diff options
Diffstat (limited to 'debian/patches/018_nx-x11_update-libtool-ltmain-script.full.patch')
| -rw-r--r-- | debian/patches/018_nx-x11_update-libtool-ltmain-script.full.patch | 13985 |
1 files changed, 0 insertions, 13985 deletions
diff --git a/debian/patches/018_nx-x11_update-libtool-ltmain-script.full.patch b/debian/patches/018_nx-x11_update-libtool-ltmain-script.full.patch deleted file mode 100644 index 156712266..000000000 --- a/debian/patches/018_nx-x11_update-libtool-ltmain-script.full.patch +++ /dev/null @@ -1,13985 +0,0 @@ -Description: Update outdated libtool file - Replace libtool file at this location: - - nx-X11/extras/expat/conftools/ltmain.sh -Forwarded: pending... -Author: Mike Gabriel <mike.gabriel@das-netzwerkteam.de> -Last-Update: 2011-12-31 ---- a/nx-X11/extras/expat/conftools/ltmain.sh -+++ b/nx-X11/extras/expat/conftools/ltmain.sh -@@ -1,4631 +1,9435 @@ --# ltmain.sh - Provide generalized library-building support services. --# NOTE: Changing this file will not affect anything until you rerun configure. --# --# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 --# Free Software Foundation, Inc. --# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 --# --# This program is free software; you can redistribute it and/or modify -+ -+# libtool (GNU libtool) 2.4 -+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 -+ -+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, -+# 2007, 2008, 2009, 2010 Free Software Foundation, Inc. -+# This is free software; see the source for copying conditions. There is NO -+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -+ -+# GNU Libtool is free software; you can redistribute it and/or modify - # it under the terms of the GNU General Public License as published by - # the Free Software Foundation; either version 2 of the License, or - # (at your option) any later version. - # --# This program is distributed in the hope that it will be useful, but -+# As a special exception to the GNU General Public License, -+# if you distribute this file as part of a program or library that -+# is built using GNU Libtool, you may include this file under the -+# same distribution terms that you use for the rest of that program. -+# -+# GNU Libtool is distributed in the hope that it will be useful, but - # WITHOUT ANY WARRANTY; without even the implied warranty of - # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - # General Public License for more details. - # - # You should have received a copy of the GNU General Public License --# along with this program; if not, write to the Free Software --# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+# along with GNU Libtool; see the file COPYING. If not, a copy -+# can be downloaded from http://www.gnu.org/licenses/gpl.html, -+# or obtained by writing to the Free Software Foundation, Inc., -+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+ -+# Usage: $progname [OPTION]... [MODE-ARG]... - # --# As a special exception to the GNU General Public License, if you --# distribute this file as part of a program that contains a --# configuration script generated by Autoconf, you may include it under --# the same distribution terms that you use for the rest of that program. -- --# Check that we have a working $echo. --if test "X$1" = X--no-reexec; then -- # Discard the --no-reexec flag, and continue. -- shift --elif test "X$1" = X--fallback-echo; then -- # Avoid inline document here, it may be left over -- : --elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then -- # Yippee, $echo works! -- : -+# Provide generalized library-building support services. -+# -+# --config show all configuration variables -+# --debug enable verbose shell tracing -+# -n, --dry-run display commands without modifying any files -+# --features display basic configuration information and exit -+# --mode=MODE use operation mode MODE -+# --preserve-dup-deps don't remove duplicate dependency libraries -+# --quiet, --silent don't print informational messages -+# --no-quiet, --no-silent -+# print informational messages (default) -+# --tag=TAG use configuration variables from tag TAG -+# -v, --verbose print more informational messages than default -+# --no-verbose don't print the extra informational messages -+# --version print version information -+# -h, --help, --help-all print short, long, or detailed help message -+# -+# MODE must be one of the following: -+# -+# clean remove files from the build directory -+# compile compile a source file into a libtool object -+# execute automatically set library path, then run a program -+# finish complete the installation of libtool libraries -+# install install libraries or executables -+# link create a library or an executable -+# uninstall remove libraries from an installed directory -+# -+# MODE-ARGS vary depending on the MODE. When passed as first option, -+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. -+# Try `$progname --help --mode=MODE' for a more detailed description of MODE. -+# -+# When reporting a bug, please describe a test case to reproduce it and -+# include the following information: -+# -+# host-triplet: $host -+# shell: $SHELL -+# compiler: $LTCC -+# compiler flags: $LTCFLAGS -+# linker: $LD (gnu? $with_gnu_ld) -+# $progname: (GNU libtool) 2.4 Debian-2.4-2 -+# automake: $automake_version -+# autoconf: $autoconf_version -+# -+# Report bugs to <bug-libtool@gnu.org>. -+# GNU libtool home page: <http://www.gnu.org/software/libtool/>. -+# General help using GNU software: <http://www.gnu.org/gethelp/>. -+ -+PROGRAM=libtool -+PACKAGE=libtool -+VERSION="2.4 Debian-2.4-2" -+TIMESTAMP="" -+package_revision=1.3293 -+ -+# Be Bourne compatible -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST - else -- # Restart under the correct shell, and then maybe $echo will work. -- exec $SHELL "$0" --no-reexec ${1+"$@"} -+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac - fi -+BIN_SH=xpg4; export BIN_SH # for Tru64 -+DUALCASE=1; export DUALCASE # for MKS sh - --if test "X$1" = X--fallback-echo; then -- # used as fallback echo -- shift -- cat <<EOF --$* --EOF -- exit 0 --fi -+# A function that is used when there is no print builtin or printf. -+func_fallback_echo () -+{ -+ eval 'cat <<_LTECHO_EOF -+$1 -+_LTECHO_EOF' -+} - --# The name of this program. --progname=`$echo "$0" | sed 's%^.*/%%'` --modename="$progname" -+# NLS nuisances: We save the old values to restore during execute mode. -+lt_user_locale= -+lt_safe_locale= -+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES -+do -+ eval "if test \"\${$lt_var+set}\" = set; then -+ save_$lt_var=\$$lt_var -+ $lt_var=C -+ export $lt_var -+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" -+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" -+ fi" -+done -+LC_ALL=C -+LANGUAGE=C -+export LANGUAGE LC_ALL -+ -+$lt_unset CDPATH -+ -+ -+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -+# is ksh but when the shell is invoked as "sh" and the current value of -+# the _XPG environment variable is not equal to 1 (one), the special -+# positional parameter $0, within a function call, is the name of the -+# function. -+progpath="$0" - --# Constants. --PROGRAM=ltmain.sh --PACKAGE=libtool --VERSION=1.4.2 --TIMESTAMP=" (1.922.2.53 2001/09/11 03:18:52)" - --default_mode= --help="Try \`$progname --help' for more information." --magic="%%%MAGIC variable%%%" --mkdir="mkdir" --mv="mv -f" --rm="rm -f" - --# Sed substitution that helps us do robust quoting. It backslashifies --# metacharacters that are still active within double-quoted strings. --Xsed='sed -e 1s/^X//' --sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' --SP2NL='tr \040 \012' --NL2SP='tr \015\012 \040\040' -- --# NLS nuisances. --# Only set LANG and LC_ALL to C if already set. --# These must not be set unconditionally because not all systems understand --# e.g. LANG=C (notably SCO). --# We save the old values to restore during execute mode. --if test "${LC_ALL+set}" = set; then -- save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL --fi --if test "${LANG+set}" = set; then -- save_LANG="$LANG"; LANG=C; export LANG --fi -+: ${CP="cp -f"} -+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} -+: ${EGREP="/bin/grep -E"} -+: ${FGREP="/bin/grep -F"} -+: ${GREP="/bin/grep"} -+: ${LN_S="ln -s"} -+: ${MAKE="make"} -+: ${MKDIR="mkdir"} -+: ${MV="mv -f"} -+: ${RM="rm -f"} -+: ${SED="/bin/sed"} -+: ${SHELL="${CONFIG_SHELL-/bin/sh}"} -+: ${Xsed="$SED -e 1s/^X//"} -+ -+# Global variables: -+EXIT_SUCCESS=0 -+EXIT_FAILURE=1 -+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. -+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. - --# Make sure IFS has a sensible default --: ${IFS=" "} -+exit_status=$EXIT_SUCCESS - --if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then -- echo "$modename: not configured to build any kind of library" 1>&2 -- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 -- exit 1 --fi -+# Make sure IFS has a sensible default -+lt_nl=' -+' -+IFS=" $lt_nl" -+ -+dirname="s,/[^/]*$,," -+basename="s,^.*/,," -+ -+# func_dirname file append nondir_replacement -+# Compute the dirname of FILE. If nonempty, add APPEND to the result, -+# otherwise set result to NONDIR_REPLACEMENT. -+func_dirname () -+{ -+ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` -+ if test "X$func_dirname_result" = "X${1}"; then -+ func_dirname_result="${3}" -+ else -+ func_dirname_result="$func_dirname_result${2}" -+ fi -+} # func_dirname may be replaced by extended shell implementation - --# Global variables. --mode=$default_mode --nonopt= --prev= --prevopt= --run= --show="$echo" --show_help= --execute_dlfiles= --lo2o="s/\\.lo\$/.${objext}/" --o2lo="s/\\.${objext}\$/.lo/" - --# Parse our command line options once, thoroughly. --while test $# -gt 0 --do -- arg="$1" -- shift -+# func_basename file -+func_basename () -+{ -+ func_basename_result=`$ECHO "${1}" | $SED "$basename"` -+} # func_basename may be replaced by extended shell implementation -+ -+ -+# func_dirname_and_basename file append nondir_replacement -+# perform func_basename and func_dirname in a single function -+# call: -+# dirname: Compute the dirname of FILE. If nonempty, -+# add APPEND to the result, otherwise set result -+# to NONDIR_REPLACEMENT. -+# value returned in "$func_dirname_result" -+# basename: Compute filename of FILE. -+# value retuned in "$func_basename_result" -+# Implementation must be kept synchronized with func_dirname -+# and func_basename. For efficiency, we do not delegate to -+# those functions but instead duplicate the functionality here. -+func_dirname_and_basename () -+{ -+ # Extract subdirectory from the argument. -+ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` -+ if test "X$func_dirname_result" = "X${1}"; then -+ func_dirname_result="${3}" -+ else -+ func_dirname_result="$func_dirname_result${2}" -+ fi -+ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` -+} # func_dirname_and_basename may be replaced by extended shell implementation - -- case $arg in -- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; -- *) optarg= ;; -- esac - -- # If the previous option needs an argument, assign it. -- if test -n "$prev"; then -- case $prev in -- execute_dlfiles) -- execute_dlfiles="$execute_dlfiles $arg" -- ;; -- *) -- eval "$prev=\$arg" -- ;; -+# func_stripname prefix suffix name -+# strip PREFIX and SUFFIX off of NAME. -+# PREFIX and SUFFIX must not contain globbing or regex special -+# characters, hashes, percent signs, but SUFFIX may contain a leading -+# dot (in which case that matches only a dot). -+# func_strip_suffix prefix name -+func_stripname () -+{ -+ case ${2} in -+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; -+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; - esac -+} # func_stripname may be replaced by extended shell implementation - -- prev= -- prevopt= -- continue -- fi - -- # Have we seen a non-optional argument yet? -- case $arg in -- --help) -- show_help=yes -+# These SED scripts presuppose an absolute path with a trailing slash. -+pathcar='s,^/\([^/]*\).*$,\1,' -+pathcdr='s,^/[^/]*,,' -+removedotparts=':dotsl -+ s@/\./@/@g -+ t dotsl -+ s,/\.$,/,' -+collapseslashes='s@/\{1,\}@/@g' -+finalslash='s,/*$,/,' -+ -+# func_normal_abspath PATH -+# Remove doubled-up and trailing slashes, "." path components, -+# and cancel out any ".." path components in PATH after making -+# it an absolute path. -+# value returned in "$func_normal_abspath_result" -+func_normal_abspath () -+{ -+ # Start from root dir and reassemble the path. -+ func_normal_abspath_result= -+ func_normal_abspath_tpath=$1 -+ func_normal_abspath_altnamespace= -+ case $func_normal_abspath_tpath in -+ "") -+ # Empty path, that just means $cwd. -+ func_stripname '' '/' "`pwd`" -+ func_normal_abspath_result=$func_stripname_result -+ return - ;; -- -- --version) -- echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" -- exit 0 -+ # The next three entries are used to spot a run of precisely -+ # two leading slashes without using negated character classes; -+ # we take advantage of case's first-match behaviour. -+ ///*) -+ # Unusual form of absolute path, do nothing. - ;; -- -- --config) -- sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 -- exit 0 -+ //*) -+ # Not necessarily an ordinary path; POSIX reserves leading '//' -+ # and for example Cygwin uses it to access remote file shares -+ # over CIFS/SMB, so we conserve a leading double slash if found. -+ func_normal_abspath_altnamespace=/ - ;; -- -- --debug) -- echo "$progname: enabling shell trace mode" -- set -x -+ /*) -+ # Absolute path, do nothing. - ;; -- -- --dry-run | -n) -- run=: -+ *) -+ # Relative path, prepend $cwd. -+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath - ;; -- -- --features) -- echo "host: $host" -- if test "$build_libtool_libs" = yes; then -- echo "enable shared libraries" -- else -- echo "disable shared libraries" -- fi -- if test "$build_old_libs" = yes; then -- echo "enable static libraries" -- else -- echo "disable static libraries" -+ esac -+ # Cancel out all the simple stuff to save iterations. We also want -+ # the path to end with a slash for ease of parsing, so make sure -+ # there is one (and only one) here. -+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -+ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` -+ while :; do -+ # Processed it all yet? -+ if test "$func_normal_abspath_tpath" = / ; then -+ # If we ascended to the root using ".." the result may be empty now. -+ if test -z "$func_normal_abspath_result" ; then -+ func_normal_abspath_result=/ -+ fi -+ break - fi -- exit 0 -- ;; -+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ -+ -e "$pathcar"` -+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ -+ -e "$pathcdr"` -+ # Figure out what to do with it -+ case $func_normal_abspath_tcomponent in -+ "") -+ # Trailing empty path component, ignore it. -+ ;; -+ ..) -+ # Parent dir; strip last assembled component from result. -+ func_dirname "$func_normal_abspath_result" -+ func_normal_abspath_result=$func_dirname_result -+ ;; -+ *) -+ # Actual path component, append it. -+ func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent -+ ;; -+ esac -+ done -+ # Restore leading double-slash if one was found on entry. -+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result -+} - -- --finish) mode="finish" ;; -+# func_relative_path SRCDIR DSTDIR -+# generates a relative path from SRCDIR to DSTDIR, with a trailing -+# slash if non-empty, suitable for immediately appending a filename -+# without needing to append a separator. -+# value returned in "$func_relative_path_result" -+func_relative_path () -+{ -+ func_relative_path_result= -+ func_normal_abspath "$1" -+ func_relative_path_tlibdir=$func_normal_abspath_result -+ func_normal_abspath "$2" -+ func_relative_path_tbindir=$func_normal_abspath_result -+ -+ # Ascend the tree starting from libdir -+ while :; do -+ # check if we have found a prefix of bindir -+ case $func_relative_path_tbindir in -+ $func_relative_path_tlibdir) -+ # found an exact match -+ func_relative_path_tcancelled= -+ break -+ ;; -+ $func_relative_path_tlibdir*) -+ # found a matching prefix -+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" -+ func_relative_path_tcancelled=$func_stripname_result -+ if test -z "$func_relative_path_result"; then -+ func_relative_path_result=. -+ fi -+ break -+ ;; -+ *) -+ func_dirname $func_relative_path_tlibdir -+ func_relative_path_tlibdir=${func_dirname_result} -+ if test "x$func_relative_path_tlibdir" = x ; then -+ # Have to descend all the way to the root! -+ func_relative_path_result=../$func_relative_path_result -+ func_relative_path_tcancelled=$func_relative_path_tbindir -+ break -+ fi -+ func_relative_path_result=../$func_relative_path_result -+ ;; -+ esac -+ done - -- --mode) prevopt="--mode" prev=mode ;; -- --mode=*) mode="$optarg" ;; -+ # Now calculate path; take care to avoid doubling-up slashes. -+ func_stripname '' '/' "$func_relative_path_result" -+ func_relative_path_result=$func_stripname_result -+ func_stripname '/' '/' "$func_relative_path_tcancelled" -+ if test "x$func_stripname_result" != x ; then -+ func_relative_path_result=${func_relative_path_result}/${func_stripname_result} -+ fi - -- --quiet | --silent) -- show=: -- ;; -+ # Normalisation. If bindir is libdir, return empty string, -+ # else relative path ending with a slash; either way, target -+ # file name can be directly appended. -+ if test ! -z "$func_relative_path_result"; then -+ func_stripname './' '' "$func_relative_path_result/" -+ func_relative_path_result=$func_stripname_result -+ fi -+} - -- -dlopen) -- prevopt="-dlopen" -- prev=execute_dlfiles -- ;; -+# The name of this program: -+func_dirname_and_basename "$progpath" -+progname=$func_basename_result -+ -+# Make sure we have an absolute path for reexecution: -+case $progpath in -+ [\\/]*|[A-Za-z]:\\*) ;; -+ *[\\/]*) -+ progdir=$func_dirname_result -+ progdir=`cd "$progdir" && pwd` -+ progpath="$progdir/$progname" -+ ;; -+ *) -+ save_IFS="$IFS" -+ IFS=: -+ for progdir in $PATH; do -+ IFS="$save_IFS" -+ test -x "$progdir/$progname" && break -+ done -+ IFS="$save_IFS" -+ test -n "$progdir" || progdir=`pwd` -+ progpath="$progdir/$progname" -+ ;; -+esac - -- -*) -- $echo "$modename: unrecognized option \`$arg'" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -- ;; -+# Sed substitution that helps us do robust quoting. It backslashifies -+# metacharacters that are still active within double-quoted strings. -+Xsed="${SED}"' -e 1s/^X//' -+sed_quote_subst='s/\([`"$\\]\)/\\\1/g' - -- *) -- nonopt="$arg" -- break -- ;; -- esac --done -+# Same as above, but do not quote variable references. -+double_quote_subst='s/\(["`\\]\)/\\\1/g' - --if test -n "$prevopt"; then -- $echo "$modename: option \`$prevopt' requires an argument" 1>&2 -- $echo "$help" 1>&2 -- exit 1 --fi -+# Sed substitution that turns a string into a regex matching for the -+# string literally. -+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' -+ -+# Sed substitution that converts a w32 file name or path -+# which contains forward slashes, into one that contains -+# (escaped) backslashes. A very naive implementation. -+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' -+ -+# Re-`\' parameter expansions in output of double_quote_subst that were -+# `\'-ed in input to the same. If an odd number of `\' preceded a '$' -+# in input to double_quote_subst, that '$' was protected from expansion. -+# Since each input `\' is now two `\'s, look for any number of runs of -+# four `\'s followed by two `\'s and then a '$'. `\' that '$'. -+bs='\\' -+bs2='\\\\' -+bs4='\\\\\\\\' -+dollar='\$' -+sed_double_backslash="\ -+ s/$bs4/&\\ -+/g -+ s/^$bs2$dollar/$bs&/ -+ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g -+ s/\n//g" -+ -+# Standard options: -+opt_dry_run=false -+opt_help=false -+opt_quiet=false -+opt_verbose=false -+opt_warning=: -+ -+# func_echo arg... -+# Echo program name prefixed message, along with the current mode -+# name if it has been set yet. -+func_echo () -+{ -+ $ECHO "$progname: ${opt_mode+$opt_mode: }$*" -+} - --# If this variable is set in any of the actions, the command in it --# will be execed at the end. This prevents here-documents from being --# left over by shells. --exec_cmd= -+# func_verbose arg... -+# Echo program name prefixed message in verbose mode only. -+func_verbose () -+{ -+ $opt_verbose && func_echo ${1+"$@"} -+ -+ # A bug in bash halts the script if the last line of a function -+ # fails when set -e is in force, so we need another command to -+ # work around that: -+ : -+} - --if test -z "$show_help"; then -+# func_echo_all arg... -+# Invoke $ECHO with all args, space-separated. -+func_echo_all () -+{ -+ $ECHO "$*" -+} - -- # Infer the operation mode. -- if test -z "$mode"; then -- case $nonopt in -- *cc | *++ | gcc* | *-gcc*) -- mode=link -- for arg -- do -- case $arg in -- -c) -- mode=compile -- break -- ;; -- esac -- done -- ;; -- *db | *dbx | *strace | *truss) -- mode=execute -- ;; -- *install*|cp|mv) -- mode=install -- ;; -- *rm) -- mode=uninstall -- ;; -- *) -- # If we have no mode, but dlfiles were specified, then do execute mode. -- test -n "$execute_dlfiles" && mode=execute -+# func_error arg... -+# Echo program name prefixed message to standard error. -+func_error () -+{ -+ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 -+} - -- # Just use the default operation mode. -- if test -z "$mode"; then -- if test -n "$nonopt"; then -- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 -- else -- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 -- fi -- fi -- ;; -- esac -- fi -+# func_warning arg... -+# Echo program name prefixed warning message to standard error. -+func_warning () -+{ -+ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 - -- # Only execute mode is allowed to have -dlopen flags. -- if test -n "$execute_dlfiles" && test "$mode" != execute; then -- $echo "$modename: unrecognized option \`-dlopen'" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -- fi -+ # bash bug again: -+ : -+} - -- # Change the help message to a mode-specific one. -- generic_help="$help" -- help="Try \`$modename --help --mode=$mode' for more information." -- -- # These modes are in order of execution frequency so that they run quickly. -- case $mode in -- # libtool compile mode -- compile) -- modename="$modename: compile" -- # Get the compilation command and the source file. -- base_compile= -- prev= -- lastarg= -- srcfile="$nonopt" -- suppress_output= -+# func_fatal_error arg... -+# Echo program name prefixed message to standard error, and exit. -+func_fatal_error () -+{ -+ func_error ${1+"$@"} -+ exit $EXIT_FAILURE -+} - -- user_target=no -- for arg -- do -- case $prev in -- "") ;; -- xcompiler) -- # Aesthetically quote the previous argument. -- prev= -- lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` -+# func_fatal_help arg... -+# Echo program name prefixed message to standard error, followed by -+# a help hint, and exit. -+func_fatal_help () -+{ -+ func_error ${1+"$@"} -+ func_fatal_error "$help" -+} -+help="Try \`$progname --help' for more information." ## default - -- case $arg in -- # Double-quote args containing other shell metacharacters. -- # Many Bourne shells cannot handle close brackets correctly -- # in scan sets, so we specify it separately. -- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- arg="\"$arg\"" -- ;; -- esac - -- # Add the previous argument to base_compile. -- if test -z "$base_compile"; then -- base_compile="$lastarg" -- else -- base_compile="$base_compile $lastarg" -- fi -- continue -- ;; -+# func_grep expression filename -+# Check whether EXPRESSION matches any line of FILENAME, without output. -+func_grep () -+{ -+ $GREP "$1" "$2" >/dev/null 2>&1 -+} -+ -+ -+# func_mkdir_p directory-path -+# Make sure the entire path to DIRECTORY-PATH is available. -+func_mkdir_p () -+{ -+ my_directory_path="$1" -+ my_dir_list= -+ -+ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then -+ -+ # Protect directory names starting with `-' -+ case $my_directory_path in -+ -*) my_directory_path="./$my_directory_path" ;; - esac - -- # Accept any command-line options. -- case $arg in -- -o) -- if test "$user_target" != "no"; then -- $echo "$modename: you cannot specify \`-o' more than once" 1>&2 -- exit 1 -- fi -- user_target=next -- ;; -+ # While some portion of DIR does not yet exist... -+ while test ! -d "$my_directory_path"; do -+ # ...make a list in topmost first order. Use a colon delimited -+ # list incase some portion of path contains whitespace. -+ my_dir_list="$my_directory_path:$my_dir_list" - -- -static) -- build_old_libs=yes -- continue -- ;; -+ # If the last portion added has no slash in it, the list is done -+ case $my_directory_path in */*) ;; *) break ;; esac - -- -prefer-pic) -- pic_mode=yes -- continue -- ;; -+ # ...otherwise throw away the child directory and loop -+ my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` -+ done -+ my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` - -- -prefer-non-pic) -- pic_mode=no -- continue -- ;; -+ save_mkdir_p_IFS="$IFS"; IFS=':' -+ for my_dir in $my_dir_list; do -+ IFS="$save_mkdir_p_IFS" -+ # mkdir can fail with a `File exist' error if two processes -+ # try to create one of the directories concurrently. Don't -+ # stop in that case! -+ $MKDIR "$my_dir" 2>/dev/null || : -+ done -+ IFS="$save_mkdir_p_IFS" - -- -Xcompiler) -- prev=xcompiler -- continue -- ;; -+ # Bail out if we (or some other process) failed to create a directory. -+ test -d "$my_directory_path" || \ -+ func_fatal_error "Failed to create \`$1'" -+ fi -+} - -- -Wc,*) -- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` -- lastarg= -- save_ifs="$IFS"; IFS=',' -- for arg in $args; do -- IFS="$save_ifs" - -- # Double-quote args containing other shell metacharacters. -- # Many Bourne shells cannot handle close brackets correctly -- # in scan sets, so we specify it separately. -- case $arg in -- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- arg="\"$arg\"" -- ;; -- esac -- lastarg="$lastarg $arg" -- done -- IFS="$save_ifs" -- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` -+# func_mktempdir [string] -+# Make a temporary directory that won't clash with other running -+# libtool processes, and avoids race conditions if possible. If -+# given, STRING is the basename for that directory. -+func_mktempdir () -+{ -+ my_template="${TMPDIR-/tmp}/${1-$progname}" -+ -+ if test "$opt_dry_run" = ":"; then -+ # Return a directory name, but don't create it in dry-run mode -+ my_tmpdir="${my_template}-$$" -+ else - -- # Add the arguments to base_compile. -- if test -z "$base_compile"; then -- base_compile="$lastarg" -- else -- base_compile="$base_compile $lastarg" -- fi -- continue -- ;; -- esac -+ # If mktemp works, use that first and foremost -+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` - -- case $user_target in -- next) -- # The next one is the -o target name -- user_target=yes -- continue -- ;; -- yes) -- # We got the output file -- user_target=set -- libobj="$arg" -- continue -- ;; -- esac -+ if test ! -d "$my_tmpdir"; then -+ # Failing that, at least try and use $RANDOM to avoid a race -+ my_tmpdir="${my_template}-${RANDOM-0}$$" -+ -+ save_mktempdir_umask=`umask` -+ umask 0077 -+ $MKDIR "$my_tmpdir" -+ umask $save_mktempdir_umask -+ fi -+ -+ # If we're not in dry-run mode, bomb out on failure -+ test -d "$my_tmpdir" || \ -+ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" -+ fi - -- # Accept the current argument as the source file. -- lastarg="$srcfile" -- srcfile="$arg" -+ $ECHO "$my_tmpdir" -+} - -- # Aesthetically quote the previous argument. - -- # Backslashify any backslashes, double quotes, and dollar signs. -- # These are the only characters that are still specially -- # interpreted inside of double-quoted scrings. -- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` -+# func_quote_for_eval arg -+# Aesthetically quote ARG to be evaled later. -+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT -+# is double-quoted, suitable for a subsequent eval, whereas -+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters -+# which are still active within double quotes backslashified. -+func_quote_for_eval () -+{ -+ case $1 in -+ *[\\\`\"\$]*) -+ func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; -+ *) -+ func_quote_for_eval_unquoted_result="$1" ;; -+ esac - -- # Double-quote args containing other shell metacharacters. -+ case $func_quote_for_eval_unquoted_result in -+ # Double-quote args containing shell metacharacters to delay -+ # word splitting, command substitution and and variable -+ # expansion for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. -- case $lastarg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- lastarg="\"$lastarg\"" -- ;; -- esac -+ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" -+ ;; -+ *) -+ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" -+ esac -+} - -- # Add the previous argument to base_compile. -- if test -z "$base_compile"; then -- base_compile="$lastarg" -- else -- base_compile="$base_compile $lastarg" -- fi -- done - -- case $user_target in -- set) -- ;; -- no) -- # Get the name of the library object. -- libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` -- ;; -- *) -- $echo "$modename: you must specify a target with \`-o'" 1>&2 -- exit 1 -- ;; -+# func_quote_for_expand arg -+# Aesthetically quote ARG to be evaled later; same as above, -+# but do not quote variable references. -+func_quote_for_expand () -+{ -+ case $1 in -+ *[\\\`\"]*) -+ my_arg=`$ECHO "$1" | $SED \ -+ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; -+ *) -+ my_arg="$1" ;; - esac - -- # Recognize several different file suffixes. -- # If the user specifies -o file.o, it is replaced with file.lo -- xform='[cCFSfmso]' -- case $libobj in -- *.ada) xform=ada ;; -- *.adb) xform=adb ;; -- *.ads) xform=ads ;; -- *.asm) xform=asm ;; -- *.c++) xform=c++ ;; -- *.cc) xform=cc ;; -- *.cpp) xform=cpp ;; -- *.cxx) xform=cxx ;; -- *.f90) xform=f90 ;; -- *.for) xform=for ;; -+ case $my_arg in -+ # Double-quote args containing shell metacharacters to delay -+ # word splitting and command substitution for a subsequent eval. -+ # Many Bourne shells cannot handle close brackets correctly -+ # in scan sets, so we specify it separately. -+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -+ my_arg="\"$my_arg\"" -+ ;; - esac - -- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` -+ func_quote_for_expand_result="$my_arg" -+} - -- case $libobj in -- *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; -- *) -- $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 -- exit 1 -- ;; -- esac - -- if test -z "$base_compile"; then -- $echo "$modename: you must specify a compilation command" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -+# func_show_eval cmd [fail_exp] -+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -+# is given, then evaluate it. -+func_show_eval () -+{ -+ my_cmd="$1" -+ my_fail_exp="${2-:}" -+ -+ ${opt_silent-false} || { -+ func_quote_for_expand "$my_cmd" -+ eval "func_echo $func_quote_for_expand_result" -+ } -+ -+ if ${opt_dry_run-false}; then :; else -+ eval "$my_cmd" -+ my_status=$? -+ if test "$my_status" -eq 0; then :; else -+ eval "(exit $my_status); $my_fail_exp" -+ fi - fi -+} - -- # Delete any leftover library objects. -- if test "$build_old_libs" = yes; then -- removelist="$obj $libobj" -- else -- removelist="$libobj" -+ -+# func_show_eval_locale cmd [fail_exp] -+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -+# is given, then evaluate it. Use the saved locale for evaluation. -+func_show_eval_locale () -+{ -+ my_cmd="$1" -+ my_fail_exp="${2-:}" -+ -+ ${opt_silent-false} || { -+ func_quote_for_expand "$my_cmd" -+ eval "func_echo $func_quote_for_expand_result" -+ } -+ -+ if ${opt_dry_run-false}; then :; else -+ eval "$lt_user_locale -+ $my_cmd" -+ my_status=$? -+ eval "$lt_safe_locale" -+ if test "$my_status" -eq 0; then :; else -+ eval "(exit $my_status); $my_fail_exp" -+ fi - fi -+} - -- $run $rm $removelist -- trap "$run $rm $removelist; exit 1" 1 2 15 -+# func_tr_sh -+# Turn $1 into a string suitable for a shell variable name. -+# Result is stored in $func_tr_sh_result. All characters -+# not in the set a-zA-Z0-9_ are replaced with '_'. Further, -+# if $1 begins with a digit, a '_' is prepended as well. -+func_tr_sh () -+{ -+ case $1 in -+ [0-9]* | *[!a-zA-Z0-9_]*) -+ func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` -+ ;; -+ * ) -+ func_tr_sh_result=$1 -+ ;; -+ esac -+} - -- # On Cygwin there's no "real" PIC flag so we must build both object types -- case $host_os in -- cygwin* | mingw* | pw32* | os2*) -- pic_mode=default -- ;; -- esac -- if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then -- # non-PIC code in shared libraries is not supported -- pic_mode=default -- fi - -- # Calculate the filename of the output object if compiler does -- # not support -o with -c -- if test "$compiler_c_o" = no; then -- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} -- lockfile="$output_obj.lock" -- removelist="$removelist $output_obj $lockfile" -- trap "$run $rm $removelist; exit 1" 1 2 15 -- else -- need_locks=no -- lockfile= -- fi -+# func_version -+# Echo version message to standard output and exit. -+func_version () -+{ -+ $opt_debug -+ -+ $SED -n '/(C)/!b go -+ :more -+ /\./!{ -+ N -+ s/\n# / / -+ b more -+ } -+ :go -+ /^# '$PROGRAM' (GNU /,/# warranty; / { -+ s/^# // -+ s/^# *$// -+ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ -+ p -+ }' < "$progpath" -+ exit $? -+} - -- # Lock this critical section if it is needed -- # We use this script file to make the link, it avoids creating a new file -- if test "$need_locks" = yes; then -- until $run ln "$0" "$lockfile" 2>/dev/null; do -- $show "Waiting for $lockfile to be removed" -- sleep 2 -- done -- elif test "$need_locks" = warn; then -- if test -f "$lockfile"; then -- echo "\ --*** ERROR, $lockfile exists and contains: --`cat $lockfile 2>/dev/null` -+# func_usage -+# Echo short help message to standard output and exit. -+func_usage () -+{ -+ $opt_debug -+ -+ $SED -n '/^# Usage:/,/^# *.*--help/ { -+ s/^# // -+ s/^# *$// -+ s/\$progname/'$progname'/ -+ p -+ }' < "$progpath" -+ echo -+ $ECHO "run \`$progname --help | more' for full usage" -+ exit $? -+} - --This indicates that another process is trying to use the same --temporary object file, and libtool could not work around it because --your compiler does not support \`-c' and \`-o' together. If you --repeat this compilation, it may succeed, by chance, but you had better --avoid parallel builds (make -j) in this platform, or get a better --compiler." -- -- $run $rm $removelist -- exit 1 -- fi -- echo $srcfile > "$lockfile" -+# func_help [NOEXIT] -+# Echo long help message to standard output and exit, -+# unless 'noexit' is passed as argument. -+func_help () -+{ -+ $opt_debug -+ -+ $SED -n '/^# Usage:/,/# Report bugs to/ { -+ :print -+ s/^# // -+ s/^# *$// -+ s*\$progname*'$progname'* -+ s*\$host*'"$host"'* -+ s*\$SHELL*'"$SHELL"'* -+ s*\$LTCC*'"$LTCC"'* -+ s*\$LTCFLAGS*'"$LTCFLAGS"'* -+ s*\$LD*'"$LD"'* -+ s/\$with_gnu_ld/'"$with_gnu_ld"'/ -+ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ -+ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ -+ p -+ d -+ } -+ /^# .* home page:/b print -+ /^# General help using/b print -+ ' < "$progpath" -+ ret=$? -+ if test -z "$1"; then -+ exit $ret - fi -+} - -- if test -n "$fix_srcfile_path"; then -- eval srcfile=\"$fix_srcfile_path\" -- fi -+# func_missing_arg argname -+# Echo program name prefixed message to standard error and set global -+# exit_cmd. -+func_missing_arg () -+{ -+ $opt_debug - -- # Only build a PIC object if we are building libtool libraries. -- if test "$build_libtool_libs" = yes; then -- # Without this assignment, base_compile gets emptied. -- fbsd_hideous_sh_bug=$base_compile -+ func_error "missing argument for $1." -+ exit_cmd=exit -+} - -- if test "$pic_mode" != no; then -- # All platforms use -DPIC, to notify preprocessed assembler code. -- command="$base_compile $srcfile $pic_flag -DPIC" -- else -- # Don't build PIC code -- command="$base_compile $srcfile" -- fi -- if test "$build_old_libs" = yes; then -- lo_libobj="$libobj" -- dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` -- if test "X$dir" = "X$libobj"; then -- dir="$objdir" -- else -- dir="$dir/$objdir" -- fi -- libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` - -- if test -d "$dir"; then -- $show "$rm $libobj" -- $run $rm $libobj -- else -- $show "$mkdir $dir" -- $run $mkdir $dir -- status=$? -- if test $status -ne 0 && test ! -d $dir; then -- exit $status -- fi -- fi -- fi -- if test "$compiler_o_lo" = yes; then -- output_obj="$libobj" -- command="$command -o $output_obj" -- elif test "$compiler_c_o" = yes; then -- output_obj="$obj" -- command="$command -o $output_obj" -- fi -+# func_split_short_opt shortopt -+# Set func_split_short_opt_name and func_split_short_opt_arg shell -+# variables after splitting SHORTOPT after the 2nd character. -+func_split_short_opt () -+{ -+ my_sed_short_opt='1s/^\(..\).*$/\1/;q' -+ my_sed_short_rest='1s/^..\(.*\)$/\1/;q' -+ -+ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` -+ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` -+} # func_split_short_opt may be replaced by extended shell implementation -+ -+ -+# func_split_long_opt longopt -+# Set func_split_long_opt_name and func_split_long_opt_arg shell -+# variables after splitting LONGOPT at the `=' sign. -+func_split_long_opt () -+{ -+ my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' -+ my_sed_long_arg='1s/^--[^=]*=//' -+ -+ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` -+ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` -+} # func_split_long_opt may be replaced by extended shell implementation - -- $run $rm "$output_obj" -- $show "$command" -- if $run eval "$command"; then : -- else -- test -n "$output_obj" && $run $rm $removelist -- exit 1 -- fi -+exit_cmd=: - -- if test "$need_locks" = warn && -- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then -- echo "\ --*** ERROR, $lockfile contains: --`cat $lockfile 2>/dev/null` - --but it should contain: --$srcfile - --This indicates that another process is trying to use the same --temporary object file, and libtool could not work around it because --your compiler does not support \`-c' and \`-o' together. If you --repeat this compilation, it may succeed, by chance, but you had better --avoid parallel builds (make -j) in this platform, or get a better --compiler." - -- $run $rm $removelist -- exit 1 -- fi - -- # Just move the object if needed, then go on to compile the next one -- if test x"$output_obj" != x"$libobj"; then -- $show "$mv $output_obj $libobj" -- if $run $mv $output_obj $libobj; then : -- else -- error=$? -- $run $rm $removelist -- exit $error -- fi -- fi -+magic="%%%MAGIC variable%%%" -+magic_exe="%%%MAGIC EXE variable%%%" - -- # If we have no pic_flag, then copy the object into place and finish. -- if (test -z "$pic_flag" || test "$pic_mode" != default) && -- test "$build_old_libs" = yes; then -- # Rename the .lo from within objdir to obj -- if test -f $obj; then -- $show $rm $obj -- $run $rm $obj -- fi -+# Global variables. -+nonopt= -+preserve_args= -+lo2o="s/\\.lo\$/.${objext}/" -+o2lo="s/\\.${objext}\$/.lo/" -+extracted_archives= -+extracted_serial=0 - -- $show "$mv $libobj $obj" -- if $run $mv $libobj $obj; then : -- else -- error=$? -- $run $rm $removelist -- exit $error -- fi -+# If this variable is set in any of the actions, the command in it -+# will be execed at the end. This prevents here-documents from being -+# left over by shells. -+exec_cmd= - -- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` -- if test "X$xdir" = "X$obj"; then -- xdir="." -- else -- xdir="$xdir" -- fi -- baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"` -- libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` -- # Now arrange that obj and lo_libobj become the same file -- $show "(cd $xdir && $LN_S $baseobj $libobj)" -- if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then -- # Unlock the critical section if it was locked -- if test "$need_locks" != no; then -- $run $rm "$lockfile" -- fi -- exit 0 -- else -- error=$? -- $run $rm $removelist -- exit $error -- fi -- fi -+# func_append var value -+# Append VALUE to the end of shell variable VAR. -+func_append () -+{ -+ eval "${1}=\$${1}\${2}" -+} # func_append may be replaced by extended shell implementation -+ -+# func_append_quoted var value -+# Quote VALUE and append to the end of shell variable VAR, separated -+# by a space. -+func_append_quoted () -+{ -+ func_quote_for_eval "${2}" -+ eval "${1}=\$${1}\\ \$func_quote_for_eval_result" -+} # func_append_quoted may be replaced by extended shell implementation -+ -+ -+# func_arith arithmetic-term... -+func_arith () -+{ -+ func_arith_result=`expr "${@}"` -+} # func_arith may be replaced by extended shell implementation -+ -+ -+# func_len string -+# STRING may not start with a hyphen. -+func_len () -+{ -+ func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` -+} # func_len may be replaced by extended shell implementation -+ -+ -+# func_lo2o object -+func_lo2o () -+{ -+ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` -+} # func_lo2o may be replaced by extended shell implementation -+ -+ -+# func_xform libobj-or-source -+func_xform () -+{ -+ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` -+} # func_xform may be replaced by extended shell implementation -+ -+ -+# func_fatal_configuration arg... -+# Echo program name prefixed message to standard error, followed by -+# a configuration failure hint, and exit. -+func_fatal_configuration () -+{ -+ func_error ${1+"$@"} -+ func_error "See the $PACKAGE documentation for more information." -+ func_fatal_error "Fatal configuration error." -+} - -- # Allow error messages only from the first compilation. -- suppress_output=' >/dev/null 2>&1' -- fi - -- # Only build a position-dependent object if we build old libraries. -+# func_config -+# Display the configuration for all the tags in this script. -+func_config () -+{ -+ re_begincf='^# ### BEGIN LIBTOOL' -+ re_endcf='^# ### END LIBTOOL' -+ -+ # Default configuration. -+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" -+ -+ # Now print the configurations for the tags. -+ for tagname in $taglist; do -+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" -+ done -+ -+ exit $? -+} -+ -+# func_features -+# Display the features supported by this script. -+func_features () -+{ -+ echo "host: $host" -+ if test "$build_libtool_libs" = yes; then -+ echo "enable shared libraries" -+ else -+ echo "disable shared libraries" -+ fi - if test "$build_old_libs" = yes; then -- if test "$pic_mode" != yes; then -- # Don't build PIC code -- command="$base_compile $srcfile" -+ echo "enable static libraries" -+ else -+ echo "disable static libraries" -+ fi -+ -+ exit $? -+} -+ -+# func_enable_tag tagname -+# Verify that TAGNAME is valid, and either flag an error and exit, or -+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist -+# variable here. -+func_enable_tag () -+{ -+ # Global variable: -+ tagname="$1" -+ -+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" -+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" -+ sed_extractcf="/$re_begincf/,/$re_endcf/p" -+ -+ # Validate tagname. -+ case $tagname in -+ *[!