Imported nx-X11-3.1.0-1.tar.gznx-X11/3.1.0-1

Summary: Imported nx-X11-3.1.0-1.tar.gz
Keywords:

Imported nx-X11-3.1.0-1.tar.gz
into Git repository

41 files changed, 11898 insertions, 0 deletions

diff --git a/nx-X11/extras/zlib/ChangeLog b/nx-X11/extras/zlib/ChangeLog
new file mode 100644
index 000000000..b844155a5
--- /dev/null
+++ b/nx-X11/extras/zlib/ChangeLog
@@ -0,0 +1,481 @@
+
+		ChangeLog file for zlib
+
+Changes in 1.1.4 (11 March 2002)
+- ZFREE was repeated on same allocation on some error conditions.
+  This creates a security problem described in
+  http://www.zlib.org/advisory-2002-03-11.txt
+- Returned incorrect error (Z_MEM_ERROR) on some invalid data
+- Avoid accesses before window for invalid distances with inflate window
+  less than 32K.
+- force windowBits > 8 to avoid a bug in the encoder for a window size
+  of 256 bytes. (A complete fix will be available in 1.1.5).
+	
+Changes in 1.1.3 (9 July 1998)
+- fix "an inflate input buffer bug that shows up on rare but persistent
+  occasions" (Mark)
+- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
+- fix gzseek(..., SEEK_SET) in write mode
+- fix crc check after a gzeek (Frank Faubert)
+- fix miniunzip when the last entry in a zip file is itself a zip file
+  (J Lillge)
+- add contrib/asm586 and contrib/asm686 (Brian Raiter)
+  See http://www.muppetlabs.com/~breadbox/software/assembly.html
+- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
+- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
+- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
+- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
+- added a FAQ file
+
+- Support gzdopen on Mac with Metrowerks (Jason Linhart)
+- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart)
+- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young)
+- avoid some warnings with Borland C (Tom Tanner)
+- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant)
+- emulate utime() for WIN32 in contrib/untgz  (Gilles Vollant)
+- allow several arguments to configure (Tim Mooney, Frodo Looijaard)
+- use libdir and includedir in Makefile.in (Tim Mooney)
+- support shared libraries on OSF1 V4 (Tim Mooney)
+- remove so_locations in "make clean"  (Tim Mooney)
+- fix maketree.c compilation error (Glenn, Mark)
+- Python interface to zlib now in Python 1.5 (Jeremy Hylton)
+- new Makefile.riscos (Rich Walker)
+- initialize static descriptors in trees.c for embedded targets (Nick Smith)
+- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith)
+- add the OS/2 files in Makefile.in too (Andrew Zabolotny)
+- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane)
+- fix maketree.c to allow clean compilation of inffixed.h (Mark)
+- fix parameter check in deflateCopy (Gunther Nikl)
+- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler)
+- Many portability patches by Christian Spieler:
+  . zutil.c, zutil.h: added "const" for zmem*
+  . Make_vms.com: fixed some typos
+  . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists
+  . msdos/Makefile.msc: remove "default rtl link library" info from obj files
+  . msdos/Makefile.*: use model-dependent name for the built zlib library
+  . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc:
+     new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT)
+- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane)
+- replace __far with _far for better portability (Christian Spieler, Tom Lane)
+- fix test for errno.h in configure (Tim Newsham)
+
+Changes in 1.1.2 (19 March 98)
+- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant)
+  See http://www.winimage.com/zLibDll/unzip.html
+- preinitialize the inflate tables for fixed codes, to make the code
+  completely thread safe (Mark)
+- some simplifications and slight speed-up to the inflate code (Mark)
+- fix gzeof on non-compressed files (Allan Schrum)
+- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs)
+- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn)
+- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny)
+- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori)
+- do not wrap extern "C" around system includes (Tom Lane)
+- mention zlib binding for TCL in README (Andreas Kupries)
+- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert)
+- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson)
+- allow "configure --prefix $HOME" (Tim Mooney)
+- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson)
+- move Makefile.sas to amiga/Makefile.sas
+
+Changes in 1.1.1 (27 Feb 98)
+- fix macros _tr_tally_* in deflate.h for debug mode  (Glenn Randers-Pehrson)
+- remove block truncation heuristic which had very marginal effect for zlib
+  (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
+  compression ratio on some files. This also allows inlining _tr_tally for
+  matches in deflate_slow.
+- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
+
+Changes in 1.1.0 (24 Feb 98)
+- do not return STREAM_END prematurely in inflate (John Bowler)
+- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
+- compile with -DFASTEST to get compression code optimized for speed only
+- in minigzip, try mmap'ing the input file first (Miguel Albrecht)
+- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain
+  on Sun but significant on HP)
+
+- add a pointer to experimental unzip library in README (Gilles Vollant)
+- initialize variable gcc in configure (Chris Herborth)
+
+Changes in 1.0.9 (17 Feb 1998)
+- added gzputs and gzgets functions
+- do not clear eof flag in gzseek (Mark Diekhans)
+- fix gzseek for files in transparent mode (Mark Diekhans)
+- do not assume that vsprintf returns the number of bytes written (Jens Krinke)
+- replace EXPORT with ZEXPORT to avoid conflict with other programs
+- added compress2 in zconf.h, zlib.def, zlib.dnt
+- new asm code from Gilles Vollant in contrib/asm386
+- simplify the inflate code (Mark):
+ . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new()
+ . ZALLOC the length list in inflate_trees_fixed() instead of using stack
+ . ZALLOC the value area for huft_build() instead of using stack
+ . Simplify Z_FINISH check in inflate()
+
+- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8
+- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi)
+- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with
+  the declaration of FAR (Gilles VOllant)
+- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann)
+- read_buf buf parameter of type Bytef* instead of charf*
+- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout)
+- do not redeclare unlink in minigzip.c for WIN32 (John Bowler)
+- fix check for presence of directories in "make install" (Ian Willis)
+
+Changes in 1.0.8 (27 Jan 1998)
+- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
+- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
+- added compress2() to allow setting the compression level
+- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
+- use constant arrays for the static trees in trees.c instead of computing
+  them at run time (thanks to Ken Raeburn for this suggestion). To create
+  trees.h, compile with GEN_TREES_H and run "make test".
+- check return code of example in "make test" and display result
+- pass minigzip command line options to file_compress
+- simplifying code of inflateSync to avoid gcc 2.8 bug
+
+- support CC="gcc -Wall" in configure -s (QingLong)
+- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
+- fix test for shared library support to avoid compiler warnings
+- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant)
+- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit)
+- do not use fdopen for Metrowerks on Mac (Brad Pettit))
+- add checks for gzputc and gzputc in example.c
+- avoid warnings in gzio.c and deflate.c (Andreas Kleinert)
+- use const for the CRC table (Ken Raeburn)
+- fixed "make uninstall" for shared libraries
+- use Tracev instead of Trace in infblock.c
+- in example.c use correct compressed length for test_sync
+- suppress +vnocompatwarnings in configure for HPUX (not always supported)
+
+Changes in 1.0.7 (20 Jan 1998)
+- fix gzseek which was broken in write mode
+- return error for gzseek to negative absolute position
+- fix configure for Linux (Chun-Chung Chen)
+- increase stack space for MSC (Tim Wegner)
+- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant)
+- define EXPORTVA for gzprintf (Gilles Vollant)
+- added man page zlib.3 (Rick Rodgers)
+- for contrib/untgz, fix makedir() and improve Makefile
+
+- check gzseek in write mode in example.c
+- allocate extra buffer for seeks only if gzseek is actually called
+- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant)
+- add inflateSyncPoint in zconf.h
+- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def
+
+Changes in 1.0.6 (19 Jan 1998)
+- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
+  gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
+- Fix a deflate bug occuring only with compression level 0 (thanks to
+  Andy Buckler for finding this one).
+- In minigzip, pass transparently also the first byte for .Z files.
+- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
+- check Z_FINISH in inflate (thanks to Marc Schluper)
+- Implement deflateCopy (thanks to Adam Costello)
+- make static libraries by default in configure, add --shared option.
+- move MSDOS or Windows specific files to directory msdos
+- suppress the notion of partial flush to simplify the interface
+  (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
+- suppress history buffer provided by application to simplify the interface
+  (this feature was not implemented anyway in 1.0.4)
+- next_in and avail_in must be initialized before calling inflateInit or
+  inflateInit2
+- add EXPORT in all exported functions (for Windows DLL)
+- added Makefile.nt (thanks to Stephen Williams)
+- added the unsupported "contrib" directory:
+   contrib/asm386/ by Gilles Vollant <info@winimage.com>
+	386 asm code replacing longest_match().
+   contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
+        A C++ I/O streams interface to the zlib gz* functions
+   contrib/iostream2/  by Tyge Løvset <Tyge.Lovset@cmr.no>
+	Another C++ I/O streams interface
+   contrib/untgz/  by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+	A very simple tar.gz file extractor using zlib
+   contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+        How to use compress(), uncompress() and the gz* functions from VB.
+- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
+  level) in minigzip (thanks to Tom Lane)
+
+- use const for rommable constants in deflate
+- added test for gzseek and gztell in example.c
+- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
+- add undocumented function zError to convert error code to string
+  (for Tim Smithers)
+- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code.
+- Use default memcpy for Symantec MSDOS compiler.
+- Add EXPORT keyword for check_func (needed for Windows DLL)
+- add current directory to LD_LIBRARY_PATH for "make test"
+- create also a link for libz.so.1
+- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura)
+- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX)
+- added -soname for Linux in configure (Chun-Chung Chen,
+- assign numbers to the exported functions in zlib.def (for Windows DLL)
+- add advice in zlib.h for best usage of deflateSetDictionary
+- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn)
+- allow compilation with ANSI keywords only enabled for TurboC in large model
+- avoid "versionString"[0] (Borland bug)
+- add NEED_DUMMY_RETURN for Borland
+- use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
+- allow compilation with CC
+- defined STDC for OS/2 (David Charlap)	
+- limit external names to 8 chars for MVS (Thomas Lund)
+- in minigzip.c, use static buffers only for 16-bit systems
+- fix suffix check for "minigzip -d foo.gz"
+- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee)
+- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
+- added makelcc.bat for lcc-win32 (Tom St Denis)
+- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
+- Avoid expanded $Id: ChangeLog,v 1.1.1.3 2004/03/14 08:29:15 eich Exp $. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
+- check for unistd.h in configure (for off_t)
+- remove useless check parameter in inflate_blocks_free
+- avoid useless assignment of s->check to itself in inflate_blocks_new
+- do not flush twice in gzclose (thanks to Ken Raeburn)
+- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h
+- use NO_ERRNO_H instead of enumeration of operating systems with errno.h
+- work around buggy fclose on pipes for HP/UX
+- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson)
+- fix configure if CC is already equal to gcc
+
+Changes in 1.0.5 (3 Jan 98)
+- Fix inflate to terminate gracefully when fed corrupted or invalid data
+- Use const for rommable constants in inflate
+- Eliminate memory leaks on error conditions in inflate
+- Removed some vestigial code in inflate
+- Update web address in README
+  
+Changes in 1.0.4 (24 Jul 96)
+- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
+  bit, so the decompressor could decompress all the correct data but went
+  on to attempt decompressing extra garbage data. This affected minigzip too.
+- zlibVersion and gzerror return const char* (needed for DLL)
+- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
+- use z_error only for DEBUG (avoid problem with DLLs)
+
+Changes in 1.0.3 (2 Jul 96)
+- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS
+  small and medium models; this makes the library incompatible with previous
+  versions for these models. (No effect in large model or on other systems.)
+- return OK instead of BUF_ERROR if previous deflate call returned with
+  avail_out as zero but there is nothing to do
+- added memcmp for non STDC compilers
+- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly)
+- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO)
+- better check for 16-bit mode MSC (avoids problem with Symantec)
+
+Changes in 1.0.2 (23 May 96)
+- added Windows DLL support
+- added a function zlibVersion (for the DLL support)
+- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model)
+- Bytef is define's instead of typedef'd only for Borland C
+- avoid reading uninitialized memory in example.c
+- mention in README that the zlib format is now RFC1950
+- updated Makefile.dj2
+- added algorithm.doc
+
+Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
+- fix array overlay in deflate.c which sometimes caused bad compressed data
+- fix inflate bug with empty stored block
+- fix MSDOS medium model which was broken in 0.99
+- fix deflateParams() which could generated bad compressed data.
+- Bytef is define'd instead of typedef'ed (work around Borland bug)
+- added an INDEX file
+- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
+  Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas)
+- speed up adler32 for modern machines without auto-increment
+- added -ansi for IRIX in configure
+- static_init_done in trees.c is an int
+- define unlink as delete for VMS
+- fix configure for QNX
+- add configure branch for SCO and HPUX
+- avoid many warnings (unused variables, dead assignments, etc...)
+- no fdopen for BeOS
+- fix the Watcom fix for 32 bit mode (define FAR as empty)
+- removed redefinition of Byte for MKWERKS
+- work around an MWKERKS bug (incorrect merge of all .h files)
+
+Changes in 0.99 (27 Jan 96)
+- allow preset dictionary shared between compressor and decompressor
+- allow compression level 0 (no compression)
+- add deflateParams in zlib.h: allow dynamic change of compression level
+  and compression strategy.
+- test large buffers and deflateParams in example.c
+- add optional "configure" to build zlib as a shared library
+- suppress Makefile.qnx, use configure instead
+- fixed deflate for 64-bit systems (detected on Cray)
+- fixed inflate_blocks for 64-bit systems (detected on Alpha)
+- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
+- always return Z_BUF_ERROR when deflate() has nothing to do
+- deflateInit and inflateInit are now macros to allow version checking
+- prefix all global functions and types with z_ with -DZ_PREFIX
+- make falloc completely reentrant (inftrees.c)
+- fixed very unlikely race condition in ct_static_init
+- free in reverse order of allocation to help memory manager
+- use zlib-1.0/* instead of zlib/* inside the tar.gz
+- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith
+  -Wconversion -Wstrict-prototypes -Wmissing-prototypes"
+- allow gzread on concatenated .gz files
+- deflateEnd now returns Z_DATA_ERROR if it was premature
+- deflate is finally (?) fully deterministic (no matches beyond end of input)
+- Document Z_SYNC_FLUSH
+- add uninstall in Makefile
+- Check for __cpluplus in zlib.h
+- Better test in ct_align for partial flush
+- avoid harmless warnings for Borland C++
+- initialize hash_head in deflate.c
+- avoid warning on fdopen (gzio.c) for HP cc -Aa
+- include stdlib.h for STDC compilers
+- include errno.h for Cray
+- ignore error if ranlib doesn't exist
+- call ranlib twice for NeXTSTEP
+- use exec_prefix instead of prefix for libz.a
+- renamed ct_* as _tr_* to avoid conflict with applications
+- clear z->msg in inflateInit2 before any error return
+- initialize opaque in example.c, gzio.c, deflate.c and inflate.c
+- fixed typo in zconf.h (_GNUC__ => __GNUC__)
+- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode)
+- fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
+- in fcalloc, normalize pointer if size > 65520 bytes
+- don't use special fcalloc for 32 bit Borland C++
+- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
+- use Z_BINARY instead of BINARY
+- document that gzclose after gzdopen will close the file
+- allow "a" as mode in gzopen.
+- fix error checking in gzread
+- allow skipping .gz extra-field on pipes
+- added reference to Perl interface in README
+- put the crc table in FAR data (I dislike more and more the medium model :)
+- added get_crc_table
+- added a dimension to all arrays (Borland C can't count).
+- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast
+- guard against multiple inclusion of *.h (for precompiled header on Mac)
+- Watcom C pretends to be Microsoft C small model even in 32 bit mode.
+- don't use unsized arrays to avoid silly warnings by Visual C++:
+     warning C4746: 'inflate_mask' : unsized array treated as  '__far'
+     (what's wrong with far data in far model?).
+- define enum out of inflate_blocks_state to allow compilation with C++
+
+Changes in 0.95 (16 Aug 95)
+- fix MSDOS small and medium model (now easier to adapt to any compiler)
+- inlined send_bits
+- fix the final (:-) bug for deflate with flush (output was correct but
+  not completely flushed in rare occasions).
+- default window size is same for compression and decompression
+  (it's now sufficient to set MAX_WBITS in zconf.h).
+- voidp -> voidpf and voidnp -> voidp (for consistency with other
+  typedefs and because voidnp was not near in large model).
+
+Changes in 0.94 (13 Aug 95)
+- support MSDOS medium model
+- fix deflate with flush (could sometimes generate bad output)
+- fix deflateReset (zlib header was incorrectly suppressed)
+- added support for VMS
+- allow a compression level in gzopen()
+- gzflush now calls fflush
+- For deflate with flush, flush even if no more input is provided.
+- rename libgz.a as libz.a
+- avoid complex expression in infcodes.c triggering Turbo C bug
+- work around a problem with gcc on Alpha (in INSERT_STRING)
+- don't use inline functions (problem with some gcc versions)
+- allow renaming of Byte, uInt, etc... with #define.
+- avoid warning about (unused) pointer before start of array in deflate.c
+- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c
+- avoid reserved word 'new' in trees.c
+
+Changes in 0.93 (25 June 95)
+- temporarily disable inline functions
+- make deflate deterministic
+- give enough lookahead for PARTIAL_FLUSH
+- Set binary mode for stdin/stdout in minigzip.c for OS/2
+- don't even use signed char in inflate (not portable enough)
+- fix inflate memory leak for segmented architectures
+
+Changes in 0.92 (3 May 95)
+- don't assume that char is signed (problem on SGI)
+- Clear bit buffer when starting a stored block
+- no memcpy on Pyramid
+- suppressed inftest.c
+- optimized fill_window, put longest_match inline for gcc
+- optimized inflate on stored blocks.
+- untabify all sources to simplify patches
+
+Changes in 0.91 (2 May 95)
+- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h
+- Document the memory requirements in zconf.h
+- added "make install"
+- fix sync search logic in inflateSync
+- deflate(Z_FULL_FLUSH) now works even if output buffer too short
+- after inflateSync, don't scare people with just "lo world"
+- added support for DJGPP
+
+Changes in 0.9 (1 May 95)
+- don't assume that zalloc clears the allocated memory (the TurboC bug
+  was Mark's bug after all :)
+- let again gzread copy uncompressed data unchanged (was working in 0.71)
+- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented
+- added a test of inflateSync in example.c
+- moved MAX_WBITS to zconf.h because users might want to change that.
+- document explicitly that zalloc(64K) on MSDOS must return a normalized
+  pointer (zero offset)
+- added Makefiles for Microsoft C, Turbo C, Borland C++
+- faster crc32()
+
+Changes in 0.8 (29 April 95)
+- added fast inflate (inffast.c)
+- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
+  is incompatible with previous versions of zlib which returned Z_OK.
+- work around a TurboC compiler bug (bad code for b << 0, see infutil.h)
+  (actually that was not a compiler bug, see 0.81 above)
+- gzread no longer reads one extra byte in certain cases
+- In gzio destroy(), don't reference a freed structure
+- avoid many warnings for MSDOS
+- avoid the ERROR symbol which is used by MS Windows
+
+Changes in 0.71 (14 April 95)
+- Fixed more MSDOS compilation problems :( There is still a bug with
+  TurboC large model.
+
+Changes in 0.7 (14 April 95)
+- Added full inflate support.
+- Simplified the crc32() interface. The pre- and post-conditioning
+  (one's complement) is now done inside crc32(). WARNING: this is
+  incompatible with previous versions; see zlib.h for the new usage.
+
+Changes in 0.61 (12 April 95)
+- workaround for a bug in TurboC. example and minigzip now work on MSDOS.
+
+Changes in 0.6 (11 April 95)
+- added minigzip.c
+- added gzdopen to reopen a file descriptor as gzFile
+- added transparent reading of non-gziped files in gzread.
+- fixed bug in gzread (don't read crc as data)
+- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose).
+- don't allocate big arrays in the stack (for MSDOS)
+- fix some MSDOS compilation problems
+
+Changes in 0.5:
+- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but
+  not yet Z_FULL_FLUSH.
+- support decompression but only in a single step (forced Z_FINISH)
+- added opaque object for zalloc and zfree.
+- added deflateReset and inflateReset
+- added a variable zlib_version for consistency checking.
+- renamed the 'filter' parameter of deflateInit2 as 'strategy'.
+  Added Z_FILTERED and Z_HUFFMAN_ONLY constants.
+
+Changes in 0.4:
+- avoid "zip" everywhere, use zlib instead of ziplib.
+- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush
+  if compression method == 8.
+- added adler32 and crc32
+- renamed deflateOptions as deflateInit2, call one or the other but not both
+- added the method parameter for deflateInit2.
+- added inflateInit2
+- simplied considerably deflateInit and inflateInit by not supporting
+  user-provided history buffer. This is supported only in deflateInit2
+  and inflateInit2.
+
+Changes in 0.3:
+- prefix all macro names with Z_
+- use Z_FINISH instead of deflateEnd to finish compression.
+- added Z_HUFFMAN_ONLY
+- added gzerror()
diff --git a/nx-X11/extras/zlib/FAQ b/nx-X11/extras/zlib/FAQ
new file mode 100644
index 000000000..47a7d60c6
--- /dev/null
+++ b/nx-X11/extras/zlib/FAQ
@@ -0,0 +1,100 @@
+
+		Frequently Asked Questions about zlib
+
+
+If your question is not there, please check the zlib home page 
+http://www.zlib.org which may have more recent information.
+The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
+
+
+ 1. Is zlib Y2K-compliant?
+
+    Yes. zlib doesn't handle dates.
+
+ 2. Where can I get a Windows DLL version?
+
+    The zlib sources can be compiled without change to produce a DLL. If you
+    want a precompiled DLL, see http://www.winimage.com/zLibDll/ . Questions
+    about the zlib DLL should be sent to Gilles Vollant (info@winimage.com).
+
+ 3. Where can I get a Visual Basic interface to zlib?
+
+    See
+        * http://www.winimage.com/zLibDll/cmp-z-it.zip
+        * http://www.dogma.net/markn/articles/zlibtool/zlibtool.htm
+        * contrib/visual-basic.txt in the zlib distribution
+
+ 4. compress() returns Z_BUF_ERROR
+
+    Make sure that before the call of compress, the length of the compressed
+    buffer is equal to the total size of the compressed buffer and not
+    zero. For Visual Basic, check that this parameter is passed by reference
+    ("as any"), not by value ("as long").
+
+ 5. deflate() or inflate() returns Z_BUF_ERROR
+
+    Before making the call, make sure that avail_in and avail_out are not
+    zero. When setting the parameter flush equal to Z_FINISH, also make sure
+    that avail_out is big enough to allow processing all pending input.
+
+ 6. Where's the zlib documentation (man pages, etc.)?
+
+    It's in zlib.h for the moment, and Francis S. Lin has converted it to a
+    web page zlib.html. Volunteers to transform this to Unix-style man pages,
+    please contact Jean-loup Gailly (jloup@gzip.org). Examples of zlib usage
+    are in the files example.c and minigzip.c.
+
+ 7. Why don't you use GNU autoconf or libtool or ...?
+
+    Because we would like to keep zlib as a very small and simple
+    package. zlib is rather portable and doesn't need much configuration.
+
+ 8. I found a bug in zlib.
+
+    Most of the time, such problems are due to an incorrect usage of
+    zlib. Please try to reproduce the problem with a small program and send
+    the corresponding source to us at zlib@gzip.org . Do not send
+    multi-megabyte data files without prior agreement.
+
+ 9. Why do I get "undefined reference to gzputc"?
+
+    If "make test" produces something like
+
+       example.o(.text+0x154): undefined reference to `gzputc'
+      
+    check that you don't have old files libz.* in /usr/lib, /usr/local/lib or
+    /usr/X11R6/lib. Remove any old versions, then do "make install".
+
+10. I need a Delphi interface to zlib.
+
+    See the directories contrib/delphi and contrib/delphi2 in the zlib
+    distribution.
+
+11. Can zlib handle .zip archives?
+
+    See the directory contrib/minizip in the zlib distribution.
+
+12. Can zlib handle .Z files?
+
+    No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt
+    the code of uncompress on your own.
+
+13. How can I make a Unix shared library?
+
+    make clean
+    ./configure -s
+    make
+
+14. Why does "make test" fail on Mac OS X?
+
+    Mac OS X already includes zlib as a shared library, and so -lz links the
+    shared library instead of the one that the "make" compiled. For zlib
+    1.1.3, the two are incompatible due to different compile-time
+    options. Simply change the -lz in the Makefile to libz.a, and it will use
+    the compiled library instead of the shared one and the "make test" will
+    succeed.
+
+15. I have a question about OttoPDF
+
+    We are not the authors of OttoPDF. The real author is on the OttoPDF web
+    site Joel Hainley jhainley@myndkryme.com.
diff --git a/nx-X11/extras/zlib/INDEX b/nx-X11/extras/zlib/INDEX
new file mode 100644
index 000000000..8a2457664
--- /dev/null
+++ b/nx-X11/extras/zlib/INDEX
@@ -0,0 +1,86 @@
+ChangeLog		history of changes
+INDEX			this file
+FAQ			Frequently Asked Questions about zlib
+Make_vms.com		script for Vax/VMS
+Makefile		makefile for Unix (generated by configure)
+Makefile.in		makefile for Unix (template for configure)
+Makefile.riscos 	makefile for RISCOS
+README			guess what
+algorithm.txt		description of the (de)compression algorithm
+configure		configure script for Unix
+descrip.mms		makefile for Vax/VMS
+zlib.3			mini man page for zlib (volunteers to write full
+			man pages from zlib.h welcome. write to jloup@gzip.org)
+
+amiga/Makefile.sas	makefile for Amiga SAS/C
+amiga/Makefile.pup      makefile for Amiga powerUP SAS/C PPC
+
+msdos/Makefile.w32      makefile for Microsoft Visual C++ 32-bit
+msdos/Makefile.b32	makefile for Borland C++   32-bit
+msdos/Makefile.bor	makefile for Borland C/C++ 16-bit
+msdos/Makefile.dj2	makefile for DJGPP 2.x
+msdos/Makefile.emx	makefile for EMX 0.9c (32-bit DOS/OS2)
+msdos/Makefile.msc	makefile for Microsoft C 16-bit
+msdos/Makefile.tc	makefile for Turbo C
+msdos/Makefile.wat	makefile for Watcom C
+msdos/zlib.def        	definition file for Windows DLL
+msdos/zlib.rc         	definition file for Windows DLL
+
+nt/Makefile.nt		makefile for Windows NT
+nt/zlib.dnt		definition file for Windows NT DLL
+nt/Makefile.emx		makefile for EMX 0.9c/RSXNT 1.41 (Win32 Intel)
+nt/Makefile.gcc		makefile for Windows NT using GCC (mingw32)
+
+
+		zlib public header files (must be kept):
+zconf.h
+zlib.h
+
+		private source files used to build the zlib library:
+adler32.c
+compress.c
+crc32.c
+deflate.c
+deflate.h
+gzio.c
+infblock.c
+infblock.h
+infcodes.c
+infcodes.h
+inffast.c
+inffast.h
+inflate.c
+inftrees.c
+inftrees.h
+infutil.c
+infutil.h
+maketree.c
+trees.c
+uncompr.c
+zutil.c
+zutil.h
+
+		source files for sample programs:
+example.c
+minigzip.c
+
+		unsupported contribution by third parties
+
+contrib/asm386/ by Gilles Vollant <info@winimage.com>
+	386 asm code replacing longest_match().
+
+contrib/minizip/ by Gilles Vollant <info@winimage.com>
+	Mini zip and unzip based on zlib
+        See http://www.winimage.com/zLibDll/unzip.html
+
+contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
+        A C++ I/O streams interface to the zlib gz* functions
+
+contrib/iostream2/  by Tyge Løvset <Tyge.Lovset@cmr.no>
+	Another C++ I/O streams interface
+
+contrib/untgz/  by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+	A very simple tar.gz extractor using zlib
+
+contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+        How to use compress(), uncompress() and the gz* functions from VB.
diff --git a/nx-X11/extras/zlib/Make_vms.com b/nx-X11/extras/zlib/Make_vms.com
new file mode 100644
index 000000000..1c57e8f0e
--- /dev/null
+++ b/nx-X11/extras/zlib/Make_vms.com
@@ -0,0 +1,115 @@
+$! make libz under VMS
+$! written by Martin P.J. Zinser <m.zinser@gsi.de>
+$!
+$! Look for the compiler used
+$!
+$ ccopt = ""
+$ if f$getsyi("HW_MODEL").ge.1024
+$ then
+$  ccopt = "/prefix=all"+ccopt
+$  comp  = "__decc__=1"
+$  if f$trnlnm("SYS").eqs."" then define sys sys$library:
+$ else
+$  if f$search("SYS$SYSTEM:DECC$COMPILER.EXE").eqs.""
+$   then
+$    comp  = "__vaxc__=1"
+$    if f$trnlnm("SYS").eqs."" then define sys sys$library:
+$   else
+$    if f$trnlnm("SYS").eqs."" then define sys decc$library_include:
+$    ccopt = "/decc/prefix=all"+ccopt
+$    comp  = "__decc__=1"
+$  endif
+$ endif
+$!
+$! Build the thing plain or with mms
+$!
+$ write sys$output "Compiling Zlib sources ..."
+$ if f$search("SYS$SYSTEM:MMS.EXE").eqs.""
+$  then
+$   dele example.obj;*,minigzip.obj;*
+$   CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
+                adler32.c zlib.h zconf.h
+$   CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
+                compress.c zlib.h zconf.h
+$   CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
+                crc32.c zlib.h zconf.h
+$   CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
+                deflate.c deflate.h zutil.h zlib.h zconf.h
+$   CALL MAKE gzio.OBJ "CC ''CCOPT' gzio" -
+                gzio.c zutil.h zlib.h zconf.h
+$   CALL MAKE infblock.OBJ "CC ''CCOPT' infblock" -
+                infblock.c zutil.h zlib.h zconf.h infblock.h
+$   CALL MAKE infcodes.OBJ "CC ''CCOPT' infcodes" -
+                infcodes.c zutil.h zlib.h zconf.h inftrees.h
+$   CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
+                inffast.c zutil.h zlib.h zconf.h inffast.h
+$   CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" -
+                inflate.c zutil.h zlib.h zconf.h infblock.h
+$   CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" -
+                inftrees.c zutil.h zlib.h zconf.h inftrees.h
+$   CALL MAKE infutil.OBJ "CC ''CCOPT' infutil" -
+                infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+$   CALL MAKE trees.OBJ "CC ''CCOPT' trees" -
+                trees.c deflate.h zutil.h zlib.h zconf.h
+$   CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" -
+                uncompr.c zlib.h zconf.h
+$   CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
+                zutil.c zutil.h zlib.h zconf.h
+$   write sys$output "Building Zlib ..."
+$   CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
+$   write sys$output "Building example..."
+$   CALL MAKE example.OBJ "CC ''CCOPT' example" -
+                example.c zlib.h zconf.h
+$   call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
+$   write sys$output "Building minigzip..."
+$   CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" -
+                minigzip.c zlib.h zconf.h
+$   call make minigzip.exe - 
+                "LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" - 
+                minigzip.obj libz.olb
+$  else
+$   mms/macro=('comp')
+$  endif
+$ write sys$output "Zlib build completed"
+$ exit
+$!
+$!
+$MAKE: SUBROUTINE   !SUBROUTINE TO CHECK DEPENDENCIES
+$ V = 'F$Verify(0)
+$! P1 = What we are trying to make
+$! P2 = Command to make it
+$! P3 - P8  What it depends on
+$
+$ If F$Search(P1) .Eqs. "" Then Goto Makeit
+$ Time = F$CvTime(F$File(P1,"RDT"))
+$arg=3
+$Loop:
+$       Argument = P'arg
+$       If Argument .Eqs. "" Then Goto Exit
+$       El=0
+$Loop2:
+$       File = F$Element(El," ",Argument)
+$       If File .Eqs. " " Then Goto Endl
+$       AFile = ""
+$Loop3:
+$       OFile = AFile
+$       AFile = F$Search(File)
+$       If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl
+$       If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit
+$       Goto Loop3
+$NextEL:
+$       El = El + 1
+$       Goto Loop2
+$EndL:
+$ arg=arg+1
+$ If arg .Le. 8 Then Goto Loop
+$ Goto Exit
+$
+$Makeit:
+$ VV=F$VERIFY(0)
+$ write sys$output P2
+$ 'P2
+$ VV='F$Verify(VV)
+$Exit:
+$ If V Then Set Verify
+$ENDSUBROUTINE
diff --git a/nx-X11/extras/zlib/Makefile b/nx-X11/extras/zlib/Makefile
new file mode 100644
index 000000000..531562b2e
--- /dev/null
+++ b/nx-X11/extras/zlib/Makefile
@@ -0,0 +1,175 @@
+# Makefile for zlib
+# Copyright (C) 1995-2002 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile and test, type:
+#   ./configure; make test
+# The call of configure is optional if you don't have special requirements
+# If you wish to build zlib as a shared library, use: ./configure -s
+
+# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
+#    make install
+# To install in $HOME instead of /usr/local, use:
+#    make install prefix=$HOME
+
+CC=cc
+
+CFLAGS=-O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-g -DDEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+#           -Wstrict-prototypes -Wmissing-prototypes
+
+LDFLAGS=-L. -lz
+LDSHARED=$(CC)
+CPP=$(CC) -E
+
+VER=1.1.4
+LIBS=libz.a
+SHAREDLIB=libz.so
+
+AR=ar rc
+RANLIB=ranlib
+TAR=tar
+SHELL=/bin/sh
+
+prefix = /usr/local
+exec_prefix = ${prefix}
+libdir = ${exec_prefix}/lib
+includedir = ${prefix}/include
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+OBJA =
+# to use the asm code: make OBJA=match.o
+
+TEST_OBJS = example.o minigzip.o
+
+DISTFILES = README FAQ INDEX ChangeLog configure Make*[a-z0-9] *.[ch] *.mms \
+  algorithm.txt zlib.3 zlib.html \
+  msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
+  nt/Make*[a-z0-9] nt/zlib.dnt amiga/Make*.??? os2/M*.os2 os2/zlib.def \
+  contrib/RE*.contrib contrib/*.txt contrib/asm386/*.asm contrib/asm386/*.c \
+  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/asm[56]86/*.?86 \
+  contrib/asm[56]86/*.S contrib/iostream/*.cpp \
+  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
+  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32 \
+  contrib/minizip/[CM]*[pe] contrib/minizip/*.[ch] contrib/minizip/*.[td]?? \
+  contrib/delphi*/*.???
+
+all: example minigzip
+
+test: all
+	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+	echo hello world | ./minigzip | ./minigzip -d || \
+	  echo '		*** minigzip test FAILED ***' ; \
+	if ./example; then \
+	  echo '		*** zlib test OK ***'; \
+	else \
+	  echo '		*** zlib test FAILED ***'; \
+	fi
+
+libz.a: $(OBJS) $(OBJA)
+	$(AR) $@ $(OBJS) $(OBJA)
+	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
+
+match.o: match.S
+	$(CPP) match.S > _match.s
+	$(CC) -c _match.s
+	mv _match.o match.o
+	rm -f _match.s
+
+$(SHAREDLIB).$(VER): $(OBJS)
+	$(LDSHARED) -o $@ $(OBJS)
+	rm -f $(SHAREDLIB) $(SHAREDLIB).1
+	ln -s $@ $(SHAREDLIB)
+	ln -s $@ $(SHAREDLIB).1
+
+example: example.o $(LIBS)
+	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+
+minigzip: minigzip.o $(LIBS)
+	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+
+install: $(LIBS)
+	-@if [ ! -d $(includedir)  ]; then mkdir $(includedir); fi
+	-@if [ ! -d $(libdir) ]; then mkdir $(libdir); fi
+	cp zlib.h zconf.h $(includedir)
+	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
+	cp $(LIBS) $(libdir)
+	cd $(libdir); chmod 755 $(LIBS)
+	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+	cd $(libdir); if test -f $(SHAREDLIB).$(VER); then \
+	  rm -f $(SHAREDLIB) $(SHAREDLIB).1; \
+	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB); \
+	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB).1; \
+	  (ldconfig || true)  >/dev/null 2>&1; \
+	fi
+# The ranlib in install is needed on NeXTSTEP which checks file times
+# ldconfig is for Linux
+
+uninstall:
+	cd $(includedir); \
+	v=$(VER); \
+	if test -f zlib.h; then \
+	  v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
+          rm -f zlib.h zconf.h; \
+	fi; \
+	cd $(libdir); rm -f libz.a; \
+	if test -f $(SHAREDLIB).$$v; then \
+	  rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
+	fi
+
+clean:
+	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz so_locations \
+	   _match.s maketree
+
+distclean:	clean
+
+zip:
+	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c contrib/minizip/test.zip
+	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+	zip -ul9 zlib$$v $(DISTFILES)
+	mv Makefile~ Makefile
+
+dist:
+	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c contrib/minizip/test.zip
+	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+	rm -f $$d.tar.gz; \
+	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
+	files=""; \
+	for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
+	cd ..; \
+	GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
+	if test ! -d $$d; then rm -f $$d; fi
+	mv Makefile~ Makefile
+
+tags:	
+	etags *.[ch]
+
+depend:
+	makedepend -- $(CFLAGS) -- *.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
+infcodes.o: zutil.h zlib.h zconf.h
+infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h
+inffast.o: infblock.h infcodes.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+minigzip.o:  zlib.h zconf.h 
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h  
diff --git a/nx-X11/extras/zlib/Makefile.in b/nx-X11/extras/zlib/Makefile.in
new file mode 100644
index 000000000..531562b2e
--- /dev/null
+++ b/nx-X11/extras/zlib/Makefile.in
@@ -0,0 +1,175 @@
+# Makefile for zlib
+# Copyright (C) 1995-2002 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile and test, type:
+#   ./configure; make test
+# The call of configure is optional if you don't have special requirements
+# If you wish to build zlib as a shared library, use: ./configure -s
+
+# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
+#    make install
+# To install in $HOME instead of /usr/local, use:
+#    make install prefix=$HOME
+
+CC=cc
+
+CFLAGS=-O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-g -DDEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+#           -Wstrict-prototypes -Wmissing-prototypes
+
+LDFLAGS=-L. -lz
+LDSHARED=$(CC)
+CPP=$(CC) -E
+
+VER=1.1.4
+LIBS=libz.a
+SHAREDLIB=libz.so
+
+AR=ar rc
+RANLIB=ranlib
+TAR=tar
+SHELL=/bin/sh
+
+prefix = /usr/local
+exec_prefix = ${prefix}
+libdir = ${exec_prefix}/lib
+includedir = ${prefix}/include
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+OBJA =
+# to use the asm code: make OBJA=match.o
+
+TEST_OBJS = example.o minigzip.o
+
+DISTFILES = README FAQ INDEX ChangeLog configure Make*[a-z0-9] *.[ch] *.mms \
+  algorithm.txt zlib.3 zlib.html \
+  msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
+  nt/Make*[a-z0-9] nt/zlib.dnt amiga/Make*.??? os2/M*.os2 os2/zlib.def \
+  contrib/RE*.contrib contrib/*.txt contrib/asm386/*.asm contrib/asm386/*.c \
+  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/asm[56]86/*.?86 \
+  contrib/asm[56]86/*.S contrib/iostream/*.cpp \
+  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
+  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32 \
+  contrib/minizip/[CM]*[pe] contrib/minizip/*.[ch] contrib/minizip/*.[td]?? \
+  contrib/delphi*/*.???
+
+all: example minigzip
+
+test: all
+	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+	echo hello world | ./minigzip | ./minigzip -d || \
+	  echo '		*** minigzip test FAILED ***' ; \
+	if ./example; then \
+	  echo '		*** zlib test OK ***'; \
+	else \
+	  echo '		*** zlib test FAILED ***'; \
+	fi
+
+libz.a: $(OBJS) $(OBJA)
+	$(AR) $@ $(OBJS) $(OBJA)
+	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
+
+match.o: match.S
+	$(CPP) match.S > _match.s
+	$(CC) -c _match.s
+	mv _match.o match.o
+	rm -f _match.s
+
+$(SHAREDLIB).$(VER): $(OBJS)
+	$(LDSHARED) -o $@ $(OBJS)
+	rm -f $(SHAREDLIB) $(SHAREDLIB).1
+	ln -s $@ $(SHAREDLIB)
+	ln -s $@ $(SHAREDLIB).1
+
+example: example.o $(LIBS)
+	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+
+minigzip: minigzip.o $(LIBS)
+	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+
+install: $(LIBS)
+	-@if [ ! -d $(includedir)  ]; then mkdir $(includedir); fi
+	-@if [ ! -d $(libdir) ]; then mkdir $(libdir); fi
+	cp zlib.h zconf.h $(includedir)
+	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
+	cp $(LIBS) $(libdir)
+	cd $(libdir); chmod 755 $(LIBS)
+	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+	cd $(libdir); if test -f $(SHAREDLIB).$(VER); then \
+	  rm -f $(SHAREDLIB) $(SHAREDLIB).1; \
+	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB); \
+	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB).1; \
+	  (ldconfig || true)  >/dev/null 2>&1; \
+	fi
+# The ranlib in install is needed on NeXTSTEP which checks file times
+# ldconfig is for Linux
+
+uninstall:
+	cd $(includedir); \
+	v=$(VER); \
+	if test -f zlib.h; then \
+	  v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
+          rm -f zlib.h zconf.h; \
+	fi; \
+	cd $(libdir); rm -f libz.a; \
+	if test -f $(SHAREDLIB).$$v; then \
+	  rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
+	fi
+
+clean:
+	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz so_locations \
+	   _match.s maketree
+
+distclean:	clean
+
+zip:
+	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c contrib/minizip/test.zip
+	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+	zip -ul9 zlib$$v $(DISTFILES)
+	mv Makefile~ Makefile
+
+dist:
+	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c contrib/minizip/test.zip
+	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+	rm -f $$d.tar.gz; \
+	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
+	files=""; \
+	for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
+	cd ..; \
+	GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
+	if test ! -d $$d; then rm -f $$d; fi
+	mv Makefile~ Makefile
+
+tags:	
+	etags *.[ch]
+
+depend:
+	makedepend -- $(CFLAGS) -- *.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
+infcodes.o: zutil.h zlib.h zconf.h
+infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h
+inffast.o: infblock.h infcodes.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+minigzip.o:  zlib.h zconf.h 
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h  
diff --git a/nx-X11/extras/zlib/Makefile.riscos b/nx-X11/extras/zlib/Makefile.riscos
new file mode 100644
index 000000000..d97f44923
--- /dev/null
+++ b/nx-X11/extras/zlib/Makefile.riscos
@@ -0,0 +1,151 @@
+# Project:   zlib_1_03
+# Patched for zlib 1.1.2 rw@shadow.org.uk 19980430
+# test works out-of-the-box, installs `somewhere' on demand
+
+# Toolflags:
+CCflags = -c -depend !Depend -IC: -g -throwback  -DRISCOS  -fah 
+C++flags = -c -depend !Depend -IC: -throwback
+Linkflags = -aif -c++ -o $@ 
+ObjAsmflags = -throwback -NoCache -depend !Depend
+CMHGflags = 
+LibFileflags = -c -l -o $@ 
+Squeezeflags = -o $@
+
+# change the line below to where _you_ want the library installed.
+libdest = lib:zlib
+
+# Final targets:
+@.lib:   @.o.adler32 @.o.compress @.o.crc32 @.o.deflate @.o.gzio \
+        @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil @.o.trees \
+        @.o.uncompr @.o.zutil 
+        LibFile $(LibFileflags) @.o.adler32 @.o.compress @.o.crc32 @.o.deflate \
+        @.o.gzio @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil \
+        @.o.trees @.o.uncompr @.o.zutil 
+test:   @.minigzip @.example @.lib
+	@copy @.lib @.libc  A~C~DF~L~N~P~Q~RS~TV
+	@echo running tests: hang on.
+	@/@.minigzip -f -9 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -f -1 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -h -9 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -h -1 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -9 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -1 libc
+	@/@.minigzip -d libc-gz
+	@diff @.lib @.libc
+	@echo that should have reported '@.lib and @.libc identical' if you have diff.
+	@/@.example @.fred @.fred
+	@echo that will have given lots of hello!'s.
+
+@.minigzip:   @.o.minigzip @.lib C:o.Stubs 
+        Link $(Linkflags) @.o.minigzip @.lib C:o.Stubs 
+@.example:   @.o.example @.lib C:o.Stubs 
+        Link $(Linkflags) @.o.example @.lib C:o.Stubs
+
+install: @.lib
+	cdir $(libdest)
+	cdir $(libdest).h
+	@copy @.h.zlib $(libdest).h.zlib A~C~DF~L~N~P~Q~RS~TV
+	@copy @.h.zconf $(libdest).h.zconf A~C~DF~L~N~P~Q~RS~TV
+	@copy @.lib $(libdest).lib  A~C~DF~L~N~P~Q~RS~TV
+	@echo okay, installed zlib in $(libdest)
+
+clean:; remove @.minigzip
+	remove @.example
+	remove @.libc
+	-wipe @.o.* F~r~cV
+	remove @.fred
+
+# User-editable dependencies:
+.c.o:
+        cc $(ccflags) -o $@ $<
+
+# Static dependencies:
+
+# Dynamic dependencies:
+o.example:	c.example
+o.example:	h.zlib
+o.example:	h.zconf
+o.minigzip:	c.minigzip
+o.minigzip:	h.zlib
+o.minigzip:	h.zconf
+o.adler32:	c.adler32
+o.adler32:	h.zlib
+o.adler32:	h.zconf
+o.compress:	c.compress
+o.compress:	h.zlib
+o.compress:	h.zconf
+o.crc32:	c.crc32
+o.crc32:	h.zlib
+o.crc32:	h.zconf
+o.deflate:	c.deflate
+o.deflate:	h.deflate
+o.deflate:	h.zutil
+o.deflate:	h.zlib
+o.deflate:	h.zconf
+o.gzio:	c.gzio
+o.gzio:	h.zutil
+o.gzio:	h.zlib
+o.gzio:	h.zconf
+o.infblock:	c.infblock
+o.infblock:	h.zutil
+o.infblock:	h.zlib
+o.infblock:	h.zconf
+o.infblock:	h.infblock
+o.infblock:	h.inftrees
+o.infblock:	h.infcodes
+o.infblock:	h.infutil
+o.infcodes:	c.infcodes
+o.infcodes:	h.zutil
+o.infcodes:	h.zlib
+o.infcodes:	h.zconf
+o.infcodes:	h.inftrees
+o.infcodes:	h.infblock
+o.infcodes:	h.infcodes
+o.infcodes:	h.infutil
+o.infcodes:	h.inffast
+o.inffast:	c.inffast
+o.inffast:	h.zutil
+o.inffast:	h.zlib
+o.inffast:	h.zconf
+o.inffast:	h.inftrees
+o.inffast:	h.infblock
+o.inffast:	h.infcodes
+o.inffast:	h.infutil
+o.inffast:	h.inffast
+o.inflate:	c.inflate
+o.inflate:	h.zutil
+o.inflate:	h.zlib
+o.inflate:	h.zconf
+o.inflate:	h.infblock
+o.inftrees:	c.inftrees
+o.inftrees:	h.zutil
+o.inftrees:	h.zlib
+o.inftrees:	h.zconf
+o.inftrees:	h.inftrees
+o.inftrees:	h.inffixed
+o.infutil:	c.infutil
+o.infutil:	h.zutil
+o.infutil:	h.zlib
+o.infutil:	h.zconf
+o.infutil:	h.infblock
+o.infutil:	h.inftrees
+o.infutil:	h.infcodes
+o.infutil:	h.infutil
+o.trees:	c.trees
+o.trees:	h.deflate
+o.trees:	h.zutil
+o.trees:	h.zlib
+o.trees:	h.zconf
+o.trees:	h.trees
+o.uncompr:	c.uncompr
+o.uncompr:	h.zlib
+o.uncompr:	h.zconf
+o.zutil:	c.zutil
+o.zutil:	h.zutil
+o.zutil:	h.zlib
+o.zutil:	h.zconf
diff --git a/nx-X11/extras/zlib/README b/nx-X11/extras/zlib/README
new file mode 100644
index 000000000..29d67146a
--- /dev/null
+++ b/nx-X11/extras/zlib/README
@@ -0,0 +1,147 @@
+zlib 1.1.4 is a general purpose data compression library.  All the code
+is thread safe.  The data format used by the zlib library
+is described by RFCs (Request for Comments) 1950 to 1952 in the files 
+http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate
+format) and rfc1952.txt (gzip format). These documents are also available in
+other formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
+
+All functions of the compression library are documented in the file zlib.h
+(volunteer to write man pages welcome, contact jloup@gzip.org). A usage
+example of the library is given in the file example.c which also tests that
+the library is working correctly. Another example is given in the file
+minigzip.c. The compression library itself is composed of all source files
+except example.c and minigzip.c.
+
+To compile all files and run the test program, follow the instructions
+given at the top of Makefile. In short "make test; make install"
+should work for most machines. For Unix: "./configure; make test; make install"
+For MSDOS, use one of the special makefiles such as Makefile.msc.
+For VMS, use Make_vms.com or descrip.mms.
+
+Questions about zlib should be sent to <zlib@gzip.org>, or to
+Gilles Vollant <info@winimage.com> for the Windows DLL version.
+The zlib home page is http://www.zlib.org or http://www.gzip.org/zlib/
+Before reporting a problem, please check this site to verify that
+you have the latest version of zlib; otherwise get the latest version and
+check whether the problem still exists or not.
+
+PLEASE read the zlib FAQ http://www.gzip.org/zlib/zlib_faq.html
+before asking for help.
+
+Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
+issue of  Dr. Dobb's Journal; a copy of the article is available in
+http://dogma.net/markn/articles/zlibtool/zlibtool.htm
+
+The changes made in version 1.1.4 are documented in the file ChangeLog.
+The only changes made since 1.1.3 are bug corrections:
+
+- ZFREE was repeated on same allocation on some error conditions.
+  This creates a security problem described in
+  http://www.zlib.org/advisory-2002-03-11.txt
+- Returned incorrect error (Z_MEM_ERROR) on some invalid data
+- Avoid accesses before window for invalid distances with inflate window
+  less than 32K.
+- force windowBits > 8 to avoid a bug in the encoder for a window size
+  of 256 bytes. (A complete fix will be available in 1.1.5).
+
+The beta version 1.1.5beta includes many more changes. A new official
+version 1.1.5 will be released as soon as extensive testing has been
+completed on it.
+
+
+Unsupported third party contributions are provided in directory "contrib".
+
+A Java implementation of zlib is available in the Java Development Kit
+http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
+See the zlib home page http://www.zlib.org for details.
