++    fi
++    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
++    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+ 
+-	if test -n "$8"; then
+-	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
+-	  $echo "$help" 1>&2
+-	  exit 1
+-	fi
++    func_dirname "$output" "/" ""
++    output_objdir="$func_dirname_result$objdir"
++    func_to_tool_file "$output_objdir/"
++    tool_output_objdir=$func_to_tool_file_result
++    # Create the object directory.
++    func_mkdir_p "$output_objdir"
++
++    # Determine the type of output
++    case $output in
++    "")
++      func_fatal_help "you must specify an output file"
++      ;;
++    *.$libext) linkmode=oldlib ;;
++    *.lo | *.$objext) linkmode=obj ;;
++    *.la) linkmode=lib ;;
++    *) linkmode=prog ;; # Anything else should be a program.
++    esac
+ 
+-	current="$2"
+-	revision="$3"
+-	age="$4"
++    specialdeplibs=
+ 
+-	# Check that each of the things are valid numbers.
+-	case $current in
+-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+-	*)
+-	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+-	  exit 1
++    libs=
++    # Find all interdependent deplibs by searching for libraries
++    # that are linked more than once (e.g. -la -lb -la)
++    for deplib in $deplibs; do
++      if $opt_preserve_dup_deps ; then
++	case "$libs " in
++	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
++	esac
++      fi
++      func_append libs " $deplib"
++    done
++
++    if test "$linkmode" = lib; then
++      libs="$predeps $libs $compiler_lib_search_path $postdeps"
++
++      # Compute libraries that are listed more than once in $predeps
++      # $postdeps and mark them as special (i.e., whose duplicates are
++      # not to be eliminated).
++      pre_post_deps=
++      if $opt_duplicate_compiler_generated_deps; then
++	for pre_post_dep in $predeps $postdeps; do
++	  case "$pre_post_deps " in
++	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
++	  esac
++	  func_append pre_post_deps " $pre_post_dep"
++	done
++      fi
++      pre_post_deps=
++    fi
++
++    deplibs=
++    newdependency_libs=
++    newlib_search_path=
++    need_relink=no # whether we're linking any uninstalled libtool libraries
++    notinst_deplibs= # not-installed libtool libraries
++    notinst_path= # paths that contain not-installed libtool libraries
++
++    case $linkmode in
++    lib)
++	passes="conv dlpreopen link"
++	for file in $dlfiles $dlprefiles; do
++	  case $file in
++	  *.la) ;;
++	  *)
++	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
++	    ;;
++	  esac
++	done
++	;;
++    prog)
++	compile_deplibs=
++	finalize_deplibs=
++	alldeplibs=no
++	newdlfiles=
++	newdlprefiles=
++	passes="conv scan dlopen dlpreopen link"
++	;;
++    *)  passes="conv"
++	;;
++    esac
++
++    for pass in $passes; do
++      # The preopen pass in lib mode reverses $deplibs; put it back here
++      # so that -L comes before libs that need it for instance...
++      if test "$linkmode,$pass" = "lib,link"; then
++	## FIXME: Find the place where the list is rebuilt in the wrong
++	##        order, and fix it there properly
++        tmp_deplibs=
++	for deplib in $deplibs; do
++	  tmp_deplibs="$deplib $tmp_deplibs"
++	done
++	deplibs="$tmp_deplibs"
++      fi
++
++      if test "$linkmode,$pass" = "lib,link" ||
++	 test "$linkmode,$pass" = "prog,scan"; then
++	libs="$deplibs"
++	deplibs=
++      fi
++      if test "$linkmode" = prog; then
++	case $pass in
++	dlopen) libs="$dlfiles" ;;
++	dlpreopen) libs="$dlprefiles" ;;
++	link)
++	  libs="$deplibs %DEPLIBS%"
++	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
+ 	  ;;
+ 	esac
++      fi
++      if test "$linkmode,$pass" = "lib,dlpreopen"; then
++	# Collect and forward deplibs of preopened libtool libs
++	for lib in $dlprefiles; do
++	  # Ignore non-libtool-libs
++	  dependency_libs=
++	  func_resolve_sysroot "$lib"
++	  case $lib in
++	  *.la)	func_source "$func_resolve_sysroot_result" ;;
++	  esac
+ 
+-	case $revision in
+-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+-	*)
+-	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+-	  exit 1
++	  # Collect preopened libtool deplibs, except any this library
++	  # has declared as weak libs
++	  for deplib in $dependency_libs; do
++	    func_basename "$deplib"
++            deplib_base=$func_basename_result
++	    case " $weak_libs " in
++	    *" $deplib_base "*) ;;
++	    *) func_append deplibs " $deplib" ;;
++	    esac
++	  done
++	done
++	libs="$dlprefiles"
++      fi
++      if test "$pass" = dlopen; then
++	# Collect dlpreopened libraries
++	save_deplibs="$deplibs"
++	deplibs=
++      fi
++
++      for deplib in $libs; do
++	lib=
++	found=no
++	case $deplib in
++	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
++	  if test "$linkmode,$pass" = "prog,link"; then
++	    compile_deplibs="$deplib $compile_deplibs"
++	    finalize_deplibs="$deplib $finalize_deplibs"
++	  else
++	    func_append compiler_flags " $deplib"
++	    if test "$linkmode" = lib ; then
++		case "$new_inherited_linker_flags " in
++		    *" $deplib "*) ;;
++		    * ) func_append new_inherited_linker_flags " $deplib" ;;
++		esac
++	    fi
++	  fi
++	  continue
++	  ;;
++	-l*)
++	  if test "$linkmode" != lib && test "$linkmode" != prog; then
++	    func_warning "\`-l' is ignored for archives/objects"
++	    continue
++	  fi
++	  func_stripname '-l' '' "$deplib"
++	  name=$func_stripname_result
++	  if test "$linkmode" = lib; then
++	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
++	  else
++	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
++	  fi
++	  for searchdir in $searchdirs; do
++	    for search_ext in .la $std_shrext .so .a; do
++	      # Search the libtool library
++	      lib="$searchdir/lib${name}${search_ext}"
++	      if test -f "$lib"; then
++		if test "$search_ext" = ".la"; then
++		  found=yes
++		else
++		  found=no
++		fi
++		break 2
++	      fi
++	    done
++	  done
++	  if test "$found" != yes; then
++	    # deplib doesn't seem to be a libtool library
++	    if test "$linkmode,$pass" = "prog,link"; then
++	      compile_deplibs="$deplib $compile_deplibs"
++	      finalize_deplibs="$deplib $finalize_deplibs"
++	    else
++	      deplibs="$deplib $deplibs"
++	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
++	    fi
++	    continue
++	  else # deplib is a libtool library
++	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
++	    # We need to do some special things here, and not later.
++	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++	      case " $predeps $postdeps " in
++	      *" $deplib "*)
++		if func_lalib_p "$lib"; then
++		  library_names=
++		  old_library=
++		  func_source "$lib"
++		  for l in $old_library $library_names; do
++		    ll="$l"
++		  done
++		  if test "X$ll" = "X$old_library" ; then # only static version available
++		    found=no
++		    func_dirname "$lib" "" "."
++		    ladir="$func_dirname_result"
++		    lib=$ladir/$old_library
++		    if test "$linkmode,$pass" = "prog,link"; then
++		      compile_deplibs="$deplib $compile_deplibs"
++		      finalize_deplibs="$deplib $finalize_deplibs"
++		    else
++		      deplibs="$deplib $deplibs"
++		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
++		    fi
++		    continue
++		  fi
++		fi
++		;;
++	      *) ;;
++	      esac
++	    fi
++	  fi
++	  ;; # -l
++	*.ltframework)
++	  if test "$linkmode,$pass" = "prog,link"; then
++	    compile_deplibs="$deplib $compile_deplibs"
++	    finalize_deplibs="$deplib $finalize_deplibs"
++	  else
++	    deplibs="$deplib $deplibs"
++	    if test "$linkmode" = lib ; then
++		case "$new_inherited_linker_flags " in
++		    *" $deplib "*) ;;
++		    * ) func_append new_inherited_linker_flags " $deplib" ;;
++		esac
++	    fi
++	  fi
++	  continue
++	  ;;
++	-L*)
++	  case $linkmode in
++	  lib)
++	    deplibs="$deplib $deplibs"
++	    test "$pass" = conv && continue
++	    newdependency_libs="$deplib $newdependency_libs"
++	    func_stripname '-L' '' "$deplib"
++	    func_resolve_sysroot "$func_stripname_result"
++	    func_append newlib_search_path " $func_resolve_sysroot_result"
++	    ;;
++	  prog)
++	    if test "$pass" = conv; then
++	      deplibs="$deplib $deplibs"
++	      continue
++	    fi
++	    if test "$pass" = scan; then
++	      deplibs="$deplib $deplibs"
++	    else
++	      compile_deplibs="$deplib $compile_deplibs"
++	      finalize_deplibs="$deplib $finalize_deplibs"
++	    fi
++	    func_stripname '-L' '' "$deplib"
++	    func_resolve_sysroot "$func_stripname_result"
++	    func_append newlib_search_path " $func_resolve_sysroot_result"
++	    ;;
++	  *)
++	    func_warning "\`-L' is ignored for archives/objects"
++	    ;;
++	  esac # linkmode
++	  continue
++	  ;; # -L
++	-R*)
++	  if test "$pass" = link; then
++	    func_stripname '-R' '' "$deplib"
++	    func_resolve_sysroot "$func_stripname_result"
++	    dir=$func_resolve_sysroot_result
++	    # Make sure the xrpath contains only unique directories.
++	    case "$xrpath " in
++	    *" $dir "*) ;;
++	    *) func_append xrpath " $dir" ;;
++	    esac
++	  fi
++	  deplibs="$deplib $deplibs"
++	  continue
++	  ;;
++	*.la)
++	  func_resolve_sysroot "$deplib"
++	  lib=$func_resolve_sysroot_result
++	  ;;
++	*.$libext)
++	  if test "$pass" = conv; then
++	    deplibs="$deplib $deplibs"
++	    continue
++	  fi
++	  case $linkmode in
++	  lib)
++	    # Linking convenience modules into shared libraries is allowed,
++	    # but linking other static libraries is non-portable.
++	    case " $dlpreconveniencelibs " in
++	    *" $deplib "*) ;;
++	    *)
++	      valid_a_lib=no
++	      case $deplibs_check_method in
++		match_pattern*)
++		  set dummy $deplibs_check_method; shift
++		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
++		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
++		    | $EGREP "$match_pattern_regex" > /dev/null; then
++		    valid_a_lib=yes
++		  fi
++		;;
++		pass_all)
++		  valid_a_lib=yes
++		;;
++	      esac
++	      if test "$valid_a_lib" != yes; then
++		echo
++		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
++		echo "*** I have the capability to make that library automatically link in when"
++		echo "*** you link to this library.  But I can only do this if you have a"
++		echo "*** shared version of the library, which you do not appear to have"
++		echo "*** because the file extensions .$libext of this argument makes me believe"
++		echo "*** that it is just a static archive that I should not use here."
++	      else
++		echo
++		$ECHO "*** Warning: Linking the shared library $output against the"
++		$ECHO "*** static library $deplib is not portable!"
++		deplibs="$deplib $deplibs"
++	      fi
++	      ;;
++	    esac
++	    continue
++	    ;;
++	  prog)
++	    if test "$pass" != link; then
++	      deplibs="$deplib $deplibs"
++	    else
++	      compile_deplibs="$deplib $compile_deplibs"
++	      finalize_deplibs="$deplib $finalize_deplibs"
++	    fi
++	    continue
++	    ;;
++	  esac # linkmode
++	  ;; # *.$libext
++	*.lo | *.$objext)
++	  if test "$pass" = conv; then
++	    deplibs="$deplib $deplibs"
++	  elif test "$linkmode" = prog; then
++	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
++	      # If there is no dlopen support or we're linking statically,
++	      # we need to preload.
++	      func_append newdlprefiles " $deplib"
++	      compile_deplibs="$deplib $compile_deplibs"
++	      finalize_deplibs="$deplib $finalize_deplibs"
++	    else
++	      func_append newdlfiles " $deplib"
++	    fi
++	  fi
++	  continue
+ 	  ;;
+-	esac
+-
+-	case $age in
+-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+-	*)
+-	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+-	  exit 1
++	%DEPLIBS%)
++	  alldeplibs=yes
++	  continue
+ 	  ;;
+-	esac
++	esac # case $deplib
+ 
+-	if test $age -gt $current; then
+-	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+-	  exit 1
++	if test "$found" = yes || test -f "$lib"; then :
++	else
++	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+ 	fi
+ 
+-	# Calculate the version variables.
+-	major=
+-	versuffix=
+-	verstring=
+-	case $version_type in
+-	none) ;;
++	# Check to see that this really is a libtool archive.
++	func_lalib_unsafe_p "$lib" \
++	  || func_fatal_error "\`$lib' is not a valid libtool archive"
+ 
+-	darwin)
+-	  # Like Linux, but with the current version available in
+-	  # verstring for coding it into the library header
+-	  major=.`expr $current - $age`
+-	  versuffix="$major.$age.$revision"
+-	  # Darwin ld doesn't like 0 for these options...
+-	  minor_current=`expr $current + 1`
+-	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+-	  ;;
++	func_dirname "$lib" "" "."
++	ladir="$func_dirname_result"
+ 
+-	freebsd-aout)
+-	  major=".$current"
+-	  versuffix=".$current.$revision";
+-	  ;;
++	dlname=
++	dlopen=
++	dlpreopen=
++	libdir=
++	library_names=
++	old_library=
++	inherited_linker_flags=
++	# If the library was installed with an old release of libtool,
++	# it will not redefine variables installed, or shouldnotlink
++	installed=yes
++	shouldnotlink=no
++	avoidtemprpath=
+ 
+-	freebsd-elf)
+-	  major=".$current"
+-	  versuffix=".$current";
+-	  ;;
+ 
+-	irix)
+-	  major=`expr $current - $age + 1`
+-	  verstring="sgi$major.$revision"
++	# Read the .la file
++	func_source "$lib"
+ 
+-	  # Add in all the interfaces that we are compatible with.
+-	  loop=$revision
+-	  while test $loop != 0; do
+-	    iface=`expr $revision - $loop`
+-	    loop=`expr $loop - 1`
+-	    verstring="sgi$major.$iface:$verstring"
++	# Convert "-framework foo" to "foo.ltframework"
++	if test -n "$inherited_linker_flags"; then
++	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
++	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
++	    case " $new_inherited_linker_flags " in
++	      *" $tmp_inherited_linker_flag "*) ;;
++	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
++	    esac
+ 	  done
++	fi
++	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	if test "$linkmode,$pass" = "lib,link" ||
++	   test "$linkmode,$pass" = "prog,scan" ||
++	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
++	  test -n "$dlopen" && func_append dlfiles " $dlopen"
++	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
++	fi
+ 
+-	  # Before this point, $major must not contain `.'.
+-	  major=.$major
+-	  versuffix="$major.$revision"
+-	  ;;
+-
+-	linux)
+-	  major=.`expr $current - $age`
+-	  versuffix="$major.$age.$revision"
+-	  ;;
++	if test "$pass" = conv; then
++	  # Only check for convenience libraries
++	  deplibs="$lib $deplibs"
++	  if test -z "$libdir"; then
++	    if test -z "$old_library"; then
++	      func_fatal_error "cannot find name of link library for \`$lib'"
++	    fi
++	    # It is a libtool convenience library, so add in its objects.
++	    func_append convenience " $ladir/$objdir/$old_library"
++	    func_append old_convenience " $ladir/$objdir/$old_library"
++	    tmp_libs=
++	    for deplib in $dependency_libs; do
++	      deplibs="$deplib $deplibs"
++	      if $opt_preserve_dup_deps ; then
++		case "$tmp_libs " in
++		*" $deplib "*) func_append specialdeplibs " $deplib" ;;
++		esac
++	      fi
++	      func_append tmp_libs " $deplib"
++	    done
++	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
++	    func_fatal_error "\`$lib' is not a convenience library"
++	  fi
++	  continue
++	fi # $pass = conv
+ 
+-	osf)
+-	  major=`expr $current - $age`
+-	  versuffix=".$current.$age.$revision"
+-	  verstring="$current.$age.$revision"
+ 
+-	  # Add in all the interfaces that we are compatible with.
+-	  loop=$age
+-	  while test $loop != 0; do
+-	    iface=`expr $current - $loop`
+-	    loop=`expr $loop - 1`
+-	    verstring="$verstring:${iface}.0"
++	# Get the name of the library we link against.
++	linklib=
++	if test -n "$old_library" &&
++	   { test "$prefer_static_libs" = yes ||
++	     test "$prefer_static_libs,$installed" = "built,no"; }; then
++	  linklib=$old_library
++	else
++	  for l in $old_library $library_names; do
++	    linklib="$l"
+ 	  done
++	fi
++	if test -z "$linklib"; then
++	  func_fatal_error "cannot find name of link library for \`$lib'"
++	fi
+ 
+-	  # Make executables depend on our current version.
+-	  verstring="$verstring:${current}.0"
+-	  ;;
+-
+-	sunos)
+-	  major=".$current"
+-	  versuffix=".$current.$revision"
+-	  ;;
+-
+-	windows)
+-	  # Use '-' rather than '.', since we only want one
+-	  # extension on DOS 8.3 filesystems.
+-	  major=`expr $current - $age`
+-	  versuffix="-$major"
+-	  ;;
++	# This library was specified with -dlopen.
++	if test "$pass" = dlopen; then
++	  if test -z "$libdir"; then
++	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
++	  fi
++	  if test -z "$dlname" ||
++	     test "$dlopen_support" != yes ||
++	     test "$build_libtool_libs" = no; then
++	    # If there is no dlname, no dlopen support or we're linking
++	    # statically, we need to preload.  We also need to preload any
++	    # dependent libraries so libltdl's deplib preloader doesn't
++	    # bomb out in the load deplibs phase.
++	    func_append dlprefiles " $lib $dependency_libs"
++	  else
++	    func_append newdlfiles " $lib"
++	  fi
++	  continue
++	fi # $pass = dlopen
+ 
++	# We need an absolute path.
++	case $ladir in
++	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ 	*)
+-	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
+-	  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+-	  exit 1
++	  abs_ladir=`cd "$ladir" && pwd`
++	  if test -z "$abs_ladir"; then
++	    func_warning "cannot determine absolute directory name of \`$ladir'"
++	    func_warning "passing it literally to the linker, although it might fail"
++	    abs_ladir="$ladir"
++	  fi
+ 	  ;;
+ 	esac
++	func_basename "$lib"
++	laname="$func_basename_result"
+ 
+-	# Clear the version info if we defaulted, and they specified a release.
+-	if test -z "$vinfo" && test -n "$release"; then
+-	  major=
+-	  verstring="0.0"
+-	  case $version_type in
+-	  darwin)
+-	    # we can't check for "0.0" in archive_cmds due to quoting
+-	    # problems, so we reset it completely
+-	    verstring=""
++	# Find the relevant object directory and library name.
++	if test "X$installed" = Xyes; then
++	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
++	    func_warning "library \`$lib' was moved."
++	    dir="$ladir"
++	    absdir="$abs_ladir"
++	    libdir="$abs_ladir"
++	  else
++	    dir="$lt_sysroot$libdir"
++	    absdir="$lt_sysroot$libdir"
++	  fi
++	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
++	else
++	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
++	    dir="$ladir"
++	    absdir="$abs_ladir"
++	    # Remove this search path later
++	    func_append notinst_path " $abs_ladir"
++	  else
++	    dir="$ladir/$objdir"
++	    absdir="$abs_ladir/$objdir"
++	    # Remove this search path later
++	    func_append notinst_path " $abs_ladir"
++	  fi
++	fi # $installed = yes
++	func_stripname 'lib' '.la' "$laname"
++	name=$func_stripname_result
++
++	# This library was specified with -dlpreopen.
++	if test "$pass" = dlpreopen; then
++	  if test -z "$libdir" && test "$linkmode" = prog; then
++	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
++	  fi
++	  case "$host" in
++	    # special handling for platforms with PE-DLLs.
++	    *cygwin* | *mingw* | *cegcc* )
++	      # Linker will automatically link against shared library if both
++	      # static and shared are present.  Therefore, ensure we extract
++	      # symbols from the import library if a shared library is present
++	      # (otherwise, the dlopen module name will be incorrect).  We do
++	      # this by putting the import library name into $newdlprefiles.
++	      # We recover the dlopen module name by 'saving' the la file
++	      # name in a special purpose variable, and (later) extracting the
++	      # dlname from the la file.
++	      if test -n "$dlname"; then
++	        func_tr_sh "$dir/$linklib"
++	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
++	        func_append newdlprefiles " $dir/$linklib"
++	      else
++	        func_append newdlprefiles " $dir/$old_library"
++	        # Keep a list of preopened convenience libraries to check
++	        # that they are being used correctly in the link pass.
++	        test -z "$libdir" && \
++	          func_append dlpreconveniencelibs " $dir/$old_library"
++	      fi
+ 	    ;;
+-	  *)
+-	    verstring="0.0"
++	    * )
++	      # Prefer using a static library (so that no silly _DYNAMIC symbols
++	      # are required to link).
++	      if test -n "$old_library"; then
++	        func_append newdlprefiles " $dir/$old_library"
++	        # Keep a list of preopened convenience libraries to check
++	        # that they are being used correctly in the link pass.
++	        test -z "$libdir" && \
++	          func_append dlpreconveniencelibs " $dir/$old_library"
++	      # Otherwise, use the dlname, so that lt_dlopen finds it.
++	      elif test -n "$dlname"; then
++	        func_append newdlprefiles " $dir/$dlname"
++	      else
++	        func_append newdlprefiles " $dir/$linklib"
++	      fi
+ 	    ;;
+ 	  esac
+-	  if test "$need_version" = no; then
+-	    versuffix=
++	fi # $pass = dlpreopen
++
++	if test -z "$libdir"; then
++	  # Link the convenience library
++	  if test "$linkmode" = lib; then
++	    deplibs="$dir/$old_library $deplibs"
++	  elif test "$linkmode,$pass" = "prog,link"; then
++	    compile_deplibs="$dir/$old_library $compile_deplibs"
++	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ 	  else
+-	    versuffix=".0.0"
++	    deplibs="$lib $deplibs" # used for prog,scan pass
+ 	  fi
++	  continue
+ 	fi
+ 
+-	# Remove version info from name if versioning should be avoided
+-	if test "$avoid_version" = yes && test "$need_version" = no; then
+-	  major=
+-	  versuffix=
+-	  verstring=""
+-	fi
+ 
+-	# Check to see if the archive will have undefined symbols.
+-	if test "$allow_undefined" = yes; then
+-	  if test "$allow_undefined_flag" = unsupported; then
+-	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+-	    build_libtool_libs=no
+-	    build_old_libs=yes
+-	  fi
+-	else
+-	  # Don't allow undefined symbols.
+-	  allow_undefined_flag="$no_undefined_flag"
+-	fi
+-      fi
++	if test "$linkmode" = prog && test "$pass" != link; then
++	  func_append newlib_search_path " $ladir"
++	  deplibs="$lib $deplibs"
+ 
+-      if test "$mode" != relink; then
+-	# Remove our outputs.
+-	$show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
+-	$run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
+-      fi
++	  linkalldeplibs=no
++	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
++	     test "$build_libtool_libs" = no; then
++	    linkalldeplibs=yes
++	  fi
+ 
+-      # Now set the variables for building old libraries.