-_A-Za-z0-9,/]*) -+ func_fatal_error "invalid tag name: $tagname" -+ ;; -+ esac -+ -+ # Don't test for the "default" C tag, as we know it's -+ # there but not specially marked. -+ case $tagname in -+ CC) ;; -+ *) -+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then -+ taglist="$taglist $tagname" -+ -+ # Evaluate the configuration. Be careful to quote the path -+ # and the sed script, to avoid splitting on whitespace, but -+ # also don't use non-portable quotes within backquotes within -+ # quotes we have to do it in 2 steps: -+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` -+ eval "$extractedcf" - else -- # All platforms use -DPIC, to notify preprocessed assembler code. -- command="$base_compile $srcfile $pic_flag -DPIC" -- fi -- if test "$compiler_c_o" = yes; then -- command="$command -o $obj" -- output_obj="$obj" -+ func_error "ignoring unknown tag $tagname" - fi -+ ;; -+ esac -+} - -- # Suppress compiler output if we already did a PIC compilation. -- command="$command$suppress_output" -- $run $rm "$output_obj" -- $show "$command" -- if $run eval "$command"; then : -+# func_check_version_match -+# Ensure that we are using m4 macros, and libtool script from the same -+# release of libtool. -+func_check_version_match () -+{ -+ if test "$package_revision" != "$macro_revision"; then -+ if test "$VERSION" != "$macro_version"; then -+ if test -z "$macro_version"; then -+ cat >&2 <<_LT_EOF -+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -+$progname: definition of this LT_INIT comes from an older release. -+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -+$progname: and run autoconf again. -+_LT_EOF - else -- $run $rm $removelist -- exit 1 -+ cat >&2 <<_LT_EOF -+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. -+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -+$progname: and run autoconf again. -+_LT_EOF - fi -+ else -+ cat >&2 <<_LT_EOF -+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, -+$progname: but the definition of this LT_INIT comes from revision $macro_revision. -+$progname: You should recreate aclocal.m4 with macros from revision $package_revision -+$progname: of $PACKAGE $VERSION and run autoconf again. -+_LT_EOF -+ fi - -- if test "$need_locks" = warn && -- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then -- echo "\ --*** ERROR, $lockfile contains: --`cat $lockfile 2>/dev/null` -+ exit $EXIT_MISMATCH -+ fi -+} - --but it should contain: --$srcfile - --This indicates that another process is trying to use the same --temporary object file, and libtool could not work around it because --your compiler does not support \`-c' and \`-o' together. If you --repeat this compilation, it may succeed, by chance, but you had better --avoid parallel builds (make -j) in this platform, or get a better --compiler." -+# Shorthand for --mode=foo, only valid as the first argument -+case $1 in -+clean|clea|cle|cl) -+ shift; set dummy --mode clean ${1+"$@"}; shift -+ ;; -+compile|compil|compi|comp|com|co|c) -+ shift; set dummy --mode compile ${1+"$@"}; shift -+ ;; -+execute|execut|execu|exec|exe|ex|e) -+ shift; set dummy --mode execute ${1+"$@"}; shift -+ ;; -+finish|finis|fini|fin|fi|f) -+ shift; set dummy --mode finish ${1+"$@"}; shift -+ ;; -+install|instal|insta|inst|ins|in|i) -+ shift; set dummy --mode install ${1+"$@"}; shift -+ ;; -+link|lin|li|l) -+ shift; set dummy --mode link ${1+"$@"}; shift -+ ;; -+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) -+ shift; set dummy --mode uninstall ${1+"$@"}; shift -+ ;; -+esac - -- $run $rm $removelist -- exit 1 -- fi - -- # Just move the object if needed -- if test x"$output_obj" != x"$obj"; then -- $show "$mv $output_obj $obj" -- if $run $mv $output_obj $obj; then : -- else -- error=$? -- $run $rm $removelist -- exit $error -- fi -- fi - -- # Create an invalid libtool object if no PIC, so that we do not -- # accidentally link it into a program. -- if test "$build_libtool_libs" != yes; then -- $show "echo timestamp > $libobj" -- $run eval "echo timestamp > \$libobj" || exit $? -- else -- # Move the .lo from within objdir -- $show "$mv $libobj $lo_libobj" -- if $run $mv $libobj $lo_libobj; then : -- else -- error=$? -- $run $rm $removelist -- exit $error -- fi -- fi -- fi -+# Option defaults: -+opt_debug=: -+opt_dry_run=false -+opt_config=false -+opt_preserve_dup_deps=false -+opt_features=false -+opt_finish=false -+opt_help=false -+opt_help_all=false -+opt_silent=: -+opt_verbose=: -+opt_silent=false -+opt_verbose=false -+ -+ -+# Parse options once, thoroughly. This comes as soon as possible in the -+# script to make things like `--version' happen as quickly as we can. -+{ -+ # this just eases exit handling -+ while test $# -gt 0; do -+ opt="$1" -+ shift -+ case $opt in -+ --debug|-x) opt_debug='set -x' -+ func_echo "enabling shell trace mode" -+ $opt_debug -+ ;; -+ --dry-run|--dryrun|-n) -+ opt_dry_run=: -+ ;; -+ --config) -+ opt_config=: -+func_config -+ ;; -+ --dlopen|-dlopen) -+ optarg="$1" -+ opt_dlopen="${opt_dlopen+$opt_dlopen -+}$optarg" -+ shift -+ ;; -+ --preserve-dup-deps) -+ opt_preserve_dup_deps=: -+ ;; -+ --features) -+ opt_features=: -+func_features -+ ;; -+ --finish) -+ opt_finish=: -+set dummy --mode finish ${1+"$@"}; shift -+ ;; -+ --help) -+ opt_help=: -+ ;; -+ --help-all) -+ opt_help_all=: -+opt_help=': help-all' -+ ;; -+ --mode) -+ test $# = 0 && func_missing_arg $opt && break -+ optarg="$1" -+ opt_mode="$optarg" -+case $optarg in -+ # Valid mode arguments: -+ clean|compile|execute|finish|install|link|relink|uninstall) ;; -+ -+ # Catch anything else as an error -+ *) func_error "invalid argument for $opt" -+ exit_cmd=exit -+ break -+ ;; -+esac -+ shift -+ ;; -+ --no-silent|--no-quiet) -+ opt_silent=false -+func_append preserve_args " $opt" -+ ;; -+ --no-verbose) -+ opt_verbose=false -+func_append preserve_args " $opt" -+ ;; -+ --silent|--quiet) -+ opt_silent=: -+func_append preserve_args " $opt" -+ opt_verbose=false -+ ;; -+ --verbose|-v) -+ opt_verbose=: -+func_append preserve_args " $opt" -+opt_silent=false -+ ;; -+ --tag) -+ test $# = 0 && func_missing_arg $opt && break -+ optarg="$1" -+ opt_tag="$optarg" -+func_append preserve_args " $opt $optarg" -+func_enable_tag "$optarg" -+ shift -+ ;; -+ -+ -\?|-h) func_usage ;; -+ --help) func_help ;; -+ --version) func_version ;; -+ -+ # Separate optargs to long options: -+ --*=*) -+ func_split_long_opt "$opt" -+ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} -+ shift -+ ;; -+ -+ # Separate non-argument short options: -+ -\?*|-h*|-n*|-v*) -+ func_split_short_opt "$opt" -+ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} -+ shift -+ ;; -+ -+ --) break ;; -+ -*) func_fatal_help "unrecognized option \`$opt'" ;; -+ *) set dummy "$opt" ${1+"$@"}; shift; break ;; -+ esac -+ done - -- # Unlock the critical section if it was locked -- if test "$need_locks" != no; then -- $run $rm "$lockfile" -- fi -+ # Validate options: - -- exit 0 -- ;; -+ # save first non-option argument -+ if test "$#" -gt 0; then -+ nonopt="$opt" -+ shift -+ fi - -- # libtool link mode -- link | relink) -- modename="$modename: link" -- case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) -- # It is impossible to link a dll without this setting, and -- # we shouldn't force the makefile maintainer to figure out -- # which system we are compiling for in order to pass an extra -- # flag for every libtool invokation. -- # allow_undefined=no -+ # preserve --debug -+ test "$opt_debug" = : || func_append preserve_args " --debug" - -- # FIXME: Unfortunately, there are problems with the above when trying -- # to make a dll which has undefined symbols, in which case not -- # even a static library is built. For now, we need to specify -- # -no-undefined on the libtool link line when we can be certain -- # that all symbols are satisfied, otherwise we get a static library. -- allow_undefined=yes -+ case $host in -+ *cygwin* | *mingw* | *pw32* | *cegcc*) -+ # don't eliminate duplications in $postdeps and $predeps -+ opt_duplicate_compiler_generated_deps=: - ;; - *) -- allow_undefined=yes -+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps - ;; -+ esac -+ -+ $opt_help || { -+ # Sanity checks first: -+ func_check_version_match -+ -+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then -+ func_fatal_configuration "not configured to build any kind of library" -+ fi -+ -+ # Darwin sucks -+ eval std_shrext=\"$shrext_cmds\" -+ -+ # Only execute mode is allowed to have -dlopen flags. -+ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then -+ func_error "unrecognized option \`-dlopen'" -+ $ECHO "$help" 1>&2 -+ exit $EXIT_FAILURE -+ fi -+ -+ # Change the help message to a mode-specific one. -+ generic_help="$help" -+ help="Try \`$progname --help --mode=$opt_mode' for more information." -+ } -+ -+ -+ # Bail if the options were screwed -+ $exit_cmd $EXIT_FAILURE -+} -+ -+ -+ -+ -+## ----------- ## -+## Main. ## -+## ----------- ## -+ -+# func_lalib_p file -+# True iff FILE is a libtool `.la' library or `.lo' object file. -+# This function is only a basic sanity check; it will hardly flush out -+# determined imposters. -+func_lalib_p () -+{ -+ test -f "$1" && -+ $SED -e 4q "$1" 2>/dev/null \ -+ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 -+} -+ -+# func_lalib_unsafe_p file -+# True iff FILE is a libtool `.la' library or `.lo' object file. -+# This function implements the same check as func_lalib_p without -+# resorting to external programs. To this end, it redirects stdin and -+# closes it afterwards, without saving the original file descriptor. -+# As a safety measure, use it only where a negative result would be -+# fatal anyway. Works if `file' does not exist. -+func_lalib_unsafe_p () -+{ -+ lalib_p=no -+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then -+ for lalib_p_l in 1 2 3 4 -+ do -+ read lalib_p_line -+ case "$lalib_p_line" in -+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; -+ esac -+ done -+ exec 0<&5 5<&- -+ fi -+ test "$lalib_p" = yes -+} -+ -+# func_ltwrapper_script_p file -+# True iff FILE is a libtool wrapper script -+# This function is only a basic sanity check; it will hardly flush out -+# determined imposters. -+func_ltwrapper_script_p () -+{ -+ func_lalib_p "$1" -+} -+ -+# func_ltwrapper_executable_p file -+# True iff FILE is a libtool wrapper executable -+# This function is only a basic sanity check; it will hardly flush out -+# determined imposters. -+func_ltwrapper_executable_p () -+{ -+ func_ltwrapper_exec_suffix= -+ case $1 in -+ *.exe) ;; -+ *) func_ltwrapper_exec_suffix=.exe ;; - esac -- libtool_args="$nonopt" -- compile_command="$nonopt" -- finalize_command="$nonopt" -+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 -+} - -- compile_rpath= -- finalize_rpath= -- compile_shlibpath= -- finalize_shlibpath= -- convenience= -- old_convenience= -- deplibs= -- old_deplibs= -- compiler_flags= -- linker_flags= -- dllsearchpath= -- lib_search_path=`pwd` -+# func_ltwrapper_scriptname file -+# Assumes file is an ltwrapper_executable -+# uses $file to determine the appropriate filename for a -+# temporary ltwrapper_script. -+func_ltwrapper_scriptname () -+{ -+ func_dirname_and_basename "$1" "" "." -+ func_stripname '' '.exe' "$func_basename_result" -+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" -+} - -- avoid_version=no -- dlfiles= -- dlprefiles= -- dlself=no -- export_dynamic=no -- export_symbols= -- export_symbols_regex= -- generated= -- libobjs= -- ltlibs= -- module=no -- no_install=no -- objs= -- prefer_static_libs=no -- preload=no -- prev= -- prevarg= -- release= -- rpath= -- xrpath= -- perm_rpath= -- temp_rpath= -- thread_safe=no -- vinfo= -+# func_ltwrapper_p file -+# True iff FILE is a libtool wrapper script or wrapper executable -+# This function is only a basic sanity check; it will hardly flush out -+# determined imposters. -+func_ltwrapper_p () -+{ -+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" -+} - -- # We need to know -static, to get the right output filenames. -- for arg -- do -- case $arg in -- -all-static | -static) -- if test "X$arg" = "X-all-static"; then -- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then -- $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 -- fi -- if test -n "$link_static_flag"; then -- dlopen_self=$dlopen_self_static -- fi -- else -- if test -z "$pic_flag" && test -n "$link_static_flag"; then -- dlopen_self=$dlopen_self_static -- fi -- fi -- build_libtool_libs=no -- build_old_libs=yes -- prefer_static_libs=yes -- break -- ;; -- esac -+ -+# func_execute_cmds commands fail_cmd -+# Execute tilde-delimited COMMANDS. -+# If FAIL_CMD is given, eval that upon failure. -+# FAIL_CMD may read-access the current command in variable CMD! -+func_execute_cmds () -+{ -+ $opt_debug -+ save_ifs=$IFS; IFS='~' -+ for cmd in $1; do -+ IFS=$save_ifs -+ eval cmd=\"$cmd\" -+ func_show_eval "$cmd" "${2-:}" - done -+ IFS=$save_ifs -+} - -- # See if our shared archives depend on static archives. -- test -n "$old_archive_from_new_cmds" && build_old_libs=yes - -- # Go through the arguments, transforming them on the way. -- while test $# -gt 0; do -- arg="$1" -- shift -- case $arg in -- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test -- ;; -- *) qarg=$arg ;; -- esac -- libtool_args="$libtool_args $qarg" -+# func_source file -+# Source FILE, adding directory component if necessary. -+# Note that it is not necessary on cygwin/mingw to append a dot to -+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe -+# behavior happens only for exec(3), not for open(2)! Also, sourcing -+# `FILE.' does not work on cygwin managed mounts. -+func_source () -+{ -+ $opt_debug -+ case $1 in -+ */* | *\\*) . "$1" ;; -+ *) . "./$1" ;; -+ esac -+} - -- # If the previous option needs an argument, assign it. -- if test -n "$prev"; then -- case $prev in -- output) -- compile_command="$compile_command @OUTPUT@" -- finalize_command="$finalize_command @OUTPUT@" -- ;; -- esac - -- case $prev in -- dlfiles|dlprefiles) -- if test "$preload" = no; then -- # Add the symbol object into the linking commands. -- compile_command="$compile_command @SYMFILE@" -- finalize_command="$finalize_command @SYMFILE@" -- preload=yes -- fi -- case $arg in -- *.la | *.lo) ;; # We handle these cases below. -- force) -- if test "$dlself" = no; then -- dlself=needless -- export_dynamic=yes -- fi -- prev= -- continue -- ;; -- self) -- if test "$prev" = dlprefiles; then -- dlself=yes -- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then -- dlself=yes -- else -- dlself=needless -- export_dynamic=yes -- fi -- prev= -- continue -- ;; -- *) -- if test "$prev" = dlfiles; then -- dlfiles="$dlfiles $arg" -- else -- dlprefiles="$dlprefiles $arg" -- fi -- prev= -- continue -- ;; -- esac -- ;; -- expsyms) -- export_symbols="$arg" -- if test ! -f "$arg"; then -- $echo "$modename: symbol file \`$arg' does not exist" -- exit 1 -- fi -- prev= -- continue -- ;; -- expsyms_regex) -- export_symbols_regex="$arg" -- prev= -- continue -- ;; -- release) -- release="-$arg" -- prev= -- continue -- ;; -- rpath | xrpath) -- # We need an absolute path. -- case $arg in -- [\\/]* | [A-Za-z]:[\\/]*) ;; -- *) -- $echo "$modename: only absolute run-paths are allowed" 1>&2 -- exit 1 -- ;; -- esac -- if test "$prev" = rpath; then -- case "$rpath " in -- *" $arg "*) ;; -- *) rpath="$rpath $arg" ;; -- esac -- else -- case "$xrpath " in -- *" $arg "*) ;; -- *) xrpath="$xrpath $arg" ;; -- esac -- fi -- prev= -- continue -- ;; -- xcompiler) -- compiler_flags="$compiler_flags $qarg" -- prev= -- compile_command="$compile_command $qarg" -- finalize_command="$finalize_command $qarg" -- continue -- ;; -- xlinker) -- linker_flags="$linker_flags $qarg" -- compiler_flags="$compiler_flags $wl$qarg" -- prev= -- compile_command="$compile_command $wl$qarg" -- finalize_command="$finalize_command $wl$qarg" -- continue -- ;; -- *) -- eval "$prev=\"\$arg\"" -- prev= -- continue -- ;; -- esac -- fi # test -n $prev -+# func_resolve_sysroot PATH -+# Replace a leading = in PATH with a sysroot. Store the result into -+# func_resolve_sysroot_result -+func_resolve_sysroot () -+{ -+ func_resolve_sysroot_result=$1 -+ case $func_resolve_sysroot_result in -+ =*) -+ func_stripname '=' '' "$func_resolve_sysroot_result" -+ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result -+ ;; -+ esac -+} - -- prevarg="$arg" -+# func_replace_sysroot PATH -+# If PATH begins with the sysroot, replace it with = and -+# store the result into func_replace_sysroot_result. -+func_replace_sysroot () -+{ -+ case "$lt_sysroot:$1" in -+ ?*:"$lt_sysroot"*) -+ func_stripname "$lt_sysroot" '' "$1" -+ func_replace_sysroot_result="=$func_stripname_result" -+ ;; -+ *) -+ # Including no sysroot. -+ func_replace_sysroot_result=$1 -+ ;; -+ esac -+} - -- case $arg in -- -all-static) -- if test -n "$link_static_flag"; then -- compile_command="$compile_command $link_static_flag" -- finalize_command="$finalize_command $link_static_flag" -+# func_infer_tag arg -+# Infer tagged configuration to use if any are available and -+# if one wasn't chosen via the "--tag" command line option. -+# Only attempt this if the compiler in the base compile -+# command doesn't match the default compiler. -+# arg is usually of the form 'gcc ...' -+func_infer_tag () -+{ -+ $opt_debug -+ if test -n "$available_tags" && test -z "$tagname"; then -+ CC_quoted= -+ for arg in $CC; do -+ func_append_quoted CC_quoted "$arg" -+ done -+ CC_expanded=`func_echo_all $CC` -+ CC_quoted_expanded=`func_echo_all $CC_quoted` -+ case $@ in -+ # Blanks in the command may have been stripped by the calling shell, -+ # but not from the CC environment variable when configure was run. -+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ -+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; -+ # Blanks at the start of $base_compile will cause this to fail -+ # if we don't check for them as well. -+ *) -+ for z in $available_tags; do -+ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then -+ # Evaluate the configuration. -+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" -+ CC_quoted= -+ for arg in $CC; do -+ # Double-quote args containing other shell metacharacters. -+ func_append_quoted CC_quoted "$arg" -+ done -+ CC_expanded=`func_echo_all $CC` -+ CC_quoted_expanded=`func_echo_all $CC_quoted` -+ case "$@ " in -+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ -+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) -+ # The compiler in the base compile command matches -+ # the one in the tagged configuration. -+ # Assume this is the tagged configuration we want. -+ tagname=$z -+ break -+ ;; -+ esac -+ fi -+ done -+ # If $tagname still isn't set, then no tagged configuration -+ # was found and let the user know that the "--tag" command -+ # line option must be used. -+ if test -z "$tagname"; then -+ func_echo "unable to infer tagged configuration" -+ func_fatal_error "specify a tag with \`--tag'" -+# else -+# func_verbose "using $tagname tagged configuration" - fi -- continue - ;; -+ esac -+ fi -+} - -- -allow-undefined) -- # FIXME: remove this flag sometime in the future. -- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 -- continue -- ;; - -- -avoid-version) -- avoid_version=yes -- continue -- ;; - -- -dlopen) -- prev=dlfiles -- continue -- ;; -+# func_write_libtool_object output_name pic_name nonpic_name -+# Create a libtool object file (analogous to a ".la" file), -+# but don't create it if we're doing a dry run. -+func_write_libtool_object () -+{ -+ write_libobj=${1} -+ if test "$build_libtool_libs" = yes; then -+ write_lobj=\'${2}\' -+ else -+ write_lobj=none -+ fi - -- -dlpreopen) -- prev=dlprefiles -- continue -- ;; -+ if test "$build_old_libs" = yes; then -+ write_oldobj=\'${3}\' -+ else -+ write_oldobj=none -+ fi - -- -export-dynamic) -- export_dynamic=yes -- continue -- ;; -+ $opt_dry_run || { -+ cat >${write_libobj}T <<EOF -+# $write_libobj - a libtool object file -+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -+# -+# Please DO NOT delete this file! -+# It is necessary for linking the library. - -- -export-symbols | -export-symbols-regex) -- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then -- $echo "$modename: more than one -exported-symbols argument is not allowed" -- exit 1 -- fi -- if test "X$arg" = "X-export-symbols"; then -- prev=expsyms -- else -- prev=expsyms_regex -- fi -- continue -- ;; -+# Name of the PIC object. -+pic_object=$write_lobj - -- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* -- # so, if we see these flags be careful not to treat them like -L -- -L[A-Z][A-Z]*:*) -- case $with_gcc/$host in -- no/*-*-irix*) -- compile_command="$compile_command $arg" -- finalize_command="$finalize_command $arg" -- ;; -- esac -- continue -- ;; -+# Name of the non-PIC object -+non_pic_object=$write_oldobj - -- -L*) -- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` -- # We need an absolute path. -- case $dir in -- [\\/]* | [A-Za-z]:[\\/]*) ;; -- *) -- absdir=`cd "$dir" && pwd` -- if test -z "$absdir"; then -- $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 -- exit 1 -- fi -- dir="$absdir" -- ;; -- esac -- case "$deplibs " in -- *" -L$dir "*) ;; -- *) -- deplibs="$deplibs -L$dir" -- lib_search_path="$lib_search_path $dir" -- ;; -- esac -- case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) -- case :$dllsearchpath: in -- *":$dir:"*) ;; -- *) dllsearchpath="$dllsearchpath:$dir";; -- esac -- ;; -- esac -- continue -- ;; -+EOF -+ $MV "${write_libobj}T" "${write_libobj}" -+ } -+} - -- -l*) -- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then -- case $host in -- *-*-cygwin* | *-*-pw32* | *-*-beos*) -- # These systems don't actually have a C or math library (as such) -- continue -- ;; -- *-*-mingw* | *-*-os2*) -- # These systems don't actually have a C library (as such) -- test "X$arg" = "X-lc" && continue -- ;; -- *-*-openbsd*) -- # Do not include libc due to us having libc/libc_r. -- test "X$arg" = "X-lc" && continue -- ;; -- esac -- elif test "X$arg" = "X-lc_r"; then -- case $host in -- *-*-openbsd*) -- # Do not include libc_r directly, use -pthread flag. -- continue -- ;; -- esac -- fi -- deplibs="$deplibs $arg" -- continue -- ;; - -- -module) -- module=yes -- continue -- ;; -+################################################## -+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS # -+################################################## -+ -+# func_convert_core_file_wine_to_w32 ARG -+# Helper function used by file name conversion functions when $build is *nix, -+# and $host is mingw, cygwin, or some other w32 environment. Relies on a -+# correctly configured wine environment available, with the winepath program -+# in $build's $PATH. -+# -+# ARG is the $build file name to be converted to w32 format. -+# Result is available in $func_convert_core_file_wine_to_w32_result, and will -+# be empty on error (or when ARG is empty) -+func_convert_core_file_wine_to_w32 () -+{ -+ $opt_debug -+ func_convert_core_file_wine_to_w32_result="$1" -+ if test -n "$1"; then -+ # Unfortunately, winepath does not exit with a non-zero error code, so we -+ # are forced to check the contents of stdout. On the other hand, if the -+ # command is not found, the shell will set an exit code of 127 and print -+ # *an error message* to stdout. So we must check for both error code of -+ # zero AND non-empty stdout, which explains the odd construction: -+ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null` -+ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then -+ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | -+ $SED -e "$lt_sed_naive_backslashify"` -+ else -+ func_convert_core_file_wine_to_w32_result= -+ fi -+ fi -+} -+# end: func_convert_core_file_wine_to_w32 - -- -no-fast-install) -- fast_install=no -- continue -- ;; - -- -no-install) -- case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) -- # The PATH hackery in wrapper scripts is required on Windows -- # in order for the loader to find any dlls it needs. -- $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 -- $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 -- fast_install=no -- ;; -- *) no_install=yes ;; -- esac -- continue -- ;; -+# func_convert_core_path_wine_to_w32 ARG -+# Helper function used by path conversion functions when $build is *nix, and -+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly -+# configured wine environment available, with the winepath program in $build's -+# $PATH. Assumes ARG has no leading or trailing path separator characters. -+# -+# ARG is path to be converted from $build format to win32. -+# Result is available in $func_convert_core_path_wine_to_w32_result. -+# Unconvertible file (directory) names in ARG are skipped; if no directory names -+# are convertible, then the result may be empty. -+func_convert_core_path_wine_to_w32 () -+{ -+ $opt_debug -+ # unfortunately, winepath doesn't convert paths, only file names -+ func_convert_core_path_wine_to_w32_result="" -+ if test -n "$1"; then -+ oldIFS=$IFS -+ IFS=: -+ for func_convert_core_path_wine_to_w32_f in $1; do -+ IFS=$oldIFS -+ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" -+ if test -n "$func_convert_core_file_wine_to_w32_result" ; then -+ if test -z "$func_convert_core_path_wine_to_w32_result"; then -+ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" -+ else -+ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" -+ fi -+ fi -+ done -+ IFS=$oldIFS -+ fi -+} -+# end: func_convert_core_path_wine_to_w32 - -- -no-undefined) -- allow_undefined=no -- continue -- ;; - -- -o) prev=output ;; -+# func_cygpath ARGS... -+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when -+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) -+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or -+# (2), returns the Cygwin file name or path in func_cygpath_result (input -+# file name or path is assumed to be in w32 format, as previously converted -+# from $build's *nix or MSYS format). In case (3), returns the w32 file name -+# or path in func_cygpath_result (input file name or path is assumed to be in -+# Cygwin format). Returns an empty string on error. -+# -+# ARGS are passed to cygpath, with the last one being the file name or path to -+# be converted. -+# -+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH -+# environment variable; do not put it in $PATH. -+func_cygpath () -+{ -+ $opt_debug -+ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then -+ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` -+ if test "$?" -ne 0; then -+ # on failure, ensure result is empty -+ func_cygpath_result= -+ fi -+ else -+ func_cygpath_result= -+ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" -+ fi -+} -+#end: func_cygpath - -- -release) -- prev=release -- continue -- ;; - -- -rpath) -- prev=rpath -- continue -- ;; -+# func_convert_core_msys_to_w32 ARG -+# Convert file name or path ARG from MSYS format to w32 format. Return -+# result in func_convert_core_msys_to_w32_result. -+func_convert_core_msys_to_w32 () -+{ -+ $opt_debug -+ # awkward: cmd appends spaces to result -+ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | -+ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` -+} -+#end: func_convert_core_msys_to_w32 - -- -R) -- prev=xrpath -- continue -- ;; - -- -R*) -- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` -- # We need an absolute path. -- case $dir in -- [\\/]* | [A-Za-z]:[\\/]*) ;; -- *) -- $echo "$modename: only absolute run-paths are allowed" 1>&2 -- exit 1 -- ;; -- esac -- case "$xrpath " in -- *" $dir "*) ;; -- *) xrpath="$xrpath $dir" ;; -- esac -- continue -- ;; -+# func_convert_file_check ARG1 ARG2 -+# Verify that ARG1 (a file name in $build format) was converted to $host -+# format in ARG2. Otherwise, emit an error message, but continue (resetting -+# func_to_host_file_result to ARG1). -+func_convert_file_check () -+{ -+ $opt_debug -+ if test -z "$2" && test -n "$1" ; then -+ func_error "Could not determine host file name corresponding to" -+ func_error " \`$1'" -+ func_error "Continuing, but uninstalled executables may not work." -+ # Fallback: -+ func_to_host_file_result="$1" -+ fi -+} -+# end func_convert_file_check - -- -static) -- # The effects of -static are defined in a previous loop. -- # We used to do the same as -all-static on platforms that -- # didn't have a PIC flag, but the assumption that the effects -- # would be equivalent was wrong. It would break on at least -- # Digital Unix and AIX. -- continue -- ;; - -- -thread-safe) -- thread_safe=yes -- continue -- ;; -+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH -+# Verify that FROM_PATH (a path in $build format) was converted to $host -+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting -+# func_to_host_file_result to a simplistic fallback value (see below). -+func_convert_path_check () -+{ -+ $opt_debug -+ if test -z "$4" && test -n "$3"; then -+ func_error "Could not determine the host path corresponding to" -+ func_error " \`$3'" -+ func_error "Continuing, but uninstalled executables may not work." -+ # Fallback. This is a deliberately simplistic "conversion" and -+ # should not be "improved". See libtool.info. -+ if test "x$1" != "x$2"; then -+ lt_replace_pathsep_chars="s|$1|$2|g" -+ func_to_host_path_result=`echo "$3" | -+ $SED -e "$lt_replace_pathsep_chars"` -+ else -+ func_to_host_path_result="$3" -+ fi -+ fi -+} -+# end func_convert_path_check - -- -version-info) -- prev=vinfo -- continue -- ;; - -- -Wc,*) -- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` -- arg= -- save_ifs="$IFS"; IFS=',' -- for flag in $args; do -- IFS="$save_ifs" -- case $flag in -- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- flag="\"$flag\"" -- ;; -- esac -- arg="$arg $wl$flag" -- compiler_flags="$compiler_flags $flag" -- done -- IFS="$save_ifs" -- arg=`$echo "X$arg" | $Xsed -e "s/^ //"` -- ;; -+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG -+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT -+# and appending REPL if ORIG matches BACKPAT. -+func_convert_path_front_back_pathsep () -+{ -+ $opt_debug -+ case $4 in -+ $1 ) func_to_host_path_result="$3$func_to_host_path_result" -+ ;; -+ esac -+ case $4 in -+ $2 ) func_append func_to_host_path_result "$3" -+ ;; -+ esac -+} -+# end func_convert_path_front_back_pathsep - -- -Wl,*) -- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` -- arg= -- save_ifs="$IFS"; IFS=',' -- for flag in $args; do -- IFS="$save_ifs" -- case $flag in -- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- flag="\"$flag\"" -- ;; -- esac -- arg="$arg $wl$flag" -- compiler_flags="$compiler_flags $wl$flag" -- linker_flags="$linker_flags $flag" -- done -- IFS="$save_ifs" -- arg=`$echo "X$arg" | $Xsed -e "s/^ //"` -- ;; - -- -Xcompiler) -- prev=xcompiler -- continue -+################################################## -+# $build to $host FILE NAME CONVERSION FUNCTIONS # -+################################################## -+# invoked via `$to_host_file_cmd ARG' -+# -+# In each case, ARG is the path to be converted from $build to $host format. -+# Result will be available in $func_to_host_file_result. -+ -+ -+# func_to_host_file ARG -+# Converts the file name ARG from $build format to $host format. Return result -+# in func_to_host_file_result. -+func_to_host_file () -+{ -+ $opt_debug -+ $to_host_file_cmd "$1" -+} -+# end func_to_host_file -+ -+ -+# func_to_tool_file ARG LAZY -+# converts the file name ARG from $build format to toolchain format. Return -+# result in func_to_tool_file_result. If the conversion in use is listed -+# in (the comma separated) LAZY, no conversion takes place. -+func_to_tool_file () -+{ -+ $opt_debug -+ case ,$2, in -+ *,"$to_tool_file_cmd",*) -+ func_to_tool_file_result=$1 -+ ;; -+ *) -+ $to_tool_file_cmd "$1" -+ func_to_tool_file_result=$func_to_host_file_result -+ ;; -+ esac -+} -+# end func_to_tool_file -+ -+ -+# func_convert_file_noop ARG -+# Copy ARG to func_to_host_file_result. -+func_convert_file_noop () -+{ -+ func_to_host_file_result="$1" -+} -+# end func_convert_file_noop -+ -+ -+# func_convert_file_msys_to_w32 ARG -+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic -+# conversion to w32 is not available inside the cwrapper. Returns result in -+# func_to_host_file_result. -+func_convert_file_msys_to_w32 () -+{ -+ $opt_debug -+ func_to_host_file_result="$1" -+ if test -n "$1"; then -+ func_convert_core_msys_to_w32 "$1" -+ func_to_host_file_result="$func_convert_core_msys_to_w32_result" -+ fi -+ func_convert_file_check "$1" "$func_to_host_file_result" -+} -+# end func_convert_file_msys_to_w32 -+ -+ -+# func_convert_file_cygwin_to_w32 ARG -+# Convert file name ARG from Cygwin to w32 format. Returns result in -+# func_to_host_file_result. -+func_convert_file_cygwin_to_w32 () -+{ -+ $opt_debug -+ func_to_host_file_result="$1" -+ if test -n "$1"; then -+ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use -+ # LT_CYGPATH in this case. -+ func_to_host_file_result=`cygpath -m "$1"` -+ fi -+ func_convert_file_check "$1" "$func_to_host_file_result" -+} -+# end func_convert_file_cygwin_to_w32 -+ -+ -+# func_convert_file_nix_to_w32 ARG -+# Convert file name ARG from *nix to w32 format. Requires a wine environment -+# and a working winepath. Returns result in func_to_host_file_result. -+func_convert_file_nix_to_w32 () -+{ -+ $opt_debug -+ func_to_host_file_result="$1" -+ if test -n "$1"; then -+ func_convert_core_file_wine_to_w32 "$1" -+ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" -+ fi -+ func_convert_file_check "$1" "$func_to_host_file_result" -+} -+# end func_convert_file_nix_to_w32 -+ -+ -+# func_convert_file_msys_to_cygwin ARG -+# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -+# Returns result in func_to_host_file_result. -+func_convert_file_msys_to_cygwin () -+{ -+ $opt_debug -+ func_to_host_file_result="$1" -+ if test -n "$1"; then -+ func_convert_core_msys_to_w32 "$1" -+ func_cygpath -u "$func_convert_core_msys_to_w32_result" -+ func_to_host_file_result="$func_cygpath_result" -+ fi -+ func_convert_file_check "$1" "$func_to_host_file_result" -+} -+# end func_convert_file_msys_to_cygwin -+ -+ -+# func_convert_file_nix_to_cygwin ARG -+# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed -+# in a wine environment, working winepath, and LT_CYGPATH set. Returns result -+# in func_to_host_file_result. -+func_convert_file_nix_to_cygwin () -+{ -+ $opt_debug -+ func_to_host_file_result="$1" -+ if test -n "$1"; then -+ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. -+ func_convert_core_file_wine_to_w32 "$1" -+ func_cygpath -u "$func_convert_core_file_wine_to_w32_result" -+ func_to_host_file_result="$func_cygpath_result" -+ fi -+ func_convert_file_check "$1" "$func_to_host_file_result" -+} -+# end func_convert_file_nix_to_cygwin -+ -+ -+############################################# -+# $build to $host PATH CONVERSION FUNCTIONS # -+############################################# -+# invoked via `$to_host_path_cmd ARG' -+# -+# In each case, ARG is the path to be converted from $build to $host format. -+# The result will be available in $func_to_host_path_result. -+# -+# Path separators are also converted from $build format to $host format. If -+# ARG begins or ends with a path separator character, it is preserved (but -+# converted to $host format) on output. -+# -+# All path conversion functions are named using the following convention: -+# file name conversion function : func_convert_file_X_to_Y () -+# path conversion function : func_convert_path_X_to_Y () -+# where, for any given $build/$host combination the 'X_to_Y' value is the -+# same. If conversion functions are added for new $build/$host combinations, -+# the two new functions must follow this pattern, or func_init_to_host_path_cmd -+# will break. -+ -+ -+# func_init_to_host_path_cmd -+# Ensures that function "pointer" variable $to_host_path_cmd is set to the -+# appropriate value, based on the value of $to_host_file_cmd. -+to_host_path_cmd= -+func_init_to_host_path_cmd () -+{ -+ $opt_debug -+ if test -z "$to_host_path_cmd"; then -+ func_stripname 'func_convert_file_' '' "$to_host_file_cmd" -+ to_host_path_cmd="func_convert_path_${func_stripname_result}" -+ fi -+} -+ -+ -+# func_to_host_path ARG -+# Converts the path ARG from $build format to $host format. Return result -+# in func_to_host_path_result. -+func_to_host_path () -+{ -+ $opt_debug -+ func_init_to_host_path_cmd -+ $to_host_path_cmd "$1" -+} -+# end func_to_host_path -+ -+ -+# func_convert_path_noop ARG -+# Copy ARG to func_to_host_path_result. -+func_convert_path_noop () -+{ -+ func_to_host_path_result="$1" -+} -+# end func_convert_path_noop -+ -+ -+# func_convert_path_msys_to_w32 ARG -+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic -+# conversion to w32 is not available inside the cwrapper. Returns result in -+# func_to_host_path_result. -+func_convert_path_msys_to_w32 () -+{ -+ $opt_debug -+ func_to_host_path_result="$1" -+ if test -n "$1"; then -+ # Remove leading and trailing path separator characters from ARG. MSYS -+ # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; -+ # and winepath ignores them completely. -+ func_stripname : : "$1" -+ func_to_host_path_tmp1=$func_stripname_result -+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" -+ func_to_host_path_result="$func_convert_core_msys_to_w32_result" -+ func_convert_path_check : ";" \ -+ "$func_to_host_path_tmp1" "$func_to_host_path_result" -+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" -+ fi -+} -+# end func_convert_path_msys_to_w32 -+ -+ -+# func_convert_path_cygwin_to_w32 ARG -+# Convert path ARG from Cygwin to w32 format. Returns result in -+# func_to_host_file_result. -+func_convert_path_cygwin_to_w32 () -+{ -+ $opt_debug -+ func_to_host_path_result="$1" -+ if test -n "$1"; then -+ # See func_convert_path_msys_to_w32: -+ func_stripname : : "$1" -+ func_to_host_path_tmp1=$func_stripname_result -+ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` -+ func_convert_path_check : ";" \ -+ "$func_to_host_path_tmp1" "$func_to_host_path_result" -+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" -+ fi -+} -+# end func_convert_path_cygwin_to_w32 -+ -+ -+# func_convert_path_nix_to_w32 ARG -+# Convert path ARG from *nix to w32 format. Requires a wine environment and -+# a working winepath. Returns result in func_to_host_file_result. -+func_convert_path_nix_to_w32 () -+{ -+ $opt_debug -+ func_to_host_path_result="$1" -+ if test -n "$1"; then -+ # See func_convert_path_msys_to_w32: -+ func_stripname : : "$1" -+ func_to_host_path_tmp1=$func_stripname_result -+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" -+ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" -+ func_convert_path_check : ";" \ -+ "$func_to_host_path_tmp1" "$func_to_host_path_result" -+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" -+ fi -+} -+# end func_convert_path_nix_to_w32 -+ -+ -+# func_convert_path_msys_to_cygwin ARG -+# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -+# Returns result in func_to_host_file_result. -+func_convert_path_msys_to_cygwin () -+{ -+ $opt_debug -+ func_to_host_path_result="$1" -+ if test -n "$1"; then -+ # See func_convert_path_msys_to_w32: -+ func_stripname : : "$1" -+ func_to_host_path_tmp1=$func_stripname_result -+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" -+ func_cygpath -u -p "$func_convert_core_msys_to_w32_result" -+ func_to_host_path_result="$func_cygpath_result" -+ func_convert_path_check : : \ -+ "$func_to_host_path_tmp1" "$func_to_host_path_result" -+ func_convert_path_front_back_pathsep ":*" "*:" : "$1" -+ fi -+} -+# end func_convert_path_msys_to_cygwin -+ -+ -+# func_convert_path_nix_to_cygwin ARG -+# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a -+# a wine environment, working winepath, and LT_CYGPATH set. Returns result in -+# func_to_host_file_result. -+func_convert_path_nix_to_cygwin () -+{ -+ $opt_debug -+ func_to_host_path_result="$1" -+ if test -n "$1"; then -+ # Remove leading and trailing path separator characters from -+ # ARG. msys behavior is inconsistent here, cygpath turns them -+ # into '.;' and ';.', and winepath ignores them completely. -+ func_stripname : : "$1" -+ func_to_host_path_tmp1=$func_stripname_result -+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" -+ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" -+ func_to_host_path_result="$func_cygpath_result" -+ func_convert_path_check : : \ -+ "$func_to_host_path_tmp1" "$func_to_host_path_result" -+ func_convert_path_front_back_pathsep ":*" "*:" : "$1" -+ fi -+} -+# end func_convert_path_nix_to_cygwin -+ -+ -+# func_mode_compile arg... -+func_mode_compile () -+{ -+ $opt_debug -+ # Get the compilation command and the source file. -+ base_compile= -+ srcfile="$nonopt" # always keep a non-empty value in "srcfile" -+ suppress_opt=yes -+ suppress_output= -+ arg_mode=normal -+ libobj= -+ later= -+ pie_flag= -+ -+ for arg -+ do -+ case $arg_mode in -+ arg ) -+ # do not "continue". Instead, add this to base_compile -+ lastarg="$arg" -+ arg_mode=normal - ;; - -- -Xlinker) -- prev=xlinker -+ target ) -+ libobj="$arg" -+ arg_mode=normal - continue - ;; - -- # Some other compiler flag. -- -* | +*) -- # Unknown arguments in both finalize_command and compile_command need -- # to be aesthetically quoted because they are evaled later. -- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` -+ normal ) -+ # Accept any command-line options. - case $arg in -- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- arg="\"$arg\"" -+ -o) -+ test -n "$libobj" && \ -+ func_fatal_error "you cannot specify \`-o' more than once" -+ arg_mode=target -+ continue - ;; -- esac -- ;; - -- *.lo | *.$objext) -- # A library or standard object. -- if test "$prev" = dlfiles; then -- # This file was specified with -dlopen. -- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then -- dlfiles="$dlfiles $arg" -- prev= -- continue -- else -- # If libtool objects are unsupported, then we need to preload. -- prev=dlprefiles -- fi -- fi -+ -pie | -fpie | -fPIE) -+ func_append pie_flag " $arg" -+ continue -+ ;; - -- if test "$prev" = dlprefiles; then -- # Preload the old-style object. -- dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` -- prev= -- else -- case $arg in -- *.lo) libobjs="$libobjs $arg" ;; -- *) objs="$objs $arg" ;; -- esac -- fi -+ -shared | -static | -prefer-pic | -prefer-non-pic) -+ func_append later " $arg" -+ continue -+ ;; -+ -+ -no-suppress) -+ suppress_opt=no -+ continue -+ ;; -+ -+ -Xcompiler) -+ arg_mode=arg # the next one goes into the "base_compile" arg list -+ continue # The current "srcfile" will either be retained or -+ ;; # replaced later. I would guess that would be a bug. -+ -+ -Wc,*) -+ func_stripname '-Wc,' '' "$arg" -+ args=$func_stripname_result -+ lastarg= -+ save_ifs="$IFS"; IFS=',' -+ for arg in $args; do -+ IFS="$save_ifs" -+ func_append_quoted lastarg "$arg" -+ done -+ IFS="$save_ifs" -+ func_stripname ' ' '' "$lastarg" -+ lastarg=$func_stripname_result -+ -+ # Add the arguments to base_compile. -+ func_append base_compile " $lastarg" -+ continue -+ ;; -+ -+ *) -+ # Accept the current argument as the source file. -+ # The previous "srcfile" becomes the current argument. -+ # -+ lastarg="$srcfile" -+ srcfile="$arg" -+ ;; -+ esac # case $arg - ;; -+ esac # case $arg_mode - -- *.