+
+A Perl interface to zlib written by Paul Marquess <pmarquess@bfsec.bt.co.uk>
+is in the CPAN (Comprehensive Perl Archive Network) sites
+http://www.cpan.org/modules/by-module/Compress/
+
+A Python interface to zlib written by A.M. Kuchling <amk@magnet.com>
+is available in Python 1.5 and later versions, see
+http://www.python.org/doc/lib/module-zlib.html
+
+A zlib binding for TCL written by Andreas Kupries <a.kupries@westend.com>
+is availlable at http://www.westend.com/~kupries/doc/trf/man/man.html
+
+An experimental package to read and write files in .zip format,
+written on top of zlib by Gilles Vollant <info@winimage.com>, is
+available at http://www.winimage.com/zLibDll/unzip.html
+and also in the contrib/minizip directory of zlib.
+
+
+Notes for some targets:
+
+- To build a Windows DLL version, include in a DLL project zlib.def, zlib.rc
+  and all .c files except example.c and minigzip.c; compile with -DZLIB_DLL
+  The zlib DLL support was initially done by Alessandro Iacopetti and is
+  now maintained by Gilles Vollant <info@winimage.com>. Check the zlib DLL
+  home page at http://www.winimage.com/zLibDll
+
+  From Visual Basic, you can call the DLL functions which do not take
+  a structure as argument: compress, uncompress and all gz* functions.
+  See contrib/visual-basic.txt for more information, or get
+  http://www.tcfb.com/dowseware/cmp-z-it.zip
+
+- For 64-bit Irix, deflate.c must be compiled without any optimization.
+  With -O, one libpng test fails. The test works in 32 bit mode (with
+  the -n32 compiler flag). The compiler bug has been reported to SGI.
+
+- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1   
+  it works when compiled with cc.
+
+- on Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1
+  is necessary to get gzprintf working correctly. This is done by configure.
+
+- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works
+  with other compilers. Use "make test" to check your compiler.
+
+- gzdopen is not supported on RISCOS, BEOS and by some Mac compilers.
+
+- For Turbo C the small model is supported only with reduced performance to
+  avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
+
+- For PalmOs, see http://www.cs.uit.no/~perm/PASTA/pilot/software.html
+  Per Harald Myrvang <perm@stud.cs.uit.no>
+
+
+Acknowledgments:
+
+  The deflate format used by zlib was defined by Phil Katz. The deflate
+  and zlib specifications were written by L. Peter Deutsch. Thanks to all the
+  people who reported problems and suggested various improvements in zlib;
+  they are too numerous to cite here.
+
+Copyright notice:
+
+ (C) 1995-2002 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  jloup@gzip.org          madler@alumni.caltech.edu
+
+If you use the zlib library in a product, we would appreciate *not*
+receiving lengthy legal documents to sign. The sources are provided
+for free but without warranty of any kind.  The library has been
+entirely written by Jean-loup Gailly and Mark Adler; it does not
+include third-party code.
+
+If you redistribute modified sources, we would appreciate that you include
+in the file ChangeLog history information documenting your changes.
diff --git a/nx-X11/extras/zlib/adler32.c b/nx-X11/extras/zlib/adler32.c
new file mode 100644
index 000000000..7cf291700
--- /dev/null
+++ b/nx-X11/extras/zlib/adler32.c
@@ -0,0 +1,46 @@
+/* adler32.c -- compute the Adler-32 checksum of a data stream
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+#include "zlib.h"
+
+#define BASE 65521L /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
+#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
+#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
+#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
+#define DO16(buf)   DO8(buf,0); DO8(buf,8);
+
+/* ========================================================================= */
+uLong ZEXPORT adler32(adler, buf, len)
+    uLong adler;
+    const Bytef *buf;
+    uInt len;
+{
+    unsigned long s1 = adler & 0xffff;
+    unsigned long s2 = (adler >> 16) & 0xffff;
+    int k;
+
+    if (buf == Z_NULL) return 1L;
+
+    while (len > 0) {
+        k = len < NMAX ? len : NMAX;
+        len -= k;
+        while (k >= 16) {
+            DO16(buf);
+	    buf += 16;
+            k -= 16;
+        }
+        if (k != 0) do {
+            s1 += *buf++;
+	    s2 += s1;
+        } while (--k);
+        s1 %= BASE;
+        s2 %= BASE;
+    }
+    return (s2 << 16) | s1;
+}
diff --git a/nx-X11/extras/zlib/algorithm.txt b/nx-X11/extras/zlib/algorithm.txt
new file mode 100644
index 000000000..cdc830b5d
--- /dev/null
+++ b/nx-X11/extras/zlib/algorithm.txt
@@ -0,0 +1,213 @@
+1. Compression algorithm (deflate)
+
+The deflation algorithm used by gzip (also zip and zlib) is a variation of
+LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
+the input data.  The second occurrence of a string is replaced by a
+pointer to the previous string, in the form of a pair (distance,
+length).  Distances are limited to 32K bytes, and lengths are limited
+to 258 bytes. When a string does not occur anywhere in the previous
+32K bytes, it is emitted as a sequence of literal bytes.  (In this
+description, `string' must be taken as an arbitrary sequence of bytes,
+and is not restricted to printable characters.)
+
+Literals or match lengths are compressed with one Huffman tree, and
+match distances are compressed with another tree. The trees are stored
+in a compact form at the start of each block. The blocks can have any
+size (except that the compressed data for one block must fit in
+available memory). A block is terminated when deflate() determines that
+it would be useful to start another block with fresh trees. (This is
+somewhat similar to the behavior of LZW-based _compress_.)
+
+Duplicated strings are found using a hash table. All input strings of
+length 3 are inserted in the hash table. A hash index is computed for
+the next 3 bytes. If the hash chain for this index is not empty, all
+strings in the chain are compared with the current input string, and
+the longest match is selected.
+
+The hash chains are searched starting with the most recent strings, to
+favor small distances and thus take advantage of the Huffman encoding.
+The hash chains are singly linked. There are no deletions from the
+hash chains, the algorithm simply discards matches that are too old.
+
+To avoid a worst-case situation, very long hash chains are arbitrarily
+truncated at a certain length, determined by a runtime option (level
+parameter of deflateInit). So deflate() does not always find the longest
+possible match but generally finds a match which is long enough.
+
+deflate() also defers the selection of matches with a lazy evaluation
+mechanism. After a match of length N has been found, deflate() searches for
+a longer match at the next input byte. If a longer match is found, the
+previous match is truncated to a length of one (thus producing a single
+literal byte) and the process of lazy evaluation begins again. Otherwise,
+the original match is kept, and the next match search is attempted only N
+steps later.
+
+The lazy match evaluation is also subject to a runtime parameter. If
+the current match is long enough, deflate() reduces the search for a longer
+match, thus speeding up the whole process. If compression ratio is more
+important than speed, deflate() attempts a complete second search even if
+the first match is already long enough.
+
+The lazy match evaluation is not performed for the fastest compression
+modes (level parameter 1 to 3). For these fast modes, new strings
+are inserted in the hash table only when no match was found, or
+when the match is not too long. This degrades the compression ratio
+but saves time since there are both fewer insertions and fewer searches.
+
+
+2. Decompression algorithm (inflate)
+
+2.1 Introduction
+
+The real question is, given a Huffman tree, how to decode fast.  The most
+important realization is that shorter codes are much more common than
+longer codes, so pay attention to decoding the short codes fast, and let
+the long codes take longer to decode.
+
+inflate() sets up a first level table that covers some number of bits of
+input less than the length of longest code.  It gets that many bits from the
+stream, and looks it up in the table.  The table will tell if the next
+code is that many bits or less and how many, and if it is, it will tell
+the value, else it will point to the next level table for which inflate()
+grabs more bits and tries to decode a longer code.
+
+How many bits to make the first lookup is a tradeoff between the time it
+takes to decode and the time it takes to build the table.  If building the
+table took no time (and if you had infinite memory), then there would only
+be a first level table to cover all the way to the longest code.  However,
+building the table ends up taking a lot longer for more bits since short
+codes are replicated many times in such a table.  What inflate() does is
+simply to make the number of bits in the first table a variable, and set it
+for the maximum speed.
+
+inflate() sends new trees relatively often, so it is possibly set for a
+smaller first level table than an application that has only one tree for
+all the data.  For inflate, which has 286 possible codes for the
+literal/length tree, the size of the first table is nine bits.  Also the
+distance trees have 30 possible values, and the size of the first table is
+six bits.  Note that for each of those cases, the table ended up one bit
+longer than the ``average'' code length, i.e. the code length of an
+approximately flat code which would be a little more than eight bits for
+286 symbols and a little less than five bits for 30 symbols.  It would be
+interesting to see if optimizing the first level table for other
+applications gave values within a bit or two of the flat code size.
+
+
+2.2 More details on the inflate table lookup
+
+Ok, you want to know what this cleverly obfuscated inflate tree actually  
+looks like.  You are correct that it's not a Huffman tree.  It is simply a  
+lookup table for the first, let's say, nine bits of a Huffman symbol.  The  
+symbol could be as short as one bit or as long as 15 bits.  If a particular  
+symbol is shorter than nine bits, then that symbol's translation is duplicated
+in all those entries that start with that symbol's bits.  For example, if the  
+symbol is four bits, then it's duplicated 32 times in a nine-bit table.  If a  
+symbol is nine bits long, it appears in the table once.
+
+If the symbol is longer than nine bits, then that entry in the table points  
+to another similar table for the remaining bits.  Again, there are duplicated  
+entries as needed.  The idea is that most of the time the symbol will be short
+and there will only be one table look up.  (That's whole idea behind data  
+compression in the first place.)  For the less frequent long symbols, there  
+will be two lookups.  If you had a compression method with really long  
+symbols, you could have as many levels of lookups as is efficient.  For  
+inflate, two is enough.
+
+So a table entry either points to another table (in which case nine bits in  
+the above example are gobbled), or it contains the translation for the symbol  
+and the number of bits to gobble.  Then you start again with the next  
+ungobbled bit.
+
+You may wonder: why not just have one lookup table for how ever many bits the  
+longest symbol is?  The reason is that if you do that, you end up spending  
+more time filling in duplicate symbol entries than you do actually decoding.   
+At least for deflate's output that generates new trees every several 10's of  
+kbytes.  You can imagine that filling in a 2^15 entry table for a 15-bit code  
+would take too long if you're only decoding several thousand symbols.  At the  
+other extreme, you could make a new table for every bit in the code.  In fact,
+that's essentially a Huffman tree.  But then you spend two much time  
+traversing the tree while decoding, even for short symbols.
+
+So the number of bits for the first lookup table is a trade of the time to  
+fill out the table vs. the time spent looking at the second level and above of
+the table.
+
+Here is an example, scaled down:
+
+The code being decoded, with 10 symbols, from 1 to 6 bits long:
+
+A: 0
+B: 10
+C: 1100
+D: 11010
+E: 11011
+F: 11100
+G: 11101
+H: 11110
+I: 111110
+J: 111111
+
+Let's make the first table three bits long (eight entries):
+
+000: A,1
+001: A,1
+010: A,1
+011: A,1
+100: B,2
+101: B,2
+110: -> table X (gobble 3 bits)
+111: -> table Y (gobble 3 bits)
+
+Each entry is what the bits decode to and how many bits that is, i.e. how  
+many bits to gobble.  Or the entry points to another table, with the number of
+bits to gobble implicit in the size of the table.
+
+Table X is two bits long since the longest code starting with 110 is five bits
+long:
+
+00: C,1
+01: C,1
+10: D,2
+11: E,2
+
+Table Y is three bits long since the longest code starting with 111 is six  
+bits long:
+
+000: F,2
+001: F,2
+010: G,2
+011: G,2
+100: H,2
+101: H,2
+110: I,3
+111: J,3
+
+So what we have here are three tables with a total of 20 entries that had to  
+be constructed.  That's compared to 64 entries for a single table.  Or  
+compared to 16 entries for a Huffman tree (six two entry tables and one four  
+entry table).  Assuming that the code ideally represents the probability of  
+the symbols, it takes on the average 1.25 lookups per symbol.  That's compared
+to one lookup for the single table, or 1.66 lookups per symbol for the  
+Huffman tree.
+
+There, I think that gives you a picture of what's going on.  For inflate, the  
+meaning of a particular symbol is often more than just a letter.  It can be a  
+byte (a "literal"), or it can be either a length or a distance which  
+indicates a base value and a number of bits to fetch after the code that is  
+added to the base value.  Or it might be the special end-of-block code.  The  
+data structures created in inftrees.c try to encode all that information  
+compactly in the tables.
+
+
+Jean-loup Gailly        Mark Adler
+jloup@gzip.org          madler@alumni.caltech.edu
+
+
+References:
+
+[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
+Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
+pp. 337-343.
+
+``DEFLATE Compressed Data Format Specification'' available in
+ftp://ds.internic.net/rfc/rfc1951.txt
diff --git a/nx-X11/extras/zlib/compress.c b/nx-X11/extras/zlib/compress.c
new file mode 100644
index 000000000..d2047dfd7
--- /dev/null
+++ b/nx-X11/extras/zlib/compress.c
@@ -0,0 +1,66 @@
+/* compress.c -- compress a memory buffer
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+#include "zlib.h"
+
+/* ===========================================================================
+     Compresses the source buffer into the destination buffer. The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer. Upon entry, destLen is the total size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+    int level;
+{
+    z_stream stream;
+    int err;
+
+    stream.next_in = (Bytef*)source;
+    stream.avail_in = (uInt)sourceLen;
+#ifdef MAXSEG_64K
+    /* Check for source > 64K on 16-bit machine: */
+    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
+#endif
+    stream.next_out = dest;
+    stream.avail_out = (uInt)*destLen;
+    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+
+    stream.zalloc = (alloc_func)0;
+    stream.zfree = (free_func)0;
+    stream.opaque = (voidpf)0;
+
+    err = deflateInit(&stream, level);
+    if (err != Z_OK) return err;
+
+    err = deflate(&stream, Z_FINISH);
+    if (err != Z_STREAM_END) {
+        deflateEnd(&stream);
+        return err == Z_OK ? Z_BUF_ERROR : err;
+    }
+    *destLen = stream.total_out;
+
+    err = deflateEnd(&stream);
+    return err;
+}
+
+/* ===========================================================================
+ */
+int ZEXPORT compress (dest, destLen, source, sourceLen)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+{
+    return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
+}
diff --git a/nx-X11/extras/zlib/configure b/nx-X11/extras/zlib/configure
new file mode 100755
index 000000000..e8942359b
--- /dev/null
+++ b/nx-X11/extras/zlib/configure
@@ -0,0 +1,212 @@
+#!/bin/sh
+# configure script for zlib. This script is needed only if
+# you wish to build a shared library and your system supports them,
+# of if you need special compiler, flags or install directory.
+# Otherwise, you can just use directly "make test; make install"
+#
+# To create a shared library, use "configure --shared"; by default a static
+# library is created. If the primitive shared library support provided here
+# does not work, use ftp://prep.ai.mit.edu/pub/gnu/libtool-*.tar.gz
+#
+# To impose specific compiler or flags or install directory, use for example:
+#    prefix=$HOME CC=cc CFLAGS="-O4" ./configure
+# or for csh/tcsh users:
+#    (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure)
+# LDSHARED is the command to be used to create a shared library
+
+# Incorrect settings of CC or CFLAGS may prevent creating a shared library.
+# If you have problems, try without defining CC and CFLAGS before reporting
+# an error.
+
+LIBS=libz.a
+SHAREDLIB=libz.so
+VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
+AR=${AR-"ar rc"}
+RANLIB=${RANLIB-"ranlib"}
+prefix=${prefix-/usr/local}
+exec_prefix=${exec_prefix-'${prefix}'}
+libdir=${libdir-'${exec_prefix}/lib'}
+includedir=${includedir-'${prefix}/include'}
+shared_ext='.so'
+shared=0
+gcc=0
+old_cc="$CC"
+old_cflags="$CFLAGS"
+
+while test $# -ge 1
+do
+case "$1" in
+    -h* | --h*)
+      echo 'usage:'
+      echo '  configure [--shared] [--prefix=PREFIX]  [--exec_prefix=EXPREFIX]'
+      echo '     [--libdir=LIBDIR] [--includedir=INCLUDEDIR]'
+        exit 0;;
+    -p*=* | --p*=*) prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+    -e*=* | --e*=*) exec_prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+    -l*=* | --libdir=*) libdir=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+    -i*=* | --includedir=*) includedir=`echo $1 | sed 's/[-a-z_]*=//'`;shift;;
+    -p* | --p*) prefix="$2"; shift; shift;;
+    -e* | --e*) exec_prefix="$2"; shift; shift;;
+    -l* | --l*) libdir="$2"; shift; shift;;
+    -i* | --i*) includedir="$2"; shift; shift;;
+    -s* | --s*) shared=1; shift;;
+    esac
+done
+
+test=ztest$$
+cat > $test.c <<EOF
+extern int getchar();
+int hello() {return getchar();}
+EOF
+
+test -z "$CC" && echo Checking for gcc...
+cc=${CC-gcc}
+cflags=${CFLAGS-"-O3"}
+# to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
+case "$cc" in
+  *gcc*) gcc=1;;
+esac
+
+if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
+  CC="$cc"
+  SFLAGS=${CFLAGS-"-fPIC -O3"}
+  CFLAGS="$cflags"
+  case `(uname -s || echo unknown) 2>/dev/null` in
+  Linux | linux) LDSHARED=${LDSHARED-"gcc -shared -Wl,-soname,libz.so.1"};;
+  *)             LDSHARED=${LDSHARED-"gcc -shared"};;
+  esac
+else
+  # find system name and corresponding cc options
+  CC=${CC-cc}
+  case `(uname -sr || echo unknown) 2>/dev/null` in
+  HP-UX*)    SFLAGS=${CFLAGS-"-O +z"}
+	     CFLAGS=${CFLAGS-"-O"}
+#	     LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
+	     LDSHARED=${LDSHARED-"ld -b"}
+	     shared_ext='.sl'
+	     SHAREDLIB='libz.sl';;
+  IRIX*)     SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
+	     CFLAGS=${CFLAGS-"-ansi -O2"}
+	     LDSHARED=${LDSHARED-"cc -shared"};;
+  OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"}
+	     CFLAGS=${CFLAGS-"-O -std1"}
+	     LDSHARED=${LDSHARED-"cc -shared  -Wl,-soname,$SHAREDLIB -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"};;
+  OSF1*)     SFLAGS=${CFLAGS-"-O -std1"}
+	     CFLAGS=${CFLAGS-"-O -std1"}
+	     LDSHARED=${LDSHARED-"cc -shared"};;
+  QNX*)      SFLAGS=${CFLAGS-"-4 -O"}
+             CFLAGS=${CFLAGS-"-4 -O"}
+	     LDSHARED=${LDSHARED-"cc"}
+             RANLIB=${RANLIB-"true"}
+             AR="cc -A";;
+  SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
+	     CFLAGS=${CFLAGS-"-O3"}
+	     LDSHARED=${LDSHARED-"cc -dy -KPIC -G"};;
+  SunOS\ 5*) SFLAGS=${CFLAGS-"-fast -xcg89 -KPIC -R."}
+             CFLAGS=${CFLAGS-"-fast -xcg89"}
+	     LDSHARED=${LDSHARED-"cc -G"};;
+  SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
+	     CFLAGS=${CFLAGS-"-O2"}
+	     LDSHARED=${LDSHARED-"ld"};;
+  UNIX_System_V\ 4.2.0) 
+	     SFLAGS=${CFLAGS-"-KPIC -O"}
+	     CFLAGS=${CFLAGS-"-O"}
+	     LDSHARED=${LDSHARED-"cc -G"};;
+  UNIX_SV\ 4.2MP)
+	     SFLAGS=${CFLAGS-"-Kconform_pic -O"}
+	     CFLAGS=${CFLAGS-"-O"}
+	     LDSHARED=${LDSHARED-"cc -G"};;
+  # send working options for other systems to support@gzip.org
+  *)         SFLAGS=${CFLAGS-"-O"}
+	     CFLAGS=${CFLAGS-"-O"}
+	     LDSHARED=${LDSHARED-"cc -shared"};;
+  esac
+fi
+
+if test $shared -eq 1; then
+  echo Checking for shared library support...
+  # we must test in two steps (cc then ld), required at least on SunOS 4.x
+  if test "`($CC -c $SFLAGS $test.c) 2>&1`" = "" &&
+     test "`($LDSHARED -o $test$shared_ext $test.o) 2>&1`" = ""; then
+    CFLAGS="$SFLAGS"
+    LIBS="$SHAREDLIB.$VER"
+    echo Building shared library $SHAREDLIB.$VER with $CC.
+  elif test -z "$old_cc" -a -z "$old_cflags"; then
+    echo No shared library suppport.
+    shared=0;
+  else
+    echo 'No shared library suppport; try without defining CC and CFLAGS'
+    shared=0;
+  fi
+fi
+if test $shared -eq 0; then
+  LDSHARED="$CC"
+  echo Building static library $LIBS version $VER with $CC.
+fi
+
+cat > $test.c <<EOF
+#include <unistd.h>
+int main() { return 0; }
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  CFLAGS="$CFLAGS -DHAVE_UNISTD_H"
+  echo "Checking for unistd.h... Yes."
+else
+  echo "Checking for unistd.h... No."
+fi
+
+cat > $test.c <<EOF
+#include <errno.h>
+int main() { return 0; }
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  echo "Checking for errno.h...	 Yes."
+else
+  echo "Checking for errno.h...	 No."
+  CFLAGS="$CFLAGS -DNO_ERRNO_H"
+fi
+
+cat > $test.c <<EOF
+#include <sys/types.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+caddr_t hello() {
+  return mmap((caddr_t)0, (off_t)0, PROT_READ, MAP_SHARED, 0, (off_t)0); 
+}
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  CFLAGS="$CFLAGS -DUSE_MMAP"
+  echo Checking for mmap support... Yes.
+else
+  echo Checking for mmap support... No.
+fi
+
+CPP=${CPP-"$CC -E"}
+case $CFLAGS in
+  *ASMV*)
+    if test "`nm $test.o | grep _hello`" = ""; then
+      CPP="$CPP -DNO_UNDERLINE"
+      echo Checking for underline in external names... No.
+    else
+      echo Checking for underline in external names... Yes.
+    fi;;
+esac
+
+rm -f $test.[co] $test$shared_ext
+
+# udpate Makefile
+sed < Makefile.in "
+/^CC *=/s%=.*%=$CC%
+/^CFLAGS *=/s%=.*%=$CFLAGS%
+/^CPP *=/s%=.*%=$CPP%
+/^LDSHARED *=/s%=.*%=$LDSHARED%
+/^LIBS *=/s%=.*%=$LIBS%
+/^SHAREDLIB *=/s%=.*%=$SHAREDLIB%
+/^AR *=/s%=.*%=$AR%
+/^RANLIB *=/s%=.*%=$RANLIB%
+/^VER *=/s%=.*%=$VER%
+/^prefix *=/s%=.*%=$prefix%
+/^exec_prefix *=/s%=.*%=$exec_prefix%
+/^libdir *=/s%=.*%=$libdir%
+/^includedir *=/s%=.*%=$includedir%
+" > Makefile
diff --git a/nx-X11/extras/zlib/crc32.c b/nx-X11/extras/zlib/crc32.c
new file mode 100644
index 000000000..21f2b1e6f
--- /dev/null
+++ b/nx-X11/extras/zlib/crc32.c
@@ -0,0 +1,160 @@
+/* crc32.c -- compute the CRC-32 of a data stream
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+#include "zlib.h"
+
+#define local static
+
+#ifdef DYNAMIC_CRC_TABLE
+
+local int crc_table_empty = 1;
+local uLongf crc_table[256];
+local void make_crc_table OF((void));
+
+/*
+  Generate a table for a byte-wise 32-bit CRC calculation on the polynomial:
+  x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
+
+  Polynomials over GF(2) are represented in binary, one bit per coefficient,
+  with the lowest powers in the most significant bit.  Then adding polynomials
+  is just exclusive-or, and multiplying a polynomial by x is a right shift by
+  one.  If we call the above polynomial p, and represent a byte as the
+  polynomial q, also with the lowest power in the most significant bit (so the
+  byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
+  where a mod b means the remainder after dividing a by b.
+
+  This calculation is done using the shift-register method of multiplying and
+  taking the remainder.  The register is initialized to zero, and for each
+  incoming bit, x^32 is added mod p to the register if the bit is a one (where
+  x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
+  x (which is shifting right by one and adding x^32 mod p if the bit shifted
+  out is a one).  We start with the highest power (least significant bit) of
+  q and repeat for all eight bits of q.
+
+  The table is simply the CRC of all possible eight bit values.  This is all
+  the information needed to generate CRC's on data a byte at a time for all
+  combinations of CRC register values and incoming bytes.
+*/
+local void make_crc_table()
+{
+  uLong c;
+  int n, k;
+  uLong poly;            /* polynomial exclusive-or pattern */
+  /* terms of polynomial defining this crc (except x^32): */
+  static const Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+
+  /* make exclusive-or pattern from polynomial (0xedb88320L) */
+  poly = 0L;
+  for (n = 0; n < sizeof(p)/sizeof(Byte); n++)
+    poly |= 1L << (31 - p[n]);
+ 
+  for (n = 0; n < 256; n++)
+  {
+    c = (uLong)n;
+    for (k = 0; k < 8; k++)
+      c = c & 1 ? poly ^ (c >> 1) : c >> 1;
+    crc_table[n] = c;
+  }
+  crc_table_empty = 0;
+}
+#else
+/* ========================================================================
+ * Table of CRC-32's of all single-byte values (made by make_crc_table)
+ */
+local const uLongf crc_table[256] = {
+  0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
+  0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
+  0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
+  0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
+  0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
+  0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
+  0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
+  0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
+  0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
+  0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
+  0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
+  0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
+  0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
+  0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
+  0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
+  0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
+  0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
+  0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
+  0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
+  0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
+  0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
+  0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
+  0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
+  0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
+  0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
+  0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
+  0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
+  0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
+  0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
+  0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
+  0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
+  0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
+  0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
+  0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
+  0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
+  0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
+  0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
+  0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
+  0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
+  0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
+  0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
+  0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
+  0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
+  0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
+  0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
+  0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
+  0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
+  0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
+  0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
+  0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
+  0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
+  0x2d02ef8dL
+};
+#endif
+
+/* =========================================================================
+ * This function can be used by asm versions of crc32()
+ */
+const uLongf * ZEXPORT get_crc_table()
+{
+#ifdef DYNAMIC_CRC_TABLE
+  if (crc_table_empty) make_crc_table();
+#endif
+  return (const uLongf *)crc_table;
+}
+
+/* ========================================================================= */
+#define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8);
+#define DO2(buf)  DO1(buf); DO1(buf);
+#define DO4(buf)  DO2(buf); DO2(buf);
+#define DO8(buf)  DO4(buf); DO4(buf);
+
+/* ========================================================================= */
+uLong ZEXPORT crc32(crc, buf, len)
+    uLong crc;
+    const Bytef *buf;
+    uInt len;
+{
+    if (buf == Z_NULL) return 0L;
+#ifdef DYNAMIC_CRC_TABLE
+    if (crc_table_empty)
+      make_crc_table();
+#endif
+    crc = crc ^ 0xffffffffL;
+    while (len >= 8)
+    {
+      DO8(buf);
+      len -= 8;
+    }
+    if (len) do {
+      DO1(buf);
+    } while (--len);
+    return crc ^ 0xffffffffL;
+}
diff --git a/nx-X11/extras/zlib/deflate.c b/nx-X11/extras/zlib/deflate.c
new file mode 100644
index 000000000..355e5690b
--- /dev/null
+++ b/nx-X11/extras/zlib/deflate.c
@@ -0,0 +1,1348 @@
+/* deflate.c -- compress data using the deflation algorithm
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/*
+ *  ALGORITHM
+ *
+ *      The "deflation" process depends on being able to identify portions
+ *      of the input text which are identical to earlier input (within a
+ *      sliding window trailing behind the input currently being processed).
+ *
+ *      The most straightforward technique turns out to be the fastest for
+ *      most input files: try all possible matches and select the longest.
+ *      The key feature of this algorithm is that insertions into the string
+ *      dictionary are very simple and thus fast, and deletions are avoided
+ *      completely. Insertions are performed at each input character, whereas
+ *      string matches are performed only when the previous match ends. So it
+ *      is preferable to spend more time in matches to allow very fast string
+ *      insertions and avoid deletions. The matching algorithm for small
+ *      strings is inspired from that of Rabin & Karp. A brute force approach
+ *      is used to find longer strings when a small match has been found.
+ *      A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
+ *      (by Leonid Broukhis).
+ *         A previous version of this file used a more sophisticated algorithm
+ *      (by Fiala and Greene) which is guaranteed to run in linear amortized
+ *      time, but has a larger average cost, uses more memory and is patented.
+ *      However the F&G algorithm may be faster for some highly redundant
+ *      files if the parameter max_chain_length (described below) is too large.
+ *
+ *  ACKNOWLEDGEMENTS
+ *
+ *      The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
+ *      I found it in 'freeze' written by Leonid Broukhis.
+ *      Thanks to many people for bug reports and testing.
+ *
+ *  REFERENCES
+ *
+ *      Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
+ *      Available in ftp://ds.internic.net/rfc/rfc1951.txt
+ *
+ *      A description of the Rabin and Karp algorithm is given in the book
+ *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
+ *
+ *      Fiala,E.R., and Greene,D.H.
+ *         Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
+ *
+ */
+
+#include "deflate.h"
+
+const char deflate_copyright[] =
+   " deflate 1.1.4 Copyright 1995-2002 Jean-loup Gailly ";
+/*
+  If you use the zlib library in a product, an acknowledgment is welcome
+  in the documentation of your product. If for some reason you cannot
+  include such an acknowledgment, I would appreciate that you keep this
+  copyright string in the executable of your product.
+ */
+
+/* ===========================================================================
+ *  Function prototypes.
+ */
+typedef enum {
+    need_more,      /* block not completed, need more input or more output */
+    block_done,     /* block flush performed */
+    finish_started, /* finish started, need only more output at next deflate */
+    finish_done     /* finish done, accept no more input or output */
+} block_state;
+
+typedef block_state (*compress_func) OF((deflate_state *s, int flush));
+/* Compression function. Returns the block state after the call. */
+
+local void fill_window    OF((deflate_state *s));
+local block_state deflate_stored OF((deflate_state *s, int flush));
+local block_state deflate_fast   OF((deflate_state *s, int flush));
+local block_state deflate_slow   OF((deflate_state *s, int flush));
+local void lm_init        OF((deflate_state *s));
+local void putShortMSB    OF((deflate_state *s, uInt b));
+local void flush_pending  OF((z_streamp strm));
+local int read_buf        OF((z_streamp strm, Bytef *buf, unsigned size));
+#ifdef ASMV
+      void match_init OF((void)); /* asm code initialization */
+      uInt longest_match  OF((deflate_state *s, IPos cur_match));
+#else
+local uInt longest_match  OF((deflate_state *s, IPos cur_match));
+#endif
+
+#ifdef DEBUG
+local  void check_match OF((deflate_state *s, IPos start, IPos match,
+                            int length));
+#endif
+
+/* ===========================================================================
+ * Local data
+ */
+
+#define NIL 0
+/* Tail of hash chains */
+
+#ifndef TOO_FAR
+#  define TOO_FAR 4096
+#endif
+/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
+
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+/* Minimum amount of lookahead, except at the end of the input file.
+ * See deflate.c for comments about the MIN_MATCH+1.
+ */
+
+/* Values for max_lazy_match, good_match and max_chain_length, depending on
+ * the desired pack level (0..9). The values given below have been tuned to
+ * exclude worst case performance for pathological files. Better values may be
+ * found for specific files.
+ */
+typedef struct config_s {
+   ush good_length; /* reduce lazy search above this match length */
+   ush max_lazy;    /* do not perform lazy search above this match length */
+   ush nice_length; /* quit search above this match length */
+   ush max_chain;
+   compress_func func;
+} config;
+
+local const config configuration_table[10] = {
+/*      good lazy nice chain */
+/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
+/* 1 */ {4,    4,  8,    4, deflate_fast}, /* maximum speed, no lazy matches */
+/* 2 */ {4,    5, 16,    8, deflate_fast},
+/* 3 */ {4,    6, 32,   32, deflate_fast},
+
+/* 4 */ {4,    4, 16,   16, deflate_slow},  /* lazy matches */
+/* 5 */ {8,   16, 32,   32, deflate_slow},
+/* 6 */ {8,   16, 128, 128, deflate_slow},
+/* 7 */ {8,   32, 128, 256, deflate_slow},
+/* 8 */ {32, 128, 258, 1024, deflate_slow},
+/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* maximum compression */
+
+/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
+ * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
+ * meaning.
+ */
+
+#define EQUAL 0
+/* result of memcmp for equal strings */
+
+struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
+
+/* ===========================================================================
+ * Update a hash value with the given input byte
+ * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
+ *    input characters, so that a running hash key can be computed from the
+ *    previous key instead of complete recalculation each time.
+ */
+#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
+
+
+/* ===========================================================================
+ * Insert string str in the dictionary and set match_head to the previous head
+ * of the hash chain (the most recent string with same hash key). Return
+ * the previous length of the hash chain.
+ * If this file is compiled with -DFASTEST, the compression level is forced
+ * to 1, and no hash chains are maintained.
+ * IN  assertion: all calls to to INSERT_STRING are made with consecutive
+ *    input characters and the first MIN_MATCH bytes of str are valid
+ *    (except for the last MIN_MATCH-1 bytes of the input file).
+ */
+#ifdef FASTEST
+#define INSERT_STRING(s, str, match_head) \
+   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+    match_head = s->head[s->ins_h], \
+    s->head[s->ins_h] = (Pos)(str))
+#else
+#define INSERT_STRING(s, str, match_head) \
+   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+    s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \
+    s->head[s->ins_h] = (Pos)(str))
+#endif
+
+/* ===========================================================================
+ * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
+ * prev[] will be initialized on the fly.
+ */
+#define CLEAR_HASH(s) \
+    s->head[s->hash_size-1] = NIL; \
+    zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
+
+/* ========================================================================= */
+int ZEXPORT deflateInit_(strm, level, version, stream_size)
+    z_streamp strm;
+    int level;
+    const char *version;
+    int stream_size;
+{
+    return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
+			 Z_DEFAULT_STRATEGY, version, stream_size);
+    /* To do: ignore strm->next_in if we use it as window */
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
+		  version, stream_size)
+    z_streamp strm;
+    int  level;
+    int  method;
+    int  windowBits;
+    int  memLevel;
+    int  strategy;
+    const char *version;
+    int stream_size;
+{
+    deflate_state *s;
+    int noheader = 0;
+    static const char* my_version = ZLIB_VERSION;
+
+    ushf *overlay;
+    /* We overlay pending_buf and d_buf+l_buf. This works since the average
+     * output size for (length,distance) codes is <= 24 bits.
+     */
+
+    if (version == Z_NULL || version[0] != my_version[0] ||
+        stream_size != sizeof(z_stream)) {
+	return Z_VERSION_ERROR;
+    }
+    if (strm == Z_NULL) return Z_STREAM_ERROR;
+
+    strm->msg = Z_NULL;
+    if (strm->zalloc == Z_NULL) {
+	strm->zalloc = zcalloc;
+	strm->opaque = (voidpf)0;
+    }
+    if (strm->zfree == Z_NULL) strm->zfree = zcfree;
+
+    if (level == Z_DEFAULT_COMPRESSION) level = 6;
+#ifdef FASTEST
+    level = 1;
+#endif
+
+    if (windowBits < 0) { /* undocumented feature: suppress zlib header */
+        noheader = 1;
+        windowBits = -windowBits;
+    }
+    if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
+        windowBits < 9 || windowBits > 15 || level < 0 || level > 9 ||
+	strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
+        return Z_STREAM_ERROR;
+    }
+    s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
+    if (s == Z_NULL) return Z_MEM_ERROR;
+    strm->state = (struct internal_state FAR *)s;
+    s->strm = strm;
+
+    s->noheader = noheader;
+    s->w_bits = windowBits;
+    s->w_size = 1 << s->w_bits;
+    s->w_mask = s->w_size - 1;
+
+    s->hash_bits = memLevel + 7;
+    s->hash_size = 1 << s->hash_bits;
+    s->hash_mask = s->hash_size - 1;
+    s->hash_shift =  ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
+
+    s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
+    s->prev   = (Posf *)  ZALLOC(strm, s->w_size, sizeof(Pos));
+    s->head   = (Posf *)  ZALLOC(strm, s->hash_size, sizeof(Pos));
+
+    s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
+
+    overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
+    s->pending_buf = (uchf *) overlay;
+    s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
+
+    if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
+        s->pending_buf == Z_NULL) {
+        strm->msg = (char*)ERR_MSG(Z_MEM_ERROR);
+        deflateEnd (strm);
+        return Z_MEM_ERROR;
+    }
+    s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
+    s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
+
+    s->level = level;
+    s->strategy = strategy;
+    s->method = (Byte)method;
+
+    return deflateReset(strm);
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
+    z_streamp strm;
+    const Bytef *dictionary;
+    uInt  dictLength;
+{
+    deflate_state *s;
+    uInt length = dictLength;
+    uInt n;
+    IPos hash_head = 0;
+
+    if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL ||
+        strm->state->status != INIT_STATE) return Z_STREAM_ERROR;
+
+    s = strm->state;
+    strm->adler = adler32(strm->adler, dictionary, dictLength);
+
+    if (length < MIN_MATCH) return Z_OK;
+    if (length > MAX_DIST(s)) {
+	length = MAX_DIST(s);
+#ifndef USE_DICT_HEAD
+	dictionary += dictLength - length; /* use the tail of the dictionary */
+#endif
+    }
+    zmemcpy(s->window, dictionary, length);
+    s->strstart = length;
+    s->block_start = (long)length;
+
+    /* Insert all strings in the hash table (except for the last two bytes).
+     * s->lookahead stays null, so s->ins_h will be recomputed at the next
+     * call of fill_window.
+     */
+    s->ins_h = s->window[0];
+    UPDATE_HASH(s, s->ins_h, s->window[1]);
+    for (n = 0; n <= length - MIN_MATCH; n++) {
+	INSERT_STRING(s, n, hash_head);
+    }
+    if (hash_head) hash_head = 0;  /* to make compiler happy */
+    return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateReset (strm)
+    z_streamp strm;
+{
+    deflate_state *s;
+    
+    if (strm == Z_NULL || strm->state == Z_NULL ||
+        strm->zalloc == Z_NULL || strm->zfree == Z_NULL) return Z_STREAM_ERROR;
+
+    strm->total_in = strm->total_out = 0;
+    strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
+    strm->data_type = Z_UNKNOWN;
+
+    s = (deflate_state *)strm->state;
+    s->pending = 0;
+    s->pending_out = s->pending_buf;
+
+    if (s->noheader < 0) {
+        s->noheader = 0; /* was set to -1 by deflate(..., Z_FINISH); */
+    }
+    s->status = s->noheader ? BUSY_STATE : INIT_STATE;
+    strm->adler = 1;
+    s->last_flush = Z_NO_FLUSH;
+
+    _tr_init(s);
+    lm_init(s);
+
+    return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateParams(strm, level, strategy)
+    z_streamp strm;
+    int level;
+    int strategy;
+{
+    deflate_state *s;
+    compress_func func;
+    int err = Z_OK;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    s = strm->state;
+
+    if (level == Z_DEFAULT_COMPRESSION) {
+	level = 6;
+    }
+    if (level < 0 || level > 9 || strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
+	return Z_STREAM_ERROR;
+    }
+    func = configuration_table[s->level].func;
+
+    if (func != configuration_table[level].func && strm->total_in != 0) {
+	/* Flush the last buffer: */
+	err = deflate(strm, Z_PARTIAL_FLUSH);
+    }
+    if (s->level != level) {
+	s->level = level;
+	s->max_lazy_match   = configuration_table[level].max_lazy;
+	s->good_match       = configuration_table[level].good_length;
+	s->nice_match       = configuration_table[level].nice_length;
+	s->max_chain_length = configuration_table[level].max_chain;
+    }
+    s->strategy = strategy;
+    return err;
+}
+
+/* =========================================================================
+ * Put a short in the pending buffer. The 16-bit value is put in MSB order.
+ * IN assertion: the stream state is correct and there is enough room in
+ * pending_buf.
+ */
+local void putShortMSB (s, b)
+    deflate_state *s;
+    uInt b;
+{
+    put_byte(s, (Byte)(b >> 8));
+    put_byte(s, (Byte)(b & 0xff));
+}   
+
+/* =========================================================================
+ * Flush as much pending output as possible. All deflate() output goes
+ * through this function so some applications may wish to modify it
+ * to avoid allocating a large strm->next_out buffer and copying into it.
+ * (See also read_buf()).
+ */
+local void flush_pending(strm)
+    z_streamp strm;
+{
+    unsigned len = strm->state->pending;
+
+    if (len > strm->avail_out) len = strm->avail_out;
+    if (len == 0) return;
+
+    zmemcpy(strm->next_out, strm->state->pending_out, len);
+    strm->next_out  += len;
+    strm->state->pending_out  += len;
+    strm->total_out += len;
+    strm->avail_out  -= len;
+    strm->state->pending -= len;
+    if (strm->state->pending == 0) {
+        strm->state->pending_out = strm->state->pending_buf;
+    }
+}
+
+/* ========================================================================= */
+int ZEXPORT deflate (strm, flush)
+    z_streamp strm;
+    int flush;
+{
+    int old_flush; /* value of flush param for previous deflate call */
+    deflate_state *s;
+
+    if (strm == Z_NULL || strm->state == Z_NULL ||
+	flush > Z_FINISH || flush < 0) {
+        return Z_STREAM_ERROR;
+    }
+    s = strm->state;
+
+    if (strm->next_out == Z_NULL ||
+        (strm->next_in == Z_NULL && strm->avail_in != 0) ||
+	(s->status == FINISH_STATE && flush != Z_FINISH)) {
+        ERR_RETURN(strm, Z_STREAM_ERROR);
+    }
+    if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
+
+    s->strm = strm; /* just in case */
+    old_flush = s->last_flush;
+    s->last_flush = flush;
+
+    /* Write the zlib header */
+    if (s->status == INIT_STATE) {
+
+        uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
+        uInt level_flags = (s->level-1) >> 1;
+
+        if (level_flags > 3) level_flags = 3;
+        header |= (level_flags << 6);
+	if (s->strstart != 0) header |= PRESET_DICT;
+        header += 31 - (header % 31);
+
+        s->status = BUSY_STATE;
+        putShortMSB(s, header);
+
+	/* Save the adler32 of the preset dictionary: */
+	if (s->strstart != 0) {
+	    putShortMSB(s, (uInt)(strm->adler >> 16));
+	    putShortMSB(s, (uInt)(strm->adler & 0xffff));
+	}
+	strm->adler = 1L;
+    }
+
+    /* Flush as much pending output as possible */
+    if (s->pending != 0) {
+        flush_pending(strm);
+        if (strm->avail_out == 0) {
+	    /* Since avail_out is 0, deflate will be called again with
+	     * more output space, but possibly with both pending and
+	     * avail_in equal to zero. There won't be anything to do,
+	     * but this is not an error situation so make sure we
+	     * return OK instead of BUF_ERROR at next call of deflate:
+             */
+	    s->last_flush = -1;
+	    return Z_OK;
+	}
+
+    /* Make sure there is something to do and avoid duplicate consecutive
+     * flushes. For repeated and useless calls with Z_FINISH, we keep
+     * returning Z_STREAM_END instead of Z_BUFF_ERROR.
+     */
+    } else if (strm->avail_in == 0 && flush <= old_flush &&
+	       flush != Z_FINISH) {
+        ERR_RETURN(strm, Z_BUF_ERROR);
+    }
+
+    /* User must not provide more input after the first FINISH: */
+    if (s->status == FINISH_STATE && strm->avail_in != 0) {
+        ERR_RETURN(strm, Z_BUF_ERROR);
+    }
+
+    /* Start a new block or continue the current one.
+     */
+    if (strm->avail_in != 0 || s->lookahead != 0 ||
+        (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
+        block_state bstate;
+
+	bstate = (*(configuration_table[s->level].func))(s, flush);
+
+        if (bstate == finish_started || bstate == finish_done) {
+            s->status = FINISH_STATE;
+        }
+        if (bstate == need_more || bstate == finish_started) {
+	    if (strm->avail_out == 0) {
+	        s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
+	    }
+	    return Z_OK;
+	    /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
+	     * of deflate should use the same flush parameter to make sure
+	     * that the flush is complete. So we don't have to output an
+	     * empty block here, this will be done at next call. This also
+	     * ensures that for a very small output buffer, we emit at most
+	     * one empty block.
+	     */
+	}
+        if (bstate == block_done) {
+            if (flush == Z_PARTIAL_FLUSH) {
+                _tr_align(s);
+            } else { /* FULL_FLUSH or SYNC_FLUSH */
+                _tr_stored_block(s, (char*)0, 0L, 0);
+                /* For a full flush, this empty block will be recognized
+                 * as a special marker by inflate_sync().
+                 */
+                if (flush == Z_FULL_FLUSH) {
+                    CLEAR_HASH(s);             /* forget history */
+                }
+            }
+            flush_pending(strm);
+	    if (strm->avail_out == 0) {
+	      s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
+	      return Z_OK;
+	    }
+        }
+    }
+    Assert(strm->avail_out > 0, "bug2");
+
+    if (flush != Z_FINISH) return Z_OK;
+    if (s->noheader) return Z_STREAM_END;
+
+    /* Write the zlib trailer (adler32) */
+    putShortMSB(s, (uInt)(strm->adler >> 16));
+    putShortMSB(s, (uInt)(strm->adler & 0xffff));
+    flush_pending(strm);
+    /* If avail_out is zero, the application will call deflate again
+     * to flush the rest.
+     */
+    s->noheader = -1; /* write the trailer only once! */
+    return s->pending != 0 ? Z_OK : Z_STREAM_END;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateEnd (strm)
+    z_streamp strm;
+{
+    int status;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+
+    status = strm->state->status;
+    if (status != INIT_STATE && status != BUSY_STATE &&
+	status != FINISH_STATE) {
+      return Z_STREAM_ERROR;
+    }
+
+    /* Deallocate in reverse order of allocations: */
+    TRY_FREE(strm, strm->state->pending_buf);
+    TRY_FREE(strm, strm->state->head);
+    TRY_FREE(strm, strm->state->prev);
+    TRY_FREE(strm, strm->state->window);
+
+    ZFREE(strm, strm->state);
+    strm->state = Z_NULL;
+
+    return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
+}
+
+/* =========================================================================
+ * Copy the source state to the destination state.
+ * To simplify the source, this is not supported for 16-bit MSDOS (which
+ * doesn't have enough memory anyway to duplicate compression states).
+ */
+int ZEXPORT deflateCopy (dest, source)
+    z_streamp dest;
+    z_streamp source;
+{
+#ifdef MAXSEG_64K
+    return Z_STREAM_ERROR;
+#else
+    deflate_state *ds;
+    deflate_state *ss;
+    ushf *overlay;
+
+
+    if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
+        return Z_STREAM_ERROR;
+    }
+
+    ss = source->state;
+
+    *dest = *source;
+
+    ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
+    if (ds == Z_NULL) return Z_MEM_ERROR;
+    dest->state = (struct internal_state FAR *) ds;
+    *ds = *ss;
+    ds->strm = dest;
+
+    ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
+    ds->prev   = (Posf *)  ZALLOC(dest, ds->w_size, sizeof(Pos));
+    ds->head   = (Posf *)  ZALLOC(dest, ds->hash_size, sizeof(Pos));
+    overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
+    ds->pending_buf = (uchf *) overlay;
+
+    if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
+        ds->pending_buf == Z_NULL) {
+        deflateEnd (dest);
+        return Z_MEM_ERROR;
+    }
+    /* following zmemcpy do not work for 16-bit MSDOS */
+    zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
+    zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
+    zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
+    zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
+
+    ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
+    ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
+    ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
+
+    ds->l_desc.dyn_tree = ds->dyn_ltree;
+    ds->d_desc.dyn_tree = ds->dyn_dtree;
+    ds->bl_desc.dyn_tree = ds->bl_tree;
+
+    return Z_OK;
+#endif
+}
+
+/* ===========================================================================
+ * Read a new buffer from the current input stream, update the adler32
+ * and total number of bytes read.  All deflate() input goes through
+ * this function so some applications may wish to modify it to avoid
+ * allocating a large strm->next_in buffer and copying from it.
+ * (See also flush_pending()).
+ */
+local int read_buf(strm, buf, size)
+    z_streamp strm;
+    Bytef *buf;
+    unsigned size;
+{
+    unsigned len = strm->avail_in;
+
+    if (len > size) len = size;
+    if (len == 0) return 0;
+
+    strm->avail_in  -= len;
+
+    if (!strm->state->noheader) {
+        strm->adler = adler32(strm->adler, strm->next_in, len);
+    }
+    zmemcpy(buf, strm->next_in, len);
+    strm->next_in  += len;
+    strm->total_in += len;
+
+    return (int)len;
+}
+
+/* ===========================================================================
+ * Initialize the "longest match" routines for a new zlib stream
+ */
+local void lm_init (s)
+    deflate_state *s;
+{
+    s->window_size = (ulg)2L*s->w_size;
+
+    CLEAR_HASH(s);
+
+    /* Set the default configuration parameters:
+     */
+    s->max_lazy_match   = configuration_table[s->level].max_lazy;
+    s->good_match       = configuration_table[s->level].good_length;
+    s->nice_match       = configuration_table[s->level].nice_length;
+    s->max_chain_length = configuration_table[s->level].max_chain;
+
+    s->strstart = 0;
+    s->block_start = 0L;
+    s->lookahead = 0;
+    s->match_length = s->prev_length = MIN_MATCH-1;
+    s->match_available = 0;
+    s->ins_h = 0;
+#ifdef ASMV
+    match_init(); /* initialize the asm code */
+#endif
+}
+
+/* ===========================================================================
+ * Set match_start to the longest match starting at the given string and
+ * return its length. Matches shorter or equal to prev_length are discarded,
+ * in which case the result is equal to prev_length and match_start is
+ * garbage.
+ * IN assertions: cur_match is the head of the hash chain for the current
+ *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
+ * OUT assertion: the match length is not greater than s->lookahead.
+ */
+#ifndef ASMV
+/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
+ * match.S. The code will be functionally equivalent.
+ */
+#ifndef FASTEST
+local uInt longest_match(s, cur_match)
+    deflate_state *s;
+    IPos cur_match;                             /* current match */
+{
+    unsigned chain_length = s->max_chain_length;/* max hash chain length */
+    register Bytef *scan = s->window + s->strstart; /* current string */
+    register Bytef *match;                       /* matched string */
+    register int len;                           /* length of current match */
+    int best_len = s->prev_length;              /* best match length so far */
+    int nice_match = s->nice_match;             /* stop if match long enough */
+    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+        s->strstart - (IPos)MAX_DIST(s) : NIL;
+    /* Stop when cur_match becomes <= limit. To simplify the code,
+     * we prevent matches with the string of window index 0.
