drop: nx-X11/config/util/ (not needed at build time).

49 files changed, 1 insertions, 6480 deletions

diff --git a/nx-X11/config/Imakefile b/nx-X11/config/Imakefile
index e0974b712..40fa2a02f 100644
--- a/nx-X11/config/Imakefile
+++ b/nx-X11/config/Imakefile
@@ -7,7 +7,7 @@ XCOMM $XFree86: xc/config/Imakefile,v 1.3 2001/01/17 16:22:29 dawes Exp $
 #define BootstrapCleanSubdirs BOOTSTRAPSUBDIRS="$(BOOTSTRAPSUBDIRS)"
 
 BOOTSTRAPSUBDIRS = imake makedepend
-SUBDIRS = cf $(BOOTSTRAPSUBDIRS) util
+SUBDIRS = cf $(BOOTSTRAPSUBDIRS)
 
 #if (defined(XFree86VersionString) || defined(XorgVersionString)) \
 	&& defined(ProjectRoot) && \
diff --git a/nx-X11/config/util/Imakefile b/nx-X11/config/util/Imakefile
deleted file mode 100644
index 016751d06..000000000
--- a/nx-X11/config/util/Imakefile
+++ /dev/null
@@ -1,168 +0,0 @@
-XCOMM $Xorg: Imakefile,v 1.3 2000/08/17 19:41:52 cpqbld Exp $
-
-
-
-XCOMM $XFree86: xc/config/util/Imakefile,v 3.49 2003/10/21 17:41:45 tsi Exp $
-
-CCMDEP_PROG = ccmakedep
-
-#ifdef ExportListGenSource
-EXPORTLISTGEN = exportlistgen
-#endif
-
-#if defined(Win32Architecture) && !defined(CrossCompiling)
-CMKDIRHIER = mkdirhier.exe
-#endif
-
-GCCMDEP_PROG = gccmakedep
-
-#if HasSymLinks
-#if CrossCompiling
-LNDIR_PROG = HostProgramTargetName(lndir)
-#else
-LNDIR_PROG = ProgramTargetName(lndir)
-#endif
-#endif
-
-#if CrossCompiling
-MAKESTRS_PROG = HostProgramTargetName(makestrs)
-REVPATH_PROG = HostProgramTargetName(revpath)    
-#else
-MAKESTRS_PROG = ProgramTargetName(makestrs)
-REVPATH_PROG = ProgramTargetName(revpath)    
-#endif
-
-#if BuildRman
-RMAN_PROG = HostProgramTargetName(rman)
-#endif
-
-PROGRAMS = $(RMAN_PROG) $(LNDIR_PROG) $(MAKESTRS_PROG) \
-	   $(REVPATH_PROG) $(EXPORTLISTGEN) $(CMKDIRHIER)
-DEPLIBS =
-#ifndef Win32Architecture
-  EXTRA_LIBRARIES =
-#endif
-#ifdef LinuxArchitecture
-  PREPROCESSCMD_MKDEPEND = PreProcessCmd StandardCppDefines $(PROJECT_DEFINES)
-#else
-  PREPROCESSCMD_MKDEPEND = $(PREPROCESSCMD)
-#endif
-
-XCOMM Some compilers generate fatal errors if an -L directory does
-XCOMM not exist.  Since BUILDLIBDIR may not exist yet suppress its use.
-         LDPRELIB =
-        LDPRELIBS =
-#if CrossCompiling
-       LDPOSTLIBS =
-        LDPOSTLIB =
-#endif
-
-all:: xmkmf mergelib $(CCMDEP_PROG) $(GCCMDEP_PROG) $(PROGRAMS)
-
-makedependonly:: $(CCMDEP_PROG) $(GCCMDEP_PROG)
-
-#if HasGcc
-GCCCMD = $(CC)
-#else
-GCCCMD = gcc
-#endif
-
-#if CrossCompiling
-includes:: HostProgramTargetName(makestrs)
-#else
-includes:: ProgramTargetName(makestrs)
-#endif
-
-#ifdef ExportListGenSource
-CppScriptTarget(exportlistgen,ExportListGenSource,-DCXXFILT=$(CXXFILT),)
-InstallNamedProg(exportlistgen,exportlistgen,$(BINDIR))
-#endif
-
-CppScriptTarget(xmkmf,xmkmf.cpp,-DCONFIGDIRSPEC='"'"-I$(CONFIGDIR)"'"',$(ICONFIGFILES))
-CppScriptTarget(ccmakedep,mdepend.cpp,-DPREPROC='"'"$(PREPROCESSCMD_MKDEPEND)"'"',$(ICONFIGFILES))
-CppScriptTarget(mergelib,mergelib.cpp,"-DARCMD=$(AR)" "-DRANLIB=$(RANLIB)",$(ICONFIGFILES))
-CppScriptTarget(gccmakedep,gccmdep.cpp,-DCCCMD='"'"$(GCCCMD)"'"' -DRMCMD='"'"$(RM)"'"' -DLNCMD='"'"$(LN)"'"' -DMVCMD='"'"$(MV)"'"',$(ICONFIGFILES))
-
-#ifndef OpenBSDArchitecture
-#if HasSymLinks
-#if CrossCompiling
-SimpleHostProgramTarget_2(lndir)
-#else
-AllTarget(lndir)
-SimpleProgramTarget_2(lndir)
-#endif
-#endif
-#endif
-
-#if defined(Win32Architecture) && !defined(CrossCompiling)
-AllTarget(ProgramTargetName(mkdirhier))
-SimpleProgramTarget_3(mkdirhier)
-#endif
-
-#if CrossCompiling
-AllTarget(HostProgramTargetName(makestrs))
-SimpleHostProgramTarget_1(makestrs)
-AllTarget(HostProgramTargetName(revpath))
-SimpleHostProgramTarget_4(revpath)
-#else
-AllTarget(ProgramTargetName(makestrs))
-SimpleProgramTarget_1(makestrs)
-AllTarget(ProgramTargetName(revpath))
-SimpleProgramTarget_4(revpath)
-#endif
-
-#if BuildRman
-rmanonly:: $(RMAN_PROG)
-
-VOLLIST="1:2:3:4:5:6:7:8:9:o:l:n:p"
-MANTITLEPRINTF="%s(%s) manual page"
-MANREFPRINTF="%s.%s.html"
-RMANVERSION="3.0.8+X.Org"
-#if CrossCompiling
-AllTarget(HostProgramTargetName(rman))
-SimpleHostProgramTarget_3(rman)
-#else
-AllTarget(ProgramTargetName(rman))
-SimpleProgramTarget_5(rman)
-#endif
-SpecialCObjectRule(rman,NullParameter,-DVOLLIST='$(VOLLIST)' -DMANTITLEPRINTF='$(MANTITLEPRINTF)' -DMANREFPRINTF='$(MANREFPRINTF)' -DPOLYGLOTMANVERSION='$(RMANVERSION)' -DXOrg)
-LinkSourceFile(rman.c,$(TOP)/extras/rman)
-LinkFile(rman.man,$(TOP)/extras/rman/rman.1)
-#endif
-
-InstallManPage(xmkmf,$(MANDIR))
-
-InstallNamedProg(xmkmf,xmkmf,$(BINDIR))
-InstallNamedProg(mkdirhier.sh,mkdirhier,$(BINDIR))
-InstallManPage(mkdirhier,$(MANDIR))
-InstallNamedProg(gccmakedep,gccmakedep,$(BINDIR))
-InstallManPage(gccmakedep,$(MANDIR))
-#if defined(QNX4Architecture) || defined(NTOArchitecture)
-InstallNamedProg(install.sh,install,$(BINDIR))
-#endif
-InstallDriverSDKNamedProg(mkdirhier.sh,mkdirhier.sh,$(DRIVERSDKDIR)/config/util)
-InstallDriverSDKNamedProg(gccmakedep,gccmakedep,$(DRIVERSDKDIR)/config/util)
-InstallNamedProg(mergelib,mergelib,$(BINDIR))
-InstallManPage(mergelib,$(MANDIR))
-InstallNamedProg(makeg.sh,makeg,$(BINDIR))
-InstallManPage(makeg,$(MANDIR))
-InstallNamedProg(cleanlinks.sh,cleanlinks,$(BINDIR))
-InstallManPage(cleanlinks,$(MANDIR))
-#if HasPerl
-InstallNamedProg(mkhtmlindex.pl,mkhtmlindex,$(BINDIR))
-#else
-InstallNamedProg(mkhtmlindex.sh,mkhtmlindex,$(BINDIR))
-#endif
-InstallManPage(mkhtmlindex,$(MANDIR))
-InstallNamedProg(ccmakedep,ccmakedep,$(BINDIR))
-InstallManPage(ccmakedep,$(MANDIR))
-InstallDriverSDKNamedProg(ccmakedep,ccmakedep,$(DRIVERSDKDIR)/config/util)
-#if SystemV || SystemV4
-InstallNamedProg(bsdinst.sh,bsdinst,$(BINDIR))
-InstallDriverSDKNamedProg(bsdinst.sh,bsdinst.sh,$(DRIVERSDKDIR)/config/util)
-#endif
-
-InstallDriverSDKNamedProg(revpath,revpath,$(DRIVERSDKDIR)/config/util)
-#ifdef OS2Architecture
-InstallNamedProg(makedef.cmd,makedef.cmd,$(BINDIR))
-#endif
diff --git a/nx-X11/config/util/aminstall.sh b/nx-X11/config/util/aminstall.sh
deleted file mode 100644
index 19a8a4d5a..000000000
--- a/nx-X11/config/util/aminstall.sh
+++ /dev/null
@@ -1,74 +0,0 @@
-#!/bin/sh
-# $Xorg: aminstall.sh,v 1.3 2000/08/17 19:41:52 cpqbld Exp $
-# aminstall - transfer cross-compiled files to system running Amoeba.
-# Usage: aminstall binary-directory [-s stksz] unix-source amoeba-dest
-
-#
-# Default soap mask for files
-#
-SPMASK=0xFF:2:2
-export SPMASK
-PROG=$0
-USAGE="Usage: $PROG binary-directory unix-source amoeba-dest"
-
-#
-# Argument check
-#
-case $# in
-3|5)	;;
-*)	echo $USAGE >&2
-	exit 1
-	;;
-esac
-
-bindir=$1
-stksz=
-case $2 in
--s)	if [ $# -ne 5 ]
-	then
-	    echo $USAGE >&2
-	    exit 1
-	fi
-	stksz="-s $3"
-	shift
-	shift
-	;;
-esac
-
-unxfile=$2
-dest=$3
-
-#
-# Change /public .... into /super (just for installation)
-#
-stripped=`echo $dest | sed 's:^/public::'`
-if [ X$dest != X$stripped ]; then
-    dest=/super$stripped
-fi
-
-#
-# If the file already exists, then delete it
-#
-INFO=`$bindir/std_info $dest 2>&1`
-case $INFO in
-*"not found"*)	;;
-*failed*)	;;
-*bytes*)	$bindir/del -f $dest
-		;;
-/??????)	echo $PROG: cannot install over directory 1>&2
-		exit
-		;;
-*)		$bindir/del -d $dest
-		;;
-esac
-
-#
-# Transfer the file to Amoeba
-#
-$bindir/../bin.scripts/ainstall $stksz $unxfile $dest > /dev/null 2>&1
-if [ $? -ne 0 ]
-then
-	echo "This is not binary - using tob"
-	$bindir/tob $unxfile $dest
-fi
-
diff --git a/nx-X11/config/util/bsdinst.sh b/nx-X11/config/util/bsdinst.sh
deleted file mode 100644
index fc2673c13..000000000
--- a/nx-X11/config/util/bsdinst.sh
+++ /dev/null
@@ -1,168 +0,0 @@
-#!/bin/sh
-
-# $XFree86: xc/config/util/bsdinst.sh,v 3.3 1996/12/23 05:56:13 dawes Exp $
-#
-# This accepts bsd-style install arguments and makes the appropriate calls
-# to the System V install.
-# $Xorg: bsdinst.sh,v 1.3 2000/08/17 19:41:52 cpqbld Exp $
-
-flags=""
-dst=""
-src=""
-dostrip=""
-owner=""
-group=""
-mode=""
-bargs=$*
-
-while [ x$1 != x ]; do
-    case $1 in 
-	-c) shift
-	    continue;;
-
-	-m) flags="$flags $1 $2 "
-	    mode="$2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) flags="$flags -u $2 "
-	    owner="$2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) flags="$flags $1 $2 "
-	    group="$2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) dostrip="strip"
-	    shift
-	    continue;;
-
-	*)  if [ x$src = x ] 
-	    then
-		src=$1
-	    else
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x$src = x ] 
-then
-	echo "$0:  no input file specified"
-	exit 1
-fi
-
-if [ x$dst = x ] 
-then
-	echo "$0:  no destination specified"
-	exit 1
-fi
-
-if [ -x /usr/ucb/install ]
-then
-	if [ -d "$dst" ]
-	then
-		dst=$dst/`basename "$src"`
-	fi
-	case "$group" in
-	"")
-		bargs="-g other $bargs"
-		;;
-	esac
-	/usr/ucb/install $bargs
-	if [ x$dostrip = xstrip -a -x /usr/bin/mcs ]
-	then
-		/usr/bin/mcs -d $dst
-	fi
-	exit 0
-fi
-	
-case "$mode" in
-"")
-	;;
-*)
-	case "$owner" in
-	"")
-		flags="$flags -u root"
-		;;
-	esac
-	;;
-esac
-
-
-# set up some variable to be used later
-
-rmcmd=""
-srcdir="."
-
-# if the destination isn't a directory we'll need to copy it first
-
-if [ ! -d $dst ]
-then
-	dstbase=`basename $dst`
-	cp $src /tmp/$dstbase
-	rmcmd="rm -f /tmp/$dstbase"
-	src=$dstbase
-	srcdir=/tmp
-	dst="`echo $dst | sed 's,^\(.*\)/.*$,\1,'`"
-	if [ x$dst = x ]
-	then
-		dst="."
-	fi
-fi
-
-
-# If the src file has a directory, copy it to /tmp to make install happy
-
-srcbase=`basename $src`
-
-if [ "$src" != "$srcbase" ] && [ "$src" != "./$srcbase" ] 
-then
-	cp $src /tmp/$srcbase
-	src=$srcbase
-	srcdir=/tmp
-	rmcmd="rm -f /tmp/$srcbase"
-fi
-
-# do the actual install
-
-if [ -f /usr/sbin/install ]
-then
-	installcmd=/usr/sbin/install
-elif [ -f /etc/install ]
-then
-	installcmd=/etc/install
-else
-	installcmd=install
-fi
-
-# This rm is commented out because some people want to be able to
-# install through symbolic links.  Uncomment it if it offends you.
-# rm -f $dst/$srcbase
-(cd $srcdir ; $installcmd -f $dst $flags $src)
-
-if [ x$dostrip = xstrip ]
-then
-	strip $dst/$srcbase
-	if [ -x /usr/bin/mcs ]
-	then
-		/usr/bin/mcs -d $dst/$srcbase
-	fi
-fi
-
-if [ x$mode != x ]
-then
-	chmod $mode $dst/$srcbase
-fi
-
-# and clean up
-
-$rmcmd
-
diff --git a/nx-X11/config/util/buildos2.cmd b/nx-X11/config/util/buildos2.cmd
deleted file mode 100644
index cd5baa24f..000000000
--- a/nx-X11/config/util/buildos2.cmd
+++ /dev/null
@@ -1 +0,0 @@
-make CC="gcc -D__UNIXOS2__" BOOTSTRAPCFLAGS=-Zexe World 2>&1 | tee World.log
diff --git a/nx-X11/config/util/ccmakedep.man b/nx-X11/config/util/ccmakedep.man
deleted file mode 100644
index 20d9e82f8..000000000
--- a/nx-X11/config/util/ccmakedep.man
+++ /dev/null
@@ -1,142 +0,0 @@
-.TH ccmakedep 1 __xorgversion__
-.SH NAME
-ccmakedep \- create dependencies in makefiles using a C compiler
-.SH SYNOPSIS
-.B ccmakedep
-[
-.BI cpp-flags
-] [
-.BI \-w width
-] [
-.BI \-s magic-string
-] [
-.BI \-f makefile
-] [
-.BI \-o object-suffix
-] [
-.B \-v
-] [
-.B \-a
-] [
-.BI \-cc compiler
-] [
-\-\^\-
-.I options
-\-\^\-
-]
-.I sourcefile
-\^.\|.\|.
-.SH DESCRIPTION
-The
-.B ccmakedep
-program calls a C compiler to preprocess each
-.IR sourcefile ,
-and uses the output to construct
-.I makefile
-rules describing their dependencies.
-These rules instruct
-.BR make (1)
-on which object files must be recompiled when a dependency has changed.
-.PP
-By default,
-.B ccmakedep
-places its output in the file named
-.I makefile
-if it exists, otherwise
-.I Makefile.
-An alternate makefile may be specified with the
-.B \-f
-option.
-It first searches the makefile for a line beginning with
-.sp
-\&    # DO NOT DELETE
-.sp
-or one provided with the
-.B \-s
-option, as a delimiter for the dependency output.
-If it finds it, it will delete everything following this up to the end of
-the makefile and put the output after this line.
-If it doesn't find it, the program will append the string to the makefile
-and place the output after that.
-.SH EXAMPLE
-Normally,
-.B ccmakedep
-will be used in a makefile target so that typing 'make depend' will bring
-the dependencies up to date for the makefile.
-For example,
-.nf
-    SRCS\0=\0file1.c\0file2.c\0.\|.\|.
-    CFLAGS\0=\0\-O\0\-DHACK\0\-I\^.\^.\^/foobar\0\-xyz
-    depend:
-            ccmakedep\0\-\^\-\0$(CFLAGS)\0\-\^\-\0$(SRCS)
-.fi
-.SH OPTIONS
-The program will ignore any option that it does not understand, so you may
-use the same arguments that you would for
-.BR cc (1),
-including
-.B \-D
-and
-.B \-U
-options to define and undefine symbols and
-.B \-I
-to set the include path.
-.TP
-.B \-a
-Append the dependencies to the file instead of replacing existing
-dependencies.
-.TP
-.BI \-cc compiler
-Use this compiler to generate dependencies.
-.TP
-.BI \-f makefile
-Filename.
-This allows you to specify an alternate makefile in which
-.B ccmakedep
-can place its output.
-Specifying \(lq\-\(rq as the file name (that is,
-.BR \-f\- )
-sends the output to standard output instead of modifying an existing file.
-.TP
-.BI \-s string
-Starting string delimiter.
-This option permits you to specify a different string for
-.B ccmakedep
-to look for in the makefile.
-The default is \(lq# DO NOT DELETE\(rq.
-.TP
-.BI \-v
-Be verbose: display the C compiler command before running it.
-.TP
-.BI \-\^\- " options " \-\^\-
-If
-.B ccmakedep
-encounters a double hyphen (\-\^\-) in the argument list, then any
-unrecognized arguments following it will be silently ignored.
-A second double hyphen terminates this special treatment.
-In this way,
-.B ccmakedep
-can be made to safely ignore esoteric compiler arguments that might
-normally be found in a CFLAGS
-.B make
-macro (see the
-.B EXAMPLE
-section above).
-.BR \-D ,
-.BR \-I ,
-and
-.B \-U
-options appearing between the pair of double hyphens are still processed
-normally.
-.SH "SEE ALSO"
-.BR cc (1),
-.BR make (1),
-.BR makedepend (1),
-.BR ccmakedep (1).
-.SH AUTHOR
-.B ccmakedep
-was written by the X Consortium.
-.PP
-Colin Watson wrote this manual page, originally for the Debian Project,
-based partly on the manual page for
-.BR makedepend (1).
diff --git a/nx-X11/config/util/checktree.c b/nx-X11/config/util/checktree.c
deleted file mode 100644
index 8bebdc5a3..000000000
--- a/nx-X11/config/util/checktree.c
+++ /dev/null
@@ -1,339 +0,0 @@
-/* $Xorg: checktree.c,v 1.4 2001/02/09 02:03:16 xorgcvs Exp $ */
-
-/*
-
-Copyright (c) 1993, 1998  The Open Group
-
-Permission to use, copy, modify, distribute, and sell this software and its
-documentation for any purpose is hereby granted without fee, provided that
-the above copyright notice appear in all copies and that both that
-copyright notice and this permission notice appear in supporting
-documentation.
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the name of The Open Group shall not be
-used in advertising or otherwise to promote the sale, use or other dealings
-in this Software without prior written authorization from The Open Group.
-*/
-/* $XFree86: xc/config/util/checktree.c,v 1.3 2001/07/29 05:01:10 tsi Exp $ */
-
-#include <X11/Xos.h>
-#include <stdio.h>
-#include <sys/stat.h>
-#include <sys/param.h>
-#include <errno.h>
-
-#ifndef X_NOT_POSIX
-#include <dirent.h>
-#else
-#ifdef SYSV
-#include <dirent.h>
-#else
-#ifdef USG
-#include <dirent.h>
-#else
-#include <sys/dir.h>
-#ifndef dirent
-#define dirent direct
-#endif
-#endif
-#endif
-#endif
-
-#ifdef S_IFLNK
-#define Stat lstat
-#else
-#define Stat stat
-#endif
-
-#define CHARSALLOWED \
-"abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789-_."
-
-#define fmode_bits_minset 0444
-#define fmode_bits_maxset 0777
-#define fmode_bits_write  0222
-#define dmode_bits_minset 0775
-
-int dorcs = 1;			/* check RCS file */
-int do83 = 1;			/* check for 8+3 clash */
-int doro = 1;			/* disallow writable (checked out) files */
-int dodot = 1;			/* disallow .files */
-int dotwiddle = 1;		/* disallow file~ */
-
-int dontcare(fn)
-    char *fn;
-{
-    char *cp;
-
-    if (fn[strlen(fn) - 1] == '~')
-	return 1;
-    cp = strrchr(fn, '.');
-    return cp && (!strcmp(cp + 1, "Z") || !strcmp(cp + 1, "PS"));
-}
-
-checkfile(fullname, fn, fs)
-    char *fullname, *fn;
-    struct stat *fs;
-{
-    char *cp;
-    int maxlen = 12;
-    int len, mode;
-
-    if (dodot && fn[0] == '.') {
-	printf("dot file: %s\n", fullname);
-	return;
-    }
-    for (len = 0, cp = fn; *cp; len++, cp++) {
-	if (!strchr(CHARSALLOWED, *cp)) {
-	    if (dotwiddle || *cp != '~' || cp[1])
-		printf ("bad character: %s\n", fullname);
-	    break;
-	}
-    }
-    if (len > maxlen && !dontcare(fn))
-	printf("too long (%d): %s\n", len, fullname);
-#ifdef S_IFLNK
-    if ((fs->st_mode & S_IFLNK) == S_IFLNK) {
-	printf("symbolic link: %s\n", fullname);
-	return;
-    }
-#endif
-    mode = fs->st_mode & (~S_IFMT);
-    if ((fs->st_mode & S_IFDIR) == S_IFDIR) {
-	maxlen = 14;
-	if ((mode & dmode_bits_minset) != dmode_bits_minset)
-	    printf("directory mode 0%o not minimum 0%o: %s\n",
-		   mode, dmode_bits_minset, fullname);
-    } else if ((fs->st_mode & S_IFREG) != S_IFREG)
-	printf("not a regular file: %s\n", fullname);
-    else {
-	if ((mode & fmode_bits_minset) != fmode_bits_minset)
-	    printf("file mode 0%o not minimum 0%o: %s\n",
-		   fs->st_mode, fmode_bits_minset, fullname);
-	if (fs->st_nlink != 1)
-	    printf("%d links instead of 1: %s\n", fs->st_nlink, fullname);
-	if (doro && (mode & fmode_bits_write) && !dontcare(fn))
-	    printf("writable: %s\n", fullname);
-    }
-    if ((mode & ~fmode_bits_maxset) != 0)
-	printf("mode 0%o outside maximum set 0%o: %s\n",
-	       mode, fmode_bits_maxset, fullname);
-}
-
-void
-checkrcs(dir, p)
-    char *dir;
-    char *p;
-{
-    DIR *df;
-    struct dirent *dp;
-    struct stat fs;
-    int i;
-
-    if (!(df = opendir(dir))) {
-	fprintf(stderr, "cannot open: %s\n", dir);
-	return;
-    }
-    while (dp = readdir(df)) {
-	i = strlen(dp->d_name);
-	if (dp->d_name[i - 1] == 'v' && dp->d_name[i - 2] == ',') {
-	    strcpy(p, dp->d_name);
-	    p[i - 2] = '\0';
-	    if (Stat(dir, &fs) < 0) {
-		strcpy(p, "RCS/");
-		strcat(p, dp->d_name);
-		printf("not used: %s\n", dir);
-	    }
-	}
-    }
-    closedir(df);
-}
-
-int
-Strncmp(cp1, cp2, n)
-    char *cp1, *cp2;
-    int n;
-{
-    char c1, c2;
-
-    for (; --n >= 0 && *cp1 && *cp2; cp1++, cp2++) {
-	if (*cp1 != *cp2) {
-	    c1 = *cp1;
-	    c2 = *cp2;
-	    if (c1 >= 'A' && c1 <= 'Z')
-		c1 += 'a' - 'A';
-	    else if (c1 == '-')
-		c1 = '_';
-	    if (c2 >= 'A' && c2 <= 'Z')
-		c2 += 'a' - 'A';
-	    else if (c2 == '-')
-		c2 = '_';
-	    if (c1 != c2)
-		return (int)c1 - (int)c2;
-	}
-    }
-    if (n < 0)
-	return 0;
-    return (int)*cp1 - (int)*cp2;
-}
-
-int
-fncomp(n1, n2)
-    char **n1, **n2;
-{
-    int i, res;
-    char *cp1, *cp2;
-    char c1, c2;
-
-    i = Strncmp(*n1, *n2, 8);
-    if (!i) {
-	cp1 = strrchr(*n1, '.');
-	cp2 = strrchr(*n2, '.');
-	if (cp1 || cp2) {
-	    if (!cp1)
-		return -1;
-	    if (!cp2)
-		return 1;
-	    i = Strncmp(cp1 + 1, cp2 + 1, 3);
-	}
-    }
-    return i;
-}
-
-void
-checkdir(dir)
-    char *dir;
-{
-    DIR *df;
-    struct dirent *dp;
-    char *p;
-    struct stat fs;
-    char *s, **names;
-    int i, max;
-
-    if (!(df = opendir(dir))) {
-	fprintf(stderr, "cannot open: %s\n", dir);
-	return;
-    }
-    p = dir + strlen(dir);
-    if (p[-1] != '/')
-	*p++ = '/';
-    i = 0;
-    max = 0;
-    names = NULL;
-    while (dp = readdir(df)) {
-	strcpy(p, dp->d_name);
-	if (Stat(dir, &fs) < 0) {
-	    perror(dir);
-	    continue;
-	}
-	if ((fs.st_mode & S_IFDIR) == S_IFDIR) {
-	    if (dp->d_name[0] == '.' &&
-		(dp->d_name[1] == '\0' || (dp->d_name[1] == '.' &&
-					   dp->d_name[2] == '\0')))
-		continue;
-	    if (!strcmp (dp->d_name, "RCS")) {
-		if (dorcs)
-		    checkrcs(dir, p);
-		continue;
-	    }
-	    if (!strcmp (dp->d_name, "SCCS"))
-		continue;
-	    if (!strcmp (dp->d_name, "CVS.adm"))
-		continue;
-	    checkfile(dir, p, &fs);
-	    checkdir(dir);
-	    continue;
-	}
-	checkfile(dir, p, &fs);
-	if (dorcs && !dontcare(dp->d_name)) {
-	    strcpy(p, "RCS/");
-	    strcat(p, dp->d_name);
-	    strcat(p, ",v");
-	    if (Stat(dir, &fs) < 0) {
-		strcpy(p, dp->d_name);
-		printf("no RCS: %s\n", dir);
-	    }
-	}
-	if (do83) {
-	    s = (char *)malloc(strlen(dp->d_name) + 1);
-	    strcpy(s, dp->d_name);
-	    if (i >= max) {
-		max += 25;
-		if (names)
-		    names = (char **)realloc((char *)names,
-					     (max + 1) * sizeof(char *));
-		else
-		    names = (char **)malloc((max + 1) * sizeof(char *));
-	    }
-	    names[i++] = s;
-	}
-    }
-    closedir(df);
-    if (do83) {
-	qsort((char *)names, i, sizeof(char *), fncomp);
-	max = i - 1;
-	*p = '\0';
-	for (i = 0; i < max; i++) {
-	    if (!fncomp(&names[i], &names[i + 1]))
-		printf("8+3 clash: %s%s and %s\n",
-		       dir, names[i], names[i + 1]);
-	    free(names[i]);
-	}
-	if (names) {
-	    free(names[i]);
-	    free((char *)names);
-	}
-    }
-}
-
-main(argc, argv)
-    int argc;
-    char **argv;
-{
-    char buf[2048];
-
-    argc--;
-    argv++;
-    while (argc > 0) {
-	if (!strcmp(*argv, "-rcs")) {
-	    dorcs = 0;
-	    argc--;
-	    argv++;
-	} else if (!strcmp(*argv, "-83")) {
-	    do83 = 0;
-	    argc--;
-	    argv++;
-	} else if (!strcmp(*argv, "-ro")) {
-	    doro = 0;
-	    argc--;
-	    argv++;
-	} else if (!strcmp(*argv, "-dot")) {
-	    dodot = 0;
-	    argc--;
-	    argv++;
-	} else if (!strcmp(*argv, "-twiddle")) {
-	    dotwiddle = 0;
-	    argc--;
-	    argv++;
-	} else
-	    break;
-    }
-    if (!argc) {
-	strcpy(buf, ".");
-	checkdir(buf);
-    } else
-	while (--argc >= 0) {
-	    strcpy(buf, *argv++);
-	    checkdir(buf);
-	}
-}
diff --git a/nx-X11/config/util/chownxterm.c b/nx-X11/config/util/chownxterm.c
deleted file mode 100644
index 868f99c3d..000000000
--- a/nx-X11/config/util/chownxterm.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/* $Xorg: chownxterm.c,v 1.4 2001/02/09 02:03:16 xorgcvs Exp $ */
-/*
-
-Copyright (c) 1993, 1994, 1998  The Open Group
-
-Permission to use, copy, modify, distribute, and sell this software and its
-documentation for any purpose is hereby granted without fee, provided that
-the above copyright notice appear in all copies and that both that
-copyright notice and this permission notice appear in supporting
-documentation.