$libext) -- # An archive. -- deplibs="$deplibs $arg" -- old_deplibs="$old_deplibs $arg" -+ # Aesthetically quote the previous argument. -+ func_append_quoted base_compile "$lastarg" -+ done # for arg -+ -+ case $arg_mode in -+ arg) -+ func_fatal_error "you must specify an argument for -Xcompile" -+ ;; -+ target) -+ func_fatal_error "you must specify a target with \`-o'" -+ ;; -+ *) -+ # Get the name of the library object. -+ test -z "$libobj" && { -+ func_basename "$srcfile" -+ libobj="$func_basename_result" -+ } -+ ;; -+ esac -+ -+ # Recognize several different file suffixes. -+ # If the user specifies -o file.o, it is replaced with file.lo -+ case $libobj in -+ *.[cCFSifmso] | \ -+ *.ada | *.adb | *.ads | *.asm | \ -+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ -+ *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup) -+ func_xform "$libobj" -+ libobj=$func_xform_result -+ ;; -+ esac -+ -+ case $libobj in -+ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; -+ *) -+ func_fatal_error "cannot determine name of library object from \`$libobj'" -+ ;; -+ esac -+ -+ func_infer_tag $base_compile -+ -+ for arg in $later; do -+ case $arg in -+ -shared) -+ test "$build_libtool_libs" != yes && \ -+ func_fatal_configuration "can not build a shared library" -+ build_old_libs=no - continue - ;; - -- *.la) -- # A libtool-controlled library. -+ -static) -+ build_libtool_libs=no -+ build_old_libs=yes -+ continue -+ ;; - -- if test "$prev" = dlfiles; then -- # This library was specified with -dlopen. -- dlfiles="$dlfiles $arg" -- prev= -- elif test "$prev" = dlprefiles; then -- # The library was specified with -dlpreopen. -- dlprefiles="$dlprefiles $arg" -- prev= -- else -- deplibs="$deplibs $arg" -- fi -+ -prefer-pic) -+ pic_mode=yes - continue - ;; - -- # Some other compiler argument. -- *) -- # Unknown arguments in both finalize_command and compile_command need -- # to be aesthetically quoted because they are evaled later. -- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` -- case $arg in -- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") -- arg="\"$arg\"" -- ;; -- esac -+ -prefer-non-pic) -+ pic_mode=no -+ continue - ;; -- esac # arg -+ esac -+ done - -- # Now actually substitute the argument into the commands. -- if test -n "$arg"; then -- compile_command="$compile_command $arg" -- finalize_command="$finalize_command $arg" -- fi -- done # argument parsing loop -+ func_quote_for_eval "$libobj" -+ test "X$libobj" != "X$func_quote_for_eval_result" \ -+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ -+ && func_warning "libobj name \`$libobj' may not contain shell special characters." -+ func_dirname_and_basename "$obj" "/" "" -+ objname="$func_basename_result" -+ xdir="$func_dirname_result" -+ lobj=${xdir}$objdir/$objname - -- if test -n "$prev"; then -- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -- fi -+ test -z "$base_compile" && \ -+ func_fatal_help "you must specify a compilation command" - -- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then -- eval arg=\"$export_dynamic_flag_spec\" -- compile_command="$compile_command $arg" -- finalize_command="$finalize_command $arg" -+ # Delete any leftover library objects. -+ if test "$build_old_libs" = yes; then -+ removelist="$obj $lobj $libobj ${libobj}T" -+ else -+ removelist="$lobj $libobj ${libobj}T" - fi - -- # calculate the name of the file, without its directory -- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` -- libobjs_save="$libobjs" -+ # On Cygwin there's no "real" PIC flag so we must build both object types -+ case $host_os in -+ cygwin* | mingw* | pw32* | os2* | cegcc*) -+ pic_mode=default -+ ;; -+ esac -+ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then -+ # non-PIC code in shared libraries is not supported -+ pic_mode=default -+ fi - -- if test -n "$shlibpath_var"; then -- # get the directories listed in $shlibpath_var -- eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` -+ # Calculate the filename of the output object if compiler does -+ # not support -o with -c -+ if test "$compiler_c_o" = no; then -+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} -+ lockfile="$output_obj.lock" - else -- shlib_search_path= -+ output_obj= -+ need_locks=no -+ lockfile= - fi -- eval sys_lib_search_path=\"$sys_lib_search_path_spec\" -- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - -- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` -- if test "X$output_objdir" = "X$output"; then -- output_objdir="$objdir" -- else -- output_objdir="$output_objdir/$objdir" -- fi -- # Create the object directory. -- if test ! -d $output_objdir; then -- $show "$mkdir $output_objdir" -- $run $mkdir $output_objdir -- status=$? -- if test $status -ne 0 && test ! -d $output_objdir; then -- exit $status -- fi -- fi -+ # Lock this critical section if it is needed -+ # We use this script file to make the link, it avoids creating a new file -+ if test "$need_locks" = yes; then -+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do -+ func_echo "Waiting for $lockfile to be removed" -+ sleep 2 -+ done -+ elif test "$need_locks" = warn; then -+ if test -f "$lockfile"; then -+ $ECHO "\ -+*** ERROR, $lockfile exists and contains: -+`cat $lockfile 2>/dev/null` - -- # Determine the type of output -- case $output in -- "") -- $echo "$modename: you must specify an output file" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -- ;; -- *.$libext) linkmode=oldlib ;; -- *.lo | *.$objext) linkmode=obj ;; -- *.la) linkmode=lib ;; -- *) linkmode=prog ;; # Anything else should be a program. -- esac -+This indicates that another process is trying to use the same -+temporary object file, and libtool could not work around it because -+your compiler does not support \`-c' and \`-o' together. If you -+repeat this compilation, it may succeed, by chance, but you had better -+avoid parallel builds (make -j) in this platform, or get a better -+compiler." - -- specialdeplibs= -- libs= -- # Find all interdependent deplibs by searching for libraries -- # that are linked more than once (e.g. -la -lb -la) -- for deplib in $deplibs; do -- case "$libs " in -- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -- esac -- libs="$libs $deplib" -- done -- deplibs= -- newdependency_libs= -- newlib_search_path= -- need_relink=no # whether we're linking any uninstalled libtool libraries -- notinst_deplibs= # not-installed libtool libraries -- notinst_path= # paths that contain not-installed libtool libraries -- case $linkmode in -- lib) -- passes="conv link" -- for file in $dlfiles $dlprefiles; do -- case $file in -- *.la) ;; -- *) -- $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 -- exit 1 -- ;; -- esac -- done -- ;; -- prog) -- compile_deplibs= -- finalize_deplibs= -- alldeplibs=no -- newdlfiles= -- newdlprefiles= -- passes="conv scan dlopen dlpreopen link" -- ;; -- *) passes="conv" -- ;; -- esac -- for pass in $passes; do -- if test $linkmode = prog; then -- # Determine which files to process -- case $pass in -- dlopen) -- libs="$dlfiles" -- save_deplibs="$deplibs" # Collect dlpreopened libraries -- deplibs= -- ;; -- dlpreopen) libs="$dlprefiles" ;; -- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; -- esac -+ $opt_dry_run || $RM $removelist -+ exit $EXIT_FAILURE - fi -- for deplib in $libs; do -- lib= -- found=no -- case $deplib in -- -l*) -- if test $linkmode = oldlib && test $linkmode = obj; then -- $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 -- continue -- fi -- if test $pass = conv; then -- deplibs="$deplib $deplibs" -- continue -- fi -- name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` -- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do -- # Search the libtool library -- lib="$searchdir/lib${name}.la" -- if test -f "$lib"; then -- found=yes -- break -- fi -- done -- if test "$found" != yes; then -- # deplib doesn't seem to be a libtool library -- if test "$linkmode,$pass" = "prog,link"; then -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- else -- deplibs="$deplib $deplibs" -- test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs" -- fi -- continue -- fi -- ;; # -l -- -L*) -- case $linkmode in -- lib) -- deplibs="$deplib $deplibs" -- test $pass = conv && continue -- newdependency_libs="$deplib $newdependency_libs" -- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` -- ;; -- prog) -- if test $pass = conv; then -- deplibs="$deplib $deplibs" -- continue -- fi -- if test $pass = scan; then -- deplibs="$deplib $deplibs" -- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` -- else -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- fi -- ;; -- *) -- $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 -- ;; -- esac # linkmode -- continue -- ;; # -L -- -R*) -- if test $pass = link; then -- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` -- # Make sure the xrpath contains only unique directories. -- case "$xrpath " in -- *" $dir "*) ;; -- *) xrpath="$xrpath $dir" ;; -- esac -- fi -- deplibs="$deplib $deplibs" -- continue -- ;; -- *.la) lib="$deplib" ;; -- *.$libext) -- if test $pass = conv; then -- deplibs="$deplib $deplibs" -- continue -- fi -- case $linkmode in -- lib) -- if test "$deplibs_check_method" != pass_all; then -- echo -- echo "*** Warning: This library needs some functionality provided by $deplib." -- echo "*** I have the capability to make that library automatically link in when" -- echo "*** you link to this library. But I can only do this if you have a" -- echo "*** shared version of the library, which you do not appear to have." -- else -- echo -- echo "*** Warning: Linking the shared library $output against the" -- echo "*** static library $deplib is not portable!" -- deplibs="$deplib $deplibs" -- fi -- continue -- ;; -- prog) -- if test $pass != link; then -- deplibs="$deplib $deplibs" -- else -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- fi -- continue -- ;; -- esac # linkmode -- ;; # *.$libext -- *.lo | *.$objext) -- if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then -- # If there is no dlopen support or we're linking statically, -- # we need to preload. -- newdlprefiles="$newdlprefiles $deplib" -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- else -- newdlfiles="$newdlfiles $deplib" -- fi -- continue -- ;; -- %DEPLIBS%) -- alldeplibs=yes -- continue -- ;; -- esac # case $deplib -- if test $found = yes || test -f "$lib"; then : -- else -- $echo "$modename: cannot find the library \`$lib'" 1>&2 -- exit 1 -- fi -+ func_append removelist " $output_obj" -+ $ECHO "$srcfile" > "$lockfile" -+ fi - -- # Check to see that this really is a libtool archive. -- if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : -- else -- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 -- exit 1 -- fi -+ $opt_dry_run || $RM $removelist -+ func_append removelist " $lockfile" -+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 -+ -+ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 -+ srcfile=$func_to_tool_file_result -+ func_quote_for_eval "$srcfile" -+ qsrcfile=$func_quote_for_eval_result - -- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` -- test "X$ladir" = "X$lib" && ladir="." -+ # Only build a PIC object if we are building libtool libraries. -+ if test "$build_libtool_libs" = yes; then -+ # Without this assignment, base_compile gets emptied. -+ fbsd_hideous_sh_bug=$base_compile - -- dlname= -- dlopen= -- dlpreopen= -- libdir= -- library_names= -- old_library= -- # If the library was installed with an old release of libtool, -- # it will not redefine variable installed. -- installed=yes -+ if test "$pic_mode" != no; then -+ command="$base_compile $qsrcfile $pic_flag" -+ else -+ # Don't build PIC code -+ command="$base_compile $qsrcfile" -+ fi - -- # Read the .la file -- case $lib in -- */* | *\\*) . $lib ;; -- *) . ./$lib ;; -- esac -+ func_mkdir_p "$xdir$objdir" - -- if test "$linkmode,$pass" = "lib,link" || -- test "$linkmode,$pass" = "prog,scan" || -- { test $linkmode = oldlib && test $linkmode = obj; }; then -- # Add dl[pre]opened files of deplib -- test -n "$dlopen" && dlfiles="$dlfiles $dlopen" -- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" -- fi -+ if test -z "$output_obj"; then -+ # Place PIC objects in $objdir -+ func_append command " -o $lobj" -+ fi - -- if test $pass = conv; then -- # Only check for convenience libraries -- deplibs="$lib $deplibs" -- if test -z "$libdir"; then -- if test -z "$old_library"; then -- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 -- exit 1 -- fi -- # It is a libtool convenience library, so add in its objects. -- convenience="$convenience $ladir/$objdir/$old_library" -- old_convenience="$old_convenience $ladir/$objdir/$old_library" -- tmp_libs= -- for deplib in $dependency_libs; do -- deplibs="$deplib $deplibs" -- case "$tmp_libs " in -- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -- esac -- tmp_libs="$tmp_libs $deplib" -- done -- elif test $linkmode != prog && test $linkmode != lib; then -- $echo "$modename: \`$lib' is not a convenience library" 1>&2 -- exit 1 -- fi -- continue -- fi # $pass = conv -+ func_show_eval_locale "$command" \ -+ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' - -- # Get the name of the library we link against. -- linklib= -- for l in $old_library $library_names; do -- linklib="$l" -- done -- if test -z "$linklib"; then -- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 -- exit 1 -- fi -+ if test "$need_locks" = warn && -+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then -+ $ECHO "\ -+*** ERROR, $lockfile contains: -+`cat $lockfile 2>/dev/null` - -- # This library was specified with -dlopen. -- if test $pass = dlopen; then -- if test -z "$libdir"; then -- $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 -- exit 1 -- fi -- if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then -- # If there is no dlname, no dlopen support or we're linking -- # statically, we need to preload. -- dlprefiles="$dlprefiles $lib" -- else -- newdlfiles="$newdlfiles $lib" -- fi -- continue -- fi # $pass = dlopen -+but it should contain: -+$srcfile - -- # We need an absolute path. -- case $ladir in -- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; -- *) -- abs_ladir=`cd "$ladir" && pwd` -- if test -z "$abs_ladir"; then -- $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 -- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 -- abs_ladir="$ladir" -- fi -- ;; -- esac -- laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` -+This indicates that another process is trying to use the same -+temporary object file, and libtool could not work around it because -+your compiler does not support \`-c' and \`-o' together. If you -+repeat this compilation, it may succeed, by chance, but you had better -+avoid parallel builds (make -j) in this platform, or get a better -+compiler." - -- # Find the relevant object directory and library name. -- if test "X$installed" = Xyes; then -- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then -- $echo "$modename: warning: library \`$lib' was moved." 1>&2 -- dir="$ladir" -- absdir="$abs_ladir" -- libdir="$abs_ladir" -- else -- dir="$libdir" -- absdir="$libdir" -- fi -- else -- dir="$ladir/$objdir" -- absdir="$abs_ladir/$objdir" -- # Remove this search path later -- notinst_path="$notinst_path $abs_ladir" -- fi # $installed = yes -- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` -+ $opt_dry_run || $RM $removelist -+ exit $EXIT_FAILURE -+ fi - -- # This library was specified with -dlpreopen. -- if test $pass = dlpreopen; then -- if test -z "$libdir"; then -- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 -- exit 1 -- fi -- # Prefer using a static library (so that no silly _DYNAMIC symbols -- # are required to link). -- if test -n "$old_library"; then -- newdlprefiles="$newdlprefiles $dir/$old_library" -- # Otherwise, use the dlname, so that lt_dlopen finds it. -- elif test -n "$dlname"; then -- newdlprefiles="$newdlprefiles $dir/$dlname" -- else -- newdlprefiles="$newdlprefiles $dir/$linklib" -- fi -- fi # $pass = dlpreopen -+ # Just move the object if needed, then go on to compile the next one -+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then -+ func_show_eval '$MV "$output_obj" "$lobj"' \ -+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' -+ fi - -- if test -z "$libdir"; then -- # Link the convenience library -- if test $linkmode = lib; then -- deplibs="$dir/$old_library $deplibs" -- elif test "$linkmode,$pass" = "prog,link"; then -- compile_deplibs="$dir/$old_library $compile_deplibs" -- finalize_deplibs="$dir/$old_library $finalize_deplibs" -- else -- deplibs="$lib $deplibs" -- fi -- continue -- fi -+ # Allow error messages only from the first compilation. -+ if test "$suppress_opt" = yes; then -+ suppress_output=' >/dev/null 2>&1' -+ fi -+ fi - -- if test $linkmode = prog && test $pass != link; then -- newlib_search_path="$newlib_search_path $ladir" -- deplibs="$lib $deplibs" -+ # Only build a position-dependent object if we build old libraries. -+ if test "$build_old_libs" = yes; then -+ if test "$pic_mode" != yes; then -+ # Don't build PIC code -+ command="$base_compile $qsrcfile$pie_flag" -+ else -+ command="$base_compile $qsrcfile $pic_flag" -+ fi -+ if test "$compiler_c_o" = yes; then -+ func_append command " -o $obj" -+ fi - -- linkalldeplibs=no -- if test "$link_all_deplibs" != no || test -z "$library_names" || -- test "$build_libtool_libs" = no; then -- linkalldeplibs=yes -- fi -+ # Suppress compiler output if we already did a PIC compilation. -+ func_append command "$suppress_output" -+ func_show_eval_locale "$command" \ -+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' - -- tmp_libs= -- for deplib in $dependency_libs; do -- case $deplib in -- -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test -- esac -- # Need to link against all dependency_libs? -- if test $linkalldeplibs = yes; then -- deplibs="$deplib $deplibs" -- else -- # Need to hardcode shared library paths -- # or/and link against static libraries -- newdependency_libs="$deplib $newdependency_libs" -- fi -- case "$tmp_libs " in -- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -- esac -- tmp_libs="$tmp_libs $deplib" -- done # for deplib -- continue -- fi # $linkmode = prog... -+ if test "$need_locks" = warn && -+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then -+ $ECHO "\ -+*** ERROR, $lockfile contains: -+`cat $lockfile 2>/dev/null` - -- link_static=no # Whether the deplib will be linked statically -- if test -n "$library_names" && -- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then -- # Link against this shared library -+but it should contain: -+$srcfile - -- if test "$linkmode,$pass" = "prog,link" || -- { test $linkmode = lib && test $hardcode_into_libs = yes; }; then -- # Hardcode the library path. -- # Skip directories that are in the system default run-time -- # search path. -- case " $sys_lib_dlsearch_path " in -- *" $absdir "*) ;; -- *) -- case "$compile_rpath " in -- *" $absdir "*) ;; -- *) compile_rpath="$compile_rpath $absdir" -- esac -- ;; -- esac -- case " $sys_lib_dlsearch_path " in -- *" $libdir "*) ;; -- *) -- case "$finalize_rpath " in -- *" $libdir "*) ;; -- *) finalize_rpath="$finalize_rpath $libdir" -- esac -- ;; -- esac -- if test $linkmode = prog; then -- # We need to hardcode the library path -- if test -n "$shlibpath_var"; then -- # Make sure the rpath contains only unique directories. -- case "$temp_rpath " in -- *" $dir "*) ;; -- *" $absdir "*) ;; -- *) temp_rpath="$temp_rpath $dir" ;; -- esac -- fi -- fi -- fi # $linkmode,$pass = prog,link... -+This indicates that another process is trying to use the same -+temporary object file, and libtool could not work around it because -+your compiler does not support \`-c' and \`-o' together. If you -+repeat this compilation, it may succeed, by chance, but you had better -+avoid parallel builds (make -j) in this platform, or get a better -+compiler." - -- if test "$alldeplibs" = yes && -- { test "$deplibs_check_method" = pass_all || -- { test "$build_libtool_libs" = yes && -- test -n "$library_names"; }; }; then -- # We only need to search for static libraries -- continue -- fi -+ $opt_dry_run || $RM $removelist -+ exit $EXIT_FAILURE -+ fi - -- if test "$installed" = no; then -- notinst_deplibs="$notinst_deplibs $lib" -- need_relink=yes -- fi -+ # Just move the object if needed -+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then -+ func_show_eval '$MV "$output_obj" "$obj"' \ -+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' -+ fi -+ fi - -- if test -n "$old_archive_from_expsyms_cmds"; then -- # figure out the soname -- set dummy $library_names -- realname="$2" -- shift; shift -- libname=`eval \\$echo \"$libname_spec\"` -- # use dlname if we got it. it's perfectly good, no? -- if test -n "$dlname"; then -- soname="$dlname" -- elif test -n "$soname_spec"; then -- # bleh windows -- case $host in -- *cygwin*) -- major=`expr $current - $age` -- versuffix="-$major" -- ;; -- esac -- eval soname=\"$soname_spec\" -- else -- soname="$realname" -- fi -+ $opt_dry_run || { -+ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" - -- # Make a new name for the extract_expsyms_cmds to use -- soroot="$soname" -- soname=`echo $soroot | sed -e 's/^.*\///'` -- newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a" -+ # Unlock the critical section if it was locked -+ if test "$need_locks" != no; then -+ removelist=$lockfile -+ $RM "$lockfile" -+ fi -+ } - -- # If the library has no export list, then create one now -- if test -f "$output_objdir/$soname-def"; then : -- else -- $show "extracting exported symbol list from \`$soname'" -- save_ifs="$IFS"; IFS='~' -- eval cmds=\"$extract_expsyms_cmds\" -- for cmd in $cmds; do -- IFS="$save_ifs" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -- IFS="$save_ifs" -- fi -+ exit $EXIT_SUCCESS -+} - -- # Create $newlib -- if test -f "$output_objdir/$newlib"; then :; else -- $show "generating import library for \`$soname'" -- save_ifs="$IFS"; IFS='~' -- eval cmds=\"$old_archive_from_expsyms_cmds\" -- for cmd in $cmds; do -- IFS="$save_ifs" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -- IFS="$save_ifs" -- fi -- # make sure the library variables are pointing to the new library -- dir=$output_objdir -- linklib=$newlib -- fi # test -n $old_archive_from_expsyms_cmds -+$opt_help || { -+ test "$opt_mode" = compile && func_mode_compile ${1+"$@"} -+} - -- if test $linkmode = prog || test "$mode" != relink; then -- add_shlibpath= -- add_dir= -- add= -- lib_linked=yes -- case $hardcode_action in -- immediate | unsupported) -- if test "$hardcode_direct" = no; then -- add="$dir/$linklib" -- elif test "$hardcode_minus_L" = no; then -- case $host in -- *-*-sunos*) add_shlibpath="$dir" ;; -- esac -- add_dir="-L$dir" -- add="-l$name" -- elif test "$hardcode_shlibpath_var" = no; then -- add_shlibpath="$dir" -- add="-l$name" -- else -- lib_linked=no -- fi -- ;; -- relink) -- if test "$hardcode_direct" = yes; then -- add="$dir/$linklib" -- elif test "$hardcode_minus_L" = yes; then -- add_dir="-L$dir" -- add="-l$name" -- elif test "$hardcode_shlibpath_var" = yes; then -- add_shlibpath="$dir" -- add="-l$name" -- else -- lib_linked=no -- fi -- ;; -- *) lib_linked=no ;; -- esac -+func_mode_help () -+{ -+ # We need to display help for each of the modes. -+ case $opt_mode in -+ "") -+ # Generic help is extracted from the usage comments -+ # at the start of this file. -+ func_help -+ ;; -+ -+ clean) -+ $ECHO \ -+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -- if test "$lib_linked" != yes; then -- $echo "$modename: configuration error: unsupported hardcode properties" -- exit 1 -- fi -+Remove files from the build directory. - -- if test -n "$add_shlibpath"; then -- case :$compile_shlibpath: in -- *":$add_shlibpath:"*) ;; -- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; -- esac -- fi -- if test $linkmode = prog; then -- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" -- test -n "$add" && compile_deplibs="$add $compile_deplibs" -- else -- test -n "$add_dir" && deplibs="$add_dir $deplibs" -- test -n "$add" && deplibs="$add $deplibs" -- if test "$hardcode_direct" != yes && \ -- test "$hardcode_minus_L" != yes && \ -- test "$hardcode_shlibpath_var" = yes; then -- case :$finalize_shlibpath: in -- *":$libdir:"*) ;; -- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; -- esac -- fi -- fi -- fi -+RM is the name of the program to use to delete files associated with each FILE -+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -+to RM. - -- if test $linkmode = prog || test "$mode" = relink; then -- add_shlibpath= -- add_dir= -- add= -- # Finalize command for both is simple: just hardcode it. -- if test "$hardcode_direct" = yes; then -- add="$libdir/$linklib" -- elif test "$hardcode_minus_L" = yes; then -- add_dir="-L$libdir" -- add="-l$name" -- elif test "$hardcode_shlibpath_var" = yes; then -- case :$finalize_shlibpath: in -- *":$libdir:"*) ;; -- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; -- esac -- add="-l$name" -- else -- # We cannot seem to hardcode it, guess we'll fake it. -- add_dir="-L$libdir" -- add="-l$name" -- fi -+If FILE is a libtool library, object or program, all the files associated -+with it are deleted. Otherwise, only FILE itself is deleted using RM." -+ ;; - -- if test $linkmode = prog; then -- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" -- test -n "$add" && finalize_deplibs="$add $finalize_deplibs" -- else -- test -n "$add_dir" && deplibs="$add_dir $deplibs" -- test -n "$add" && deplibs="$add $deplibs" -- fi -- fi -- elif test $linkmode = prog; then -- if test "$alldeplibs" = yes && -- { test "$deplibs_check_method" = pass_all || -- { test "$build_libtool_libs" = yes && -- test -n "$library_names"; }; }; then -- # We only need to search for static libraries -- continue -- fi -+ compile) -+ $ECHO \ -+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -- # Try to link the static library -- # Here we assume that one of hardcode_direct or hardcode_minus_L -- # is not unsupported. This is valid on all known static and -- # shared platforms. -- if test "$hardcode_direct" != unsupported; then -- test -n "$old_library" && linklib="$old_library" -- compile_deplibs="$dir/$linklib $compile_deplibs" -- finalize_deplibs="$dir/$linklib $finalize_deplibs" -- else -- compile_deplibs="-l$name -L$dir $compile_deplibs" -- finalize_deplibs="-l$name -L$dir $finalize_deplibs" -- fi -- elif test "$build_libtool_libs" = yes; then -- # Not a shared library -- if test "$deplibs_check_method" != pass_all; then -- # We're trying link a shared library against a static one -- # but the system doesn't support it. -+Compile a source file into a libtool library object. - -- # Just print a warning and add the library to dependency_libs so -- # that the program can be linked against the static library. -- echo -- echo "*** Warning: This library needs some functionality provided by $lib." -- echo "*** I have the capability to make that library automatically link in when" -- echo "*** you link to this library. But I can only do this if you have a" -- echo "*** shared version of the library, which you do not appear to have." -- if test "$module" = yes; then -- echo "*** Therefore, libtool will create a static module, that should work " -- echo "*** as long as the dlopening application is linked with the -dlopen flag." -- if test -z "$global_symbol_pipe"; then -- echo -- echo "*** However, this would only work if libtool was able to extract symbol" -- echo "*** lists from a program, using \`nm' or equivalent, but libtool could" -- echo "*** not find such a program. So, this module is probably useless." -- echo "*** \`nm' from GNU binutils and a full rebuild may help." -- fi -- if test "$build_old_libs" = no; then -- build_libtool_libs=module -- build_old_libs=yes -- else -- build_libtool_libs=no -- fi -- fi -- else -- convenience="$convenience $dir/$old_library" -- old_convenience="$old_convenience $dir/$old_library" -- deplibs="$dir/$old_library $deplibs" -- link_static=yes -- fi -- fi # link shared/static library? -+This mode accepts the following additional options: - -- if test $linkmode = lib; then -- if test -n "$dependency_libs" && -- { test $hardcode_into_libs != yes || test $build_old_libs = yes || -- test $link_static = yes; }; then -- # Extract -R from dependency_libs -- temp_deplibs= -- for libdir in $dependency_libs; do -- case $libdir in -- -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` -- case " $xrpath " in -- *" $temp_xrpath "*) ;; -- *) xrpath="$xrpath $temp_xrpath";; -- esac;; -- *) temp_deplibs="$temp_deplibs $libdir";; -- esac -- done -- dependency_libs="$temp_deplibs" -- fi -+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE -+ -no-suppress do not suppress compiler output for multiple passes -+ -prefer-pic try to build PIC objects only -+ -prefer-non-pic try to build non-PIC objects only -+ -shared do not build a \`.o' file suitable for static linking -+ -static only build a \`.o' file suitable for static linking -+ -Wc,FLAG pass FLAG directly to the compiler - -- newlib_search_path="$newlib_search_path $absdir" -- # Link against this library -- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" -- # ... and its dependency_libs -- tmp_libs= -- for deplib in $dependency_libs; do -- newdependency_libs="$deplib $newdependency_libs" -- case "$tmp_libs " in -- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -- esac -- tmp_libs="$tmp_libs $deplib" -- done -+COMPILE-COMMAND is a command to be used in creating a \`standard' object file -+from the given SOURCEFILE. - -- if test $link_all_deplibs != no; then -- # Add the search paths of all dependency libraries -- for deplib in $dependency_libs; do -- case $deplib in -- -L*) path="$deplib" ;; -- *.la) -- dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` -- test "X$dir" = "X$deplib" && dir="." -- # We need an absolute path. -- case $dir in -- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; -- *) -- absdir=`cd "$dir" && pwd` -- if test -z "$absdir"; then -- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 -- absdir="$dir" -- fi -- ;; -- esac -- if grep "^installed=no" $deplib > /dev/null; then -- path="-L$absdir/$objdir" -- else -- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` -- if test -z "$libdir"; then -- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 -- exit 1 -- fi -- if test "$absdir" != "$libdir"; then -- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 -- fi -- path="-L$absdir" -- fi -- ;; -- *) continue ;; -- esac -- case " $deplibs " in -- *" $path "*) ;; -- *) deplibs="$deplibs $path" ;; -- esac -- done -- fi # link_all_deplibs != no -- fi # linkmode = lib -- done # for deplib in $libs -- if test $pass = dlpreopen; then -- # Link the dlpreopened libraries before other libraries -- for deplib in $save_deplibs; do -- deplibs="$deplib $deplibs" -- done -- fi -- if test $pass != dlopen; then -- test $pass != scan && dependency_libs="$newdependency_libs" -- if test $pass != conv; then -- # Make sure lib_search_path contains only unique directories. -- lib_search_path= -- for dir in $newlib_search_path; do -- case "$lib_search_path " in -- *" $dir "*) ;; -- *) lib_search_path="$lib_search_path $dir" ;; -- esac -- done -- newlib_search_path= -+The output file name is determined by removing the directory component from -+SOURCEFILE, then substituting the C source code suffix \`.c' with the -+library object suffix, \`.lo'." -+ ;; -+ -+ execute) -+ $ECHO \ -+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... -+ -+Automatically set library path, then run a program. -+ -+This mode accepts the following additional options: -+ -+ -dlopen FILE add the directory containing FILE to the library path -+ -+This mode sets the library path environment variable according to \`-dlopen' -+flags. -+ -+If any of the ARGS are libtool executable wrappers, then they are translated -+into their corresponding uninstalled binary, and any of their required library -+directories are added to the library path. -+ -+Then, COMMAND is executed, with ARGS as arguments." -+ ;; -+ -+ finish) -+ $ECHO \ -+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... -+ -+Complete the installation of libtool libraries. -+ -+Each LIBDIR is a directory that contains libtool libraries. -+ -+The commands that this mode executes may require superuser privileges. Use -+the \`--dry-run' option if you just want to see what would be executed." -+ ;; -+ -+ install) -+ $ECHO \ -+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... -+ -+Install executables or libraries. -+ -+INSTALL-COMMAND is the installation command. The first component should be -+either the \`install' or \`cp' program. -+ -+The following components of INSTALL-COMMAND are treated specially: -+ -+ -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation -+ -+The rest of the components are interpreted as arguments to that command (only -+BSD-compatible install options are recognized)." -+ ;; -+ -+ link) -+ $ECHO \ -+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... -+ -+Link object files or libraries together to form another library, or to -+create an executable program. -+ -+LINK-COMMAND is a command using the C compiler that you would use to create -+a program from several object files. -+ -+The following components of LINK-COMMAND are treated specially: -+ -+ -all-static do not do any dynamic linking at all -+ -avoid-version do not add a version suffix if possible -+ -bindir BINDIR specify path to binaries directory (for systems where -+ libraries must be found in the PATH setting at runtime) -+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -+ -export-symbols SYMFILE -+ try to export only the symbols listed in SYMFILE -+ -export-symbols-regex REGEX -+ try to export only the symbols matching REGEX -+ -LLIBDIR search LIBDIR for required installed libraries -+ -lNAME OUTPUT-FILE requires the installed library libNAME -+ -module build a library that can dlopened -+ -no-fast-install disable the fast-install mode -+ -no-install link a not-installable executable -+ -no-undefined declare that a library does not refer to external symbols -+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -+ -objectlist FILE Use a list of object files found in FILE to specify objects -+ -precious-files-regex REGEX -+ don't remove output files matching REGEX -+ -release RELEASE specify package release information -+ -rpath LIBDIR the created library will eventually be installed in LIBDIR -+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -+ -shared only do dynamic linking of libtool libraries -+ -shrext SUFFIX override the standard shared library file extension -+ -static do not do any dynamic linking of uninstalled libtool libraries -+ -static-libtool-libs -+ do not do any dynamic linking of libtool libraries -+ -version-info CURRENT[:REVISION[:AGE]] -+ specify library version info [each variable defaults to 0] -+ -weak LIBNAME declare that the target provides the LIBNAME interface -+ -Wc,FLAG -+ -Xcompiler FLAG pass linker-specific FLAG directly to the compiler -+ -Wl,FLAG -+ -Xlinker FLAG pass linker-specific FLAG directly to the linker -+ -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) -+ -+All other options (arguments beginning with \`-') are ignored. -+ -+Every other argument is treated as a filename. Files ending in \`.la' are -+treated as uninstalled libtool libraries, other files are standard or library -+object files. -+ -+If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -+only library objects (\`.lo' files) may be specified, and \`-rpath' is -+required, except when creating a convenience library. -+ -+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -+using \`ar' and \`ranlib', or on Windows using \`lib'. -+ -+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -+is created, otherwise an executable program is created." -+ ;; -+ -+ uninstall) -+ $ECHO \ -+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... -+ -+Remove libraries from an installation directory. -+ -+RM is the name of the program to use to delete files associated with each FILE -+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -+to RM. -+ -+If FILE is a libtool library, all the files associated with it are deleted. -+Otherwise, only FILE itself is deleted using RM." -+ ;; -+ -+ *) -+ func_fatal_help "invalid operation mode \`$opt_mode'" -+ ;; -+ esac -+ -+ echo -+ $ECHO "Try \`$progname --help' for more information about other modes." -+} -+ -+# Now that we've collected a possible --mode arg, show help if necessary -+if $opt_help; then -+ if test "$opt_help" = :; then -+ func_mode_help -+ else -+ { -+ func_help noexit -+ for opt_mode in compile link execute install finish uninstall clean; do -+ func_mode_help -+ done -+ } | sed -n '1p; 2,$s/^Usage:/ or: /p' -+ { -+ func_help noexit -+ for opt_mode in compile link execute install finish uninstall clean; do -+ echo -+ func_mode_help -+ done -+ } | -+ sed '1d -+ /^When reporting/,/^Report/{ -+ H -+ d -+ } -+ $x -+ /information about other modes/d -+ /more detailed .*MODE/d -+ s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' -+ fi -+ exit $? -+fi -+ -+ -+# func_mode_execute arg... -+func_mode_execute () -+{ -+ $opt_debug -+ # The first argument is the command name. -+ cmd="$nonopt" -+ test -z "$cmd" && \ -+ func_fatal_help "you must specify a COMMAND" -+ -+ # Handle -dlopen flags immediately. -+ for file in $opt_dlopen; do -+ test -f "$file" \ -+ || func_fatal_help "\`$file' is not a file" -+ -+ dir= -+ case $file in -+ *.la) -+ func_resolve_sysroot "$file" -+ file=$func_resolve_sysroot_result -+ -+ # Check to see that this really is a libtool archive. -+ func_lalib_unsafe_p "$file" \ -+ || func_fatal_help "\`$lib' is not a valid libtool archive" -+ -+ # Read the libtool library. -+ dlname= -+ library_names= -+ func_source "$file" -+ -+ # Skip this library if it cannot be dlopened. -+ if test -z "$dlname"; then -+ # Warn if it was a shared library. -+ test -n "$library_names" && \ -+ func_warning "\`$file' was not linked with \`-export-dynamic'" -+ continue - fi - -- if test "$linkmode,$pass" != "prog,link"; then -- vars="deplibs" -+ func_dirname "$file" "" "." -+ dir="$func_dirname_result" -+ -+ if test -f "$dir/$objdir/$dlname"; then -+ func_append dir "/$objdir" - else -- vars="compile_deplibs finalize_deplibs" -+ if test ! -f "$dir/$dlname"; then -+ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" -+ fi - fi -- for var in $vars dependency_libs; do -- # Add libraries to $var in reverse order -- eval tmp_libs=\"\$$var\" -- new_libs= -- for deplib in $tmp_libs; do -- case $deplib in -- -L*) new_libs="$deplib $new_libs" ;; -- *) -- case " $specialdeplibs " in -- *" $deplib "*) new_libs="$deplib $new_libs" ;; -- *) -- case " $new_libs " in -- *" $deplib "*) ;; -- *) new_libs="$deplib $new_libs" ;; -- esac -- ;; -- esac -- ;; -- esac -- done -- tmp_libs= -- for deplib in $new_libs; do -- case $deplib in -- -L*) -- case " $tmp_libs " in -- *" $deplib "*) ;; -- *) tmp_libs="$tmp_libs $deplib" ;; -- esac -- ;; -- *) tmp_libs="$tmp_libs $deplib" ;; -- esac -- done -- eval $var=\"$tmp_libs\" -- done # for var -- fi -- if test "$pass" = "conv" && -- { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then -- libs="$deplibs" # reset libs -- deplibs= -- fi -- done # for pass -- if test $linkmode = prog; then -- dlfiles="$newdlfiles" -- dlprefiles="$newdlprefiles" -- fi -+ ;; - -- case $linkmode in -- oldlib) -- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 -- fi -+ *.lo) -+ # Just add the directory containing the .lo file. -+ func_dirname "$file" "" "." -+ dir="$func_dirname_result" -+ ;; -+ -+ *) -+ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" -+ continue -+ ;; -+ esac -+ -+ # Get the absolute pathname. -+ absdir=`cd "$dir" && pwd` -+ test -n "$absdir" && dir="$absdir" -+ -+ # Now add the directory to shlibpath_var. -+ if eval "test -z \"\$$shlibpath_var\""; then -+ eval "$shlibpath_var=\"\$dir\"" -+ else -+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" -+ fi -+ done -+ -+ # This variable tells wrapper scripts just to set shlibpath_var -+ # rather than running their programs. -+ libtool_execute_magic="$magic" -+ -+ # Check if any of the arguments is a wrapper script. -+ args= -+ for file -+ do -+ case $file in -+ -* | *.la | *.lo ) ;; -+ *) -+ # Do a test to see if this is really a libtool program. -+ if func_ltwrapper_script_p "$file"; then -+ func_source "$file" -+ # Transform arg to wrapped name. -+ file="$progdir/$program" -+ elif func_ltwrapper_executable_p "$file"; then -+ func_ltwrapper_scriptname "$file" -+ func_source "$func_ltwrapper_scriptname_result" -+ # Transform arg to wrapped name. -+ file="$progdir/$program" -+ fi -+ ;; -+ esac -+ # Quote arguments (to preserve shell metacharacters). -+ func_append_quoted args "$file" -+ done -+ -+ if test "X$opt_dry_run" = Xfalse; then -+ if test -n "$shlibpath_var"; then -+ # Export the shlibpath_var. -+ eval "export $shlibpath_var" -+ fi -+ -+ # Restore saved environment variables -+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES -+ do -+ eval "if test \"\${save_$lt_var+set}\" = set; then -+ $lt_var=\$save_$lt_var; export $lt_var -+ else -+ $lt_unset $lt_var -+ fi" -+ done -+ -+ # Now prepare to actually exec the command. -+ exec_cmd="\$cmd$args" -+ else -+ # Display what would be done. -+ if test -n "$shlibpath_var"; then -+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" -+ echo "export $shlibpath_var" -+ fi -+ $ECHO "$cmd$args" -+ exit $EXIT_SUCCESS -+ fi -+} -+ -+test "$opt_mode" = execute && func_mode_execute ${1+"$@"} -+ -+ -+# func_mode_finish arg... -+func_mode_finish () -+{ -+ $opt_debug -+ libs= -+ libdirs= -+ admincmds= -+ -+ for opt in "$nonopt" ${1+"$@"} -+ do -+ if test -d "$opt"; then -+ func_append libdirs " $opt" -+ -+ elif test -f "$opt"; then -+ if func_lalib_unsafe_p "$opt"; then -+ func_append libs " $opt" -+ else -+ func_warning "\`$opt' is not a valid libtool archive" -+ fi -+ -+ else -+ func_fatal_error "invalid argument \`$opt'" -+ fi -+ done -+ -+ if test -n "$libs"; then -+ if test -n "$lt_sysroot"; then -+ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` -+ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" -+ else -+ sysroot_cmd= -+ fi -+ -+ # Remove sysroot references -+ if $opt_dry_run; then -+ for lib in $libs; do -+ echo "removing references to $lt_sysroot and \`=' prefixes from $lib" -+ done -+ else -+ tmpdir=`func_mktempdir` -+ for lib in $libs; do -+ sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ -+ > $tmpdir/tmp-la -+ mv -f $tmpdir/tmp-la $lib -+ done -+ ${RM}r "$tmpdir" -+ fi -+ fi -+ -+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then -+ for libdir in $libdirs; do -+ if test -n "$finish_cmds"; then -+ # Do each command in the finish commands. -+ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds -+'"$cmd"'"' -+ fi -+ if test -n "$finish_eval"; then -+ # Do the single finish_eval. -+ eval cmds=\"$finish_eval\" -+ $opt_dry_run || eval "$cmds" || func_append admincmds " -+ $cmds" -+ fi -+ done -+ fi -+ -+ # Exit here if they wanted silent mode. -+ $opt_silent && exit $EXIT_SUCCESS -+ -+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then -+ echo "----------------------------------------------------------------------" -+ echo "Libraries have been installed in:" -+ for libdir in $libdirs; do -+ $ECHO " $libdir" -+ done -+ echo -+ echo "If you ever happen to want to link against installed libraries" -+ echo "in a given directory, LIBDIR, you must either use libtool, and" -+ echo "specify the full pathname of the library, or use the \`-LLIBDIR'" -+ echo "flag during linking and do at least one of the following:" -+ if test -n "$shlibpath_var"; then -+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable" -+ echo " during execution" -+ fi -+ if test -n "$runpath_var"; then -+ echo " - add LIBDIR to the \`$runpath_var' environment variable" -+ echo " during linking" -+ fi -+ if test -n "$hardcode_libdir_flag_spec"; then -+ libdir=LIBDIR -+ eval flag=\"$hardcode_libdir_flag_spec\" -+ -+ $ECHO " - use the \`$flag' linker flag" -+ fi -+ if test -n "$admincmds"; then -+ $ECHO " - have your system administrator run these commands:$admincmds" -+ fi -+ if test -f /etc/ld.so.conf; then -+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" -+ fi -+ echo -+ -+ echo "See any operating system documentation about shared libraries for" -+ case $host in -+ solaris2.