Imported nx-X11-3.1.0-1.tar.gznx-X11/3.1.0-1

Summary: Imported nx-X11-3.1.0-1.tar.gz
Keywords:

Imported nx-X11-3.1.0-1.tar.gz
into Git repository

1 files changed, 1012 insertions, 0 deletions

diff --git a/nx-X11/programs/xterm/terminfo b/nx-X11/programs/xterm/terminfo
new file mode 100644
index 000000000..f0b5f4d3a
--- /dev/null
+++ b/nx-X11/programs/xterm/terminfo
@@ -0,0 +1,1012 @@
+# $XTermId: terminfo,v 1.111 2005/11/03 13:17:28 tom Exp $
+#
+# $Xorg: terminfo,v 1.3 2000/08/17 19:55:10 cpqbld Exp $
+#
+# meml locks memory above the cursor; memu unlocks (ala HP terminals)
+#
+# XFree86 updates/notes/new entries (including xterm-8bit, xterm-16color)
+# - Thomas E. Dickey
+#
+# $XFree86: xc/programs/xterm/terminfo,v 3.57 2005/11/03 13:17:28 dickey Exp $
+#
+# Special Capabilities:
+# --------------------
+# ich has a corresponding capability that inserts a single blank.  We could
+#	have used ich1=\E[@, which works with ncurses, but that is not standard
+#	behavior.  If it is set, then SVr4 vi (e.g., Solaris 2.6) emits both
+#	smir/rmir and ich1.
+# meml locks memory above the cursor; memu unlocks (ala HP terminals).  This
+#	is not recognized by some older (e.g., SVr3) tic programs, but none
+#	do more than warn about it.  Ignore the warning.
+# smcup clears memory before switching to the alternate screen.  The older
+#	(deprecated) \E[?47h did not do this, requiring applications to
+#	embed a \E[2J in the rmcup string.  However, that behavior cannot
+#	be disabled via titeInhibit, making that resource not function as
+#	intended on systems with terminfo.
+# rs2/is2 are shorter with XFree86 xterm because it supports DECSTR.  We
+#	use the shorter sequence for compatibility with the termcap, which
+#	is trimmed to keep it shorter than 1023 characters.  It (escape \E[!p)
+#	replaces these in the conventional vt100 reset-string:
+#		\E7	- save cursor (fixes origin-mode side-effect)
+#		\E[r	- reset scrolling margins
+#		\E[m	- reset SGR (including color)
+#		\E[?7h	- reset wraparound mode (DECAWM)
+#		\E[?1l	- reset application cursor keys (DECCKM)
+#		\E[?6l	- reset origin mode (DECOM)
+#		\E8	- restore cursor
+#	DECSTR is recognized by XFree86 xterm even in vt52 mode.
+#
+# Editing Keypad:
+# --------------
+# XFree86 xterm emulates vt220 if the decTerminalID resource is set to 200 or
+# higher.  Otherwise it emulates a vt100 or vt52 depending on the value of the
+# resource.  When emulating a vt220, we support the editing keypad.  Sun and PC
+# keyboards have an editing keypad which is similar to the vt220:
+#
+#	VT220 editing keypad
+#	----------------------------
+#	Find      Insert      Remove
+#	Select    Prev        Next
+#	----------------------------
+#
+#	Sun/PC editing keypad
+#	----------------------------
+#	Insert    Home        PageUp
+#	Delete    End         PageDn
+#	----------------------------
+#
+# If the sunKeyboard resource is true, we map it this way (adjusting the values
+# of Home, End and Delete):
+#	VT220		      Sun/PC
+#	----------------------------
+#	Find		      Home
+#	Select		      End
+#	Insert		      Insert
+#	Remove		      Delete
+#	Prev		      PageUp
+#	Next		      PageDn
+#	----------------------------
+#
+# Note that all of the keys on the editing keypad transmit escape sequences.  A
+# vt220 does this only when in vt220 mode; when emulating a vt100 the editing
+# keypad is inactive.
+#
+# Alternative keycodes:
+# --------------------
+# Several of the function keys have alternative names, depending on the type of
+# host which your xterm is connected to.  DEC (i.e., the VMS system) uses F15
+# as the HELP key, F16 as the DO key.  Unix applications generally do not do
+# this.  Curses applications in particular, assign a unique keycode to each
+# capability string.  These terminal descriptions do not have conflicting
+# definitions, to ensure that Unix curses applications use a consistent set of
+# keycodes.  To get a VMS-bias, make these substitutions:
+#	1. change khome to kfnd
+#	2. change kend to kslt
+# The original xterm-r6 entry does in fact have a VMS bias.
