nxcomp: Switch to autoreconf.

6 files changed, 1627 insertions, 0 deletions

diff --git a/nxcomp/include/MD5.h b/nxcomp/include/MD5.h
new file mode 100644
index 000000000..698c995d8
--- /dev/null
+++ b/nxcomp/include/MD5.h
@@ -0,0 +1,91 @@
+/*
+  Copyright (C) 1999, 2002 Aladdin Enterprises.  All rights reserved.
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  L. Peter Deutsch
+  ghost@aladdin.com
+
+ */
+/* $Id: md5.h,v 1.4 2002/04/13 19:20:28 lpd Exp $ */
+/*
+  Independent implementation of MD5 (RFC 1321).
+
+  This code implements the MD5 Algorithm defined in RFC 1321, whose
+  text is available at
+	http://www.ietf.org/rfc/rfc1321.txt
+  The code is derived from the text of the RFC, including the test suite
+  (section A.5) but excluding the rest of Appendix A.  It does not include
+  any code or documentation that is identified in the RFC as being
+  copyrighted.
+
+  The original and principal author of md5.h is L. Peter Deutsch
+  <ghost@aladdin.com>.  Other authors are noted in the change history
+  that follows (in reverse chronological order):
+
+  2002-04-13 lpd Removed support for non-ANSI compilers; removed
+	references to Ghostscript; clarified derivation from RFC 1321;
+	now handles byte order either statically or dynamically.
+  1999-11-04 lpd Edited comments slightly for automatic TOC extraction.
+  1999-10-18 lpd Fixed typo in header comment (ansi2knr rather than md5);
+	added conditionalization for C++ compilation from Martin
+	Purschke <purschke@bnl.gov>.
+  1999-05-03 lpd Original version.
+ */
+
+#ifndef md5_INCLUDED
+#  define md5_INCLUDED
+
+/*
+ * This package supports both compile-time and run-time determination of CPU
+ * byte order.  If ARCH_IS_BIG_ENDIAN is defined as 0, the code will be
+ * compiled to run only on little-endian CPUs; if ARCH_IS_BIG_ENDIAN is
+ * defined as non-zero, the code will be compiled to run only on big-endian
+ * CPUs; if ARCH_IS_BIG_ENDIAN is not defined, the code will be compiled to
+ * run on either big- or little-endian CPUs, but will run slightly less
+ * efficiently on either one than if ARCH_IS_BIG_ENDIAN is defined.
+ */
+
+typedef unsigned char md5_byte_t; /* 8-bit byte */
+typedef unsigned int md5_word_t; /* 32-bit word */
+
+/* Define the state of the MD5 Algorithm. */
+typedef struct md5_state_s {
+    md5_word_t count[2];	/* message length in bits, lsw first */
+    md5_word_t abcd[4];		/* digest buffer */
+    md5_byte_t buf[64];		/* accumulate block */
+} md5_state_t;
+
+#ifdef __cplusplus
+extern "C" 
+{
+#endif
+
+/* Initialize the algorithm. */
+void md5_init(md5_state_t *pms);
+
+/* Append a string to the message. */
+void md5_append(md5_state_t *pms, const md5_byte_t *data, int nbytes);
+
+/* Finish the message and return the digest. */
+void md5_finish(md5_state_t *pms, md5_byte_t digest[16]);
+
+#ifdef __cplusplus
+}  /* end extern "C" */
+#endif
+
+#endif /* md5_INCLUDED */
diff --git a/nxcomp/include/NX.h b/nxcomp/include/NX.h
new file mode 100644
index 000000000..7ec79b4b1
--- /dev/null
+++ b/nxcomp/include/NX.h
@@ -0,0 +1,471 @@
+/**************************************************************************/
+/*                                                                        */
+/* Copyright (c) 2001, 2011 NoMachine (http://www.nomachine.com)          */
+/* Copyright (c) 2008-2014 Oleksandr Shneyder <o.shneyder@phoca-gmbh.de>  */
+/* Copyright (c) 2014-2016 Ulrich Sibiller <uli42@gmx.de>                 */
+/* Copyright (c) 2014-2016 Mihai Moldovan <ionic@ionic.de>                */
+/* Copyright (c) 2011-2016 Mike Gabriel <mike.gabriel@das-netzwerkteam.de>*/
+/* Copyright (c) 2015-2016 Qindel Group (http://www.qindel.com)           */
+/*                                                                        */
+/* NXCOMP, NX protocol compression and NX extensions to this software     */
+/* are copyright of the aforementioned persons and companies.             */
+/*                                                                        */
+/* Redistribution and use of the present software is allowed according    */
+/* to terms specified in the file LICENSE.nxcomp which comes in the       */
+/* source distribution.                                                   */
+/*                                                                        */
+/* All rights reserved.                                                   */
+/*                                                                        */
+/* NOTE: This software has received contributions from various other      */
+/* contributors, only the core maintainers and supporters are listed as   */
+/* copyright holders. Please contact us, if you feel you should be listed */
+/* as copyright holder, as well.                                          */
+/*                                                                        */
+/**************************************************************************/
+
+#ifndef NX_H
+#define NX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <unistd.h>
+
+#include <sys/time.h>
+#include <sys/types.h>
+#include <sys/select.h>
+#include <sys/uio.h>
+
+#define NX_FD_ANY                      -1
+
+#define NX_MODE_ANY                    -1
+#define NX_MODE_CLIENT                  1
+#define NX_MODE_SERVER                  2
+
+#define NX_DISPLAY_ANY                  NULL
+
+#define NX_SIGNAL_ANY                  -1
+#define NX_SIGNAL_ENABLE                1
+#define NX_SIGNAL_DISABLE               2
+#define NX_SIGNAL_RAISE                 3
+#define NX_SIGNAL_FORWARD               4
+
+#define NX_POLICY_IMMEDIATE             1
+#define NX_POLICY_DEFERRED              2
+
+#define NX_ALERT_REMOTE                 0
+#define NX_ALERT_LOCAL                  1
+
+#define NX_HANDLER_FLUSH                0
+#define NX_HANDLER_STATISTICS           1
+
+#define NX_STATISTICS_PARTIAL           0
+#define NX_STATISTICS_TOTAL             1
+
+#define NX_CHANNEL_X11                  0
+#define NX_CHANNEL_CUPS                 1
+#define NX_CHANNEL_SMB                  2
+#define NX_CHANNEL_MEDIA                3
+#define NX_CHANNEL_HTTP                 4
+#define NX_CHANNEL_FONT                 5
+#define NX_CHANNEL_SLAVE                6
+
+#define NX_FILE_SESSION                 0
+#define NX_FILE_ERRORS                  1
+#define NX_FILE_OPTIONS                 2
+#define NX_FILE_STATS                   3
+
+/*
+ * The following are the new interfaces to the NX transport. The
+ * NX proxy software is now intended to be run as a library of a
+ * higher level communication manager (nxssh, nxhttp, nxrtp, etc,
+ * not only nxproxy). This is a work-in-progress, so expect these
+ * interfaces to change in future. At the present moment, as an
+ * example, there is no provision for creating and managing mul-
+ * tiple proxy connections.
+ */
+
+/*
+ * Attach a NX transport to the provided descriptor. This should be
+ * done after having created a pair of connected sockets.
+ */
+
+extern int NXTransCreate(int fd, int mode, const char *options);
+
+/*
+ * Tell the proxy to use the second descriptor as its own end of
+ * the internal connection to the NX agent. The NX agent will use
+ * the first descriptor. Setting an agent connection will have the
+ * effect of disabling further X client connections and, if it is
+ * possible, will trigger the use of the memory-to-memory transport.
