massive reduction of unneeded files

8 files changed, 0 insertions, 1498 deletions

diff --git a/nx-X11/programs/Xserver/Xprint/etc/Imakefile b/nx-X11/programs/Xserver/Xprint/etc/Imakefile
deleted file mode 100644
index 6a6e02a29..000000000
--- a/nx-X11/programs/Xserver/Xprint/etc/Imakefile
+++ /dev/null
@@ -1,24 +0,0 @@
-XCOMM $Xorg: Imakefile,v 1.1 2002/10/31 14:42:52 gisburn Exp $
-#define IHaveSubdirs
-#define PassCDebugFlags CDEBUGFLAGS="$(CDEBUGFLAGS)"
-
-XCOMM Check if OS has /etc/profile.d/
-XCOMM Note that Debian Linux does not have /etc/profile.d/
-#ifndef HasEtcProfileDir
-# ifdef LinuxArchitecture
-#  if (LinuxDistribution != LinuxDebian) || BuildFullXprintDistrib
-#   define HasEtcProfileDir YES
-#  endif
-# else
-#  define HasEtcProfileDir NO
-# endif
-#endif
-
-#if HasEtcProfileDir
-SUBDIRS = init.d profile.d Xsession.d
-#else
-SUBDIRS = init.d Xsession.d
-#endif
-
-MakeSubdirs($(SUBDIRS))
-DependSubdirs($(SUBDIRS))
diff --git a/nx-X11/programs/Xserver/Xprint/etc/Xsession.d/Imakefile b/nx-X11/programs/Xserver/Xprint/etc/Xsession.d/Imakefile
deleted file mode 100644
index 55a07175e..000000000
--- a/nx-X11/programs/Xserver/Xprint/etc/Xsession.d/Imakefile
+++ /dev/null
@@ -1,24 +0,0 @@
-XCOMM $Xorg: Imakefile,v 1.1 2003/01/25 14:42:52 gisburn Exp $
-
-#if NothingOutsideProjectRoot
-#define EtcDir ProjectRoot/etc
-#else
-#define EtcDir /etc
-#endif
-
-ETCDIR = EtcDir
-
-all::
-
-XCOMM Install glue for Xprint on Solaris/CDE1.x and CDE on AIX
-#if (defined(SunArchitecture) && (OSMajorVersion > 4)) || defined(IBMArchitecture)
-InstallNamedProg(cde_xsessiond_xprint.sh,0018.xprint,/usr/dt/config/Xsession.d)
-#endif
-
-XCOMM Install xdm startup glue for Xprint on Linux. Note that not all Linux
-XCOMM platforms have /etc/X11/Xsession.d/ and/or /etc/X11/xinit/xinitrc.d
-XCOMM (see http://xprint.freedesktop.org/cgi-bin/bugzilla/show_bug.cgi?id=182)
-#if defined(LinuxDistribution)
-InstallNamedProg(cde_xsessiond_xprint.sh,92xprint-xpserverlist.sh,$(ETCDIR)/X11/Xsession.d)
-InstallNamedProg(cde_xsessiond_xprint.sh,92xprint-xpserverlist.sh,$(ETCDIR)/X11/xinit/xinitrc.d)
-#endif
diff --git a/nx-X11/programs/Xserver/Xprint/etc/Xsession.d/cde_xsessiond_xprint.sh b/nx-X11/programs/Xserver/Xprint/etc/Xsession.d/cde_xsessiond_xprint.sh
deleted file mode 100644
index 3fb6bba7c..000000000
--- a/nx-X11/programs/Xserver/Xprint/etc/Xsession.d/cde_xsessiond_xprint.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/sh 
-#####################################################################
-###  File:              0018.xprint
-###
-###  Default Location:  /usr/dt/config/Xsession.d/
-###
-###  Purpose:           Setup Xprint env vars
-###                     
-###  Description:       This script is invoked by means of the Xsession file
-###                     at user login. 
-###
-###  Invoked by:        /usr/dt/bin/Xsession
-###
-###  (c) Copyright 2003-2004 Roland Mainz <roland.mainz@nrubsig.org>
-###
-###  please send bugfixes or comments to http://xprint.mozdev.org/
-###
-#####################################################################
-
-
-#
-# Obtain list of Xprint servers
-#
-
-if [ -f "/etc/init.d/xprint" ] ; then
-  XPSERVERLIST="`/bin/sh /etc/init.d/xprint get_xpserverlist`"
-  export XPSERVERLIST
-fi
-
-##########################         eof       #####################
diff --git a/nx-X11/programs/Xserver/Xprint/etc/init.d/Imakefile b/nx-X11/programs/Xserver/Xprint/etc/init.d/Imakefile
deleted file mode 100644
index dedefb199..000000000
--- a/nx-X11/programs/Xserver/Xprint/etc/init.d/Imakefile
+++ /dev/null
@@ -1,97 +0,0 @@
-XCOMM $Xorg: Imakefile,v 1.2 2003/01/20 17:02:01 gisburn Exp $
-
-all:: xprint
-
-#if BuildGISWxprintglue
-XPCUSTOMGLUE=GISWxprintglue
-#elif BuildGISWxprint
-XPCUSTOMGLUE = GISWxprint
-#elif BuildDebianXprintPackage
-XPCUSTOMGLUE = DebianGlue
-#else
-XPCUSTOMGLUE = default
-#endif
-
-#if defined(SunArchitecture)
-OS_DEFINES = -DOS_SOLARIS
-#elif defined(LinuxArchitecture)
-OS_DEFINES = -DOS_LINUX
-#elif defined(AIXArchitecture)
-OS_DEFINES = -DOS_AIX
-#else
-OS_DEFINES = 
-#endif
-
-#if NothingOutsideProjectRoot
-#define EtcDir ProjectRoot/etc
-#else
-#define EtcDir /etc
-#endif
-
-ETCDIR = EtcDir
-
-MakeScriptFromCpp(xprint, -DDEF_XPCUSTOMGLUE=$(XPCUSTOMGLUE) $(OS_DEFINES) -DProjectRoot=$(PROJECTROOT))
-
-#if defined(FreeBSDArchitecture)
-InstallNamedProg(xprint,xprint,$(PROJECTROOT)/etc/rc.d)
-#else
-XCOMM Solaris, Linux, etc.
-InstallNamedProg(xprint,xprint,$(ETCDIR)/init.d)
-#endif
-
-XCOMM Create startup/shutdown links in /etc/init.d/ for Solaris
-#if defined(SunArchitecture) && (OSMajorVersion > 4)
-
-#define InstallStartupLink(rcdir,script,linkname) \
-	MakeDir($(DESTDIR)$(ETCDIR)/rcdir) ; \
-	RemoveFile($(DESTDIR)$(ETCDIR)/rcdir/linkname) ; \
-	ln -s ../init.d/script $(DESTDIR)$(ETCDIR)/rcdir/linkname
-
-install::
-	InstallStartupLink(rc0.d,xprint,K38xprint)
-	InstallStartupLink(rc1.d,xprint,K38xprint)
-	InstallStartupLink(rc2.d,xprint,S81xprint)
-	InstallStartupLink(rcS.d,xprint,K38xprint)
-#endif /* defined(SunArchitecture) && (OSMajorVersion > 4) */
-
-XCOMM Create startup/shutdown links in /etc/init.d/ for Linux
-#if defined(LinuxDistribution)
-# if (LinuxDistribution == LinuxSuSE) || \
-     (LinuxDistribution == LinuxDebian) || \
-     (LinuxDistribution == LinuxUnknown)
-XCOMM SuSE Linux(-like)
-
-#define InstallStartupLink(rcdir,script,linkname) \
-	MakeDir($(DESTDIR)$(ETCDIR)/rc.d/rcdir) ; \
-	ln -sf ../script $(DESTDIR)$(ETCDIR)/rc.d/rcdir/linkname
-
-install::
-	echo "# Installing /etc/init.d links for SuSE Linux(-like)"
-	InstallStartupLink(rc2.d,xprint,K21xprint)
-	InstallStartupLink(rc2.d,xprint,S21xprint)
-	InstallStartupLink(rc3.d,xprint,K21xprint)
-	InstallStartupLink(rc3.d,xprint,S21xprint)
-	InstallStartupLink(rc5.d,xprint,K21xprint)
-	InstallStartupLink(rc5.d,xprint,S21xprint)
-# elif LinuxDistribution == LinuxRedHat
-XCOMM RedHat Linux(-like)
-
-#define InstallStartupLink(rcdir,script,linkname) \
-	MakeDir($(DESTDIR)$(ETCDIR)/rcdir) ; \
-	ln -sf ../init.d/script $(DESTDIR)$(ETCDIR)/rcdir/linkname
-
-install::
-	echo "# Installing /etc/init.d links for RedHat Linux(-like)"
-	InstallStartupLink(rc0.d,xprint,K61xprint)
-	InstallStartupLink(rc1.d,xprint,K61xprint)
-	InstallStartupLink(rc2.d,xprint,S61xprint)
-	InstallStartupLink(rc3.d,xprint,S61xprint)
-	InstallStartupLink(rc4.d,xprint,S61xprint)
-	InstallStartupLink(rc5.d,xprint,S61xprint)
-	InstallStartupLink(rc6.d,xprint,K61xprint)
-# else
-install::
-	echo "WARNING: No links for /etc/init.d/xprint set."