+#
+# Some legacy applications using the termcap emulation may expect kll where
+# we have specified kend.
+#
+# Function keys with modifiers (Sun/PC):
+# -------------------------------------
+#	Shift-Fx          - kf{12+x}
+#	Control-Fx        - kf{24+x}
+#	Shift-Control-Fx  - kf{36+x}
+#
+# The terminfo defines some special keys which are documented as "shifted",
+# e.g., kDC is shifted-delete-character.
+#
+# Note however, that even though the terminfo says a key might be sent, there
+# may be conflicts which prevent this.  For example, it is common to use
+# shifted pageup and pagedown for window manager functions.  The default
+# translation for xterm since X11R4 has overridden shifted Insert, Select,
+# PageUp and PageDown, which correspond to terminfo kIC, kEND, kPRV and kNXT
+# respectively.
+#
+xterm-new|modern xterm terminal emulator,
+	npc,
+	indn=\E[%p1%dS,
+	kDC=\E[3;2~,
+	kEND=\E[1;2F,
+	kHOM=\E[1;2H,
+	kIC=\E[2;2~,
+	kLFT=\E[1;2D,
+	kNXT=\E[6;2~,
+	kPRV=\E[5;2~,
+	kRIT=\E[1;2C,
+	kb2=\EOE,
+	kcbt=\E[Z,
+	kcub1=\EOD,
+	kcud1=\EOB,
+	kcuf1=\EOC,
+	kcuu1=\EOA,
+	kend=\EOF,
+	kent=\EOM,
+	khome=\EOH,
+	kich1=\E[2~,
+	kind=\E[1;2B,
+	kmous=\E[M,
+	knp=\E[6~,
+	kpp=\E[5~,
+	kri=\E[1;2A,
+	rin=\E[%p1%dT,
+	use=xterm+pcfkeys,
+	use=xterm-basic,
+# Encode modifiers using parameters (see ctlseqs.msg).
+# Note that this is unrelated to PCTERM.
+#
+# Some names are extensions allowed by ncurses:
+#	kDN, kDN5, kDN6, kLFT5, kLFT6, kRIT5, kRIT6, kUP, kUP5, kUP6
+xterm+pcfkeys|fragment for PC-style keys,
+	kf1=\EOP,
+	kf10=\E[21~,
+	kf11=\E[23~,
+	kf12=\E[24~,
+	kf13=\EO2P,
+	kf14=\EO2Q,
+	kf15=\EO2R,
+	kf16=\EO2S,
+	kf17=\E[15;2~,
+	kf18=\E[17;2~,
+	kf19=\E[18;2~,
+	kf2=\EOQ,
+	kf20=\E[19;2~,
+	kf21=\E[20;2~,
+	kf22=\E[21;2~,
+	kf23=\E[23;2~,
+	kf24=\E[24;2~,
+	kf25=\EO5P,
+	kf26=\EO5Q,
+	kf27=\EO5R,
+	kf28=\EO5S,
+	kf29=\E[15;5~,
+	kf3=\EOR,
+	kf30=\E[17;5~,
+	kf31=\E[18;5~,
+	kf32=\E[19;5~,
+	kf33=\E[20;5~,
+	kf34=\E[21;5~,
+	kf35=\E[23;5~,
+	kf36=\E[24;5~,
+	kf37=\EO6P,
+	kf38=\EO6Q,
+	kf39=\EO6R,
+	kf4=\EOS,
+	kf40=\EO6S,
+	kf41=\E[15;6~,
+	kf42=\E[17;6~,
+	kf43=\E[18;6~,
+	kf44=\E[19;6~,
+	kf45=\E[20;6~,
+	kf46=\E[21;6~,
+	kf47=\E[23;6~,
+	kf48=\E[24;6~,
+	kf49=\EO3P,
+	kf5=\E[15~,
+	kf50=\EO3Q,
+	kf51=\EO3R,
+	kf52=\EO3S,
+	kf53=\E[15;3~,
+	kf54=\E[17;3~,
+	kf55=\E[18;3~,
+	kf56=\E[19;3~,
+	kf57=\E[20;3~,
+	kf58=\E[21;3~,
+	kf59=\E[23;3~,
+	kf6=\E[17~,
+	kf60=\E[24;3~,
+	kf61=\EO4P,
+	kf62=\EO4Q,
+	kf63=\EO4R,
+	kf7=\E[18~,
+	kf8=\E[19~,
+	kf9=\E[20~,
+	kDN=\E[1;2B,
+	kDN5=\E[1;5B,
+	kDN6=\E[1;6B,
+	kLFT5=\E[1;5D,
+	kLFT6=\E[1;6D,
+	kRIT5=\E[1;5C,
+	kRIT6=\E[1;6C,
+	kUP=\E[1;2A,
+	kUP5=\E[1;5A,
+	kUP6=\E[1;6A,
+#
+# This chunk is used for building the VT220/Sun/PC keyboard variants.
