nx-X11/config/cf: Drop unnecessary xf86site.def, xf86.tmpl, xfree86.cf.

1 files changed, 0 insertions, 479 deletions

diff --git a/nx-X11/config/cf/xf86site.def b/nx-X11/config/cf/xf86site.def
deleted file mode 100644
index 6f0961252..000000000
--- a/nx-X11/config/cf/xf86site.def
+++ /dev/null
@@ -1,479 +0,0 @@
-XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $
-/******************************************************************************/
-/*
- * This file is to provide a quick method for most people to change the
- * behaviour of their XFree86 installation without having to fully
- * understand the workings of site.def and all the various '.cf' files.
- *
- * In the vast majority of cases, it should not be necessary to use this
- * file at all or change it in any way.
- *
- * This file is divided into two sections.  The first contains settings
- * that end-users might reasonably change.  The second contains settings
- * that developers might want to change.
- *
- * IMPORTANT NOTE:  In all cases changing the defaults may cause problems
- * and/or unexpected side-effects.  If you don't understand what a setting
- * does, then it's best to not change it.  If you make changes and have
- * problems, verify that those problems are also present when using an
- * empty host.def file and unchanged version of this file before reporting
- * them.
- *
- * A good way to use this file is to copy it to host.def, and make the
- * changes there.  That way, future patches to this file won't fail.
- * The host.def file will never be patched.
- *
- * The distributed version of this file MUST contain no uncommented
- * definitions.  Default definitions belong in xfree86.cf, or <vendor>.cf
- * files.
- */
-/******************************************************************************/
-
-/*
- * If you have build-specific modifications in your host.def file, but
- * want an empty host.def file installed when doing 'make install',
- * uncomment the following
- *
-#define InstallEmptyHostDef
- */
-
-/*
- * Which servers to build.  There is now only one XFree86 server.
- * It can be disabled by the following.
- *
-#define XF86Server		NO
- */
-
-/*
- * Set the default server (ie the one that gets the sym-link to "X")
- *
-#define ServerToInstall		XFree86
- */
-
-/*
- * Server configuration parameters.  The defaults are shown here:
- */
-
-/*
- * Which drivers to build.  When building a static server, each of these
- * will be included in it.  When building the loadable server each of these
- * modules will be built.
- *
-#define XF86CardDrivers		mga glint nv tga s3virge sis rendition \
-				neomagic i740 tdfx savage \
-				cirrus vmware tseng trident chips apm \
-				GlideDriver fbdev i128 \
-				ati AgpGartDrivers DevelDrivers ark cyrix \
-				siliconmotion \
-				vesa vga XF86OSCardDrivers XF86ExtraCardDrivers
- */
-
-/*
- * To add third party drivers to the standard driver list, set the
- * following.
- *
-#define XF86ExtraCardDrivers	extradriver1 extradriver2 ...
- */
-
-/*
- * Select the XInput devices you want by uncommenting this.
- *
-#define XInputDrivers		mouse keyboard acecad calcomp citron \
-				digitaledge dmc dynapro elographics \
-				microtouch mutouch penmount spaceorb summa \
-				wacom void magictouch aiptek
- */
-
-/*
- * To build only the servers with a cut-down source tree, uncomment
- * this.
- *
-#define BuildServersOnly	YES
- */
-
-/*
- * Undefine the following if you don't want to have config files and
- * app-defaults installed in a separate directory (i.e. /etc/X11).
- *
-#define UseSeparateConfDir NO
- */
-
-/* 
- * To enable building the glide driver, you need to define 
- * HasGlide2 to YES and set the Glide2IncDir variable. 
- * HasGlide2 is per default NO.
- *
-#define HasGlide2 YES
- */
-
-/*
- * Set the path to your Glide include files.
- *
-#define Glide2IncDir /usr/include/glide
- */
-
-/* 
- * Have glide 3?
- *
-#define HasGlide3 YES
- */
-
-/*
- * Set the path to your Glide 3 include files.
- *
-#define Glide3IncDir /usr/include/glide3
- */
-
-
-
-/*
- * Unless you're a developer you shouldn't need to change anything
- * beyond this point.
- */
-
-/*
- * If you want to enable some developer settings, like more verbose
- * compiler warnings, uncomment this.
- *
-#define XFree86Devel	YES
-*/
-
-/*
- * The default optimisation flags for GCC 2.x.  -fno-strength-reduce is
- * here to work around a bug in -O2 for GCC 2.x on i386 platforms.
