nxcomp: Switch to autoreconf.

1 files changed, 0 insertions, 276 deletions

diff --git a/nxcomp/NXalert.h b/nxcomp/NXalert.h
deleted file mode 100644
index dca2f44ca..000000000
--- a/nxcomp/NXalert.h
+++ /dev/null
@@ -1,276 +0,0 @@
-/**************************************************************************/
-/*                                                                        */
-/* Copyright (c) 2001, 2011 NoMachine (http://www.nomachine.com)          */
-/* Copyright (c) 2008-2014 Oleksandr Shneyder <o.shneyder@phoca-gmbh.de>  */
-/* Copyright (c) 2014-2016 Ulrich Sibiller <uli42@gmx.de>                 */
-/* Copyright (c) 2014-2016 Mihai Moldovan <ionic@ionic.de>                */
-/* Copyright (c) 2011-2016 Mike Gabriel <mike.gabriel@das-netzwerkteam.de>*/
-/* Copyright (c) 2015-2016 Qindel Group (http://www.qindel.com)           */
-/*                                                                        */
-/* NXCOMP, NX protocol compression and NX extensions to this software     */
-/* are copyright of the aforementioned persons and companies.             */
-/*                                                                        */
-/* Redistribution and use of the present software is allowed according    */
-/* to terms specified in the file LICENSE.nxcomp which comes in the       */
-/* source distribution.                                                   */
-/*                                                                        */
-/* All rights reserved.                                                   */
-/*                                                                        */
-/* NOTE: This software has received contributions from various other      */
-/* contributors, only the core maintainers and supporters are listed as   */
-/* copyright holders. Please contact us, if you feel you should be listed */
-/* as copyright holder, as well.                                          */
-/*                                                                        */
-/**************************************************************************/
-
-#ifndef NXalert_H
-#define NXalert_H
-
-#define ALERT_CAPTION_PREFIX                                 "NX - "
-
-#define INTERNAL_ERROR_ALERT                                 1
-#define INTERNAL_ERROR_ALERT_TYPE                            "error"
-#define INTERNAL_ERROR_ALERT_STRING                          \
-"\
-An unrecoverable internal error was detected.\n\
-Press OK to terminate the current session.\n\
-"
-
-#define CLOSE_DEAD_X_CONNECTION_CLIENT_ALERT                 2
-#define CLOSE_DEAD_X_CONNECTION_CLIENT_ALERT_TYPE            "yesno"
-#define CLOSE_DEAD_X_CONNECTION_CLIENT_ALERT_STRING          \
-"\
-One of the applications currently in use is not responding.\n\
-Do you want to terminate the current session?\n\
-"
-
-#define CLOSE_DEAD_X_CONNECTION_SERVER_ALERT                 3
-#define CLOSE_DEAD_X_CONNECTION_SERVER_ALERT_TYPE            "yesno"
-#define CLOSE_DEAD_X_CONNECTION_SERVER_ALERT_STRING          \
-"\
-One of the applications did not behave correctly and caused\n\
-the X server to stop responding in a timely fashion. Do you\n\
-want to terminate the current session?\n\
-"
-
-#define CLOSE_DEAD_PROXY_CONNECTION_CLIENT_ALERT             4
-#define CLOSE_DEAD_PROXY_CONNECTION_CLIENT_ALERT_TYPE        NULL
-#define CLOSE_DEAD_PROXY_CONNECTION_CLIENT_ALERT_STRING      NULL
-
-#define CLOSE_DEAD_PROXY_CONNECTION_SERVER_ALERT             5
-#define CLOSE_DEAD_PROXY_CONNECTION_SERVER_ALERT_TYPE        "yesno"
-#define CLOSE_DEAD_PROXY_CONNECTION_SERVER_ALERT_STRING      \
-"\
-No response received from the remote server.\n\
-Do you want to terminate the current session?\n\
-"
-