+xterm-basic|modern xterm terminal emulator - common,
+	am,
+	bce,
+	km,
+	mc5i,
+	mir,
+	msgr,
+	xenl,
+	colors#8,
+	cols#80,
+	it#8,
+	lines#24,
+	pairs#64,
+	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G,
+	blink=\E[5m,
+	bold=\E[1m,
+	cbt=\E[Z,
+	civis=\E[?25l,
+	clear=\E[H\E[2J,
+	cnorm=\E[?12l\E[?25h,
+	cr=^M,
+	csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD,
+	cub1=^H,
+	cud=\E[%p1%dB,
+	cud1=^J,
+	cuf=\E[%p1%dC,
+	cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA,
+	cuu1=\E[A,
+	cvvis=\E[?12;25h,
+	dch=\E[%p1%dP,
+	dch1=\E[P,
+	dl=\E[%p1%dM,
+	dl1=\E[M,
+	ech=\E[%p1%dX,
+	ed=\E[J,
+	el=\E[K,
+	el1=\E[1K,
+	flash=\E[?5h$<100/>\E[?5l,
+	home=\E[H,
+	hpa=\E[%i%p1%dG,
+	ht=^I,
+	hts=\EH,
+	ich=\E[%p1%d@,
+	il=\E[%p1%dL,
+	il1=\E[L,
+	ind=^J,
+	invis=\E[8m,
+	is2=\E[!p\E[?3;4l\E[4l\E>,
+	kbs=^H,
+	kdch1=\E[3~,
+	mc0=\E[i,
+	mc4=\E[4i,
+	mc5=\E[5i,
+	meml=\El,
+	memu=\Em,
+	op=\E[39;49m,
+	rc=\E8,
+	rev=\E[7m,
+	ri=\EM,
+	rmacs=\E(B,
+	rmam=\E[?7l,
+	rmcup=\E[?1049l,
+	rmir=\E[4l,
+	rmkx=\E[?1l\E>,
+	rmso=\E[27m,
+	rmul=\E[24m,
+	rs1=\Ec,
+	rs2=\E[!p\E[?3;4l\E[4l\E>,
+	sc=\E7,
+	setab=\E[4%p1%dm,
+	setaf=\E[3%p1%dm,
+	setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+	setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
+	sgr0=\E[m\E(B,
+	smacs=\E(0,
+	smam=\E[?7h,
+	smcup=\E[?1049h,
+	smir=\E[4h,
+	smkx=\E[?1h\E=,
+	smso=\E[7m,
+	smul=\E[4m,
+	tbc=\E[3g,
+	u6=\E[%i%d;%dR,
+	u7=\E[6n,
+	u8=\E[?1;2c,
+	u9=\E[c,
+	vpa=\E[%i%p1%dd,
+#
+# The xterm-new description has all of the features, but is not completely
+# compatible with vt220.  If you are using a Sun or PC keyboard, set the
+# sunKeyboard resource to true:
+#	+ maps the editing keypad
+#	+ interprets control-function-key as a second array of keys, so a
+#	  12-fkey keyboard can support vt220's 20-fkeys.
+#	+ maps numeric keypad "+" to ",".
+#	+ uses DEC-style control sequences for the application keypad.
+#
+# Some packagers modify xterm's resource definitions to provide extra function
+# keys by using the shift-modifier in the translations resource.  However, that
+# interferes with the DECUDK functionality.
