massive reduction of unneeded files

1 files changed, 0 insertions, 444 deletions

diff --git a/nx-X11/config/cf/sequent.cf b/nx-X11/config/cf/sequent.cf
deleted file mode 100644
index 99ba9b461..000000000
--- a/nx-X11/config/cf/sequent.cf
+++ /dev/null
@@ -1,444 +0,0 @@
-XCOMM platform:  $XConsortium: sequent.cf$
-
-/*
- * SET VERSION NUMBERS BEFORE MAKING MAKEFILES; also, you'll need to install
- * util/scripts/bsdinstall.sh before doing a "make install"
- */
-
-/*
- * Version numbers are set one of two ways:
- *
- * If the target version is different than the machine you are building on,
- * set the target versions using the environmental variable IMAKEINCLUDES.
- * Example: IMAKEINCLUDES="-I. -DOSMajorVersion=4 -DOSMinorVersion=4"
- * This is usually only done at Sequent when building a product using
- * cross compiling tools and target headers and libraries.
- *
- * Otherwise, the imake will use uname(2) to calculate the default to be
- * the same as the machine you are building on.  The X11R6 imake will set
- * DefaultOS*Version macros to be these default values.
- * Those default values will be used in the assignments below.
- * This is the recommended method to be used by customers.
- */
-
-				/* defaults from imake via uname(2) */
-#ifndef OSName
-#define OSName			DefaultOSName
-#endif
-#ifndef OSMajorVersion
-#define OSMajorVersion		DefaultOSMajorVersion
-#endif
-#ifndef OSMinorVersion
-#define OSMinorVersion		DefaultOSMinorVersion
-#endif
-#ifndef OSTeenyVersion
-#define OSTeenyVersion		DefaultOSTeenyVersion
-#endif
-XCOMM operating system:  OSName V/**/OSMajorVersion./**/OSMinorVersion./**/OSTeenyVersion
-
-/*
- * Sequent Dynix/PTX 4.x.x (SVR4) and later operating systems.
- *
- * Sequent Dynix/PTX 4.2.3 and later operating systems are supported with
- * the X11R6 sequent.cf and other X11R6 configuration files.
- * Specifically 4.4.2 and later have been tested.
- *
- * Attempting to use these X11R6 configuration files and X11R6 source files
- * with early versions of Dynix/PTX 4.x.x may work, however that will not be
- * tested or supported at Sequent.
- * Sequent Dynix/PTX 2.1.x has been retired so support for it and earlier
- * releases has been removed.
- */
-
-#if OSMajorVersion >= 4
-
-#define SystemV4		YES
-#define SequentVersionDefines	-DSVR4
-#define ExtraLibraries		
-#define ForceNormalLib		YES
-#define HasRequiredLibs		YES
-#define NeedBerklib		NO	/* gettimeofday in libc */
-
-#define XmExtraLibraries	/* for ABI-compliance do not use -lgen here */
-#define MotifDefines		-DXM_STRINGS_1_2_2_STATE  /* code review */
-
-/* initial port does not use multiple socket libs, default libsocket.so.1.1 */
-#define HasMultipleSockets	NO	/* obsolete */ /* only libsocket.so.1.1 */
-
-#endif /* OSMajorVersion >= 4 */
-
-/*
- * Below this line are generic defines that apply to all Sequent systems.
- * However they are currently tested with only OSMajorVersion >= 4
- */
-
-/*
- * The following cpp macro defines are order independent,
- * since the right-hand-side is constant.
- * Therefore these are simply listed in alphabetical order.
- * Macros defined later may use these definitions.
- */
-
-/* 
- * Threads.tmpl cpp macros.
- * Sequent overrides the Threads.tmpl defaults with the values below.
- * Sequent has native threads for ptx 4.5.0 and higher.
- */
-
-#if ( OSMajorVersion >= 5 || (OSMajorVersion == 4 && OSMinorVersion >= 5) )
-
-#define HasPosixThreads			YES
-#define HasThreadSafeAPI		YES
-#define ThreadedX			YES
-#define ThreadsLibraries		/**/
-#define ThreadsCplusplusLibraries	/**/
-#define ThreadPreStdAPIDefines		/**/
-#define ThreadsCompileFlags		-Kthread
-#define ThreadsCplusplusCompileFlags	-Kthread
-#define SharedThreadReqs		/**/
-
-/*
- * THREADS macro and environment variable used with Sequent commands only.
- * We use THREADS rather than the generic X11 THREADS_CFLAGS because we 
- * want to ensure that the macro is defined for all compiles and not just
- * those Makefiles built from a Imakefile that includes Threads.tmpl.