[6789]|solaris2.1[0-9]) -+ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" -+ echo "pages." -+ ;; -+ *) -+ echo "more information, such as the ld(1) and ld.so(8) manual pages." -+ ;; -+ esac -+ echo "----------------------------------------------------------------------" -+ fi -+ exit $EXIT_SUCCESS -+} -+ -+test "$opt_mode" = finish && func_mode_finish ${1+"$@"} -+ -+ -+# func_mode_install arg... -+func_mode_install () -+{ -+ $opt_debug -+ # There may be an optional sh(1) argument at the beginning of -+ # install_prog (especially on Windows NT). -+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || -+ # Allow the use of GNU shtool's install command. -+ case $nonopt in *shtool*) :;; *) false;; esac; then -+ # Aesthetically quote it. -+ func_quote_for_eval "$nonopt" -+ install_prog="$func_quote_for_eval_result " -+ arg=$1 -+ shift -+ else -+ install_prog= -+ arg=$nonopt -+ fi -+ -+ # The real first argument should be the name of the installation program. -+ # Aesthetically quote it. -+ func_quote_for_eval "$arg" -+ func_append install_prog "$func_quote_for_eval_result" -+ install_shared_prog=$install_prog -+ case " $install_prog " in -+ *[\\\ /]cp\ *) install_cp=: ;; -+ *) install_cp=false ;; -+ esac -+ -+ # We need to accept at least all the BSD install flags. -+ dest= -+ files= -+ opts= -+ prev= -+ install_type= -+ isdir=no -+ stripme= -+ no_mode=: -+ for arg -+ do -+ arg2= -+ if test -n "$dest"; then -+ func_append files " $dest" -+ dest=$arg -+ continue -+ fi -+ -+ case $arg in -+ -d) isdir=yes ;; -+ -f) -+ if $install_cp; then :; else -+ prev=$arg -+ fi -+ ;; -+ -g | -m | -o) -+ prev=$arg -+ ;; -+ -s) -+ stripme=" -s" -+ continue -+ ;; -+ -*) -+ ;; -+ *) -+ # If the previous option needed an argument, then skip it. -+ if test -n "$prev"; then -+ if test "x$prev" = x-m && test -n "$install_override_mode"; then -+ arg2=$install_override_mode -+ no_mode=false -+ fi -+ prev= -+ else -+ dest=$arg -+ continue -+ fi -+ ;; -+ esac -+ -+ # Aesthetically quote the argument. -+ func_quote_for_eval "$arg" -+ func_append install_prog " $func_quote_for_eval_result" -+ if test -n "$arg2"; then -+ func_quote_for_eval "$arg2" -+ fi -+ func_append install_shared_prog " $func_quote_for_eval_result" -+ done -+ -+ test -z "$install_prog" && \ -+ func_fatal_help "you must specify an install program" -+ -+ test -n "$prev" && \ -+ func_fatal_help "the \`$prev' option requires an argument" -+ -+ if test -n "$install_override_mode" && $no_mode; then -+ if $install_cp; then :; else -+ func_quote_for_eval "$install_override_mode" -+ func_append install_shared_prog " -m $func_quote_for_eval_result" -+ fi -+ fi -+ -+ if test -z "$files"; then -+ if test -z "$dest"; then -+ func_fatal_help "no file or destination specified" -+ else -+ func_fatal_help "you must specify a destination" -+ fi -+ fi -+ -+ # Strip any trailing slash from the destination. -+ func_stripname '' '/' "$dest" -+ dest=$func_stripname_result -+ -+ # Check to see that the destination is a directory. -+ test -d "$dest" && isdir=yes -+ if test "$isdir" = yes; then -+ destdir="$dest" -+ destname= -+ else -+ func_dirname_and_basename "$dest" "" "." -+ destdir="$func_dirname_result" -+ destname="$func_basename_result" -+ -+ # Not a directory, so check to see that there is only one file specified. -+ set dummy $files; shift -+ test "$#" -gt 1 && \ -+ func_fatal_help "\`$dest' is not a directory" -+ fi -+ case $destdir in -+ [\\/]* | [A-Za-z]:[\\/]*) ;; -+ *) -+ for file in $files; do -+ case $file in -+ *.lo) ;; -+ *) -+ func_fatal_help "\`$destdir' must be an absolute directory name" -+ ;; -+ esac -+ done -+ ;; -+ esac -+ -+ # This variable tells wrapper scripts just to set variables rather -+ # than running their programs. -+ libtool_install_magic="$magic" -+ -+ staticlibs= -+ future_libdirs= -+ current_libdirs= -+ for file in $files; do -+ -+ # Do each installation. -+ case $file in -+ *.$libext) -+ # Do the static libraries later. -+ func_append staticlibs " $file" -+ ;; -+ -+ *.la) -+ func_resolve_sysroot "$file" -+ file=$func_resolve_sysroot_result -+ -+ # Check to see that this really is a libtool archive. -+ func_lalib_unsafe_p "$file" \ -+ || func_fatal_help "\`$file' is not a valid libtool archive" -+ -+ library_names= -+ old_library= -+ relink_command= -+ func_source "$file" -+ -+ # Add the libdir to current_libdirs if it is the destination. -+ if test "X$destdir" = "X$libdir"; then -+ case "$current_libdirs " in -+ *" $libdir "*) ;; -+ *) func_append current_libdirs " $libdir" ;; -+ esac -+ else -+ # Note the libdir as a future libdir. -+ case "$future_libdirs " in -+ *" $libdir "*) ;; -+ *) func_append future_libdirs " $libdir" ;; -+ esac -+ fi -+ -+ func_dirname "$file" "/" "" -+ dir="$func_dirname_result" -+ func_append dir "$objdir" -+ -+ if test -n "$relink_command"; then -+ # Determine the prefix the user has applied to our future dir. -+ inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` -+ -+ # Don't allow the user to place us outside of our expected -+ # location b/c this prevents finding dependent libraries that -+ # are installed to the same prefix. -+ # At present, this check doesn't affect windows .dll's that -+ # are installed into $libdir/../bin (currently, that works fine) -+ # but it's something to keep an eye on. -+ test "$inst_prefix_dir" = "$destdir" && \ -+ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" -+ -+ if test -n "$inst_prefix_dir"; then -+ # Stick the inst_prefix_dir data into the link command. -+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` -+ else -+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` -+ fi -+ -+ func_warning "relinking \`$file'" -+ func_show_eval "$relink_command" \ -+ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' -+ fi -+ -+ # See the names of the shared library. -+ set dummy $library_names; shift -+ if test -n "$1"; then -+ realname="$1" -+ shift -+ -+ srcname="$realname" -+ test -n "$relink_command" && srcname="$realname"T -+ -+ # Install the shared library and build the symlinks. -+ func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ -+ 'exit $?' -+ tstripme="$stripme" -+ case $host_os in -+ cygwin* | mingw* | pw32* | cegcc*) -+ case $realname in -+ *.dll.a) -+ tstripme="" -+ ;; -+ esac -+ ;; -+ esac -+ if test -n "$tstripme" && test -n "$striplib"; then -+ func_show_eval "$striplib $destdir/$realname" 'exit $?' -+ fi -+ -+ if test "$#" -gt 0; then -+ # Delete the old symlinks, and create new ones. -+ # Try `ln -sf' first, because the `ln' binary might depend on -+ # the symlink we replace! Solaris /bin/ln does not understand -f, -+ # so we also need to try rm && ln -s. -+ for linkname -+ do -+ test "$linkname" != "$realname" \ -+ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" -+ done -+ fi -+ -+ # Do each command in the postinstall commands. -+ lib="$destdir/$realname" -+ func_execute_cmds "$postinstall_cmds" 'exit $?' -+ fi -+ -+ # Install the pseudo-library for information purposes. -+ func_basename "$file" -+ name="$func_basename_result" -+ instname="$dir/$name"i -+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' -+ -+ # Maybe install the static library, too. -+ test -n "$old_library" && func_append staticlibs " $dir/$old_library" -+ ;; -+ -+ *.lo) -+ # Install (i.e. copy) a libtool object. -+ -+ # Figure out destination file name, if it wasn't already specified. -+ if test -n "$destname"; then -+ destfile="$destdir/$destname" -+ else -+ func_basename "$file" -+ destfile="$func_basename_result" -+ destfile="$destdir/$destfile" -+ fi -+ -+ # Deduce the name of the destination old-style object file. -+ case $destfile in -+ *.lo) -+ func_lo2o "$destfile" -+ staticdest=$func_lo2o_result -+ ;; -+ *.$objext) -+ staticdest="$destfile" -+ destfile= -+ ;; -+ *) -+ func_fatal_help "cannot copy a libtool object to \`$destfile'" -+ ;; -+ esac -+ -+ # Install the libtool object if requested. -+ test -n "$destfile" && \ -+ func_show_eval "$install_prog $file $destfile" 'exit $?' -+ -+ # Install the old object if enabled. -+ if test "$build_old_libs" = yes; then -+ # Deduce the name of the old-style object file. -+ func_lo2o "$file" -+ staticobj=$func_lo2o_result -+ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' -+ fi -+ exit $EXIT_SUCCESS -+ ;; -+ -+ *) -+ # Figure out destination file name, if it wasn't already specified. -+ if test -n "$destname"; then -+ destfile="$destdir/$destname" -+ else -+ func_basename "$file" -+ destfile="$func_basename_result" -+ destfile="$destdir/$destfile" -+ fi -+ -+ # If the file is missing, and there is a .exe on the end, strip it -+ # because it is most likely a libtool script we actually want to -+ # install -+ stripped_ext="" -+ case $file in -+ *.exe) -+ if test ! -f "$file"; then -+ func_stripname '' '.exe' "$file" -+ file=$func_stripname_result -+ stripped_ext=".exe" -+ fi -+ ;; -+ esac -+ -+ # Do a test to see if this is really a libtool program. -+ case $host in -+ *cygwin* | *mingw*) -+ if func_ltwrapper_executable_p "$file"; then -+ func_ltwrapper_scriptname "$file" -+ wrapper=$func_ltwrapper_scriptname_result -+ else -+ func_stripname '' '.exe' "$file" -+ wrapper=$func_stripname_result -+ fi -+ ;; -+ *) -+ wrapper=$file -+ ;; -+ esac -+ if func_ltwrapper_script_p "$wrapper"; then -+ notinst_deplibs= -+ relink_command= -+ -+ func_source "$wrapper" -+ -+ # Check the variables that should have been set. -+ test -z "$generated_by_libtool_version" && \ -+ func_fatal_error "invalid libtool wrapper script \`$wrapper'" -+ -+ finalize=yes -+ for lib in $notinst_deplibs; do -+ # Check to see that each library is installed. -+ libdir= -+ if test -f "$lib"; then -+ func_source "$lib" -+ fi -+ libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test -+ if test -n "$libdir" && test ! -f "$libfile"; then -+ func_warning "\`$lib' has not been installed in \`$libdir'" -+ finalize=no -+ fi -+ done -+ -+ relink_command= -+ func_source "$wrapper" -+ -+ outputname= -+ if test "$fast_install" = no && test -n "$relink_command"; then -+ $opt_dry_run || { -+ if test "$finalize" = yes; then -+ tmpdir=`func_mktempdir` -+ func_basename "$file$stripped_ext" -+ file="$func_basename_result" -+ outputname="$tmpdir/$file" -+ # Replace the output file specification. -+ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` -+ -+ $opt_silent || { -+ func_quote_for_expand "$relink_command" -+ eval "func_echo $func_quote_for_expand_result" -+ } -+ if eval "$relink_command"; then : -+ else -+ func_error "error: relink \`$file' with the above command before installing it" -+ $opt_dry_run || ${RM}r "$tmpdir" -+ continue -+ fi -+ file="$outputname" -+ else -+ func_warning "cannot relink \`$file'" -+ fi -+ } -+ else -+ # Install the binary that we compiled earlier. -+ file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` -+ fi -+ fi -+ -+ # remove .exe since cygwin /usr/bin/install will append another -+ # one anyway -+ case $install_prog,$host in -+ */usr/bin/install*,*cygwin*) -+ case $file:$destfile in -+ *.exe:*.exe) -+ # this is ok -+ ;; -+ *.exe:*) -+ destfile=$destfile.exe -+ ;; -+ *:*.exe) -+ func_stripname '' '.exe' "$destfile" -+ destfile=$func_stripname_result -+ ;; -+ esac -+ ;; -+ esac -+ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' -+ $opt_dry_run || if test -n "$outputname"; then -+ ${RM}r "$tmpdir" -+ fi -+ ;; -+ esac -+ done -+ -+ for file in $staticlibs; do -+ func_basename "$file" -+ name="$func_basename_result" -+ -+ # Set up the ranlib parameters. -+ oldlib="$destdir/$name" -+ -+ func_show_eval "$install_prog \$file \$oldlib" 'exit $?' -+ -+ if test -n "$stripme" && test -n "$old_striplib"; then -+ func_show_eval "$old_striplib $oldlib" 'exit $?' -+ fi -+ -+ # Do each command in the postinstall commands. -+ func_execute_cmds "$old_postinstall_cmds" 'exit $?' -+ done -+ -+ test -n "$future_libdirs" && \ -+ func_warning "remember to run \`$progname --finish$future_libdirs'" -+ -+ if test -n "$current_libdirs"; then -+ # Maybe just do a dry run. -+ $opt_dry_run && current_libdirs=" -n$current_libdirs" -+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' -+ else -+ exit $EXIT_SUCCESS -+ fi -+} -+ -+test "$opt_mode" = install && func_mode_install ${1+"$@"} -+ -+ -+# func_generate_dlsyms outputname originator pic_p -+# Extract symbols from dlprefiles and create ${outputname}S.o with -+# a dlpreopen symbol table. -+func_generate_dlsyms () -+{ -+ $opt_debug -+ my_outputname="$1" -+ my_originator="$2" -+ my_pic_p="${3-no}" -+ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` -+ my_dlsyms= -+ -+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -+ if test -n "$NM" && test -n "$global_symbol_pipe"; then -+ my_dlsyms="${my_outputname}S.c" -+ else -+ func_error "not configured to extract global symbols from dlpreopened files" -+ fi -+ fi -+ -+ if test -n "$my_dlsyms"; then -+ case $my_dlsyms in -+ "") ;; -+ *.c) -+ # Discover the nlist of each of the dlfiles. -+ nlist="$output_objdir/${my_outputname}.nm" -+ -+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T" -+ -+ # Parse the name list into a source file. -+ func_verbose "creating $output_objdir/$my_dlsyms" -+ -+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ -+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ -+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ -+ -+#ifdef __cplusplus -+extern \"C\" { -+#endif -+ -+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) -+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" -+#endif -+ -+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -+/* DATA imports from DLLs on WIN32 con't be const, because runtime -+ relocations are performed -- see ld's documentation on pseudo-relocs. */ -+# define LT_DLSYM_CONST -+#elif defined(__osf__) -+/* This system does not cope well with relocations in const data. */ -+# define LT_DLSYM_CONST -+#else -+# define LT_DLSYM_CONST const -+#endif -+ -+/* External symbol declarations for the compiler. */\ -+" -+ -+ if test "$dlself" = yes; then -+ func_verbose "generating symbol list for \`$output'" -+ -+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" -+ -+ # Add our own program objects to the symbol list. -+ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` -+ for progfile in $progfiles; do -+ func_to_tool_file "$progfile" func_convert_file_msys_to_w32 -+ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" -+ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" -+ done -+ -+ if test -n "$exclude_expsyms"; then -+ $opt_dry_run || { -+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' -+ eval '$MV "$nlist"T "$nlist"' -+ } -+ fi -+ -+ if test -n "$export_symbols_regex"; then -+ $opt_dry_run || { -+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' -+ eval '$MV "$nlist"T "$nlist"' -+ } -+ fi -+ -+ # Prepare the list of exported symbols -+ if test -z "$export_symbols"; then -+ export_symbols="$output_objdir/$outputname.exp" -+ $opt_dry_run || { -+ $RM $export_symbols -+ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' -+ case $host in -+ *cygwin* | *mingw* | *cegcc* ) -+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' -+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' -+ ;; -+ esac -+ } -+ else -+ $opt_dry_run || { -+ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' -+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' -+ eval '$MV "$nlist"T "$nlist"' -+ case $host in -+ *cygwin* | *mingw* | *cegcc* ) -+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' -+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' -+ ;; -+ esac -+ } -+ fi -+ fi -+ -+ for dlprefile in $dlprefiles; do -+ func_verbose "extracting global C symbols from \`$dlprefile'" -+ func_basename "$dlprefile" -+ name="$func_basename_result" -+ case $host in -+ *cygwin* | *mingw* | *cegcc* ) -+ # if an import library, we need to obtain dlname -+ if func_win32_import_lib_p "$dlprefile"; then -+ func_tr_sh "$dlprefile" -+ eval "curr_lafile=\$libfile_$func_tr_sh_result" -+ dlprefile_dlbasename="" -+ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then -+ # Use subshell, to avoid clobbering current variable values -+ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` -+ if test -n "$dlprefile_dlname" ; then -+ func_basename "$dlprefile_dlname" -+ dlprefile_dlbasename="$func_basename_result" -+ else -+ # no lafile. user explicitly requested -dlpreopen <import library>. -+ $sharedlib_from_linklib_cmd "$dlprefile" -+ dlprefile_dlbasename=$sharedlib_from_linklib_result -+ fi -+ fi -+ $opt_dry_run || { -+ if test -n "$dlprefile_dlbasename" ; then -+ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' -+ else -+ func_warning "Could not compute DLL name from $name" -+ eval '$ECHO ": $name " >> "$nlist"' -+ fi -+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 -+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | -+ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" -+ } -+ else # not an import lib -+ $opt_dry_run || { -+ eval '$ECHO ": $name " >> "$nlist"' -+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 -+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" -+ } -+ fi -+ ;; -+ *) -+ $opt_dry_run || { -+ eval '$ECHO ": $name " >> "$nlist"' -+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 -+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" -+ } -+ ;; -+ esac -+ done -+ -+ $opt_dry_run || { -+ # Make sure we have at least an empty file. -+ test -f "$nlist" || : > "$nlist" -+ -+ if test -n "$exclude_expsyms"; then -+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T -+ $MV "$nlist"T "$nlist" -+ fi -+ -+ # Try sorting and uniquifying the output. -+ if $GREP -v "^: " < "$nlist" | -+ if sort -k 3 </dev/null >/dev/null 2>&1; then -+ sort -k 3 -+ else -+ sort +2 -+ fi | -+ uniq > "$nlist"S; then -+ : -+ else -+ $GREP -v "^: " < "$nlist" > "$nlist"S -+ fi -+ -+ if test -f "$nlist"S; then -+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' -+ else -+ echo '/* NONE */' >> "$output_objdir/$my_dlsyms" -+ fi -+ -+ echo >> "$output_objdir/$my_dlsyms" "\ -+ -+/* The mapping between symbol names and symbols. */ -+typedef struct { -+ const char *name; -+ void *address; -+} lt_dlsymlist; -+extern LT_DLSYM_CONST lt_dlsymlist -+lt_${my_prefix}_LTX_preloaded_symbols[]; -+LT_DLSYM_CONST lt_dlsymlist -+lt_${my_prefix}_LTX_preloaded_symbols[] = -+{\ -+ { \"$my_originator\", (void *) 0 }," -+ -+ case $need_lib_prefix in -+ no) -+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" -+ ;; -+ *) -+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" -+ ;; -+ esac -+ echo >> "$output_objdir/$my_dlsyms" "\ -+ {0, (void *) 0} -+}; -+ -+/* This works around a problem in FreeBSD linker */ -+#ifdef FREEBSD_WORKAROUND -+static const void *lt_preloaded_setup() { -+ return lt_${my_prefix}_LTX_preloaded_symbols; -+} -+#endif -+ -+#ifdef __cplusplus -+} -+#endif\ -+" -+ } # !$opt_dry_run -+ -+ pic_flag_for_symtable= -+ case "$compile_command " in -+ *" -static "*) ;; -+ *) -+ case $host in -+ # compiling the symbol table file with pic_flag works around -+ # a FreeBSD bug that causes programs to crash when -lm is -+ # linked before any other PIC object. But we must not use -+ # pic_flag when linking with -static. The problem exists in -+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. -+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) -+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; -+ *-*-hpux*) -+ pic_flag_for_symtable=" $pic_flag" ;; -+ *) -+ if test "X$my_pic_p" != Xno; then -+ pic_flag_for_symtable=" $pic_flag" -+ fi -+ ;; -+ esac -+ ;; -+ esac -+ symtab_cflags= -+ for arg in $LTCFLAGS; do -+ case $arg in -+ -pie | -fpie | -fPIE) ;; -+ *) func_append symtab_cflags " $arg" ;; -+ esac -+ done -+ -+ # Now compile the dynamic symbol file. -+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' -+ -+ # Clean up the generated files. -+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' -+ -+ # Transform the symbol file into the correct name. -+ symfileobj="$output_objdir/${my_outputname}S.$objext" -+ case $host in -+ *cygwin* | *mingw* | *cegcc* ) -+ if test -f "$output_objdir/$my_outputname.def"; then -+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` -+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` -+ else -+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` -+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` -+ fi -+ ;; -+ *) -+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` -+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` -+ ;; -+ esac -+ ;; -+ *) -+ func_fatal_error "unknown suffix for \`$my_dlsyms'" -+ ;; -+ esac -+ else -+ # We keep going just in case the user didn't refer to -+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe -+ # really was required. -+ -+ # Nullify the symbol file. -+ compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` -+ finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` -+ fi -+} -+ -+# func_win32_libid arg -+# return the library type of file 'arg' -+# -+# Need a lot of goo to handle *both* DLLs and import libs -+# Has to be a shell function in order to 'eat' the argument -+# that is supplied when $file_magic_command is called. -+# Despite the name, also deal with 64 bit binaries. -+func_win32_libid () -+{ -+ $opt_debug -+ win32_libid_type="unknown" -+ win32_fileres=`file -L $1 2>/dev/null` -+ case $win32_fileres in -+ *ar\ archive\ import\ library*) # definitely import -+ win32_libid_type="x86 archive import" -+ ;; -+ *ar\ archive*) # could be an import, or static -+ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. -+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | -+ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then -+ func_to_tool_file "$1" func_convert_file_msys_to_w32 -+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | -+ $SED -n -e ' -+ 1,100{ -+ / I /{ -+ s,.*,import, -+ p -+ q -+ } -+ }'` -+ case $win32_nmres in -+ import*) win32_libid_type="x86 archive import";; -+ *) win32_libid_type="x86 archive static";; -+ esac -+ fi -+ ;; -+ *DLL*) -+ win32_libid_type="x86 DLL" -+ ;; -+ *executable*) # but shell scripts are "executable" too... -+ case $win32_fileres in -+ *MS\ Windows\ PE\ Intel*) -+ win32_libid_type="x86 DLL" -+ ;; -+ esac -+ ;; -+ esac -+ $ECHO "$win32_libid_type" -+} -+ -+# func_cygming_dll_for_implib ARG -+# -+# Platform-specific function to extract the -+# name of the DLL associated with the specified -+# import library ARG. -+# Invoked by eval'ing the libtool variable -+# $sharedlib_from_linklib_cmd -+# Result is available in the variable -+# $sharedlib_from_linklib_result -+func_cygming_dll_for_implib () -+{ -+ $opt_debug -+ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` -+} -+ -+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs -+# -+# The is the core of a fallback implementation of a -+# platform-specific function to extract the name of the -+# DLL associated with the specified import library LIBNAME. -+# -+# SECTION_NAME is either .idata$6 or .idata$7, depending -+# on the platform and compiler that created the implib. -+# -+# Echos the name of the DLL associated with the -+# specified import library. -+func_cygming_dll_for_implib_fallback_core () -+{ -+ $opt_debug -+ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` -+ $OBJDUMP -s --section "$1" "$2" 2>/dev/null | -+ $SED '/^Contents of section '"$match_literal"':/{ -+ # Place marker at beginning of archive member dllname section -+ s/.*/====MARK====/ -+ p -+ d -+ } -+ # These lines can sometimes be longer than 43 characters, but -+ # are always uninteresting -+ /:[ ]*file format pe[i]\{,1\}-/d -+ /^In archive [^:]*:/d -+ # Ensure marker is printed -+ /^====MARK====/p -+ # Remove all lines with less than 43 characters -+ /^.\{43\}/!d -+ # From remaining lines, remove first 43 characters -+ s/^.\{43\}//' | -+ $SED -n ' -+ # Join marker and all lines until next marker into a single line -+ /^====MARK====/ b para -+ H -+ $ b para -+ b -+ :para -+ x -+ s/\n//g -+ # Remove the marker -+ s/^====MARK====// -+ # Remove trailing dots and whitespace -+ s/[\. \t]*$// -+ # Print -+ /./p' | -+ # we now have a list, one entry per line, of the stringified -+ # contents of the appropriate section of all members of the -+ # archive which possess that section. Heuristic: eliminate -+ # all those which have a first or second character that is -+ # a '.' (that is, objdump's representation of an unprintable -+ # character.) This should work for all archives with less than -+ # 0x302f exports -- but will fail for DLLs whose name actually -+ # begins with a literal '.' or a single character followed by -+ # a '.'. -+ # -+ # Of those that remain, print the first one. -+ $SED -e '/^\./d;/^.\./d;q' -+} -+ -+# func_cygming_gnu_implib_p ARG -+# This predicate returns with zero status (TRUE) if -+# ARG is a GNU/binutils-style import library. Returns -+# with nonzero status (FALSE) otherwise. -+func_cygming_gnu_implib_p () -+{ -+ $opt_debug -+ func_to_tool_file "$1" func_convert_file_msys_to_w32 -+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` -+ test -n "$func_cygming_gnu_implib_tmp" -+} -+ -+# func_cygming_ms_implib_p ARG -+# This predicate returns with zero status (TRUE) if -+# ARG is an MS-style import library. Returns -+# with nonzero status (FALSE) otherwise. -+func_cygming_ms_implib_p () -+{ -+ $opt_debug -+ func_to_tool_file "$1" func_convert_file_msys_to_w32 -+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` -+ test -n "$func_cygming_ms_implib_tmp" -+} -+ -+# func_cygming_dll_for_implib_fallback ARG -+# Platform-specific function to extract the -+# name of the DLL associated with the specified -+# import library ARG. -+# -+# This fallback implementation is for use when $DLLTOOL -+# does not support the --identify-strict option. -+# Invoked by eval'ing the libtool variable -+# $sharedlib_from_linklib_cmd -+# Result is available in the variable -+# $sharedlib_from_linklib_result -+func_cygming_dll_for_implib_fallback () -+{ -+ $opt_debug -+ if func_cygming_gnu_implib_p "$1" ; then -+ # binutils import library -+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` -+ elif func_cygming_ms_implib_p "$1" ; then -+ # ms-generated import library -+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` -+ else -+ # unknown -+ sharedlib_from_linklib_result="" -+ fi -+} -+ -+ -+# func_extract_an_archive dir oldlib -+func_extract_an_archive () -+{ -+ $opt_debug -+ f_ex_an_ar_dir="$1"; shift -+ f_ex_an_ar_oldlib="$1" -+ if test "$lock_old_archive_extraction" = yes; then -+ lockfile=$f_ex_an_ar_oldlib.lock -+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do -+ func_echo "Waiting for $lockfile to be removed" -+ sleep 2 -+ done -+ fi -+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ -+ 'stat=$?; rm -f "$lockfile"; exit $stat' -+ if test "$lock_old_archive_extraction" = yes; then -+ $opt_dry_run || rm -f "$lockfile" -+ fi -+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then -+ : -+ else -+ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" -+ fi -+} -+ -+ -+# func_extract_archives gentop oldlib ... -+func_extract_archives () -+{ -+ $opt_debug -+ my_gentop="$1"; shift -+ my_oldlibs=${1+"$@"} -+ my_oldobjs="" -+ my_xlib="" -+ my_xabs="" -+ my_xdir="" -+ -+ for my_xlib in $my_oldlibs; do -+ # Extract the objects. -+ case $my_xlib in -+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; -+ *) my_xabs=`pwd`"/$my_xlib" ;; -+ esac -+ func_basename "$my_xlib" -+ my_xlib="$func_basename_result" -+ my_xlib_u=$my_xlib -+ while :; do -+ case " $extracted_archives " in -+ *" $my_xlib_u "*) -+ func_arith $extracted_serial + 1 -+ extracted_serial=$func_arith_result -+ my_xlib_u=lt$extracted_serial-$my_xlib ;; -+ *) break ;; -+ esac -+ done -+ extracted_archives="$extracted_archives $my_xlib_u" -+ my_xdir="$my_gentop/$my_xlib_u" -+ -+ func_mkdir_p "$my_xdir" -+ -+ case $host in -+ *-darwin*) -+ func_verbose "Extracting $my_xabs" -+ # Do not bother doing anything if just a dry run -+ $opt_dry_run || { -+ darwin_orig_dir=`pwd` -+ cd $my_xdir || exit $? -+ darwin_archive=$my_xabs -+ darwin_curdir=`pwd` -+ darwin_base_archive=`basename "$darwin_archive"` -+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` -+ if test -n "$darwin_arches"; then -+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` -+ darwin_arch= -+ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" -+ for darwin_arch in $darwin_arches ; do -+ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" -+ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" -+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" -+ func_extract_an_archive "`pwd`" "${darwin_base_archive}" -+ cd "$darwin_curdir" -+ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" -+ done # $darwin_arches -+ ## Okay now we've a bunch of thin objects, gotta fatten them up :) -+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` -+ darwin_file= -+ darwin_files= -+ for darwin_file in $darwin_filelist; do -+ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` -+ $LIPO -create -output "$darwin_file" $darwin_files -+ done # $darwin_filelist -+ $RM -rf unfat-$$ -+ cd "$darwin_orig_dir" -+ else -+ cd $darwin_orig_dir -+ func_extract_an_archive "$my_xdir" "$my_xabs" -+ fi # $darwin_arches -+ } # !$opt_dry_run -+ ;; -+ *) -+ func_extract_an_archive "$my_xdir" "$my_xabs" -+ ;; -+ esac -+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` -+ done -+ -+ func_extract_archives_result="$my_oldobjs" -+} -+ -+ -+# func_emit_wrapper [arg=no] -+# -+# Emit a libtool wrapper script on stdout. -+# Don't directly open a file because we may want to -+# incorporate the script contents within a cygwin/mingw -+# wrapper executable. Must ONLY be called from within -+# func_mode_link because it depends on a number of variables -+# set therein. -+# -+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR -+# variable will take. If 'yes', then the emitted script -+# will assume that the directory in which it is stored is -+# the $objdir directory. This is a cygwin/mingw-specific -+# behavior. -+func_emit_wrapper () -+{ -+ func_emit_wrapper_arg1=${1-no} -+ -+ $ECHO "\ -+#! $SHELL -+ -+# $output - temporary wrapper script for $objdir/$outputname -+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -+# -+# The $output program cannot be directly executed until all the libtool -+# libraries that it depends on are installed. -+# -+# This wrapper script should never be moved out of the build directory. -+# If it is, it will not operate correctly. -+ -+# Sed substitution that helps us do robust quoting. It backslashifies -+# metacharacters that are still active within double-quoted strings. -+sed_quote_subst='$sed_quote_subst' -+ -+# Be Bourne compatible -+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '\${1+\"\$@\"}'='\"\$@\"' -+ setopt NO_GLOB_SUBST -+else -+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac -+fi -+BIN_SH=xpg4; export BIN_SH # for Tru64 -+DUALCASE=1; export DUALCASE # for MKS sh -+ -+# The HP-UX ksh and POSIX shell print the target directory to stdout -+# if CDPATH is set. -+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH -+ -+relink_command=\"$relink_command\" -+ -+# This environment variable determines our operation mode. -+if test \"\$libtool_install_magic\" = \"$magic\"; then -+ # install mode needs the following variables: -+ generated_by_libtool_version='$macro_version' -+ notinst_deplibs='$notinst_deplibs' -+else -+ # When we are sourced in execute mode, \$file and \$ECHO are already set. -+ if test \"\$libtool_execute_magic\" != \"$magic\"; then -+ file=\"\$0\"" -+ -+ qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` -+ $ECHO "\ -+ -+# A function that is used when there is no print builtin or printf. -+func_fallback_echo () -+{ -+ eval 'cat <<_LTECHO_EOF -+\$1 -+_LTECHO_EOF' -+} -+ ECHO=\"$qECHO\" -+ fi -+ -+# Very basic option parsing. These options are (a) specific to -+# the libtool wrapper, (b) are identical between the wrapper -+# /script/ and the wrapper /executable/ which is used only on -+# windows platforms, and (c) all begin with the string "--lt-" -+# (application programs are unlikely to have options which match -+# this pattern). -+# -+# There are only two supported options: --lt-debug and -+# --lt-dump-script. There is, deliberately, no --lt-help. -+# -+# The first argument to this parsing function should be the -+# script's $0 value, followed by "$@". -+lt_option_debug= -+func_parse_lt_options () -+{ -+ lt_script_arg0=\$0 -+ shift -+ for lt_opt -+ do -+ case \"\$lt_opt\" in -+ --lt-debug) lt_option_debug=1 ;; -+ --lt-dump-script) -+ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` -+ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. -+ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` -+ cat \"\$lt_dump_D/\$lt_dump_F\" -+ exit 0 -+ ;; -+ --lt-*) -+ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 -+ exit 1 -+ ;; -+ esac -+ done -+ -+ # Print the debug banner immediately: -+ if test -n \"\$lt_option_debug\"; then -+ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 -+ fi -+} -+ -+# Used when --lt-debug. Prints its arguments to stdout -+# (redirection is the responsibility of the caller) -+func_lt_dump_args () -+{ -+ lt_dump_args_N=1; -+ for lt_arg -+ do -+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" -+ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` -+ done -+} -+ -+# Core function for launching the target application -+func_exec_program_core () -+{ -+" -+ case $host in -+ # Backslashes separate directories on plain windows -+ *-*-mingw | *-*-os2* | *-cegcc*) -+ $ECHO "\ -+ if test -n \"\$lt_option_debug\"; then -+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 -+ func_lt_dump_args \${1+\"\$@\"} 1>&2 -+ fi -+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -+" -+ ;; -+ -+ *) -+ $ECHO "\ -+ if test -n \"\$lt_option_debug\"; then -+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 -+ func_lt_dump_args \${1+\"\$@\"} 1>&2 -+ fi -+ exec \"\$progdir/\$program\" \${1+\"\$@\"} -+" -+ ;; -+ esac -+ $ECHO "\ -+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 -+ exit 1 -+} -+ -+# A function to encapsulate launching the target application -+# Strips options in the --lt-* namespace from \$@ and -+# launches target application with the remaining arguments. -+func_exec_program () -+{ -+ for lt_wr_arg -+ do -+ case \$lt_wr_arg in -+ --lt-*) ;; -+ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; -+ esac -+ shift -+ done -+ func_exec_program_core \${1+\"\$@\"} -+} -+ -+ # Parse options -+ func_parse_lt_options \"\$0\" \${1+\"\$@\"} -+ -+ # Find the directory that this script lives in. -+ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` -+ test \"x\$thisdir\" = \"x\$file\" && thisdir=. -+ -+ # Follow symbolic links until we get to the real thisdir. -+ file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` -+ while test -n \"\$file\"; do -+ destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` -+ -+ # If there was a directory component, then change thisdir. -+ if test \"x\$destdir\" != \"x\$file\"; then -+ case \"\$destdir\" in -+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; -+ *) thisdir=\"\$thisdir/\$destdir\" ;; -+ esac -+ fi -+ -+ file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` -+ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` -+ done -+ -+ # Usually 'no', except on cygwin/mingw when embedded into -+ # the cwrapper. -+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 -+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then -+ # special case for '.' -+ if test \"\$thisdir\" = \".