+ */
+
+extern int NXTransAgent(int fd[2]);
+
+/*
+ * Prepare the file sets and the timeout for a later execution of
+ * the select(). The masks and the timeout must persist across all
+ * the calls, so if you don't need any of the values, it is requi-
+ * red that you create empty masks and a default timeout. To save
+ * a check at each run, all the functions below assume that valid
+ * pointers are passed.
+ */
+
+extern int NXTransPrepare(int *maxfds, fd_set *readfds,
+                              fd_set *writefds, struct timeval *timeout);
+
+/*
+ * Call select() to find out the descriptors in the sets having
+ * pending data.
+ */
+
+extern int NXTransSelect(int *result, int *error, int *maxfds, fd_set *readfds,
+                             fd_set *writefds, struct timeval *timeout);
+
+/*
+ * Perform the required I/O on all the NX descriptors having pen-
+ * ding data. This can include reading and writing to the NX chan-
+ * nels, encoding and decoding the proxy data or managing any of
+ * the other NX resources.
+ */
+
+extern int NXTransExecute(int *result, int *error, int *maxfds, fd_set *readfds,
+                              fd_set *writefds, struct timeval *timeout);
+
+/*
+ * Run an empty loop, giving to the NX transport a chance to check
+ * its descriptors.
+ */
+
+extern int NXTransContinue(struct timeval *timeout);
+
+/*
+ * Perform I/O on the given descriptors. If memory-to-memory trans-
+ * port has been activated and the descriptor is recognized as a
+ * valid agent connection, then the functions will read and write
+ * the data directly to the proxy buffer, otherwise the correspond-
+ * ing network operation will be performed.
+ */
+
+extern int NXTransRead(int fd, char *data, int size);
+extern int NXTransWrite(int fd, char *data, int size);
+extern int NXTransReadable(int fd, int *readable);
+
+extern int NXTransReadVector(int fd, struct iovec *iovdata, int iovsize);
+extern int NXTransWriteVector(int fd, struct iovec *iovdata, int iovsize);
+
+extern int NXTransClose(int fd);
+
+/*
+ * Return true if the NX transport is running. The fd parameter can
+ * be either the local descriptor attached to the NX transport or
+ * NX_FD_ANY.
+ */
+
+extern int NXTransRunning(int fd);
+
+/*
+ * Close down the NX transport and free all the allocated resources.
+ * The fd parameter can be either the local descriptor or NX_FD_ANY.
+ * This must be explicitly called by the agent before the proxy can
+ * start the tear down procedure.
+ */
+
+extern int NXTransDestroy(int fd);
+
+/*
+ * Tell to the proxy how to handle the standard POSIX signals. For
+ * example, given the SIGINT signal, the caller can specify any of
+ * the following actions:
+ *
+ * NX_SIGNAL_ENABLE:  A signal handler will have to be installed by
+ *                    the library, so that it can be intercepted by
+ *                    the proxy.
+ *
+ * NX_SIGNAL_DISABLE: The signal will be handled by the caller and,
+ *                    eventually, forwarded to the proxy by calling
+ *                    NXTransSignal() explicitly.
+ *
+ * NX_SIGNAL_RAISE:   The signal must be handled now, as if it had
+ *                    been delivered by the operating system. This
+ *                    function can be called by the agent with the
+ *                    purpose of propagating a signal to the proxy.
+ *
+ * NX_SIGNAL_FORWARD: A signal handler will have to be installed by
+ *                    the library but the library will have to call
+ *                    the original signal handler when the signal
+ *                    is received.
+ *
+ * As a rule of thumb, agents should let the proxy handle SIGUSR1
+ * and SIGUSR2, used for producing the NX protocol statistics, and
+ * SIGHUP, used for disconnecting the NX transport.
+ *
+ * The following signals are blocked by default upon creation of the
+ * NX transport:
+ *
+ * SIGCHLD    These signals should be always put under the control
+ * SIGUSR1    of the proxy. If agents are intercepting them, agents
+ * SIGUSR2    should later call NXTransSignal(..., NX_SIGNAL_RAISE)
+ * SIGHUP     to forward the signal to the proxy. As an alternative
+ *            they can specify a NX_SIGNAL_FORWARD action, so they,
+ *            in turn, can be notified about the signal. This can
+ *            be especially useful for SIGCHLD.
+ *
+ * SIGINT     These signals should be intercepted by agents. Agents
+ * SIGTERM    should ensure that NXTransDestroy() is called before
+ *            exiting, to give the proxy a chance to shut down the
+ *            NX transport.
+ *
+ * SIGPIPE    This signal is blocked by the proxy, but not used to
+ *            implement any functionality. It can be handled by the
+ *            NX agent without affecting the proxy.
+ *
+ * SIGALRM    This is now used by the proxy and agents should not
+ *            redefine it. Agents can use the signal to implement
+ *            their own timers but should not interleave calls to
+ *            the NX transport and should restore the old handler
+ *            when the timeout is raised.
+ *
+ * SIGVTALRM  These signals are not used but may be used in future
+ * SIGWINCH   versions of the library.
+ * SIGIO
+ * SIGTSTP
+ * SIGTTIN
+ * SIGTTOU
+ *
+ * By calling NXTransSignal(..., NX_SIGNAL_DISABLE) nxcomp will res-
+ * tore the signal handler that was saved at the time the proxy hand-
+ * ler was installed. This means that you should call the function
+ * just after the XOpenDisplay() or any other function used to init-
+ * ialize the NX transport.
+ */
+ 
+extern int NXTransSignal(int signal, int action);
+
+/*
+ * Return a value between 0 and 9 indicating the congestion level
+ * based on the tokens still available. A value of 9 means that
+ * the link is congested and no further data can be sent.
+ */
+
+extern int NXTransCongestion(int fd);
+
+/*
+ * Let the application to be notified by the proxy when an event oc-
+ * curs. The parameter, as set at the time the handler is installed,
+ * is passed each time to the callback function. The parameter is
+ * presumably the display pointer, given that at the present moment
+ * the NX transport doesn't have access to the display structure and
+ * so wouldn't be able to determine the display to pass to the call-
+ * back function.
+ *
+ * NX_HANDLER_FLUSH:      The handler function is called when some
+ *                        more data has been written to the proxy
+ *                        link.
+ *
+ * The data is the number of bytes written.
+ *
+ * NX_HANDLER_STATISTICS: This handler is called to let the agent
+ *                        include arbitrary data in the transport
+ *                        statistics. The parameter, in this case,
+ *                        is a pointer to a pointer to a null term-
+ *                        inated string. The pointer is set at the
+ *                        time the handler is registered. The point-
+ *                        ed string will have to be filled by the
+ *                        agent with its statistics data.
+ *
+ * The data can be NX_STATISTICS_PARTIAL or NX_STATISTICS_TOTAL. The
+ * agent can refer to the value by using the  NXStatisticsPartial and
+ * NXStatisticsTotal constants defined in NXvars.h.
+ *
+ * Note that these interfaces are used by Xlib and nxcompext. Agents
+ * should never call these interfaces directly, but use the nxcompext
+ * wrapper.
+ */
+
+extern int NXTransHandler(int fd, int type, void (*handler)(void *parameter,
+                              int reason), void *parameter);
+
+/*
+ * Set the policy to be used by the NX transport to write data to the
+ * proxy link:
+ *
+ * NX_POLICY_IMMEDIATE: When set to immediate, the proxy will try to
+ *                      write the data just after having encoded it.
+ *
+ * NX_POLICY_DEFERRED:  When policy is set to deferred, data will be
+ *                      accumulated in a buffer and written to the
+ *                      remote proxy when NXTransFlush() is called by
+ *                      the agent.
