Imported nx-X11-3.1.0-1.tar.gznx-X11/3.1.0-1

Summary: Imported nx-X11-3.1.0-1.tar.gz
Keywords:

Imported nx-X11-3.1.0-1.tar.gz
into Git repository

8 files changed, 1498 insertions, 0 deletions

diff --git a/nx-X11/programs/Xserver/Xprint/etc/Imakefile b/nx-X11/programs/Xserver/Xprint/etc/Imakefile
new file mode 100644
index 000000000..6a6e02a29
--- /dev/null
+++ b/nx-X11/programs/Xserver/Xprint/etc/Imakefile
@@ -0,0 +1,24 @@
+XCOMM $Xorg: Imakefile,v 1.1 2002/10/31 14:42:52 gisburn Exp $
+#define IHaveSubdirs
+#define PassCDebugFlags CDEBUGFLAGS="$(CDEBUGFLAGS)"
+
+XCOMM Check if OS has /etc/profile.d/
+XCOMM Note that Debian Linux does not have /etc/profile.d/
+#ifndef HasEtcProfileDir
+# ifdef LinuxArchitecture
+#  if (LinuxDistribution != LinuxDebian) || BuildFullXprintDistrib
+#   define HasEtcProfileDir YES
+#  endif
+# else
+#  define HasEtcProfileDir NO
+# endif
+#endif
+
+#if HasEtcProfileDir
+SUBDIRS = init.d profile.d Xsession.d
+#else
+SUBDIRS = init.d Xsession.d
+#endif
+
+MakeSubdirs($(SUBDIRS))
+DependSubdirs($(SUBDIRS))
diff --git a/nx-X11/programs/Xserver/Xprint/etc/Xsession.d/Imakefile b/nx-X11/programs/Xserver/Xprint/etc/Xsession.d/Imakefile
new file mode 100644
index 000000000..55a07175e
--- /dev/null
+++ b/nx-X11/programs/Xserver/Xprint/etc/Xsession.d/Imakefile
@@ -0,0 +1,24 @@
+XCOMM $Xorg: Imakefile,v 1.1 2003/01/25 14:42:52 gisburn Exp $
+
+#if NothingOutsideProjectRoot
+#define EtcDir ProjectRoot/etc
+#else
+#define EtcDir /etc
+#endif
+
+ETCDIR = EtcDir
+
+all::
+
+XCOMM Install glue for Xprint on Solaris/CDE1.x and CDE on AIX
+#if (defined(SunArchitecture) && (OSMajorVersion > 4)) || defined(IBMArchitecture)
+InstallNamedProg(cde_xsessiond_xprint.sh,0018.xprint,/usr/dt/config/Xsession.d)
+#endif
+
+XCOMM Install xdm startup glue for Xprint on Linux. Note that not all Linux
+XCOMM platforms have /etc/X11/Xsession.d/ and/or /etc/X11/xinit/xinitrc.d
+XCOMM (see http://xprint.freedesktop.org/cgi-bin/bugzilla/show_bug.cgi?id=182)
+#if defined(LinuxDistribution)
+InstallNamedProg(cde_xsessiond_xprint.sh,92xprint-xpserverlist.sh,$(ETCDIR)/X11/Xsession.d)
+InstallNamedProg(cde_xsessiond_xprint.sh,92xprint-xpserverlist.sh,$(ETCDIR)/X11/xinit/xinitrc.d)
+#endif
diff --git a/nx-X11/programs/Xserver/Xprint/etc/Xsession.d/cde_xsessiond_xprint.sh b/nx-X11/programs/Xserver/Xprint/etc/Xsession.d/cde_xsessiond_xprint.sh
new file mode 100644
index 000000000..3fb6bba7c
--- /dev/null
+++ b/nx-X11/programs/Xserver/Xprint/etc/Xsession.d/cde_xsessiond_xprint.sh
@@ -0,0 +1,30 @@
+#!/bin/sh 
+#####################################################################
+###  File:              0018.xprint
+###
+###  Default Location:  /usr/dt/config/Xsession.d/
+###
+###  Purpose:           Setup Xprint env vars
+###                     
+###  Description:       This script is invoked by means of the Xsession file
+###                     at user login. 
+###
+###  Invoked by:        /usr/dt/bin/Xsession
+###
+###  (c) Copyright 2003-2004 Roland Mainz <roland.mainz@nrubsig.org>
+###
+###  please send bugfixes or comments to http://xprint.mozdev.org/
+###
+#####################################################################
+
+
+#
+# Obtain list of Xprint servers
+#
+
+if [ -f "/etc/init.d/xprint" ] ; then
+  XPSERVERLIST="`/bin/sh /etc/init.d/xprint get_xpserverlist`"
+  export XPSERVERLIST
+fi
+
+##########################         eof       #####################
diff --git a/nx-X11/programs/Xserver/Xprint/etc/init.d/Imakefile b/nx-X11/programs/Xserver/Xprint/etc/init.d/Imakefile
new file mode 100644
index 000000000..dedefb199
--- /dev/null
+++ b/nx-X11/programs/Xserver/Xprint/etc/init.d/Imakefile
@@ -0,0 +1,97 @@
+XCOMM $Xorg: Imakefile,v 1.2 2003/01/20 17:02:01 gisburn Exp $
+
+all:: xprint
+
+#if BuildGISWxprintglue
+XPCUSTOMGLUE=GISWxprintglue
+#elif BuildGISWxprint
+XPCUSTOMGLUE = GISWxprint
+#elif BuildDebianXprintPackage
+XPCUSTOMGLUE = DebianGlue
+#else
+XPCUSTOMGLUE = default
+#endif
+
+#if defined(SunArchitecture)
+OS_DEFINES = -DOS_SOLARIS
+#elif defined(LinuxArchitecture)
+OS_DEFINES = -DOS_LINUX
+#elif defined(AIXArchitecture)
+OS_DEFINES = -DOS_AIX
+#else
+OS_DEFINES = 
+#endif
+
+#if NothingOutsideProjectRoot
+#define EtcDir ProjectRoot/etc
+#else
+#define EtcDir /etc
+#endif
+
+ETCDIR = EtcDir
+
+MakeScriptFromCpp(xprint, -DDEF_XPCUSTOMGLUE=$(XPCUSTOMGLUE) $(OS_DEFINES) -DProjectRoot=$(PROJECTROOT))
+
+#if defined(FreeBSDArchitecture)
+InstallNamedProg(xprint,xprint,$(PROJECTROOT)/etc/rc.d)
+#else
+XCOMM Solaris, Linux, etc.
+InstallNamedProg(xprint,xprint,$(ETCDIR)/init.d)
+#endif
+
+XCOMM Create startup/shutdown links in /etc/init.d/ for Solaris
+#if defined(SunArchitecture) && (OSMajorVersion > 4)
+
+#define InstallStartupLink(rcdir,script,linkname) \
+	MakeDir($(DESTDIR)$(ETCDIR)/rcdir) ; \
+	RemoveFile($(DESTDIR)$(ETCDIR)/rcdir/linkname) ; \
+	ln -s ../init.d/script $(DESTDIR)$(ETCDIR)/rcdir/linkname
+
+install::
+	InstallStartupLink(rc0.d,xprint,K38xprint)
+	InstallStartupLink(rc1.d,xprint,K38xprint)
+	InstallStartupLink(rc2.d,xprint,S81xprint)
+	InstallStartupLink(rcS.d,xprint,K38xprint)
+#endif /* defined(SunArchitecture) && (OSMajorVersion > 4) */
+
+XCOMM Create startup/shutdown links in /etc/init.d/ for Linux
+#if defined(LinuxDistribution)
+# if (LinuxDistribution == LinuxSuSE) || \
+     (LinuxDistribution == LinuxDebian) || \
+     (LinuxDistribution == LinuxUnknown)
+XCOMM SuSE Linux(-like)
+
+#define InstallStartupLink(rcdir,script,linkname) \
+	MakeDir($(DESTDIR)$(ETCDIR)/rc.d/rcdir) ; \
+	ln -sf ../script $(DESTDIR)$(ETCDIR)/rc.d/rcdir/linkname
+
+install::
+	echo "# Installing /etc/init.d links for SuSE Linux(-like)"
+	InstallStartupLink(rc2.d,xprint,K21xprint)
+	InstallStartupLink(rc2.d,xprint,S21xprint)
+	InstallStartupLink(rc3.d,xprint,K21xprint)
+	InstallStartupLink(rc3.d,xprint,S21xprint)
+	InstallStartupLink(rc5.d,xprint,K21xprint)
+	InstallStartupLink(rc5.d,xprint,S21xprint)
+# elif LinuxDistribution == LinuxRedHat
+XCOMM RedHat Linux(-like)
+
+#define InstallStartupLink(rcdir,script,linkname) \
+	MakeDir($(DESTDIR)$(ETCDIR)/rcdir) ; \
+	ln -sf ../init.d/script $(DESTDIR)$(ETCDIR)/rcdir/linkname
+
+install::
+	echo "# Installing /etc/init.d links for RedHat Linux(-like)"
+	InstallStartupLink(rc0.d,xprint,K61xprint)
+	InstallStartupLink(rc1.d,xprint,K61xprint)
+	InstallStartupLink(rc2.d,xprint,S61xprint)
+	InstallStartupLink(rc3.d,xprint,S61xprint)
+	InstallStartupLink(rc4.d,xprint,S61xprint)
+	InstallStartupLink(rc5.d,xprint,S61xprint)
+	InstallStartupLink(rc6.d,xprint,K61xprint)
+# else
+install::
+	echo "WARNING: No links for /etc/init.d/xprint set."