\"; then -+ thisdir=\`pwd\` -+ fi -+ # remove .libs from thisdir -+ case \"\$thisdir\" in -+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; -+ $objdir ) thisdir=. ;; -+ esac -+ fi -+ -+ # Try to get the absolute directory name. -+ absdir=\`cd \"\$thisdir\" && pwd\` -+ test -n \"\$absdir\" && thisdir=\"\$absdir\" -+" -+ -+ if test "$fast_install" = yes; then -+ $ECHO "\ -+ program=lt-'$outputname'$exeext -+ progdir=\"\$thisdir/$objdir\" -+ -+ if test ! -f \"\$progdir/\$program\" || -+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ -+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then -+ -+ file=\"\$\$-\$program\" -+ -+ if test ! -d \"\$progdir\"; then -+ $MKDIR \"\$progdir\" -+ else -+ $RM \"\$progdir/\$file\" -+ fi" -+ -+ $ECHO "\ -+ -+ # relink executable if necessary -+ if test -n \"\$relink_command\"; then -+ if relink_command_output=\`eval \$relink_command 2>&1\`; then : -+ else -+ $ECHO \"\$relink_command_output\" >&2 -+ $RM \"\$progdir/\$file\" -+ exit 1 -+ fi -+ fi -+ -+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || -+ { $RM \"\$progdir/\$program\"; -+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } -+ $RM \"\$progdir/\$file\" -+ fi" -+ else -+ $ECHO "\ -+ program='$outputname' -+ progdir=\"\$thisdir/$objdir\" -+" -+ fi -+ -+ $ECHO "\ -+ -+ if test -f \"\$progdir/\$program\"; then" -+ -+ # fixup the dll searchpath if we need to. -+ # -+ # Fix the DLL searchpath if we need to. Do this before prepending -+ # to shlibpath, because on Windows, both are PATH and uninstalled -+ # libraries must come first. -+ if test -n "$dllsearchpath"; then -+ $ECHO "\ -+ # Add the dll search path components to the executable PATH -+ PATH=$dllsearchpath:\$PATH -+" -+ fi -+ -+ # Export our shlibpath_var if we have one. -+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then -+ $ECHO "\ -+ # Add our own library path to $shlibpath_var -+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" -+ -+ # Some systems cannot cope with colon-terminated $shlibpath_var -+ # The second colon is a workaround for a bug in BeOS R4 sed -+ $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` -+ -+ export $shlibpath_var -+" -+ fi -+ -+ $ECHO "\ -+ if test \"\$libtool_execute_magic\" != \"$magic\"; then -+ # Run the actual program with our arguments. -+ func_exec_program \${1+\"\$@\"} -+ fi -+ else -+ # The program doesn't exist. -+ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 -+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 -+ \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 -+ exit 1 -+ fi -+fi\ -+" -+} -+ -+ -+# func_emit_cwrapperexe_src -+# emit the source code for a wrapper executable on stdout -+# Must ONLY be called from within func_mode_link because -+# it depends on a number of variable set therein. -+func_emit_cwrapperexe_src () -+{ -+ cat <<EOF -+ -+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname -+ Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -+ -+ The $output program cannot be directly executed until all the libtool -+ libraries that it depends on are installed. -+ -+ This wrapper executable should never be moved out of the build directory. -+ If it is, it will not operate correctly. -+*/ -+EOF -+ cat <<"EOF" -+#ifdef _MSC_VER -+# define _CRT_SECURE_NO_DEPRECATE 1 -+#endif -+#include <stdio.h> -+#include <stdlib.h> -+#ifdef _MSC_VER -+# include <direct.h> -+# include <process.h> -+# include <io.h> -+#else -+# include <unistd.h> -+# include <stdint.h> -+# ifdef __CYGWIN__ -+# include <io.h> -+# endif -+#endif -+#include <malloc.h> -+#include <stdarg.h> -+#include <assert.h> -+#include <string.h> -+#include <ctype.h> -+#include <errno.h> -+#include <fcntl.h> -+#include <sys/stat.h> -+ -+/* declarations of non-ANSI functions */ -+#if defined(__MINGW32__) -+# ifdef __STRICT_ANSI__ -+int _putenv (const char *); -+# endif -+#elif defined(__CYGWIN__) -+# ifdef __STRICT_ANSI__ -+char *realpath (const char *, char *); -+int putenv (char *); -+int setenv (const char *, const char *, int); -+# endif -+/* #elif defined (other platforms) ... */ -+#endif -+ -+/* portability defines, excluding path handling macros */ -+#if defined(_MSC_VER) -+# define setmode _setmode -+# define stat _stat -+# define chmod _chmod -+# define getcwd _getcwd -+# define putenv _putenv -+# define S_IXUSR _S_IEXEC -+# ifndef _INTPTR_T_DEFINED -+# define _INTPTR_T_DEFINED -+# define intptr_t int -+# endif -+#elif defined(__MINGW32__) -+# define setmode _setmode -+# define stat _stat -+# define chmod _chmod -+# define getcwd _getcwd -+# define putenv _putenv -+#elif defined(__CYGWIN__) -+# define HAVE_SETENV -+# define FOPEN_WB "wb" -+/* #elif defined (other platforms) ... */ -+#endif -+ -+#if defined(PATH_MAX) -+# define LT_PATHMAX PATH_MAX -+#elif defined(MAXPATHLEN) -+# define LT_PATHMAX MAXPATHLEN -+#else -+# define LT_PATHMAX 1024 -+#endif -+ -+#ifndef S_IXOTH -+# define S_IXOTH 0 -+#endif -+#ifndef S_IXGRP -+# define S_IXGRP 0 -+#endif -+ -+/* path handling portability macros */ -+#ifndef DIR_SEPARATOR -+# define DIR_SEPARATOR '/' -+# define PATH_SEPARATOR ':' -+#endif -+ -+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ -+ defined (__OS2__) -+# define HAVE_DOS_BASED_FILE_SYSTEM -+# define FOPEN_WB "wb" -+# ifndef DIR_SEPARATOR_2 -+# define DIR_SEPARATOR_2 '\\' -+# endif -+# ifndef PATH_SEPARATOR_2 -+# define PATH_SEPARATOR_2 ';' -+# endif -+#endif -+ -+#ifndef DIR_SEPARATOR_2 -+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) -+#else /* DIR_SEPARATOR_2 */ -+# define IS_DIR_SEPARATOR(ch) \ -+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -+#endif /* DIR_SEPARATOR_2 */ -+ -+#ifndef PATH_SEPARATOR_2 -+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) -+#else /* PATH_SEPARATOR_2 */ -+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) -+#endif /* PATH_SEPARATOR_2 */ -+ -+#ifndef FOPEN_WB -+# define FOPEN_WB "w" -+#endif -+#ifndef _O_BINARY -+# define _O_BINARY 0 -+#endif -+ -+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) -+#define XFREE(stale) do { \ -+ if (stale) { free ((void *) stale); stale = 0; } \ -+} while (0) -+ -+#if defined(LT_DEBUGWRAPPER) -+static int lt_debug = 1; -+#else -+static int lt_debug = 0; -+#endif -+ -+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ -+ -+void *xmalloc (size_t num); -+char *xstrdup (const char *string); -+const char *base_name (const char *name); -+char *find_executable (const char *wrapper); -+char *chase_symlinks (const char *pathspec); -+int make_executable (const char *path); -+int check_executable (const char *path); -+char *strendzap (char *str, const char *pat); -+void lt_debugprintf (const char *file, int line, const char *fmt, ...); -+void lt_fatal (const char *file, int line, const char *message, ...); -+static const char *nonnull (const char *s); -+static const char *nonempty (const char *s); -+void lt_setenv (const char *name, const char *value); -+char *lt_extend_str (const char *orig_value, const char *add, int to_end); -+void lt_update_exe_path (const char *name, const char *value); -+void lt_update_lib_path (const char *name, const char *value); -+char **prepare_spawn (char **argv); -+void lt_dump_script (FILE *f); -+EOF -+ -+ cat <<EOF -+volatile const char * MAGIC_EXE = "$magic_exe"; -+const char * LIB_PATH_VARNAME = "$shlibpath_var"; -+EOF -+ -+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then -+ func_to_host_path "$temp_rpath" -+ cat <<EOF -+const char * LIB_PATH_VALUE = "$func_to_host_path_result"; -+EOF -+ else -+ cat <<"EOF" -+const char * LIB_PATH_VALUE = ""; -+EOF -+ fi -+ -+ if test -n "$dllsearchpath"; then -+ func_to_host_path "$dllsearchpath:" -+ cat <<EOF -+const char * EXE_PATH_VARNAME = "PATH"; -+const char * EXE_PATH_VALUE = "$func_to_host_path_result"; -+EOF -+ else -+ cat <<"EOF" -+const char * EXE_PATH_VARNAME = ""; -+const char * EXE_PATH_VALUE = ""; -+EOF -+ fi -+ -+ if test "$fast_install" = yes; then -+ cat <<EOF -+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */ -+EOF -+ else -+ cat <<EOF -+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */ -+EOF -+ fi -+ -+ -+ cat <<"EOF" -+ -+#define LTWRAPPER_OPTION_PREFIX "--lt-" -+ -+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX; -+static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script"; -+static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug"; -+ -+int -+main (int argc, char *argv[]) -+{ -+ char **newargz; -+ int newargc; -+ char *tmp_pathspec; -+ char *actual_cwrapper_path; -+ char *actual_cwrapper_name; -+ char *target_name; -+ char *lt_argv_zero; -+ intptr_t rval = 127; -+ -+ int i; -+ -+ program_name = (char *) xstrdup (base_name (argv[0])); -+ newargz = XMALLOC (char *, argc + 1); -+ -+ /* very simple arg parsing; don't want to rely on getopt -+ * also, copy all non cwrapper options to newargz, except -+ * argz[0], which is handled differently -+ */ -+ newargc=0; -+ for (i = 1; i < argc; i++) -+ { -+ if (strcmp (argv[i], dumpscript_opt) == 0) -+ { -+EOF -+ case "$host" in -+ *mingw* | *cygwin* ) -+ # make stdout use "unix" line endings -+ echo " setmode(1,_O_BINARY);" -+ ;; -+ esac -+ -+ cat <<"EOF" -+ lt_dump_script (stdout); -+ return 0; -+ } -+ if (strcmp (argv[i], debug_opt) == 0) -+ { -+ lt_debug = 1; -+ continue; -+ } -+ if (strcmp (argv[i], ltwrapper_option_prefix) == 0) -+ { -+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX -+ namespace, but it is not one of the ones we know about and -+ have already dealt with, above (inluding dump-script), then -+ report an error. Otherwise, targets might begin to believe -+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX -+ namespace. The first time any user complains about this, we'll -+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option -+ or a configure.ac-settable value. -+ */ -+ lt_fatal (__FILE__, __LINE__, -+ "unrecognized %s option: '%s'", -+ ltwrapper_option_prefix, argv[i]); -+ } -+ /* otherwise ... */ -+ newargz[++newargc] = xstrdup (argv[i]); -+ } -+ newargz[++newargc] = NULL; -+ -+EOF -+ cat <<EOF -+ /* The GNU banner must be the first non-error debug message */ -+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n"); -+EOF -+ cat <<"EOF" -+ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]); -+ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name); -+ -+ tmp_pathspec = find_executable (argv[0]); -+ if (tmp_pathspec == NULL) -+ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]); -+ lt_debugprintf (__FILE__, __LINE__, -+ "(main) found exe (before symlink chase) at: %s\n", -+ tmp_pathspec); -+ -+ actual_cwrapper_path = chase_symlinks (tmp_pathspec); -+ lt_debugprintf (__FILE__, __LINE__, -+ "(main) found exe (after symlink chase) at: %s\n", -+ actual_cwrapper_path); -+ XFREE (tmp_pathspec); -+ -+ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path)); -+ strendzap (actual_cwrapper_path, actual_cwrapper_name); -+ -+ /* wrapper name transforms */ -+ strendzap (actual_cwrapper_name, ".exe"); -+ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1); -+ XFREE (actual_cwrapper_name); -+ actual_cwrapper_name = tmp_pathspec; -+ tmp_pathspec = 0; -+ -+ /* target_name transforms -- use actual target program name; might have lt- prefix */ -+ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME)); -+ strendzap (target_name, ".exe"); -+ tmp_pathspec = lt_extend_str (target_name, ".exe", 1); -+ XFREE (target_name); -+ target_name = tmp_pathspec; -+ tmp_pathspec = 0; -+ -+ lt_debugprintf (__FILE__, __LINE__, -+ "(main) libtool target name: %s\n", -+ target_name); -+EOF -+ -+ cat <<EOF -+ newargz[0] = -+ XMALLOC (char, (strlen (actual_cwrapper_path) + -+ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1)); -+ strcpy (newargz[0], actual_cwrapper_path); -+ strcat (newargz[0], "$objdir"); -+ strcat (newargz[0], "/"); -+EOF -+ -+ cat <<"EOF" -+ /* stop here, and copy so we don't have to do this twice */ -+ tmp_pathspec = xstrdup (newargz[0]); -+ -+ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */ -+ strcat (newargz[0], actual_cwrapper_name); -+ -+ /* DO want the lt- prefix here if it exists, so use target_name */ -+ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1); -+ XFREE (tmp_pathspec); -+ tmp_pathspec = NULL; -+EOF -+ -+ case $host_os in -+ mingw*) -+ cat <<"EOF" -+ { -+ char* p; -+ while ((p = strchr (newargz[0], '\\')) != NULL) -+ { -+ *p = '/'; -+ } -+ while ((p = strchr (lt_argv_zero, '\\')) != NULL) -+ { -+ *p = '/'; -+ } -+ } -+EOF -+ ;; -+ esac -+ -+ cat <<"EOF" -+ XFREE (target_name); -+ XFREE (actual_cwrapper_path); -+ XFREE (actual_cwrapper_name); -+ -+ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */ -+ lt_setenv ("DUALCASE", "1"); /* for MSK sh */ -+ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must -+ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath) -+ because on Windows, both *_VARNAMEs are PATH but uninstalled -+ libraries must come first. */ -+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE); -+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE); -+ -+ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n", -+ nonnull (lt_argv_zero)); -+ for (i = 0; i < newargc; i++) -+ { -+ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n", -+ i, nonnull (newargz[i])); -+ } -+ -+EOF -+ -+ case $host_os in -+ mingw*) -+ cat <<"EOF" -+ /* execv doesn't actually work on mingw as expected on unix */ -+ newargz = prepare_spawn (newargz); -+ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); -+ if (rval == -1) -+ { -+ /* failed to start process */ -+ lt_debugprintf (__FILE__, __LINE__, -+ "(main) failed to launch target \"%s\": %s\n", -+ lt_argv_zero, nonnull (strerror (errno))); -+ return 127; -+ } -+ return rval; -+EOF -+ ;; -+ *) -+ cat <<"EOF" -+ execv (lt_argv_zero, newargz); -+ return rval; /* =127, but avoids unused variable warning */ -+EOF -+ ;; -+ esac -+ -+ cat <<"EOF" -+} -+ -+void * -+xmalloc (size_t num) -+{ -+ void *p = (void *) malloc (num); -+ if (!p) -+ lt_fatal (__FILE__, __LINE__, "memory exhausted"); -+ -+ return p; -+} -+ -+char * -+xstrdup (const char *string) -+{ -+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1), -+ string) : NULL; -+} -+ -+const char * -+base_name (const char *name) -+{ -+ const char *base; -+ -+#if defined (HAVE_DOS_BASED_FILE_SYSTEM) -+ /* Skip over the disk name in MSDOS pathnames. */ -+ if (isalpha ((unsigned char) name[0]) && name[1] == ':') -+ name += 2; -+#endif -+ -+ for (base = name; *name; name++) -+ if (IS_DIR_SEPARATOR (*name)) -+ base = name + 1; -+ return base; -+} -+ -+int -+check_executable (const char *path) -+{ -+ struct stat st; -+ -+ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n", -+ nonempty (path)); -+ if ((!path) || (!*path)) -+ return 0; -+ -+ if ((stat (path, &st) >= 0) -+ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) -+ return 1; -+ else -+ return 0; -+} -+ -+int -+make_executable (const char *path) -+{ -+ int rval = 0; -+ struct stat st; -+ -+ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", -+ nonempty (path)); -+ if ((!path) || (!*path)) -+ return 0; -+ -+ if (stat (path, &st) >= 0) -+ { -+ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); -+ } -+ return rval; -+} -+ -+/* Searches for the full path of the wrapper. Returns -+ newly allocated full path name if found, NULL otherwise -+ Does not chase symlinks, even on platforms that support them. -+*/ -+char * -+find_executable (const char *wrapper) -+{ -+ int has_slash = 0; -+ const char *p; -+ const char *p_next; -+ /* static buffer for getcwd */ -+ char tmp[LT_PATHMAX + 1]; -+ int tmp_len; -+ char *concat_name; -+ -+ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", -+ nonempty (wrapper)); -+ -+ if ((wrapper == NULL) || (*wrapper == '\0')) -+ return NULL; -+ -+ /* Absolute path? */ -+#if defined (HAVE_DOS_BASED_FILE_SYSTEM) -+ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') -+ { -+ concat_name = xstrdup (wrapper); -+ if (check_executable (concat_name)) -+ return concat_name; -+ XFREE (concat_name); -+ } -+ else -+ { -+#endif -+ if (IS_DIR_SEPARATOR (wrapper[0])) -+ { -+ concat_name = xstrdup (wrapper); -+ if (check_executable (concat_name)) -+ return concat_name; -+ XFREE (concat_name); -+ } -+#if defined (HAVE_DOS_BASED_FILE_SYSTEM) -+ } -+#endif -+ -+ for (p = wrapper; *p; p++) -+ if (*p == '/') -+ { -+ has_slash = 1; -+ break; -+ } -+ if (!has_slash) -+ { -+ /* no slashes; search PATH */ -+ const char *path = getenv ("PATH"); -+ if (path != NULL) -+ { -+ for (p = path; *p; p = p_next) -+ { -+ const char *q; -+ size_t p_len; -+ for (q = p; *q; q++) -+ if (IS_PATH_SEPARATOR (*q)) -+ break; -+ p_len = q - p; -+ p_next = (*q == '\0' ? q : q + 1); -+ if (p_len == 0) -+ { -+ /* empty path: current directory */ -+ if (getcwd (tmp, LT_PATHMAX) == NULL) -+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", -+ nonnull (strerror (errno))); -+ tmp_len = strlen (tmp); -+ concat_name = -+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); -+ memcpy (concat_name, tmp, tmp_len); -+ concat_name[tmp_len] = '/'; -+ strcpy (concat_name + tmp_len + 1, wrapper); -+ } -+ else -+ { -+ concat_name = -+ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); -+ memcpy (concat_name, p, p_len); -+ concat_name[p_len] = '/'; -+ strcpy (concat_name + p_len + 1, wrapper); -+ } -+ if (check_executable (concat_name)) -+ return concat_name; -+ XFREE (concat_name); -+ } -+ } -+ /* not found in PATH; assume curdir */ -+ } -+ /* Relative path | not found in path: prepend cwd */ -+ if (getcwd (tmp, LT_PATHMAX) == NULL) -+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", -+ nonnull (strerror (errno))); -+ tmp_len = strlen (tmp); -+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); -+ memcpy (concat_name, tmp, tmp_len); -+ concat_name[tmp_len] = '/'; -+ strcpy (concat_name + tmp_len + 1, wrapper); -+ -+ if (check_executable (concat_name)) -+ return concat_name; -+ XFREE (concat_name); -+ return NULL; -+} -+ -+char * -+chase_symlinks (const char *pathspec) -+{ -+#ifndef S_ISLNK -+ return xstrdup (pathspec); -+#else -+ char buf[LT_PATHMAX]; -+ struct stat s; -+ char *tmp_pathspec = xstrdup (pathspec); -+ char *p; -+ int has_symlinks = 0; -+ while (strlen (tmp_pathspec) && !has_symlinks) -+ { -+ lt_debugprintf (__FILE__, __LINE__, -+ "checking path component for symlinks: %s\n", -+ tmp_pathspec); -+ if (lstat (tmp_pathspec, &s) == 0) -+ { -+ if (S_ISLNK (s.st_mode) != 0) -+ { -+ has_symlinks = 1; -+ break; -+ } -+ -+ /* search backwards for last DIR_SEPARATOR */ -+ p = tmp_pathspec + strlen (tmp_pathspec) - 1; -+ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) -+ p--; -+ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) -+ { -+ /* no more DIR_SEPARATORS left */ -+ break; -+ } -+ *p = '\0'; -+ } -+ else -+ { -+ lt_fatal (__FILE__, __LINE__, -+ "error accessing file \"%s\": %s", -+ tmp_pathspec, nonnull (strerror (errno))); -+ } -+ } -+ XFREE (tmp_pathspec); -+ -+ if (!has_symlinks) -+ { -+ return xstrdup (pathspec); -+ } -+ -+ tmp_pathspec = realpath (pathspec, buf); -+ if (tmp_pathspec == 0) -+ { -+ lt_fatal (__FILE__, __LINE__, -+ "could not follow symlinks for %s", pathspec); -+ } -+ return xstrdup (tmp_pathspec); -+#endif -+} -+ -+char * -+strendzap (char *str, const char *pat) -+{ -+ size_t len, patlen; -+ -+ assert (str != NULL); -+ assert (pat != NULL); -+ -+ len = strlen (str); -+ patlen = strlen (pat); -+ -+ if (patlen <= len) -+ { -+ str += len - patlen; -+ if (strcmp (str, pat) == 0) -+ *str = '\0'; -+ } -+ return str; -+} -+ -+void -+lt_debugprintf (const char *file, int line, const char *fmt, ...) -+{ -+ va_list args; -+ if (lt_debug) -+ { -+ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); -+ va_start (args, fmt); -+ (void) vfprintf (stderr, fmt, args); -+ va_end (args); -+ } -+} -+ -+static void -+lt_error_core (int exit_status, const char *file, -+ int line, const char *mode, -+ const char *message, va_list ap) -+{ -+ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); -+ vfprintf (stderr, message, ap); -+ fprintf (stderr, ".\n"); -+ -+ if (exit_status >= 0) -+ exit (exit_status); -+} -+ -+void -+lt_fatal (const char *file, int line, const char *message, ...) -+{ -+ va_list ap; -+ va_start (ap, message); -+ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); -+ va_end (ap); -+} -+ -+static const char * -+nonnull (const char *s) -+{ -+ return s ? s : "(null)"; -+} -+ -+static const char * -+nonempty (const char *s) -+{ -+ return (s && !*s) ? "(empty)" : nonnull (s); -+} -+ -+void -+lt_setenv (const char *name, const char *value) -+{ -+ lt_debugprintf (__FILE__, __LINE__, -+ "(lt_setenv) setting '%s' to '%s'\n", -+ nonnull (name), nonnull (value)); -+ { -+#ifdef HAVE_SETENV -+ /* always make a copy, for consistency with !HAVE_SETENV */ -+ char *str = xstrdup (value); -+ setenv (name, str, 1); -+#else -+ int len = strlen (name) + 1 + strlen (value) + 1; -+ char *str = XMALLOC (char, len); -+ sprintf (str, "%s=%s", name, value); -+ if (putenv (str) != EXIT_SUCCESS) -+ { -+ XFREE (str); -+ } -+#endif -+ } -+} -+ -+char * -+lt_extend_str (const char *orig_value, const char *add, int to_end) -+{ -+ char *new_value; -+ if (orig_value && *orig_value) -+ { -+ int orig_value_len = strlen (orig_value); -+ int add_len = strlen (add); -+ new_value = XMALLOC (char, add_len + orig_value_len + 1); -+ if (to_end) -+ { -+ strcpy (new_value, orig_value); -+ strcpy (new_value + orig_value_len, add); -+ } -+ else -+ { -+ strcpy (new_value, add); -+ strcpy (new_value + add_len, orig_value); -+ } -+ } -+ else -+ { -+ new_value = xstrdup (add); -+ } -+ return new_value; -+} -+ -+void -+lt_update_exe_path (const char *name, const char *value) -+{ -+ lt_debugprintf (__FILE__, __LINE__, -+ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", -+ nonnull (name), nonnull (value)); -+ -+ if (name && *name && value && *value) -+ { -+ char *new_value = lt_extend_str (getenv (name), value, 0); -+ /* some systems can't cope with a ':'-terminated path #' */ -+ int len = strlen (new_value); -+ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) -+ { -+ new_value[len-1] = '\0'; -+ } -+ lt_setenv (name, new_value); -+ XFREE (new_value); -+ } -+} -+ -+void -+lt_update_lib_path (const char *name, const char *value) -+{ -+ lt_debugprintf (__FILE__, __LINE__, -+ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", -+ nonnull (name), nonnull (value)); -+ -+ if (name && *name && value && *value) -+ { -+ char *new_value = lt_extend_str (getenv (name), value, 0); -+ lt_setenv (name, new_value); -+ XFREE (new_value); -+ } -+} -+ -+EOF -+ case $host_os in -+ mingw*) -+ cat <<"EOF" -+ -+/* Prepares an argument vector before calling spawn(). -+ Note that spawn() does not by itself call the command interpreter -+ (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : -+ ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); -+ GetVersionEx(&v); -+ v.dwPlatformId == VER_PLATFORM_WIN32_NT; -+ }) ? "cmd.exe" : "command.com"). -+ Instead it simply concatenates the arguments, separated by ' ', and calls -+ CreateProcess(). We must quote the arguments since Win32 CreateProcess() -+ interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a -+ special way: -+ - Space and tab are interpreted as delimiters. They are not treated as -+ delimiters if they are surrounded by double quotes: "...". -+ - Unescaped double quotes are removed from the input. Their only effect is -+ that within double quotes, space and tab are treated like normal -+ characters. -+ - Backslashes not followed by double quotes are not special. -+ - But 2*n+1 backslashes followed by a double quote become -+ n backslashes followed by a double quote (n >= 0): -+ \" -> " -+ \\\" -> \" -+ \\\\\" -> \\" -+ */ -+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" -+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" -+char ** -+prepare_spawn (char **argv) -+{ -+ size_t argc; -+ char **new_argv; -+ size_t i; -+ -+ /* Count number of arguments. */ -+ for (argc = 0; argv[argc] != NULL; argc++) -+ ; -+ -+ /* Allocate new argument vector. */ -+ new_argv = XMALLOC (char *, argc + 1); -+ -+ /* Put quoted arguments into the new argument vector. */ -+ for (i = 0; i < argc; i++) -+ { -+ const char *string = argv[i]; -+ -+ if (string[0] == '\0') -+ new_argv[i] = xstrdup ("\"\""); -+ else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) -+ { -+ int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); -+ size_t length; -+ unsigned int backslashes; -+ const char *s; -+ char *quoted_string; -+ char *p; -+ -+ length = 0; -+ backslashes = 0; -+ if (quote_around) -+ length++; -+ for (s = string; *s != '\0'; s++) -+ { -+ char c = *s; -+ if (c == '"') -+ length += backslashes + 1; -+ length++; -+ if (c == '\\') -+ backslashes++; -+ else -+ backslashes = 0; -+ } -+ if (quote_around) -+ length += backslashes + 1; -+ -+ quoted_string = XMALLOC (char, length + 1); -+ -+ p = quoted_string; -+ backslashes = 0; -+ if (quote_around) -+ *p++ = '"'; -+ for (s = string; *s != '\0'; s++) -+ { -+ char c = *s; -+ if (c == '"') -+ { -+ unsigned int j; -+ for (j = backslashes + 1; j > 0; j--) -+ *p++ = '\\'; -+ } -+ *p++ = c; -+ if (c == '\\') -+ backslashes++; -+ else -+ backslashes = 0; -+ } -+ if (quote_around) -+ { -+ unsigned int j; -+ for (j = backslashes; j > 0; j--) -+ *p++ = '\\'; -+ *p++ = '"'; -+ } -+ *p = '\0'; -+ -+ new_argv[i] = quoted_string; -+ } -+ else -+ new_argv[i] = (char *) string; -+ } -+ new_argv[argc] = NULL; -+ -+ return new_argv; -+} -+EOF -+ ;; -+ esac -+ -+ cat <<"EOF" -+void lt_dump_script (FILE* f) -+{ -+EOF -+ func_emit_wrapper yes | -+ $SED -e 's/\([\\"]\)/\\\1/g' \ -+ -e 's/^/ fputs ("/' -e 's/$/\\n", f);/' -+ -+ cat <<"EOF" -+} -+EOF -+} -+# end: func_emit_cwrapperexe_src -+ -+# func_win32_import_lib_p ARG -+# True if ARG is an import lib, as indicated by $file_magic_cmd -+func_win32_import_lib_p () -+{ -+ $opt_debug -+ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in -+ *import*) : ;; -+ *) false ;; -+ esac -+} -+ -+# func_mode_link arg... -+func_mode_link () -+{ -+ $opt_debug -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) -+ # It is impossible to link a dll without this setting, and -+ # we shouldn't force the makefile maintainer to figure out -+ # which system we are compiling for in order to pass an extra -+ # flag for every libtool invocation. -+ # allow_undefined=no -+ -+ # FIXME: Unfortunately, there are problems with the above when trying -+ # to make a dll which has undefined symbols, in which case not -+ # even a static library is built. For now, we need to specify -+ # -no-undefined on the libtool link line when we can be certain -+ # that all symbols are satisfied, otherwise we get a static library. -+ allow_undefined=yes -+ ;; -+ *) -+ allow_undefined=yes -+ ;; -+ esac -+ libtool_args=$nonopt -+ base_compile="$nonopt $@" -+ compile_command=$nonopt -+ finalize_command=$nonopt -+ -+ compile_rpath= -+ finalize_rpath= -+ compile_shlibpath= -+ finalize_shlibpath= -+ convenience= -+ old_convenience= -+ deplibs= -+ old_deplibs= -+ compiler_flags= -+ linker_flags= -+ dllsearchpath= -+ lib_search_path=`pwd` -+ inst_prefix_dir= -+ new_inherited_linker_flags= -+ -+ avoid_version=no -+ bindir= -+ dlfiles= -+ dlprefiles= -+ dlself=no -+ export_dynamic=no -+ export_symbols= -+ export_symbols_regex= -+ generated= -+ libobjs= -+ ltlibs= -+ module=no -+ no_install=no -+ objs= -+ non_pic_objects= -+ precious_files_regex= -+ prefer_static_libs=no -+ preload=no -+ prev= -+ prevarg= -+ release= -+ rpath= -+ xrpath= -+ perm_rpath= -+ temp_rpath= -+ thread_safe=no -+ vinfo= -+ vinfo_number=no -+ weak_libs= -+ single_module="${wl}-single_module" -+ func_infer_tag $base_compile -+ -+ # We need to know -static, to get the right output filenames. -+ for arg -+ do -+ case $arg in -+ -shared) -+ test "$build_libtool_libs" != yes && \ -+ func_fatal_configuration "can not build a shared library" -+ build_old_libs=no -+ break -+ ;; -+ -all-static | -static | -static-libtool-libs) -+ case $arg in -+ -all-static) -+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then -+ func_warning "complete static linking is impossible in this configuration" -+ fi -+ if test -n "$link_static_flag"; then -+ dlopen_self=$dlopen_self_static -+ fi -+ prefer_static_libs=yes -+ ;; -+ -static) -+ if test -z "$pic_flag" && test -n "$link_static_flag"; then -+ dlopen_self=$dlopen_self_static -+ fi -+ prefer_static_libs=built -+ ;; -+ -static-libtool-libs) -+ if test -z "$pic_flag" && test -n "$link_static_flag"; then -+ dlopen_self=$dlopen_self_static -+ fi -+ prefer_static_libs=yes -+ ;; -+ esac -+ build_libtool_libs=no -+ build_old_libs=yes -+ break -+ ;; -+ esac -+ done -+ -+ # See if our shared archives depend on static archives. -+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes -+ -+ # Go through the arguments, transforming them on the way. -+ while test "$#" -gt 0; do -+ arg="$1" -+ shift -+ func_quote_for_eval "$arg" -+ qarg=$func_quote_for_eval_unquoted_result -+ func_append libtool_args " $func_quote_for_eval_result" -+ -+ # If the previous option needs an argument, assign it. -+ if test -n "$prev"; then -+ case $prev in -+ output) -+ func_append compile_command " @OUTPUT@" -+ func_append finalize_command " @OUTPUT@" -+ ;; -+ esac -+ -+ case $prev in -+ bindir) -+ bindir="$arg" -+ prev= -+ continue -+ ;; -+ dlfiles|dlprefiles) -+ if test "$preload" = no; then -+ # Add the symbol object into the linking commands. -+ func_append compile_command " @SYMFILE@" -+ func_append finalize_command " @SYMFILE@" -+ preload=yes -+ fi -+ case $arg in -+ *.la | *.lo) ;; # We handle these cases below. -+ force) -+ if test "$dlself" = no; then -+ dlself=needless -+ export_dynamic=yes -+ fi -+ prev= -+ continue -+ ;; -+ self) -+ if test "$prev" = dlprefiles; then -+ dlself=yes -+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then -+ dlself=yes -+ else -+ dlself=needless -+ export_dynamic=yes -+ fi -+ prev= -+ continue -+ ;; -+ *) -+ if test "$prev" = dlfiles; then -+ func_append dlfiles " $arg" -+ else -+ func_append dlprefiles " $arg" -+ fi -+ prev= -+ continue -+ ;; -+ esac -+ ;; -+ expsyms) -+ export_symbols="$arg" -+ test -f "$arg" \ -+ || func_fatal_error "symbol file \`$arg' does not exist" -+ prev= -+ continue -+ ;; -+ expsyms_regex) -+ export_symbols_regex="$arg" -+ prev= -+ continue -+ ;; -+ framework) -+ case $host in -+ *-*-darwin*) -+ case "$deplibs " in -+ *" $qarg.ltframework "*) ;; -+ *) func_append deplibs " $qarg.ltframework" # this is fixed later -+ ;; -+ esac -+ ;; -+ esac -+ prev= -+ continue -+ ;; -+ inst_prefix) -+ inst_prefix_dir="$arg" -+ prev= -+ continue -+ ;; -+ objectlist) -+ if test -f "$arg"; then -+ save_arg=$arg -+ moreargs= -+ for fil in `cat "$save_arg"` -+ do -+# func_append moreargs " $fil" -+ arg=$fil -+ # A libtool-controlled object. -+ -+ # Check to see that this really is a libtool object. -+ if func_lalib_unsafe_p "$arg"; then -+ pic_object= -+ non_pic_object= -+ -+ # Read the .lo file -+ func_source "$arg" -+ -+ if test -z "$pic_object" || -+ test -z "$non_pic_object" || -+ test "$pic_object" = none && -+ test "$non_pic_object" = none; then -+ func_fatal_error "cannot find name of object for \`$arg'" -+ fi -+ -+ # Extract subdirectory from the argument. -+ func_dirname "$arg" "/" "" -+ xdir="$func_dirname_result" -+ -+ if test "$pic_object" != none; then -+ # Prepend the subdirectory the object is found in. -+ pic_object="$xdir$pic_object" -+ -+ if test "$prev" = dlfiles; then -+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then -+ func_append dlfiles " $pic_object" -+ prev= -+ continue -+ else -+ # If libtool objects are unsupported, then we need to preload. -+ prev=dlprefiles -+ fi -+ fi -+ -+ # CHECK ME: I think I busted this. -Ossama -+ if test "$prev" = dlprefiles; then -+ # Preload the old-style object. -+ func_append dlprefiles " $pic_object" -+ prev= -+ fi -+ -+ # A PIC object. -+ func_append libobjs " $pic_object" -+ arg="$pic_object" -+ fi -+ -+ # Non-PIC object. -+ if test "$non_pic_object" != none; then -+ # Prepend the subdirectory the object is found in. -+ non_pic_object="$xdir$non_pic_object" -+ -+ # A standard non-PIC object -+ func_append non_pic_objects " $non_pic_object" -+ if test -z "$pic_object" || test "$pic_object" = none ; then -+ arg="$non_pic_object" -+ fi -+ else -+ # If the PIC object exists, use it instead. -+ # $xdir was prepended to $pic_object above. -+ non_pic_object="$pic_object" -+ func_append non_pic_objects " $non_pic_object" -+ fi -+ else -+ # Only an error if not doing a dry-run. -+ if $opt_dry_run; then -+ # Extract subdirectory from the argument. -+ func_dirname "$arg" "/" "" -+ xdir="$func_dirname_result" -+ -+ func_lo2o "$arg" -+ pic_object=$xdir$objdir/$func_lo2o_result -+ non_pic_object=$xdir$func_lo2o_result -+ func_append libobjs " $pic_object" -+ func_append non_pic_objects " $non_pic_object" -+ else -+ func_fatal_error "\`$arg' is not a valid libtool object" -+ fi -+ fi -+ done -+ else -+ func_fatal_error "link input file \`$arg' does not exist" -+ fi -+ arg=$save_arg -+ prev= -+ continue -+ ;; -+ precious_regex) -+ precious_files_regex="$arg" -+ prev= -+ continue -+ ;; -+ release) -+ release="-$arg" -+ prev= -+ continue -+ ;; -+ rpath | xrpath) -+ # We need an absolute path. -+ case $arg in -+ [\\/]* | [A-Za-z]:[\\/]*) ;; -+ *) -+ func_fatal_error "only absolute run-paths are allowed" -+ ;; -+ esac -+ if test "$prev" = rpath; then -+ case "$rpath " in -+ *" $arg "*) ;; -+ *) func_append rpath " $arg" ;; -+ esac -+ else -+ case "$xrpath " in -+ *" $arg "*) ;; -+ *) func_append xrpath " $arg" ;; -+ esac -+ fi -+ prev= -+ continue -+ ;; -+ shrext) -+ shrext_cmds="$arg" -+ prev= -+ continue -+ ;; -+ weak) -+ func_append weak_libs " $arg" -+ prev= -+ continue -+ ;; -+ xcclinker) -+ func_append linker_flags " $qarg" -+ func_append compiler_flags " $qarg" -+ prev= -+ func_append compile_command " $qarg" -+ func_append finalize_command " $qarg" -+ continue -+ ;; -+ xcompiler) -+ func_append compiler_flags " $qarg" -+ prev= -+ func_append compile_command " $qarg" -+ func_append finalize_command " $qarg" -+ continue -+ ;; -+ xlinker) -+ func_append linker_flags " $qarg" -+ func_append compiler_flags " $wl$qarg" -+ prev= -+ func_append compile_command " $wl$qarg" -+ func_append finalize_command " $wl$qarg" -+ continue -+ ;; -+ *) -+ eval "$prev=\"\$arg\"" -+ prev= -+ continue -+ ;; -+ esac -+ fi # test -n "$prev" -+ -+ prevarg="$arg" -+ -+ case $arg in -+ -all-static) -+ if test -n "$link_static_flag"; then -+ # See comment for -static flag below, for more details. -+ func_append compile_command " $link_static_flag" -+ func_append finalize_command " $link_static_flag" -+ fi -+ continue -+ ;; -+ -+ -allow-undefined) -+ # FIXME: remove this flag sometime in the future. -+ func_fatal_error "\`-allow-undefined' must not be used because it is the default" -+ ;; -+ -+ -avoid-version) -+ avoid_version=yes -+ continue -+ ;; -+ -+ -bindir) -+ prev=bindir -+ continue -+ ;; -+ -+ -dlopen) -+ prev=dlfiles -+ continue -+ ;; -+ -+ -dlpreopen) -+ prev=dlprefiles -+ continue -+ ;; -+ -+ -export-dynamic) -+ export_dynamic=yes -+ continue -+ ;; -+ -+ -export-symbols | -export-symbols-regex) -+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then -+ func_fatal_error "more than one -exported-symbols argument is not allowed" -+ fi -+ if test "X$arg" = "X-export-symbols"; then -+ prev=expsyms -+ else -+ prev=expsyms_regex -+ fi -+ continue -+ ;; -+ -+ -framework) -+ prev=framework -+ continue -+ ;; -+ -+ -inst-prefix-dir) -+ prev=inst_prefix -+ continue -+ ;; -+ -+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* -+ # so, if we see these flags be careful not to treat them like -L -+ -L[A-Z][A-Z]*:*) -+ case $with_gcc/$host in -+ no/*-*-irix* | /*-*-irix*) -+ func_append compile_command " $arg" -+ func_append finalize_command " $arg" -+ ;; -+ esac -+ continue -+ ;; -+ -+ -L*) -+ func_stripname "-L" '' "$arg" -+ if test -z "$func_stripname_result"; then -+ if test "$#" -gt 0; then -+ func_fatal_error "require no space between \`-L' and \`$1'" -+ else -+ func_fatal_error "need path for \`-L' option" -+ fi -+ fi -+ func_resolve_sysroot "$func_stripname_result" -+ dir=$func_resolve_sysroot_result -+ # We need an absolute path. -+ case $dir in -+ [\\/]* | [A-Za-z]:[\\/]*) ;; -+ *) -+ absdir=`cd "$dir" && pwd` -+ test -z "$absdir" && \ -+ func_fatal_error "cannot determine absolute directory name of \`$dir'" -+ dir="$absdir" -+ ;; -+ esac -+ case "$deplibs " in -+ *" -L$dir "* | *" $arg "*) -+ # Will only happen for absolute or sysroot arguments -+ ;; -+ *) -+ # Preserve sysroot, but never include relative directories -+ case $dir in -+ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; -+ *) func_append deplibs " -L$dir" ;; -+ esac -+ func_append lib_search_path " $dir" -+ ;; -+ esac -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) -+ testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` -+ case :$dllsearchpath: in -+ *":$dir:"*) ;; -+ ::) dllsearchpath=$dir;; -+ *) func_append dllsearchpath ":$dir";; -+ esac -+ case :$dllsearchpath: in -+ *":$testbindir:"*) ;; -+ ::) dllsearchpath=$testbindir;; -+ *) func_append dllsearchpath ":$testbindir";; -+ esac -+ ;; -+ esac -+ continue -+ ;; -+ -+ -l*) -+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) -+ # These systems don't actually have a C or math library (as such) -+ continue -+ ;; -+ *-*-os2*) -+ # These systems don't actually have a C library (as such) -+ test "X$arg" = "X-lc" && continue -+ ;; -+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) -+ # Do not include libc due to us having libc/libc_r. -+ test "X$arg" = "X-lc" && continue -+ ;; -+ *-*-rhapsody* | *-*-darwin1.[012]) -+ # Rhapsody C and math libraries are in the System framework -+ func_append deplibs " System.ltframework" -+ continue -+ ;; -+ *-*-sco3.2v5* | *-*-sco5v6*) -+ # Causes problems with __ctype -+ test "X$arg" = "X-lc" && continue -+ ;; -+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) -+ # Compiler inserts libc in the correct place for threads to work -+ test "X$arg" = "X-lc" && continue -+ ;; -+ esac -+ elif test "X$arg" = "X-lc_r"; then -+ case $host in -+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) -+ # Do not include libc_r directly, use -pthread flag. -+ continue -+ ;; -+ esac -+ fi -+ func_append deplibs " $arg" -+ continue -+ ;; -+ -+ -module) -+ module=yes -+ continue -+ ;; -+ -+ # Tru64 UNIX uses -model [arg] to determine the layout of C++ -+ # classes, name mangling, and exception handling. -+ # Darwin uses the -arch flag to determine output architecture. -+ -model|-arch|-isysroot|--sysroot) -+ func_append compiler_flags " $arg" -+ func_append compile_command " $arg" -+ func_append finalize_command " $arg" -+ prev=xcompiler -+ continue -+ ;; -+ -+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) -+ func_append compiler_flags " $arg" -+ func_append compile_command " $arg" -+ func_append finalize_command " $arg" -+ case "$new_inherited_linker_flags " in -+ *" $arg "*) ;; -+ * ) func_append new_inherited_linker_flags " $arg" ;; -+ esac -+ continue -+ ;; -+ -+ -multi_module) -+ single_module="${wl}-multi_module" -+ continue -+ ;; -+ -+ -no-fast-install) -+ fast_install=no -+ continue -+ ;; -+ -+ -no-install) -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) -+ # The PATH hackery in wrapper scripts is required on Windows -+ # and Darwin in order for the loader to find any dlls it needs. -+ func_warning "\`-no-install' is ignored for $host" -+ func_warning "assuming \`-no-fast-install' instead" -+ fast_install=no -+ ;; -+ *) no_install=yes ;; -+ esac -+ continue -+ ;; -+ -+ -no-undefined) -+ allow_undefined=no -+ continue -+ ;; -+ -+ -objectlist) -+ prev=objectlist -+ continue -+ ;; -+ -+ -o) prev=output ;; -+ -+ -precious-files-regex) -+ prev=precious_regex -+ continue -+ ;; -+ -+ -release) -+ prev=release -+ continue -+ ;; -+ -+ -rpath) -+ prev=rpath -+ continue -+ ;; -+ -+ -R) -+ prev=xrpath -+ continue -+ ;; -+ -+ -R*) -+ func_stripname '-R' '' "$arg" -+ dir=$func_stripname_result -+ # We need an absolute path. -+ case $dir in -+ [\\/]* | [A-Za-z]:[\\/]*) ;; -+ =*) -+ func_stripname '=' '' "$dir" -+ dir=$lt_sysroot$func_stripname_result -+ ;; -+ *) -+ func_fatal_error "only absolute run-paths are allowed" -+ ;; -+ esac -+ case "$xrpath " in -+ *" $dir "*) ;; -+ *) func_append xrpath " $dir" ;; -+ esac -+ continue -+ ;; -+ -+ -shared) -+ # The effects of -shared are defined in a previous loop. -+ continue -+ ;; -+ -+ -shrext) -+ prev=shrext -+ continue -+ ;; -+ -+ -static | -static-libtool-libs) -+ # The effects of -static are defined in a previous loop. -+ # We used to do the same as -all-static on platforms that -+ # didn't have a PIC flag, but the assumption that the effects -+ # would be equivalent was wrong. It would break on at least -+ # Digital Unix and AIX. -+ continue -+ ;; -+ -+ -thread-safe) -+ thread_safe=yes -+ continue -+ ;; -+ -+ -version-info) -+ prev=vinfo -+ continue -+ ;; -+ -+ -version-number) -+ prev=vinfo -+ vinfo_number=yes -+ continue -+ ;; -+ -+ -weak) -+ prev=weak -+ continue -+ ;; -+ -+ -Wc,*) -+ func_stripname '-Wc,' '' "$arg" -+ args=$func_stripname_result -+ arg= -+ save_ifs="$IFS"; IFS=',' -+ for flag in $args; do -+ IFS="$save_ifs" -+ func_quote_for_eval "$flag" -+ func_append arg " $func_quote_for_eval_result" -+ func_append compiler_flags " $func_quote_for_eval_result" -+ done -+ IFS="$save_ifs" -+ func_stripname ' ' '' "$arg" -+ arg=$func_stripname_result -+ ;; -+ -+ -Wl,*) -+ func_stripname '-Wl,' '' "$arg" -+ args=$func_stripname_result -+ arg= -+ save_ifs="$IFS"; IFS=',' -+ for flag in $args; do -+ IFS="$save_ifs" -+ func_quote_for_eval "$flag" -+ func_append arg " $wl$func_quote_for_eval_result" -+ func_append compiler_flags " $wl$func_quote_for_eval_result" -+ func_append linker_flags " $func_quote_for_eval_result" -+ done -+ IFS="$save_ifs" -+ func_stripname ' ' '' "$arg" -+ arg=$func_stripname_result -+ ;; -+ -+ -Xcompiler) -+ prev=xcompiler -+ continue -+ ;; -+ -+ -Xlinker) -+ prev=xlinker -+ continue -+ ;; -+ -+ -XCClinker) -+ prev=xcclinker -+ continue -+ ;; -+ -+ # -msg_* for osf cc -+ -msg_*) -+ func_quote_for_eval "$arg" -+ arg="$func_quote_for_eval_result" -+ ;; -+ -+ # Flags to be passed through unchanged, with rationale: -+ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler -+ # -r[0-9][0-9]* specify processor for the SGI compiler -+ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler -+ # +DA*, +DD* enable 64-bit mode for the HP compiler -+ # -q* compiler args for the IBM compiler -+ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC -+ # -F/path path to uninstalled frameworks, gcc on darwin -+ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC -+ # @file GCC response files -+ # -tp=* Portland pgcc target processor selection -+ # --sysroot=* for sysroot support -+ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization -+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ -+ -O*|-flto*|-fwhopr*|-fuse-linker-plugin) -+ func_quote_for_eval "$arg" -+ arg="$func_quote_for_eval_result" -+ func_append compile_command " $arg" -+ func_append finalize_command " $arg" -+ func_append compiler_flags " $arg" -+ continue -+ ;; -+ -+ # Some other compiler flag. -+ -* | +*) -+ func_quote_for_eval "$arg" -+ arg="$func_quote_for_eval_result" -+ ;; - -- if test -n "$rpath"; then -- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 -- fi -+ *.$objext) -+ # A standard object. -+ func_append objs " $arg" -+ ;; - -- if test -n "$xrpath"; then -- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 -- fi -+ *.lo) -+ # A libtool-controlled object. - -- if test -n "$vinfo"; then -- $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 -- fi -+ # Check to see that this really is a libtool object. -+ if func_lalib_unsafe_p "$arg"; then -+ pic_object= -+ non_pic_object= -+ -+ # Read the .lo file -+ func_source "$arg" -+ -+ if test -z "$pic_object" || -+ test -z "$non_pic_object" || -+ test "$pic_object" = none && -+ test "$non_pic_object" = none; then -+ func_fatal_error "cannot find name of object for \`$arg'" -+ fi -+ -+ # Extract subdirectory from the argument. -+ func_dirname "$arg" "/" "" -+ xdir="$func_dirname_result" -+ -+ if test "$pic_object" != none; then -+ # Prepend the subdirectory the object is found in. -+ pic_object="$xdir$pic_object" - -- if test -n "$release"; then -- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 -- fi -+ if test "$prev" = dlfiles; then -+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then -+ func_append dlfiles " $pic_object" -+ prev= -+ continue -+ else -+ # If libtool objects are unsupported, then we need to preload. -+ prev=dlprefiles -+ fi -+ fi - -- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then -- $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 -- fi -+ # CHECK ME: I think I busted this. -Ossama -+ if test "$prev" = dlprefiles; then -+ # Preload the old-style object. -+ func_append dlprefiles " $pic_object" -+ prev= -+ fi - -- # Now set the variables for building old libraries. -- build_libtool_libs=no -- oldlibs="$output" -- objs="$objs$old_deplibs" -- ;; -+ # A PIC object. -+ func_append libobjs " $pic_object" -+ arg="$pic_object" -+ fi - -- lib) -- # Make sure we only generate libraries of the form `libNAME.la'. -- case $outputname in -- lib*) -- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` -- eval libname=\"$libname_spec\" -- ;; -- *) -- if test "$module" = no; then -- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -- fi -- if test "$need_lib_prefix" != no; then -- # Add the "lib" prefix for modules if required -- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` -- eval libname=\"$libname_spec\" -+ # Non-PIC object. -+ if test "$non_pic_object" != none; then -+ # Prepend the subdirectory the object is found in. -+ non_pic_object="$xdir$non_pic_object" -+ -+ # A standard non-PIC object -+ func_append non_pic_objects " $non_pic_object" -+ if test -z "$pic_object" || test "$pic_object" = none ; then -+ arg="$non_pic_object" -+ fi -+ else -+ # If the PIC object exists, use it instead. -+ # $xdir was prepended to $pic_object above. -+ non_pic_object="$pic_object" -+ func_append non_pic_objects " $non_pic_object" -+ fi - else -- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` -+ # Only an error if not doing a dry-run. -+ if $opt_dry_run; then -+ # Extract subdirectory from the argument. -+ func_dirname "$arg" "/" "" -+ xdir="$func_dirname_result" -+ -+ func_lo2o "$arg" -+ pic_object=$xdir$objdir/$func_lo2o_result -+ non_pic_object=$xdir$func_lo2o_result -+ func_append libobjs " $pic_object" -+ func_append non_pic_objects " $non_pic_object" -+ else -+ func_fatal_error "\`$arg' is not a valid libtool object" -+ fi - fi - ;; -- esac - -- if test -n "$objs"; then -- if test "$deplibs_check_method" != pass_all; then -- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 -- exit 1 -+ *.$libext) -+ # An archive. -+ func_append deplibs " $arg" -+ func_append old_deplibs " $arg" -+ continue -+ ;; -+ -+ *.la) -+ # A libtool-controlled library. -+ -+ func_resolve_sysroot "$arg" -+ if test "$prev" = dlfiles; then -+ # This library was specified with -dlopen. -+ func_append dlfiles " $func_resolve_sysroot_result" -+ prev= -+ elif test "$prev" = dlprefiles; then -+ # The library was specified with -dlpreopen. -+ func_append dlprefiles " $func_resolve_sysroot_result" -+ prev= - else -- echo -- echo "*** Warning: Linking the shared library $output against the non-libtool" -- echo "*** objects $objs is not portable!" -- libobjs="$libobjs $objs" -+ func_append deplibs " $func_resolve_sysroot_result" - fi -- fi -+ continue -+ ;; - -- if test "$dlself" != no; then -- $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 -- fi -+ # Some other compiler argument. -+ *) -+ # Unknown arguments in both finalize_command and compile_command need -+ # to be aesthetically quoted because they are evaled later. -+ func_quote_for_eval "$arg" -+ arg="$func_quote_for_eval_result" -+ ;; -+ esac # arg - -- set dummy $rpath -- if test $# -gt 2; then -- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 -+ # Now actually substitute the argument into the commands. -+ if test -n "$arg"; then -+ func_append compile_command " $arg" -+ func_append finalize_command " $arg" - fi -- install_libdir="$2" -+ done # argument parsing loop - -- oldlibs= -- if test -z "$rpath"; then -- if test "$build_libtool_libs" = yes; then -- # Building a libtool convenience library. -- libext=al -- oldlibs="$output_objdir/$libname.