+ */
+
+extern int NXTransPolicy(int fd, int type);
+
+/*
+ * Query the number of bytes that have been accumulated for a deferred
+ * flush.
+ */
+
+extern int NXTransFlushable(int fd);
+
+/*
+ * Tell to the NX transport to write all the accumulated data to the
+ * remote proxy.
+ */
+
+extern int NXTransFlush(int fd);
+
+/*
+ * Create a new channel of the given type. It returns 1 on success,
+ * 0 if the NX transport is not running, or -1 in the case of error.
+ * On success, the descriptor provided by the caller can be later
+ * used for the subsequent I/O. The type parameter not only tells to
+ * the proxy the remote port where the channel has to be connected,
+ * but also gives a hint about the type of data that will be carried
+ * by the channel, so that the proxy can try to optimize the traffic
+ * on the proxy link.
+ *
+ * NX_CHANNEL_X:     The channel will carry X traffic and it
+ *                   will be connected to the remote X display.
+ *
+ * NX_CHANNEL_CUPS:  The channel will carry CUPS/IPP protocol.
+ *
+ * NX_CHANNEL_SMB:   The channel will carry SMB/CIFS protocol.
+ *
+ * NX_CHANNEL_MEDIA: The channel will transport audio or other
+ *                   multimedia data.
+ *
+ * NX_CHANNEL_HTTP:  The channel will carry HTTP protocol.
+ *
+ * NX_CHANNEL_FONT:  The channel will forward a X font server
+ *                   connection.
+ *
+ * Only a proxy running at the NX server/X client side will be able
+ * to create a X, CUPS, SMB, MEDIA and HTTP channel. A proxy running
+ * at the NX client/X server side can create font server connections.
+ * The channel creation will also fail if the remote end has not been
+ * set up to forward the connection.
+ *
+ * To create a new channel the agent will have to set up a socketpair
+ * and pass to the proxy one of the socket descriptors.
+ *
+ * Example:
+ *
+ * #include <sys/types.h>
+ * #include <sys/socket.h>
+ *
+ * int fds[2];
+ *
+ * if (socketpair(PF_LOCAL, SOCK_STREAM, 0, fds) < 0)
+ * {
+ *   ...
+ * }
+ * else
+ * {
+ *   //
+ *   // Use fds[0] locally and let the
+ *   // proxy use fds[1].
+ *   //
+ *
+ *   if (NXTransChannel(NX_FD_ANY, fds[1], NX_CHANNEL_X) <= 0)
+ *   {
+ *     ...
+ *   }
+ *
+ *   //
+ *   // The agent can now use fds[0] in
+ *   // read(), write() and select()
+ *   // system calls.
+ *   //
+ *
+ *   ...
+ * }
+ *
+ * Note that all the I/O on the descriptor should be non-blocking, to
+ * give a chance to the NX transport to run in the background and handle
+ * the data that will be fed to the agent's side of the socketpair. This
+ * will happen automatically, as long as the agent uses the XSelect()
+ * version of the select() function (as it is normal whenever performing
+ * Xlib I/O). In all the other cases, like presumably in the agent's main
+ * loop, the agent will have to loop through NXTransPrepare(), NXTrans-
+ * Select() and NXTransExecute() functions explicitly, adding to the sets
+ * the descriptors that are awaited by the agent. Please check the imple-
+ * mentation of _XSelect() in nx-X11/lib/X11/XlibInt.c for an example.
+ */
+
+extern int NXTransChannel(int fd, int channelfd, int type);
+
+/*
+ * Return the name of the files used by the proxy for the current session.
+ *
+ * The type parameter can be:
+ *
+ * NX_FILE_SESSION:  Usually the file 'session' in the user's session
+ *                   directory.
+ *
+ * NX_FILE_ERRORS:   The file used for the diagnostic output. Usually
+ *                   the file 'errors' in the session directory.
+ *
+ * NX_FILE_OPTIONS:  The file containing the NX options, if any.
+ *
+ * NX_FILE_STATS:    The file used for the statistics output.
+ *
+ * The returned string is allocated in static memory. The caller should
+ * copy the string upon returning from the function, without freeing the
+ * pointer.
+ */
+
+extern const char *NXTransFile(int type);
+
+/*
+ * Return the time in milliseconds elapsed since the last call to this
+ * same function.
+ */
+
+extern long NXTransTime(void);
+
+/*
+ * Other interfaces to the internal transport functions.
+ */
+
+extern int NXTransProxy(int fd, int mode, const char *display);
+
+extern int NXTransClient(const char *display);
+
+extern int NXTransDialog(const char *caption, const char *message,
+                           const char *window, const char *type, int local,
+                               const char *display);
+
+extern int NXTransAlert(int code, int local);
+
+extern int NXTransWatchdog(int timeout);
+
+extern int NXTransKeeper(int caches, int images, const char *root);
+
+extern void NXTransExit(int code) __attribute__((noreturn));
+
+extern int NXTransParseCommandLine(int argc, const char **argv);
+extern int NXTransParseEnvironment(const char *env, int force);
+
+extern void NXTransCleanup(void) __attribute__((noreturn));
+
+/*
+ * Cleans up the global and local state
+ * (the same way as NXTransCleanup does)
+ * but does not exit the process
+ * Needed for IOS platform
+ */
+extern void NXTransCleanupForReconnect(void);
+
+extern const char* NXVersion(void);
+extern int NXMajorVersion(void);
+extern int NXMinorVersion(void);
+extern int NXPatchVersion(void);
+extern int NXMaintenancePatchVersion(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* NX_H */
diff --git a/nxcomp/include/NXalert.h b/nxcomp/include/NXalert.h
new file mode 100644
index 000000000..dca2f44ca
--- /dev/null
+++ b/nxcomp/include/NXalert.h
@@ -0,0 +1,276 @@
+/**************************************************************************/
+/*                                                                        */
+/* Copyright (c) 2001, 2011 NoMachine (http://www.nomachine.com)          */
+/* Copyright (c) 2008-2014 Oleksandr Shneyder <o.shneyder@phoca-gmbh.de>  */
+/* Copyright (c) 2014-2016 Ulrich Sibiller <uli42@gmx.de>                 */
+/* Copyright (c) 2014-2016 Mihai Moldovan <ionic@ionic.de>                */
+/* Copyright (c) 2011-2016 Mike Gabriel <mike.gabriel@das-netzwerkteam.de>*/
+/* Copyright (c) 2015-2016 Qindel Group (http://www.qindel.com)           */
+/*                                                                        */
+/* NXCOMP, NX protocol compression and NX extensions to this software     */
+/* are copyright of the aforementioned persons and companies.             */
+/*                                                                        */