+# endif /* LinuxDistribution == * */
+#endif /* defined(LinuxArchitecture) */
+
diff --git a/nx-X11/programs/Xserver/Xprint/etc/init.d/xprint.cpp b/nx-X11/programs/Xserver/Xprint/etc/init.d/xprint.cpp
new file mode 100644
index 000000000..dbfd1e139
--- /dev/null
+++ b/nx-X11/programs/Xserver/Xprint/etc/init.d/xprint.cpp
@@ -0,0 +1,1277 @@
+XCOMM!/bin/sh
+XCOMM
+XCOMM Copyright 2002-2004 by Roland Mainz <roland.mainz@nrubsig.org>.
+XCOMM
+XCOMM This script manages the Xprint server side
+
+XCOMM Basic support for IRIX-style "chkconfig"
+XCOMM chkconfig: 2345 61 61
+XCOMM description: Startup/shutdown script for Xprint server(s)
+
+XCOMM Basic support for the Linux Standard Base Specification 1.0.0
+XCOMM (Note: The Should-Start/Stop lines are there so that this works in the
+XCOMM future, when the LSB adopts these. The X-UnitedLinux lines are there 
+XCOMM so that it works right now.)
+XCOMM## BEGIN INIT INFO
+XCOMM Provides: xprint
+XCOMM Required-Start: $local_fs $remote_fs $syslog $network
+XCOMM Required-Stop: $local_fs $remote_fs $syslog
+XCOMM Should-Start: cups lpd xfs
+XCOMM Should-Stop:  cups lpd xfs
+XCOMM X-UnitedLinux-Should-Start: cups lpd xfs
+XCOMM X-UnitedLinux-Should-Stop:  cups lpd xfs
+XCOMM Default-Start: 3 5
+XCOMM Default-Stop: 0 1 2 6
+XCOMM Description: Startup/shutdown script for Xprint server(s)
+XCOMM## END INIT INFO
+
+#undef sun
+#undef unix
+
+XCOMM###########################################################################
+XCOMM
+XCOMM This script has three main tasks:
+XCOMM 1. Start Xprint servers ("Xprt") at boot time.
+XCOMM 2. Shutdown Xprint servers when the machine is being shut down.
+XCOMM 3. Query the list of available printers.
+XCOMM
+XCOMM Additional tasks are:
+XCOMM 4. Restart ('restart'|'force-reload') and conditional restart
+XCOMM    ('condrestart'/'try-restart') for Linux support
+XCOMM 5. Wrapping of application call with setting XPSERVERLIST ('wrapper')
+XCOMM
+XCOMM Usage:
+XCOMM - Start Xprint server(s) manually:
+XCOMM   % /etc/init.d/xprint start
+XCOMM
+XCOMM - Stop Xprint server(s) manually:
+XCOMM   % /etc/init.d/xprint stop
+XCOMM
+XCOMM - Populate $XPSERVERLIST env var (for example as part of a global
+XCOMM   login script like /etc/profile or per-user login scripts like
+XCOMM   $HOME/.profile (sh/ksh/bash))
+XCOMM   % XPSERVERLIST="`/etc/init.d/xprint get_xpserverlist`"
+XCOMM   % export XPSERVERLIST
+XCOMM
+XCOMM Installation:
+XCOMM   Copy this script to /etc/init.d/xprint and make sure that it is
+XCOMM   executable. If your installation is LSB-compliant, then run
+XCOMM   % /usr/lib/lsb/install_initd /etc/init.d/xprint
+XCOMM   to start the service on startup. Otherwise, manually create links
+XCOMM   to the matching run levels.
+XCOMM   Examples:
+XCOMM     - Solaris 2.7/2.8/2.9:
+XCOMM       % cp xprint /etc/init.d/xprint
+XCOMM       % chmod a+rx /etc/init.d/xprint
+XCOMM       % ln /etc/init.d/xprint /etc/rc0.d/K38xprint
+XCOMM       % ln /etc/init.d/xprint /etc/rc1.d/K38xprint
+XCOMM       % ln /etc/init.d/xprint /etc/rc2.d/S81xprint
+XCOMM       % ln /etc/init.d/xprint /etc/rcS.d/K38xprint
+XCOMM
+XCOMM     - SuSE Linux 7.3
+XCOMM       % cp xprint /etc/init.d/xprint
+XCOMM       % chmod a+rx /etc/init.d/xprint
+XCOMM       % ln -s ../xprint /etc/init.d/rc3.d/K13xprint
+XCOMM       % ln -s ../xprint /etc/init.d/rc3.d/S12xprint
+XCOMM       % ln -s ../xprint /etc/init.d/rc5.d/K13xprint
+XCOMM       % ln -s ../xprint /etc/init.d/rc5.d/S12xprint
+XCOMM       % ln -s ../xprint /etc/init.d/rc2.d/K13xprint
+XCOMM       % ln -s ../xprint /etc/init.d/rc2.d/S12xprint
+XCOMM
+XCOMM     - SuSE Linux 6.4:
+XCOMM       % cp xprint /sbin/init.d/xprint
+XCOMM       % chmod a+rx /sbin/init.d/xprint
+XCOMM       % ln -s ../xprint /sbin/init.d/rc2.d/K20xprint
+XCOMM       % ln -s ../xprint /sbin/init.d/rc2.d/S20xprint
+XCOMM       % ln -s ../xprint /sbin/init.d/rc3.d/K20xprint
+XCOMM       % ln -s ../xprint /sbin/init.d/rc3.d/S20xprint
+XCOMM
+XCOMM   Notes: 
+XCOMM   - The Xprint servers must be started _after_ the print
+XCOMM     spooler or the server(s) may refuse to start
+XCOMM   - The script should be readable by all users to ensure that they
+XCOMM     can use the "get_xpserverlist"-option
+XCOMM
+XCOMM Custom configuration:
+XCOMM   - Edit the function setup_config() in this script to match your needs
+XCOMM
+XCOMM Known bugs/ToDo/Notes:
+XCOMM   - The shell script assumes that a Xserver can be reached via 
+XCOMM     "hostname:displaynum" where "hostname" is obtained from
+XCOMM     "/usr/bin/hostname". It may happen that a kernel firewall
+XCOMM     blocks an X connection on the same host (e.g. client && Xserver 
+XCOMM     are running on the same host).
+XCOMM     Suggested fix: Fix the firewall config.
+XCOMM     Suggested workaround: Edit this script and replace the use of 
+XCOMM     /usr/bin/hostname with "echo 'localhost'".
+XCOMM
+XCOMM###########################################################################
+XCOMM
+
+
+XCOMM###########################################################################
+
+fatal_error()
+{
+    echo "${0}: ## FATAL ERROR: ${1}" 1>&2
+    exit 1
+}
+
+error_echo()
+{
+    echo "${0}: ## ERROR: ${1}" 1>&2
+}
+
+warning_echo()
+{
+    echo "${0}: ## WARNING: ${1}" 1>&2
+}
+
+verbose_echo()
+{
+    echo "${0}: ${1}"
+}
+
+msg()
+{
+    echo "${1}"
+}
+
+XCOMM###########################################################################
+
+#ifndef OS_LINUX
+XCOMM Force use of a POSIX conformant sh 
+XCOMM (Solaris /sbin/sh is plain Bourne shell)
+[ "$1" != "posix_sh_forced" -a -x /bin/ksh  ]            && exec /bin/ksh  "$0" posix_sh_forced "$@"
+[ "$1" != "posix_sh_forced" -a -x /bin/bash ]            && exec /bin/bash --norc --noprofile "$0" posix_sh_forced "$@"
+[ "$1" != "posix_sh_forced" -a -x /usr/local/bin/ksh ]   && exec /usr/local/bin/ksh "$0" posix_sh_forced "$@"
+[ "$1" != "posix_sh_forced" -a -x /usr/local/bin/bash ]  && exec /usr/local/bin/bash --norc --noprofile "$0" posix_sh_forced "$@"
+if [ "$1" != "posix_sh_forced" ] ; then
+    echo "${0}: ## FATAL ERROR: No POSIX-shell found."  1>&2
+    exit 1
+fi
+
+shift # Drop "posix_sh_forced"
+#endif /* !OS_LINUX */
+
+XCOMM#debug
+XCOMM set -x
+
+XCOMM Change current dir to a location which is writeable by everyone
+cd /tmp
+
+XCOMM Clear some environment variables
+unset TEMP TMPDIR SCREENDIR
+
+XCOMM Set search path for commands
+export PATH=/usr/bin:/bin:/usr/sbin:/sbin
+#ifdef OS_SOLARIS
+export PATH=/usr/xpg4/bin:${PATH}
+#endif
+
+XCOMM# Try to figure-out where X11 was installed
+#if defined(OS_SOLARIS)
+XPROJECTROOT=/usr/openwin
+export OPENWINHOME=/usr/openwin
+#elif defined(OS_AIX)
+XPROJECTROOT=/usr/lpp/X11
+#else
+#if defined(ProjectRoot)
+[ -d ProjectRoot/bin ]	&& XPROJECTROOT=ProjectRoot
+#endif
+[ -d /usr/X11/bin ]     && XPROJECTROOT=/usr/X11
+[ -d /usr/X11R6/bin ]   && XPROJECTROOT=/usr/X11R6
+#endif
+XPCUSTOMGLUE=DEF_XPCUSTOMGLUE # This is used for customizing this script
+export XPROJECTROOT XPCUSTOMGLUE
+
+if [ -z "${XPROJECTROOT}" ] ; then
+    fatal_error "Unknown XProjectRoot."