-# endif /* LinuxDistribution == * */
-#endif /* defined(LinuxArchitecture) */
-
diff --git a/nx-X11/programs/Xserver/Xprint/etc/init.d/xprint.cpp b/nx-X11/programs/Xserver/Xprint/etc/init.d/xprint.cpp
deleted file mode 100644
index dbfd1e139..000000000
--- a/nx-X11/programs/Xserver/Xprint/etc/init.d/xprint.cpp
+++ /dev/null
@@ -1,1277 +0,0 @@
-XCOMM!/bin/sh
-XCOMM
-XCOMM Copyright 2002-2004 by Roland Mainz <roland.mainz@nrubsig.org>.
-XCOMM
-XCOMM This script manages the Xprint server side
-
-XCOMM Basic support for IRIX-style "chkconfig"
-XCOMM chkconfig: 2345 61 61
-XCOMM description: Startup/shutdown script for Xprint server(s)
-
-XCOMM Basic support for the Linux Standard Base Specification 1.0.0
-XCOMM (Note: The Should-Start/Stop lines are there so that this works in the
-XCOMM future, when the LSB adopts these. The X-UnitedLinux lines are there 
-XCOMM so that it works right now.)
-XCOMM## BEGIN INIT INFO
-XCOMM Provides: xprint
-XCOMM Required-Start: $local_fs $remote_fs $syslog $network
-XCOMM Required-Stop: $local_fs $remote_fs $syslog
-XCOMM Should-Start: cups lpd xfs
-XCOMM Should-Stop:  cups lpd xfs
-XCOMM X-UnitedLinux-Should-Start: cups lpd xfs
-XCOMM X-UnitedLinux-Should-Stop:  cups lpd xfs
-XCOMM Default-Start: 3 5
-XCOMM Default-Stop: 0 1 2 6
-XCOMM Description: Startup/shutdown script for Xprint server(s)
-XCOMM## END INIT INFO
-
-#undef sun
-#undef unix
-
-XCOMM###########################################################################
-XCOMM
-XCOMM This script has three main tasks:
-XCOMM 1. Start Xprint servers ("Xprt") at boot time.
-XCOMM 2. Shutdown Xprint servers when the machine is being shut down.
-XCOMM 3. Query the list of available printers.
-XCOMM
-XCOMM Additional tasks are:
-XCOMM 4. Restart ('restart'|'force-reload') and conditional restart
-XCOMM    ('condrestart'/'try-restart') for Linux support
-XCOMM 5. Wrapping of application call with setting XPSERVERLIST ('wrapper')
-XCOMM
-XCOMM Usage:
-XCOMM - Start Xprint server(s) manually:
-XCOMM   % /etc/init.d/xprint start
-XCOMM
-XCOMM - Stop Xprint server(s) manually:
-XCOMM   % /etc/init.d/xprint stop
-XCOMM
-XCOMM - Populate $XPSERVERLIST env var (for example as part of a global
-XCOMM   login script like /etc/profile or per-user login scripts like
-XCOMM   $HOME/.profile (sh/ksh/bash))
-XCOMM   % XPSERVERLIST="`/etc/init.d/xprint get_xpserverlist`"
-XCOMM   % export XPSERVERLIST
-XCOMM
-XCOMM Installation:
-XCOMM   Copy this script to /etc/init.d/xprint and make sure that it is
-XCOMM   executable. If your installation is LSB-compliant, then run
-XCOMM   % /usr/lib/lsb/install_initd /etc/init.d/xprint
-XCOMM   to start the service on startup. Otherwise, manually create links
-XCOMM   to the matching run levels.
-XCOMM   Examples:
-XCOMM     - Solaris 2.7/2.8/2.9:
-XCOMM       % cp xprint /etc/init.d/xprint
-XCOMM       % chmod a+rx /etc/init.d/xprint
-XCOMM       % ln /etc/init.d/xprint /etc/rc0.d/K38xprint
-XCOMM       % ln /etc/init.d/xprint /etc/rc1.d/K38xprint
-XCOMM       % ln /etc/init.d/xprint /etc/rc2.d/S81xprint
-XCOMM       % ln /etc/init.d/xprint /etc/rcS.d/K38xprint
-XCOMM
-XCOMM     - SuSE Linux 7.3
-XCOMM       % cp xprint /etc/init.d/xprint
-XCOMM       % chmod a+rx /etc/init.d/xprint
-XCOMM       % ln -s ../xprint /etc/init.d/rc3.d/K13xprint
-XCOMM       % ln -s ../xprint /etc/init.d/rc3.d/S12xprint
-XCOMM       % ln -s ../xprint /etc/init.d/rc5.d/K13xprint
-XCOMM       % ln -s ../xprint /etc/init.d/rc5.d/S12xprint
-XCOMM       % ln -s ../xprint /etc/init.d/rc2.d/K13xprint
-XCOMM       % ln -s ../xprint /etc/init.d/rc2.d/S12xprint
-XCOMM
-XCOMM     - SuSE Linux 6.4:
-XCOMM       % cp xprint /sbin/init.d/xprint
-XCOMM       % chmod a+rx /sbin/init.d/xprint
-XCOMM       % ln -s ../xprint /sbin/init.d/rc2.d/K20xprint
-XCOMM       % ln -s ../xprint /sbin/init.d/rc2.d/S20xprint
-XCOMM       % ln -s ../xprint /sbin/init.d/rc3.d/K20xprint
-XCOMM       % ln -s ../xprint /sbin/init.d/rc3.d/S20xprint
-XCOMM
-XCOMM   Notes: 
-XCOMM   - The Xprint servers must be started _after_ the print
-XCOMM     spooler or the server(s) may refuse to start
-XCOMM   - The script should be readable by all users to ensure that they
-XCOMM     can use the "get_xpserverlist"-option
-XCOMM
-XCOMM Custom configuration:
-XCOMM   - Edit the function setup_config() in this script to match your needs
-XCOMM
-XCOMM Known bugs/ToDo/Notes:
-XCOMM   - The shell script assumes that a Xserver can be reached via 
-XCOMM     "hostname:displaynum" where "hostname" is obtained from
-XCOMM     "/usr/bin/hostname". It may happen that a kernel firewall
-XCOMM     blocks an X connection on the same host (e.g. client && Xserver 
-XCOMM     are running on the same host).
-XCOMM     Suggested fix: Fix the firewall config.
-XCOMM     Suggested workaround: Edit this script and replace the use of 
-XCOMM     /usr/bin/hostname with "echo 'localhost'".
-XCOMM
-XCOMM###########################################################################
-XCOMM
-
-
-XCOMM###########################################################################
-
-fatal_error()
-{
-    echo "${0}: ## FATAL ERROR: ${1}" 1>&2
-    exit 1
-}
-
-error_echo()
-{
-    echo "${0}: ## ERROR: ${1}" 1>&2
-}
-
-warning_echo()
-{
-    echo "${0}: ## WARNING: ${1}" 1>&2
-}
-
-verbose_echo()
-{
-    echo "${0}: ${1}"
-}
-
-msg()
-{
-    echo "${1}"
-}
-
-XCOMM###########################################################################
-
-#ifndef OS_LINUX
-XCOMM Force use of a POSIX conformant sh 
-XCOMM (Solaris /sbin/sh is plain Bourne shell)
-[ "$1" != "posix_sh_forced" -a -x /bin/ksh  ]            && exec /bin/ksh  "$0" posix_sh_forced "$@"
-[ "$1" != "posix_sh_forced" -a -x /bin/bash ]            && exec /bin/bash --norc --noprofile "$0" posix_sh_forced "$@"
-[ "$1" != "posix_sh_forced" -a -x /usr/local/bin/ksh ]   && exec /usr/local/bin/ksh "$0" posix_sh_forced "$@"
-[ "$1" != "posix_sh_forced" -a -x /usr/local/bin/bash ]  && exec /usr/local/bin/bash --norc --noprofile "$0" posix_sh_forced "$@"
-if [ "$1" != "posix_sh_forced" ] ; then
-    echo "${0}: ## FATAL ERROR: No POSIX-shell found."  1>&2
-    exit 1
-fi
-
-shift # Drop "posix_sh_forced"
-#endif /* !OS_LINUX */
-
-XCOMM#debug
-XCOMM set -x
-
-XCOMM Change current dir to a location which is writeable by everyone
-cd /tmp
-
-XCOMM Clear some environment variables
-unset TEMP TMPDIR SCREENDIR
-
-XCOMM Set search path for commands
-export PATH=/usr/bin:/bin:/usr/sbin:/sbin
-#ifdef OS_SOLARIS
-export PATH=/usr/xpg4/bin:${PATH}
-#endif
-
-XCOMM# Try to figure-out where X11 was installed
-#if defined(OS_SOLARIS)
-XPROJECTROOT=/usr/openwin
-export OPENWINHOME=/usr/openwin
-#elif defined(OS_AIX)
-XPROJECTROOT=/usr/lpp/X11
-#else
-#if defined(ProjectRoot)
-[ -d ProjectRoot/bin ]	&& XPROJECTROOT=ProjectRoot
-#endif
-[ -d /usr/X11/bin ]     && XPROJECTROOT=/usr/X11
-[ -d /usr/X11R6/bin ]   && XPROJECTROOT=/usr/X11R6
-#endif
-XPCUSTOMGLUE=DEF_XPCUSTOMGLUE # This is used for customizing this script
-export XPROJECTROOT XPCUSTOMGLUE
-
-if [ -z "${XPROJECTROOT}" ] ; then
-    fatal_error "Unknown XProjectRoot."