+-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+-	oldlibs="$oldlibs $output_objdir/$libname.$libext"
++	  tmp_libs=
++	  for deplib in $dependency_libs; do
++	    case $deplib in
++	    -L*) func_stripname '-L' '' "$deplib"
++	         func_resolve_sysroot "$func_stripname_result"
++	         func_append newlib_search_path " $func_resolve_sysroot_result"
++		 ;;
++	    esac
++	    # Need to link against all dependency_libs?
++	    if test "$linkalldeplibs" = yes; then
++	      deplibs="$deplib $deplibs"
++	    else
++	      # Need to hardcode shared library paths
++	      # or/and link against static libraries
++	      newdependency_libs="$deplib $newdependency_libs"
++	    fi
++	    if $opt_preserve_dup_deps ; then
++	      case "$tmp_libs " in
++	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
++	      esac
++	    fi
++	    func_append tmp_libs " $deplib"
++	  done # for deplib
++	  continue
++	fi # $linkmode = prog...
+ 
+-	# Transform .lo files to .o files.
+-	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+-      fi
++	if test "$linkmode,$pass" = "prog,link"; then
++	  if test -n "$library_names" &&
++	     { { test "$prefer_static_libs" = no ||
++	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
++	       test -z "$old_library"; }; then
++	    # We need to hardcode the library path
++	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
++	      # Make sure the rpath contains only unique directories.
++	      case "$temp_rpath:" in
++	      *"$absdir:"*) ;;
++	      *) func_append temp_rpath "$absdir:" ;;
++	      esac
++	    fi
+ 
+-      # Eliminate all temporary directories.
+-      for path in $notinst_path; do
+-	lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
+-	deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
+-	dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'`
+-      done
++	    # Hardcode the library path.
++	    # Skip directories that are in the system default run-time
++	    # search path.
++	    case " $sys_lib_dlsearch_path " in
++	    *" $absdir "*) ;;
++	    *)
++	      case "$compile_rpath " in
++	      *" $absdir "*) ;;
++	      *) func_append compile_rpath " $absdir" ;;
++	      esac
++	      ;;
++	    esac
++	    case " $sys_lib_dlsearch_path " in
++	    *" $libdir "*) ;;
++	    *)
++	      case "$finalize_rpath " in
++	      *" $libdir "*) ;;
++	      *) func_append finalize_rpath " $libdir" ;;
++	      esac
++	      ;;
++	    esac
++	  fi # $linkmode,$pass = prog,link...
+ 
+-      if test -n "$xrpath"; then
+-	# If the user specified any rpath flags, then add them.
+-	temp_xrpath=
+-	for libdir in $xrpath; do
+-	  temp_xrpath="$temp_xrpath -R$libdir"
+-	  case "$finalize_rpath " in
+-	  *" $libdir "*) ;;
+-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+-	  esac
+-	done
+-	if test $hardcode_into_libs != yes || test $build_old_libs = yes; then
+-	  dependency_libs="$temp_xrpath $dependency_libs"
++	  if test "$alldeplibs" = yes &&
++	     { test "$deplibs_check_method" = pass_all ||
++	       { test "$build_libtool_libs" = yes &&
++		 test -n "$library_names"; }; }; then
++	    # We only need to search for static libraries
++	    continue
++	  fi
+ 	fi
+-      fi
+-
+-      # Make sure dlfiles contains only unique files that won't be dlpreopened
+-      old_dlfiles="$dlfiles"
+-      dlfiles=
+-      for lib in $old_dlfiles; do
+-	case " $dlprefiles $dlfiles " in
+-	*" $lib "*) ;;
+-	*) dlfiles="$dlfiles $lib" ;;
+-	esac
+-      done
+-
+-      # Make sure dlprefiles contains only unique files
+-      old_dlprefiles="$dlprefiles"
+-      dlprefiles=
+-      for lib in $old_dlprefiles; do
+-	case "$dlprefiles " in
+-	*" $lib "*) ;;
+-	*) dlprefiles="$dlprefiles $lib" ;;
+-	esac
+-      done
+ 
+-      if test "$build_libtool_libs" = yes; then
+-	if test -n "$rpath"; then
++	link_static=no # Whether the deplib will be linked statically
++	use_static_libs=$prefer_static_libs
++	if test "$use_static_libs" = built && test "$installed" = yes; then
++	  use_static_libs=no
++	fi
++	if test -n "$library_names" &&
++	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ 	  case $host in
+-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+-	    # these systems don't actually have a c library (as such)!
+-	    ;;
+-	  *-*-rhapsody* | *-*-darwin1.[012])
+-	    # Rhapsody C library is in the System framework
+-	    deplibs="$deplibs -framework System"
+-	    ;;
+-	  *-*-netbsd*)
+-	    # Don't link with libc until the a.out ld.so is fixed.
+-	    ;;
+-	  *-*-openbsd*)
+-	    # Do not include libc due to us having libc/libc_r.
++	  *cygwin* | *mingw* | *cegcc*)
++	      # No point in relinking DLLs because paths are not encoded
++	      func_append notinst_deplibs " $lib"
++	      need_relink=no
+ 	    ;;
+ 	  *)
+-	    # Add libc to deplibs on all other systems if necessary.
+-	    if test $build_libtool_need_lc = "yes"; then
+-	      deplibs="$deplibs -lc"
++	    if test "$installed" = no; then
++	      func_append notinst_deplibs " $lib"
++	      need_relink=yes
+ 	    fi
+ 	    ;;
+ 	  esac
+-	fi
++	  # This is a shared library
+ 
+-	# Transform deplibs into only deplibs that can be linked in shared.
+-	name_save=$name
+-	libname_save=$libname
+-	release_save=$release
+-	versuffix_save=$versuffix
+-	major_save=$major
+-	# I'm not sure if I'm treating the release correctly.  I think
+-	# release should show up in the -l (ie -lgmp5) so we don't want to
+-	# add it in twice.  Is that correct?
+-	release=""
+-	versuffix=""
+-	major=""
+-	newdeplibs=
+-	droppeddeps=no
+-	case $deplibs_check_method in
+-	pass_all)
+-	  # Don't check for shared/static.  Everything works.
+-	  # This might be a little naive.  We might want to check
+-	  # whether the library exists or not.  But this is on
+-	  # osf3 & osf4 and I'm not really sure... Just
+-	  # implementing what was already the behaviour.
+-	  newdeplibs=$deplibs
+-	  ;;
+-	test_compile)
+-	  # This code stresses the "libraries are programs" paradigm to its
+-	  # limits. Maybe even breaks it.  We compile a program, linking it
+-	  # against the deplibs as a proxy for the library.  Then we can check
+-	  # whether they linked in statically or dynamically with ldd.
+-	  $rm conftest.c
+-	  cat > conftest.c <<EOF
+-	  int main() { return 0; }
+-EOF
+-	  $rm conftest
+-	  $CC -o conftest conftest.c $deplibs
+-	  if test $? -eq 0 ; then
+-	    ldd_output=`ldd conftest`
+-	    for i in $deplibs; do
+-	      name="`expr $i : '-l\(.*\)'`"
+-	      # If $name is empty we are operating on a -L argument.
+-	      if test -n "$name" && test "$name" != "0"; then
+-		libname=`eval \\$echo \"$libname_spec\"`
+-		deplib_matches=`eval \\$echo \"$library_names_spec\"`
+-		set dummy $deplib_matches
+-		deplib_match=$2
+-		if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+-		  newdeplibs="$newdeplibs $i"
+-		else
+-		  droppeddeps=yes
+-		  echo
+-		  echo "*** Warning: This library needs some functionality provided by $i."
+-		  echo "*** I have the capability to make that library automatically link in when"
+-		  echo "*** you link to this library.  But I can only do this if you have a"
+-		  echo "*** shared version of the library, which you do not appear to have."
+-		fi
++	  # Warn about portability, can't link against -module's on some
++	  # systems (darwin).  Don't bleat about dlopened modules though!
++	  dlopenmodule=""
++	  for dlpremoduletest in $dlprefiles; do
++	    if test "X$dlpremoduletest" = "X$lib"; then
++	      dlopenmodule="$dlpremoduletest"
++	      break
++	    fi
++	  done
++	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
++	    echo
++	    if test "$linkmode" = prog; then
++	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
++	    else
++	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
++	    fi
++	    $ECHO "*** $linklib is not portable!"
++	  fi
++	  if test "$linkmode" = lib &&
++	     test "$hardcode_into_libs" = yes; then
++	    # Hardcode the library path.
++	    # Skip directories that are in the system default run-time
++	    # search path.
++	    case " $sys_lib_dlsearch_path " in
++	    *" $absdir "*) ;;
++	    *)
++	      case "$compile_rpath " in
++	      *" $absdir "*) ;;
++	      *) func_append compile_rpath " $absdir" ;;
++	      esac
++	      ;;
++	    esac
++	    case " $sys_lib_dlsearch_path " in
++	    *" $libdir "*) ;;
++	    *)
++	      case "$finalize_rpath " in
++	      *" $libdir "*) ;;
++	      *) func_append finalize_rpath " $libdir" ;;
++	      esac
++	      ;;
++	    esac
++	  fi
++
++	  if test -n "$old_archive_from_expsyms_cmds"; then
++	    # figure out the soname
++	    set dummy $library_names
++	    shift
++	    realname="$1"
++	    shift
++	    libname=`eval "\\$ECHO \"$libname_spec\""`
++	    # use dlname if we got it. it's perfectly good, no?
++	    if test -n "$dlname"; then
++	      soname="$dlname"
++	    elif test -n "$soname_spec"; then
++	      # bleh windows
++	      case $host in
++	      *cygwin* | mingw* | *cegcc*)
++	        func_arith $current - $age
++		major=$func_arith_result
++		versuffix="-$major"
++		;;
++	      esac
++	      eval soname=\"$soname_spec\"
++	    else
++	      soname="$realname"
++	    fi
++
++	    # Make a new name for the extract_expsyms_cmds to use
++	    soroot="$soname"
++	    func_basename "$soroot"
++	    soname="$func_basename_result"
++	    func_stripname 'lib' '.dll' "$soname"
++	    newlib=libimp-$func_stripname_result.a
++
++	    # If the library has no export list, then create one now
++	    if test -f "$output_objdir/$soname-def"; then :
++	    else
++	      func_verbose "extracting exported symbol list from \`$soname'"
++	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
++	    fi
++
++	    # Create $newlib
++	    if test -f "$output_objdir/$newlib"; then :; else
++	      func_verbose "generating import library for \`$soname'"
++	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
++	    fi
++	    # make sure the library variables are pointing to the new library
++	    dir=$output_objdir
++	    linklib=$newlib
++	  fi # test -n "$old_archive_from_expsyms_cmds"
++
++	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
++	    add_shlibpath=
++	    add_dir=
++	    add=
++	    lib_linked=yes
++	    case $hardcode_action in
++	    immediate | unsupported)
++	      if test "$hardcode_direct" = no; then
++		add="$dir/$linklib"
++		case $host in
++		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
++		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
++		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
++		    *-*-unixware7*) add_dir="-L$dir" ;;
++		  *-*-darwin* )
++		    # if the lib is a (non-dlopened) module then we can not
++		    # link against it, someone is ignoring the earlier warnings
++		    if /usr/bin/file -L $add 2> /dev/null |
++			 $GREP ": [^:]* bundle" >/dev/null ; then
++		      if test "X$dlopenmodule" != "X$lib"; then
++			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
++			if test -z "$old_library" ; then
++			  echo
++			  echo "*** And there doesn't seem to be a static archive available"
++			  echo "*** The link will probably fail, sorry"
++			else
++			  add="$dir/$old_library"
++			fi
++		      elif test -n "$old_library"; then
++			add="$dir/$old_library"
++		      fi
++		    fi
++		esac
++	      elif test "$hardcode_minus_L" = no; then
++		case $host in
++		*-*-sunos*) add_shlibpath="$dir" ;;
++		esac
++		add_dir="-L$dir"
++		add="-l$name"
++	      elif test "$hardcode_shlibpath_var" = no; then
++		add_shlibpath="$dir"
++		add="-l$name"
+ 	      else
+-		newdeplibs="$newdeplibs $i"
++		lib_linked=no
+ 	      fi
+-	    done
+-	  else
+-	    # Error occured in the first compile.  Let's try to salvage the situation:
+-	    # Compile a seperate program for each library.
+-	    for i in $deplibs; do
+-	      name="`expr $i : '-l\(.*\)'`"
+-	     # If $name is empty we are operating on a -L argument.
+-	      if test -n "$name" && test "$name" != "0"; then
+-		$rm conftest
+-		$CC -o conftest conftest.c $i
+-		# Did it work?
+-		if test $? -eq 0 ; then
+-		  ldd_output=`ldd conftest`
+-		  libname=`eval \\$echo \"$libname_spec\"`
+-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+-		  set dummy $deplib_matches
+-		  deplib_match=$2
+-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+-		    newdeplibs="$newdeplibs $i"
+-		  else
+-		    droppeddeps=yes
+-		    echo
+-		    echo "*** Warning: This library needs some functionality provided by $i."
+-		    echo "*** I have the capability to make that library automatically link in when"
+-		    echo "*** you link to this library.  But I can only do this if you have a"
+-		    echo "*** shared version of the library, which you do not appear to have."
+-		  fi
+-		else
+-		  droppeddeps=yes
+-		  echo
+-		  echo "*** Warning!  Library $i is needed by this library but I was not able to"
+-		  echo "***  make it link in!  You will probably need to install it or some"
+-		  echo "*** library that it depends on before this library will be fully"
+-		  echo "*** functional.  Installing it before continuing would be even better."
++	      ;;
++	    relink)
++	      if test "$hardcode_direct" = yes &&
++	         test "$hardcode_direct_absolute" = no; then
++		add="$dir/$linklib"
++	      elif test "$hardcode_minus_L" = yes; then
++		add_dir="-L$dir"
++		# Try looking first in the location we're being installed to.
++		if test -n "$inst_prefix_dir"; then
++		  case $libdir in
++		    [\\/]*)
++		      func_append add_dir " -L$inst_prefix_dir$libdir"
++		      ;;
++		  esac
+ 		fi
++		add="-l$name"
++	      elif test "$hardcode_shlibpath_var" = yes; then
++		add_shlibpath="$dir"
++		add="-l$name"
+ 	      else
+-		newdeplibs="$newdeplibs $i"
+-	      fi
+-	    done
+-	  fi
+-	  ;;
+-	file_magic*)
+-	  set dummy $deplibs_check_method
+-	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+-	  for a_deplib in $deplibs; do
+-	    name="`expr $a_deplib : '-l\(.*\)'`"
+-	    # If $name is empty we are operating on a -L argument.
+-	    if test -n "$name" && test "$name" != "0"; then
+-	      libname=`eval \\$echo \"$libname_spec\"`
+-	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+-		    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+-		    for potent_lib in $potential_libs; do
+-		      # Follow soft links.
+-		      if ls -lLd "$potent_lib" 2>/dev/null \
+-			 | grep " -> " >/dev/null; then
+-			continue
+-		      fi
+-		      # The statement above tries to avoid entering an
+-		      # endless loop below, in case of cyclic links.
+-		      # We might still enter an endless loop, since a link
+-		      # loop can be closed while we follow links,
+-		      # but so what?
+-		      potlib="$potent_lib"
+-		      while test -h "$potlib" 2>/dev/null; do
+-			potliblink=`ls -ld $potlib | sed 's/.* -> //'`
+-			case $potliblink in
+-			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+-			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+-			esac
+-		      done
+-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+-			 | sed 10q \
+-			 | egrep "$file_magic_regex" > /dev/null; then
+-			newdeplibs="$newdeplibs $a_deplib"
+-			a_deplib=""
+-			break 2
+-		      fi
+-		    done
+-	      done
+-	      if test -n "$a_deplib" ; then
+-		droppeddeps=yes
+-		echo
+-		echo "*** Warning: This library needs some functionality provided by $a_deplib."
+-		echo "*** I have the capability to make that library automatically link in when"
+-		echo "*** you link to this library.  But I can only do this if you have a"
+-		echo "*** shared version of the library, which you do not appear to have."
+-	      fi
+-	    else
+-	      # Add a -L argument.
+-	      newdeplibs="$newdeplibs $a_deplib"
+-	    fi
+-	  done # Gone through all deplibs.
+-	  ;;
+-	match_pattern*)
+-	  set dummy $deplibs_check_method
+-	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+-	  for a_deplib in $deplibs; do
+-	    name="`expr $a_deplib : '-l\(.*\)'`"
+-	    # If $name is empty we are operating on a -L argument.
+-	    if test -n "$name" && test "$name" != "0"; then
+-	      libname=`eval \\$echo \"$libname_spec\"`
+-	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+-		potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+-		for potent_lib in $potential_libs; do
+-		  if eval echo \"$potent_lib\" 2>/dev/null \
+-		      | sed 10q \
+-		      | egrep "$match_pattern_regex" > /dev/null; then
+-		    newdeplibs="$newdeplibs $a_deplib"
+-		    a_deplib=""
+-		    break 2
+-		  fi
+-		done
+-	      done
+-	      if test -n "$a_deplib" ; then
+-		droppeddeps=yes
+-		echo
+-		echo "*** Warning: This library needs some functionality provided by $a_deplib."
+-		echo "*** I have the capability to make that library automatically link in when"
+-		echo "*** you link to this library.  But I can only do this if you have a"
+-		echo "*** shared version of the library, which you do not appear to have."
++		lib_linked=no
+ 	      fi
+-	    else
+-	      # Add a -L argument.
+-	      newdeplibs="$newdeplibs $a_deplib"
++	      ;;
++	    *) lib_linked=no ;;
++	    esac
++
++	    if test "$lib_linked" != yes; then
++	      func_fatal_configuration "unsupported hardcode properties"
+ 	    fi
+-	  done # Gone through all deplibs.
+-	  ;;
+-	none | unknown | *)
+-	  newdeplibs=""
+-	  if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+-	       -e 's/ -[LR][^ ]*//g' -e 's/[ 	]//g' |
+-	     grep . >/dev/null; then
+-	    echo
+-	    if test "X$deplibs_check_method" = "Xnone"; then
+-	      echo "*** Warning: inter-library dependencies are not supported in this platform."
++
++	    if test -n "$add_shlibpath"; then
++	      case :$compile_shlibpath: in
++	      *":$add_shlibpath:"*) ;;
++	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
++	      esac
++	    fi
++	    if test "$linkmode" = prog; then
++	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
++	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ 	    else
+-	      echo "*** Warning: inter-library dependencies are not known to be supported."
++	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
++	      test -n "$add" && deplibs="$add $deplibs"
++	      if test "$hardcode_direct" != yes &&
++		 test "$hardcode_minus_L" != yes &&
++		 test "$hardcode_shlibpath_var" = yes; then
++		case :$finalize_shlibpath: in
++		*":$libdir:"*) ;;
++		*) func_append finalize_shlibpath "$libdir:" ;;
++		esac
++	      fi
+ 	    fi
+-	    echo "*** All declared inter-library dependencies are being dropped."
+-	    droppeddeps=yes
+ 	  fi
+-	  ;;
+-	esac
+-	versuffix=$versuffix_save
+-	major=$major_save
+-	release=$release_save
+-	libname=$libname_save
+-	name=$name_save
+-
+-	case $host in
+-	*-*-rhapsody* | *-*-darwin1.[012])
+-	  # On Rhapsody replace the C library is the System framework
+-	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+-	  ;;
+-	esac
+ 
+-	if test "$droppeddeps" = yes; then
+-	  if test "$module" = yes; then
+-	    echo
+-	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+-	    echo "*** dependencies of module $libname.  Therefore, libtool will create"
+-	    echo "*** a static module, that should work as long as the dlopening"
+-	    echo "*** application is linked with the -dlopen flag."
+-	    if test -z "$global_symbol_pipe"; then
+-	      echo
+-	      echo "*** However, this would only work if libtool was able to extract symbol"
+-	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+-	      echo "*** not find such a program.  So, this module is probably useless."
+-	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
++	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
++	    add_shlibpath=
++	    add_dir=
++	    add=
++	    # Finalize command for both is simple: just hardcode it.
++	    if test "$hardcode_direct" = yes &&
++	       test "$hardcode_direct_absolute" = no; then
++	      add="$libdir/$linklib"
++	    elif test "$hardcode_minus_L" = yes; then
++	      add_dir="-L$libdir"
++	      add="-l$name"
++	    elif test "$hardcode_shlibpath_var" = yes; then
++	      case :$finalize_shlibpath: in
++	      *":$libdir:"*) ;;
++	      *) func_append finalize_shlibpath "$libdir:" ;;
++	      esac
++	      add="-l$name"
++	    elif test "$hardcode_automatic" = yes; then
++	      if test -n "$inst_prefix_dir" &&
++		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
++		add="$inst_prefix_dir$libdir/$linklib"
++	      else
++		add="$libdir/$linklib"
++	      fi
++	    else
++	      # We cannot seem to hardcode it, guess we'll fake it.
++	      add_dir="-L$libdir"
++	      # Try looking first in the location we're being installed to.
++	      if test -n "$inst_prefix_dir"; then
++		case $libdir in
++		  [\\/]*)
++		    func_append add_dir " -L$inst_prefix_dir$libdir"
++		    ;;
++		esac
++	      fi
++	      add="-l$name"
+ 	    fi
+-	    if test "$build_old_libs" = no; then
+-	      oldlibs="$output_objdir/$libname.$libext"
+-	      build_libtool_libs=module
+-	      build_old_libs=yes
++
++	    if test "$linkmode" = prog; then
++	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
++	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ 	    else
+-	      build_libtool_libs=no
++	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
++	      test -n "$add" && deplibs="$add $deplibs"
+ 	    fi
++	  fi
++	elif test "$linkmode" = prog; then
++	  # Here we assume that one of hardcode_direct or hardcode_minus_L
++	  # is not unsupported.  This is valid on all known static and
++	  # shared platforms.
++	  if test "$hardcode_direct" != unsupported; then
++	    test -n "$old_library" && linklib="$old_library"
++	    compile_deplibs="$dir/$linklib $compile_deplibs"
++	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+ 	  else
+-	    echo "*** The inter-library dependencies that have been dropped here will be"
+-	    echo "*** automatically added whenever a program is linked with this library"
+-	    echo "*** or is declared to -dlopen it."
++	    compile_deplibs="-l$name -L$dir $compile_deplibs"
++	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
++	  fi
++	elif test "$build_libtool_libs" = yes; then
++	  # Not a shared library
++	  if test "$deplibs_check_method" != pass_all; then
++	    # We're trying link a shared library against a static one
++	    # but the system doesn't support it.
+ 
+-	    if test $allow_undefined = no; then
+-	      echo
+-	      echo "*** Since this library must not contain undefined symbols,"
+-	      echo "*** because either the platform does not support them or"
+-	      echo "*** it was explicitly requested with -no-undefined,"
+-	      echo "*** libtool will only create a static version of it."
++	    # Just print a warning and add the library to dependency_libs so
++	    # that the program can be linked against the static library.
++	    echo
++	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
++	    echo "*** I have the capability to make that library automatically link in when"
++	    echo "*** you link to this library.  But I can only do this if you have a"
++	    echo "*** shared version of the library, which you do not appear to have."
++	    if test "$module" = yes; then
++	      echo "*** But as you try to build a module library, libtool will still create "
++	      echo "*** a static module, that should work as long as the dlopening application"
++	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
++	      if test -z "$global_symbol_pipe"; then
++		echo
++		echo "*** However, this would only work if libtool was able to extract symbol"
++		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++		echo "*** not find such a program.  So, this module is probably useless."
++		echo "*** \`nm' from GNU binutils and a full rebuild may help."