+fi
+
+XCOMM Set the location of the Xprt binary we want to use.
+XPRT_BIN="${XPROJECTROOT}/bin/Xprt"
+
+XCOMM Set the location of the global file where we store the locations 
+XCOMM of the system-wide servers
+if [ -d /var/run ] ; then
+    XP_GLOBAL_SERVERS=/var/run/Xprint_servers
+else
+    XP_GLOBAL_SERVERS=/tmp/.Xprint_servers
+fi
+
+XCOMM ${LOGNAME} will not work if user su'ed into another account
+export CURRLOGNAME="$(id -u -n)"
+
+XCOMM Set location where we want to store the list of Xprint servers managed
+XCOMM by this user
+XCOMM - If we start as "root" use the global file
+XCOMM - If we start as normal user use a per-user file
+
+if [ "${CURRLOGNAME}" != "root" -a "${CURRLOGNAME}" != "" ] ; then
+    XP_PER_USER_SERVERS="/tmp/.Xprint_servers_${CURRLOGNAME}"
+    XP_SERVERS="${XP_PER_USER_SERVERS}"
+else
+    XP_SERVERS="${XP_GLOBAL_SERVERS}"
+fi
+
+XCOMM Set umask that owner can r/w all files and everyone else can read them
+umask 022
+
+XCOMM Bump limit for per-process open files to ensure that Xprt can open many many fonts
+ulimit -n 1024
+
+XCOMM###########################################################################
+
+XCOMM Get list of fonts for a given display
+get_fontlist_from_display()
+{
+    ${XPROJECTROOT}/bin/xset -display "${1}" q | 
+      awk "/Font Path:/ { i=1 ; next } i==1 { print \$0 ; i=0 }" | 
+        fontpath2fontlist
+}
+
+XCOMM Get list from a fontserver config
+get_fontlist_from_xfs_config()
+{
+    if [ ! -r "${1}" ] ; then
+        return 0
+    fi
+      
+    (        
+      cat "${1}" |
+      while read -r i ; do
+          for val in $i; do
+              case $val in
+                \#*)  break ;;
+                ?*=*) key="${val%%=*}" ;;
+                =*)   key="${tok}" ;;
+                *)    [ "${key}" = "catalogue" -a "${tok}" != "" ] && echo "${tok}" ;;
+              esac
+              tok="${val#*=}"
+          done
+      done
+    ) | tr "," "\n" | fontpath2fontlist
+}
+
+get_fontlist_from_all_xfs_configs()
+{
+    get_fontlist_from_xfs_config "/etc/openwin/fs/fontserver.cfg"
+    get_fontlist_from_xfs_config "/usr/openwin/lib/X11/fontserver.cfg"
+    get_fontlist_from_xfs_config "/etc/X11/fs-xtt/config"
+    get_fontlist_from_xfs_config "/etc/X11/fs/config"
+    get_fontlist_from_xfs_config "/etc/X11/xfs/config"
+    get_fontlist_from_xfs_config "${XPROJECTROOT}/lib/X11/fs/config"
+}
+
+get_fontlist_from_xf86config()
+{
+    srcxconf=""
+
+    XCOMM see xorg.conf(5x) manual page for the list of locations used here    
+    [ "${srcxconf}" = "" -a -f "/etc/X11/xorg.conf"  ]                      && srcxconf="/etc/X11/xorg.conf"
+    [ "${srcxconf}" = "" -a -f "/usr/X11R6/etc/X11/xorg.conf" ]             && srcxconf="/usr/X11R6/etc/X11/xorg.conf"
+    [ "${srcxconf}" = "" -a -f "/etc/X11/xorg.conf-4" ]                     && srcxconf="/etc/X11/xorg.conf-4"
+    [ "${srcxconf}" = "" -a -f "/etc/X11/xorg.conf" ]                       && srcxconf="/etc/X11/xorg.conf"
+    [ "${srcxconf}" = "" -a -f "/etc/xorg.conf" ]                           && srcxconf="/etc/xorg.conf"
+    [ "${srcxconf}" = "" -a -f "/usr/X11R6/etc/X11/xorg.conf.${hostname}" ] && srcxconf="/usr/X11R6/etc/X11/xorg.conf.${hostname}"
+    [ "${srcxconf}" = "" -a -f "/usr/X11R6/etc/X11/xorg.conf-4" ]           && srcxconf="/usr/X11R6/etc/X11/xorg.conf-4"
+    [ "${srcxconf}" = "" -a -f "/usr/X11R6/etc/X11/xorg.conf" ]             && srcxconf="/usr/X11R6/etc/X11/xorg.conf"
+    [ "${srcxconf}" = "" -a -f "/usr/X11R6/lib/X11/xorg.conf.${hostname}" ] && srcxconf="/usr/X11R6/lib/X11/xorg.conf.${hostname}"
+    [ "${srcxconf}" = "" -a -f "/usr/X11R6/lib/X11/xorg.conf-4" ]           && srcxconf="/usr/X11R6/lib/X11/xorg.conf-4"
+    [ "${srcxconf}" = "" -a -f "/usr/X11R6/lib/X11/xorg.conf" ]             && srcxconf="/usr/X11R6/lib/X11/xorg.conf"
+
+    XCOMM Xfree86 locations
+    [ "${srcxconf}" = "" -a -f "/etc/X11/XF86Config-4" ] && srcxconf="/etc/X11/XF86Config-4"
+    [ "${srcxconf}" = "" -a -f "/etc/X11/XF86Config" ]   && srcxconf="/etc/X11/XF86Config"
+
+
+    if [ "${srcxconf}" = "" ] ; then
+        return 0
+    fi
+
+    currsection=""
+    cat "${srcxconf}" |
+    while read i1 i2 i3 i4 ; do
+        # Strip "\"" from I2
+        i2="${i2#\"}" ; i2="${i2%\"}"
+
+        case "${i1}" in
+            \#*)
+                continue
+                ;;
+            'Section')
+                currsection="${i2}"
+                ;;
+            'EndSection')
+                currsection=""
+                ;;
+            'FontPath')
+                [ "$currsection" = "Files" ] && echo "${i2%:unscaled}"
+                ;;
+        esac  
+    done | egrep -v -i "tcp/|tcp4/|tcp6/|unix/"
+    
+    return 0
+}
+
+get_fontlist_from_defoma()
+{
+    # Include Debian defoma font directory where relevant
+    if [ -d "/var/lib/defoma/x-ttcidfont-conf.d/dirs" ] ; then        
+        find "/var/lib/defoma/x-ttcidfont-conf.d/dirs" -name fonts.dir |
+          while read i ; do echo "${i%/fonts.dir}" ; done
+    fi
+}
+
+XCOMM Get list of system fonts
+get_system_fontlist()
+{
+#if defined(OS_SOLARIS)
+          ## List the standard X11 fonts
+          # echo "${XPROJECTROOT}/lib/X11/fonts/F3/"
+          # echo "${XPROJECTROOT}/lib/X11/fonts/F3bitmaps/"
+          echo "${XPROJECTROOT}/lib/X11/fonts/Type1/"
+          echo "${XPROJECTROOT}/lib/X11/fonts/Type1/outline/"
+          # We cannot use /usr/openwin/lib/X11/fonts/Type1/sun/ - see
+          # http://xprint.mozdev.org/bugs/show_bug.cgi?id=5726
+          # ("Xprint doesn't start under Solaris 2.9 due *.ps files in /usr/openwin/lib/X11/fonts/Type1/sun/fonts.dir")
+          #echo "${XPROJECTROOT}/lib/X11/fonts/Type1/sun/"
+          echo "${XPROJECTROOT}/lib/X11/fonts/TrueType/"
+          echo "${XPROJECTROOT}/lib/X11/fonts/Speedo/"
+          echo "${XPROJECTROOT}/lib/X11/fonts/misc/"
+          echo "${XPROJECTROOT}/lib/X11/fonts/75dpi/"
+          echo "${XPROJECTROOT}/lib/X11/fonts/100dpi/"
+  
+          ## List all fonts in all locales installed on this machine
+          cat /usr/openwin/lib/locale/''*/OWfontpath | tr "," "\n" | sort -u
+#elif defined(OS_LINUX)
+          (
+            get_fontlist_from_defoma
+
+            get_fontlist_from_xf86config
+            
+            # Getting font paths from XFS is mainly required for compatibilty to RedHat
+            get_fontlist_from_all_xfs_configs
+                   
+            ## List all fonts in all locales installed on this machine
+            (
+              [ -d "/usr/share/fonts" ] && find /usr/share/fonts -name fonts.dir
+              find "${XPROJECTROOT}/lib/X11/fonts" -name fonts.dir 
+            ) | 
+              while read i ; do echo "${i%/fonts.dir}" ; done
+          ) | sort -u
+#else
+          ## List the standard X11 fonts
+          # (AIX should be handled like Solaris but I did not found a way to
+          # enumerate all fonts in all installed locales without scanning the
+          # dirs manually)
+          echo "${XPROJECTROOT}/lib/X11/fonts/Type1/"
+          echo "${XPROJECTROOT}/lib/X11/fonts/TrueType/"
+          echo "${XPROJECTROOT}/lib/X11/fonts/TTF/"
+          echo "${XPROJECTROOT}/lib/X11/fonts/Speedo/"
+          echo "${XPROJECTROOT}/lib/X11/fonts/misc/"
+          echo "${XPROJECTROOT}/lib/X11/fonts/75dpi/"
+          echo "${XPROJECTROOT}/lib/X11/fonts/100dpi/"
+          echo "${XPROJECTROOT}/lib/X11/fonts/"
+#endif
+}
+
+XCOMM Filter fonts per given extended regular expressions
+XCOMM (and make sure we filter any model-config fonts - they are managed by Xprt internally)
+filter_fontlist()
+{
+    egrep -- "${1}" | fgrep -v "/models/" | egrep -v -- "${2}"
+}
+
+XCOMM Filter font paths with unsupported font types
+XCOMM (such as CID fonts)
+filter_unsupported_fonts()
+{
+    egrep -v -i "/cid(/$|$)|/csl(/$|$)"
+}
+
+XCOMM Validate fontpath
+XCOMM Only return valid font path entries (note that these entries may
+XCOMM include non-file stuff like font server references)
+validate_fontlist()
+{
+    while read i ; do       
+        case "${i}" in
+            # Check if font path entry is a font server...