-fi
-
-XCOMM Set the location of the Xprt binary we want to use.
-XPRT_BIN="${XPROJECTROOT}/bin/Xprt"
-
-XCOMM Set the location of the global file where we store the locations 
-XCOMM of the system-wide servers
-if [ -d /var/run ] ; then
-    XP_GLOBAL_SERVERS=/var/run/Xprint_servers
-else
-    XP_GLOBAL_SERVERS=/tmp/.Xprint_servers
-fi
-
-XCOMM ${LOGNAME} will not work if user su'ed into another account
-export CURRLOGNAME="$(id -u -n)"
-
-XCOMM Set location where we want to store the list of Xprint servers managed
-XCOMM by this user
-XCOMM - If we start as "root" use the global file
-XCOMM - If we start as normal user use a per-user file
-
-if [ "${CURRLOGNAME}" != "root" -a "${CURRLOGNAME}" != "" ] ; then
-    XP_PER_USER_SERVERS="/tmp/.Xprint_servers_${CURRLOGNAME}"
-    XP_SERVERS="${XP_PER_USER_SERVERS}"
-else
-    XP_SERVERS="${XP_GLOBAL_SERVERS}"
-fi
-
-XCOMM Set umask that owner can r/w all files and everyone else can read them
-umask 022
-
-XCOMM Bump limit for per-process open files to ensure that Xprt can open many many fonts
-ulimit -n 1024
-
-XCOMM###########################################################################
-
-XCOMM Get list of fonts for a given display
-get_fontlist_from_display()
-{
-    ${XPROJECTROOT}/bin/xset -display "${1}" q | 
-      awk "/Font Path:/ { i=1 ; next } i==1 { print \$0 ; i=0 }" | 
-        fontpath2fontlist
-}
-
-XCOMM Get list from a fontserver config
-get_fontlist_from_xfs_config()
-{
-    if [ ! -r "${1}" ] ; then
-        return 0
-    fi
-      
-    (        
-      cat "${1}" |
-      while read -r i ; do
-          for val in $i; do
-              case $val in
-                \#*)  break ;;
-                ?*=*) key="${val%%=*}" ;;
-                =*)   key="${tok}" ;;
-                *)    [ "${key}" = "catalogue" -a "${tok}" != "" ] && echo "${tok}" ;;
-              esac
-              tok="${val#*=}"
-          done
-      done
-    ) | tr "," "\n" | fontpath2fontlist
-}
-
-get_fontlist_from_all_xfs_configs()
-{
-    get_fontlist_from_xfs_config "/etc/openwin/fs/fontserver.cfg"
-    get_fontlist_from_xfs_config "/usr/openwin/lib/X11/fontserver.cfg"
-    get_fontlist_from_xfs_config "/etc/X11/fs-xtt/config"
-    get_fontlist_from_xfs_config "/etc/X11/fs/config"
-    get_fontlist_from_xfs_config "/etc/X11/xfs/config"
-    get_fontlist_from_xfs_config "${XPROJECTROOT}/lib/X11/fs/config"
-}
-
-get_fontlist_from_xf86config()
-{
-    srcxconf=""
-
-    XCOMM see xorg.conf(5x) manual page for the list of locations used here    
-    [ "${srcxconf}" = "" -a -f "/etc/X11/xorg.conf"  ]                      && srcxconf="/etc/X11/xorg.conf"
-    [ "${srcxconf}" = "" -a -f "/usr/X11R6/etc/X11/xorg.conf" ]             && srcxconf="/usr/X11R6/etc/X11/xorg.conf"
-    [ "${srcxconf}" = "" -a -f "/etc/X11/xorg.conf-4" ]                     && srcxconf="/etc/X11/xorg.conf-4"
-    [ "${srcxconf}" = "" -a -f "/etc/X11/xorg.conf" ]                       && srcxconf="/etc/X11/xorg.conf"
-    [ "${srcxconf}" = "" -a -f "/etc/xorg.conf" ]                           && srcxconf="/etc/xorg.conf"
-    [ "${srcxconf}" = "" -a -f "/usr/X11R6/etc/X11/xorg.conf.${hostname}" ] && srcxconf="/usr/X11R6/etc/X11/xorg.conf.${hostname}"
-    [ "${srcxconf}" = "" -a -f "/usr/X11R6/etc/X11/xorg.conf-4" ]           && srcxconf="/usr/X11R6/etc/X11/xorg.conf-4"
-    [ "${srcxconf}" = "" -a -f "/usr/X11R6/etc/X11/xorg.conf" ]             && srcxconf="/usr/X11R6/etc/X11/xorg.conf"
-    [ "${srcxconf}" = "" -a -f "/usr/X11R6/lib/X11/xorg.conf.${hostname}" ] && srcxconf="/usr/X11R6/lib/X11/xorg.conf.${hostname}"
-    [ "${srcxconf}" = "" -a -f "/usr/X11R6/lib/X11/xorg.conf-4" ]           && srcxconf="/usr/X11R6/lib/X11/xorg.conf-4"
-    [ "${srcxconf}" = "" -a -f "/usr/X11R6/lib/X11/xorg.conf" ]             && srcxconf="/usr/X11R6/lib/X11/xorg.conf"
-
-    XCOMM Xfree86 locations
-    [ "${srcxconf}" = "" -a -f "/etc/X11/XF86Config-4" ] && srcxconf="/etc/X11/XF86Config-4"
-    [ "${srcxconf}" = "" -a -f "/etc/X11/XF86Config" ]   && srcxconf="/etc/X11/XF86Config"
-
-
-    if [ "${srcxconf}" = "" ] ; then
-        return 0
-    fi
-
-    currsection=""
-    cat "${srcxconf}" |
-    while read i1 i2 i3 i4 ; do
-        # Strip "\"" from I2
-        i2="${i2#\"}" ; i2="${i2%\"}"
-
-        case "${i1}" in
-            \#*)
-                continue
-                ;;
-            'Section')
-                currsection="${i2}"
-                ;;
-            'EndSection')
-                currsection=""
-                ;;
-            'FontPath')
-                [ "$currsection" = "Files" ] && echo "${i2%:unscaled}"
-                ;;
-        esac  
-    done | egrep -v -i "tcp/|tcp4/|tcp6/|unix/"
-    
-    return 0
-}
-
-get_fontlist_from_defoma()
-{
-    # Include Debian defoma font directory where relevant
-    if [ -d "/var/lib/defoma/x-ttcidfont-conf.d/dirs" ] ; then        
-        find "/var/lib/defoma/x-ttcidfont-conf.d/dirs" -name fonts.dir |
-          while read i ; do echo "${i%/fonts.dir}" ; done
-    fi
-}
-
-XCOMM Get list of system fonts
-get_system_fontlist()
-{
-#if defined(OS_SOLARIS)
-          ## List the standard X11 fonts
-          # echo "${XPROJECTROOT}/lib/X11/fonts/F3/"
-          # echo "${XPROJECTROOT}/lib/X11/fonts/F3bitmaps/"
-          echo "${XPROJECTROOT}/lib/X11/fonts/Type1/"
-          echo "${XPROJECTROOT}/lib/X11/fonts/Type1/outline/"
-          # We cannot use /usr/openwin/lib/X11/fonts/Type1/sun/ - see
-          # http://xprint.mozdev.org/bugs/show_bug.cgi?id=5726
-          # ("Xprint doesn't start under Solaris 2.9 due *.ps files in /usr/openwin/lib/X11/fonts/Type1/sun/fonts.dir")
-          #echo "${XPROJECTROOT}/lib/X11/fonts/Type1/sun/"
-          echo "${XPROJECTROOT}/lib/X11/fonts/TrueType/"
-          echo "${XPROJECTROOT}/lib/X11/fonts/Speedo/"
-          echo "${XPROJECTROOT}/lib/X11/fonts/misc/"
-          echo "${XPROJECTROOT}/lib/X11/fonts/75dpi/"
-          echo "${XPROJECTROOT}/lib/X11/fonts/100dpi/"
-  
-          ## List all fonts in all locales installed on this machine
-          cat /usr/openwin/lib/locale/''*/OWfontpath | tr "," "\n" | sort -u
-#elif defined(OS_LINUX)
-          (
-            get_fontlist_from_defoma
-
-            get_fontlist_from_xf86config
-            
-            # Getting font paths from XFS is mainly required for compatibilty to RedHat
-            get_fontlist_from_all_xfs_configs
-                   
-            ## List all fonts in all locales installed on this machine
-            (
-              [ -d "/usr/share/fonts" ] && find /usr/share/fonts -name fonts.dir
-              find "${XPROJECTROOT}/lib/X11/fonts" -name fonts.dir 
-            ) | 
-              while read i ; do echo "${i%/fonts.dir}" ; done
-          ) | sort -u
-#else
-          ## List the standard X11 fonts
-          # (AIX should be handled like Solaris but I did not found a way to
-          # enumerate all fonts in all installed locales without scanning the
-          # dirs manually)
-          echo "${XPROJECTROOT}/lib/X11/fonts/Type1/"
-          echo "${XPROJECTROOT}/lib/X11/fonts/TrueType/"
-          echo "${XPROJECTROOT}/lib/X11/fonts/TTF/"
-          echo "${XPROJECTROOT}/lib/X11/fonts/Speedo/"
-          echo "${XPROJECTROOT}/lib/X11/fonts/misc/"
-          echo "${XPROJECTROOT}/lib/X11/fonts/75dpi/"
-          echo "${XPROJECTROOT}/lib/X11/fonts/100dpi/"
-          echo "${XPROJECTROOT}/lib/X11/fonts/"
-#endif
-}
-
-XCOMM Filter fonts per given extended regular expressions
-XCOMM (and make sure we filter any model-config fonts - they are managed by Xprt internally)
-filter_fontlist()
-{
-    egrep -- "${1}" | fgrep -v "/models/" | egrep -v -- "${2}"
-}
-
-XCOMM Filter font paths with unsupported font types
-XCOMM (such as CID fonts)
-filter_unsupported_fonts()
-{
-    egrep -v -i "/cid(/$|$)|/csl(/$|$)"
-}
-
-XCOMM Validate fontpath
-XCOMM Only return valid font path entries (note that these entries may
-XCOMM include non-file stuff like font server references)
-validate_fontlist()
-{
-    while read i ; do       
-        case "${i}" in
-            # Check if font path entry is a font server...