+     */
+    Posf *prev = s->prev;
+    uInt wmask = s->w_mask;
+
+#ifdef UNALIGNED_OK
+    /* Compare two bytes at a time. Note: this is not always beneficial.
+     * Try with and without -DUNALIGNED_OK to check.
+     */
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
+    register ush scan_start = *(ushf*)scan;
+    register ush scan_end   = *(ushf*)(scan+best_len-1);
+#else
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+    register Byte scan_end1  = scan[best_len-1];
+    register Byte scan_end   = scan[best_len];
+#endif
+
+    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+     * It is easy to get rid of this optimization if necessary.
+     */
+    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+    /* Do not waste too much time if we already have a good match: */
+    if (s->prev_length >= s->good_match) {
+        chain_length >>= 2;
+    }
+    /* Do not look for matches beyond the end of the input. This is necessary
+     * to make deflate deterministic.
+     */
+    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+    do {
+        Assert(cur_match < s->strstart, "no future");
+        match = s->window + cur_match;
+
+        /* Skip to next match if the match length cannot increase
+         * or if the match length is less than 2:
+         */
+#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
+        /* This code assumes sizeof(unsigned short) == 2. Do not use
+         * UNALIGNED_OK if your compiler uses a different size.
+         */
+        if (*(ushf*)(match+best_len-1) != scan_end ||
+            *(ushf*)match != scan_start) continue;
+
+        /* It is not necessary to compare scan[2] and match[2] since they are
+         * always equal when the other bytes match, given that the hash keys
+         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
+         * strstart+3, +5, ... up to strstart+257. We check for insufficient
+         * lookahead only every 4th comparison; the 128th check will be made
+         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
+         * necessary to put more guard bytes at the end of the window, or
+         * to check more often for insufficient lookahead.
+         */
+        Assert(scan[2] == match[2], "scan[2]?");
+        scan++, match++;
+        do {
+        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 scan < strend);
+        /* The funny "do {}" generates better code on most compilers */
+
+        /* Here, scan <= window+strstart+257 */
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+        if (*scan == *match) scan++;
+
+        len = (MAX_MATCH - 1) - (int)(strend-scan);
+        scan = strend - (MAX_MATCH-1);
+
+#else /* UNALIGNED_OK */
+
+        if (match[best_len]   != scan_end  ||
+            match[best_len-1] != scan_end1 ||
+            *match            != *scan     ||
+            *++match          != scan[1])      continue;
+
+        /* The check at best_len-1 can be removed because it will be made
+         * again later. (This heuristic is not always a win.)
+         * It is not necessary to compare scan[2] and match[2] since they
+         * are always equal when the other bytes match, given that
+         * the hash keys are equal and that HASH_BITS >= 8.
+         */
+        scan += 2, match++;
+        Assert(*scan == *match, "match[2]?");
+
+        /* We check for insufficient lookahead only every 8th comparison;
+         * the 256th check will be made at strstart+258.
+         */
+        do {
+        } while (*++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 scan < strend);
+
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+        len = MAX_MATCH - (int)(strend - scan);
+        scan = strend - MAX_MATCH;
+
+#endif /* UNALIGNED_OK */
+
+        if (len > best_len) {
+            s->match_start = cur_match;
+            best_len = len;
+            if (len >= nice_match) break;
+#ifdef UNALIGNED_OK
+            scan_end = *(ushf*)(scan+best_len-1);
+#else
+            scan_end1  = scan[best_len-1];
+            scan_end   = scan[best_len];
+#endif
+        }
+    } while ((cur_match = prev[cur_match & wmask]) > limit
+             && --chain_length != 0);
+
+    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+    return s->lookahead;
+}
+
+#else /* FASTEST */
+/* ---------------------------------------------------------------------------
+ * Optimized version for level == 1 only
+ */
+local uInt longest_match(s, cur_match)
+    deflate_state *s;
+    IPos cur_match;                             /* current match */
+{
+    register Bytef *scan = s->window + s->strstart; /* current string */
+    register Bytef *match;                       /* matched string */
+    register int len;                           /* length of current match */
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+
+    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+     * It is easy to get rid of this optimization if necessary.
+     */
+    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+    Assert(cur_match < s->strstart, "no future");
+
+    match = s->window + cur_match;
+
+    /* Return failure if the match length is less than 2:
+     */
+    if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
+
+    /* The check at best_len-1 can be removed because it will be made
+     * again later. (This heuristic is not always a win.)
+     * It is not necessary to compare scan[2] and match[2] since they
+     * are always equal when the other bytes match, given that
+     * the hash keys are equal and that HASH_BITS >= 8.
+     */
+    scan += 2, match += 2;
+    Assert(*scan == *match, "match[2]?");
+
+    /* We check for insufficient lookahead only every 8th comparison;
+     * the 256th check will be made at strstart+258.
+     */
+    do {
+    } while (*++scan == *++match && *++scan == *++match &&
+	     *++scan == *++match && *++scan == *++match &&
+	     *++scan == *++match && *++scan == *++match &&
+	     *++scan == *++match && *++scan == *++match &&
+	     scan < strend);
+
+    Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+    len = MAX_MATCH - (int)(strend - scan);
+
+    if (len < MIN_MATCH) return MIN_MATCH - 1;
+
+    s->match_start = cur_match;
+    return len <= s->lookahead ? len : s->lookahead;
+}
+#endif /* FASTEST */
+#endif /* ASMV */
+
+#ifdef DEBUG
+/* ===========================================================================
+ * Check that the match at match_start is indeed a match.
+ */
+local void check_match(s, start, match, length)
+    deflate_state *s;
+    IPos start, match;
+    int length;
+{
+    /* check that the match is indeed a match */
+    if (zmemcmp(s->window + match,
+                s->window + start, length) != EQUAL) {
+        fprintf(stderr, " start %u, match %u, length %d\n",
+		start, match, length);
+        do {
+	    fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
+	} while (--length != 0);
+        z_error("invalid match");
+    }
+    if (z_verbose > 1) {
+        fprintf(stderr,"\\[%d,%d]", start-match, length);
+        do { putc(s->window[start++], stderr); } while (--length != 0);
+    }
+}
+#else
+#  define check_match(s, start, match, length)
+#endif
+
+/* ===========================================================================
+ * Fill the window when the lookahead becomes insufficient.
+ * Updates strstart and lookahead.
+ *
+ * IN assertion: lookahead < MIN_LOOKAHEAD
+ * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
+ *    At least one byte has been read, or avail_in == 0; reads are
+ *    performed for at least two bytes (required for the zip translate_eol
+ *    option -- not supported here).
+ */
+local void fill_window(s)
+    deflate_state *s;
+{
+    register unsigned n, m;
+    register Posf *p;
+    unsigned more;    /* Amount of free space at the end of the window. */
+    uInt wsize = s->w_size;
+
+    do {
+        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
+
+        /* Deal with !@#$% 64K limit: */
+        if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
+            more = wsize;
+
+        } else if (more == (unsigned)(-1)) {
+            /* Very unlikely, but possible on 16 bit machine if strstart == 0
+             * and lookahead == 1 (input done one byte at time)
+             */
+            more--;
+
+        /* If the window is almost full and there is insufficient lookahead,
+         * move the upper half to the lower one to make room in the upper half.
+         */
+        } else if (s->strstart >= wsize+MAX_DIST(s)) {
+
+            zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
+            s->match_start -= wsize;
+            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
+            s->block_start -= (long) wsize;
+
+            /* Slide the hash table (could be avoided with 32 bit values
+               at the expense of memory usage). We slide even when level == 0
+               to keep the hash table consistent if we switch back to level > 0
+               later. (Using level 0 permanently is not an optimal usage of
+               zlib, so we don't care about this pathological case.)
+             */
+	    n = s->hash_size;
+	    p = &s->head[n];
+	    do {
+		m = *--p;
+		*p = (Pos)(m >= wsize ? m-wsize : NIL);
+	    } while (--n);
+
+	    n = wsize;
+#ifndef FASTEST
+	    p = &s->prev[n];
+	    do {
+		m = *--p;
+		*p = (Pos)(m >= wsize ? m-wsize : NIL);
+		/* If n is not on any hash chain, prev[n] is garbage but
+		 * its value will never be used.
+		 */
+	    } while (--n);
+#endif
+            more += wsize;
+        }
+        if (s->strm->avail_in == 0) return;
+
+        /* If there was no sliding:
+         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
+         *    more == window_size - lookahead - strstart
+         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
+         * => more >= window_size - 2*WSIZE + 2
+         * In the BIG_MEM or MMAP case (not yet supported),
+         *   window_size == input_size + MIN_LOOKAHEAD  &&
+         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
+         * Otherwise, window_size == 2*WSIZE so more >= 2.
+         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
+         */
+        Assert(more >= 2, "more < 2");
+
+        n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
+        s->lookahead += n;
+
+        /* Initialize the hash value now that we have some input: */
+        if (s->lookahead >= MIN_MATCH) {
+            s->ins_h = s->window[s->strstart];
+            UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
+#if MIN_MATCH != 3
+            Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+        }
+        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
+         * but this is not important since only literal bytes will be emitted.
+         */
+
+    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
+}
+
+/* ===========================================================================
+ * Flush the current block, with given end-of-file flag.
+ * IN assertion: strstart is set to the end of the current match.
+ */
+#define FLUSH_BLOCK_ONLY(s, eof) { \
+   _tr_flush_block(s, (s->block_start >= 0L ? \
+                   (charf *)&s->window[(unsigned)s->block_start] : \
+                   (charf *)Z_NULL), \
+		(ulg)((long)s->strstart - s->block_start), \
+		(eof)); \
+   s->block_start = s->strstart; \
+   flush_pending(s->strm); \
+   Tracev((stderr,"[FLUSH]")); \
+}
+
+/* Same but force premature exit if necessary. */
+#define FLUSH_BLOCK(s, eof) { \
+   FLUSH_BLOCK_ONLY(s, eof); \
+   if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \
+}
+
+/* ===========================================================================
+ * Copy without compression as much as possible from the input stream, return
+ * the current block state.
+ * This function does not insert new strings in the dictionary since
+ * uncompressible data is probably not useful. This function is used
+ * only for the level=0 compression option.
+ * NOTE: this function should be optimized to avoid extra copying from
+ * window to pending_buf.
+ */
+local block_state deflate_stored(s, flush)
+    deflate_state *s;
+    int flush;
+{
+    /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
+     * to pending_buf_size, and each stored block has a 5 byte header:
+     */
+    ulg max_block_size = 0xffff;
+    ulg max_start;
+
+    if (max_block_size > s->pending_buf_size - 5) {
+        max_block_size = s->pending_buf_size - 5;
+    }
+
+    /* Copy as much as possible from input to output: */
+    for (;;) {
+        /* Fill the window as much as possible: */
+        if (s->lookahead <= 1) {
+
+            Assert(s->strstart < s->w_size+MAX_DIST(s) ||
+		   s->block_start >= (long)s->w_size, "slide too late");
+
+            fill_window(s);
+            if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
+
+            if (s->lookahead == 0) break; /* flush the current block */
+        }
+	Assert(s->block_start >= 0L, "block gone");
+
+	s->strstart += s->lookahead;
+	s->lookahead = 0;
+
+	/* Emit a stored block if pending_buf will be full: */
+ 	max_start = s->block_start + max_block_size;
+        if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
+	    /* strstart == 0 is possible when wraparound on 16-bit machine */
+	    s->lookahead = (uInt)(s->strstart - max_start);
+	    s->strstart = (uInt)max_start;
+            FLUSH_BLOCK(s, 0);
+	}
+	/* Flush if we may have to slide, otherwise block_start may become
+         * negative and the data will be gone:
+         */
+        if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
+            FLUSH_BLOCK(s, 0);
+	}
+    }
+    FLUSH_BLOCK(s, flush == Z_FINISH);
+    return flush == Z_FINISH ? finish_done : block_done;
+}
+
+/* ===========================================================================
+ * Compress as much as possible from the input stream, return the current
+ * block state.
+ * This function does not perform lazy evaluation of matches and inserts
+ * new strings in the dictionary only for unmatched strings or for short
+ * matches. It is used only for the fast compression options.
+ */
+local block_state deflate_fast(s, flush)
+    deflate_state *s;
+    int flush;
+{
+    IPos hash_head = NIL; /* head of the hash chain */
+    int bflush;           /* set if current block must be flushed */
+
+    for (;;) {
+        /* Make sure that we always have enough lookahead, except
+         * at the end of the input file. We need MAX_MATCH bytes
+         * for the next match, plus MIN_MATCH bytes to insert the
+         * string following the next match.
+         */
+        if (s->lookahead < MIN_LOOKAHEAD) {
+            fill_window(s);
+            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+	        return need_more;
+	    }
+            if (s->lookahead == 0) break; /* flush the current block */
+        }
+
+        /* Insert the string window[strstart .. strstart+2] in the
+         * dictionary, and set hash_head to the head of the hash chain:
+         */
+        if (s->lookahead >= MIN_MATCH) {
+            INSERT_STRING(s, s->strstart, hash_head);
+        }
+
+        /* Find the longest match, discarding those <= prev_length.
+         * At this point we have always match_length < MIN_MATCH
+         */
+        if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
+            /* To simplify the code, we prevent matches with the string
+             * of window index 0 (in particular we have to avoid a match
+             * of the string with itself at the start of the input file).
+             */
+            if (s->strategy != Z_HUFFMAN_ONLY) {
+                s->match_length = longest_match (s, hash_head);
+            }
+            /* longest_match() sets match_start */
+        }
+        if (s->match_length >= MIN_MATCH) {
+            check_match(s, s->strstart, s->match_start, s->match_length);
+
+            _tr_tally_dist(s, s->strstart - s->match_start,
+                           s->match_length - MIN_MATCH, bflush);
+
+            s->lookahead -= s->match_length;
+
+            /* Insert new strings in the hash table only if the match length
+             * is not too large. This saves time but degrades compression.
+             */
+#ifndef FASTEST
+            if (s->match_length <= s->max_insert_length &&
+                s->lookahead >= MIN_MATCH) {
+                s->match_length--; /* string at strstart already in hash table */
+                do {
+                    s->strstart++;
+                    INSERT_STRING(s, s->strstart, hash_head);
+                    /* strstart never exceeds WSIZE-MAX_MATCH, so there are
+                     * always MIN_MATCH bytes ahead.
+                     */
+                } while (--s->match_length != 0);
+                s->strstart++; 
+            } else
+#endif
+	    {
+                s->strstart += s->match_length;
+                s->match_length = 0;
+                s->ins_h = s->window[s->strstart];
+                UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
+#if MIN_MATCH != 3
+                Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+                /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
+                 * matter since it will be recomputed at next deflate call.
+                 */
+            }
+        } else {
+            /* No match, output a literal byte */
+            Tracevv((stderr,"%c", s->window[s->strstart]));
+            _tr_tally_lit (s, s->window[s->strstart], bflush);
+            s->lookahead--;
+            s->strstart++; 
+        }
+        if (bflush) FLUSH_BLOCK(s, 0);
+    }
+    FLUSH_BLOCK(s, flush == Z_FINISH);
+    return flush == Z_FINISH ? finish_done : block_done;
+}
+
+/* ===========================================================================
+ * Same as above, but achieves better compression. We use a lazy
+ * evaluation for matches: a match is finally adopted only if there is
+ * no better match at the next window position.
+ */
+local block_state deflate_slow(s, flush)
+    deflate_state *s;
+    int flush;
+{
+    IPos hash_head = NIL;    /* head of hash chain */
+    int bflush;              /* set if current block must be flushed */
+
+    /* Process the input block. */
+    for (;;) {
+        /* Make sure that we always have enough lookahead, except
+         * at the end of the input file. We need MAX_MATCH bytes
+         * for the next match, plus MIN_MATCH bytes to insert the
+         * string following the next match.
+         */
+        if (s->lookahead < MIN_LOOKAHEAD) {
+            fill_window(s);
+            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+	        return need_more;
+	    }
+            if (s->lookahead == 0) break; /* flush the current block */
+        }
+
+        /* Insert the string window[strstart .. strstart+2] in the
+         * dictionary, and set hash_head to the head of the hash chain:
+         */
+        if (s->lookahead >= MIN_MATCH) {
+            INSERT_STRING(s, s->strstart, hash_head);
+        }
+
+        /* Find the longest match, discarding those <= prev_length.
+         */
+        s->prev_length = s->match_length, s->prev_match = s->match_start;
+        s->match_length = MIN_MATCH-1;
+
+        if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
+            s->strstart - hash_head <= MAX_DIST(s)) {
+            /* To simplify the code, we prevent matches with the string
+             * of window index 0 (in particular we have to avoid a match
+             * of the string with itself at the start of the input file).
+             */
+            if (s->strategy != Z_HUFFMAN_ONLY) {
+                s->match_length = longest_match (s, hash_head);
+            }
+            /* longest_match() sets match_start */
+
+            if (s->match_length <= 5 && (s->strategy == Z_FILTERED ||
+                 (s->match_length == MIN_MATCH &&
+                  s->strstart - s->match_start > TOO_FAR))) {
+
+                /* If prev_match is also MIN_MATCH, match_start is garbage
+                 * but we will ignore the current match anyway.
+                 */
+                s->match_length = MIN_MATCH-1;
+            }
+        }
+        /* If there was a match at the previous step and the current
+         * match is not better, output the previous match:
+         */
+        if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
+            uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
+            /* Do not insert strings in hash table beyond this. */
+
+            check_match(s, s->strstart-1, s->prev_match, s->prev_length);
+
+            _tr_tally_dist(s, s->strstart -1 - s->prev_match,
+			   s->prev_length - MIN_MATCH, bflush);
+
+            /* Insert in hash table all strings up to the end of the match.
+             * strstart-1 and strstart are already inserted. If there is not
+             * enough lookahead, the last two strings are not inserted in
+             * the hash table.
+             */
+            s->lookahead -= s->prev_length-1;
+            s->prev_length -= 2;
+            do {
+                if (++s->strstart <= max_insert) {
+                    INSERT_STRING(s, s->strstart, hash_head);
+                }
+            } while (--s->prev_length != 0);
+            s->match_available = 0;
+            s->match_length = MIN_MATCH-1;
+            s->strstart++;
+
+            if (bflush) FLUSH_BLOCK(s, 0);
+
+        } else if (s->match_available) {
+            /* If there was no match at the previous position, output a
+             * single literal. If there was a match but the current match
+             * is longer, truncate the previous match to a single literal.
+             */
+            Tracevv((stderr,"%c", s->window[s->strstart-1]));
+	    _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+	    if (bflush) {
+                FLUSH_BLOCK_ONLY(s, 0);
+            }
+            s->strstart++;
+            s->lookahead--;
+            if (s->strm->avail_out == 0) return need_more;
+        } else {
+            /* There is no previous match to compare with, wait for
+             * the next step to decide.
+             */
+            s->match_available = 1;
+            s->strstart++;
+            s->lookahead--;
+        }
+    }
+    Assert (flush != Z_NO_FLUSH, "no flush?");
+    if (s->match_available) {
+        Tracevv((stderr,"%c", s->window[s->strstart-1]));
+        _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+        s->match_available = 0;
+    }
+    FLUSH_BLOCK(s, flush == Z_FINISH);
+    return flush == Z_FINISH ? finish_done : block_done;
+}
diff --git a/nx-X11/extras/zlib/deflate.h b/nx-X11/extras/zlib/deflate.h
new file mode 100644
index 000000000..d68f348ea
--- /dev/null
+++ b/nx-X11/extras/zlib/deflate.h
@@ -0,0 +1,316 @@
+/* deflate.h -- internal compression state
+ * Copyright (C) 1995-2002 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+#ifndef _DEFLATE_H
+#define _DEFLATE_H
+
+#include "zutil.h"
+
+/* ===========================================================================
+ * Internal compression state.
+ */
+
+#define LENGTH_CODES 29
+/* number of length codes, not counting the special END_BLOCK code */
+
+#define LITERALS  256
+/* number of literal bytes 0..255 */
+
+#define L_CODES (LITERALS+1+LENGTH_CODES)
+/* number of Literal or Length codes, including the END_BLOCK code */
+
+#define D_CODES   30
+/* number of distance codes */
+
+#define BL_CODES  19
+/* number of codes used to transfer the bit lengths */
+
+#define HEAP_SIZE (2*L_CODES+1)
+/* maximum heap size */
+
+#define MAX_BITS 15
+/* All codes must not exceed MAX_BITS bits */
+
+#define INIT_STATE    42
+#define BUSY_STATE   113
+#define FINISH_STATE 666
+/* Stream status */
+
+
+/* Data structure describing a single value and its code string. */
+typedef struct ct_data_s {
+    union {
+        ush  freq;       /* frequency count */
+        ush  code;       /* bit string */
+    } fc;
+    union {
+        ush  dad;        /* father node in Huffman tree */
+        ush  len;        /* length of bit string */
+    } dl;
+} FAR ct_data;
+
+#define Freq fc.freq
+#define Code fc.code
+#define Dad  dl.dad
+#define Len  dl.len
+
+typedef struct static_tree_desc_s  static_tree_desc;
+
+typedef struct tree_desc_s {
+    ct_data *dyn_tree;           /* the dynamic tree */
+    int     max_code;            /* largest code with non zero frequency */
+    static_tree_desc *stat_desc; /* the corresponding static tree */
+} FAR tree_desc;
+
+typedef ush Pos;
+typedef Pos FAR Posf;
+typedef unsigned IPos;
+
+/* A Pos is an index in the character window. We use short instead of int to
+ * save space in the various tables. IPos is used only for parameter passing.
+ */
+
+typedef struct internal_state {
+    z_streamp strm;      /* pointer back to this zlib stream */
+    int   status;        /* as the name implies */
+    Bytef *pending_buf;  /* output still pending */
+    ulg   pending_buf_size; /* size of pending_buf */
+    Bytef *pending_out;  /* next pending byte to output to the stream */
+    int   pending;       /* nb of bytes in the pending buffer */
+    int   noheader;      /* suppress zlib header and adler32 */
+    Byte  data_type;     /* UNKNOWN, BINARY or ASCII */
+    Byte  method;        /* STORED (for zip only) or DEFLATED */
+    int   last_flush;    /* value of flush param for previous deflate call */
+
+                /* used by deflate.c: */
+
+    uInt  w_size;        /* LZ77 window size (32K by default) */
+    uInt  w_bits;        /* log2(w_size)  (8..16) */
+    uInt  w_mask;        /* w_size - 1 */
+
+    Bytef *window;
+    /* Sliding window. Input bytes are read into the second half of the window,
+     * and move to the first half later to keep a dictionary of at least wSize
+     * bytes. With this organization, matches are limited to a distance of
+     * wSize-MAX_MATCH bytes, but this ensures that IO is always
+     * performed with a length multiple of the block size. Also, it limits
+     * the window size to 64K, which is quite useful on MSDOS.
+     * To do: use the user input buffer as sliding window.
+     */
+
+    ulg window_size;
+    /* Actual size of window: 2*wSize, except when the user input buffer
+     * is directly used as sliding window.
+     */
+
+    Posf *prev;
+    /* Link to older string with same hash index. To limit the size of this
+     * array to 64K, this link is maintained only for the last 32K strings.
+     * An index in this array is thus a window index modulo 32K.
+     */
+
+    Posf *head; /* Heads of the hash chains or NIL. */
+
+    uInt  ins_h;          /* hash index of string to be inserted */
+    uInt  hash_size;      /* number of elements in hash table */
+    uInt  hash_bits;      /* log2(hash_size) */
+    uInt  hash_mask;      /* hash_size-1 */
+
+    uInt  hash_shift;
+    /* Number of bits by which ins_h must be shifted at each input
+     * step. It must be such that after MIN_MATCH steps, the oldest
+     * byte no longer takes part in the hash key, that is:
+     *   hash_shift * MIN_MATCH >= hash_bits
+     */
+
+    long block_start;
+    /* Window position at the beginning of the current output block. Gets
+     * negative when the window is moved backwards.
+     */
+
+    uInt match_length;           /* length of best match */
+    IPos prev_match;             /* previous match */
+    int match_available;         /* set if previous match exists */
+    uInt strstart;               /* start of string to insert */
+    uInt match_start;            /* start of matching string */
+    uInt lookahead;              /* number of valid bytes ahead in window */
+
+    uInt prev_length;
+    /* Length of the best match at previous step. Matches not greater than this
+     * are discarded. This is used in the lazy match evaluation.
+     */
+
+    uInt max_chain_length;
+    /* To speed up deflation, hash chains are never searched beyond this
+     * length.  A higher limit improves compression ratio but degrades the
+     * speed.
+     */
+
+    uInt max_lazy_match;
+    /* Attempt to find a better match only when the current match is strictly
+     * smaller than this value. This mechanism is used only for compression
+     * levels >= 4.
+     */
+#   define max_insert_length  max_lazy_match
+    /* Insert new strings in the hash table only if the match length is not
+     * greater than this length. This saves time but degrades compression.
+     * max_insert_length is used only for compression levels <= 3.
+     */
+
+    int level;    /* compression level (1..9) */
+    int strategy; /* favor or force Huffman coding*/
+
+    uInt good_match;
+    /* Use a faster search when the previous match is longer than this */
+
+    int nice_match; /* Stop searching when current match exceeds this */
+
+                /* used by trees.c: */
+    /* Didn't use ct_data typedef below to supress compiler warning */
+    struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
+    struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
+    struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
+
+    struct tree_desc_s l_desc;               /* desc. for literal tree */
+    struct tree_desc_s d_desc;               /* desc. for distance tree */
+    struct tree_desc_s bl_desc;              /* desc. for bit length tree */
+
+    ush bl_count[MAX_BITS+1];
+    /* number of codes at each bit length for an optimal tree */
+
+    int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
+    int heap_len;               /* number of elements in the heap */
+    int heap_max;               /* element of largest frequency */
+    /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
+     * The same heap array is used to build all trees.
+     */
+
+    uch depth[2*L_CODES+1];
+    /* Depth of each subtree used as tie breaker for trees of equal frequency
+     */
+
+    uchf *l_buf;          /* buffer for literals or lengths */
+
+    uInt  lit_bufsize;
+    /* Size of match buffer for literals/lengths.  There are 4 reasons for
+     * limiting lit_bufsize to 64K:
+     *   - frequencies can be kept in 16 bit counters
+     *   - if compression is not successful for the first block, all input
+     *     data is still in the window so we can still emit a stored block even
+     *     when input comes from standard input.  (This can also be done for
+     *     all blocks if lit_bufsize is not greater than 32K.)
+     *   - if compression is not successful for a file smaller than 64K, we can
+     *     even emit a stored file instead of a stored block (saving 5 bytes).
+     *     This is applicable only for zip (not gzip or zlib).
+     *   - creating new Huffman trees less frequently may not provide fast
+     *     adaptation to changes in the input data statistics. (Take for
+     *     example a binary file with poorly compressible code followed by
+     *     a highly compressible string table.) Smaller buffer sizes give
+     *     fast adaptation but have of course the overhead of transmitting
+     *     trees more frequently.
+     *   - I can't count above 4
+     */
+
+    uInt last_lit;      /* running index in l_buf */
+
+    ushf *d_buf;
+    /* Buffer for distances. To simplify the code, d_buf and l_buf have
+     * the same number of elements. To use different lengths, an extra flag
+     * array would be necessary.
+     */
+
+    ulg opt_len;        /* bit length of current block with optimal trees */
+    ulg static_len;     /* bit length of current block with static trees */
+    uInt matches;       /* number of string matches in current block */
+    int last_eob_len;   /* bit length of EOB code for last block */
+
+#ifdef DEBUG
+    ulg compressed_len; /* total bit length of compressed file mod 2^32 */
+    ulg bits_sent;      /* bit length of compressed data sent mod 2^32 */
+#endif
+
+    ush bi_buf;
+    /* Output buffer. bits are inserted starting at the bottom (least
+     * significant bits).
+     */
+    int bi_valid;
+    /* Number of valid bits in bi_buf.  All bits above the last valid bit
+     * are always zero.
+     */
+
+} FAR deflate_state;
+
+/* Output a byte on the stream.
+ * IN assertion: there is enough room in pending_buf.
+ */
+#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
+
+
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+/* Minimum amount of lookahead, except at the end of the input file.
+ * See deflate.c for comments about the MIN_MATCH+1.
+ */
+
+#define MAX_DIST(s)  ((s)->w_size-MIN_LOOKAHEAD)
+/* In order to simplify the code, particularly on 16 bit machines, match
+ * distances are limited to MAX_DIST instead of WSIZE.
+ */
+
+        /* in trees.c */
+void _tr_init         OF((deflate_state *s));
+int  _tr_tally        OF((deflate_state *s, unsigned dist, unsigned lc));
+void _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
+			  int eof));
+void _tr_align        OF((deflate_state *s));
+void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
+                          int eof));
+
+#define d_code(dist) \
+   ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
+/* Mapping from a distance to a distance code. dist is the distance - 1 and
+ * must not have side effects. _dist_code[256] and _dist_code[257] are never
+ * used.
+ */
+
+#ifndef DEBUG
+/* Inline versions of _tr_tally for speed: */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+  extern uch _length_code[];
+  extern uch _dist_code[];
+#else
+  extern const uch _length_code[];
+  extern const uch _dist_code[];
+#endif
+
+# define _tr_tally_lit(s, c, flush) \
+  { uch cc = (c); \
+    s->d_buf[s->last_lit] = 0; \
+    s->l_buf[s->last_lit++] = cc; \
+    s->dyn_ltree[cc].Freq++; \
+    flush = (s->last_lit == s->lit_bufsize-1); \
+   }
+# define _tr_tally_dist(s, distance, length, flush) \
+  { uch len = (length); \
+    ush dist = (distance); \
+    s->d_buf[s->last_lit] = dist; \
+    s->l_buf[s->last_lit++] = len; \
+    dist--; \
+    s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
+    s->dyn_dtree[d_code(dist)].Freq++; \
+    flush = (s->last_lit == s->lit_bufsize-1); \
+  }
+#else
+# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
+# define _tr_tally_dist(s, distance, length, flush) \
+              flush = _tr_tally(s, distance, length) 
+#endif
+
+#endif
diff --git a/nx-X11/extras/zlib/descrip.mms b/nx-X11/extras/zlib/descrip.mms
new file mode 100644
index 000000000..9d364598a
--- /dev/null
+++ b/nx-X11/extras/zlib/descrip.mms
@@ -0,0 +1,48 @@
+# descrip.mms: MMS description file for building zlib on VMS
+# written by Martin P.J. Zinser <m.zinser@gsi.de>
+
+cc_defs = 
+c_deb = 
+
+.ifdef __DECC__
+pref = /prefix=all
+.endif
+
+OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj,\
+       deflate.obj, trees.obj, zutil.obj, inflate.obj, infblock.obj,\
+       inftrees.obj, infcodes.obj, infutil.obj, inffast.obj
+
+CFLAGS= $(C_DEB) $(CC_DEFS) $(PREF)
+
+all : example.exe minigzip.exe
+        @ write sys$output " Example applications available"
+libz.olb : libz.olb($(OBJS))
+	@ write sys$output " libz available"
+
+example.exe : example.obj libz.olb
+              link example,libz.olb/lib
+
+minigzip.exe : minigzip.obj libz.olb
+              link minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
+
+clean : 
+	delete *.obj;*,libz.olb;*
+
+
+# Other dependencies.
+adler32.obj : zutil.h zlib.h zconf.h
+compress.obj : zlib.h zconf.h
+crc32.obj : zutil.h zlib.h zconf.h
+deflate.obj : deflate.h zutil.h zlib.h zconf.h
+example.obj : zlib.h zconf.h
+gzio.obj : zutil.h zlib.h zconf.h
+infblock.obj : zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+infcodes.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
+inffast.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+inflate.obj : zutil.h zlib.h zconf.h infblock.h
+inftrees.obj : zutil.h zlib.h zconf.h inftrees.h
+infutil.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h
+minigzip.obj : zlib.h zconf.h
+trees.obj : deflate.h zutil.h zlib.h zconf.h
+uncompr.obj : zlib.h zconf.h
+zutil.obj : zutil.h zlib.h zconf.h
diff --git a/nx-X11/extras/zlib/example.c b/nx-X11/extras/zlib/example.c
new file mode 100644
index 000000000..cffd11c0a
--- /dev/null
+++ b/nx-X11/extras/zlib/example.c
@@ -0,0 +1,556 @@
+/* example.c -- usage example of the zlib compression library
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* @(#) $Id: example.c,v 1.1.1.3 2004/03/14 08:29:15 eich Exp $ */
+
+#include <stdio.h>
+#include "zlib.h"
+
+#ifdef STDC
+#  include <string.h>
+#  include <stdlib.h>
+#else
+   extern void exit  OF((int));
+#endif
+
+#if defined(VMS) || defined(RISCOS)
+#  define TESTFILE "foo-gz"
+#else
+#  define TESTFILE "foo.gz"
+#endif
+
+#define CHECK_ERR(err, msg) { \
+    if (err != Z_OK) { \
+        fprintf(stderr, "%s error: %d\n", msg, err); \
+        exit(1); \
+    } \
+}
+
+const char hello[] = "hello, hello!";
+/* "hello world" would be more standard, but the repeated "hello"
+ * stresses the compression code better, sorry...
+ */
+
+const char dictionary[] = "hello";
+uLong dictId; /* Adler32 value of the dictionary */
+
+void test_compress      OF((Byte *compr, uLong comprLen,
+		            Byte *uncompr, uLong uncomprLen));
+void test_gzio          OF((const char *out, const char *in, 
+		            Byte *uncompr, int uncomprLen));
+void test_deflate       OF((Byte *compr, uLong comprLen));
+void test_inflate       OF((Byte *compr, uLong comprLen,
+		            Byte *uncompr, uLong uncomprLen));
+void test_large_deflate OF((Byte *compr, uLong comprLen,
+		            Byte *uncompr, uLong uncomprLen));
+void test_large_inflate OF((Byte *compr, uLong comprLen,
+		            Byte *uncompr, uLong uncomprLen));
+void test_flush         OF((Byte *compr, uLong *comprLen));
+void test_sync          OF((Byte *compr, uLong comprLen,
+		            Byte *uncompr, uLong uncomprLen));
+void test_dict_deflate  OF((Byte *compr, uLong comprLen));
+void test_dict_inflate  OF((Byte *compr, uLong comprLen,
+		            Byte *uncompr, uLong uncomprLen));
+int  main               OF((int argc, char *argv[]));
+
+/* ===========================================================================
+ * Test compress() and uncompress()
+ */
+void test_compress(compr, comprLen, uncompr, uncomprLen)
+    Byte *compr, *uncompr;
+    uLong comprLen, uncomprLen;
+{
+    int err;
+    uLong len = strlen(hello)+1;
+
+    err = compress(compr, &comprLen, (const Bytef*)hello, len);
+    CHECK_ERR(err, "compress");
+
+    strcpy((char*)uncompr, "garbage");
+
+    err = uncompress(uncompr, &uncomprLen, compr, comprLen);
+    CHECK_ERR(err, "uncompress");
+
+    if (strcmp((char*)uncompr, hello)) {
+        fprintf(stderr, "bad uncompress\n");
+	exit(1);
+    } else {
+        printf("uncompress(): %s\n", (char *)uncompr);
+    }
+}
+
+/* ===========================================================================
+ * Test read/write of .gz files
+ */
+void test_gzio(out, in, uncompr, uncomprLen)
+    const char *out; /* compressed output file */
+    const char *in;  /* compressed input file */
+    Byte *uncompr;
+    int  uncomprLen;
+{
+    int err;
+    int len = strlen(hello)+1;
+    gzFile file;
+    z_off_t pos;
+
+    file = gzopen(out, "wb");
+    if (file == NULL) {
+        fprintf(stderr, "gzopen error\n");
+        exit(1);
+    }
+    gzputc(file, 'h');
+    if (gzputs(file, "ello") != 4) {
+        fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
+	exit(1);
+    }
+    if (gzprintf(file, ", %s!", "hello") != 8) {
+        fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
+	exit(1);
+    }
+    gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
+    gzclose(file);
+
+    file = gzopen(in, "rb");
+    if (file == NULL) {
+        fprintf(stderr, "gzopen error\n");
+    }
+    strcpy((char*)uncompr, "garbage");
+
+    uncomprLen = gzread(file, uncompr, (unsigned)uncomprLen);
+    if (uncomprLen != len) {
+        fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
+	exit(1);
+    }
+    if (strcmp((char*)uncompr, hello)) {
+        fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
+	exit(1);
+    } else {
+        printf("gzread(): %s\n", (char *)uncompr);
+    }
+
+    pos = gzseek(file, -8L, SEEK_CUR);
+    if (pos != 6 || gztell(file) != pos) {
+	fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
+		(long)pos, (long)gztell(file));
+	exit(1);
+    }
+
+    if (gzgetc(file) != ' ') {
+	fprintf(stderr, "gzgetc error\n");
+	exit(1);
+    }
+
+    gzgets(file, (char*)uncompr, uncomprLen);
+    uncomprLen = strlen((char*)uncompr);
+    if (uncomprLen != 6) { /* "hello!" */
+        fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
+	exit(1);
+    }
+    if (strcmp((char*)uncompr, hello+7)) {
+        fprintf(stderr, "bad gzgets after gzseek\n");
+	exit(1);
+    } else {
+        printf("gzgets() after gzseek: %s\n", (char *)uncompr);
+    }
+
+    gzclose(file);
+}
+
+/* ===========================================================================
+ * Test deflate() with small buffers
+ */
+void test_deflate(compr, comprLen)
+    Byte *compr;
+    uLong comprLen;
+{
+    z_stream c_stream; /* compression stream */
+    int err;
+    int len = strlen(hello)+1;
+
+    c_stream.zalloc = (alloc_func)0;
+    c_stream.zfree = (free_func)0;
+    c_stream.opaque = (voidpf)0;
+
+    err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
+    CHECK_ERR(err, "deflateInit");
+
+    c_stream.next_in  = (Bytef*)hello;
+    c_stream.next_out = compr;
+
+    while (c_stream.total_in != (uLong)len && c_stream.total_out < comprLen) {
+        c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */
+        err = deflate(&c_stream, Z_NO_FLUSH);
+        CHECK_ERR(err, "deflate");
+    }
+    /* Finish the stream, still forcing small buffers: */
+    for (;;) {
+        c_stream.avail_out = 1;
+        err = deflate(&c_stream, Z_FINISH);
+        if (err == Z_STREAM_END) break;
+        CHECK_ERR(err, "deflate");
+    }
+
+    err = deflateEnd(&c_stream);
+    CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with small buffers
+ */
+void test_inflate(compr, comprLen, uncompr, uncomprLen)
+    Byte *compr, *uncompr;
+    uLong comprLen, uncomprLen;
+{
+    int err;
+    z_stream d_stream; /* decompression stream */
+
+    strcpy((char*)uncompr, "garbage");
+
+    d_stream.zalloc = (alloc_func)0;
+    d_stream.zfree = (free_func)0;
+    d_stream.opaque = (voidpf)0;
+
+    d_stream.next_in  = compr;
+    d_stream.avail_in = 0;
+    d_stream.next_out = uncompr;
+
+    err = inflateInit(&d_stream);
+    CHECK_ERR(err, "inflateInit");
+
+    while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
+        d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
+        err = inflate(&d_stream, Z_NO_FLUSH);
+        if (err == Z_STREAM_END) break;
+        CHECK_ERR(err, "inflate");
+    }
+
+    err = inflateEnd(&d_stream);
+    CHECK_ERR(err, "inflateEnd");
+
+    if (strcmp((char*)uncompr, hello)) {
+        fprintf(stderr, "bad inflate\n");
+	exit(1);
+    } else {
+        printf("inflate(): %s\n", (char *)uncompr);
+    }
+}
+
+/* ===========================================================================
+ * Test deflate() with large buffers and dynamic change of compression level
+ */
+void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
+    Byte *compr, *uncompr;
+    uLong comprLen, uncomprLen;
+{
+    z_stream c_stream; /* compression stream */
+    int err;
+
+    c_stream.zalloc = (alloc_func)0;
+    c_stream.zfree = (free_func)0;
+    c_stream.opaque = (voidpf)0;
+
+    err = deflateInit(&c_stream, Z_BEST_SPEED);
+    CHECK_ERR(err, "deflateInit");
+
+    c_stream.next_out = compr;
+    c_stream.avail_out = (uInt)comprLen;
+
+    /* At this point, uncompr is still mostly zeroes, so it should compress
+     * very well:
+     */
+    c_stream.next_in = uncompr;
+    c_stream.avail_in = (uInt)uncomprLen;
+    err = deflate(&c_stream, Z_NO_FLUSH);
+    CHECK_ERR(err, "deflate");
+    if (c_stream.avail_in != 0) {
+        fprintf(stderr, "deflate not greedy\n");
+	exit(1);
+    }
+
+    /* Feed in already compressed data and switch to no compression: */
+    deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
+    c_stream.next_in = compr;
+    c_stream.avail_in = (uInt)comprLen/2;
+    err = deflate(&c_stream, Z_NO_FLUSH);
+    CHECK_ERR(err, "deflate");
+
+    /* Switch back to compressing mode: */
+    deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
+    c_stream.next_in = uncompr;
+    c_stream.avail_in = (uInt)uncomprLen;
+    err = deflate(&c_stream, Z_NO_FLUSH);
+    CHECK_ERR(err, "deflate");
+
+    err = deflate(&c_stream, Z_FINISH);
+    if (err != Z_STREAM_END) {
+        fprintf(stderr, "deflate should report Z_STREAM_END\n");
+	exit(1);
+    }
+    err = deflateEnd(&c_stream);
+    CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with large buffers
+ */
+void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
+    Byte *compr, *uncompr;
+    uLong comprLen, uncomprLen;
+{
+    int err;
+    z_stream d_stream; /* decompression stream */
+
+    strcpy((char*)uncompr, "garbage");
+
+    d_stream.zalloc = (alloc_func)0;
+    d_stream.zfree = (free_func)0;
+    d_stream.opaque = (voidpf)0;
+
+    d_stream.next_in  = compr;
+    d_stream.avail_in = (uInt)comprLen;
+
+    err = inflateInit(&d_stream);
+    CHECK_ERR(err, "inflateInit");
+
+    for (;;) {
+        d_stream.next_out = uncompr;            /* discard the output */
+	d_stream.avail_out = (uInt)uncomprLen;
+        err = inflate(&d_stream, Z_NO_FLUSH);
+        if (err == Z_STREAM_END) break;
+        CHECK_ERR(err, "large inflate");
+    }
+
+    err = inflateEnd(&d_stream);
+    CHECK_ERR(err, "inflateEnd");
+
+    if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
+        fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
+	exit(1);
+    } else {
+        printf("large_inflate(): OK\n");
+    }
+}
+
+/* ===========================================================================
+ * Test deflate() with full flush
+ */
+void test_flush(compr, comprLen)
+    Byte *compr;
+    uLong *comprLen;
+{
+    z_stream c_stream; /* compression stream */
+    int err;
+    int len = strlen(hello)+1;
+
+    c_stream.zalloc = (alloc_func)0;
+    c_stream.zfree = (free_func)0;
+    c_stream.opaque = (voidpf)0;
+
+    err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
+    CHECK_ERR(err, "deflateInit");
+
+    c_stream.next_in  = (Bytef*)hello;
+    c_stream.next_out = compr;
+    c_stream.avail_in = 3;
+    c_stream.avail_out = (uInt)*comprLen;
+    err = deflate(&c_stream, Z_FULL_FLUSH);
+    CHECK_ERR(err, "deflate");
+
+    compr[3]++; /* force an error in first compressed block */
+    c_stream.avail_in = len - 3;
+
+    err = deflate(&c_stream, Z_FINISH);
+    if (err != Z_STREAM_END) {
+        CHECK_ERR(err, "deflate");
+    }
+    err = deflateEnd(&c_stream);
+    CHECK_ERR(err, "deflateEnd");
+
+    *comprLen = c_stream.total_out;
+}
+
+/* ===========================================================================
+ * Test inflateSync()
+ */
+void test_sync(compr, comprLen, uncompr, uncomprLen)
+    Byte *compr, *uncompr;
+    uLong comprLen, uncomprLen;
+{
+    int err;
+    z_stream d_stream; /* decompression stream */
+
+    strcpy((char*)uncompr, "garbage");
+
+    d_stream.zalloc = (alloc_func)0;
+    d_stream.zfree = (free_func)0;
+    d_stream.opaque = (voidpf)0;
+
+    d_stream.next_in  = compr;
+    d_stream.avail_in = 2; /* just read the zlib header */
+
+    err = inflateInit(&d_stream);
+    CHECK_ERR(err, "inflateInit");
+
+    d_stream.next_out = uncompr;
+    d_stream.avail_out = (uInt)uncomprLen;
+
+    inflate(&d_stream, Z_NO_FLUSH);
+    CHECK_ERR(err, "inflate");
+
+    d_stream.avail_in = (uInt)comprLen-2;   /* read all compressed data */
+    err = inflateSync(&d_stream);           /* but skip the damaged part */
+    CHECK_ERR(err, "inflateSync");
+
+    err = inflate(&d_stream, Z_FINISH);
+    if (err != Z_DATA_ERROR) {
+        fprintf(stderr, "inflate should report DATA_ERROR\n");
+        /* Because of incorrect adler32 */
+	exit(1);
+    }
+    err = inflateEnd(&d_stream);
+    CHECK_ERR(err, "inflateEnd");
+
+    printf("after inflateSync(): hel%s\n", (char *)uncompr);
+}
+
+/* ===========================================================================
+ * Test deflate() with preset dictionary
+ */
+void test_dict_deflate(compr, comprLen)
+    Byte *compr;
+    uLong comprLen;
+{
+    z_stream c_stream; /* compression stream */
+    int err;
+
+    c_stream.zalloc = (alloc_func)0;
+    c_stream.zfree = (free_func)0;
+    c_stream.opaque = (voidpf)0;
+
+    err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
+    CHECK_ERR(err, "deflateInit");
+
+    err = deflateSetDictionary(&c_stream,
+			       (const Bytef*)dictionary, sizeof(dictionary));
+    CHECK_ERR(err, "deflateSetDictionary");
+
+    dictId = c_stream.adler;
+    c_stream.next_out = compr;
+    c_stream.avail_out = (uInt)comprLen;
+
+    c_stream.next_in = (Bytef*)hello;
+    c_stream.avail_in = (uInt)strlen(hello)+1;
+
+    err = deflate(&c_stream, Z_FINISH);
+    if (err != Z_STREAM_END) {
+        fprintf(stderr, "deflate should report Z_STREAM_END\n");
+	exit(1);
+    }
+    err = deflateEnd(&c_stream);
+    CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with a preset dictionary
+ */
+void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
+    Byte *compr, *uncompr;
+    uLong comprLen, uncomprLen;
+{
+    int err;
+    z_stream d_stream; /* decompression stream */
+
+    strcpy((char*)uncompr, "garbage");
+
+    d_stream.zalloc = (alloc_func)0;
+    d_stream.zfree = (free_func)0;
+    d_stream.opaque = (voidpf)0;
+
+    d_stream.next_in  = compr;
+    d_stream.avail_in = (uInt)comprLen;
+
+    err = inflateInit(&d_stream);
+    CHECK_ERR(err, "inflateInit");
+
+    d_stream.next_out = uncompr;
+    d_stream.avail_out = (uInt)uncomprLen;
+
+    for (;;) {
+        err = inflate(&d_stream, Z_NO_FLUSH);
+        if (err == Z_STREAM_END) break;
+	if (err == Z_NEED_DICT) {
+	    if (d_stream.adler != dictId) {
+		fprintf(stderr, "unexpected dictionary");
+		exit(1);
+	    }
+	    err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
+				       sizeof(dictionary));
+	}
+        CHECK_ERR(err, "inflate with dict");
+    }
+
+    err = inflateEnd(&d_stream);
+    CHECK_ERR(err, "inflateEnd");
+
+    if (strcmp((char*)uncompr, hello)) {
+        fprintf(stderr, "bad inflate with dict\n");
+	exit(1);
+    } else {
+        printf("inflate with dictionary: %s\n", (char *)uncompr);
+    }
+}
+
+/* ===========================================================================
+ * Usage:  example [output.gz  [input.gz]]
+ */
+
+int main(argc, argv)
+    int argc;
+    char *argv[];
+{
+    Byte *compr, *uncompr;
+    uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
+    uLong uncomprLen = comprLen;
+    static const char* myVersion = ZLIB_VERSION;
+
+    if (zlibVersion()[0] != myVersion[0]) {
+        fprintf(stderr, "incompatible zlib version\n");
+        exit(1);
+
+    } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
+        fprintf(stderr, "warning: different zlib version\n");
+    }
+
+    compr    = (Byte*)calloc((uInt)comprLen, 1);
+    uncompr  = (Byte*)calloc((uInt)uncomprLen, 1);
+    /* compr and uncompr are cleared to avoid reading uninitialized
+     * data and to ensure that uncompr compresses well.
+     */
+    if (compr == Z_NULL || uncompr == Z_NULL) {
+        printf("out of memory\n");
+	exit(1);
+    }
+    test_compress(compr, comprLen, uncompr, uncomprLen);
+
+    test_gzio((argc > 1 ? argv[1] : TESTFILE),
+              (argc > 2 ? argv[2] : TESTFILE),
+	      uncompr, (int)uncomprLen);
+
+    test_deflate(compr, comprLen);
+    test_inflate(compr, comprLen, uncompr, uncomprLen);
+
+    test_large_deflate(compr, comprLen, uncompr, uncomprLen);
+    test_large_inflate(compr, comprLen, uncompr, uncomprLen);
+
+    test_flush(compr, &comprLen);
+    test_sync(compr, comprLen, uncompr, uncomprLen);
+    comprLen = uncomprLen;
+
+    test_dict_deflate(compr, comprLen);
+    test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
+
+    exit(0);
+    return 0; /* to avoid warning */
+}
diff --git a/nx-X11/extras/zlib/gzio.c b/nx-X11/extras/zlib/gzio.c
new file mode 100644
index 000000000..27548611a
--- /dev/null
+++ b/nx-X11/extras/zlib/gzio.c
@@ -0,0 +1,872 @@
+/* gzio.c -- IO on .gz files
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Compile this file with -DNO_DEFLATE to avoid the compression code.