++	      fi
+ 	      if test "$build_old_libs" = no; then
+-		oldlibs="$output_objdir/$libname.$libext"
+ 		build_libtool_libs=module
+ 		build_old_libs=yes
+ 	      else
+ 		build_libtool_libs=no
+ 	      fi
+ 	    fi
++	  else
++	    deplibs="$dir/$old_library $deplibs"
++	    link_static=yes
+ 	  fi
+-	fi
+-	# Done checking deplibs!
+-	deplibs=$newdeplibs
+-      fi
++	fi # link shared/static library?
+ 
+-      # All the library-specific variables (install_libdir is set above).
+-      library_names=
+-      old_library=
+-      dlname=
++	if test "$linkmode" = lib; then
++	  if test -n "$dependency_libs" &&
++	     { test "$hardcode_into_libs" != yes ||
++	       test "$build_old_libs" = yes ||
++	       test "$link_static" = yes; }; then
++	    # Extract -R from dependency_libs
++	    temp_deplibs=
++	    for libdir in $dependency_libs; do
++	      case $libdir in
++	      -R*) func_stripname '-R' '' "$libdir"
++	           temp_xrpath=$func_stripname_result
++		   case " $xrpath " in
++		   *" $temp_xrpath "*) ;;
++		   *) func_append xrpath " $temp_xrpath";;
++		   esac;;
++	      *) func_append temp_deplibs " $libdir";;
++	      esac
++	    done
++	    dependency_libs="$temp_deplibs"
++	  fi
+ 
+-      # Test again, we may have decided not to build it any more
+-      if test "$build_libtool_libs" = yes; then
+-	if test $hardcode_into_libs = yes; then
+-	  # Hardcode the library paths
+-	  hardcode_libdirs=
+-	  dep_rpath=
+-	  rpath="$finalize_rpath"
+-	  test "$mode" != relink && rpath="$compile_rpath$rpath"
+-	  for libdir in $rpath; do
+-	    if test -n "$hardcode_libdir_flag_spec"; then
+-	      if test -n "$hardcode_libdir_separator"; then
+-		if test -z "$hardcode_libdirs"; then
+-		  hardcode_libdirs="$libdir"
++	  func_append newlib_search_path " $absdir"
++	  # Link against this library
++	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
++	  # ... and its dependency_libs
++	  tmp_libs=
++	  for deplib in $dependency_libs; do
++	    newdependency_libs="$deplib $newdependency_libs"
++	    case $deplib in
++              -L*) func_stripname '-L' '' "$deplib"
++                   func_resolve_sysroot "$func_stripname_result";;
++              *) func_resolve_sysroot "$deplib" ;;
++            esac
++	    if $opt_preserve_dup_deps ; then
++	      case "$tmp_libs " in
++	      *" $func_resolve_sysroot_result "*)
++                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
++	      esac
++	    fi
++	    func_append tmp_libs " $func_resolve_sysroot_result"
++	  done
++
++	  if test "$link_all_deplibs" != no; then
++	    # Add the search paths of all dependency libraries
++	    for deplib in $dependency_libs; do
++	      path=
++	      case $deplib in
++	      -L*) path="$deplib" ;;
++	      *.la)
++	        func_resolve_sysroot "$deplib"
++	        deplib=$func_resolve_sysroot_result
++	        func_dirname "$deplib" "" "."
++		dir=$func_dirname_result
++		# We need an absolute path.
++		case $dir in
++		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
++		*)
++		  absdir=`cd "$dir" && pwd`
++		  if test -z "$absdir"; then
++		    func_warning "cannot determine absolute directory name of \`$dir'"
++		    absdir="$dir"
++		  fi
++		  ;;
++		esac
++		if $GREP "^installed=no" $deplib > /dev/null; then
++		case $host in
++		*-*-darwin*)
++		  depdepl=
++		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
++		  if test -n "$deplibrary_names" ; then
++		    for tmp in $deplibrary_names ; do
++		      depdepl=$tmp
++		    done
++		    if test -f "$absdir/$objdir/$depdepl" ; then
++		      depdepl="$absdir/$objdir/$depdepl"
++		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
++                      if test -z "$darwin_install_name"; then
++                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
++                      fi
++		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
++		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
++		      path=
++		    fi
++		  fi
++		  ;;
++		*)
++		  path="-L$absdir/$objdir"
++		  ;;
++		esac
+ 		else
+-		  # Just accumulate the unique libdirs.
+-		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+-		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+-		    ;;
+-		  *)
+-		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+-		    ;;
+-		  esac
++		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++		  test -z "$libdir" && \
++		    func_fatal_error "\`$deplib' is not a valid libtool archive"
++		  test "$absdir" != "$libdir" && \
++		    func_warning "\`$deplib' seems to be moved"
++
++		  path="-L$absdir"
+ 		fi
+-	      else
+-		eval flag=\"$hardcode_libdir_flag_spec\"
+-		dep_rpath="$dep_rpath $flag"
+-	      fi
+-	    elif test -n "$runpath_var"; then
+-	      case "$perm_rpath " in
+-	      *" $libdir "*) ;;
+-	      *) perm_rpath="$perm_rpath $libdir" ;;
++		;;
++	      esac
++	      case " $deplibs " in
++	      *" $path "*) ;;
++	      *) deplibs="$path $deplibs" ;;
++	      esac
++	    done
++	  fi # link_all_deplibs != no
++	fi # linkmode = lib
++      done # for deplib in $libs
++      if test "$pass" = link; then
++	if test "$linkmode" = "prog"; then
++	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
++	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
++	else
++	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	fi
++      fi
++      dependency_libs="$newdependency_libs"
++      if test "$pass" = dlpreopen; then
++	# Link the dlpreopened libraries before other libraries
++	for deplib in $save_deplibs; do
++	  deplibs="$deplib $deplibs"
++	done
++      fi
++      if test "$pass" != dlopen; then
++	if test "$pass" != conv; then
++	  # Make sure lib_search_path contains only unique directories.
++	  lib_search_path=
++	  for dir in $newlib_search_path; do
++	    case "$lib_search_path " in
++	    *" $dir "*) ;;
++	    *) func_append lib_search_path " $dir" ;;
++	    esac
++	  done
++	  newlib_search_path=
++	fi
++
++	if test "$linkmode,$pass" != "prog,link"; then
++	  vars="deplibs"
++	else
++	  vars="compile_deplibs finalize_deplibs"
++	fi
++	for var in $vars dependency_libs; do
++	  # Add libraries to $var in reverse order
++	  eval tmp_libs=\"\$$var\"
++	  new_libs=
++	  for deplib in $tmp_libs; do
++	    # FIXME: Pedantically, this is the right thing to do, so
++	    #        that some nasty dependency loop isn't accidentally
++	    #        broken:
++	    #new_libs="$deplib $new_libs"
++	    # Pragmatically, this seems to cause very few problems in
++	    # practice:
++	    case $deplib in
++	    -L*) new_libs="$deplib $new_libs" ;;
++	    -R*) ;;
++	    *)
++	      # And here is the reason: when a library appears more
++	      # than once as an explicit dependence of a library, or
++	      # is implicitly linked in more than once by the
++	      # compiler, it is considered special, and multiple
++	      # occurrences thereof are not removed.  Compare this
++	      # with having the same library being listed as a
++	      # dependency of multiple other libraries: in this case,
++	      # we know (pedantically, we assume) the library does not
++	      # need to be listed more than once, so we keep only the
++	      # last copy.  This is not always right, but it is rare
++	      # enough that we require users that really mean to play
++	      # such unportable linking tricks to link the library
++	      # using -Wl,-lname, so that libtool does not consider it
++	      # for duplicate removal.
++	      case " $specialdeplibs " in
++	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
++	      *)
++		case " $new_libs " in
++		*" $deplib "*) ;;
++		*) new_libs="$deplib $new_libs" ;;
++		esac
++		;;
++	      esac
++	      ;;
++	    esac
++	  done
++	  tmp_libs=
++	  for deplib in $new_libs; do
++	    case $deplib in
++	    -L*)
++	      case " $tmp_libs " in
++	      *" $deplib "*) ;;
++	      *) func_append tmp_libs " $deplib" ;;
+ 	      esac
+-	    fi
++	      ;;
++	    *) func_append tmp_libs " $deplib" ;;
++	    esac
+ 	  done
+-	  # Substitute the hardcoded libdirs into the rpath.
+-	  if test -n "$hardcode_libdir_separator" &&
+-	     test -n "$hardcode_libdirs"; then
+-	    libdir="$hardcode_libdirs"
+-	    eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+-	  fi
+-	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+-	    # We should set the runpath_var.
+-	    rpath=
+-	    for dir in $perm_rpath; do
+-	      rpath="$rpath$dir:"
+-	    done
+-	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+-	  fi
+-	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
++	  eval $var=\"$tmp_libs\"
++	done # for var
++      fi
++      # Last step: remove runtime libs from dependency_libs
++      # (they stay in deplibs)
++      tmp_libs=
++      for i in $dependency_libs ; do
++	case " $predeps $postdeps $compiler_lib_search_path " in
++	*" $i "*)
++	  i=""
++	  ;;
++	esac
++	if test -n "$i" ; then
++	  func_append tmp_libs " $i"
+ 	fi
++      done
++      dependency_libs=$tmp_libs
++    done # for pass
++    if test "$linkmode" = prog; then
++      dlfiles="$newdlfiles"
++    fi
++    if test "$linkmode" = prog || test "$linkmode" = lib; then
++      dlprefiles="$newdlprefiles"
++    fi
+ 
+-	shlibpath="$finalize_shlibpath"
+-	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+-	if test -n "$shlibpath"; then
+-	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+-	fi
++    case $linkmode in
++    oldlib)
++      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++	func_warning "\`-dlopen' is ignored for archives"
++      fi
+ 
+-	# Get the real and link names of the library.
+-	eval library_names=\"$library_names_spec\"
+-	set dummy $library_names
+-	realname="$2"
+-	shift; shift
++      case " $deplibs" in
++      *\ -l* | *\ -L*)
++	func_warning "\`-l' and \`-L' are ignored for archives" ;;
++      esac
+ 
+-	if test -n "$soname_spec"; then
+-	  eval soname=\"$soname_spec\"
+-	else
+-	  soname="$realname"
+-	fi
+-	test -z "$dlname" && dlname=$soname
++      test -n "$rpath" && \
++	func_warning "\`-rpath' is ignored for archives"
+ 
+-	lib="$output_objdir/$realname"
+-	for link
+-	do
+-	  linknames="$linknames $link"
+-	done
++      test -n "$xrpath" && \
++	func_warning "\`-R' is ignored for archives"
+ 
+-	# Ensure that we have .o objects for linkers which dislike .lo
+-	# (e.g. aix) in case we are running --disable-static
+-	for obj in $libobjs; do
+-	  xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+-	  if test "X$xdir" = "X$obj"; then
+-	    xdir="."
+-	  else
+-	    xdir="$xdir"
+-	  fi
+-	  baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+-	  oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+-	  if test ! -f $xdir/$oldobj; then
+-	    $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
+-	    $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
+-	  fi
+-	done
++      test -n "$vinfo" && \
++	func_warning "\`-version-info/-version-number' is ignored for archives"
+ 
+-	# Use standard objects if they are pic
+-	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++      test -n "$release" && \
++	func_warning "\`-release' is ignored for archives"
+ 
+-	# Prepare the list of exported symbols
+-	if test -z "$export_symbols"; then
+-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+-	    $show "generating symbol list for \`$libname.la'"
+-	    export_symbols="$output_objdir/$libname.exp"
+-	    $run $rm $export_symbols
+-	    eval cmds=\"$export_symbols_cmds\"
+-	    save_ifs="$IFS"; IFS='~'
+-	    for cmd in $cmds; do
+-	      IFS="$save_ifs"
+-	      $show "$cmd"
+-	      $run eval "$cmd" || exit $?
+-	    done
+-	    IFS="$save_ifs"
+-	    if test -n "$export_symbols_regex"; then
+-	      $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+-	      $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+-	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+-	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
+-	    fi
+-	  fi
++      test -n "$export_symbols$export_symbols_regex" && \
++	func_warning "\`-export-symbols' is ignored for archives"
++
++      # Now set the variables for building old libraries.
++      build_libtool_libs=no
++      oldlibs="$output"
++      func_append objs "$old_deplibs"
++      ;;
++
++    lib)
++      # Make sure we only generate libraries of the form `libNAME.la'.
++      case $outputname in
++      lib*)
++	func_stripname 'lib' '.la' "$outputname"
++	name=$func_stripname_result
++	eval shared_ext=\"$shrext_cmds\"
++	eval libname=\"$libname_spec\"
++	;;
++      *)
++	test "$module" = no && \
++	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
++
++	if test "$need_lib_prefix" != no; then
++	  # Add the "lib" prefix for modules if required
++	  func_stripname '' '.la' "$outputname"
++	  name=$func_stripname_result
++	  eval shared_ext=\"$shrext_cmds\"
++	  eval libname=\"$libname_spec\"
++	else
++	  func_stripname '' '.la' "$outputname"
++	  libname=$func_stripname_result
+ 	fi
++	;;
++      esac
+ 
+-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+-	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
++      if test -n "$objs"; then
++	if test "$deplibs_check_method" != pass_all; then
++	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
++	else
++	  echo
++	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
++	  $ECHO "*** objects $objs is not portable!"
++	  func_append libobjs " $objs"
+ 	fi
++      fi
+ 
+-	if test -n "$convenience"; then
+-	  if test -n "$whole_archive_flag_spec"; then
+-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+-	  else
+-	    gentop="$output_objdir/${outputname}x"
+-	    $show "${rm}r $gentop"
+-	    $run ${rm}r "$gentop"
+-	    $show "mkdir $gentop"
+-	    $run mkdir "$gentop"
+-	    status=$?
+-	    if test $status -ne 0 && test ! -d "$gentop"; then
+-	      exit $status
+-	    fi
+-	    generated="$generated $gentop"
+-
+-	    for xlib in $convenience; do
+-	      # Extract the objects.
+-	      case $xlib in
+-	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+-	      *) xabs=`pwd`"/$xlib" ;;
+-	      esac
+-	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+-	      xdir="$gentop/$xlib"
++      test "$dlself" != no && \
++	func_warning "\`-dlopen self' is ignored for libtool libraries"
+ 
+-	      $show "${rm}r $xdir"
+-	      $run ${rm}r "$xdir"
+-	      $show "mkdir $xdir"
+-	      $run mkdir "$xdir"
+-	      status=$?
+-	      if test $status -ne 0 && test ! -d "$xdir"; then
+-		exit $status
+-	      fi
+-	      $show "(cd $xdir && $AR x $xabs)"
+-	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
++      set dummy $rpath
++      shift
++      test "$#" -gt 1 && \
++	func_warning "ignoring multiple \`-rpath's for a libtool library"
+ 
+-	      libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+-	    done
+-	  fi
+-	fi
++      install_libdir="$1"
+ 
+-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+-	  eval flag=\"$thread_safe_flag_spec\"
+-	  linker_flags="$linker_flags $flag"
++      oldlibs=
++      if test -z "$rpath"; then
++	if test "$build_libtool_libs" = yes; then
++	  # Building a libtool convenience library.
++	  # Some compilers have problems with a `.al' extension so
++	  # convenience libraries should have the same extension an
++	  # archive normally would.
++	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
++	  build_libtool_libs=convenience
++	  build_old_libs=yes
+ 	fi
+ 
+-	# Make a backup of the uninstalled library when relinking
+-	if test "$mode" = relink; then
+-	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+-	fi
++	test -n "$vinfo" && \
++	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+ 
+-	# Do each of the archive commands.
+-	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+-	  eval cmds=\"$archive_expsym_cmds\"
+-	else
+-	  eval cmds=\"$archive_cmds\"
+-	fi
+-	save_ifs="$IFS"; IFS='~'
+-	for cmd in $cmds; do
+-	  IFS="$save_ifs"
+-	  $show "$cmd"
+-	  $run eval "$cmd" || exit $?
+-	done
++	test -n "$release" && \
++	  func_warning "\`-release' is ignored for convenience libraries"
++      else
++
++	# Parse the version information argument.
++	save_ifs="$IFS"; IFS=':'
++	set dummy $vinfo 0 0 0
++	shift
+ 	IFS="$save_ifs"
+ 
+-	# Restore the uninstalled library and exit
+-	if test "$mode" = relink; then
+-	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+-	  exit 0
+-	fi
++	test -n "$7" && \
++	  func_fatal_help "too many parameters to \`-version-info'"
+ 
+-	# Create links to the real library.
+-	for linkname in $linknames; do
+-	  if test "$realname" != "$linkname"; then
+-	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+-	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+-	  fi
+-	done
++	# convert absolute version numbers to libtool ages
++	# this retains compatibility with .la files and attempts
++	# to make the code below a bit more comprehensible
++
++	case $vinfo_number in
++	yes)
++	  number_major="$1"
++	  number_minor="$2"
++	  number_revision="$3"
++	  #
++	  # There are really only two kinds -- those that
++	  # use the current revision as the major version
++	  # and those that subtract age and use age as
++	  # a minor version.  But, then there is irix
++	  # which has an extra 1 added just for fun
++	  #
++	  case $version_type in
++	  darwin|linux|osf|windows|none)
++	    func_arith $number_major + $number_minor
++	    current=$func_arith_result
++	    age="$number_minor"
++	    revision="$number_revision"
++	    ;;
++	  freebsd-aout|freebsd-elf|qnx|sunos)
++	    current="$number_major"
++	    revision="$number_minor"
++	    age="0"
++	    ;;
++	  irix|nonstopux)
++	    func_arith $number_major + $number_minor
++	    current=$func_arith_result
++	    age="$number_minor"
++	    revision="$number_minor"
++	    lt_irix_increment=no
++	    ;;
++	  *)
++	    func_fatal_configuration "$modename: unknown library version type \`$version_type'"
++	    ;;
++	  esac
++	  ;;
++	no)
++	  current="$1"
++	  revision="$2"
++	  age="$3"
++	  ;;
++	esac
+ 
+-	# If -module or -export-dynamic was specified, set the dlname.
+-	if test "$module" = yes || test "$export_dynamic" = yes; then
+-	  # On all known operating systems, these are identical.
+-	  dlname="$soname"
+-	fi
+-      fi
+-      ;;
++	# Check that each of the things are valid numbers.
++	case $current in
++	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
++	*)
++	  func_error "CURRENT \`$current' must be a nonnegative integer"
++	  func_fatal_error "\`$vinfo' is not valid version information"
++	  ;;
++	esac
+ 
+-    obj)
+-      if test -n "$deplibs"; then
+-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+-      fi
++	case $revision in
++	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
++	*)
++	  func_error "REVISION \`$revision' must be a nonnegative integer"
++	  func_fatal_error "\`$vinfo' is not valid version information"
++	  ;;
++	esac
+ 
+-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+-	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+-      fi
++	case $age in
++	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
++	*)
++	  func_error "AGE \`$age' must be a nonnegative integer"
++	  func_fatal_error "\`$vinfo' is not valid version information"
++	  ;;
++	esac
+ 
+-      if test -n "$rpath"; then
+-	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+-      fi
++	if test "$age" -gt "$current"; then
++	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
++	  func_fatal_error "\`$vinfo' is not valid version information"
++	fi
+ 
+-      if test -n "$xrpath"; then
+-	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+-      fi
++	# Calculate the version variables.
++	major=
++	versuffix=
++	verstring=
++	case $version_type in
++	none) ;;
+ 
+-      if test -n "$vinfo"; then
+-	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+-      fi
++	darwin)
++	  # Like Linux, but with the current version available in
++	  # verstring for coding it into the library header
++	  func_arith $current - $age
++	  major=.$func_arith_result
++	  versuffix="$major.$age.$revision"
++	  # Darwin ld doesn't like 0 for these options...
++	  func_arith $current + 1
++	  minor_current=$func_arith_result
++	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
++	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
++	  ;;
+ 
+-      if test -n "$release"; then
+-	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+-      fi
++	freebsd-aout)
++	  major=".$current"
++	  versuffix=".$current.$revision";
++	  ;;
+ 
+-      case $output in
+-      *.lo)
+-	if test -n "$objs$old_deplibs"; then
+-	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+-	  exit 1
+-	fi
+-	libobj="$output"
+-	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+-	;;
+-      *)
+-	libobj=
+-	obj="$output"
+-	;;
+-      esac
++	freebsd-elf)
++	  major=".$current"
++	  versuffix=".$current"
++	  ;;
+ 
+-      # Delete the old objects.
+-      $run $rm $obj $libobj
++	irix | nonstopux)
++	  if test "X$lt_irix_increment" = "Xno"; then
++	    func_arith $current - $age
++	  else
++	    func_arith $current - $age + 1
++	  fi
++	  major=$func_arith_result
+ 
+-      # Objects from convenience libraries.  This assumes
+-      # single-version convenience libraries.  Whenever we create
+-      # different ones for PIC/non-PIC, this we'll have to duplicate
+-      # the extraction.
+-      reload_conv_objs=
+-      gentop=
+-      # reload_cmds runs $LD directly, so let us get rid of
+-      # -Wl from whole_archive_flag_spec
+-      wl=
++	  case $version_type in
++	    nonstopux) verstring_prefix=nonstopux ;;
++	    *)         verstring_prefix=sgi ;;
++	  esac
++	  verstring="$verstring_prefix$major.$revision"
+ 
+-      if test -n "$convenience"; then
+-	if test -n "$whole_archive_flag_spec"; then
+-	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+-	else
+-	  gentop="$output_objdir/${obj}x"
+-	  $show "${rm}r $gentop"
+-	  $run ${rm}r "$gentop"
+-	  $show "mkdir $gentop"
+-	  $run mkdir "$gentop"
+-	  status=$?
+-	  if test $status -ne 0 && test ! -d "$gentop"; then
+-	    exit $status
+-	  fi
+-	  generated="$generated $gentop"
+-
+-	  for xlib in $convenience; do
+-	    # Extract the objects.
+-	    case $xlib in
+-	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+-	    *) xabs=`pwd`"/$xlib" ;;
+-	    esac
+-	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+-	    xdir="$gentop/$xlib"
++	  # Add in all the interfaces that we are compatible with.
++	  loop=$revision
++	  while test "$loop" -ne 0; do
++	    func_arith $revision - $loop
++	    iface=$func_arith_result
++	    func_arith $loop - 1
++	    loop=$func_arith_result
++	    verstring="$verstring_prefix$major.$iface:$verstring"
++	  done
+ 
+-	    $show "${rm}r $xdir"
+-	    $run ${rm}r "$xdir"
+-	    $show "mkdir $xdir"
+-	    $run mkdir "$xdir"
+-	    status=$?
+-	    if test $status -ne 0 && test ! -d "$xdir"; then
+-	      exit $status
+-	    fi
+-	    $show "(cd $xdir && $AR x $xabs)"
+-	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
++	  # Before this point, $major must not contain `.'.
++	  major=.$major
++	  versuffix="$major.$revision"
++	  ;;
++
++	linux)
++	  func_arith $current - $age
++	  major=.$func_arith_result
++	  versuffix="$major.$age.$revision"
++	  ;;
++
++	osf)
++	  func_arith $current - $age
++	  major=.$func_arith_result
++	  versuffix=".$current.$age.$revision"
++	  verstring="$current.$age.$revision"
+ 
+-	    reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
++	  # Add in all the interfaces that we are compatible with.
++	  loop=$age
++	  while test "$loop" -ne 0; do
++	    func_arith $current - $loop
++	    iface=$func_arith_result
++	    func_arith $loop - 1
++	    loop=$func_arith_result
++	    verstring="$verstring:${iface}.0"
+ 	  done
+-	fi
+-      fi
+ 
+-      # Create the old-style object.