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the name of The Open Group shall not be
-used in advertising or otherwise to promote the sale, use or other dealings
-in this Software without prior written authorization from The Open Group.
-
-*/
-
-/*
- * chownxterm --- make xterm suid root
- *
- * By Stephen Gildea, December 1993
- */
-
-
-#define XTERM_PATH "/x11/programs/xterm/xterm"
-
-#include <stdio.h>
-#include <errno.h>
-
-char *prog_name;
-
-void help()
-{
-    if (setgid(getgid()) == -1) 
-	exit(1);
-    if (setuid(getuid()) == -1)
-	exit(1);
-    printf("chown-xterm makes %s suid root\n", XTERM_PATH);
-    printf("This is necessary on Ultrix for /dev/tty operation.\n");
-    exit(0);
-}
-
-void print_error(err_string)
-    char *err_string;
-{
-    if (setgid(getgid()) == -1)
-	exit(1);
-    if (setuid(getuid()) == -1)
-	exit(1);
-    fprintf(stderr, "%s: \"%s\"", prog_name, err_string);
-    perror(" failed");
-    exit(1);
-}
-
-main(argc, argv)
-    int argc;
-    char **argv;
-{
-    prog_name = argv[0];
-    if (argc >= 2 && strcmp(argv[1], "-help") == 0) {
-	help();
-    } else {
-	if (chown(XTERM_PATH, 0, -1) != 0)
-	    print_error("chown root " XTERM_PATH);
-	if (chmod(XTERM_PATH, 04555) != 0)
-	    print_error("chmod 4555 " XTERM_PATH);
-    }
-    exit(0);
-}
diff --git a/nx-X11/config/util/cleanlinks.man b/nx-X11/config/util/cleanlinks.man
deleted file mode 100644
index d550ef5a4..000000000
--- a/nx-X11/config/util/cleanlinks.man
+++ /dev/null
@@ -1,29 +0,0 @@
-.TH cleanlinks 1 __vendorversion__
-.SH NAME
-cleanlinks \- remove dangling symbolic links and empty directories
-.SH SYNOPSIS
-.B cleanlinks
-.SH DESCRIPTION
-The
-.I cleanlinks
-program searches the directory tree descended from the current directory for
-symbolic links whose targets do not exist, and removes them.
-It then removes all empty directories in that directory tree.
-.PP
-.I cleanlinks
-is useful for cleaning up a shadow link tree created with
-.BR lndir (1)
-after files have been removed from the real directory.
-.SH DIAGNOSTICS
-A message will be printed upon encountering each dangling symlink and empty
-directory.
-.SH SEE ALSO
-.BR lndir (1).
-.SH AUTHOR
-.PP
-The version of the 
-.I cleanlinks
-included in this X.Org Foundation release was originally written 
-by David Dawes wrote as a part of XFree86.
-.PP
-Colin Watson wrote this manual page, originally for the Debian Project.
diff --git a/nx-X11/config/util/cleanlinks.sh b/nx-X11/config/util/cleanlinks.sh
deleted file mode 100644
index 4e1a8ead9..000000000
--- a/nx-X11/config/util/cleanlinks.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/sh
-#
-# Copyright © 2000, 2003 by The XFree86 Project, Inc
-# 
-# Remove dangling symlinks and empty directories from a shadow link tree
-# (created with lndir).
-#
-# Author: David Dawes <dawes@xfree86.org>
-#
-# $XFree86: xc/config/util/cleanlinks.sh,v 1.2 2003/04/15 03:05:16 dawes Exp $
-
-find . -type l -print |
-(
-	read i
-	while [ X"$i" != X ]; do
-		if [ ! -f "$i" ]; then
-			echo $i is a dangling symlink, removing
-			rm -f "$i"
-		fi
-		read i
-	done
-)
-
-echo Removing empty directories ...
-#find . -type d -depth -print | xargs rmdir > /dev/null 2>&1
-find . -type d -depth -empty -print -exec rmdir {} \;
-exit 0
diff --git a/nx-X11/config/util/crayar.sh b/nx-X11/config/util/crayar.sh
deleted file mode 100644
index 6296de51d..000000000
--- a/nx-X11/config/util/crayar.sh
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh
-lib=$1
-shift
-if cray2; then
-        bld cr $lib `lorder $* | tsort`
-else
-        ar clq $lib $*
-fi
-
diff --git a/nx-X11/config/util/elistgen.hp b/nx-X11/config/util/elistgen.hp
deleted file mode 100644
index fe22e794e..000000000
--- a/nx-X11/config/util/elistgen.hp
+++ /dev/null
@@ -1,202 +0,0 @@
-XCOMM!/bin/sh
-XCOMM $Xorg: elistgen.hp,v 1.3 2000/08/17 19:41:52 cpqbld Exp $
-XCOMM
-XCOMM #########################################################################
-XCOMM Construct shared-library export lists for HP-UX based on standardized
-XCOMM export list description file
-XCOMM
-XCOMM Usage: exportlistgen libfoo.sl libfoo.elist > libfoo.lopt
-XCOMM
-XCOMM	libfoo.sl    => shared library of interest
-XCOMM	libfoo.elist => Meta description of necessary export list.
-XCOMM
-XCOMM The output may then be passed to the linker to reconstruct the
-XCOMM shared library.  For unknown reasons naming only exported symbols
-XCOMM with "+e" does not work for debuggable C++ code, even though "nm"
-XCOMM reports no difference between the resulting libraries.  The linker
-XCOMM complains that "first non-inline virtual function" is not defined for
-XCOMM vtables.  We instead hide internal symbols with "-h" as a work-around.
-XCOMM
-XCOMM Author: Aloke Gupta 5/25/94.
-XCOMM (c) Copyright 1996 Digital Equipment Corporation.
-XCOMM (c) Copyright 1994,1996 Hewlett-Packard Company.
-XCOMM (c) Copyright 1996 International Business Machines Corp.
-XCOMM (c) Copyright 1996 Sun Microsystems, Inc.
-XCOMM (c) Copyright 1996 Novell, Inc.
-XCOMM (c) Copyright 1996 FUJITSU LIMITED.
-XCOMM (c) Copyright 1996 Hitachi.
-XCOMM
-XCOMM #########################################################################
-
-XCOMM Utility programs
-FILTER=CXXFILT			# C++ symbol demangler
-AWK=awk				# awk
-PATH=/usr/bin:/bin:/usr/ucb	# For nm, cat, pr, expand, awk, c++filt
-
-XCOMM Temporary files
-EXPORTLIST=/tmp/elistgen1.$$	# list of export symbols from "libfoo.elist"
-NMLIST=/tmp/elistgen2.$$	# name list from libfoo.sl
-FILTLIST=/tmp/elistgen3.$$	# demangled (C++) version of NMLIST
-
-XCOMM Print useful information at the top of the output
-echo "#" `date`
-echo "# This linker options list was produced by" $0
-echo "# Input export list description taken from:" $2
-echo "# Target library:" $1
-echo "# Target Operating System:" `uname -msrv`
-echo "# "
-
-XCOMM Extract the globally visible symbols from target library
-XCOMM The NMLIST generated here is later used to cross-check the symbols in the
-XCOMM supplied export-list.
-XCOMM
-nm -p $1 | $AWK '
-    / [cCTDB][S ] [^\$]/{print $3}   # Text, Data, BSS, or Secondary symbols
-' > $NMLIST
-
-XCOMM Demangle the global library symbols. This operation is necessary to
-XCOMM convert mangled C++ symbols into their C++ notation.
-${FILTER:-cat} $NMLIST > $FILTLIST
-
-XCOMM
-XCOMM Cleanup the export-list description file.
-XCOMM Note that C++ symbols may have embedded spaces in them.
-XCOMM
-cat $2 | $AWK '
-    BEGIN           {
-	csyms      = 0;		# C   language symbols in libfoo.list
-	cplusplus  = 0;		# C++ language symbols in libfoo.list
-	isyms      = 0;		# C   internal symbols in libfoo.elist
-	icplusplus = 0;		# C++ internal symbols in libfoo.elist
-	implicit = "";		# Handling of implicit symbols.
-    }
-    $1 == "default" {
-	# A default clause suppresses warnings about implicit symbols.
-	if ($2 != "" && $2 != "force" && $2 != "public" && 
-	    $2 != "private" && $2 != "internal") {
-	    print "# Warning: illegal default clause:", $2 | "cat 1>&2";
-	    next;
-	}
-	if (implicit != "")
-	    print "# Warning: multiple default clauses." | "cat 1>&2";
-        implicit = $2;
-	next;
-    }
-    $1 == "force" || $1 == "public" || $1 == "private" {
-	csyms ++;
-	print $1 ";;" $2;
-	next;
-    }
-    $1 == "publicC++" || $1 == "privateC++" {
-	cplusplus ++;
-	string = $2;
-	for (n = 3; n <= NF; n++)
-	    string = string " " $n;
-	print $1 ";;" string;
-	next;
-    }
-    $1 == "internal" {
-	isyms ++;
-	print $1 ";;" $2;
-	next;
-    }
-    $1 == "internalC++" {
-	icplusplus ++;
-	string = $2;
-	for (n = 3; n <= NF; n++)
-	    string = string " " $n;
-	print $1 ";;" string;
-	next;
-    }
-    END  {
-	printf("# Exporting %d C and %d C++ symbols, hiding %d and %d.\n",
-		csyms, cplusplus, isyms, icplusplus) | "cat 1>&2";
-	if (implicit != "") {
-	    print "# Unspecified symbols are " implicit "." | "cat 1>&2";
-	    print "default;;" implicit;
-	}
-    }
-' > $EXPORTLIST
-
-XCOMM Read in the above files and write result to stdout.  The contents
-XCOMM of NMLIST and FILTLIST are used to construct a symbol lookup table.
-XCOMM The contents of EXPORTLIST are converted with the help of this table.
-XCOMM Use ";" as a delimiter in the symbol lookup table.
-XCOMM
-(pr -m -s";" -t -w1024 $NMLIST $FILTLIST| expand -t 1;cat $EXPORTLIST ) | $AWK '
-    BEGIN {
-	FS = ";";
-	implicit = 0;
-    }
-    NF == 2 {
-	# This is "pr" output, i.e., symbol translation table.
-	syms[$2] = $1;
-	next;
-    }
-    NF == 3 && $1 == "default" {
-	# Treatment of unspecified symbols.
-	if ($3 == "internal" || $3 == "internalC++")
-	    implicit = 1;
-	else if ($3 == "private" || $3 == "privateC++")
-	    implicit = 2;
-	else if ($3 == "public" || $3 == "publicC++")
-	    implicit = 3;
-	else # $3 == "force"
-	    implicit = 4;
-        next;
-    }
-    NF == 3 {
-	# Parse our instructions for this symbol.
-	if ($1 == "internal" || $1 == "internalC++")
-	    export = 1;
-	else if ($1 == "private" || $1 == "privateC++")
-	    export = 2;
-	else if ($1 == "public" || $1 == "publicC++")
-	    export = 3;
-	else # $1 == "force"
-	    export = 4;
-
-	# Process it.
-	if (length(syms[$3]) > 0) {
-	    if (donelist[$3])
-		print "# Warning: Duplicate entry for", $3,
-			"in export list" | "cat 1>&2";
-	    if (donelist[$3] < export)
-		donelist[$3] = export;
-	} else {
-	    if (export == 4)
-		donelist[$3] = export;
-	    else
-		print "# Warning:", $3,
-		    "was not in the nm list for this library" | "cat 1>&2";
-	}
-	next;
-    }
-    END {
-	# Force implicit exporting of errno.
-	if (! donelist["errno"])
-	    donelist["errno"] = 4;
-
-	# Complain about some implicit symbols.
-	for (i in syms) {
-	    if (!donelist[i] && (length(syms[i]) > 0)) {
-		# Ignore automatic symbols generated by the C++ compiler.
-		if (implicit == 0 && 
-		    (syms[i] !~ /^__noperfopt__/) &&
-		    (syms[i] !~ /^__ptbl_vec__/) &&
-		    (syms[i] !~ /^__vtbl__[0-9]*_/) &&
-		    (syms[i] !~ /^__cfront_version_[0-9]*_xxxxxxxx$/))
-		    print "# Warning:", syms[i],
-			  "was not in the export list" | "cat 1>&2";
-		donelist[i] = implicit;
-	    }
-	    if ((donelist[i] > 1) && (length(syms[i]) > 0))
-		print "-e", syms[i];
-	}
-    }
-'
-
-XCOMM Clean up temporary files
-rm $EXPORTLIST
-rm $NMLIST
-rm $FILTLIST
diff --git a/nx-X11/config/util/elistgen.ibm b/nx-X11/config/util/elistgen.ibm
deleted file mode 100644
index d36869656..000000000
--- a/nx-X11/config/util/elistgen.ibm
+++ /dev/null
@@ -1,220 +0,0 @@
-XCOMM!/bin/sh
-XCOMM $Xorg: elistgen.ibm,v 1.3 2000/08/17 19:41:52 cpqbld Exp $
-XCOMM
-XCOMM #########################################################################
-XCOMM Construct shared-library export lists for IBM-AIX based on standardized
-XCOMM export list description file
-XCOMM
-XCOMM Usage: elistgen libfoo.sl libfoo.elist > libfoo.lopt
-XCOMM
-XCOMM	libfoo.a     => shared library of interest
-XCOMM	libfoo.elist => Meta description of necessary export list.
-XCOMM
-XCOMM    The output file, "libfoo.lopt" may then be passed to the IBM linker to 
-XCOMM    reconstruct the shared library, libfoo.sl.
-XCOMM
-XCOMM Author: Yanling Qi 10/03/94, Last updated 10/03/94
-XCOMM (c) Copyright 1996 Digital Equipment Corporation.
-XCOMM (c) Copyright 1996 Hewlett-Packard Company.
-XCOMM (c) Copyright 1994,1996 International Business Machines Corp.
-XCOMM (c) Copyright 1996 Sun Microsystems, Inc.
-XCOMM (c) Copyright 1996 Novell, Inc. 
-XCOMM (c) Copyright 1996 FUJITSU LIMITED.
-XCOMM (c) Copyright 1996 Hitachi.
-XCOMM
-XCOMM #########################################################################
-
-#define HASH #
-
-XCOMM Utility programs
-FILTER=CXXFILT			# C++ symbol demangler
-AWK=awk				# awk
-
-XCOMM For dump, cat, pr, expand, awk, c++filt
-PATH=/usr/bin:/bin:/usr/ucb:/usr/lpp/xlC/bin
-
-XCOMM Temporary files
-EXPORTLIST=/tmp/elistgen1.$$	# export directives from "libfoo.list"
-NMLIST=/tmp/elistgen2.$$	# name list from libfoo.sl
-FILTLIST=/tmp/elistgen3.$$	# demangled (C++) version of above
-
-XCOMM Print useful information
-echo "*" `date`
-echo "* This linker options list was produced by" $0
-echo "* Input export list description taken from:" $2
-echo "* Target library:" $1
-echo "* Target Operating System:" `uname`
-echo "*"
-
-XCOMM Extract the globally visible symbols from target library
-dump -g $1 | $AWK  '$1 ~ /[0-9][0-9]/ && $2 !~ /^[\.]/ {print $2}' > $NMLIST
-
-XCOMM Demangle the global library symbols
-${FILTER:-cat} $NMLIST > $FILTLIST
-
-XCOMM
-XCOMM Clean up the export-list description file.
-XCOMM Note that C++ symbols may have embedded spaces in them.
-XCOMM
-$AWK '
-    BEGIN {
-	csyms     = 0;		# C   language symbols in libfoo.list
-	cplusplus = 0;		# C++ language symbols in libfoo.list
-	isyms     = 0;		# C   internal symbols in libfoo.list
-	iplusplus = 0;		# C++ internal symbols in libfoo.list
-	count     = 0;		# Running count of symbols
-	implicit  = "";		# Handling of implicit symbols.
-    }
-    $1 == "default" {
-	HASH A default clause suppresses warnings about implicit symbols.
-	if ($2 != "" && $2 != "force" && $2 != "public" && 
-	    $2 != "private" && $2 != "internal") {
-	    print "# Warning: illegal default clause:", $2 | "cat 1>&2";
-	    next;
-	}
-	if (implicit != "")
-	    print "# Warning: multiple default clauses." | "cat 1>&2";
-        implicit = $2;
-	next;
-    }
-    $1 == "force" || $1 == "public" || $1 == "private" {
-	csyms ++;
-	symbol[count++] = $1 ";;" $2;
-	next;
-    }
-    $1 == "publicC++" || $1 == "privateC++" {
-	HASH forceC++ is unsupported because we only know how to demangle,
-	HASH not how to mangle symbols, and the final ld input file must
-	HASH be mangled.
-	cplusplus ++;
-	string = $2;
-	for (n = 3; n <= NF; n++)
-	    string = string " " $n;
-	symbol[count++] = $1 ";;" string;
-	next;
-    }
-    $1 == "internal" {
-	isyms ++;
-	symbol[count++] = $1 ";;" $2;
-	next;
-    }
-    $1 == "internalC++" {
-	iplusplus ++;
-	string = ";;" $2;
-	for (n = 3; n <= NF; n++)
-	    string = string " " $n;
-	symbol[count++] = $1 ";;" string;
-	next;
-    }
-    $1 == "#line" || $1 == "#" {
-	HASH cpp will have removed comments, but may have added other stuff.
-	next;
-    }
-    NF > 0 {
-	print "# Warning: unrecognized directive:", $0 | "cat 1>&2";
-	next;
-    }
-    END  {
-	printf("# Exporting %d C and %d C++ symbols, hiding %d and %d.\n",
-	       csyms, cplusplus, isyms, iplusplus) | "cat 1>&2";
-	if (implicit != "") {
-	    print "# Unspecified symbols are " implicit "." | "cat 1>&2";
-	    print "default;;" implicit;
-	}
-	for (i in symbol)
-	    print symbol[i];
-    }
-' $2 > $EXPORTLIST
-
-XCOMM
-XCOMM Read in the above files and write result to stdout.  Use the
-XCOMM delimiter ";" to identify the entries in the symbol lookup table.
-XCOMM
-(pr -m -s";" -t -w1024 $NMLIST $FILTLIST | expand -t 1; cat $EXPORTLIST) | $AWK '
-    BEGIN {
-	FS = ";";
-	implicit = 0;
-    }
-    NF == 2 {
-	HASH This is "pr" output, i.e., symbol translation table
-	r2=$2
-	gsub(/ /,"",r2);       # Remove spaces because c++filt is unpredictable
-	syms[r2] = $1;
-	r1=$1;
-	gsub(/ /,"",r1);
-	mangled[r1] = 1;       # Save the mangling because the export lists
-			       HASH sometimes use it instead of a prototype.
-	next;
-    }
-    NF == 3 && $1 == "default" {
-	HASH Treatment of unspecified symbols.
-	if ($3 == "internal")
-	    implicit = 1;
-	else if ($3 == "private" || $3 == "privateC++")
-	    implicit = 2;
-	else if ($3 == "public" || $3 == "publicC++")
-	    implicit = 3;
-	else # $3 == "force"
-	    implicit = 4;
-        next;
-    }
-    NF == 3 {
-	HASH Generate canonical demangled form as an alternate symbol.
-	alt=$3;
-	gsub(/ \.\.\./,",...",alt); # change " ..." to ",..." to match c++filt
-	gsub(/ /,"",alt);	    # remove all spaces
-	gsub(/\(void\)/,"()",alt);  # change "(void)" to "()" to match c++filt
-
-	HASH Parse our instructions for this symbol.
-	if ($1 == "internal" || $1 == "internalC++")
-	    export = 1;
-	else if ($1 == "private" || $1 == "privateC++")
-	    export = 2;
-	else if ($1 == "public" || $1 == "publicC++")
-	    export = 3;
-	else # $1 == "force"
-	    export = 4;
-
-	HASH Process it.
-	if ((length(syms[alt]) > 0) || mangled[alt]) {
-	    HASH This symbol is present in the library.
-	    if (donelist[alt])
-		print "# Warning: Duplicate entry for", $3, 
-		    "in export list" | "cat 1>&2";
-	    if (donelist[alt] < export) {
-		if (export > 1)
-		    print syms[alt];
-		donelist[alt] = export;
-	    }
-	} else { 
-	    HASH Print forced-export symbols without complaining.
-	    if (export == 4) {
-		print alt;
-		donelist[alt] = export;
-	    } else {
-		print "# Warning:", $3,
-		    "was not in the nm list for this library" | "cat 1>&2";
-	    }
-	}
-
-	next;
-    }
-    END { 
-	HASH Process implicit symbols.
-	for (i in syms) {
-	    if ((! donelist[i]) && (length(syms[i]) > 0)) {
-		HASH Do not complain about C++ virtual function tables.
-		if (implicit == 0 && syms[i] !~ /^__vft[0-9]*_/)
-		    print "# Warning:", syms[i],
-			"was not in the export list" | "cat 1>&2";
-		if (implicit > 1)
-		    print syms[i];
-	    }
-	}
-    }
-'
-
-XCOMM Clean up temporary files
-rm $EXPORTLIST
-rm $NMLIST
-rm $FILTLIST
diff --git a/nx-X11/config/util/elistgen.sun b/nx-X11/config/util/elistgen.sun
deleted file mode 100644
index f9af50ad1..000000000
--- a/nx-X11/config/util/elistgen.sun
+++ /dev/null
@@ -1,267 +0,0 @@
-XCOMM!/bin/sh -f
-XCOMM $Xorg: elistgen.sun,v 1.3 2000/08/17 19:41:52 cpqbld Exp $
-XCOMM
-XCOMM ########################################################################
-XCOMM Construct shared-library scoping mapfile for Solaris based on standardized
-XCOMM export list description file
-XCOMM
-XCOMM Usage: exportlistgen libfoo.so libfoo.elist > mapfile.scope
-XCOMM
-XCOMM	libfoo.so    => shared library of interest
-XCOMM	libfoo.elist => Meta description of necessary export list.
-XCOMM
-XCOMM    The output file, "mapfile.scope" may then be passed to the Solaris 
-XCOMM    linker to reconstruct the shared library, libfoo.so.
-XCOMM
-XCOMM ########################################################################
-XCOMM
-XCOMM $XFree86: xc/config/util/elistgen.sun,v 1.7 2001/01/17 16:39:01 dawes Exp $
-
-XCOMM Utility programs
-FILTER=CXXFILT			# C++ symbol demangler
-AWK=nawk			# Awk
-
-XCOMM For nm, cat, pr, sed, awk, c++filt
-PATH=/usr/bin:/bin:/usr/ccs/bin:/usr/ucb:$PATH
-
-XCOMM Try to detect broken versions of c++filt.
-if [ `echo _okay | ${FILTER:-cat}` != "_okay" ]; then
-    if [ -x /opt/SUNWspro/bin/c++filt ]; then
-	echo "# Your $FILTER is broken -- using /opt/SUNWspro/bin/c++filt."
-	FILTER=/opt/SUNWspro/bin/c++filt
-    else
-	echo "# ERROR: no working $FILTER available."
-	exit 1
-    fi;
-fi;
-
-XCOMM Temporary files
-EXPORTLIST=/tmp/elistgen1.$$	# export directives from "libfoo.list"
-NMLIST=/tmp/elistgen2.$$	# name list from libfoo.sl
-FILTLIST=/tmp/elistgen3.$$	# demangled (C++) version of above
-
-XCOMM Print useful information at the top of the output
-echo "#" `date`
-echo "# This scoping mapfile was produced by" $0
-echo "# Export list description taken from:" $2
-echo "# Target library:" $1
-echo "# Target Operating System:" `uname -msrv`
-echo "# "
-
-XCOMM Extract the globally visible symbols from target library
-XCOMM The NMLIST generated here is later used to cross-check the symbols in the
-XCOMM nm stopped working on Solaris 2.5, use dump instead.
-nm -p $1 | $AWK '/ [ TDBS] /{print $3}' > $NMLIST
-XCOMM /usr/ccs/bin/dump -t -v $1 | $AWK '/(FUNC|OBJT).(GLOB|WEAK)/{print $8}' > $NMLIST
-
-XCOMM Extract the globally visible symbols from target library
-XCOMM The NMLIST generated here is later used to cross-check the symbols in the
-${FILTER:-cat} < $NMLIST > $FILTLIST
-
-XCOMM Clean up the export-list description file.  Sort the directives.