-            tcp/''*|tcp4/''*|tcp6/''*|unix/''*)
-                echo "${i}"
-                ;;
-            # ... if not check if the path is accessible
-            # and has a valid "fonts.dir" index
-            *)
-                [ -f "${i}/fonts.dir" ] && echo "${i}"
-                ;;
-        esac
-    done
-}
-
-XCOMM Build a comma-seperated list of fonts (font path) from a list of fonts
-fontlist2fontpath()
-{
-    fp=""
-    read fp;
-    while read i ; do
-        fp="${fp},${i}"
-    done
-    
-    echo "$fp"
-}
-
-XCOMM Build a list (one item per line) of fonts from a font path
-fontpath2fontlist()
-{
-    while read i ; do
-        echo "${i}" | tr "," "\n"
-    done
-}
-
-XCOMM Sort scaleable fonts (PS Type1 and TrueType) first in a font list
-sort_scaleable_fonts_first()
-{
-    i="$(fontlist2fontpath)"
-    # First list PS Type1 fonts...
-    echo "${i}" | fontpath2fontlist | fgrep "/Type1"
-    # ... then TrueType fonts ...
-    echo "${i}" | fontpath2fontlist | egrep -i "/TrueType|/TT(/$|$)|/TTF(/$|$)"
-    # ... then all others
-    echo "${i}" | fontpath2fontlist | egrep -v -i "/Type1|/TrueType|/TT(/$|$)|/TTF(/$|$)"
-}
-
-XCOMM Check if a X display is used by a Xserver or not
-XCOMM Known bugs:
-XCOMM - there is no way in plain bourne shell or bash (see comment about ksh93
-XCOMM   below) to test if a Xserver sits only on a socket and not on a pipe
-XCOMM - some Xserver's don't cleanup their stuff in /tmp on exit which may end
-XCOMM   in the problem that we don't detect possible free display numbers
-XCOMM   (one problem is that only ksh93 can do stuff like 
-XCOMM   "cat </dev/tcp/0.0.0.0/6001")
-CheckIfDisplayIsInUse()
-{
-    id=$1
-    
-    [ -r "/tmp/.X${id}-lock"     ] && return 0;
-    [ -r "/tmp/.X11-unix/X${id}" ] && return 0;
-    [ -r "/tmp/.X11-pipe/X${id}" ] && return 0;
-    
-    return 1;
-}
-
-lastdisplaynumreturned_store=/tmp/.Xp_last_display_returned_by_findfreexdisplaynum_${RANDOM}_${RANDOM}
-
-XCOMM Try to find a free display number
-FindFreeXDisplayNum()
-{
-    if [ -r "${lastdisplaynumreturned_store}" ] ; then
-      i="$(cat "${lastdisplaynumreturned_store}")"
-    else
-      i=32 # start at display 32
-    fi
-    
-    while [ $i -lt 127 ] ; do
-        i=$(($i + 1))
-
-        if CheckIfDisplayIsInUse $i ; then
-            true
-        else
-            echo "$i"
-            echo "$i" >"${lastdisplaynumreturned_store}"
-            return 0
-        fi
-    done
-
-    # Using "magic" value of 189 here due lack of a better solution
-    echo "189"
-    echo "189" >"${lastdisplaynumreturned_store}"    
-    return 0
-}
-
-XCOMM Check if a process exists or not
-pexists()
-{
-    [ "$1" = "" ] && return 1;
-
-    # Use of /proc would be better but not all platforms (like AIX) have procfs
-    [ "$(ps -p $1 | fgrep $1)" != "" ] && return 0;
-    return 1
-}
-
-XCOMM Check if there is a spooler running...
-is_spooler_running()
-{
-    # This covers Linux lpd, CUPS, Solaris and AIX 4.x - but what about
-    # AIX 5.x, HP-UX and IRIX ?
-
-    [ "$(ps -A | egrep 'lpd|lpsched|cupsd|qdaemon' | fgrep -v 'grep')" != "" ] && return 0;
-    return 1
-}
-
-XCOMM Wait until the spooler system has been started (but not more than 30secs)
-wait_for_print_spooler()
-{
-    for i in 1 2 3 4 5 6 7 8 9 10 ; do
-        is_spooler_running && return 0;
-        sleep 3
-    done
-    
-    return 0
-}
-
-lock_server_registry()
-{
-    lock_counter=0 # counts in 1/100s
-    waiting_for_lock_msg_send="false"
-    while ! mkdir "${XP_SERVERS}.lock" 2>/dev/null ; do
-        # print notice after 2 seconds
-        if [ ${lock_counter} -gt 200 -a "${waiting_for_lock_msg_send}" != "true" ] ; then
-            echo "${0}: waiting for lock(=${XP_SERVERS}.lock)..."
-            waiting_for_lock_msg_send="true"
-        fi
-
-        # tread the lock as "broken" after 20 seconds
-        if [ ${lock_counter} -gt 2000 ] ; then
-            echo "${0}: WARNING: lock timeout for lock(=${XP_SERVERS}.lock)."
-            return 0
-        fi
-                
-        if [ -x /bin/usleep ] ; then
-            /bin/usleep 200000
-            lock_counter=$((${lock_counter} + 20)) # 20/100s
-        else
-            sleep 1
-            lock_counter=$((${lock_counter} + 100)) # 100/100s
-        fi
-    done
-}
-
-unlock_server_registry()
-{
-    rmdir "${XP_SERVERS}.lock"
-}
-
-XCOMM Kill dead registry locks (silently!)
-kill_dead_registry_locks()
-{
-    rm -Rf "${XP_SERVERS}.lock"
-}
-
-XCOMM Start Xprint servers
-start_servers()
-{
-    # Write registry "intro" ...