+-      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
++	  # Make executables depend on our current version.
++	  func_append verstring ":${current}.0"
++	  ;;
+ 
+-      output="$obj"
+-      eval cmds=\"$reload_cmds\"
+-      save_ifs="$IFS"; IFS='~'
+-      for cmd in $cmds; do
+-	IFS="$save_ifs"
+-	$show "$cmd"
+-	$run eval "$cmd" || exit $?
+-      done
+-      IFS="$save_ifs"
++	qnx)
++	  major=".$current"
++	  versuffix=".$current"
++	  ;;
+ 
+-      # Exit if we aren't doing a library object file.
+-      if test -z "$libobj"; then
+-	if test -n "$gentop"; then
+-	  $show "${rm}r $gentop"
+-	  $run ${rm}r $gentop
+-	fi
++	sunos)
++	  major=".$current"
++	  versuffix=".$current.$revision"
++	  ;;
++
++	windows)
++	  # Use '-' rather than '.', since we only want one
++	  # extension on DOS 8.3 filesystems.
++	  func_arith $current - $age
++	  major=$func_arith_result
++	  versuffix="-$major"
++	  ;;
+ 
+-	exit 0
+-      fi
++	*)
++	  func_fatal_configuration "unknown library version type \`$version_type'"
++	  ;;
++	esac
+ 
+-      if test "$build_libtool_libs" != yes; then
+-	if test -n "$gentop"; then
+-	  $show "${rm}r $gentop"
+-	  $run ${rm}r $gentop
++	# Clear the version info if we defaulted, and they specified a release.
++	if test -z "$vinfo" && test -n "$release"; then
++	  major=
++	  case $version_type in
++	  darwin)
++	    # we can't check for "0.0" in archive_cmds due to quoting
++	    # problems, so we reset it completely
++	    verstring=
++	    ;;
++	  *)
++	    verstring="0.0"
++	    ;;
++	  esac
++	  if test "$need_version" = no; then
++	    versuffix=
++	  else
++	    versuffix=".0.0"
++	  fi
+ 	fi
+ 
+-	# Create an invalid libtool object if no PIC, so that we don't
+-	# accidentally link it into a program.
+-	$show "echo timestamp > $libobj"
+-	$run eval "echo timestamp > $libobj" || exit $?
+-	exit 0
+-      fi
++	# Remove version info from name if versioning should be avoided
++	if test "$avoid_version" = yes && test "$need_version" = no; then
++	  major=
++	  versuffix=
++	  verstring=""
++	fi
+ 
+-      if test -n "$pic_flag" || test "$pic_mode" != default; then
+-	# Only do commands if we really have different PIC objects.
+-	reload_objs="$libobjs $reload_conv_objs"
+-	output="$libobj"
+-	eval cmds=\"$reload_cmds\"
+-	save_ifs="$IFS"; IFS='~'
+-	for cmd in $cmds; do
+-	  IFS="$save_ifs"
+-	  $show "$cmd"
+-	  $run eval "$cmd" || exit $?
+-	done
+-	IFS="$save_ifs"
+-      else
+-	# Just create a symlink.
+-	$show $rm $libobj
+-	$run $rm $libobj
+-	xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+-	if test "X$xdir" = "X$libobj"; then
+-	  xdir="."
++	# Check to see if the archive will have undefined symbols.
++	if test "$allow_undefined" = yes; then
++	  if test "$allow_undefined_flag" = unsupported; then
++	    func_warning "undefined symbols not allowed in $host shared libraries"
++	    build_libtool_libs=no
++	    build_old_libs=yes
++	  fi
+ 	else
+-	  xdir="$xdir"
++	  # Don't allow undefined symbols.
++	  allow_undefined_flag="$no_undefined_flag"
+ 	fi
+-	baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+-	oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+-	$show "(cd $xdir && $LN_S $oldobj $baseobj)"
+-	$run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
+-      fi
+ 
+-      if test -n "$gentop"; then
+-	$show "${rm}r $gentop"
+-	$run ${rm}r $gentop
+       fi
+ 
+-      exit 0
+-      ;;
+-
+-    prog)
+-      case $host in
+-	*cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;;
+-      esac
+-      if test -n "$vinfo"; then
+-	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
++      func_generate_dlsyms "$libname" "$libname" "yes"
++      func_append libobjs " $symfileobj"
++      test "X$libobjs" = "X " && libobjs=
++
++      if test "$opt_mode" != relink; then
++	# Remove our outputs, but don't remove object files since they
++	# may have been created when compiling PIC objects.
++	removelist=
++	tempremovelist=`$ECHO "$output_objdir/*"`
++	for p in $tempremovelist; do
++	  case $p in
++	    *.$objext | *.gcno)
++	       ;;
++	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
++	       if test "X$precious_files_regex" != "X"; then
++		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
++		 then
++		   continue
++		 fi
++	       fi
++	       func_append removelist " $p"
++	       ;;
++	    *) ;;
++	  esac
++	done
++	test -n "$removelist" && \
++	  func_show_eval "${RM}r \$removelist"
+       fi
+ 
+-      if test -n "$release"; then
+-	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+-      fi
++      # Now set the variables for building old libraries.
++      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
++	func_append oldlibs " $output_objdir/$libname.$libext"
+ 
+-      if test "$preload" = yes; then
+-	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
+-	   test "$dlopen_self_static" = unknown; then
+-	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+-	fi
++	# Transform .lo files to .o files.
++	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+       fi
+ 
+-      case $host in
+-      *-*-rhapsody* | *-*-darwin1.[012])
+-	# On Rhapsody replace the C library is the System framework
+-	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+-	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+-	;;
+-      esac
+-
+-      compile_command="$compile_command $compile_deplibs"
+-      finalize_command="$finalize_command $finalize_deplibs"
++      # Eliminate all temporary directories.
++      #for path in $notinst_path; do
++      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
++      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
++      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
++      #done
+ 
+-      if test -n "$rpath$xrpath"; then
++      if test -n "$xrpath"; then
+ 	# If the user specified any rpath flags, then add them.
+-	for libdir in $rpath $xrpath; do
+-	  # This is the magic to use -rpath.
++	temp_xrpath=
++	for libdir in $xrpath; do
++	  func_replace_sysroot "$libdir"
++	  func_append temp_xrpath " -R$func_replace_sysroot_result"
+ 	  case "$finalize_rpath " in
+ 	  *" $libdir "*) ;;
+-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
++	  *) func_append finalize_rpath " $libdir" ;;
+ 	  esac
+ 	done
++	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
++	  dependency_libs="$temp_xrpath $dependency_libs"
++	fi
+       fi
+ 
+-      # Now hardcode the library paths
+-      rpath=
+-      hardcode_libdirs=
+-      for libdir in $compile_rpath $finalize_rpath; do
+-	if test -n "$hardcode_libdir_flag_spec"; then
+-	  if test -n "$hardcode_libdir_separator"; then
+-	    if test -z "$hardcode_libdirs"; then
+-	      hardcode_libdirs="$libdir"
++      # Make sure dlfiles contains only unique files that won't be dlpreopened
++      old_dlfiles="$dlfiles"
++      dlfiles=
++      for lib in $old_dlfiles; do
++	case " $dlprefiles $dlfiles " in
++	*" $lib "*) ;;
++	*) func_append dlfiles " $lib" ;;
++	esac
++      done
++
++      # Make sure dlprefiles contains only unique files
++      old_dlprefiles="$dlprefiles"
++      dlprefiles=
++      for lib in $old_dlprefiles; do
++	case "$dlprefiles " in
++	*" $lib "*) ;;
++	*) func_append dlprefiles " $lib" ;;
++	esac
++      done
++
++      if test "$build_libtool_libs" = yes; then
++	if test -n "$rpath"; then
++	  case $host in
++	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
++	    # these systems don't actually have a c library (as such)!
++	    ;;
++	  *-*-rhapsody* | *-*-darwin1.[012])
++	    # Rhapsody C library is in the System framework
++	    func_append deplibs " System.ltframework"
++	    ;;
++	  *-*-netbsd*)
++	    # Don't link with libc until the a.out ld.so is fixed.
++	    ;;
++	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
++	    # Do not include libc due to us having libc/libc_r.
++	    ;;
++	  *-*-sco3.2v5* | *-*-sco5v6*)
++	    # Causes problems with __ctype
++	    ;;
++	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
++	    # Compiler inserts libc in the correct place for threads to work
++	    ;;
++	  *)
++	    # Add libc to deplibs on all other systems if necessary.
++	    if test "$build_libtool_need_lc" = "yes"; then
++	      func_append deplibs " -lc"
++	    fi
++	    ;;
++	  esac
++	fi
++
++	# Transform deplibs into only deplibs that can be linked in shared.
++	name_save=$name
++	libname_save=$libname
++	release_save=$release
++	versuffix_save=$versuffix
++	major_save=$major
++	# I'm not sure if I'm treating the release correctly.  I think
++	# release should show up in the -l (ie -lgmp5) so we don't want to
++	# add it in twice.  Is that correct?
++	release=""
++	versuffix=""
++	major=""
++	newdeplibs=
++	droppeddeps=no
++	case $deplibs_check_method in
++	pass_all)
++	  # Don't check for shared/static.  Everything works.
++	  # This might be a little naive.  We might want to check
++	  # whether the library exists or not.  But this is on
++	  # osf3 & osf4 and I'm not really sure... Just
++	  # implementing what was already the behavior.
++	  newdeplibs=$deplibs
++	  ;;
++	test_compile)
++	  # This code stresses the "libraries are programs" paradigm to its
++	  # limits. Maybe even breaks it.  We compile a program, linking it
++	  # against the deplibs as a proxy for the library.  Then we can check
++	  # whether they linked in statically or dynamically with ldd.
++	  $opt_dry_run || $RM conftest.c
++	  cat > conftest.c <<EOF
++	  int main() { return 0; }
++EOF
++	  $opt_dry_run || $RM conftest
++	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
++	    ldd_output=`ldd conftest`
++	    for i in $deplibs; do
++	      case $i in
++	      -l*)
++		func_stripname -l '' "$i"
++		name=$func_stripname_result
++		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++		  case " $predeps $postdeps " in
++		  *" $i "*)
++		    func_append newdeplibs " $i"
++		    i=""
++		    ;;
++		  esac
++		fi
++		if test -n "$i" ; then
++		  libname=`eval "\\$ECHO \"$libname_spec\""`
++		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
++		  set dummy $deplib_matches; shift
++		  deplib_match=$1
++		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
++		    func_append newdeplibs " $i"
++		  else
++		    droppeddeps=yes
++		    echo
++		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
++		    echo "*** I have the capability to make that library automatically link in when"
++		    echo "*** you link to this library.  But I can only do this if you have a"
++		    echo "*** shared version of the library, which I believe you do not have"
++		    echo "*** because a test_compile did reveal that the linker did not use it for"
++		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
++		  fi
++		fi
++		;;
++	      *)
++		func_append newdeplibs " $i"
++		;;
++	      esac
++	    done
++	  else
++	    # Error occurred in the first compile.  Let's try to salvage
++	    # the situation: Compile a separate program for each library.
++	    for i in $deplibs; do
++	      case $i in
++	      -l*)
++		func_stripname -l '' "$i"
++		name=$func_stripname_result
++		$opt_dry_run || $RM conftest
++		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
++		  ldd_output=`ldd conftest`
++		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++		    case " $predeps $postdeps " in
++		    *" $i "*)
++		      func_append newdeplibs " $i"
++		      i=""
++		      ;;
++		    esac
++		  fi
++		  if test -n "$i" ; then
++		    libname=`eval "\\$ECHO \"$libname_spec\""`
++		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
++		    set dummy $deplib_matches; shift
++		    deplib_match=$1
++		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
++		      func_append newdeplibs " $i"
++		    else
++		      droppeddeps=yes
++		      echo
++		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
++		      echo "*** I have the capability to make that library automatically link in when"
++		      echo "*** you link to this library.  But I can only do this if you have a"
++		      echo "*** shared version of the library, which you do not appear to have"
++		      echo "*** because a test_compile did reveal that the linker did not use this one"
++		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
++		    fi
++		  fi
++		else
++		  droppeddeps=yes
++		  echo
++		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
++		  echo "*** make it link in!  You will probably need to install it or some"
++		  echo "*** library that it depends on before this library will be fully"
++		  echo "*** functional.  Installing it before continuing would be even better."
++		fi
++		;;
++	      *)
++		func_append newdeplibs " $i"
++		;;
++	      esac
++	    done
++	  fi
++	  ;;
++	file_magic*)
++	  set dummy $deplibs_check_method; shift
++	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
++	  for a_deplib in $deplibs; do
++	    case $a_deplib in
++	    -l*)
++	      func_stripname -l '' "$a_deplib"
++	      name=$func_stripname_result
++	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++		case " $predeps $postdeps " in
++		*" $a_deplib "*)
++		  func_append newdeplibs " $a_deplib"
++		  a_deplib=""
++		  ;;
++		esac
++	      fi
++	      if test -n "$a_deplib" ; then
++		libname=`eval "\\$ECHO \"$libname_spec\""`
++		if test -n "$file_magic_glob"; then
++		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
++		else
++		  libnameglob=$libname
++		fi
++		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
++		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
++		  if test "$want_nocaseglob" = yes; then
++		    shopt -s nocaseglob
++		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
++		    $nocaseglob
++		  else
++		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
++		  fi
++		  for potent_lib in $potential_libs; do
++		      # Follow soft links.
++		      if ls -lLd "$potent_lib" 2>/dev/null |
++			 $GREP " -> " >/dev/null; then
++			continue
++		      fi
++		      # The statement above tries to avoid entering an
++		      # endless loop below, in case of cyclic links.
++		      # We might still enter an endless loop, since a link
++		      # loop can be closed while we follow links,
++		      # but so what?
++		      potlib="$potent_lib"
++		      while test -h "$potlib" 2>/dev/null; do
++			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
++			case $potliblink in
++			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
++			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
++			esac
++		      done
++		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
++			 $SED -e 10q |
++			 $EGREP "$file_magic_regex" > /dev/null; then
++			func_append newdeplibs " $a_deplib"
++			a_deplib=""
++			break 2
++		      fi
++		  done
++		done
++	      fi
++	      if test -n "$a_deplib" ; then
++		droppeddeps=yes
++		echo
++		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
++		echo "*** I have the capability to make that library automatically link in when"
++		echo "*** you link to this library.  But I can only do this if you have a"
++		echo "*** shared version of the library, which you do not appear to have"
++		echo "*** because I did check the linker path looking for a file starting"
++		if test -z "$potlib" ; then
++		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
++		else
++		  $ECHO "*** with $libname and none of the candidates passed a file format test"
++		  $ECHO "*** using a file magic. Last file checked: $potlib"
++		fi
++	      fi
++	      ;;
++	    *)
++	      # Add a -L argument.
++	      func_append newdeplibs " $a_deplib"
++	      ;;
++	    esac
++	  done # Gone through all deplibs.
++	  ;;
++	match_pattern*)
++	  set dummy $deplibs_check_method; shift
++	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
++	  for a_deplib in $deplibs; do
++	    case $a_deplib in
++	    -l*)
++	      func_stripname -l '' "$a_deplib"
++	      name=$func_stripname_result
++	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++		case " $predeps $postdeps " in
++		*" $a_deplib "*)
++		  func_append newdeplibs " $a_deplib"
++		  a_deplib=""
++		  ;;
++		esac
++	      fi
++	      if test -n "$a_deplib" ; then
++		libname=`eval "\\$ECHO \"$libname_spec\""`
++		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
++		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
++		  for potent_lib in $potential_libs; do
++		    potlib="$potent_lib" # see symlink-check above in file_magic test
++		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
++		       $EGREP "$match_pattern_regex" > /dev/null; then
++		      func_append newdeplibs " $a_deplib"
++		      a_deplib=""
++		      break 2
++		    fi
++		  done
++		done
++	      fi
++	      if test -n "$a_deplib" ; then
++		droppeddeps=yes
++		echo
++		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
++		echo "*** I have the capability to make that library automatically link in when"
++		echo "*** you link to this library.  But I can only do this if you have a"
++		echo "*** shared version of the library, which you do not appear to have"
++		echo "*** because I did check the linker path looking for a file starting"
++		if test -z "$potlib" ; then
++		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
++		else
++		  $ECHO "*** with $libname and none of the candidates passed a file format test"
++		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
++		fi
++	      fi
++	      ;;
++	    *)
++	      # Add a -L argument.
++	      func_append newdeplibs " $a_deplib"
++	      ;;
++	    esac
++	  done # Gone through all deplibs.
++	  ;;
++	none | unknown | *)
++	  newdeplibs=""
++	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
++	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++	    for i in $predeps $postdeps ; do
++	      # can't use Xsed below, because $i might contain '/'
++	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
++	    done
++	  fi
++	  case $tmp_deplibs in
++	  *[!\	\ ]*)
++	    echo
++	    if test "X$deplibs_check_method" = "Xnone"; then
++	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+ 	    else
+-	      # Just accumulate the unique libdirs.
+-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+-		;;
+-	      *)
+-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+-		;;
+-	      esac
++	      echo "*** Warning: inter-library dependencies are not known to be supported."
+ 	    fi
+-	  else
+-	    eval flag=\"$hardcode_libdir_flag_spec\"
+-	    rpath="$rpath $flag"
+-	  fi
+-	elif test -n "$runpath_var"; then
+-	  case "$perm_rpath " in
+-	  *" $libdir "*) ;;
+-	  *) perm_rpath="$perm_rpath $libdir" ;;
++	    echo "*** All declared inter-library dependencies are being dropped."
++	    droppeddeps=yes
++	    ;;
+ 	  esac
+-	fi
++	  ;;
++	esac
++	versuffix=$versuffix_save
++	major=$major_save
++	release=$release_save
++	libname=$libname_save
++	name=$name_save
++
+ 	case $host in
+-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+-	  case :$dllsearchpath: in
+-	  *":$libdir:"*) ;;
+-	  *) dllsearchpath="$dllsearchpath:$libdir";;
+-	  esac
++	*-*-rhapsody* | *-*-darwin1.[012])
++	  # On Rhapsody replace the C library with the System framework
++	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+ 	  ;;
+ 	esac
+-      done
+-      # Substitute the hardcoded libdirs into the rpath.
+-      if test -n "$hardcode_libdir_separator" &&
+-	 test -n "$hardcode_libdirs"; then
+-	libdir="$hardcode_libdirs"
+-	eval rpath=\" $hardcode_libdir_flag_spec\"
+-      fi
+-      compile_rpath="$rpath"
+ 
+-      rpath=
+-      hardcode_libdirs=
+-      for libdir in $finalize_rpath; do
+-	if test -n "$hardcode_libdir_flag_spec"; then
+-	  if test -n "$hardcode_libdir_separator"; then
+-	    if test -z "$hardcode_libdirs"; then
+-	      hardcode_libdirs="$libdir"
++	if test "$droppeddeps" = yes; then
++	  if test "$module" = yes; then
++	    echo
++	    echo "*** Warning: libtool could not satisfy all declared inter-library"
++	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
++	    echo "*** a static module, that should work as long as the dlopening"
++	    echo "*** application is linked with the -dlopen flag."
++	    if test -z "$global_symbol_pipe"; then
++	      echo
++	      echo "*** However, this would only work if libtool was able to extract symbol"
++	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++	      echo "*** not find such a program.  So, this module is probably useless."
++	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
++	    fi
++	    if test "$build_old_libs" = no; then
++	      oldlibs="$output_objdir/$libname.$libext"
++	      build_libtool_libs=module
++	      build_old_libs=yes
+ 	    else
+-	      # Just accumulate the unique libdirs.
+-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+-		;;
+-	      *)
+-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+-		;;
+-	      esac
++	      build_libtool_libs=no
+ 	    fi
+ 	  else
+-	    eval flag=\"$hardcode_libdir_flag_spec\"
+-	    rpath="$rpath $flag"
+-	  fi
+-	elif test -n "$runpath_var"; then
+-	  case "$finalize_perm_rpath " in
+-	  *" $libdir "*) ;;
+-	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+-	  esac
+-	fi
+-      done
+-      # Substitute the hardcoded libdirs into the rpath.
+-      if test -n "$hardcode_libdir_separator" &&
+-	 test -n "$hardcode_libdirs"; then
+-	libdir="$hardcode_libdirs"
+-	eval rpath=\" $hardcode_libdir_flag_spec\"
+-      fi
+-      finalize_rpath="$rpath"
+-
+-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+-	# Transform all the library objects into standard objects.
+-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+-      fi
++	    echo "*** The inter-library dependencies that have been dropped here will be"
++	    echo "*** automatically added whenever a program is linked with this library"
++	    echo "*** or is declared to -dlopen it."
+ 
+-      dlsyms=
+-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+-	if test -n "$NM" && test -n "$global_symbol_pipe"; then
+-	  dlsyms="${outputname}S.c"
+-	else
+-	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
++	    if test "$allow_undefined" = no; then
++	      echo
++	      echo "*** Since this library must not contain undefined symbols,"
++	      echo "*** because either the platform does not support them or"
++	      echo "*** it was explicitly requested with -no-undefined,"
++	      echo "*** libtool will only create a static version of it."
++	      if test "$build_old_libs" = no; then
++		oldlibs="$output_objdir/$libname.$libext"
++		build_libtool_libs=module
++		build_old_libs=yes
++	      else
++		build_libtool_libs=no
++	      fi
++	    fi
++	  fi
+ 	fi
++	# Done checking deplibs!
++	deplibs=$newdeplibs
+       fi
++      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
++      case $host in
++	*-*-darwin*)
++	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	  ;;
++      esac
+ 
+-      if test -n "$dlsyms"; then
+-	case $dlsyms in
+-	"") ;;
+-	*.c)
+-	  # Discover the nlist of each of the dlfiles.
+-	  nlist="$output_objdir/${outputname}.nm"
+-
+-	  $show "$rm $nlist ${nlist}S ${nlist}T"
+-	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
+-
+-	  # Parse the name list into a source file.
+-	  $show "creating $output_objdir/$dlsyms"
+-
+-	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+-
+-#ifdef __cplusplus
+-extern \"C\" {
+-#endif
+-
+-/* Prevent the only kind of declaration conflicts we can make. */
+-#define lt_preloaded_symbols some_other_symbol
+-
+-/* External symbol declarations for the compiler. */\
+-"
+-
+-	  if test "$dlself" = yes; then
+-	    $show "generating symbol list for \`$output'"
+-
+-	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+-
+-	    # Add our own program objects to the symbol list.
+-	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+-	    for arg in $progfiles; do
+-	      $show "extracting global C symbols from \`$arg'"
+-	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+-	    done
+-
+-	    if test -n "$exclude_expsyms"; then
+-	      $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+-	      $run eval '$mv "$nlist"T "$nlist"'
+-	    fi
++      # move library search paths that coincide with paths to not yet
++      # installed libraries to the beginning of the library search list
++      new_libs=
++      for path in $notinst_path; do
++	case " $new_libs " in
++	*" -L$path/$objdir "*) ;;
++	*)
++	  case " $deplibs " in
++	  *" -L$path/$objdir "*)
++	    func_append new_libs " -L$path/$objdir" ;;
++	  esac
++	  ;;
++	esac
++      done
++      for deplib in $deplibs; do
++	case $deplib in
++	-L*)
++	  case " $new_libs " in
++	  *" $deplib "*) ;;
++	  *) func_append new_libs " $deplib" ;;
++	  esac
++	  ;;
++	*) func_append new_libs " $deplib" ;;
++	esac
++      done
++      deplibs="$new_libs"
+ 
+-	    if test -n "$export_symbols_regex"; then
+-	      $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+-	      $run eval '$mv "$nlist"T "$nlist"'
+-	    fi
++      # All the library-specific variables (install_libdir is set above).