-$AWK '
-    BEGIN {
-	csyms     = 0;	# C   public symbols in libfoo.list
-	cplusplus = 0;	# C++ public symbols in libfoo.list
-	isyms     = 0;	# C   internal symbols in libfoo.list
-	iplusplus = 0;	# C++ internal symbols in libfoo.list
-	implicit  = "";	# Handling of implicit symbols
-    }
-    $1 == "default" {
-	# A default clause suppresses warnings about implicit symbols.
-	if ($2 != "" && $2 != "force" && $2 != "public" && $2 != "private" && $2 != "internal") {
-	    print "# Warning: illegal default clause:", $2 | "cat 1>&2";
-	    next;
-	}
-	if (implicit != "")
-	    print "# Warning: multiple default clauses." | "cat 1>&2";
-	implicit = $2;
-	next;
-    }
-    $1 == "force" {
-	csyms ++;
-	print $1 ";;" $2;
-	next;
-    }
-    $1 == "public" {
-	csyms ++;
-	print $1 ";;" $2;
-	next;
-    }
-    $1 == "publicC++" {
-	cplusplus ++;
-	string = $2;
-	for (n = 3; n <= NF; n++)
-	    string = string " " $n;
-	print $1 ";;" string;
-	next;
-    }
-    $1 == "private" {
-	csyms ++;
-	print $1 ";;" $2;
-	next;
-    }
-    $1 == "privateC++" {
-	cplusplus ++;
-	string = $2;
-	for (n = 3; n <= NF; n++)
-	    string = string " " $n;
-	print $1 ";;" string;
-	next;
-    }
-    $1 == "internal" {
-	isyms ++;
-	print $1 ";;" $2;
-	next;
-    }
-    $1 == "internalC++" {
-	iplusplus ++;
-	string = $2;
-	for (n = 3; n <= NF; n++)
-	    string = string " " $n;
-	print $1 ";;" string;
-	next;
-    }
-    $1 == "#line" || $1 == "#" {
-	# cpp will have removed comments, but may have added other stuff.
-	next;
-    }
-    NF > 0 {
-	print "# Warning: unrecognized directive:", $0 | "cat 1>&2";
-	next;
-    }
-    END {
-	printf("# Exporting %d C and %d C++ symbols, hiding %d and %d.\n", csyms, cplusplus, isyms, iplusplus) | "cat 1>&2";
-	if (implicit != "") {
-	    print "# Unspecified symbols are " implicit "." | "cat 1>&2";
-	    print "default;;" implicit;
-	}
-    }
-' $2 1>$EXPORTLIST
-
-
-XCOMM Read in the above files and write result to stdout.  The contents
-XCOMM of NMLIST and FILTLIST are used to construct a symbol lookup table.
-XCOMM The contents of EXPORTLIST are converted with the help of this table.
-XCOMM Use ";" as a delimiter in the symbol lookup table.
-(pr -m -s";" -t -w1024 $NMLIST $FILTLIST | sed 's/     / /g'; cat $EXPORTLIST) | $AWK '
-    BEGIN {
-	FS = ";";
-	implicit = 0;
-    }
-    NF == 2 {
-	# This is "pr" output, i.e., symbol translation table
-	r2=$2;
-	gsub(/static /,"",r2); # remove keyword "static" as above
-	gsub(/ /,"",r2);       # Remove spaces because c++filt is unpredictable
-	syms[r2] = $1;
-	r1=$1;
-	gsub(/ /,"",r1);
-	mangled[r1] = 1;       # Save the mangling because the export lists
-	                       # sometimes use it instead of a prototype.
-	next;
-    }
-    NF == 3 && $1 == "default" {
-	# Treatment of unspecified symbols.
-	if ($3 == "internal" || $3 == "internalC++")
-	    implicit = 1;
-	else if ($3 == "private" || $3 == "privateC++")
-	    implicit = 2;
-	else if ($3 == "public" || $3 == "publicC++")
-	    implicit = 3;
-	else # $3 == "force"
-	    implicit = 4;
-	next;
-    }
-    NF == 3 {
-	# Generate canonical demangled form as an alternate symbol.
-	alt=$3;
-	gsub(/ \.\.\./,",...",alt);  # change " ..." to ",..." to match c++filt
-	gsub(/ /,"",alt);            # remove all spaces
-	
-	# An export directive.  Parse our instructions for this symbol.
-	if ($1 == "internal" || $1 == "internalC++")
-	    export = 1;
-	else if ($3 == "private" || $3 == "privateC++")
-	    export = 2;
-	else if ($3 == "public" || $3 == "publicC++")
-	    export = 3;
-	else # $3 == "force"
-	    export = 4;
-
-	# Process it.
-	if ((length(syms[alt]) > 0) || mangled[alt]) {
-	    # This symbol is present in the library.
-	    if (donelist[alt])
-	        print "# Warning: Duplicate entry for", $3, 
-	            "in export list" | "cat 1>&2";
-	    if (donelist[alt] < export) {
-	        donelist[alt] = export;
-	    }
-	} else { 
-	    # Print forced-export symbols without complaining.
-	    if (export == 4) {
-	        donelist[alt] = export;
-	    } else {
-	        print "# Warning:", $3,
-	            "was not in the nm list for this library" | "cat 1>&2";
-	    }
-	}
-	
-	next;
-    }
-    END { 
-	# Ignore magic linker symbols.
-	if (implicit == 0) {
-	    if (!donelist["_DYNAMIC"])
-		donelist["_DYNAMIC"] = 1;
-	    if (!donelist["_GLOBAL_OFFSET_TABLE_"])
-		donelist["_GLOBAL_OFFSET_TABLE_"] = 1;
-	    if (!donelist["_PROCEDURE_LINKAGE_TABLE_"])
-		donelist["_PROCEDURE_LINKAGE_TABLE_"] = 1;
-	    if (!donelist["_edata"])
-		donelist["_edata"] = 1;
-	    if (!donelist["_end"])
-		donelist["_end"] = 1;
-	    if (!donelist["_etext"])
-		donelist["_etext"] = 1;
-        }
-
-	# Process implicit symbols.
-	for (i in syms) {
-	    if (donelist[i] == 0 && length(syms[i]) > 0) {
-		if (implicit == 0) {
-		    # Ignore magic symbols introduced by the C++ compiler.
-		    if ((syms[i] !~ /^__vtbl__[0-9]*_/) && (syms[i] !~ /^__ptbl_vec__/))
-			print "# Warning:", syms[i], "was not in the export list" | "cat 1>&2";
-		} else {
-		    donelist[i] = implicit;
-		}
-	    }
-	}
-
-	# Generate the linker file.
-	print "";
-	print "SUNW.1.1 {";
-	print "    global:";
-	for (i in syms)
-	    if (donelist[i] >= 2 && length(syms[i]) > 0)
-		print "        " syms[i] ";";
-	print "    local:";
-	print "        *;";
-	print "};";
-
-	print "";
-	print "SUNW_private.1.1 {";
-	print "    global:";
-	for (i in syms)
-	    if (donelist[i] == 1 && length(syms[i]) > 0)
-		print "        " syms[i] ";";
-	print "} SUNW.1.1;"
-    }
-'
-
-XCOMM Clean up temporary files
-rm $EXPORTLIST
-rm $NMLIST
-rm $FILTLIST
diff --git a/nx-X11/config/util/elistgen.usl b/nx-X11/config/util/elistgen.usl
deleted file mode 100644
index f17bcdb22..000000000
--- a/nx-X11/config/util/elistgen.usl
+++ /dev/null
@@ -1,221 +0,0 @@
-XCOMM!/bin/sh
-XCOMM $Xorg: elistgen.usl,v 1.3 2000/08/17 19:41:52 cpqbld Exp $
-XCOMM
-XCOMM #########################################################################
-XCOMM Construct shared-library export lists for Novell based on standardized
-XCOMM export list description file
-XCOMM
-XCOMM Usage: exportlistgen libFoo.so libFoo.elist > libFoo.lopt
-XCOMM
-XCOMM	libFoo.so    => shared library of interest
-XCOMM	libFoo.elist => Meta description of necessary export list.
-XCOMM
-XCOMM    The output file, "libFoo.lopt" may then be passed to the linker to 
-XCOMM    reconstruct the shared library.
-XCOMM
-XCOMM (c) Copyright 1996 Digital Equipment Corporation.
-XCOMM (c) Copyright 1996 Hewlett-Packard Company.
-XCOMM (c) Copyright 1996 International Business Machines Corp.
-XCOMM (c) Copyright 1996 Sun Microsystems, Inc.
-XCOMM (c) Copyright 1996 Novell, Inc. 
-XCOMM (c) Copyright 1996 FUJITSU LIMITED.
-XCOMM (c) Copyright 1996 Hitachi.
-XCOMM
-XCOMM #########################################################################
-XCOMM
-XCOMM $XFree86$
-
-XCOMM Utility programs
-FILTER=CXXFILT			# C++ symbol demangler
-AWK=awk				# awk
-
-XCOMM For nm, cat, pr, sed, awk, c++filt
-PATH=/usr/bin:/bin:/usr/ucb:/usr/ccs/bin
-
-XCOMM Temporary files
-EXPORTLIST=/tmp/elistgen1.$$	# list of export symbols from "libfoo.elist"
-NMLIST=/tmp/elistgen2.$$	# name list from libfoo.sl
-FILTLIST=/tmp/elistgen3.$$	# demangled (C++) version of NMLIST
-
-XCOMM Print useful information at the top of the output
-echo "#" `date`
-echo "# This linker options list was produced by" $0
-echo "# Input export list description taken from:" $2
-echo "# Target library:" $1
-echo "# Target Operating System:" `uname -msrv`
-echo "# "
-
-XCOMM Extract the globally visible symbols from target library.
-XCOMM The NMLIST generated here is later used to cross-check the symbols in the
-XCOMM supplied export-list.
-nm -p $1 | $AWK '
-    / [TD] [^\$]/{print $3}   # Text, Data, BSS, or Secondary symbols
-' > $NMLIST
-
-XCOMM Demangle the global library symbols. This operation is necessary to convert
-XCOMM mangled C++ symbols into their C++ notation.
-${FILTER:-cat} $NMLIST > $FILTLIST
-
-XCOMM Clean up the export-list description file.
-XCOMM Note that C++ symbols may have embedded spaces in them.
-cat $2 | $AWK '
-    BEGIN           {
-	csyms     = 0;		# C   language symbols in libfoo.list
-	cplusplus = 0;		# C++ language symbols in libfoo.list
-	isyms     = 0;		# C   internal symbols in libfoo.elist
-	iplusplus = 0;		# C++ internal symbols in libfoo.elist
-	implicit  = "";		# Handling of implicit symbols
-    }
-    $1 == "default" {
-	# A default clause suppresses warnings about implicit symbols.
-	if ($2 != "" && $2 != "force" && $2 != "public" && 
-	    $2 != "private" && $2 != "internal") {
-	    print "# Warning: illegal default clause:", $2 | "cat 1>&2";
-	    next;
-	}
-	if (implicit != "")
-	    print "# Warning: multiple default clauses." | "cat 1>&2";
-        implicit = $2;
-	next;
-    }
-    $1 == "force" || $1 == "public" || $1 == "private" {
-	csyms ++;
-	print $1 ";;" $2;
-	next;
-    }
-    $1 == "publicC++" || $1 == "privateC++" {
-	cplusplus ++;
-	string = $2;
-	for (n = 3; n <= NF; n++) {
-	    string = string " " $n;
-	}
-	print $1 ";;" string;
-	next;
-    }
-    $1 == "internal" {
-	isyms ++;
-	print $1 ";;" $2;
-	next;
-    }
-    $1 == "internalC++" {
-	iplusplus ++;
-	string = $2;
-	for (n = 3; n <= NF; n++) {
-	    string = string " " $n;
-	}
-	print $1 ";;" string;
-	next;
-    }
-    $1 == "#line" || $1 == "#" {
-	# cpp will have removed comments, but may have added other stuff.
-	next;
-    }
-    NF > 0 {
-	print "# Warning: unrecognized directive:", $0 | "cat 1>&2";
-	next;
-    }
-    END  {
-	printf("# Exporting %d C and %d C++ symbols, hiding %d and %d.\n",
-			    csyms, cplusplus, isyms, iplusplus) | "cat 1>&2";
-	if (implicit != "") {
-	    print "# Unspecified symbols are " implicit "." | "cat 1>&2";
-	    print "default;;" implicit;
-	}
-    }
-' > $EXPORTLIST
-
-XCOMM Read in the above files and write result to stdout.  The contents
-XCOMM of NMLIST and FILTLIST are used to construct a symbol lookup table.
-XCOMM The contents of EXPORTLIST are converted with the help of this table.
-XCOMM Use ";" as a delimiter in the symbol lookup table.
-(pr -m -s";" -t -w1024 $NMLIST $FILTLIST | sed 's/      / /g'; cat $EXPORTLIST) | $AWK '
-    BEGIN {
-	FS = ";";
-	implicit = 0;
-    }
-    NF == 2 {
-	# This is "pr" output, i.e., symbol translation table
-	syms[$2] = $1;
-	next;
-    }
-    NF == 3 && $1 == "default" {
-	# Treatment of unspecified symbols.
-	if ($3 == "internal")
-	    implicit = 1;
-	else if ($3 == "private" || $3 == "privateC++")
-	    implicit = 2;
-	else if ($3 == "public" || $3 == "publicC++")
-	    implicit = 3;
-	else # $3 == "force"
-	    implicit = 4;
-        next;
-    }
-    NF == 3 {
-	# Parse our instructions for this symbol.
-	if ($1 == "internal" || $1 == "internalC++")
-	    export = 1;
-	else if ($1 == "private" || $1 == "privateC++")
-	    export = 2;
-	else if ($1 == "public" || $1 == "publicC++")
-	    export = 3;
-	else # $1 == "force"
-	    export = 4;
-
-	# Process it.
-	if (length(syms[$3]) > 0) {
-	    # This symbol is present in the library.
-	    if (donelist[$3])
-		print "# Warning: Duplicate entry for", $3, 
-		    "in export list" | "cat 1>&2";
-	    if (donelist[$3] < export) {
-		if (export > 1)
-		    print syms[$3];
-		donelist[$3] = export;
-	    }
-	} else { 
-	    # Do not complain about unknown forced-export symbols.
-	    if (export == 4) {
-		print $3;
-		donelist[$3] = export;
-	    } else
-		print "# Warning:", $3,
-		    "was not in the nm list for this library" | "cat 1>&2";
-	}
-
-	next;
-    }
-    END { 
-	# Ignore built-in linker symbols.
-	if (implicit == 0) {
-	    if (!donelist["_DYNAMIC"])
-		donelist["_DYNAMIC"] = 1;
-	    if (!donelist["_GLOBAL_OFFSET_TABLE_"])
-		donelist["_GLOBAL_OFFSET_TABLE_"] = 1;
-	    if (!donelist["_edata"])
-		donelist["_edata"] = 1;
-	    if (!donelist["_end"])
-		donelist["_end"] = 1;
-	    if (!donelist["_etext"])
-		donelist["_etext"] = 1;
-	}
-
-	# Process implicit symbols.
-	for (i in syms) {
-	    if (!donelist[i] && (length(syms[i]) > 0)) {
-		# Ignore C++ compiler symbols
-		if (implicit == 0 &&
-		    (syms[i] !~ /^__vtbl__[0-9]*_/) &&
-		    (syms[i] !~ /^__cpp_unixware_[0-9]*$/))
-		    print "# Warning:", syms[i],
-		          "was not in the export list" | "cat 1>&2";
-	        if (implicit > 1)
-		    print syms[i];
-	    }
-	}
-    }
-'
-
-XCOMM Clean up temporary files
-rm $EXPORTLIST
-rm $NMLIST
-rm $FILTLIST
diff --git a/nx-X11/config/util/gccmakedep.man b/nx-X11/config/util/gccmakedep.man
deleted file mode 100644
index 5a97a3ebb..000000000
--- a/nx-X11/config/util/gccmakedep.man
+++ /dev/null
@@ -1,126 +0,0 @@
-.TH gccmakedep 1 __vendorversion__
-.SH NAME
-gccmakedep \- create dependencies in makefiles using 'gcc -M'
-.SH SYNOPSIS
-.B gccmakedep
-[
-.BI \-s separator
-] [
-.BI \-f makefile
-] [
-.BI \-a
-] [
-\-\^\-
-.I options
-\-\^\-
-]
-.I sourcefile
-\&.\|.\|.
-.SH DESCRIPTION
-The
-.B gccmakedep
-program calls 'gcc -M' to output
-.I makefile
-rules describing the dependencies of each
-.IR sourcefile ,
-so that
-.BR make (1)
-knows which object files must be recompiled when a dependency has changed.
-.PP
-By default,
-.B gccmakedep
-places its output in the file named
-.I makefile
-if it exists, otherwise
-.I Makefile.
-An alternate makefile may be specified with the
-.B \-f
-option.
-It first searches the makefile for a line beginning with
-.sp
-\&    # DO NOT DELETE
-.sp
-or one provided with the
-.B \-s
-option, as a delimiter for the dependency output.
-If it finds it, it will delete everything following this up to the end of
-the makefile and put the output after this line.
-If it doesn't find it, the program will append the string to the makefile
-and place the output after that.
-.SH EXAMPLE
-Normally,
-.B gccmakedep
-will be used in a makefile target so that typing 'make depend' will bring
-the dependencies up to date for the makefile.
-For example,
-.nf
-    SRCS\0=\0file1.c\0file2.c\0.\|.\|.
-    CFLAGS\0=\0\-O\0\-DHACK\0\-I\^.\^.\^/foobar\0\-xyz
-    depend:
-            gccmakedep\0\-\^\-\0$(CFLAGS)\0\-\^\-\0$(SRCS)
-.fi
-.SH OPTIONS
-The program will ignore any option that it does not understand, so you may
-use the same arguments that you would for
-.BR gcc (1),
-including
-.B \-D
-and
-.B \-U
-options to define and undefine symbols and
-.B \-I
-to set the include path.
-.TP
-.B \-a
-Append the dependencies to the file instead of replacing existing
-dependencies.
-.TP
-.BI \-f makefile
-Filename.
-This allows you to specify an alternate makefile in which
-.B gccmakedep
-can place its output.
-Specifying \(lq\-\(rq as the file name (that is,
-.BR \-f\- )
-sends the output to standard output instead of modifying an existing file.
-.TP
-.BI \-s string
-Starting string delimiter.
-This option permits you to specify a different string for
-.B gccmakedep
-to look for in the makefile.
-The default is \(lq# DO NOT DELETE\(rq.
-.TP
-.BI \-\^\- " options " \-\^\-
-If
-.B gccmakedep
-encounters a double hyphen (\-\^\-) in the argument list, then any
-unrecognized arguments following it will be silently ignored.
-A second double hyphen terminates this special treatment.
-In this way,
-.B gccmakedep
-can be made to safely ignore esoteric compiler arguments that might
-normally be found in a CFLAGS
-.B make
-macro (see the
-.B EXAMPLE
-section above).
-.BR \-D ,
-.BR \-I ,
-and
-.B \-U
-options appearing between the pair of double hyphens are still processed
-normally.
-.SH "SEE ALSO"
-.BR gcc (1),
-.BR make (1),
-.BR makedepend (1).
-.SH AUTHOR
-The version of the 
-.B gccmakedep
-included in this X.Org Foundation release was originally 
-written by the XFree86 Project based on code supplied by Hongjiu Lu.
-.PP
-Colin Watson wrote this manual page, originally for the Debian Project,
-based partly on the manual page for
-.BR makedepend (1).
diff --git a/nx-X11/config/util/gccmdep.cpp b/nx-X11/config/util/gccmdep.cpp
deleted file mode 100644
index ff4b12a3d..000000000
--- a/nx-X11/config/util/gccmdep.cpp
+++ /dev/null
@@ -1,126 +0,0 @@
-XCOMM!/bin/sh
-
-XCOMM
-XCOMM makedepend which uses 'gcc -M'
-XCOMM
-XCOMM $XFree86: xc/config/util/gccmdep.cpp,v 3.10tsi Exp $
-XCOMM
-XCOMM Based on mdepend.cpp and code supplied by Hongjiu Lu <hjl@nynexst.com>
-XCOMM
-
-TMP=mdep$$.tmp
-CC=CCCMD
-RM=RMCMD
-LN=LNCMD
-MV=MVCMD
-
-${RM} ${TMP}
-
-trap "${RM} ${TMP}*; exit 1" 1 2 15
-trap "${RM} ${TMP}*; exit 0" 1 2 13
-
-files=
-makefile=
-endmarker=
-magic_string='# DO NOT DELETE'
-append=n
-args=
-
-while [ $# != 0 ]; do
-    if [ "$endmarker"x != x -a "$endmarker" = "$1" ]; then
-	endmarker=
-    else
-	case "$1" in
-	    -D*|-I*|-U*)
-		args="$args '$1'"
-		;;
-	    -g*|-O*)
-		;;
-	    *)
-		if [ "$endmarker"x = x ]; then
-		    case $1 in
-XCOMM ignore these flags
-			-w|-o|-cc)
-			    shift
-			    ;;
-			-v)
-			    ;;
-			-s)
-			    magic_string="$2"
-			    shift
-			    ;;
-			-f*)
-			    if [ "$1" = "-f-" ]; then
-				makefile="-"
-			    elif [ "$1" = "-f" ]; then
-				makefile="$2"
-				shift
-			    else
-				echo "$1" | sed 's/^\-f//' >${TMP}arg
-				makefile="`cat ${TMP}arg`"
-				rm -f ${TMP}arg
-			    fi
-			    ;;
-			--*)
-			    endmarker=`echo $1 | sed 's/^\-\-//'`
-			    if [ "$endmarker"x = x ]; then
-				endmarker="--"
-			    fi
-			    ;;
-			-a)
-			    append=y
-			    ;;
-			-*)
-			    echo "Unknown option '$1' ignored" 1>&2
-			    ;;
-			*)
-			    files="$files $1"
-			    ;;
-		    esac
-		fi
-		;;
-	esac
-    fi
-    shift
-done
-
-if [ x"$files" = x ]; then
-XCOMM Nothing to do
-    exit 0
-fi
-
-case "$makefile" in
-    '')
-	if [ -r makefile ]; then
-	    makefile=makefile
-	elif [ -r Makefile ]; then
-	    makefile=Makefile
-	else
-	    echo 'no makefile or Makefile found' 1>&2
-	    exit 1
-	fi
-	;;
-esac
-
-if [ X"$makefile" != X- ]; then
-    if [ x"$append" = xn ]; then
-        sed -e "/^$magic_string/,\$d" < $makefile > $TMP
-        echo "$magic_string" >> $TMP
-    else
-        cp $makefile $TMP
-    fi
-fi
-
-CMD="$CC -M $args $files"
-if [ X"$makefile" != X- ]; then
-    CMD="$CMD >> $TMP"
-fi
-eval $CMD
-if [ X"$makefile" != X- ]; then
-    $RM ${makefile}.bak
-    $MV $makefile ${makefile}.bak
-    $MV $TMP $makefile
-fi
-
-$RM ${TMP}*
-exit 0
diff --git a/nx-X11/config/util/indir.cmd b/nx-X11/config/util/indir.cmd
deleted file mode 100644
index 2c86690aa..000000000
--- a/nx-X11/config/util/indir.cmd
+++ /dev/null
@@ -1,28 +0,0 @@
-/* OS/2 rexx script to emulate the "cd dir; command" mechanism in make
- * which does not work with stupid CMD.EXE
- *
- * $XFree86: xc/config/util/indir.cmd,v 3.1 1996/01/24 21:56:12 dawes Exp $
- */
-curdir = directory()
-line = fixbadprefix(ARG(1))
-w1 = TRANSLATE(WORD(line,1),'\','/')
-new = directory(w1)
-/*IF (SUBSTR(w1,1,2) = '..') | (POS(w1,new) > 0) THEN DO*/
-  subword(line,2)
-  old = directory(curdir)
-/*END
-ELSE DO
-  say 'Directory 'new' does not exist, ignoring command (nonfatal)'
-END*/
-EXIT
-
-/* somehow make or cmd manages to convert a relative path ..\..\. to ..... */
-fixbadprefix:
-count = 1
-str = ARG(1)
-DO WHILE SUBSTR(str,count,3) = '...'
-   count = count+1
-   str = INSERT('\',str,count)
-   count = count+2
-END
-RETURN str
diff --git a/nx-X11/config/util/install.sh b/nx-X11/config/util/install.sh
deleted file mode 100644
index 7b2d40b85..000000000
--- a/nx-X11/config/util/install.sh
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/bin/sh
-
-#
-# install - install a program, script, or datafile
-#
-# $Xorg: install.sh,v 1.3 2000/08/17 19:41:52 cpqbld Exp $
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-#
-
-
-# set DOITPROG to echo to test this script
-
-doit="${DOITPROG:-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG:-mv}"
-cpprog="${CPPROG:-cp}"
-chmodprog="${CHMODPROG:-chmod}"
-chownprog="${CHOWNPROG:-chown}"
-chgrpprog="${CHGRPPROG:-chgrp}"
-stripprog="${STRIPPROG:-strip}"
-rmprog="${RMPROG:-rm}"
-
-instcmd="$mvprog"
-chmodcmd=""
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-src=""
-dst=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:  no input file specified"
-	exit 1
-fi
-
-if [ x"$dst" = x ]
-then
-	echo "install:  no destination specified"
-	exit 1
-fi
-
-
-# if destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-if [ -d $dst ]
-then
-	dst="$dst"/`basename $src`
-fi
-
-
-# get rid of the old one and mode the new one in
-
-$doit $rmcmd $dst
-$doit $instcmd $src $dst
-
-
-# and set any options; do chmod last to preserve setuid bits
-
-if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; fi
-if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; fi
-if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; fi
-if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; fi
-
-exit 0
diff --git a/nx-X11/config/util/lndir.c b/nx-X11/config/util/lndir.c
deleted file mode 100644
index cd1d983b0..000000000
--- a/nx-X11/config/util/lndir.c
+++ /dev/null
@@ -1,391 +0,0 @@
-/* $Xorg: lndir.c,v 1.5 2001/02/09 02:03:17 xorgcvs Exp $ */
-/* Create shadow link tree (after X11R4 script of the same name)
-   Mark Reinhold (mbr@lcs.mit.edu)/3 January 1990 */
-
-/* 
-Copyright (c) 1990, 1998 The Open Group
-
-Permission to use, copy, modify, distribute, and sell this software and its
-documentation for any purpose is hereby granted without fee, provided that
-the above copyright notice appear in all copies and that both that
-copyright notice and this permission notice appear in supporting
-documentation.
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the name of The Open Group shall not be
-used in advertising or otherwise to promote the sale, use or other dealings
-in this Software without prior written authorization from The Open Group.
-
-*/
-/* $XFree86: xc/config/util/lndir.c,v 3.18 2003/06/24 15:44:45 eich Exp $ */
-
-/* From the original /bin/sh script:
-
-  Used to create a copy of the a directory tree that has links for all
-  non-directories (except, by default, those named BitKeeper, RCS, SCCS
-  or CVS.adm).  If you are building the distribution on more than one
-  machine, you should use this technique.
