Convert nx-X11/lib/ build flow from imake to autotools.

1 files changed, 294 insertions, 0 deletions

diff --git a/nx-X11/lib/src/poly.h b/nx-X11/lib/src/poly.h
new file mode 100644
index 000000000..e064783d7
--- /dev/null
+++ b/nx-X11/lib/src/poly.h
@@ -0,0 +1,294 @@
+/************************************************************************
+
+Copyright 1987, 1998  The Open Group
+
+Permission to use, copy, modify, distribute, and sell this software and its
+documentation for any purpose is hereby granted without fee, provided that
+the above copyright notice appear in all copies and that both that
+copyright notice and this permission notice appear in supporting
+documentation.
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of The Open Group shall not be
+used in advertising or otherwise to promote the sale, use or other dealings
+in this Software without prior written authorization from The Open Group.
+
+
+Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts.
+
+                        All Rights Reserved
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted,
+provided that the above copyright notice appear in all copies and that
+both that copyright notice and this permission notice appear in
+supporting documentation, and that the name of Digital not be
+used in advertising or publicity pertaining to distribution of the
+software without specific, written prior permission.
+
+DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
+DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+SOFTWARE.
+
+************************************************************************/
+
+/*
+ *     This file contains a few macros to help track
+ *     the edge of a filled object.  The object is assumed
+ *     to be filled in scanline order, and thus the
+ *     algorithm used is an extension of Bresenham's line
+ *     drawing algorithm which assumes that y is always the
+ *     major axis.
+ *     Since these pieces of code are the same for any filled shape,
+ *     it is more convenient to gather the library in one
+ *     place, but since these pieces of code are also in
+ *     the inner loops of output primitives, procedure call
+ *     overhead is out of the question.
+ *     See the author for a derivation if needed.
+ */
+
+
+/*
+ *  In scan converting polygons, we want to choose those pixels
+ *  which are inside the polygon.  Thus, we add .5 to the starting
+ *  x coordinate for both left and right edges.  Now we choose the
+ *  first pixel which is inside the pgon for the left edge and the
+ *  first pixel which is outside the pgon for the right edge.
+ *  Draw the left pixel, but not the right.
+ *
+ *  How to add .5 to the starting x coordinate:
+ *      If the edge is moving to the right, then subtract dy from the
+ *  error term from the general form of the algorithm.
+ *      If the edge is moving to the left, then add dy to the error term.
+ *
+ *  The reason for the difference between edges moving to the left
+ *  and edges moving to the right is simple:  If an edge is moving
+ *  to the right, then we want the algorithm to flip immediately.
+ *  If it is moving to the left, then we don't want it to flip until
+ *  we traverse an entire pixel.
+ */
+#define BRESINITPGON(dy, x1, x2, xStart, d, m, m1, incr1, incr2) { \
+    int dx;      /* local storage */ \
+\
+    /* \
+     *  if the edge is horizontal, then it is ignored \
+     *  and assumed not to be processed.  Otherwise, do this stuff. \
+     */ \
+    if ((dy) != 0) { \
+        xStart = (x1); \
+        dx = (x2) - xStart; \
+        if (dx < 0) { \
+            m = dx / (dy); \
+            m1 = m - 1; \
+            incr1 = -2 * dx + 2 * (dy) * m1; \
+            incr2 = -2 * dx + 2 * (dy) * m; \
+            d = 2 * m * (dy) - 2 * dx - 2 * (dy); \
+        } else { \
+            m = dx / (dy); \
+            m1 = m + 1; \
+            incr1 = 2 * dx - 2 * (dy) * m1; \
+            incr2 = 2 * dx - 2 * (dy) * m; \
+            d = -2 * m * (dy) + 2 * dx; \
+        } \
+    } \
+}
+
+#define BRESINCRPGON(d, minval, m, m1, incr1, incr2) { \
+    if (m1 > 0) { \
+        if (d > 0) { \
+            minval += m1; \
+            d += incr1; \
+        } \
+        else { \
+            minval += m; \
+            d += incr2; \
+        } \
+    } else {\
+        if (d >= 0) { \
+            minval += m1; \
+            d += incr1; \
+        } \
+        else { \
+            minval += m; \
+            d += incr2; \
+        } \
+    } \
+}
+
+
+/*
+ *     This structure contains all of the information needed
+ *     to run the bresenham algorithm.
+ *     The variables may be hardcoded into the declarations
+ *     instead of using this structure to make use of
+ *     register declarations.
+ */
+typedef struct {
+    int minor_axis;	/* minor axis        */
+    int d;		/* decision variable */
+    int m, m1;		/* slope and slope+1 */
+    int incr1, incr2;	/* error increments */
+} BRESINFO;
+
+
+#define BRESINITPGONSTRUCT(dmaj, min1, min2, bres) \
+	BRESINITPGON(dmaj, min1, min2, bres.minor_axis, bres.d, \
+                     bres.m, bres.m1, bres.incr1, bres.incr2)
+
+#define BRESINCRPGONSTRUCT(bres) \
+        BRESINCRPGON(bres.d, bres.minor_axis, bres.m, bres.m1, bres.incr1, bres.incr2)
+
+
+
+/*
+ *     These are the data structures needed to scan
+ *     convert regions.  Two different scan conversion
+ *     methods are available -- the even-odd method, and
+ *     the winding number method.