+            tcp/''*|tcp4/''*|tcp6/''*|unix/''*)
+                echo "${i}"
+                ;;
+            # ... if not check if the path is accessible
+            # and has a valid "fonts.dir" index
+            *)
+                [ -f "${i}/fonts.dir" ] && echo "${i}"
+                ;;
+        esac
+    done
+}
+
+XCOMM Build a comma-seperated list of fonts (font path) from a list of fonts
+fontlist2fontpath()
+{
+    fp=""
+    read fp;
+    while read i ; do
+        fp="${fp},${i}"
+    done
+    
+    echo "$fp"
+}
+
+XCOMM Build a list (one item per line) of fonts from a font path
+fontpath2fontlist()
+{
+    while read i ; do
+        echo "${i}" | tr "," "\n"
+    done
+}
+
+XCOMM Sort scaleable fonts (PS Type1 and TrueType) first in a font list
+sort_scaleable_fonts_first()
+{
+    i="$(fontlist2fontpath)"
+    # First list PS Type1 fonts...
+    echo "${i}" | fontpath2fontlist | fgrep "/Type1"
+    # ... then TrueType fonts ...
+    echo "${i}" | fontpath2fontlist | egrep -i "/TrueType|/TT(/$|$)|/TTF(/$|$)"
+    # ... then all others
+    echo "${i}" | fontpath2fontlist | egrep -v -i "/Type1|/TrueType|/TT(/$|$)|/TTF(/$|$)"
+}
+
+XCOMM Check if a X display is used by a Xserver or not
+XCOMM Known bugs:
+XCOMM - there is no way in plain bourne shell or bash (see comment about ksh93
+XCOMM   below) to test if a Xserver sits only on a socket and not on a pipe
+XCOMM - some Xserver's don't cleanup their stuff in /tmp on exit which may end
+XCOMM   in the problem that we don't detect possible free display numbers
+XCOMM   (one problem is that only ksh93 can do stuff like 
+XCOMM   "cat </dev/tcp/0.0.0.0/6001")
+CheckIfDisplayIsInUse()
+{
+    id=$1
+    
+    [ -r "/tmp/.X${id}-lock"     ] && return 0;
+    [ -r "/tmp/.X11-unix/X${id}" ] && return 0;
+    [ -r "/tmp/.X11-pipe/X${id}" ] && return 0;
+    
+    return 1;
+}
+
+lastdisplaynumreturned_store=/tmp/.Xp_last_display_returned_by_findfreexdisplaynum_${RANDOM}_${RANDOM}
+
+XCOMM Try to find a free display number
+FindFreeXDisplayNum()
+{
+    if [ -r "${lastdisplaynumreturned_store}" ] ; then
+      i="$(cat "${lastdisplaynumreturned_store}")"
+    else
+      i=32 # start at display 32
+    fi
+    
+    while [ $i -lt 127 ] ; do
+        i=$(($i + 1))
+
+        if CheckIfDisplayIsInUse $i ; then
+            true
+        else
+            echo "$i"
+            echo "$i" >"${lastdisplaynumreturned_store}"
+            return 0
+        fi
+    done
+
+    # Using "magic" value of 189 here due lack of a better solution
+    echo "189"
+    echo "189" >"${lastdisplaynumreturned_store}"    
+    return 0
+}
+
+XCOMM Check if a process exists or not
+pexists()
+{
+    [ "$1" = "" ] && return 1;
+
+    # Use of /proc would be better but not all platforms (like AIX) have procfs
+    [ "$(ps -p $1 | fgrep $1)" != "" ] && return 0;
+    return 1
+}
+
+XCOMM Check if there is a spooler running...
+is_spooler_running()
+{
+    # This covers Linux lpd, CUPS, Solaris and AIX 4.x - but what about
+    # AIX 5.x, HP-UX and IRIX ?
+
+    [ "$(ps -A | egrep 'lpd|lpsched|cupsd|qdaemon' | fgrep -v 'grep')" != "" ] && return 0;
+    return 1
+}
+
+XCOMM Wait until the spooler system has been started (but not more than 30secs)
+wait_for_print_spooler()
+{
+    for i in 1 2 3 4 5 6 7 8 9 10 ; do
+        is_spooler_running && return 0;
+        sleep 3
+    done
+    
+    return 0
+}
+
+lock_server_registry()
+{
+    lock_counter=0 # counts in 1/100s
+    waiting_for_lock_msg_send="false"
+    while ! mkdir "${XP_SERVERS}.lock" 2>/dev/null ; do
+        # print notice after 2 seconds
+        if [ ${lock_counter} -gt 200 -a "${waiting_for_lock_msg_send}" != "true" ] ; then
+            echo "${0}: waiting for lock(=${XP_SERVERS}.lock)..."
+            waiting_for_lock_msg_send="true"
+        fi
+
+        # tread the lock as "broken" after 20 seconds
+        if [ ${lock_counter} -gt 2000 ] ; then
+            echo "${0}: WARNING: lock timeout for lock(=${XP_SERVERS}.lock)."
+            return 0
+        fi
+                
+        if [ -x /bin/usleep ] ; then
+            /bin/usleep 200000
+            lock_counter=$((${lock_counter} + 20)) # 20/100s
+        else
+            sleep 1
+            lock_counter=$((${lock_counter} + 100)) # 100/100s
+        fi
+    done
+}
+
+unlock_server_registry()
+{
+    rmdir "${XP_SERVERS}.lock"
+}
+
+XCOMM Kill dead registry locks (silently!)
+kill_dead_registry_locks()
+{
+    rm -Rf "${XP_SERVERS}.lock"
+}
+
+XCOMM Start Xprint servers
+start_servers()
+{
+    # Write registry "intro" ...