+/* Redistribution and use of the present software is allowed according    */
+/* to terms specified in the file LICENSE.nxcomp which comes in the       */
+/* source distribution.                                                   */
+/*                                                                        */
+/* All rights reserved.                                                   */
+/*                                                                        */
+/* NOTE: This software has received contributions from various other      */
+/* contributors, only the core maintainers and supporters are listed as   */
+/* copyright holders. Please contact us, if you feel you should be listed */
+/* as copyright holder, as well.                                          */
+/*                                                                        */
+/**************************************************************************/
+
+#ifndef NXalert_H
+#define NXalert_H
+
+#define ALERT_CAPTION_PREFIX                                 "NX - "
+
+#define INTERNAL_ERROR_ALERT                                 1
+#define INTERNAL_ERROR_ALERT_TYPE                            "error"
+#define INTERNAL_ERROR_ALERT_STRING                          \
+"\
+An unrecoverable internal error was detected.\n\
+Press OK to terminate the current session.\n\
+"
+
+#define CLOSE_DEAD_X_CONNECTION_CLIENT_ALERT                 2
+#define CLOSE_DEAD_X_CONNECTION_CLIENT_ALERT_TYPE            "yesno"
+#define CLOSE_DEAD_X_CONNECTION_CLIENT_ALERT_STRING          \
+"\
+One of the applications currently in use is not responding.\n\
+Do you want to terminate the current session?\n\
+"
+
+#define CLOSE_DEAD_X_CONNECTION_SERVER_ALERT                 3
+#define CLOSE_DEAD_X_CONNECTION_SERVER_ALERT_TYPE            "yesno"
+#define CLOSE_DEAD_X_CONNECTION_SERVER_ALERT_STRING          \
+"\
+One of the applications did not behave correctly and caused\n\
+the X server to stop responding in a timely fashion. Do you\n\
+want to terminate the current session?\n\
+"
+
+#define CLOSE_DEAD_PROXY_CONNECTION_CLIENT_ALERT             4
+#define CLOSE_DEAD_PROXY_CONNECTION_CLIENT_ALERT_TYPE        NULL
+#define CLOSE_DEAD_PROXY_CONNECTION_CLIENT_ALERT_STRING      NULL
+
+#define CLOSE_DEAD_PROXY_CONNECTION_SERVER_ALERT             5
+#define CLOSE_DEAD_PROXY_CONNECTION_SERVER_ALERT_TYPE        "yesno"
+#define CLOSE_DEAD_PROXY_CONNECTION_SERVER_ALERT_STRING      \
+"\
+No response received from the remote server.\n\
+Do you want to terminate the current session?\n\
+"
+
+#define RESTART_DEAD_PROXY_CONNECTION_CLIENT_ALERT           6
+#define RESTART_DEAD_PROXY_CONNECTION_CLIENT_ALERT_TYPE      NULL
+#define RESTART_DEAD_PROXY_CONNECTION_CLIENT_ALERT_STRING    NULL
+
+#define RESTART_DEAD_PROXY_CONNECTION_SERVER_ALERT           7
+#define RESTART_DEAD_PROXY_CONNECTION_SERVER_ALERT_TYPE      "yesno"
+#define RESTART_DEAD_PROXY_CONNECTION_SERVER_ALERT_STRING    \
+"\
+Connection with remote server was shut down. NX will try\n\
+to establish a new server connection. Session could have\n\
+been left in a unusable state. Do you want to terminate\n\
+the session?\n\
+"
+
+#define CLOSE_UNRESPONSIVE_X_SERVER_ALERT                    8
+#define CLOSE_UNRESPONSIVE_X_SERVER_ALERT_TYPE               "panic"
+#define CLOSE_UNRESPONSIVE_X_SERVER_ALERT_STRING             \
+"\
+You pressed the key sequence CTRL+ALT+SHIFT+ESC.\n\
+This is probably because your X server has become\n\
+unresponsive. Session will be terminated in 30\n\
+seconds unless you abort the procedure by pressing\n\
+the Cancel button.\n\
+"
+
+#define WRONG_PROXY_VERSION_ALERT                            9
+#define WRONG_PROXY_VERSION_ALERT_TYPE                       "ok"
+#define WRONG_PROXY_VERSION_ALERT_STRING                     \
+"\
+Local NX libraries version " VERSION " do not match the NX\n\
+version of the remote server. Please check the error\n\
+log on the server to find out which client version you\n\
+need to install to be able to access this server.\n\
+"
+
+#define FAILED_PROXY_CONNECTION_CLIENT_ALERT                 10
+#define FAILED_PROXY_CONNECTION_CLIENT_ALERT_TYPE            NULL
+#define FAILED_PROXY_CONNECTION_CLIENT_ALERT_STRING          NULL
+
+#define FAILED_PROXY_CONNECTION_SERVER_ALERT                 11
+#define FAILED_PROXY_CONNECTION_SERVER_ALERT_TYPE            "yesno"
+#define FAILED_PROXY_CONNECTION_SERVER_ALERT_STRING          \
+"\
+Could not yet establish the connection to the remote\n\
+proxy. Do you want to terminate the current session?\n\
+"
+
+#define MISSING_PROXY_CACHE_ALERT                            12
+#define MISSING_PROXY_CACHE_ALERT_TYPE                       "ok"
+#define MISSING_PROXY_CACHE_ALERT_STRING                     \
+"\
+NX was unable to negotiate a cache for this session.\n\
+This may happen if this is the first time you run a\n\
+session on this server or if cache was corrupted or\n\
+produced by an incompatible NX version.\n\
+"
+
+#define ABORT_PROXY_CONNECTION_ALERT                         13
+#define ABORT_PROXY_CONNECTION_ALERT_TYPE                    "ok"
+#define ABORT_PROXY_CONNECTION_ALERT_STRING                  \
+"\
+The connection with the remote server was shut down.\n\
+Please check the state of your network connection.\n\
+"
+
+/*
+ * The one below is a special alert, used to close
+ * a previous alert that is running on the given
+ * side. This can be used to get rid of a message
+ * that has ceased to hold true.
+ */
+
+#define DISPLACE_MESSAGE_ALERT                               14
+#define DISPLACE_MESSAGE_ALERT_TYPE                          NULL
+#define DISPLACE_MESSAGE_ALERT_STRING                        NULL
+
+/*
+ * These are the other alert messages that were
+ * added in the 1.5.0 release. The first is never
+ * shown and is intended just for testing.
+ */
+
+#define GREETING_MESSAGE_ALERT                               15
+#define GREETING_MESSAGE_ALERT_TYPE                          "ok"
+#define GREETING_MESSAGE_ALERT_STRING                        \
+"\
+Welcome to NX from the NoMachine team. We really\n\
+hope you will enjoy this wonderful software as much\n\
+as we had fun making it ;-).\n\
+"
+
+/*
+ * These alerts are intended to notify the user
+ * of the reason why the agent failed to resume
+ * the session.