-    lock_server_registry
-    echo "# Xprint server list"                               >>"${XP_SERVERS}"
-    echo "# File is for private use for ${0}."                >>"${XP_SERVERS}"
-    echo "# Do not edit, rely on the content or file format." >>"${XP_SERVERS}"
-    unlock_server_registry
-
-    hostname="$(hostname)"
-
-    default_fontpath="$(get_system_fontlist | fontlist2fontpath)"
-    default_fontpath_acceptpattern=".*";
-    default_fontpath_rejectpattern="_No_Match_"; # Match nothing   
-    
-    curr=0
-    while [ $curr -lt $num_xpstart ] ; do
-        if [ "${xpstart_remote_server[$curr]}" != "" ] ; then
-            # Remote Xprt, just put the entry into the registry
-            lock_server_registry
-            echo "display=${xpstart_remote_server[$curr]}" >>"${XP_SERVERS}"
-            unlock_server_registry
-        else
-            # Run block in seperate process to avoid that changes to the
-            # xpstart_* variables affect the next cycle
-            (
-              # Use defaults if there are no special options
-              [ "${xpstart_fontpath[$curr]}"               = "" ] &&               xpstart_fontpath[$curr]="${default_fontpath}";
-              [ "${xpstart_fontpath_acceptpattern[$curr]}" = "" ] && xpstart_fontpath_acceptpattern[$curr]="$default_fontpath_acceptpattern";
-              [ "${xpstart_fontpath_rejectpattern[$curr]}" = "" ] && xpstart_fontpath_rejectpattern[$curr]="$default_fontpath_rejectpattern";
-              [ "${xpstart_displayid[$curr]}"              = "" ] &&              xpstart_displayid[$curr]="$(FindFreeXDisplayNum)"       
-              [ "${xpstart_logger[$curr]}"                 = "" ] &&                 xpstart_logger[$curr]="logger -p lpr.notice -t Xprt_${xpstart_displayid[$curr]}";
-              [ "${xpstart_logfile[$curr]}"                = "" ] &&                xpstart_logfile[$curr]="/dev/null";
-              [ "${xpstart_xprt_binary[$curr]}"            = "" ] &&            xpstart_xprt_binary[$curr]="${XPRT_BIN}";
-              if [ "${xpstart_xprt_binary[$curr]}" = "/usr/openwin/bin/Xprt" -o "$(uname -s)" = "SunOS" ] ; then
-                  # Solaris /usr/openwin/bin/Xprt does not support "-nolisten tcp"
-                  # yet nor is it possible to run a Xserver on a unix socket only
-                  # in Solaris since access to the unix domain sockets in
-                  # /tmp/.X11-pipe and /tmp/.X11-unix is restricted to applications
-                  # with group-id "root" (e.g. the Xprt server would need to be
-                  # setgid "root" that plain users can start it listening on a unix
-                  # socket only)
-                  [ "${xpstart_options[$curr]}" = "" ] && xpstart_options[$curr]="-ac -pn"
-              else
-                  [ "${xpstart_options[$curr]}" = "" ] && xpstart_options[$curr]="-ac -pn -nolisten tcp"
-              fi
-
-              # Check if the Xprt binary is available                                     
-              if [ ! -x "${xpstart_xprt_binary[$curr]}" ] ; then                                            
-                  error_echo "Can't find \"${xpstart_xprt_binary[$curr]}\"."                                  
-                  exit 1 # exit block                                                               
-              fi                                                                          
-
-              # Verify and set location of font encodings directory file
-              if [ "${xpstart_font_encodings_dir[$curr]}" = "" ] ; then
-                  if [ -f "${XPROJECTROOT}/lib/X11/fonts/xf86encodings/encodings.dir" ] ; then
-                      xpstart_font_encodings_dir[$curr]="${XPROJECTROOT}/lib/X11/fonts/xf86encodings/encodings.dir"
-                  else
-                      xpstart_font_encodings_dir[$curr]="${XPROJECTROOT}/lib/X11/fonts/encodings/encodings.dir";
-                  fi
-              fi
-
-              unset FONT_ENCODINGS_DIRECTORY
-              if [ ! -f "${xpstart_font_encodings_dir[$curr]}" ] ; then
-                  warning_echo "Can't find \"${xpstart_font_encodings_dir[$curr]}\", TrueType font support may not work."
-              fi
-
-              export FONT_ENCODINGS_DIRECTORY="${xpstart_font_encodings_dir[$curr]}"
-
-              # Generate font path (containing only valid font path elements)
-              # from input font path and filter expressions
-              curr_fp=$(echo "${xpstart_fontpath[$curr]}" | 
-                        fontpath2fontlist |
-                        filter_fontlist "${xpstart_fontpath_acceptpattern[$curr]}" "${xpstart_fontpath_rejectpattern[$curr]}" | 
-                        filter_unsupported_fonts |
-                        sort_scaleable_fonts_first | 
-                        validate_fontlist | 
-                        fontlist2fontpath)
-
-              # Set Xserver auditing level option
-              unset curr_audit
-              if [ "${xpstart_auditlevel[$curr]}" != "" ] ; then
-                  curr_audit="-audit ${xpstart_auditlevel[$curr]}"
-              fi
-
-              # Set Xprt -XpFile option
-              unset curr_xpfile
-              if [ "${xpstart_xpfile[$curr]}" != "" ] ; then
-                  curr_xpfile="-XpFile ${xpstart_xpfile[$curr]}"
-              fi
-
-              # Set custom XPCONFIGDIR (if there is one)
-              unset XPCONFIGDIR
-              if [ "${xpstart_xpconfigdir[$curr]}" != "" ] ; then
-                  export XPCONFIGDIR="${xpstart_xpconfigdir[$curr]}"
-              fi
-
-              # If someone uses "-nolisten tcp" make sure we do not add a hostname to force local transport
-              if [ "$(echo "${xpstart_options[$curr]}" | egrep "nolisten.*tcp")" != "" ] ; then
-                  xp_display=":${xpstart_displayid[$curr]}"
-              else
-                  xp_display="${hostname}:${xpstart_displayid[$curr]}"
-              fi
-              
-              (
-                (
-                  "${xpstart_xprt_binary[$curr]}" \
-                      ${xpstart_options[$curr]} \
-                      ${curr_xpfile} ${curr_audit} \
-                      -fp ${curr_fp} \
-                      :${xpstart_displayid[$curr]} &
-                  server_pid="$!"
- 
-                  # Append the new server to the registry
-                  lock_server_registry
-                  echo "display=${xp_display} display_id=${xpstart_displayid[$curr]} pid=${server_pid}" >>"${XP_SERVERS}"
-                  unlock_server_registry
-                  
-                  wait
-                  echo "Xprint server pid=${server_pid} done, exitcode=$?."
-                  
-                  # Remove the dead server from the registry
-                  # (only if the registry still exists - if /etc/init.d/xprint stop" gets called the registry
-                  # will be removed - and we should not re-create it afterwards...)
-                  lock_server_registry
-                  if [ -f "${XP_SERVERS}" ] ; then
-                      x="$(cat "${XP_SERVERS}")" # Store content of file "${XP_SERVERS}" in var "x"
-                      echo "${x}" | fgrep -v "display_id=${xpstart_displayid[$curr]} pid=${server_pid}" >"${XP_SERVERS}"
-                  fi
-                  unlock_server_registry                 
-                ) 2>&1 | while read i ; do echo "$i" | tee -a "${xpstart_logfile[$curr]}" | ${xpstart_logger[$curr]} ; done
-              ) &
-            )
-        fi
-        
-        curr=$(($curr + 1))
-    done
-    
-    # Remove tmp. file created by |FindFreeXDisplayNum()|
-    rm -f "${lastdisplaynumreturned_store}"
-
-    # Done.
-    lock_server_registry
-    echo "# EOF." >>"${XP_SERVERS}"
-    unlock_server_registry
-    return 0
-}
-
-
-XCOMM Convenience function to check setup and start Xprt server(s)
-do_start()
-{
-    if [ -f "${XP_SERVERS}" ] ; then
-        numservers="$(do_get_xpserverlist | wc -l)"
-        if [ ${numservers} -gt 0 ] ; then
-            verbose_echo "Xprint servers are already running."
-            return 0
-        else
-            verbose_echo "Old server registry found, cleaning-up..."
-            do_stop
-        fi
-    fi
-    
-    # Check if we can write the registry file
-    touch "${XP_SERVERS}" 2>/dev/null
-    if [ ! -f "${XP_SERVERS}" ] ; then
-        error_echo "Cannot create \"${XP_SERVERS}\"."
-        # exit code 4 = user had insufficient privilege (LSB)
-        exit 4
-    fi
-
-    if ! setup_config ; then
-        error_echo "setup_config failed."
-        exit 1
-    fi
-
-    # Provide two paths here - one which simply starts the Xprt servers,
-    # assuming that there is a print spooler already running (or that 
-    # ${XPCONFIG}/C/print/Xprinters provides static print queue entries
-    # (like for the PSspooldir print model)) and a 2nd path which
-    # explicitly checks if the print queue daemons are running
-    if true ; then
-        msg "Starting Xprint servers: Xprt."
-        start_servers
-    else 
-        # Continue in the background if there is no spooler running yet (that
-        # we don't hold off the boot process nor run in a possible race-condition
-        # when /etc/init.d/lpd was not called yet but the runlevel script waits
-        # for us to finish first ...
-        if is_spooler_running ; then
-            msg "Starting Xprint servers: Xprt."
-            start_servers
-        else
-            msg "Starting Xprint servers (in the background): Xprt."
-            (wait_for_print_spooler ; start_servers) &
-            sleep 5
-        fi
-    fi
-    
-    if [ "${CURRLOGNAME}" = "root" -a -d /var/lock/subsys/ ] ; then
-        touch /var/lock/subsys/xprint
-    fi
-}
-
-XCOMM Convenience function to stop Xprt server(s)
-do_stop()
-{
-    msg "Stopping Xprint servers: Xprt."