+ */
+/* $XFree86$ */
+
+#include <stdio.h>
+
+#include "zutil.h"
+
+struct internal_state {int dummy;}; /* for buggy compilers */
+
+#ifndef Z_BUFSIZE
+#  ifdef MAXSEG_64K
+#    define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */
+#  else
+#    define Z_BUFSIZE 16384
+#  endif
+#endif
+#ifndef Z_PRINTF_BUFSIZE
+#  define Z_PRINTF_BUFSIZE 4096
+#endif
+
+#define ALLOC(size) malloc(size)
+#define TRYFREE(p) {if (p) free(p);}
+
+static int gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */
+
+/* gzip flag byte */
+#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
+#define HEAD_CRC     0x02 /* bit 1 set: header CRC present */
+#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
+#define COMMENT      0x10 /* bit 4 set: file comment present */
+#define RESERVED     0xE0 /* bits 5..7: reserved */
+
+typedef struct gz_stream {
+    z_stream stream;
+    int      z_err;   /* error code for last stream operation */
+    int      z_eof;   /* set if end of input file */
+    FILE     *file;   /* .gz file */
+    Byte     *inbuf;  /* input buffer */
+    Byte     *outbuf; /* output buffer */
+    uLong    crc;     /* crc32 of uncompressed data */
+    char     *msg;    /* error message */
+    char     *path;   /* path name for debugging only */
+    int      transparent; /* 1 if input file is not a .gz file */
+    char     mode;    /* 'w' or 'r' */
+    long     startpos; /* start of compressed data in file (header skipped) */
+} gz_stream;
+
+
+local gzFile gz_open      OF((const char *path, const char *mode, int  fd));
+local int do_flush        OF((gzFile file, int flush));
+local int    get_byte     OF((gz_stream *s));
+local void   check_header OF((gz_stream *s));
+local int    destroy      OF((gz_stream *s));
+local void   putLong      OF((FILE *file, uLong x));
+local uLong  getLong      OF((gz_stream *s));
+
+/* ===========================================================================
+     Opens a gzip (.gz) file for reading or writing. The mode parameter
+   is as in fopen ("rb" or "wb"). The file is given either by file descriptor
+   or path name (if fd == -1).
+     gz_open return NULL if the file could not be opened or if there was
+   insufficient memory to allocate the (de)compression state; errno
+   can be checked to distinguish the two cases (if errno is zero, the
+   zlib error is Z_MEM_ERROR).
+*/
+local gzFile gz_open (path, mode, fd)
+    const char *path;
+    const char *mode;
+    int  fd;
+{
+    int err;
+    int level = Z_DEFAULT_COMPRESSION; /* compression level */
+    int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */
+    char *p = (char*)mode;
+    gz_stream *s;
+    char fmode[80]; /* copy of mode, without the compression level */
+    char *m = fmode;
+
+    if (!path || !mode) return Z_NULL;
+
+    s = (gz_stream *)ALLOC(sizeof(gz_stream));
+    if (!s) return Z_NULL;
+
+    s->stream.zalloc = (alloc_func)0;
+    s->stream.zfree = (free_func)0;
+    s->stream.opaque = (voidpf)0;
+    s->stream.next_in = s->inbuf = Z_NULL;
+    s->stream.next_out = s->outbuf = Z_NULL;
+    s->stream.avail_in = s->stream.avail_out = 0;
+    s->file = NULL;
+    s->z_err = Z_OK;
+    s->z_eof = 0;
+    s->crc = crc32(0L, Z_NULL, 0);
+    s->msg = NULL;
+    s->transparent = 0;
+
+    s->path = (char*)ALLOC(strlen(path)+1);
+    if (s->path == NULL) {
+        return destroy(s), (gzFile)Z_NULL;
+    }
+    strcpy(s->path, path); /* do this early for debugging */
+
+    s->mode = '\0';
+    do {
+        if (*p == 'r') s->mode = 'r';
+        if (*p == 'w' || *p == 'a') s->mode = 'w';
+        if (*p >= '0' && *p <= '9') {
+	    level = *p - '0';
+	} else if (*p == 'f') {
+	  strategy = Z_FILTERED;
+	} else if (*p == 'h') {
+	  strategy = Z_HUFFMAN_ONLY;
+	} else {
+	    *m++ = *p; /* copy the mode */
+	}
+    } while (*p++ && m != fmode + sizeof(fmode));
+    if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL;
+    
+    if (s->mode == 'w') {
+#ifdef NO_DEFLATE
+        err = Z_STREAM_ERROR;
+#else
+        err = deflateInit2(&(s->stream), level,
+                           Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy);
+        /* windowBits is passed < 0 to suppress zlib header */
+
+        s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
+#endif
+        if (err != Z_OK || s->outbuf == Z_NULL) {
+            return destroy(s), (gzFile)Z_NULL;
+        }
+    } else {
+        s->stream.next_in  = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);
+
+        err = inflateInit2(&(s->stream), -MAX_WBITS);
+        /* windowBits is passed < 0 to tell that there is no zlib header.
+         * Note that in this case inflate *requires* an extra "dummy" byte
+         * after the compressed stream in order to complete decompression and
+         * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are
+         * present after the compressed stream.
+         */
+        if (err != Z_OK || s->inbuf == Z_NULL) {
+            return destroy(s), (gzFile)Z_NULL;
+        }
+    }
+    s->stream.avail_out = Z_BUFSIZE;
+
+    errno = 0;
+    s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode);
+
+    if (s->file == NULL) {
+        return destroy(s), (gzFile)Z_NULL;
+    }
+    if (s->mode == 'w') {
+        /* Write a very simple .gz header:
+         */
+        fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],
+             Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);
+	s->startpos = 10L;
+	/* We use 10L instead of ftell(s->file) to because ftell causes an
+         * fflush on some systems. This version of the library doesn't use
+         * startpos anyway in write mode, so this initialization is not
+         * necessary.
+         */
+    } else {
+	check_header(s); /* skip the .gz header */
+	s->startpos = (ftell(s->file) - s->stream.avail_in);
+    }
+    
+    return (gzFile)s;
+}
+
+/* ===========================================================================
+     Opens a gzip (.gz) file for reading or writing.
+*/
+gzFile ZEXPORT gzopen (path, mode)
+    const char *path;
+    const char *mode;
+{
+    return gz_open (path, mode, -1);
+}
+
+/* ===========================================================================
+     Associate a gzFile with the file descriptor fd. fd is not dup'ed here
+   to mimic the behavio(u)r of fdopen.
+*/
+gzFile ZEXPORT gzdopen (fd, mode)
+    int fd;
+    const char *mode;
+{
+    char name[20];
+
+    if (fd < 0) return (gzFile)Z_NULL;
+    sprintf(name, "<fd:%d>", fd); /* for debugging */
+
+    return gz_open (name, mode, fd);
+}
+
+/* ===========================================================================
+ * Update the compression level and strategy
+ */
+int ZEXPORT gzsetparams (file, level, strategy)
+    gzFile file;
+    int level;
+    int strategy;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+    /* Make room to allow flushing */
+    if (s->stream.avail_out == 0) {
+
+	s->stream.next_out = s->outbuf;
+	if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
+	    s->z_err = Z_ERRNO;
+	}
+	s->stream.avail_out = Z_BUFSIZE;
+    }
+
+    return deflateParams (&(s->stream), level, strategy);
+}
+
+/* ===========================================================================
+     Read a byte from a gz_stream; update next_in and avail_in. Return EOF
+   for end of file.
+   IN assertion: the stream s has been sucessfully opened for reading.
+*/
+local int get_byte(s)
+    gz_stream *s;
+{
+    if (s->z_eof) return EOF;
+    if (s->stream.avail_in == 0) {
+	errno = 0;
+	s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file);
+	if (s->stream.avail_in == 0) {
+	    s->z_eof = 1;
+	    if (ferror(s->file)) s->z_err = Z_ERRNO;
+	    return EOF;
+	}
+	s->stream.next_in = s->inbuf;
+    }
+    s->stream.avail_in--;
+    return *(s->stream.next_in)++;
+}
+
+/* ===========================================================================
+      Check the gzip header of a gz_stream opened for reading. Set the stream
+    mode to transparent if the gzip magic header is not present; set s->err
+    to Z_DATA_ERROR if the magic header is present but the rest of the header
+    is incorrect.
+    IN assertion: the stream s has already been created sucessfully;
+       s->stream.avail_in is zero for the first time, but may be non-zero
+       for concatenated .gz files.
+*/
+local void check_header(s)
+    gz_stream *s;
+{
+    int method; /* method byte */
+    int flags;  /* flags byte */
+    uInt len;
+    int c;
+
+    /* Check the gzip magic header */
+    for (len = 0; len < 2; len++) {
+	c = get_byte(s);
+	if (c != gz_magic[len]) {
+	    if (len != 0) s->stream.avail_in++, s->stream.next_in--;
+	    if (c != EOF) {
+		s->stream.avail_in++, s->stream.next_in--;
+		s->transparent = 1;
+	    }
+	    s->z_err = s->stream.avail_in != 0 ? Z_OK : Z_STREAM_END;
+	    return;
+	}
+    }
+    method = get_byte(s);
+    flags = get_byte(s);
+    if (method != Z_DEFLATED || (flags & RESERVED) != 0) {
+	s->z_err = Z_DATA_ERROR;
+	return;
+    }
+
+    /* Discard time, xflags and OS code: */
+    for (len = 0; len < 6; len++) (void)get_byte(s);
+
+    if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */
+	len  =  (uInt)get_byte(s);
+	len += ((uInt)get_byte(s))<<8;
+	/* len is garbage if EOF but the loop below will quit anyway */
+	while (len-- != 0 && get_byte(s) != EOF) ;
+    }
+    if ((flags & ORIG_NAME) != 0) { /* skip the original file name */
+	while ((c = get_byte(s)) != 0 && c != EOF) ;
+    }
+    if ((flags & COMMENT) != 0) {   /* skip the .gz file comment */
+	while ((c = get_byte(s)) != 0 && c != EOF) ;
+    }
+    if ((flags & HEAD_CRC) != 0) {  /* skip the header crc */
+	for (len = 0; len < 2; len++) (void)get_byte(s);
+    }
+    s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK;
+}
+
+ /* ===========================================================================
+ * Cleanup then free the given gz_stream. Return a zlib error code.
+   Try freeing in the reverse order of allocations.
+ */
+local int destroy (s)
+    gz_stream *s;
+{
+    int err = Z_OK;
+
+    if (!s) return Z_STREAM_ERROR;
+
+    TRYFREE(s->msg);
+
+    if (s->stream.state != NULL) {
+	if (s->mode == 'w') {
+#ifdef NO_DEFLATE
+	    err = Z_STREAM_ERROR;
+#else
+	    err = deflateEnd(&(s->stream));
+#endif
+	} else if (s->mode == 'r') {
+	    err = inflateEnd(&(s->stream));
+	}
+    }
+    if (s->file != NULL && fclose(s->file)) {
+#ifdef ESPIPE
+	if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */
+#endif
+	    err = Z_ERRNO;
+    }
+    if (s->z_err < 0) err = s->z_err;
+
+    TRYFREE(s->inbuf);
+    TRYFREE(s->outbuf);
+    TRYFREE(s->path);
+    TRYFREE(s);
+    return err;
+}
+
+/* ===========================================================================
+     Reads the given number of uncompressed bytes from the compressed file.
+   gzread returns the number of bytes actually read (0 for end of file).
+*/
+int ZEXPORT gzread (file, buf, len)
+    gzFile file;
+    voidp buf;
+    unsigned len;
+{
+    gz_stream *s = (gz_stream*)file;
+    Bytef *start = (Bytef*)buf; /* starting point for crc computation */
+    Byte  *next_out; /* == stream.next_out but not forced far (for MSDOS) */
+
+    if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR;
+
+    if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1;
+    if (s->z_err == Z_STREAM_END) return 0;  /* EOF */
+
+    next_out = (Byte*)buf;
+    s->stream.next_out = (Bytef*)buf;
+    s->stream.avail_out = len;
+
+    while (s->stream.avail_out != 0) {
+
+	if (s->transparent) {
+	    /* Copy first the lookahead bytes: */
+	    uInt n = s->stream.avail_in;
+	    if (n > s->stream.avail_out) n = s->stream.avail_out;
+	    if (n > 0) {
+		zmemcpy(s->stream.next_out, s->stream.next_in, n);
+		next_out += n;
+		s->stream.next_out = next_out;
+		s->stream.next_in   += n;
+		s->stream.avail_out -= n;
+		s->stream.avail_in  -= n;
+	    }
+	    if (s->stream.avail_out > 0) {
+		s->stream.avail_out -= fread(next_out, 1, s->stream.avail_out,
+					     s->file);
+	    }
+	    len -= s->stream.avail_out;
+	    s->stream.total_in  += (uLong)len;
+	    s->stream.total_out += (uLong)len;
+            if (len == 0) s->z_eof = 1;
+	    return (int)len;
+	}
+        if (s->stream.avail_in == 0 && !s->z_eof) {
+
+            errno = 0;
+            s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file);
+            if (s->stream.avail_in == 0) {
+                s->z_eof = 1;
+		if (ferror(s->file)) {
+		    s->z_err = Z_ERRNO;
+		    break;
+		}
+            }
+            s->stream.next_in = s->inbuf;
+        }
+        s->z_err = inflate(&(s->stream), Z_NO_FLUSH);
+
+	if (s->z_err == Z_STREAM_END) {
+	    /* Check CRC and original size */
+	    s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
+	    start = s->stream.next_out;
+
+	    if (getLong(s) != s->crc) {
+		s->z_err = Z_DATA_ERROR;
+	    } else {
+	        (void)getLong(s);
+                /* The uncompressed length returned by above getlong() may
+                 * be different from s->stream.total_out) in case of
+		 * concatenated .gz files. Check for such files:
+		 */
+		check_header(s);
+		if (s->z_err == Z_OK) {
+		    uLong total_in = s->stream.total_in;
+		    uLong total_out = s->stream.total_out;
+
+		    inflateReset(&(s->stream));
+		    s->stream.total_in = total_in;
+		    s->stream.total_out = total_out;
+		    s->crc = crc32(0L, Z_NULL, 0);
+		}
+	    }
+	}
+	if (s->z_err != Z_OK || s->z_eof) break;
+    }
+    s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
+
+    return (int)(len - s->stream.avail_out);
+}
+
+
+/* ===========================================================================
+      Reads one byte from the compressed file. gzgetc returns this byte
+   or -1 in case of end of file or error.
+*/
+int ZEXPORT gzgetc(file)
+    gzFile file;
+{
+    unsigned char c;
+
+    return gzread(file, &c, 1) == 1 ? c : -1;
+}
+
+
+/* ===========================================================================
+      Reads bytes from the compressed file until len-1 characters are
+   read, or a newline character is read and transferred to buf, or an
+   end-of-file condition is encountered.  The string is then terminated
+   with a null character.
+      gzgets returns buf, or Z_NULL in case of error.
+
+      The current implementation is not optimized at all.
+*/
+char * ZEXPORT gzgets(file, buf, len)
+    gzFile file;
+    char *buf;
+    int len;
+{
+    char *b = buf;
+    if (buf == Z_NULL || len <= 0) return Z_NULL;
+
+    while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ;
+    *buf = '\0';
+    return b == buf && len > 0 ? Z_NULL : b;
+}
+
+
+#ifndef NO_DEFLATE
+/* ===========================================================================
+     Writes the given number of uncompressed bytes into the compressed file.
+   gzwrite returns the number of bytes actually written (0 in case of error).
+*/
+int ZEXPORT gzwrite (file, buf, len)
+    gzFile file;
+    const voidp buf;
+    unsigned len;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+    s->stream.next_in = (Bytef*)buf;
+    s->stream.avail_in = len;
+
+    while (s->stream.avail_in != 0) {
+
+        if (s->stream.avail_out == 0) {
+
+            s->stream.next_out = s->outbuf;
+            if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
+                s->z_err = Z_ERRNO;
+                break;
+            }
+            s->stream.avail_out = Z_BUFSIZE;
+        }
+        s->z_err = deflate(&(s->stream), Z_NO_FLUSH);
+        if (s->z_err != Z_OK) break;
+    }
+    s->crc = crc32(s->crc, (const Bytef *)buf, len);
+
+    return (int)(len - s->stream.avail_in);
+}
+
+/* ===========================================================================
+     Converts, formats, and writes the args to the compressed file under
+   control of the format string, as in fprintf. gzprintf returns the number of
+   uncompressed bytes actually written (0 in case of error).
+*/
+#ifdef STDC
+#include <stdarg.h>
+
+int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...)
+{
+    char buf[Z_PRINTF_BUFSIZE];
+    va_list va;
+    int len;
+
+    va_start(va, format);
+#ifdef HAS_vsnprintf
+    len = vsnprintf(buf, sizeof(buf), format, va);
+#else
+    len = vsprintf(buf, format, va);
+#endif
+    va_end(va);
+    if ((len <= 0) || (len >= Z_PRINTF_BUFSIZE)) return 0;
+
+    return gzwrite(file, buf, (unsigned)len);
+}
+#else /* not ANSI C */
+
+int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+	               a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
+    gzFile file;
+    const char *format;
+    int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+	a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
+{
+    char buf[Z_PRINTF_BUFSIZE];
+    int len;
+
+#ifdef HAS_snprintf
+    len = snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
+	     a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#else
+    len = sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
+	    a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#endif
+    if ((len <= 0) || (len >= Z_PRINTF_BUFSIZE)) return 0;
+
+    return gzwrite(file, buf, len);
+}
+#endif
+
+/* ===========================================================================
+      Writes c, converted to an unsigned char, into the compressed file.
+   gzputc returns the value that was written, or -1 in case of error.
+*/
+int ZEXPORT gzputc(file, c)
+    gzFile file;
+    int c;
+{
+    unsigned char cc = (unsigned char) c; /* required for big endian systems */
+
+    return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1;
+}
+
+
+/* ===========================================================================
+      Writes the given null-terminated string to the compressed file, excluding
+   the terminating null character.
+      gzputs returns the number of characters written, or -1 in case of error.
+*/
+int ZEXPORT gzputs(file, s)
+    gzFile file;
+    const char *s;
+{
+    return gzwrite(file, (char*)s, (unsigned)strlen(s));
+}
+
+
+/* ===========================================================================
+     Flushes all pending output into the compressed file. The parameter
+   flush is as in the deflate() function.
+*/
+local int do_flush (file, flush)
+    gzFile file;
+    int flush;
+{
+    uInt len;
+    int done = 0;
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+    s->stream.avail_in = 0; /* should be zero already anyway */
+
+    for (;;) {
+        len = Z_BUFSIZE - s->stream.avail_out;
+
+        if (len != 0) {
+            if ((uInt)fwrite(s->outbuf, 1, len, s->file) != len) {
+                s->z_err = Z_ERRNO;
+                return Z_ERRNO;
+            }
+            s->stream.next_out = s->outbuf;
+            s->stream.avail_out = Z_BUFSIZE;
+        }
+        if (done) break;
+        s->z_err = deflate(&(s->stream), flush);
+
+	/* Ignore the second of two consecutive flushes: */
+	if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK;
+
+        /* deflate has finished flushing only when it hasn't used up
+         * all the available space in the output buffer: 
+         */
+        done = (s->stream.avail_out != 0 || s->z_err == Z_STREAM_END);
+ 
+        if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break;
+    }
+    return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
+}
+
+int ZEXPORT gzflush (file, flush)
+     gzFile file;
+     int flush;
+{
+    gz_stream *s = (gz_stream*)file;
+    int err = do_flush (file, flush);
+
+    if (err) return err;
+    fflush(s->file);
+    return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
+}
+#endif /* NO_DEFLATE */
+
+/* ===========================================================================
+      Sets the starting position for the next gzread or gzwrite on the given
+   compressed file. The offset represents a number of bytes in the
+      gzseek returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error.
+      SEEK_END is not implemented, returns error.
+      In this version of the library, gzseek can be extremely slow.
+*/
+z_off_t ZEXPORT gzseek (file, offset, whence)
+    gzFile file;
+    z_off_t offset;
+    int whence;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || whence == SEEK_END ||
+	s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) {
+	return -1L;
+    }
+    
+    if (s->mode == 'w') {
+#ifdef NO_DEFLATE
+	return -1L;
+#else
+	if (whence == SEEK_SET) {
+	    offset -= s->stream.total_in;
+	}
+	if (offset < 0) return -1L;
+
+	/* At this point, offset is the number of zero bytes to write. */
+	if (s->inbuf == Z_NULL) {
+	    s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */
+	    zmemzero(s->inbuf, Z_BUFSIZE);
+	}
+	while (offset > 0)  {
+	    uInt size = Z_BUFSIZE;
+	    if (offset < Z_BUFSIZE) size = (uInt)offset;
+
+	    size = gzwrite(file, s->inbuf, size);
+	    if (size == 0) return -1L;
+
+	    offset -= size;
+	}
+	return (z_off_t)s->stream.total_in;
+#endif
+    }
+    /* Rest of function is for reading only */
+
+    /* compute absolute position */
+    if (whence == SEEK_CUR) {
+	offset += s->stream.total_out;
+    }
+    if (offset < 0) return -1L;
+
+    if (s->transparent) {
+	/* map to fseek */
+	s->stream.avail_in = 0;
+	s->stream.next_in = s->inbuf;
+        if (fseek(s->file, offset, SEEK_SET) < 0) return -1L;
+
+	s->stream.total_in = s->stream.total_out = (uLong)offset;
+	return offset;
+    }
+
+    /* For a negative seek, rewind and use positive seek */
+    if ((uLong)offset >= s->stream.total_out) {
+	offset -= s->stream.total_out;
+    } else if (gzrewind(file) < 0) {
+	return -1L;
+    }
+    /* offset is now the number of bytes to skip. */
+
+    if (offset != 0 && s->outbuf == Z_NULL) {
+	s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
+    }
+    while (offset > 0)  {
+	int size = Z_BUFSIZE;
+	if (offset < Z_BUFSIZE) size = (int)offset;
+
+	size = gzread(file, s->outbuf, (uInt)size);
+	if (size <= 0) return -1L;
+	offset -= size;
+    }
+    return (z_off_t)s->stream.total_out;
+}
+
+/* ===========================================================================
+     Rewinds input file. 
+*/
+int ZEXPORT gzrewind (file)
+    gzFile file;
+{
+    gz_stream *s = (gz_stream*)file;
+    
+    if (s == NULL || s->mode != 'r') return -1;
+
+    s->z_err = Z_OK;
+    s->z_eof = 0;
+    s->stream.avail_in = 0;
+    s->stream.next_in = s->inbuf;
+    s->crc = crc32(0L, Z_NULL, 0);
+	
+    if (s->startpos == 0) { /* not a compressed file */
+	rewind(s->file);
+	return 0;
+    }
+
+    (void) inflateReset(&s->stream);
+    return fseek(s->file, s->startpos, SEEK_SET);
+}
+
+/* ===========================================================================
+     Returns the starting position for the next gzread or gzwrite on the
+   given compressed file. This position represents a number of bytes in the
+   uncompressed data stream.
+*/
+z_off_t ZEXPORT gztell (file)
+    gzFile file;
+{
+    return gzseek(file, 0L, SEEK_CUR);
+}
+
+/* ===========================================================================
+     Returns 1 when EOF has previously been detected reading the given
+   input stream, otherwise zero.
+*/
+int ZEXPORT gzeof (file)
+    gzFile file;
+{
+    gz_stream *s = (gz_stream*)file;
+    
+    return (s == NULL || s->mode != 'r') ? 0 : s->z_eof;
+}
+
+/* ===========================================================================
+   Outputs a long in LSB order to the given file
+*/
+local void putLong (file, x)
+    FILE *file;
+    uLong x;
+{
+    int n;
+    for (n = 0; n < 4; n++) {
+        fputc((int)(x & 0xff), file);
+        x >>= 8;
+    }
+}
+
+/* ===========================================================================
+   Reads a long in LSB order from the given gz_stream. Sets z_err in case
+   of error.
+*/
+local uLong getLong (s)
+    gz_stream *s;
+{
+    uLong x = (uLong)get_byte(s);
+    int c;
+
+    x += ((uLong)get_byte(s))<<8;
+    x += ((uLong)get_byte(s))<<16;
+    c = get_byte(s);
+    if (c == EOF) s->z_err = Z_DATA_ERROR;
+    x += ((uLong)c)<<24;
+    return x;
+}
+
+/* ===========================================================================
+     Flushes all pending output if necessary, closes the compressed file
+   and deallocates all the (de)compression state.
+*/
+int ZEXPORT gzclose (file)
+    gzFile file;
+{
+    int err;
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL) return Z_STREAM_ERROR;
+
+    if (s->mode == 'w') {
+#ifdef NO_DEFLATE
+	return Z_STREAM_ERROR;
+#else
+        err = do_flush (file, Z_FINISH);
+        if (err != Z_OK) return destroy((gz_stream*)file);
+
+        putLong (s->file, s->crc);
+        putLong (s->file, s->stream.total_in);
+#endif
+    }
+    return destroy((gz_stream*)file);
+}
+
+/* ===========================================================================
+     Returns the error message for the last error which occured on the
+   given compressed file. errnum is set to zlib error number. If an
+   error occured in the file system and not in the compression library,
+   errnum is set to Z_ERRNO and the application may consult errno
+   to get the exact error code.
+*/
+const char*  ZEXPORT gzerror (file, errnum)
+    gzFile file;
+    int *errnum;
+{
+    char *m;
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL) {
+        *errnum = Z_STREAM_ERROR;
+        return (const char*)ERR_MSG(Z_STREAM_ERROR);
+    }
+    *errnum = s->z_err;
+    if (*errnum == Z_OK) return (const char*)"";
+
+    m =  (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg);
+
+    if (m == NULL || *m == '\0') m = (char*)ERR_MSG(s->z_err);
+
+    TRYFREE(s->msg);
+    s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3);
+    strcpy(s->msg, s->path);
+    strcat(s->msg, ": ");
+    strcat(s->msg, m);
+    return (const char*)s->msg;
+}
diff --git a/nx-X11/extras/zlib/infblock.c b/nx-X11/extras/zlib/infblock.c
new file mode 100644
index 000000000..dd7a6d40a
--- /dev/null
+++ b/nx-X11/extras/zlib/infblock.c
@@ -0,0 +1,403 @@
+/* infblock.c -- interpret and process block types to last block
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+#include "zutil.h"
+#include "infblock.h"
+#include "inftrees.h"
+#include "infcodes.h"
+#include "infutil.h"
+
+struct inflate_codes_state {int dummy;}; /* for buggy compilers */
+
+/* simplify the use of the inflate_huft type with some defines */
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+/* Table for deflate from PKZIP's appnote.txt. */
+local const uInt border[] = { /* Order of the bit length code lengths */
+        16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+/*
+   Notes beyond the 1.93a appnote.txt:
+
+   1. Distance pointers never point before the beginning of the output
+      stream.
+   2. Distance pointers can point back across blocks, up to 32k away.
+   3. There is an implied maximum of 7 bits for the bit length table and
+      15 bits for the actual data.
+   4. If only one code exists, then it is encoded using one bit.  (Zero
+      would be more efficient, but perhaps a little confusing.)  If two
+      codes exist, they are coded using one bit each (0 and 1).
+   5. There is no way of sending zero distance codes--a dummy must be
+      sent if there are none.  (History: a pre 2.0 version of PKZIP would
+      store blocks with no distance codes, but this was discovered to be
+      too harsh a criterion.)  Valid only for 1.93a.  2.04c does allow
+      zero distance codes, which is sent as one code of zero bits in
+      length.
+   6. There are up to 286 literal/length codes.  Code 256 represents the
+      end-of-block.  Note however that the static length tree defines
+      288 codes just to fill out the Huffman codes.  Codes 286 and 287
+      cannot be used though, since there is no length base or extra bits
+      defined for them.  Similarily, there are up to 30 distance codes.
+      However, static trees define 32 codes (all 5 bits) to fill out the
+      Huffman codes, but the last two had better not show up in the data.
+   7. Unzip can check dynamic Huffman blocks for complete code sets.
+      The exception is that a single code would not be complete (see #4).
+   8. The five bits following the block type is really the number of
+      literal codes sent minus 257.
+   9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
+      (1+6+6).  Therefore, to output three times the length, you output
+      three codes (1+1+1), whereas to output four times the same length,
+      you only need two codes (1+3).  Hmm.
+  10. In the tree reconstruction algorithm, Code = Code + Increment
+      only if BitLength(i) is not zero.  (Pretty obvious.)
+  11. Correction: 4 Bits: # of Bit Length codes - 4     (4 - 19)
+  12. Note: length code 284 can represent 227-258, but length code 285
+      really is 258.  The last length deserves its own, short code
+      since it gets used a lot in very redundant files.  The length
+      258 is special since 258 - 3 (the min match length) is 255.
+  13. The literal/length and distance code bit lengths are read as a
+      single stream of lengths.  It is possible (and advantageous) for
+      a repeat code (16, 17, or 18) to go across the boundary between
+      the two sets of lengths.
+ */
+
+
+void inflate_blocks_reset(s, z, c)
+inflate_blocks_statef *s;
+z_streamp z;
+uLongf *c;
+{
+  if (c != Z_NULL)
+    *c = s->check;
+  if (s->mode == BTREE || s->mode == DTREE)
+    ZFREE(z, s->sub.trees.blens);
+  if (s->mode == CODES)
+    inflate_codes_free(s->sub.decode.codes, z);
+  s->mode = TYPE;
+  s->bitk = 0;
+  s->bitb = 0;
+  s->read = s->write = s->window;
+  if (s->checkfn != Z_NULL)
+    z->adler = s->check = (*s->checkfn)(0L, (const Bytef *)Z_NULL, 0);
+  Tracev((stderr, "inflate:   blocks reset\n"));
+}
+
+
+inflate_blocks_statef *inflate_blocks_new(z, c, w)
+z_streamp z;
+check_func c;
+uInt w;
+{
+  inflate_blocks_statef *s;
+
+  if ((s = (inflate_blocks_statef *)ZALLOC
+       (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
+    return s;
+  if ((s->hufts =
+       (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL)
+  {
+    ZFREE(z, s);
+    return Z_NULL;
+  }
+  if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
+  {
+    ZFREE(z, s->hufts);
+    ZFREE(z, s);
+    return Z_NULL;
+  }
+  s->end = s->window + w;
+  s->checkfn = c;
+  s->mode = TYPE;
+  Tracev((stderr, "inflate:   blocks allocated\n"));
+  inflate_blocks_reset(s, z, Z_NULL);
+  return s;
+}
+
+
+int inflate_blocks(s, z, r)
+inflate_blocks_statef *s;
+z_streamp z;
+int r;
+{
+  uInt t;               /* temporary storage */
+  uLong b;              /* bit buffer */
+  uInt k;               /* bits in bit buffer */
+  Bytef *p;             /* input data pointer */
+  uInt n;               /* bytes available there */
+  Bytef *q;             /* output window write pointer */
+  uInt m;               /* bytes to end of window or read pointer */
+
+  /* copy input/output information to locals (UPDATE macro restores) */
+  LOAD
+
+  /* process input based on current state */
+  while (1) switch (s->mode)
+  {
+    case TYPE:
+      NEEDBITS(3)
+      t = (uInt)b & 7;
+      s->last = t & 1;
+      switch (t >> 1)
+      {
+        case 0:                         /* stored */
+          Tracev((stderr, "inflate:     stored block%s\n",
+                 s->last ? " (last)" : ""));
+          DUMPBITS(3)
+          t = k & 7;                    /* go to byte boundary */
+          DUMPBITS(t)
+          s->mode = LENS;               /* get length of stored block */
+          break;
+        case 1:                         /* fixed */
+          Tracev((stderr, "inflate:     fixed codes block%s\n",
+                 s->last ? " (last)" : ""));
+          {
+            uInt bl, bd;
+            inflate_huft *tl, *td;
+
+            inflate_trees_fixed(&bl, &bd, &tl, &td, z);
+            s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
+            if (s->sub.decode.codes == Z_NULL)
+            {
+              r = Z_MEM_ERROR;
+              LEAVE
+            }
+          }
+          DUMPBITS(3)
+          s->mode = CODES;
+          break;
+        case 2:                         /* dynamic */
+          Tracev((stderr, "inflate:     dynamic codes block%s\n",
+                 s->last ? " (last)" : ""));
+          DUMPBITS(3)
+          s->mode = TABLE;
+          break;
+        case 3:                         /* illegal */
+          DUMPBITS(3)
+          s->mode = BAD;
+          z->msg = (char*)"invalid block type";
+          r = Z_DATA_ERROR;
+          LEAVE
+      }
+      break;
+    case LENS:
+      NEEDBITS(32)
+      if ((((~b) >> 16) & 0xffff) != (b & 0xffff))
+      {
+        s->mode = BAD;
+        z->msg = (char*)"invalid stored block lengths";
+        r = Z_DATA_ERROR;
+        LEAVE
+      }
+      s->sub.left = (uInt)b & 0xffff;
+      b = k = 0;                      /* dump bits */
+      Tracev((stderr, "inflate:       stored length %u\n", s->sub.left));
+      s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE);
+      break;
+    case STORED:
+      if (n == 0)
+        LEAVE
+      NEEDOUT
+      t = s->sub.left;
+      if (t > n) t = n;
+      if (t > m) t = m;
+      zmemcpy(q, p, t);
+      p += t;  n -= t;
+      q += t;  m -= t;
+      if ((s->sub.left -= t) != 0)
+        break;
+      Tracev((stderr, "inflate:       stored end, %lu total out\n",
+              z->total_out + (q >= s->read ? q - s->read :
+              (s->end - s->read) + (q - s->window))));
+      s->mode = s->last ? DRY : TYPE;
+      break;
+    case TABLE:
+      NEEDBITS(14)
+      s->sub.trees.table = t = (uInt)b & 0x3fff;
+#ifndef PKZIP_BUG_WORKAROUND
+      if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
+      {
+        s->mode = BAD;
+        z->msg = (char*)"too many length or distance symbols";
+        r = Z_DATA_ERROR;
+        LEAVE
+      }
+#endif
+      t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
+      if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
+      {
+        r = Z_MEM_ERROR;
+        LEAVE
+      }
+      DUMPBITS(14)
+      s->sub.trees.index = 0;
+      Tracev((stderr, "inflate:       table sizes ok\n"));
+      s->mode = BTREE;
+    case BTREE:
+      while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
+      {
+        NEEDBITS(3)
+        s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
+        DUMPBITS(3)
+      }
+      while (s->sub.trees.index < 19)
+        s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
+      s->sub.trees.bb = 7;
+      t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
+                             &s->sub.trees.tb, s->hufts, z);
+      if (t != Z_OK)
+      {
+        r = t;
+        if (r == Z_DATA_ERROR)
+        {
+          ZFREE(z, s->sub.trees.blens);
+          s->mode = BAD;
+        }
+        LEAVE
+      }
+      s->sub.trees.index = 0;
+      Tracev((stderr, "inflate:       bits tree ok\n"));
+      s->mode = DTREE;
+    case DTREE:
+      while (t = s->sub.trees.table,
+             s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
+      {
+        inflate_huft *h;
+        uInt i, j, c;
+
+        t = s->sub.trees.bb;
+        NEEDBITS(t)
+        h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
+        t = h->bits;
+        c = h->base;
+        if (c < 16)
+        {
+          DUMPBITS(t)
+          s->sub.trees.blens[s->sub.trees.index++] = c;
+        }
+        else /* c == 16..18 */
+        {
+          i = c == 18 ? 7 : c - 14;
+          j = c == 18 ? 11 : 3;
+          NEEDBITS(t + i)
+          DUMPBITS(t)
+          j += (uInt)b & inflate_mask[i];
+          DUMPBITS(i)
+          i = s->sub.trees.index;
+          t = s->sub.trees.table;
+          if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
+              (c == 16 && i < 1))
+          {
+            ZFREE(z, s->sub.trees.blens);
+            s->mode = BAD;
+            z->msg = (char*)"invalid bit length repeat";
+            r = Z_DATA_ERROR;
+            LEAVE
+          }
+          c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
+          do {
+            s->sub.trees.blens[i++] = c;
+          } while (--j);
+          s->sub.trees.index = i;
+        }
+      }
+      s->sub.trees.tb = Z_NULL;
+      {
+        uInt bl, bd;
+        inflate_huft *tl, *td;
+        inflate_codes_statef *c;
+
+        bl = 9;         /* must be <= 9 for lookahead assumptions */
+        bd = 6;         /* must be <= 9 for lookahead assumptions */
+        t = s->sub.trees.table;
+        t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
+                                  s->sub.trees.blens, &bl, &bd, &tl, &td,
+                                  s->hufts, z);
+        if (t != Z_OK)
+        {
+          if (t == (uInt)Z_DATA_ERROR)
+          {
+            ZFREE(z, s->sub.trees.blens);
+            s->mode = BAD;
+          }
+          r = t;
+          LEAVE
+        }
+        Tracev((stderr, "inflate:       trees ok\n"));
+        if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
+        {
+          r = Z_MEM_ERROR;
+          LEAVE
+        }
+        s->sub.decode.codes = c;
+      }
+      ZFREE(z, s->sub.trees.blens);
+      s->mode = CODES;
+    case CODES:
+      UPDATE
+      if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
+        return inflate_flush(s, z, r);
+      r = Z_OK;
+      inflate_codes_free(s->sub.decode.codes, z);
+      LOAD
+      Tracev((stderr, "inflate:       codes end, %lu total out\n",
+              z->total_out + (q >= s->read ? q - s->read :
+              (s->end - s->read) + (q - s->window))));
+      if (!s->last)
+      {
+        s->mode = TYPE;
+        break;
+      }
+      s->mode = DRY;
+    case DRY:
+      FLUSH
+      if (s->read != s->write)
+        LEAVE
+      s->mode = DONE;
+    case DONE:
+      r = Z_STREAM_END;
+      LEAVE
+    case BAD:
+      r = Z_DATA_ERROR;
+      LEAVE
+    default:
+      r = Z_STREAM_ERROR;
+      LEAVE
+  }
+}
+
+
+int inflate_blocks_free(s, z)
+inflate_blocks_statef *s;
+z_streamp z;
+{
+  inflate_blocks_reset(s, z, Z_NULL);
+  ZFREE(z, s->window);
+  ZFREE(z, s->hufts);
+  ZFREE(z, s);
+  Tracev((stderr, "inflate:   blocks freed\n"));
+  return Z_OK;
+}
+
+
+void inflate_set_dictionary(s, d, n)
+inflate_blocks_statef *s;
+const Bytef *d;
+uInt  n;
+{
+  zmemcpy(s->window, d, n);
+  s->read = s->write = s->window + n;
+}
+
+
+/* Returns true if inflate is currently at the end of a block generated
+ * by Z_SYNC_FLUSH or Z_FULL_FLUSH. 