+ */
+
+#define START_RESUME_SESSION_ALERT                           16
+#define START_RESUME_SESSION_ALERT_TYPE                      "ok"
+#define START_RESUME_SESSION_ALERT_STRING                    \
+"\
+You appear to run your NX session across a slow network\n\
+connection. Resuming the session may require some time.\n\
+Please wait.\
+"
+
+#define FAILED_RESUME_DISPLAY_ALERT                          17
+#define FAILED_RESUME_DISPLAY_ALERT_TYPE                     "error"
+#define FAILED_RESUME_DISPLAY_ALERT_STRING                   \
+"\
+Failed to open the display. Can't resume the NX\n\
+session on this display.\n\
+"
+
+#define FAILED_RESUME_DISPLAY_BROKEN_ALERT                   18
+#define FAILED_RESUME_DISPLAY_BROKEN_TYPE                    "error"
+#define FAILED_RESUME_DISPLAY_BROKEN_STRING                  \
+"\
+The display connection was broken while trying to\n\
+resume the session. Please, check your network\n\
+connection and try again.\n\
+"
+
+#define FAILED_RESUME_VISUALS_ALERT                          19
+#define FAILED_RESUME_VISUALS_ALERT_TYPE                     "error"
+#define FAILED_RESUME_VISUALS_ALERT_STRING                   \
+"\
+Failed to restore all the required visuals.\n\
+Can't resume the NX session on this display.\n\
+"
+
+#define FAILED_RESUME_COLORMAPS_ALERT                        20
+#define FAILED_RESUME_COLORMAPS_ALERT_TYPE                   "error"
+#define FAILED_RESUME_COLORMAPS_ALERT_STRING                 \
+"\
+The number of available colormaps is different\n\
+on the new display. Can't resume the NX session\n\
+on this display.\n\
+"
+
+#define FAILED_RESUME_PIXMAPS_ALERT                          21
+#define FAILED_RESUME_PIXMAPS_ALERT_TYPE                     "error"
+#define FAILED_RESUME_PIXMAPS_ALERT_STRING                   \
+"\
+Failed to restore all the required pixmap formats.\n\
+Can't resume the NX session on this display.\n\
+"
+
+#define FAILED_RESUME_DEPTHS_ALERT                           22
+#define FAILED_RESUME_DEPTHS_ALERT_TYPE                      "error"
+#define FAILED_RESUME_DEPTHS_ALERT_STRING                    \
+"\
+Failed to restore all the required screen depths.\n\
+Can't resume the NX session on this display.\n\
+"
+
+#define FAILED_RESUME_RENDER_ALERT                           23
+#define FAILED_RESUME_RENDER_ALERT_TYPE                      "error"
+#define FAILED_RESUME_RENDER_ALERT_STRING                    \
+"\
+The render extension is missing or an incompatible\n\
+version was detected on your X server. Can't resume\n\
+the NX session on this display.\n\
+"
+
+#define FAILED_RESUME_FONTS_ALERT                            24
+#define FAILED_RESUME_FONTS_ALERT_TYPE                       "error"
+#define FAILED_RESUME_FONTS_ALERT_STRING                     \
+"\
+One or more of the fonts that are in use by the\n\
+session are missing. Can't resume the NX session\n\
+on this display.\n\
+"
+
+#define ABORT_PROXY_NEGOTIATION_ALERT                        62
+#define ABORT_PROXY_NEGOTIATION_ALERT_TYPE                   "ok"
+#define ABORT_PROXY_NEGOTIATION_ALERT_STRING                 \
+"\
+The remote proxy closed the connection while negotiating\n\
+the session. This may be due to the wrong authentication\n\
+credentials passed to the server.\n\
+"
+
+#define ABORT_PROXY_SHUTDOWN_ALERT                           64
+#define ABORT_PROXY_SHUTDOWN_ALERT_TYPE                      "ok"
+#define ABORT_PROXY_SHUTDOWN_ALERT_STRING                    \
+"\
+No response received from the remote proxy while\n\
+waiting for the session shutdown.\n\
+"
+
+#define FAILED_XDMCP_CONNECTION_ALERT                        65
+#define FAILED_XDMCP_CONNECTION_ALERT_TYPE                   "ok"
+#define FAILED_XDMCP_CONNECTION_ALERT_STRING                 \
+"\
+The XDM host that was contacted by the NX server doesn't\n\
+seem to be able to start the session. Please check your\n\
+server configuration.\n\
+"
+
+/*
+ * Used to handle the backward compatibility.
+ * Update the numbers if you add a new alert. 
+ */
+
+#define LAST_PROTO_STEP_6_ALERT  63
+#define LAST_PROTO_STEP_7_ALERT  65
+
+#endif /* NXalert_H */
diff --git a/nxcomp/include/NXpack.h b/nxcomp/include/NXpack.h
new file mode 100644
index 000000000..3eade6855
--- /dev/null
+++ b/nxcomp/include/NXpack.h
@@ -0,0 +1,141 @@
+/**************************************************************************/
+/*                                                                        */
+/* Copyright (c) 2001, 2011 NoMachine (http://www.nomachine.com)          */
+/* Copyright (c) 2008-2014 Oleksandr Shneyder <o.shneyder@phoca-gmbh.de>  */
+/* Copyright (c) 2014-2016 Ulrich Sibiller <uli42@gmx.de>                 */
+/* Copyright (c) 2014-2016 Mihai Moldovan <ionic@ionic.de>                */
+/* Copyright (c) 2011-2016 Mike Gabriel <mike.gabriel@das-netzwerkteam.de>*/
+/* Copyright (c) 2015-2016 Qindel Group (http://www.qindel.com)           */
+/*                                                                        */
+/* NXCOMP, NX protocol compression and NX extensions to this software     */
+/* are copyright of the aforementioned persons and companies.             */
+/*                                                                        */
+/* Redistribution and use of the present software is allowed according    */
+/* to terms specified in the file LICENSE.nxcomp which comes in the       */
+/* source distribution.                                                   */
+/*                                                                        */
+/* All rights reserved.                                                   */
+/*                                                                        */
+/* NOTE: This software has received contributions from various other      */
+/* contributors, only the core maintainers and supporters are listed as   */
+/* copyright holders. Please contact us, if you feel you should be listed */
+/* as copyright holder, as well.                                          */
+/*                                                                        */
+/**************************************************************************/
+
+#ifndef NXpack_H
+#define NXpack_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define MASK_METHOD_LIMIT                       10
+
+#define NO_MASK                                 0
+
+#define MASK_8_COLORS                           1
+#define MASK_64_COLORS                          2
+#define MASK_256_COLORS                         3
+#define MASK_512_COLORS                         4
+#define MASK_4K_COLORS                          5
+#define MASK_32K_COLORS                         6
+#define MASK_64K_COLORS                         7
+#define MASK_256K_COLORS                        8
+#define MASK_2M_COLORS                          9
+#define MASK_16M_COLORS                         10
+
+#define PACK_METHOD_LIMIT                       128
+
+#define NO_PACK                                 0
+
+#define PACK_MASKED_8_COLORS                    1
+#define PACK_MASKED_64_COLORS                   2
+#define PACK_MASKED_256_COLORS                  3
+#define PACK_MASKED_512_COLORS                  4
+#define PACK_MASKED_4K_COLORS                   5
+#define PACK_MASKED_32K_COLORS                  6
+#define PACK_MASKED_64K_COLORS                  7
+#define PACK_MASKED_256K_COLORS                 8
+#define PACK_MASKED_2M_COLORS                   9
+#define PACK_MASKED_16M_COLORS                  10
+
+#define PACK_RAW_8_BITS                         3
+#define PACK_RAW_16_BITS                        7
+#define PACK_RAW_24_BITS                        10
+
+#define PACK_COLORMAP_256_COLORS                11
+
+#define PACK_JPEG_8_COLORS                      26
+#define PACK_JPEG_64_COLORS                     27
+#define PACK_JPEG_256_COLORS                    28
+#define PACK_JPEG_512_COLORS                    29
+#define PACK_JPEG_4K_COLORS                     30
+#define PACK_JPEG_32K_COLORS                    31
+#define PACK_JPEG_64K_COLORS                    32
+#define PACK_JPEG_256K_COLORS                   33
+#define PACK_JPEG_2M_COLORS                     34
+#define PACK_JPEG_16M_COLORS                    35
+
+#define PACK_PNG_8_COLORS                       37
+#define PACK_PNG_64_COLORS                      38
+#define PACK_PNG_256_COLORS                     39
+#define PACK_PNG_512_COLORS                     40
+#define PACK_PNG_4K_COLORS                      41
+#define PACK_PNG_32K_COLORS                     42
+#define PACK_PNG_64K_COLORS                     43
+#define PACK_PNG_256K_COLORS                    44
+#define PACK_PNG_2M_COLORS                      45
+#define PACK_PNG_16M_COLORS                     46
+
+#define PACK_RGB_16M_COLORS                     63
+#define PACK_RLE_16M_COLORS                     64
+
+#define PACK_ALPHA                              65
+#define PACK_COLORMAP                           66
+
+#define PACK_BITMAP_16M_COLORS                  67
+
+/*
+ * Not really pack methods. These values
+ * allow dynamic selection of the pack
+ * method by the agent.