+#	  
+xterm-vt220|xterm emulating vt220,
+	ka1=\EOw,
+	ka3=\EOy,
+	kb2=\EOu,
+	kc1=\EOq,
+	kc3=\EOs,
+	kcbt=\E[Z,
+	kcub1=\EOD,
+	kcud1=\EOB,
+	kcuf1=\EOC,
+	kcuu1=\EOA,
+	kend=\E[4~,
+	kent=\EOM,
+	kf1=\EOP,
+	kf10=\E[21~,
+	kf11=\E[23~,
+	kf12=\E[24~,
+	kf13=\E[25~,
+	kf14=\E[26~,
+	kf15=\E[28~,
+	kf16=\E[29~,
+	kf17=\E[31~,
+	kf18=\E[32~,
+	kf19=\E[33~,
+	kf2=\EOQ,
+	kf20=\E[34~,
+	kf3=\EOR,
+	kf4=\EOS,
+	kf5=\E[15~,
+	kf6=\E[17~,
+	kf7=\E[18~,
+	kf8=\E[19~,
+	kf9=\E[20~,
+	khome=\E[1~,
+	kich1=\E[2~,
+	kmous=\E[M,
+	knp=\E[6~,
+	kpp=\E[5~,
+	use=xterm-basic,
+#
+xterm-vt52|xterm emulating dec vt52,
+	cols#80,
+	it#8,
+	lines#24,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G,
+	clear=\EH\EJ,
+	cr=^M,
+	cub1=\ED,
+	cud1=\EB,
+	cuf1=\EC,
+	cup=\EY%p1%' '%+%c%p2%' '%+%c,
+	cuu1=\EA,
+	ed=\EJ,
+	el=\EK,
+	home=\EH,
+	ht=^I,
+	ind=^J,
+	kbs=^H,
+	kcub1=\ED,
+	kcud1=\EB,
+	kcuf1=\EC,
+	kcuu1=\EA,
+	nel=^M^J,
+	ri=\EI,
+	rmacs=\EG,
+	smacs=\EF,
+#
+# kf30-kf45 are keysyms XK_R1 through XK_R15 on the Sun keyboard.
+xterm-sun|xterm with sun function keys,
+	kb2=\E[218z,
+	kcpy=\E[197z,
+	kcub1=\EOD,
+	kcud1=\EOB,
+	kcuf1=\EOC,
+	kcuu1=\EOA,
+	kdch1=\177,
+	kend=\E[220z,
+	kent=\EOM,
+	kf1=\E[224z,
+	kf10=\E[233z,
+	kf11=\E[192z,
+	kf12=\E[193z,
+	kf13=\E[194z,
+	kf14=\E[195z,
+	kf15=\E[196z,
+	kf17=\E[198z,
+	kf18=\E[199z,
+	kf19=\E[200z,
+	kf2=\E[225z,
+	kf20=\E[201z,
+	kf3=\E[226z,
+	kf31=\E[208z,
+	kf32=\E[209z,
+	kf33=\E[210z,
+	kf34=\E[211z,
+	kf35=\E[212z,
+	kf36=\E[213z,
+	kf38=\E[215z,
+	kf4=\E[227z,
+	kf40=\E[217z,
+	kf42=\E[219z,
+	kf44=\E[221z,
+	kf5=\E[228z,
+	kf6=\E[229z,
+	kf7=\E[230z,
+	kf8=\E[231z,
+	kf9=\E[232z,
+	kfnd=\E[200z,
+	khlp=\E[196z,
+	khome=\E[214z,
+	kich1=\E[2z,
+	kmous=\E[M,
+	knp=\E[222z,
+	kpp=\E[216z,
+	kund=\E[195z,
+	use=xterm-basic,
+#
+xterm-hp|xterm with hpterm function keys,
+	kclr=\EJ,
+	kcub1=\ED,
+	kcud1=\EB,
+	kcuf1=\EC,
+	kcuu1=\EA,
+	kdch1=\EP,
+	kend=\EF,
+	kf1=\Ep,
+	kf2=\Eq,
+	kf3=\Er,
+	kf4=\Es,
+	kf5=\Et,
+	kf6=\Eu,
+	kf7=\Ev,
+	kf8=\Ew,
+	khome=\Eh,
+	kich1=\EQ,
+	knp=\ES,
+	kpp=\ET,
+	use=xterm-basic,
+xterm-sco|xterm with SCO function keys,
+	kcub1=\E[D,
+	kcud1=\E[B,
+	kcuf1=\E[C,
+	kcuu1=\E[A,
+	kend=\E[F,
+	kf1=\E[M,
+	kf10=\E[V,
+	kf11=\E[W,
+	kf12=\E[X,
+	kf13=\E[Y,
+	kf15=\E[a,
+	kf16=\E[b,
+	kf17=\E[c,
+	kf18=\E[d,
+	kf19=\E[e,
+	kf2=\E[N,
+	kf20=\E[f,
+	kf21=\E[g,
+	kf22=\E[h,
+	kf23=\E[i,
+	kf24=\E[j,
+	kf25=\E[k,
+	kf26=\E[l,
+	kf27=\E[m,
+	kf28=\E[n,
+	kf29=\E[o,
+	kf3=\E[O,
+	kf30=\E[p,
+	kf31=\E[q,
+	kf32=\E[r,
+	kf33=\E[s,
+	kf34=\E[t,
+	kf35=\E[u,
+	kf4=\E[P,
+	kf5=\E[Q,
+	kf6=\E[R,
+	kf7=\E[S,
+	kf8=\E[T,
+	kf9=\E[U,
+	khome=\E[H,
+	kich1=\E[L,
+	knp=\E[G,
+	kpp=\E[I,
+	use=xterm-basic,
+#
+# Other variants:
+xterm-24|xterms|vs100|xterm terminal emulator (X Window System),
+	lines#24,
+	use=xterm,
+xterm-65|xterm with tall window 65x80 (X Window System),
+	lines#65,
+	use=xterm,
+xterm-bold|xterm with bold instead of underline (X Window System),
+	smso=\E[7m,
+	smul=\E[1m,
+	use=xterm,
+xterm-boldso|xterm with bold for standout (X Window System),
+	rmso=\E[m,
+	smso=\E[1m,
+	use=xterm,
+xterm-mono|monochrome xterm,
+	bce@,
+	colors@,
+	ncv@,
+	pairs@,
+	op@,
+	setab@,
+	setaf@,
+	setb@,
+	setf@,
+	sgr@,
+	use=xterm,
+#
+# VTxxx terminals are usually set up so that full-screen applications will use
+# the cursor application mode strings.  This is good for full-screen
+# applications, including legacy applications which may have hard-coded
+# behavior, but bad for interactive shells (e.g., tcsh, bash) which use arrow
+# keys to scroll through a history of command strings.