- * If you are using a version that doesn't have this bug, you can
- * uncomment the following line, and remove '-fno-strength-reduce'
- * If you are building binaries for a 486, it may be beneficial to add
- * -m486
- *
-#define DefaultGcc2i386Opt	-O2 -fno-strength-reduce
- */
-
-/*
- * This allows the GCC warning flags to be set.  The default is shown here.
- *
-#define GccWarningOptions -Wall -Wpointer-arith -Wstrict-prototypes \
-                          -Wmissing-prototypes -Wmissing-declarations \
-                          -Wredundant-decls -Wnested-externs
- */
-
-/* 
- * Sun Compiler stuff.. 
- *
-#define HasSunC                         YES
-#define HasSunCplusplus                 YES
-#define CplusplusCompilerMajorVersion   5
-#define CplusplusCompilerMinorVersion   0
-#define CCompilerMajorVersion           5
-#define CCompilerMinorVersion           0
- */
-
-/*
- * Optimized Sun Compiler Build.
- *
-#define DefaultCDebugFlags              -xO4 -xtarget=pentium_pro
-#define OptimizedCDebugFlags            -xO4 -xtarget=pentium_pro
- */
-
-/* 
- * Debuggable Sun Compiler Build. 
- * Note: This builds _EVERYTHING_ as debuggable
- *
-#define DefaultCDebugFlags              -g -xs
-#define OptimizedCDebugFlags            -g -xs
- */
-
-/*
- * For Linux, this should match the Binutils version you have.  This example
- * is for 2.6.0.7.  See linux.cf for the default setting.
- *
- * This should automatically get set correctly by imake.
- *
-#define LinuxBinUtilsMajorVersion	26
- */
-
-/*
- * For Linux, these should match the libc version you have.  This example
- * is for libc.5.4.x.  See linux.cf for the default setting.
- *
- * This should automatically get set correctly by imake.
- *
-#define LinuxCLibMajorVersion	5
-#define LinuxClibMinorVersion	4
- */
-
-/*
- * If you want to use the GNU malloc library, uncomment this
- *
-#define UseGnuMalloc		YES
- */
-
-/*
- * Set this to whatever is required to access the GNU malloc library.
- * The default is '-lgmalloc' unless is specified in the OS's .cf file.
- *
-#define GnuMallocLibrary	-L/usr/local/lib -lgmalloc
- */
-
-/*
- * To enable the internal Xserver malloc, uncomment this
- *
-#define UseInternalMalloc	YES
- */
-
-/*
- * Some Linux releases don't have a libtermcap.  In this case you may need
- * to uncomment the following
- *
-#define TermcapLibrary		-lncurses
- */
-
-/*
- * Build a server that dynamically loads the modules by setting
- * this to YES.  This defaults to YES on most platforms.  A static server
- * can be built by setting this to NO.
- *
-#define DoLoadableServer	NO
- */
-
-/*
- * Build dlopen() style modules instead of the standard loader modules.
- * Don't enable this unless you have specific development reasons for
- * doing so and understand how to deal with the problems you'll run in to.
- *
- * Enabling this for regular use is NOT supported, and will almost
- * certainly cause you problems.
- *
-#define MakeDllModules		YES
- */
-
-/*
- * Build XAA.  This can be disabled with:
- *
-#define XF86XAA			NO
- */
-
-/*
- * Build vgahw.  This can be disabled with:
- *
-#define XF86VgaHw		NO
- */
-
-/*
- * Build xf1bpp.  This can be disabled with:
- *
-#define XF1Bpp			NO
- */
-
-/*
- * Build xf4bpp.  This can be disabled with:
- *
-#define XF4Bpp			NO
- */
-
-
-/*
- * BSD Console driver support (for FreeBSD and NetBSD).
- *
- * By default, support is included for pccons and pcvt for NetBSD, and
- * pccons, syscons and pcvt for FreeBSD.
- *
- * To change the list of supported drivers, set the following parameter.
- * Possible values are -DPCCONS_SUPPORT, -DSYSCONS_SUPPORT, -DPCVT_SUPPORT.
- * The following example includes support for syscons and pcvt only.
- *
-#define XFree86ConsoleDefines	-DSYSCONS_SUPPORT -DPCVT_SUPPORT
- */
-
-/*
- * To disable building XInput support, uncomment this
- *
-#define BuildXInputExt		NO
- */
-
-/*
- * Uncomment this for joystick support.
- *
- * Note: Joystick support is broken, so don't enable this.
- *
-#define JoystickSupport YES
- */
-
-/*
- * To disable the ScreenSaver Extension, uncomment this line.
- *
-#define BuildScreenSaverExt	NO
- */
-
-/* 
- * If you don't want to build Xinerama support, uncomment this.