+ */
+
+#define PACK_NONE                               0
+#define PACK_LOSSY                              253
+#define PACK_LOSSLESS                           254
+#define PACK_ADAPTIVE                           255
+
+/*
+ * Reduce the number of colors in the
+ * image by applying a mask.
+ */
+
+typedef struct
+{
+  unsigned int color_mask;
+  unsigned int correction_mask;
+  unsigned int white_threshold;
+  unsigned int black_threshold;
+
+} ColorMask;
+
+extern const ColorMask Mask8TrueColor;
+extern const ColorMask Mask64TrueColor;
+extern const ColorMask Mask512TrueColor;
+extern const ColorMask Mask4KTrueColor;
+extern const ColorMask Mask32KTrueColor;
+extern const ColorMask Mask256KTrueColor;
+extern const ColorMask Mask2MTrueColor;
+extern const ColorMask Mask16MTrueColor;
+
+const ColorMask *MethodColorMask(unsigned int method);
+
+int MethodBitsPerPixel(unsigned int method);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* NXpack_H */
diff --git a/nxcomp/include/NXproto.h b/nxcomp/include/NXproto.h
new file mode 100644
index 000000000..7b988bdbf
--- /dev/null
+++ b/nxcomp/include/NXproto.h
@@ -0,0 +1,447 @@
+/**************************************************************************/
+/*                                                                        */
+/* Copyright (c) 2001, 2011 NoMachine (http://www.nomachine.com)          */
+/* Copyright (c) 2008-2014 Oleksandr Shneyder <o.shneyder@phoca-gmbh.de>  */
+/* Copyright (c) 2014-2016 Ulrich Sibiller <uli42@gmx.de>                 */
+/* Copyright (c) 2014-2016 Mihai Moldovan <ionic@ionic.de>                */
+/* Copyright (c) 2011-2016 Mike Gabriel <mike.gabriel@das-netzwerkteam.de>*/
+/* Copyright (c) 2015-2016 Qindel Group (http://www.qindel.com)           */
+/*                                                                        */
+/* NXCOMP, NX protocol compression and NX extensions to this software     */
+/* are copyright of the aforementioned persons and companies.             */
+/*                                                                        */
+/* Redistribution and use of the present software is allowed according    */
+/* to terms specified in the file LICENSE.nxcomp which comes in the       */
+/* source distribution.                                                   */
+/*                                                                        */
+/* All rights reserved.                                                   */
+/*                                                                        */
+/* NOTE: This software has received contributions from various other      */
+/* contributors, only the core maintainers and supporters are listed as   */
+/* copyright holders. Please contact us, if you feel you should be listed */
+/* as copyright holder, as well.                                          */
+/*                                                                        */
+/**************************************************************************/
+
+#ifndef NXproto_H
+#define NXproto_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <X11/X.h>
+#include <X11/Xmd.h>
+#include <X11/Xproto.h>
+
+/*
+ * Force the size to match the wire protocol.
+ */
+ 
+#define Drawable CARD32
+#define GContext CARD32
+
+#define sz_xNXGetControlParametersReq           4
+#define sz_xNXGetCleanupParametersReq           4
+#define sz_xNXGetImageParametersReq             4
+#define sz_xNXGetUnpackParametersReq            8
+#define sz_xNXGetShmemParametersReq             16
+#define sz_xNXGetFontParametersReq              4
+#define sz_xNXSetExposeParametersReq            8
+#define sz_xNXSetCacheParametersReq             8
+#define sz_xNXStartSplitReq                     8
+#define sz_xNXEndSplitReq                       4
+#define sz_xNXCommitSplitReq                    12
+#define sz_xNXSetUnpackGeometryReq              24
+#define sz_xNXSetUnpackColormapReq              16
+#define sz_xNXSetUnpackAlphaReq                 16
+#define sz_xNXPutPackedImageReq                 40
+#define sz_xNXFreeUnpackReq                     4
+#define sz_xNXFinishSplitReq                    4
+#define sz_xNXAbortSplitReq                     4
+#define sz_xNXFreeSplitReq                      4
+
+#define sz_xGetControlParametersReply           32
+#define sz_xGetCleanupParametersReply           32
+#define sz_xGetImageParametersReply             32
+#define sz_xGetUnpackParametersReply            32
+#define sz_xGetShmemParametersReply             32
+
+#define LINK_TYPE_LIMIT                         5
+
+#define LINK_TYPE_NONE                          0
+#define LINK_TYPE_MODEM                         1
+#define LINK_TYPE_ISDN                          2
+#define LINK_TYPE_ADSL                          3
+#define LINK_TYPE_WAN                           4
+#define LINK_TYPE_LAN                           5
+
+/*
+ * NX Replies.
+ */
+
+/*
+ * The following reply has 4 new boolean
+ * fields in the last protocol version.
+ */
+
+typedef struct _NXGetControlParametersReply {
+    BYTE   type; /* Is X_Reply. */
+    CARD8  linkType;
+    CARD16 sequenceNumber B16;
+    CARD32 length B32; /* Is 0. */
+    CARD8  localMajor;
+    CARD8  localMinor;
+    CARD8  localPatch;
+    CARD8  remoteMajor;
+    CARD8  remoteMinor;
+    CARD8  remotePatch;
+    CARD16 splitTimeout B16;
+    CARD16 motionTimeout B16;
+    CARD8  splitMode;
+    CARD8  pad1;
+    CARD32 splitSize B32;
+    CARD8  packMethod;
+    CARD8  packQuality;
+    CARD8  dataLevel;
+    CARD8  streamLevel;
+    CARD8  deltaLevel;
+    CARD8  loadCache;
+    CARD8  saveCache;
+    CARD8  startupCache;
+} xNXGetControlParametersReply;
+
+typedef struct _NXGetCleanupParametersReply {
+    BYTE   type; /* Is X_Reply. */
+    BYTE   pad;
+    CARD16 sequenceNumber B16;
+    CARD32 length B32; /* Is 0. */
+    BOOL   cleanGet;
+    BOOL   cleanAlloc;
+    BOOL   cleanFlush;
+    BOOL   cleanSend;
+    BOOL   cleanImages;
+    BYTE   pad1, pad2, pad3;
+    CARD32 pad4 B32;
+    CARD32 pad5 B32;
+    CARD32 pad6 B32;
+    CARD32 pad7 B32;
+} xNXGetCleanupParametersReply;
+
+typedef struct _NXGetImageParametersReply {
+    BYTE   type; /* Is X_Reply. */
+    BYTE   pad;
+    CARD16 sequenceNumber B16;
+    CARD32 length B32; /* Is 0. */
+    BOOL   imageSplit;
+    BOOL   imageMask;
+    BOOL   imageFrame;
+    CARD8  imageMaskMethod;
+    CARD8  imageSplitMethod;
+    BYTE   pad1, pad2, pad3;
+    CARD32 pad4 B32;
+    CARD32 pad5 B32;
+    CARD32 pad6 B32;
+    CARD32 pad7 B32;
+} xNXGetImageParametersReply;
+
+/*
+ * Data is made of PACK_METHOD_LIMIT values of
+ * type BOOL telling which unpack capabilities
+ * are implemented in proxy.