- *
- * Sequent compiler option -Kthread will also define -D_SEQUENT_THREADS.
- * Currently using -Kthread is the recommended interface to this define.
- * Currently there are no extra includes files using -D_SEQUENT_THREADS.
- * Currently no reason for makedepend or cpp to use -D_SEQUENT_THREADS.
- * If needed in the future, we would add to ProjectThreadsDefines
- *
- * #define ProjectThreadsDefines -DXTHREADS -D_SEQUENT_THREADS
- */
-
-  THREADS = -Kthread
-
-#endif /* ptx 4.5.0 or greater has threads */
-
-/* 
- * Imake.tmpl cpp macros.
- * Sequent overrides the Imake.tmpl defaults with the values below.
- */
-
-#define BuildLibPathVar		LD_LIBRARY_PATH
-#define DefaultCCOptions	-Xa
-#define ExpandManNames		YES
-#define ExtraFilesToClean	*.z
-#define HasNdbm			YES
-#define HasShadowPasswd		YES
-#define HasSockets		YES	/* default */
-#define HasVarDirectory		NO
-#ifdef UseInstalled
-#define InstallCmd $(BINDIR)/ptxinst -t "$(TOOLS)"
-#else
-#define InstallCmd $(SHELL) $(SCRIPTSRC)/ptxinst.sh
-#endif /* UseInstalled */
-#define InstPgmFlags		-s -m 0555 -o bin -g bin
-#define InstBinFlags		-s -m 0555 -o bin -g bin
-#define InstLibFlags		-m 0444 -o bin -g bin
-#define InstShLibFlags		-m 0555 -o bin -g bin
-#define Malloc0ReturnsNull	YES
-#define ManSuffix	1		/* use just one tab or cpp will die */
-#define LibManSuffix	3x		/* use just one tab or cpp will die */
-#define LibmanDir	$(MANSOURCEPATH)3
-#define MiscManSuffix	5x		/* use just one tab or cpp will die */
-#define MiscManDir	$(MANSOURCEPATH)5
-#define MkdirHierCmd		mkdir -p
-#define NeedConstPrototypes     YES
-#define NeedFunctionPrototypes  YES
-#define NeedNestedPrototypes    YES
-#define NeedVarargsPrototypes   YES
-#define StripInstalledPrograms	YES
-#define SystemManDirectory	/usr/catman
-#define TermcapLibrary		-lcurses	/* code review for SVR4 ? */
-#define TerminfoDir		/usr/lib/terminfo	/* Sequent addition */
-#define ToolkitStringsABIOptions -intelabi
-
-
-/* 
- * X11.tmpl cpp macros.
- * Sequent overrides the X11.tmpl defaults with the values below.
- */
-
-#define BuildDps		YES
-#define BuildServer		YES
-#define BuildXF86DGA		NO	/* DGA has no meaning on Sequent HW */
-#define BuildXF86MiscExt	NO	/* turn off the server portion */
-#define BuildXF86VidModeExt	NO	/* turn off the server portion */
-#define BuildXInputExt		YES
-#define BuildXKBuilib		YES	/* override NO set in xorg.cf */
-#define ConnectionFlags		-DTCPCONN
-#define DefaultSystemPath	/bin:/etc:/usr/bin:$(BINDIR)
-#define DefaultUserPath		:/bin:/usr/bin:$(BINDIR)
-#define HasPlugin		YES
-#define HasXServer		NO
-#define InstallFSConfig		YES	/* safe since we install to DESTDIR */
-#define InstallXdmConfig	YES	/* safe since we install to DESTDIR */
-#define MotifBC			NO	/* default, code review from X11R5  */
-#define XdmServersType	fs	/* One tab here.  Needed if BuildServer YES */
-#define XtMalloc0ReturnsNullDefines Malloc0ReturnsNullDefines -DXTMALLOC_BC
-#define XprtServer		YES
-#define XVirtualFramebufferServer	YES
-#define XF86SVGAServer		NO	/* Don't build the XFree86 servers */
-#define XF86S3Server		NO
-#define XF86S3VServer		NO
-#define XF86I8514Server		NO
-#define XF86Mach8Server		NO
-#define XF86Mach32Server	NO
-#define XF86Mach64Server	NO
-#define XF86P9000Server		NO
-#define XF86AGXServer		NO
-#define XF86I128Server		NO
-#define XF86GLINTServer		NO
-#define XF86REALimageServer	NO
-
-/* 
- * Motif.tmpl cpp macros.
- * Sequent overrides the Motif.tmpl default with the values below.