-#define RESTART_DEAD_PROXY_CONNECTION_CLIENT_ALERT           6
-#define RESTART_DEAD_PROXY_CONNECTION_CLIENT_ALERT_TYPE      NULL
-#define RESTART_DEAD_PROXY_CONNECTION_CLIENT_ALERT_STRING    NULL
-
-#define RESTART_DEAD_PROXY_CONNECTION_SERVER_ALERT           7
-#define RESTART_DEAD_PROXY_CONNECTION_SERVER_ALERT_TYPE      "yesno"
-#define RESTART_DEAD_PROXY_CONNECTION_SERVER_ALERT_STRING    \
-"\
-Connection with remote server was shut down. NX will try\n\
-to establish a new server connection. Session could have\n\
-been left in a unusable state. Do you want to terminate\n\
-the session?\n\
-"
-
-#define CLOSE_UNRESPONSIVE_X_SERVER_ALERT                    8
-#define CLOSE_UNRESPONSIVE_X_SERVER_ALERT_TYPE               "panic"
-#define CLOSE_UNRESPONSIVE_X_SERVER_ALERT_STRING             \
-"\
-You pressed the key sequence CTRL+ALT+SHIFT+ESC.\n\
-This is probably because your X server has become\n\
-unresponsive. Session will be terminated in 30\n\
-seconds unless you abort the procedure by pressing\n\
-the Cancel button.\n\
-"
-
-#define WRONG_PROXY_VERSION_ALERT                            9
-#define WRONG_PROXY_VERSION_ALERT_TYPE                       "ok"
-#define WRONG_PROXY_VERSION_ALERT_STRING                     \
-"\
-Local NX libraries version " VERSION " do not match the NX\n\
-version of the remote server. Please check the error\n\
-log on the server to find out which client version you\n\
-need to install to be able to access this server.\n\
-"
-
-#define FAILED_PROXY_CONNECTION_CLIENT_ALERT                 10
-#define FAILED_PROXY_CONNECTION_CLIENT_ALERT_TYPE            NULL
-#define FAILED_PROXY_CONNECTION_CLIENT_ALERT_STRING          NULL
-
-#define FAILED_PROXY_CONNECTION_SERVER_ALERT                 11
-#define FAILED_PROXY_CONNECTION_SERVER_ALERT_TYPE            "yesno"
-#define FAILED_PROXY_CONNECTION_SERVER_ALERT_STRING          \
-"\
-Could not yet establish the connection to the remote\n\
-proxy. Do you want to terminate the current session?\n\
-"
-
-#define MISSING_PROXY_CACHE_ALERT                            12
-#define MISSING_PROXY_CACHE_ALERT_TYPE                       "ok"
-#define MISSING_PROXY_CACHE_ALERT_STRING                     \
-"\
-NX was unable to negotiate a cache for this session.\n\
-This may happen if this is the first time you run a\n\
-session on this server or if cache was corrupted or\n\
-produced by an incompatible NX version.\n\
-"
-
-#define ABORT_PROXY_CONNECTION_ALERT                         13
-#define ABORT_PROXY_CONNECTION_ALERT_TYPE                    "ok"
-#define ABORT_PROXY_CONNECTION_ALERT_STRING                  \
-"\
-The connection with the remote server was shut down.\n\
-Please check the state of your network connection.\n\
-"
-
-/*
- * The one below is a special alert, used to close
- * a previous alert that is running on the given
- * side. This can be used to get rid of a message
- * that has ceased to hold true.
- */
-
-#define DISPLACE_MESSAGE_ALERT                               14
-#define DISPLACE_MESSAGE_ALERT_TYPE                          NULL
-#define DISPLACE_MESSAGE_ALERT_STRING                        NULL
-
-/*
- * These are the other alert messages that were
- * added in the 1.5.0 release. The first is never
- * shown and is intended just for testing.
- */
-
-#define GREETING_MESSAGE_ALERT                               15
-#define GREETING_MESSAGE_ALERT_TYPE                          "ok"
-#define GREETING_MESSAGE_ALERT_STRING                        \
-"\
-Welcome to NX from the NoMachine team. We really\n\
-hope you will enjoy this wonderful software as much\n\
-as we had fun making it ;-).\n\
-"
-
-/*
- * These alerts are intended to notify the user
- * of the reason why the agent failed to resume
- * the session.