+#
+# To see the difference between normal/application modes, consider this example:
+#	+ In normal (non-application) mode, the terminal transmits a down-arrow
+#	  as \E[C, which happens to echo as a down-arrow.
+#	+ In application mode the terminal transmits \EOC, which echoes as C.
+#	  That is because the \EO is the SS3 control, which says to use the
+#	  character from the G3 character set for the next cell.
+# 
+# One example of hard-coded behavior would be for applications written to work
+# with VT52 and VT100 terminals.  If the application's parser ignores 'O' and
+# '?' characters after the escape, then the cursor and keypad strings for the
+# two terminals are the same.  (Indeed, one of the first curses applications
+# which I used did something like this to cover "ANSI" terminals -TD).
+#
+# To make this work (leaving the cursor keys in normal mode), we have to adjust
+# the terminal initialization sequences:
+#
+#	smkx/rmkx set/reset the cursor and keypad application modes.  We retain
+#		the latter (otherwise many applications fail).
+#
+#	smcup/rmcup set/restore cursor-addressing mode for full-screen
+#		applications.  For xterm, this normally means the alternate
+#		screen, which is not compatible with interactive shells.  Some
+#		programs are "smart" and disable these.
+#
+xterm-noapp|xterm with cursor keys in normal mode,
+	kcub1=\E[D,
+	kcud1=\E[B,
+	kcuf1=\E[C,
+	kcuu1=\E[A,
+	rmcup@,
+	rmkx=\E>,
+	smcup@,
+	smkx=\E=,
+	use=xterm,
+#
+# This should work for the commonly used "color xterm" variations (XFree86
+# xterm, color_xterm, nxterm, rxvt).  Note that it does not set 'bce', so for
+# XFree86 and and rxvt, some applications that use colors will be less
+# efficient, and in a few special cases (with "smart" optimization) the wrong
+# color will be painted in spots.
+xterm-color|generic "ANSI" color xterm (X Window System),
+	colors#8,
+	ncv@,
+	pairs#64,
+	op=\E[m,
+	setab=\E[4%p1%dm,
+	setaf=\E[3%p1%dm,
+	use=xterm-r6,
+#
+# vi may work better with this entry, because vi
+# doesn't use insert mode much
+xterm-ic|xterm-vi|xterm with insert character instead of insert mode,
+	mir@,
+	ich=\E[%p1%d@,
+	ich1=\E[@,
+	rmir@,
+	smir@,
+	use=xterm,
+#
+# This is used only for testing (it's not relevant to DEC VTxxx terminals, but
+# to ncurses).
+xterm-xmc|xterm with magic-cookie glitch,
+	xmc#1,
+	use=xterm-new,
+#
+# This one also is primarily for testing ncurses; while the ISO 6429 defines
+# the REP control, none of the DEC VTxxx terminals (VT52 through VT420) support
+# it.
+xterm-rep|xterm with repeat-character control,
+	rep=%p1%c\E[%p2%{1}%-%db,
+	use=xterm-new,
+#
+# This is mainly for testing xterm; the real VT220 will not let you switch
+# character sets without first altering the keyboard language in the setup
+# screen.  Some emulators allow this anyway.  (Note that these strings are
+# normally used only for printers).  The parameter to csnm and scs is the same
+# in both cases:  the keyboard language parameter returned by CSI ? 2 6 n.