+ * IN assertion: s != Z_NULL
+ */
+int inflate_blocks_sync_point(s)
+inflate_blocks_statef *s;
+{
+  return s->mode == LENS;
+}
diff --git a/nx-X11/extras/zlib/infblock.h b/nx-X11/extras/zlib/infblock.h
new file mode 100644
index 000000000..173b2267a
--- /dev/null
+++ b/nx-X11/extras/zlib/infblock.h
@@ -0,0 +1,39 @@
+/* infblock.h -- header to use infblock.c
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+struct inflate_blocks_state;
+typedef struct inflate_blocks_state FAR inflate_blocks_statef;
+
+extern inflate_blocks_statef * inflate_blocks_new OF((
+    z_streamp z,
+    check_func c,               /* check function */
+    uInt w));                   /* window size */
+
+extern int inflate_blocks OF((
+    inflate_blocks_statef *,
+    z_streamp ,
+    int));                      /* initial return code */
+
+extern void inflate_blocks_reset OF((
+    inflate_blocks_statef *,
+    z_streamp ,
+    uLongf *));                  /* check value on output */
+
+extern int inflate_blocks_free OF((
+    inflate_blocks_statef *,
+    z_streamp));
+
+extern void inflate_set_dictionary OF((
+    inflate_blocks_statef *s,
+    const Bytef *d,  /* dictionary */
+    uInt  n));       /* dictionary length */
+
+extern int inflate_blocks_sync_point OF((
+    inflate_blocks_statef *s));
diff --git a/nx-X11/extras/zlib/infcodes.c b/nx-X11/extras/zlib/infcodes.c
new file mode 100644
index 000000000..9abe5412b
--- /dev/null
+++ b/nx-X11/extras/zlib/infcodes.c
@@ -0,0 +1,251 @@
+/* infcodes.c -- process literals and length/distance pairs
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "infblock.h"
+#include "infcodes.h"
+#include "infutil.h"
+#include "inffast.h"
+
+/* simplify the use of the inflate_huft type with some defines */
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+typedef enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
+      START,    /* x: set up for LEN */
+      LEN,      /* i: get length/literal/eob next */
+      LENEXT,   /* i: getting length extra (have base) */
+      DIST,     /* i: get distance next */
+      DISTEXT,  /* i: getting distance extra */
+      COPY,     /* o: copying bytes in window, waiting for space */
+      LIT,      /* o: got literal, waiting for output space */
+      WASH,     /* o: got eob, possibly still output waiting */
+      END,      /* x: got eob and all data flushed */
+      BADCODE}  /* x: got error */
+inflate_codes_mode;
+
+/* inflate codes private state */
+struct inflate_codes_state {
+
+  /* mode */
+  inflate_codes_mode mode;      /* current inflate_codes mode */
+
+  /* mode dependent information */
+  uInt len;
+  union {
+    struct {
+      inflate_huft *tree;       /* pointer into tree */
+      uInt need;                /* bits needed */
+    } code;             /* if LEN or DIST, where in tree */
+    uInt lit;           /* if LIT, literal */
+    struct {
+      uInt get;                 /* bits to get for extra */
+      uInt dist;                /* distance back to copy from */
+    } copy;             /* if EXT or COPY, where and how much */
+  } sub;                /* submode */
+
+  /* mode independent information */
+  Byte lbits;           /* ltree bits decoded per branch */
+  Byte dbits;           /* dtree bits decoder per branch */
+  inflate_huft *ltree;          /* literal/length/eob tree */
+  inflate_huft *dtree;          /* distance tree */
+
+};
+
+
+inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
+uInt bl, bd;
+inflate_huft *tl;
+inflate_huft *td; /* need separate declaration for Borland C++ */
+z_streamp z;
+{
+  inflate_codes_statef *c;
+
+  if ((c = (inflate_codes_statef *)
+       ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
+  {
+    c->mode = START;
+    c->lbits = (Byte)bl;
+    c->dbits = (Byte)bd;
+    c->ltree = tl;
+    c->dtree = td;
+    Tracev((stderr, "inflate:       codes new\n"));
+  }
+  return c;
+}
+
+
+int inflate_codes(s, z, r)
+inflate_blocks_statef *s;
+z_streamp z;
+int r;
+{
+  uInt j;               /* temporary storage */
+  inflate_huft *t;      /* temporary pointer */
+  uInt e;               /* extra bits or operation */
+  uLong b;              /* bit buffer */
+  uInt k;               /* bits in bit buffer */
+  Bytef *p;             /* input data pointer */
+  uInt n;               /* bytes available there */
+  Bytef *q;             /* output window write pointer */
+  uInt m;               /* bytes to end of window or read pointer */
+  Bytef *f;             /* pointer to copy strings from */
+  inflate_codes_statef *c = s->sub.decode.codes;  /* codes state */
+
+  /* copy input/output information to locals (UPDATE macro restores) */
+  LOAD
+
+  /* process input and output based on current state */
+  while (1) switch (c->mode)
+  {             /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
+    case START:         /* x: set up for LEN */
+#ifndef SLOW
+      if (m >= 258 && n >= 10)
+      {
+        UPDATE
+        r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
+        LOAD
+        if (r != Z_OK)
+        {
+          c->mode = r == Z_STREAM_END ? WASH : BADCODE;
+          break;
+        }
+      }
+#endif /* !SLOW */
+      c->sub.code.need = c->lbits;
+      c->sub.code.tree = c->ltree;
+      c->mode = LEN;
+    case LEN:           /* i: get length/literal/eob next */
+      j = c->sub.code.need;
+      NEEDBITS(j)
+      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
+      DUMPBITS(t->bits)
+      e = (uInt)(t->exop);
+      if (e == 0)               /* literal */
+      {
+        c->sub.lit = t->base;
+        Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+                 "inflate:         literal '%c'\n" :
+                 "inflate:         literal 0x%02x\n", t->base));
+        c->mode = LIT;
+        break;
+      }
+      if (e & 16)               /* length */
+      {
+        c->sub.copy.get = e & 15;
+        c->len = t->base;
+        c->mode = LENEXT;
+        break;
+      }
+      if ((e & 64) == 0)        /* next table */
+      {
+        c->sub.code.need = e;
+        c->sub.code.tree = t + t->base;
+        break;
+      }
+      if (e & 32)               /* end of block */
+      {
+        Tracevv((stderr, "inflate:         end of block\n"));
+        c->mode = WASH;
+        break;
+      }
+      c->mode = BADCODE;        /* invalid code */
+      z->msg = (char*)"invalid literal/length code";
+      r = Z_DATA_ERROR;
+      LEAVE
+    case LENEXT:        /* i: getting length extra (have base) */
+      j = c->sub.copy.get;
+      NEEDBITS(j)
+      c->len += (uInt)b & inflate_mask[j];
+      DUMPBITS(j)
+      c->sub.code.need = c->dbits;
+      c->sub.code.tree = c->dtree;
+      Tracevv((stderr, "inflate:         length %u\n", c->len));
+      c->mode = DIST;
+    case DIST:          /* i: get distance next */
+      j = c->sub.code.need;
+      NEEDBITS(j)
+      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
+      DUMPBITS(t->bits)
+      e = (uInt)(t->exop);
+      if (e & 16)               /* distance */
+      {
+        c->sub.copy.get = e & 15;
+        c->sub.copy.dist = t->base;
+        c->mode = DISTEXT;
+        break;
+      }
+      if ((e & 64) == 0)        /* next table */
+      {
+        c->sub.code.need = e;
+        c->sub.code.tree = t + t->base;
+        break;
+      }
+      c->mode = BADCODE;        /* invalid code */
+      z->msg = (char*)"invalid distance code";
+      r = Z_DATA_ERROR;
+      LEAVE
+    case DISTEXT:       /* i: getting distance extra */
+      j = c->sub.copy.get;
+      NEEDBITS(j)
+      c->sub.copy.dist += (uInt)b & inflate_mask[j];
+      DUMPBITS(j)
+      Tracevv((stderr, "inflate:         distance %u\n", c->sub.copy.dist));
+      c->mode = COPY;
+    case COPY:          /* o: copying bytes in window, waiting for space */
+      f = q - c->sub.copy.dist;
+      while (f < s->window)             /* modulo window size-"while" instead */
+        f += s->end - s->window;        /* of "if" handles invalid distances */
+      while (c->len)
+      {
+        NEEDOUT
+        OUTBYTE(*f++)
+        if (f == s->end)
+          f = s->window;
+        c->len--;
+      }
+      c->mode = START;
+      break;
+    case LIT:           /* o: got literal, waiting for output space */
+      NEEDOUT
+      OUTBYTE(c->sub.lit)
+      c->mode = START;
+      break;
+    case WASH:          /* o: got eob, possibly more output */
+      if (k > 7)        /* return unused byte, if any */
+      {
+        Assert(k < 16, "inflate_codes grabbed too many bytes")
+        k -= 8;
+        n++;
+        p--;            /* can always return one */
+      }
+      FLUSH
+      if (s->read != s->write)
+        LEAVE
+      c->mode = END;
+    case END:
+      r = Z_STREAM_END;
+      LEAVE
+    case BADCODE:       /* x: got error */
+      r = Z_DATA_ERROR;
+      LEAVE
+    default:
+      r = Z_STREAM_ERROR;
+      LEAVE
+  }
+#ifdef NEED_DUMMY_RETURN
+  return Z_STREAM_ERROR;  /* Some dumb compilers complain without this */
+#endif
+}
+
+
+void inflate_codes_free(c, z)
+inflate_codes_statef *c;
+z_streamp z;
+{
+  ZFREE(z, c);
+  Tracev((stderr, "inflate:       codes free\n"));
+}
diff --git a/nx-X11/extras/zlib/infcodes.h b/nx-X11/extras/zlib/infcodes.h
new file mode 100644
index 000000000..46821a02b
--- /dev/null
+++ b/nx-X11/extras/zlib/infcodes.h
@@ -0,0 +1,27 @@
+/* infcodes.h -- header to use infcodes.c
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+struct inflate_codes_state;
+typedef struct inflate_codes_state FAR inflate_codes_statef;
+
+extern inflate_codes_statef *inflate_codes_new OF((
+    uInt, uInt,
+    inflate_huft *, inflate_huft *,
+    z_streamp ));
+
+extern int inflate_codes OF((
+    inflate_blocks_statef *,
+    z_streamp ,
+    int));
+
+extern void inflate_codes_free OF((
+    inflate_codes_statef *,
+    z_streamp ));
+
diff --git a/nx-X11/extras/zlib/inffast.c b/nx-X11/extras/zlib/inffast.c
new file mode 100644
index 000000000..aa7f1d4d2
--- /dev/null
+++ b/nx-X11/extras/zlib/inffast.c
@@ -0,0 +1,183 @@
+/* inffast.c -- process literals and length/distance pairs fast
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "infblock.h"
+#include "infcodes.h"
+#include "infutil.h"
+#include "inffast.h"
+
+struct inflate_codes_state {int dummy;}; /* for buggy compilers */
+
+/* simplify the use of the inflate_huft type with some defines */
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+/* macros for bit input with no checking and for returning unused bytes */
+#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
+#define UNGRAB {c=z->avail_in-n;c=(k>>3)<c?k>>3:c;n+=c;p-=c;k-=c<<3;}
+
+/* Called with number of bytes left to write in window at least 258
+   (the maximum string length) and number of input bytes available
+   at least ten.  The ten bytes are six bytes for the longest length/
+   distance pair plus four bytes for overloading the bit buffer. */
+
+int inflate_fast(bl, bd, tl, td, s, z)
+uInt bl, bd;
+inflate_huft *tl;
+inflate_huft *td; /* need separate declaration for Borland C++ */
+inflate_blocks_statef *s;
+z_streamp z;
+{
+  inflate_huft *t;      /* temporary pointer */
+  uInt e;               /* extra bits or operation */
+  uLong b;              /* bit buffer */
+  uInt k;               /* bits in bit buffer */
+  Bytef *p;             /* input data pointer */
+  uInt n;               /* bytes available there */
+  Bytef *q;             /* output window write pointer */
+  uInt m;               /* bytes to end of window or read pointer */
+  uInt ml;              /* mask for literal/length tree */
+  uInt md;              /* mask for distance tree */
+  uInt c;               /* bytes to copy */
+  uInt d;               /* distance back to copy from */
+  Bytef *r;             /* copy source pointer */
+
+  /* load input, output, bit values */
+  LOAD
+
+  /* initialize masks */
+  ml = inflate_mask[bl];
+  md = inflate_mask[bd];
+
+  /* do until not enough input or output space for fast loop */
+  do {                          /* assume called with m >= 258 && n >= 10 */
+    /* get literal/length code */
+    GRABBITS(20)                /* max bits for literal/length code */
+    if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
+    {
+      DUMPBITS(t->bits)
+      Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+                "inflate:         * literal '%c'\n" :
+                "inflate:         * literal 0x%02x\n", t->base));
+      *q++ = (Byte)t->base;
+      m--;
+      continue;
+    }
+    do {
+      DUMPBITS(t->bits)
+      if (e & 16)
+      {
+        /* get extra bits for length */
+        e &= 15;
+        c = t->base + ((uInt)b & inflate_mask[e]);
+        DUMPBITS(e)
+        Tracevv((stderr, "inflate:         * length %u\n", c));
+
+        /* decode distance base of block to copy */
+        GRABBITS(15);           /* max bits for distance code */
+        e = (t = td + ((uInt)b & md))->exop;
+        do {
+          DUMPBITS(t->bits)
+          if (e & 16)
+          {
+            /* get extra bits to add to distance base */
+            e &= 15;
+            GRABBITS(e)         /* get extra bits (up to 13) */
+            d = t->base + ((uInt)b & inflate_mask[e]);
+            DUMPBITS(e)
+            Tracevv((stderr, "inflate:         * distance %u\n", d));
+
+            /* do the copy */
+            m -= c;
+            r = q - d;
+            if (r < s->window)                  /* wrap if needed */
+            {
+              do {
+                r += s->end - s->window;        /* force pointer in window */
+              } while (r < s->window);          /* covers invalid distances */
+              e = s->end - r;
+              if (c > e)
+              {
+                c -= e;                         /* wrapped copy */
+                do {
+                    *q++ = *r++;
+                } while (--e);
+                r = s->window;
+                do {
+                    *q++ = *r++;
+                } while (--c);
+              }
+              else                              /* normal copy */
+              {
+                *q++ = *r++;  c--;
+                *q++ = *r++;  c--;
+                do {
+                    *q++ = *r++;
+                } while (--c);
+              }
+            }
+            else                                /* normal copy */
+            {
+              *q++ = *r++;  c--;
+              *q++ = *r++;  c--;
+              do {
+                *q++ = *r++;
+              } while (--c);
+            }
+            break;
+          }
+          else if ((e & 64) == 0)
+          {
+            t += t->base;
+            e = (t += ((uInt)b & inflate_mask[e]))->exop;
+          }
+          else
+          {
+            z->msg = (char*)"invalid distance code";
+            UNGRAB
+            UPDATE
+            return Z_DATA_ERROR;
+          }
+        } while (1);
+        break;
+      }
+      if ((e & 64) == 0)
+      {
+        t += t->base;
+        if ((e = (t += ((uInt)b & inflate_mask[e]))->exop) == 0)
+        {
+          DUMPBITS(t->bits)
+          Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+                    "inflate:         * literal '%c'\n" :
+                    "inflate:         * literal 0x%02x\n", t->base));
+          *q++ = (Byte)t->base;
+          m--;
+          break;
+        }
+      }
+      else if (e & 32)
+      {
+        Tracevv((stderr, "inflate:         * end of block\n"));
+        UNGRAB
+        UPDATE
+        return Z_STREAM_END;
+      }
+      else
+      {
+        z->msg = (char*)"invalid literal/length code";
+        UNGRAB
+        UPDATE
+        return Z_DATA_ERROR;
+      }
+    } while (1);
+  } while (m >= 258 && n >= 10);
+
+  /* not enough input or output--restore pointers and return */
+  UNGRAB
+  UPDATE
+  return Z_OK;
+}
diff --git a/nx-X11/extras/zlib/inffast.h b/nx-X11/extras/zlib/inffast.h
new file mode 100644
index 000000000..a31a4bbb0
--- /dev/null
+++ b/nx-X11/extras/zlib/inffast.h
@@ -0,0 +1,17 @@
+/* inffast.h -- header to use inffast.c
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+extern int inflate_fast OF((
+    uInt,
+    uInt,
+    inflate_huft *,
+    inflate_huft *,
+    inflate_blocks_statef *,
+    z_streamp ));
diff --git a/nx-X11/extras/zlib/inffixed.h b/nx-X11/extras/zlib/inffixed.h
new file mode 100644
index 000000000..77f7e7631
--- /dev/null
+++ b/nx-X11/extras/zlib/inffixed.h
@@ -0,0 +1,151 @@
+/* inffixed.h -- table for decoding fixed codes
+ * Generated automatically by the maketree.c program
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+local uInt fixed_bl = 9;
+local uInt fixed_bd = 5;
+local inflate_huft fixed_tl[] = {
+    {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
+    {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192},
+    {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160},
+    {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224},
+    {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144},
+    {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208},
+    {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176},
+    {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240},
+    {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
+    {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200},
+    {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168},
+    {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232},
+    {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152},
+    {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216},
+    {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184},
+    {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248},
+    {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
+    {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196},
+    {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164},
+    {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228},
+    {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148},
+    {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212},
+    {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180},
+    {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244},
+    {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
+    {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204},
+    {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172},
+    {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236},
+    {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156},
+    {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220},
+    {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188},
+    {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252},
+    {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
+    {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194},
+    {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162},
+    {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226},
+    {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146},
+    {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210},
+    {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178},
+    {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242},
+    {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
+    {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202},
+    {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170},
+    {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234},
+    {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154},
+    {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218},
+    {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186},
+    {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250},
+    {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
+    {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198},
+    {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166},
+    {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230},
+    {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150},
+    {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214},
+    {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182},
+    {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246},
+    {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
+    {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206},
+    {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174},
+    {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238},
+    {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158},
+    {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222},
+    {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190},
+    {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254},
+    {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
+    {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193},
+    {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161},
+    {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225},
+    {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145},
+    {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209},
+    {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177},
+    {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241},
+    {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
+    {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201},
+    {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169},
+    {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233},
+    {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153},
+    {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217},
+    {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185},
+    {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249},
+    {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
+    {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197},
+    {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165},
+    {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229},
+    {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149},
+    {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213},
+    {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181},
+    {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245},
+    {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
+    {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205},
+    {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173},
+    {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237},
+    {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157},
+    {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221},
+    {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189},
+    {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253},
+    {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
+    {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195},
+    {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163},
+    {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227},
+    {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147},
+    {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211},
+    {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179},
+    {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243},
+    {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
+    {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203},
+    {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171},
+    {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235},
+    {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155},
+    {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219},
+    {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187},
+    {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251},
+    {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
+    {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199},
+    {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167},
+    {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231},
+    {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151},
+    {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215},
+    {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183},
+    {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247},
+    {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
+    {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207},
+    {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175},
+    {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239},
+    {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159},
+    {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223},
+    {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191},
+    {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255}
+  };
+local inflate_huft fixed_td[] = {
+    {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097},
+    {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385},
+    {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193},
+    {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577},
+    {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145},
+    {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577},
+    {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289},
+    {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577}
+  };
diff --git a/nx-X11/extras/zlib/inflate.c b/nx-X11/extras/zlib/inflate.c
new file mode 100644
index 000000000..dfb2e867d
--- /dev/null
+++ b/nx-X11/extras/zlib/inflate.c
@@ -0,0 +1,366 @@
+/* inflate.c -- zlib interface to inflate modules
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+#include "zutil.h"
+#include "infblock.h"
+
+struct inflate_blocks_state {int dummy;}; /* for buggy compilers */
+
+typedef enum {
+      METHOD,   /* waiting for method byte */
+      FLAG,     /* waiting for flag byte */
+      DICT4,    /* four dictionary check bytes to go */
+      DICT3,    /* three dictionary check bytes to go */
+      DICT2,    /* two dictionary check bytes to go */
+      DICT1,    /* one dictionary check byte to go */
+      DICT0,    /* waiting for inflateSetDictionary */
+      BLOCKS,   /* decompressing blocks */
+      CHECK4,   /* four check bytes to go */
+      CHECK3,   /* three check bytes to go */
+      CHECK2,   /* two check bytes to go */
+      CHECK1,   /* one check byte to go */
+      DONE,     /* finished check, done */
+      BAD}      /* got an error--stay here */
+inflate_mode;
+
+/* inflate private state */
+struct internal_state {
+
+  /* mode */
+  inflate_mode  mode;   /* current inflate mode */
+
+  /* mode dependent information */
+  union {
+    uInt method;        /* if FLAGS, method byte */
+    struct {
+      uLong was;                /* computed check value */
+      uLong need;               /* stream check value */
+    } check;            /* if CHECK, check values to compare */
+    uInt marker;        /* if BAD, inflateSync's marker bytes count */
+  } sub;        /* submode */
+
+  /* mode independent information */
+  int  nowrap;          /* flag for no wrapper */
+  uInt wbits;           /* log2(window size)  (8..15, defaults to 15) */
+  inflate_blocks_statef 
+    *blocks;            /* current inflate_blocks state */
+
+};
+
+
+int ZEXPORT inflateReset(z)
+z_streamp z;
+{
+  if (z == Z_NULL || z->state == Z_NULL)
+    return Z_STREAM_ERROR;
+  z->total_in = z->total_out = 0;
+  z->msg = Z_NULL;
+  z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
+  inflate_blocks_reset(z->state->blocks, z, Z_NULL);
+  Tracev((stderr, "inflate: reset\n"));
+  return Z_OK;
+}
+
+
+int ZEXPORT inflateEnd(z)
+z_streamp z;
+{
+  if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
+    return Z_STREAM_ERROR;
+  if (z->state->blocks != Z_NULL)
+    inflate_blocks_free(z->state->blocks, z);
+  ZFREE(z, z->state);
+  z->state = Z_NULL;
+  Tracev((stderr, "inflate: end\n"));
+  return Z_OK;
+}
+
+
+int ZEXPORT inflateInit2_(z, w, version, stream_size)
+z_streamp z;
+int w;
+const char *version;
+int stream_size;
+{
+  if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+      stream_size != sizeof(z_stream))
+      return Z_VERSION_ERROR;
+
+  /* initialize state */
+  if (z == Z_NULL)
+    return Z_STREAM_ERROR;
+  z->msg = Z_NULL;
+  if (z->zalloc == Z_NULL)
+  {
+    z->zalloc = zcalloc;
+    z->opaque = (voidpf)0;
+  }
+  if (z->zfree == Z_NULL) z->zfree = zcfree;
+  if ((z->state = (struct internal_state FAR *)
+       ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
+    return Z_MEM_ERROR;
+  z->state->blocks = Z_NULL;
+
+  /* handle undocumented nowrap option (no zlib header or check) */
+  z->state->nowrap = 0;
+  if (w < 0)
+  {
+    w = - w;
+    z->state->nowrap = 1;
+  }
+
+  /* set window size */
+  if (w < 8 || w > 15)
+  {
+    inflateEnd(z);
+    return Z_STREAM_ERROR;
+  }
+  z->state->wbits = (uInt)w;
+
+  /* create inflate_blocks state */
+  if ((z->state->blocks =
+      inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w))
+      == Z_NULL)
+  {
+    inflateEnd(z);
+    return Z_MEM_ERROR;
+  }
+  Tracev((stderr, "inflate: allocated\n"));
+
+  /* reset state */
+  inflateReset(z);
+  return Z_OK;
+}
+
+
+int ZEXPORT inflateInit_(z, version, stream_size)
+z_streamp z;
+const char *version;
+int stream_size;
+{
+  return inflateInit2_(z, DEF_WBITS, version, stream_size);
+}
+
+
+#define NEEDBYTE {if(z->avail_in==0)return r;r=f;}
+#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
+
+int ZEXPORT inflate(z, f)
+z_streamp z;
+int f;
+{
+  int r;
+  uInt b;
+
+  if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL)
+    return Z_STREAM_ERROR;
+  f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK;
+  r = Z_BUF_ERROR;
+  while (1) switch (z->state->mode)
+  {
+    case METHOD:
+      NEEDBYTE
+      if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED)
+      {
+        z->state->mode = BAD;
+        z->msg = (char*)"unknown compression method";
+        z->state->sub.marker = 5;       /* can't try inflateSync */
+        break;
+      }
+      if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
+      {
+        z->state->mode = BAD;
+        z->msg = (char*)"invalid window size";
+        z->state->sub.marker = 5;       /* can't try inflateSync */
+        break;
+      }
+      z->state->mode = FLAG;
+    case FLAG:
+      NEEDBYTE
+      b = NEXTBYTE;
+      if (((z->state->sub.method << 8) + b) % 31)
+      {
+        z->state->mode = BAD;
+        z->msg = (char*)"incorrect header check";
+        z->state->sub.marker = 5;       /* can't try inflateSync */
+        break;
+      }
+      Tracev((stderr, "inflate: zlib header ok\n"));
+      if (!(b & PRESET_DICT))
+      {
+        z->state->mode = BLOCKS;
+        break;
+      }
+      z->state->mode = DICT4;
+    case DICT4:
+      NEEDBYTE
+      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
+      z->state->mode = DICT3;
+    case DICT3:
+      NEEDBYTE
+      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
+      z->state->mode = DICT2;
+    case DICT2:
+      NEEDBYTE
+      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
+      z->state->mode = DICT1;
+    case DICT1:
+      NEEDBYTE
+      z->state->sub.check.need += (uLong)NEXTBYTE;
+      z->adler = z->state->sub.check.need;
+      z->state->mode = DICT0;
+      return Z_NEED_DICT;
+    case DICT0:
+      z->state->mode = BAD;
+      z->msg = (char*)"need dictionary";
+      z->state->sub.marker = 0;       /* can try inflateSync */
+      return Z_STREAM_ERROR;
+    case BLOCKS:
+      r = inflate_blocks(z->state->blocks, z, r);
+      if (r == Z_DATA_ERROR)
+      {
+        z->state->mode = BAD;
+        z->state->sub.marker = 0;       /* can try inflateSync */
+        break;
+      }
+      if (r == Z_OK)
+        r = f;
+      if (r != Z_STREAM_END)
+        return r;
+      r = f;
+      inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
+      if (z->state->nowrap)
+      {
+        z->state->mode = DONE;
+        break;
+      }
+      z->state->mode = CHECK4;
+    case CHECK4:
+      NEEDBYTE
+      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
+      z->state->mode = CHECK3;
+    case CHECK3:
+      NEEDBYTE
+      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
+      z->state->mode = CHECK2;
+    case CHECK2:
+      NEEDBYTE
+      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
+      z->state->mode = CHECK1;
+    case CHECK1:
+      NEEDBYTE
+      z->state->sub.check.need += (uLong)NEXTBYTE;
+
+      if (z->state->sub.check.was != z->state->sub.check.need)
+      {
+        z->state->mode = BAD;
+        z->msg = (char*)"incorrect data check";
+        z->state->sub.marker = 5;       /* can't try inflateSync */
+        break;
+      }
+      Tracev((stderr, "inflate: zlib check ok\n"));
+      z->state->mode = DONE;
+    case DONE:
+      return Z_STREAM_END;
+    case BAD:
+      return Z_DATA_ERROR;
+    default:
+      return Z_STREAM_ERROR;
+  }
+#ifdef NEED_DUMMY_RETURN
+  return Z_STREAM_ERROR;  /* Some dumb compilers complain without this */
+#endif
+}
+
+
+int ZEXPORT inflateSetDictionary(z, dictionary, dictLength)
+z_streamp z;
+const Bytef *dictionary;
+uInt  dictLength;
+{
+  uInt length = dictLength;
+
+  if (z == Z_NULL || z->state == Z_NULL || z->state->mode != DICT0)
+    return Z_STREAM_ERROR;
+
+  if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR;
+  z->adler = 1L;
+
+  if (length >= ((uInt)1<<z->state->wbits))
+  {
+    length = (1<<z->state->wbits)-1;
+    dictionary += dictLength - length;
+  }
+  inflate_set_dictionary(z->state->blocks, dictionary, length);
+  z->state->mode = BLOCKS;
+  return Z_OK;
+}
+
+
+int ZEXPORT inflateSync(z)
+z_streamp z;
+{
+  uInt n;       /* number of bytes to look at */
+  Bytef *p;     /* pointer to bytes */
+  uInt m;       /* number of marker bytes found in a row */
+  uLong r, w;   /* temporaries to save total_in and total_out */
+
+  /* set up */
+  if (z == Z_NULL || z->state == Z_NULL)
+    return Z_STREAM_ERROR;
+  if (z->state->mode != BAD)
+  {
+    z->state->mode = BAD;
+    z->state->sub.marker = 0;
+  }
+  if ((n = z->avail_in) == 0)
+    return Z_BUF_ERROR;
+  p = z->next_in;
+  m = z->state->sub.marker;
+
+  /* search */
+  while (n && m < 4)
+  {
+    static const Byte mark[4] = {0, 0, 0xff, 0xff};
+    if (*p == mark[m])
+      m++;
+    else if (*p)
+      m = 0;
+    else
+      m = 4 - m;
+    p++, n--;
+  }
+
+  /* restore */
+  z->total_in += p - z->next_in;
+  z->next_in = p;
+  z->avail_in = n;
+  z->state->sub.marker = m;
+
+  /* return no joy or set up to restart on a new block */
+  if (m != 4)
+    return Z_DATA_ERROR;
+  r = z->total_in;  w = z->total_out;
+  inflateReset(z);
+  z->total_in = r;  z->total_out = w;
+  z->state->mode = BLOCKS;
+  return Z_OK;
+}
+
+
+/* Returns true if inflate is currently at the end of a block generated
+ * by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+ * implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH
+ * but removes the length bytes of the resulting empty stored block. When
+ * decompressing, PPP checks that at the end of input packet, inflate is
+ * waiting for these length bytes.
+ */
+int ZEXPORT inflateSyncPoint(z)
+z_streamp z;
+{
+  if (z == Z_NULL || z->state == Z_NULL || z->state->blocks == Z_NULL)
+    return Z_STREAM_ERROR;
+  return inflate_blocks_sync_point(z->state->blocks);
+}
diff --git a/nx-X11/extras/zlib/inftrees.c b/nx-X11/extras/zlib/inftrees.c
new file mode 100644
index 000000000..4c32ca30d
--- /dev/null
+++ b/nx-X11/extras/zlib/inftrees.c
@@ -0,0 +1,454 @@
+/* inftrees.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+
+#if !defined(BUILDFIXED) && !defined(STDC)
+#  define BUILDFIXED   /* non ANSI compilers may not accept inffixed.h */
+#endif
+
+const char inflate_copyright[] =
+   " inflate 1.1.4 Copyright 1995-2002 Mark Adler ";
+/*
+  If you use the zlib library in a product, an acknowledgment is welcome
+  in the documentation of your product. If for some reason you cannot
+  include such an acknowledgment, I would appreciate that you keep this
+  copyright string in the executable of your product.
+ */
+struct internal_state  {int dummy;}; /* for buggy compilers */
+
+/* simplify the use of the inflate_huft type with some defines */
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+
+local int huft_build OF((
+    uIntf *,            /* code lengths in bits */
+    uInt,               /* number of codes */
+    uInt,               /* number of "simple" codes */
+    const uIntf *,      /* list of base values for non-simple codes */
+    const uIntf *,      /* list of extra bits for non-simple codes */
+    inflate_huft * FAR*,/* result: starting table */
+    uIntf *,            /* maximum lookup bits (returns actual) */
+    inflate_huft *,     /* space for trees */
+    uInt *,             /* hufts used in space */
+    uIntf * ));         /* space for values */
+
+/* Tables for deflate from PKZIP's appnote.txt. */
+local const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */
+        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+        /* see note #13 above about 258 */
+local const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */
+        0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
+        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */
+local const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */
+        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+        8193, 12289, 16385, 24577};
+local const uInt cpdext[30] = { /* Extra bits for distance codes */
+        0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
+        7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
+        12, 12, 13, 13};
+
+/*
+   Huffman code decoding is performed using a multi-level table lookup.
+   The fastest way to decode is to simply build a lookup table whose
+   size is determined by the longest code.  However, the time it takes
+   to build this table can also be a factor if the data being decoded
+   is not very long.  The most common codes are necessarily the
+   shortest codes, so those codes dominate the decoding time, and hence
+   the speed.  The idea is you can have a shorter table that decodes the
+   shorter, more probable codes, and then point to subsidiary tables for
+   the longer codes.  The time it costs to decode the longer codes is
+   then traded against the time it takes to make longer tables.
+
+   This results of this trade are in the variables lbits and dbits
+   below.  lbits is the number of bits the first level table for literal/
+   length codes can decode in one step, and dbits is the same thing for
+   the distance codes.  Subsequent tables are also less than or equal to
+   those sizes.  These values may be adjusted either when all of the
+   codes are shorter than that, in which case the longest code length in
+   bits is used, or when the shortest code is *longer* than the requested
+   table size, in which case the length of the shortest code in bits is
+   used.
+
+   There are two different values for the two tables, since they code a
+   different number of possibilities each.  The literal/length table
+   codes 286 possible values, or in a flat code, a little over eight
+   bits.  The distance table codes 30 possible values, or a little less
+   than five bits, flat.  The optimum values for speed end up being
+   about one bit more than those, so lbits is 8+1 and dbits is 5+1.
+   The optimum values may differ though from machine to machine, and
+   possibly even between compilers.  Your mileage may vary.
+ */
+
+
+/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
+#define BMAX 15         /* maximum bit length of any code */
+
+local int huft_build(b, n, s, d, e, t, m, hp, hn, v)
+uIntf *b;               /* code lengths in bits (all assumed <= BMAX) */
+uInt n;                 /* number of codes (assumed <= 288) */
+uInt s;                 /* number of simple-valued codes (0..s-1) */
+const uIntf *d;         /* list of base values for non-simple codes */
+const uIntf *e;         /* list of extra bits for non-simple codes */
+inflate_huft * FAR *t;  /* result: starting table */
+uIntf *m;               /* maximum lookup bits, returns actual */
+inflate_huft *hp;       /* space for trees */
+uInt *hn;               /* hufts used in space */
+uIntf *v;               /* working area: values in order of bit length */
+/* Given a list of code lengths and a maximum table size, make a set of
+   tables to decode that set of codes.  Return Z_OK on success, Z_BUF_ERROR
+   if the given code set is incomplete (the tables are still built in this
+   case), or Z_DATA_ERROR if the input is invalid. */
+{
+
+  uInt a;                       /* counter for codes of length k */
+  uInt c[BMAX+1];               /* bit length count table */
+  uInt f;                       /* i repeats in table every f entries */
+  int g;                        /* maximum code length */
+  int h;                        /* table level */
+  register uInt i;              /* counter, current code */
+  register uInt j;              /* counter */
+  register int k;               /* number of bits in current code */
+  int l;                        /* bits per table (returned in m) */
+  uInt mask;                    /* (1 << w) - 1, to avoid cc -O bug on HP */
+  register uIntf *p;            /* pointer into c[], b[], or v[] */
+  inflate_huft *q;              /* points to current table */
+  struct inflate_huft_s r;      /* table entry for structure assignment */
+  inflate_huft *u[BMAX];        /* table stack */
+  register int w;               /* bits before this table == (l * h) */
+  uInt x[BMAX+1];               /* bit offsets, then code stack */
+  uIntf *xp;                    /* pointer into x */
+  int y;                        /* number of dummy codes added */
+  uInt z;                       /* number of entries in current table */
+
+
+  /* Generate counts for each bit length */
+  p = c;
+#define C0 *p++ = 0;
+#define C2 C0 C0 C0 C0
+#define C4 C2 C2 C2 C2
+  C4                            /* clear c[]--assume BMAX+1 is 16 */
+  p = b;  i = n;
+  do {
+    c[*p++]++;                  /* assume all entries <= BMAX */
+  } while (--i);
+  if (c[0] == n)                /* null input--all zero length codes */
+  {
+    *t = (inflate_huft *)Z_NULL;
+    *m = 0;
+    return Z_OK;
+  }
+
+
+  /* Find minimum and maximum length, bound *m by those */
+  l = *m;
+  for (j = 1; j <= BMAX; j++)
+    if (c[j])
+      break;
+  k = j;                        /* minimum code length */
+  if ((uInt)l < j)
+    l = j;
+  for (i = BMAX; i; i--)
+    if (c[i])
+      break;
+  g = i;                        /* maximum code length */
+  if ((uInt)l > i)
+    l = i;
+  *m = l;
+
+
+  /* Adjust last length count to fill out codes, if needed */
+  for (y = 1 << j; j < i; j++, y <<= 1)
+    if ((y -= c[j]) < 0)
+      return Z_DATA_ERROR;
+  if ((y -= c[i]) < 0)
+    return Z_DATA_ERROR;
+  c[i] += y;
+
+
+  /* Generate starting offsets into the value table for each length */
+  x[1] = j = 0;
+  p = c + 1;  xp = x + 2;
+  while (--i) {                 /* note that i == g from above */
+    *xp++ = (j += *p++);
+  }
+
+
+  /* Make a table of values in order of bit lengths */
+  p = b;  i = 0;
+  do {
+    if ((j = *p++) != 0)
+      v[x[j]++] = i;
+  } while (++i < n);
+  n = x[g];                     /* set n to length of v */
+
+
+  /* Generate the Huffman codes and for each, make the table entries */
+  x[0] = i = 0;                 /* first Huffman code is zero */
+  p = v;                        /* grab values in bit order */
+  h = -1;                       /* no tables yet--level -1 */
+  w = -l;                       /* bits decoded == (l * h) */
+  u[0] = (inflate_huft *)Z_NULL;        /* just to keep compilers happy */
+  q = (inflate_huft *)Z_NULL;   /* ditto */
+  z = 0;                        /* ditto */
+
+  /* go through the bit lengths (k already is bits in shortest code) */
+  for (; k <= g; k++)
+  {
+    a = c[k];
+    while (a--)
+    {
+      /* here i is the Huffman code of length k bits for value *p */
+      /* make tables up to required level */
+      while (k > w + l)
+      {
+        h++;
+        w += l;                 /* previous table always l bits */
+
+        /* compute minimum size table less than or equal to l bits */
+        z = g - w;
+        z = z > (uInt)l ? l : z;        /* table size upper limit */
+        if ((f = 1 << (j = k - w)) > a + 1)     /* try a k-w bit table */
+        {                       /* too few codes for k-w bit table */
+          f -= a + 1;           /* deduct codes from patterns left */
+          xp = c + k;
+          if (j < z)
+            while (++j < z)     /* try smaller tables up to z bits */
+            {
+              if ((f <<= 1) <= *++xp)
+                break;          /* enough codes to use up j bits */
+              f -= *xp;         /* else deduct codes from patterns */
+            }
+        }
+        z = 1 << j;             /* table entries for j-bit table */
+
+        /* allocate new table */
+        if (*hn + z > MANY)     /* (note: doesn't matter for fixed) */
+          return Z_DATA_ERROR;  /* overflow of MANY */
+        u[h] = q = hp + *hn;
+        *hn += z;
+
+        /* connect to last table, if there is one */
+        if (h)
+        {
+          x[h] = i;             /* save pattern for backing up */
+          r.bits = (Byte)l;     /* bits to dump before this table */
+          r.exop = (Byte)j;     /* bits in this table */
+          j = i >> (w - l);
+          r.base = (uInt)(q - u[h-1] - j);   /* offset to this table */
+          u[h-1][j] = r;        /* connect to last table */
+        }
+        else
+          *t = q;               /* first table is returned result */
+      }
+
+      /* set up table entry in r */
+      r.bits = (Byte)(k - w);
+      if (p >= v + n)
+        r.exop = 128 + 64;      /* out of values--invalid code */
+      else if (*p < s)
+      {
+        r.exop = (Byte)(*p < 256 ? 0 : 32 + 64);     /* 256 is end-of-block */
+        r.base = *p++;          /* simple code is just the value */
+      }
+      else
+      {
+        r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */
+        r.base = d[*p++ - s];
+      }
+
+      /* fill code-like entries with r */
+      f = 1 << (k - w);
+      for (j = i >> w; j < z; j += f)
+        q[j] = r;
+
+      /* backwards increment the k-bit code i */
+      for (j = 1 << (k - 1); i & j; j >>= 1)
+        i ^= j;
+      i ^= j;
+
+      /* backup over finished tables */
+      mask = (1 << w) - 1;      /* needed on HP, cc -O bug */
+      while ((i & mask) != x[h])
+      {
+        h--;                    /* don't need to update q */
+        w -= l;
+        mask = (1 << w) - 1;
+      }
+    }
+  }
+
+
+  /* Return Z_BUF_ERROR if we were given an incomplete table */
+  return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
+}
+
+
+int inflate_trees_bits(c, bb, tb, hp, z)
+uIntf *c;               /* 19 code lengths */
+uIntf *bb;              /* bits tree desired/actual depth */
+inflate_huft * FAR *tb; /* bits tree result */
+inflate_huft *hp;       /* space for trees */
+z_streamp z;            /* for messages */
+{
+  int r;
+  uInt hn = 0;          /* hufts used in space */
+  uIntf *v;             /* work area for huft_build */
+
+  if ((v = (uIntf*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL)
+    return Z_MEM_ERROR;
+  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL,
+                 tb, bb, hp, &hn, v);
+  if (r == Z_DATA_ERROR)
+    z->msg = (char*)"oversubscribed dynamic bit lengths tree";
+  else if (r == Z_BUF_ERROR || *bb == 0)
+  {
+    z->msg = (char*)"incomplete dynamic bit lengths tree";
+    r = Z_DATA_ERROR;
+  }
+  ZFREE(z, v);
+  return r;
+}
+
+
+int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, hp, z)
+uInt nl;                /* number of literal/length codes */
+uInt nd;                /* number of distance codes */
+uIntf *c;               /* that many (total) code lengths */
+uIntf *bl;              /* literal desired/actual bit depth */
+uIntf *bd;              /* distance desired/actual bit depth */
+inflate_huft * FAR *tl; /* literal/length tree result */
+inflate_huft * FAR *td; /* distance tree result */
+inflate_huft *hp;       /* space for trees */
+z_streamp z;            /* for messages */
+{
+  int r;
+  uInt hn = 0;          /* hufts used in space */
+  uIntf *v;             /* work area for huft_build */
+
+  /* allocate work area */
+  if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
+    return Z_MEM_ERROR;
+
+  /* build literal/length tree */
+  r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v);
+  if (r != Z_OK || *bl == 0)
+  {
+    if (r == Z_DATA_ERROR)
+      z->msg = (char*)"oversubscribed literal/length tree";
+    else if (r != Z_MEM_ERROR)
+    {
+      z->msg = (char*)"incomplete literal/length tree";
+      r = Z_DATA_ERROR;
+    }
+    ZFREE(z, v);
+    return r;
+  }
+
+  /* build distance tree */
+  r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v);
+  if (r != Z_OK || (*bd == 0 && nl > 257))
+  {
+    if (r == Z_DATA_ERROR)
+      z->msg = (char*)"oversubscribed distance tree";
+    else if (r == Z_BUF_ERROR) {
+#ifdef PKZIP_BUG_WORKAROUND
+      r = Z_OK;
+    }
+#else
+      z->msg = (char*)"incomplete distance tree";
+      r = Z_DATA_ERROR;
+    }
+    else if (r != Z_MEM_ERROR)
+    {
+      z->msg = (char*)"empty distance tree with lengths";
+      r = Z_DATA_ERROR;
+    }
+    ZFREE(z, v);
+    return r;
+#endif
+  }
+
+  /* done */
+  ZFREE(z, v);
+  return Z_OK;
+}
+
+
+/* build fixed tables only once--keep them here */
+#ifdef BUILDFIXED
+local int fixed_built = 0;
+#define FIXEDH 544      /* number of hufts used by fixed tables */
+local inflate_huft fixed_mem[FIXEDH];
+local uInt fixed_bl;
+local uInt fixed_bd;
+local inflate_huft *fixed_tl;
+local inflate_huft *fixed_td;
+#else
+#include "inffixed.h"
+#endif
+
+
+int inflate_trees_fixed(bl, bd, tl, td, z)
+uIntf *bl;               /* literal desired/actual bit depth */
+uIntf *bd;               /* distance desired/actual bit depth */
+inflate_huft * FAR *tl;  /* literal/length tree result */
+inflate_huft * FAR *td;  /* distance tree result */
+z_streamp z;             /* for memory allocation */
+{
+#ifdef BUILDFIXED
+  /* build fixed tables if not already */
+  if (!fixed_built)
+  {
+    int k;              /* temporary variable */
+    uInt f = 0;         /* number of hufts used in fixed_mem */
+    uIntf *c;           /* length list for huft_build */
+    uIntf *v;           /* work area for huft_build */
+
+    /* allocate memory */
+    if ((c = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
+      return Z_MEM_ERROR;
+    if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
+    {
+      ZFREE(z, c);
+      return Z_MEM_ERROR;
+    }
+
+    /* literal table */
+    for (k = 0; k < 144; k++)
+      c[k] = 8;
+    for (; k < 256; k++)
+      c[k] = 9;
+    for (; k < 280; k++)
+      c[k] = 7;
+    for (; k < 288; k++)
+      c[k] = 8;
+    fixed_bl = 9;
+    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl,
+               fixed_mem, &f, v);
+
+    /* distance table */
+    for (k = 0; k < 30; k++)
+      c[k] = 5;
+    fixed_bd = 5;
+    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd,
+               fixed_mem, &f, v);
+
+    /* done */
+    ZFREE(z, v);
+    ZFREE(z, c);
+    fixed_built = 1;
+  }
+#endif
+  *bl = fixed_bl;
+  *bd = fixed_bd;
+  *tl = fixed_tl;
+  *td = fixed_td;
+  return Z_OK;
+}
diff --git a/nx-X11/extras/zlib/inftrees.h b/nx-X11/extras/zlib/inftrees.h
new file mode 100644
index 000000000..04b73b729
--- /dev/null
+++ b/nx-X11/extras/zlib/inftrees.h
@@ -0,0 +1,58 @@
+/* inftrees.h -- header to use inftrees.c
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* Huffman code lookup table entry--this entry is four bytes for machines
+   that have 16-bit pointers (e.g. PC's in the small or medium model). */
+
+typedef struct inflate_huft_s FAR inflate_huft;
+
+struct inflate_huft_s {
+  union {
+    struct {
+      Byte Exop;        /* number of extra bits or operation */
+      Byte Bits;        /* number of bits in this code or subcode */
+    } what;
+    uInt pad;           /* pad structure to a power of 2 (4 bytes for */
+  } word;               /*  16-bit, 8 bytes for 32-bit int's) */
+  uInt base;            /* literal, length base, distance base,
+                           or table offset */
+};
+
+/* Maximum size of dynamic tree.  The maximum found in a long but non-
+   exhaustive search was 1004 huft structures (850 for length/literals
+   and 154 for distances, the latter actually the result of an
+   exhaustive search).  The actual maximum is not known, but the
+   value below is more than safe. */
+#define MANY 1440
+
+extern int inflate_trees_bits OF((
+    uIntf *,                    /* 19 code lengths */
+    uIntf *,                    /* bits tree desired/actual depth */
+    inflate_huft * FAR *,       /* bits tree result */
+    inflate_huft *,             /* space for trees */
+    z_streamp));                /* for messages */
+
+extern int inflate_trees_dynamic OF((
+    uInt,                       /* number of literal/length codes */
+    uInt,                       /* number of distance codes */
+    uIntf *,                    /* that many (total) code lengths */
+    uIntf *,                    /* literal desired/actual bit depth */
+    uIntf *,                    /* distance desired/actual bit depth */
+    inflate_huft * FAR *,       /* literal/length tree result */
+    inflate_huft * FAR *,       /* distance tree result */
+    inflate_huft *,             /* space for trees */
+    z_streamp));                /* for messages */
+
+extern int inflate_trees_fixed OF((
+    uIntf *,                    /* literal desired/actual bit depth */
+    uIntf *,                    /* distance desired/actual bit depth */
+    inflate_huft * FAR *,       /* literal/length tree result */
+    inflate_huft * FAR *,       /* distance tree result */
+    z_streamp));                /* for memory allocation */
diff --git a/nx-X11/extras/zlib/infutil.c b/nx-X11/extras/zlib/infutil.c
new file mode 100644
index 000000000..9a076221f
--- /dev/null
+++ b/nx-X11/extras/zlib/infutil.c
@@ -0,0 +1,87 @@
+/* inflate_util.c -- data and routines common to blocks and codes
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+#include "zutil.h"
+#include "infblock.h"
+#include "inftrees.h"
+#include "infcodes.h"
+#include "infutil.h"
+
+struct inflate_codes_state {int dummy;}; /* for buggy compilers */
+
+/* And'ing with mask[n] masks the lower n bits */
+uInt inflate_mask[17] = {
+    0x0000,
+    0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
+    0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
+};
+
+
+/* copy as much as possible from the sliding window to the output area */
+int inflate_flush(s, z, r)
+inflate_blocks_statef *s;
+z_streamp z;
+int r;
+{
+  uInt n;
+  Bytef *p;
+  Bytef *q;
+
+  /* local copies of source and destination pointers */
+  p = z->next_out;
+  q = s->read;
+
+  /* compute number of bytes to copy as far as end of window */
+  n = (uInt)((q <= s->write ? s->write : s->end) - q);
+  if (n > z->avail_out) n = z->avail_out;
+  if (n && r == Z_BUF_ERROR) r = Z_OK;
+
+  /* update counters */
+  z->avail_out -= n;
+  z->total_out += n;
+
+  /* update check information */
+  if (s->checkfn != Z_NULL)
+    z->adler = s->check = (*s->checkfn)(s->check, q, n);
+
+  /* copy as far as end of window */
+  zmemcpy(p, q, n);
+  p += n;
+  q += n;
+
+  /* see if more to copy at beginning of window */
+  if (q == s->end)
+  {
+    /* wrap pointers */
+    q = s->window;
+    if (s->write == s->end)
+      s->write = s->window;
+
+    /* compute bytes to copy */
+    n = (uInt)(s->write - q);
+    if (n > z->avail_out) n = z->avail_out;
+    if (n && r == Z_BUF_ERROR) r = Z_OK;
+
+    /* update counters */
+    z->avail_out -= n;
+    z->total_out += n;
+
+    /* update check information */
+    if (s->checkfn != Z_NULL)
+      z->adler = s->check = (*s->checkfn)(s->check, q, n);
+
+    /* copy */
+    zmemcpy(p, q, n);
+    p += n;
+    q += n;
+  }
+
+  /* update pointers */
+  z->next_out = p;
+  s->read = q;
+
+  /* done */
+  return r;
+}
diff --git a/nx-X11/extras/zlib/infutil.h b/nx-X11/extras/zlib/infutil.h
new file mode 100644
index 000000000..4401df82f
--- /dev/null
+++ b/nx-X11/extras/zlib/infutil.h
@@ -0,0 +1,98 @@
+/* infutil.h -- types and macros common to blocks and codes
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+#ifndef _INFUTIL_H
+#define _INFUTIL_H
+
+typedef enum {
+      TYPE,     /* get type bits (3, including end bit) */
+      LENS,     /* get lengths for stored */
+      STORED,   /* processing stored block */
+      TABLE,    /* get table lengths */
+      BTREE,    /* get bit lengths tree for a dynamic block */
+      DTREE,    /* get length, distance trees for a dynamic block */
+      CODES,    /* processing fixed or dynamic block */
+      DRY,      /* output remaining window bytes */
+      DONE,     /* finished last block, done */
+      BAD}      /* got a data error--stuck here */
+inflate_block_mode;
+
+/* inflate blocks semi-private state */
+struct inflate_blocks_state {
+
+  /* mode */
+  inflate_block_mode  mode;     /* current inflate_block mode */
+
+  /* mode dependent information */
+  union {
+    uInt left;          /* if STORED, bytes left to copy */
+    struct {
+      uInt table;               /* table lengths (14 bits) */
+      uInt index;               /* index into blens (or border) */
+      uIntf *blens;             /* bit lengths of codes */
+      uInt bb;                  /* bit length tree depth */
+      inflate_huft *tb;         /* bit length decoding tree */
+    } trees;            /* if DTREE, decoding info for trees */
+    struct {
+      inflate_codes_statef 
+         *codes;
+    } decode;           /* if CODES, current state */
+  } sub;                /* submode */
+  uInt last;            /* true if this block is the last block */
+
+  /* mode independent information */
+  uInt bitk;            /* bits in bit buffer */
+  uLong bitb;           /* bit buffer */
+  inflate_huft *hufts;  /* single malloc for tree space */
+  Bytef *window;        /* sliding window */
+  Bytef *end;           /* one byte after sliding window */
+  Bytef *read;          /* window read pointer */
+  Bytef *write;         /* window write pointer */
+  check_func checkfn;   /* check function */
+  uLong check;          /* check on output */
+
+};
+
+
+/* defines for inflate input/output */
+/*   update pointers and return */
+#define UPDBITS {s->bitb=b;s->bitk=k;}
+#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
+#define UPDOUT {s->write=q;}
+#define UPDATE {UPDBITS UPDIN UPDOUT}
+#define LEAVE {UPDATE return inflate_flush(s,z,r);}
+/*   get bytes and bits */
+#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
+#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
+#define NEXTBYTE (n--,*p++)
+#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
+#define DUMPBITS(j) {b>>=(j);k-=(j);}
+/*   output bytes */
+#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q)
+#define LOADOUT {q=s->write;m=(uInt)WAVAIL;}
+#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}
+#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
+#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
+#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
+/*   load local pointers */
+#define LOAD {LOADIN LOADOUT}
+
+/* masks for lower bits (size given to avoid silly warnings with Visual C++) */
+extern uInt inflate_mask[17];
+
+/* copy as much as possible from the sliding window to the output area */
+extern int inflate_flush OF((
+    inflate_blocks_statef *,
+    z_streamp ,
+    int));
+
+struct internal_state      {int dummy;}; /* for buggy compilers */
+
+#endif
diff --git a/nx-X11/extras/zlib/maketree.c b/nx-X11/extras/zlib/maketree.c
new file mode 100644
index 000000000..a16d4b146
--- /dev/null
+++ b/nx-X11/extras/zlib/maketree.c
@@ -0,0 +1,85 @@
+/* maketree.c -- make inffixed.h table for decoding fixed codes
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* This program is included in the distribution for completeness.
+   You do not need to compile or run this program since inffixed.h
+   is already included in the distribution.  To use this program
+   you need to compile zlib with BUILDFIXED defined and then compile
+   and link this program with the zlib library.  Then the output of
+   this program can be piped to inffixed.h. */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "zutil.h"
+#include "inftrees.h"
+
+/* simplify the use of the inflate_huft type with some defines */
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+/* generate initialization table for an inflate_huft structure array */
+void maketree(uInt b, inflate_huft *t)
+{
+  int i, e;
+
+  i = 0;
+  while (1)
+  {
+    e = t[i].exop;
+    if (e && (e & (16+64)) == 0)        /* table pointer */
+    {
+      fprintf(stderr, "maketree: cannot initialize sub-tables!\n");
+      exit(1);
+    }
+    if (i % 4 == 0)
+      printf("\n   ");
+    printf(" {{{%u,%u}},%u}", t[i].exop, t[i].bits, t[i].base);
+    if (++i == (1<<b))
+      break;
+    putchar(',');
+  }
+  puts("");
+}
+
+/* create the fixed tables in C initialization syntax */
+void main(void)
+{
+  int r;
+  uInt bl, bd;
+  inflate_huft *tl, *td;
+  z_stream z;
+
+  z.zalloc = zcalloc;
+  z.opaque = (voidpf)0;
+  z.zfree = zcfree;
+  r = inflate_trees_fixed(&bl, &bd, &tl, &td, &z);
+  if (r)
+  {
+    fprintf(stderr, "inflate_trees_fixed error %d\n", r);
+    return;
+  }
+  puts("/* inffixed.h -- table for decoding fixed codes");
+  puts(" * Generated automatically by the maketree.c program");
+  puts(" */");
+  puts("");
+  puts("/* WARNING: this file should *not* be used by applications. It is");
+  puts("   part of the implementation of the compression library and is");
+  puts("   subject to change. Applications should only use zlib.h.");
+  puts(" */");
+  puts("");
+  printf("local uInt fixed_bl = %d;\n", bl);
+  printf("local uInt fixed_bd = %d;\n", bd);
+  printf("local inflate_huft fixed_tl[] = {");
+  maketree(bl, tl);
+  puts("  };");
+  printf("local inflate_huft fixed_td[] = {");
+  maketree(bd, td);
+  puts("  };");
+}
diff --git a/nx-X11/extras/zlib/minigzip.c b/nx-X11/extras/zlib/minigzip.c
new file mode 100644
index 000000000..d7a0016e6
--- /dev/null
+++ b/nx-X11/extras/zlib/minigzip.c
@@ -0,0 +1,320 @@
+/* minigzip.c -- simulate gzip using the zlib compression library
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/*
+ * minigzip is a minimal implementation of the gzip utility. This is
+ * only an example of using zlib and isn't meant to replace the
+ * full-featured gzip. No attempt is made to deal with file systems
+ * limiting names to 14 or 8+3 characters, etc... Error checking is
+ * very limited. So use minigzip only for testing; use gzip for the
+ * real thing. On MSDOS, use only on file names without extension
+ * or in pipe mode.
+ */
+
+/* @(#) $Id: minigzip.c,v 1.1.1.3 2004/03/14 08:29:15 eich Exp $ */
+
+#include <stdio.h>
+#include "zlib.h"
+
+#ifdef STDC
+#  include <string.h>
+#  include <stdlib.h>
+#else
+   extern void exit  OF((int));
+#endif
+
+#ifdef USE_MMAP
+#  include <sys/types.h>
+#  include <sys/mman.h>
+#  include <sys/stat.h>
+#endif
+
+#if defined(MSDOS) || defined(OS2) || defined(WIN32)
+#  include <fcntl.h>
+#  include <io.h>
+#  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+#  define SET_BINARY_MODE(file)
+#endif
+
+#ifdef VMS
+#  define unlink delete
+#  define GZ_SUFFIX "-gz"
+#endif
+#ifdef RISCOS
+#  define unlink remove
+#  define GZ_SUFFIX "-gz"
+#  define fileno(file) file->__file
+#endif
+#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+#  include <unix.h> /* for fileno */
+#endif
+
+#ifndef WIN32 /* unlink already in stdio.h for WIN32 */
+  extern int unlink OF((const char *));
+#endif
+
+#ifndef GZ_SUFFIX
+#  define GZ_SUFFIX ".gz"
+#endif
+#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
+
+#define BUFLEN      16384
+#define MAX_NAME_LEN 1024
+
+#ifdef MAXSEG_64K
+#  define local static
+   /* Needed for systems with limitation on stack size. */
+#else
+#  define local
+#endif
+
+char *prog;
+
+void error            OF((const char *msg));
+void gz_compress      OF((FILE   *in, gzFile out));
+#ifdef USE_MMAP
+int  gz_compress_mmap OF((FILE   *in, gzFile out));
+#endif
+void gz_uncompress    OF((gzFile in, FILE   *out));
+void file_compress    OF((char  *file, char *mode));
+void file_uncompress  OF((char  *file));
+int  main             OF((int argc, char *argv[]));
+
+/* ===========================================================================
+ * Display error message and exit
+ */
+void error(msg)
+    const char *msg;
+{
+    fprintf(stderr, "%s: %s\n", prog, msg);
+    exit(1);
+}
+
+/* ===========================================================================
+ * Compress input to output then close both files.
+ */
+
+void gz_compress(in, out)
+    FILE   *in;
+    gzFile out;
+{
+    local char buf[BUFLEN];
+    int len;
+    int err;
+
+#ifdef USE_MMAP
+    /* Try first compressing with mmap. If mmap fails (minigzip used in a
+     * pipe), use the normal fread loop.
+     */
+    if (gz_compress_mmap(in, out) == Z_OK) return;
+#endif
+    for (;;) {
+        len = fread(buf, 1, sizeof(buf), in);
+        if (ferror(in)) {
+            perror("fread");
+            exit(1);
+        }
+        if (len == 0) break;
+
+        if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
+    }
+    fclose(in);
+    if (gzclose(out) != Z_OK) error("failed gzclose");
+}
+
+#ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
+
+/* Try compressing the input file at once using mmap. Return Z_OK if
+ * if success, Z_ERRNO otherwise.
+ */
+int gz_compress_mmap(in, out)
+    FILE   *in;
+    gzFile out;
+{
+    int len;
+    int err;
+    int ifd = fileno(in);
+    caddr_t buf;    /* mmap'ed buffer for the entire input file */
+    off_t buf_len;  /* length of the input file */
+    struct stat sb;
+
+    /* Determine the size of the file, needed for mmap: */
+    if (fstat(ifd, &sb) < 0) return Z_ERRNO;
+    buf_len = sb.st_size;
+    if (buf_len <= 0) return Z_ERRNO;
+
+    /* Now do the actual mmap: */
+    buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0); 
+    if (buf == (caddr_t)(-1)) return Z_ERRNO;
+
+    /* Compress the whole file at once: */
+    len = gzwrite(out, (char *)buf, (unsigned)buf_len);
+
+    if (len != (int)buf_len) error(gzerror(out, &err));
+
+    munmap(buf, buf_len);
+    fclose(in);
+    if (gzclose(out) != Z_OK) error("failed gzclose");
+    return Z_OK;
+}
+#endif /* USE_MMAP */
+
+/* ===========================================================================
+ * Uncompress input to output then close both files.
+ */
+void gz_uncompress(in, out)
+    gzFile in;
+    FILE   *out;
+{
+    local char buf[BUFLEN];
+    int len;
+    int err;
+
+    for (;;) {
+        len = gzread(in, buf, sizeof(buf));
+        if (len < 0) error (gzerror(in, &err));
+        if (len == 0) break;
+
+        if ((int)fwrite(buf, 1, (unsigned)len, out) != len) {
+	    error("failed fwrite");
+	}
+    }
+    if (fclose(out)) error("failed fclose");
+
+    if (gzclose(in) != Z_OK) error("failed gzclose");
+}
+
+
+/* ===========================================================================
+ * Compress the given file: create a corresponding .gz file and remove the
+ * original.
+ */
+void file_compress(file, mode)
+    char  *file;
+    char  *mode;
+{
+    local char outfile[MAX_NAME_LEN];
+    FILE  *in;
+    gzFile out;
+
+    strcpy(outfile, file);
+    strcat(outfile, GZ_SUFFIX);
+
+    in = fopen(file, "rb");
+    if (in == NULL) {
+        perror(file);
+        exit(1);
+    }
+    out = gzopen(outfile, mode);
+    if (out == NULL) {
+        fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
+        exit(1);
+    }
+    gz_compress(in, out);
+
+    unlink(file);
+}
+
+
+/* ===========================================================================
+ * Uncompress the given file and remove the original.
+ */
+void file_uncompress(file)
+    char  *file;
+{
+    local char buf[MAX_NAME_LEN];
+    char *infile, *outfile;
+    FILE  *out;
+    gzFile in;
+    int len = strlen(file);
+
+    strcpy(buf, file);
+
+    if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) {
+        infile = file;
+        outfile = buf;
+        outfile[len-3] = '\0';
+    } else {
+        outfile = file;
+        infile = buf;
+        strcat(infile, GZ_SUFFIX);
+    }
+    in = gzopen(infile, "rb");
+    if (in == NULL) {
+        fprintf(stderr, "%s: can't gzopen %s\n", prog, infile);
+        exit(1);
+    }
+    out = fopen(outfile, "wb");
+    if (out == NULL) {
+        perror(file);
+        exit(1);
+    }
+
+    gz_uncompress(in, out);
+
+    unlink(infile);
+}
+
+
+/* ===========================================================================
+ * Usage:  minigzip [-d] [-f] [-h] [-1 to -9] [files...]