-
-  If your master sources are located in /usr/local/src/X and you would like
-  your link tree to be in /usr/local/src/new-X, do the following:
-
-   	%  mkdir /usr/local/src/new-X
-	%  cd /usr/local/src/new-X
-   	%  lndir ../X
-*/
-
-#include <X11/Xos.h>
-#include <X11/Xfuncproto.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <sys/stat.h>
-#if !defined(MINIX) && !defined(Lynx)
-#include <sys/param.h>
-#endif
-#include <errno.h>
-
-#ifndef X_NOT_POSIX
-#include <dirent.h>
-#else
-#ifdef SYSV
-#include <dirent.h>
-#else
-#ifdef USG
-#include <dirent.h>
-#else
-#include <sys/dir.h>
-#ifndef dirent
-#define dirent direct
-#endif
-#endif
-#endif
-#endif
-#ifndef MAXPATHLEN
-#define MAXPATHLEN 2048
-#endif
-
-#include <stdarg.h>
-
-int silent = 0;			/* -silent */
-int ignore_links = 0;		/* -ignorelinks */
-int with_revinfo = 0;		/* -withrevinfo */
-
-char *rcurdir;
-char *curdir;
-
-static void
-quit (int code, char * fmt, ...)
-{
-    va_list args;
-    va_start(args, fmt);
-    vfprintf (stderr, fmt, args);
-    va_end(args);
-    putc ('\n', stderr);
-    exit (code);
-}
-
-static void
-quiterr (int code, char *s)
-{
-    perror (s);
-    exit (code);
-}
-
-static void
-msg (char * fmt, ...)
-{
-    va_list args;
-    if (curdir) {
-	fprintf (stderr, "%s:\n", curdir);
-	curdir = 0;
-    }
-    va_start(args, fmt);
-    vfprintf (stderr, fmt, args);
-    va_end(args);
-    putc ('\n', stderr);
-}
-
-static void
-mperror (char *s)
-{
-    if (curdir) {
-	fprintf (stderr, "%s:\n", curdir);
-	curdir = 0;
-    }
-    perror (s);
-}
-
-
-static int 
-equivalent(char *lname, char *rname, char **p)
-{
-    char *s;
-
-    if (!strcmp(lname, rname))
-	return 1;
-    for (s = lname; *s && (s = strchr(s, '/')); s++) {
-	while (s[1] == '/') {
-	    strcpy(s+1, s+2);
-	    if (*p) (*p)--;
-	}
-    }
-    return !strcmp(lname, rname);
-}
-
-
-/* Recursively create symbolic links from the current directory to the "from"
-   directory.  Assumes that files described by fs and ts are directories. */
-static int
-dodir (char *fn,		/* name of "from" directory, either absolute or
-				   relative to cwd */
-       struct stat *fs, 
-       struct stat *ts,		/* stats for the "from" directory and cwd */
-       int rel)			/* if true, prepend "../" to fn before using */
-{
-    DIR *df;
-    struct dirent *dp;
-    char buf[MAXPATHLEN + 1], *p;
-    char symbuf[MAXPATHLEN + 1];
-    char basesym[MAXPATHLEN + 1];
-    struct stat sb, sc;
-    int n_dirs;
-    int symlen;
-    int basesymlen = -1;
-    char *ocurdir;
-
-    if ((fs->st_dev == ts->st_dev) && (fs->st_ino == ts->st_ino)) {
-	msg ("%s: From and to directories are identical!", fn);
-	return 1;
-    }
-
-    if (rel)
-	strcpy (buf, "../");
-    else
-	buf[0] = '\0';
-    strcat (buf, fn);
-    
-    if (!(df = opendir (buf))) {
-	msg ("%s: Cannot opendir", buf);
-	return 1;
-    }
-
-    p = buf + strlen (buf);
-    if (*(p - 1) != '/')
-	*p++ = '/';
-    n_dirs = fs->st_nlink;
-    while ((dp = readdir (df))) {
-	if (dp->d_name[strlen(dp->d_name) - 1] == '~')
-	    continue;
-#ifdef __DARWIN__
-	/* Ignore these Mac OS X Finder data files */
-	if (!strcmp(dp->d_name, ".DS_Store") || 
-	    !strcmp(dp->d_name, "._.DS_Store")) 
-	    continue;
-#endif
-	strcpy (p, dp->d_name);
-
-	if (n_dirs > 0) {
-	    if (lstat (buf, &sb) < 0) {
-		mperror (buf);
-		continue;
-	    }
-
-#ifdef S_ISDIR
-	    if(S_ISDIR(sb.st_mode))
-#else
-	    if ((sb.st_mode & S_IFMT) == S_IFDIR)
-#endif
-	    {
-		/* directory */
-		n_dirs--;
-		if (dp->d_name[0] == '.' &&
-		    (dp->d_name[1] == '\0' || (dp->d_name[1] == '.' &&
-					       dp->d_name[2] == '\0')))
-		    continue;
-		if (!with_revinfo) {
-		    if (!strcmp (dp->d_name, "BitKeeper"))
-			continue;
-		    if (!strcmp (dp->d_name, "RCS"))
-			continue;
-		    if (!strcmp (dp->d_name, "SCCS"))
-			continue;
-		    if (!strcmp (dp->d_name, "CVS"))
-			continue;
-		    if (!strcmp (dp->d_name, "CVS.adm"))
-			continue;
-		    if (!strcmp (dp->d_name, ".svn"))
-			continue;
-		}
-		ocurdir = rcurdir;
-		rcurdir = buf;
-		curdir = silent ? buf : (char *)0;
-		if (!silent)
-		    printf ("%s:\n", buf);
-		if ((stat (dp->d_name, &sc) < 0) && (errno == ENOENT)) {
-		    if (mkdir (dp->d_name, 0777) < 0 ||
-			stat (dp->d_name, &sc) < 0) {
-			mperror (dp->d_name);
-			curdir = rcurdir = ocurdir;
-			continue;
-		    }
-		}
-		if (readlink (dp->d_name, symbuf, sizeof(symbuf) - 1) >= 0) {
-		    msg ("%s: is a link instead of a directory", dp->d_name);
-		    curdir = rcurdir = ocurdir;
-		    continue;
-		}
-		if (chdir (dp->d_name) < 0) {
-		    mperror (dp->d_name);
-		    curdir = rcurdir = ocurdir;
-		    continue;
-		}
-		dodir (buf, &sb, &sc, (buf[0] != '/'));
-		if (chdir ("..") < 0)
-		    quiterr (1, "..");
-		curdir = rcurdir = ocurdir;
-		continue;
-	    }
-	}
-
-	/* non-directory */
-	symlen = readlink (dp->d_name, symbuf, sizeof(symbuf) - 1);
-	if (symlen >= 0)
-	    symbuf[symlen] = '\0';
-
-	/* The option to ignore links exists mostly because
-	   checking for them slows us down by 10-20%.
-	   But it is off by default because this really is a useful check. */
-	if (!ignore_links) {
-	    /* see if the file in the base tree was a symlink */
-	    basesymlen = readlink(buf, basesym, sizeof(basesym) - 1);
-	    if (basesymlen >= 0)
-		basesym[basesymlen] = '\0';
-	}
-
-	if (symlen >= 0) {
-	    /* Link exists in new tree.  Print message if it doesn't match. */
-	    if (!equivalent (basesymlen>=0 ? basesym : buf, symbuf,
-			     basesymlen>=0 ? (char **) 0 : &p))
-		msg ("%s: %s", dp->d_name, symbuf);
-	} else {
-	    char *sympath;
-
-	    if (basesymlen>=0) {
-		if ((buf[0] == '.') && (buf[1] == '.') && (buf[2] == '/') &&
-		    (basesym[0] == '.') && (basesym[1] == '.') &&
-		    (basesym[2] == '/')) {
-		    /* It becomes very tricky here. We have
-		       ../../bar/foo symlinked to ../xxx/yyy. We
-		       can't just use ../xxx/yyy. We have to use
-		       ../../bar/foo/../xxx/yyy.  */
-
-		    int i;
-		    char *start, *end;
-
-		    strcpy (symbuf, buf);
-		    /* Find the first char after "../" in symbuf.  */
-		    start = symbuf;
-		    do {
-			start += 3;
-		    } while ((start[0] == '.') && (start[1] == '.') &&
-			     (start[2] == '/'));
-
-		    /* Then try to eliminate "../"s in basesym.  */
-		    i = 0;
-		    end = strrchr (symbuf, '/');
-		    if (start < end) {
-			do {
-			    i += 3;
-			    end--;
-			    while ((*end != '/') && (end != start))
-				end--;
-			    if (end == start)
-				break;
-			} while ((basesym[i] == '.') &&
-				 (basesym[i + 1] == '.') &&
-				 (basesym[i + 2] == '/'));
-		    }
-		    if (*end == '/')
-			end++;
-		    strcpy (end, &basesym[i]);
-		    sympath = symbuf;
-		}
-		else
-		    sympath = basesym;
-	    }
-	    else
-		sympath = buf;
-	    if (symlink (sympath, dp->d_name) < 0)
-		mperror (dp->d_name);
-	}
-    }
-
-    closedir (df);
-    return 0;
-}
-
-int
-main (int ac, char *av[])
-{
-    char *prog_name = av[0];
-    char *fn, *tn;
-    struct stat fs, ts;
-
-    while (++av, --ac) {
-	if (strcmp(*av, "-silent") == 0)
-	    silent = 1;
-	else if (strcmp(*av, "-ignorelinks") == 0)
-	    ignore_links = 1;
-	else if (strcmp(*av, "-withrevinfo") == 0)
-	    with_revinfo = 1;
-	else if (strcmp(*av, "--") == 0) {
-	    ++av, --ac;
-	    break;
-	}
-	else
-	    break;
-    }
-
-    if (ac < 1 || ac > 2)
-	quit (1, "usage: %s [-silent] [-ignorelinks] fromdir [todir]",
-	      prog_name);
-
-    fn = av[0];
-    if (ac == 2)
-	tn = av[1];
-    else
-	tn = ".";
-
-    /* to directory */
-    if (stat (tn, &ts) < 0)
-	quiterr (1, tn);
-#ifdef S_ISDIR
-    if (!(S_ISDIR(ts.st_mode)))
-#else
-    if (!(ts.st_mode & S_IFMT) == S_IFDIR)
-#endif
-	quit (2, "%s: Not a directory", tn);
-    if (chdir (tn) < 0)
-	quiterr (1, tn);
-
-    /* from directory */
-    if (stat (fn, &fs) < 0)
-	quiterr (1, fn);
-#ifdef S_ISDIR
-    if (!(S_ISDIR(fs.st_mode)))
-#else
-    if (!(fs.st_mode & S_IFMT) == S_IFDIR)
-#endif
-	quit (2, "%s: Not a directory", fn);
-
-    exit (dodir (fn, &fs, &ts, 0));
-}
diff --git a/nx-X11/config/util/lndir.man b/nx-X11/config/util/lndir.man
deleted file mode 100644
index 244e8a58f..000000000
--- a/nx-X11/config/util/lndir.man
+++ /dev/null
@@ -1,119 +0,0 @@
-.\" $Xorg: lndir.man,v 1.4 2001/02/09 02:03:17 xorgcvs Exp $
-.\"
-.\" Copyright (c) 1993, 1994, 1998 The Open Group
-.\" 
-.\" Permission to use, copy, modify, distribute, and sell this software and its
-.\" documentation for any purpose is hereby granted without fee, provided that
-.\" the above copyright notice appear in all copies and that both that
-.\" copyright notice and this permission notice appear in supporting
-.\" documentation.
-.\" 
-.\" The above copyright notice and this permission notice shall be
-.\" included in all copies or substantial portions of the Software.
-.\" 
-.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-.\" EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-.\" IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
-.\" OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-.\" ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-.\" OTHER DEALINGS IN THE SOFTWARE.
-.\" 
-.\" Except as contained in this notice, the name of The Open Group shall
-.\" not be used in advertising or otherwise to promote the sale, use or
-.\" other dealings in this Software without prior written authorization
-.\" from The Open Group.
-.\" 
-.\"
-.\" $XFree86: xc/config/util/lndir.man,v 1.3tsi Exp $
-.\"
-.TH LNDIR 1 __xorgversion__
-.SH NAME
-lndir \- create a shadow directory of symbolic links to another directory tree
-.SH SYNOPSIS
-.B lndir
-[
-.B \-silent
-] [
-.B \-ignorelinks
-] [
-.B \-withrevinfo
-]
-.I \|fromdir\|
-[
-.I todir
-]
-.SH DESCRIPTION
-The
-.I lndir
-program makes a shadow copy 
-.I todir 
-of a directory tree
-.I fromdir, 
-except that the shadow is not
-populated with real files but instead with symbolic links pointing at
-the real files in the 
-.I fromdir
-directory tree.  This is usually useful for maintaining source code for
-different machine architectures.  You create a shadow directory
-containing links to the real source, which you will have usually
-mounted from a remote machine.  You can build in the shadow tree, and
-the object files will be in the shadow directory, while the
-source files in the shadow directory are just symlinks to the real
-files.
-.PP
-This scheme has the advantage that if you update the source, you need not 
-propagate the change to the other architectures by hand, since all
-source in all shadow directories are symlinks to the real thing: just cd
-to the shadow directory and recompile away.
-.PP
-The
-.I todir
-argument is optional and defaults to the current directory.  The
-.I fromdir
-argument may be relative (e.g., ../src) and is relative to
-.I todir
-(not the current directory).
-.PP 
-.\" CVS.adm is used by the Concurrent Versions System.
-Note that BitKeeper, RCS, SCCS, .svn, CVS and CVS.adm directories are
-shadowed only if the \fB\-withrevinfo\fP flag is specified.
-.PP
-If you add files, simply run
-.I lndir
-again.  New files will be silently added.  Old files will be
-checked that they have the correct link.
-.PP
-Deleting files is a more painful problem; the symlinks will
-just point into never never land.
-.PP
-If a file in \fIfromdir\fP is a symbolic link, \fIlndir\fP will make
-the same link in \fItodir\fP rather than making a link back to the
-(symbolic link) entry in \fIfromdir.\fP  The \fB\-ignorelinks\fP flag
-changes this behavior.
-.SH OPTIONS
-.IP \-silent
-Normally \fIlndir\fP outputs the name of each subdirectory as it
-descends into it.  The \fB\-silent\fP option suppresses these status
-messages.
-.IP \-ignorelinks
-Causes the program to not treat symbolic links in \fIfromdir\fP
-specially.  The link created in \fItodir\fP will point back to the
-corresponding (symbolic link) file in \fIfromdir\fP.
-If the link is to a directory, this is almost certainly the wrong thing.
-.IP
-This option exists mostly to emulate the behavior the C version of
-\fIlndir\fP had in X11R6.  Its use is not recommended.
-.IP \-withrevinfo
-Causes any BitKeeper, RCS, SCCS, .svn, CVS and CVS.adm subdirectories to be
-treated as any other directory, rather than ignored.
-.SH DIAGNOSTICS
-The program displays the name of each subdirectory it enters, followed
-by a colon.  The \fB\-silent\fP option suppresses these messages.
-.PP
-A warning message is displayed if the symbolic link cannot be created.
-The usual problem is that a regular file of the same name already
-exists.
-.PP
-If the link already exists but doesn't point to the correct file, the
-program prints the link name and the location where it does point.
diff --git a/nx-X11/config/util/makedef.cmd b/nx-X11/config/util/makedef.cmd
deleted file mode 100644
index 9d5d6decf..000000000
--- a/nx-X11/config/util/makedef.cmd
+++ /dev/null
@@ -1,620 +0,0 @@
-/* This is OS/2 REXX */
-/* $XFree86: xc/config/util/makedef.cmd,v 1.4 2003/11/12 00:10:24 dawes Exp $
- *
- * This file was taken from Odin32 project, modified to suit
- * XFree86 4.x build process and then modified to suit
- * the X.org monolithic build process for X11R6.7
- *
- * Generate *os2.def linker definition files for OS/2
- */
-
-if RxFuncQuery('SysLoadFuncs')=1 THEN
-DO
-  call RxFuncAdd 'SysLoadFuncs', 'RexxUtil', 'SysLoadFuncs';
-  call SysLoadFuncs;
-END
-  
-/*
- * Set default parameter values.
- */
-sLibrary      = '';
-sDBFile     = '';
-sOrdinals       = 0;
-sASDFeatureId   = '';
-sCountryCode    = '';
-sDateTime       = left(' 'date()' 'time(), 26);
-sDescription    = 'X.Org 6.9';
-sFixPakVer      = '';
-sHostname       = strip(substr(VALUE('HOSTNAME',,'OS2ENVIRONMENT'), 1, 11));
-sLanguageCode   = '';
-sMiniVer        = '';
-sVendor         = 'X.Org';
-sVersion        = '6.9';
-
-
-/*
- * Parse parameters.
- */
-parse arg  sArgs
-if (sArgs = '') then
-do
-    call syntax;
-    exit(1);
-end
-
-do while (sArgs <> '')
-    sArgs = strip(sArgs);
-    if (substr(sArgs, 1, 1) = '-' | substr(sArgs, 1, 1) = '/') then
-    do  /*
-         * Option.
-         */
-        ch = translate(substr(sArgs, 2, 1));
-        if (pos(ch, 'ACDHLMNOPRTV') < 1) then
-        do
-            say 'invalid option:' substr(sArgs, 1, 2);
-            call syntax;
-            exit(2);
-        end
-
-        /* get value and advance sArgs to next or to end. */
-        if (substr(sArgs, 3, 1) = '"') then
-        do
-            iNext = pos('"', sArgs, 4);
-            fQuote = 1;
-        end
-        else
-        do
-            iNext = pos(' ', sArgs, 3);
-            if (iNext <= 0) then
-                iNext = length(sArgs);
-            fQuote = 0;
-        end
-
-        if (iNext > 3 | ch = 'R') then
-        do
-            sValue = substr(sArgs, 3 + fQuote, iNext - 3 - fQuote);
-            sArgs = strip(substr(sArgs, iNext+1));
-            /*say 'iNext:' iNext  'sValue:' sValue  'sArgs:' sArgs; */
-
-            /* check if we're gonna search for something in an file. */
-            if (sValue <> '' & pos('#define=', sValue) > 0) then
-                sValue = LookupDefine(sValue);
-        end
-        else
-        do
-            say 'syntax error near' substr(sArgs, 1, 2)'.';
-            call syntax;
-            exit(3);
-        end
-
-
-        /* set value */
-        select
-            when (ch = 'A') then /* ASD Feature Id */
-                sASDFeatureId   = sValue;
-
-            when (ch = 'C') then /* Country code */
-                sCountryCode    = sValue;
-
-            when (ch = 'D') then /* Description */
-                sDescription    = sValue;
-
-            when (ch = 'H') then /* Hostname */
-                sHostname       = sValue;
-
-            when (ch = 'L') then /* Language code */
-                sLanguageCode   = sValue;
-
-            when (ch = 'M') then /* MiniVer */
-                sMiniVer        = sValue;
-
-            when (ch = 'N') then /* Vendor */
-                sVendor         = sValue;
-
-            when (ch = 'O') then /* Ordinals */
-                sOrdinals        = 1;
-                
-            when (ch = 'R') then /* Vendor */
-                sDescription    = ReadDescription(sValue, sDefFile);
-
-            when (ch = 'P') then /* Fixpak version */
-                sFixPakVer      = sValue;
-
-            when (ch = 'T') then /* Date Time */
-                sDateTime       = sValue;
-
-            when (ch = 'V') then /* Version */
-                sVersion        = sValue;
-
-            /* Otherwise it's an illegal option */
-            otherwise:
-                say 'invalid option:' substr(sArgs, 1, 2);
-                call syntax;
-                exit(2);
-        end /* select */
-    end
-    else
-    do  /*
-         * Table file name, typically xc/config/cf/os2def.db
-         */
-        if (sLibrary <> '') then
-        do
-            say 'Syntax error: Can''t specify more than two files!';
-            exit(4);
-        end
-        if (sDBFile = '') then
-            parse value sArgs with sDBFile' 'sArgs
-        else
-            parse value sArgs with sLibrary' 'sArgs
-        sArgs = strip(sArgs);
-    end
-end
-
-/* check that a definition file was specified. */
-if (sLibrary = '') then
-do
-    say 'Syntax error: Will have to specify a library stem.';
-    call syntax;
-    exit(5);
-end
-
-
-/*
- * Trim strings to correct lengths.
- */
-sVendor         = strip(substr(sVendor, 1, 31));
-if (substr(sDateTime, 1, 1) <> ' ') then
-    sDateTime = ' ' || sDateTime;
-sDateTime       = left(sDateTime, 26);
-sHostname       = strip(substr(sHostname, 1, 11));
-sMiniVer        = strip(substr(sMiniVer, 1, 11));
-sDescription    = strip(substr(sDescription, 1, 80));
-sCountryCode    = strip(substr(sCountryCode, 1, 4));
-sLanguageCode   = strip(substr(sLanguageCode, 1, 4));
-sASDFeatureId   = strip(substr(sASDFeatureId, 1, 11));
-sFixPakVer      = strip(substr(sFixPakVer, 1, 11));
-
-/* load database file, only accept lines for the specified sLibrary */
-ordHash.0 = 0
-sRealName = ''
-sInitTerm = 0
-
-rc = LoadDBFile(sDBFile,sLibrary)
-
-/* engage gcc to parse the corresponding -def.cpp file */
-'@gcc -E -D__UNIXOS2__ 'sLibrary'-def.cpp >tmpos2.def'
-
-/* Signature */
-sEnhSign = '##1##'
-
-/*
- * Build description string.
- */
-sDescription =  '@#'sVendor':'sVersion'#@'sEnhSign||,
-                sDateTime||sHostname||,
-                ':'sASDFeatureId':'sLanguageCode':'sCountryCode':'sMiniVer||,
-                '::'sFixPakVer'@@'sDescription;
-
-/*
- * Update .def-file.
- */
-rc = UpdateDefFile(sLibrary,sDescription,sRealName,sOrdinals,sInitTerm);
-call SysFileDelete('tmpos2.def')
-
-exit(rc);
-
-LoadDBFile: procedure expose ordHash. sRealname sInitTerm
-    parse arg dbfile,libname;
-
-    rc = stream(dbfile, 'c', 'open read');
-    if (pos('READY', rc) <> 1) then
-    do
-        say 'error: failed to open 'dbfile;
-        exit(-1);
-    end
-    do while (lines(dbfile) > 0)
-      line = translate(strip(linein(dbfile)),' ','	');
-      if pos(';',line) > 0 then iterate;
-      if pos('LIBRARY',line) > 0 then do
-        if word(line,2) = libname then do
-          sRealname = word(line,3)
-	  if word(line,4) <> '' then
-	    sInitTerm = 1
-	end
-        iterate
-      end
-      if word(line,1) = libname then do
-	name = word(line,2)
-	ordHash.name = word(line,3)
-      end
-    end      
-    rc = stream(dbfile,'c','close')
-    return rc
-
-/**
- * Display script syntax.
- */
-syntax: procedure
-    say 'Syntax: MakeDef.cmd [options] <dbfile> <libname> [options]'
-    say '   <dbfile>   Ordinals database.'
-    say '   <libname>  Library stem'
-    say 'Options:'
-    say '   -A<string>  ASD Feature Id.'
-    say '   -C<string>  Country code.'
-    say '   -D<string>  Description.'
-    say '   -O<string>  Ordinals definition file.'    
-    say '   -R[deffile] Read description from .def file.'
-    say '   -H<string>  Hostname.'
-    say '   -L<string>  Language code.'
-    say '   -M<string>  MiniVer.'
-    say '   -N<string>  Vendor.'
-    say '   -P<string>  Fixpak version.'
-    say '   -T<string>  Date Time.'
-    say '   -V<string>  Version.'
-    say '<string> could be a double quoted string or a single word.'
-    say '       You could also reference #defines in C/C++ include files.'
-    say '       The string should then have this form:'
-    say '           "#define=<DEFINE_NAME>,<includefile.h>"'
-    say '';
-
-    return;
-
-
-/**
- * Search for a #define in an C/C++ header or source file.
- *
- * @returns String containing the defined value
- *          found for the define in the header file.
- *          Quits on fatal errors.
- * @param   A string on the form: "#define=DEFINETOFIND,includefile.h"
- * @remark  Write only code... - let's hope it works.
- */
-LookupDefine: procedure
-    parse arg '#'sDefine'='sMacro','sIncludeFile
-
-    /*
-     * Validate parameters.
-     */
-    sMacro = strip(sMacro);
-    sIncludeFile = strip(sIncludeFile);
-    if (sMacro = '') then
-    do
-        say 'syntax error: #define=<DEFINE_NAME>,<includefile.h>.';
-        say '    <DEFINE_NAME> was empty.';
-        exit(-20);
-    end
-    if (sIncludeFile = '') then
-    do
-        say 'syntax error: #define=<DEFINE_NAME>,<includefile.h>.';
-        say '    <includefile.h> was empty.';
-        exit(-20);
-    end
-
-
-    sIllegal = translate(translate(sMacro),,
-                         '!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!',,
-                         'ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890_');
-
-    if (strip(translate(sIllegal, ' ', '!')) <> '') then
-    do
-        say 'syntax error: #define=<DEFINE_NAME>,<includefile.h>.';
-        say '    <DEFINE_NAME> contains illegal charater(s).'
-        say '        'sMacro;
-        say '        'translate(sIllegal, ' ', '!');
-        exit(-20);
-    end
-
-    /*
-     * Open include file.
-     */
-    sRc = stream(sIncludeFile, 'c', 'open read');
-    if (pos('READY', sRc) <> 1) then
-    do  /* search INCLUDE variable */
-        sFile = SysSearchPath('INCLUDE', sIncludeFile);
-        if (sFile = '') then
-        do
-            say 'Can''t find include file 'sIncludeFile'.';
-            exit(-20);
-        end
-        sIncludeFile = sFile;
-
-        sRc = stream(sIncludeFile, 'c', 'open read');
-        if (pos('READY', sRc) <> 1) then
-        do
-            say 'Failed to open include file' sIncludeFile'.';
-            exit(-20);
-        end
-    end
-
-    /*
-     * Search the file line by line.
-     *  We'll check for lines starting with a hash (#) char.
-     *  Then check that the word after the hash is 'define'.
-     *  Then match the next word with the macro name.
-     *  Then then get the next rest of the line to comment or continuation char.
-     *      (continuation is not supported)
-     *  Finally strip quotes.
-     */
-    sValue = '';
-    do while (lines(sIncludeFile) > 0)
-        sLine = strip(linein(sIncludeFile));
-        if (sLine = '') then
-            iterate;
-        if (substr(sLine, 1, 1) <> '#') then
-            iterate;
-        sLine = substr(sLine, 2);
-        if (word(sLine, 1) <> 'define') then
-            iterate;
-        sLine = strip(substr(sLine, wordpos(sLine, 1) + length('define')+1));
-        if (  substr(sLine, 1, length(sMacro)) <> sMacro,
-            | substr(sLine, length(sMacro)+1, 1) <> ' ') then
-            iterate;
-        sLine = strip(substr(sLine, length(sMacro) + 1));
-        if (sLine = '') then
-        do
-            say 'error: #define' sMacro' is empty.';
-            call stream sIncludeFile, 'c', 'close';
-            exit(-20);
-        end
-
-        chQuote = substr(sLine, 1, 1);
-        if (chQuote = '"' | chQuote = "'") then
-        do  /* quoted string */
-            iLastQuote = 0;
-            do forever
-                iLast = pos(chQuote, sLine, 2);
-                if (iLast <= 0) then
-                    leave;
-                if (substr(sLine, iLast, 1) = '\') then
-                    iterate;
-                iLastQuote = iLast;
-                leave;
-            end
-
-            if (iLastQuote <= 0) then
-            do
-                say 'C/C++ syntax error in 'sIncludefile': didn''t find end quote.';
-                call stream sIncludeFile, 'c', 'close';
-                exit(-20);
-            end
-
-            call stream sIncludeFile, 'c', 'close';
-            sValue = substr(sLine, 2, iLastQuote - 2);
-            say 'Found 'sMacro'='sValue;
-            return sValue;
-        end
-        else
-        do
-            iCommentCPP = pos('//',sLine);
-            iCommentC   = pos('/*',sLine);
-            if (iCommentC > 0 & iCommentCPP > 0 & iCommentC > iCommentCPP) then
-                iComment = iCommentCPP;
-            else if (iCommentC > 0 & iCommentCPP > 0 & iCommentC < iCommentCPP) then
-                iComment = iCommentC;
-            else if (iCommentCPP > 0) then
-                iComment = iCommentCPP;
-            else if (iCommentC > 0) then
-                iComment = iCommentC;
-            else
-                iComment = 0;
-
-            if (iComment > 0) then
-                sValue = strip(substr(sLine, 1, iComment-1));
-            else
-                sValue = strip(sLine);
-
-            if (sValue <> '') then
-            do
-                if (substr(sValue, length(sValue)) = '\') then
-                do
-                    say 'Found continuation char: Multiline definitions are not supported!\n';
-                    call stream sIncludeFile, 'c', 'close';
-                    exit(-20);
-                end
-            end
-
-            if (sValue = '') then
-                say 'warning: The #define has no value.';
-
-            call stream sIncludeFile, 'c', 'close';
-            say 'Found 'sMacro'='sValue;
-            return sValue;
-        end
-    end
-
-    call stream sIncludeFile, 'c', 'close';
-    say 'error: didn''t find #define' sMacro'.';
-    exit(-20);
-
-
-
-/**
- * Reads the description line for a .def-file.