-
-    lock_server_registry
-    if [ -f "${XP_SERVERS}" ] ; then       
-        reglist="$(cat "${XP_SERVERS}")"
-        rm -f "${XP_SERVERS}"
-    fi
-    unlock_server_registry
-    
-    if [ "${reglist}" != "" ] ; then
-        echo "${reglist}" |
-          grep "^display=.*:.* pid=[0-9]*$" |
-          while read i ; do
-              (
-                eval ${i}
-                if pexists ${pid} ; then 
-                    kill ${pid}
-                fi
-
-                # Remove the X sockets/pipes which are not in use anymore
-                # (It would be better if the Xservers would cleanup this
-                # automatically, but most Xservers do not do that... ;-(
-                # Note that this will not work on Solaris where applications
-                # must run with groupid="root" if they want to write into
-                # /tmp/.X11-unix/ and/or /tmp/.X11-pipe/)
-                if [ "${display_id}" != "" ] ; then
-                    rm -f "/tmp/.X${display_id}-lock"     2>/dev/null
-                    rm -f "/tmp/.X11-unix/X${display_id}" 2>/dev/null
-                    rm -f "/tmp/.X11-pipe/X${display_id}" 2>/dev/null
-                fi 
-              )
-          done
-    fi
-
-    if [ "${CURRLOGNAME}" = "root" -a -d /var/lock/subsys/ ] ; then
-        rm -f /var/lock/subsys/xprint
-    fi
-    
-    # Remove any outstanding (dead) locks and cleanup
-    rm -f "${XP_SERVERS}"
-    kill_dead_registry_locks
-}
-
-XCOMM Convenience function to obtain a list of available Xprint servers
-do_get_xpserverlist()
-{
-    if [ -f "${XP_PER_USER_SERVERS}" -o -f "${XP_GLOBAL_SERVERS}" ] ; then
-        xpserverlist=$(
-          # Enumerate both per-user and global servers (in that order)
-          (
-            [ -f "${XP_PER_USER_SERVERS}" ]  && cat "${XP_PER_USER_SERVERS}"
-            [ -f "${XP_GLOBAL_SERVERS}"   ]  && cat "${XP_GLOBAL_SERVERS}"
-          ) |
-            egrep "^display=.*:.* pid=[0-9]*$|^display=.*:[0-9]*$" |
-              while read i ; do
-                  (
-                    pid="none"
-                    eval ${i}
-                    # Check if the Xprt process exists (if possible)
-                    if [ "$pid" != "none" ] ; then
-                        if pexists ${pid} ; then
-                            echo ${display}
-                        fi
-                    else
-                        echo ${display}
-                    fi
-                  )
-              done | tr "\n" " "
-          )
-        # Only produce output if we have some entries...
-        [ "${xpserverlist}" != "" ] && echo "${xpserverlist}"
-    fi
-}
-
-do_restart()
-{
-    msg "Restarting Xprint server(s): Xprt."
-    do_stop
-    sleep 1
-    do_start
-}
-
-do_diag()
-{
-    echo "##### Diag start $(date)."
-    
-    # General info
-    echo "## General info start."
-    (
-      echo "PATH=\"${PATH}\""
-      echo "TZ=\"${TZ}\""
-      echo "LANG=\"${LANG}\""
-      echo "uname -a=\"$(uname -a)\""
-      echo "uname -s=\"$(uname -s)\""
-      echo "uname -p=\"$(uname -p)\""
-      echo "uname -i=\"$(uname -i)\""
-      echo "uname -m=\"$(uname -m)\""
-      echo "has /etc/SuSE-release ... $([ -f "/etc/SuSE-release" ] && echo "yes" || echo "no")"
-      echo "has /etc/redhat-release ... $([ -f "/etc/redhat-release" ] && echo "yes" || echo "no")"
-      echo "has /etc/debian_version ... $([ -f "/etc/debian_version" ] && echo "yes" || echo "no")"
-      echo "how many Xprt servers are running ...$(ps -ef | fgrep Xprt | fgrep -v "grep" | wc -l)"
-    ) 2>&1 | while read i ; do echo "  $i" ; done
-    echo "## General info end."
-    
-    # Testing font paths
-    echo "## Testing font paths start."
-    (
-      get_system_fontlist |
-          filter_unsupported_fonts |
-          sort_scaleable_fonts_first | 
-          validate_fontlist | while read d ; do
-          echo "#### Testing \"${d}\" ..."
-          if [ ! -d "$d" ] ; then
-              echo "# Error: $d does not exists."
-              continue
-          fi
-          if [ ! -r "$d" ] ; then
-              echo "# Error: $d not readable."
-              continue
-          fi
-          if [ ! -f "${d}/fonts.dir" ] ; then
-              echo "# Error: ${d}/fonts.dir not found."
-              continue
-          else
-              if [ ! -r "${d}/fonts.dir" ] ; then
-                  echo "# Error: ${d}/fonts.dir not readable."
-                  continue
-              fi
-          fi
-          if [ -f "${d}/fonts.alias" ] ; then
-              if [ ! -r "${d}/fonts.alias" ] ; then
-                  echo "# Error: ${d}/fonts.alias not readable."
-              fi
-          fi
-
-          if [ "$(cat "${d}/fonts.dir" | fgrep 'cursor')" != "" ] ; then
-              echo "${d}/fonts.dir has cursor font."
-          fi
-          if [ "$(cat "${d}/fonts.dir" | fgrep 'fixed')" != "" ] ; then
-              echo "${d}/fonts.dir has fixed font."
-          fi
-
-          if [ -r "${d}/fonts.alias" ] ; then 
-              if [ "$(cat "${d}/fonts.alias" | fgrep 'cursor')" != "" ] ; then
-                  echo "${d}/fonts.alias has cursor font."
-              fi
-              if [ "$(cat "${d}/fonts.alias" | fgrep 'fixed')" != "" ] ; then
-                  echo "${d}/fonts.alias has fixed font."
-              fi
-          fi
-
-          linenum=0
-          cat "${d}/fonts.dir" | while read i1 i2 i3 i4 ; do
-              linenum=$((${linenum} + 1))
-              [ ${linenum} -eq 1 ] && continue
-
-              if [ ! -f "${d}/${i1}" ] ; then
-                  echo "ERROR: ${d}/fonts.dir line ${linenum} has non-exististant font \"${i1}\" (=\"${i1} ${i2} ${i3} ${i4}\")"
-              fi
-          done
-      done
-    ) 2>&1 | while read i ; do echo "  $i" ; done
-    echo "## Testing font paths end."
-    
-    echo "##### Diag End $(date)."
-}
-
-XCOMM Set platform-defaults for setup_config()
-setup_config_defaults()
-{
-    curr_num_xpstart="${1}"
-    
-    #### Defaults for Linux/Solaris
-    # Start Xprt using builtin XPCONFIGDIR at a free display numer
-    # (Solaris(=SunOS5.x)'s /usr/openwin/bin/Xprt supports TrueType fonts,
-    # therefore we don't need to filter them)
-                      xpstart_fontpath[${curr_num_xpstart}]="";
-        xpstart_fontpath_acceptpattern[${curr_num_xpstart}]=".*";
-        xpstart_fontpath_rejectpattern[${curr_num_xpstart}]="/Speedo|/F3bitmaps|/F3";
-                     xpstart_displayid[${curr_num_xpstart}]="";
-                   xpstart_xpconfigdir[${curr_num_xpstart}]="";
-                        xpstart_xpfile[${curr_num_xpstart}]="";
-                    xpstart_auditlevel[${curr_num_xpstart}]="4";
-                       xpstart_options[${curr_num_xpstart}]="";
-                        xpstart_logger[${curr_num_xpstart}]="";
-    # Check whether we have /dev/stderr (needed for old AIX + old Debian)
-    if [ -w "/dev/stderr" ] ; then
-                       xpstart_logfile[${curr_num_xpstart}]="/dev/stderr";
-    else
-                       xpstart_logfile[${curr_num_xpstart}]="/dev/tty";
-    fi
-                   xpstart_xprt_binary[${curr_num_xpstart}]="";
-
-    # Custom rules for the GISWxprintglue package on Solaris
-    # (which uses Solaris's /usr/openwin/bin/Xprt but a custom config)
-    if [ "${XPCUSTOMGLUE}" = "GISWxprintglue" ] ; then
-        xpstart_xpconfigdir[${curr_num_xpstart}]="/opt/GISWxprintglue/server/etc/XpConfig"
-        xpstart_xprt_binary[${curr_num_xpstart}]="/usr/openwin/bin/Xprt"
-    fi
-    # Custom rules for the GISWxprint package on Solaris
-    # (which uses both it's own Xprt and a custom config)
-    if [ "${XPCUSTOMGLUE}" = "GISWxprint" ] ; then
-        xpstart_xpconfigdir[${curr_num_xpstart}]="/opt/GISWxprint/server/etc/XpConfig"
-        xpstart_xprt_binary[${curr_num_xpstart}]="/opt/GISWxprint/bin/Xprt"
-        xpstart_font_encodings_dir[${curr_num_xpstart}]="/opt/GISWxprint/lib/X11/fonts/encodings/encodings.dir"
-    fi
-    
-    #######################################################
-    ###
-    ### Debian Xprint package default configuration
-    ###
-    if [ "${XPCUSTOMGLUE}" = "DebianGlue" ] ; then
-        # Set XPCONFIGDIR=/usr/share/Xprint/xserver
-        xpstart_xpconfigdir[${curr_num_xpstart}]="/usr/share/Xprint/xserver";
-
-        # Use fixed display ID (":64"), or else all client programs will have to be
-        # restarted simply to update XPSERVERLIST to the latest ID when upgrading,
-        # which would be a nightmare.