++      library_names=
++      old_library=
++      dlname=
+ 
+-	    # Prepare the list of exported symbols
+-	    if test -z "$export_symbols"; then
+-	      export_symbols="$output_objdir/$output.exp"
+-	      $run $rm $export_symbols
+-	      $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+-	    else
+-	      $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+-	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+-	      $run eval 'mv "$nlist"T "$nlist"'
++      # Test again, we may have decided not to build it any more
++      if test "$build_libtool_libs" = yes; then
++	if test "$hardcode_into_libs" = yes; then
++	  # Hardcode the library paths
++	  hardcode_libdirs=
++	  dep_rpath=
++	  rpath="$finalize_rpath"
++	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
++	  for libdir in $rpath; do
++	    if test -n "$hardcode_libdir_flag_spec"; then
++	      if test -n "$hardcode_libdir_separator"; then
++		func_replace_sysroot "$libdir"
++		libdir=$func_replace_sysroot_result
++		if test -z "$hardcode_libdirs"; then
++		  hardcode_libdirs="$libdir"
++		else
++		  # Just accumulate the unique libdirs.
++		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++		    ;;
++		  *)
++		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
++		    ;;
++		  esac
++		fi
++	      else
++		eval flag=\"$hardcode_libdir_flag_spec\"
++		func_append dep_rpath " $flag"
++	      fi
++	    elif test -n "$runpath_var"; then
++	      case "$perm_rpath " in
++	      *" $libdir "*) ;;
++	      *) func_apped perm_rpath " $libdir" ;;
++	      esac
+ 	    fi
+-	  fi
+-
+-	  for arg in $dlprefiles; do
+-	    $show "extracting global C symbols from \`$arg'"
+-	    name=`echo "$arg" | sed -e 's%^.*/%%'`
+-	    $run eval 'echo ": $name " >> "$nlist"'
+-	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+ 	  done
+-
+-	  if test -z "$run"; then
+-	    # Make sure we have at least an empty file.
+-	    test -f "$nlist" || : > "$nlist"
+-
+-	    if test -n "$exclude_expsyms"; then
+-	      egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+-	      $mv "$nlist"T "$nlist"
+-	    fi
+-
+-	    # Try sorting and uniquifying the output.
+-	    if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
+-	      :
+-	    else
+-	      grep -v "^: " < "$nlist" > "$nlist"S
+-	    fi
+-
+-	    if test -f "$nlist"S; then
+-	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
++	  # Substitute the hardcoded libdirs into the rpath.
++	  if test -n "$hardcode_libdir_separator" &&
++	     test -n "$hardcode_libdirs"; then
++	    libdir="$hardcode_libdirs"
++	    if test -n "$hardcode_libdir_flag_spec_ld"; then
++	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+ 	    else
+-	      echo '/* NONE */' >> "$output_objdir/$dlsyms"
++	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+ 	    fi
+-
+-	    $echo >> "$output_objdir/$dlsyms" "\
+-
+-#undef lt_preloaded_symbols
+-
+-#if defined (__STDC__) && __STDC__
+-# define lt_ptr void *
+-#else
+-# define lt_ptr char *
+-# define const
+-#endif
+-
+-/* The mapping between symbol names and symbols. */
+-const struct {
+-  const char *name;
+-  lt_ptr address;
+-}
+-lt_preloaded_symbols[] =
+-{\
+-"
+-
+-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
+-
+-	    $echo >> "$output_objdir/$dlsyms" "\
+-  {0, (lt_ptr) 0}
+-};
+-
+-/* This works around a problem in FreeBSD linker */
+-#ifdef FREEBSD_WORKAROUND
+-static const void *lt_preloaded_setup() {
+-  return lt_preloaded_symbols;
+-}
+-#endif
+-
+-#ifdef __cplusplus
+-}
+-#endif\
+-"
+ 	  fi
++	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
++	    # We should set the runpath_var.
++	    rpath=
++	    for dir in $perm_rpath; do
++	      func_append rpath "$dir:"
++	    done
++	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
++	  fi
++	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
++	fi
+ 
+-	  pic_flag_for_symtable=
+-	  case $host in
+-	  # compiling the symbol table file with pic_flag works around
+-	  # a FreeBSD bug that causes programs to crash when -lm is
+-	  # linked before any other PIC object.  But we must not use
+-	  # pic_flag when linking with -static.  The problem exists in
+-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+-	    case "$compile_command " in
+-	    *" -static "*) ;;
+-	    *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
+-	    esac;;
+-	  *-*-hpux*)
+-	    case "$compile_command " in
+-	    *" -static "*) ;;
+-	    *) pic_flag_for_symtable=" $pic_flag -DPIC";;
+-	    esac
+-	  esac
++	shlibpath="$finalize_shlibpath"
++	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
++	if test -n "$shlibpath"; then
++	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
++	fi
++
++	# Get the real and link names of the library.
++	eval shared_ext=\"$shrext_cmds\"
++	eval library_names=\"$library_names_spec\"
++	set dummy $library_names
++	shift
++	realname="$1"
++	shift
+ 
+-	  # Now compile the dynamic symbol file.
+-	  $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+-	  $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+-
+-	  # Clean up the generated files.
+-	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+-	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+-
+-	  # Transform the symbol file into the correct name.
+-	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+-	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+-	  ;;
+-	*)
+-	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+-	  exit 1
+-	  ;;
+-	esac
+-      else
+-	# We keep going just in case the user didn't refer to
+-	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+-	# really was required.
++	if test -n "$soname_spec"; then
++	  eval soname=\"$soname_spec\"
++	else
++	  soname="$realname"
++	fi
++	if test -z "$dlname"; then
++	  dlname=$soname
++	fi
+ 
+-	# Nullify the symbol file.
+-	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+-	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+-      fi
++	lib="$output_objdir/$realname"
++	linknames=
++	for link
++	do
++	  func_append linknames " $link"
++	done
+ 
+-      if test $need_relink = no || test "$build_libtool_libs" != yes; then
+-	# Replace the output file specification.
+-	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+-	link_command="$compile_command$compile_rpath"
++	# Use standard objects if they are pic
++	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
++	test "X$libobjs" = "X " && libobjs=
+ 
+-	# We have no uninstalled library dependencies, so finalize right now.
+-	$show "$link_command"
+-	$run eval "$link_command"
+-	status=$?
++	delfiles=
++	if test -n "$export_symbols" && test -n "$include_expsyms"; then
++	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
++	  export_symbols="$output_objdir/$libname.uexp"
++	  func_append delfiles " $export_symbols"
++	fi
++
++	orig_export_symbols=
++	case $host_os in
++	cygwin* | mingw* | cegcc*)
++	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
++	    # exporting using user supplied symfile
++	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
++	      # and it's NOT already a .def file. Must figure out
++	      # which of the given symbols are data symbols and tag
++	      # them as such. So, trigger use of export_symbols_cmds.
++	      # export_symbols gets reassigned inside the "prepare
++	      # the list of exported symbols" if statement, so the
++	      # include_expsyms logic still works.
++	      orig_export_symbols="$export_symbols"
++	      export_symbols=
++	      always_export_symbols=yes
++	    fi
++	  fi
++	  ;;
++	esac
+ 
+-	# Delete the generated files.
+-	if test -n "$dlsyms"; then
+-	  $show "$rm $output_objdir/${outputname}S.${objext}"
+-	  $run $rm "$output_objdir/${outputname}S.${objext}"
++	# Prepare the list of exported symbols
++	if test -z "$export_symbols"; then
++	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
++	    func_verbose "generating symbol list for \`$libname.la'"
++	    export_symbols="$output_objdir/$libname.exp"
++	    $opt_dry_run || $RM $export_symbols
++	    cmds=$export_symbols_cmds
++	    save_ifs="$IFS"; IFS='~'
++	    for cmd1 in $cmds; do
++	      IFS="$save_ifs"
++	      # Take the normal branch if the nm_file_list_spec branch
++	      # doesn't work or if tool conversion is not needed.
++	      case $nm_file_list_spec~$to_tool_file_cmd in
++		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
++		  try_normal_branch=yes
++		  eval cmd=\"$cmd1\"
++		  func_len " $cmd"
++		  len=$func_len_result
++		  ;;
++		*)
++		  try_normal_branch=no
++		  ;;
++	      esac
++	      if test "$try_normal_branch" = yes \
++		 && { test "$len" -lt "$max_cmd_len" \
++		      || test "$max_cmd_len" -le -1; }
++	      then
++		func_show_eval "$cmd" 'exit $?'
++		skipped_export=false
++	      elif test -n "$nm_file_list_spec"; then
++		func_basename "$output"
++		output_la=$func_basename_result
++		save_libobjs=$libobjs
++		save_output=$output
++		output=${output_objdir}/${output_la}.nm
++		func_to_tool_file "$output"
++		libobjs=$nm_file_list_spec$func_to_tool_file_result
++		func_append delfiles " $output"
++		func_verbose "creating $NM input file list: $output"
++		for obj in $save_libobjs; do
++		  func_to_tool_file "$obj"
++		  $ECHO "$func_to_tool_file_result"
++		done > "$output"
++		eval cmd=\"$cmd1\"
++		func_show_eval "$cmd" 'exit $?'
++		output=$save_output
++		libobjs=$save_libobjs
++		skipped_export=false
++	      else
++		# The command line is too long to execute in one step.
++		func_verbose "using reloadable object file for export list..."
++		skipped_export=:
++		# Break out early, otherwise skipped_export may be
++		# set to false by a later but shorter cmd.
++		break
++	      fi
++	    done
++	    IFS="$save_ifs"
++	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
++	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
++	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
++	    fi
++	  fi
+ 	fi
+ 
+-	exit $status
+-      fi
+-
+-      if test -n "$shlibpath_var"; then
+-	# We should set the shlibpath_var
+-	rpath=
+-	for dir in $temp_rpath; do
+-	  case $dir in
+-	  [\\/]* | [A-Za-z]:[\\/]*)
+-	    # Absolute path.
+-	    rpath="$rpath$dir:"
+-	    ;;
++	if test -n "$export_symbols" && test -n "$include_expsyms"; then
++	  tmp_export_symbols="$export_symbols"
++	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
++	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
++	fi
++
++	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
++	  # The given exports_symbols file has to be filtered, so filter it.
++	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
++	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
++	  # 's' commands which not all seds can handle. GNU sed should be fine
++	  # though. Also, the filter scales superlinearly with the number of
++	  # global variables. join(1) would be nice here, but unfortunately
++	  # isn't a blessed tool.
++	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
++	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
++	  export_symbols=$output_objdir/$libname.def
++	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
++	fi
++
++	tmp_deplibs=
++	for test_deplib in $deplibs; do
++	  case " $convenience " in
++	  *" $test_deplib "*) ;;
+ 	  *)
+-	    # Relative path: add a thisdir entry.
+-	    rpath="$rpath\$thisdir/$dir:"
++	    func_append tmp_deplibs " $test_deplib"
+ 	    ;;
+ 	  esac
+ 	done
+-	temp_rpath="$rpath"
+-      fi
++	deplibs="$tmp_deplibs"
+ 
+-      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+-	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+-      fi
+-      if test -n "$finalize_shlibpath"; then
+-	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+-      fi
++	if test -n "$convenience"; then
++	  if test -n "$whole_archive_flag_spec" &&
++	    test "$compiler_needs_object" = yes &&
++	    test -z "$libobjs"; then
++	    # extract the archives, so we have objects to list.
++	    # TODO: could optimize this to just extract one archive.
++	    whole_archive_flag_spec=
++	  fi
++	  if test -n "$whole_archive_flag_spec"; then
++	    save_libobjs=$libobjs
++	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
++	    test "X$libobjs" = "X " && libobjs=
++	  else
++	    gentop="$output_objdir/${outputname}x"
++	    func_append generated " $gentop"
+ 
+-      compile_var=
+-      finalize_var=
+-      if test -n "$runpath_var"; then
+-	if test -n "$perm_rpath"; then
+-	  # We should set the runpath_var.
+-	  rpath=
+-	  for dir in $perm_rpath; do
+-	    rpath="$rpath$dir:"
+-	  done
+-	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+-	fi
+-	if test -n "$finalize_perm_rpath"; then
+-	  # We should set the runpath_var.
+-	  rpath=
+-	  for dir in $finalize_perm_rpath; do
+-	    rpath="$rpath$dir:"
+-	  done
+-	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
++	    func_extract_archives $gentop $convenience
++	    func_append libobjs " $func_extract_archives_result"
++	    test "X$libobjs" = "X " && libobjs=
++	  fi
+ 	fi
+-      fi
+ 
+-      if test "$no_install" = yes; then
+-	# We don't need to create a wrapper script.
+-	link_command="$compile_var$compile_command$compile_rpath"
+-	# Replace the output file specification.
+-	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+-	# Delete the old output file.
+-	$run $rm $output
+-	# Link the executable and exit
+-	$show "$link_command"
+-	$run eval "$link_command" || exit $?
+-	exit 0
+-      fi
++	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
++	  eval flag=\"$thread_safe_flag_spec\"
++	  func_append linker_flags " $flag"
++	fi
+ 
+-      if test "$hardcode_action" = relink; then
+-	# Fast installation is not supported
+-	link_command="$compile_var$compile_command$compile_rpath"
+-	relink_command="$finalize_var$finalize_command$finalize_rpath"
++	# Make a backup of the uninstalled library when relinking
++	if test "$opt_mode" = relink; then
++	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
++	fi
+ 
+-	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+-	$echo "$modename: \`$output' will be relinked during installation" 1>&2
+-      else
+-	if test "$fast_install" != no; then
+-	  link_command="$finalize_var$compile_command$finalize_rpath"
+-	  if test "$fast_install" = yes; then
+-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
++	# Do each of the archive commands.
++	if test "$module" = yes && test -n "$module_cmds" ; then
++	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
++	    eval test_cmds=\"$module_expsym_cmds\"
++	    cmds=$module_expsym_cmds
+ 	  else
+-	    # fast_install is set to needless
+-	    relink_command=
++	    eval test_cmds=\"$module_cmds\"
++	    cmds=$module_cmds
+ 	  fi
+ 	else
+-	  link_command="$compile_var$compile_command$compile_rpath"
+-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+-	fi
+-      fi
+-
+-      # Replace the output file specification.
+-      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+-
+-      # Delete the old output files.
+-      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+-
+-      $show "$link_command"
+-      $run eval "$link_command" || exit $?
+-
+-      # Now create the wrapper script.
+-      $show "creating $output"
+-
+-      # Quote the relink command for shipping.
+-      if test -n "$relink_command"; then
+-	# Preserve any variables that may affect compiler behavior
+-	for var in $variables_saved_for_relink; do
+-	  if eval test -z \"\${$var+set}\"; then
+-	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+-	  elif eval var_value=\$$var; test -z "$var_value"; then
+-	    relink_command="$var=; export $var; $relink_command"
++	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
++	    eval test_cmds=\"$archive_expsym_cmds\"
++	    cmds=$archive_expsym_cmds
+ 	  else
+-	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+-	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
++	    eval test_cmds=\"$archive_cmds\"
++	    cmds=$archive_cmds
+ 	  fi
+-	done
+-	relink_command="cd `pwd`; $relink_command"
+-	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+-      fi
+-
+-      # Quote $echo for shipping.
+-      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
+-	case $0 in
+-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
+-	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
+-	esac
+-	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+-      else
+-	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+-      fi
+-
+-      # Only actually do things if our run command is non-null.
+-      if test -z "$run"; then
+-	# win32 will think the script is a binary if it has
+-	# a .exe suffix, so we strip it off here.
+-	case $output in
+-	  *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
+-	esac
+-	# test for cygwin because mv fails w/o .exe extensions
+-	case $host in
+-	  *cygwin*) exeext=.exe ;;
+-	  *) exeext= ;;
+-	esac
+-	$rm $output
+-	trap "$rm $output; exit 1" 1 2 15
+-
+-	$echo > $output "\
+-#! $SHELL
+-
+-# $output - temporary wrapper script for $objdir/$outputname
+-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+-#
+-# The $output program cannot be directly executed until all the libtool
+-# libraries that it depends on are installed.
+-#
+-# This wrapper script should never be moved out of the build directory.
+-# If it is, it will not operate correctly.
+-
+-# Sed substitution that helps us do robust quoting.  It backslashifies
+-# metacharacters that are still active within double-quoted strings.
+-Xsed='sed -e 1s/^X//'
+-sed_quote_subst='$sed_quote_subst'
+-
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+-
+-relink_command=\"$relink_command\"
+-
+-# This environment variable determines our operation mode.
+-if test \"\$libtool_install_magic\" = \"$magic\"; then
+-  # install mode needs the following variable:
+-  notinst_deplibs='$notinst_deplibs'
+-else
+-  # When we are sourced in execute mode, \$file and \$echo are already set.
+-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+-    echo=\"$qecho\"
+-    file=\"\$0\"
+-    # Make sure echo works.
+-    if test \"X\$1\" = X--no-reexec; then
+-      # Discard the --no-reexec flag, and continue.
+-      shift
+-    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+-      # Yippee, \$echo works!
+-      :
+-    else
+-      # Restart under the correct shell, and then maybe \$echo will work.
+-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+-    fi
+-  fi\
+-"
+-	$echo >> $output "\
+-
+-  # Find the directory that this script lives in.
+-  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+-
+-  # Follow symbolic links until we get to the real thisdir.
+-  file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
+-  while test -n \"\$file\"; do
+-    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+-
+-    # If there was a directory component, then change thisdir.
+-    if test \"x\$destdir\" != \"x\$file\"; then
+-      case \"\$destdir\" in
+-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+-      *) thisdir=\"\$thisdir/\$destdir\" ;;
+-      esac
+-    fi
+-
+-    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+-    file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
+-  done
+-
+-  # Try to get the absolute directory name.
+-  absdir=\`cd \"\$thisdir\" && pwd\`
+-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+-"
+-
+-	if test "$fast_install" = yes; then
+-	  echo >> $output "\
+-  program=lt-'$outputname'$exeext
+-  progdir=\"\$thisdir/$objdir\"
+-
+-  if test ! -f \"\$progdir/\$program\" || \\
+-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
+-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+-
+-    file=\"\$\$-\$program\"
+-
+-    if test ! -d \"\$progdir\"; then
+-      $mkdir \"\$progdir\"
+-    else
+-      $rm \"\$progdir/\$file\"
+-    fi"
+-
+-	  echo >> $output "\
+-
+-    # relink executable if necessary
+-    if test -n \"\$relink_command\"; then
+-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+-      else
+-	$echo \"\$relink_command_output\" >&2
+-	$rm \"\$progdir/\$file\"
+-	exit 1
+-      fi
+-    fi
+-
+-    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+-    { $rm \"\$progdir/\$program\";
+-      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+-    $rm \"\$progdir/\$file\"
+-  fi"
+-	else
+-	  echo >> $output "\
+-  program='$outputname'
+-  progdir=\"\$thisdir/$objdir\"
+-"
+-	fi
+-
+-	echo >> $output "\
+-
+-  if test -f \"\$progdir/\$program\"; then"
+-
+-	# Export our shlibpath_var if we have one.
+-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+-	  $echo >> $output "\
+-    # Add our own library path to $shlibpath_var
+-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+-
+-    # Some systems cannot cope with colon-terminated $shlibpath_var
+-    # The second colon is a workaround for a bug in BeOS R4 sed
+-    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+-
+-    export $shlibpath_var
+-"
+ 	fi
+ 
+-	# fixup the dll searchpath if we need to.
+-	if test -n "$dllsearchpath"; then
+-	  $echo >> $output "\
+-    # Add the dll search path components to the executable PATH
+-    PATH=$dllsearchpath:\$PATH
+-"
+-	fi
++	if test "X$skipped_export" != "X:" &&
++	   func_len " $test_cmds" &&
++	   len=$func_len_result &&
++	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
++	  :
++	else
++	  # The command line is too long to link in one step, link piecewise
++	  # or, if using GNU ld and skipped_export is not :, use a linker
++	  # script.
++
++	  # Save the value of $output and $libobjs because we want to
++	  # use them later.  If we have whole_archive_flag_spec, we
++	  # want to use save_libobjs as it was before
++	  # whole_archive_flag_spec was expanded, because we can't
++	  # assume the linker understands whole_archive_flag_spec.
++	  # This may have to be revisited, in case too many
++	  # convenience libraries get linked in and end up exceeding
++	  # the spec.
++	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
++	    save_libobjs=$libobjs
++	  fi
++	  save_output=$output
++	  func_basename "$output"
++	  output_la=$func_basename_result
++
++	  # Clear the reloadable object creation command queue and
++	  # initialize k to one.
++	  test_cmds=
++	  concat_cmds=
++	  objlist=
++	  last_robj=
++	  k=1
++
++	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
++	    output=${output_objdir}/${output_la}.lnkscript
++	    func_verbose "creating GNU ld script: $output"
++	    echo 'INPUT (' > $output
++	    for obj in $save_libobjs
++	    do
++	      func_to_tool_file "$obj"
++	      $ECHO "$func_to_tool_file_result" >> $output
++	    done
++	    echo ')' >> $output
++	    func_append delfiles " $output"
++	    func_to_tool_file "$output"
++	    output=$func_to_tool_file_result
++	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
++	    output=${output_objdir}/${output_la}.lnk
++	    func_verbose "creating linker input file list: $output"
++	    : > $output
++	    set x $save_libobjs
++	    shift
++	    firstobj=
++	    if test "$compiler_needs_object" = yes; then
++	      firstobj="$1 "
++	      shift
++	    fi
++	    for obj
++	    do
++	      func_to_tool_file "$obj"
++	      $ECHO "$func_to_tool_file_result" >> $output
++	    done
++	    func_append delfiles " $output"
++	    func_to_tool_file "$output"
++	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
++	  else
++	    if test -n "$save_libobjs"; then
++	      func_verbose "creating reloadable object files..."
++	      output=$output_objdir/$output_la-${k}.$objext
++	      eval test_cmds=\"$reload_cmds\"
++	      func_len " $test_cmds"
++	      len0=$func_len_result
++	      len=$len0
++
++	      # Loop over the list of objects to be linked.
++	      for obj in $save_libobjs
++	      do
++		func_len " $obj"
++		func_arith $len + $func_len_result
++		len=$func_arith_result
++		if test "X$objlist" = X ||
++		   test "$len" -lt "$max_cmd_len"; then
++		  func_append objlist " $obj"
++		else
++		  # The command $test_cmds is almost too long, add a
++		  # command to the queue.
++		  if test "$k" -eq 1 ; then
++		    # The first file doesn't have a previous command to add.
++		    reload_objs=$objlist
++		    eval concat_cmds=\"$reload_cmds\"
++		  else
++		    # All subsequent reloadable object files will link in
++		    # the last one created.
++		    reload_objs="$objlist $last_robj"
++		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
++		  fi
++		  last_robj=$output_objdir/$output_la-${k}.$objext
++		  func_arith $k + 1
++		  k=$func_arith_result
++		  output=$output_objdir/$output_la-${k}.$objext
++		  objlist=" $obj"
++		  func_len " $last_robj"
++		  func_arith $len0 + $func_len_result
++		  len=$func_arith_result
++		fi
++	      done
++	      # Handle the remaining objects by creating one last
++	      # reloadable object file.  All subsequent reloadable object
++	      # files will link in the last one created.