+ *     The even-odd rule states that a point is inside
+ *     the polygon if a ray drawn from that point in any
+ *     direction will pass through an odd number of
+ *     path segments.
+ *     By the winding number rule, a point is decided
+ *     to be inside the polygon if a ray drawn from that
+ *     point in any direction passes through a different
+ *     number of clockwise and counter-clockwise path
+ *     segments.
+ *
+ *     These data structures are adapted somewhat from
+ *     the algorithm in (Foley/Van Dam) for scan converting
+ *     polygons.
+ *     The basic algorithm is to start at the top (smallest y)
+ *     of the polygon, stepping down to the bottom of
+ *     the polygon by incrementing the y coordinate.  We
+ *     keep a list of edges which the current scanline crosses,
+ *     sorted by x.  This list is called the Active Edge Table (AET)
+ *     As we change the y-coordinate, we update each entry in
+ *     in the active edge table to reflect the edges new xcoord.
+ *     This list must be sorted at each scanline in case
+ *     two edges intersect.
+ *     We also keep a data structure known as the Edge Table (ET),
+ *     which keeps track of all the edges which the current
+ *     scanline has not yet reached.  The ET is basically a
+ *     list of ScanLineList structures containing a list of
+ *     edges which are entered at a given scanline.  There is one
+ *     ScanLineList per scanline at which an edge is entered.
+ *     When we enter a new edge, we move it from the ET to the AET.
+ *
+ *     From the AET, we can implement the even-odd rule as in
+ *     (Foley/Van Dam).
+ *     The winding number rule is a little trickier.  We also
+ *     keep the EdgeTableEntries in the AET linked by the
+ *     nextWETE (winding EdgeTableEntry) link.  This allows
+ *     the edges to be linked just as before for updating
+ *     purposes, but only uses the edges linked by the nextWETE
+ *     link as edges representing spans of the polygon to
+ *     drawn (as with the even-odd rule).
+ */
+
+/*
+ * for the winding number rule
+ */
+#define CLOCKWISE          1
+#define COUNTERCLOCKWISE  -1
+
+typedef struct _EdgeTableEntry {
+     int ymax;             /* ycoord at which we exit this edge. */
+     BRESINFO bres;        /* Bresenham info to run the edge     */
+     struct _EdgeTableEntry *next;       /* next in the list     */
+     struct _EdgeTableEntry *back;       /* for insertion sort   */
+     struct _EdgeTableEntry *nextWETE;   /* for winding num rule */
+     int ClockWise;        /* flag for winding number rule       */
+} EdgeTableEntry;
+
+
+typedef struct _ScanLineList{
+     int scanline;              /* the scanline represented */
+     EdgeTableEntry *edgelist;  /* header node              */
+     struct _ScanLineList *next;  /* next in the list       */
+} ScanLineList;
+
+
+typedef struct {
+     int ymax;                 /* ymax for the polygon     */
+     int ymin;                 /* ymin for the polygon     */
+     ScanLineList scanlines;   /* header node              */
+} EdgeTable;
+
+
+/*
+ * Here is a struct to help with storage allocation
+ * so we can allocate a big chunk at a time, and then take
+ * pieces from this heap when we need to.
+ */
+#define SLLSPERBLOCK 25
+
+typedef struct _ScanLineListBlock {
+     ScanLineList SLLs[SLLSPERBLOCK];
+     struct _ScanLineListBlock *next;
+} ScanLineListBlock;
+
+
+
+/*
+ *
+ *     a few macros for the inner loops of the fill code where
+ *     performance considerations don't allow a procedure call.
+ *
+ *     Evaluate the given edge at the given scanline.
+ *     If the edge has expired, then we leave it and fix up
+ *     the active edge table; otherwise, we increment the
+ *     x value to be ready for the next scanline.
+ *     The winding number rule is in effect, so we must notify
+ *     the caller when the edge has been removed so he
+ *     can reorder the Winding Active Edge Table.
+ */
+#define EVALUATEEDGEWINDING(pAET, pPrevAET, y, fixWAET) { \
+   if (pAET->ymax == y) {          /* leaving this edge */ \
+      pPrevAET->next = pAET->next; \
+      pAET = pPrevAET->next; \
+      fixWAET = 1; \
+      if (pAET) \
+         pAET->back = pPrevAET; \
+   } \
+   else { \
+      BRESINCRPGONSTRUCT(pAET->bres); \
+      pPrevAET = pAET; \
+      pAET = pAET->next; \
+   } \
+}
+
+
+/*
+ *     Evaluate the given edge at the given scanline.
+ *     If the edge has expired, then we leave it and fix up
+ *     the active edge table; otherwise, we increment the
+ *     x value to be ready for the next scanline.
+ *     The even-odd rule is in effect.
+ */
+#define EVALUATEEDGEEVENODD(pAET, pPrevAET, y) { \
+   if (pAET->ymax == y) {          /* leaving this edge */ \
+      pPrevAET->next = pAET->next; \
+      pAET = pPrevAET->next; \
+      if (pAET) \
+         pAET->back = pPrevAET; \
+   } \
+   else { \
+      BRESINCRPGONSTRUCT(pAET->bres); \
+      pPrevAET = pAET; \
+      pAET = pAET->next; \
+   } \
+}