+ *   -d : decompress
+ *   -f : compress with Z_FILTERED
+ *   -h : compress with Z_HUFFMAN_ONLY
+ *   -1 to -9 : compression level
+ */
+
+int main(argc, argv)
+    int argc;
+    char *argv[];
+{
+    int uncompr = 0;
+    gzFile file;
+    char outmode[20];
+
+    strcpy(outmode, "wb6 ");
+
+    prog = argv[0];
+    argc--, argv++;
+
+    while (argc > 0) {
+      if (strcmp(*argv, "-d") == 0)
+	uncompr = 1;
+      else if (strcmp(*argv, "-f") == 0)
+	outmode[3] = 'f';
+      else if (strcmp(*argv, "-h") == 0)
+	outmode[3] = 'h';
+      else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' &&
+	       (*argv)[2] == 0)
+	outmode[2] = (*argv)[1];
+      else
+	break;
+      argc--, argv++;
+    }
+    if (argc == 0) {
+        SET_BINARY_MODE(stdin);
+        SET_BINARY_MODE(stdout);
+        if (uncompr) {
+            file = gzdopen(fileno(stdin), "rb");
+            if (file == NULL) error("can't gzdopen stdin");
+            gz_uncompress(file, stdout);
+        } else {
+            file = gzdopen(fileno(stdout), outmode);
+            if (file == NULL) error("can't gzdopen stdout");
+            gz_compress(stdin, file);
+        }
+    } else {
+        do {
+            if (uncompr) {
+                file_uncompress(*argv);
+            } else {
+                file_compress(*argv, outmode);
+            }
+        } while (argv++, --argc);
+    }
+    exit(0);
+    return 0; /* to avoid warning */
+}
diff --git a/nx-X11/extras/zlib/trees.c b/nx-X11/extras/zlib/trees.c
new file mode 100644
index 000000000..ae44068d7
--- /dev/null
+++ b/nx-X11/extras/zlib/trees.c
@@ -0,0 +1,1212 @@
+/* trees.c -- output deflated data using Huffman coding
+ * Copyright (C) 1995-2002 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/*
+ *  ALGORITHM
+ *
+ *      The "deflation" process uses several Huffman trees. The more
+ *      common source values are represented by shorter bit sequences.
+ *
+ *      Each code tree is stored in a compressed form which is itself
+ * a Huffman encoding of the lengths of all the code strings (in
+ * ascending order by source values).  The actual code strings are
+ * reconstructed from the lengths in the inflate process, as described
+ * in the deflate specification.
+ *
+ *  REFERENCES
+ *
+ *      Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
+ *      Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
+ *
+ *      Storer, James A.
+ *          Data Compression:  Methods and Theory, pp. 49-50.
+ *          Computer Science Press, 1988.  ISBN 0-7167-8156-5.
+ *
+ *      Sedgewick, R.
+ *          Algorithms, p290.
+ *          Addison-Wesley, 1983. ISBN 0-201-06672-6.
+ */
+
+/* #define GEN_TREES_H */
+
+#include "deflate.h"
+
+#ifdef DEBUG
+#  include <ctype.h>
+#endif
+
+/* ===========================================================================
+ * Constants
+ */
+
+#define MAX_BL_BITS 7
+/* Bit length codes must not exceed MAX_BL_BITS bits */
+
+#define END_BLOCK 256
+/* end of block literal code */
+
+#define REP_3_6      16
+/* repeat previous bit length 3-6 times (2 bits of repeat count) */
+
+#define REPZ_3_10    17
+/* repeat a zero length 3-10 times  (3 bits of repeat count) */
+
+#define REPZ_11_138  18
+/* repeat a zero length 11-138 times  (7 bits of repeat count) */
+
+local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
+   = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
+
+local const int extra_dbits[D_CODES] /* extra bits for each distance code */
+   = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
+
+local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */
+   = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
+
+local const uch bl_order[BL_CODES]
+   = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
+/* The lengths of the bit length codes are sent in order of decreasing
+ * probability, to avoid transmitting the lengths for unused bit length codes.
+ */
+
+#define Buf_size (8 * 2*sizeof(char))
+/* Number of bits used within bi_buf. (bi_buf might be implemented on
+ * more than 16 bits on some systems.)
+ */
+
+/* ===========================================================================
+ * Local data. These are initialized only once.
+ */
+
+#define DIST_CODE_LEN  512 /* see definition of array dist_code below */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+/* non ANSI compilers may not accept trees.h */
+
+local ct_data static_ltree[L_CODES+2];
+/* The static literal tree. Since the bit lengths are imposed, there is no
+ * need for the L_CODES extra codes used during heap construction. However
+ * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
+ * below).
+ */
+
+local ct_data static_dtree[D_CODES];
+/* The static distance tree. (Actually a trivial tree since all codes use
+ * 5 bits.)
+ */
+
+uch _dist_code[DIST_CODE_LEN];
+/* Distance codes. The first 256 values correspond to the distances
+ * 3 .. 258, the last 256 values correspond to the top 8 bits of
+ * the 15 bit distances.
+ */
+
+uch _length_code[MAX_MATCH-MIN_MATCH+1];
+/* length code for each normalized match length (0 == MIN_MATCH) */
+
+local int base_length[LENGTH_CODES];
+/* First normalized length for each code (0 = MIN_MATCH) */
+
+local int base_dist[D_CODES];
+/* First normalized distance for each code (0 = distance of 1) */
+
+#else
+#  include "trees.h"
+#endif /* GEN_TREES_H */
+
+struct static_tree_desc_s {
+    const ct_data *static_tree;  /* static tree or NULL */
+    const intf *extra_bits;      /* extra bits for each code or NULL */
+    int     extra_base;          /* base index for extra_bits */
+    int     elems;               /* max number of elements in the tree */
+    int     max_length;          /* max bit length for the codes */
+};
+
+local static_tree_desc  static_l_desc =
+{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
+
+local static_tree_desc  static_d_desc =
+{static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
+
+local static_tree_desc  static_bl_desc =
+{(const ct_data *)0, extra_blbits, 0,   BL_CODES, MAX_BL_BITS};
+
+/* ===========================================================================
+ * Local (static) routines in this file.
+ */
+
+local void tr_static_init OF((void));
+local void init_block     OF((deflate_state *s));
+local void pqdownheap     OF((deflate_state *s, ct_data *tree, int k));
+local void gen_bitlen     OF((deflate_state *s, tree_desc *desc));
+local void gen_codes      OF((ct_data *tree, int max_code, ushf *bl_count));
+local void build_tree     OF((deflate_state *s, tree_desc *desc));
+local void scan_tree      OF((deflate_state *s, ct_data *tree, int max_code));
+local void send_tree      OF((deflate_state *s, ct_data *tree, int max_code));
+local int  build_bl_tree  OF((deflate_state *s));
+local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
+                              int blcodes));
+local void compress_block OF((deflate_state *s, ct_data *ltree,
+                              ct_data *dtree));
+local void set_data_type  OF((deflate_state *s));
+local unsigned bi_reverse OF((unsigned value, int length));
+local void bi_windup      OF((deflate_state *s));
+local void bi_flush       OF((deflate_state *s));
+local void copy_block     OF((deflate_state *s, charf *buf, unsigned len,
+                              int header));
+
+#ifdef GEN_TREES_H
+local void gen_trees_header OF((void));
+#endif
+
+#ifndef DEBUG
+#  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
+   /* Send a code of the given tree. c and tree must not have side effects */
+
+#else /* DEBUG */
+#  define send_code(s, c, tree) \
+     { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
+       send_bits(s, tree[c].Code, tree[c].Len); }
+#endif
+
+/* ===========================================================================
+ * Output a short LSB first on the stream.
+ * IN assertion: there is enough room in pendingBuf.
+ */
+#define put_short(s, w) { \
+    put_byte(s, (uch)((w) & 0xff)); \
+    put_byte(s, (uch)((ush)(w) >> 8)); \
+}
+
+/* ===========================================================================
+ * Send a value on a given number of bits.
+ * IN assertion: length <= 16 and value fits in length bits.
+ */
+#ifdef DEBUG
+local void send_bits      OF((deflate_state *s, int value, int length));
+
+local void send_bits(s, value, length)
+    deflate_state *s;
+    int value;  /* value to send */
+    int length; /* number of bits */
+{
+    Tracevv((stderr," l %2d v %4x ", length, value));
+    Assert(length > 0 && length <= 15, "invalid length");
+    s->bits_sent += (ulg)length;
+
+    /* If not enough room in bi_buf, use (valid) bits from bi_buf and
+     * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
+     * unused bits in value.
+     */
+    if (s->bi_valid > (int)Buf_size - length) {
+        s->bi_buf |= (value << s->bi_valid);
+        put_short(s, s->bi_buf);
+        s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
+        s->bi_valid += length - Buf_size;
+    } else {
+        s->bi_buf |= value << s->bi_valid;
+        s->bi_valid += length;
+    }
+}
+#else /* !DEBUG */
+
+#define send_bits(s, value, length) \
+{ int len = length;\
+  if (s->bi_valid > (int)Buf_size - len) {\
+    int val = value;\
+    s->bi_buf |= (val << s->bi_valid);\
+    put_short(s, s->bi_buf);\
+    s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
+    s->bi_valid += len - Buf_size;\
+  } else {\
+    s->bi_buf |= (value) << s->bi_valid;\
+    s->bi_valid += len;\
+  }\
+}
+#endif /* DEBUG */
+
+
+#define MAX(a,b) (a >= b ? a : b)
+/* the arguments must not have side effects */
+
+/* ===========================================================================
+ * Initialize the various 'constant' tables.
+ */
+local void tr_static_init()
+{
+#if defined(GEN_TREES_H) || !defined(STDC)
+    static int static_init_done = 0;
+    int n;        /* iterates over tree elements */
+    int bits;     /* bit counter */
+    int length;   /* length value */
+    int code;     /* code value */
+    int dist;     /* distance index */
+    ush bl_count[MAX_BITS+1];
+    /* number of codes at each bit length for an optimal tree */
+
+    if (static_init_done) return;
+
+    /* For some embedded targets, global variables are not initialized: */
+    static_l_desc.static_tree = static_ltree;
+    static_l_desc.extra_bits = extra_lbits;
+    static_d_desc.static_tree = static_dtree;
+    static_d_desc.extra_bits = extra_dbits;
+    static_bl_desc.extra_bits = extra_blbits;
+
+    /* Initialize the mapping length (0..255) -> length code (0..28) */
+    length = 0;
+    for (code = 0; code < LENGTH_CODES-1; code++) {
+        base_length[code] = length;
+        for (n = 0; n < (1<<extra_lbits[code]); n++) {
+            _length_code[length++] = (uch)code;
+        }
+    }
+    Assert (length == 256, "tr_static_init: length != 256");
+    /* Note that the length 255 (match length 258) can be represented
+     * in two different ways: code 284 + 5 bits or code 285, so we
+     * overwrite length_code[255] to use the best encoding:
+     */
+    _length_code[length-1] = (uch)code;
+
+    /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
+    dist = 0;
+    for (code = 0 ; code < 16; code++) {
+        base_dist[code] = dist;
+        for (n = 0; n < (1<<extra_dbits[code]); n++) {
+            _dist_code[dist++] = (uch)code;
+        }
+    }
+    Assert (dist == 256, "tr_static_init: dist != 256");
+    dist >>= 7; /* from now on, all distances are divided by 128 */
+    for ( ; code < D_CODES; code++) {
+        base_dist[code] = dist << 7;
+        for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
+            _dist_code[256 + dist++] = (uch)code;
+        }
+    }
+    Assert (dist == 256, "tr_static_init: 256+dist != 512");
+
+    /* Construct the codes of the static literal tree */
+    for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
+    n = 0;
+    while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
+    while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
+    while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
+    while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
+    /* Codes 286 and 287 do not exist, but we must include them in the
+     * tree construction to get a canonical Huffman tree (longest code
+     * all ones)
+     */
+    gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
+
+    /* The static distance tree is trivial: */
+    for (n = 0; n < D_CODES; n++) {
+        static_dtree[n].Len = 5;
+        static_dtree[n].Code = bi_reverse((unsigned)n, 5);
+    }
+    static_init_done = 1;
+
+#  ifdef GEN_TREES_H
+    gen_trees_header();
+#  endif
+#endif /* defined(GEN_TREES_H) || !defined(STDC) */
+}
+
+/* ===========================================================================
+ * Genererate the file trees.h describing the static trees.
+ */
+#ifdef GEN_TREES_H
+#  ifndef DEBUG
+#    include <stdio.h>
+#  endif
+
+#  define SEPARATOR(i, last, width) \
+      ((i) == (last)? "\n};\n\n" :    \
+       ((i) % (width) == (width)-1 ? ",\n" : ", "))
+
+void gen_trees_header()
+{
+    FILE *header = fopen("trees.h", "w");
+    int i;
+
+    Assert (header != NULL, "Can't open trees.h");
+    fprintf(header,
+	    "/* header created automatically with -DGEN_TREES_H */\n\n");
+
+    fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n");
+    for (i = 0; i < L_CODES+2; i++) {
+	fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
+		static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
+    }
+
+    fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n");
+    for (i = 0; i < D_CODES; i++) {
+	fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
+		static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
+    }
+
+    fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n");
+    for (i = 0; i < DIST_CODE_LEN; i++) {
+	fprintf(header, "%2u%s", _dist_code[i],
+		SEPARATOR(i, DIST_CODE_LEN-1, 20));
+    }
+
+    fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
+    for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
+	fprintf(header, "%2u%s", _length_code[i],
+		SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
+    }
+
+    fprintf(header, "local const int base_length[LENGTH_CODES] = {\n");
+    for (i = 0; i < LENGTH_CODES; i++) {
+	fprintf(header, "%1u%s", base_length[i],
+		SEPARATOR(i, LENGTH_CODES-1, 20));
+    }
+
+    fprintf(header, "local const int base_dist[D_CODES] = {\n");
+    for (i = 0; i < D_CODES; i++) {
+	fprintf(header, "%5u%s", base_dist[i],
+		SEPARATOR(i, D_CODES-1, 10));
+    }
+
+    fclose(header);
+}
+#endif /* GEN_TREES_H */
+
+/* ===========================================================================
+ * Initialize the tree data structures for a new zlib stream.
+ */
+void _tr_init(s)
+    deflate_state *s;
+{
+    tr_static_init();
+
+    s->l_desc.dyn_tree = s->dyn_ltree;
+    s->l_desc.stat_desc = &static_l_desc;
+
+    s->d_desc.dyn_tree = s->dyn_dtree;
+    s->d_desc.stat_desc = &static_d_desc;
+
+    s->bl_desc.dyn_tree = s->bl_tree;
+    s->bl_desc.stat_desc = &static_bl_desc;
+
+    s->bi_buf = 0;
+    s->bi_valid = 0;
+    s->last_eob_len = 8; /* enough lookahead for inflate */
+#ifdef DEBUG
+    s->compressed_len = 0L;
+    s->bits_sent = 0L;
+#endif
+
+    /* Initialize the first block of the first file: */
+    init_block(s);
+}
+
+/* ===========================================================================
+ * Initialize a new block.
+ */
+local void init_block(s)
+    deflate_state *s;
+{
+    int n; /* iterates over tree elements */
+
+    /* Initialize the trees. */
+    for (n = 0; n < L_CODES;  n++) s->dyn_ltree[n].Freq = 0;
+    for (n = 0; n < D_CODES;  n++) s->dyn_dtree[n].Freq = 0;
+    for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
+
+    s->dyn_ltree[END_BLOCK].Freq = 1;
+    s->opt_len = s->static_len = 0L;
+    s->last_lit = s->matches = 0;
+}
+
+#define SMALLEST 1
+/* Index within the heap array of least frequent node in the Huffman tree */
+
+
+/* ===========================================================================
+ * Remove the smallest element from the heap and recreate the heap with
+ * one less element. Updates heap and heap_len.
+ */
+#define pqremove(s, tree, top) \
+{\
+    top = s->heap[SMALLEST]; \
+    s->heap[SMALLEST] = s->heap[s->heap_len--]; \
+    pqdownheap(s, tree, SMALLEST); \
+}
+
+/* ===========================================================================
+ * Compares to subtrees, using the tree depth as tie breaker when
+ * the subtrees have equal frequency. This minimizes the worst case length.
+ */
+#define smaller(tree, n, m, depth) \
+   (tree[n].Freq < tree[m].Freq || \
+   (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
+
+/* ===========================================================================
+ * Restore the heap property by moving down the tree starting at node k,
+ * exchanging a node with the smallest of its two sons if necessary, stopping
+ * when the heap property is re-established (each father smaller than its
+ * two sons).
+ */
+local void pqdownheap(s, tree, k)
+    deflate_state *s;
+    ct_data *tree;  /* the tree to restore */
+    int k;               /* node to move down */
+{
+    int v = s->heap[k];
+    int j = k << 1;  /* left son of k */
+    while (j <= s->heap_len) {
+        /* Set j to the smallest of the two sons: */
+        if (j < s->heap_len &&
+            smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
+            j++;
+        }
+        /* Exit if v is smaller than both sons */
+        if (smaller(tree, v, s->heap[j], s->depth)) break;
+
+        /* Exchange v with the smallest son */
+        s->heap[k] = s->heap[j];  k = j;
+
+        /* And continue down the tree, setting j to the left son of k */
+        j <<= 1;
+    }
+    s->heap[k] = v;
+}
+
+/* ===========================================================================
+ * Compute the optimal bit lengths for a tree and update the total bit length
+ * for the current block.
+ * IN assertion: the fields freq and dad are set, heap[heap_max] and
+ *    above are the tree nodes sorted by increasing frequency.
+ * OUT assertions: the field len is set to the optimal bit length, the
+ *     array bl_count contains the frequencies for each bit length.
+ *     The length opt_len is updated; static_len is also updated if stree is
+ *     not null.
+ */
+local void gen_bitlen(s, desc)
+    deflate_state *s;
+    tree_desc *desc;    /* the tree descriptor */
+{
+    ct_data *tree        = desc->dyn_tree;
+    int max_code         = desc->max_code;
+    const ct_data *stree = desc->stat_desc->static_tree;
+    const intf *extra    = desc->stat_desc->extra_bits;
+    int base             = desc->stat_desc->extra_base;
+    int max_length       = desc->stat_desc->max_length;
+    int h;              /* heap index */
+    int n, m;           /* iterate over the tree elements */
+    int bits;           /* bit length */
+    int xbits;          /* extra bits */
+    ush f;              /* frequency */
+    int overflow = 0;   /* number of elements with bit length too large */
+
+    for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
+
+    /* In a first pass, compute the optimal bit lengths (which may
+     * overflow in the case of the bit length tree).
+     */
+    tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
+
+    for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
+        n = s->heap[h];
+        bits = tree[tree[n].Dad].Len + 1;
+        if (bits > max_length) bits = max_length, overflow++;
+        tree[n].Len = (ush)bits;
+        /* We overwrite tree[n].Dad which is no longer needed */
+
+        if (n > max_code) continue; /* not a leaf node */
+
+        s->bl_count[bits]++;
+        xbits = 0;
+        if (n >= base) xbits = extra[n-base];
+        f = tree[n].Freq;
+        s->opt_len += (ulg)f * (bits + xbits);
+        if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
+    }
+    if (overflow == 0) return;
+
+    Trace((stderr,"\nbit length overflow\n"));
+    /* This happens for example on obj2 and pic of the Calgary corpus */
+
+    /* Find the first bit length which could increase: */
+    do {
+        bits = max_length-1;
+        while (s->bl_count[bits] == 0) bits--;
+        s->bl_count[bits]--;      /* move one leaf down the tree */
+        s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
+        s->bl_count[max_length]--;
+        /* The brother of the overflow item also moves one step up,
+         * but this does not affect bl_count[max_length]
+         */
+        overflow -= 2;
+    } while (overflow > 0);
+
+    /* Now recompute all bit lengths, scanning in increasing frequency.
+     * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
+     * lengths instead of fixing only the wrong ones. This idea is taken
+     * from 'ar' written by Haruhiko Okumura.)
+     */
+    for (bits = max_length; bits != 0; bits--) {
+        n = s->bl_count[bits];
+        while (n != 0) {
+            m = s->heap[--h];
+            if (m > max_code) continue;
+            if (tree[m].Len != (unsigned) bits) {
+                Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
+                s->opt_len += ((long)bits - (long)tree[m].Len)
+                              *(long)tree[m].Freq;
+                tree[m].Len = (ush)bits;
+            }
+            n--;
+        }
+    }
+}
+
+/* ===========================================================================
+ * Generate the codes for a given tree and bit counts (which need not be
+ * optimal).
+ * IN assertion: the array bl_count contains the bit length statistics for
+ * the given tree and the field len is set for all tree elements.
+ * OUT assertion: the field code is set for all tree elements of non
+ *     zero code length.
+ */
+local void gen_codes (tree, max_code, bl_count)
+    ct_data *tree;             /* the tree to decorate */
+    int max_code;              /* largest code with non zero frequency */
+    ushf *bl_count;            /* number of codes at each bit length */
+{
+    ush next_code[MAX_BITS+1]; /* next code value for each bit length */
+    ush code = 0;              /* running code value */
+    int bits;                  /* bit index */
+    int n;                     /* code index */
+
+    /* The distribution counts are first used to generate the code values
+     * without bit reversal.
+     */
+    for (bits = 1; bits <= MAX_BITS; bits++) {
+        next_code[bits] = code = (code + bl_count[bits-1]) << 1;
+    }
+    /* Check that the bit counts in bl_count are consistent. The last code
+     * must be all ones.
+     */
+    Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
+            "inconsistent bit counts");
+    Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
+
+    for (n = 0;  n <= max_code; n++) {
+        int len = tree[n].Len;
+        if (len == 0) continue;
+        /* Now reverse the bits */
+        tree[n].Code = bi_reverse(next_code[len]++, len);
+
+        Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
+             n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
+    }
+}
+
+/* ===========================================================================
+ * Construct one Huffman tree and assigns the code bit strings and lengths.
+ * Update the total bit length for the current block.
+ * IN assertion: the field freq is set for all tree elements.
+ * OUT assertions: the fields len and code are set to the optimal bit length
+ *     and corresponding code. The length opt_len is updated; static_len is
+ *     also updated if stree is not null. The field max_code is set.
+ */
+local void build_tree(s, desc)
+    deflate_state *s;
+    tree_desc *desc; /* the tree descriptor */
+{
+    ct_data *tree         = desc->dyn_tree;
+    const ct_data *stree  = desc->stat_desc->static_tree;
+    int elems             = desc->stat_desc->elems;
+    int n, m;          /* iterate over heap elements */
+    int max_code = -1; /* largest code with non zero frequency */
+    int node;          /* new node being created */
+
+    /* Construct the initial heap, with least frequent element in
+     * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
+     * heap[0] is not used.
+     */
+    s->heap_len = 0, s->heap_max = HEAP_SIZE;
+
+    for (n = 0; n < elems; n++) {
+        if (tree[n].Freq != 0) {
+            s->heap[++(s->heap_len)] = max_code = n;
+            s->depth[n] = 0;
+        } else {
+            tree[n].Len = 0;
+        }
+    }
+
+    /* The pkzip format requires that at least one distance code exists,
+     * and that at least one bit should be sent even if there is only one
+     * possible code. So to avoid special checks later on we force at least
+     * two codes of non zero frequency.
+     */
+    while (s->heap_len < 2) {
+        node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
+        tree[node].Freq = 1;
+        s->depth[node] = 0;
+        s->opt_len--; if (stree) s->static_len -= stree[node].Len;
+        /* node is 0 or 1 so it does not have extra bits */
+    }
+    desc->max_code = max_code;
+
+    /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
+     * establish sub-heaps of increasing lengths:
+     */
+    for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
+
+    /* Construct the Huffman tree by repeatedly combining the least two
+     * frequent nodes.
+     */
+    node = elems;              /* next internal node of the tree */
+    do {
+        pqremove(s, tree, n);  /* n = node of least frequency */
+        m = s->heap[SMALLEST]; /* m = node of next least frequency */
+
+        s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
+        s->heap[--(s->heap_max)] = m;
+
+        /* Create a new node father of n and m */
+        tree[node].Freq = tree[n].Freq + tree[m].Freq;
+        s->depth[node] = (uch) (MAX(s->depth[n], s->depth[m]) + 1);
+        tree[n].Dad = tree[m].Dad = (ush)node;
+#ifdef DUMP_BL_TREE
+        if (tree == s->bl_tree) {
+            fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
+                    node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
+        }
+#endif
+        /* and insert the new node in the heap */
+        s->heap[SMALLEST] = node++;
+        pqdownheap(s, tree, SMALLEST);
+
+    } while (s->heap_len >= 2);
+
+    s->heap[--(s->heap_max)] = s->heap[SMALLEST];
+
+    /* At this point, the fields freq and dad are set. We can now
+     * generate the bit lengths.
+     */
+    gen_bitlen(s, (tree_desc *)desc);
+
+    /* The field len is now set, we can generate the bit codes */
+    gen_codes ((ct_data *)tree, max_code, s->bl_count);
+}
+
+/* ===========================================================================
+ * Scan a literal or distance tree to determine the frequencies of the codes
+ * in the bit length tree.
+ */
+local void scan_tree (s, tree, max_code)
+    deflate_state *s;
+    ct_data *tree;   /* the tree to be scanned */
+    int max_code;    /* and its largest code of non zero frequency */
+{
+    int n;                     /* iterates over all tree elements */
+    int prevlen = -1;          /* last emitted length */
+    int curlen;                /* length of current code */
+    int nextlen = tree[0].Len; /* length of next code */
+    int count = 0;             /* repeat count of the current code */
+    int max_count = 7;         /* max repeat count */
+    int min_count = 4;         /* min repeat count */
+
+    if (nextlen == 0) max_count = 138, min_count = 3;
+    tree[max_code+1].Len = (ush)0xffff; /* guard */
+
+    for (n = 0; n <= max_code; n++) {
+        curlen = nextlen; nextlen = tree[n+1].Len;
+        if (++count < max_count && curlen == nextlen) {
+            continue;
+        } else if (count < min_count) {
+            s->bl_tree[curlen].Freq += count;
+        } else if (curlen != 0) {
+            if (curlen != prevlen) s->bl_tree[curlen].Freq++;
+            s->bl_tree[REP_3_6].Freq++;
+        } else if (count <= 10) {
+            s->bl_tree[REPZ_3_10].Freq++;
+        } else {
+            s->bl_tree[REPZ_11_138].Freq++;
+        }
+        count = 0; prevlen = curlen;
+        if (nextlen == 0) {
+            max_count = 138, min_count = 3;
+        } else if (curlen == nextlen) {
+            max_count = 6, min_count = 3;
+        } else {
+            max_count = 7, min_count = 4;
+        }
+    }
+}
+
+/* ===========================================================================
+ * Send a literal or distance tree in compressed form, using the codes in
+ * bl_tree.
+ */
+local void send_tree (s, tree, max_code)
+    deflate_state *s;
+    ct_data *tree; /* the tree to be scanned */
+    int max_code;       /* and its largest code of non zero frequency */
+{
+    int n;                     /* iterates over all tree elements */
+    int prevlen = -1;          /* last emitted length */
+    int curlen;                /* length of current code */
+    int nextlen = tree[0].Len; /* length of next code */
+    int count = 0;             /* repeat count of the current code */
+    int max_count = 7;         /* max repeat count */
+    int min_count = 4;         /* min repeat count */
+
+    /* tree[max_code+1].Len = -1; */  /* guard already set */
+    if (nextlen == 0) max_count = 138, min_count = 3;
+
+    for (n = 0; n <= max_code; n++) {
+        curlen = nextlen; nextlen = tree[n+1].Len;
+        if (++count < max_count && curlen == nextlen) {
+            continue;
+        } else if (count < min_count) {
+            do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
+
+        } else if (curlen != 0) {
+            if (curlen != prevlen) {
+                send_code(s, curlen, s->bl_tree); count--;
+            }
+            Assert(count >= 3 && count <= 6, " 3_6?");
+            send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
+
+        } else if (count <= 10) {
+            send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
+
+        } else {
+            send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
+        }
+        count = 0; prevlen = curlen;
+        if (nextlen == 0) {
+            max_count = 138, min_count = 3;
+        } else if (curlen == nextlen) {
+            max_count = 6, min_count = 3;
+        } else {
+            max_count = 7, min_count = 4;
+        }
+    }
+}
+
+/* ===========================================================================
+ * Construct the Huffman tree for the bit lengths and return the index in
+ * bl_order of the last bit length code to send.
+ */
+local int build_bl_tree(s)
+    deflate_state *s;
+{
+    int max_blindex;  /* index of last bit length code of non zero freq */
+
+    /* Determine the bit length frequencies for literal and distance trees */
+    scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
+    scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
+
+    /* Build the bit length tree: */
+    build_tree(s, (tree_desc *)(&(s->bl_desc)));
+    /* opt_len now includes the length of the tree representations, except
+     * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
+     */
+
+    /* Determine the number of bit length codes to send. The pkzip format
+     * requires that at least 4 bit length codes be sent. (appnote.txt says
+     * 3 but the actual value used is 4.)
+     */
+    for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
+        if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
+    }
+    /* Update opt_len to include the bit length tree and counts */
+    s->opt_len += 3*(max_blindex+1) + 5+5+4;
+    Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
+            s->opt_len, s->static_len));
+
+    return max_blindex;
+}
+
+/* ===========================================================================
+ * Send the header for a block using dynamic Huffman trees: the counts, the
+ * lengths of the bit length codes, the literal tree and the distance tree.
+ * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
+ */
+local void send_all_trees(s, lcodes, dcodes, blcodes)
+    deflate_state *s;
+    int lcodes, dcodes, blcodes; /* number of codes for each tree */
+{
+    int rank;                    /* index in bl_order */
+
+    Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
+    Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
+            "too many codes");
+    Tracev((stderr, "\nbl counts: "));
+    send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
+    send_bits(s, dcodes-1,   5);
+    send_bits(s, blcodes-4,  4); /* not -3 as stated in appnote.txt */
+    for (rank = 0; rank < blcodes; rank++) {
+        Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
+        send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
+    }
+    Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
+
+    send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
+    Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
+
+    send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
+    Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
+}
+
+/* ===========================================================================
+ * Send a stored block
+ */
+void _tr_stored_block(s, buf, stored_len, eof)
+    deflate_state *s;
+    charf *buf;       /* input block */
+    ulg stored_len;   /* length of input block */
+    int eof;          /* true if this is the last block for a file */
+{
+    send_bits(s, (STORED_BLOCK<<1)+eof, 3);  /* send block type */
+#ifdef DEBUG
+    s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
+    s->compressed_len += (stored_len + 4) << 3;
+#endif
+    copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
+}
+
+/* ===========================================================================
+ * Send one empty static block to give enough lookahead for inflate.
+ * This takes 10 bits, of which 7 may remain in the bit buffer.
+ * The current inflate code requires 9 bits of lookahead. If the
+ * last two codes for the previous block (real code plus EOB) were coded
+ * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
+ * the last real code. In this case we send two empty static blocks instead
+ * of one. (There are no problems if the previous block is stored or fixed.)
+ * To simplify the code, we assume the worst case of last real code encoded
+ * on one bit only.
+ */
+void _tr_align(s)
+    deflate_state *s;
+{
+    send_bits(s, STATIC_TREES<<1, 3);
+    send_code(s, END_BLOCK, static_ltree);
+#ifdef DEBUG
+    s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
+#endif
+    bi_flush(s);
+    /* Of the 10 bits for the empty block, we have already sent
+     * (10 - bi_valid) bits. The lookahead for the last real code (before
+     * the EOB of the previous block) was thus at least one plus the length
+     * of the EOB plus what we have just sent of the empty static block.
+     */
+    if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
+        send_bits(s, STATIC_TREES<<1, 3);
+        send_code(s, END_BLOCK, static_ltree);
+#ifdef DEBUG
+        s->compressed_len += 10L;
+#endif
+        bi_flush(s);
+    }
+    s->last_eob_len = 7;
+}
+
+/* ===========================================================================
+ * Determine the best encoding for the current block: dynamic trees, static
+ * trees or store, and output the encoded block to the zip file.
+ */
+void _tr_flush_block(s, buf, stored_len, eof)
+    deflate_state *s;
+    charf *buf;       /* input block, or NULL if too old */
+    ulg stored_len;   /* length of input block */
+    int eof;          /* true if this is the last block for a file */
+{
+    ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
+    int max_blindex = 0;  /* index of last bit length code of non zero freq */
+
+    /* Build the Huffman trees unless a stored block is forced */
+    if (s->level > 0) {
+
+	 /* Check if the file is ascii or binary */
+	if (s->data_type == Z_UNKNOWN) set_data_type(s);
+
+	/* Construct the literal and distance trees */
+	build_tree(s, (tree_desc *)(&(s->l_desc)));
+	Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
+		s->static_len));
+
+	build_tree(s, (tree_desc *)(&(s->d_desc)));
+	Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
+		s->static_len));
+	/* At this point, opt_len and static_len are the total bit lengths of
+	 * the compressed block data, excluding the tree representations.
+	 */
+
+	/* Build the bit length tree for the above two trees, and get the index
+	 * in bl_order of the last bit length code to send.
+	 */
+	max_blindex = build_bl_tree(s);
+
+	/* Determine the best encoding. Compute first the block length in bytes*/
+	opt_lenb = (s->opt_len+3+7)>>3;
+	static_lenb = (s->static_len+3+7)>>3;
+
+	Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
+		opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
+		s->last_lit));
+
+	if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
+
+    } else {
+        Assert(buf != (char*)0, "lost buf");
+	opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
+    }
+
+#ifdef FORCE_STORED
+    if (buf != (char*)0) { /* force stored block */
+#else
+    if (stored_len+4 <= opt_lenb && buf != (char*)0) {
+                       /* 4: two words for the lengths */
+#endif
+        /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
+         * Otherwise we can't have processed more than WSIZE input bytes since
+         * the last block flush, because compression would have been
+         * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
+         * transform a block into a stored block.
+         */
+        _tr_stored_block(s, buf, stored_len, eof);
+
+#ifdef FORCE_STATIC
+    } else if (static_lenb >= 0) { /* force static trees */
+#else
+    } else if (static_lenb == opt_lenb) {
+#endif
+        send_bits(s, (STATIC_TREES<<1)+eof, 3);
+        compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
+#ifdef DEBUG
+        s->compressed_len += 3 + s->static_len;
+#endif
+    } else {
+        send_bits(s, (DYN_TREES<<1)+eof, 3);
+        send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
+                       max_blindex+1);
+        compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
+#ifdef DEBUG
+        s->compressed_len += 3 + s->opt_len;
+#endif
+    }
+    Assert (s->compressed_len == s->bits_sent, "bad compressed size");
+    /* The above check is made mod 2^32, for files larger than 512 MB
+     * and uLong implemented on 32 bits.
+     */
+    init_block(s);
+
+    if (eof) {
+        bi_windup(s);
+#ifdef DEBUG
+        s->compressed_len += 7;  /* align on byte boundary */
+#endif
+    }
+    Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
+           s->compressed_len-7*eof));
+}
+
+/* ===========================================================================
+ * Save the match info and tally the frequency counts. Return true if
+ * the current block must be flushed.
+ */
+int _tr_tally (s, dist, lc)
+    deflate_state *s;
+    unsigned dist;  /* distance of matched string */
+    unsigned lc;    /* match length-MIN_MATCH or unmatched char (if dist==0) */
+{
+    s->d_buf[s->last_lit] = (ush)dist;
+    s->l_buf[s->last_lit++] = (uch)lc;
+    if (dist == 0) {
+        /* lc is the unmatched char */
+        s->dyn_ltree[lc].Freq++;
+    } else {
+        s->matches++;
+        /* Here, lc is the match length - MIN_MATCH */
+        dist--;             /* dist = match distance - 1 */
+        Assert((ush)dist < (ush)MAX_DIST(s) &&
+               (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
+               (ush)d_code(dist) < (ush)D_CODES,  "_tr_tally: bad match");
+
+        s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++;
+        s->dyn_dtree[d_code(dist)].Freq++;
+    }
+
+#ifdef TRUNCATE_BLOCK
+    /* Try to guess if it is profitable to stop the current block here */
+    if ((s->last_lit & 0x1fff) == 0 && s->level > 2) {
+        /* Compute an upper bound for the compressed length */
+        ulg out_length = (ulg)s->last_lit*8L;
+        ulg in_length = (ulg)((long)s->strstart - s->block_start);
+        int dcode;
+        for (dcode = 0; dcode < D_CODES; dcode++) {
+            out_length += (ulg)s->dyn_dtree[dcode].Freq *
+                (5L+extra_dbits[dcode]);
+        }
+        out_length >>= 3;
+        Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
+               s->last_lit, in_length, out_length,
+               100L - out_length*100L/in_length));
+        if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
+    }
+#endif
+    return (s->last_lit == s->lit_bufsize-1);
+    /* We avoid equality with lit_bufsize because of wraparound at 64K
+     * on 16 bit machines and because stored blocks are restricted to
+     * 64K-1 bytes.
+     */
+}
+
+/* ===========================================================================
+ * Send the block data compressed using the given Huffman trees
+ */
+local void compress_block(s, ltree, dtree)
+    deflate_state *s;
+    ct_data *ltree; /* literal tree */
+    ct_data *dtree; /* distance tree */
+{
+    unsigned dist;      /* distance of matched string */
+    int lc;             /* match length or unmatched char (if dist == 0) */
+    unsigned lx = 0;    /* running index in l_buf */
+    unsigned code;      /* the code to send */
+    int extra;          /* number of extra bits to send */
+
+    if (s->last_lit != 0) do {
+        dist = s->d_buf[lx];
+        lc = s->l_buf[lx++];
+        if (dist == 0) {
+            send_code(s, lc, ltree); /* send a literal byte */
+            Tracecv(isgraph(lc), (stderr," '%c' ", lc));
+        } else {
+            /* Here, lc is the match length - MIN_MATCH */
+            code = _length_code[lc];
+            send_code(s, code+LITERALS+1, ltree); /* send the length code */
+            extra = extra_lbits[code];
+            if (extra != 0) {
+                lc -= base_length[code];
+                send_bits(s, lc, extra);       /* send the extra length bits */
+            }
+            dist--; /* dist is now the match distance - 1 */
+            code = d_code(dist);
+            Assert (code < D_CODES, "bad d_code");
+
+            send_code(s, code, dtree);       /* send the distance code */
+            extra = extra_dbits[code];
+            if (extra != 0) {
+                dist -= base_dist[code];
+                send_bits(s, dist, extra);   /* send the extra distance bits */
+            }
+        } /* literal or match pair ? */
+
+        /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
+        Assert(s->pending < s->lit_bufsize + 2*lx, "pendingBuf overflow");
+
+    } while (lx < s->last_lit);
+
+    send_code(s, END_BLOCK, ltree);
+    s->last_eob_len = ltree[END_BLOCK].Len;
+}
+
+/* ===========================================================================
+ * Set the data type to ASCII or BINARY, using a crude approximation:
+ * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
+ * IN assertion: the fields freq of dyn_ltree are set and the total of all
+ * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
+ */
+local void set_data_type(s)
+    deflate_state *s;
+{
+    int n = 0;
+    unsigned ascii_freq = 0;
+    unsigned bin_freq = 0;
+    while (n < 7)        bin_freq += s->dyn_ltree[n++].Freq;
+    while (n < 128)    ascii_freq += s->dyn_ltree[n++].Freq;
+    while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq;
+    s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? Z_BINARY : Z_ASCII);
+}
+
+/* ===========================================================================
+ * Reverse the first len bits of a code, using straightforward code (a faster
+ * method would use a table)
+ * IN assertion: 1 <= len <= 15
+ */
+local unsigned bi_reverse(code, len)
+    unsigned code; /* the value to invert */
+    int len;       /* its bit length */
+{
+    register unsigned res = 0;
+    do {
+        res |= code & 1;
+        code >>= 1, res <<= 1;
+    } while (--len > 0);
+    return res >> 1;
+}
+
+/* ===========================================================================
+ * Flush the bit buffer, keeping at most 7 bits in it.
+ */
+local void bi_flush(s)
+    deflate_state *s;
+{
+    if (s->bi_valid == 16) {
+        put_short(s, s->bi_buf);
+        s->bi_buf = 0;
+        s->bi_valid = 0;
+    } else if (s->bi_valid >= 8) {
+        put_byte(s, (Byte)s->bi_buf);
+        s->bi_buf >>= 8;
+        s->bi_valid -= 8;
+    }
+}
+
+/* ===========================================================================
+ * Flush the bit buffer and align the output on a byte boundary
+ */
+local void bi_windup(s)
+    deflate_state *s;
+{
+    if (s->bi_valid > 8) {
+        put_short(s, s->bi_buf);
+    } else if (s->bi_valid > 0) {
+        put_byte(s, (Byte)s->bi_buf);
+    }
+    s->bi_buf = 0;
+    s->bi_valid = 0;
+#ifdef DEBUG
+    s->bits_sent = (s->bits_sent+7) & ~7;
+#endif
+}
+
+/* ===========================================================================
+ * Copy a stored block, storing first the length and its
+ * one's complement if requested.
+ */
+local void copy_block(s, buf, len, header)
+    deflate_state *s;
+    charf    *buf;    /* the input data */
+    unsigned len;     /* its length */
+    int      header;  /* true if block header must be written */
+{
+    bi_windup(s);        /* align on byte boundary */
+    s->last_eob_len = 8; /* enough lookahead for inflate */
+
+    if (header) {
+        put_short(s, (ush)len);   
+        put_short(s, (ush)~len);
+#ifdef DEBUG
+        s->bits_sent += 2*16;
+#endif
+    }
+#ifdef DEBUG
+    s->bits_sent += (ulg)len<<3;
+#endif
+    while (len--) {
+        put_byte(s, *buf++);
+    }
+}
diff --git a/nx-X11/extras/zlib/trees.h b/nx-X11/extras/zlib/trees.h
new file mode 100644
index 000000000..72facf900
--- /dev/null
+++ b/nx-X11/extras/zlib/trees.h
@@ -0,0 +1,128 @@
+/* header created automatically with -DGEN_TREES_H */
+
+local const ct_data static_ltree[L_CODES+2] = {
+{{ 12},{  8}}, {{140},{  8}}, {{ 76},{  8}}, {{204},{  8}}, {{ 44},{  8}},
+{{172},{  8}}, {{108},{  8}}, {{236},{  8}}, {{ 28},{  8}}, {{156},{  8}},
+{{ 92},{  8}}, {{220},{  8}}, {{ 60},{  8}}, {{188},{  8}}, {{124},{  8}},
+{{252},{  8}}, {{  2},{  8}}, {{130},{  8}}, {{ 66},{  8}}, {{194},{  8}},
+{{ 34},{  8}}, {{162},{  8}}, {{ 98},{  8}}, {{226},{  8}}, {{ 18},{  8}},
+{{146},{  8}}, {{ 82},{  8}}, {{210},{  8}}, {{ 50},{  8}}, {{178},{  8}},
+{{114},{  8}}, {{242},{  8}}, {{ 10},{  8}}, {{138},{  8}}, {{ 74},{  8}},
+{{202},{  8}}, {{ 42},{  8}}, {{170},{  8}}, {{106},{  8}}, {{234},{  8}},
+{{ 26},{  8}}, {{154},{  8}}, {{ 90},{  8}}, {{218},{  8}}, {{ 58},{  8}},
+{{186},{  8}}, {{122},{  8}}, {{250},{  8}}, {{  6},{  8}}, {{134},{  8}},
+{{ 70},{  8}}, {{198},{  8}}, {{ 38},{  8}}, {{166},{  8}}, {{102},{  8}},
+{{230},{  8}}, {{ 22},{  8}}, {{150},{  8}}, {{ 86},{  8}}, {{214},{  8}},
+{{ 54},{  8}}, {{182},{  8}}, {{118},{  8}}, {{246},{  8}}, {{ 14},{  8}},
+{{142},{  8}}, {{ 78},{  8}}, {{206},{  8}}, {{ 46},{  8}}, {{174},{  8}},
+{{110},{  8}}, {{238},{  8}}, {{ 30},{  8}}, {{158},{  8}}, {{ 94},{  8}},
+{{222},{  8}}, {{ 62},{  8}}, {{190},{  8}}, {{126},{  8}}, {{254},{  8}},
+{{  1},{  8}}, {{129},{  8}}, {{ 65},{  8}}, {{193},{  8}}, {{ 33},{  8}},
+{{161},{  8}}, {{ 97},{  8}}, {{225},{  8}}, {{ 17},{  8}}, {{145},{  8}},
+{{ 81},{  8}}, {{209},{  8}}, {{ 49},{  8}}, {{177},{  8}}, {{113},{  8}},
+{{241},{  8}}, {{  9},{  8}}, {{137},{  8}}, {{ 73},{  8}}, {{201},{  8}},
+{{ 41},{  8}}, {{169},{  8}}, {{105},{  8}}, {{233},{  8}}, {{ 25},{  8}},
+{{153},{  8}}, {{ 89},{  8}}, {{217},{  8}}, {{ 57},{  8}}, {{185},{  8}},
+{{121},{  8}}, {{249},{  8}}, {{  5},{  8}}, {{133},{  8}}, {{ 69},{  8}},
+{{197},{  8}}, {{ 37},{  8}}, {{165},{  8}}, {{101},{  8}}, {{229},{  8}},
+{{ 21},{  8}}, {{149},{  8}}, {{ 85},{  8}}, {{213},{  8}}, {{ 53},{  8}},
+{{181},{  8}}, {{117},{  8}}, {{245},{  8}}, {{ 13},{  8}}, {{141},{  8}},
+{{ 77},{  8}}, {{205},{  8}}, {{ 45},{  8}}, {{173},{  8}}, {{109},{  8}},
+{{237},{  8}}, {{ 29},{  8}}, {{157},{  8}}, {{ 93},{  8}}, {{221},{  8}},
+{{ 61},{  8}}, {{189},{  8}}, {{125},{  8}}, {{253},{  8}}, {{ 19},{  9}},
+{{275},{  9}}, {{147},{  9}}, {{403},{  9}}, {{ 83},{  9}}, {{339},{  9}},
+{{211},{  9}}, {{467},{  9}}, {{ 51},{  9}}, {{307},{  9}}, {{179},{  9}},
+{{435},{  9}}, {{115},{  9}}, {{371},{  9}}, {{243},{  9}}, {{499},{  9}},
+{{ 11},{  9}}, {{267},{  9}}, {{139},{  9}}, {{395},{  9}}, {{ 75},{  9}},
+{{331},{  9}}, {{203},{  9}}, {{459},{  9}}, {{ 43},{  9}}, {{299},{  9}},
+{{171},{  9}}, {{427},{  9}}, {{107},{  9}}, {{363},{  9}}, {{235},{  9}},
+{{491},{  9}}, {{ 27},{  9}}, {{283},{  9}}, {{155},{  9}}, {{411},{  9}},
+{{ 91},{  9}}, {{347},{  9}}, {{219},{  9}}, {{475},{  9}}, {{ 59},{  9}},
+{{315},{  9}}, {{187},{  9}}, {{443},{  9}}, {{123},{  9}}, {{379},{  9}},
+{{251},{  9}}, {{507},{  9}}, {{  7},{  9}}, {{263},{  9}}, {{135},{  9}},
+{{391},{  9}}, {{ 71},{  9}}, {{327},{  9}}, {{199},{  9}}, {{455},{  9}},
+{{ 39},{  9}}, {{295},{  9}}, {{167},{  9}}, {{423},{  9}}, {{103},{  9}},
+{{359},{  9}}, {{231},{  9}}, {{487},{  9}}, {{ 23},{  9}}, {{279},{  9}},
+{{151},{  9}}, {{407},{  9}}, {{ 87},{  9}}, {{343},{  9}}, {{215},{  9}},
+{{471},{  9}}, {{ 55},{  9}}, {{311},{  9}}, {{183},{  9}}, {{439},{  9}},
+{{119},{  9}}, {{375},{  9}}, {{247},{  9}}, {{503},{  9}}, {{ 15},{  9}},
+{{271},{  9}}, {{143},{  9}}, {{399},{  9}}, {{ 79},{  9}}, {{335},{  9}},
+{{207},{  9}}, {{463},{  9}}, {{ 47},{  9}}, {{303},{  9}}, {{175},{  9}},
+{{431},{  9}}, {{111},{  9}}, {{367},{  9}}, {{239},{  9}}, {{495},{  9}},
+{{ 31},{  9}}, {{287},{  9}}, {{159},{  9}}, {{415},{  9}}, {{ 95},{  9}},
+{{351},{  9}}, {{223},{  9}}, {{479},{  9}}, {{ 63},{  9}}, {{319},{  9}},
+{{191},{  9}}, {{447},{  9}}, {{127},{  9}}, {{383},{  9}}, {{255},{  9}},
+{{511},{  9}}, {{  0},{  7}}, {{ 64},{  7}}, {{ 32},{  7}}, {{ 96},{  7}},
+{{ 16},{  7}}, {{ 80},{  7}}, {{ 48},{  7}}, {{112},{  7}}, {{  8},{  7}},
+{{ 72},{  7}}, {{ 40},{  7}}, {{104},{  7}}, {{ 24},{  7}}, {{ 88},{  7}},
+{{ 56},{  7}}, {{120},{  7}}, {{  4},{  7}}, {{ 68},{  7}}, {{ 36},{  7}},
+{{100},{  7}}, {{ 20},{  7}}, {{ 84},{  7}}, {{ 52},{  7}}, {{116},{  7}},
+{{  3},{  8}}, {{131},{  8}}, {{ 67},{  8}}, {{195},{  8}}, {{ 35},{  8}},
+{{163},{  8}}, {{ 99},{  8}}, {{227},{  8}}
+};
+
+local const ct_data static_dtree[D_CODES] = {
+{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
+{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
+{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
+{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
+{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
+{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
+};
+
+const uch _dist_code[DIST_CODE_LEN] = {
+ 0,  1,  2,  3,  4,  4,  5,  5,  6,  6,  6,  6,  7,  7,  7,  7,  8,  8,  8,  8,
+ 8,  8,  8,  8,  9,  9,  9,  9,  9,  9,  9,  9, 10, 10, 10, 10, 10, 10, 10, 10,
+10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
+11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
+12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,  0,  0, 16, 17,
+18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
+};
+
+const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {
+ 0,  1,  2,  3,  4,  5,  6,  7,  8,  8,  9,  9, 10, 10, 11, 11, 12, 12, 12, 12,
+13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
+17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
+19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
+21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
+22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
+};
+
+local const int base_length[LENGTH_CODES] = {
+0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
+64, 80, 96, 112, 128, 160, 192, 224, 0
+};
+
+local const int base_dist[D_CODES] = {
+    0,     1,     2,     3,     4,     6,     8,    12,    16,    24,
+   32,    48,    64,    96,   128,   192,   256,   384,   512,   768,
+ 1024,  1536,  2048,  3072,  4096,  6144,  8192, 12288, 16384, 24576
+};
+
diff --git a/nx-X11/extras/zlib/uncompr.c b/nx-X11/extras/zlib/uncompr.c
new file mode 100644
index 000000000..f34fa016a
--- /dev/null
+++ b/nx-X11/extras/zlib/uncompr.c
@@ -0,0 +1,56 @@
+/* uncompr.c -- decompress a memory buffer
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+#include "zlib.h"
+
+/* ===========================================================================
+     Decompresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer. Upon entry, destLen is the total
+   size of the destination buffer, which must be large enough to hold the
+   entire uncompressed data. (The size of the uncompressed data must have
+   been saved previously by the compressor and transmitted to the decompressor
+   by some mechanism outside the scope of this compression library.)