+ */
+
+typedef struct _NXGetUnpackParametersReply {
+    BYTE   type; /* Is X_Reply. */
+    BYTE   pad;
+    CARD16 sequenceNumber B16;
+    CARD32 length B32; /* Is PACK_METHOD_LIMIT / 4 from NXpack.h. */
+    CARD8  entries;    /* Is PACK_METHOD_LIMIT. */
+    BYTE   pad1, pad2, pad3;
+    CARD32 pad4 B32;
+    CARD32 pad5 B32;
+    CARD32 pad6 B32;
+    CARD32 pad7 B32;
+    CARD32 pad8 B32;
+} xNXGetUnpackParametersReply;
+
+typedef struct _NXGetShmemParametersReply {
+    BYTE   type;             /* Is X_Reply. */
+    CARD8  stage;            /* As in the corresponding request. */
+    CARD16 sequenceNumber B16;
+    CARD32 length B32;       /* Is 0. */
+    BOOL   clientEnabled;    /* SHM on path agent to proxy.      */
+    BOOL   serverEnabled;    /* SHM on path proxy to X server.   */
+    BYTE   pad1, pad2;       /* Previous values can be checked   */
+    CARD32 clientSize B32;   /* at end of stage 2.               */
+    CARD32 serverSize B32;
+    CARD32 pad3 B32;
+    CARD32 pad4 B32;
+    CARD32 pad5 B32;
+} xNXGetShmemParametersReply;
+
+typedef struct _NXGetFontParametersReply {
+    BYTE   type; /* Is X_Reply. */
+    BYTE   pad1;
+    CARD16 sequenceNumber B16;
+    CARD32 length B32; /* Is length of path string + 1 / 4. */
+    CARD32 pad2 B32;
+    CARD32 pad3 B32;
+    CARD32 pad4 B32;
+    CARD32 pad5 B32;
+    CARD32 pad6 B32;
+    CARD32 pad7 B32;
+} xNXGetFontParametersReply;
+
+/*
+ * NX Requests.
+ */
+
+typedef struct _NXGetControlParametersReq {
+    CARD8  reqType;
+    BYTE   pad;
+    CARD16 length B16;
+} xNXGetControlParametersReq;
+
+typedef struct _NXGetCleanupParametersReq {
+    CARD8  reqType;
+    BYTE   pad;
+    CARD16 length B16;
+} xNXGetCleanupParametersReq;
+
+typedef struct _NXGetImageParametersReq {
+    CARD8  reqType;
+    BYTE   pad;
+    CARD16 length B16;
+} xNXGetImageParametersReq;
+
+typedef struct _NXGetUnpackParametersReq {
+    CARD8  reqType;
+    BYTE   pad;
+    CARD16 length B16;
+    CARD8  entries;
+    BYTE   pad1, pad2, pad3;
+} xNXGetUnpackParametersReq;
+
+typedef struct _NXGetShmemParametersReq {
+    CARD8    reqType;
+    CARD8    stage;         /* It is between 0 and 2.     */
+    CARD16   length B16;
+    BOOL     enableClient;  /* X client side support is   */
+    BOOL     enableServer;  /* not implemented yet.       */
+    BYTE     pad1, pad2;
+    CARD32   clientSegment; /* XID identifying the shared */
+    CARD32   serverSegment; /* memory segments.           */
+} xNXGetShmemParametersReq;
+
+typedef struct _NXGetFontParametersReq {
+    CARD8    reqType;
+    CARD8    pad;
+    CARD16   length B16;
+} xNXGetFontParametersReq;
+
+/*
+ * The available split modes.
+ */
+
+#define NXSplitModeDefault              0
+#define NXSplitModeAsync                1
+#define NXSplitModeSync                 2
+
+typedef struct _NXStartSplitReq {
+    CARD8  reqType;
+    CARD8  resource;
+    CARD16 length B16;
+    CARD8  mode;
+    BYTE   pad1, pad2, pad3;
+} xNXStartSplitReq;
+
+typedef struct _NXEndSplitReq {
+    CARD8  reqType;
+    CARD8  resource;
+    CARD16 length B16;
+} xNXEndSplitReq;
+
+typedef struct _NXCommitSplitReq {
+    CARD8  reqType;
+    CARD8  resource;
+    CARD16 length B16;
+    CARD8  propagate;
+    CARD8  request;
+    BYTE   pad1, pad2;
+    CARD32 position B32;
+} xNXCommitSplitReq;
+
+typedef struct _NXFinishSplitReq {
+    CARD8  reqType;
+    CARD8  resource;
+    CARD16 length B16;
+} xNXFinishSplitReq;
+
+typedef struct _NXAbortSplitReq {
+    CARD8  reqType;
+    CARD8  resource;
+    CARD16 length B16;
+} xNXAbortSplitReq;
+
+typedef struct _NXFreeSplitReq {
+    CARD8  reqType;
+    CARD8  resource;
+    CARD16 length B16;
+} xNXFreeSplitReq;
+
+typedef struct _NXSetExposeParametersReq {
+    CARD8  reqType;
+    BYTE   pad;
+    CARD16 length B16;
+    BOOL   expose;
+    BOOL   graphicsExpose;
+    BOOL   noExpose;
+    BYTE   pad1;
+} xNXSetExposeParametersReq;
+
+typedef struct _NXSetCacheParametersReq {
+    CARD8  reqType;
+    BYTE   pad;
+    CARD16 length B16;
+    BOOL   enableCache;
+    BOOL   enableSplit;
+    BOOL   enableSave;
+    BOOL   enableLoad;
+} xNXSetCacheParametersReq;
+
+typedef struct _NXSetUnpackGeometryReq {
+    CARD8  reqType;
+    CARD8  resource;
+    CARD16 length B16;
+    CARD8  depth1Bpp;
+    CARD8  depth4Bpp;
+    CARD8  depth8Bpp;
+    CARD8  depth16Bpp;
+    CARD8  depth24Bpp;
+    CARD8  depth32Bpp;
+    BYTE   pad1, pad2;
+    CARD32 redMask B32;
+    CARD32 greenMask B32;
+    CARD32 blueMask B32;
+} xNXSetUnpackGeometryReq;
+
+typedef struct _NXSetUnpackColormapReq {
+    CARD8  reqType;
+    CARD8  resource;
+    CARD16 length B16;
+    CARD8  method;
+    BYTE   pad1, pad2, pad3;
+    CARD32 srcLength B32;
+    CARD32 dstLength B32;
+} xNXSetUnpackColormapReq;
+
+typedef struct _NXSetUnpackAlphaReq {
+    CARD8  reqType;
+    CARD8  resource;
+    CARD16 length B16;
+    CARD8  method;
+    BYTE   pad1, pad2, pad3;
+    CARD32 srcLength B32;
+    CARD32 dstLength B32;
+} xNXSetUnpackAlphaReq;
+
+typedef struct _NXPutPackedImageReq {
+    CARD8    reqType;
+    CARD8    resource;
+    CARD16   length B16;
+    Drawable drawable B32;
+    GContext gc B32;
+    CARD8    method;
+    CARD8    format;
+    CARD8    srcDepth;
+    CARD8    dstDepth;
+    CARD32   srcLength B32;
+    CARD32   dstLength B32;
+    INT16    srcX B16, srcY B16;
+    CARD16   srcWidth B16, srcHeight B16;
+    INT16    dstX B16, dstY B16;
+    CARD16   dstWidth B16, dstHeight B16;
+} xNXPutPackedImageReq;
+
+typedef struct _NXFreeUnpackReq {
+    CARD8  reqType;
+    CARD8  resource;
+    CARD16 length B16;
+} xNXFreeUnpackReq;
+
+/*
+ * The X_NXSplitData and X_NXSplitEvent opcodes
+ * are used internally and are ignored if coming
+ * from the agent.