$libext $oldlibs" -- build_libtool_libs=convenience -- build_old_libs=yes -- fi -+ test -n "$prev" && \ -+ func_fatal_help "the \`$prevarg' option requires an argument" - -- if test -n "$vinfo"; then -- $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 -- fi -+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then -+ eval arg=\"$export_dynamic_flag_spec\" -+ func_append compile_command " $arg" -+ func_append finalize_command " $arg" -+ fi - -- if test -n "$release"; then -- $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 -- fi -- else -+ oldlibs= -+ # calculate the name of the file, without its directory -+ func_basename "$output" -+ outputname="$func_basename_result" -+ libobjs_save="$libobjs" - -- # Parse the version information argument. -- save_ifs="$IFS"; IFS=':' -- set dummy $vinfo 0 0 0 -- IFS="$save_ifs" -+ if test -n "$shlibpath_var"; then -+ # get the directories listed in $shlibpath_var -+ eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` -+ else -+ shlib_search_path= -+ fi -+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\" -+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - -- if test -n "$8"; then -- $echo "$modename: too many parameters to \`-version-info'" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -- fi -+ func_dirname "$output" "/" "" -+ output_objdir="$func_dirname_result$objdir" -+ func_to_tool_file "$output_objdir/" -+ tool_output_objdir=$func_to_tool_file_result -+ # Create the object directory. -+ func_mkdir_p "$output_objdir" -+ -+ # Determine the type of output -+ case $output in -+ "") -+ func_fatal_help "you must specify an output file" -+ ;; -+ *.$libext) linkmode=oldlib ;; -+ *.lo | *.$objext) linkmode=obj ;; -+ *.la) linkmode=lib ;; -+ *) linkmode=prog ;; # Anything else should be a program. -+ esac - -- current="$2" -- revision="$3" -- age="$4" -+ specialdeplibs= - -- # Check that each of the things are valid numbers. -- case $current in -- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; -- *) -- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 -- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 -- exit 1 -+ libs= -+ # Find all interdependent deplibs by searching for libraries -+ # that are linked more than once (e.g. -la -lb -la) -+ for deplib in $deplibs; do -+ if $opt_preserve_dup_deps ; then -+ case "$libs " in -+ *" $deplib "*) func_append specialdeplibs " $deplib" ;; -+ esac -+ fi -+ func_append libs " $deplib" -+ done -+ -+ if test "$linkmode" = lib; then -+ libs="$predeps $libs $compiler_lib_search_path $postdeps" -+ -+ # Compute libraries that are listed more than once in $predeps -+ # $postdeps and mark them as special (i.e., whose duplicates are -+ # not to be eliminated). -+ pre_post_deps= -+ if $opt_duplicate_compiler_generated_deps; then -+ for pre_post_dep in $predeps $postdeps; do -+ case "$pre_post_deps " in -+ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; -+ esac -+ func_append pre_post_deps " $pre_post_dep" -+ done -+ fi -+ pre_post_deps= -+ fi -+ -+ deplibs= -+ newdependency_libs= -+ newlib_search_path= -+ need_relink=no # whether we're linking any uninstalled libtool libraries -+ notinst_deplibs= # not-installed libtool libraries -+ notinst_path= # paths that contain not-installed libtool libraries -+ -+ case $linkmode in -+ lib) -+ passes="conv dlpreopen link" -+ for file in $dlfiles $dlprefiles; do -+ case $file in -+ *.la) ;; -+ *) -+ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" -+ ;; -+ esac -+ done -+ ;; -+ prog) -+ compile_deplibs= -+ finalize_deplibs= -+ alldeplibs=no -+ newdlfiles= -+ newdlprefiles= -+ passes="conv scan dlopen dlpreopen link" -+ ;; -+ *) passes="conv" -+ ;; -+ esac -+ -+ for pass in $passes; do -+ # The preopen pass in lib mode reverses $deplibs; put it back here -+ # so that -L comes before libs that need it for instance... -+ if test "$linkmode,$pass" = "lib,link"; then -+ ## FIXME: Find the place where the list is rebuilt in the wrong -+ ## order, and fix it there properly -+ tmp_deplibs= -+ for deplib in $deplibs; do -+ tmp_deplibs="$deplib $tmp_deplibs" -+ done -+ deplibs="$tmp_deplibs" -+ fi -+ -+ if test "$linkmode,$pass" = "lib,link" || -+ test "$linkmode,$pass" = "prog,scan"; then -+ libs="$deplibs" -+ deplibs= -+ fi -+ if test "$linkmode" = prog; then -+ case $pass in -+ dlopen) libs="$dlfiles" ;; -+ dlpreopen) libs="$dlprefiles" ;; -+ link) -+ libs="$deplibs %DEPLIBS%" -+ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" - ;; - esac -+ fi -+ if test "$linkmode,$pass" = "lib,dlpreopen"; then -+ # Collect and forward deplibs of preopened libtool libs -+ for lib in $dlprefiles; do -+ # Ignore non-libtool-libs -+ dependency_libs= -+ func_resolve_sysroot "$lib" -+ case $lib in -+ *.la) func_source "$func_resolve_sysroot_result" ;; -+ esac - -- case $revision in -- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; -- *) -- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 -- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 -- exit 1 -+ # Collect preopened libtool deplibs, except any this library -+ # has declared as weak libs -+ for deplib in $dependency_libs; do -+ func_basename "$deplib" -+ deplib_base=$func_basename_result -+ case " $weak_libs " in -+ *" $deplib_base "*) ;; -+ *) func_append deplibs " $deplib" ;; -+ esac -+ done -+ done -+ libs="$dlprefiles" -+ fi -+ if test "$pass" = dlopen; then -+ # Collect dlpreopened libraries -+ save_deplibs="$deplibs" -+ deplibs= -+ fi -+ -+ for deplib in $libs; do -+ lib= -+ found=no -+ case $deplib in -+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) -+ if test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ func_append compiler_flags " $deplib" -+ if test "$linkmode" = lib ; then -+ case "$new_inherited_linker_flags " in -+ *" $deplib "*) ;; -+ * ) func_append new_inherited_linker_flags " $deplib" ;; -+ esac -+ fi -+ fi -+ continue -+ ;; -+ -l*) -+ if test "$linkmode" != lib && test "$linkmode" != prog; then -+ func_warning "\`-l' is ignored for archives/objects" -+ continue -+ fi -+ func_stripname '-l' '' "$deplib" -+ name=$func_stripname_result -+ if test "$linkmode" = lib; then -+ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" -+ else -+ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" -+ fi -+ for searchdir in $searchdirs; do -+ for search_ext in .la $std_shrext .so .a; do -+ # Search the libtool library -+ lib="$searchdir/lib${name}${search_ext}" -+ if test -f "$lib"; then -+ if test "$search_ext" = ".la"; then -+ found=yes -+ else -+ found=no -+ fi -+ break 2 -+ fi -+ done -+ done -+ if test "$found" != yes; then -+ # deplib doesn't seem to be a libtool library -+ if test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ deplibs="$deplib $deplibs" -+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" -+ fi -+ continue -+ else # deplib is a libtool library -+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, -+ # We need to do some special things here, and not later. -+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -+ case " $predeps $postdeps " in -+ *" $deplib "*) -+ if func_lalib_p "$lib"; then -+ library_names= -+ old_library= -+ func_source "$lib" -+ for l in $old_library $library_names; do -+ ll="$l" -+ done -+ if test "X$ll" = "X$old_library" ; then # only static version available -+ found=no -+ func_dirname "$lib" "" "." -+ ladir="$func_dirname_result" -+ lib=$ladir/$old_library -+ if test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ deplibs="$deplib $deplibs" -+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" -+ fi -+ continue -+ fi -+ fi -+ ;; -+ *) ;; -+ esac -+ fi -+ fi -+ ;; # -l -+ *.ltframework) -+ if test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ deplibs="$deplib $deplibs" -+ if test "$linkmode" = lib ; then -+ case "$new_inherited_linker_flags " in -+ *" $deplib "*) ;; -+ * ) func_append new_inherited_linker_flags " $deplib" ;; -+ esac -+ fi -+ fi -+ continue -+ ;; -+ -L*) -+ case $linkmode in -+ lib) -+ deplibs="$deplib $deplibs" -+ test "$pass" = conv && continue -+ newdependency_libs="$deplib $newdependency_libs" -+ func_stripname '-L' '' "$deplib" -+ func_resolve_sysroot "$func_stripname_result" -+ func_append newlib_search_path " $func_resolve_sysroot_result" -+ ;; -+ prog) -+ if test "$pass" = conv; then -+ deplibs="$deplib $deplibs" -+ continue -+ fi -+ if test "$pass" = scan; then -+ deplibs="$deplib $deplibs" -+ else -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ fi -+ func_stripname '-L' '' "$deplib" -+ func_resolve_sysroot "$func_stripname_result" -+ func_append newlib_search_path " $func_resolve_sysroot_result" -+ ;; -+ *) -+ func_warning "\`-L' is ignored for archives/objects" -+ ;; -+ esac # linkmode -+ continue -+ ;; # -L -+ -R*) -+ if test "$pass" = link; then -+ func_stripname '-R' '' "$deplib" -+ func_resolve_sysroot "$func_stripname_result" -+ dir=$func_resolve_sysroot_result -+ # Make sure the xrpath contains only unique directories. -+ case "$xrpath " in -+ *" $dir "*) ;; -+ *) func_append xrpath " $dir" ;; -+ esac -+ fi -+ deplibs="$deplib $deplibs" -+ continue -+ ;; -+ *.la) -+ func_resolve_sysroot "$deplib" -+ lib=$func_resolve_sysroot_result -+ ;; -+ *.$libext) -+ if test "$pass" = conv; then -+ deplibs="$deplib $deplibs" -+ continue -+ fi -+ case $linkmode in -+ lib) -+ # Linking convenience modules into shared libraries is allowed, -+ # but linking other static libraries is non-portable. -+ case " $dlpreconveniencelibs " in -+ *" $deplib "*) ;; -+ *) -+ valid_a_lib=no -+ case $deplibs_check_method in -+ match_pattern*) -+ set dummy $deplibs_check_method; shift -+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` -+ if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ -+ | $EGREP "$match_pattern_regex" > /dev/null; then -+ valid_a_lib=yes -+ fi -+ ;; -+ pass_all) -+ valid_a_lib=yes -+ ;; -+ esac -+ if test "$valid_a_lib" != yes; then -+ echo -+ $ECHO "*** Warning: Trying to link with static lib archive $deplib." -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which you do not appear to have" -+ echo "*** because the file extensions .$libext of this argument makes me believe" -+ echo "*** that it is just a static archive that I should not use here." -+ else -+ echo -+ $ECHO "*** Warning: Linking the shared library $output against the" -+ $ECHO "*** static library $deplib is not portable!" -+ deplibs="$deplib $deplibs" -+ fi -+ ;; -+ esac -+ continue -+ ;; -+ prog) -+ if test "$pass" != link; then -+ deplibs="$deplib $deplibs" -+ else -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ fi -+ continue -+ ;; -+ esac # linkmode -+ ;; # *.$libext -+ *.lo | *.$objext) -+ if test "$pass" = conv; then -+ deplibs="$deplib $deplibs" -+ elif test "$linkmode" = prog; then -+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then -+ # If there is no dlopen support or we're linking statically, -+ # we need to preload. -+ func_append newdlprefiles " $deplib" -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ func_append newdlfiles " $deplib" -+ fi -+ fi -+ continue - ;; -- esac -- -- case $age in -- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; -- *) -- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 -- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 -- exit 1 -+ %DEPLIBS%) -+ alldeplibs=yes -+ continue - ;; -- esac -+ esac # case $deplib - -- if test $age -gt $current; then -- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 -- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 -- exit 1 -+ if test "$found" = yes || test -f "$lib"; then : -+ else -+ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" - fi - -- # Calculate the version variables. -- major= -- versuffix= -- verstring= -- case $version_type in -- none) ;; -+ # Check to see that this really is a libtool archive. -+ func_lalib_unsafe_p "$lib" \ -+ || func_fatal_error "\`$lib' is not a valid libtool archive" - -- darwin) -- # Like Linux, but with the current version available in -- # verstring for coding it into the library header -- major=.`expr $current - $age` -- versuffix="$major.$age.$revision" -- # Darwin ld doesn't like 0 for these options... -- minor_current=`expr $current + 1` -- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" -- ;; -+ func_dirname "$lib" "" "." -+ ladir="$func_dirname_result" - -- freebsd-aout) -- major=".$current" -- versuffix=".$current.$revision"; -- ;; -+ dlname= -+ dlopen= -+ dlpreopen= -+ libdir= -+ library_names= -+ old_library= -+ inherited_linker_flags= -+ # If the library was installed with an old release of libtool, -+ # it will not redefine variables installed, or shouldnotlink -+ installed=yes -+ shouldnotlink=no -+ avoidtemprpath= - -- freebsd-elf) -- major=".$current" -- versuffix=".$current"; -- ;; - -- irix) -- major=`expr $current - $age + 1` -- verstring="sgi$major.$revision" -+ # Read the .la file -+ func_source "$lib" - -- # Add in all the interfaces that we are compatible with. -- loop=$revision -- while test $loop != 0; do -- iface=`expr $revision - $loop` -- loop=`expr $loop - 1` -- verstring="sgi$major.$iface:$verstring" -+ # Convert "-framework foo" to "foo.ltframework" -+ if test -n "$inherited_linker_flags"; then -+ tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` -+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do -+ case " $new_inherited_linker_flags " in -+ *" $tmp_inherited_linker_flag "*) ;; -+ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; -+ esac - done -+ fi -+ dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` -+ if test "$linkmode,$pass" = "lib,link" || -+ test "$linkmode,$pass" = "prog,scan" || -+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then -+ test -n "$dlopen" && func_append dlfiles " $dlopen" -+ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" -+ fi - -- # Before this point, $major must not contain `.'. -- major=.$major -- versuffix="$major.$revision" -- ;; -- -- linux) -- major=.`expr $current - $age` -- versuffix="$major.$age.$revision" -- ;; -+ if test "$pass" = conv; then -+ # Only check for convenience libraries -+ deplibs="$lib $deplibs" -+ if test -z "$libdir"; then -+ if test -z "$old_library"; then -+ func_fatal_error "cannot find name of link library for \`$lib'" -+ fi -+ # It is a libtool convenience library, so add in its objects. -+ func_append convenience " $ladir/$objdir/$old_library" -+ func_append old_convenience " $ladir/$objdir/$old_library" -+ tmp_libs= -+ for deplib in $dependency_libs; do -+ deplibs="$deplib $deplibs" -+ if $opt_preserve_dup_deps ; then -+ case "$tmp_libs " in -+ *" $deplib "*) func_append specialdeplibs " $deplib" ;; -+ esac -+ fi -+ func_append tmp_libs " $deplib" -+ done -+ elif test "$linkmode" != prog && test "$linkmode" != lib; then -+ func_fatal_error "\`$lib' is not a convenience library" -+ fi -+ continue -+ fi # $pass = conv - -- osf) -- major=`expr $current - $age` -- versuffix=".$current.$age.$revision" -- verstring="$current.$age.$revision" - -- # Add in all the interfaces that we are compatible with. -- loop=$age -- while test $loop != 0; do -- iface=`expr $current - $loop` -- loop=`expr $loop - 1` -- verstring="$verstring:${iface}.0" -+ # Get the name of the library we link against. -+ linklib= -+ if test -n "$old_library" && -+ { test "$prefer_static_libs" = yes || -+ test "$prefer_static_libs,$installed" = "built,no"; }; then -+ linklib=$old_library -+ else -+ for l in $old_library $library_names; do -+ linklib="$l" - done -+ fi -+ if test -z "$linklib"; then -+ func_fatal_error "cannot find name of link library for \`$lib'" -+ fi - -- # Make executables depend on our current version. -- verstring="$verstring:${current}.0" -- ;; -- -- sunos) -- major=".$current" -- versuffix=".$current.$revision" -- ;; -- -- windows) -- # Use '-' rather than '.', since we only want one -- # extension on DOS 8.3 filesystems. -- major=`expr $current - $age` -- versuffix="-$major" -- ;; -+ # This library was specified with -dlopen. -+ if test "$pass" = dlopen; then -+ if test -z "$libdir"; then -+ func_fatal_error "cannot -dlopen a convenience library: \`$lib'" -+ fi -+ if test -z "$dlname" || -+ test "$dlopen_support" != yes || -+ test "$build_libtool_libs" = no; then -+ # If there is no dlname, no dlopen support or we're linking -+ # statically, we need to preload. We also need to preload any -+ # dependent libraries so libltdl's deplib preloader doesn't -+ # bomb out in the load deplibs phase. -+ func_append dlprefiles " $lib $dependency_libs" -+ else -+ func_append newdlfiles " $lib" -+ fi -+ continue -+ fi # $pass = dlopen - -+ # We need an absolute path. -+ case $ladir in -+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; - *) -- $echo "$modename: unknown library version type \`$version_type'" 1>&2 -- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 -- exit 1 -+ abs_ladir=`cd "$ladir" && pwd` -+ if test -z "$abs_ladir"; then -+ func_warning "cannot determine absolute directory name of \`$ladir'" -+ func_warning "passing it literally to the linker, although it might fail" -+ abs_ladir="$ladir" -+ fi - ;; - esac -+ func_basename "$lib" -+ laname="$func_basename_result" - -- # Clear the version info if we defaulted, and they specified a release. -- if test -z "$vinfo" && test -n "$release"; then -- major= -- verstring="0.0" -- case $version_type in -- darwin) -- # we can't check for "0.0" in archive_cmds due to quoting -- # problems, so we reset it completely -- verstring="" -+ # Find the relevant object directory and library name. -+ if test "X$installed" = Xyes; then -+ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then -+ func_warning "library \`$lib' was moved." -+ dir="$ladir" -+ absdir="$abs_ladir" -+ libdir="$abs_ladir" -+ else -+ dir="$lt_sysroot$libdir" -+ absdir="$lt_sysroot$libdir" -+ fi -+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes -+ else -+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then -+ dir="$ladir" -+ absdir="$abs_ladir" -+ # Remove this search path later -+ func_append notinst_path " $abs_ladir" -+ else -+ dir="$ladir/$objdir" -+ absdir="$abs_ladir/$objdir" -+ # Remove this search path later -+ func_append notinst_path " $abs_ladir" -+ fi -+ fi # $installed = yes -+ func_stripname 'lib' '.la' "$laname" -+ name=$func_stripname_result -+ -+ # This library was specified with -dlpreopen. -+ if test "$pass" = dlpreopen; then -+ if test -z "$libdir" && test "$linkmode" = prog; then -+ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" -+ fi -+ case "$host" in -+ # special handling for platforms with PE-DLLs. -+ *cygwin* | *mingw* | *cegcc* ) -+ # Linker will automatically link against shared library if both -+ # static and shared are present. Therefore, ensure we extract -+ # symbols from the import library if a shared library is present -+ # (otherwise, the dlopen module name will be incorrect). We do -+ # this by putting the import library name into $newdlprefiles. -+ # We recover the dlopen module name by 'saving' the la file -+ # name in a special purpose variable, and (later) extracting the -+ # dlname from the la file. -+ if test -n "$dlname"; then -+ func_tr_sh "$dir/$linklib" -+ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" -+ func_append newdlprefiles " $dir/$linklib" -+ else -+ func_append newdlprefiles " $dir/$old_library" -+ # Keep a list of preopened convenience libraries to check -+ # that they are being used correctly in the link pass. -+ test -z "$libdir" && \ -+ func_append dlpreconveniencelibs " $dir/$old_library" -+ fi - ;; -- *) -- verstring="0.0" -+ * ) -+ # Prefer using a static library (so that no silly _DYNAMIC symbols -+ # are required to link). -+ if test -n "$old_library"; then -+ func_append newdlprefiles " $dir/$old_library" -+ # Keep a list of preopened convenience libraries to check -+ # that they are being used correctly in the link pass. -+ test -z "$libdir" && \ -+ func_append dlpreconveniencelibs " $dir/$old_library" -+ # Otherwise, use the dlname, so that lt_dlopen finds it. -+ elif test -n "$dlname"; then -+ func_append newdlprefiles " $dir/$dlname" -+ else -+ func_append newdlprefiles " $dir/$linklib" -+ fi - ;; - esac -- if test "$need_version" = no; then -- versuffix= -+ fi # $pass = dlpreopen -+ -+ if test -z "$libdir"; then -+ # Link the convenience library -+ if test "$linkmode" = lib; then -+ deplibs="$dir/$old_library $deplibs" -+ elif test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$dir/$old_library $compile_deplibs" -+ finalize_deplibs="$dir/$old_library $finalize_deplibs" - else -- versuffix=".0.0" -+ deplibs="$lib $deplibs" # used for prog,scan pass - fi -+ continue - fi - -- # Remove version info from name if versioning should be avoided -- if test "$avoid_version" = yes && test "$need_version" = no; then -- major= -- versuffix= -- verstring="" -- fi - -- # Check to see if the archive will have undefined symbols. -- if test "$allow_undefined" = yes; then -- if test "$allow_undefined_flag" = unsupported; then -- $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 -- build_libtool_libs=no -- build_old_libs=yes -- fi -- else -- # Don't allow undefined symbols. -- allow_undefined_flag="$no_undefined_flag" -- fi -- fi -+ if test "$linkmode" = prog && test "$pass" != link; then -+ func_append newlib_search_path " $ladir" -+ deplibs="$lib $deplibs" - -- if test "$mode" != relink; then -- # Remove our outputs. -- $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" -- $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* -- fi -+ linkalldeplibs=no -+ if test "$link_all_deplibs" != no || test -z "$library_names" || -+ test "$build_libtool_libs" = no; then -+ linkalldeplibs=yes -+ fi - -- # Now set the variables for building old libraries. -- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then -- oldlibs="$oldlibs $output_objdir/$libname.$libext" -+ tmp_libs= -+ for deplib in $dependency_libs; do -+ case $deplib in -+ -L*) func_stripname '-L' '' "$deplib" -+ func_resolve_sysroot "$func_stripname_result" -+ func_append newlib_search_path " $func_resolve_sysroot_result" -+ ;; -+ esac -+ # Need to link against all dependency_libs? -+ if test "$linkalldeplibs" = yes; then -+ deplibs="$deplib $deplibs" -+ else -+ # Need to hardcode shared library paths -+ # or/and link against static libraries -+ newdependency_libs="$deplib $newdependency_libs" -+ fi -+ if $opt_preserve_dup_deps ; then -+ case "$tmp_libs " in -+ *" $deplib "*) func_append specialdeplibs " $deplib" ;; -+ esac -+ fi -+ func_append tmp_libs " $deplib" -+ done # for deplib -+ continue -+ fi # $linkmode = prog... - -- # Transform .lo files to .o files. -- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` -- fi -+ if test "$linkmode,$pass" = "prog,link"; then -+ if test -n "$library_names" && -+ { { test "$prefer_static_libs" = no || -+ test "$prefer_static_libs,$installed" = "built,yes"; } || -+ test -z "$old_library"; }; then -+ # We need to hardcode the library path -+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then -+ # Make sure the rpath contains only unique directories. -+ case "$temp_rpath:" in -+ *"$absdir:"*) ;; -+ *) func_append temp_rpath "$absdir:" ;; -+ esac -+ fi - -- # Eliminate all temporary directories. -- for path in $notinst_path; do -- lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'` -- deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'` -- dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'` -- done -+ # Hardcode the library path. -+ # Skip directories that are in the system default run-time -+ # search path. -+ case " $sys_lib_dlsearch_path " in -+ *" $absdir "*) ;; -+ *) -+ case "$compile_rpath " in -+ *" $absdir "*) ;; -+ *) func_append compile_rpath " $absdir" ;; -+ esac -+ ;; -+ esac -+ case " $sys_lib_dlsearch_path " in -+ *" $libdir "*) ;; -+ *) -+ case "$finalize_rpath " in -+ *" $libdir "*) ;; -+ *) func_append finalize_rpath " $libdir" ;; -+ esac -+ ;; -+ esac -+ fi # $linkmode,$pass = prog,link... - -- if test -n "$xrpath"; then -- # If the user specified any rpath flags, then add them. -- temp_xrpath= -- for libdir in $xrpath; do -- temp_xrpath="$temp_xrpath -R$libdir" -- case "$finalize_rpath " in -- *" $libdir "*) ;; -- *) finalize_rpath="$finalize_rpath $libdir" ;; -- esac -- done -- if test $hardcode_into_libs != yes || test $build_old_libs = yes; then -- dependency_libs="$temp_xrpath $dependency_libs" -+ if test "$alldeplibs" = yes && -+ { test "$deplibs_check_method" = pass_all || -+ { test "$build_libtool_libs" = yes && -+ test -n "$library_names"; }; }; then -+ # We only need to search for static libraries -+ continue -+ fi - fi -- fi -- -- # Make sure dlfiles contains only unique files that won't be dlpreopened -- old_dlfiles="$dlfiles" -- dlfiles= -- for lib in $old_dlfiles; do -- case " $dlprefiles $dlfiles " in -- *" $lib "*) ;; -- *) dlfiles="$dlfiles $lib" ;; -- esac -- done -- -- # Make sure dlprefiles contains only unique files -- old_dlprefiles="$dlprefiles" -- dlprefiles= -- for lib in $old_dlprefiles; do -- case "$dlprefiles " in -- *" $lib "*) ;; -- *) dlprefiles="$dlprefiles $lib" ;; -- esac -- done - -- if test "$build_libtool_libs" = yes; then -- if test -n "$rpath"; then -+ link_static=no # Whether the deplib will be linked statically -+ use_static_libs=$prefer_static_libs -+ if test "$use_static_libs" = built && test "$installed" = yes; then -+ use_static_libs=no -+ fi -+ if test -n "$library_names" && -+ { test "$use_static_libs" = no || test -z "$old_library"; }; then - case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) -- # these systems don't actually have a c library (as such)! -- ;; -- *-*-rhapsody* | *-*-darwin1.[012]) -- # Rhapsody C library is in the System framework -- deplibs="$deplibs -framework System" -- ;; -- *-*-netbsd*) -- # Don't link with libc until the a.out ld.so is fixed. -- ;; -- *-*-openbsd*) -- # Do not include libc due to us having libc/libc_r. -+ *cygwin* | *mingw* | *cegcc*) -+ # No point in relinking DLLs because paths are not encoded -+ func_append notinst_deplibs " $lib" -+ need_relink=no - ;; - *) -- # Add libc to deplibs on all other systems if necessary. -- if test $build_libtool_need_lc = "yes"; then -- deplibs="$deplibs -lc" -+ if test "$installed" = no; then -+ func_append notinst_deplibs " $lib" -+ need_relink=yes - fi - ;; - esac -- fi -+ # This is a shared library - -- # Transform deplibs into only deplibs that can be linked in shared. -- name_save=$name -- libname_save=$libname -- release_save=$release -- versuffix_save=$versuffix -- major_save=$major -- # I'm not sure if I'm treating the release correctly. I think -- # release should show up in the -l (ie -lgmp5) so we don't want to -- # add it in twice. Is that correct? -- release="" -- versuffix="" -- major="" -- newdeplibs= -- droppeddeps=no -- case $deplibs_check_method in -- pass_all) -- # Don't check for shared/static. Everything works. -- # This might be a little naive. We might want to check -- # whether the library exists or not. But this is on -- # osf3 & osf4 and I'm not really sure... Just -- # implementing what was already the behaviour. -- newdeplibs=$deplibs -- ;; -- test_compile) -- # This code stresses the "libraries are programs" paradigm to its -- # limits. Maybe even breaks it. We compile a program, linking it -- # against the deplibs as a proxy for the library. Then we can check -- # whether they linked in statically or dynamically with ldd. -- $rm conftest.c -- cat > conftest.c <<EOF -- int main() { return 0; } --EOF -- $rm conftest -- $CC -o conftest conftest.c $deplibs -- if test $? -eq 0 ; then -- ldd_output=`ldd conftest` -- for i in $deplibs; do -- name="`expr $i : '-l\(.*\)'`" -- # If $name is empty we are operating on a -L argument. -- if test -n "$name" && test "$name" != "0"; then -- libname=`eval \\$echo \"$libname_spec\"` -- deplib_matches=`eval \\$echo \"$library_names_spec\"` -- set dummy $deplib_matches -- deplib_match=$2 -- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then -- newdeplibs="$newdeplibs $i" -- else -- droppeddeps=yes -- echo -- echo "*** Warning: This library needs some functionality provided by $i." -- echo "*** I have the capability to make that library automatically link in when" -- echo "*** you link to this library. But I can only do this if you have a" -- echo "*** shared version of the library, which you do not appear to have." -- fi -+ # Warn about portability, can't link against -module's on some -+ # systems (darwin). Don't bleat about dlopened modules though! -+ dlopenmodule="" -+ for dlpremoduletest in $dlprefiles; do -+ if test "X$dlpremoduletest" = "X$lib"; then -+ dlopenmodule="$dlpremoduletest" -+ break -+ fi -+ done -+ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then -+ echo -+ if test "$linkmode" = prog; then -+ $ECHO "*** Warning: Linking the executable $output against the loadable module" -+ else -+ $ECHO "*** Warning: Linking the shared library $output against the loadable module" -+ fi -+ $ECHO "*** $linklib is not portable!" -+ fi -+ if test "$linkmode" = lib && -+ test "$hardcode_into_libs" = yes; then -+ # Hardcode the library path. -+ # Skip directories that are in the system default run-time -+ # search path. -+ case " $sys_lib_dlsearch_path " in -+ *" $absdir "*) ;; -+ *) -+ case "$compile_rpath " in -+ *" $absdir "*) ;; -+ *) func_append compile_rpath " $absdir" ;; -+ esac -+ ;; -+ esac -+ case " $sys_lib_dlsearch_path " in -+ *" $libdir "*) ;; -+ *) -+ case "$finalize_rpath " in -+ *" $libdir "*) ;; -+ *) func_append finalize_rpath " $libdir" ;; -+ esac -+ ;; -+ esac -+ fi -+ -+ if test -n "$old_archive_from_expsyms_cmds"; then -+ # figure out the soname -+ set dummy $library_names -+ shift -+ realname="$1" -+ shift -+ libname=`eval "\\$ECHO \"$libname_spec\""` -+ # use dlname if we got it. it's perfectly good, no? -+ if test -n "$dlname"; then -+ soname="$dlname" -+ elif test -n "$soname_spec"; then -+ # bleh windows -+ case $host in -+ *cygwin* | mingw* | *cegcc*) -+ func_arith $current - $age -+ major=$func_arith_result -+ versuffix="-$major" -+ ;; -+ esac -+ eval soname=\"$soname_spec\" -+ else -+ soname="$realname" -+ fi -+ -+ # Make a new name for the extract_expsyms_cmds to use -+ soroot="$soname" -+ func_basename "$soroot" -+ soname="$func_basename_result" -+ func_stripname 'lib' '.dll' "$soname" -+ newlib=libimp-$func_stripname_result.a -+ -+ # If the library has no export list, then create one now -+ if test -f "$output_objdir/$soname-def"; then : -+ else -+ func_verbose "extracting exported symbol list from \`$soname'" -+ func_execute_cmds "$extract_expsyms_cmds" 'exit $?' -+ fi -+ -+ # Create $newlib -+ if test -f "$output_objdir/$newlib"; then :; else -+ func_verbose "generating import library for \`$soname'" -+ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' -+ fi -+ # make sure the library variables are pointing to the new library -+ dir=$output_objdir -+ linklib=$newlib -+ fi # test -n "$old_archive_from_expsyms_cmds" -+ -+ if test "$linkmode" = prog || test "$opt_mode" != relink; then -+ add_shlibpath= -+ add_dir= -+ add= -+ lib_linked=yes -+ case $hardcode_action in -+ immediate | unsupported) -+ if test "$hardcode_direct" = no; then -+ add="$dir/$linklib" -+ case $host in -+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; -+ *-*-sysv4*uw2*) add_dir="-L$dir" ;; -+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ -+ *-*-unixware7*) add_dir="-L$dir" ;; -+ *-*-darwin* ) -+ # if the lib is a (non-dlopened) module then we can not -+ # link against it, someone is ignoring the earlier warnings -+ if /usr/bin/file -L $add 2> /dev/null | -+ $GREP ": [^:]* bundle" >/dev/null ; then -+ if test "X$dlopenmodule" != "X$lib"; then -+ $ECHO "*** Warning: lib $linklib is a module, not a shared library" -+ if test -z "$old_library" ; then -+ echo -+ echo "*** And there doesn't seem to be a static archive available" -+ echo "*** The link will probably fail, sorry" -+ else -+ add="$dir/$old_library" -+ fi -+ elif test -n "$old_library"; then -+ add="$dir/$old_library" -+ fi -+ fi -+ esac -+ elif test "$hardcode_minus_L" = no; then -+ case $host in -+ *-*-sunos*) add_shlibpath="$dir" ;; -+ esac -+ add_dir="-L$dir" -+ add="-l$name" -+ elif test "$hardcode_shlibpath_var" = no; then -+ add_shlibpath="$dir" -+ add="-l$name" - else -- newdeplibs="$newdeplibs $i" -+ lib_linked=no - fi -- done -- else -- # Error occured in the first compile. Let's try to salvage the situation: -- # Compile a seperate program for each library. -- for i in $deplibs; do -- name="`expr $i : '-l\(.*\)'`" -- # If $name is empty we are operating on a -L argument. -- if test -n "$name" && test "$name" != "0"; then -- $rm conftest -- $CC -o conftest conftest.c $i -- # Did it work? -- if test $? -eq 0 ; then -- ldd_output=`ldd conftest` -- libname=`eval \\$echo \"$libname_spec\"` -- deplib_matches=`eval \\$echo \"$library_names_spec\"` -- set dummy $deplib_matches -- deplib_match=$2 -- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then -- newdeplibs="$newdeplibs $i" -- else -- droppeddeps=yes -- echo -- echo "*** Warning: This library needs some functionality provided by $i." -- echo "*** I have the capability to make that library automatically link in when" -- echo "*** you link to this library. But I can only do this if you have a" -- echo "*** shared version of the library, which you do not appear to have." -- fi -- else -- droppeddeps=yes -- echo -- echo "*** Warning! Library $i is needed by this library but I was not able to" -- echo "*** make it link in! You will probably need to install it or some" -- echo "*** library that it depends on before this library will be fully" -- echo "*** functional. Installing it before continuing would be even better." -+ ;; -+ relink) -+ if test "$hardcode_direct" = yes && -+ test "$hardcode_direct_absolute" = no; then -+ add="$dir/$linklib" -+ elif test "$hardcode_minus_L" = yes; then -+ add_dir="-L$dir" -+ # Try looking first in the location we're being installed to. -+ if test -n "$inst_prefix_dir"; then -+ case $libdir in -+ [\\/]*) -+ func_append add_dir " -L$inst_prefix_dir$libdir" -+ ;; -+ esac - fi -+ add="-l$name" -+ elif test "$hardcode_shlibpath_var" = yes; then -+ add_shlibpath="$dir" -+ add="-l$name" - else -- newdeplibs="$newdeplibs $i" -- fi -- done -- fi -- ;; -- file_magic*) -- set dummy $deplibs_check_method -- file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` -- for a_deplib in $deplibs; do -- name="`expr $a_deplib : '-l\(.*\)'`" -- # If $name is empty we are operating on a -L argument. -- if test -n "$name" && test "$name" != "0"; then -- libname=`eval \\$echo \"$libname_spec\"` -- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do -- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` -- for potent_lib in $potential_libs; do -- # Follow soft links. -- if ls -lLd "$potent_lib" 2>/dev/null \ -- | grep " -> " >/dev/null; then -- continue -- fi -- # The statement above tries to avoid entering an -- # endless loop below, in case of cyclic links. -- # We might still enter an endless loop, since a link -- # loop can be closed while we follow links, -- # but so what? -- potlib="$potent_lib" -- while test -h "$potlib" 2>/dev/null; do -- potliblink=`ls -ld $potlib | sed 's/.* -> //'` -- case $potliblink in -- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; -- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; -- esac -- done -- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ -- | sed 10q \ -- | egrep "$file_magic_regex" > /dev/null; then -- newdeplibs="$newdeplibs $a_deplib" -- a_deplib="" -- break 2 -- fi -- done -- done -- if test -n "$a_deplib" ; then -- droppeddeps=yes -- echo -- echo "*** Warning: This library needs some functionality provided by $a_deplib." -- echo "*** I have the capability to make that library automatically link in when" -- echo "*** you link to this library. But I can only do this if you have a" -- echo "*** shared version of the library, which you do not appear to have." -- fi -- else -- # Add a -L argument. -- newdeplibs="$newdeplibs $a_deplib" -- fi -- done # Gone through all deplibs. -- ;; -- match_pattern*) -- set dummy $deplibs_check_method -- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` -- for a_deplib in $deplibs; do -- name="`expr $a_deplib : '-l\(.*\)'`" -- # If $name is empty we are operating on a -L argument. -- if test -n "$name" && test "$name" != "0"; then -- libname=`eval \\$echo \"$libname_spec\"` -- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do -- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` -- for potent_lib in $potential_libs; do -- if eval echo \"$potent_lib\" 2>/dev/null \ -- | sed 10q \ -- | egrep "$match_pattern_regex" > /dev/null; then -- newdeplibs="$newdeplibs $a_deplib" -- a_deplib="" -- break 2 -- fi -- done -- done -- if test -n "$a_deplib" ; then -- droppeddeps=yes -- echo -- echo "*** Warning: This library needs some functionality provided by $a_deplib." -- echo "*** I have the capability to make that library automatically link in when" -- echo "*** you link to this library. But I can only do this if you have a" -- echo "*** shared version of the library, which you do not appear to have." -+ lib_linked=no - fi -- else -- # Add a -L argument. -- newdeplibs="$newdeplibs $a_deplib" -+ ;; -+ *) lib_linked=no ;; -+ esac -+ -+ if test "$lib_linked" != yes; then -+ func_fatal_configuration "unsupported hardcode properties" - fi -- done # Gone through all deplibs. -- ;; -- none | unknown | *) -- newdeplibs="" -- if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ -- -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | -- grep . >/dev/null; then -- echo -- if test "X$deplibs_check_method" = "Xnone"; then -- echo "*** Warning: inter-library dependencies are not supported in this platform." -+ -+ if test -n "$add_shlibpath"; then -+ case :$compile_shlibpath: in -+ *":$add_shlibpath:"*) ;; -+ *) func_append compile_shlibpath "$add_shlibpath:" ;; -+ esac -+ fi -+ if test "$linkmode" = prog; then -+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" -+ test -n "$add" && compile_deplibs="$add $compile_deplibs" - else -- echo "*** Warning: inter-library dependencies are not known to be supported." -+ test -n "$add_dir" && deplibs="$add_dir $deplibs" -+ test -n "$add" && deplibs="$add $deplibs" -+ if test "$hardcode_direct" != yes && -+ test "$hardcode_minus_L" != yes && -+ test "$hardcode_shlibpath_var" = yes; then -+ case :$finalize_shlibpath: in -+ *":$libdir:"*) ;; -+ *) func_append finalize_shlibpath "$libdir:" ;; -+ esac -+ fi - fi -- echo "*** All declared inter-library dependencies are being dropped." -- droppeddeps=yes - fi -- ;; -- esac -- versuffix=$versuffix_save -- major=$major_save -- release=$release_save -- libname=$libname_save -- name=$name_save -- -- case $host in -- *-*-rhapsody* | *-*-darwin1.[012]) -- # On Rhapsody replace the C library is the System framework -- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` -- ;; -- esac - -- if test "$droppeddeps" = yes; then -- if test "$module" = yes; then -- echo -- echo "*** Warning: libtool could not satisfy all declared inter-library" -- echo "*** dependencies of module $libname. Therefore, libtool will create" -- echo "*** a static module, that should work as long as the dlopening" -- echo "*** application is linked with the -dlopen flag." -- if test -z "$global_symbol_pipe"; then -- echo -- echo "*** However, this would only work if libtool was able to extract symbol" -- echo "*** lists from a program, using \`nm' or equivalent, but libtool could" -- echo "*** not find such a program. So, this module is probably useless." -- echo "*** \`nm' from GNU binutils and a full rebuild may help." -+ if test "$linkmode" = prog || test "$opt_mode" = relink; then -+ add_shlibpath= -+ add_dir= -+ add= -+ # Finalize command for both is simple: just hardcode it. -+ if test "$hardcode_direct" = yes && -+ test "$hardcode_direct_absolute" = no; then -+ add="$libdir/$linklib" -+ elif test "$hardcode_minus_L" = yes; then -+ add_dir="-L$libdir" -+ add="-l$name" -+ elif test "$hardcode_shlibpath_var" = yes; then -+ case :$finalize_shlibpath: in -+ *":$libdir:"*) ;; -+ *) func_append finalize_shlibpath "$libdir:" ;; -+ esac -+ add="-l$name" -+ elif test "$hardcode_automatic" = yes; then -+ if test -n "$inst_prefix_dir" && -+ test -f "$inst_prefix_dir$libdir/$linklib" ; then -+ add="$inst_prefix_dir$libdir/$linklib" -+ else -+ add="$libdir/$linklib" -+ fi -+ else -+ # We cannot seem to hardcode it, guess we'll fake it. -+ add_dir="-L$libdir" -+ # Try looking first in the location we're being installed to. -+ if test -n "$inst_prefix_dir"; then -+ case $libdir in -+ [\\/]*) -+ func_append add_dir " -L$inst_prefix_dir$libdir" -+ ;; -+ esac -+ fi -+ add="-l$name" - fi -- if test "$build_old_libs" = no; then -- oldlibs="$output_objdir/$libname.