fb: fix fast-path blt detection

Backport of this commit:

  commit a2880699e8f1f576e1a48ebf25e8982463323f84
  Author: Keith Packard <keithp@keithp.com>
  Date:   Tue Mar 25 08:21:16 2014 -0700

    fb: fix fast-path blt detection

    The width parameter is used to disable the blit fast-path (memcpy) when
        source and destination rows overlap in memory. This check was added in [0].

    Unfortunately, the calculation to determine if source and destination
    lines overlapped was incorrect:
      (1) it converts width from pixels to bytes, but width is actually in
          bits, not pixels.
      (2) it adds this byte offset to dst/srcLine, which implicitly converts
          the offset from bytes to sizeof(FbBits).

    Fix both of these by converting addresses to byte pointers and width
    to bytes and doing comparisons on the resulting byte address.

    For example:
    A 32-bpp 1366 pixel-wide row will have
      width = 1366 * 32 = 43712 bits
      bpp = 32
      (bpp >> 3) = 4
      width * (bpp >> 3) = 174848 FbBits
      (FbBits *)width => 699392 bytes

    So, "careful" was true if the destination line was within 699392 bytes,
    instead of just within its 1366 * 4 = 5464 byte row.

    This bug causes us to take the slow path for large non-overlapping rows
    that are "close" in memory.  As a data point, XGetImage(1366x768) on my
    ARM chromebook was taking ~140 ms, but with this fixed, it now takes
    about 60 ms.
      XGetImage() -> exaGetImage() -> fbGetImage -> fbBlt()

    [0] commit e32cc0b4c85c78cd8743a6e1680dcc79054b57ce
    Author: Adam Jackson <ajax@redhat.com>
    Date:   Thu Apr 21 16:37:11 2011 -0400

        fb: Fix memcpy abuse

        The memcpy fast path implicitly assumes that the copy walks
        left-to-right.  That's not something memcpy guarantees, and newer glibc
        on some processors will indeed break that assumption.  Since we walk a
        line at a time, check the source and destination against the width of
        the blit to determine whether we can be sloppy enough to allow memcpy.
        (Having done this, we can remove the check for !reverse as well.)

    v3: Convert to byte units

    This first checks to make sure the blt is byte aligned, converts all
    of the data to byte units and then compares for byte address range
    overlap between source and dest.

    Signed-off-by: Keith Packard <keithp@keithp.com>
    Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>

1 files changed, 34 insertions, 27 deletions

diff --git a/nx-X11/programs/Xserver/fb/fbblt.c b/nx-X11/programs/Xserver/fb/fbblt.c
index acec23bf2..6241af8eb 100644
--- a/nx-X11/programs/Xserver/fb/fbblt.c
+++ b/nx-X11/programs/Xserver/fb/fbblt.c
@@ -67,9 +67,42 @@ fbBlt (FbBits   *srcLine,
     int	    n, nmiddle;
     Bool    destInvarient;
     int	    startbyte, endbyte;
-    int     careful;
+
     FbDeclareMergeRop ();
 
+    if (alu == GXcopy && pm == FB_ALLONES &&
+        !(srcX & 7) && !(dstX & 7) && !(width & 7))
+    {
+        CARD8           *src_byte = (CARD8 *) srcLine + (srcX >> 3);
+        CARD8           *dst_byte = (CARD8 *) dstLine + (dstX >> 3);
+        FbStride        src_byte_stride = srcStride << (FB_SHIFT - 3);
+        FbStride        dst_byte_stride = dstStride << (FB_SHIFT - 3);
+        int             width_byte = (width >> 3);
+
+        /* Make sure there's no overlap; we can't use memcpy in that
+         * case as it's not well defined, so fall through to the
+         * general code
+         */
+        if (src_byte + width_byte <= dst_byte ||
+            dst_byte + width_byte <= src_byte)
+        {
+            int i;
+
+            if (!upsidedown)
+                for (i = 0; i < height; i++)
+                    memcpy(dst_byte + i * dst_byte_stride,
+                           src_byte + i * src_byte_stride,
+                           width_byte);
+            else
+                for (i = height - 1; i >= 0; i--)
+                    memcpy(dst_byte + i * dst_byte_stride,
+                           src_byte + i * src_byte_stride,
+                           width_byte);
+
+            return;
+        }
+    }
+
 #ifdef FB_24BIT
     if (bpp == 24 && !FbCheck24Pix (pm))
     {
@@ -79,32 +112,6 @@ fbBlt (FbBits   *srcLine,
     }
 #endif
 
-    careful = !((srcLine < dstLine && srcLine + width * (bpp>>3) > dstLine) ||
-                (dstLine < srcLine && dstLine + width * (bpp>>3) > srcLine)) ||
-              (bpp & 7);
-
-    if (alu == GXcopy && pm == FB_ALLONES && !careful &&
-            !(srcX & 7) && !(dstX & 7) && !(width & 7)) {
-        int i;
-        CARD8 *src = (CARD8 *) srcLine;
-        CARD8 *dst = (CARD8 *) dstLine;
-
-        srcStride *= sizeof(FbBits);
-        dstStride *= sizeof(FbBits);
-        width >>= 3;
-        src += (srcX >> 3);
-        dst += (dstX >> 3);
-
-        if (!upsidedown)
-            for (i = 0; i < height; i++)
-                memcpy(dst + i * dstStride, src + i * srcStride, width);
-        else
-            for (i = height - 1; i >= 0; i--)
-                memcpy(dst + i * dstStride, src + i * srcStride, width);
-
-        return;
-    }
-
     FbInitializeMergeRop(alu, pm);
     destInvarient = FbDestInvarientMergeRop();
     if (upsidedown)