+xterm-nrc|xterm with VT220 national replacement character sets,
+	csnm=%?%p1%{1}%=%tNorth American%e%p1%{2}%=%tBritish%e%p1%{3}%=%tFlemish%e%p1%{4}%=%tFrench Canadian%e%p1%{5}%=%tDanish%e%p1%{6}%=%tFinnish%e%p1%{7}%=%tGerman%e%p1%{8}%=%tDutch%e%p1%{9}%=%tItalian%e%p1%{10}%=%tSwiss (French)%e%p1%{11}%=%tSwiss (German)%e%p1%{12}%=%tSwedish%e%p1%{13}%=%tNorwegian%e%p1%{14}%=%tFrench/Belgian%e%p1%{15}%=%tSpanish%;,
+	scs=%?%p1%{1}%=%t\E(B%e%p1%{2}%=%t\E(A%e%p1%{3}%=%t\E(R%e%p1%{4}%=%t\E(9%e%p1%{5}%=%t\E(E%e%p1%{6}%=%t\E(5%e%p1%{7}%=%t\E(K%e%p1%{8}%=%t\E(4%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(=%e%p1%{11}%=%t\E(=%e%p1%{12}%=%t\E(7%e%p1%{13}%=%t\E(E%e%p1%{14}%=%t\E(R%e%p1%{15}%=%t\E(Z%;,
+	use=xterm-new,
+#
+# Foreground 0-15 maps (with toggles) into 30-37 & 90-97
+# Background 0-15 maps (with toggles) into 40-47 & 100-107
+#
+# Originally I suppressed setaf/setab, since ANSI specifies only 8 colors, but
+# Stephen Marley persuaded me to allow the "ANSI" color controls to extend to
+# 16 colors.  (Note that ncurses 4.2 uses setf/setb from this description;
+# however 5.0 selects either according to their availability).  - T.Dickey
+#
+# SVr4 curses does not use more than 8 colors anyway, so using 16 colors is
+# either for terminfo-level applications or via ncurses.
+xterm-16color|xterm with 16 colors,
+	colors#16,
+	ncv#32,
+	pairs#256,
+	setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
+	setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
+	setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
+	setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
+	use=xterm-new,
+#
+# This uses RGB values 0..1000
+#
+# 256 colors should give 65536 pairs, but terminfo stores numbers in a signed
+# short.  Most people will not notice problems with only 32767 pairs.
+xterm-256color|xterm with 256 colors,
+	ccc,
+	colors#256,
+	pairs#32767,
+	initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
+	setab=\E[48;5;%p1%dm,
+	setaf=\E[38;5;%p1%dm,
+	setb=\E[48;5;%p1%dm,
+	setf=\E[38;5;%p1%dm,
+	use=xterm-new,
+xterm-88color|xterm with 88 colors,
+	colors#88,
+	pairs#7744,
+	use=xterm-256color,
+#
+# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
+# To use it, your decTerminalID resource must be set to 200 or above, and the
+# sunKeyboard resource set to true.
+#
+#	HTS	\E H	\210
+#	RI	\E M	\215
+#	SS3	\E O	\217
+#	CSI	\E [	\233
+#
+xterm-8bit|xterm terminal emulator with 8-bit controls (X Window System),
+	am,
+	bce,
+	km,
+	mc5i,
+	mir,
+	msgr,
+	npc,
+	xenl,
+	colors#8,
+	cols#80,
+	it#8,
+	lines#24,
+	pairs#64,
+	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G,
+	blink=\2335m,
+	bold=\2331m,
+	cbt=\233Z,
+	civis=\233?25l,
+	clear=\233H\2332J,
+	cnorm=\233?25l\233?25h,
+	cr=^M,
+	csr=\233%i%p1%d;%p2%dr,
+	cub=\233%p1%dD,
+	cub1=^H,
+	cud=\233%p1%dB,
+	cud1=^J,
+	cuf=\233%p1%dC,
+	cuf1=\233C,
+	cup=\233%i%p1%d;%p2%dH,
+	cuu=\233%p1%dA,
+	cuu1=\233A,
+	cvvis=\233?12;25h,
+	dch=\233%p1%dP,
+	dch1=\233P,
+	dl=\233%p1%dM,
+	dl1=\233M,
+	ech=\233%p1%dX,
+	ed=\233J,
+	el=\233K,
+	el1=\2331K,
+	flash=\233?5h$<100/>\233?5l,
+	home=\233H,
+	hpa=\233%i%p1%dG,
+	ht=^I,
+	hts=\210,
+	ich=\233%p1%d@,
+	il=\233%p1%dL,
+	il1=\233L,
+	ind=^J,
+	invis=\2338m,
+	is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
+	ka1=\217w,
+	ka3=\217u,