$libext" -- build_libtool_libs=module -- build_old_libs=yes -+ -+ if test "$linkmode" = prog; then -+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" -+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs" - else -- build_libtool_libs=no -+ test -n "$add_dir" && deplibs="$add_dir $deplibs" -+ test -n "$add" && deplibs="$add $deplibs" - fi -+ fi -+ elif test "$linkmode" = prog; then -+ # Here we assume that one of hardcode_direct or hardcode_minus_L -+ # is not unsupported. This is valid on all known static and -+ # shared platforms. -+ if test "$hardcode_direct" != unsupported; then -+ test -n "$old_library" && linklib="$old_library" -+ compile_deplibs="$dir/$linklib $compile_deplibs" -+ finalize_deplibs="$dir/$linklib $finalize_deplibs" - else -- echo "*** The inter-library dependencies that have been dropped here will be" -- echo "*** automatically added whenever a program is linked with this library" -- echo "*** or is declared to -dlopen it." -+ compile_deplibs="-l$name -L$dir $compile_deplibs" -+ finalize_deplibs="-l$name -L$dir $finalize_deplibs" -+ fi -+ elif test "$build_libtool_libs" = yes; then -+ # Not a shared library -+ if test "$deplibs_check_method" != pass_all; then -+ # We're trying link a shared library against a static one -+ # but the system doesn't support it. - -- if test $allow_undefined = no; then -- echo -- echo "*** Since this library must not contain undefined symbols," -- echo "*** because either the platform does not support them or" -- echo "*** it was explicitly requested with -no-undefined," -- echo "*** libtool will only create a static version of it." -+ # Just print a warning and add the library to dependency_libs so -+ # that the program can be linked against the static library. -+ echo -+ $ECHO "*** Warning: This system can not link to static lib archive $lib." -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which you do not appear to have." -+ if test "$module" = yes; then -+ echo "*** But as you try to build a module library, libtool will still create " -+ echo "*** a static module, that should work as long as the dlopening application" -+ echo "*** is linked with the -dlopen flag to resolve symbols at runtime." -+ if test -z "$global_symbol_pipe"; then -+ echo -+ echo "*** However, this would only work if libtool was able to extract symbol" -+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could" -+ echo "*** not find such a program. So, this module is probably useless." -+ echo "*** \`nm' from GNU binutils and a full rebuild may help." -+ fi - if test "$build_old_libs" = no; then -- oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi -+ else -+ deplibs="$dir/$old_library $deplibs" -+ link_static=yes - fi -- fi -- # Done checking deplibs! -- deplibs=$newdeplibs -- fi -+ fi # link shared/static library? - -- # All the library-specific variables (install_libdir is set above). -- library_names= -- old_library= -- dlname= -+ if test "$linkmode" = lib; then -+ if test -n "$dependency_libs" && -+ { test "$hardcode_into_libs" != yes || -+ test "$build_old_libs" = yes || -+ test "$link_static" = yes; }; then -+ # Extract -R from dependency_libs -+ temp_deplibs= -+ for libdir in $dependency_libs; do -+ case $libdir in -+ -R*) func_stripname '-R' '' "$libdir" -+ temp_xrpath=$func_stripname_result -+ case " $xrpath " in -+ *" $temp_xrpath "*) ;; -+ *) func_append xrpath " $temp_xrpath";; -+ esac;; -+ *) func_append temp_deplibs " $libdir";; -+ esac -+ done -+ dependency_libs="$temp_deplibs" -+ fi - -- # Test again, we may have decided not to build it any more -- if test "$build_libtool_libs" = yes; then -- if test $hardcode_into_libs = yes; then -- # Hardcode the library paths -- hardcode_libdirs= -- dep_rpath= -- rpath="$finalize_rpath" -- test "$mode" != relink && rpath="$compile_rpath$rpath" -- for libdir in $rpath; do -- if test -n "$hardcode_libdir_flag_spec"; then -- if test -n "$hardcode_libdir_separator"; then -- if test -z "$hardcode_libdirs"; then -- hardcode_libdirs="$libdir" -+ func_append newlib_search_path " $absdir" -+ # Link against this library -+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" -+ # ... and its dependency_libs -+ tmp_libs= -+ for deplib in $dependency_libs; do -+ newdependency_libs="$deplib $newdependency_libs" -+ case $deplib in -+ -L*) func_stripname '-L' '' "$deplib" -+ func_resolve_sysroot "$func_stripname_result";; -+ *) func_resolve_sysroot "$deplib" ;; -+ esac -+ if $opt_preserve_dup_deps ; then -+ case "$tmp_libs " in -+ *" $func_resolve_sysroot_result "*) -+ func_append specialdeplibs " $func_resolve_sysroot_result" ;; -+ esac -+ fi -+ func_append tmp_libs " $func_resolve_sysroot_result" -+ done -+ -+ if test "$link_all_deplibs" != no; then -+ # Add the search paths of all dependency libraries -+ for deplib in $dependency_libs; do -+ path= -+ case $deplib in -+ -L*) path="$deplib" ;; -+ *.la) -+ func_resolve_sysroot "$deplib" -+ deplib=$func_resolve_sysroot_result -+ func_dirname "$deplib" "" "." -+ dir=$func_dirname_result -+ # We need an absolute path. -+ case $dir in -+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; -+ *) -+ absdir=`cd "$dir" && pwd` -+ if test -z "$absdir"; then -+ func_warning "cannot determine absolute directory name of \`$dir'" -+ absdir="$dir" -+ fi -+ ;; -+ esac -+ if $GREP "^installed=no" $deplib > /dev/null; then -+ case $host in -+ *-*-darwin*) -+ depdepl= -+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` -+ if test -n "$deplibrary_names" ; then -+ for tmp in $deplibrary_names ; do -+ depdepl=$tmp -+ done -+ if test -f "$absdir/$objdir/$depdepl" ; then -+ depdepl="$absdir/$objdir/$depdepl" -+ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` -+ if test -z "$darwin_install_name"; then -+ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` -+ fi -+ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" -+ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" -+ path= -+ fi -+ fi -+ ;; -+ *) -+ path="-L$absdir/$objdir" -+ ;; -+ esac - else -- # Just accumulate the unique libdirs. -- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -- ;; -- *) -- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -- ;; -- esac -+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` -+ test -z "$libdir" && \ -+ func_fatal_error "\`$deplib' is not a valid libtool archive" -+ test "$absdir" != "$libdir" && \ -+ func_warning "\`$deplib' seems to be moved" -+ -+ path="-L$absdir" - fi -- else -- eval flag=\"$hardcode_libdir_flag_spec\" -- dep_rpath="$dep_rpath $flag" -- fi -- elif test -n "$runpath_var"; then -- case "$perm_rpath " in -- *" $libdir "*) ;; -- *) perm_rpath="$perm_rpath $libdir" ;; -+ ;; -+ esac -+ case " $deplibs " in -+ *" $path "*) ;; -+ *) deplibs="$path $deplibs" ;; -+ esac -+ done -+ fi # link_all_deplibs != no -+ fi # linkmode = lib -+ done # for deplib in $libs -+ if test "$pass" = link; then -+ if test "$linkmode" = "prog"; then -+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs" -+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" -+ else -+ compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` -+ fi -+ fi -+ dependency_libs="$newdependency_libs" -+ if test "$pass" = dlpreopen; then -+ # Link the dlpreopened libraries before other libraries -+ for deplib in $save_deplibs; do -+ deplibs="$deplib $deplibs" -+ done -+ fi -+ if test "$pass" != dlopen; then -+ if test "$pass" != conv; then -+ # Make sure lib_search_path contains only unique directories. -+ lib_search_path= -+ for dir in $newlib_search_path; do -+ case "$lib_search_path " in -+ *" $dir "*) ;; -+ *) func_append lib_search_path " $dir" ;; -+ esac -+ done -+ newlib_search_path= -+ fi -+ -+ if test "$linkmode,$pass" != "prog,link"; then -+ vars="deplibs" -+ else -+ vars="compile_deplibs finalize_deplibs" -+ fi -+ for var in $vars dependency_libs; do -+ # Add libraries to $var in reverse order -+ eval tmp_libs=\"\$$var\" -+ new_libs= -+ for deplib in $tmp_libs; do -+ # FIXME: Pedantically, this is the right thing to do, so -+ # that some nasty dependency loop isn't accidentally -+ # broken: -+ #new_libs="$deplib $new_libs" -+ # Pragmatically, this seems to cause very few problems in -+ # practice: -+ case $deplib in -+ -L*) new_libs="$deplib $new_libs" ;; -+ -R*) ;; -+ *) -+ # And here is the reason: when a library appears more -+ # than once as an explicit dependence of a library, or -+ # is implicitly linked in more than once by the -+ # compiler, it is considered special, and multiple -+ # occurrences thereof are not removed. Compare this -+ # with having the same library being listed as a -+ # dependency of multiple other libraries: in this case, -+ # we know (pedantically, we assume) the library does not -+ # need to be listed more than once, so we keep only the -+ # last copy. This is not always right, but it is rare -+ # enough that we require users that really mean to play -+ # such unportable linking tricks to link the library -+ # using -Wl,-lname, so that libtool does not consider it -+ # for duplicate removal. -+ case " $specialdeplibs " in -+ *" $deplib "*) new_libs="$deplib $new_libs" ;; -+ *) -+ case " $new_libs " in -+ *" $deplib "*) ;; -+ *) new_libs="$deplib $new_libs" ;; -+ esac -+ ;; -+ esac -+ ;; -+ esac -+ done -+ tmp_libs= -+ for deplib in $new_libs; do -+ case $deplib in -+ -L*) -+ case " $tmp_libs " in -+ *" $deplib "*) ;; -+ *) func_append tmp_libs " $deplib" ;; - esac -- fi -+ ;; -+ *) func_append tmp_libs " $deplib" ;; -+ esac - done -- # Substitute the hardcoded libdirs into the rpath. -- if test -n "$hardcode_libdir_separator" && -- test -n "$hardcode_libdirs"; then -- libdir="$hardcode_libdirs" -- eval dep_rpath=\"$hardcode_libdir_flag_spec\" -- fi -- if test -n "$runpath_var" && test -n "$perm_rpath"; then -- # We should set the runpath_var. -- rpath= -- for dir in $perm_rpath; do -- rpath="$rpath$dir:" -- done -- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" -- fi -- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" -+ eval $var=\"$tmp_libs\" -+ done # for var -+ fi -+ # Last step: remove runtime libs from dependency_libs -+ # (they stay in deplibs) -+ tmp_libs= -+ for i in $dependency_libs ; do -+ case " $predeps $postdeps $compiler_lib_search_path " in -+ *" $i "*) -+ i="" -+ ;; -+ esac -+ if test -n "$i" ; then -+ func_append tmp_libs " $i" - fi -+ done -+ dependency_libs=$tmp_libs -+ done # for pass -+ if test "$linkmode" = prog; then -+ dlfiles="$newdlfiles" -+ fi -+ if test "$linkmode" = prog || test "$linkmode" = lib; then -+ dlprefiles="$newdlprefiles" -+ fi - -- shlibpath="$finalize_shlibpath" -- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" -- if test -n "$shlibpath"; then -- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" -- fi -+ case $linkmode in -+ oldlib) -+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -+ func_warning "\`-dlopen' is ignored for archives" -+ fi - -- # Get the real and link names of the library. -- eval library_names=\"$library_names_spec\" -- set dummy $library_names -- realname="$2" -- shift; shift -+ case " $deplibs" in -+ *\ -l* | *\ -L*) -+ func_warning "\`-l' and \`-L' are ignored for archives" ;; -+ esac - -- if test -n "$soname_spec"; then -- eval soname=\"$soname_spec\" -- else -- soname="$realname" -- fi -- test -z "$dlname" && dlname=$soname -+ test -n "$rpath" && \ -+ func_warning "\`-rpath' is ignored for archives" - -- lib="$output_objdir/$realname" -- for link -- do -- linknames="$linknames $link" -- done -+ test -n "$xrpath" && \ -+ func_warning "\`-R' is ignored for archives" - -- # Ensure that we have .o objects for linkers which dislike .lo -- # (e.g. aix) in case we are running --disable-static -- for obj in $libobjs; do -- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` -- if test "X$xdir" = "X$obj"; then -- xdir="." -- else -- xdir="$xdir" -- fi -- baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` -- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` -- if test ! -f $xdir/$oldobj; then -- $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" -- $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? -- fi -- done -+ test -n "$vinfo" && \ -+ func_warning "\`-version-info/-version-number' is ignored for archives" - -- # Use standard objects if they are pic -- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ test -n "$release" && \ -+ func_warning "\`-release' is ignored for archives" - -- # Prepare the list of exported symbols -- if test -z "$export_symbols"; then -- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then -- $show "generating symbol list for \`$libname.la'" -- export_symbols="$output_objdir/$libname.exp" -- $run $rm $export_symbols -- eval cmds=\"$export_symbols_cmds\" -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -- IFS="$save_ifs" -- if test -n "$export_symbols_regex"; then -- $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" -- $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' -- $show "$mv \"${export_symbols}T\" \"$export_symbols\"" -- $run eval '$mv "${export_symbols}T" "$export_symbols"' -- fi -- fi -+ test -n "$export_symbols$export_symbols_regex" && \ -+ func_warning "\`-export-symbols' is ignored for archives" -+ -+ # Now set the variables for building old libraries. -+ build_libtool_libs=no -+ oldlibs="$output" -+ func_append objs "$old_deplibs" -+ ;; -+ -+ lib) -+ # Make sure we only generate libraries of the form `libNAME.la'. -+ case $outputname in -+ lib*) -+ func_stripname 'lib' '.la' "$outputname" -+ name=$func_stripname_result -+ eval shared_ext=\"$shrext_cmds\" -+ eval libname=\"$libname_spec\" -+ ;; -+ *) -+ test "$module" = no && \ -+ func_fatal_help "libtool library \`$output' must begin with \`lib'" -+ -+ if test "$need_lib_prefix" != no; then -+ # Add the "lib" prefix for modules if required -+ func_stripname '' '.la' "$outputname" -+ name=$func_stripname_result -+ eval shared_ext=\"$shrext_cmds\" -+ eval libname=\"$libname_spec\" -+ else -+ func_stripname '' '.la' "$outputname" -+ libname=$func_stripname_result - fi -+ ;; -+ esac - -- if test -n "$export_symbols" && test -n "$include_expsyms"; then -- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' -+ if test -n "$objs"; then -+ if test "$deplibs_check_method" != pass_all; then -+ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" -+ else -+ echo -+ $ECHO "*** Warning: Linking the shared library $output against the non-libtool" -+ $ECHO "*** objects $objs is not portable!" -+ func_append libobjs " $objs" - fi -+ fi - -- if test -n "$convenience"; then -- if test -n "$whole_archive_flag_spec"; then -- eval libobjs=\"\$libobjs $whole_archive_flag_spec\" -- else -- gentop="$output_objdir/${outputname}x" -- $show "${rm}r $gentop" -- $run ${rm}r "$gentop" -- $show "mkdir $gentop" -- $run mkdir "$gentop" -- status=$? -- if test $status -ne 0 && test ! -d "$gentop"; then -- exit $status -- fi -- generated="$generated $gentop" -- -- for xlib in $convenience; do -- # Extract the objects. -- case $xlib in -- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; -- *) xabs=`pwd`"/$xlib" ;; -- esac -- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` -- xdir="$gentop/$xlib" -+ test "$dlself" != no && \ -+ func_warning "\`-dlopen self' is ignored for libtool libraries" - -- $show "${rm}r $xdir" -- $run ${rm}r "$xdir" -- $show "mkdir $xdir" -- $run mkdir "$xdir" -- status=$? -- if test $status -ne 0 && test ! -d "$xdir"; then -- exit $status -- fi -- $show "(cd $xdir && $AR x $xabs)" -- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? -+ set dummy $rpath -+ shift -+ test "$#" -gt 1 && \ -+ func_warning "ignoring multiple \`-rpath's for a libtool library" - -- libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` -- done -- fi -- fi -+ install_libdir="$1" - -- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then -- eval flag=\"$thread_safe_flag_spec\" -- linker_flags="$linker_flags $flag" -+ oldlibs= -+ if test -z "$rpath"; then -+ if test "$build_libtool_libs" = yes; then -+ # Building a libtool convenience library. -+ # Some compilers have problems with a `.al' extension so -+ # convenience libraries should have the same extension an -+ # archive normally would. -+ oldlibs="$output_objdir/$libname.$libext $oldlibs" -+ build_libtool_libs=convenience -+ build_old_libs=yes - fi - -- # Make a backup of the uninstalled library when relinking -- if test "$mode" = relink; then -- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? -- fi -+ test -n "$vinfo" && \ -+ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" - -- # Do each of the archive commands. -- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then -- eval cmds=\"$archive_expsym_cmds\" -- else -- eval cmds=\"$archive_cmds\" -- fi -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -+ test -n "$release" && \ -+ func_warning "\`-release' is ignored for convenience libraries" -+ else -+ -+ # Parse the version information argument. -+ save_ifs="$IFS"; IFS=':' -+ set dummy $vinfo 0 0 0 -+ shift - IFS="$save_ifs" - -- # Restore the uninstalled library and exit -- if test "$mode" = relink; then -- $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? -- exit 0 -- fi -+ test -n "$7" && \ -+ func_fatal_help "too many parameters to \`-version-info'" - -- # Create links to the real library. -- for linkname in $linknames; do -- if test "$realname" != "$linkname"; then -- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" -- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? -- fi -- done -+ # convert absolute version numbers to libtool ages -+ # this retains compatibility with .la files and attempts -+ # to make the code below a bit more comprehensible -+ -+ case $vinfo_number in -+ yes) -+ number_major="$1" -+ number_minor="$2" -+ number_revision="$3" -+ # -+ # There are really only two kinds -- those that -+ # use the current revision as the major version -+ # and those that subtract age and use age as -+ # a minor version. But, then there is irix -+ # which has an extra 1 added just for fun -+ # -+ case $version_type in -+ darwin|linux|osf|windows|none) -+ func_arith $number_major + $number_minor -+ current=$func_arith_result -+ age="$number_minor" -+ revision="$number_revision" -+ ;; -+ freebsd-aout|freebsd-elf|qnx|sunos) -+ current="$number_major" -+ revision="$number_minor" -+ age="0" -+ ;; -+ irix|nonstopux) -+ func_arith $number_major + $number_minor -+ current=$func_arith_result -+ age="$number_minor" -+ revision="$number_minor" -+ lt_irix_increment=no -+ ;; -+ *) -+ func_fatal_configuration "$modename: unknown library version type \`$version_type'" -+ ;; -+ esac -+ ;; -+ no) -+ current="$1" -+ revision="$2" -+ age="$3" -+ ;; -+ esac - -- # If -module or -export-dynamic was specified, set the dlname. -- if test "$module" = yes || test "$export_dynamic" = yes; then -- # On all known operating systems, these are identical. -- dlname="$soname" -- fi -- fi -- ;; -+ # Check that each of the things are valid numbers. -+ case $current in -+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; -+ *) -+ func_error "CURRENT \`$current' must be a nonnegative integer" -+ func_fatal_error "\`$vinfo' is not valid version information" -+ ;; -+ esac - -- obj) -- if test -n "$deplibs"; then -- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 -- fi -+ case $revision in -+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; -+ *) -+ func_error "REVISION \`$revision' must be a nonnegative integer" -+ func_fatal_error "\`$vinfo' is not valid version information" -+ ;; -+ esac - -- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 -- fi -+ case $age in -+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; -+ *) -+ func_error "AGE \`$age' must be a nonnegative integer" -+ func_fatal_error "\`$vinfo' is not valid version information" -+ ;; -+ esac - -- if test -n "$rpath"; then -- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 -- fi -+ if test "$age" -gt "$current"; then -+ func_error "AGE \`$age' is greater than the current interface number \`$current'" -+ func_fatal_error "\`$vinfo' is not valid version information" -+ fi - -- if test -n "$xrpath"; then -- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 -- fi -+ # Calculate the version variables. -+ major= -+ versuffix= -+ verstring= -+ case $version_type in -+ none) ;; - -- if test -n "$vinfo"; then -- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 -- fi -+ darwin) -+ # Like Linux, but with the current version available in -+ # verstring for coding it into the library header -+ func_arith $current - $age -+ major=.$func_arith_result -+ versuffix="$major.$age.$revision" -+ # Darwin ld doesn't like 0 for these options... -+ func_arith $current + 1 -+ minor_current=$func_arith_result -+ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" -+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" -+ ;; - -- if test -n "$release"; then -- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 -- fi -+ freebsd-aout) -+ major=".$current" -+ versuffix=".$current.$revision"; -+ ;; - -- case $output in -- *.lo) -- if test -n "$objs$old_deplibs"; then -- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 -- exit 1 -- fi -- libobj="$output" -- obj=`$echo "X$output" | $Xsed -e "$lo2o"` -- ;; -- *) -- libobj= -- obj="$output" -- ;; -- esac -+ freebsd-elf) -+ major=".$current" -+ versuffix=".$current" -+ ;; - -- # Delete the old objects. -- $run $rm $obj $libobj -+ irix | nonstopux) -+ if test "X$lt_irix_increment" = "Xno"; then -+ func_arith $current - $age -+ else -+ func_arith $current - $age + 1 -+ fi -+ major=$func_arith_result - -- # Objects from convenience libraries. This assumes -- # single-version convenience libraries. Whenever we create -- # different ones for PIC/non-PIC, this we'll have to duplicate -- # the extraction. -- reload_conv_objs= -- gentop= -- # reload_cmds runs $LD directly, so let us get rid of -- # -Wl from whole_archive_flag_spec -- wl= -+ case $version_type in -+ nonstopux) verstring_prefix=nonstopux ;; -+ *) verstring_prefix=sgi ;; -+ esac -+ verstring="$verstring_prefix$major.$revision" - -- if test -n "$convenience"; then -- if test -n "$whole_archive_flag_spec"; then -- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" -- else -- gentop="$output_objdir/${obj}x" -- $show "${rm}r $gentop" -- $run ${rm}r "$gentop" -- $show "mkdir $gentop" -- $run mkdir "$gentop" -- status=$? -- if test $status -ne 0 && test ! -d "$gentop"; then -- exit $status -- fi -- generated="$generated $gentop" -- -- for xlib in $convenience; do -- # Extract the objects. -- case $xlib in -- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; -- *) xabs=`pwd`"/$xlib" ;; -- esac -- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` -- xdir="$gentop/$xlib" -+ # Add in all the interfaces that we are compatible with. -+ loop=$revision -+ while test "$loop" -ne 0; do -+ func_arith $revision - $loop -+ iface=$func_arith_result -+ func_arith $loop - 1 -+ loop=$func_arith_result -+ verstring="$verstring_prefix$major.$iface:$verstring" -+ done - -- $show "${rm}r $xdir" -- $run ${rm}r "$xdir" -- $show "mkdir $xdir" -- $run mkdir "$xdir" -- status=$? -- if test $status -ne 0 && test ! -d "$xdir"; then -- exit $status -- fi -- $show "(cd $xdir && $AR x $xabs)" -- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? -+ # Before this point, $major must not contain `.'. -+ major=.$major -+ versuffix="$major.$revision" -+ ;; -+ -+ linux) -+ func_arith $current - $age -+ major=.$func_arith_result -+ versuffix="$major.$age.$revision" -+ ;; -+ -+ osf) -+ func_arith $current - $age -+ major=.$func_arith_result -+ versuffix=".$current.$age.$revision" -+ verstring="$current.$age.$revision" - -- reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` -+ # Add in all the interfaces that we are compatible with. -+ loop=$age -+ while test "$loop" -ne 0; do -+ func_arith $current - $loop -+ iface=$func_arith_result -+ func_arith $loop - 1 -+ loop=$func_arith_result -+ verstring="$verstring:${iface}.0" - done -- fi -- fi - -- # Create the old-style object. -- reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test -+ # Make executables depend on our current version. -+ func_append verstring ":${current}.0" -+ ;; - -- output="$obj" -- eval cmds=\"$reload_cmds\" -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -- IFS="$save_ifs" -+ qnx) -+ major=".$current" -+ versuffix=".$current" -+ ;; - -- # Exit if we aren't doing a library object file. -- if test -z "$libobj"; then -- if test -n "$gentop"; then -- $show "${rm}r $gentop" -- $run ${rm}r $gentop -- fi -+ sunos) -+ major=".$current" -+ versuffix=".$current.$revision" -+ ;; -+ -+ windows) -+ # Use '-' rather than '.', since we only want one -+ # extension on DOS 8.3 filesystems. -+ func_arith $current - $age -+ major=$func_arith_result -+ versuffix="-$major" -+ ;; - -- exit 0 -- fi -+ *) -+ func_fatal_configuration "unknown library version type \`$version_type'" -+ ;; -+ esac - -- if test "$build_libtool_libs" != yes; then -- if test -n "$gentop"; then -- $show "${rm}r $gentop" -- $run ${rm}r $gentop -+ # Clear the version info if we defaulted, and they specified a release. -+ if test -z "$vinfo" && test -n "$release"; then -+ major= -+ case $version_type in -+ darwin) -+ # we can't check for "0.0" in archive_cmds due to quoting -+ # problems, so we reset it completely -+ verstring= -+ ;; -+ *) -+ verstring="0.0" -+ ;; -+ esac -+ if test "$need_version" = no; then -+ versuffix= -+ else -+ versuffix=".0.0" -+ fi - fi - -- # Create an invalid libtool object if no PIC, so that we don't -- # accidentally link it into a program. -- $show "echo timestamp > $libobj" -- $run eval "echo timestamp > $libobj" || exit $? -- exit 0 -- fi -+ # Remove version info from name if versioning should be avoided -+ if test "$avoid_version" = yes && test "$need_version" = no; then -+ major= -+ versuffix= -+ verstring="" -+ fi - -- if test -n "$pic_flag" || test "$pic_mode" != default; then -- # Only do commands if we really have different PIC objects. -- reload_objs="$libobjs $reload_conv_objs" -- output="$libobj" -- eval cmds=\"$reload_cmds\" -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -- IFS="$save_ifs" -- else -- # Just create a symlink. -- $show $rm $libobj -- $run $rm $libobj -- xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` -- if test "X$xdir" = "X$libobj"; then -- xdir="." -+ # Check to see if the archive will have undefined symbols. -+ if test "$allow_undefined" = yes; then -+ if test "$allow_undefined_flag" = unsupported; then -+ func_warning "undefined symbols not allowed in $host shared libraries" -+ build_libtool_libs=no -+ build_old_libs=yes -+ fi - else -- xdir="$xdir" -+ # Don't allow undefined symbols. -+ allow_undefined_flag="$no_undefined_flag" - fi -- baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` -- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` -- $show "(cd $xdir && $LN_S $oldobj $baseobj)" -- $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? -- fi - -- if test -n "$gentop"; then -- $show "${rm}r $gentop" -- $run ${rm}r $gentop - fi - -- exit 0 -- ;; -- -- prog) -- case $host in -- *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;; -- esac -- if test -n "$vinfo"; then -- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 -+ func_generate_dlsyms "$libname" "$libname" "yes" -+ func_append libobjs " $symfileobj" -+ test "X$libobjs" = "X " && libobjs= -+ -+ if test "$opt_mode" != relink; then -+ # Remove our outputs, but don't remove object files since they -+ # may have been created when compiling PIC objects. -+ removelist= -+ tempremovelist=`$ECHO "$output_objdir/*"` -+ for p in $tempremovelist; do -+ case $p in -+ *.$objext | *.gcno) -+ ;; -+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) -+ if test "X$precious_files_regex" != "X"; then -+ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 -+ then -+ continue -+ fi -+ fi -+ func_append removelist " $p" -+ ;; -+ *) ;; -+ esac -+ done -+ test -n "$removelist" && \ -+ func_show_eval "${RM}r \$removelist" - fi - -- if test -n "$release"; then -- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 -- fi -+ # Now set the variables for building old libraries. -+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then -+ func_append oldlibs " $output_objdir/$libname.$libext" - -- if test "$preload" = yes; then -- if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && -- test "$dlopen_self_static" = unknown; then -- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." -- fi -+ # Transform .lo files to .o files. -+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` - fi - -- case $host in -- *-*-rhapsody* | *-*-darwin1.[012]) -- # On Rhapsody replace the C library is the System framework -- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` -- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` -- ;; -- esac -- -- compile_command="$compile_command $compile_deplibs" -- finalize_command="$finalize_command $finalize_deplibs" -+ # Eliminate all temporary directories. -+ #for path in $notinst_path; do -+ # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` -+ # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` -+ # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` -+ #done - -- if test -n "$rpath$xrpath"; then -+ if test -n "$xrpath"; then - # If the user specified any rpath flags, then add them. -- for libdir in $rpath $xrpath; do -- # This is the magic to use -rpath. -+ temp_xrpath= -+ for libdir in $xrpath; do -+ func_replace_sysroot "$libdir" -+ func_append temp_xrpath " -R$func_replace_sysroot_result" - case "$finalize_rpath " in - *" $libdir "*) ;; -- *) finalize_rpath="$finalize_rpath $libdir" ;; -+ *) func_append finalize_rpath " $libdir" ;; - esac - done -+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then -+ dependency_libs="$temp_xrpath $dependency_libs" -+ fi - fi - -- # Now hardcode the library paths -- rpath= -- hardcode_libdirs= -- for libdir in $compile_rpath $finalize_rpath; do -- if test -n "$hardcode_libdir_flag_spec"; then -- if test -n "$hardcode_libdir_separator"; then -- if test -z "$hardcode_libdirs"; then -- hardcode_libdirs="$libdir" -+ # Make sure dlfiles contains only unique files that won't be dlpreopened -+ old_dlfiles="$dlfiles" -+ dlfiles= -+ for lib in $old_dlfiles; do -+ case " $dlprefiles $dlfiles " in -+ *" $lib "*) ;; -+ *) func_append dlfiles " $lib" ;; -+ esac -+ done -+ -+ # Make sure dlprefiles contains only unique files -+ old_dlprefiles="$dlprefiles" -+ dlprefiles= -+ for lib in $old_dlprefiles; do -+ case "$dlprefiles " in -+ *" $lib "*) ;; -+ *) func_append dlprefiles " $lib" ;; -+ esac -+ done -+ -+ if test "$build_libtool_libs" = yes; then -+ if test -n "$rpath"; then -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) -+ # these systems don't actually have a c library (as such)! -+ ;; -+ *-*-rhapsody* | *-*-darwin1.[012]) -+ # Rhapsody C library is in the System framework -+ func_append deplibs " System.ltframework" -+ ;; -+ *-*-netbsd*) -+ # Don't link with libc until the a.out ld.so is fixed. -+ ;; -+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) -+ # Do not include libc due to us having libc/libc_r. -+ ;; -+ *-*-sco3.2v5* | *-*-sco5v6*) -+ # Causes problems with __ctype -+ ;; -+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) -+ # Compiler inserts libc in the correct place for threads to work -+ ;; -+ *) -+ # Add libc to deplibs on all other systems if necessary. -+ if test "$build_libtool_need_lc" = "yes"; then -+ func_append deplibs " -lc" -+ fi -+ ;; -+ esac -+ fi -+ -+ # Transform deplibs into only deplibs that can be linked in shared. -+ name_save=$name -+ libname_save=$libname -+ release_save=$release -+ versuffix_save=$versuffix -+ major_save=$major -+ # I'm not sure if I'm treating the release correctly. I think -+ # release should show up in the -l (ie -lgmp5) so we don't want to -+ # add it in twice. Is that correct? -+ release="" -+ versuffix="" -+ major="" -+ newdeplibs= -+ droppeddeps=no -+ case $deplibs_check_method in -+ pass_all) -+ # Don't check for shared/static. Everything works. -+ # This might be a little naive. We might want to check -+ # whether the library exists or not. But this is on -+ # osf3 & osf4 and I'm not really sure... Just -+ # implementing what was already the behavior. -+ newdeplibs=$deplibs -+ ;; -+ test_compile) -+ # This code stresses the "libraries are programs" paradigm to its -+ # limits. Maybe even breaks it. We compile a program, linking it -+ # against the deplibs as a proxy for the library. Then we can check -+ # whether they linked in statically or dynamically with ldd. -+ $opt_dry_run || $RM conftest.c -+ cat > conftest.c <<EOF -+ int main() { return 0; } -+EOF -+ $opt_dry_run || $RM conftest -+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then -+ ldd_output=`ldd conftest` -+ for i in $deplibs; do -+ case $i in -+ -l*) -+ func_stripname -l '' "$i" -+ name=$func_stripname_result -+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -+ case " $predeps $postdeps " in -+ *" $i "*) -+ func_append newdeplibs " $i" -+ i="" -+ ;; -+ esac -+ fi -+ if test -n "$i" ; then -+ libname=`eval "\\$ECHO \"$libname_spec\""` -+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` -+ set dummy $deplib_matches; shift -+ deplib_match=$1 -+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then -+ func_append newdeplibs " $i" -+ else -+ droppeddeps=yes -+ echo -+ $ECHO "*** Warning: dynamic linker does not accept needed library $i." -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which I believe you do not have" -+ echo "*** because a test_compile did reveal that the linker did not use it for" -+ echo "*** its dynamic dependency list that programs get resolved with at runtime." -+ fi -+ fi -+ ;; -+ *) -+ func_append newdeplibs " $i" -+ ;; -+ esac -+ done -+ else -+ # Error occurred in the first compile. Let's try to salvage -+ # the situation: Compile a separate program for each library. -+ for i in $deplibs; do -+ case $i in -+ -l*) -+ func_stripname -l '' "$i" -+ name=$func_stripname_result -+ $opt_dry_run || $RM conftest -+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then -+ ldd_output=`ldd conftest` -+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -+ case " $predeps $postdeps " in -+ *" $i "*) -+ func_append newdeplibs " $i" -+ i="" -+ ;; -+ esac -+ fi -+ if test -n "$i" ; then -+ libname=`eval "\\$ECHO \"$libname_spec\""` -+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` -+ set dummy $deplib_matches; shift -+ deplib_match=$1 -+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then -+ func_append newdeplibs " $i" -+ else -+ droppeddeps=yes -+ echo -+ $ECHO "*** Warning: dynamic linker does not accept needed library $i." -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which you do not appear to have" -+ echo "*** because a test_compile did reveal that the linker did not use this one" -+ echo "*** as a dynamic dependency that programs can get resolved with at runtime." -+ fi -+ fi -+ else -+ droppeddeps=yes -+ echo -+ $ECHO "*** Warning! Library $i is needed by this library but I was not able to" -+ echo "*** make it link in! You will probably need to install it or some" -+ echo "*** library that it depends on before this library will be fully" -+ echo "*** functional. Installing it before continuing would be even better." -+ fi -+ ;; -+ *) -+ func_append newdeplibs " $i" -+ ;; -+ esac -+ done -+ fi -+ ;; -+ file_magic*) -+ set dummy $deplibs_check_method; shift -+ file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` -+ for a_deplib in $deplibs; do -+ case $a_deplib in -+ -l*) -+ func_stripname -l '' "$a_deplib" -+ name=$func_stripname_result -+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -+ case " $predeps $postdeps " in -+ *" $a_deplib "*) -+ func_append newdeplibs " $a_deplib" -+ a_deplib="" -+ ;; -+ esac -+ fi -+ if test -n "$a_deplib" ; then -+ libname=`eval "\\$ECHO \"$libname_spec\""` -+ if test -n "$file_magic_glob"; then -+ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob` -+ else -+ libnameglob=$libname -+ fi -+ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob` -+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do -+ if test "$want_nocaseglob" = yes; then -+ shopt -s nocaseglob -+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` -+ $nocaseglob -+ else -+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` -+ fi -+ for potent_lib in $potential_libs; do -+ # Follow soft links. -+ if ls -lLd "$potent_lib" 2>/dev/null | -+ $GREP " -> " >/dev/null; then -+ continue -+ fi -+ # The statement above tries to avoid entering an -+ # endless loop below, in case of cyclic links. -+ # We might still enter an endless loop, since a link -+ # loop can be closed while we follow links, -+ # but so what? -+ potlib="$potent_lib" -+ while test -h "$potlib" 2>/dev/null; do -+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` -+ case $potliblink in -+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; -+ *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; -+ esac -+ done -+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | -+ $SED -e 10q | -+ $EGREP "$file_magic_regex" > /dev/null; then -+ func_append newdeplibs " $a_deplib" -+ a_deplib="" -+ break 2 -+ fi -+ done -+ done -+ fi -+ if test -n "$a_deplib" ; then -+ droppeddeps=yes -+ echo -+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib." -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which you do not appear to have" -+ echo "*** because I did check the linker path looking for a file starting" -+ if test -z "$potlib" ; then -+ $ECHO "*** with $libname but no candidates were found. (...for file magic test)" -+ else -+ $ECHO "*** with $libname and none of the candidates passed a file format test" -+ $ECHO "*** using a file magic. Last file checked: $potlib" -+ fi -+ fi -+ ;; -+ *) -+ # Add a -L argument. -+ func_append newdeplibs " $a_deplib" -+ ;; -+ esac -+ done # Gone through all deplibs. -+ ;; -+ match_pattern*) -+ set dummy $deplibs_check_method; shift -+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` -+ for a_deplib in $deplibs; do -+ case $a_deplib in -+ -l*) -+ func_stripname -l '' "$a_deplib" -+ name=$func_stripname_result -+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -+ case " $predeps $postdeps " in -+ *" $a_deplib "*) -+ func_append newdeplibs " $a_deplib" -+ a_deplib="" -+ ;; -+ esac -+ fi -+ if test -n "$a_deplib" ; then -+ libname=`eval "\\$ECHO \"$libname_spec\""` -+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do -+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` -+ for potent_lib in $potential_libs; do -+ potlib="$potent_lib" # see symlink-check above in file_magic test -+ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ -+ $EGREP "$match_pattern_regex" > /dev/null; then -+ func_append newdeplibs " $a_deplib" -+ a_deplib="" -+ break 2 -+ fi -+ done -+ done -+ fi -+ if test -n "$a_deplib" ; then -+ droppeddeps=yes -+ echo -+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib." -+ echo "*** I have the capability to make that library automatically link in when" -+ echo "*** you link to this library. But I can only do this if you have a" -+ echo "*** shared version of the library, which you do not appear to have" -+ echo "*** because I did check the linker path looking for a file starting" -+ if test -z "$potlib" ; then -+ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" -+ else -+ $ECHO "*** with $libname and none of the candidates passed a file format test" -+ $ECHO "*** using a regex pattern. Last file checked: $potlib" -+ fi -+ fi -+ ;; -+ *) -+ # Add a -L argument. -+ func_append newdeplibs " $a_deplib" -+ ;; -+ esac -+ done # Gone through all deplibs. -+ ;; -+ none | unknown | *) -+ newdeplibs="" -+ tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` -+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -+ for i in $predeps $postdeps ; do -+ # can't use Xsed below, because $i might contain '/' -+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` -+ done -+ fi -+ case $tmp_deplibs in -+ *[!\ \ ]*) -+ echo -+ if test "X$deplibs_check_method" = "Xnone"; then -+ echo "*** Warning: inter-library dependencies are not supported in this platform." - else -- # Just accumulate the unique libdirs. -- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -- ;; -- *) -- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -- ;; -- esac -+ echo "*** Warning: inter-library dependencies are not known to be supported." - fi -- else -- eval flag=\"$hardcode_libdir_flag_spec\" -- rpath="$rpath $flag" -- fi -- elif test -n "$runpath_var"; then -- case "$perm_rpath " in -- *" $libdir "*) ;; -- *) perm_rpath="$perm_rpath $libdir" ;; -+ echo "*** All declared inter-library dependencies are being dropped." -+ droppeddeps=yes -+ ;; - esac -- fi -+ ;; -+ esac -+ versuffix=$versuffix_save -+ major=$major_save -+ release=$release_save -+ libname=$libname_save -+ name=$name_save -+ - case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) -- case :$dllsearchpath: in -- *":$libdir:"*) ;; -- *) dllsearchpath="$dllsearchpath:$libdir";; -- esac -+ *-*-rhapsody* | *-*-darwin1.[012]) -+ # On Rhapsody replace the C library with the System framework -+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` - ;; - esac -- done -- # Substitute the hardcoded libdirs into the rpath. -- if test -n "$hardcode_libdir_separator" && -- test -n "$hardcode_libdirs"; then -- libdir="$hardcode_libdirs" -- eval rpath=\" $hardcode_libdir_flag_spec\" -- fi -- compile_rpath="$rpath" - -- rpath= -- hardcode_libdirs= -- for libdir in $finalize_rpath; do -- if test -n "$hardcode_libdir_flag_spec"; then -- if test -n "$hardcode_libdir_separator"; then -- if test -z "$hardcode_libdirs"; then -- hardcode_libdirs="$libdir" -+ if test "$droppeddeps" = yes; then -+ if test "$module" = yes; then -+ echo -+ echo "*** Warning: libtool could not satisfy all declared inter-library" -+ $ECHO "*** dependencies of module $libname. Therefore, libtool will create" -+ echo "*** a static module, that should work as long as the dlopening" -+ echo "*** application is linked with the -dlopen flag." -+ if test -z "$global_symbol_pipe"; then -+ echo -+ echo "*** However, this would only work if libtool was able to extract symbol" -+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could" -+ echo "*** not find such a program. So, this module is probably useless." -+ echo "*** \`nm' from GNU binutils and a full rebuild may help." -+ fi -+ if test "$build_old_libs" = no; then -+ oldlibs="$output_objdir/$libname.$libext" -+ build_libtool_libs=module -+ build_old_libs=yes - else -- # Just accumulate the unique libdirs. -- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -- ;; -- *) -- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -- ;; -- esac -+ build_libtool_libs=no - fi - else -- eval flag=\"$hardcode_libdir_flag_spec\" -- rpath="$rpath $flag" -- fi -- elif test -n "$runpath_var"; then -- case "$finalize_perm_rpath " in -- *" $libdir "*) ;; -- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; -- esac -- fi -- done -- # Substitute the hardcoded libdirs into the rpath. -- if test -n "$hardcode_libdir_separator" && -- test -n "$hardcode_libdirs"; then -- libdir="$hardcode_libdirs" -- eval rpath=\" $hardcode_libdir_flag_spec\" -- fi -- finalize_rpath="$rpath" -- -- if test -n "$libobjs" && test "$build_old_libs" = yes; then -- # Transform all the library objects into standard objects. -- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -- fi -+ echo "*** The inter-library dependencies that have been dropped here will be" -+ echo "*** automatically added whenever a program is linked with this library" -+ echo "*** or is declared to -dlopen it." - -- dlsyms= -- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -- if test -n "$NM" && test -n "$global_symbol_pipe"; then -- dlsyms="${outputname}S.c" -- else -- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 -+ if test "$allow_undefined" = no; then -+ echo -+ echo "*** Since this library must not contain undefined symbols," -+ echo "*** because either the platform does not support them or" -+ echo "*** it was explicitly requested with -no-undefined," -+ echo "*** libtool will only create a static version of it." -+ if test "$build_old_libs" = no; then -+ oldlibs="$output_objdir/$libname.