++	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
++	      reload_objs="$objlist $last_robj"
++	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
++	      if test -n "$last_robj"; then
++	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
++	      fi
++	      func_append delfiles " $output"
+ 
+-	$echo >> $output "\
+-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+-      # Run the actual program with our arguments.
+-"
+-	case $host in
+-	# win32 systems need to use the prog path for dll
+-	# lookup to work
+-	*-*-cygwin* | *-*-pw32*)
+-	  $echo >> $output "\
+-      exec \$progdir/\$program \${1+\"\$@\"}
+-"
+-	  ;;
++	    else
++	      output=
++	    fi
+ 
+-	# Backslashes separate directories on plain windows
+-	*-*-mingw | *-*-os2*)
+-	  $echo >> $output "\
+-      exec \$progdir\\\\\$program \${1+\"\$@\"}
+-"
+-	  ;;
++	    if ${skipped_export-false}; then
++	      func_verbose "generating symbol list for \`$libname.la'"
++	      export_symbols="$output_objdir/$libname.exp"
++	      $opt_dry_run || $RM $export_symbols
++	      libobjs=$output
++	      # Append the command to create the export file.
++	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
++	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
++	      if test -n "$last_robj"; then
++		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
++	      fi
++	    fi
+ 
+-	*)
+-	  $echo >> $output "\
+-      # Export the path to the program.
+-      PATH=\"\$progdir:\$PATH\"
+-      export PATH
++	    test -n "$save_libobjs" &&
++	      func_verbose "creating a temporary reloadable object file: $output"
+ 
+-      exec \$program \${1+\"\$@\"}
+-"
+-	  ;;
+-	esac
+-	$echo >> $output "\
+-      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+-      exit 1
+-    fi
+-  else
+-    # The program doesn't exist.
+-    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+-    \$echo \"This script is just a wrapper for \$program.\" 1>&2
+-    echo \"See the $PACKAGE documentation for more information.\" 1>&2
+-    exit 1
+-  fi
+-fi\
+-"
+-	chmod +x $output
+-      fi
+-      exit 0
+-      ;;
+-    esac
++	    # Loop through the commands generated above and execute them.
++	    save_ifs="$IFS"; IFS='~'
++	    for cmd in $concat_cmds; do
++	      IFS="$save_ifs"
++	      $opt_silent || {
++		  func_quote_for_expand "$cmd"
++		  eval "func_echo $func_quote_for_expand_result"
++	      }
++	      $opt_dry_run || eval "$cmd" || {
++		lt_exit=$?
++
++		# Restore the uninstalled library and exit
++		if test "$opt_mode" = relink; then
++		  ( cd "$output_objdir" && \
++		    $RM "${realname}T" && \
++		    $MV "${realname}U" "$realname" )
++		fi
+ 
+-    # See if we need to build an old-fashioned archive.
+-    for oldlib in $oldlibs; do
++		exit $lt_exit
++	      }
++	    done
++	    IFS="$save_ifs"
+ 
+-      if test "$build_libtool_libs" = convenience; then
+-	oldobjs="$libobjs_save"
+-	addlibs="$convenience"
+-	build_libtool_libs=no
+-      else
+-	if test "$build_libtool_libs" = module; then
+-	  oldobjs="$libobjs_save"
+-	  build_libtool_libs=no
+-	else
+-	  oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
+-	fi
+-	addlibs="$old_convenience"
+-      fi
++	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
++	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
++	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
++	    fi
++	  fi
+ 
+-      if test -n "$addlibs"; then
+-	gentop="$output_objdir/${outputname}x"
+-	$show "${rm}r $gentop"
+-	$run ${rm}r "$gentop"
+-	$show "mkdir $gentop"
+-	$run mkdir "$gentop"
+-	status=$?
+-	if test $status -ne 0 && test ! -d "$gentop"; then
+-	  exit $status
+-	fi
+-	generated="$generated $gentop"
+-
+-	# Add in members from convenience archives.
+-	for xlib in $addlibs; do
+-	  # Extract the objects.
+-	  case $xlib in
+-	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+-	  *) xabs=`pwd`"/$xlib" ;;
+-	  esac
+-	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+-	  xdir="$gentop/$xlib"
++          if ${skipped_export-false}; then
++	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
++	      tmp_export_symbols="$export_symbols"
++	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
++	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
++	    fi
+ 
+-	  $show "${rm}r $xdir"
+-	  $run ${rm}r "$xdir"
+-	  $show "mkdir $xdir"
+-	  $run mkdir "$xdir"
+-	  status=$?
+-	  if test $status -ne 0 && test ! -d "$xdir"; then
+-	    exit $status
++	    if test -n "$orig_export_symbols"; then
++	      # The given exports_symbols file has to be filtered, so filter it.
++	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
++	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
++	      # 's' commands which not all seds can handle. GNU sed should be fine
++	      # though. Also, the filter scales superlinearly with the number of
++	      # global variables. join(1) would be nice here, but unfortunately
++	      # isn't a blessed tool.
++	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
++	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
++	      export_symbols=$output_objdir/$libname.def
++	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
++	    fi
+ 	  fi
+-	  $show "(cd $xdir && $AR x $xabs)"
+-	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+ 
+-	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
+-	done
+-      fi
++	  libobjs=$output
++	  # Restore the value of output.
++	  output=$save_output
+ 
+-      # Do each command in the archive commands.
+-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+-	eval cmds=\"$old_archive_from_new_cmds\"
+-      else
+-	# Ensure that we have .o objects in place in case we decided
+-	# not to build a shared library, and have fallen back to building
+-	# static libs even though --disable-static was passed!
+-	for oldobj in $oldobjs; do
+-	  if test ! -f $oldobj; then
+-	    xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
+-	    if test "X$xdir" = "X$oldobj"; then
+-	      xdir="."
++	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
++	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
++	    test "X$libobjs" = "X " && libobjs=
++	  fi
++	  # Expand the library linking commands again to reset the
++	  # value of $libobjs for piecewise linking.
++
++	  # Do each of the archive commands.
++	  if test "$module" = yes && test -n "$module_cmds" ; then
++	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
++	      cmds=$module_expsym_cmds
+ 	    else
+-	      xdir="$xdir"
++	      cmds=$module_cmds
++	    fi
++	  else
++	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
++	      cmds=$archive_expsym_cmds
++	    else
++	      cmds=$archive_cmds
+ 	    fi
+-	    baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
+-	    obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+-	    $show "(cd $xdir && ${LN_S} $obj $baseobj)"
+-	    $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
+ 	  fi
+-	done
+-
+-	eval cmds=\"$old_archive_cmds\"
+-      fi
+-      save_ifs="$IFS"; IFS='~'
+-      for cmd in $cmds; do
+-	IFS="$save_ifs"
+-	$show "$cmd"
+-	$run eval "$cmd" || exit $?
+-      done
+-      IFS="$save_ifs"
+-    done
++	fi
+ 
+-    if test -n "$generated"; then
+-      $show "${rm}r$generated"
+-      $run ${rm}r$generated
+-    fi
++	if test -n "$delfiles"; then
++	  # Append the command to remove temporary files to $cmds.
++	  eval cmds=\"\$cmds~\$RM $delfiles\"
++	fi
+ 
+-    # Now create the libtool archive.
+-    case $output in
+-    *.la)
+-      old_library=
+-      test "$build_old_libs" = yes && old_library="$libname.$libext"
+-      $show "creating $output"
++	# Add any objects from preloaded convenience libraries
++	if test -n "$dlprefiles"; then
++	  gentop="$output_objdir/${outputname}x"
++	  func_append generated " $gentop"
+ 
+-      # Preserve any variables that may affect compiler behavior
+-      for var in $variables_saved_for_relink; do
+-	if eval test -z \"\${$var+set}\"; then
+-	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+-	elif eval var_value=\$$var; test -z "$var_value"; then
+-	  relink_command="$var=; export $var; $relink_command"
+-	else
+-	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+-	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
++	  func_extract_archives $gentop $dlprefiles
++	  func_append libobjs " $func_extract_archives_result"
++	  test "X$libobjs" = "X " && libobjs=
+ 	fi
+-      done
+-      # Quote the link command for shipping.
+-      relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args"
+-      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ 
+-      # Only create the output if not a dry run.
+-      if test -z "$run"; then
+-	for installed in no yes; do
+-	  if test "$installed" = yes; then
+-	    if test -z "$install_libdir"; then
+-	      break
++	save_ifs="$IFS"; IFS='~'
++	for cmd in $cmds; do
++	  IFS="$save_ifs"
++	  eval cmd=\"$cmd\"
++	  $opt_silent || {
++	    func_quote_for_expand "$cmd"
++	    eval "func_echo $func_quote_for_expand_result"
++	  }
++	  $opt_dry_run || eval "$cmd" || {
++	    lt_exit=$?
++
++	    # Restore the uninstalled library and exit
++	    if test "$opt_mode" = relink; then
++	      ( cd "$output_objdir" && \
++	        $RM "${realname}T" && \
++		$MV "${realname}U" "$realname" )
++	    fi
++
++	    exit $lt_exit
++	  }
++	done
++	IFS="$save_ifs"
++
++	# Restore the uninstalled library and exit
++	if test "$opt_mode" = relink; then
++	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
++
++	  if test -n "$convenience"; then
++	    if test -z "$whole_archive_flag_spec"; then
++	      func_show_eval '${RM}r "$gentop"'
+ 	    fi
+-	    output="$output_objdir/$outputname"i
+-	    # Replace all uninstalled libtool libraries with the installed ones
+-	    newdependency_libs=
+-	    for deplib in $dependency_libs; do
+-	      case $deplib in
+-	      *.la)
+-		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+-		eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+-		if test -z "$libdir"; then
+-		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+-		  exit 1
+-		fi
+-		newdependency_libs="$newdependency_libs $libdir/$name"
+-		;;
+-	      *) newdependency_libs="$newdependency_libs $deplib" ;;
+-	      esac
+-	    done
+-	    dependency_libs="$newdependency_libs"
+-	    newdlfiles=
+-	    for lib in $dlfiles; do
+-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+-	      eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+-	      if test -z "$libdir"; then
+-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+-		exit 1
+-	      fi
+-	      newdlfiles="$newdlfiles $libdir/$name"
+-	    done
+-	    dlfiles="$newdlfiles"
+-	    newdlprefiles=
+-	    for lib in $dlprefiles; do
+-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+-	      eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+-	      if test -z "$libdir"; then
+-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+-		exit 1
+-	      fi
+-	      newdlprefiles="$newdlprefiles $libdir/$name"
+-	    done
+-	    dlprefiles="$newdlprefiles"
+ 	  fi
+-	  $rm $output
+-	  # place dlname in correct position for cygwin
+-	  tdlname=$dlname
+-	  case $host,$output,$installed,$module,$dlname in
+-	    *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+-	  esac
+-	  $echo > $output "\
+-# $outputname - a libtool library file
+-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+-#
+-# Please DO NOT delete this file!
+-# It is necessary for linking the library.
+ 
+-# The name that we can dlopen(3).
+-dlname='$tdlname'
++	  exit $EXIT_SUCCESS
++	fi
+ 
+-# Names of this library.
+-library_names='$library_names'
++	# Create links to the real library.
++	for linkname in $linknames; do
++	  if test "$realname" != "$linkname"; then
++	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
++	  fi
++	done
+ 
+-# The name of the static archive.
+-old_library='$old_library'
++	# If -module or -export-dynamic was specified, set the dlname.
++	if test "$module" = yes || test "$export_dynamic" = yes; then
++	  # On all known operating systems, these are identical.
++	  dlname="$soname"
++	fi
++      fi
++      ;;
+ 
+-# Libraries that this one depends upon.
+-dependency_libs='$dependency_libs'
++    obj)
++      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++	func_warning "\`-dlopen' is ignored for objects"
++      fi
+ 
+-# Version information for $libname.
+-current=$current
+-age=$age
+-revision=$revision
++      case " $deplibs" in
++      *\ -l* | *\ -L*)
++	func_warning "\`-l' and \`-L' are ignored for objects" ;;
++      esac
+ 
+-# Is this an already installed library?
+-installed=$installed
++      test -n "$rpath" && \
++	func_warning "\`-rpath' is ignored for objects"
+ 
+-# Files to dlopen/dlpreopen
+-dlopen='$dlfiles'
+-dlpreopen='$dlprefiles'
++      test -n "$xrpath" && \
++	func_warning "\`-R' is ignored for objects"
+ 
+-# Directory that this library needs to be installed in:
+-libdir='$install_libdir'"
+-	  if test "$installed" = no && test $need_relink = yes; then
+-	    $echo >> $output "\
+-relink_command=\"$relink_command\""
+-	  fi
+-	done
+-      fi
++      test -n "$vinfo" && \
++	func_warning "\`-version-info' is ignored for objects"
+ 
+-      # Do a symbolic link so that the libtool archive can be found in
+-      # LD_LIBRARY_PATH before the program is installed.
+-      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+-      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+-      ;;
+-    esac
+-    exit 0
+-    ;;
++      test -n "$release" && \
++	func_warning "\`-release' is ignored for objects"
+ 
+-  # libtool install mode
+-  install)
+-    modename="$modename: install"
++      case $output in
++      *.lo)
++	test -n "$objs$old_deplibs" && \
++	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+ 
+-    # There may be an optional sh(1) argument at the beginning of
+-    # install_prog (especially on Windows NT).
+-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+-       # Allow the use of GNU shtool's install command.
+-       $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
+-      # Aesthetically quote it.
+-      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+-      case $arg in
+-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+-	arg="\"$arg\""
++	libobj=$output
++	func_lo2o "$libobj"
++	obj=$func_lo2o_result
++	;;
++      *)
++	libobj=
++	obj="$output"
+ 	;;
+       esac
+-      install_prog="$arg "
+-      arg="$1"
+-      shift
+-    else
+-      install_prog=
+-      arg="$nonopt"
+-    fi
+ 
+-    # The real first argument should be the name of the installation program.
+-    # Aesthetically quote it.
+-    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+-    case $arg in
+-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+-      arg="\"$arg\""
+-      ;;
+-    esac
+-    install_prog="$install_prog$arg"
++      # Delete the old objects.
++      $opt_dry_run || $RM $obj $libobj
+ 
+-    # We need to accept at least all the BSD install flags.
+-    dest=
+-    files=
+-    opts=
+-    prev=
+-    install_type=
+-    isdir=no
+-    stripme=
+-    for arg
+-    do
+-      if test -n "$dest"; then
+-	files="$files $dest"
+-	dest="$arg"
+-	continue
++      # Objects from convenience libraries.  This assumes
++      # single-version convenience libraries.  Whenever we create
++      # different ones for PIC/non-PIC, this we'll have to duplicate
++      # the extraction.
++      reload_conv_objs=
++      gentop=
++      # reload_cmds runs $LD directly, so let us get rid of
++      # -Wl from whole_archive_flag_spec and hope we can get by with
++      # turning comma into space..
++      wl=
++
++      if test -n "$convenience"; then
++	if test -n "$whole_archive_flag_spec"; then
++	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
++	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
++	else
++	  gentop="$output_objdir/${obj}x"
++	  func_append generated " $gentop"
++
++	  func_extract_archives $gentop $convenience
++	  reload_conv_objs="$reload_objs $func_extract_archives_result"
++	fi
+       fi
+ 
+-      case $arg in
+-      -d) isdir=yes ;;
+-      -f) prev="-f" ;;
+-      -g) prev="-g" ;;
+-      -m) prev="-m" ;;
+-      -o) prev="-o" ;;
+-      -s)
+-	stripme=" -s"
+-	continue
+-	;;
+-      -*) ;;
++      # If we're not building shared, we need to use non_pic_objs
++      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+ 
+-      *)
+-	# If the previous option needed an argument, then skip it.
+-	if test -n "$prev"; then
+-	  prev=
+-	else
+-	  dest="$arg"
+-	  continue
++      # Create the old-style object.
++      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
++
++      output="$obj"
++      func_execute_cmds "$reload_cmds" 'exit $?'
++
++      # Exit if we aren't doing a library object file.
++      if test -z "$libobj"; then
++	if test -n "$gentop"; then
++	  func_show_eval '${RM}r "$gentop"'
+ 	fi
+-	;;
+-      esac
+ 
+-      # Aesthetically quote the argument.
+-      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+-      case $arg in
+-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+-	arg="\"$arg\""
+-	;;
++	exit $EXIT_SUCCESS
++      fi
++
++      if test "$build_libtool_libs" != yes; then
++	if test -n "$gentop"; then
++	  func_show_eval '${RM}r "$gentop"'
++	fi
++
++	# Create an invalid libtool object if no PIC, so that we don't
++	# accidentally link it into a program.
++	# $show "echo timestamp > $libobj"
++	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
++	exit $EXIT_SUCCESS
++      fi
++
++      if test -n "$pic_flag" || test "$pic_mode" != default; then
++	# Only do commands if we really have different PIC objects.
++	reload_objs="$libobjs $reload_conv_objs"
++	output="$libobj"
++	func_execute_cmds "$reload_cmds" 'exit $?'
++      fi
++
++      if test -n "$gentop"; then
++	func_show_eval '${RM}r "$gentop"'
++      fi
++
++      exit $EXIT_SUCCESS
++      ;;
++
++    prog)
++      case $host in
++	*cygwin*) func_stripname '' '.exe' "$output"
++	          output=$func_stripname_result.exe;;
+       esac
+-      install_prog="$install_prog $arg"
+-    done
++      test -n "$vinfo" && \
++	func_warning "\`-version-info' is ignored for programs"
+ 
+-    if test -z "$install_prog"; then
+-      $echo "$modename: you must specify an install program" 1>&2
+-      $echo "$help" 1>&2
+-      exit 1
+-    fi
++      test -n "$release" && \
++	func_warning "\`-release' is ignored for programs"
+ 
+-    if test -n "$prev"; then
+-      $echo "$modename: the \`$prev' option requires an argument" 1>&2
+-      $echo "$help" 1>&2
+-      exit 1
+-    fi
++      test "$preload" = yes \
++        && test "$dlopen_support" = unknown \
++	&& test "$dlopen_self" = unknown \
++	&& test "$dlopen_self_static" = unknown && \
++	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+ 
+-    if test -z "$files"; then
+-      if test -z "$dest"; then
+-	$echo "$modename: no file or destination specified" 1>&2
+-      else
+-	$echo "$modename: you must specify a destination" 1>&2
+-      fi
+-      $echo "$help" 1>&2
+-      exit 1
+-    fi
++      case $host in
++      *-*-rhapsody* | *-*-darwin1.[012])
++	# On Rhapsody replace the C library is the System framework
++	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
++	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
++	;;
++      esac
+ 
+-    # Strip any trailing slash from the destination.
+-    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
++      case $host in
++      *-*-darwin*)
++	# Don't allow lazy linking, it breaks C++ global constructors
++	# But is supposedly fixed on 10.4 or later (yay!).
++	if test "$tagname" = CXX ; then
++	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
++	    10.[0123])
++	      func_append compile_command " ${wl}-bind_at_load"
++	      func_append finalize_command " ${wl}-bind_at_load"
++	    ;;
++	  esac
++	fi
++	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
++	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++	;;
++      esac
+ 
+-    # Check to see that the destination is a directory.
+-    test -d "$dest" && isdir=yes
+-    if test "$isdir" = yes; then
+-      destdir="$dest"
+-      destname=
+-    else
+-      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+-      test "X$destdir" = "X$dest" && destdir=.
+-      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+ 
+-      # Not a directory, so check to see that there is only one file specified.
+-      set dummy $files
+-      if test $# -gt 2; then
+-	$echo "$modename: \`$dest' is not a directory" 1>&2
+-	$echo "$help" 1>&2
+-	exit 1
+-      fi
+-    fi
+-    case $destdir in
+-    [\\/]* | [A-Za-z]:[\\/]*) ;;
+-    *)
+-      for file in $files; do
+-	case $file in
+-	*.lo) ;;
++      # move library search paths that coincide with paths to not yet
++      # installed libraries to the beginning of the library search list
++      new_libs=
++      for path in $notinst_path; do
++	case " $new_libs " in
++	*" -L$path/$objdir "*) ;;
+ 	*)
+-	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+-	  $echo "$help" 1>&2
+-	  exit 1
++	  case " $compile_deplibs " in
++	  *" -L$path/$objdir "*)
++	    func_append new_libs " -L$path/$objdir" ;;
++	  esac
+ 	  ;;
+ 	esac
+       done
+-      ;;
+-    esac
+-
+-    # This variable tells wrapper scripts just to set variables rather
+-    # than running their programs.
+-    libtool_install_magic="$magic"
+-
+-    staticlibs=
+-    future_libdirs=
+-    current_libdirs=
+-    for file in $files; do
+-
+-      # Do each installation.
+-      case $file in
+-      *.$libext)
+-	# Do the static libraries later.
+-	staticlibs="$staticlibs $file"
+-	;;
++      for deplib in $compile_deplibs; do
++	case $deplib in
++	-L*)
++	  case " $new_libs " in
++	  *" $deplib "*) ;;
++	  *) func_append new_libs " $deplib" ;;
++	  esac
++	  ;;
++	*) func_append new_libs " $deplib" ;;
++	esac
++      done
++      compile_deplibs="$new_libs"
+ 
+-      *.la)
+-	# Check to see that this really is a libtool archive.
+-	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+-	else
+-	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+-	  $echo "$help" 1>&2
+-	  exit 1
+-	fi
+ 
+-	library_names=
+-	old_library=
+-	relink_command=
+-	# If there is no directory component, then add one.
+-	case $file in
+-	*/* | *\\*) . $file ;;
+-	*) . ./$file ;;
+-	esac
++      func_append compile_command " $compile_deplibs"
++      func_append finalize_command " $finalize_deplibs"
+ 
+-	# Add the libdir to current_libdirs if it is the destination.
+-	if test "X$destdir" = "X$libdir"; then
+-	  case "$current_libdirs " in
++      if test -n "$rpath$xrpath"; then
++	# If the user specified any rpath flags, then add them.
++	for libdir in $rpath $xrpath; do
++	  # This is the magic to use -rpath.
++	  case "$finalize_rpath " in
+ 	  *" $libdir "*) ;;
+-	  *) current_libdirs="$current_libdirs $libdir" ;;
++	  *) func_append finalize_rpath " $libdir" ;;
+ 	  esac
+-	else
+-	  # Note the libdir as a future libdir.
+-	  case "$future_libdirs " in
++	done
++      fi
++
++      # Now hardcode the library paths
++      rpath=
++      hardcode_libdirs=
++      for libdir in $compile_rpath $finalize_rpath; do
++	if test -n "$hardcode_libdir_flag_spec"; then
++	  if test -n "$hardcode_libdir_separator"; then
++	    if test -z "$hardcode_libdirs"; then
++	      hardcode_libdirs="$libdir"
++	    else
++	      # Just accumulate the unique libdirs.
++	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++		;;
++	      *)
++		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
++		;;
++	      esac
++	    fi
++	  else
++	    eval flag=\"$hardcode_libdir_flag_spec\"
++	    func_append rpath " $flag"
++	  fi
++	elif test -n "$runpath_var"; then
++	  case "$perm_rpath " in
+ 	  *" $libdir "*) ;;
+-	  *) future_libdirs="$future_libdirs $libdir" ;;
++	  *) func_append perm_rpath " $libdir" ;;
+ 	  esac
+ 	fi
++	case $host in
++	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
++	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
++	  case :$dllsearchpath: in
++	  *":$libdir:"*) ;;
++	  ::) dllsearchpath=$libdir;;
++	  *) func_append dllsearchpath ":$libdir";;
++	  esac
++	  case :$dllsearchpath: in
++	  *":$testbindir:"*) ;;
++	  ::) dllsearchpath=$testbindir;;
++	  *) func_append dllsearchpath ":$testbindir";;
++	  esac
++	  ;;
++	esac
++      done
++      # Substitute the hardcoded libdirs into the rpath.