+   Upon exit, destLen is the actual size of the compressed buffer.
+     This function can be used to decompress a whole file at once if the
+   input file is mmap'ed.
+
+     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer, or Z_DATA_ERROR if the input data was corrupted.
+*/
+int ZEXPORT uncompress (dest, destLen, source, sourceLen)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+{
+    z_stream stream;
+    int err;
+
+    stream.next_in = (Bytef*)source;
+    stream.avail_in = (uInt)sourceLen;
+    /* Check for source > 64K on 16-bit machine: */
+    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
+
+    stream.next_out = dest;
+    stream.avail_out = (uInt)*destLen;
+    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+
+    stream.zalloc = (alloc_func)0;
+    stream.zfree = (free_func)0;
+
+    err = inflateInit(&stream);
+    if (err != Z_OK) return err;
+
+    err = inflate(&stream, Z_FINISH);
+    if (err != Z_STREAM_END) {
+        inflateEnd(&stream);
+        return err == Z_OK ? Z_BUF_ERROR : err;
+    }
+    *destLen = stream.total_out;
+
+    err = inflateEnd(&stream);
+    return err;
+}
diff --git a/nx-X11/extras/zlib/zconf.h b/nx-X11/extras/zlib/zconf.h
new file mode 100644
index 000000000..018841d00
--- /dev/null
+++ b/nx-X11/extras/zlib/zconf.h
@@ -0,0 +1,283 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* $XFree86: xc/lib/zlib/zconf.h,v 1.9 2002/05/31 18:45:52 dawes Exp $ */
+
+#ifndef _ZCONF_H
+#define _ZCONF_H
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ */
+#ifdef Z_PREFIX
+#  define deflateInit_	z_deflateInit_
+#  define deflate	z_deflate
+#  define deflateEnd	z_deflateEnd
+#  define inflateInit_ 	z_inflateInit_
+#  define inflate	z_inflate
+#  define inflateEnd	z_inflateEnd
+#  define deflateInit2_	z_deflateInit2_
+#  define deflateSetDictionary z_deflateSetDictionary
+#  define deflateCopy	z_deflateCopy
+#  define deflateReset	z_deflateReset
+#  define deflateParams	z_deflateParams
+#  define inflateInit2_	z_inflateInit2_
+#  define inflateSetDictionary z_inflateSetDictionary
+#  define inflateSync	z_inflateSync
+#  define inflateSyncPoint z_inflateSyncPoint
+#  define inflateReset	z_inflateReset
+#  define compress	z_compress
+#  define compress2	z_compress2
+#  define uncompress	z_uncompress
+#  define adler32	z_adler32
+#  define crc32		z_crc32
+#  define get_crc_table z_get_crc_table
+
+#  define Byte		z_Byte
+#  define uInt		z_uInt
+#  define uLong		z_uLong
+#  define Bytef	        z_Bytef
+#  define charf		z_charf
+#  define intf		z_intf
+#  define uIntf		z_uIntf
+#  define uLongf	z_uLongf
+#  define voidpf	z_voidpf
+#  define voidp		z_voidp
+#endif
+
+#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
+#  define WIN32
+#endif
+#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386) || defined(__UNIXOS2__)
+#  ifndef __32BIT__
+#    define __32BIT__
+#  endif
+#endif
+#if defined(__MSDOS__) && !defined(MSDOS)
+#  define MSDOS
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#if defined(MSDOS) && !defined(__32BIT__)
+#  define MAXSEG_64K
+#endif
+#ifdef MSDOS
+#  define UNALIGNED_OK
+#endif
+
+#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32))  && !defined(STDC)
+#  define STDC
+#endif
+#if defined(__STDC__) || defined(__cplusplus) || defined(__OS2__)
+#  ifndef STDC
+#    define STDC
+#  endif
+#endif
+
+#ifndef STDC
+#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+#    define const
+#  endif
+#endif
+
+/* Some Mac compilers merge all .h files incorrectly: */
+#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__)
+#  define NO_DUMMY_DECL
+#endif
+
+/* Old Borland C incorrectly complains about missing returns: */
+#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500)
+#  define NEED_DUMMY_RETURN
+#endif
+
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  ifdef MAXSEG_64K
+#    define MAX_MEM_LEVEL 8
+#  else
+#    define MAX_MEM_LEVEL 9
+#  endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+                        /* Type declarations */
+
+#ifndef OF /* function prototypes */
+#  ifdef STDC
+#    define OF(args)  args
+#  else
+#    define OF(args)  ()
+#  endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__)
+   /* MSC small or medium model */
+#  define SMALL_MEDIUM
+#  ifdef _MSC_VER
+#    define FAR _far
+#  else
+#    define FAR far
+#  endif
+#endif
+#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__))
+#  ifndef __32BIT__
+#    define SMALL_MEDIUM
+#    define FAR _far
+#  endif
+#endif
+
+/* Compile with -DZLIB_DLL for Windows DLL support */
+#if defined(ZLIB_DLL)
+#  if defined(_WINDOWS) || defined(WINDOWS)
+#    ifdef FAR
+#      undef FAR
+#    endif
+#    include <windows.h>
+#    define ZEXPORT  WINAPI
+#    ifdef WIN32
+#      define ZEXPORTVA  WINAPIV
+#    else
+#      define ZEXPORTVA  FAR _cdecl _export
+#    endif
+#  endif
+#  if defined (__BORLANDC__)
+#    if (__BORLANDC__ >= 0x0500) && defined (WIN32)
+#      include <windows.h>
+#      define ZEXPORT __declspec(dllexport) WINAPI
+#      define ZEXPORTRVA __declspec(dllexport) WINAPIV
+#    else
+#      if defined (_Windows) && defined (__DLL__)
+#        define ZEXPORT _export
+#        define ZEXPORTVA _export
+#      endif
+#    endif
+#  endif
+#endif
+
+#if defined (__BEOS__)
+#  if defined (ZLIB_DLL)
+#    define ZEXTERN extern __declspec(dllexport)
+#  else
+#    define ZEXTERN extern __declspec(dllimport)
+#  endif
+#endif
+
+#ifndef ZEXPORT
+#  define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+#  define ZEXPORTVA
+#endif
+#ifndef ZEXTERN
+#  define ZEXTERN extern
+#endif
+
+#ifndef FAR
+#   define FAR
+#endif
+
+#if !defined(MACOS) && !defined(TARGET_OS_MAC)
+typedef unsigned char  Byte;  /* 8 bits */
+#endif
+typedef unsigned int   uInt;  /* 16 bits or more */
+typedef unsigned long  uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+#  define Bytef Byte FAR
+#else
+   typedef Byte  FAR Bytef;
+#endif
+typedef char  FAR charf;
+typedef int   FAR intf;
+typedef uInt  FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+   typedef void FAR *voidpf;
+   typedef void     *voidp;
+#else
+   typedef Byte FAR *voidpf;
+   typedef Byte     *voidp;
+#endif
+
+#ifndef X_NOT_POSIX
+#  include <sys/types.h> /* for off_t */
+#ifndef WIN32
+#  include <unistd.h>    /* for SEEK_* and off_t */
+#else
+#  include <stdio.h>	 /* this is where VC++ has SEEK_ */
+#endif
+#  define z_off_t  off_t
+#endif
+#ifndef SEEK_SET
+#  define SEEK_SET        0       /* Seek from beginning of file.  */
+#  define SEEK_CUR        1       /* Seek from current position.  */
+#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
+#endif
+#ifndef z_off_t
+#  define  z_off_t long
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+#   pragma map(deflateInit_,"DEIN")
+#   pragma map(deflateInit2_,"DEIN2")
+#   pragma map(deflateEnd,"DEEND")
+#   pragma map(inflateInit_,"ININ")
+#   pragma map(inflateInit2_,"ININ2")
+#   pragma map(inflateEnd,"INEND")
+#   pragma map(inflateSync,"INSY")
+#   pragma map(inflateSetDictionary,"INSEDI")
+#   pragma map(inflate_blocks,"INBL")
+#   pragma map(inflate_blocks_new,"INBLNE")
+#   pragma map(inflate_blocks_free,"INBLFR")
+#   pragma map(inflate_blocks_reset,"INBLRE")
+#   pragma map(inflate_codes_free,"INCOFR")
+#   pragma map(inflate_codes,"INCO")
+#   pragma map(inflate_fast,"INFA")
+#   pragma map(inflate_flush,"INFLU")
+#   pragma map(inflate_mask,"INMA")
+#   pragma map(inflate_set_dictionary,"INSEDI2")
+#   pragma map(inflate_copyright,"INCOPY")
+#   pragma map(inflate_trees_bits,"INTRBI")
+#   pragma map(inflate_trees_dynamic,"INTRDY")
+#   pragma map(inflate_trees_fixed,"INTRFI")
+#   pragma map(inflate_trees_free,"INTRFR")
+#endif
+
+#endif /* _ZCONF_H */
diff --git a/nx-X11/extras/zlib/zlib.3 b/nx-X11/extras/zlib/zlib.3
new file mode 100644
index 000000000..3a6e45047
--- /dev/null
+++ b/nx-X11/extras/zlib/zlib.3
@@ -0,0 +1,107 @@
+.TH ZLIB 3 "11 March 2002"
+.SH NAME
+zlib \- compression/decompression library
+.SH SYNOPSIS
+[see
+.I zlib.h
+for full description]
+.SH DESCRIPTION
+The
+.I zlib
+library is a general purpose data compression library.
+The code is thread safe.
+It provides in-memory compression and decompression functions,
+including integrity checks of the uncompressed data.
+This version of the library supports only one compression method (deflation)
+but other algorithms will be added later and will have the same stream interface.
+.LP
+Compression can be done in a single step if the buffers are large enough
+(for example if an input file is mmap'ed),
+or can be done by repeated calls of the compression function.
+In the latter case,
+the application must provide more input and/or consume the output
+(providing more output space) before each call.
+.LP
+The library also supports reading and writing files in
+.I gzip
+(.gz) format
+with an interface similar to that of stdio.
+.LP
+The library does not install any signal handler. The decoder checks
+the consistency of the compressed data, so the library should never
+crash even in case of corrupted input.
+.LP
+All functions of the compression library are documented in the file
+.IR zlib.h.
+The distribution source includes examples of use of the library
+the files
+.I example.c
+and
+.IR minigzip.c .
+.LP
+A Java implementation of
+.IR zlib
+is available in the Java Development Kit 1.1
+.IP
+http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
+.LP
+A Perl interface to
+.IR zlib ,
+written by Paul Marquess (pmarquess@bfsec.bt.co.uk)
+is available at CPAN (Comprehensive Perl Archive Network) sites,
+such as:
+.IP
+ftp://ftp.cis.ufl.edu/pub/perl/CPAN/modules/by-module/Compress/Compress-Zlib*
+.LP
+A Python interface to
+.IR zlib
+written by A.M. Kuchling <amk@magnet.com>
+is available from the Python Software Association sites, such as:
+.IP
+ftp://ftp.python.org/pub/python/contrib/Encoding/zlib*.tar.gz
+.SH "SEE ALSO"
+Questions about zlib should be sent to:
+.IP
+zlib@quest.jpl.nasa.gov
+or, if this fails, to the author addresses given below.
+The zlib home page is:
+.IP
+http://www.cdrom.com/pub/infozip/zlib/
+.LP
+The data format used by the zlib library is described by RFC
+(Request for Comments) 1950 to 1952 in the files: 
+.IP
+ftp://ds.internic.net/rfc/rfc1950.txt (zlib format)
+.br
+rfc1951.txt (deflate format)
+.br
+rfc1952.txt (gzip format)
+.LP
+These documents are also available in other formats from:
+.IP
+ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
+.SH AUTHORS
+Version 1.1.4
+Copyright (C) 1995-2002 Jean-loup Gailly (jloup@gzip.org)
+and Mark Adler (madler@alumni.caltech.edu).
+.LP
+This software is provided "as-is,"
+without any express or implied warranty.
+In no event will the authors be held liable for any damages
+arising from the use of this software.
+See the distribution directory with respect to requirements
+governing redistribution.
+The deflate format used by
+.I zlib
+was defined by Phil Katz.
+The deflate and
+.I zlib
+specifications were written by L. Peter Deutsch.
+Thanks to all the people who reported problems and suggested various
+improvements in
+.IR zlib ;
+who are too numerous to cite here.
+.LP
+UNIX manual page by R. P. C. Rodgers,
+U.S. National Library of Medicine (rodgers@nlm.nih.gov).
+.\" end of man page
diff --git a/nx-X11/extras/zlib/zlib.h b/nx-X11/extras/zlib/zlib.h
new file mode 100644
index 000000000..52cb529f6
--- /dev/null
+++ b/nx-X11/extras/zlib/zlib.h
@@ -0,0 +1,893 @@
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+  version 1.1.4, March 11th, 2002
+
+  Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  jloup@gzip.org          madler@alumni.caltech.edu
+
+
+  The data format used by the zlib library is described by RFCs (Request for
+  Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
+  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+*/
+
+#ifndef _ZLIB_H
+#define _ZLIB_H
+
+#include "zconf.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define ZLIB_VERSION "1.1.4"
+
+/* 
+     The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed
+  data.  This version of the library supports only one compression method
+  (deflation) but other algorithms will be added later and will have the same
+  stream interface.
+
+     Compression can be done in a single step if the buffers are large
+  enough (for example if an input file is mmap'ed), or can be done by
+  repeated calls of the compression function.  In the latter case, the
+  application must provide more input and/or consume the output
+  (providing more output space) before each call.
+
+     The library also supports reading and writing files in gzip (.gz) format
+  with an interface similar to that of stdio.
+
+     The library does not install any signal handler. The decoder checks
+  the consistency of the compressed data, so the library should never
+  crash even in case of corrupted input.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+    Bytef    *next_in;  /* next input byte */
+    uInt     avail_in;  /* number of bytes available at next_in */
+    uLong    total_in;  /* total nb of input bytes read so far */
+
+    Bytef    *next_out; /* next output byte should be put there */
+    uInt     avail_out; /* remaining free space at next_out */
+    uLong    total_out; /* total nb of bytes output so far */
+
+    char     *msg;      /* last error message, NULL if no error */
+    struct internal_state FAR *state; /* not visible by applications */
+
+    alloc_func zalloc;  /* used to allocate the internal state */
+    free_func  zfree;   /* used to free the internal state */
+    voidpf     opaque;  /* private data object passed to zalloc and zfree */
+
+    int     data_type;  /* best guess about the data type: ascii or binary */
+    uLong   adler;      /* adler32 value of the uncompressed data */
+    uLong   reserved;   /* reserved for future use */
+} z_stream;
+
+typedef z_stream FAR *z_streamp;
+
+/*
+   The application must update next_in and avail_in when avail_in has
+   dropped to zero. It must update next_out and avail_out when avail_out
+   has dropped to zero. The application must initialize zalloc, zfree and
+   opaque before calling the init function. All other fields are set by the
+   compression library and must not be updated by the application.
+
+   The opaque value provided by the application will be passed as the first
+   parameter for calls of zalloc and zfree. This can be useful for custom
+   memory management. The compression library attaches no meaning to the
+   opaque value.
+
+   zalloc must return Z_NULL if there is not enough memory for the object.
+   If zlib is used in a multi-threaded application, zalloc and zfree must be
+   thread safe.
+
+   On 16-bit systems, the functions zalloc and zfree must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this
+   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+   pointers returned by zalloc for objects of exactly 65536 bytes *must*
+   have their offset normalized to zero. The default allocation function
+   provided by this library ensures this (see zutil.c). To reduce memory
+   requirements and avoid any allocation of 64K objects, at the expense of
+   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+
+   The fields total_in and total_out can be used for statistics or
+   progress reports. After compression, total_in holds the total size of
+   the uncompressed data and may be saved for use in the decompressor
+   (particularly if the decompressor wants to decompress everything in
+   a single step).
+*/
+
+                        /* constants */
+
+#define Z_NO_FLUSH      0
+#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
+#define Z_SYNC_FLUSH    2
+#define Z_FULL_FLUSH    3
+#define Z_FINISH        4
+/* Allowed flush values; see deflate() below for details */
+
+#define Z_OK            0
+#define Z_STREAM_END    1
+#define Z_NEED_DICT     2
+#define Z_ERRNO        (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR   (-3)
+#define Z_MEM_ERROR    (-4)
+#define Z_BUF_ERROR    (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative
+ * values are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION         0
+#define Z_BEST_SPEED             1
+#define Z_BEST_COMPRESSION       9
+#define Z_DEFAULT_COMPRESSION  (-1)
+/* compression levels */
+
+#define Z_FILTERED            1
+#define Z_HUFFMAN_ONLY        2
+#define Z_DEFAULT_STRATEGY    0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY   0
+#define Z_ASCII    1
+#define Z_UNKNOWN  2
+/* Possible values of the data_type field */
+
+#define Z_DEFLATED   8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
+                        /* basic functions */
+
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+   If the first character differs, the library code actually used is
+   not compatible with the zlib.h header file used by the application.
+   This check is automatically made by deflateInit and inflateInit.
+ */
+
+/* 
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+
+     Initializes the internal stream state for compression. The fields
+   zalloc, zfree and opaque must be initialized before by the caller.
+   If zalloc and zfree are set to Z_NULL, deflateInit updates them to
+   use default allocation functions.
+
+     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+   1 gives best speed, 9 gives best compression, 0 gives no compression at
+   all (the input data is simply copied a block at a time).
+   Z_DEFAULT_COMPRESSION requests a default compromise between speed and
+   compression (currently equivalent to level 6).
+
+     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if level is not a valid compression level,
+   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+   with the version assumed by the caller (ZLIB_VERSION).
+   msg is set to null if there is no error message.  deflateInit does not
+   perform any compression: this will be done by deflate().
+*/
+
+
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+/*
+    deflate compresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may introduce some
+  output latency (reading input without producing any output) except when
+  forced to flush.
+
+    The detailed semantics are as follows. deflate performs one or both of the
+  following actions:
+
+  - Compress more input starting at next_in and update next_in and avail_in
+    accordingly. If not all input can be processed (because there is not
+    enough room in the output buffer), next_in and avail_in are updated and
+    processing will resume at this point for the next call of deflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly. This action is forced if the parameter flush is non zero.
+    Forcing flush frequently degrades the compression ratio, so this parameter
+    should be set only when necessary (in interactive applications).
+    Some output may be provided even if flush is not set.
+
+  Before the call of deflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming
+  more output, and updating avail_in or avail_out accordingly; avail_out
+  should never be zero before the call. The application can consume the
+  compressed output when it wants, for example when the output buffer is full
+  (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
+  and with zero avail_out, it must be called again after making room in the
+  output buffer because there might be more output pending.
+
+    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+  flushed to the output buffer and the output is aligned on a byte boundary, so
+  that the decompressor can get all input data available so far. (In particular
+  avail_in is zero after the call if enough output space has been provided
+  before the call.)  Flushing may degrade compression for some compression
+  algorithms and so it should be used only when necessary.
+
+    If flush is set to Z_FULL_FLUSH, all output is flushed as with
+  Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+  restart from this point if previous compressed data has been damaged or if
+  random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
+  the compression.
+
+    If deflate returns with avail_out == 0, this function must be called again
+  with the same value of the flush parameter and more output space (updated
+  avail_out), until the flush is complete (deflate returns with non-zero
+  avail_out).
+
+    If the parameter flush is set to Z_FINISH, pending input is processed,
+  pending output is flushed and deflate returns with Z_STREAM_END if there
+  was enough output space; if deflate returns with Z_OK, this function must be
+  called again with Z_FINISH and more output space (updated avail_out) but no
+  more input data, until it returns with Z_STREAM_END or an error. After
+  deflate has returned Z_STREAM_END, the only possible operations on the
+  stream are deflateReset or deflateEnd.
+  
+    Z_FINISH can be used immediately after deflateInit if all the compression
+  is to be done in a single step. In this case, avail_out must be at least
+  0.1% larger than avail_in plus 12 bytes.  If deflate does not return
+  Z_STREAM_END, then it must be called again as described above.
+
+    deflate() sets strm->adler to the adler32 checksum of all input read
+  so far (that is, total_in bytes).
+
+    deflate() may update data_type if it can make a good guess about
+  the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
+  binary. This field is only for information purposes and does not affect
+  the compression algorithm in any manner.
+
+    deflate() returns Z_OK if some progress has been made (more input
+  processed or more output produced), Z_STREAM_END if all input has been
+  consumed and all output has been produced (only when flush is set to
+  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
+  (for example avail_in or avail_out was zero).
+*/
+
+
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any
+   pending output.
+
+     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+   prematurely (some input or output was discarded). In the error case,
+   msg may be set but then points to a static string (which must not be
+   deallocated).
+*/
+
+
+/* 
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+
+     Initializes the internal stream state for decompression. The fields
+   next_in, avail_in, zalloc, zfree and opaque must be initialized before by
+   the caller. If next_in is not Z_NULL and avail_in is large enough (the exact
+   value depends on the compression method), inflateInit determines the
+   compression method from the zlib header and allocates all data structures
+   accordingly; otherwise the allocation will be deferred to the first call of
+   inflate.  If zalloc and zfree are set to Z_NULL, inflateInit updates them to
+   use default allocation functions.
+
+     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller.  msg is set to null if there is no error
+   message. inflateInit does not perform any decompression apart from reading
+   the zlib header if present: this will be done by inflate().  (So next_in and
+   avail_in may be modified, but next_out and avail_out are unchanged.)
+*/
+
+
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
+/*
+    inflate decompresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may some
+  introduce some output latency (reading input without producing any output)
+  except when forced to flush.
+
+  The detailed semantics are as follows. inflate performs one or both of the
+  following actions:
+
+  - Decompress more input starting at next_in and update next_in and avail_in
+    accordingly. If not all input can be processed (because there is not
+    enough room in the output buffer), next_in is updated and processing
+    will resume at this point for the next call of inflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly.  inflate() provides as much output as possible, until there
+    is no more input data or no more space in the output buffer (see below
+    about the flush parameter).
+
+  Before the call of inflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming
+  more output, and updating the next_* and avail_* values accordingly.
+  The application can consume the uncompressed output when it wants, for
+  example when the output buffer is full (avail_out == 0), or after each
+  call of inflate(). If inflate returns Z_OK and with zero avail_out, it
+  must be called again after making room in the output buffer because there
+  might be more output pending.
+
+    If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much
+  output as possible to the output buffer. The flushing behavior of inflate is
+  not specified for values of the flush parameter other than Z_SYNC_FLUSH
+  and Z_FINISH, but the current implementation actually flushes as much output
+  as possible anyway.
+
+    inflate() should normally be called until it returns Z_STREAM_END or an
+  error. However if all decompression is to be performed in a single step
+  (a single call of inflate), the parameter flush should be set to
+  Z_FINISH. In this case all pending input is processed and all pending
+  output is flushed; avail_out must be large enough to hold all the
+  uncompressed data. (The size of the uncompressed data may have been saved
+  by the compressor for this purpose.) The next operation on this stream must
+  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
+  is never required, but can be used to inform inflate that a faster routine
+  may be used for the single inflate() call.
+
+     If a preset dictionary is needed at this point (see inflateSetDictionary
+  below), inflate sets strm-adler to the adler32 checksum of the
+  dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise 
+  it sets strm->adler to the adler32 checksum of all output produced
+  so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or
+  an error code as described below. At the end of the stream, inflate()
+  checks that its computed adler32 checksum is equal to that saved by the
+  compressor and returns Z_STREAM_END only if the checksum is correct.
+
+    inflate() returns Z_OK if some progress has been made (more input processed
+  or more output produced), Z_STREAM_END if the end of the compressed data has
+  been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+  corrupted (input stream not conforming to the zlib format or incorrect
+  adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent
+  (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not
+  enough memory, Z_BUF_ERROR if no progress is possible or if there was not
+  enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR
+  case, the application may then call inflateSync to look for a good
+  compression block.
+*/
+
+
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any
+   pending output.
+
+     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+   was inconsistent. In the error case, msg may be set but then points to a
+   static string (which must not be deallocated).
+*/
+
+                        /* Advanced functions */
+
+/*
+    The following functions are needed only in some special applications.
+*/
+
+/*   
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+                                     int  level,
+                                     int  method,
+                                     int  windowBits,
+                                     int  memLevel,
+                                     int  strategy));
+
+     This is another version of deflateInit with more compression options. The
+   fields next_in, zalloc, zfree and opaque must be initialized before by
+   the caller.
+
+     The method parameter is the compression method. It must be Z_DEFLATED in
+   this version of the library.
+
+     The windowBits parameter is the base two logarithm of the window size
+   (the size of the history buffer).  It should be in the range 8..15 for this
+   version of the library. Larger values of this parameter result in better
+   compression at the expense of memory usage. The default value is 15 if
+   deflateInit is used instead.
+
+     The memLevel parameter specifies how much memory should be allocated
+   for the internal compression state. memLevel=1 uses minimum memory but
+   is slow and reduces compression ratio; memLevel=9 uses maximum memory
+   for optimal speed. The default value is 8. See zconf.h for total memory
+   usage as a function of windowBits and memLevel.
+
+     The strategy parameter is used to tune the compression algorithm. Use the
+   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+   filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
+   string match).  Filtered data consists mostly of small values with a
+   somewhat random distribution. In this case, the compression algorithm is
+   tuned to compress them better. The effect of Z_FILTERED is to force more
+   Huffman coding and less string matching; it is somewhat intermediate
+   between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
+   the compression ratio but not the correctness of the compressed output even
+   if it is not set appropriately.
+
+      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
+   method). msg is set to null if there is no error message.  deflateInit2 does
+   not perform any compression: this will be done by deflate().
+*/
+                            
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
+/*
+     Initializes the compression dictionary from the given byte sequence
+   without producing any compressed output. This function must be called
+   immediately after deflateInit, deflateInit2 or deflateReset, before any
+   call of deflate. The compressor and decompressor must use exactly the same
+   dictionary (see inflateSetDictionary).
+
+     The dictionary should consist of strings (byte sequences) that are likely
+   to be encountered later in the data to be compressed, with the most commonly
+   used strings preferably put towards the end of the dictionary. Using a
+   dictionary is most useful when the data to be compressed is short and can be
+   predicted with good accuracy; the data can then be compressed better than
+   with the default empty dictionary.
+
+     Depending on the size of the compression data structures selected by
+   deflateInit or deflateInit2, a part of the dictionary may in effect be
+   discarded, for example if the dictionary is larger than the window size in
+   deflate or deflate2. Thus the strings most likely to be useful should be
+   put at the end of the dictionary, not at the front.
+
+     Upon return of this function, strm->adler is set to the Adler32 value
+   of the dictionary; the decompressor may later use this value to determine
+   which dictionary has been used by the compressor. (The Adler32 value
+   applies to the whole dictionary even if only a subset of the dictionary is
+   actually used by the compressor.)
+
+     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+   parameter is invalid (such as NULL dictionary) or the stream state is
+   inconsistent (for example if deflate has already been called for this stream
+   or if the compression method is bsort). deflateSetDictionary does not
+   perform any compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when several compression strategies will be
+   tried, for example when there are several ways of pre-processing the input
+   data with a filter. The streams that will be discarded should then be freed
+   by calling deflateEnd.  Note that deflateCopy duplicates the internal
+   compression state which can be quite large, so this strategy is slow and
+   can consume lots of memory.
+
+     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being NULL). msg is left unchanged in both source and
+   destination.
+*/
+
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to deflateEnd followed by deflateInit,
+   but does not free and reallocate all the internal compression state.
+   The stream will keep the same compression level and any other attributes
+   that may have been set by deflateInit2.
+
+      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+				      int level,
+				      int strategy));
+/*
+     Dynamically update the compression level and compression strategy.  The
+   interpretation of level and strategy is as in deflateInit2.  This can be
+   used to switch between compression and straight copy of the input data, or
+   to switch to a different kind of input data requiring a different
+   strategy. If the compression level is changed, the input available so far
+   is compressed with the old level (and may be flushed); the new level will
+   take effect only at the next call of deflate().
+
+     Before the call of deflateParams, the stream state must be set as for
+   a call of deflate(), since the currently available input may have to
+   be compressed and flushed. In particular, strm->avail_out must be non-zero.
+
+     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
+   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
+   if strm->avail_out was zero.
+*/
+
+/*   
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
+                                     int  windowBits));
+
+     This is another version of inflateInit with an extra parameter. The
+   fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+   before by the caller.
+
+     The windowBits parameter is the base two logarithm of the maximum window
+   size (the size of the history buffer).  It should be in the range 8..15 for
+   this version of the library. The default value is 15 if inflateInit is used
+   instead. If a compressed stream with a larger window size is given as
+   input, inflate() will return with the error code Z_DATA_ERROR instead of
+   trying to allocate a larger window.
+
+      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
+   memLevel). msg is set to null if there is no error message.  inflateInit2
+   does not perform any decompression apart from reading the zlib header if
+   present: this will be done by inflate(). (So next_in and avail_in may be
+   modified, but next_out and avail_out are unchanged.)
+*/
+
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
+/*
+     Initializes the decompression dictionary from the given uncompressed byte
+   sequence. This function must be called immediately after a call of inflate
+   if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
+   can be determined from the Adler32 value returned by this call of
+   inflate. The compressor and decompressor must use exactly the same
+   dictionary (see deflateSetDictionary).
+
+     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+   parameter is invalid (such as NULL dictionary) or the stream state is
+   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+   expected one (incorrect Adler32 value). inflateSetDictionary does not
+   perform any decompression: this will be done by subsequent calls of
+   inflate().
+*/
+
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
+/* 
+    Skips invalid compressed data until a full flush point (see above the
+  description of deflate with Z_FULL_FLUSH) can be found, or until all
+  available input is skipped. No output is provided.
+
+    inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
+  if no more input was provided, Z_DATA_ERROR if no flush point has been found,
+  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
+  case, the application may save the current current value of total_in which
+  indicates where valid compressed data was found. In the error case, the
+  application may repeatedly call inflateSync, providing more input each time,
+  until success or end of the input data.
+*/
+
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to inflateEnd followed by inflateInit,
+   but does not free and reallocate all the internal decompression state.
+   The stream will keep attributes that may have been set by inflateInit2.
+
+      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+
+                        /* utility functions */
+
+/*
+     The following utility functions are implemented on top of the
+   basic stream-oriented functions. To simplify the interface, some
+   default options are assumed (compression level and memory usage,
+   standard memory allocation functions). The source code of these
+   utility functions can easily be modified if you need special options.
+*/
+
+ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
+                                 const Bytef *source, uLong sourceLen));
+/*
+     Compresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer. Upon entry, destLen is the total
+   size of the destination buffer, which must be at least 0.1% larger than
+   sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
+   compressed buffer.
+     This function can be used to compress a whole file at once if the
+   input file is mmap'ed.
+     compress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer.
+*/
+
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
+                                  const Bytef *source, uLong sourceLen,
+                                  int level));
+/*
+     Compresses the source buffer into the destination buffer. The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer. Upon entry, destLen is the total size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
+                                   const Bytef *source, uLong sourceLen));
+/*
+     Decompresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer. Upon entry, destLen is the total
+   size of the destination buffer, which must be large enough to hold the
+   entire uncompressed data. (The size of the uncompressed data must have
+   been saved previously by the compressor and transmitted to the decompressor
+   by some mechanism outside the scope of this compression library.)
+   Upon exit, destLen is the actual size of the compressed buffer.
+     This function can be used to decompress a whole file at once if the
+   input file is mmap'ed.
+
+     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer, or Z_DATA_ERROR if the input data was corrupted.
+*/
+
+
+typedef voidp gzFile;
+
+ZEXTERN gzFile ZEXPORT gzopen  OF((const char *path, const char *mode));
+/*
+     Opens a gzip (.gz) file for reading or writing. The mode parameter
+   is as in fopen ("rb" or "wb") but can also include a compression level
+   ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
+   Huffman only compression as in "wb1h". (See the description
+   of deflateInit2 for more information about the strategy parameter.)
+
+     gzopen can be used to read a file which is not in gzip format; in this
+   case gzread will directly read from the file without decompression.
+
+     gzopen returns NULL if the file could not be opened or if there was
+   insufficient memory to allocate the (de)compression state; errno
+   can be checked to distinguish the two cases (if errno is zero, the
+   zlib error is Z_MEM_ERROR).  */
+
+ZEXTERN gzFile ZEXPORT gzdopen  OF((int fd, const char *mode));
+/*
+     gzdopen() associates a gzFile with the file descriptor fd.  File
+   descriptors are obtained from calls like open, dup, creat, pipe or
+   fileno (in the file has been previously opened with fopen).
+   The mode parameter is as in gzopen.
+     The next call of gzclose on the returned gzFile will also close the
+   file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
+   descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
+     gzdopen returns NULL if there was insufficient memory to allocate
+   the (de)compression state.
+*/
+
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+/*
+     Dynamically update the compression level or strategy. See the description
+   of deflateInit2 for the meaning of these parameters.
+     gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
+   opened for writing.
+*/
+
+ZEXTERN int ZEXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
+/*
+     Reads the given number of uncompressed bytes from the compressed file.
+   If the input file was not in gzip format, gzread copies the given number
+   of bytes into the buffer.
+     gzread returns the number of uncompressed bytes actually read (0 for
+   end of file, -1 for error). */
+
+ZEXTERN int ZEXPORT    gzwrite OF((gzFile file, 
+				   const voidp buf, unsigned len));
+/*
+     Writes the given number of uncompressed bytes into the compressed file.
+   gzwrite returns the number of uncompressed bytes actually written
+   (0 in case of error).
+*/
+
+ZEXTERN int ZEXPORTVA   gzprintf OF((gzFile file, const char *format, ...));
+/*
+     Converts, formats, and writes the args to the compressed file under
+   control of the format string, as in fprintf. gzprintf returns the number of
+   uncompressed bytes actually written (0 in case of error).
+*/
+
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+      Writes the given null-terminated string to the compressed file, excluding
+   the terminating null character.
+      gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+      Reads bytes from the compressed file until len-1 characters are read, or
+   a newline character is read and transferred to buf, or an end-of-file
+   condition is encountered.  The string is then terminated with a null
+   character.
+      gzgets returns buf, or Z_NULL in case of error.
+*/
+
+ZEXTERN int ZEXPORT    gzputc OF((gzFile file, int c));
+/*
+      Writes c, converted to an unsigned char, into the compressed file.
+   gzputc returns the value that was written, or -1 in case of error.
+*/
+
+ZEXTERN int ZEXPORT    gzgetc OF((gzFile file));
+/*
+      Reads one byte from the compressed file. gzgetc returns this byte
+   or -1 in case of end of file or error.
+*/
+
+ZEXTERN int ZEXPORT    gzflush OF((gzFile file, int flush));
+/*
+     Flushes all pending output into the compressed file. The parameter
+   flush is as in the deflate() function. The return value is the zlib
+   error number (see function gzerror below). gzflush returns Z_OK if
+   the flush parameter is Z_FINISH and all output could be flushed.
+     gzflush should be called only when strictly necessary because it can
+   degrade compression.
+*/
+
+ZEXTERN z_off_t ZEXPORT    gzseek OF((gzFile file,
+				      z_off_t offset, int whence));
+/* 
+      Sets the starting position for the next gzread or gzwrite on the
+   given compressed file. The offset represents a number of bytes in the
+   uncompressed data stream. The whence parameter is defined as in lseek(2);
+   the value SEEK_END is not supported.
+     If the file is opened for reading, this function is emulated but can be
+   extremely slow. If the file is opened for writing, only forward seeks are
+   supported; gzseek then compresses a sequence of zeroes up to the new
+   starting position.
+
+      gzseek returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error, in
+   particular if the file is opened for writing and the new starting position
+   would be before the current position.
+*/
+
+ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
+/*
+     Rewinds the given file. This function is supported only for reading.
+
+   gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+*/
+
+ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
+/*
+     Returns the starting position for the next gzread or gzwrite on the
+   given compressed file. This position represents a number of bytes in the
+   uncompressed data stream.
+
+   gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
+/*
+     Returns 1 when EOF has previously been detected reading the given
+   input stream, otherwise zero.
+*/
+
+ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
+/*
+     Flushes all pending output if necessary, closes the compressed file
+   and deallocates all the (de)compression state. The return value is the zlib
+   error number (see function gzerror below).
+*/
+
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+/*
+     Returns the error message for the last error which occurred on the
+   given compressed file. errnum is set to zlib error number. If an
+   error occurred in the file system and not in the compression library,
+   errnum is set to Z_ERRNO and the application may consult errno
+   to get the exact error code.
+*/
+
+                        /* checksum functions */
+
+/*
+     These functions are not related to compression but are exported
+   anyway because they might be useful in applications using the
+   compression library.
+*/
+
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+
+/*
+     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+   return the updated checksum. If buf is NULL, this function returns
+   the required initial value for the checksum.
+   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+   much faster. Usage example:
+
+     uLong adler = adler32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       adler = adler32(adler, buffer, length);
+     }
+     if (adler != original_adler) error();
+*/
+
+ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
+/*
+     Update a running crc with the bytes buf[0..len-1] and return the updated
+   crc. If buf is NULL, this function returns the required initial value
+   for the crc. Pre- and post-conditioning (one's complement) is performed
+   within this function so it shouldn't be done by the application.
+   Usage example:
+
+     uLong crc = crc32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       crc = crc32(crc, buffer, length);
+     }
+     if (crc != original_crc) error();
+*/
+
+
+                        /* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
+                                      int windowBits, int memLevel,
+                                      int strategy, const char *version,
+                                      int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
+                                      const char *version, int stream_size));
+#define deflateInit(strm, level) \
+        deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit(strm) \
+        inflateInit_((strm),                ZLIB_VERSION, sizeof(z_stream))
+#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+        deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                      (strategy),           ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit2(strm, windowBits) \
+        inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+
+
+#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
+    struct internal_state {int dummy;}; /* hack for buggy compilers */
+#endif
+
+ZEXTERN const char   * ZEXPORT zError           OF((int err));
+ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp z));
+ZEXTERN const uLongf * ZEXPORT get_crc_table    OF((void));
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _ZLIB_H */
diff --git a/nx-X11/extras/zlib/zlib.html b/nx-X11/extras/zlib/zlib.html
new file mode 100644
index 000000000..c34370386
--- /dev/null
+++ b/nx-X11/extras/zlib/zlib.html
@@ -0,0 +1,971 @@
+<html>
+<head>
+ <title>
+ zlib general purpose compression library version 1.1.4
+ </title>
+</head>
+<body bgcolor="White" text="Black" vlink="Red" alink="Navy" link="Red">
+<!-- background="zlibbg.gif" -->
+
+<h1> zlib 1.1.4 Manual </h1>
+<hr>
+<a name="Contents"><h2>Contents</h2>
+<ol type="I">
+<li> <a href="#Prologue">Prologue</a>
+<li> <a href="#Introduction">Introduction</a>
+<li> <a href="#Utility functions">Utility functions</a>
+<li> <a href="#Basic functions">Basic functions</a>
+<li> <a href="#Advanced functions">Advanced functions</a>
+<li> <a href="#Constants">Constants</a>
+<li> <a href="#struct z_stream_s">struct z_stream_s</a>
+<li> <a href="#Checksum functions">Checksum functions</a>
+<li> <a href="#Misc">Misc</a>
+</ol>
+<hr>
+<a name="Prologue"><h2> Prologue </h2>
+  'zlib' general purpose compression library version 1.1.4, March 11th, 2002
+  <p>
+  Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
+  <p>
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+  <p>
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+  <ol>
+   <li> The origin of this software must not be misrepresented ; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+   <li> Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+   <li> This notice may not be removed or altered from any source distribution.
+  </ol>
+
+  <dl>
+  <dt>Jean-loup Gailly        
+  <dd><a href="mailto:jloup@gzip.org">jloup@gzip.org</a>
+  <dt>Mark Adler
+  <dd><a href="mailto:madler@alumni.caltech.edu">madler@alumni.caltech.edu</a>
+  </dl>
+
+  The data format used by the zlib library is described by RFCs (Request for
+  Comments) 1950 to 1952 in the files
+  <a href="ftp://ds.internic.net/rfc/rfc1950.txt">
+  ftp://ds.internic.net/rfc/rfc1950.txt </a>
+  (zlib format), 
+  <a href="ftp://ds.internic.net/rfc/rfc1951.txt">
+  rfc1951.txt </a>
+  (<a href="#deflate">deflate</a> format) and 
+  <a href="ftp://ds.internic.net/rfc/rfc1952.txt">
+  rfc1952.txt </a>
+  (gzip format).
+  <p>
+  This manual is converted from zlib.h by 
+  <a href="mailto:piaip@csie.ntu.edu.tw"> piaip </a>
+  <p>
+  Visit <a href="http://ftp.cdrom.com/pub/infozip/zlib/">
+  http://ftp.cdrom.com/pub/infozip/zlib/</a> 
+  for the official zlib web page.
+  <p>
+
+<hr>
+<a name="Introduction"><h2> Introduction </h2>
+     The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed
+  data.  This version of the library supports only one compression method
+  (deflation) but other algorithms will be added later and will have the same
+  stream interface.
+  <p>
+
+     Compression can be done in a single step if the buffers are large
+  enough (for example if an input file is mmap'ed), or can be done by
+  repeated calls of the compression function.  In the latter case, the
+  application must provide more input and/or consume the output
+  (providing more output space) before each call.
+  <p>
+
+     The library also supports reading and writing files in gzip (.gz) format
+  with an interface similar to that of stdio.
+  <p>
+
+     The library does not install any signal handler. The decoder checks
+  the consistency of the compressed data, so the library should never
+  crash even in case of corrupted input.
+  <p>
+
+<hr>
+<a name="Utility functions"><h2> Utility functions </h2>
+     The following utility functions are implemented on top of the
+   <a href="#Basic functions">basic stream-oriented functions</a>. 
+   To simplify the interface, some
+   default options are assumed (compression level and memory usage,
+   standard memory allocation functions). The source code of these
+   utility functions can easily be modified if you need special options.
+<h3> Function list </h3>
+<ul>
+<li> int  <a href="#compress">compress</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen);
+<li> int  <a href="#compress2">compress2</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen, int level);
+<li> int  <a href="#uncompress">uncompress</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen);
+<li> typedef voidp gzFile;
+<li>  gzFile  <a href="#gzopen">gzopen</a>  (const char *path, const char *mode);
+<li> gzFile  <a href="#gzdopen">gzdopen</a>  (int fd, const char *mode);
+<li> int  <a href="#gzsetparams">gzsetparams</a> (gzFile file, int level, int strategy);
+<li> int     <a href="#gzread">gzread</a>  (gzFile file, voidp buf, unsigned len);
+<li> int     <a href="#gzwrite">gzwrite</a> (gzFile file, const voidp buf, unsigned len);
+<li> int VA   <a href="#gzprintf">gzprintf</a> (gzFile file, const char *format, ...);
+<li> int  <a href="#gzputs">gzputs</a> (gzFile file, const char *s);
+<li> char *  <a href="#gzgets">gzgets</a> (gzFile file, char *buf, int len);
+<li> int     <a href="#gzputc">gzputc</a> (gzFile file, int c);
+<li> int     <a href="#gzgetc">gzgetc</a> (gzFile file);
+<li> int     <a href="#gzflush">gzflush</a> (gzFile file, int flush);
+<li> z_off_t     <a href="#gzseek">gzseek</a> (gzFile file, z_off_t offset, int whence);
+<li> z_off_t     <a href="#gztell">gztell</a> (gzFile file);
+<li> int     <a href="#gzrewind">gzrewind</a> (gzFile file);
+<li> int  <a href="#gzeof">gzeof</a> (gzFile file);
+<li> int     <a href="#gzclose">gzclose</a> (gzFile file);
+<li> const char *  <a href="#gzerror">gzerror</a> (gzFile file, int *errnum);
+</ul>
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt> int  <a name="compress">compress</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen);</font>
+<dd>
+     Compresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer. Upon entry, destLen is the total
+   size of the destination buffer, which must be at least 0.1% larger than
+   sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
+   compressed buffer.<p>
+     This function can be used to <a href="#compress">compress</a> a whole file at once if the
+   input file is mmap'ed.<p>
+     <a href="#compress">compress</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+   enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output
+   buffer.<p>
+
+<font color="Blue"><dt> int  <a name="compress2">compress2</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen, int level);</font>
+<dd>
+     Compresses the source buffer into the destination buffer. The level
+   parameter has the same meaning as in <a href="#deflateInit">deflateInit</a>.  sourceLen is the byte
+   length of the source buffer. Upon entry, destLen is the total size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+   <p>
+
+     <a href="#compress2">compress2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+   memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output buffer,
+   <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the level parameter is invalid.
+   <p>
+
+<font color="Blue"><dt> int  <a name="uncompress">uncompress</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen);</font>
+<dd>
+     Decompresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer. Upon entry, destLen is the total
+   size of the destination buffer, which must be large enough to hold the
+   entire uncompressed data. (The size of the uncompressed data must have
+   been saved previously by the compressor and transmitted to the decompressor
+   by some mechanism outside the scope of this compression library.)
+   Upon exit, destLen is the actual size of the compressed buffer. <p>
+     This function can be used to decompress a whole file at once if the
+   input file is mmap'ed.
+   <p>
+
+     <a href="#uncompress">uncompress</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+   enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output
+   buffer, or <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the input data was corrupted.
+   <p>
+
+<dt> typedef voidp gzFile;
+<dd> <p>
+
+<font color="Blue"><dt>  gzFile  <a name="gzopen">gzopen</a>  (const char *path, const char *mode);</font>
+<dd>
+     Opens a gzip (.gz) file for reading or writing. The mode parameter
+   is as in fopen ("rb" or "wb") but can also include a compression level
+   ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
+   Huffman only compression as in "wb1h". (See the description
+   of <a href="#deflateInit2">deflateInit2</a> for more information about the strategy parameter.)
+   <p>
+
+     <a href="#gzopen">gzopen</a> can be used to read a file which is not in gzip format ; in this
+   case <a href="#gzread">gzread</a> will directly read from the file without decompression.
+   <p>
+
+     <a href="#gzopen">gzopen</a> returns NULL if the file could not be opened or if there was
+   insufficient memory to allocate the (de)compression <a href="#state">state</a> ; errno
+   can be checked to distinguish the two cases (if errno is zero, the
+   zlib error is <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a>).
+   <p>
+
+<font color="Blue"><dt> gzFile  <a name="gzdopen">gzdopen</a>  (int fd, const char *mode);</font>
+<dd>
+     <a href="#gzdopen">gzdopen</a>() associates a gzFile with the file descriptor fd.  File
+   descriptors are obtained from calls like open, dup, creat, pipe or
+   fileno (in the file has been previously opened with fopen).
+   The mode parameter is as in <a href="#gzopen">gzopen</a>.
+   <p>
+     The next call of <a href="#gzclose">gzclose</a> on the returned gzFile will also close the
+   file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
+   descriptor fd. If you want to keep fd open, use <a href="#gzdopen">gzdopen</a>(dup(fd), mode).
+   <p>
+     <a href="#gzdopen">gzdopen</a> returns NULL if there was insufficient memory to allocate
+   the (de)compression <a href="#state">state</a>.
+   <p>
+
+<font color="Blue"><dt> int  <a name="gzsetparams">gzsetparams</a> (gzFile file, int level, int strategy);</font>
+<dd>
+     Dynamically update the compression level or strategy. See the description
+   of <a href="#deflateInit2">deflateInit2</a> for the meaning of these parameters.
+   <p>
+     <a href="#gzsetparams">gzsetparams</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the file was not
+   opened for writing.
+   <p>
+
+<font color="Blue"><dt> int     <a name="gzread">gzread</a>  (gzFile file, voidp buf, unsigned len);</font>
+<dd>
+     Reads the given number of uncompressed bytes from the compressed file.
+   If the input file was not in gzip format, <a href="#gzread">gzread</a> copies the given number
+   of bytes into the buffer.
+   <p>
+     <a href="#gzread">gzread</a> returns the number of uncompressed bytes actually read (0 for
+   end of file, -1 for error).
+   <p>
+
+<font color="Blue"><dt> int     <a name="gzwrite">gzwrite</a> (gzFile file, const voidp buf, unsigned len);</font>
+<dd>
+     Writes the given number of uncompressed bytes into the compressed file.
+   <a href="#gzwrite">gzwrite</a> returns the number of uncompressed bytes actually written
+   (0 in case of error).
+   <p>
+
+<font color="Blue"><dt> int VA   <a name="gzprintf">gzprintf</a> (gzFile file, const char *format, ...);</font>
+<dd>
+     Converts, formats, and writes the args to the compressed file under
+   control of the format string, as in fprintf. <a href="#gzprintf">gzprintf</a> returns the number of
+   uncompressed bytes actually written (0 in case of error).
+   <p>
+
+<font color="Blue"><dt> int  <a name="gzputs">gzputs</a> (gzFile file, const char *s);</font>
+<dd>
+      Writes the given null-terminated string to the compressed file, excluding
+   the terminating null character.
+   <p>
+      <a href="#gzputs">gzputs</a> returns the number of characters written, or -1 in case of error.
+      <p>
+
+<font color="Blue"><dt> char *  <a name="gzgets">gzgets</a> (gzFile file, char *buf, int len);</font>
+<dd>
+      Reads bytes from the compressed file until len-1 characters are read, or
+   a newline character is read and transferred to buf, or an end-of-file
+   condition is encountered.  The string is then terminated with a null
+   character.
+   <p>
+      <a href="#gzgets">gzgets</a> returns buf, or <a href="#Z_NULL">Z_NULL</a> in case of error.
+      <p>
+
+<font color="Blue"><dt> int     <a name="gzputc">gzputc</a> (gzFile file, int c);</font>
+<dd>
+      Writes c, converted to an unsigned char, into the compressed file.
+   <a href="#gzputc">gzputc</a> returns the value that was written, or -1 in case of error.
