aboutsummaryrefslogtreecommitdiff
path: root/nx-X11/config/cf/host.def
diff options
context:
space:
mode:
authorMike Gabriel <mike.gabriel@das-netzwerkteam.de>2015-04-22 00:37:47 +0200
committerMike Gabriel <mike.gabriel@das-netzwerkteam.de>2015-04-28 05:09:09 +0200
commit662a89545f3e953a47f176cf64e574350643d446 (patch)
treef718af7b85c4a17a28eb12f81922b1e3d1eb6481 /nx-X11/config/cf/host.def
parentc189f6efce2fe1b84c7792875b2805fa331ee84f (diff)
downloadnx-libs-662a89545f3e953a47f176cf64e574350643d446.tar.gz
nx-libs-662a89545f3e953a47f176cf64e574350643d446.tar.bz2
nx-libs-662a89545f3e953a47f176cf64e574350643d446.zip
imake cleanup: Drop references to X11 build-logic that is not present in nx-X11.
Diffstat (limited to 'nx-X11/config/cf/host.def')
-rw-r--r--nx-X11/config/cf/host.def125
1 files changed, 1 insertions, 124 deletions
diff --git a/nx-X11/config/cf/host.def b/nx-X11/config/cf/host.def
index 76318b4f8..28e36da82 100644
--- a/nx-X11/config/cf/host.def
+++ b/nx-X11/config/cf/host.def
@@ -136,18 +136,6 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $
#define BuildComposite YES
/*
- * If you only run the X server under xdm the X servers don't need to be
- * installed SetUID, and you may comment out the lines below. If you run
- * the servers by hand (with xinit or startx), then they do need to be
- * installed SetUID on most platforms.
- *
- * Consult your system administrator before making the X server setuid.
- *
-#define InstallXserverSetUID NO
- */
-
-
-/*
* Server configuration parameters. The defaults are shown here:
*/
@@ -196,48 +184,6 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $
*/
/*
- * There are three parameters that determine where and how the Matrox HAL
- * library is used:
- *
- * HaveMatroxHal -- You have the HALlib.a binary library installed
- * in xfree86/drivers/mga/HALlib, and you want it to
- * be used.
- * Default: NO
- *
- * BuildMatroxHal -- You have the source for the HALlib library (installed
- * in xfree86/drivers/mga/hallib), and want to build and
- * use it.
- * Default: NO
- *
- * UseMatroxHal -- You want to build support for loading/using the HAL
- * library into the mga driver. For module server builds
- * you don't need to have the HALlib library to do this.
- * but you want to build support for loading it and using
- * it into the mga driver module.
- * Default: YES for loadable server build
- * (HaveMatroxHal || BuildMatroxHal) for static
- */
-
-/*
- * To disable use of the Matrox HAL library, uncomment this:
- *
-#define UseMatroxHal NO
- */
-
-/*
- * If you have the HALlib.a binary installed in xfree86/drivers/mga/HALlib,
- * uncomment this:
- *
-#define HaveMatroxHal YES
- */
-
-/*
- * If you have the HALlib source code installed in xfree86/drivers/mga/hallib,
- * uncomment this:
-#define BuildMatroxHal YES
- */
-
-/*
* Include True Type Fonts to default font path. It is safe to do
* this by default as NX intaller carries only misc and TTF in the
* basic set of fonts installed under Windows.
@@ -263,24 +209,6 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $
#define BuildServersOnly YES
/*
- * By default, the sample config files for xinit, xdm and xfs are installed
- * only when there is no pre-existing version installed. Uncommenting the
- * following lines will force the sample versions to be installed even if
- * it means over-writing existing versions.
- *
-#define InstallXinitConfig YES
-#define InstallXdmConfig YES
- */
-
-/*
- * By default the application defaults files are always installed.
- * Uncommenting the the following will prevent exising application
- * defaults files from being over-written.
- *
-#define InstallAppDefFiles NO
- */
-
-/*
* Undefine the following if you don't want to have config files and
* app-defaults installed in a separate directory (i.e. /etc/X11).
*
@@ -558,13 +486,6 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $
*/
#define BuildXF86RushLibrary NO
-/*
- * We should never need LBX in a NX enabled environment...
- *
-#define BuildLBX NO
- */
-#define BuildLBX NO
-
#define BuildXKB YES
#define BuildXKBlib YES
@@ -619,7 +540,7 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $
/*
* To build static and shared libraries with debugging information, uncomment
* this. Assumes you have Gcc2.
- * (If you don't have Gcc2, you can use the DebugLib{X11,Xt,Xaw,...} variables
+ * (If you don't have Gcc2, you can use the DebugLib{X11,...} variables
* to build debugging versions of the libraries separately.)
*
#define DebuggableLibraries YES
@@ -720,51 +641,7 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $
#define X86EMU_LIBPATH /usr/local/lib
*/
-
-/*
- * Most platforms default to using an already installed Expat library.
- * To use the one included in this release instead, uncomment the following.
- *
-#define HasExpat NO
- */
-#define HasExpat YES
-
-/*
- * To use a Expat library already installed outside the default search
- * paths, uncomment the following and set the path as needed.
-#define HasExpat YES
-#define ExpatDir /usr/local
- */
-
-
-/*
- * Most platforms default to using an already installed PNG library.
- * To use the one included in this release instead, uncomment the following.
- *
-#define HasLibpng NO
- */
-
-/*
- * To use a PNG library already installed outside the default search
- * paths, uncomment the following and set the path as needed.
-#define HasLibpng YES
-#define LibpngDir /usr/local
- */
-
-
-/*
- * Most platforms default to using an already installed xterm program.
- * To use the one included in this release instead, uncomment the following.
- *
-#define BuildXterm YES
- */
-
#define SharedLibXau YES
-#define SharedLibXdmcp YES
-
-#define BuildXaw7 NO
-
#define BuildRman NO
-#define BuildXcursorLibrary NO
#define BuildLoadableXlibI18n NO