- */
-
-#define GencatCmd             /usr/lbin/gencat
-
-/* Port Sequent macro DontBuildMotifConfig to Motif 2.1 */
-/*
- * #ifndef MetroLink
- * #define DontBuildMotifConfig
- * #endif
- */
-
-/* 
- * Sequent added cpp macros.
- * 
- * The following cpp macro defines have been introduced by Sequent.
- * They will be referenced in Sequent patches sent to TOG.
- * They may be moved above if accepted by TOG or X.org.
- */
-
-#define AdminBaseDir		  /usr/admin.ptx/etc/base.dir
-#define MessageCatDir		  /usr/lib/message/C
-#define NeedXinputAlias		  YES
-#define UseHidesymsLists	  YES
-#define XlbiffMailPath		  /usr/mail/%s	/* used by contrib xlbiff */
-
-/* 
- * Imake.tmpl, X11.tmpl, or other order dependent cpp defines.
- *
- * The following cpp macro defines are order dependent.
- * They depend on previously defined cpp macros.
- * Do not change the order.
- */
-#define SharedLibraryCCOptions	DefaultCCOptions
-#define StandardDefines		SequentVersionDefines -DOSMAJORVERSION=OSMajorVersion -DOSMINORVERSION=OSMinorVersion -DANSICPP -DDYNIX_C2 -DMetroLink
-#define StandardCppDefines	StandardDefines -D_SOCKET_VERSION=11 -DUnixCpp
-
-#ifdef ProjectRoot
-#define ManDirectoryRoot	ProjectRoot/**//catman
-#else
-#define ManDirectoryRoot	SystemManDirectory
-#endif
-#define XmanSearchPath		ManDirectoryRoot /* for X11R5 xman */
-
-/* 
- * Sequent configuration environment specific to building X11 and Motif.
- * This environment is only available when UseInstalled is not defined.
- * Therefore this environment is not used by customers using xmkmf.
- */
-
-#ifndef UseInstalled
-
-/* Product builds using local X11 and Motif trees */
-
-/*
- * Provide libraries needed by nonX programs in the X11 build tree.
- * These are not standard so the customer will be forced to add them to their
- * Imakefile SYS_LIBRARIES if needed.  An ABI program may not want or need them,
- * so we do not include them in the ExtraLibraries provided to customers
- * when UseInstalled is defined.  We add them here as a convenience when
- * building the entire X11 tree (at Sequent or the contractor).
- */
-#undef ExtraLibraries
-#define ExtraLibraries	-lsocket -lnsl
-
-/*
- * Sequent builds X11 and Motif in the same tree.
- * The Motif project files include the X11 project files.
- *
- * Later we may use the Local project files similer the the lynx.cf
- *
- * #define LocalTmplFile		<Motif.tmpl>
- * #define LocalRulesFile		<Motif.rules>
- */
-
-/* Try the Metro Link method. */
-
-#ifndef MetroLink
-#undef ProjectTmplFile
-#define ProjectTmplFile		<Motif.tmpl>
-#undef ProjectRulesFile
-#define ProjectRulesFile	<Motif.rules>
-#endif
-
-/*
- * Later change to Metro Link directory layout,
- * or allow $(TOP)/../motif21
- */
-
-/* Try the Metro Link method. */
-
-#ifndef MetroLink
-#define MTop $(TOP)/motif21
-#endif
-
-/*
- * Set the Program macros to be correct for the target machine.
- * This will avoid using any crosstools as hardwired strings
- * built into binaries that will run on the target machine.
- *
- * These macro names need to be ported from X11R5 to X11R6.
- */
-#define ArProgramBase	ar
-#define CppProgram	/lib/cpp
-#define CcProgram	cc
-#define RanlibProgram	ranlib
-
-/*
- * Build all the X11 debug libaries *_d.a for use by Sequent Service
- */
-
-/*
- * Set DebugLibDefault YES for Sequent to build all debug libs.