- * @returns The Description string, with quotes removed.
- *          Empty string is acceptable.
- *          On error we'll terminate the script.
- * @param   sDefFile    Filename of .def-file to read the description from.
- * @param   sDefFile2   Used if sDefFile is empty.
- * @author  knut st. osmundsen (knut.stange.osmundsen@mynd.no)
- */
-ReadDescription: procedure;
-    parse arg sDefFile, sDefFile2
-
-    /*
-     * Validate parameters.
-     */
-    if (sDefFile = '') then
-        sDefFile = sDefFile2;
-    if (sDefFile = '') then
-    do
-        say 'error: no definition file to get description from.'
-        exit(-1);
-    end
-
-    /*
-     * Open file
-     */
-    rc = stream(sDefFile, 'c', 'open read');
-    if (pos('READY', rc) <> 1) then
-    do
-        say 'error: failed to open deffile file.';
-        exit(-1);
-    end
-
-
-    /*
-     * Search for the 'DESCRIPTION' line.
-     */
-    do while (lines(sDefFile) > 0)
-        sLine = strip(linein(sDefFile));
-        if (sLine = '') then
-            iterate;
-        if (translate(word(sLine, 1)) <> 'DESCRIPTION') then
-            iterate;
-        sLine = strip(substr(sLine, wordpos(sLine, 1) + length('DESCRIPTION')+1));
-
-        ch = substr(sLine, 1, 1);
-        if (ch <> "'" & ch <> '"') then
-        do
-            say 'syntax error: description line in' sDefFile 'is misformed.';
-            call stream sDefFile, 'c', 'close';
-            exit(-10);
-        end
-
-        iEnd = pos(ch, sLine, 2);
-        if (iEnd <= 0) then
-        do
-            say 'syntax error: description line in' sDefFile 'is misformed.';
-            call stream sDefFile, 'c', 'close';
-            exit(-10);
-        end
-
-        call stream sDefFile, 'c', 'close';
-        sValue = substr(sLine, 2, iEnd - 2);
-        say 'Found Description:' sValue;
-        return sValue;
-    end
-
-    call stream sDefFile, 'c', 'close';
-    say 'info: Didn''t find description line in' sDefFile'.';
-    return '';
-
-AddCodeDataSection: procedure 
-    parse arg outfile;
-    call lineout outfile,"CODE PRELOAD";
-    call lineout outfile,"DATA MULTIPLE NONSHARED";
-    return '';
-     
-findOrdinal: procedure expose ordHash.
-    parse arg line,sOrdinal;
-    line = strip(line,,'	');
-    line = word(translate(strip(line),' ','='),1)
-    if (sOrdinal) then do
-        ordinal = ordHash.line;
-        if (ordinal = 'ORDHASH.'line) then do
-            say 'Oops: DB lacks ordinal for symbol "'line'" Create one!'
-            return '	'line
-        end
-        else
-            return '	'line' @ 'ordinal
-    end
-    else
-      return '	'line
-/**
- * This is a function which reads sLibrary into an
- * internal array and changes the DESCRIPTION text if found.
- * If DESCRIPTION isn't found, it is added at the end.
- * The array is written to sDBFile.
- * @returns 0 on succes.
- *          Errorcode on error.
- * @param   sLibrary	library stem
- * @param   sDescription    New description string.
- * @param   sRealname	real 8.3 name of library
- * @param   sOrdinals	flag to denote generation of ordinals
- * @param   sInitTerm	flag to denote adding INITINSTANCE/TERM... qualifiers
- * @author  knut st. osmundsen (knut.stange.osmundsen@mynd.no)
- * @author  heavily modified by Platon & Holger
- */
-UpdateDefFile: procedure expose ordHash.;
-    parse arg sLibrary, sDescription, sRealname, sOrdinals, sInitTerm
-
-    initterm = ''
-    if sInitTerm = 1 then initterm = 'INITINSTANCE TERMINSTANCE'
-
-    /* Open input file. */
-    infile = 'tmpos2.def'
-    rc = stream(infile, 'c', 'open read');
-    if (pos('READY', rc) <> 1) then do
-        say 'error: failed to open' infile 'file.';
-        return 110;
-    end
-    /* open output file. */
-    if sOrdinals = 1 then
-      outfile = sLibrary'o_os2.def'
-    else
-      outfile = sLibrary'os2.def'
-    call SysFileDelete(outfile)
-    rc = stream(outfile, 'c', 'open write');
-    if (pos('READY', rc) <> 1) then do
-        say 'error: failed to open outputfile' outfile 'file.';
-        return 110;
-    end
-    call lineout outfile, '; Created by makedef.cmd on' date() time()'. Do not edit.', 1;
- 
-    /*
-     * Search for the specific lines.
-     */
-    fDescription = 0;
-    fExports = 0;
-    fWinLib = 0;
-    do while (lines(infile) > 0)
-	line = strip(linein(infile));
-        line = strip(line,,'	');
-	if line = '' then iterate;
-	if pos('#',line) = 1 then iterate;
-	if pos(';',line) = 1 then iterate;	
-	if pos('/*',line) = 1 then iterate;
-        
-	firstsym = translate(word(line,1))
-	if firstsym = 'LIBRARY' then do
-	    call lineout outfile,'LIBRARY 'sRealName' 'initterm
-	    iterate
-	end
-        if firstsym = 'VERSION' then do
-          call lineout outfile, 'DESCRIPTION "'sDescription sLibrary'"'
-          fDescription = 1;
-          AddCodeDataSection(outfile);
-	end   
-       	if (firstsym = 'EXPORTS') then do
-	  call lineout outfile,'EXPORTS'
-          fExports = 1;
-	  iterate;
-	end   
-        if (fExports) then do
-          call lineout outfile, findOrdinal(line,sOrdinals);
-          iterate;
-        end
-    end
-
-    /*
-     * Add description is none was found.
-     */
-    if (\fDescription) then
-    do
-        call lineout outfile,"DESCRIPTION '"||sDescription sLibrary||"'";
-        AddCodeDataSection(outfile);
-    end
-
-    /*
-     * Close input file and open output file.
-     */
-    call stream outfile, 'c', 'close';
-    call stream infile, 'c', 'close';
-    if sOrdinals = 1 then do
-        call SysFileDelete('dll.name');
-        call stream 'dll.name', 'c', 'open write';
-        call charout 'dll.name', sRealName".dll";
-        call stream 'dll.name', 'c'. 'close';
-    end
-    return 0;
-
diff --git a/nx-X11/config/util/makeg.man b/nx-X11/config/util/makeg.man
deleted file mode 100644
index 815031d94..000000000
--- a/nx-X11/config/util/makeg.man
+++ /dev/null
@@ -1,64 +0,0 @@
-.\" $Xorg: makeg.man,v 1.4 2001/02/09 02:03:17 xorgcvs Exp $
-.\" Copyright (c) 1996, 1998 The Open Group
-.\" 
-.\" Permission to use, copy, modify, distribute, and sell this software and its
-.\" documentation for any purpose is hereby granted without fee, provided that
-.\" the above copyright notice appear in all copies and that both that
-.\" copyright notice and this permission notice appear in supporting
-.\" documentation.
-.\" 
-.\" The above copyright notice and this permission notice shall be
-.\" included in all copies or substantial portions of the Software.
-.\" 
-.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-.\" EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-.\" IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
-.\" OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-.\" ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-.\" OTHER DEALINGS IN THE SOFTWARE.
-.\" 
-.\" Except as contained in this notice, the name of The Open Group shall
-.\" not be used in advertising or otherwise to promote the sale, use or
-.\" other dealings in this Software without prior written authorization
-.\" from The Open Group.
-.\"
-.\"
-.\" $XFree86: xc/config/util/makeg.man,v 1.2 2001/01/27 18:19:55 dawes Exp $
-.\"
-.TH MAKEG 1 __xorgversion__
-.SH NAME
-makeg \- make a debuggable executable
-.SH SYNOPSIS
-.B makeg
-[
-.I make-options .\|.\|.
-] [
-.I targets  .\|.\|.
-]
-.SH DESCRIPTION
-The
-.I makeg
-script runs
-.I make,
-passing it variable settings to create a debuggable target when used
-with a Makefile generated by
-.I imake.
-For example, it arranges for the C compiler to be called with the
-.B \-g
-option.
-.SH ENVIRONMENT
-.TP 8
-.B MAKE
-The
-.I make
-program to use.  Default ``make''.
-.TP 8
-.B GDB
-Set to a non-null value if using the
-.I gdb
-debugger on Solaris 2, which requires additional debugging options to
-be passed to the compiler.
-.SH "SEE ALSO"
-.I make (1),
-.I imake (1)
diff --git a/nx-X11/config/util/makeg.sh b/nx-X11/config/util/makeg.sh
deleted file mode 100644
index 38be8c9e2..000000000
--- a/nx-X11/config/util/makeg.sh
+++ /dev/null
@@ -1,13 +0,0 @@
-#! /bin/sh
-# makeg - run "make" with options necessary to make a debuggable executable
-# $Xorg: makeg.sh,v 1.3 2000/08/17 19:41:52 cpqbld Exp $
-
-# set GDB=1 in your environment if using gdb on Solaris 2.
-
-make="${MAKE-make}"
-flags="CDEBUGFLAGS=-g CXXDEBUGFLAGS=-g"
-
-# gdb on Solaris needs the stabs included in the executable
-test "${GDB+yes}" = yes && flags="$flags -xs"
-
-exec "$make" $flags LDSTRIPFLAGS= ${1+"$@"}
diff --git a/nx-X11/config/util/makestrs.c b/nx-X11/config/util/makestrs.c
deleted file mode 100644
index af4b69619..000000000
--- a/nx-X11/config/util/makestrs.c
+++ /dev/null
@@ -1,752 +0,0 @@
-/* $XdotOrg: xc/config/util/makestrs.c,v 1.4 2005/05/24 15:58:51 ago Exp $ */
-
-/*
-
-Copyright (c) 1991, 1998 The Open Group
-
-Permission to use, copy, modify, distribute, and sell this software and its
-documentation for any purpose is hereby granted without fee, provided that
-the above copyright notice appear in all copies and that both that
-copyright notice and this permission notice appear in supporting
-documentation.
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the name of The Open Group shall not be
-used in advertising or otherwise to promote the sale, use or other dealings
-in this Software without prior written authorization from The Open Group.
-
-*/
-/* $XFree86: xc/config/util/makestrs.c,v 3.6 2001/07/25 15:04:41 dawes Exp $ */
-
-/* Constructs string definitions */
-
-#include <stdio.h>
-#include <X11/Xos.h>
-#include <stdlib.h>
-#include <unistd.h>
-#if defined(macII) && !defined(__STDC__)  /* stdlib.h fails to define these */
-char *malloc();
-#endif /* macII */
-
-typedef struct _TableEnt {
-    struct _TableEnt* next;
-    char* left;
-    char* right;
-    int offset;
-} TableEnt;
-
-typedef struct _Table {
-    struct _Table* next;
-    TableEnt* tableent;
-    TableEnt* tableentcurrent;
-    TableEnt** tableenttail;
-    char* name;
-    int offset;
-} Table;
-
-typedef struct _File {
-    struct _File* next;
-    FILE* tmpl;
-    char* name;
-    Table* table;
-    Table* tablecurrent;
-    Table** tabletail;
-} File;
-
-static File* file = NULL;
-static File* filecurrent = NULL;
-static File** filetail = &file;
-static char* conststr;
-static char* prefixstr = NULL;
-static char* featurestr = NULL;
-static char* ctmplstr = NULL;
-static char* fileprotstr;
-static char* externrefstr;
-static char* externdefstr;
-
-#ifndef FALSE
-# define FALSE 0
-# define TRUE  !(FALSE)
-#endif
-
-static int   solaris_abi_names = FALSE;
-
-#define X_DEFAULT_ABI	0
-#define X_ARRAYPER_ABI	1
-#define X_INTEL_ABI	2
-#define X_INTEL_ABI_BC	3
-#define X_SPARC_ABI	4
-#define X_FUNCTION_ABI	5
-
-#define X_MAGIC_STRING "<<<STRING_TABLE_GOES_HERE>>>"
-
-/* Wrapper for fopen()
- * Prepend filename with an includedir which can be specified on the 
- * commandline. Needed to separate source and build directories.
- */
-static char* includedir = NULL;
-static FILE *ifopen(const char *file, const char *mode)
-{
-    size_t len;
-    char *buffer;
-    FILE *ret;
-    
-    if (includedir == NULL)
-        return fopen(file, mode);
-
-    len = strlen(file) + strlen(includedir) + 1;
-    buffer = (char*)malloc(len + 1);
-    if (buffer == NULL)
-        return NULL;
-            
-    strcpy(buffer, includedir);
-    strcat(buffer, "/");
-    strcat(buffer, file);
-
-    ret = fopen(buffer, mode);
-
-    free(buffer);
-    return ret;
-}
-
-static void WriteHeaderProlog (FILE *f, File *phile)
-{
-    Table* t;
-    TableEnt* te;
-
-    (void) fprintf (f, "#ifdef %s\n", featurestr);
-    for (t = phile->table; t; t = t->next)
-	for (te = t->tableent; te; te = te->next) {
-	    if (strcmp (te->left, "RAtom") == 0) {
-		(void) fprintf (f, 
-			"#ifndef %s%s\n#define %s%s \"%s\"\n#endif\n",
-			prefixstr, te->left, prefixstr, te->left, te->right);
-	    } else {
-		(void) fprintf (f, 
-			"#define %s%s \"%s\"\n",
-			prefixstr, te->left, te->right);
-	    }
-	}
-    (void) fprintf (f, "%s", "#else\n");
-}
-
-static void IntelABIWriteHeader (FILE *f, File *phile)
-{
-    Table* t;
-    TableEnt* te;
-
-    WriteHeaderProlog (f, phile);
-
-    for (t = phile->table; t; t = t->next) {
-      (void) fprintf (f, "%s %sConst char %s[];\n", 
-		      externrefstr, conststr ? conststr : fileprotstr, t->name);
-	for (te = t->tableent; te; te = te->next)
-	    (void) fprintf (f, 
-		"#ifndef %s%s\n#define %s%s ((char*)&%s[%d])\n#endif\n",
-		prefixstr, te->left, prefixstr, te->left, t->name, te->offset);
-    }
-
-    (void) fprintf (f, "#endif /* %s */\n", featurestr);
-}
-
-static void SPARCABIWriteHeader (FILE *f, File *phile)
-{
-    Table* t;
-    TableEnt* te;
-
-    for (t = phile->table; t; t = t->next)
-	for (te = t->tableent; te; te = te->next)
-	    (void) fprintf (f, "#define %s%s \"%s\"\n",
-			    prefixstr, te->left, te->right);
-}
-
-static void FunctionWriteHeader (FILE *f, File *phile)
-{
-    Table* t;
-    TableEnt* te;
-
-    WriteHeaderProlog (f, phile);
-
-    (void) fprintf (f, "%s %sConst char* %s();\n", 
-		    externrefstr, conststr ? conststr : fileprotstr, 
-		    phile->table->name);
-
-    for (t = phile->table; t; t = t->next)
-	for (te = t->tableent; te; te = te->next)
-	    (void) fprintf (f, 
-		"#ifndef %s%s\n#define %s%s (%s(%d))\n#endif\n",
-		prefixstr, te->left, prefixstr, te->left, phile->table->name, 
-		te->offset);
-
-    (void) fprintf (f, "#endif /* %s */\n", featurestr);
-}
-
-static void ArrayperWriteHeader (FILE *f, File *phile)
-{
-    Table* t;
-    TableEnt* te;
-
-    WriteHeaderProlog (f, phile);
-
-    for (t = phile->table; t; t = t->next)
-        for (te = t->tableent; te; te = te->next)
-	    (void) fprintf (f, 
-			    "#ifndef %s%s\n%s %sConst char %s%s[];\n#endif\n",
-			    prefixstr, te->left, 
-			    externrefstr, conststr ? conststr : fileprotstr, 
-			    prefixstr, te->left);
-
-    (void) fprintf (f, "#endif /* %s */\n", featurestr);
-}
-
-static void DefaultWriteHeader (FILE *f, File *phile)
-{
-    Table* t;
-    TableEnt* te;
-
-    WriteHeaderProlog (f, phile);
-
-    (void) fprintf (f, "%s %sConst char %s[];\n", 
-		    externrefstr, conststr ? conststr : fileprotstr, 
-		    phile->table->name);
-
-    for (t = phile->table; t; t = t->next)
-	for (te = t->tableent; te; te = te->next)
-	    (void) fprintf (f, 
-		"#ifndef %s%s\n#define %s%s ((char*)&%s[%d])\n#endif\n",
-		prefixstr, te->left, prefixstr, te->left, phile->table->name, 
-		te->offset);
-
-    (void) fprintf (f, "#endif /* %s */\n", featurestr);
-}
-
-static void CopyTmplProlog (FILE *tmpl, FILE *f)
-{
-    char buf[1024];
-    static char* magic_string = X_MAGIC_STRING;
-    int magic_string_len = strlen (magic_string);
-
-    while (fgets (buf, sizeof buf, tmpl)) {
-	if (strncmp (buf, magic_string, magic_string_len) == 0) {
-	    return;
-	}
-	(void) fputs (buf, f);
-    }
-}
-
-static void CopyTmplEpilog (FILE *tmpl, FILE *f)
-{
-    char buf[1024];
-
-    while (fgets (buf, sizeof buf, tmpl))
-	(void) fputs (buf, f);
-}
-
-static char* abistring[] = {
-    "Default", "Array per string", "Intel", "Intel BC", "SPARC", "Function" };
-
-static void WriteHeader (char *tagline, File *phile, int abi)
-{
-    FILE* f;
-    char* tmp;
-    static void (*headerproc[])(FILE *f, File *phile) = { 
-	DefaultWriteHeader, ArrayperWriteHeader,
-	IntelABIWriteHeader, IntelABIWriteHeader,
-	SPARCABIWriteHeader, FunctionWriteHeader };
-
-    if ((f = fopen (phile->name, "w+")) == NULL) exit (1);
-
-    if (phile->tmpl) CopyTmplProlog (phile->tmpl, f);
-
-    (void) fprintf (f, 
-	"%s\n%s\n/* %s ABI version -- Do not edit */\n", 
-	"/* $Xorg: makestrs.c,v 1.6 2001/02/09 02:03:17 xorgcvs Exp $ */",
-	"/* This file is automatically generated. */",
-	abistring[abi]);
-
-    if (tagline) (void) fprintf (f, "/* %s */\n\n", tagline);
-
-    /* do the right thing for Motif, i.e. avoid _XmXmStrDefs_h_ */
-    if (strcmp (prefixstr, "Xm") == 0) {
-	if ((fileprotstr = malloc (strlen (phile->name) + 3)) == NULL)
-	   exit (1);
-	(void) sprintf (fileprotstr, "_%s_", phile->name);
-    } else {
-	if ((fileprotstr = malloc (strlen (phile->name) + strlen (prefixstr) +  3)) == NULL)
-	   exit (1);
-	(void) sprintf (fileprotstr, "_%s%s_", prefixstr, phile->name);
-    }
-
-    for (tmp = fileprotstr; *tmp; tmp++) if (*tmp == '.') *tmp = '_';
-
-    (*headerproc[abi])(f, phile);
-
-    if (phile->tmpl) CopyTmplEpilog (phile->tmpl, f);
-
-    (void) free (fileprotstr);
-    (void) fclose (phile->tmpl);
-    (void) fclose (f);
-}
-
-static void WriteSourceLine (TableEnt *te, int abi, int fudge)
-{
-    char* c;
-
-    for (c = te->right; *c; c++) (void) printf ("'%c',", *c);
-    (void) printf ("%c", '0');
-    if (te->next || fudge) (void) printf ("%c", ',');
-    (void) printf ("%s", "\n");
-}
-
-static char* const_string = "%s %sConst char %s[] = {\n";
-
-static void IntelABIWriteSource (int abi)
-{
-    File* phile;
-
-    for (phile = file; phile; phile = phile->next) {
-	Table* t;
-	TableEnt* te;
-
-	for (t = phile->table; t; t = t->next) {
-	    (void) printf (const_string, externdefstr, 
-			   conststr ? conststr : "", t->name);
-	    for (te = t->tableent; te; te = te->next)
-		WriteSourceLine (te, abi, 0);
-	    (void) printf ("%s\n\n", "};");
-	}
-    }
-}
-
-static void IntelABIBCWriteSource (int abi)
-{
-    File* phile;
-
-    for (phile = file; phile; phile = phile->next) {
-	Table* t;
-	TableEnt* te;
-
-	(void) printf (const_string, externdefstr, 
-		       conststr ? conststr : "", phile->table->name);
-
-	for (t = phile->table; t; t = t->next) 
-	    for (te = t->tableent; te; te = te->next)
-		WriteSourceLine (te, abi, t->next ? 1 : 0);
-	(void) printf ("%s\n\n", "};");
-
-	if (phile->table->next) {
-	    (void) printf (const_string, externdefstr, 
-			   conststr ? conststr : "", phile->table->next->name);
-	    for (t = phile->table->next; t; t = t->next) 
-		for (te = t->tableent; te; te = te->next)
-		    WriteSourceLine (te, abi, 0);
-	    (void) printf ("%s\n\n", "};");
-	}
-    }
-}
-
-static void FunctionWriteSource (int abi)
-{
-    File* phile;
-
-    for (phile = file; phile; phile = phile->next) {
-	Table* t;
-	TableEnt* te;
-
-	(void) printf ("static %sConst char _%s[] = {\n", 
-		       conststr ? conststr : "", phile->table->name);
-
-	for (t = phile->table; t; t = t->next) 
-	    for (te = t->tableent; te; te = te->next)
-		WriteSourceLine (te, abi, t->next ? 1 : 0);
-	(void) printf ("%s\n\n", "};");
-
-	(void) printf ("%sConst char* %s(index)\n    int index;\n{\n    return &_%s[index];\n}\n\n",
-		       conststr ? conststr : "", 
-		       phile->table->name, phile->table->name);
-    }
-}
-
-static void ArrayperWriteSource (int abi)
-{
-    File* phile;
-    static int done_atom;
-
-    for (phile = file; phile; phile = phile->next) {
-	Table* t;
-	TableEnt* te;
-
-	for (t = phile->table; t; t = t->next) 
-	    for (te = t->tableent; te; te = te->next) {
-		if (strcmp (te->left, "RAtom") == 0) {
-		    if (done_atom) return;
-		    done_atom = 1;
-		}
-		(void) printf ("%s %sConst char %s%s[] = \"%s\";\n",
-			       externdefstr, conststr ? conststr : "",
-			       prefixstr, 
-			       te->left, te->right);
-	    }
-    }
-}
-
-static void DefaultWriteSource (int abi)
-{
-    File* phile;
-
-    for (phile = file; phile; phile = phile->next) {
-	Table* t;
-	TableEnt* te;
-
-	(void) printf (const_string, externdefstr, conststr ? conststr : "",
-		       phile->table->name);
-
-	for (t = phile->table; t; t = t->next) 
-	    for (te = t->tableent; te; te = te->next)
-		WriteSourceLine (te, abi, t->next ? 1 : 0);
-	(void) printf ("%s\n\n", "};");
-    }
-}
-
-static void WriteSource(char *tagline, int abi)
-{
-    static void (*sourceproc[])(int) = { 
-	DefaultWriteSource, ArrayperWriteSource,
-	IntelABIWriteSource, IntelABIBCWriteSource,
-	DefaultWriteSource, FunctionWriteSource };
-
-    FILE* tmpl;
-
-    if (ctmplstr) {
-	tmpl = ifopen (ctmplstr, "r");
-
-	if (tmpl) CopyTmplProlog (tmpl, stdout);
-	else {
-	    (void) fprintf (stderr, "Expected template %s, not found\n",
-			    ctmplstr);
-	    exit (1);
-	}
-    } else
-	tmpl = NULL;
-
-
-    (void) printf ("%s\n%s\n/* %s ABI version -- Do not edit */\n", 
-		   "/* $Xorg: makestrs.c,v 1.6 2001/02/09 02:03:17 xorgcvs Exp $ */",
-		   "/* This file is automatically generated. */",
-		   abistring[abi]);
-
-    if (tagline) (void) printf ("/* %s */\n\n", tagline);
-
-    (*sourceproc[abi])(abi);
-
-    if (tmpl) CopyTmplEpilog (tmpl, stdout);
-}
-
-static void DoLine(char *buf)
-{
-#define X_NO_TOKEN 0
-#define X_FILE_TOKEN 1
-#define X_TABLE_TOKEN 2
-#define X_PREFIX_TOKEN 3
-#define X_FEATURE_TOKEN 4
-#define X_EXTERNREF_TOKEN 5
-#define X_EXTERNDEF_TOKEN 6
-#define X_CTMPL_TOKEN 7
-#define X_HTMPL_TOKEN 8
-#define X_CONST_TOKEN 9
-
-    int token;
-    char lbuf[1024];
-    static char* file_str = "#file";
-    static char* table_str = "#table";
-    static char* prefix_str = "#prefix";
-    static char* feature_str = "#feature";
-    static char* externref_str = "#externref";
-    static char* externdef_str = "#externdef";
-    static char* ctmpl_str = "#ctmpl";
-    static char* htmpl_str = "#htmpl";
-    static char* const_str = "#const";
-
-    if (strncmp (buf, file_str, strlen (file_str)) == 0) 
-	token = X_FILE_TOKEN;
-    else if (strncmp (buf, table_str, strlen (table_str)) == 0) 
-	token = X_TABLE_TOKEN;
-    else if (strncmp (buf, prefix_str, strlen (prefix_str)) == 0) 
-	token = X_PREFIX_TOKEN;
-    else if (strncmp (buf, feature_str, strlen (feature_str)) == 0) 
-	token = X_FEATURE_TOKEN;
-    else if (strncmp (buf, externref_str, strlen (externref_str)) == 0) 
-	token = X_EXTERNREF_TOKEN;
-    else if (strncmp (buf, externdef_str, strlen (externdef_str)) == 0) 
-	token = X_EXTERNDEF_TOKEN;
-    else if (strncmp (buf, ctmpl_str, strlen (ctmpl_str)) == 0) 
-	token = X_CTMPL_TOKEN;
-    else if (strncmp (buf, htmpl_str, strlen (htmpl_str)) == 0) 
-	token = X_HTMPL_TOKEN;
-    else if (strncmp (buf, const_str, strlen (const_str)) == 0) 