- */
-
-#define START_RESUME_SESSION_ALERT                           16
-#define START_RESUME_SESSION_ALERT_TYPE                      "ok"
-#define START_RESUME_SESSION_ALERT_STRING                    \
-"\
-You appear to run your NX session across a slow network\n\
-connection. Resuming the session may require some time.\n\
-Please wait.\
-"
-
-#define FAILED_RESUME_DISPLAY_ALERT                          17
-#define FAILED_RESUME_DISPLAY_ALERT_TYPE                     "error"
-#define FAILED_RESUME_DISPLAY_ALERT_STRING                   \
-"\
-Failed to open the display. Can't resume the NX\n\
-session on this display.\n\
-"
-
-#define FAILED_RESUME_DISPLAY_BROKEN_ALERT                   18
-#define FAILED_RESUME_DISPLAY_BROKEN_TYPE                    "error"
-#define FAILED_RESUME_DISPLAY_BROKEN_STRING                  \
-"\
-The display connection was broken while trying to\n\
-resume the session. Please, check your network\n\
-connection and try again.\n\
-"
-
-#define FAILED_RESUME_VISUALS_ALERT                          19
-#define FAILED_RESUME_VISUALS_ALERT_TYPE                     "error"
-#define FAILED_RESUME_VISUALS_ALERT_STRING                   \
-"\
-Failed to restore all the required visuals.\n\
-Can't resume the NX session on this display.\n\
-"
-
-#define FAILED_RESUME_COLORMAPS_ALERT                        20
-#define FAILED_RESUME_COLORMAPS_ALERT_TYPE                   "error"
-#define FAILED_RESUME_COLORMAPS_ALERT_STRING                 \
-"\
-The number of available colormaps is different\n\
-on the new display. Can't resume the NX session\n\
-on this display.\n\
-"
-
-#define FAILED_RESUME_PIXMAPS_ALERT                          21
-#define FAILED_RESUME_PIXMAPS_ALERT_TYPE                     "error"
-#define FAILED_RESUME_PIXMAPS_ALERT_STRING                   \
-"\
-Failed to restore all the required pixmap formats.\n\
-Can't resume the NX session on this display.\n\
-"
-
-#define FAILED_RESUME_DEPTHS_ALERT                           22
-#define FAILED_RESUME_DEPTHS_ALERT_TYPE                      "error"
-#define FAILED_RESUME_DEPTHS_ALERT_STRING                    \
-"\
-Failed to restore all the required screen depths.\n\
-Can't resume the NX session on this display.\n\
-"
-
-#define FAILED_RESUME_RENDER_ALERT                           23
-#define FAILED_RESUME_RENDER_ALERT_TYPE                      "error"
-#define FAILED_RESUME_RENDER_ALERT_STRING                    \
-"\
-The render extension is missing or an incompatible\n\
-version was detected on your X server. Can't resume\n\
-the NX session on this display.\n\
-"
-
-#define FAILED_RESUME_FONTS_ALERT                            24
-#define FAILED_RESUME_FONTS_ALERT_TYPE                       "error"
-#define FAILED_RESUME_FONTS_ALERT_STRING                     \
-"\
-One or more of the fonts that are in use by the\n\
-session are missing. Can't resume the NX session\n\
-on this display.\n\
-"
-
-#define ABORT_PROXY_NEGOTIATION_ALERT                        62
-#define ABORT_PROXY_NEGOTIATION_ALERT_TYPE                   "ok"
-#define ABORT_PROXY_NEGOTIATION_ALERT_STRING                 \
-"\
-The remote proxy closed the connection while negotiating\n\
-the session. This may be due to the wrong authentication\n\
-credentials passed to the server.\n\
-"
-
-#define ABORT_PROXY_SHUTDOWN_ALERT                           64
-#define ABORT_PROXY_SHUTDOWN_ALERT_TYPE                      "ok"
-#define ABORT_PROXY_SHUTDOWN_ALERT_STRING                    \
-"\
-No response received from the remote proxy while\n\
-waiting for the session shutdown.\n\
-"
-
-#define FAILED_XDMCP_CONNECTION_ALERT                        65
-#define FAILED_XDMCP_CONNECTION_ALERT_TYPE                   "ok"
-#define FAILED_XDMCP_CONNECTION_ALERT_STRING                 \
-"\
-The XDM host that was contacted by the NX server doesn't\n\
-seem to be able to start the session. Please check your\n\
-server configuration.\n\
-"
-
-/*
- * Used to handle the backward compatibility.
- * Update the numbers if you add a new alert. 
- */
-
-#define LAST_PROTO_STEP_6_ALERT  63
-#define LAST_PROTO_STEP_7_ALERT  65
-
-#endif /* NXalert_H */