- * If we move this to generic code to *.tmpl files,
- * use the default code below that sets the default NO
- */
-
-#define DebugLibDefault		NO
-
-#ifndef DebugLibDefault
-#define DebugLibDefault		NO
-#endif
-
-#define DebugLibX11		DebugLibDefault	/* debugged X library */
-#define DebugLibXext		DebugLibDefault	/* debugged Xext library */
-#define DebugLibXau		DebugLibDefault	/* debugged auth library */
-#define DebugLibXdmcp		DebugLibDefault	/* debugged XDMCP library */
-#define DebugLibXmu		DebugLibDefault	/* debugged Xmu library */
-#define DebugLibXp              DebugLibDefault	/* debugged Xp library */
-#define DebugLibXt		DebugLibDefault	/* debugged toolkit library */
-#define DebugLibXa		DebugLibDefault	/* debugged audio library */
-#define DebugLibXaw		DebugLibDefault	/* debugged widget library */
-#define DebugLibXi		DebugLibDefault	/* debugged Xi library */
-#define DebugLibXtst		DebugLibDefault	/* debugged Xtst library */
-#define DebugLibICE		DebugLibDefault	/* debugged ICE library */
-#define DebugLibSM		DebugLibDefault	/* debugged SM library */
-#define DebugLibXkey		DebugLibDefault	/* debugged Xkey library */
-#define DebugLibFS		DebugLibDefault	/* debugged FS library */
-
-/*
- * Build all the Motif debug libaries *_d.a for use by Service
- */
-#define DebugLibXm		DebugLibDefault
-#define DebugLibMrm		DebugLibDefault
-#define DebugLibUil		DebugLibDefault
-
-/*
- * Build all the Adobe DPS debug libaries *_d.a for use by Service
- */
-#define DebugLibDps		DebugLibDefault
-
-#endif /* ! UseInstalled */
-
-/*
- * Sequent general make macros.
- * X11R6.5 should migrate these to Imake.tmpl.
- */
-
-XCOMM Sequent general make macros.
-
-#ifndef PackCmd
-#define PackCmd pack
-#endif
-            PACK = PackCmd
-
-/*
- * Sequent unique make macros.  These will always be unique to Sequent.
- * We introduce them here in sequent.cf since cpp macros are set in sequent.cf.
- * We may later move them to sequentLib.tmpl.
- */
-
-XCOMM Sequent unique make macros.
-
-     ADMINBASEDIR = AdminBaseDir
-    MESSAGECATDIR = MessageCatDir
-
-/*
- * DPS default values (unique to sequent)
- */
-#ifndef PswrapCmd
-#define PswrapCmd     pswrap
-#endif
-
-#ifdef UseHidesymsLists
-
-#ifndef HidesymsCmd
-#define HidesymsCmd /usr/lib/hidesyms/hidesyms
-#endif
-#ifndef HsAcppCmd
-#define HsAcppCmd /lib/acpp
-#endif
-/*
- * When building in the X11 tree.
- * For shared libs,   hidesyms executes in a subdir.
- * For unshared libs, hidesyms executes in a subsubdir.
- * Therefore we add both of these to the acpp path:
- * ../../$(BUILDINCROOT)/lib/hidesyms:../$(BUILDINCROOT)/lib/hidesyms
- */
-#ifndef HsAcppLocalPath
-# define HsAcppLocalPath ../../$(BUILDINCROOT)/lib/hidesyms:../$(BUILDINCROOT)/lib/hidesyms
-#endif
-#ifndef HsAcppSystemPath
-# define HsAcppSystemPath /usr/lib/hidesyms
-#endif
-#ifndef HsAcppPath
-# ifdef UseInstalled
-# define HsAcppPath HsAcppSystemPath
-# else
-# define HsAcppPath HsAcppLocalPath:HsAcppSystemPath
-# endif /* UseInstalled */
-#endif
-/* 
- * note: -DABI_SHARED_OBJECT requires a temporary fix added to 
- * Xt/Error.c to provide missing _abi_* routines not in libc.so.1.
- * When the base adds those missing _abi_* to libc.so.1,
- * then the code in Xt/Error.c can be removed and the corresponding
- * symbols added to Xt/libXt.hs can be removed.
- */
-#ifndef HsAcppDefines
-#define HsAcppDefines -DABI_SHARED_OBJECT -D_SOCKET_VERSION=11 $(THREADS_DEFINES)
-#endif
-
-/*
- * For shared libs, hidesyms executes in a subdir,
- * therefore we add a -L../$(BUILDLIBDIR)
- */
-#ifndef LdPreLib
-#ifndef UseInstalled
-#define LdPreLib -L$(BUILDLIBDIR) -L../$(BUILDLIBDIR)
-#endif
-#endif
-
-XCOMM HIDESYMS is for filtering system library symbols.
-
-         HIDESYMS = HidesymsCmd
-       HSACPPPATH = HsAcppPath
-        HSACPPCMD = HsAcppCmd
-    HSACPPDEFINES = HsAcppDefines
-           HSACPP = $(HSACPPCMD) -Y $(HSACPPPATH) $(HSACPPDEFINES)
-            HSCMD = $(HIDESYMS) -z -p "$(HSACPP)"
-
-#endif /* UseHidesymsLists */
-
-#if OSMajorVersion >= 4
-#include <xorg.cf>
-#include <sequentLib.rules>	/* include after macros, before Motif.rules */
-#endif /* OSMajorVersion >= 4 */