+	kb2=\217y,
+	kbeg=\217E,
+	kbs=^H,
+	kc1=\217q,
+	kc3=\217s,
+	kcbt=\233Z,
+	kcub1=\217D,
+	kcud1=\217B,
+	kcuf1=\217C,
+	kcuu1=\217A,
+	kdch1=\2333~,
+	kend=\2334~,
+	kent=\217M,
+	kf1=\23311~,
+	kf10=\23321~,
+	kf11=\23323~,
+	kf12=\23324~,
+	kf13=\23325~,
+	kf14=\23326~,
+	kf15=\23328~,
+	kf16=\23329~,
+	kf17=\23331~,
+	kf18=\23332~,
+	kf19=\23333~,
+	kf2=\23312~,
+	kf20=\23334~,
+	kf3=\23313~,
+	kf4=\23314~,
+	kf5=\23315~,
+	kf6=\23317~,
+	kf7=\23318~,
+	kf8=\23319~,
+	kf9=\23320~,
+	khome=\2331~,
+	kich1=\2332~,
+	kmous=\233M,
+	knp=\2336~,
+	kpp=\2335~,
+	mc0=\233i,
+	mc4=\2334i,
+	mc5=\2335i,
+	meml=\El,
+	memu=\Em,
+	op=\23339;49m,
+	rc=\E8,
+	rev=\2337m,
+	ri=\215,
+	rmacs=\E(B,
+	rmam=\233?7l,
+	rmcup=\233?1049l,
+	rmir=\2334l,
+	rmkx=\233?1l\E>,
+	rmso=\23327m,
+	rmul=\23324m,
+	rs1=\Ec,
+	rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
+	sc=\E7,
+	setab=\2334%p1%dm,
+	setaf=\2333%p1%dm,
+	setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+	setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+	sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
+	sgr0=\233m\E(B,
+	smacs=\E(0,
+	smam=\233?7h,
+	smcup=\233?1049h,
+	smir=\2334h,
+	smkx=\233?1h\E=,
+	smso=\2337m,
+	smul=\2334m,
+	tbc=\2333g,
+	u6=\233[%i%d;%dR,
+	u7=\E[6n,
+	u8=\233[?1;2c,
+	u9=\E[c,
+	vpa=\233%i%p1%dd,
+#
+# Compatible with the R6 xterm, with the following changes:
+#	+ added acsc (perhaps some versions of tic assume the standard vt100
+#	  alternate character set)
+#	+ added u6, u7, u8, u9 strings for Daniel Weaver's tack program.
+#	+ added kmous string for ncurses.
+#	+ added khome/kend strings (which conflict with kfnd/kslt, see note).
+xterm-r6|xterm-old|xterm X11R6 version,
+	am,
+	km,
+	mir,
+	msgr,
+	xenl,
+	cols#80,
+	it#8,
+	lines#24,
+	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G,
+	blink@,
+	bold=\E[1m,
+	clear=\E[H\E[2J,
+	cr=^M,
+	csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD,
+	cub1=^H,
+	cud=\E[%p1%dB,
+	cud1=^J,
+	cuf=\E[%p1%dC,
+	cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA,
+	cuu1=\E[A,
+	dch=\E[%p1%dP,
+	dch1=\E[P,
+	dl=\E[%p1%dM,
+	dl1=\E[M,
+	ed=\E[J,
+	el=\E[K,
+	enacs=\E)0,
+	home=\E[H,
+	ht=^I,
+	il=\E[%p1%dL,
+	il1=\E[L,
+	ind=^J,
+	is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
+	kbs=^H,
+	kcub1=\EOD,
+	kcud1=\EOB,
+	kcuf1=\EOC,
+	kcuu1=\EOA,
+	kdch1=\177,
+	kend=\E[4~,
+	kf1=\E[11~,
+	kf10=\E[21~,
+	kf11=\E[23~,
+	kf12=\E[24~,
+	kf13=\E[25~,
+	kf14=\E[26~,
+	kf15=\E[28~,
+	kf16=\E[29~,
+	kf17=\E[31~,
+	kf18=\E[32~,
+	kf19=\E[33~,
+	kf2=\E[12~,
+	kf20=\E[34~,
+	kf3=\E[13~,
+	kf4=\E[14~,
+	kf5=\E[15~,
+	kf6=\E[17~,
+	kf7=\E[18~,
+	kf8=\E[19~,
+	kf9=\E[20~,
+	khome=\E[1~,
+	kich1=\E[2~,
+	kmous=\E[M,
+	knp=\E[6~,
+	kpp=\E[5~,
+	meml=\El,
+	memu=\Em,
+	rc=\E8,
+	rev=\E[7m,
+	ri=\EM,
+	rmacs=^O,
+	rmcup=\E[2J\E[?47l\E8,
+	rmir=\E[4l,
+	rmkx=\E[?1l\E>,
+	rmso=\E[m,
+	rmul=\E[m,
+	rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
+	sc=\E7,
+	sgr0=\E[m,
+	smacs=^N,
+	smcup=\E7\E[?47h,
+	smir=\E[4h,
+	smkx=\E[?1h\E=,
+	smso=\E[7m,
+	smul=\E[4m,
+	tbc=\E[3g,
+	u6=\E[%i%d;%dR,
+	u7=\E[6n,
+	u8=\E[?1;2c,
+	u9=\E[c,
+#
+# Compatible with the R5 xterm, with the following changes:
+#	+ changed 'blink=@', to 'blink@' (the former meant that "@" would start
+#	  a blink, the latter that it is not supported).