+   <p>
+
+<font color="Blue"><dt> int     <a name="gzgetc">gzgetc</a> (gzFile file);</font>
+<dd>
+      Reads one byte from the compressed file. <a href="#gzgetc">gzgetc</a> returns this byte
+   or -1 in case of end of file or error.
+   <p>
+
+<font color="Blue"><dt> int     <a name="gzflush">gzflush</a> (gzFile file, int flush);</font>
+<dd>
+     Flushes all pending output into the compressed file. The parameter
+   flush is as in the <a href="#deflate">deflate</a>() function. The return value is the zlib
+   error number (see function <a href="#gzerror">gzerror</a> below). <a href="#gzflush">gzflush</a> returns <a href="#Z_OK">Z_OK</a> if
+   the flush parameter is <a href="#Z_FINISH">Z_FINISH</a> and all output could be flushed.
+   <p>
+     <a href="#gzflush">gzflush</a> should be called only when strictly necessary because it can
+   degrade compression.
+   <p>
+
+<font color="Blue"><dt> z_off_t     <a name="gzseek">gzseek</a> (gzFile file, z_off_t offset, int whence);</font>
+<dd>
+      Sets the starting position for the next <a href="#gzread">gzread</a> or <a href="#gzwrite">gzwrite</a> on the
+   given compressed file. The offset represents a number of bytes in the
+   uncompressed data stream. The whence parameter is defined as in lseek(2);
+   the value SEEK_END is not supported.
+   <p>
+     If the file is opened for reading, this function is emulated but can be
+   extremely slow. If the file is opened for writing, only forward seeks are
+   supported ; <a href="#gzseek">gzseek</a> then compresses a sequence of zeroes up to the new
+   starting position.
+   <p>
+      <a href="#gzseek">gzseek</a> returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error, in
+   particular if the file is opened for writing and the new starting position
+   would be before the current position.
+   <p>
+
+<font color="Blue"><dt> int     <a name="gzrewind">gzrewind</a> (gzFile file);</font>
+<dd>
+     Rewinds the given file. This function is supported only for reading.
+     <p>
+   <a href="#gzrewind">gzrewind</a>(file) is equivalent to (int)<a href="#gzseek">gzseek</a>(file, 0L, SEEK_SET)
+   <p>
+
+<font color="Blue"><dt> z_off_t     <a name="gztell">gztell</a> (gzFile file);</font>
+<dd>
+     Returns the starting position for the next <a href="#gzread">gzread</a> or <a href="#gzwrite">gzwrite</a> on the
+   given compressed file. This position represents a number of bytes in the
+   uncompressed data stream.
+   <p>
+
+   <a href="#gztell">gztell</a>(file) is equivalent to <a href="#gzseek">gzseek</a>(file, 0L, SEEK_CUR)
+   <p>
+
+<font color="Blue"><dt> int  <a name="gzeof">gzeof</a> (gzFile file);</font>
+<dd>
+     Returns 1 when EOF has previously been detected reading the given
+   input stream, otherwise zero.
+   <p>
+
+<font color="Blue"><dt> int     <a name="gzclose">gzclose</a> (gzFile file);</font>
+<dd>
+     Flushes all pending output if necessary, closes the compressed file
+   and deallocates all the (de)compression <a href="#state">state</a>. The return value is the zlib
+   error number (see function <a href="#gzerror">gzerror</a> below).
+   <p>
+
+<font color="Blue"><dt> const char *  <a name="gzerror">gzerror</a> (gzFile file, int *errnum);</font>
+<dd>
+     Returns the error message for the last error which occurred on the
+   given compressed file. errnum is set to zlib error number. If an
+   error occurred in the file system and not in the compression library,
+   errnum is set to <a href="#Z_ERRNO">Z_ERRNO</a> and the application may consult errno
+   to get the exact error code.
+   <p>
+</dl>
+<hr>
+<a name="Basic functions"><h2> Basic functions </h2>
+<h3> Function list </h3>
+<ul>
+<li>  const char *  <a href="#zlibVersion">zlibVersion</a> (void);
+<li>  int  <a href="#deflateInit">deflateInit</a> (<a href="#z_streamp">z_streamp</a> strm, int level);
+<li>  int  <a href="#deflate">deflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);
+<li>  int  <a href="#deflateEnd">deflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li>  int  <a href="#inflateInit">inflateInit</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li>  int  <a href="#inflate">inflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);
+<li>  int  <a href="#inflateEnd">inflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);
+</ul>
+
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt>  const char *  <a name="zlibVersion">zlibVersion</a> (void);</font>
+<dd> The application can compare <a href="#zlibVersion">zlibVersion</a> and ZLIB_VERSION for consistency.
+   If the first character differs, the library code actually used is
+   not compatible with the zlib.h header file used by the application.
+   This check is automatically made by <a href="#deflateInit">deflateInit</a> and <a href="#inflateInit">inflateInit</a>.
+   <p>
+
+<font color="Blue"><dt> int  <a name="deflateInit">deflateInit</a> (<a href="#z_streamp">z_streamp</a> strm, int level);</font>
+<dd>
+     Initializes the internal stream <a href="#state">state</a> for compression. The fields
+   <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by the caller.
+   If <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> are set to <a href="#Z_NULL">Z_NULL</a>, <a href="#deflateInit">deflateInit</a> updates them to
+   use default allocation functions.
+   <p>
+
+     The compression level must be <a href="#Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a>, or between 0 and 9:
+   1 gives best speed, 9 gives best compression, 0 gives no compression at
+   all (the input data is simply copied a block at a time).
+   <p>
+
+   <a href="#Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a> requests a default compromise between speed and
+   compression (currently equivalent to level 6).
+   <p>
+
+     <a href="#deflateInit">deflateInit</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+   enough memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if level is not a valid compression level,
+   <a href="#Z_VERSION_ERROR">Z_VERSION_ERROR</a> if the zlib library version (<a href="#zlib_version">zlib_version</a>) is incompatible
+   with the version assumed by the caller (ZLIB_VERSION).
+   <a href="#msg">msg</a> is set to null if there is no error message.  <a href="#deflateInit">deflateInit</a> does not
+   perform any compression: this will be done by <a href="#deflate">deflate</a>().
+   <p>
+
+<font color="Blue"><dt>  int  <a name="deflate">deflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);</font>
+<dd>
+    <a href="#deflate">deflate</a> compresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may introduce some
+  output latency (reading input without producing any output) except when
+  forced to flush.<p>
+
+    The detailed semantics are as follows. <a href="#deflate">deflate</a> performs one or both of the
+  following actions:
+
+  <ul>
+  <li> Compress more input starting at <a href="#next_in">next_in</a> and update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a>
+    accordingly. If not all input can be processed (because there is not
+    enough room in the output buffer), <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> are updated and
+    processing will resume at this point for the next call of <a href="#deflate">deflate</a>().
+
+  <li> 
+    Provide more output starting at <a href="#next_out">next_out</a> and update <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a>
+    accordingly. This action is forced if the parameter flush is non zero.
+    Forcing flush frequently degrades the compression ratio, so this parameter
+    should be set only when necessary (in interactive applications).
+    Some output may be provided even if flush is not set.
+  </ul> <p>
+
+  Before the call of <a href="#deflate">deflate</a>(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming
+  more output, and updating <a href="#avail_in">avail_in</a> or <a href="#avail_out">avail_out</a> accordingly ; <a href="#avail_out">avail_out</a>
+  should never be zero before the call. The application can consume the
+  compressed output when it wants, for example when the output buffer is full
+  (<a href="#avail_out">avail_out</a> == 0), or after each call of <a href="#deflate">deflate</a>(). If <a href="#deflate">deflate</a> returns <a href="#Z_OK">Z_OK</a>
+  and with zero <a href="#avail_out">avail_out</a>, it must be called again after making room in the
+  output buffer because there might be more output pending.
+  <p>
+
+    If the parameter flush is set to <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, all pending output is
+  flushed to the output buffer and the output is aligned on a byte boundary, so
+  that the decompressor can get all input data available so far. (In particular
+  <a href="#avail_in">avail_in</a> is zero after the call if enough output space has been provided
+  before the call.)  Flushing may degrade compression for some compression
+  algorithms and so it should be used only when necessary.
+  <p>
+
+    If flush is set to <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a>, all output is flushed as with
+  <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, and the compression <a href="#state">state</a> is reset so that decompression can
+  restart from this point if previous compressed data has been damaged or if
+  random access is desired. Using <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a> too often can seriously degrade
+  the compression.
+  <p>
+
+    If <a href="#deflate">deflate</a> returns with <a href="#avail_out">avail_out</a> == 0, this function must be called again
+  with the same value of the flush parameter and more output space (updated
+  <a href="#avail_out">avail_out</a>), until the flush is complete (<a href="#deflate">deflate</a> returns with non-zero
+  <a href="#avail_out">avail_out</a>).
+  <p>
+
+    If the parameter flush is set to <a href="#Z_FINISH">Z_FINISH</a>, pending input is processed,
+  pending output is flushed and <a href="#deflate">deflate</a> returns with <a href="#Z_STREAM_END">Z_STREAM_END</a> if there
+  was enough output space ; if <a href="#deflate">deflate</a> returns with <a href="#Z_OK">Z_OK</a>, this function must be
+  called again with <a href="#Z_FINISH">Z_FINISH</a> and more output space (updated <a href="#avail_out">avail_out</a>) but no
+  more input data, until it returns with <a href="#Z_STREAM_END">Z_STREAM_END</a> or an error. After
+  <a href="#deflate">deflate</a> has returned <a href="#Z_STREAM_END">Z_STREAM_END</a>, the only possible operations on the
+  stream are <a href="#deflateReset">deflateReset</a> or <a href="#deflateEnd">deflateEnd</a>.
+  <p>
+  
+    <a href="#Z_FINISH">Z_FINISH</a> can be used immediately after <a href="#deflateInit">deflateInit</a> if all the compression
+  is to be done in a single step. In this case, <a href="#avail_out">avail_out</a> must be at least
+  0.1% larger than <a href="#avail_in">avail_in</a> plus 12 bytes.  If <a href="#deflate">deflate</a> does not return
+  <a href="#Z_STREAM_END">Z_STREAM_END</a>, then it must be called again as described above.
+  <p>
+
+    <a href="#deflate">deflate</a>() sets strm-&gt <a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of all input read
+  so far (that is, <a href="#total_in">total_in</a> bytes).
+  <p>
+
+    <a href="#deflate">deflate</a>() may update <a href="#data_type">data_type</a> if it can make a good guess about
+  the input data type (<a href="#Z_ASCII">Z_ASCII</a> or <a href="#Z_BINARY">Z_BINARY</a>). In doubt, the data is considered
+  binary. This field is only for information purposes and does not affect
+  the compression algorithm in any manner.
+  <p>
+
+    <a href="#deflate">deflate</a>() returns <a href="#Z_OK">Z_OK</a> if some progress has been made (more input
+  processed or more output produced), <a href="#Z_STREAM_END">Z_STREAM_END</a> if all input has been
+  consumed and all output has been produced (only when flush is set to
+  <a href="#Z_FINISH">Z_FINISH</a>), <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream <a href="#state">state</a> was inconsistent (for example
+  if <a href="#next_in">next_in</a> or <a href="#next_out">next_out</a> was NULL), <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if no progress is possible
+  (for example <a href="#avail_in">avail_in</a> or <a href="#avail_out">avail_out</a> was zero).
+  <p>
+
+<font color="Blue"><dt>  int  <a name="deflateEnd">deflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any
+   pending output.
+   <p>
+
+     <a href="#deflateEnd">deflateEnd</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the
+   stream <a href="#state">state</a> was inconsistent, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the stream was freed
+   prematurely (some input or output was discarded). In the error case,
+   <a href="#msg">msg</a> may be set but then points to a static string (which must not be
+   deallocated).
+   <p>
+
+<font color="Blue"><dt>  int  <a name="inflateInit">inflateInit</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>     
+	Initializes the internal stream <a href="#state">state</a> for decompression. The fields
+   <a href="#next_in">next_in</a>, <a href="#avail_in">avail_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by
+   the caller. If <a href="#next_in">next_in</a> is not <a href="#Z_NULL">Z_NULL</a> and <a href="#avail_in">avail_in</a> is large enough (the exact
+   value depends on the compression method), <a href="#inflateInit">inflateInit</a> determines the
+   compression method from the zlib header and allocates all data structures
+   accordingly ; otherwise the allocation will be deferred to the first call of
+   <a href="#inflate">inflate</a>.  If <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> are set to <a href="#Z_NULL">Z_NULL</a>, <a href="#inflateInit">inflateInit</a> updates them to
+   use default allocation functions.
+   <p>
+
+     <a href="#inflateInit">inflateInit</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+   memory, <a href="#Z_VERSION_ERROR">Z_VERSION_ERROR</a> if the zlib library version is incompatible with the
+   version assumed by the caller.  <a href="#msg">msg</a> is set to null if there is no error
+   message. <a href="#inflateInit">inflateInit</a> does not perform any decompression apart from reading
+   the zlib header if present: this will be done by <a href="#inflate">inflate</a>().  (So <a href="#next_in">next_in</a> and
+   <a href="#avail_in">avail_in</a> may be modified, but <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> are unchanged.)
+   <p>
+
+<font color="Blue"><dt>  int  <a name="inflate">inflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);</font>
+<dd>
+    <a href="#inflate">inflate</a> decompresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may some
+  introduce some output latency (reading input without producing any output)
+  except when forced to flush.
+  <p>
+
+  The detailed semantics are as follows. <a href="#inflate">inflate</a> performs one or both of the
+  following actions:
+
+  <ul>
+  <li> Decompress more input starting at <a href="#next_in">next_in</a> and update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a>
+    accordingly. If not all input can be processed (because there is not
+    enough room in the output buffer), <a href="#next_in">next_in</a> is updated and processing
+    will resume at this point for the next call of <a href="#inflate">inflate</a>().
+
+  <li> Provide more output starting at <a href="#next_out">next_out</a> and update <a href="#next_out">next_out</a> and 
+    <a href="#avail_out">avail_out</a> accordingly.  <a href="#inflate">inflate</a>() provides as much output as possible, 
+    until there is no more input data or no more space in the output buffer 
+    (see below about the flush parameter).
+  </ul> <p>
+
+  Before the call of <a href="#inflate">inflate</a>(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming
+  more output, and updating the next_* and avail_* values accordingly.
+  The application can consume the uncompressed output when it wants, for
+  example when the output buffer is full (<a href="#avail_out">avail_out</a> == 0), or after each
+  call of <a href="#inflate">inflate</a>(). If <a href="#inflate">inflate</a> returns <a href="#Z_OK">Z_OK</a> and with zero <a href="#avail_out">avail_out</a>, it
+  must be called again after making room in the output buffer because there
+  might be more output pending.
+  <p>
+
+    If the parameter flush is set to <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, <a href="#inflate">inflate</a> flushes as much
+  output as possible to the output buffer. The flushing behavior of <a href="#inflate">inflate</a> is
+  not specified for values of the flush parameter other than <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>
+  and <a href="#Z_FINISH">Z_FINISH</a>, but the current implementation actually flushes as much output
+  as possible anyway.
+  <p>
+
+    <a href="#inflate">inflate</a>() should normally be called until it returns <a href="#Z_STREAM_END">Z_STREAM_END</a> or an
+  error. However if all decompression is to be performed in a single step
+  (a single call of <a href="#inflate">inflate</a>), the parameter flush should be set to
+  <a href="#Z_FINISH">Z_FINISH</a>. In this case all pending input is processed and all pending
+  output is flushed ; <a href="#avail_out">avail_out</a> must be large enough to hold all the
+  uncompressed data. (The size of the uncompressed data may have been saved
+  by the compressor for this purpose.) The next operation on this stream must
+  be <a href="#inflateEnd">inflateEnd</a> to deallocate the decompression <a href="#state">state</a>. The use of <a href="#Z_FINISH">Z_FINISH</a>
+  is never required, but can be used to inform <a href="#inflate">inflate</a> that a faster routine
+  may be used for the single <a href="#inflate">inflate</a>() call.
+  <p>
+
+     If a preset dictionary is needed at this point (see <a href="#inflateSetDictionary">inflateSetDictionary</a>
+  below), <a href="#inflate">inflate</a> sets strm-<a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of the
+  dictionary chosen by the compressor and returns <a href="#Z_NEED_DICT">Z_NEED_DICT</a> ; otherwise 
+  it sets strm-&gt <a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of all output produced
+  so far (that is, <a href="#total_out">total_out</a> bytes) and returns <a href="#Z_OK">Z_OK</a>, <a href="#Z_STREAM_END">Z_STREAM_END</a> or
+  an error code as described below. At the end of the stream, <a href="#inflate">inflate</a>()
+  checks that its computed <a href="#adler32">adler32</a> checksum is equal to that saved by the
+  compressor and returns <a href="#Z_STREAM_END">Z_STREAM_END</a> only if the checksum is correct.
+  <p>
+
+    <a href="#inflate">inflate</a>() returns <a href="#Z_OK">Z_OK</a> if some progress has been made (more input processed
+  or more output produced), <a href="#Z_STREAM_END">Z_STREAM_END</a> if the end of the compressed data has
+  been reached and all uncompressed output has been produced, <a href="#Z_NEED_DICT">Z_NEED_DICT</a> if a
+  preset dictionary is needed at this point, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the input data was
+  corrupted (input stream not conforming to the zlib format or incorrect
+  <a href="#adler32">adler32</a> checksum), <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream structure was inconsistent
+  (for example if <a href="#next_in">next_in</a> or <a href="#next_out">next_out</a> was NULL), <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+  enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if no progress is possible or if there was not
+  enough room in the output buffer when <a href="#Z_FINISH">Z_FINISH</a> is used. In the <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a>
+  case, the application may then call <a href="#inflateSync">inflateSync</a> to look for a good
+  compression block.
+  <p>
+
+<font color="Blue"><dt>  int  <a name="inflateEnd">inflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any
+   pending output.
+   <p>
+
+     <a href="#inflateEnd">inflateEnd</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream <a href="#state">state</a>
+   was inconsistent. In the error case, <a href="#msg">msg</a> may be set but then points to a
+   static string (which must not be deallocated).
+</dl>
+<hr>
+<a name="Advanced functions"><h2> Advanced functions </h2>
+    The following functions are needed only in some special applications.
+<h3> Function list </h3>
+<ul>
+<li>  int  <a href="#deflateInit2">deflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm,
+<li> int  <a href="#deflateSetDictionary">deflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt  dictLength);
+<li> int  <a href="#deflateCopy">deflateCopy</a> (<a href="#z_streamp">z_streamp</a> dest, <a href="#z_streamp">z_streamp</a> source);
+<li> int  <a href="#deflateReset">deflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li> int  <a href="#deflateParams">deflateParams</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int strategy);
+<li> int  <a href="#inflateInit2">inflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int  windowBits);
+<li>  int  <a href="#inflateSetDictionary">inflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt  dictLength);
+<li> int  <a href="#inflateSync">inflateSync</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li> int  <a href="#inflateReset">inflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);
+
+</ul>
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt>  int  <a name="deflateInit2">deflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int  level, int  method, int  windowBits, int  memLevel, int  strategy);</font>
+
+<dd> This is another version of <a href="#deflateInit">deflateInit</a> with more compression options. The
+   fields <a href="#next_in">next_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by
+   the caller.<p>
+
+     The method parameter is the compression method. It must be <a href="#Z_DEFLATED">Z_DEFLATED</a> in
+   this version of the library.<p>
+
+     The windowBits parameter is the base two logarithm of the window size
+   (the size of the history buffer).  It should be in the range 8..15 for this
+   version of the library. Larger values of this parameter result in better
+   compression at the expense of memory usage. The default value is 15 if
+   <a href="#deflateInit">deflateInit</a> is used instead.<p>
+
+     The memLevel parameter specifies how much memory should be allocated
+   for the internal compression <a href="#state">state</a>. memLevel=1 uses minimum memory but
+   is slow and reduces compression ratio ; memLevel=9 uses maximum memory
+   for optimal speed. The default value is 8. See zconf.h for total memory
+   usage as a function of windowBits and memLevel.<p>
+
+     The strategy parameter is used to tune the compression algorithm. Use the
+   value <a href="#Z_DEFAULT_STRATEGY">Z_DEFAULT_STRATEGY</a> for normal data, <a href="#Z_FILTERED">Z_FILTERED</a> for data produced by a
+   filter (or predictor), or <a href="#Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a> to force Huffman encoding only (no
+   string match).  Filtered data consists mostly of small values with a
+   somewhat random distribution. In this case, the compression algorithm is
+   tuned to <a href="#compress">compress</a> them better. The effect of <a href="#Z_FILTERED">Z_FILTERED</a> is to force more
+   Huffman coding and less string matching ; it is somewhat intermediate
+   between Z_DEFAULT and <a href="#Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a>. The strategy parameter only affects
+   the compression ratio but not the correctness of the compressed output even
+   if it is not set appropriately.<p>
+
+      <a href="#deflateInit2">deflateInit2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+   memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a parameter is invalid (such as an invalid
+   method). <a href="#msg">msg</a> is set to null if there is no error message.  <a href="#deflateInit2">deflateInit2</a> does
+   not perform any compression: this will be done by <a href="#deflate">deflate</a>().<p>
+                            
+<font color="Blue"><dt> int  <a name="deflateSetDictionary">deflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt  dictLength);</font>
+<dd>
+     Initializes the compression dictionary from the given byte sequence
+   without producing any compressed output. This function must be called
+   immediately after <a href="#deflateInit">deflateInit</a>, <a href="#deflateInit2">deflateInit2</a> or <a href="#deflateReset">deflateReset</a>, before any
+   call of <a href="#deflate">deflate</a>. The compressor and decompressor must use exactly the same
+   dictionary (see <a href="#inflateSetDictionary">inflateSetDictionary</a>).<p>
+
+     The dictionary should consist of strings (byte sequences) that are likely
+   to be encountered later in the data to be compressed, with the most commonly
+   used strings preferably put towards the end of the dictionary. Using a
+   dictionary is most useful when the data to be compressed is short and can be
+   predicted with good accuracy ; the data can then be compressed better than
+   with the default empty dictionary.<p>
+
+     Depending on the size of the compression data structures selected by
+   <a href="#deflateInit">deflateInit</a> or <a href="#deflateInit2">deflateInit2</a>, a part of the dictionary may in effect be
+   discarded, for example if the dictionary is larger than the window size in
+   <a href="#deflate">deflate</a> or deflate2. Thus the strings most likely to be useful should be
+   put at the end of the dictionary, not at the front.<p>
+
+     Upon return of this function, strm-&gt <a href="#adler">adler</a> is set to the Adler32 value
+   of the dictionary ; the decompressor may later use this value to determine
+   which dictionary has been used by the compressor. (The Adler32 value
+   applies to the whole dictionary even if only a subset of the dictionary is
+   actually used by the compressor.)<p>
+
+     <a href="#deflateSetDictionary">deflateSetDictionary</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
+   parameter is invalid (such as NULL dictionary) or the stream <a href="#state">state</a> is
+   inconsistent (for example if <a href="#deflate">deflate</a> has already been called for this stream
+   or if the compression method is bsort). <a href="#deflateSetDictionary">deflateSetDictionary</a> does not
+   perform any compression: this will be done by <a href="#deflate">deflate</a>().<p>
+
+<font color="Blue"><dt> int  <a name="deflateCopy">deflateCopy</a> (<a href="#z_streamp">z_streamp</a> dest, <a href="#z_streamp">z_streamp</a> source);</font>
+<dd>
+     Sets the destination stream as a complete copy of the source stream.<p>
+
+     This function can be useful when several compression strategies will be
+   tried, for example when there are several ways of pre-processing the input
+   data with a filter. The streams that will be discarded should then be freed
+   by calling <a href="#deflateEnd">deflateEnd</a>.  Note that <a href="#deflateCopy">deflateCopy</a> duplicates the internal
+   compression <a href="#state">state</a> which can be quite large, so this strategy is slow and
+   can consume lots of memory.<p>
+
+     <a href="#deflateCopy">deflateCopy</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+   enough memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source stream <a href="#state">state</a> was inconsistent
+   (such as <a href="#zalloc">zalloc</a> being NULL). <a href="#msg">msg</a> is left unchanged in both source and
+   destination.<p>
+
+<font color="Blue"><dt> int  <a name="deflateReset">deflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>     This function is equivalent to <a href="#deflateEnd">deflateEnd</a> followed by <a href="#deflateInit">deflateInit</a>,
+   but does not free and reallocate all the internal compression <a href="#state">state</a>.
+   The stream will keep the same compression level and any other attributes
+   that may have been set by <a href="#deflateInit2">deflateInit2</a>.<p>
+
+      <a href="#deflateReset">deflateReset</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
+   stream <a href="#state">state</a> was inconsistent (such as <a href="#zalloc">zalloc</a> or <a href="#state">state</a> being NULL).<p>
+
+<font color="Blue"><dt> int  <a name="deflateParams">deflateParams</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int strategy);</font>
+<dd>
+     Dynamically update the compression level and compression strategy.  The
+   interpretation of level and strategy is as in <a href="#deflateInit2">deflateInit2</a>.  This can be
+   used to switch between compression and straight copy of the input data, or
+   to switch to a different kind of input data requiring a different
+   strategy. If the compression level is changed, the input available so far
+   is compressed with the old level (and may be flushed); the new level will
+   take effect only at the next call of <a href="#deflate">deflate</a>().<p>
+
+     Before the call of <a href="#deflateParams">deflateParams</a>, the stream <a href="#state">state</a> must be set as for
+   a call of <a href="#deflate">deflate</a>(), since the currently available input may have to
+   be compressed and flushed. In particular, strm-&gt <a href="#avail_out">avail_out</a> must be 
+   non-zero.<p>
+
+     <a href="#deflateParams">deflateParams</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
+   stream <a href="#state">state</a> was inconsistent or if a parameter was invalid, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a>
+   if strm-&gtavail_out was zero.<p>
+
+<font color="Blue"><dt> int  <a name="inflateInit2">inflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int  windowBits);</font>
+
+<dd>     This is another version of <a href="#inflateInit">inflateInit</a> with an extra parameter. The
+   fields <a href="#next_in">next_in</a>, <a href="#avail_in">avail_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized
+   before by the caller.<p>
+
+     The windowBits parameter is the base two logarithm of the maximum window
+   size (the size of the history buffer).  It should be in the range 8..15 for
+   this version of the library. The default value is 15 if <a href="#inflateInit">inflateInit</a> is used
+   instead. If a compressed stream with a larger window size is given as
+   input, <a href="#inflate">inflate</a>() will return with the error code <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> instead of
+   trying to allocate a larger window.<p>
+
+      <a href="#inflateInit2">inflateInit2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+   memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a parameter is invalid (such as a negative
+   memLevel). <a href="#msg">msg</a> is set to null if there is no error message.  <a href="#inflateInit2">inflateInit2</a>
+   does not perform any decompression apart from reading the zlib header if
+   present: this will be done by <a href="#inflate">inflate</a>(). (So <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> may be
+   modified, but <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> are unchanged.)<p>
+
+<font color="Blue"><dt>  int  <a name="inflateSetDictionary">inflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt  dictLength);</font>
+<dd>
+     Initializes the decompression dictionary from the given uncompressed byte
+   sequence. This function must be called immediately after a call of <a href="#inflate">inflate</a>
+   if this call returned <a href="#Z_NEED_DICT">Z_NEED_DICT</a>. The dictionary chosen by the compressor
+   can be determined from the Adler32 value returned by this call of
+   <a href="#inflate">inflate</a>. The compressor and decompressor must use exactly the same
+   dictionary (see <a href="#deflateSetDictionary">deflateSetDictionary</a>).<p>
+
+     <a href="#inflateSetDictionary">inflateSetDictionary</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
+   parameter is invalid (such as NULL dictionary) or the stream <a href="#state">state</a> is
+   inconsistent, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the given dictionary doesn't match the
+   expected one (incorrect Adler32 value). <a href="#inflateSetDictionary">inflateSetDictionary</a> does not
+   perform any decompression: this will be done by subsequent calls of
+   <a href="#inflate">inflate</a>().<p>
+
+<font color="Blue"><dt> int  <a name="inflateSync">inflateSync</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+
+<dd>    Skips invalid compressed data until a full flush point (see above the
+  description of <a href="#deflate">deflate</a> with <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a>) can be found, or until all
+  available input is skipped. No output is provided.<p>
+
+    <a href="#inflateSync">inflateSync</a> returns <a href="#Z_OK">Z_OK</a> if a full flush point has been found, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a>
+  if no more input was provided, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if no flush point has been found,
+  or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream structure was inconsistent. In the success
+  case, the application may save the current current value of <a href="#total_in">total_in</a> which
+  indicates where valid compressed data was found. In the error case, the
+  application may repeatedly call <a href="#inflateSync">inflateSync</a>, providing more input each time,
+  until success or end of the input data.<p>
+
+<font color="Blue"><dt> int  <a name="inflateReset">inflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+     This function is equivalent to <a href="#inflateEnd">inflateEnd</a> followed by <a href="#inflateInit">inflateInit</a>,
+   but does not free and reallocate all the internal decompression <a href="#state">state</a>.
+   The stream will keep attributes that may have been set by <a href="#inflateInit2">inflateInit2</a>.
+   <p>
+
+      <a href="#inflateReset">inflateReset</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
+   stream <a href="#state">state</a> was inconsistent (such as <a href="#zalloc">zalloc</a> or <a href="#state">state</a> being NULL).
+   <p>
+</dl>
+
+<hr>
+<a name="Checksum functions"><h2> Checksum functions </h2>
+     These functions are not related to compression but are exported
+   anyway because they might be useful in applications using the
+   compression library.
+<h3> Function list </h3>
+<ul>
+<li> uLong  <a href="#adler32">adler32</a> (uLong <a href="#adler">adler</a>, const Bytef *buf, uInt len);
+<li> uLong  <a href="#crc32">crc32</a>   (uLong crc, const Bytef *buf, uInt len);
+</ul>
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt> uLong  <a name="adler32">adler32</a> (uLong <a href="#adler">adler</a>, const Bytef *buf, uInt len);</font>
+<dd>
+     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+   return the updated checksum. If buf is NULL, this function returns
+   the required initial value for the checksum.
+   <p>
+   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+   much faster. Usage example:
+   <pre>
+
+     uLong <a href="#adler">adler</a> = <a href="#adler32">adler32</a>(0L, <a href="#Z_NULL">Z_NULL</a>, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       <a href="#adler">adler</a> = <a href="#adler32">adler32</a>(<a href="#adler">adler</a>, buffer, length);
+     }
+     if (<a href="#adler">adler</a> != original_adler) error();
+   </pre>
+
+<font color="Blue"><dt> uLong  <a name="crc32">crc32</a>   (uLong crc, const Bytef *buf, uInt len);</font>
+<dd>
+     Update a running crc with the bytes buf[0..len-1] and return the updated
+   crc. If buf is NULL, this function returns the required initial value
+   for the crc. Pre- and post-conditioning (one's complement) is performed
+   within this function so it shouldn't be done by the application.
+   Usage example:
+   <pre>
+
+     uLong crc = <a href="#crc32">crc32</a>(0L, <a href="#Z_NULL">Z_NULL</a>, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       crc = <a href="#crc32">crc32</a>(crc, buffer, length);
+     }
+     if (crc != original_crc) error();
+   </pre>
+</dl>
+<hr>
+<a name="struct z_stream_s"><h2> struct z_stream_s </h2>
+<font color="Blue">
+<a name="z_stream_s">
+<pre>
+typedef struct z_stream_s {
+    Bytef    *<a name="next_in">next_in</a>;  /* next input byte */
+    uInt     <a name="avail_in">avail_in</a>;  /* number of bytes available at <a href="#next_in">next_in</a> */
+    uLong    <a name="total_in">total_in</a>;  /* total nb of input bytes read so far */
+
+    Bytef    *<a name="next_out">next_out</a>; /* next output byte should be put there */
+    uInt     <a name="avail_out">avail_out</a>; /* remaining free space at <a href="#next_out">next_out</a> */
+    uLong    <a name="total_out">total_out</a>; /* total nb of bytes output so far */
+
+    char     *<a name="msg">msg</a>;      /* last error message, NULL if no error */
+    struct internal_state FAR *<a name="state">state</a>; /* not visible by applications */
+
+    alloc_func <a name="zalloc">zalloc</a>;  /* used to allocate the internal <a href="#state">state</a> */
+    free_func  <a name="zfree">zfree</a>;   /* used to free the internal <a href="#state">state</a> */
+    voidpf     <a name="opaque">opaque</a>;  /* private data object passed to <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> */
+
+    int     <a name="data_type">data_type</a>;  /* best guess about the data type: ascii or binary */
+    uLong   <a name="adler">adler</a>;      /* <a href="#adler32">adler32</a> value of the uncompressed data */
+    uLong   <a name="reserved">reserved</a>;   /* <a href="#reserved">reserved</a> for future use */
+} <a href="#z_stream_s">z_stream</a> ;
+
+typedef <a href="#z_stream_s">z_stream</a> FAR * <a name="z_streamp">z_streamp</a>;  ÿ 
+</pre>
+</font>
+   The application must update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> when <a href="#avail_in">avail_in</a> has
+   dropped to zero. It must update <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> when <a href="#avail_out">avail_out</a>
+   has dropped to zero. The application must initialize <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and
+   <a href="#opaque">opaque</a> before calling the init function. All other fields are set by the
+   compression library and must not be updated by the application. <p>
+
+   The <a href="#opaque">opaque</a> value provided by the application will be passed as the first
+   parameter for calls of <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a>. This can be useful for custom
+   memory management. The compression library attaches no meaning to the
+   <a href="#opaque">opaque</a> value. <p>
+
+   <a href="#zalloc">zalloc</a> must return <a href="#Z_NULL">Z_NULL</a> if there is not enough memory for the object.
+   If zlib is used in a multi-threaded application, <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> must be
+   thread safe. <p>
+
+   On 16-bit systems, the functions <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this
+   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+   pointers returned by <a href="#zalloc">zalloc</a> for objects of exactly 65536 bytes *must*
+   have their offset normalized to zero. The default allocation function
+   provided by this library ensures this (see zutil.c). To reduce memory
+   requirements and avoid any allocation of 64K objects, at the expense of
+   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+   <p>
+
+   The fields <a href="#total_in">total_in</a> and <a href="#total_out">total_out</a> can be used for statistics or
+   progress reports. After compression, <a href="#total_in">total_in</a> holds the total size of
+   the uncompressed data and may be saved for use in the decompressor
+   (particularly if the decompressor wants to decompress everything in
+   a single step). <p>
+
+<hr>
+<a name="Constants"><h2> Constants </h2>
+<font color="Blue">
+<pre>
+#define <a name="Z_NO_FLUSH">Z_NO_FLUSH</a>      0
+#define <a name="Z_PARTIAL_FLUSH">Z_PARTIAL_FLUSH</a> 1 
+	/* will be removed, use <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a> instead */
+#define <a name="Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>    2
+#define <a name="Z_FULL_FLUSH">Z_FULL_FLUSH</a>    3
+#define <a name="Z_FINISH">Z_FINISH</a>        4
+/* Allowed flush values ; see <a href="#deflate">deflate</a>() below for details */
+
+#define <a name="Z_OK">Z_OK</a>            0
+#define <a name="Z_STREAM_END">Z_STREAM_END</a>    1
+#define <a name="Z_NEED_DICT">Z_NEED_DICT</a>     2
+#define <a name="Z_ERRNO">Z_ERRNO</a>        (-1)
+#define <a name="Z_STREAM_ERROR">Z_STREAM_ERROR</a> (-2)
+#define <a name="Z_DATA_ERROR">Z_DATA_ERROR</a>   (-3)
+#define <a name="Z_MEM_ERROR">Z_MEM_ERROR</a>    (-4)
+#define <a name="Z_BUF_ERROR">Z_BUF_ERROR</a>    (-5)
+#define <a name="Z_VERSION_ERROR">Z_VERSION_ERROR</a> (-6)
+/* Return codes for the compression/decompression functions. Negative
+ * values are errors, positive values are used for special but normal events.
+ */
+
+#define <a name="Z_NO_COMPRESSION">Z_NO_COMPRESSION</a>         0
+#define <a name="Z_BEST_SPEED">Z_BEST_SPEED</a>             1
+#define <a name="Z_BEST_COMPRESSION">Z_BEST_COMPRESSION</a>       9
+#define <a name="Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a>  (-1)
+/* compression levels */
+
+#define <a name="Z_FILTERED">Z_FILTERED</a>            1
+#define <a name="Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a>        2
+#define <a name="Z_DEFAULT_STRATEGY">Z_DEFAULT_STRATEGY</a>    0
+/* compression strategy ; see <a href="#deflateInit2">deflateInit2</a>() below for details */
+
+#define <a name="Z_BINARY">Z_BINARY</a>   0
+#define <a name="Z_ASCII">Z_ASCII</a>    1
+#define <a name="Z_UNKNOWN">Z_UNKNOWN</a>  2
+/* Possible values of the <a href="#data_type">data_type</a> field */
+
+#define <a name="Z_DEFLATED">Z_DEFLATED</a>   8
+/* The <a href="#deflate">deflate</a> compression method (the only one supported in this version) */
+
+#define <a name="Z_NULL">Z_NULL</a>  0  /* for initializing <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a>, <a href="#opaque">opaque</a> */
+
+#define <a name="zlib_version">zlib_version</a> <a href="#zlibVersion">zlibVersion</a>()
+/* for compatibility with versions less than 1.0.2 */
+</pre>
+</font>
+
+<hr>
+<a name="Misc"><h2> Misc </h2>
+ <a href="#deflateInit">deflateInit</a> and <a href="#inflateInit">inflateInit</a> are macros to allow checking the zlib version
+ and the compiler's view of <a href="#z_stream_s">z_stream</a>.
+ <p>
+ Other functions:
+ <dl>
+ <font color="Blue"><dt> const char   *  <a name="zError">zError</a>           (int err);</font>
+ <font color="Blue"><dt> int             <a name="inflateSyncPoint">inflateSyncPoint</a> (<a href="#z_streamp">z_streamp</a> z);</font>
+ <font color="Blue"><dt> const uLongf *  <a name="get_crc_table">get_crc_table</a>    (void);</font>
+ </dl>
+ <hr>
+ <font size="-1">
+ Last update: Wed Oct 13 20:42:34 1999<br>
+ piapi@csie.ntu.edu.tw
+ </font>
+
+</body>
+</html>
diff --git a/nx-X11/extras/zlib/zutil.c b/nx-X11/extras/zlib/zutil.c
new file mode 100644
index 000000000..48c7eaf39
--- /dev/null
+++ b/nx-X11/extras/zlib/zutil.c
@@ -0,0 +1,223 @@
+/* zutil.c -- target dependent utility functions for the compression library
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+#include "zutil.h"
+
+struct internal_state      {int dummy;}; /* for buggy compilers */
+
+#ifndef STDC
+extern void exit OF((int));
+#endif
+
+const char *z_errmsg[10] = {
+"need dictionary",     /* Z_NEED_DICT       2  */
+"stream end",          /* Z_STREAM_END      1  */
+"",                    /* Z_OK              0  */
+"file error",          /* Z_ERRNO         (-1) */
+"stream error",        /* Z_STREAM_ERROR  (-2) */
+"data error",          /* Z_DATA_ERROR    (-3) */
+"insufficient memory", /* Z_MEM_ERROR     (-4) */
+"buffer error",        /* Z_BUF_ERROR     (-5) */
+"incompatible version",/* Z_VERSION_ERROR (-6) */
+""};
+
+
+const char * ZEXPORT zlibVersion()
+{
+    return ZLIB_VERSION;
+}
+
+#ifdef DEBUG
+
+#  ifndef verbose
+#    define verbose 0
+#  endif
+int z_verbose = verbose;
+
+void z_error (m)
+    char *m;
+{
+    fprintf(stderr, "%s\n", m);
+    exit(1);
+}
+#endif
+
+/* exported to allow conversion of error code to string for compress() and
+ * uncompress()
+ */
+const char * ZEXPORT zError(err)
+    int err;
+{
+    return ERR_MSG(err);
+}
+
+
+#ifndef HAVE_MEMCPY
+
+void zmemcpy(dest, source, len)
+    Bytef* dest;
+    const Bytef* source;
+    uInt  len;
+{
+    if (len == 0) return;
+    do {
+        *dest++ = *source++; /* ??? to be unrolled */
+    } while (--len != 0);
+}
+
+int zmemcmp(s1, s2, len)
+    const Bytef* s1;
+    const Bytef* s2;
+    uInt  len;
+{
+    uInt j;
+
+    for (j = 0; j < len; j++) {
+        if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
+    }
+    return 0;
+}
+
+void zmemzero(dest, len)
+    Bytef* dest;
+    uInt  len;
+{
+    if (len == 0) return;
+    do {
+        *dest++ = 0;  /* ??? to be unrolled */
+    } while (--len != 0);
+}
+#endif
+
+#ifdef __TURBOC__
+#if (defined( __BORLANDC__) || !defined(SMALL_MEDIUM)) && !defined(__32BIT__)
+/* Small and medium model in Turbo C are for now limited to near allocation
+ * with reduced MAX_WBITS and MAX_MEM_LEVEL
+ */
+#  define MY_ZCALLOC
+
+/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
+ * and farmalloc(64K) returns a pointer with an offset of 8, so we
+ * must fix the pointer. Warning: the pointer must be put back to its
+ * original form in order to free it, use zcfree().
+ */
+
+#define MAX_PTR 10
+/* 10*64K = 640K */
+
+local int next_ptr = 0;
+
+typedef struct ptr_table_s {
+    voidpf org_ptr;
+    voidpf new_ptr;
+} ptr_table;
+
+local ptr_table table[MAX_PTR];
+/* This table is used to remember the original form of pointers
+ * to large buffers (64K). Such pointers are normalized with a zero offset.
+ * Since MSDOS is not a preemptive multitasking OS, this table is not
+ * protected from concurrent access. This hack doesn't work anyway on
+ * a protected system like OS/2. Use Microsoft C instead.
+ */
+
+voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+{
+    voidpf buf = opaque; /* just to make some compilers happy */
+    ulg bsize = (ulg)items*size;
+
+    /* If we allocate less than 65520 bytes, we assume that farmalloc
+     * will return a usable pointer which doesn't have to be normalized.
+     */
+    if (bsize < 65520L) {
+        buf = farmalloc(bsize);
+        if (*(ush*)&buf != 0) return buf;
+    } else {
+        buf = farmalloc(bsize + 16L);
+    }
+    if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
+    table[next_ptr].org_ptr = buf;
+
+    /* Normalize the pointer to seg:0 */
+    *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
+    *(ush*)&buf = 0;
+    table[next_ptr++].new_ptr = buf;
+    return buf;
+}
+
+void  zcfree (voidpf opaque, voidpf ptr)
+{
+    int n;
+    if (*(ush*)&ptr != 0) { /* object < 64K */
+        farfree(ptr);
+        return;
+    }
+    /* Find the original pointer */
+    for (n = 0; n < next_ptr; n++) {
+        if (ptr != table[n].new_ptr) continue;
+
+        farfree(table[n].org_ptr);
+        while (++n < next_ptr) {
+            table[n-1] = table[n];
+        }
+        next_ptr--;
+        return;
+    }
+    ptr = opaque; /* just to make some compilers happy */
+    Assert(0, "zcfree: ptr not found");
+}
+#endif
+#endif /* __TURBOC__ */
+
+
+#if defined(M_I86) && !defined(__32BIT__)
+/* Microsoft C in 16-bit mode */
+
+#  define MY_ZCALLOC
+
+#if (!defined(_MSC_VER) || (_MSC_VER <= 600))
+#  define _halloc  halloc
+#  define _hfree   hfree
+#endif
+
+voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+{
+    if (opaque) opaque = 0; /* to make compiler happy */
+    return _halloc((long)items, size);
+}
+
+void  zcfree (voidpf opaque, voidpf ptr)
+{
+    if (opaque) opaque = 0; /* to make compiler happy */
+    _hfree(ptr);
+}
+
+#endif /* MSC */
+
+
+#ifndef MY_ZCALLOC /* Any system without a special alloc function */
+
+#ifndef STDC
+extern voidp  calloc OF((uInt items, uInt size));
+extern void   free   OF((voidpf ptr));
+#endif
+
+voidpf zcalloc (opaque, items, size)
+    voidpf opaque;
+    unsigned items;
+    unsigned size;
+{
+    if (opaque) items += size - size; /* make compiler happy */
+    return (voidpf)calloc(items, size);
+}
+
+void  zcfree (opaque, ptr)
+    voidpf opaque;
+    voidpf ptr;
+{
+    free(ptr);
+    if (opaque) return; /* make compiler happy */
+}
+
+#endif /* MY_ZCALLOC */
diff --git a/nx-X11/extras/zlib/zutil.h b/nx-X11/extras/zlib/zutil.h
new file mode 100644
index 000000000..6a12c33b9
--- /dev/null
+++ b/nx-X11/extras/zlib/zutil.h
@@ -0,0 +1,219 @@
+/* zutil.h -- internal interface and configuration of the compression library
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+/* $XFree86$ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+#ifndef _Z_UTIL_H
+#define _Z_UTIL_H
+
+#include "zlib.h"
+
+#if defined(MSDOS)||defined(VMS)||defined(CRAY)||defined(WIN32)||defined(RISCOS)||defined(__UNIXOS2__)||defined(STDC)
+#   include <stddef.h>
+#   include <errno.h>
+#else
+    extern int errno;
+#endif
+#ifdef STDC
+#  include <string.h>
+#  include <stdlib.h>
+#endif
+
+#ifndef local
+#  define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+typedef unsigned char  uch;
+typedef uch FAR uchf;
+typedef unsigned short ush;
+typedef ush FAR ushf;
+typedef unsigned long  ulg;
+
+extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
+/* (size given to avoid silly warnings with Visual C++) */
+
+#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
+
+#define ERR_RETURN(strm,err) \
+  return (strm->msg = (char*)ERR_MSG(err), (err))
+/* To be used only when the state is known to be valid */
+
+        /* common constants */
+
+#ifndef DEF_WBITS
+#  define DEF_WBITS MAX_WBITS
+#endif
+/* default windowBits for decompression. MAX_WBITS is for compression only */
+
+#if MAX_MEM_LEVEL >= 8
+#  define DEF_MEM_LEVEL 8
+#else
+#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
+#endif
+/* default memLevel */
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES    2
+/* The three kinds of block type */
+
+#define MIN_MATCH  3
+#define MAX_MATCH  258
+/* The minimum and maximum match lengths */
+
+#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
+
+        /* target dependencies */
+
+#ifdef MSDOS
+#  define OS_CODE  0x00
+#  if defined(__TURBOC__) || defined(__BORLANDC__)
+#    if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
+       /* Allow compilation with ANSI keywords only enabled */
+       void _Cdecl farfree( void *block );
+       void *_Cdecl farmalloc( unsigned long nbytes );
+#    else
+#     include <alloc.h>
+#    endif
+#  else /* MSC or DJGPP */
+#    include <malloc.h>
+#  endif
+#endif
+
+#ifdef OS2
+#  define OS_CODE  0x06
+#endif
+
+#ifdef WIN32 /* Window 95 & Windows NT */
+#  define OS_CODE  0x0b
+#endif
+
+#if defined(VAXC) || defined(VMS)
+#  define OS_CODE  0x02
+#  define F_OPEN(name, mode) \
+     fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
+#endif
+
+#ifdef AMIGA
+#  define OS_CODE  0x01
+#endif
+
+#if defined(ATARI) || defined(atarist)
+#  define OS_CODE  0x05
+#endif
+
+#if defined(MACOS) || defined(TARGET_OS_MAC)
+#  define OS_CODE  0x07
+#  if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+#    include <unix.h> /* for fdopen */
+#  else
+#    ifndef fdopen
+#      define fdopen(fd,mode) NULL /* No fdopen() */
+#    endif
+#  endif
+#endif
+
+#ifdef __50SERIES /* Prime/PRIMOS */
+#  define OS_CODE  0x0F
+#endif
+
+#ifdef TOPS20
+#  define OS_CODE  0x0a
+#endif
+
+#if defined(_BEOS_) || defined(RISCOS)
+#  define fdopen(fd,mode) NULL /* No fdopen() */
+#endif
+
+#if (defined(_MSC_VER) && (_MSC_VER > 600))
+#  define fdopen(fd,type)  _fdopen(fd,type)
+#endif
+
+
+        /* Common defaults */
+
+#ifndef OS_CODE
+#  define OS_CODE  0x03  /* assume Unix */
+#endif
+
+#ifndef F_OPEN
+#  define F_OPEN(name, mode) fopen((name), (mode))
+#endif
+
+         /* functions */
+
+#ifdef HAVE_STRERROR
+   extern char *strerror OF((int));
+#  define zstrerror(errnum) strerror(errnum)
+#else
+#  define zstrerror(errnum) ""
+#endif
+
+#if defined(pyr)
+#  define NO_MEMCPY
+#endif
+#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
+ /* Use our own functions for small and medium model with MSC <= 5.0.
+  * You may have to use the same strategy for Borland C (untested).
+  * The __SC__ check is for Symantec.
+  */
+#  define NO_MEMCPY
+#endif
+#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
+#  define HAVE_MEMCPY
+#endif
+#ifdef HAVE_MEMCPY
+#  ifdef SMALL_MEDIUM /* MSDOS small or medium model */
+#    define zmemcpy _fmemcpy
+#    define zmemcmp _fmemcmp
+#    define zmemzero(dest, len) _fmemset(dest, 0, len)
+#  else
+#    define zmemcpy memcpy
+#    define zmemcmp memcmp
+#    define zmemzero(dest, len) memset(dest, 0, len)
+#  endif
+#else
+   extern void zmemcpy  OF((Bytef* dest, const Bytef* source, uInt len));
+   extern int  zmemcmp  OF((const Bytef* s1, const Bytef* s2, uInt len));
+   extern void zmemzero OF((Bytef* dest, uInt len));
+#endif
+
+/* Diagnostic functions */
+#ifdef DEBUG
+#  include <stdio.h>
+   extern int z_verbose;
+   extern void z_error    OF((char *m));
+#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
+#  define Trace(x) {if (z_verbose>=0) fprintf x ;}
+#  define Tracev(x) {if (z_verbose>0) fprintf x ;}
+#  define Tracevv(x) {if (z_verbose>1) fprintf x ;}
+#  define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
+#  define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
+#else
+#  define Assert(cond,msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c,x)
+#  define Tracecv(c,x)
+#endif
+
+
+typedef uLong (ZEXPORT *check_func) OF((uLong check, const Bytef *buf,
+				       uInt len));
+voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
+void   zcfree  OF((voidpf opaque, voidpf ptr));
+
+#define ZALLOC(strm, items, size) \
+           (*((strm)->zalloc))((strm)->opaque, (items), (size))
+#define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
+#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
+
+#endif /* _Z_UTIL_H */