+    lock_server_registry
+    echo "# Xprint server list"                               >>"${XP_SERVERS}"
+    echo "# File is for private use for ${0}."                >>"${XP_SERVERS}"
+    echo "# Do not edit, rely on the content or file format." >>"${XP_SERVERS}"
+    unlock_server_registry
+
+    hostname="$(hostname)"
+
+    default_fontpath="$(get_system_fontlist | fontlist2fontpath)"
+    default_fontpath_acceptpattern=".*";
+    default_fontpath_rejectpattern="_No_Match_"; # Match nothing   
+    
+    curr=0
+    while [ $curr -lt $num_xpstart ] ; do
+        if [ "${xpstart_remote_server[$curr]}" != "" ] ; then
+            # Remote Xprt, just put the entry into the registry
+            lock_server_registry
+            echo "display=${xpstart_remote_server[$curr]}" >>"${XP_SERVERS}"
+            unlock_server_registry
+        else
+            # Run block in seperate process to avoid that changes to the
+            # xpstart_* variables affect the next cycle
+            (
+              # Use defaults if there are no special options
+              [ "${xpstart_fontpath[$curr]}"               = "" ] &&               xpstart_fontpath[$curr]="${default_fontpath}";
+              [ "${xpstart_fontpath_acceptpattern[$curr]}" = "" ] && xpstart_fontpath_acceptpattern[$curr]="$default_fontpath_acceptpattern";
+              [ "${xpstart_fontpath_rejectpattern[$curr]}" = "" ] && xpstart_fontpath_rejectpattern[$curr]="$default_fontpath_rejectpattern";
+              [ "${xpstart_displayid[$curr]}"              = "" ] &&              xpstart_displayid[$curr]="$(FindFreeXDisplayNum)"       
+              [ "${xpstart_logger[$curr]}"                 = "" ] &&                 xpstart_logger[$curr]="logger -p lpr.notice -t Xprt_${xpstart_displayid[$curr]}";
+              [ "${xpstart_logfile[$curr]}"                = "" ] &&                xpstart_logfile[$curr]="/dev/null";
+              [ "${xpstart_xprt_binary[$curr]}"            = "" ] &&            xpstart_xprt_binary[$curr]="${XPRT_BIN}";
+              if [ "${xpstart_xprt_binary[$curr]}" = "/usr/openwin/bin/Xprt" -o "$(uname -s)" = "SunOS" ] ; then
+                  # Solaris /usr/openwin/bin/Xprt does not support "-nolisten tcp"
+                  # yet nor is it possible to run a Xserver on a unix socket only
+                  # in Solaris since access to the unix domain sockets in
+                  # /tmp/.X11-pipe and /tmp/.X11-unix is restricted to applications
+                  # with group-id "root" (e.g. the Xprt server would need to be
+                  # setgid "root" that plain users can start it listening on a unix
+                  # socket only)
+                  [ "${xpstart_options[$curr]}" = "" ] && xpstart_options[$curr]="-ac -pn"
+              else
+                  [ "${xpstart_options[$curr]}" = "" ] && xpstart_options[$curr]="-ac -pn -nolisten tcp"
+              fi
+
+              # Check if the Xprt binary is available                                     
+              if [ ! -x "${xpstart_xprt_binary[$curr]}" ] ; then                                            
+                  error_echo "Can't find \"${xpstart_xprt_binary[$curr]}\"."                                  
+                  exit 1 # exit block                                                               
+              fi                                                                          
+
+              # Verify and set location of font encodings directory file
+              if [ "${xpstart_font_encodings_dir[$curr]}" = "" ] ; then
+                  if [ -f "${XPROJECTROOT}/lib/X11/fonts/xf86encodings/encodings.dir" ] ; then
+                      xpstart_font_encodings_dir[$curr]="${XPROJECTROOT}/lib/X11/fonts/xf86encodings/encodings.dir"
+                  else
+                      xpstart_font_encodings_dir[$curr]="${XPROJECTROOT}/lib/X11/fonts/encodings/encodings.dir";
+                  fi
+              fi
+
+              unset FONT_ENCODINGS_DIRECTORY
+              if [ ! -f "${xpstart_font_encodings_dir[$curr]}" ] ; then
+                  warning_echo "Can't find \"${xpstart_font_encodings_dir[$curr]}\", TrueType font support may not work."
+              fi
+
+              export FONT_ENCODINGS_DIRECTORY="${xpstart_font_encodings_dir[$curr]}"
+
+              # Generate font path (containing only valid font path elements)
+              # from input font path and filter expressions
+              curr_fp=$(echo "${xpstart_fontpath[$curr]}" | 
+                        fontpath2fontlist |
+                        filter_fontlist "${xpstart_fontpath_acceptpattern[$curr]}" "${xpstart_fontpath_rejectpattern[$curr]}" | 
+                        filter_unsupported_fonts |
+                        sort_scaleable_fonts_first | 
+                        validate_fontlist | 
+                        fontlist2fontpath)
+
+              # Set Xserver auditing level option
+              unset curr_audit
+              if [ "${xpstart_auditlevel[$curr]}" != "" ] ; then
+                  curr_audit="-audit ${xpstart_auditlevel[$curr]}"
+              fi
+
+              # Set Xprt -XpFile option
+              unset curr_xpfile
+              if [ "${xpstart_xpfile[$curr]}" != "" ] ; then
+                  curr_xpfile="-XpFile ${xpstart_xpfile[$curr]}"
+              fi
+
+              # Set custom XPCONFIGDIR (if there is one)
+              unset XPCONFIGDIR
+              if [ "${xpstart_xpconfigdir[$curr]}" != "" ] ; then
+                  export XPCONFIGDIR="${xpstart_xpconfigdir[$curr]}"
+              fi
+
+              # If someone uses "-nolisten tcp" make sure we do not add a hostname to force local transport
+              if [ "$(echo "${xpstart_options[$curr]}" | egrep "nolisten.*tcp")" != "" ] ; then
+                  xp_display=":${xpstart_displayid[$curr]}"
+              else
+                  xp_display="${hostname}:${xpstart_displayid[$curr]}"
+              fi
+              
+              (
+                (
+                  "${xpstart_xprt_binary[$curr]}" \
+                      ${xpstart_options[$curr]} \
+                      ${curr_xpfile} ${curr_audit} \
+                      -fp ${curr_fp} \
+                      :${xpstart_displayid[$curr]} &
+                  server_pid="$!"
+ 
+                  # Append the new server to the registry
+                  lock_server_registry
+                  echo "display=${xp_display} display_id=${xpstart_displayid[$curr]} pid=${server_pid}" >>"${XP_SERVERS}"
+                  unlock_server_registry
+                  
+                  wait
+                  echo "Xprint server pid=${server_pid} done, exitcode=$?."
+                  
+                  # Remove the dead server from the registry
+                  # (only if the registry still exists - if /etc/init.d/xprint stop" gets called the registry
+                  # will be removed - and we should not re-create it afterwards...)
+                  lock_server_registry
+                  if [ -f "${XP_SERVERS}" ] ; then
+                      x="$(cat "${XP_SERVERS}")" # Store content of file "${XP_SERVERS}" in var "x"
+                      echo "${x}" | fgrep -v "display_id=${xpstart_displayid[$curr]} pid=${server_pid}" >"${XP_SERVERS}"
+                  fi
+                  unlock_server_registry                 
+                ) 2>&1 | while read i ; do echo "$i" | tee -a "${xpstart_logfile[$curr]}" | ${xpstart_logger[$curr]} ; done
+              ) &
+            )
+        fi
+        
+        curr=$(($curr + 1))
+    done
+    
+    # Remove tmp. file created by |FindFreeXDisplayNum()|
+    rm -f "${lastdisplaynumreturned_store}"
+
+    # Done.
+    lock_server_registry
+    echo "# EOF." >>"${XP_SERVERS}"
+    unlock_server_registry
+    return 0
+}
+
+
+XCOMM Convenience function to check setup and start Xprt server(s)
+do_start()
+{
+    if [ -f "${XP_SERVERS}" ] ; then
+        numservers="$(do_get_xpserverlist | wc -l)"
+        if [ ${numservers} -gt 0 ] ; then
+            verbose_echo "Xprint servers are already running."
+            return 0
+        else
+            verbose_echo "Old server registry found, cleaning-up..."
+            do_stop
+        fi
+    fi
+    
+    # Check if we can write the registry file
+    touch "${XP_SERVERS}" 2>/dev/null
+    if [ ! -f "${XP_SERVERS}" ] ; then
+        error_echo "Cannot create \"${XP_SERVERS}\"."
+        # exit code 4 = user had insufficient privilege (LSB)
+        exit 4
+    fi
+
+    if ! setup_config ; then
+        error_echo "setup_config failed."
+        exit 1
+    fi
+
+    # Provide two paths here - one which simply starts the Xprt servers,
+    # assuming that there is a print spooler already running (or that 
+    # ${XPCONFIG}/C/print/Xprinters provides static print queue entries
+    # (like for the PSspooldir print model)) and a 2nd path which
+    # explicitly checks if the print queue daemons are running
+    if true ; then
+        msg "Starting Xprint servers: Xprt."
+        start_servers
+    else 
+        # Continue in the background if there is no spooler running yet (that
+        # we don't hold off the boot process nor run in a possible race-condition
+        # when /etc/init.d/lpd was not called yet but the runlevel script waits
+        # for us to finish first ...
+        if is_spooler_running ; then
+            msg "Starting Xprint servers: Xprt."
+            start_servers
+        else
+            msg "Starting Xprint servers (in the background): Xprt."
+            (wait_for_print_spooler ; start_servers) &
+            sleep 5
+        fi
+    fi
+    
+    if [ "${CURRLOGNAME}" = "root" -a -d /var/lock/subsys/ ] ; then
+        touch /var/lock/subsys/xprint
+    fi
+}
+
+XCOMM Convenience function to stop Xprt server(s)
+do_stop()
+{
+    msg "Stopping Xprint servers: Xprt."