-        xpstart_displayid[${curr_num_xpstart}]=64;
-
-        # Do not send any messages to console
-        xpstart_logfile[${curr_num_xpstart}]="/dev/null";
-
-        # By default use binary provided by Debian's "xprt-xprintorg" package
-        # (=/usr/bin/Xprt), otherwise leave blank (e.g. use script's default
-        # (=/usr/X11R6/bin/Xprt))
-        if [ -x "/usr/bin/Xprt" ] ; then
-            xpstart_xprt_binary[${curr_num_xpstart}]="/usr/bin/Xprt";
-        fi
-    fi
-    ###
-    ### End Debian default configuration
-    ###
-    #######################################################
-}
-
-fetch_etc_initd_xprint_envvars()
-{
-    curr_num_xpstart="${1}"
-
-    ## Process some $ETC_INITD_XPRINT_* vars after all which may be used by
-    # a user to override the hardcoded values here when starting Xprt per-user
-    # (a more flexible way is to provide an own setup config script in
-    # "~./Xprint_per_user_startup" - see above)
-    if [ "${ETC_INITD_XPRINT_XPRT_PATH}" != "" ] ; then
-        xpstart_xprt_binary[${curr_num_xpstart}]="${ETC_INITD_XPRINT_XPRT_PATH}"
-    fi
-    if [ "${ETC_INITD_XPRINT_XPCONFIGDIR}" != "" ] ; then
-        xpstart_xpconfigdir[${curr_num_xpstart}]="${ETC_INITD_XPRINT_XPCONFIGDIR}"
-    fi
-    if [ "${ETC_INITD_XPRINT_XPFILE}" != "" ] ; then
-        xpstart_xpfile[${curr_num_xpstart}]="${ETC_INITD_XPRINT_XPFILE}"
-    fi
-    if [ "${ETC_INITD_XPRINT_LOGFILE}" != "" ] ; then
-        xpstart_logfile[${curr_num_xpstart}]="${ETC_INITD_XPRINT_LOGFILE}"
-    fi
-    if [ "${ETC_INITD_XPRINT_DISPLAYID}" != "" ] ; then
-        xpstart_displayid[${curr_num_xpstart}]="${ETC_INITD_XPRINT_DISPLAYID}"
-    fi
-    if [ "${ETC_INITD_XPRINT_FONTPATH}" != "" ] ; then
-        xpstart_fontpath[${curr_num_xpstart}]="${ETC_INITD_XPRINT_FONTPATH}"
-    fi
-    if [ "${ETC_INITD_XPRINT_XPRT_OPTIONS}" != "" ] ; then
-        xpstart_options[${curr_num_xpstart}]="${ETC_INITD_XPRINT_XPRT_OPTIONS}"
-    fi
-    if [ "${ETC_INITD_XPRINT_AUDITLEVEL}" != "" ] ; then
-        xpstart_auditlevel[${curr_num_xpstart}]="${ETC_INITD_XPRINT_AUDITLEVEL}"
-    fi
-    if [ "${ETC_INITD_XPRINT_XF86ENCODINGSDIR}" != "" ] ; then
-        xpstart_font_encodings_dir[${curr_num_xpstart}]="${ETC_INITD_XPRINT_XF86ENCODINGSDIR}"
-    fi
-}
-
-XCOMM###########################################################################
-XCOMM setup_config() sets the configuration parameters used to start one
-XCOMM or more Xprint servers ("Xprt").
-XCOMM The following variables are used:
-XCOMM - "num_xpstart" - number of servers to start
-XCOMM - "xpstart_fontpath[index]" - custom font path. Leave blank if you want
-XCOMM   the platform-specific default
-XCOMM - "xpstart_fontpath_acceptpattern[index]" - extended regular expression
-XCOMM   (see egrep(1)) used to filter the font path - items only pass this
-XCOMM   filter if they match the pattern (leave blank if you want to filter
-XCOMM   nothing)
-XCOMM - "xpstart_fontpath_rejectpattern[index]" - extended regular expression
-XCOMM   (see egrep(1)) used to filter the font path - items only pass this
-XCOMM   filter if they do not match the pattern (leave blank if you want to
-XCOMM   filter nothing)
-XCOMM - "xpstart_font_encodings_dir[index]" - location of "encodings.dir".
-XCOMM   Leave blank to use the default.
-XCOMM - "xpstart_displayid[index]" - display id to use for the Xprint server
-XCOMM   (leave blank to choose the next available free display id)
-XCOMM - "xpstart_xpconfigdir[index]" - value for custom XPCONFIGDIR (leave blank
-XCOMM   if you don not want that that XPCONFIGDIR is set at Xprt startup)
-XCOMM - "xpstart_xpfile[index]" - value used for Xprt's "-XpFile" option (leave
-XCOMM   blank if you do not want to set this option)
-XCOMM - "xpstart_auditlevel[index]" - set Xserver auditing level (leave blank to
-XCOMM   use no auditing)
-XCOMM - "xpstart_options[index]" - set further Xprt options (leave blank to set
-XCOMM   no further options)
-XCOMM - "xpstart_logger[index]" - utility which gets stderr/stdout messages from
-XCOMM   Xprt and sends them to a logging daemon. Leave blank to use /usr/bin/logger
-XCOMM   to send such messages to the lpr.notice syslog)
-XCOMM - "xpstart_logfile[index]" - log file to append stderr/stdout messages from
-XCOMM   Xprt to. Leave blank to send messages to /dev/null
-XCOMM - "xpstart_xprt_binary[index]" - set custom Xprt binary (leave blank to use
-XCOMM   the platform-specifc default)
-setup_config()
-{
-    num_xpstart=0;
-    
-    if [ "${ETC_INITD_XPRINT_CUSTOM_SETUP_CONFIG}" != "" ] ; then
-        user_cfg="${ETC_INITD_XPRINT_CUSTOM_SETUP_CONFIG}"
-    else
-        user_cfg="${HOME}/.Xprint_per_user_startup"
-    fi
-    
-    # Source per-user ~/.Xprint_per_user_startup file if there is one
-    # (and do not use the script's defaults below)
-    if [ -r "${user_cfg}" ] ; then
-        # Define API version which should be checked by ${HOME}/.Xprint_per_user_startup
-        # ${HOME}/.Xprint_per_user_startup should bail-out if the version differ
-        etc_initd_xprint_api_version=2
-        
-        # Source per-user settings script
-        . "${user_cfg}"
-        
-        # done with setting the config for per-user Xprt instances
-        return 0;
-    else
-        # Use /etc/init.d/xprint's builtin config
-        # Each entry should start with |setup_config_defaults| to pull the
-        # platform defaults and finish with |num_xpstart=$(($num_xpstart + 1))|
-        # to end the entry
-        
-        # Set platform-defaults
-        setup_config_defaults "${num_xpstart}"
-
-        ## -- snip --
-
-        # Admins can put their stuff "in" here...