-	token = X_CONST_TOKEN;
-    else
-        token = X_NO_TOKEN;
-
-    switch (token) {
-    case X_FILE_TOKEN:
-	{
-	    File* phile;
-
-	    if ((phile = (File*) malloc (sizeof(File))) == NULL) 
-		exit(1);
-	    if ((phile->name = malloc (strlen (buf + strlen (file_str)) + 1)) == NULL) 
-		exit(1);
-	    (void) strcpy (phile->name, buf + strlen (file_str) + 1);
-	    phile->table = NULL;
-	    phile->tablecurrent = NULL;
-	    phile->tabletail = &phile->table;
-	    phile->next = NULL;
-	    phile->tmpl = NULL;
-
-	    *filetail = phile;
-	    filetail = &phile->next;
-	    filecurrent = phile;
-	}
-	break;
-    case X_TABLE_TOKEN:
-	{
-	    Table* table;
-	    if ((table = (Table*) malloc (sizeof(Table))) == NULL) 
-		exit(1);
-	    if ((table->name = malloc (strlen (buf + strlen (table_str)) + 1)) == NULL) 
-		exit(1);
-	    (void) strcpy (table->name, buf + strlen (table_str) + 1);
-	    if (solaris_abi_names) {
-		if (strcmp(table->name, "XtStringsR6") == 0) {
-		    strcpy(table->name, "XtR6Strings");
-		} else if (strcmp(table->name, "XtShellStringsR6") == 0) {
-		    strcpy(table->name, "XtR6ShellStrings");
-		}
-	    }
-	    table->tableent = NULL;
-	    table->tableentcurrent = NULL;
-	    table->tableenttail = &table->tableent;
-	    table->next = NULL;
-	    table->offset = 0;
-
-	    *filecurrent->tabletail = table;
-	    filecurrent->tabletail = &table->next;
-	    filecurrent->tablecurrent = table;
-	}
-	break;
-    case X_PREFIX_TOKEN:
-	if ((prefixstr = malloc (strlen (buf + strlen (prefix_str)) + 1)) == NULL) 
-	    exit(1);
-	(void) strcpy (prefixstr, buf + strlen (prefix_str) + 1);
-	break;
-    case X_FEATURE_TOKEN:
-	if ((featurestr = malloc (strlen (buf + strlen (feature_str)) + 1)) == NULL) 
-	    exit(1);
-	(void) strcpy (featurestr, buf + strlen (feature_str) + 1);
-	break;
-    case X_EXTERNREF_TOKEN:
-	if ((externrefstr = malloc (strlen (buf + strlen (externref_str)) + 1)) == NULL) 
-	    exit(1);
-	(void) strcpy (externrefstr, buf + strlen (externref_str) + 1);
-	break;
-    case X_EXTERNDEF_TOKEN:
-	if ((externdefstr = malloc (strlen (buf + strlen (externdef_str)) + 1)) == NULL) 
-	    exit(1);
-	(void) strcpy (externdefstr, buf + strlen (externdef_str) + 1);
-	break;
-    case X_CTMPL_TOKEN:
-	if ((ctmplstr = malloc (strlen (buf + strlen (ctmpl_str)) + 1)) == NULL) 
-	    exit(1);
-	(void) strcpy (ctmplstr, buf + strlen (ctmpl_str) + 1);
-	break;
-    case X_HTMPL_TOKEN:
-	if ((filecurrent->tmpl = ifopen (buf + strlen (htmpl_str) + 1, "r")) == NULL) {
-	    (void) fprintf (stderr, 
-			    "Expected template %s, not found\n", htmpl_str);
-	    exit (1);
-	}
-	break;
-    case X_CONST_TOKEN:
-	if ((conststr = malloc (strlen (buf + strlen (const_str)) + 1)) == NULL)
-	    exit(1);
-	(void) strcpy (conststr, buf + strlen (const_str) + 1);
-	break;
-    default:
-	{
-	    char* right;
-	    TableEnt* tableent;
-	    int llen;
-	    int rlen;
-	    int len;
-
-	    if ((right = index(buf, ' ')))
-		*right++ = 0;
-	    else
-		right = buf + 1;
-	    if (buf[0] == 'H') {
-		strcpy (lbuf, prefixstr);
-		strcat (lbuf, right);
-		right = lbuf;
-	    }
-
-	    llen = len = strlen(buf) + 1;
-	    rlen = strlen(right) + 1;
-	    if (right != buf + 1) len += rlen;
-	    if ((tableent = (TableEnt*)malloc(sizeof(TableEnt) + len)) == NULL)
-		exit(1);
-	    tableent->left = (char *)(tableent + 1);
-	    strcpy(tableent->left, buf);
-	    if (llen != len) {
-		tableent->right = tableent->left + llen;
-		strcpy(tableent->right, right);
-	    } else {
-		tableent->right = tableent->left + 1;
-	    }
-	    tableent->next = NULL;
-
-	    *filecurrent->tablecurrent->tableenttail = tableent;
-	    filecurrent->tablecurrent->tableenttail = &tableent->next;
-	    filecurrent->tablecurrent->tableentcurrent = tableent;
-	}
-	break;
-    }
-}
-
-static void IntelABIIndexEntries (File *file)
-{
-    Table* t;
-    TableEnt* te;
-
-    for (t = file->table; t; t = t->next)
-	for (te = t->tableent; te; te = te->next) {
-	    te->offset = t->offset;
-	    t->offset += strlen (te->right);
-	    t->offset++;
-    }
-}
-
-static void DefaultIndexEntries (File *file)
-{
-    Table* t;
-    TableEnt* te;
-    int offset = 0;
-
-    for (t = file->table; t; t = t->next)
-	for (te = t->tableent; te; te = te->next) {
-	    te->offset = offset;
-	    offset += strlen (te->right);
-	    offset++;
-    }
-}
-
-static void IndexEntries (File *file, int abi)
-{
-    switch (abi) {
-    case X_SPARC_ABI:
-	break;
-    case X_INTEL_ABI:
-    case X_INTEL_ABI_BC:
-	IntelABIIndexEntries (file);
-	break;
-    default:
-	DefaultIndexEntries (file);
-	break;
-    }
-}
-
-static char* DoComment (char *line)
-{
-    char* tag;
-    char* eol;
-    char* ret;
-    int len;
-
-    /* assume that the first line with two '$' in it is the RCS tag line */
-    if ((tag = index (line, '$')) == NULL) return NULL;
-    if ((eol = index (tag + 1, '$')) == NULL) return NULL;
-    len = eol - tag;
-    if ((ret = malloc (len)) == NULL)
-	exit (1);
-    (void) strncpy (ret, tag + 1, len - 1);
-    ret[len - 2] = 0;
-    return ret;
-}
-
-int main(int argc, char *argv[])
-{
-    int len, i;
-    char* tagline = NULL;
-    File* phile;
-    FILE *f;
-    char buf[1024];
-    int abi = 
-#ifndef ARRAYPERSTR
-	X_DEFAULT_ABI;
-#else
-	X_ARRAYPER_ABI;
-#endif
-
-    f = stdin;
-    if (argc > 1) {
-	for (i = 1; i < argc; i++) {
-	    if (strcmp (argv[i], "-f") == 0) {
-		if (++i < argc)
-		    f = fopen (argv[i], "r");
-		else
-		    return 1;
-	    }
-	    if (strcmp (argv[i], "-i") == 0) {
-		if (++i < argc)
-		    includedir = argv[i];
-		else
-		    return 1;
-	    }
-	    if (strcmp (argv[i], "-sparcabi") == 0)
-		abi = X_SPARC_ABI;
-	    if (strcmp (argv[i], "-intelabi") == 0)
-		abi = X_INTEL_ABI;
-	    if (strcmp (argv[i], "-functionabi") == 0)
-		abi = X_FUNCTION_ABI;
-	    if (strcmp (argv[i], "-earlyR6bc") == 0 && abi == X_INTEL_ABI)
-		abi = X_INTEL_ABI_BC;
-	    if (strcmp (argv[i], "-arrayperabi") == 0)
-		abi = X_ARRAYPER_ABI;
-#ifdef ARRAYPERSTR
-	    if (strcmp (argv[i], "-defaultabi") == 0)
-		abi = X_DEFAULT_ABI;
-#endif
-	    if (strcmp (argv[i], "-solarisabinames") == 0)
-		solaris_abi_names = TRUE;
-	}
-    }
-
-    if (f == NULL) return 1;
-    while (fgets(buf, sizeof buf, f)) {
-	if (!buf[0] || buf[0] == '\n') 
-	    continue;
-	if (buf[0] == '!') {
-	    if (tagline) continue;
-	    tagline = DoComment (buf);
-	    continue;
-	}
-	if (buf[(len = strlen (buf) - 1)] == '\n') buf[len] = '\0';
-	DoLine(buf);
-    }
-    for (phile = file; phile; phile = phile->next) {
-	if (abi != X_ARRAYPER_ABI) IndexEntries (phile, abi);
-	WriteHeader (tagline, phile, abi);
-    }
-    WriteSource(tagline, abi);
-    return 0;
-}
-
diff --git a/nx-X11/config/util/makestrs.man b/nx-X11/config/util/makestrs.man
deleted file mode 100644
index cd9684114..000000000
--- a/nx-X11/config/util/makestrs.man
+++ /dev/null
@@ -1,219 +0,0 @@
-.\" $Xorg: makestrs.man,v 1.4 2001/02/09 02:03:17 xorgcvs Exp $
-.\" Copyright (c) 1993, 1994, 1998 The Open Group
-.\" 
-.\" Permission to use, copy, modify, distribute, and sell this software and its
-.\" documentation for any purpose is hereby granted without fee, provided that
-.\" the above copyright notice appear in all copies and that both that
-.\" copyright notice and this permission notice appear in supporting
-.\" documentation.
-.\" 
-.\" The above copyright notice and this permission notice shall be included in
-.\" all copies or substantial portions of the Software.
-.\" 
-.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-.\" IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-.\" FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL 
-.\" THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 
-.\" WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF 
-.\" OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 
-.\" SOFTWARE.
-.\" 
-.\" Except as contained in this notice, the name of The Open Group shall not 
-.\" be used in advertising or otherwise to promote the sale, use or other 
-.\" dealing in this Software without prior written authorization from The
-.\" Open Group.
-.\"
-.\" $XFree86: xc/config/util/makestrs.man,v 3.8 2001/12/14 19:53:22 dawes Exp $
-.\"
-.TH MAKESTRS 1 __xorgversion__
-.SH NAME
-makestrs \- makes string table C source and header(s)
-.SH SYNOPSIS
-.B makestrs [-f source] [-i includedir] [-abioptions ...]
-.SH DESCRIPTION
-The
-.I makestrs
-command creates string table C source files and headers.
-If
-.I -f
-.I source
-is not specified
-.I makestrs
-will read from
-.I stdin.
-The C source file is always written to
-.I stdout.
-.I makestrs
-creates one or more C header files as specified in the source file.
-The following options may be specified:
-.I -sparcabi,
-.I -intelabi,
-.I -functionabi,
-.I -arrayperabi,
-and
-.I -defaultabi.
-.LP
-.I -sparcabi 
-is used on SPARC platforms conforming to the SPARC 
-Compliance Definition, i.e. SVR4/Solaris.
-.LP
-.I -intelabi 
-is used on Intel platforms conforming to the System 
-V Application Binary Interface, i.e. SVR4.
-.LP
-.I -earlyR6abi 
-may be used in addition to 
-.I -intelabi 
-for situations 
-where the vendor wishes to maintain binary compatibility between 
-X11R6 public-patch 11 (and earlier) and X11R6 public-patch 12 (and later).
-.LP
-.I -functionabi 
-generates a functional abi to the string table. This 
-mechanism imposes a severe performance penalty and it's recommended 
-that you not use it.
-.LP
-.I -arrayperabi 
-results in a separate array for each string. This is 
-the default behavior if makestrs was compiled with -DARRAYPERSTR 
-(it almost never is).
-.LP
-.I -defaultabi 
-forces the generation of the "normal" string table even 
-if makestrs was compiled with -DARRAYPERSTR. Since makestrs is almost 
-never compiled with -DARRAYPERSTR this is the default behavior if 
-no abioptions are specified.
-.LP
-.I -i includedir
-forces the reading of templates from the includedir instead of the local 
-directory. This is useful to have separate source and build directories. 
-.SH SYNTAX
-The syntax for string-list file is (items in square brackets are optional):
-.RS 4
-\&#prefix <text>
-.RE
-.RS 4
-\&#feature <text>
-.RE
-.RS 4
-\&#externref <text>
-.RE
-.RS 4
-\&#externdef [<text>]
-.RE
-.RS 4
-[#ctempl <text>]
-.RE
-.LP
-.RS 4
-\&#file <filename>
-.RE
-.RS 4
-\&#table <tablename>
-.RE
-.RS 4
-[#htempl]
-.RE
-.RS 4
-<text>
-.RE
-.RS 4
-...
-.RE
-.RS 4
-<text>
-.RE
-.RS 4
-[#table <tablename>
-.RE
-.RS 4
-<text>
-.RE
-.RS 4
-...
-.RE
-.RS 4
-<text>
-.RE
-.RS 4
- ...
-.RE
-.RS 4
-\&#table <tablename>
-.RE
-.RS 4
- ...]
-.RE
-.RS 4
-[#file <filename>
-.RE
-.RS 4
- ...]
-.RE
-.LP
-In words you may have one or more #file directives. Each #file may have
-one or more #table directives.
-.LP
-The #prefix directive determines the string that makestr will prefix
-to each definition.
-.LP
-The #feature directive determines the string that makestr will use
-for the feature-test macro, e.g. X[TM]STRINGDEFINES.
-.LP
-The #externref directive determines the string that makestr will use
-for the extern clause, typically this will be "extern" but Motif wants
-it to be "externalref"
-.LP
-The #externdef directive determines the string that makestr will use
-for the declaration, typically this will be the null string (note that
-makestrs requires a trailing space in this case, i.e. "#externdef "),
-and Motif will use "externaldef(_xmstrings).
-.LP
-The #ctmpl directive determines the name of the file used as a template
-for the C source file that is generated
-.LP
-Each #file <filename> directive will result in a corresponding header 
-file by that name containing the appropriate definitions as specified
-by command line options. A single C source file containing the
-declarations for the definitions in all the headers will be printed
-to stdout.
-.LP
-The #htmpl directive determines the name of the file used as a template
-for the C header file that is generated.
-.LP
-Each #table <tablename> directive will be processed in accordance with
-the ABI. On most platforms all tables will be catenated into a single
-table with the name of the first table for that file. To conform to
-the Intel ABI separate tables will be generated with the names indicated.
-.LP
-The template files specified by the #ctmpl and #htmpl directives
-are processed by copying line for line from the template file to
-the appropriate output file. The line containing the string
-.I <<<STRING_TABLE_GOES_HERE>>>
-is not copied to the output file. The appropriate data is then
-copied to the output file and then the remainder of the template
-file is copied to the output file.
-.SH BUGS
-makestrs is not very forgiving of syntax errors. Sometimes you need
-a trailing space after # directives, other times they will mess you
-up. No warning messages are emitted.
-.SH SEE ALSO
-SPARC Compliance Definition 2.2., SPARC International Inc.,
-535 Middlefield Road, Suite 210, Menlo Park, CA  94025
-.LP
-System V Application Binary Interface, Third Edition, 
-ISBN 0-13-100439-5
-UNIX Press, PTR Prentice Hall, 113 Sylvan Avenue, Englewood Cliffs, 
-NJ  07632
-.LP
-System V Application Binary Interface, Third Edition, Intel386
-Architecture Processor Supplement
-ISBN 0-13-104670-5
-UNIX Press, PTR Prentice Hall, 113 Sylvan Avenue, Englewood Cliffs, 
-NJ  07632
-.LP
-System V Application Binary Interface, Third Edition, SPARC
-Architecture Processor Supplement
-ISBN 0-13-104696-9
-UNIX Press, PTR Prentice Hall, 113 Sylvan Avenue, Englewood Cliffs, 
-NJ  07632
diff --git a/nx-X11/config/util/mdepend.cpp b/nx-X11/config/util/mdepend.cpp
deleted file mode 100644
index 35cab0b22..000000000
--- a/nx-X11/config/util/mdepend.cpp
+++ /dev/null
@@ -1,286 +0,0 @@
-XCOMM!/bin/sh
-XCOMM
-XCOMM $Xorg: mdepend.cpp,v 1.3 2000/08/17 19:41:52 cpqbld Exp $
-XCOMM $XdotOrg: xc/config/util/mdepend.cpp,v 1.4 2005/08/26 05:01:37 daniels Exp $
-XCOMM
-XCOMM	Do the equivalent of the 'makedepend' program, but do it right.
-XCOMM
-XCOMM	Usage:
-XCOMM
-XCOMM	makedepend [cpp-flags] [-w width] [-s magic-string] [-f makefile]
-XCOMM	  [-o object-suffix] [-v] [-a] [-cc compiler] [-d dependencyflag]
-XCOMM
-XCOMM	Notes:
-XCOMM
-XCOMM	The C compiler used can be overridden with the environment
-XCOMM	variable "CC" or the command line flag -cc.
-XCOMM
-XCOMM	The "-v" switch of the "makedepend" program is not supported.
-XCOMM
-XCOMM
-XCOMM	This script should
-XCOMM	work on both USG and BSD systems.  However, when System V.4 comes out,
-XCOMM	USG users will probably have to change "silent" to "-s" instead of
-XCOMM	"-" (at least, that is what the documentation implies).
-XCOMM
-XCOMM $XFree86: xc/config/util/mdepend.cpp,v 3.9 2001/04/26 20:55:10 dawes Exp $
-XCOMM
-
-CC=PREPROC
-
-silent='-'
-
-TMP=`pwd`/.mdep$$
-
-rm -rf ${TMP}
-if ! mkdir -p ${TMP}; then
-  echo "$0: cannot create ${TMP}, exit." >&2
-fi
-
-CPPCMD=${TMP}/a
-DEPENDLINES=${TMP}/b
-TMPMAKEFILE=${TMP}/c
-MAGICLINE=${TMP}/d
-ARGS=${TMP}/e
-
-trap "rm -rf ${TMP}; exit 1" 1 2 15
-trap "rm -rf ${TMP}; exit 0" 1 2 13
-
-echo " \c" > $CPPCMD
-if [ `wc -c < $CPPCMD` -eq 1 ]
-then
-    c="\c"
-    n=
-else
-    c=
-    n="-n"
-fi
-
-echo $n "$c" >$ARGS
-
-files=
-makefile=
-magic_string='# DO NOT DELETE'
-objsuffix='.o'
-width=78
-endmarker=""
-verbose=n
-append=n
-compilerlistsdepends=n
-
-while [ $# != 0 ]
-do
-    if [ "$endmarker"x != x ] && [ "$endmarker" = "$1" ]; then
-	endmarker=""
-    else
-	case "$1" in
-	    -D*|-I*|-U*)
-		echo $n " '$1'$c" >> $ARGS
-		;;
-
-	    -g|-O)	# ignore so we can just pass $(CFLAGS) in
-		;;
-
-	    *)
-		if [ "$endmarker"x = x ]; then
-		    case "$1" in 	
-			-w)
-			    width="$2"
-			    shift
-			    ;;
-			-s)
-			    magic_string="$2"
-			    shift
-			    ;;
-			-f*)
-			    if [ "$1" = "-f-" ]; then
-				makefile="-"
-			    elif [ "$1" = "-f" ]; then
-				makefile="$2"
-				shift
-			    else
-				echo "$1" | sed 's/^\-f//' >${TMP}arg
-				makefile="`cat ${TMP}arg`"
-				rm -f ${TMP}arg
-			    fi
-			    ;;
-			-o)
-			    objsuffix="$2"
-			    shift
-			    ;;
-			
-			--*)
-			    echo "$1" | sed 's/^\-\-//' >${TMP}end
-			    endmarker="`cat ${TMP}end`"
-			    rm -f ${TMP}end
-			    if [ "$endmarker"x = x ]; then
-				endmarker="--"
-			    fi
-			    ;;
-			-v)
-			    verbose="y"
-			    ;;
-
-			-a)
-			    append="y"
-			    ;;
-
-			-cc)
-			    CC="$2"
-			    shift
-			    ;;
-
-			# Flag to tell compiler to output dependencies directly
-			# For example, with Sun compilers, -xM or -xM1 or
-			# with gcc, -M
-		        -d)
-			    compilerlistsdepends="y"
-			    compilerlistdependsflag="$2"
-			    shift
-			    ;;
-
-			-*)
-			    echo "Unknown option '$1' ignored" 1>&2
-			    ;;
-			*)
-			    files="$files $1"
-			    ;;
-		    esac
-		fi
-		;;
-	esac
-    fi
-    shift
-done
-echo ' $*' >> $ARGS
-
-if [ "$compilerlistsdepends"x = "y"x ] ; then
-  CC="$CC $compilerlistdependsflag"
-fi
-
-echo "#!/bin/sh" > $CPPCMD
-echo "exec $CC `cat $ARGS`" >> $CPPCMD
-chmod +x $CPPCMD
-rm $ARGS
-
-case "$makefile" in
-    '')
-	if [ -r makefile ]
-	then
-	    makefile=makefile
-	elif [ -r Makefile ]
-	then
-	    makefile=Makefile
-	else
-	    echo 'no makefile or Makefile found' 1>&2
-	    exit 1
-	fi
-	;;
-    -)
-	makefile=$TMPMAKEFILE
-	;;
-esac
-
-if [ "$verbose"x = "y"x ]; then 
-    cat $CPPCMD
-fi
-
-echo '' > $DEPENDLINES
-
-if [ "$compilerlistsdepends"x = "y"x ] ; then
-    for i in $files
-    do
-	$CPPCMD $i >> $DEPENDLINES
-    done
-else
-for i in $files
-do
-    $CPPCMD $i \
-      | sed -n "/^#/s;^;$i ;p"
-done \
-  | sed -e 's|/[^/.][^/]*/\.\.||g' -e 's|/\.[^.][^/]*/\.\.||g' \
-    -e 's|"||g' -e 's| \./| |' \
-  | awk '{
-	if ($1 != $4  &&  $2 != "#ident" && $2 != "#pragma")
-	    {
-	    numparts = split( $1, ofileparts, "\." )
-	    ofile = ""
-	    for ( i = 1; i < numparts; i = i+1 )
-		{
-		if (i != 1 )
-		    ofile = ofile "."
-		ofile = ofile ofileparts[i]
-		}
-	    print ofile "'"$objsuffix"'", $4
-	    }
-	}' \
-  | sort -u \
-  | awk '
-	    {
-	    newrec = rec " " $2
-	    if ($1 != old1)
-		{
-		old1 = $1
-		if (rec != "")
-		    print rec
-		rec = $1 ": " $2
-		}
-	    else if (length (newrec) > '"$width"')
-		{
-		print rec
-		rec = $1 ": " $2
-		}
-	    else
-		rec = newrec
-	    }
-	END \
-	    {
-	    if (rec != "")
-		print rec
-	    }' \
-  | egrep -v '^[^:]*:[ 	]*$' >> $DEPENDLINES
-fi
-
-trap "" 1 2 13 15	# Now we are committed
-case "$makefile" in
-    $TMPMAKEFILE)
-	;;
-    *)
-	rm -f $makefile.bak
-	cp $makefile $makefile.bak
-	echo "Appending dependencies to $makefile"
-	;;
-esac
-
-XCOMM
-XCOMM If not -a, append the magic string and a blank line so that
-XCOMM /^$magic_string/+1,\$d can be used to delete everything from after
-XCOMM the magic string to the end of the file.  Then, append a blank
-XCOMM line again and then the dependencies.
-XCOMM
-if [ "$append" = "n" ]
-then
-    cat >> $makefile << END_OF_APPEND
-
-$magic_string
-
-END_OF_APPEND
-    ed $silent $makefile << END_OF_ED_SCRIPT
-/^$magic_string/+1,\$d
-w
-q
-END_OF_ED_SCRIPT
-    echo '' >>$makefile
-fi
-
-cat $DEPENDLINES >>$makefile
-
-case "$makefile" in
-    $TMPMAKEFILE)
-	cat $TMPMAKEFILE
-	;;
-
-esac
-
-rm -rf ${TMP}*
-exit 0
diff --git a/nx-X11/config/util/mergelib.cpp b/nx-X11/config/util/mergelib.cpp
deleted file mode 100644
index 1c7cc6470..000000000
--- a/nx-X11/config/util/mergelib.cpp
+++ /dev/null
@@ -1,105 +0,0 @@
-XCOMM!/bin/sh
-XCOMM
-XCOMM $Xorg: mergelib.cpp,v 1.4 2001/02/09 02:03:17 xorgcvs Exp $
-XCOMM 
-XCOMM Copyright (c) 1989, 1998 The Open Group
-XCOMM 
-XCOMM Permission to use, copy, modify, distribute, and sell this software and 
-XCOMM its documentation for any purpose is hereby granted without fee, provided
-XCOMM that the above copyright notice appear in all copies and that both that
-XCOMM copyright notice and this permission notice appear in supporting
-XCOMM documentation.
-XCOMM 
-XCOMM The above copyright notice and this permission notice shall be included in
-XCOMM all copies or substantial portions of the Software.
-XCOMM 
-XCOMM THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-XCOMM IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-XCOMM FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-XCOMM OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-XCOMM AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-XCOMM CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-XCOMM 
-XCOMM Except as contained in this notice, the name of The Open Group shall not be
-XCOMM used in advertising or otherwise to promote the sale, use or other dealings
-XCOMM in this Software without prior written authorization from The Open Group.
-XCOMM 
-XCOMM Author:  Jim Fulton, MIT X Consortium
-XCOMM 
-XCOMM mergelib - merge one library into another; this is commonly used by X
-XCOMM     to add the extension library into the base Xlib.
-XCOMM
-
-usage="usage:  $0  to-library from-library [object-filename-prefix]"
-objprefix=_
-
-case $# in
-    2) ;;
-    3) objprefix=$3 ;;
-    *) echo "$usage" 1>&2; exit 1 ;;
-esac
-
-tolib=$1
-fromlib=$2
-
-if [ ! -f $fromlib ]; then
-    echo "$0:  no such from-library $fromlib" 1>&2
-    exit 1
-fi
-
-if [ ! -f $tolib ]; then
-    echo "$0:  no such to-library $tolib" 1>&2
-    exit 1
-fi
-
-
-XCOMM
-XCOMM Create a temp directory, and figure out how to reference the 
-XCOMM object files from it (i.e. relative vs. absolute path names).
-XCOMM
-
-tmpdir=tmp.$$
-origdir=..
-
-XCOMM Remove directory if we fail
-trap "rm -rf $tmpdir; exit 1" 1 2 15
-trap "rm -rf $tmpdir; exit 0" 1 2 13
-
-mkdir $tmpdir
-
-XCOMM Security: if $tmpdir exists before mkdir exit immediately
-if [ $? -gt 0 -o ! -d $tmpdir ]; then
-    echo "$0:  unable to create temporary directory $tmpdir" 1>&2
-    exit 1
-fi
-
-case "$fromlib" in
-    /?*) upfrom= ;;
-    *)  upfrom=../ ;;
-esac
-
-case "$tolib" in
-    /?*) upto= ;;
-    *)  upto=../ ;;
-esac
-
-
-XCOMM
-XCOMM In the temp directory, extract all of the object files and prefix
-XCOMM them with some symbol to avoid name clashes with the base library.