+#	+ changed kf1 through kf4 to correspond with actual usage.  Though X
+#	  supports keypad symbols for PF1 to PF4, and xterm interprets these
+#	  correctly, the F1 to F4 codes are commonly (but incorrectly) used.
+#	+ moved reset string from rs1 to rs2, to correlate better with termcap.
+#	+ make khome consistent with other entries.
+#	+ use rmul/smul, rmir/smir from termcap, but not rmcup/smcup because
+#	  not everyone wants the alternate screen.
+#	+ added u6, u7, u8, u9 strings for Daniel Weaver's tack program.
+#	+ added kmous string for ncurses.
+xterm-r5|xterm R5 version,
+	am,
+	km,
+	msgr,
+	xenl,
+	cols#80,
+	it#8,
+	lines#24,
+	bel=^G,
+	blink@,
+	bold=\E[1m,
+	clear=\E[H\E[2J,
+	cr=^M,
+	csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD,
+	cub1=^H,
+	cud=\E[%p1%dB,
+	cud1=^J,
+	cuf=\E[%p1%dC,
+	cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA,
+	cuu1=\E[A,
+	dch=\E[%p1%dP,
+	dch1=\E[P,
+	dl=\E[%p1%dM,
+	dl1=\E[M,
+	ed=\E[J,
+	el=\E[K,
+	home=\E[H,
+	ht=^I,
+	hts=\EH,
+	ich=\E[%p1%d@,
+	ich1=\E[@,
+	il=\E[%p1%dL,
+	il1=\E[L,
+	ind=^J,
+	kbs=^H,
+	kcub1=\EOD,
+	kcud1=\EOB,
+	kcuf1=\EOC,
+	kcuu1=\EOA,
+	kdch1=\177,
+	kdl1=\E[31~,
+	kel=\E[8~,
+	kend=\E[4~,
+	kf0=\EOq,
+	kf1=\E[11~,
+	kf10=\E[21~,
+	kf11=\E[23~,
+	kf12=\E[24~,
+	kf2=\E[12~,
+	kf3=\E[13~,
+	kf4=\E[14~,
+	kf5=\E[15~,
+	kf6=\E[17~,
+	kf7=\E[18~,
+	kf8=\E[19~,
+	kf9=\E[20~,
+	khome=\E[1~,
+	kich1=\E[2~,
+	kil1=\E[30~,
+	kmous=\E[M,
+	knp=\E[6~,
+	kpp=\E[5~,
+	rc=\E8,
+	rev=\E[7m,
+	ri=\EM,
+	rmir=\E[4l,
+	rmkx=\E[?1l\E>,
+	rmso=\E[m,
+	rmul=\E[m,
+	rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
+	sc=\E7,
+	sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
+	sgr0=\E[m,
+	smir=\E[4h,
+	smkx=\E[?1h\E=,
+	smso=\E[7m,
+	smul=\E[4m,
+	tbc=\E[3g,
+	u6=\E[%i%d;%dR,
+	u7=\E[6n,
+	u8=\E[?1;2c,
+	u9=\E[c,
+#
+# Customization begins here.
+xterm-xfree86|xterm terminal emulator (XFree86),
+	use=xterm-new,
+#
+# This is the only entry which you should have to customize, since "xterm"
+# is widely used for a variety of incompatible terminal emulations including
+# color_xterm and rxvt.
+xterm|X11 terminal emulator,
+	use=xterm-new,
+#	use=xterm-r6,