+ */
+
+#define X_NXInternalGenericData         0
+#define X_NXInternalGenericReply        1
+#define X_NXInternalGenericRequest      255
+
+#define X_NXInternalShapeExtension      128
+#define X_NXInternalRenderExtension     129
+
+#define X_NXFirstOpcode                 230
+#define X_NXLastOpcode                  252
+
+#define X_NXGetControlParameters        230
+#define X_NXGetCleanupParameters        231
+#define X_NXGetImageParameters          232
+#define X_NXGetUnpackParameters         233
+#define X_NXStartSplit                  234
+#define X_NXEndSplit                    235
+#define X_NXSplitData                   236
+#define X_NXCommitSplit                 237
+#define X_NXSetExposeParameters         240
+#define X_NXSetUnpackGeometry           241
+#define X_NXSetUnpackColormap           242
+#define X_NXPutPackedImage              243
+#define X_NXSplitEvent                  244
+#define X_NXGetShmemParameters          245
+#define X_NXSetUnpackAlpha              246
+#define X_NXFreeUnpack                  247
+#define X_NXFinishSplit                 248
+#define X_NXAbortSplit                  249
+#define X_NXFreeSplit                   250
+#define X_NXGetFontParameters           251
+#define X_NXSetCacheParameters          252
+
+/*
+ * The following events are received by the agent
+ * in the form of a ClientMessage with the value
+ * 0 in fields atom and window. The format is
+ * always 32. Event specific data starts at byte
+ * offset 12.
+ *
+ * These events are sent by the NX transport to
+ * notify the agent about the result of a split
+ * operation.
+ */
+
+#define NXNoSplitNotify                 1
+#define NXStartSplitNotify              2
+#define NXCommitSplitNotify             3
+#define NXEndSplitNotify                4
+#define NXEmptySplitNotify              5
+
+/*
+ * Notifications of collect events. These events
+ * don't come from the NX transport but are put
+ * back in client's event queue by NXlib.
+ */
+
+#define NXCollectImageNotify            8
+#define NXCollectPropertyNotify         9
+#define NXCollectGrabPointerNotify      10
+#define NXCollectInputFocusNotify       11
+
+#undef Drawable
+#undef GContext
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* NXproto_H */
diff --git a/nxcomp/include/NXvars.h b/nxcomp/include/NXvars.h
new file mode 100644
index 000000000..f514000d7
--- /dev/null
+++ b/nxcomp/include/NXvars.h
@@ -0,0 +1,201 @@
+/**************************************************************************/
+/*                                                                        */
+/* Copyright (c) 2001, 2011 NoMachine (http://www.nomachine.com)          */
+/* Copyright (c) 2008-2014 Oleksandr Shneyder <o.shneyder@phoca-gmbh.de>  */
+/* Copyright (c) 2014-2016 Ulrich Sibiller <uli42@gmx.de>                 */
+/* Copyright (c) 2014-2016 Mihai Moldovan <ionic@ionic.de>                */
+/* Copyright (c) 2011-2016 Mike Gabriel <mike.gabriel@das-netzwerkteam.de>*/
+/* Copyright (c) 2015-2016 Qindel Group (http://www.qindel.com)           */
+/*                                                                        */
+/* NXCOMP, NX protocol compression and NX extensions to this software     */
+/* are copyright of the aforementioned persons and companies.             */
+/*                                                                        */
+/* Redistribution and use of the present software is allowed according    */
+/* to terms specified in the file LICENSE.nxcomp which comes in the       */
+/* source distribution.                                                   */
+/*                                                                        */
+/* All rights reserved.                                                   */
+/*                                                                        */
+/* NOTE: This software has received contributions from various other      */
+/* contributors, only the core maintainers and supporters are listed as   */
+/* copyright holders. Please contact us, if you feel you should be listed */
+/* as copyright holder, as well.                                          */
+/*                                                                        */
+/**************************************************************************/
+
+#ifndef NXvars_H
+#define NXvars_H
+
+/*
+ * This can be included by the proxy or another
+ * layer that doesn't use Xlib.
+ */
+
+#if !defined(_XLIB_H_) && !defined(_XKBSRV_H_)
+
+#define NeedFunctionPrototypes  1
+
+#define Display  void
+
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Display flush policies.
+ */
+
+#define NXPolicyImmediate    1
+#define NXPolicyDeferred     2
+
+/*
+ * Type of flush.
+ */
+
+#define NXFlushBuffer        0
+#define NXFlushLink          1
+
+/*
+ * Type of statistics.
+ */
+
+#define NXStatisticsPartial  0
+#define NXStatisticsTotal    1
+
+/*
+ * Reason why the display is blocking.
+ */
+
+#define NXBlockRead          1
+#define NXBlockWrite         2
+
+/*
+ * Set if the client is interested in ignoring
+ * the display error and continue with the exe-
+ * cution of the program. By default the usual
+ * Xlib behaviour is gotten, and the library
+ * will call an exit().
+ */
+
+extern int _NXHandleDisplayError;
+
+/*
+ * The function below is called whenever Xlib is
+ * going to perform an I/O operation. The funct-
+ * ion can be redefined to include additional
+ * checks aimed at detecting if the display needs
+ * to be closed, for example because of an event
+ * or a signal mandating the end of the session.
+ * In this way the client program can regain the
+ * control before Xlib blocks waiting for input
+ * from the network.
+ */
+
+typedef int (*NXDisplayErrorPredicate)(
+#if NeedFunctionPrototypes
+    Display*            /* display */,
+    int                 /* reason */
+#endif
+);
+
+extern NXDisplayErrorPredicate _NXDisplayErrorFunction;
+
+/*
+ * This is called when Xlib is going to block
+ * waiting for the display to become readable or
+ * writable. The client can use the hook to run
+ * any arbitrary operation that may require some
+ * time to complete. The user should not try to
+ * read or write to the display inside the call-
+ * back routine.
+ */
+
+typedef void (*NXDisplayBlockHandler)(
+#if NeedFunctionPrototypes
+    Display*            /* display */,
+    int                 /* reason */
+#endif
+);
+
+extern NXDisplayBlockHandler _NXDisplayBlockFunction;
+
+/*
+ * Used to notify the program when more data
+ * is written to the socket.
+ */
+
+typedef void (*NXDisplayWriteHandler)(
+#if NeedFunctionPrototypes
+    Display*            /* display */,
+    int                 /* length */
+#endif
+);
+
+extern NXDisplayWriteHandler _NXDisplayWriteFunction;
+
+/*
+ * This callback is used to notify the agent
+ * that the proxy link has been flushed.
+ */
+
+typedef void (*NXDisplayFlushHandler)(
+#if NeedFunctionPrototypes
+    Display*            /* display */,
+    int                 /* length */
+#endif
+);
+
+extern NXDisplayFlushHandler _NXDisplayFlushFunction;
+
+/*
+ * Used by the NX transport to get an arbitrary
+ * string to add to its protocol statistics.
+ */
+
+typedef void (*NXDisplayStatisticsHandler)(
+#if NeedFunctionPrototypes
+    Display*            /* display */,
+    char*               /* buffer */,
+    int                 /* size */
+#endif
+);
+
+extern NXDisplayStatisticsHandler _NXDisplayStatisticsFunction;
+
+/*
+ * Let users redefine the function printing an
+ * error message in the case of a out-of-order
+ * sequence number.
+ */
+
+typedef void (*NXLostSequenceHandler)(
+#if NeedFunctionPrototypes
+    Display*            /* display */,
+    unsigned long       /* newseq */,
+    unsigned long       /* lastseq */,
+    unsigned int        /* type */
+#endif
+);
+
+extern NXLostSequenceHandler _NXLostSequenceFunction;
+
+/*
+ * Let the X server run the children processes
+ * (as for example the keyboard initialization
+ * utilities) by using the native system libra-
+ * ries, instead of the libraries shipped with
+ * the NX environment. If set, the Popen() in
+ * the X server will remove the LD_LIBRARY_PATH
+ * setting from the environment before calling
+ * the execl() function in the child process.
+ */
+
+extern int _NXUnsetLibraryPath;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* NXvars_H */