++      if test -n "$hardcode_libdir_separator" &&
++	 test -n "$hardcode_libdirs"; then
++	libdir="$hardcode_libdirs"
++	eval rpath=\" $hardcode_libdir_flag_spec\"
++      fi
++      compile_rpath="$rpath"
+ 
+-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
+-	test "X$dir" = "X$file/" && dir=
+-	dir="$dir$objdir"
+-
+-	if test -n "$relink_command"; then
+-	  $echo "$modename: warning: relinking \`$file'" 1>&2
+-	  $show "$relink_command"
+-	  if $run eval "$relink_command"; then :
++      rpath=
++      hardcode_libdirs=
++      for libdir in $finalize_rpath; do
++	if test -n "$hardcode_libdir_flag_spec"; then
++	  if test -n "$hardcode_libdir_separator"; then
++	    if test -z "$hardcode_libdirs"; then
++	      hardcode_libdirs="$libdir"
++	    else
++	      # Just accumulate the unique libdirs.
++	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++		;;
++	      *)
++		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
++		;;
++	      esac
++	    fi
+ 	  else
+-	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+-	    continue
++	    eval flag=\"$hardcode_libdir_flag_spec\"
++	    func_append rpath " $flag"
+ 	  fi
++	elif test -n "$runpath_var"; then
++	  case "$finalize_perm_rpath " in
++	  *" $libdir "*) ;;
++	  *) func_append finalize_perm_rpath " $libdir" ;;
++	  esac
+ 	fi
++      done
++      # Substitute the hardcoded libdirs into the rpath.
++      if test -n "$hardcode_libdir_separator" &&
++	 test -n "$hardcode_libdirs"; then
++	libdir="$hardcode_libdirs"
++	eval rpath=\" $hardcode_libdir_flag_spec\"
++      fi
++      finalize_rpath="$rpath"
+ 
+-	# See the names of the shared library.
+-	set dummy $library_names
+-	if test -n "$2"; then
+-	  realname="$2"
+-	  shift
+-	  shift
++      if test -n "$libobjs" && test "$build_old_libs" = yes; then
++	# Transform all the library objects into standard objects.
++	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
++	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
++      fi
+ 
+-	  srcname="$realname"
+-	  test -n "$relink_command" && srcname="$realname"T
++      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+ 
+-	  # Install the shared library and build the symlinks.
+-	  $show "$install_prog $dir/$srcname $destdir/$realname"
+-	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
+-	  if test -n "$stripme" && test -n "$striplib"; then
+-	    $show "$striplib $destdir/$realname"
+-	    $run eval "$striplib $destdir/$realname" || exit $?
+-	  fi
++      # template prelinking step
++      if test -n "$prelink_cmds"; then
++	func_execute_cmds "$prelink_cmds" 'exit $?'
++      fi
+ 
+-	  if test $# -gt 0; then
+-	    # Delete the old symlinks, and create new ones.
+-	    for linkname
+-	    do
+-	      if test "$linkname" != "$realname"; then
+-		$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+-		$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+-	      fi
+-	    done
+-	  fi
++      wrappers_required=yes
++      case $host in
++      *cegcc* | *mingw32ce*)
++        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
++        wrappers_required=no
++        ;;
++      *cygwin* | *mingw* )
++        if test "$build_libtool_libs" != yes; then
++          wrappers_required=no
++        fi
++        ;;
++      *)
++        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
++          wrappers_required=no
++        fi
++        ;;
++      esac
++      if test "$wrappers_required" = no; then
++	# Replace the output file specification.
++	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
++	link_command="$compile_command$compile_rpath"
+ 
+-	  # Do each command in the postinstall commands.
+-	  lib="$destdir/$realname"
+-	  eval cmds=\"$postinstall_cmds\"
+-	  save_ifs="$IFS"; IFS='~'
+-	  for cmd in $cmds; do
+-	    IFS="$save_ifs"
+-	    $show "$cmd"
+-	    $run eval "$cmd" || exit $?
+-	  done
+-	  IFS="$save_ifs"
++	# We have no uninstalled library dependencies, so finalize right now.
++	exit_status=0
++	func_show_eval "$link_command" 'exit_status=$?'
++
++	if test -n "$postlink_cmds"; then
++	  func_to_tool_file "$output"
++	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
++	  func_execute_cmds "$postlink_cmds" 'exit $?'
+ 	fi
+ 
+-	# Install the pseudo-library for information purposes.
+-	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+-	instname="$dir/$name"i
+-	$show "$install_prog $instname $destdir/$name"
+-	$run eval "$install_prog $instname $destdir/$name" || exit $?
++	# Delete the generated files.
++	if test -f "$output_objdir/${outputname}S.${objext}"; then
++	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
++	fi
+ 
+-	# Maybe install the static library, too.
+-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+-	;;
++	exit $exit_status
++      fi
+ 
+-      *.lo)
+-	# Install (i.e. copy) a libtool object.
++      if test -n "$compile_shlibpath$finalize_shlibpath"; then
++	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
++      fi
++      if test -n "$finalize_shlibpath"; then
++	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
++      fi
+ 
+-	# Figure out destination file name, if it wasn't already specified.
+-	if test -n "$destname"; then
+-	  destfile="$destdir/$destname"
+-	else
+-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+-	  destfile="$destdir/$destfile"
++      compile_var=
++      finalize_var=
++      if test -n "$runpath_var"; then
++	if test -n "$perm_rpath"; then
++	  # We should set the runpath_var.
++	  rpath=
++	  for dir in $perm_rpath; do
++	    func_append rpath "$dir:"
++	  done
++	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ 	fi
+-
+-	# Deduce the name of the destination old-style object file.
+-	case $destfile in
+-	*.lo)
+-	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+-	  ;;
+-	*.$objext)
+-	  staticdest="$destfile"
+-	  destfile=
+-	  ;;
+-	*)
+-	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+-	  $echo "$help" 1>&2
+-	  exit 1
+-	  ;;
+-	esac
+-
+-	# Install the libtool object if requested.
+-	if test -n "$destfile"; then
+-	  $show "$install_prog $file $destfile"
+-	  $run eval "$install_prog $file $destfile" || exit $?
++	if test -n "$finalize_perm_rpath"; then
++	  # We should set the runpath_var.
++	  rpath=
++	  for dir in $finalize_perm_rpath; do
++	    func_append rpath "$dir:"
++	  done
++	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ 	fi
++      fi
+ 
+-	# Install the old object if enabled.
+-	if test "$build_old_libs" = yes; then
+-	  # Deduce the name of the old-style object file.
+-	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
++      if test "$no_install" = yes; then
++	# We don't need to create a wrapper script.
++	link_command="$compile_var$compile_command$compile_rpath"
++	# Replace the output file specification.
++	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
++	# Delete the old output file.
++	$opt_dry_run || $RM $output
++	# Link the executable and exit
++	func_show_eval "$link_command" 'exit $?'
+ 
+-	  $show "$install_prog $staticobj $staticdest"
+-	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
++	if test -n "$postlink_cmds"; then
++	  func_to_tool_file "$output"
++	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
++	  func_execute_cmds "$postlink_cmds" 'exit $?'
+ 	fi
+-	exit 0
+-	;;
+ 
+-      *)
+-	# Figure out destination file name, if it wasn't already specified.
+-	if test -n "$destname"; then
+-	  destfile="$destdir/$destname"
++	exit $EXIT_SUCCESS
++      fi
++
++      if test "$hardcode_action" = relink; then
++	# Fast installation is not supported
++	link_command="$compile_var$compile_command$compile_rpath"
++	relink_command="$finalize_var$finalize_command$finalize_rpath"
++
++	func_warning "this platform does not like uninstalled shared libraries"
++	func_warning "\`$output' will be relinked during installation"
++      else
++	if test "$fast_install" != no; then
++	  link_command="$finalize_var$compile_command$finalize_rpath"
++	  if test "$fast_install" = yes; then
++	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
++	  else
++	    # fast_install is set to needless
++	    relink_command=
++	  fi
+ 	else
+-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+-	  destfile="$destdir/$destfile"
++	  link_command="$compile_var$compile_command$compile_rpath"
++	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+ 	fi
++      fi
+ 
+-	# Do a test to see if this is really a libtool program.
+-	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+-	  notinst_deplibs=
+-	  relink_command=
++      # Replace the output file specification.
++      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+ 
+-	  # If there is no directory component, then add one.
+-	  case $file in
+-	  */* | *\\*) . $file ;;
+-	  *) . ./$file ;;
+-	  esac
++      # Delete the old output files.
++      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+ 
+-	  # Check the variables that should have been set.
+-	  if test -z "$notinst_deplibs"; then
+-	    $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
+-	    exit 1
+-	  fi
++      func_show_eval "$link_command" 'exit $?'
+ 
+-	  finalize=yes
+-	  for lib in $notinst_deplibs; do
+-	    # Check to see that each library is installed.
+-	    libdir=
+-	    if test -f "$lib"; then
+-	      # If there is no directory component, then add one.
+-	      case $lib in
+-	      */* | *\\*) . $lib ;;
+-	      *) . ./$lib ;;
+-	      esac
+-	    fi
+-	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+-	    if test -n "$libdir" && test ! -f "$libfile"; then
+-	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+-	      finalize=no
+-	    fi
+-	  done
++      if test -n "$postlink_cmds"; then
++	func_to_tool_file "$output_objdir/$outputname"
++	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
++	func_execute_cmds "$postlink_cmds" 'exit $?'
++      fi
+ 
+-	  relink_command=
+-	  # If there is no directory component, then add one.
+-	  case $file in
+-	  */* | *\\*) . $file ;;
+-	  *) . ./$file ;;
+-	  esac
++      # Now create the wrapper script.
++      func_verbose "creating $output"
+ 
+-	  outputname=
+-	  if test "$fast_install" = no && test -n "$relink_command"; then
+-	    if test "$finalize" = yes && test -z "$run"; then
+-	      tmpdir="/tmp"
+-	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
+-	      tmpdir="$tmpdir/libtool-$$"
+-	      if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+-	      else
+-		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+-		continue
+-	      fi
+-	      file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+-	      outputname="$tmpdir/$file"
+-	      # Replace the output file specification.
+-	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
++      # Quote the relink command for shipping.
++      if test -n "$relink_command"; then
++	# Preserve any variables that may affect compiler behavior
++	for var in $variables_saved_for_relink; do
++	  if eval test -z \"\${$var+set}\"; then
++	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
++	  elif eval var_value=\$$var; test -z "$var_value"; then
++	    relink_command="$var=; export $var; $relink_command"
++	  else
++	    func_quote_for_eval "$var_value"
++	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
++	  fi
++	done
++	relink_command="(cd `pwd`; $relink_command)"
++	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
++      fi
+ 
+-	      $show "$relink_command"
+-	      if $run eval "$relink_command"; then :
++      # Only actually do things if not in dry run mode.
++      $opt_dry_run || {
++	# win32 will think the script is a binary if it has
++	# a .exe suffix, so we strip it off here.
++	case $output in
++	  *.exe) func_stripname '' '.exe' "$output"
++	         output=$func_stripname_result ;;
++	esac
++	# test for cygwin because mv fails w/o .exe extensions
++	case $host in
++	  *cygwin*)
++	    exeext=.exe
++	    func_stripname '' '.exe' "$outputname"
++	    outputname=$func_stripname_result ;;
++	  *) exeext= ;;
++	esac
++	case $host in
++	  *cygwin* | *mingw* )
++	    func_dirname_and_basename "$output" "" "."
++	    output_name=$func_basename_result
++	    output_path=$func_dirname_result
++	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
++	    cwrapper="$output_path/$output_name.exe"
++	    $RM $cwrappersource $cwrapper
++	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
++
++	    func_emit_cwrapperexe_src > $cwrappersource
++
++	    # The wrapper executable is built using the $host compiler,
++	    # because it contains $host paths and files. If cross-
++	    # compiling, it, like the target executable, must be
++	    # executed on the $host or under an emulation environment.
++	    $opt_dry_run || {
++	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
++	      $STRIP $cwrapper
++	    }
++
++	    # Now, create the wrapper script for func_source use:
++	    func_ltwrapper_scriptname $cwrapper
++	    $RM $func_ltwrapper_scriptname_result
++	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
++	    $opt_dry_run || {
++	      # note: this script will not be executed, so do not chmod.
++	      if test "x$build" = "x$host" ; then
++		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+ 	      else
+-		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+-		${rm}r "$tmpdir"
+-		continue
++		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+ 	      fi
+-	      file="$outputname"
+-	    else
+-	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
+-	    fi
+-	  else
+-	    # Install the binary that we compiled earlier.
+-	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+-	  fi
+-	fi
++	    }
++	  ;;
++	  * )
++	    $RM $output
++	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+ 
+-	# remove .exe since cygwin /usr/bin/install will append another
+-	# one anyways
+-	case $install_prog,$host in
+-	/usr/bin/install*,*cygwin*)
+-	  case $file:$destfile in
+-	  *.exe:*.exe)
+-	    # this is ok
+-	    ;;
+-	  *.exe:*)
+-	    destfile=$destfile.exe
+-	    ;;
+-	  *:*.exe)
+-	    destfile=`echo $destfile | sed -e 's,.exe$,,'`
+-	    ;;
+-	  esac
++	    func_emit_wrapper no > $output
++	    chmod +x $output
+ 	  ;;
+ 	esac
+-	$show "$install_prog$stripme $file $destfile"
+-	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+-	test -n "$outputname" && ${rm}r "$tmpdir"
+-	;;
+-      esac
+-    done
+-
+-    for file in $staticlibs; do
+-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+-
+-      # Set up the ranlib parameters.
+-      oldlib="$destdir/$name"
++      }
++      exit $EXIT_SUCCESS
++      ;;
++    esac
+ 
+-      $show "$install_prog $file $oldlib"
+-      $run eval "$install_prog \$file \$oldlib" || exit $?
++    # See if we need to build an old-fashioned archive.
++    for oldlib in $oldlibs; do
+ 
+-      if test -n "$stripme" && test -n "$striplib"; then
+-	$show "$old_striplib $oldlib"
+-	$run eval "$old_striplib $oldlib" || exit $?
++      if test "$build_libtool_libs" = convenience; then
++	oldobjs="$libobjs_save $symfileobj"
++	addlibs="$convenience"
++	build_libtool_libs=no
++      else
++	if test "$build_libtool_libs" = module; then
++	  oldobjs="$libobjs_save"
++	  build_libtool_libs=no
++	else
++	  oldobjs="$old_deplibs $non_pic_objects"
++	  if test "$preload" = yes && test -f "$symfileobj"; then
++	    func_append oldobjs " $symfileobj"
++	  fi
++	fi
++	addlibs="$old_convenience"
+       fi
+ 
+-      # Do each command in the postinstall commands.
+-      eval cmds=\"$old_postinstall_cmds\"
+-      save_ifs="$IFS"; IFS='~'
+-      for cmd in $cmds; do
+-	IFS="$save_ifs"
+-	$show "$cmd"
+-	$run eval "$cmd" || exit $?
+-      done
+-      IFS="$save_ifs"
+-    done
+-
+-    if test -n "$future_libdirs"; then
+-      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+-    fi
+-
+-    if test -n "$current_libdirs"; then
+-      # Maybe just do a dry run.
+-      test -n "$run" && current_libdirs=" -n$current_libdirs"
+-      exec_cmd='$SHELL $0 --finish$current_libdirs'
+-    else
+-      exit 0
+-    fi
+-    ;;
++      if test -n "$addlibs"; then
++	gentop="$output_objdir/${outputname}x"
++	func_append generated " $gentop"
+ 
+-  # libtool finish mode
+-  finish)
+-    modename="$modename: finish"
+-    libdirs="$nonopt"
+-    admincmds=
++	func_extract_archives $gentop $addlibs
++	func_append oldobjs " $func_extract_archives_result"
++      fi
+ 
+-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+-      for dir
+-      do
+-	libdirs="$libdirs $dir"
+-      done
++      # Do each command in the archive commands.
++      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
++	cmds=$old_archive_from_new_cmds
++      else
+ 
+-      for libdir in $libdirs; do
+-	if test -n "$finish_cmds"; then
+-	  # Do each command in the finish commands.
+-	  eval cmds=\"$finish_cmds\"
+-	  save_ifs="$IFS"; IFS='~'
+-	  for cmd in $cmds; do
+-	    IFS="$save_ifs"
+-	    $show "$cmd"
+-	    $run eval "$cmd" || admincmds="$admincmds
+-       $cmd"
++	# Add any objects from preloaded convenience libraries
++	if test -n "$dlprefiles"; then
++	  gentop="$output_objdir/${outputname}x"
++	  func_append generated " $gentop"
++
++	  func_extract_archives $gentop $dlprefiles
++	  func_append oldobjs " $func_extract_archives_result"
++	fi
++
++	# POSIX demands no paths to be encoded in archives.  We have
++	# to avoid creating archives with duplicate basenames if we
++	# might have to extract them afterwards, e.g., when creating a
++	# static archive out of a convenience library, or when linking
++	# the entirety of a libtool archive into another (currently
++	# not supported by libtool).
++	if (for obj in $oldobjs
++	    do
++	      func_basename "$obj"
++	      $ECHO "$func_basename_result"
++	    done | sort | sort -uc >/dev/null 2>&1); then
++	  :
++	else
++	  echo "copying selected object files to avoid basename conflicts..."
++	  gentop="$output_objdir/${outputname}x"
++	  func_append generated " $gentop"
++	  func_mkdir_p "$gentop"
++	  save_oldobjs=$oldobjs
++	  oldobjs=
++	  counter=1
++	  for obj in $save_oldobjs
++	  do
++	    func_basename "$obj"
++	    objbase="$func_basename_result"
++	    case " $oldobjs " in
++	    " ") oldobjs=$obj ;;
++	    *[\ /]"$objbase "*)
++	      while :; do
++		# Make sure we don't pick an alternate name that also
++		# overlaps.
++		newobj=lt$counter-$objbase
++		func_arith $counter + 1
++		counter=$func_arith_result
++		case " $oldobjs " in
++		*[\ /]"$newobj "*) ;;
++		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
++		esac
++	      done
++	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
++	      func_append oldobjs " $gentop/$newobj"
++	      ;;
++	    *) func_append oldobjs " $obj" ;;
++	    esac
+ 	  done
+-	  IFS="$save_ifs"
+-	fi
+-	if test -n "$finish_eval"; then
+-	  # Do the single finish_eval.
+-	  eval cmds=\"$finish_eval\"
+-	  $run eval "$cmds" || admincmds="$admincmds
+-       $cmds"
+ 	fi
+-      done
+-    fi
+-
+-    # Exit here if they wanted silent mode.
+-    test "$show" = ":" && exit 0
++	eval cmds=\"$old_archive_cmds\"
+ 
+-    echo "----------------------------------------------------------------------"
+-    echo "Libraries have been installed in:"
+-    for libdir in $libdirs; do
+-      echo "   $libdir"
++	func_len " $cmds"
++	len=$func_len_result
++	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
++	  cmds=$old_archive_cmds
++	elif test -n "$archiver_list_spec"; then
++	  func_verbose "using command file archive linking..."
++	  for obj in $oldobjs
++	  do
++	    func_to_tool_file "$obj"
++	    $ECHO "$func_to_tool_file_result"
++	  done > $output_objdir/$libname.libcmd
++	  func_to_tool_file "$output_objdir/$libname.libcmd"
++	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
++	  cmds=$old_archive_cmds
++	else
++	  # the command line is too long to link in one step, link in parts
++	  func_verbose "using piecewise archive linking..."
++	  save_RANLIB=$RANLIB
++	  RANLIB=:
++	  objlist=
++	  concat_cmds=
++	  save_oldobjs=$oldobjs
++	  oldobjs=
++	  # Is there a better way of finding the last object in the list?
++	  for obj in $save_oldobjs
++	  do
++	    last_oldobj=$obj
++	  done
++	  eval test_cmds=\"$old_archive_cmds\"
++	  func_len " $test_cmds"
++	  len0=$func_len_result
++	  len=$len0
++	  for obj in $save_oldobjs
++	  do
++	    func_len " $obj"
++	    func_arith $len + $func_len_result
++	    len=$func_arith_result
++	    func_append objlist " $obj"
++	    if test "$len" -lt "$max_cmd_len"; then
++	      :
++	    else
++	      # the above command should be used before it gets too long
++	      oldobjs=$objlist
++	      if test "$obj" = "$last_oldobj" ; then
++		RANLIB=$save_RANLIB
++	      fi
++	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
++	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
++	      objlist=
++	      len=$len0
++	    fi
++	  done
++	  RANLIB=$save_RANLIB
++	  oldobjs=$objlist
++	  if test "X$oldobjs" = "X" ; then
++	    eval cmds=\"\$concat_cmds\"
++	  else
++	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
++	  fi
++	fi
++      fi
++      func_execute_cmds "$cmds" 'exit $?'
+     done
+-    echo
+-    echo "If you ever happen to want to link against installed libraries"
+-    echo "in a given directory, LIBDIR, you must either use libtool, and"
+-    echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+-    echo "flag during linking and do at least one of the following:"
+-    if test -n "$shlibpath_var"; then
+-      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+-      echo "     during execution"
+-    fi
+-    if test -n "$runpath_var"; then
+-      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+-      echo "     during linking"
+-    fi
+-    if test -n "$hardcode_libdir_flag_spec"; then
+-      libdir=LIBDIR
+-      eval flag=\"$hardcode_libdir_flag_spec\"
+-
+-      echo "   - use the \`$flag' linker flag"
+-    fi
+-    if test -n "$admincmds"; then
+-      echo "   - have your system administrator run these commands:$admincmds"
+-    fi
+-    if test -f /etc/ld.so.conf; then
+-      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+-    fi
+-    echo
+-    echo "See any operating system documentation about shared libraries for"
+-    echo "more information, such as the ld(1) and ld.so(8) manual pages."
+-    echo "----------------------------------------------------------------------"
+-    exit 0
+-    ;;
+-
+-  # libtool execute mode
+-  execute)
+-    modename="$modename: execute"
+ 
+-    # The first argument is the command name.
+-    cmd="$nonopt"
+-    if test -z "$cmd"; then
+-      $echo "$modename: you must specify a COMMAND" 1>&2
+-      $echo "$help"
+-      exit 1
+-    fi
++    test -n "$generated" && \
++      func_show_eval "${RM}r$generated"
+ 
+-    # Handle -dlopen flags immediately.
+-    for file in $execute_dlfiles; do
+-      if test ! -f "$file"; then
+-	$echo "$modename: \`$file' is not a file" 1>&2
+-	$echo "$help" 1>&2
+-	exit 1
+-      fi
++    # Now create the libtool archive.
++    case $output in
++    *.la)
++      old_library=
++      test "$build_old_libs" = yes && old_library="$libname.$libext"
++      func_verbose "creating $output"
+ 
+-      dir=
+-      case $file in
+-      *.la)
+-	# Check to see that this really is a libtool archive.
+-	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++      # Preserve any variables that may affect compiler behavior
++      for var in $variables_saved_for_relink; do
++	if eval test -z \"\${$var+set}\"; then
++	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
++	elif eval var_value=\$$var; test -z "$var_value"; then
++	  relink_command="$var=; export $var; $relink_command"
+ 	else
+-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+-	  $echo "$help" 1>&2
+-	  exit 1
++	  func_quote_for_eval "$var_value"
++	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ 	fi
++      done
++      # Quote the link command for shipping.