+
+    lock_server_registry
+    if [ -f "${XP_SERVERS}" ] ; then       
+        reglist="$(cat "${XP_SERVERS}")"
+        rm -f "${XP_SERVERS}"
+    fi
+    unlock_server_registry
+    
+    if [ "${reglist}" != "" ] ; then
+        echo "${reglist}" |
+          grep "^display=.*:.* pid=[0-9]*$" |
+          while read i ; do
+              (
+                eval ${i}
+                if pexists ${pid} ; then 
+                    kill ${pid}
+                fi
+
+                # Remove the X sockets/pipes which are not in use anymore
+                # (It would be better if the Xservers would cleanup this
+                # automatically, but most Xservers do not do that... ;-(
+                # Note that this will not work on Solaris where applications
+                # must run with groupid="root" if they want to write into
+                # /tmp/.X11-unix/ and/or /tmp/.X11-pipe/)
+                if [ "${display_id}" != "" ] ; then
+                    rm -f "/tmp/.X${display_id}-lock"     2>/dev/null
+                    rm -f "/tmp/.X11-unix/X${display_id}" 2>/dev/null
+                    rm -f "/tmp/.X11-pipe/X${display_id}" 2>/dev/null
+                fi 
+              )
+          done
+    fi
+
+    if [ "${CURRLOGNAME}" = "root" -a -d /var/lock/subsys/ ] ; then
+        rm -f /var/lock/subsys/xprint
+    fi
+    
+    # Remove any outstanding (dead) locks and cleanup
+    rm -f "${XP_SERVERS}"
+    kill_dead_registry_locks
+}
+
+XCOMM Convenience function to obtain a list of available Xprint servers
+do_get_xpserverlist()
+{
+    if [ -f "${XP_PER_USER_SERVERS}" -o -f "${XP_GLOBAL_SERVERS}" ] ; then
+        xpserverlist=$(
+          # Enumerate both per-user and global servers (in that order)
+          (
+            [ -f "${XP_PER_USER_SERVERS}" ]  && cat "${XP_PER_USER_SERVERS}"
+            [ -f "${XP_GLOBAL_SERVERS}"   ]  && cat "${XP_GLOBAL_SERVERS}"
+          ) |
+            egrep "^display=.*:.* pid=[0-9]*$|^display=.*:[0-9]*$" |
+              while read i ; do
+                  (
+                    pid="none"
+                    eval ${i}
+                    # Check if the Xprt process exists (if possible)
+                    if [ "$pid" != "none" ] ; then
+                        if pexists ${pid} ; then
+                            echo ${display}
+                        fi
+                    else
+                        echo ${display}
+                    fi
+                  )
+              done | tr "\n" " "
+          )
+        # Only produce output if we have some entries...
+        [ "${xpserverlist}" != "" ] && echo "${xpserverlist}"
+    fi
+}
+
+do_restart()
+{
+    msg "Restarting Xprint server(s): Xprt."
+    do_stop
+    sleep 1
+    do_start
+}
+
+do_diag()
+{
+    echo "##### Diag start $(date)."
+    
+    # General info
+    echo "## General info start."
+    (
+      echo "PATH=\"${PATH}\""
+      echo "TZ=\"${TZ}\""
+      echo "LANG=\"${LANG}\""
+      echo "uname -a=\"$(uname -a)\""
+      echo "uname -s=\"$(uname -s)\""
+      echo "uname -p=\"$(uname -p)\""
+      echo "uname -i=\"$(uname -i)\""
+      echo "uname -m=\"$(uname -m)\""
+      echo "has /etc/SuSE-release ... $([ -f "/etc/SuSE-release" ] && echo "yes" || echo "no")"
+      echo "has /etc/redhat-release ... $([ -f "/etc/redhat-release" ] && echo "yes" || echo "no")"
+      echo "has /etc/debian_version ... $([ -f "/etc/debian_version" ] && echo "yes" || echo "no")"
+      echo "how many Xprt servers are running ...$(ps -ef | fgrep Xprt | fgrep -v "grep" | wc -l)"
+    ) 2>&1 | while read i ; do echo "  $i" ; done
+    echo "## General info end."
+    
+    # Testing font paths
+    echo "## Testing font paths start."
+    (
+      get_system_fontlist |
+          filter_unsupported_fonts |
+          sort_scaleable_fonts_first | 
+          validate_fontlist | while read d ; do
+          echo "#### Testing \"${d}\" ..."
+          if [ ! -d "$d" ] ; then
+              echo "# Error: $d does not exists."
+              continue
+          fi
+          if [ ! -r "$d" ] ; then
+              echo "# Error: $d not readable."
+              continue
+          fi
+          if [ ! -f "${d}/fonts.dir" ] ; then
+              echo "# Error: ${d}/fonts.dir not found."
+              continue
+          else
+              if [ ! -r "${d}/fonts.dir" ] ; then
+                  echo "# Error: ${d}/fonts.dir not readable."
+                  continue
+              fi
+          fi
+          if [ -f "${d}/fonts.alias" ] ; then
+              if [ ! -r "${d}/fonts.alias" ] ; then
+                  echo "# Error: ${d}/fonts.alias not readable."
+              fi
+          fi
+
+          if [ "$(cat "${d}/fonts.dir" | fgrep 'cursor')" != "" ] ; then
+              echo "${d}/fonts.dir has cursor font."
+          fi
+          if [ "$(cat "${d}/fonts.dir" | fgrep 'fixed')" != "" ] ; then
+              echo "${d}/fonts.dir has fixed font."
+          fi
+
+          if [ -r "${d}/fonts.alias" ] ; then 
+              if [ "$(cat "${d}/fonts.alias" | fgrep 'cursor')" != "" ] ; then
+                  echo "${d}/fonts.alias has cursor font."
+              fi
+              if [ "$(cat "${d}/fonts.alias" | fgrep 'fixed')" != "" ] ; then
+                  echo "${d}/fonts.alias has fixed font."
+              fi
+          fi
+
+          linenum=0
+          cat "${d}/fonts.dir" | while read i1 i2 i3 i4 ; do
+              linenum=$((${linenum} + 1))
+              [ ${linenum} -eq 1 ] && continue
+
+              if [ ! -f "${d}/${i1}" ] ; then
+                  echo "ERROR: ${d}/fonts.dir line ${linenum} has non-exististant font \"${i1}\" (=\"${i1} ${i2} ${i3} ${i4}\")"
+              fi
+          done
+      done
+    ) 2>&1 | while read i ; do echo "  $i" ; done
+    echo "## Testing font paths end."
+    
+    echo "##### Diag End $(date)."
+}
+
+XCOMM Set platform-defaults for setup_config()
+setup_config_defaults()
+{
+    curr_num_xpstart="${1}"
+    
+    #### Defaults for Linux/Solaris
+    # Start Xprt using builtin XPCONFIGDIR at a free display numer
+    # (Solaris(=SunOS5.x)'s /usr/openwin/bin/Xprt supports TrueType fonts,
+    # therefore we don't need to filter them)
+                      xpstart_fontpath[${curr_num_xpstart}]="";
+        xpstart_fontpath_acceptpattern[${curr_num_xpstart}]=".*";
+        xpstart_fontpath_rejectpattern[${curr_num_xpstart}]="/Speedo|/F3bitmaps|/F3";
+                     xpstart_displayid[${curr_num_xpstart}]="";
+                   xpstart_xpconfigdir[${curr_num_xpstart}]="";
+                        xpstart_xpfile[${curr_num_xpstart}]="";
+                    xpstart_auditlevel[${curr_num_xpstart}]="4";
+                       xpstart_options[${curr_num_xpstart}]="";
+                        xpstart_logger[${curr_num_xpstart}]="";
+    # Check whether we have /dev/stderr (needed for old AIX + old Debian)
+    if [ -w "/dev/stderr" ] ; then
+                       xpstart_logfile[${curr_num_xpstart}]="/dev/stderr";
+    else
+                       xpstart_logfile[${curr_num_xpstart}]="/dev/tty";
+    fi
+                   xpstart_xprt_binary[${curr_num_xpstart}]="";
+
+    # Custom rules for the GISWxprintglue package on Solaris
+    # (which uses Solaris's /usr/openwin/bin/Xprt but a custom config)
+    if [ "${XPCUSTOMGLUE}" = "GISWxprintglue" ] ; then
+        xpstart_xpconfigdir[${curr_num_xpstart}]="/opt/GISWxprintglue/server/etc/XpConfig"
+        xpstart_xprt_binary[${curr_num_xpstart}]="/usr/openwin/bin/Xprt"
+    fi
+    # Custom rules for the GISWxprint package on Solaris
+    # (which uses both it's own Xprt and a custom config)
+    if [ "${XPCUSTOMGLUE}" = "GISWxprint" ] ; then
+        xpstart_xpconfigdir[${curr_num_xpstart}]="/opt/GISWxprint/server/etc/XpConfig"
+        xpstart_xprt_binary[${curr_num_xpstart}]="/opt/GISWxprint/bin/Xprt"
+        xpstart_font_encodings_dir[${curr_num_xpstart}]="/opt/GISWxprint/lib/X11/fonts/encodings/encodings.dir"
+    fi
+    
+    #######################################################
+    ###
+    ### Debian Xprint package default configuration
+    ###
+    if [ "${XPCUSTOMGLUE}" = "DebianGlue" ] ; then
+        # Set XPCONFIGDIR=/usr/share/Xprint/xserver
+        xpstart_xpconfigdir[${curr_num_xpstart}]="/usr/share/Xprint/xserver";
+
+        # Use fixed display ID (":64"), or else all client programs will have to be
+        # restarted simply to update XPSERVERLIST to the latest ID when upgrading,
+        # which would be a nightmare.