- *
-#define BuildXinerama		NO
- */
-
-/*
- * If you don't want to build support for the GLX extension, uncomment this.
- *
-#define BuildGlxExt             NO
- */
-
-/*
- * If you want to build the xf86rush extension, uncomment this line.
- * This isn't recommended.
- *
-#define BuildXF86RushExt	YES
- */
-
-/*
- * If you want to build the client library for the xf86rush extension,
- * uncomment this line.  This isn't recommended.
- *
-#define BuildXF86RushLibrary	NO
- */
-
-/*
- * If you are running NetBSD 0.9C or later, and have the aperture driver
- * installed, uncomment this.
- *
-#define HasNetBSDApertureDriver	YES
- */
-
-/*
- * If you are running SVR3 and have the mmap driver installed (for linear
- * framebuffer access) uncomment this.
- *
-#define HasSVR3mmapDrv	YES
- */
-
-/*
- * If you are using an SVR3 (like ISC 4.x) which supports long file names,
- * you can * uncomment this to have manual pages installed under their
- * full names
- *
-#define ExpandManNames		YES
- */
-
-/*
- * For a POSIXized build on Interactive uncomment this
- * Could be used with gcc 'till Version 2.6.3
- * Should be used with gcc 2.7.2. 
- *
-#define UsePosix		YES
- */
-
-/*
- * If you want XDMAUTH support (if you have Wraphelp.c), uncomment this.
- *
-#define HasXdmAuth		YES
- */
-
-/*
- * If you have Linux DECnet support, and want to build XFree86 with support
- * for connections over DECnet, uncomment this.
- *
-#define HasDECnet		YES
- */
-
-/*
- * To build static and shared libraries with debugging information, uncomment
- * this. Assumes you have Gcc2.
- * (If you don't have Gcc2, you can use the DebugLib{X11,...} variables
- * to build debugging versions of the libraries separately.)
- *
-#define DebuggableLibraries	YES
-*/
-
-/*
- * To forceably build static libraries in addition to shared libraries,
- * uncomment this.
- *
-#define ForceNormalLib		YES
- */
-
-/*
- * Uncomment this if your default tools (eg, gcc, ld, as, etc) are
- * not the Linux ELF versions.
- *
-#define LinuxElfDefault		NO
- */
-
-/*
- * To use ELF format shared libraries for supported OSs, uncomment this.
- *
- * For Linux the default setting of this is the same as the setting of
- * LinuxElfDefault.
- *
- * For FreeBSD this should automatically be set correctly by imake.  Only
- * change it here if you need to override the automatic setting.
- *
-#define UseElfFormat		YES
- */
-
-/*
- * For FreeBSD/ELF (FreeBSD 3.0) it is possible to also build and install
- * a.out compatibility libraries.  To enable that, uncomment this.
- *
-#define BuildAoutLibraries	YES
- */
-
-/*
- * If you have trouble with make bombing out in Xlib, try uncommenting this.
- * You will not get dependencies as a result, but better than nothing.
- *
-#define MakeHashTableBug        YES
- */
-
-/*
- * If you do not want your man pages compress under SVR3 systems that
- * support it, uncomment this.
- *
-#define CompressManPages        NO
- */
-
-/*
- * If you have sgmlfmt (the XFree86 doctools package) and want to build
- * formatted docs from the SGML source, uncomment this.
- *
-#define HasSgmlFmt		YES
- */
-
-/*
- * To disable building some document formats, uncomment some of these.
- *
-#define BuildLinuxDocText	NO
-#define BuildLinuxDocHtml	NO
-#define BuildLinuxDocPS		NO
- */
-
-/*
- * To install Japanese versions of the documentation uncomment this.
- * Note: The Japanese documentation consists of a subset of the
- * XFree86 3.1 docs.
- *
-#define InstallJapaneseDocs	YES
- */
-
-/*
- * To build/install X specs docs, uncomment the following.
- * The SpecsDocDirs setting here is recommended because it covers
- * the docs that XFree86 has changed or added.
- *
-#define BuildSpecsDocs		YES
-#define SpecsDocDirs		CTEXT GL ICCCM X11 Xext Xmu Xv XvMC i18n
- */
-
-/*
- * To build all specs docs, not just those listed in SpecsDocDirs, uncomment
- * the following.
- *
-#define BuildAllSpecsDocs	YES
- */
-
-/*
- * If your system doesn't support vm86() mode and you have
- * libx86emu set library path here
- *
-#define X86EMU_LIBPATH /usr/local/lib
- */ 
-
-