-XCOMM
-cd $tmpdir || exit 1
-ar x ${upfrom}$fromlib
-for i in *.o; do
-    mv $i ${objprefix}$i
-done
-
-
-XCOMM
-XCOMM Merge in the object modules, ranlib (if appropriate) and cleanup
-XCOMM
-ARCMD ${upto}$tolib *.o
-RANLIB ${upto}$tolib
-cd $origdir
-rm -rf $tmpdir
-
diff --git a/nx-X11/config/util/mergelib.man b/nx-X11/config/util/mergelib.man
deleted file mode 100644
index 768516648..000000000
--- a/nx-X11/config/util/mergelib.man
+++ /dev/null
@@ -1,28 +0,0 @@
-.\" $XFree86$
-.\" shorthand for double quote that works everywhere.
-.ds q \N'34'
-.TH MERGELIB 1 __xorgversion__
-.SH NAME
-mergelib \- merge one library into another
-.SH SYNOPSIS
-.B mergelib
-.I to-library
-.I from-library
-.RI [ object-filename-prefix ]
-.SH DESCRIPTION
-The
-.I mergelib
-program merges objects from one library into another.
-The names of object files in
-.I from-library
-will be prefixed by
-.I object-filename-prefix
-(\*q_\*q by default) to avoid name clashes.
-The merged library will be left in
-.IR to-library .
-.SH AUTHOR
-Jim Fulton wrote the
-.I mergelib
-program for the X Consortium.
-.PP
-Colin Watson wrote this manual page, originally for the Debian Project.
diff --git a/nx-X11/config/util/mkdirhier.c b/nx-X11/config/util/mkdirhier.c
deleted file mode 100644
index 61207b541..000000000
--- a/nx-X11/config/util/mkdirhier.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* $Xorg: mkdirhier.c,v 1.4 2001/02/09 02:03:17 xorgcvs Exp $ */
-/*
-
-Copyright (C) 1996, 1998 The Open Group
-
-Permission to use, copy, modify, distribute, and sell this software and its
-documentation for any purpose is hereby granted without fee, provided that
-the above copyright notice appear in all copies and that both that
-copyright notice and this permission notice appear in supporting
-documentation.
-
-The above copyright notice and this permission notice shall be included
-in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
-OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the name of The Open Group shall
-not be used in advertising or otherwise to promote the sale, use or
-other dealings in this Software without prior written authorization
-from The Open Group.
-
-*/
-/* $XFree86$ */
-
-/*
- * Simple mkdirhier program for Windows NT
- */
-#include <sys/types.h>
-#include <sys/stat.h>
-#ifndef __UNIXOS2__
-#include <direct.h>
-#else
-#include <dirent.h>
-#endif
-#include <stdlib.h>
-#include <string.h>
-
-char *
-next_sep(char *path)
-{
-    while (*path)
-	if (*path == '/' || *path == '\\')
-	    return path;
-	else
-	    path++;
-    return NULL;
-}
-
-int
-main(int argc, char *argv[])
-{
-    char *dirname, *next, *prev;
-    char buf[1024];
-    struct _stat sb;
-
-    if (argc < 2)
-	exit(1);
-    dirname = argv[1];
-
-    prev = dirname;
-    while (next = next_sep(prev)) {
-	strncpy(buf, dirname, next - dirname);
-	buf[next - dirname] = '\0';
-	/* if parent dir doesn't exist yet create it */
-	if (_stat(buf, &sb))
-	    _mkdir(buf);	/* no error checking to avoid barfing on C: */
-	prev = next + 1;
-    }
-    if (_mkdir(dirname) == -1) {
-	perror("mkdirhier failed");
-	exit(1);
-    }
-    exit(0);
-}
diff --git a/nx-X11/config/util/mkdirhier.cmd b/nx-X11/config/util/mkdirhier.cmd
deleted file mode 100644
index 9ee8fa791..000000000
--- a/nx-X11/config/util/mkdirhier.cmd
+++ /dev/null
@@ -1,54 +0,0 @@
-/* OS/2 REXX SCRIPT */
-/* $XFree86: xc/config/util/mkdirhier.cmd,v 3.1 1996/02/09 08:18:04 dawes Exp $ */
-
-CALL RxFuncAdd 'SysMkDir', 'RexxUtil', 'SysMkDir'
-
-IF ARG() = 0 THEN DO
-	SAY "mkdirhier: usage: mkdirhier directory ..."
-	EXIT 1
-END
-
-curdir=DIRECTORY()
-drive=DELSTR(curdir,3)
-
-status=""
-PARSE ARG all
-
-DO i=1 TO WORDS(all)
-	direc = TRANSLATE(WORD(all,i),'/','\')
-	SELECT
-	WHEN direc = "" THEN DO
-		SAY "mkdirhier: empty directory name"
-		status=1
-		ITERATE
-		END
-	WHEN POS('0a'x,direc) > 0 THEN DO
-		SAY "mkdirhier: directory name contains a newline: '" direc "'"
-		status=1
-		ITERATE
-		END
-	OTHERWISE NOP
-	END
-	IF POS(":",direc) = 0 THEN direc = INSERT(drive,direc)
-
-	dirbuf.0 = direc
-	DO k=1 TO 1000
-		direc1 = STRIP(direc,"t","/")
-		dpath1 = FILESPEC("path",direc1)
-		dirbuf.k=FILESPEC("drive",direc1)||STRIP(dpath1,"t","/")
-		IF POS("/",dirbuf.k) = 0 THEN LEAVE k
-		direc=dirbuf.k
-	END
-	DO m=k-1 TO 0 BY -1
-		dospath = TRANSLATE(dirbuf.m,'\','/')
-		targetdir=DIRECTORY(dospath)
-		IF targetdir = dospath THEN
-			NOP
-		ELSE
-			CALL SysMkDir(dospath)
-		CALL DIRECTORY curdir
-	END
-END
-
-
-EXIT status
diff --git a/nx-X11/config/util/mkdirhier.man b/nx-X11/config/util/mkdirhier.man
deleted file mode 100644
index 4ad475e62..000000000
--- a/nx-X11/config/util/mkdirhier.man
+++ /dev/null
@@ -1,42 +0,0 @@
-.\" $Xorg: mkdirhier.man,v 1.4 2001/02/09 02:03:17 xorgcvs Exp $
-.\" Copyright (c) 1993, 1994, 1998 The Open Group
-.\" 
-.\" Permission to use, copy, modify, distribute, and sell this software and its
-.\" documentation for any purpose is hereby granted without fee, provided that
-.\" the above copyright notice appear in all copies and that both that
-.\" copyright notice and this permission notice appear in supporting
-.\" documentation.
-.\" 
-.\" The above copyright notice and this permission notice shall be included in
-.\" all copies or substantial portions of the Software.
-.\" 
-.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-.\" IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-.\" FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL 
-.\" THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 
-.\" WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF 
-.\" OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 
-.\" SOFTWARE.
-.\" 
-.\" Except as contained in this notice, the name of The Open Group shall not 
-.\" be used in advertising or otherwise to promote the sale, use or other 
-.\" dealing in this Software without prior written authorization from The 
-.\" Open Group.
-.\"
-.\" $XFree86: xc/config/util/mkdirhier.man,v 1.2 2001/01/27 18:19:55 dawes Exp $
-.\"
-.TH MKDIRHIER 1 __xorgversion__
-.SH NAME
-mkdirhier \- makes a directory hierarchy
-.SH SYNOPSIS
-.B mkdirhier
-directory ...
-.SH DESCRIPTION
-The
-.I mkdirhier
-command creates the specified directories. Unlike
-.I mkdir
-if any of the parent directories of the specified directory
-do not exist, it creates them as well.
-.SH "SEE ALSO"
-mkdir(1)
diff --git a/nx-X11/config/util/mkdirhier.sh b/nx-X11/config/util/mkdirhier.sh
deleted file mode 100644
index 09b89ee9d..000000000
--- a/nx-X11/config/util/mkdirhier.sh
+++ /dev/null
@@ -1,67 +0,0 @@
-#!/bin/sh
-# $Xorg: mkdirhier.sh,v 1.3 2000/08/17 19:41:53 cpqbld Exp $
-# Courtesy of Paul Eggert
-
-newline='
-'
-IFS=$newline
-
-case ${1--} in
--*) echo >&2 "mkdirhier: usage: mkdirhier directory ..."; exit 1
-esac
-
-status=
-
-for directory
-do
-	case $directory in
-	'')
-		echo >&2 "mkdirhier: empty directory name"
-		status=1
-		continue;;
-	*"$newline"*)
-		echo >&2 "mkdirhier: directory name contains a newline: \`\`$directory''"
-		status=1
-		continue;;
-	///*) prefix=/;; # See Posix 2.3 "path".
-	//*) prefix=//;;
-	/*) prefix=/;;
-	-*) prefix=./;;
-	*) prefix=
-	esac
-
-	IFS=/
-	set x $directory
-	case $2 in
-	    */*)	# IFS parsing is broken
-		IFS=' '
-		set x `echo $directory | tr / ' '`
-		;;
-	esac
-	IFS=$newline
-	shift
-
-	for filename
-	do
-		path=$prefix$filename
-		prefix=$path/
-		shift
-
-		test -d "$path" || {
-			paths=$path
-			for filename
-			do
-				if [ -n "$filename" -a "$filename" != "." ]; then
-					path=$path/$filename
-					paths=$paths$newline$path
-				fi
-			done
-
-			mkdir $paths || status=$?
-
-			break
-		}
-	done
-  done
-
-exit $status
diff --git a/nx-X11/config/util/mkhtmlindex.man b/nx-X11/config/util/mkhtmlindex.man
deleted file mode 100644
index fc8a4276b..000000000
--- a/nx-X11/config/util/mkhtmlindex.man
+++ /dev/null
@@ -1,32 +0,0 @@
-.TH mkhtmlindex 1 __vendorversion__
-.SH NAME
-mkhtmlindex \- generate index files for HTML man pages
-.SH SYNOPSIS
-.B mkhtmlindex
-.I htmlmandir
-.SH DESCRIPTION
-The
-.I mkhtmlindex
-program generates index files for a directory of HTML-formatted manual
-pages.
-It searches for files whose names are of the form \(lqname.1.html\(rq,
-and outputs index files \(lqmanindex1.html\(rq, \(lqmanindex.2.html\(rq,
-and so on, one for each manual volume.
-Empty index files will be removed.
-Names and descriptions are found by scanning the first
-.I <H2>
-section of each page.
-.SH OPTIONS
-.I mkhtmlindex
-takes only one argument: the directory to process.
-.SH NOTES
-This utility is currently rather specific to X manual pages.
-In particular, the format of the index files it outputs is not configurable,
-nor is the HTML formatting it expects of manual pages.
-.SH AUTHOR
-The version of the 
-.I mkhtmlindex
-included in this X.Org Foundation release was originally written 
-by David Dawes wrote as a part of XFree86.
-.PP
-Colin Watson wrote this manual page, originally for the Debian Project.
diff --git a/nx-X11/config/util/mkhtmlindex.pl b/nx-X11/config/util/mkhtmlindex.pl
deleted file mode 100644
index 10030910e..000000000
--- a/nx-X11/config/util/mkhtmlindex.pl
+++ /dev/null
@@ -1,103 +0,0 @@
-#!/usr/bin/perl
-#
-# $XFree86: xc/config/util/mkhtmlindex.pl,v 1.2 2001/03/15 19:02:31 dawes Exp $
-#
-# Copyright © 2000,2001 by VA Linux Systems, Inc.
-#
-# Generate index files for HTML man pages.
-#
-# Author:	David Dawes <dawes@xfree86.org>
-#
-
-#
-# Best viewed with tabs set to 4
-#
-
-if ($#ARGV ne 0) {
-	print STDERR "Usage: mkhtmlindex.pl htmlmandir\n";
-	exit 1;
-}
-
-$dir = $ARGV[0];
-
-if (! -d $dir) {
-	print STDERR "$dir is not a directory\n";
-	exit 1;
-}
-
-@vollist = ("1", "2", "3", "4", "5", "6", "7", "8", "9", "o", "l", "n", "p");
-
-$indexprefix = "manindex";
-
-foreach $vol (@vollist) {
-	$empty = "yes";
-	$indexname="$dir/$indexprefix$vol.html";
-
-	# print "Processing volume $vol\n";
-
-	open(mindex, ">$indexname") || die "Can't create $indexname";
-	opendir(dir, "$dir") || die "Can't open $dir";
-
-	print mindex <<EOF;
-<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
-<HTML>
-<HEAD>
-<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
-<TITLE>X.Org Manual pages: Section $vol</TITLE>
-</HEAD>
-<BODY BGCOLOR="#efefef" TEXT="black" LINK="blue" VLINK="#551A8B" ALINK="red">
-
-<H1>X.Org Manual pages: Section $vol</H1>
-<P>
-<UL>
-EOF
-
-	foreach $file (sort readdir dir) {
-		if ($file =~ "\.$vol\.html") {
-			open(file, "<$dir/$file") || die "Can't open $dir/$file";
-			while (<file>) {
-				chop;
-				if (/^<[hH]2>/) {
-					if (! /<\/[hH]2>$/) {
-						while (<file> && ! /<\/[hH]2>$/) {
-							;
-						}
-					}
-					$heading = "";
-					while (<file>) {
-						if (/^<[hH]2>/) {
-							last;
-						}
-						$heading = "$heading" . "$_";
-					}
-					if ($heading) {
-						undef $empty;
-						$heading =~ s/--/-/;
-						($name, $descr) = split(/-/, $heading, 2);
-						$file =~ /(.*)\.$vol\.html/;
-						$fname = $1;
-						$descr =~ s/<[pP]>//g;
-						print mindex
-							"<LI><A href=\"$file\">$fname</A> - $descr</LI>";
-					}
-					last;
-				}
-			}
-			close file;
-		}
-	}
-
-	print mindex <<EOF;
-</UL>
-<P>
-</BODY>
-</HTML>
-EOF
-
-	close mindex;
-	closedir dir;
-	if (defined $empty) {
-		# print "Removing empty $indexname\n";
-		unlink $indexname;
-	}
-}
diff --git a/nx-X11/config/util/mkhtmlindex.sh b/nx-X11/config/util/mkhtmlindex.sh
deleted file mode 100644
index ab1c894ea..000000000
--- a/nx-X11/config/util/mkhtmlindex.sh
+++ /dev/null
@@ -1,60 +0,0 @@
-#!/bin/sh
-#
-# $XFree86: xc/config/util/mkhtmlindex.sh,v 1.3 2000/08/26 04:30:49 dawes Exp $
-#
-# Copyright © 2000 by Precision Insight, Inc.
-#
-# Generate index files for the HTML man pages
-#
-# Author:	David Dawes <dawes@xfree86.org>
-#
-
-VOLLIST="1 2 3 4 5 6 7 8 9 o l n p"
-INDEX="manindex"
-
-if [ $# != 1 ]; then
-	echo Usage: $0 htmlmandir
-	exit 1
-fi
-
-if [ ! -d $1 ]; then
-	echo $1 is not a directory
-	exit 1
-fi
-
-cd $1
-
-for s in $VOLLIST; do
-	list="`ls *.$s.html 2> /dev/null`" || : # ignore failed glob expansion
-	if [ X"$list" != X ]; then
-		file=$INDEX$s.html
-		rm -f $file
-		cat <<EOF > $file
-<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
-<HTML>
-<HEAD>
-<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
-<TITLE>X.Org Manual pages: Section $s</TITLE>
-</HEAD>
-<BODY BGCOLOR="#efefef" TEXT="black" LINK="blue" VLINK="#551A8B" ALINK="red">
-
-<H1>X.Org Manual pages: Section $s</H1>
-<P>
-<UL>
-EOF
-		for i in $list; do
-			title="`sed -e '/^[^0-9A-Za-z]/d' -e '/^$/' -e '/^Name/d' -e q $i`"
-			name="`echo \"$title\" | sed -e 's/ - .*//'`"
-			desc="`echo \"$title\" | sed -e 's/[^-]* - //' -e 's/<P>//'`"
-			echo "<LI><A href=\"$i\">$name</A> - $desc</LI>" >> $file
-		done
-		cat <<EOF >> $file
-</UL>
-<P>
-</BODY>
-</HTML>
-EOF
-	fi
-done
-
-exit 0
diff --git a/nx-X11/config/util/mkshadow/Imakefile b/nx-X11/config/util/mkshadow/Imakefile
deleted file mode 100644
index e8a879d97..000000000
--- a/nx-X11/config/util/mkshadow/Imakefile
+++ /dev/null
@@ -1,5 +0,0 @@
-XCOMM $Xorg: Imakefile,v 1.3 2000/08/17 19:41:53 cpqbld Exp $
-           SRCS = mkshadow.c savedir.c wildmat.c
-           OBJS = mkshadow.o savedir.o wildmat.o
-
-ComplexProgramTarget(mkshadow)
diff --git a/nx-X11/config/util/mkshadow/README b/nx-X11/config/util/mkshadow/README
deleted file mode 100644
index eea4b8b89..000000000
--- a/nx-X11/config/util/mkshadow/README
+++ /dev/null
@@ -1,38 +0,0 @@
-The mkshadow programs makes a "shadow tree" of a directory tree.
-It logically copies all of the "MASTER" directory into ".".
-However, ordinary files, and RCS/SCCS directories are "copied"
-by creating a sybolic link to the corresponding file in MASTER.
-
-The wildmat.c file is by Rich Salz, and from comp.sources.misc, volume 17.
-The savedir.c file is lightly modified from the version written
-by David MacKenzie for GNU fileutils; the Free Software Foundation
-has graciously agreed to waive their usual copyright so this
-program can be distributed by the X Consortium.
-
-If you have problems compiling savedir.c, try setting the DIRENT make
-variable as suggested in the Makefile.
-
- * Usage: mkshadow [-X exclude_file] [-x exclude_pattern] ... MASTER
- * Makes the current directory be a "shadow copy" of MASTER.
- * Sort of like a recursive copy of MASTER to .
- * However, symbolic links are used instead of actually
- * copying (non-directory) files.
- * Also, directories named RCS or SCCS are shared (with a symbolic link).
- * Warning messages are printed for files (and directories) in .
- * that don't match a corresponding file in MASTER (though
- * symbolic links are silently removed).
- * Also, a warning message is printed for non-directory files
- * under . that are  not symbolic links.
- *
- * Files and directories can be excluded from the sharing
- * with the -X and -x flags. The flag `-x pattern' (or `-xpattern')
- * means that mkshadow should ignore any file whose name matches
- * the pattern. The pattern is a "globbing" pattern, i.e. the
- * characters *?[^-] are interpreted as by the shell.
- * If the pattern contains a '/' is is matched against the complete
- * current path (relative to '.'); otherwise, it is matched
- * against the last component of the path.
- * A `-X filename' flag means to read a set of exclusion patterns
- * from the named file, one pattern to a line.
-
-Author: Per Bothner. bothner@cygnus.com. November 1990, 1993.
diff --git a/nx-X11/config/util/mkshadow/mkshadow.c b/nx-X11/config/util/mkshadow/mkshadow.c
deleted file mode 100644
index d9c5eb841..000000000
--- a/nx-X11/config/util/mkshadow/mkshadow.c
+++ /dev/null
@@ -1,378 +0,0 @@
-/* $Xorg: mkshadow.c,v 1.3 2000/08/17 19:41:53 cpqbld Exp $ */
-/* mkshadow.c - make a "shadow copy" of a directory tree with symlinks.
-   Copyright 1990, 1993 Free Software Foundation, Inc.
-
-   Permission to use, copy, modify, and distribute this program for
-   any purpose and without fee is hereby granted, provided that this
-   copyright and permission notice appear on all copies, and that
-   notice be given that copying and distribution is by permission of
-   the Free Software Foundation.  The Free Software Foundation makes
-   no representations about the suitability of this software for any
-   purpose.  It is provided "as is" without expressed or implied
-   warranty.
-
-   (The FSF has modified its usual distribution terms, for this file,
-   as a courtesy to the X project.)  */
-
-/*
- * Usage: mkshadow [-X exclude_file] [-x exclude_pattern] ... MASTER [SHADOW]
- * Makes SHADOW be a "shadow copy" of MASTER.  SHADOW defaults to the current
- * directory. Sort of like a recursive copy of MASTER to SHADOW.
- * However, symbolic links are used instead of actually
- * copying (non-directory) files.
- * Also, directories named RCS or SCCS are shared (with a symbolic link).
- * Warning messages are printed for files (and directories) in .
- * that don't match a corresponding file in MASTER (though
- * symbolic links are silently removed).
- * Also, a warning message is printed for non-directory files
- * under SHADOW that are not symbolic links.
- *
- * Files and directories can be excluded from the sharing
- * with the -X and -x flags. The flag `-x pattern' (or `-xpattern')
- * means that mkshadow should ignore any file whose name matches
- * the pattern. The pattern is a "globbing" pattern, i.e. the
- * characters *?[^-] are interpreted as by the shell.
- * If the pattern contains a '/' is is matched against the complete
- * current path (relative to '.'); otherwise, it is matched
- * against the last component of the path.
- * A `-X filename' flag means to read a set of exclusion patterns
- * from the named file, one pattern to a line.
- *
- * Originally written by Per Bothner at University of Wisconsin-Madison,
- * inspired by the lndir script distributed with X11.
- * Modified by Per Bothner <bothner@cygnus.com> November 1993
- * to more-or-less follow Posix.
- */
-
-#include <sys/types.h>
-#include <stdio.h>
-#ifdef BSD
-#include <strings.h>
-#define strchr index
-#else
-#include <string.h>
-#endif
-#include <sys/stat.h>
-#if defined(S_IFDIR) && !defined(S_ISDIR)
-#define S_ISDIR(mode) (((mode) & S_IFMT) == S_IFDIR)
-#endif
-#if defined(S_IFLNK) && !defined(S_ISLNK)
-#define S_ISLNK(mode) (((mode) & S_IFMT) == S_IFLNK)
-#endif
-#ifndef S_ISLNK
-#define lstat stat
-#endif
-#ifndef MAXPATHLEN
-#define MAXPATHLEN 1024
-#endif
-#include <errno.h>
-#ifndef errno
-extern int errno;
-#endif
-
-extern char * savedir();
-
-fatal(msg)
-     char *msg;
-{
-    if (errno) perror(msg ? msg : "");
-    else if (msg) fprintf(stderr, "mkshadow: %s\n", msg);
-    exit(-1);
-}
-
-/* When handling symbolic links to relative directories,
- * we need to prepend "../" to the "source".
- * We preallocate MAX_DEPTH repetations of "../" using a simple trick.
- */
-#define MAX_DEPTH 20
-#define PREPEND_BUFFER_SIZE (MAX_DEPTH*3)
-char master_buffer[MAXPATHLEN+PREPEND_BUFFER_SIZE] =
-    "../../../../../../../../../../../../../../../../../../../../";
-/* The logical start of the master_buffer is defined by
- * master_start, which skips the fixed prepend area.
- */
-#define master_start (master_buffer+PREPEND_BUFFER_SIZE)
-char shadow_buffer[MAXPATHLEN];
-
-void bad_args(msg)
-{
-    if (msg) fprintf(stderr, "%s\n", msg);
-    fprintf (stderr, "usage: mkshadow [-X exclude_file] [-x exclude_pattern]");
-    fprintf (stderr, " master [shadow]\n");
-    exit(-1);
-}
-
-int exclude_count = 0;
-char **exclude_patterns = NULL;
-int exclude_limit = 0;
-
-void add_exclude(pattern)
-    char *pattern;
-{
-    if (exclude_limit == 0) {
-	exclude_limit = 100;
-	exclude_patterns = (char**)malloc(exclude_limit * sizeof(char*));
-    } else if (exclude_count + 1 >= exclude_limit) {
-	exclude_limit += 100;
-	exclude_patterns = (char**)realloc(exclude_patterns, 
-					   exclude_limit * sizeof(char*));
-    }
-    exclude_patterns[exclude_count] = pattern;
-    exclude_count++;
-}
-
-void add_exclude_file(name)
-     char *name;
-{
-    char buf[MAXPATHLEN];
-    FILE *file = fopen(name, "r");
-    if (file == NULL) fatal("failed to find -X (exclude) file");
-    for (;;) {
-	int len;
-	char *str = fgets(buf, MAXPATHLEN, file);
-	if (str == NULL) break;
-	len = strlen(str);
-	if (len && str[len-1] == '\n') str[--len] = 0;
-	if (!len) continue;
-	str = (char*)malloc(len+1);
-	strcpy(str, buf);
-	add_exclude(str);
-    }
-    fclose(file);
-}
-
-main(argc, argv)
-     char **argv;
-{
-    char *master_name = NULL;
-    char *shadow_name = NULL;
-    int i;
-    for (i = 1; i < argc; i++) {
-	if (argv[i][0] == '-') {
-	    switch(argv[i][1]) {
-	      case 'X':
-		if (argv[i][2]) add_exclude_file(&argv[i][2]);
-		else if (++i >= argc) bad_args(NULL);
-		else add_exclude_file(argv[i]);
-		break;
-	      case 'x':
-		if (argv[i][2]) add_exclude(&argv[i][2]);
-		else if (++i >= argc) bad_args(NULL);
-		else add_exclude(argv[i]);
-		break;
-	      default:
-		bad_args(NULL);
-	    }
-	} else if (master_name == NULL)
-	    master_name = argv[i];
-	else if (shadow_name == NULL)
-	    shadow_name = argv[i];
-	else bad_args (NULL);
-    }
-
-    if (master_name == NULL) bad_args(NULL);
-    if (shadow_name == NULL)
-	shadow_name = ".";
-    else if ((shadow_name[0] != '.' || shadow_name[1])
-	     && master_name[0] != '/') {
-	fprintf(stderr, "Shadowing a relative directory pathname to a \n");
-	fprintf(stderr, "shadow other than '.' is not supported!\n");
-	exit(-1);
-    }
-    strcpy(shadow_buffer, shadow_name);
-    strcpy(master_start, master_name);
-    DoCopy(master_start, shadow_buffer, 0);
-    return 0;
-}
-
-int compare_strings(ptr1, ptr2)
-     char **ptr1, **ptr2;
-{
-    return strcmp(*ptr1, *ptr2);
-}
-
-void MakeLink(master, current, depth)
-     char *master;
-     char *current;
-     int depth;
-{
-    if (master[0] != '/') {
-	/* Source directory was specified with a relative pathname. */
-	if (master != master_start) {
-	    fatal("Internal bug: bad string buffer use");
-	}
-	/* Pre-pend "../" depth times. This compensates for
-	 * the directories we've entered. */
-	master -= 3 * depth;
-    }
-    if (symlink(master, current)) {
-	fprintf(stderr, "Failed to create symbolic link %s->%s\n",
-		current, master);
-	exit (-1);
-    }
-}
-
-
-/* Get a sorted NULL_terminator array of (char*) using 'names'
- * (created by save_dir) as data.