-
-        ## -- snip --
-
-        # Override script's builtin values with those a user may set via the
-        # $ETC_INIITD_XPRINT_* env vars
-        fetch_etc_initd_xprint_envvars "${num_xpstart}"
-
-        num_xpstart=$((${num_xpstart} + 1))
-
-        return 0;
-    fi
-
-    #### Sample 1:
-    # # Start Xprt on a free display ID with custom XPCONFIGDIR and without
-    # # Speedo and TrueType fonts
-    #    xpstart_fontpath_rejectpattern[$num_xpstart]="/Speedo|/TrueType|/TT(/$|$)|/TTF(/$|$)";
-    #               xpstart_xpconfigdir[$num_xpstart]="/home/gisburn/cwork/Xprint/Xprt_config/XpConfig";
-    #                xpstart_auditlevel[$num_xpstart]="4";
-    #                   xpstart_options[$num_xpstart]="-ac -pn";
-    #num_xpstart=$(($num_xpstart + 1))
-
-
-    #### Sample 2: 
-    # # Start Xprt without TrueType fonts on a display 55 with custom
-    # # XPCONFIGDIR
-    #    xpstart_fontpath_rejectpattern[$num_xpstart]="/TrueType|/TT(/$|$)|/TTF(/$|$)";
-    #                 xpstart_displayid[$num_xpstart]=55;
-    #               xpstart_xpconfigdir[$num_xpstart]="/home/gisburn/cwork/Xprint/Xprt_config/XpConfig";
-    #                xpstart_auditlevel[$num_xpstart]=4;
-    #                   xpstart_options[$num_xpstart]="-ac -pn";
-    #num_xpstart=$(($num_xpstart + 1))
-
-    #### Sample 3: 
-    # # Start Xprt without TrueType fonts on a display 56 with custom
-    # # XPCONFIGDIR and alternate "Xprinters" file
-    #    xpstart_fontpath_rejectpattern[$num_xpstart]="/TrueType|/TT(/$|$)|/TTF(/$|$)";
-    #                 xpstart_displayid[$num_xpstart]=56;
-    #               xpstart_xpconfigdir[$num_xpstart]="/etc/XpConfig/default";
-    #                    xpstart_xpfile[$num_xpstart]="/etc/XpConfig/default/Xprinters_test2"
-    #                xpstart_auditlevel[$num_xpstart]="4";
-    #                   xpstart_options[$num_xpstart]="-ac -pn";
-    #               xpstart_xprt_binary[$num_xpstart]="";
-    #num_xpstart=$(($num_xpstart + 1))
-
-    #### Sample 4:
-    # # Start Xprt with Solaris ISO-8859-7 (greek(="el") locale) fonts on
-    # # display 57
-    #                  xpstart_fontpath[$num_xpstart]="/usr/openwin/lib/locale/iso_8859_7/X11/fonts/75dpi,/usr/openwin/lib/locale/iso_8859_7/X11/fonts/Type1,/usr/openwin/lib/X11/fonts/misc/";
-    #    xpstart_fontpath_acceptpattern[$num_xpstart]="";
-    #    xpstart_fontpath_rejectpattern[$num_xpstart]="_No_Match_";
-    #                 xpstart_displayid[$num_xpstart]="57";
-    #                xpstart_auditlevel[$num_xpstart]="4";
-    #                   xpstart_options[$num_xpstart]="-ac -pn";
-    #num_xpstart=$(($num_xpstart + 1))
-
-    #### Sample 5:
-    # # Start Xprt with the font list of an existing Xserver (excluding Speedo fonts) on
-    # # display 58
-    # # Note that this only works within a X session. At system boot time
-    # # there will be no $DISPLAY to fetch the information from!!
-    #                  xpstart_fontpath[$num_xpstart]="$(get_fontlist_from_display ${DISPLAY} | fontlist2fontpath)";
-    #    xpstart_fontpath_acceptpattern[$num_xpstart]="";
-    #    xpstart_fontpath_rejectpattern[$num_xpstart]="";
-    #                 xpstart_displayid[$num_xpstart]="58";
-    #               xpstart_xpconfigdir[$num_xpstart]="";
-    #                xpstart_auditlevel[$num_xpstart]="4";
-    #                   xpstart_options[$num_xpstart]="-ac -pn";
-    #               xpstart_xprt_binary[$num_xpstart]="";
-    #num_xpstart=$(($num_xpstart + 1))
-
-    #### Sample 6:
-    # # List remote Xprt's here 
-    # # (note that there is no test to check whether these DISPLAYs are valid!)
-    #             xpstart_remote_server[$num_xpstart]="sera:12"    ; num_xpstart=$(($num_xpstart + 1))
-    #             xpstart_remote_server[$num_xpstart]="gandalf:19" ; num_xpstart=$(($num_xpstart + 1))   
-}
-
-XCOMM###########################################################################
-
-XCOMM Main
-case "$1" in
-    ## Start Xprint servers
-    'start')
-        do_start
-        ;;
-
-    ## Stop Xprint servers
-    # Note that this does _not_ kill Xprt instances started using this script 
-    # by non-root users
-    'stop')
-        do_stop
-        ;;
-
-    ## Restart Xprint servers
-    'restart'|'force-reload')
-        do_restart
-        ;;
-
-    ## Reload configuration without stopping and restarting
-    'reload')
-        # not supported
-        msg "reload not supported, use 'restart' or 'force-reload'"
-        exit 3
-        ;;
-
-    ## Restart Xprint only if it is already running
-    'condrestart'|'try-restart')
-        # only restart if it is already running
-        [ -f /var/lock/subsys/xprint ] && do_restart || :
-        ;;
-    
-    ## Get list of all Xprint servers for this user
-    # (incl. per-user and system-wide instances)    
-    'get_xpserverlist')
-        do_get_xpserverlist
-        ;;
-
-    ## Get status of Xprint servers, RedHat-style
-    'status')
-        x="$(do_get_xpserverlist)"
-        if [ "${x}" != "" ] ; then
-            msg "Xprint (${x}) is running..."
-            exit 0
-        else
-            msg "Xprint is stopped"
-            exit 3
-        fi 
-        ;;
-        
-    ## Wrapper
-    'wrapper')
-        cmd="${2}"
-        [ "${cmd}" = "" ] && fatal_error "No command given."
-        shift ; shift
-        export XPSERVERLIST="$(do_get_xpserverlist)"
-        [ "${XPSERVERLIST}" = "" ] && fatal_error "No Xprint servers found."
-        exec "${cmd}" "$@"
-        ;;
-
-    ## Wrapper for "xplsprinters"
-    'lsprinters')
-        [                  "${ETC_INITD_XPRINT_XPLSPRINTERS_PATH}" != "" ] && cmd="${ETC_INITD_XPRINT_XPLSPRINTERS_PATH}"
-        [ "${cmd}" = "" -a "${XPCUSTOMGLUE}" = "GISWxprintglue"          ] && cmd="/opt/GISWxprintglue/bin/xplsprinters"
-        [ "${cmd}" = "" -a "${XPCUSTOMGLUE}" = "GISWxprint"              ] && cmd="/opt/GISWxprint/bin/xplsprinters"
-        [ "${cmd}" = "" -a "${XPROJECTROOT}" != ""                       ] && cmd="${XPROJECTROOT}/bin/xplsprinters"
-        [ "${cmd}" = ""                                                  ] && cmd="xplsprinters"
-
-        shift
-        export XPSERVERLIST="$(do_get_xpserverlist)"
-        [ "${XPSERVERLIST}" = "" ] && fatal_error "No Xprint servers found."
-        exec "${cmd}" "$@"
-        ;;
-
-    ## Diagnostics
-    'diag')
-        do_diag
-        ;;
-    
-    ## Print usage
-    *)
-        msg "Usage: $0 { start | stop | restart | reload | force-reload | status | condrestart | try-restart | wrapper | lsprinters | get_xpserverlist | diag }"
-        exit 2
-esac
-exit 0
-
-XCOMM EOF.
diff --git a/nx-X11/programs/Xserver/Xprint/etc/profile.d/Imakefile b/nx-X11/programs/Xserver/Xprint/etc/profile.d/Imakefile
deleted file mode 100644
index a70824c8d..000000000
--- a/nx-X11/programs/Xserver/Xprint/etc/profile.d/Imakefile
+++ /dev/null
@@ -1,14 +0,0 @@
-XCOMM $Xorg: Imakefile,v 1.1 2002/10/31 14:42:52 gisburn Exp $
-
-#if NothingOutsideProjectRoot
-#define EtcDir ProjectRoot/etc
-#else
-#define EtcDir /etc
-#endif
-
-ETCDIR = EtcDir
-
-all::
-
-InstallNamedProg(xprint.csh,xprint.csh,$(ETCDIR)/profile.d)
-InstallNamedProg(xprint.sh,xprint.sh,$(ETCDIR)/profile.d)
diff --git a/nx-X11/programs/Xserver/Xprint/etc/profile.d/xprint.csh b/nx-X11/programs/Xserver/Xprint/etc/profile.d/xprint.csh
deleted file mode 100644
index 7cc675840..000000000
--- a/nx-X11/programs/Xserver/Xprint/etc/profile.d/xprint.csh
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# /etc/profile.d/xprint.csh
-#
-# Copyright (c) 2002-2004 by Roland Mainz <roland.mainz@nrubsig.org>
-# please send bugfixes or comments to http://xprint.mozdev.org/
-
-
-#
-# Obtain list of Xprint servers
-#
-
-if ( -f /etc/init.d/xprint ) then
-  setenv XPSERVERLIST "`/bin/sh /etc/init.d/xprint get_xpserverlist`"
-endif
-
-# /etc/profile.d/xprint.csh ends here.
diff --git a/nx-X11/programs/Xserver/Xprint/etc/profile.d/xprint.sh b/nx-X11/programs/Xserver/Xprint/etc/profile.d/xprint.sh
deleted file mode 100644
index b5b46c1e7..000000000
--- a/nx-X11/programs/Xserver/Xprint/etc/profile.d/xprint.sh
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# /etc/profile.d/xprint.sh
-#
-# Copyright (c) 2002-2004 by Roland Mainz <roland.mainz@nrubsig.org>
-# please send bugfixes or comments to http://xprint.mozdev.org/
-
-#
-# Obtain list of Xprint servers
-#
-
-if [ -f "/etc/init.d/xprint" ] ; then
-  XPSERVERLIST="`/bin/sh /etc/init.d/xprint get_xpserverlist`"
-  export XPSERVERLIST
-fi
-
-# /etc/profile.d/xprint.sh ends here.