+        xpstart_displayid[${curr_num_xpstart}]=64;
+
+        # Do not send any messages to console
+        xpstart_logfile[${curr_num_xpstart}]="/dev/null";
+
+        # By default use binary provided by Debian's "xprt-xprintorg" package
+        # (=/usr/bin/Xprt), otherwise leave blank (e.g. use script's default
+        # (=/usr/X11R6/bin/Xprt))
+        if [ -x "/usr/bin/Xprt" ] ; then
+            xpstart_xprt_binary[${curr_num_xpstart}]="/usr/bin/Xprt";
+        fi
+    fi
+    ###
+    ### End Debian default configuration
+    ###
+    #######################################################
+}
+
+fetch_etc_initd_xprint_envvars()
+{
+    curr_num_xpstart="${1}"
+
+    ## Process some $ETC_INITD_XPRINT_* vars after all which may be used by
+    # a user to override the hardcoded values here when starting Xprt per-user
+    # (a more flexible way is to provide an own setup config script in
+    # "~./Xprint_per_user_startup" - see above)
+    if [ "${ETC_INITD_XPRINT_XPRT_PATH}" != "" ] ; then
+        xpstart_xprt_binary[${curr_num_xpstart}]="${ETC_INITD_XPRINT_XPRT_PATH}"
+    fi
+    if [ "${ETC_INITD_XPRINT_XPCONFIGDIR}" != "" ] ; then
+        xpstart_xpconfigdir[${curr_num_xpstart}]="${ETC_INITD_XPRINT_XPCONFIGDIR}"
+    fi
+    if [ "${ETC_INITD_XPRINT_XPFILE}" != "" ] ; then
+        xpstart_xpfile[${curr_num_xpstart}]="${ETC_INITD_XPRINT_XPFILE}"
+    fi
+    if [ "${ETC_INITD_XPRINT_LOGFILE}" != "" ] ; then
+        xpstart_logfile[${curr_num_xpstart}]="${ETC_INITD_XPRINT_LOGFILE}"
+    fi
+    if [ "${ETC_INITD_XPRINT_DISPLAYID}" != "" ] ; then
+        xpstart_displayid[${curr_num_xpstart}]="${ETC_INITD_XPRINT_DISPLAYID}"
+    fi
+    if [ "${ETC_INITD_XPRINT_FONTPATH}" != "" ] ; then
+        xpstart_fontpath[${curr_num_xpstart}]="${ETC_INITD_XPRINT_FONTPATH}"
+    fi
+    if [ "${ETC_INITD_XPRINT_XPRT_OPTIONS}" != "" ] ; then
+        xpstart_options[${curr_num_xpstart}]="${ETC_INITD_XPRINT_XPRT_OPTIONS}"
+    fi
+    if [ "${ETC_INITD_XPRINT_AUDITLEVEL}" != "" ] ; then
+        xpstart_auditlevel[${curr_num_xpstart}]="${ETC_INITD_XPRINT_AUDITLEVEL}"
+    fi
+    if [ "${ETC_INITD_XPRINT_XF86ENCODINGSDIR}" != "" ] ; then
+        xpstart_font_encodings_dir[${curr_num_xpstart}]="${ETC_INITD_XPRINT_XF86ENCODINGSDIR}"
+    fi
+}
+
+XCOMM###########################################################################
+XCOMM setup_config() sets the configuration parameters used to start one
+XCOMM or more Xprint servers ("Xprt").
+XCOMM The following variables are used:
+XCOMM - "num_xpstart" - number of servers to start
+XCOMM - "xpstart_fontpath[index]" - custom font path. Leave blank if you want
+XCOMM   the platform-specific default
+XCOMM - "xpstart_fontpath_acceptpattern[index]" - extended regular expression
+XCOMM   (see egrep(1)) used to filter the font path - items only pass this
+XCOMM   filter if they match the pattern (leave blank if you want to filter
+XCOMM   nothing)
+XCOMM - "xpstart_fontpath_rejectpattern[index]" - extended regular expression
+XCOMM   (see egrep(1)) used to filter the font path - items only pass this
+XCOMM   filter if they do not match the pattern (leave blank if you want to
+XCOMM   filter nothing)
+XCOMM - "xpstart_font_encodings_dir[index]" - location of "encodings.dir".
+XCOMM   Leave blank to use the default.
+XCOMM - "xpstart_displayid[index]" - display id to use for the Xprint server
+XCOMM   (leave blank to choose the next available free display id)
+XCOMM - "xpstart_xpconfigdir[index]" - value for custom XPCONFIGDIR (leave blank
+XCOMM   if you don not want that that XPCONFIGDIR is set at Xprt startup)
+XCOMM - "xpstart_xpfile[index]" - value used for Xprt's "-XpFile" option (leave
+XCOMM   blank if you do not want to set this option)
+XCOMM - "xpstart_auditlevel[index]" - set Xserver auditing level (leave blank to
+XCOMM   use no auditing)
+XCOMM - "xpstart_options[index]" - set further Xprt options (leave blank to set
+XCOMM   no further options)
+XCOMM - "xpstart_logger[index]" - utility which gets stderr/stdout messages from
+XCOMM   Xprt and sends them to a logging daemon. Leave blank to use /usr/bin/logger
+XCOMM   to send such messages to the lpr.notice syslog)
+XCOMM - "xpstart_logfile[index]" - log file to append stderr/stdout messages from
+XCOMM   Xprt to. Leave blank to send messages to /dev/null
+XCOMM - "xpstart_xprt_binary[index]" - set custom Xprt binary (leave blank to use
+XCOMM   the platform-specifc default)
+setup_config()
+{
+    num_xpstart=0;
+    
+    if [ "${ETC_INITD_XPRINT_CUSTOM_SETUP_CONFIG}" != "" ] ; then
+        user_cfg="${ETC_INITD_XPRINT_CUSTOM_SETUP_CONFIG}"
+    else
+        user_cfg="${HOME}/.Xprint_per_user_startup"
+    fi
+    
+    # Source per-user ~/.Xprint_per_user_startup file if there is one
+    # (and do not use the script's defaults below)
+    if [ -r "${user_cfg}" ] ; then
+        # Define API version which should be checked by ${HOME}/.Xprint_per_user_startup
+        # ${HOME}/.Xprint_per_user_startup should bail-out if the version differ
+        etc_initd_xprint_api_version=2
+        
+        # Source per-user settings script
+        . "${user_cfg}"
+        
+        # done with setting the config for per-user Xprt instances
+        return 0;
+    else
+        # Use /etc/init.d/xprint's builtin config
+        # Each entry should start with |setup_config_defaults| to pull the
+        # platform defaults and finish with |num_xpstart=$(($num_xpstart + 1))|
+        # to end the entry
+        
+        # Set platform-defaults
+        setup_config_defaults "${num_xpstart}"
+
+        ## -- snip --
+
+        # Admins can put their stuff "in" here...