- */
-char ** get_name_pointers(names)
-     char *names;
-{
-    int n_names = 0;
-    int names_buf_size = 64;
-    char *namep;
-    char ** pointers = (char**)malloc(names_buf_size * sizeof(char*));
-    if (!names || !pointers) fatal("virtual memory exhausted");
-
-    for (namep = names; *namep; namep += strlen(namep) + 1) {
-	if (n_names + 1 >= names_buf_size) {
-	    names_buf_size *= 2;
-	    pointers = (char**)realloc(pointers,
-				       names_buf_size * sizeof(char*));
-	    if (!pointers) fatal("virtual memory exhausted");
-	}
-	pointers[n_names++] = namep;
-    }
-    pointers[n_names] = 0;
-    qsort(pointers, n_names, sizeof(char*), compare_strings);
-    return pointers;
-}
-
-/* Recursively shadow the directory whose name is in MASTER
- * (which is == MASTER_START) into the destination directory named CURRENT.
- */
-
-DoCopy(master, current, depth)
-     char *master; /* The source directory. */
-     char *current; /* The destination directory. */
-     int depth;
-{
-    struct stat stat_master, stat_current;
-    char **master_pointer, **current_pointer;
-    char **master_names, **current_names;
-    char *master_end, *current_end;
-    char *master_name_buf, *current_name_buf;
-    master_end = master + strlen(master);
-    current_end = current + strlen(current);
-
-    /* Get rid of terminal '/' */
-    if (master_end[-1] == '/' && master != master_end - 1)
-	*--master_end = 0;
-    if (current_end[-1] == '/' && current != current_end - 1)
-	*--current_end = 0;
-
-    if (depth >= MAX_DEPTH) {
-	fprintf(stderr,
-		"Nesting too deep (depth %d at %s). Probable circularity.\n",
-		depth, master);
-	exit(-1);
-    }
-
-    master_name_buf = savedir(master, 500);
-    if (master_name_buf == NULL) {
-	fprintf(stderr, "Not enough memory or no such directory: %s\n",
-		master);
-	exit(-1);
-    }
-    current_name_buf = savedir(current, 500);
-    if (current_name_buf == NULL) {
-	fprintf(stderr, "Not enough memory or no such directory: %s\n",
-		current);
-	exit(-1);
-    }
-
-    master_names = get_name_pointers(master_name_buf);
-    current_names = get_name_pointers(current_name_buf);
-
-    master_pointer = master_names;
-    current_pointer = current_names;
-    for (;;) {
-	int cmp, ipat;
-	int in_master, in_current;
-	char *cur_name;
-	if (*master_pointer == NULL && *current_pointer == NULL)
-	    break;
-	if (*master_pointer == NULL) cmp = 1;
-	else if (*current_pointer == NULL) cmp = -1;
-	else cmp = strcmp(*master_pointer, *current_pointer);
-	if (cmp < 0) { /* file only exists in master directory */
-	    in_master = 1; in_current = 0;
-	} else if (cmp == 0) { /* file exists in both directories */
-	    in_master = 1; in_current = 1;
-	} else { /* file only exists in current directory */
-	    in_current = 1; in_master = 0;
-	}
-	cur_name = in_master ? *master_pointer : *current_pointer;
-	sprintf(master_end, "/%s", cur_name);
-	sprintf(current_end, "/%s", cur_name);
-	for (ipat = 0; ipat < exclude_count; ipat++) {
-	    char *pat = exclude_patterns[ipat];
-	    char *cur;
-	    if (strchr(pat, '/')) cur = current + 2; /* Skip initial "./" */
-	    else cur = cur_name;
-	    if (wildmat(cur, pat)) goto skip;
-	}
-	if (in_master)
-	    if (lstat(master, &stat_master) != 0) fatal("stat failed");
-	if (in_current)
-	    if (lstat(current, &stat_current) != 0) fatal("stat failed");
-	if (in_current && !in_master) {
-	    if (S_ISLNK(stat_current.st_mode))
-		if (unlink(current)) {
-		    fprintf(stderr, "Failed to remove symbolic link %s.\n",
-			    current);
-		}
-		else
-		    fprintf(stderr, "Removed symbolic link %s.\n",
-			    current);
-	    else {
-		fprintf(stderr,
-			"The file %s does not exist in the master tree.\n",
-			current);
-	    }
-	}
-	else if (S_ISDIR(stat_master.st_mode)
-		 && strcmp(cur_name, "RCS") != 0
-		 && strcmp(cur_name, "SCCS") != 0) {
-	    if (!in_current) {
-		if (mkdir(current, 0775)) fatal("mkdir failed");
-	    }
-	    else if (stat(current, &stat_current)) fatal("stat failed");
-	    if (!in_current || stat_current.st_dev != stat_master.st_dev
-		|| stat_current.st_ino != stat_master.st_ino)
-		DoCopy(master, current, depth+1);
-	    else
-		fprintf(stderr, "Link %s is the same as directory %s.\n",
-			current, master);
-	}
-	else {
-	    if (!in_current)
-		MakeLink(master, current, depth);
-	    else if (!S_ISLNK(stat_current.st_mode)) {
-		fprintf(stderr, "Existing file %s is not a symbolic link.\n",
-			current);
-	    } else {
-		if (stat(current, &stat_current) || stat(master, &stat_master))
-		    fatal("stat failed");
-		if (stat_current.st_dev != stat_master.st_dev
-		    || stat_current.st_ino != stat_master.st_ino) {
-		    fprintf(stderr, "Fixing incorrect symbolic link %s.\n",
-			    current);
-		    if (unlink(current)) {
-			fprintf(stderr, "Failed to remove symbolic link %s.\n",
-				current);
-		    }
-		    else
-			MakeLink(master, current, depth);
-		}
-	    }
-	}
-      skip:
-	if (in_master) master_pointer++;
-	if (in_current) current_pointer++;
-    }
-
-    free(master_names); free(current_names);
-    free(master_name_buf); free(current_name_buf);
-}
diff --git a/nx-X11/config/util/mkshadow/savedir.c b/nx-X11/config/util/mkshadow/savedir.c
deleted file mode 100644
index 6629f5a8d..000000000
--- a/nx-X11/config/util/mkshadow/savedir.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/* $Xorg: savedir.c,v 1.3 2000/08/17 19:41:53 cpqbld Exp $ */
-/* savedir.c -- save the list of files in a directory in a string
-   Copyright 1990, 1993 Free Software Foundation, Inc.
-
-   Permission to use, copy, modify, and distribute this program for
-   any purpose and without fee is hereby granted, provided that this
-   copyright and permission notice appear on all copies, and that
-   notice be given that copying and distribution is by permission of
-   the Free Software Foundation.  The Free Software Foundation makes
-   no representations about the suitability of this software for any
-   purpose.  It is provided "as is" without expressed or implied
-   warranty.
-
-   (The FSF has modified its usual distribution terms, for this file,
-   as a courtesy to the X project.)  */
-
-/* $XFree86$ */
-
-/* Written by David MacKenzie <djm@ai.mit.edu>.
-   Modified to use <dirent.h> by default.  Per Bothner <bothner@cygnus.com>. */
-
-#include <sys/types.h>
-#if !defined(DIRECT) && !defined(BSD)
-#include <dirent.h>
-#define NLENGTH(direct) (strlen((direct)->d_name))
-#else
-#undef dirent
-#define dirent direct
-#define NLENGTH(direct) ((direct)->d_namlen)
-#ifdef BSD
-#include <sys/dir.h>
-#else
-#ifdef SYSNDIR
-#include <sys/ndir.h>
-#else
-#include <ndir.h>
-#endif
-#endif
-#endif
-
-#if defined(VOID_CLOSEDIR) || defined(BSD)
-/* Fake a return value. */
-#define CLOSEDIR(d) (closedir (d), 0)
-#else
-#define CLOSEDIR(d) closedir (d)
-#endif
-
-#include <stdlib.h>
-#include <string.h>
-#include <stddef.h>
-
-char *stpcpy ();
-
-/* Return a freshly allocated string containing the filenames
-   in directory DIR, separated by '\0' characters;
-   the end is marked by two '\0' characters in a row.
-   NAME_SIZE is the number of bytes to initially allocate
-   for the string; it will be enlarged as needed.
-   Return NULL if DIR cannot be opened or if out of memory. */
-
-char *
-savedir (dir, name_size)
-     char *dir;
-     unsigned name_size;
-{
-  DIR *dirp;
-  struct dirent *dp;
-  char *name_space;
-  char *namep;
-
-  dirp = opendir (dir);
-  if (dirp == NULL)
-    return NULL;
-
-  name_space = (char *) malloc (name_size);
-  if (name_space == NULL)
-    {
-      closedir (dirp);
-      return NULL;
-    }
-  namep = name_space;
-
-  while ((dp = readdir (dirp)) != NULL)
-    {
-      /* Skip "." and ".." (some NFS filesystems' directories lack them). */
-      if (dp->d_name[0] != '.'
-	  || (dp->d_name[1] != '\0'
-	      && (dp->d_name[1] != '.' || dp->d_name[2] != '\0')))
-	{
-	  unsigned size_needed = (namep - name_space) + NLENGTH (dp) + 2;
-
-	  if (size_needed > name_size)
-	    {
-	      char *new_name_space;
-
-	      while (size_needed > name_size)
-		name_size += 1024;
-
-	      new_name_space = realloc (name_space, name_size);
-	      if (new_name_space == NULL)
-		{
-		  closedir (dirp);
-		  return NULL;
-		}
-	      namep += new_name_space - name_space;
-	      name_space = new_name_space;
-	    }
-	  strcpy (namep, dp->d_name);
-	  namep += strlen (namep) + 1;
-	}
-    }
-  *namep = '\0';
-  if (CLOSEDIR (dirp))
-    {
-      free (name_space);
-      return NULL;
-    }
-  return name_space;
-}
diff --git a/nx-X11/config/util/mkshadow/wildmat.c b/nx-X11/config/util/mkshadow/wildmat.c
deleted file mode 100644
index 8e0c179eb..000000000
--- a/nx-X11/config/util/mkshadow/wildmat.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/* $Xorg: wildmat.c,v 1.3 2000/08/17 19:41:53 cpqbld Exp $ */
-/*
-**
-**  Do shell-style pattern matching for ?, \, [], and * characters.
-**  Might not be robust in face of malformed patterns; e.g., "foo[a-"
-**  could cause a segmentation violation.  It is 8bit clean.
-**
-**  Written by Rich $alz, mirror!rs, Wed Nov 26 19:03:17 EST 1986.
-**  Rich $alz is now <rsalz@bbn.com>.
-**  April, 1991:  Replaced mutually-recursive calls with in-line code
-**  for the star character.
-**
-**  Special thanks to Lars Mathiesen <thorinn@diku.dk> for the ABORT code.
-**  This can greatly speed up failing wildcard patterns.  For example:
-**	pattern: -*-*-*-*-*-*-12-*-*-*-m-*-*-*
-**	text 1:	 -adobe-courier-bold-o-normal--12-120-75-75-m-70-iso8859-1
-**	text 2:	 -adobe-courier-bold-o-normal--12-120-75-75-X-70-iso8859-1
-**  Text 1 matches with 51 calls, while text 2 fails with 54 calls.  Without
-**  the ABORT, then it takes 22310 calls to fail.  Ugh.  The following
-**  explanation is from Lars:
-**  The precondition that must be fulfilled is that DoMatch will consume
-**  at least one character in text.  This is true if *p is neither '*' nor
-**  '\0'.)  The last return has ABORT instead of FALSE to avoid quadratic
-**  behaviour in cases like pattern "*a*b*c*d" with text "abcxxxxx".  With
-**  FALSE, each star-loop has to run to the end of the text; with ABORT
-**  only the last one does.
-**
-**  Once the control of one instance of DoMatch enters the star-loop, that
-**  instance will return either TRUE or ABORT, and any calling instance
-**  will therefore return immediately after (without calling recursively
-**  again).  In effect, only one star-loop is ever active.  It would be
-**  possible to modify the code to maintain this context explicitly,
-**  eliminating all recursive calls at the cost of some complication and
-**  loss of clarity (and the ABORT stuff seems to be unclear enough by
-**  itself).  I think it would be unwise to try to get this into a
-**  released version unless you have a good test data base to try it out
-**  on.
-*/
-
-#define TRUE			1
-#define FALSE			0
-#define ABORT			-1
-
-
-    /* What character marks an inverted character class? */
-#define NEGATE_CLASS		'^'
-    /* Is "*" a common pattern? */
-#define OPTIMIZE_JUST_STAR
-    /* Do tar(1) matching rules, which ignore a trailing slash? */
-#undef MATCH_TAR_PATTERN
-
-
-/*
-**  Match text and p, return TRUE, FALSE, or ABORT.
-*/
-static int
-DoMatch(text, p)
-    register char	*text;
-    register char	*p;
-{
-    register int	last;
-    register int	matched;
-    register int	reverse;
-
-    for ( ; *p; text++, p++) {
-	if (*text == '\0' && *p != '*')
-	    return ABORT;
-	switch (*p) {
-	case '\\':
-	    /* Literal match with following character. */
-	    p++;
-	    /* FALLTHROUGH */
-	default:
-	    if (*text != *p)
-		return FALSE;
-	    continue;
-	case '?':
-	    /* Match anything. */
-	    continue;
-	case '*':
-	    while (*++p == '*')
-		/* Consecutive stars act just like one. */
-		continue;
-	    if (*p == '\0')
-		/* Trailing star matches everything. */
-		return TRUE;
-	    while (*text)
-		if ((matched = DoMatch(text++, p)) != FALSE)
-		    return matched;
-	    return ABORT;
-	case '[':
-	    reverse = p[1] == NEGATE_CLASS ? TRUE : FALSE;
-	    if (reverse)
-		/* Inverted character class. */
-		p++;
-	    for (last = 0400, matched = FALSE; *++p && *p != ']'; last = *p)
-		/* This next line requires a good C compiler. */
-		if (*p == '-' ? *text <= *++p && *text >= last : *text == *p)
-		    matched = TRUE;
-	    if (matched == reverse)
-		return FALSE;
-	    continue;
-	}
-    }
-
-#ifdef	MATCH_TAR_PATTERN
-    if (*text == '/')
-	return TRUE;
-#endif	/* MATCH_TAR_ATTERN */
-    return *text == '\0';
-}
-
-
-/*
-**  User-level routine.  Returns TRUE or FALSE.
-*/
-int
-wildmat(text, p)
-    char	*text;
-    char	*p;
-{
-#ifdef	OPTIMIZE_JUST_STAR
-    if (p[0] == '*' && p[1] == '\0')
-	return TRUE;
-#endif	/* OPTIMIZE_JUST_STAR */
-    return DoMatch(text, p) == TRUE;
-}
-
-
-
-#ifdef	TEST
-#include <stdio.h>
-
-/* Yes, we use gets not fgets.  Sue me. */
-extern char	*gets();
-
-
-main()
-{
-    char	 p[80];
-    char	 text[80];
-
-    printf("Wildmat tester.  Enter pattern, then strings to test.\n");
-    printf("A blank line gets prompts for a new pattern; a blank pattern\n");
-    printf("exits the program.\n");
-
-    for ( ; ; ) {
-	printf("\nEnter pattern:  ");
-	(void)fflush(stdout);
-	if (gets(p) == NULL || p[0] == '\0')
-	    break;
-	for ( ; ; ) {
-	    printf("Enter text:  ");
-	    (void)fflush(stdout);
-	    if (gets(text) == NULL)
-		exit(0);
-	    if (text[0] == '\0')
-		/* Blank line; go back and get a new pattern. */
-		break;
-	    printf("      %s\n", wildmat(text, p) ? "YES" : "NO");
-	}
-    }
-
-    exit(0);
-    /* NOTREACHED */
-}
-#endif	/* TEST */
diff --git a/nx-X11/config/util/printver.c b/nx-X11/config/util/printver.c
deleted file mode 100644
index 2dbca7457..000000000
--- a/nx-X11/config/util/printver.c
+++ /dev/null
@@ -1,29 +0,0 @@
-
-/*
- * A simple program to make it possible to print the XFree86 version and
- * date info as defined in xf86Version.h and xf86Date.h very early in the
- * build process.
- */
-
-/* $XFree86: xc/config/util/printver.c,v 1.2 2003/02/26 09:21:33 dawes Exp $ */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include "xf86Version.h"
-#include "xf86Date.h"
-
-int
-main()
-{
-#ifdef XF86_VERSION_MAJOR
-	printf(" version %d.%d.%d", XF86_VERSION_MAJOR, XF86_VERSION_MINOR,
-		XF86_VERSION_PATCH);
-	if (XF86_VERSION_SNAP != 0)
-		printf(".%d", XF86_VERSION_SNAP);
-#ifdef XF86_DATE
-	printf(" (%s)", XF86_DATE);
-#endif
-#endif
-	exit(0);
-}
-
diff --git a/nx-X11/config/util/revpath.c b/nx-X11/config/util/revpath.c
deleted file mode 100644
index db88393cb..000000000
--- a/nx-X11/config/util/revpath.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright 1999 by The XFree86 Project, Inc.
- */
-/* $XFree86: xc/config/util/revpath.c,v 1.2 1999/02/01 11:55:49 dawes Exp $ */
-
-/*
- * Reverse a pathname.  It returns a relative path that can be used to undo
- * 'cd argv[1]'.
- *
- * It is impossible to do this in general, but this handles the cases that
- * come up in imake.  Maybe imake should use an absolute path for $(TOP)
- * instead of a relative path so that this problem can be avoided?
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-int
-main(int argc, char *argv[])
-{
-    int levels = 0;
-    char *p;
-
-    /* Silently ignore invalid usage */
-    if (argc != 2)
-	exit(0);
-
-    /* Split the path and count the levels */
-    p = strtok(argv[1], "/");
-    while (p) {
-	if (strcmp(p, ".") == 0)
-	    ;
-	else if (strcmp(p, "..") == 0)
-	    levels--;
-	else
-	    levels++;
-	p = strtok(NULL, "/");
-    }
-
-    while (levels-- > 0)
-	printf("../");
-
-    printf("\n");
-
-    exit(0);
-}
diff --git a/nx-X11/config/util/revpath.man b/nx-X11/config/util/revpath.man
deleted file mode 100644
index 5b9cace15..000000000
--- a/nx-X11/config/util/revpath.man
+++ /dev/null
@@ -1,45 +0,0 @@
-.\" $XFree86: xc/config/util/revpath.man,v 1.1 1999/01/03 03:58:14 dawes Exp $
-.TH REVPATH 1 __vendorversion__
-.SH NAME
-revpath \- generate a relative path that can be used to undo a change-directory
-.SH SYNOPSIS
-.B revpath
-.I path
-.SH DESCRIPTION
-The
-.I revpath
-program prints out a relative path that is the ``reverse'' or ``inverse'' of
-.IR path .
-Start with two directories
-.I top
-and
-.IR bottom ,
-with the latter below the former, and
-.I path
-is the location of
-.I bottom
-relative to
-.IR top .
-The output of
-.I revpath
-is the location of
-.I top
-relative to
-.IR bottom .
-The resulting path contains a trailing `/' character when the result is
-non-trivial.
-If
-.I path
-is equivalent to `.', the resulting output is empty.
-If
-.I path
-is invalid in some way (e.g., doesn't represent the path to a subdirectory)
-the output is also empty and no error messages are ever generated.
-.SH DIAGNOSTICS
-There are no diagnostics.  Error conditions are silently ignored, and the
-exit status is always 0.
-.SH BUGS
-It isn't possible to reverse arbitrary relative paths.
-If any path element between the two end points of
-.I path
-is a symbolic link, the results will probably be incorrect.
diff --git a/nx-X11/config/util/syminst.sh b/nx-X11/config/util/syminst.sh
deleted file mode 100644
index f9e1863d5..000000000
--- a/nx-X11/config/util/syminst.sh
+++ /dev/null
@@ -1,90 +0,0 @@
-#!/bin/sh
-
-#
-# syminst - install with a symbolic link back to the build tree
-#
-
-# set DOITPROG to echo to test this script
-
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-lnprog="${LNPROG-ln -s}"
-rmprog="${RMPROG-rm}"
-
-instcmd="$lnprog"
-rmcmd="$rmprog -f"
-srcdir=`pwd`/
-src=""
-dst=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) shift
-	    continue;;
-
-	-m) shift
-	    shift
-	    continue;;
-
-	-o) shift
-	    shift
-	    continue;;
-
-	-g) shift
-	    shift
-	    continue;;
-
-	-s) shift
-	    continue;;
-
-	-DIR) srcdir=`echo $2 | sed 's;/\./;/;g'`/
-	      shift
-              shift
-              continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "syminst:  no input file specified"
-	exit 1
-fi
-
-if [ x"$dst" = x ]
-then
-	echo "syminst:  no destination specified"
-	exit 1
-fi
-
-
-# if destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-if [ -d $dst ]
-then
-	dst="$dst"/`basename $src`
-fi
-
-case $src in
-    /*) srcdir=""
-	instcmd=cp;;
-esac
-
-# get rid of the old one and mode the new one in
-
-$doit $rmcmd $dst
-$doit $instcmd $srcdir$src $dst
-
-exit 0
diff --git a/nx-X11/config/util/x11mf.sh b/nx-X11/config/util/x11mf.sh
deleted file mode 100644
index 2c44194d5..000000000
--- a/nx-X11/config/util/x11mf.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/sh
-
-# 
-# generate a Makefile within the build tree
-# 
-# usage:  x11mf [treedir]
-# 
-
-if [ x$1 != x ]; then
-	tree=$1
-else
-	tree=/x11
-fi
-
-dir=`pwd`
-top=`(cd $tree; /bin/pwd)`
-intree=no
-
-case $dir in
-	$top*)	intree=yes;;
-esac
-
-if [ $intree != yes ]; then
-	echo "$0:  Must be underneath $tree"
-	exit 1
-fi
-
-(cd ..; make SUBDIRS=`basename $dir` Makefiles)
diff --git a/nx-X11/config/util/xmake.cmd b/nx-X11/config/util/xmake.cmd
deleted file mode 100644
index 24e14947f..000000000
--- a/nx-X11/config/util/xmake.cmd
+++ /dev/null
@@ -1,5 +0,0 @@
-/* REXX */
-/* $XFree86: xc/config/util/xmake.cmd,v 3.0 1996/01/24 21:56:17 dawes Exp $ */
-'@echo off'
-PARSE ARG a1 a2 a3 a4 a5 a6 a7 a8 a9 a10
-x11make.exe 'MAKE=x11make.exe SHELL=' a1 a2 a3 a4 a5 a6 a7 a8 a9 a10
diff --git a/nx-X11/config/util/xmkmf.cpp b/nx-X11/config/util/xmkmf.cpp
deleted file mode 100644
index 3d03bde3f..000000000
--- a/nx-X11/config/util/xmkmf.cpp
+++ /dev/null
@@ -1,70 +0,0 @@
-XCOMM!/bin/sh
-
-XCOMM $XFree86: xc/config/util/xmkmf.cpp,v 1.3 2000/11/06 21:57:10 dawes Exp $
-XCOMM
-XCOMM make a Makefile from an Imakefile from inside or outside the sources
-XCOMM 
-XCOMM $Xorg: xmkmf.cpp,v 1.3 2000/08/17 19:41:53 cpqbld Exp $
-
-usage="usage:  $0 [-a] [top_of_sources_pathname [current_directory]]"
-
-configdirspec=CONFIGDIRSPEC
-topdir=
-curdir=.
-do_all=
-imake_defines=
-
-while [ $# -gt 0 ]
-do
-    case "$1" in
-    -D*)
-       	imake_defines="$imake_defines $1"
-	shift
-	;;
-    -a)
-	do_all="yes"
-	shift
-	;;
-    *)
-    	break
-	;;
-    esac
-done
-
-case $# in 
-    0) ;;
-    1) topdir=$1 ;;
-    2) topdir=$1  curdir=$2 ;;
-    *) echo "$usage" 1>&2; exit 1 ;;
-esac
-
-case "$topdir" in
-    -*) echo "$usage" 1>&2; exit 1 ;;
-esac
-
-if [ -f Makefile ]; then 
-    echo mv -f Makefile Makefile.bak
-    mv -f Makefile Makefile.bak
-fi
-
-if [ "$topdir" = "" ]; then
-    args="-DUseInstalled "$configdirspec
-else
-    args="-I$topdir/config/cf -DTOPDIR=$topdir -DCURDIR=$curdir"
-fi
-
-echo imake $imake_defines $args
-case "$do_all" in
-yes)
-    imake $imake_defines $args && 
-    echo "make Makefiles" &&
-    make Makefiles &&
-    echo "make includes" &&
-    make includes &&
-    echo "make depend" &&
-    make depend
-    ;;
-*)
-    imake $imake_defines $args
-    ;;
-esac
diff --git a/nx-X11/config/util/xmkmf.man b/nx-X11/config/util/xmkmf.man
deleted file mode 100644
index 8a4f234dd..000000000
--- a/nx-X11/config/util/xmkmf.man
+++ /dev/null
@@ -1,89 +0,0 @@
-.\" $Xorg: xmkmf.man,v 1.4 2001/02/09 02:03:17 xorgcvs Exp $
-.\" Copyright (c) 1993, 1994, 1998 The Open Group
-.\" 
-.\" Permission to use, copy, modify, distribute, and sell this software and its
-.\" documentation for any purpose is hereby granted without fee, provided that
-.\" the above copyright notice appear in all copies and that both that
-.\" copyright notice and this permission notice appear in supporting
-.\" documentation.
-.\" 
-.\" The above copyright notice and this permission notice shall be included in
-.\" all copies or substantial portions of the Software.
-.\" 
-.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-.\" IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-.\" FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL 
-.\" THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 
-.\" WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF 
-.\" OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 
-.\" SOFTWARE.
-.\" 
-.\" Except as contained in this notice, the name of The Open Group shall not 
-.\" be used in advertising or otherwise to promote the sale, use or other 
-.\" dealing in this Software without prior written authorization from The 
-.\" Open Group.
-.\"
-.\" $XFree86: xc/config/util/xmkmf.man,v 1.2 2001/01/27 18:19:55 dawes Exp $
-.\"
-.TH XMKMF 1 __xorgversion__
-.SH NAME
-xmkmf \- create a Makefile from an Imakefile
-.SH SYNOPSIS
-.B xmkmf
-[ -a ] [
-.I topdir
-[
-.I curdir
-] ]
-.SH DESCRIPTION
-The
-.I xmkmf
-command is the normal way to create a
-.I Makefile 
-from an
-.I Imakefile
-shipped with third-party software.
-.PP
-When invoked with no arguments in a directory containing an
-.I Imakefile,
-the
-.I imake
-program is run with arguments appropriate for your system
-(configured into
-.I xmkmf
-when X was built) and generates a
-.I Makefile.
-.PP
-When invoked with the
-.I \-a
-option,
-.I xmkmf
-builds the
-.I Makefile
-in the current directory, and then automatically executes
-``make Makefiles'' (in case there are subdirectories),
-``make includes'',
-and ``make depend'' for you.
-This is the normal way to configure software that is outside
-the X Consortium build tree.
-.PP
-If working inside the X Consortium build tree (unlikely unless you 
-are an X developer, and even then this option is never really used), the
-.I topdir
-argument should be specified as the relative pathname from the
-current directory to the top of the build tree.  Optionally,
-.I curdir
-may be specified as a relative pathname from the top of the build
-tree to the current directory.  It is necessary to supply
-.I curdir
-if the current directory has subdirectories, or the
-.I Makefile
-will not be able to build the subdirectories.
-If a
-.I topdir
-is given,
-.I xmkmf
-assumes nothing is installed on your system and looks for files in
-the build tree instead of using the installed versions.
-.SH "SEE ALSO"
-imake(1)