massive reduction of unneeded files

1 files changed, 0 insertions, 194 deletions

diff --git a/nx-X11/programs/Xserver/hw/dmx/dmxsync.c b/nx-X11/programs/Xserver/hw/dmx/dmxsync.c
deleted file mode 100644
index 02e244697..000000000
--- a/nx-X11/programs/Xserver/hw/dmx/dmxsync.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/* $XFree86$ */
-/*
- * Copyright 2002-2004 Red Hat Inc., Durham, North Carolina.
- *
- * All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining
- * a copy of this software and associated documentation files (the
- * "Software"), to deal in the Software without restriction, including
- * without limitation on the rights to use, copy, modify, merge,
- * publish, distribute, sublicense, and/or sell copies of the Software,
- * and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the
- * next paragraph) shall be included in all copies or substantial
- * portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NON-INFRINGEMENT.  IN NO EVENT SHALL RED HAT AND/OR THEIR SUPPLIERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * Authors:
- *   Rickard E. (Rik) Faith <faith@redhat.com>
- *
- */
-
-/** \file
- *
- * The DMX server code is written to call #dmxSync() whenever an XSync()
- * might be necessary.  However, since XSync() requires a two way
- * communication with the other X server, eliminating unnecessary
- * XSync() calls is a key performance optimization.  Support for this
- * optimization is provided here.  Statistics about XSync() calls and
- * latency are gathered in #dmxstat.c.
- *
- * During the initial conversion from calling XSync() immediately to the
- * XSync() batching method implemented in this file, it was noted that,
- * out of more than 300 \a x11perf tests, 8 tests became more than 100
- * times faster, with 68 more than 50X faster, 114 more than 10X faster,
- * and 181 more than 2X faster. */
-
-#ifdef HAVE_DMX_CONFIG_H
-#include <dmx-config.h>
-#endif
-
-#include "dmx.h"
-#include "dmxsync.h"
-#include "dmxstat.h"
-#include "dmxlog.h"
-#include <sys/time.h>
-
-static int        dmxSyncInterval = 100; /* Default interval in milliseconds */
-static OsTimerPtr dmxSyncTimer;
-static int        dmxSyncPending;
-
-static void dmxDoSync(DMXScreenInfo *dmxScreen)
-{
-    dmxScreen->needsSync = FALSE;
-
-    if (!dmxScreen->beDisplay)
-	return; /* FIXME: Is this correct behavior for sync stats? */
-
-    if (!dmxStatInterval) {
-        XSync(dmxScreen->beDisplay, False);
-    } else {
-        struct timeval start, stop;
-        
-        gettimeofday(&start, 0);
-        XSync(dmxScreen->beDisplay, False);
-        gettimeofday(&stop, 0);
-        dmxStatSync(dmxScreen, &stop, &start, dmxSyncPending);
-    }
-}
-
-static CARD32 dmxSyncCallback(OsTimerPtr timer, CARD32 time, pointer arg)
-{
-    int           i;
-
-    if (dmxSyncPending) {
-        for (i = 0; i < dmxNumScreens; i++) {
-            DMXScreenInfo *dmxScreen = &dmxScreens[i];
-            if (dmxScreen->needsSync) dmxDoSync(dmxScreen);
-        }
-    }
-    dmxSyncPending = 0;
-    return 0;                   /* Do not place on queue again */
-}
-
-static void dmxSyncBlockHandler(pointer blockData, OSTimePtr pTimeout,
-                                pointer pReadMask)
-{
-    TimerForce(dmxSyncTimer);
-}
-
-static void dmxSyncWakeupHandler(pointer blockData, int result,
-                                 pointer pReadMask)
-{
-}
-
-/** Request the XSync() batching optimization with the specified \a
- * interval (in mS).  If the \a interval is 0, 100mS is used.  If the \a
- * interval is less than 0, then the XSync() batching optimization is
- * not requested (e.g., so the -syncbatch -1 command line option can
- * turn off the default 100mS XSync() batching).
- *
- * Note that the parameter to this routine is a string, since it will
- * usually be called from #ddxProcessArgument in #dmxinit.c */
-void dmxSyncActivate(const char *interval)
-{
-    dmxSyncInterval = (interval ? atoi(interval) : 100);
-
-    if (dmxSyncInterval < 0) dmxSyncInterval = 0;
-}
-
-/** Initialize the XSync() batching optimization, but only if
- * #dmxSyncActivate was last called with a non-negative value. */
-void dmxSyncInit(void)
-{
-    if (dmxSyncInterval) {
-        RegisterBlockAndWakeupHandlers(dmxSyncBlockHandler,
-                                       dmxSyncWakeupHandler,
-                                       NULL);
-        dmxLog(dmxInfo, "XSync batching with %d ms interval\n",
-               dmxSyncInterval);
-    } else {
-        dmxLog(dmxInfo, "XSync batching disabled\n");
-    }
-}
-
-/** Request an XSync() to the display used by \a dmxScreen.  If \a now
- * is TRUE, call XSync() immediately instead of waiting for the next
- * XSync() batching point.  Note that if XSync() batching was deselected
- * with #dmxSyncActivate() before #dmxSyncInit() was called, then no
- * XSync() batching is performed and this function always calles XSync()
- * immediately.
- *
- * (Note that this function uses TimerSet but works correctly in the
- * face of a server generation.  See the source for details.)
- *
- * If \a dmxScreen is \a NULL, then all pending syncs will be flushed
- * immediately.
- */
-void dmxSync(DMXScreenInfo *dmxScreen, Bool now)
-{
-    static unsigned long dmxGeneration = 0;
-
-    if (dmxSyncInterval) {
-        if (dmxGeneration != serverGeneration) {
-            /* Server generation does a TimerInit, which frees all
-             * timers.  So, at this point dmxSyncTimer is either:
-             * 1) NULL, iff dmxGeneration == 0,
-             * 2) freed, if it was on a queue (dmxSyncPending != 0), or
-             * 3) allocated, if it wasn't on a queue (dmxSyncPending == 0)
-             */
-            if (dmxSyncTimer && !dmxSyncPending) xfree(dmxSyncTimer);
-            dmxSyncTimer  = NULL;
-            now           = TRUE;
-            dmxGeneration = serverGeneration;
-        }
-                                /* Queue sync */
-        if (dmxScreen) {
-            dmxScreen->needsSync = TRUE;
-            ++dmxSyncPending;
-        }
-
-                                /* Do sync or set time for later */
-        if (now || !dmxScreen) {
-            if (!TimerForce(dmxSyncTimer)) dmxSyncCallback(NULL, 0, NULL);
-            /* At this point, dmxSyncPending == 0 because
-             * dmxSyncCallback must have been called. */
-            if (dmxSyncPending)
-                dmxLog(dmxFatal, "dmxSync(%s,%d): dmxSyncPending = %d\n",
-                       dmxScreen ? dmxScreen->name : "", now, dmxSyncPending);
-        } else {
-            dmxScreen->needsSync = TRUE;
-            if (dmxSyncPending == 1)
-                dmxSyncTimer = TimerSet(dmxSyncTimer, 0, dmxSyncInterval,
-                                        dmxSyncCallback, NULL);
-        }
-    } else {
-                                /* If dmxSyncInterval is not being used,
-                                 * then all the backends are already
-                                 * up-to-date. */
-        if (dmxScreen) dmxDoSync(dmxScreen);
-    }
-}