+
+        ## -- snip --
+
+        # Override script's builtin values with those a user may set via the
+        # $ETC_INIITD_XPRINT_* env vars
+        fetch_etc_initd_xprint_envvars "${num_xpstart}"
+
+        num_xpstart=$((${num_xpstart} + 1))
+
+        return 0;
+    fi
+
+    #### Sample 1:
+    # # Start Xprt on a free display ID with custom XPCONFIGDIR and without
+    # # Speedo and TrueType fonts
+    #    xpstart_fontpath_rejectpattern[$num_xpstart]="/Speedo|/TrueType|/TT(/$|$)|/TTF(/$|$)";
+    #               xpstart_xpconfigdir[$num_xpstart]="/home/gisburn/cwork/Xprint/Xprt_config/XpConfig";
+    #                xpstart_auditlevel[$num_xpstart]="4";
+    #                   xpstart_options[$num_xpstart]="-ac -pn";
+    #num_xpstart=$(($num_xpstart + 1))
+
+
+    #### Sample 2: 
+    # # Start Xprt without TrueType fonts on a display 55 with custom
+    # # XPCONFIGDIR
+    #    xpstart_fontpath_rejectpattern[$num_xpstart]="/TrueType|/TT(/$|$)|/TTF(/$|$)";
+    #                 xpstart_displayid[$num_xpstart]=55;
+    #               xpstart_xpconfigdir[$num_xpstart]="/home/gisburn/cwork/Xprint/Xprt_config/XpConfig";
+    #                xpstart_auditlevel[$num_xpstart]=4;
+    #                   xpstart_options[$num_xpstart]="-ac -pn";
+    #num_xpstart=$(($num_xpstart + 1))
+
+    #### Sample 3: 
+    # # Start Xprt without TrueType fonts on a display 56 with custom
+    # # XPCONFIGDIR and alternate "Xprinters" file
+    #    xpstart_fontpath_rejectpattern[$num_xpstart]="/TrueType|/TT(/$|$)|/TTF(/$|$)";
+    #                 xpstart_displayid[$num_xpstart]=56;
+    #               xpstart_xpconfigdir[$num_xpstart]="/etc/XpConfig/default";
+    #                    xpstart_xpfile[$num_xpstart]="/etc/XpConfig/default/Xprinters_test2"
+    #                xpstart_auditlevel[$num_xpstart]="4";
+    #                   xpstart_options[$num_xpstart]="-ac -pn";
+    #               xpstart_xprt_binary[$num_xpstart]="";
+    #num_xpstart=$(($num_xpstart + 1))
+
+    #### Sample 4:
+    # # Start Xprt with Solaris ISO-8859-7 (greek(="el") locale) fonts on
+    # # display 57
+    #                  xpstart_fontpath[$num_xpstart]="/usr/openwin/lib/locale/iso_8859_7/X11/fonts/75dpi,/usr/openwin/lib/locale/iso_8859_7/X11/fonts/Type1,/usr/openwin/lib/X11/fonts/misc/";
+    #    xpstart_fontpath_acceptpattern[$num_xpstart]="";
+    #    xpstart_fontpath_rejectpattern[$num_xpstart]="_No_Match_";
+    #                 xpstart_displayid[$num_xpstart]="57";
+    #                xpstart_auditlevel[$num_xpstart]="4";
+    #                   xpstart_options[$num_xpstart]="-ac -pn";
+    #num_xpstart=$(($num_xpstart + 1))
+
+    #### Sample 5:
+    # # Start Xprt with the font list of an existing Xserver (excluding Speedo fonts) on
+    # # display 58
+    # # Note that this only works within a X session. At system boot time
+    # # there will be no $DISPLAY to fetch the information from!!
+    #                  xpstart_fontpath[$num_xpstart]="$(get_fontlist_from_display ${DISPLAY} | fontlist2fontpath)";
+    #    xpstart_fontpath_acceptpattern[$num_xpstart]="";
+    #    xpstart_fontpath_rejectpattern[$num_xpstart]="";
+    #                 xpstart_displayid[$num_xpstart]="58";
+    #               xpstart_xpconfigdir[$num_xpstart]="";
+    #                xpstart_auditlevel[$num_xpstart]="4";
+    #                   xpstart_options[$num_xpstart]="-ac -pn";
+    #               xpstart_xprt_binary[$num_xpstart]="";
+    #num_xpstart=$(($num_xpstart + 1))
+
+    #### Sample 6:
+    # # List remote Xprt's here 
+    # # (note that there is no test to check whether these DISPLAYs are valid!)
+    #             xpstart_remote_server[$num_xpstart]="sera:12"    ; num_xpstart=$(($num_xpstart + 1))
+    #             xpstart_remote_server[$num_xpstart]="gandalf:19" ; num_xpstart=$(($num_xpstart + 1))   
+}
+
+XCOMM###########################################################################
+
+XCOMM Main
+case "$1" in
+    ## Start Xprint servers
+    'start')
+        do_start
+        ;;
+
+    ## Stop Xprint servers
+    # Note that this does _not_ kill Xprt instances started using this script 
+    # by non-root users
+    'stop')
+        do_stop
+        ;;
+
+    ## Restart Xprint servers
+    'restart'|'force-reload')
+        do_restart
+        ;;
+
+    ## Reload configuration without stopping and restarting
+    'reload')
+        # not supported
+        msg "reload not supported, use 'restart' or 'force-reload'"
+        exit 3
+        ;;
+
+    ## Restart Xprint only if it is already running
+    'condrestart'|'try-restart')
+        # only restart if it is already running
+        [ -f /var/lock/subsys/xprint ] && do_restart || :
+        ;;
+    
+    ## Get list of all Xprint servers for this user
+    # (incl. per-user and system-wide instances)    
+    'get_xpserverlist')
+        do_get_xpserverlist
+        ;;
+
+    ## Get status of Xprint servers, RedHat-style
+    'status')
+        x="$(do_get_xpserverlist)"
+        if [ "${x}" != "" ] ; then
+            msg "Xprint (${x}) is running..."
+            exit 0
+        else
+            msg "Xprint is stopped"
+            exit 3
+        fi 
+        ;;
+        
+    ## Wrapper
+    'wrapper')
+        cmd="${2}"
+        [ "${cmd}" = "" ] && fatal_error "No command given."
+        shift ; shift
+        export XPSERVERLIST="$(do_get_xpserverlist)"
+        [ "${XPSERVERLIST}" = "" ] && fatal_error "No Xprint servers found."
+        exec "${cmd}" "$@"
+        ;;
+
+    ## Wrapper for "xplsprinters"
+    'lsprinters')
+        [                  "${ETC_INITD_XPRINT_XPLSPRINTERS_PATH}" != "" ] && cmd="${ETC_INITD_XPRINT_XPLSPRINTERS_PATH}"
+        [ "${cmd}" = "" -a "${XPCUSTOMGLUE}" = "GISWxprintglue"          ] && cmd="/opt/GISWxprintglue/bin/xplsprinters"
+        [ "${cmd}" = "" -a "${XPCUSTOMGLUE}" = "GISWxprint"              ] && cmd="/opt/GISWxprint/bin/xplsprinters"
+        [ "${cmd}" = "" -a "${XPROJECTROOT}" != ""                       ] && cmd="${XPROJECTROOT}/bin/xplsprinters"
+        [ "${cmd}" = ""                                                  ] && cmd="xplsprinters"
+
+        shift
+        export XPSERVERLIST="$(do_get_xpserverlist)"
+        [ "${XPSERVERLIST}" = "" ] && fatal_error "No Xprint servers found."
+        exec "${cmd}" "$@"
+        ;;
+
+    ## Diagnostics
+    'diag')
+        do_diag
+        ;;
+    
+    ## Print usage
+    *)
+        msg "Usage: $0 { start | stop | restart | reload | force-reload | status | condrestart | try-restart | wrapper | lsprinters | get_xpserverlist | diag }"
+        exit 2
+esac
+exit 0
+
+XCOMM EOF.
diff --git a/nx-X11/programs/Xserver/Xprint/etc/profile.d/Imakefile b/nx-X11/programs/Xserver/Xprint/etc/profile.d/Imakefile
new file mode 100644
index 000000000..a70824c8d
--- /dev/null
+++ b/nx-X11/programs/Xserver/Xprint/etc/profile.d/Imakefile
@@ -0,0 +1,14 @@
+XCOMM $Xorg: Imakefile,v 1.1 2002/10/31 14:42:52 gisburn Exp $
+
+#if NothingOutsideProjectRoot
+#define EtcDir ProjectRoot/etc
+#else
+#define EtcDir /etc
+#endif
+
+ETCDIR = EtcDir
+
+all::
+
+InstallNamedProg(xprint.csh,xprint.csh,$(ETCDIR)/profile.d)
+InstallNamedProg(xprint.sh,xprint.sh,$(ETCDIR)/profile.d)
diff --git a/nx-X11/programs/Xserver/Xprint/etc/profile.d/xprint.csh b/nx-X11/programs/Xserver/Xprint/etc/profile.d/xprint.csh
new file mode 100644
index 000000000..7cc675840
--- /dev/null
+++ b/nx-X11/programs/Xserver/Xprint/etc/profile.d/xprint.csh
@@ -0,0 +1,16 @@
+#
+# /etc/profile.d/xprint.csh
+#
+# Copyright (c) 2002-2004 by Roland Mainz <roland.mainz@nrubsig.org>
+# please send bugfixes or comments to http://xprint.mozdev.org/
+
+
+#
+# Obtain list of Xprint servers
+#
+
+if ( -f /etc/init.d/xprint ) then
+  setenv XPSERVERLIST "`/bin/sh /etc/init.d/xprint get_xpserverlist`"
+endif
+
+# /etc/profile.d/xprint.csh ends here.
diff --git a/nx-X11/programs/Xserver/Xprint/etc/profile.d/xprint.sh b/nx-X11/programs/Xserver/Xprint/etc/profile.d/xprint.sh
new file mode 100644
index 000000000..b5b46c1e7
--- /dev/null
+++ b/nx-X11/programs/Xserver/Xprint/etc/profile.d/xprint.sh
@@ -0,0 +1,16 @@
+#
+# /etc/profile.d/xprint.sh
+#
+# Copyright (c) 2002-2004 by Roland Mainz <roland.mainz@nrubsig.org>
+# please send bugfixes or comments to http://xprint.mozdev.org/
+
+#
+# Obtain list of Xprint servers
+#
+
+if [ -f "/etc/init.d/xprint" ] ; then
+  XPSERVERLIST="`/bin/sh /etc/init.d/xprint get_xpserverlist`"
+  export XPSERVERLIST
+fi
+
+# /etc/profile.d/xprint.sh ends here.