++      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
++      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
++      if test "$hardcode_automatic" = yes ; then
++	relink_command=
++      fi
+ 
+-	# Read the libtool library.
+-	dlname=
+-	library_names=
++      # Only create the output if not a dry run.
++      $opt_dry_run || {
++	for installed in no yes; do
++	  if test "$installed" = yes; then
++	    if test -z "$install_libdir"; then
++	      break
++	    fi
++	    output="$output_objdir/$outputname"i
++	    # Replace all uninstalled libtool libraries with the installed ones
++	    newdependency_libs=
++	    for deplib in $dependency_libs; do
++	      case $deplib in
++	      *.la)
++		func_basename "$deplib"
++		name="$func_basename_result"
++		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++		test -z "$libdir" && \
++		  func_fatal_error "\`$deplib' is not a valid libtool archive"
++		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
++		;;
++	      -L*)
++		func_stripname -L '' "$deplib"
++		func_replace_sysroot "$func_stripname_result"
++		func_append newdependency_libs " -L$func_replace_sysroot_result"
++		;;
++	      -R*)
++		func_stripname -R '' "$deplib"
++		func_replace_sysroot "$func_stripname_result"
++		func_append newdependency_libs " -R$func_replace_sysroot_result"
++		;;
++	      *) func_append newdependency_libs " $deplib" ;;
++	      esac
++	    done
++	    dependency_libs="$newdependency_libs"
++	    newdlfiles=
++
++	    for lib in $dlfiles; do
++	      case $lib in
++	      *.la)
++	        func_basename "$lib"
++		name="$func_basename_result"
++		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
++		test -z "$libdir" && \
++		  func_fatal_error "\`$lib' is not a valid libtool archive"
++		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
++		;;
++	      *) func_append newdlfiles " $lib" ;;
++	      esac
++	    done
++	    dlfiles="$newdlfiles"
++	    newdlprefiles=
++	    for lib in $dlprefiles; do
++	      case $lib in
++	      *.la)
++		# Only pass preopened files to the pseudo-archive (for
++		# eventual linking with the app. that links it) if we
++		# didn't already link the preopened objects directly into
++		# the library:
++		func_basename "$lib"
++		name="$func_basename_result"
++		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
++		test -z "$libdir" && \
++		  func_fatal_error "\`$lib' is not a valid libtool archive"
++		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
++		;;
++	      esac
++	    done
++	    dlprefiles="$newdlprefiles"
++	  else
++	    newdlfiles=
++	    for lib in $dlfiles; do
++	      case $lib in
++		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
++		*) abs=`pwd`"/$lib" ;;
++	      esac
++	      func_append newdlfiles " $abs"
++	    done
++	    dlfiles="$newdlfiles"
++	    newdlprefiles=
++	    for lib in $dlprefiles; do
++	      case $lib in
++		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
++		*) abs=`pwd`"/$lib" ;;
++	      esac
++	      func_append newdlprefiles " $abs"
++	    done
++	    dlprefiles="$newdlprefiles"
++	  fi
++	  $RM $output
++	  # place dlname in correct position for cygwin
++	  # In fact, it would be nice if we could use this code for all target
++	  # systems that can't hard-code library paths into their executables
++	  # and that have no shared library path variable independent of PATH,
++	  # but it turns out we can't easily determine that from inspecting
++	  # libtool variables, so we have to hard-code the OSs to which it
++	  # applies here; at the moment, that means platforms that use the PE
++	  # object format with DLL files.  See the long comment at the top of
++	  # tests/bindir.at for full details.
++	  tdlname=$dlname
++	  case $host,$output,$installed,$module,$dlname in
++	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
++	      # If a -bindir argument was supplied, place the dll there.
++	      if test "x$bindir" != x ;
++	      then
++		func_relative_path "$install_libdir" "$bindir"
++		tdlname=$func_relative_path_result$dlname
++	      else
++		# Otherwise fall back on heuristic.
++		tdlname=../bin/$dlname
++	      fi
++	      ;;
++	  esac
++	  $ECHO > $output "\
++# $outputname - a libtool library file
++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
++#
++# Please DO NOT delete this file!
++# It is necessary for linking the library.
+ 
+-	# If there is no directory component, then add one.
+-	case $file in
+-	*/* | *\\*) . $file ;;
+-	*) . ./$file ;;
+-	esac
++# The name that we can dlopen(3).
++dlname='$tdlname'
+ 
+-	# Skip this library if it cannot be dlopened.
+-	if test -z "$dlname"; then
+-	  # Warn if it was a shared library.
+-	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+-	  continue
+-	fi
++# Names of this library.
++library_names='$library_names'
+ 
+-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+-	test "X$dir" = "X$file" && dir=.
++# The name of the static archive.
++old_library='$old_library'
+ 
+-	if test -f "$dir/$objdir/$dlname"; then
+-	  dir="$dir/$objdir"
+-	else
+-	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+-	  exit 1
+-	fi
+-	;;
++# Linker flags that can not go in dependency_libs.
++inherited_linker_flags='$new_inherited_linker_flags'
+ 
+-      *.lo)
+-	# Just add the directory containing the .lo file.
+-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+-	test "X$dir" = "X$file" && dir=.
+-	;;
++# Libraries that this one depends upon.
++dependency_libs='$dependency_libs'
+ 
+-      *)
+-	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+-	continue
+-	;;
+-      esac
++# Names of additional weak libraries provided by this library
++weak_library_names='$weak_libs'
+ 
+-      # Get the absolute pathname.
+-      absdir=`cd "$dir" && pwd`
+-      test -n "$absdir" && dir="$absdir"
++# Version information for $libname.
++current=$current
++age=$age
++revision=$revision
+ 
+-      # Now add the directory to shlibpath_var.
+-      if eval "test -z \"\$$shlibpath_var\""; then
+-	eval "$shlibpath_var=\"\$dir\""
+-      else
+-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+-      fi
+-    done
++# Is this an already installed library?
++installed=$installed
+ 
+-    # This variable tells wrapper scripts just to set shlibpath_var
+-    # rather than running their programs.
+-    libtool_execute_magic="$magic"
++# Should we warn about portability when linking against -modules?
++shouldnotlink=$module
+ 
+-    # Check if any of the arguments is a wrapper script.
+-    args=
+-    for file
+-    do
+-      case $file in
+-      -*) ;;
+-      *)
+-	# Do a test to see if this is really a libtool program.
+-	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+-	  # If there is no directory component, then add one.
+-	  case $file in
+-	  */* | *\\*) . $file ;;
+-	  *) . ./$file ;;
+-	  esac
++# Files to dlopen/dlpreopen
++dlopen='$dlfiles'
++dlpreopen='$dlprefiles'
+ 
+-	  # Transform arg to wrapped name.
+-	  file="$progdir/$program"
+-	fi
+-	;;
+-      esac
+-      # Quote arguments (to preserve shell metacharacters).
+-      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+-      args="$args \"$file\""
+-    done
++# Directory that this library needs to be installed in:
++libdir='$install_libdir'"
++	  if test "$installed" = no && test "$need_relink" = yes; then
++	    $ECHO >> $output "\
++relink_command=\"$relink_command\""
++	  fi
++	done
++      }
+ 
+-    if test -z "$run"; then
+-      if test -n "$shlibpath_var"; then
+-	# Export the shlibpath_var.
+-	eval "export $shlibpath_var"
+-      fi
++      # Do a symbolic link so that the libtool archive can be found in
++      # LD_LIBRARY_PATH before the program is installed.
++      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
++      ;;
++    esac
++    exit $EXIT_SUCCESS
++}
+ 
+-      # Restore saved enviroment variables
+-      if test "${save_LC_ALL+set}" = set; then
+-	LC_ALL="$save_LC_ALL"; export LC_ALL
+-      fi
+-      if test "${save_LANG+set}" = set; then
+-	LANG="$save_LANG"; export LANG
+-      fi
++{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
++    func_mode_link ${1+"$@"}
+ 
+-      # Now prepare to actually exec the command.
+-      exec_cmd='"$cmd"$args'
+-    else
+-      # Display what would be done.
+-      if test -n "$shlibpath_var"; then
+-	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+-	$echo "export $shlibpath_var"
+-      fi
+-      $echo "$cmd$args"
+-      exit 0
+-    fi
+-    ;;
+ 
+-  # libtool clean and uninstall mode
+-  clean | uninstall)
+-    modename="$modename: $mode"
+-    rm="$nonopt"
++# func_mode_uninstall arg...
++func_mode_uninstall ()
++{
++    $opt_debug
++    RM="$nonopt"
+     files=
+     rmforce=
+     exit_status=0
+@@ -4637,43 +9441,41 @@
+     for arg
+     do
+       case $arg in
+-      -f) rm="$rm $arg"; rmforce=yes ;;
+-      -*) rm="$rm $arg" ;;
+-      *) files="$files $arg" ;;
++      -f) func_append RM " $arg"; rmforce=yes ;;
++      -*) func_append RM " $arg" ;;
++      *) func_append files " $arg" ;;
+       esac
+     done
+ 
+-    if test -z "$rm"; then
+-      $echo "$modename: you must specify an RM program" 1>&2
+-      $echo "$help" 1>&2
+-      exit 1
+-    fi
++    test -z "$RM" && \
++      func_fatal_help "you must specify an RM program"
+ 
+     rmdirs=
+ 
+     for file in $files; do
+-      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+-      if test "X$dir" = "X$file"; then
+-	dir=.
+-	objdir="$objdir"
++      func_dirname "$file" "" "."
++      dir="$func_dirname_result"
++      if test "X$dir" = X.; then
++	odir="$objdir"
+       else
+-	objdir="$dir/$objdir"
++	odir="$dir/$objdir"
+       fi
+-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+-      test $mode = uninstall && objdir="$dir"
++      func_basename "$file"
++      name="$func_basename_result"
++      test "$opt_mode" = uninstall && odir="$dir"
+ 
+-      # Remember objdir for removal later, being careful to avoid duplicates
+-      if test $mode = clean; then
++      # Remember odir for removal later, being careful to avoid duplicates
++      if test "$opt_mode" = clean; then
+ 	case " $rmdirs " in
+-	  *" $objdir "*) ;;
+-	  *) rmdirs="$rmdirs $objdir" ;;
++	  *" $odir "*) ;;
++	  *) func_append rmdirs " $odir" ;;
+ 	esac
+       fi
+ 
+       # Don't error if the file doesn't exist and rm -f was used.
+-      if (test -L "$file") >/dev/null 2>&1 \
+-	|| (test -h "$file") >/dev/null 2>&1 \
+-	|| test -f "$file"; then
++      if { test -L "$file"; } >/dev/null 2>&1 ||
++	 { test -h "$file"; } >/dev/null 2>&1 ||
++	 test -f "$file"; then
+ 	:
+       elif test -d "$file"; then
+ 	exit_status=1
+@@ -4687,298 +9489,154 @@
+       case $name in
+       *.la)
+ 	# Possibly a libtool archive, so verify it.
+-	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+-	  . $dir/$name
++	if func_lalib_p "$file"; then
++	  func_source $dir/$name
+ 
+ 	  # Delete the libtool libraries and symlinks.
+ 	  for n in $library_names; do
+-	    rmfiles="$rmfiles $objdir/$n"
++	    func_append rmfiles " $odir/$n"
+ 	  done
+-	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+-	  test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
++	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+ 
+-	  if test $mode = uninstall; then
++	  case "$opt_mode" in
++	  clean)
++	    case " $library_names " in
++	    *" $dlname "*) ;;
++	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
++	    esac
++	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
++	    ;;
++	  uninstall)
+ 	    if test -n "$library_names"; then
+ 	      # Do each command in the postuninstall commands.
+-	      eval cmds=\"$postuninstall_cmds\"
+-	      save_ifs="$IFS"; IFS='~'
+-	      for cmd in $cmds; do
+-		IFS="$save_ifs"
+-		$show "$cmd"
+-		$run eval "$cmd"
+-		if test $? != 0 && test "$rmforce" != yes; then
+-		  exit_status=1
+-		fi
+-	      done
+-	      IFS="$save_ifs"
++	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ 	    fi
+ 
+ 	    if test -n "$old_library"; then
+ 	      # Do each command in the old_postuninstall commands.
+-	      eval cmds=\"$old_postuninstall_cmds\"
+-	      save_ifs="$IFS"; IFS='~'
+-	      for cmd in $cmds; do
+-		IFS="$save_ifs"
+-		$show "$cmd"
+-		$run eval "$cmd"
+-		if test $? != 0 && test "$rmforce" != yes; then
+-		  exit_status=1
+-		fi
+-	      done
+-	      IFS="$save_ifs"
++	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ 	    fi
+ 	    # FIXME: should reinstall the best remaining shared library.
+-	  fi
++	    ;;
++	  esac
+ 	fi
+ 	;;
+ 
+       *.lo)
+-	if test "$build_old_libs" = yes; then
+-	  oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
+-	  rmfiles="$rmfiles $dir/$oldobj"
++	# Possibly a libtool object, so verify it.
++	if func_lalib_p "$file"; then
++
++	  # Read the .lo file
++	  func_source $dir/$name
++
++	  # Add PIC object to the list of files to remove.
++	  if test -n "$pic_object" &&
++	     test "$pic_object" != none; then
++	    func_append rmfiles " $dir/$pic_object"
++	  fi
++
++	  # Add non-PIC object to the list of files to remove.
++	  if test -n "$non_pic_object" &&
++	     test "$non_pic_object" != none; then
++	    func_append rmfiles " $dir/$non_pic_object"
++	  fi
+ 	fi
+ 	;;
+ 
+       *)
+-	# Do a test to see if this is a libtool program.
+-	if test $mode = clean &&
+-	   (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+-	  relink_command=
+-	  . $dir/$file
++	if test "$opt_mode" = clean ; then
++	  noexename=$name
++	  case $file in
++	  *.exe)
++	    func_stripname '' '.exe' "$file"
++	    file=$func_stripname_result
++	    func_stripname '' '.exe' "$name"
++	    noexename=$func_stripname_result
++	    # $file with .exe has already been added to rmfiles,
++	    # add $file without .exe
++	    func_append rmfiles " $file"
++	    ;;
++	  esac
++	  # Do a test to see if this is a libtool program.
++	  if func_ltwrapper_p "$file"; then
++	    if func_ltwrapper_executable_p "$file"; then
++	      func_ltwrapper_scriptname "$file"
++	      relink_command=
++	      func_source $func_ltwrapper_scriptname_result
++	      func_append rmfiles " $func_ltwrapper_scriptname_result"
++	    else
++	      relink_command=
++	      func_source $dir/$noexename
++	    fi
+ 
+-	  rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+-	  if test "$fast_install" = yes && test -n "$relink_command"; then
+-	    rmfiles="$rmfiles $objdir/lt-$name"
++	    # note $name still contains .exe if it was in $file originally
++	    # as does the version of $file that was added into $rmfiles
++	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
++	    if test "$fast_install" = yes && test -n "$relink_command"; then
++	      func_append rmfiles " $odir/lt-$name"
++	    fi
++	    if test "X$noexename" != "X$name" ; then
++	      func_append rmfiles " $odir/lt-${noexename}.c"
++	    fi
+ 	  fi
+ 	fi
+ 	;;
+       esac
+-      $show "$rm $rmfiles"
+-      $run $rm $rmfiles || exit_status=1
++      func_show_eval "$RM $rmfiles" 'exit_status=1'
+     done
+ 
+     # Try to remove the ${objdir}s in the directories where we deleted files
+     for dir in $rmdirs; do
+       if test -d "$dir"; then
+-	$show "rmdir $dir"
+-	$run rmdir $dir >/dev/null 2>&1
++	func_show_eval "rmdir $dir >/dev/null 2>&1"
+       fi
+     done
+ 
+     exit $exit_status
+-    ;;
++}
+ 
+-  "")
+-    $echo "$modename: you must specify a MODE" 1>&2
+-    $echo "$generic_help" 1>&2
+-    exit 1
+-    ;;
+-  esac
++{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
++    func_mode_uninstall ${1+"$@"}
+ 
+-  if test -z "$exec_cmd"; then
+-    $echo "$modename: invalid operation mode \`$mode'" 1>&2
+-    $echo "$generic_help" 1>&2
+-    exit 1
+-  fi
+-fi # test -z "$show_help"
++test -z "$opt_mode" && {
++  help="$generic_help"
++  func_fatal_help "you must specify a MODE"
++}
++
++test -z "$exec_cmd" && \
++  func_fatal_help "invalid operation mode \`$opt_mode'"
+ 
+ if test -n "$exec_cmd"; then
+-  eval exec $exec_cmd
+-  exit 1
++  eval exec "$exec_cmd"
++  exit $EXIT_FAILURE
+ fi
+ 
+-# We need to display help for each of the modes.
+-case $mode in
+-"") $echo \
+-"Usage: $modename [OPTION]... [MODE-ARG]...
+-
+-Provide generalized library-building support services.
+-
+-    --config          show all configuration variables
+-    --debug           enable verbose shell tracing
+--n, --dry-run         display commands without modifying any files
+-    --features        display basic configuration information and exit
+-    --finish          same as \`--mode=finish'
+-    --help            display this help message and exit
+-    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
+-    --quiet           same as \`--silent'
+-    --silent          don't print informational messages
+-    --version         print version information
+-
+-MODE must be one of the following:
+-
+-      clean           remove files from the build directory
+-      compile         compile a source file into a libtool object
+-      execute         automatically set library path, then run a program
+-      finish          complete the installation of libtool libraries
+-      install         install libraries or executables
+-      link            create a library or an executable
+-      uninstall       remove libraries from an installed directory
+-
+-MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
+-a more detailed description of MODE."
+-  exit 0
+-  ;;
+-
+-clean)
+-  $echo \
+-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+-
+-Remove files from the build directory.
+-
+-RM is the name of the program to use to delete files associated with each FILE
+-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+-to RM.
+-
+-If FILE is a libtool library, object or program, all the files associated
+-with it are deleted. Otherwise, only FILE itself is deleted using RM."
+-  ;;
+-
+-compile)
+-  $echo \
+-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+-
+-Compile a source file into a libtool library object.
+-
+-This mode accepts the following additional options:
+-
+-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+-  -prefer-pic       try to building PIC objects only
+-  -prefer-non-pic   try to building non-PIC objects only
+-  -static           always build a \`.o' file suitable for static linking
+-
+-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+-from the given SOURCEFILE.
+-
+-The output file name is determined by removing the directory component from
+-SOURCEFILE, then substituting the C source code suffix \`.c' with the
+-library object suffix, \`.lo'."
+-  ;;
+-
+-execute)
+-  $echo \
+-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+-
+-Automatically set library path, then run a program.
+-
+-This mode accepts the following additional options:
+-
+-  -dlopen FILE      add the directory containing FILE to the library path
+-
+-This mode sets the library path environment variable according to \`-dlopen'
+-flags.
+-
+-If any of the ARGS are libtool executable wrappers, then they are translated
+-into their corresponding uninstalled binary, and any of their required library
+-directories are added to the library path.
+-
+-Then, COMMAND is executed, with ARGS as arguments."
+-  ;;
+-
+-finish)
+-  $echo \
+-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+-
+-Complete the installation of libtool libraries.
+-
+-Each LIBDIR is a directory that contains libtool libraries.
+-
+-The commands that this mode executes may require superuser privileges.  Use
+-the \`--dry-run' option if you just want to see what would be executed."
+-  ;;
+-
+-install)
+-  $echo \
+-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+-
+-Install executables or libraries.
+-
+-INSTALL-COMMAND is the installation command.  The first component should be
+-either the \`install' or \`cp' program.
+-
+-The rest of the components are interpreted as arguments to that command (only
+-BSD-compatible install options are recognized)."
+-  ;;
+-
+-link)
+-  $echo \
+-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+-
+-Link object files or libraries together to form another library, or to
+-create an executable program.
+-
+-LINK-COMMAND is a command using the C compiler that you would use to create
+-a program from several object files.
+-
+-The following components of LINK-COMMAND are treated specially:
+-
+-  -all-static       do not do any dynamic linking at all
+-  -avoid-version    do not add a version suffix if possible
+-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+-  -export-symbols SYMFILE
+-		    try to export only the symbols listed in SYMFILE
+-  -export-symbols-regex REGEX
+-		    try to export only the symbols matching REGEX
+-  -LLIBDIR          search LIBDIR for required installed libraries
+-  -lNAME            OUTPUT-FILE requires the installed library libNAME
+-  -module           build a library that can dlopened
+-  -no-fast-install  disable the fast-install mode
+-  -no-install       link a not-installable executable
+-  -no-undefined     declare that a library does not refer to external symbols
+-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+-  -release RELEASE  specify package release information
+-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+-  -static           do not do any dynamic linking of libtool libraries
+-  -version-info CURRENT[:REVISION[:AGE]]
+-		    specify library version info [each variable defaults to 0]
+-
+-All other options (arguments beginning with \`-') are ignored.
+-
+-Every other argument is treated as a filename.  Files ending in \`.la' are
+-treated as uninstalled libtool libraries, other files are standard or library
+-object files.
+-
+-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+-only library objects (\`.lo' files) may be specified, and \`-rpath' is
+-required, except when creating a convenience library.
+-
+-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+-using \`ar' and \`ranlib', or on Windows using \`lib'.
+-
+-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+-is created, otherwise an executable program is created."
+-  ;;
+-
+-uninstall)
+-  $echo \
+-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+-
+-Remove libraries from an installation directory.
+-
+-RM is the name of the program to use to delete files associated with each FILE
+-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+-to RM.
+-
+-If FILE is a libtool library, all the files associated with it are deleted.
+-Otherwise, only FILE itself is deleted using RM."
+-  ;;
+-
+-*)
+-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+-  $echo "$help" 1>&2
+-  exit 1
+-  ;;
+-esac
++exit $exit_status
+ 
+-echo
+-$echo "Try \`$modename --help' for more information about other modes."
+ 
+-exit 0
++# The TAGs below are defined such that we never get into a situation
++# in which we disable both kinds of libraries.  Given conflicting
++# choices, we go for a static library, that is the most portable,
++# since we can't tell whether shared libraries were disabled because
++# the user asked for that or because the platform doesn't support
++# them.  This is particularly important on AIX, because we don't
++# support having both static and shared libraries enabled at the same
++# time on that platform, so we default to a shared-only configuration.
++# If a disable-shared tag is given, we'll fallback to a static-only
++# configuration.  But we'll never go from static-only to shared-only.
++
++# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
++build_libtool_libs=no
++build_old_libs=yes
++# ### END LIBTOOL TAG CONFIG: disable-shared
++
++# ### BEGIN LIBTOOL TAG CONFIG: disable-static
++build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
++# ### END LIBTOOL TAG CONFIG: disable-static
+ 
+ # Local Variables:
+ # mode:shell-script
+ # sh-indentation:2
+ # End:
++# vi:sw=2
++
diff --git a/debian/patches/series b/debian/patches/series
index 47ee6fc74..c03893297 100644
--- a/debian/patches/series
+++ b/debian/patches/series
@@ -15,6 +15,7 @@
 015_nxproxy_makefile-uninstall.patch
 016_nx-x11_install-location.patch
 017_nx-x11_update-autotools-helper-files.patch
+018_nx-x11_update-libtool-ltmain-script.patch
 101_nxagent_set-rgb-path.patch
 102_xserver-xext_set-securitypolicy-path.patch
 103_nxagent_set-X0-config-path.patch