$libext" -+ build_libtool_libs=module -+ build_old_libs=yes -+ else -+ build_libtool_libs=no -+ fi -+ fi -+ fi - fi -+ # Done checking deplibs! -+ deplibs=$newdeplibs - fi -+ # Time to change all our "foo.ltframework" stuff back to "-framework foo" -+ case $host in -+ *-*-darwin*) -+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` -+ new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` -+ deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` -+ ;; -+ esac - -- if test -n "$dlsyms"; then -- case $dlsyms in -- "") ;; -- *.c) -- # Discover the nlist of each of the dlfiles. -- nlist="$output_objdir/${outputname}.nm" -- -- $show "$rm $nlist ${nlist}S ${nlist}T" -- $run $rm "$nlist" "${nlist}S" "${nlist}T" -- -- # Parse the name list into a source file. -- $show "creating $output_objdir/$dlsyms" -- -- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ --/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ --/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ -- --#ifdef __cplusplus --extern \"C\" { --#endif -- --/* Prevent the only kind of declaration conflicts we can make. */ --#define lt_preloaded_symbols some_other_symbol -- --/* External symbol declarations for the compiler. */\ --" -- -- if test "$dlself" = yes; then -- $show "generating symbol list for \`$output'" -- -- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" -- -- # Add our own program objects to the symbol list. -- progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -- for arg in $progfiles; do -- $show "extracting global C symbols from \`$arg'" -- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" -- done -- -- if test -n "$exclude_expsyms"; then -- $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' -- $run eval '$mv "$nlist"T "$nlist"' -- fi -+ # move library search paths that coincide with paths to not yet -+ # installed libraries to the beginning of the library search list -+ new_libs= -+ for path in $notinst_path; do -+ case " $new_libs " in -+ *" -L$path/$objdir "*) ;; -+ *) -+ case " $deplibs " in -+ *" -L$path/$objdir "*) -+ func_append new_libs " -L$path/$objdir" ;; -+ esac -+ ;; -+ esac -+ done -+ for deplib in $deplibs; do -+ case $deplib in -+ -L*) -+ case " $new_libs " in -+ *" $deplib "*) ;; -+ *) func_append new_libs " $deplib" ;; -+ esac -+ ;; -+ *) func_append new_libs " $deplib" ;; -+ esac -+ done -+ deplibs="$new_libs" - -- if test -n "$export_symbols_regex"; then -- $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' -- $run eval '$mv "$nlist"T "$nlist"' -- fi -+ # All the library-specific variables (install_libdir is set above). -+ library_names= -+ old_library= -+ dlname= - -- # Prepare the list of exported symbols -- if test -z "$export_symbols"; then -- export_symbols="$output_objdir/$output.exp" -- $run $rm $export_symbols -- $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' -- else -- $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' -- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' -- $run eval 'mv "$nlist"T "$nlist"' -+ # Test again, we may have decided not to build it any more -+ if test "$build_libtool_libs" = yes; then -+ if test "$hardcode_into_libs" = yes; then -+ # Hardcode the library paths -+ hardcode_libdirs= -+ dep_rpath= -+ rpath="$finalize_rpath" -+ test "$opt_mode" != relink && rpath="$compile_rpath$rpath" -+ for libdir in $rpath; do -+ if test -n "$hardcode_libdir_flag_spec"; then -+ if test -n "$hardcode_libdir_separator"; then -+ func_replace_sysroot "$libdir" -+ libdir=$func_replace_sysroot_result -+ if test -z "$hardcode_libdirs"; then -+ hardcode_libdirs="$libdir" -+ else -+ # Just accumulate the unique libdirs. -+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -+ ;; -+ *) -+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" -+ ;; -+ esac -+ fi -+ else -+ eval flag=\"$hardcode_libdir_flag_spec\" -+ func_append dep_rpath " $flag" -+ fi -+ elif test -n "$runpath_var"; then -+ case "$perm_rpath " in -+ *" $libdir "*) ;; -+ *) func_apped perm_rpath " $libdir" ;; -+ esac - fi -- fi -- -- for arg in $dlprefiles; do -- $show "extracting global C symbols from \`$arg'" -- name=`echo "$arg" | sed -e 's%^.*/%%'` -- $run eval 'echo ": $name " >> "$nlist"' -- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done -- -- if test -z "$run"; then -- # Make sure we have at least an empty file. -- test -f "$nlist" || : > "$nlist" -- -- if test -n "$exclude_expsyms"; then -- egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T -- $mv "$nlist"T "$nlist" -- fi -- -- # Try sorting and uniquifying the output. -- if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then -- : -- else -- grep -v "^: " < "$nlist" > "$nlist"S -- fi -- -- if test -f "$nlist"S; then -- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' -+ # Substitute the hardcoded libdirs into the rpath. -+ if test -n "$hardcode_libdir_separator" && -+ test -n "$hardcode_libdirs"; then -+ libdir="$hardcode_libdirs" -+ if test -n "$hardcode_libdir_flag_spec_ld"; then -+ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" - else -- echo '/* NONE */' >> "$output_objdir/$dlsyms" -+ eval dep_rpath=\"$hardcode_libdir_flag_spec\" - fi -- -- $echo >> "$output_objdir/$dlsyms" "\ -- --#undef lt_preloaded_symbols -- --#if defined (__STDC__) && __STDC__ --# define lt_ptr void * --#else --# define lt_ptr char * --# define const --#endif -- --/* The mapping between symbol names and symbols. */ --const struct { -- const char *name; -- lt_ptr address; --} --lt_preloaded_symbols[] = --{\ --" -- -- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" -- -- $echo >> "$output_objdir/$dlsyms" "\ -- {0, (lt_ptr) 0} --}; -- --/* This works around a problem in FreeBSD linker */ --#ifdef FREEBSD_WORKAROUND --static const void *lt_preloaded_setup() { -- return lt_preloaded_symbols; --} --#endif -- --#ifdef __cplusplus --} --#endif\ --" - fi -+ if test -n "$runpath_var" && test -n "$perm_rpath"; then -+ # We should set the runpath_var. -+ rpath= -+ for dir in $perm_rpath; do -+ func_append rpath "$dir:" -+ done -+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" -+ fi -+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" -+ fi - -- pic_flag_for_symtable= -- case $host in -- # compiling the symbol table file with pic_flag works around -- # a FreeBSD bug that causes programs to crash when -lm is -- # linked before any other PIC object. But we must not use -- # pic_flag when linking with -static. The problem exists in -- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. -- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) -- case "$compile_command " in -- *" -static "*) ;; -- *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; -- esac;; -- *-*-hpux*) -- case "$compile_command " in -- *" -static "*) ;; -- *) pic_flag_for_symtable=" $pic_flag -DPIC";; -- esac -- esac -+ shlibpath="$finalize_shlibpath" -+ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" -+ if test -n "$shlibpath"; then -+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" -+ fi -+ -+ # Get the real and link names of the library. -+ eval shared_ext=\"$shrext_cmds\" -+ eval library_names=\"$library_names_spec\" -+ set dummy $library_names -+ shift -+ realname="$1" -+ shift - -- # Now compile the dynamic symbol file. -- $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" -- $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? -- -- # Clean up the generated files. -- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" -- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" -- -- # Transform the symbol file into the correct name. -- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` -- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` -- ;; -- *) -- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 -- exit 1 -- ;; -- esac -- else -- # We keep going just in case the user didn't refer to -- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe -- # really was required. -+ if test -n "$soname_spec"; then -+ eval soname=\"$soname_spec\" -+ else -+ soname="$realname" -+ fi -+ if test -z "$dlname"; then -+ dlname=$soname -+ fi - -- # Nullify the symbol file. -- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` -- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` -- fi -+ lib="$output_objdir/$realname" -+ linknames= -+ for link -+ do -+ func_append linknames " $link" -+ done - -- if test $need_relink = no || test "$build_libtool_libs" != yes; then -- # Replace the output file specification. -- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` -- link_command="$compile_command$compile_rpath" -+ # Use standard objects if they are pic -+ test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` -+ test "X$libobjs" = "X " && libobjs= - -- # We have no uninstalled library dependencies, so finalize right now. -- $show "$link_command" -- $run eval "$link_command" -- status=$? -+ delfiles= -+ if test -n "$export_symbols" && test -n "$include_expsyms"; then -+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" -+ export_symbols="$output_objdir/$libname.uexp" -+ func_append delfiles " $export_symbols" -+ fi -+ -+ orig_export_symbols= -+ case $host_os in -+ cygwin* | mingw* | cegcc*) -+ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then -+ # exporting using user supplied symfile -+ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then -+ # and it's NOT already a .def file. Must figure out -+ # which of the given symbols are data symbols and tag -+ # them as such. So, trigger use of export_symbols_cmds. -+ # export_symbols gets reassigned inside the "prepare -+ # the list of exported symbols" if statement, so the -+ # include_expsyms logic still works. -+ orig_export_symbols="$export_symbols" -+ export_symbols= -+ always_export_symbols=yes -+ fi -+ fi -+ ;; -+ esac - -- # Delete the generated files. -- if test -n "$dlsyms"; then -- $show "$rm $output_objdir/${outputname}S.${objext}" -- $run $rm "$output_objdir/${outputname}S.${objext}" -+ # Prepare the list of exported symbols -+ if test -z "$export_symbols"; then -+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then -+ func_verbose "generating symbol list for \`$libname.la'" -+ export_symbols="$output_objdir/$libname.exp" -+ $opt_dry_run || $RM $export_symbols -+ cmds=$export_symbols_cmds -+ save_ifs="$IFS"; IFS='~' -+ for cmd1 in $cmds; do -+ IFS="$save_ifs" -+ # Take the normal branch if the nm_file_list_spec branch -+ # doesn't work or if tool conversion is not needed. -+ case $nm_file_list_spec~$to_tool_file_cmd in -+ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) -+ try_normal_branch=yes -+ eval cmd=\"$cmd1\" -+ func_len " $cmd" -+ len=$func_len_result -+ ;; -+ *) -+ try_normal_branch=no -+ ;; -+ esac -+ if test "$try_normal_branch" = yes \ -+ && { test "$len" -lt "$max_cmd_len" \ -+ || test "$max_cmd_len" -le -1; } -+ then -+ func_show_eval "$cmd" 'exit $?' -+ skipped_export=false -+ elif test -n "$nm_file_list_spec"; then -+ func_basename "$output" -+ output_la=$func_basename_result -+ save_libobjs=$libobjs -+ save_output=$output -+ output=${output_objdir}/${output_la}.nm -+ func_to_tool_file "$output" -+ libobjs=$nm_file_list_spec$func_to_tool_file_result -+ func_append delfiles " $output" -+ func_verbose "creating $NM input file list: $output" -+ for obj in $save_libobjs; do -+ func_to_tool_file "$obj" -+ $ECHO "$func_to_tool_file_result" -+ done > "$output" -+ eval cmd=\"$cmd1\" -+ func_show_eval "$cmd" 'exit $?' -+ output=$save_output -+ libobjs=$save_libobjs -+ skipped_export=false -+ else -+ # The command line is too long to execute in one step. -+ func_verbose "using reloadable object file for export list..." -+ skipped_export=: -+ # Break out early, otherwise skipped_export may be -+ # set to false by a later but shorter cmd. -+ break -+ fi -+ done -+ IFS="$save_ifs" -+ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then -+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' -+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"' -+ fi -+ fi - fi - -- exit $status -- fi -- -- if test -n "$shlibpath_var"; then -- # We should set the shlibpath_var -- rpath= -- for dir in $temp_rpath; do -- case $dir in -- [\\/]* | [A-Za-z]:[\\/]*) -- # Absolute path. -- rpath="$rpath$dir:" -- ;; -+ if test -n "$export_symbols" && test -n "$include_expsyms"; then -+ tmp_export_symbols="$export_symbols" -+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" -+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' -+ fi -+ -+ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then -+ # The given exports_symbols file has to be filtered, so filter it. -+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" -+ # FIXME: $output_objdir/$libname.filter potentially contains lots of -+ # 's' commands which not all seds can handle. GNU sed should be fine -+ # though. Also, the filter scales superlinearly with the number of -+ # global variables. join(1) would be nice here, but unfortunately -+ # isn't a blessed tool. -+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter -+ func_append delfiles " $export_symbols $output_objdir/$libname.filter" -+ export_symbols=$output_objdir/$libname.def -+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols -+ fi -+ -+ tmp_deplibs= -+ for test_deplib in $deplibs; do -+ case " $convenience " in -+ *" $test_deplib "*) ;; - *) -- # Relative path: add a thisdir entry. -- rpath="$rpath\$thisdir/$dir:" -+ func_append tmp_deplibs " $test_deplib" - ;; - esac - done -- temp_rpath="$rpath" -- fi -+ deplibs="$tmp_deplibs" - -- if test -n "$compile_shlibpath$finalize_shlibpath"; then -- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" -- fi -- if test -n "$finalize_shlibpath"; then -- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" -- fi -+ if test -n "$convenience"; then -+ if test -n "$whole_archive_flag_spec" && -+ test "$compiler_needs_object" = yes && -+ test -z "$libobjs"; then -+ # extract the archives, so we have objects to list. -+ # TODO: could optimize this to just extract one archive. -+ whole_archive_flag_spec= -+ fi -+ if test -n "$whole_archive_flag_spec"; then -+ save_libobjs=$libobjs -+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" -+ test "X$libobjs" = "X " && libobjs= -+ else -+ gentop="$output_objdir/${outputname}x" -+ func_append generated " $gentop" - -- compile_var= -- finalize_var= -- if test -n "$runpath_var"; then -- if test -n "$perm_rpath"; then -- # We should set the runpath_var. -- rpath= -- for dir in $perm_rpath; do -- rpath="$rpath$dir:" -- done -- compile_var="$runpath_var=\"$rpath\$$runpath_var\" " -- fi -- if test -n "$finalize_perm_rpath"; then -- # We should set the runpath_var. -- rpath= -- for dir in $finalize_perm_rpath; do -- rpath="$rpath$dir:" -- done -- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " -+ func_extract_archives $gentop $convenience -+ func_append libobjs " $func_extract_archives_result" -+ test "X$libobjs" = "X " && libobjs= -+ fi - fi -- fi - -- if test "$no_install" = yes; then -- # We don't need to create a wrapper script. -- link_command="$compile_var$compile_command$compile_rpath" -- # Replace the output file specification. -- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` -- # Delete the old output file. -- $run $rm $output -- # Link the executable and exit -- $show "$link_command" -- $run eval "$link_command" || exit $? -- exit 0 -- fi -+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then -+ eval flag=\"$thread_safe_flag_spec\" -+ func_append linker_flags " $flag" -+ fi - -- if test "$hardcode_action" = relink; then -- # Fast installation is not supported -- link_command="$compile_var$compile_command$compile_rpath" -- relink_command="$finalize_var$finalize_command$finalize_rpath" -+ # Make a backup of the uninstalled library when relinking -+ if test "$opt_mode" = relink; then -+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? -+ fi - -- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 -- $echo "$modename: \`$output' will be relinked during installation" 1>&2 -- else -- if test "$fast_install" != no; then -- link_command="$finalize_var$compile_command$finalize_rpath" -- if test "$fast_install" = yes; then -- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` -+ # Do each of the archive commands. -+ if test "$module" = yes && test -n "$module_cmds" ; then -+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then -+ eval test_cmds=\"$module_expsym_cmds\" -+ cmds=$module_expsym_cmds - else -- # fast_install is set to needless -- relink_command= -+ eval test_cmds=\"$module_cmds\" -+ cmds=$module_cmds - fi - else -- link_command="$compile_var$compile_command$compile_rpath" -- relink_command="$finalize_var$finalize_command$finalize_rpath" -- fi -- fi -- -- # Replace the output file specification. -- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` -- -- # Delete the old output files. -- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname -- -- $show "$link_command" -- $run eval "$link_command" || exit $? -- -- # Now create the wrapper script. -- $show "creating $output" -- -- # Quote the relink command for shipping. -- if test -n "$relink_command"; then -- # Preserve any variables that may affect compiler behavior -- for var in $variables_saved_for_relink; do -- if eval test -z \"\${$var+set}\"; then -- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" -- elif eval var_value=\$$var; test -z "$var_value"; then -- relink_command="$var=; export $var; $relink_command" -+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then -+ eval test_cmds=\"$archive_expsym_cmds\" -+ cmds=$archive_expsym_cmds - else -- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` -- relink_command="$var=\"$var_value\"; export $var; $relink_command" -+ eval test_cmds=\"$archive_cmds\" -+ cmds=$archive_cmds - fi -- done -- relink_command="cd `pwd`; $relink_command" -- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` -- fi -- -- # Quote $echo for shipping. -- if test "X$echo" = "X$SHELL $0 --fallback-echo"; then -- case $0 in -- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; -- *) qecho="$SHELL `pwd`/$0 --fallback-echo";; -- esac -- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` -- else -- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` -- fi -- -- # Only actually do things if our run command is non-null. -- if test -z "$run"; then -- # win32 will think the script is a binary if it has -- # a .exe suffix, so we strip it off here. -- case $output in -- *.exe) output=`echo $output|sed 's,.exe$,,'` ;; -- esac -- # test for cygwin because mv fails w/o .exe extensions -- case $host in -- *cygwin*) exeext=.exe ;; -- *) exeext= ;; -- esac -- $rm $output -- trap "$rm $output; exit 1" 1 2 15 -- -- $echo > $output "\ --#! $SHELL -- --# $output - temporary wrapper script for $objdir/$outputname --# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP --# --# The $output program cannot be directly executed until all the libtool --# libraries that it depends on are installed. --# --# This wrapper script should never be moved out of the build directory. --# If it is, it will not operate correctly. -- --# Sed substitution that helps us do robust quoting. It backslashifies --# metacharacters that are still active within double-quoted strings. --Xsed='sed -e 1s/^X//' --sed_quote_subst='$sed_quote_subst' -- --# The HP-UX ksh and POSIX shell print the target directory to stdout --# if CDPATH is set. --if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi -- --relink_command=\"$relink_command\" -- --# This environment variable determines our operation mode. --if test \"\$libtool_install_magic\" = \"$magic\"; then -- # install mode needs the following variable: -- notinst_deplibs='$notinst_deplibs' --else -- # When we are sourced in execute mode, \$file and \$echo are already set. -- if test \"\$libtool_execute_magic\" != \"$magic\"; then -- echo=\"$qecho\" -- file=\"\$0\" -- # Make sure echo works. -- if test \"X\$1\" = X--no-reexec; then -- # Discard the --no-reexec flag, and continue. -- shift -- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then -- # Yippee, \$echo works! -- : -- else -- # Restart under the correct shell, and then maybe \$echo will work. -- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} -- fi -- fi\ --" -- $echo >> $output "\ -- -- # Find the directory that this script lives in. -- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` -- test \"x\$thisdir\" = \"x\$file\" && thisdir=. -- -- # Follow symbolic links until we get to the real thisdir. -- file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` -- while test -n \"\$file\"; do -- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` -- -- # If there was a directory component, then change thisdir. -- if test \"x\$destdir\" != \"x\$file\"; then -- case \"\$destdir\" in -- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; -- *) thisdir=\"\$thisdir/\$destdir\" ;; -- esac -- fi -- -- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` -- file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` -- done -- -- # Try to get the absolute directory name. -- absdir=\`cd \"\$thisdir\" && pwd\` -- test -n \"\$absdir\" && thisdir=\"\$absdir\" --" -- -- if test "$fast_install" = yes; then -- echo >> $output "\ -- program=lt-'$outputname'$exeext -- progdir=\"\$thisdir/$objdir\" -- -- if test ! -f \"\$progdir/\$program\" || \\ -- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ -- test \"X\$file\" != \"X\$progdir/\$program\"; }; then -- -- file=\"\$\$-\$program\" -- -- if test ! -d \"\$progdir\"; then -- $mkdir \"\$progdir\" -- else -- $rm \"\$progdir/\$file\" -- fi" -- -- echo >> $output "\ -- -- # relink executable if necessary -- if test -n \"\$relink_command\"; then -- if relink_command_output=\`eval \$relink_command 2>&1\`; then : -- else -- $echo \"\$relink_command_output\" >&2 -- $rm \"\$progdir/\$file\" -- exit 1 -- fi -- fi -- -- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || -- { $rm \"\$progdir/\$program\"; -- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } -- $rm \"\$progdir/\$file\" -- fi" -- else -- echo >> $output "\ -- program='$outputname' -- progdir=\"\$thisdir/$objdir\" --" -- fi -- -- echo >> $output "\ -- -- if test -f \"\$progdir/\$program\"; then" -- -- # Export our shlibpath_var if we have one. -- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then -- $echo >> $output "\ -- # Add our own library path to $shlibpath_var -- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" -- -- # Some systems cannot cope with colon-terminated $shlibpath_var -- # The second colon is a workaround for a bug in BeOS R4 sed -- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` -- -- export $shlibpath_var --" - fi - -- # fixup the dll searchpath if we need to. -- if test -n "$dllsearchpath"; then -- $echo >> $output "\ -- # Add the dll search path components to the executable PATH -- PATH=$dllsearchpath:\$PATH --" -- fi -+ if test "X$skipped_export" != "X:" && -+ func_len " $test_cmds" && -+ len=$func_len_result && -+ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then -+ : -+ else -+ # The command line is too long to link in one step, link piecewise -+ # or, if using GNU ld and skipped_export is not :, use a linker -+ # script. -+ -+ # Save the value of $output and $libobjs because we want to -+ # use them later. If we have whole_archive_flag_spec, we -+ # want to use save_libobjs as it was before -+ # whole_archive_flag_spec was expanded, because we can't -+ # assume the linker understands whole_archive_flag_spec. -+ # This may have to be revisited, in case too many -+ # convenience libraries get linked in and end up exceeding -+ # the spec. -+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then -+ save_libobjs=$libobjs -+ fi -+ save_output=$output -+ func_basename "$output" -+ output_la=$func_basename_result -+ -+ # Clear the reloadable object creation command queue and -+ # initialize k to one. -+ test_cmds= -+ concat_cmds= -+ objlist= -+ last_robj= -+ k=1 -+ -+ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then -+ output=${output_objdir}/${output_la}.lnkscript -+ func_verbose "creating GNU ld script: $output" -+ echo 'INPUT (' > $output -+ for obj in $save_libobjs -+ do -+ func_to_tool_file "$obj" -+ $ECHO "$func_to_tool_file_result" >> $output -+ done -+ echo ')' >> $output -+ func_append delfiles " $output" -+ func_to_tool_file "$output" -+ output=$func_to_tool_file_result -+ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then -+ output=${output_objdir}/${output_la}.lnk -+ func_verbose "creating linker input file list: $output" -+ : > $output -+ set x $save_libobjs -+ shift -+ firstobj= -+ if test "$compiler_needs_object" = yes; then -+ firstobj="$1 " -+ shift -+ fi -+ for obj -+ do -+ func_to_tool_file "$obj" -+ $ECHO "$func_to_tool_file_result" >> $output -+ done -+ func_append delfiles " $output" -+ func_to_tool_file "$output" -+ output=$firstobj\"$file_list_spec$func_to_tool_file_result\" -+ else -+ if test -n "$save_libobjs"; then -+ func_verbose "creating reloadable object files..." -+ output=$output_objdir/$output_la-${k}.$objext -+ eval test_cmds=\"$reload_cmds\" -+ func_len " $test_cmds" -+ len0=$func_len_result -+ len=$len0 -+ -+ # Loop over the list of objects to be linked. -+ for obj in $save_libobjs -+ do -+ func_len " $obj" -+ func_arith $len + $func_len_result -+ len=$func_arith_result -+ if test "X$objlist" = X || -+ test "$len" -lt "$max_cmd_len"; then -+ func_append objlist " $obj" -+ else -+ # The command $test_cmds is almost too long, add a -+ # command to the queue. -+ if test "$k" -eq 1 ; then -+ # The first file doesn't have a previous command to add. -+ reload_objs=$objlist -+ eval concat_cmds=\"$reload_cmds\" -+ else -+ # All subsequent reloadable object files will link in -+ # the last one created. -+ reload_objs="$objlist $last_robj" -+ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" -+ fi -+ last_robj=$output_objdir/$output_la-${k}.$objext -+ func_arith $k + 1 -+ k=$func_arith_result -+ output=$output_objdir/$output_la-${k}.$objext -+ objlist=" $obj" -+ func_len " $last_robj" -+ func_arith $len0 + $func_len_result -+ len=$func_arith_result -+ fi -+ done -+ # Handle the remaining objects by creating one last -+ # reloadable object file. All subsequent reloadable object -+ # files will link in the last one created. -+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ -+ reload_objs="$objlist $last_robj" -+ eval concat_cmds=\"\${concat_cmds}$reload_cmds\" -+ if test -n "$last_robj"; then -+ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" -+ fi -+ func_append delfiles " $output" - -- $echo >> $output "\ -- if test \"\$libtool_execute_magic\" != \"$magic\"; then -- # Run the actual program with our arguments. --" -- case $host in -- # win32 systems need to use the prog path for dll -- # lookup to work -- *-*-cygwin* | *-*-pw32*) -- $echo >> $output "\ -- exec \$progdir/\$program \${1+\"\$@\"} --" -- ;; -+ else -+ output= -+ fi - -- # Backslashes separate directories on plain windows -- *-*-mingw | *-*-os2*) -- $echo >> $output "\ -- exec \$progdir\\\\\$program \${1+\"\$@\"} --" -- ;; -+ if ${skipped_export-false}; then -+ func_verbose "generating symbol list for \`$libname.la'" -+ export_symbols="$output_objdir/$libname.exp" -+ $opt_dry_run || $RM $export_symbols -+ libobjs=$output -+ # Append the command to create the export file. -+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ -+ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" -+ if test -n "$last_robj"; then -+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" -+ fi -+ fi - -- *) -- $echo >> $output "\ -- # Export the path to the program. -- PATH=\"\$progdir:\$PATH\" -- export PATH -+ test -n "$save_libobjs" && -+ func_verbose "creating a temporary reloadable object file: $output" - -- exec \$program \${1+\"\$@\"} --" -- ;; -- esac -- $echo >> $output "\ -- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" -- exit 1 -- fi -- else -- # The program doesn't exist. -- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 -- \$echo \"This script is just a wrapper for \$program.\" 1>&2 -- echo \"See the $PACKAGE documentation for more information.\" 1>&2 -- exit 1 -- fi --fi\ --" -- chmod +x $output -- fi -- exit 0 -- ;; -- esac -+ # Loop through the commands generated above and execute them. -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $concat_cmds; do -+ IFS="$save_ifs" -+ $opt_silent || { -+ func_quote_for_expand "$cmd" -+ eval "func_echo $func_quote_for_expand_result" -+ } -+ $opt_dry_run || eval "$cmd" || { -+ lt_exit=$? -+ -+ # Restore the uninstalled library and exit -+ if test "$opt_mode" = relink; then -+ ( cd "$output_objdir" && \ -+ $RM "${realname}T" && \ -+ $MV "${realname}U" "$realname" ) -+ fi - -- # See if we need to build an old-fashioned archive. -- for oldlib in $oldlibs; do -+ exit $lt_exit -+ } -+ done -+ IFS="$save_ifs" - -- if test "$build_libtool_libs" = convenience; then -- oldobjs="$libobjs_save" -- addlibs="$convenience" -- build_libtool_libs=no -- else -- if test "$build_libtool_libs" = module; then -- oldobjs="$libobjs_save" -- build_libtool_libs=no -- else -- oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` -- fi -- addlibs="$old_convenience" -- fi -+ if test -n "$export_symbols_regex" && ${skipped_export-false}; then -+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' -+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"' -+ fi -+ fi - -- if test -n "$addlibs"; then -- gentop="$output_objdir/${outputname}x" -- $show "${rm}r $gentop" -- $run ${rm}r "$gentop" -- $show "mkdir $gentop" -- $run mkdir "$gentop" -- status=$? -- if test $status -ne 0 && test ! -d "$gentop"; then -- exit $status -- fi -- generated="$generated $gentop" -- -- # Add in members from convenience archives. -- for xlib in $addlibs; do -- # Extract the objects. -- case $xlib in -- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; -- *) xabs=`pwd`"/$xlib" ;; -- esac -- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` -- xdir="$gentop/$xlib" -+ if ${skipped_export-false}; then -+ if test -n "$export_symbols" && test -n "$include_expsyms"; then -+ tmp_export_symbols="$export_symbols" -+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" -+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' -+ fi - -- $show "${rm}r $xdir" -- $run ${rm}r "$xdir" -- $show "mkdir $xdir" -- $run mkdir "$xdir" -- status=$? -- if test $status -ne 0 && test ! -d "$xdir"; then -- exit $status -+ if test -n "$orig_export_symbols"; then -+ # The given exports_symbols file has to be filtered, so filter it. -+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" -+ # FIXME: $output_objdir/$libname.filter potentially contains lots of -+ # 's' commands which not all seds can handle. GNU sed should be fine -+ # though. Also, the filter scales superlinearly with the number of -+ # global variables. join(1) would be nice here, but unfortunately -+ # isn't a blessed tool. -+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter -+ func_append delfiles " $export_symbols $output_objdir/$libname.filter" -+ export_symbols=$output_objdir/$libname.def -+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols -+ fi - fi -- $show "(cd $xdir && $AR x $xabs)" -- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - -- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` -- done -- fi -+ libobjs=$output -+ # Restore the value of output. -+ output=$save_output - -- # Do each command in the archive commands. -- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then -- eval cmds=\"$old_archive_from_new_cmds\" -- else -- # Ensure that we have .o objects in place in case we decided -- # not to build a shared library, and have fallen back to building -- # static libs even though --disable-static was passed! -- for oldobj in $oldobjs; do -- if test ! -f $oldobj; then -- xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` -- if test "X$xdir" = "X$oldobj"; then -- xdir="." -+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then -+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" -+ test "X$libobjs" = "X " && libobjs= -+ fi -+ # Expand the library linking commands again to reset the -+ # value of $libobjs for piecewise linking. -+ -+ # Do each of the archive commands. -+ if test "$module" = yes && test -n "$module_cmds" ; then -+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then -+ cmds=$module_expsym_cmds - else -- xdir="$xdir" -+ cmds=$module_cmds -+ fi -+ else -+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then -+ cmds=$archive_expsym_cmds -+ else -+ cmds=$archive_cmds - fi -- baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` -- obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` -- $show "(cd $xdir && ${LN_S} $obj $baseobj)" -- $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? - fi -- done -- -- eval cmds=\"$old_archive_cmds\" -- fi -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -- IFS="$save_ifs" -- done -+ fi - -- if test -n "$generated"; then -- $show "${rm}r$generated" -- $run ${rm}r$generated -- fi -+ if test -n "$delfiles"; then -+ # Append the command to remove temporary files to $cmds. -+ eval cmds=\"\$cmds~\$RM $delfiles\" -+ fi - -- # Now create the libtool archive. -- case $output in -- *.la) -- old_library= -- test "$build_old_libs" = yes && old_library="$libname.$libext" -- $show "creating $output" -+ # Add any objects from preloaded convenience libraries -+ if test -n "$dlprefiles"; then -+ gentop="$output_objdir/${outputname}x" -+ func_append generated " $gentop" - -- # Preserve any variables that may affect compiler behavior -- for var in $variables_saved_for_relink; do -- if eval test -z \"\${$var+set}\"; then -- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" -- elif eval var_value=\$$var; test -z "$var_value"; then -- relink_command="$var=; export $var; $relink_command" -- else -- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` -- relink_command="$var=\"$var_value\"; export $var; $relink_command" -+ func_extract_archives $gentop $dlprefiles -+ func_append libobjs " $func_extract_archives_result" -+ test "X$libobjs" = "X " && libobjs= - fi -- done -- # Quote the link command for shipping. -- relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args" -- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` - -- # Only create the output if not a dry run. -- if test -z "$run"; then -- for installed in no yes; do -- if test "$installed" = yes; then -- if test -z "$install_libdir"; then -- break -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ eval cmd=\"$cmd\" -+ $opt_silent || { -+ func_quote_for_expand "$cmd" -+ eval "func_echo $func_quote_for_expand_result" -+ } -+ $opt_dry_run || eval "$cmd" || { -+ lt_exit=$? -+ -+ # Restore the uninstalled library and exit -+ if test "$opt_mode" = relink; then -+ ( cd "$output_objdir" && \ -+ $RM "${realname}T" && \ -+ $MV "${realname}U" "$realname" ) -+ fi -+ -+ exit $lt_exit -+ } -+ done -+ IFS="$save_ifs" -+ -+ # Restore the uninstalled library and exit -+ if test "$opt_mode" = relink; then -+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? -+ -+ if test -n "$convenience"; then -+ if test -z "$whole_archive_flag_spec"; then -+ func_show_eval '${RM}r "$gentop"' - fi -- output="$output_objdir/$outputname"i -- # Replace all uninstalled libtool libraries with the installed ones -- newdependency_libs= -- for deplib in $dependency_libs; do -- case $deplib in -- *.la) -- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` -- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` -- if test -z "$libdir"; then -- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 -- exit 1 -- fi -- newdependency_libs="$newdependency_libs $libdir/$name" -- ;; -- *) newdependency_libs="$newdependency_libs $deplib" ;; -- esac -- done -- dependency_libs="$newdependency_libs" -- newdlfiles= -- for lib in $dlfiles; do -- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` -- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` -- if test -z "$libdir"; then -- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 -- exit 1 -- fi -- newdlfiles="$newdlfiles $libdir/$name" -- done -- dlfiles="$newdlfiles" -- newdlprefiles= -- for lib in $dlprefiles; do -- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` -- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` -- if test -z "$libdir"; then -- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 -- exit 1 -- fi -- newdlprefiles="$newdlprefiles $libdir/$name" -- done -- dlprefiles="$newdlprefiles" - fi -- $rm $output -- # place dlname in correct position for cygwin -- tdlname=$dlname -- case $host,$output,$installed,$module,$dlname in -- *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; -- esac -- $echo > $output "\ --# $outputname - a libtool library file --# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP --# --# Please DO NOT delete this file! --# It is necessary for linking the library. - --# The name that we can dlopen(3). --dlname='$tdlname' -+ exit $EXIT_SUCCESS -+ fi - --# Names of this library. --library_names='$library_names' -+ # Create links to the real library. -+ for linkname in $linknames; do -+ if test "$realname" != "$linkname"; then -+ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' -+ fi -+ done - --# The name of the static archive. --old_library='$old_library' -+ # If -module or -export-dynamic was specified, set the dlname. -+ if test "$module" = yes || test "$export_dynamic" = yes; then -+ # On all known operating systems, these are identical. -+ dlname="$soname" -+ fi -+ fi -+ ;; - --# Libraries that this one depends upon. --dependency_libs='$dependency_libs' -+ obj) -+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -+ func_warning "\`-dlopen' is ignored for objects" -+ fi - --# Version information for $libname. --current=$current --age=$age --revision=$revision -+ case " $deplibs" in -+ *\ -l* | *\ -L*) -+ func_warning "\`-l' and \`-L' are ignored for objects" ;; -+ esac - --# Is this an already installed library? --installed=$installed -+ test -n "$rpath" && \ -+ func_warning "\`-rpath' is ignored for objects" - --# Files to dlopen/dlpreopen --dlopen='$dlfiles' --dlpreopen='$dlprefiles' -+ test -n "$xrpath" && \ -+ func_warning "\`-R' is ignored for objects" - --# Directory that this library needs to be installed in: --libdir='$install_libdir'" -- if test "$installed" = no && test $need_relink = yes; then -- $echo >> $output "\ --relink_command=\"$relink_command\"" -- fi -- done -- fi -+ test -n "$vinfo" && \ -+ func_warning "\`-version-info' is ignored for objects" - -- # Do a symbolic link so that the libtool archive can be found in -- # LD_LIBRARY_PATH before the program is installed. -- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" -- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? -- ;; -- esac -- exit 0 -- ;; -+ test -n "$release" && \ -+ func_warning "\`-release' is ignored for objects" - -- # libtool install mode -- install) -- modename="$modename: install" -+ case $output in -+ *.lo) -+ test -n "$objs$old_deplibs" && \ -+ func_fatal_error "cannot build library object \`$output' from non-libtool objects" - -- # There may be an optional sh(1) argument at the beginning of -- # install_prog (especially on Windows NT). -- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || -- # Allow the use of GNU shtool's install command. -- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then -- # Aesthetically quote it. -- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` -- case $arg in -- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) -- arg="\"$arg\"" -+ libobj=$output -+ func_lo2o "$libobj" -+ obj=$func_lo2o_result -+ ;; -+ *) -+ libobj= -+ obj="$output" - ;; - esac -- install_prog="$arg " -- arg="$1" -- shift -- else -- install_prog= -- arg="$nonopt" -- fi - -- # The real first argument should be the name of the installation program. -- # Aesthetically quote it. -- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` -- case $arg in -- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) -- arg="\"$arg\"" -- ;; -- esac -- install_prog="$install_prog$arg" -+ # Delete the old objects. -+ $opt_dry_run || $RM $obj $libobj - -- # We need to accept at least all the BSD install flags. -- dest= -- files= -- opts= -- prev= -- install_type= -- isdir=no -- stripme= -- for arg -- do -- if test -n "$dest"; then -- files="$files $dest" -- dest="$arg" -- continue -+ # Objects from convenience libraries. This assumes -+ # single-version convenience libraries. Whenever we create -+ # different ones for PIC/non-PIC, this we'll have to duplicate -+ # the extraction. -+ reload_conv_objs= -+ gentop= -+ # reload_cmds runs $LD directly, so let us get rid of -+ # -Wl from whole_archive_flag_spec and hope we can get by with -+ # turning comma into space.. -+ wl= -+ -+ if test -n "$convenience"; then -+ if test -n "$whole_archive_flag_spec"; then -+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" -+ reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` -+ else -+ gentop="$output_objdir/${obj}x" -+ func_append generated " $gentop" -+ -+ func_extract_archives $gentop $convenience -+ reload_conv_objs="$reload_objs $func_extract_archives_result" -+ fi - fi - -- case $arg in -- -d) isdir=yes ;; -- -f) prev="-f" ;; -- -g) prev="-g" ;; -- -m) prev="-m" ;; -- -o) prev="-o" ;; -- -s) -- stripme=" -s" -- continue -- ;; -- -*) ;; -+ # If we're not building shared, we need to use non_pic_objs -+ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" - -- *) -- # If the previous option needed an argument, then skip it. -- if test -n "$prev"; then -- prev= -- else -- dest="$arg" -- continue -+ # Create the old-style object. -+ reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test -+ -+ output="$obj" -+ func_execute_cmds "$reload_cmds" 'exit $?' -+ -+ # Exit if we aren't doing a library object file. -+ if test -z "$libobj"; then -+ if test -n "$gentop"; then -+ func_show_eval '${RM}r "$gentop"' - fi -- ;; -- esac - -- # Aesthetically quote the argument. -- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` -- case $arg in -- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) -- arg="\"$arg\"" -- ;; -+ exit $EXIT_SUCCESS -+ fi -+ -+ if test "$build_libtool_libs" != yes; then -+ if test -n "$gentop"; then -+ func_show_eval '${RM}r "$gentop"' -+ fi -+ -+ # Create an invalid libtool object if no PIC, so that we don't -+ # accidentally link it into a program. -+ # $show "echo timestamp > $libobj" -+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? -+ exit $EXIT_SUCCESS -+ fi -+ -+ if test -n "$pic_flag" || test "$pic_mode" != default; then -+ # Only do commands if we really have different PIC objects. -+ reload_objs="$libobjs $reload_conv_objs" -+ output="$libobj" -+ func_execute_cmds "$reload_cmds" 'exit $?' -+ fi -+ -+ if test -n "$gentop"; then -+ func_show_eval '${RM}r "$gentop"' -+ fi -+ -+ exit $EXIT_SUCCESS -+ ;; -+ -+ prog) -+ case $host in -+ *cygwin*) func_stripname '' '.exe' "$output" -+ output=$func_stripname_result.exe;; - esac -- install_prog="$install_prog $arg" -- done -+ test -n "$vinfo" && \ -+ func_warning "\`-version-info' is ignored for programs" - -- if test -z "$install_prog"; then -- $echo "$modename: you must specify an install program" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -- fi -+ test -n "$release" && \ -+ func_warning "\`-release' is ignored for programs" - -- if test -n "$prev"; then -- $echo "$modename: the \`$prev' option requires an argument" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -- fi -+ test "$preload" = yes \ -+ && test "$dlopen_support" = unknown \ -+ && test "$dlopen_self" = unknown \ -+ && test "$dlopen_self_static" = unknown && \ -+ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." - -- if test -z "$files"; then -- if test -z "$dest"; then -- $echo "$modename: no file or destination specified" 1>&2 -- else -- $echo "$modename: you must specify a destination" 1>&2 -- fi -- $echo "$help" 1>&2 -- exit 1 -- fi -+ case $host in -+ *-*-rhapsody* | *-*-darwin1.[012]) -+ # On Rhapsody replace the C library is the System framework -+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` -+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` -+ ;; -+ esac - -- # Strip any trailing slash from the destination. -- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` -+ case $host in -+ *-*-darwin*) -+ # Don't allow lazy linking, it breaks C++ global constructors -+ # But is supposedly fixed on 10.4 or later (yay!). -+ if test "$tagname" = CXX ; then -+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in -+ 10.[0123]) -+ func_append compile_command " ${wl}-bind_at_load" -+ func_append finalize_command " ${wl}-bind_at_load" -+ ;; -+ esac -+ fi -+ # Time to change all our "foo.ltframework" stuff back to "-framework foo" -+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` -+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` -+ ;; -+ esac - -- # Check to see that the destination is a directory. -- test -d "$dest" && isdir=yes -- if test "$isdir" = yes; then -- destdir="$dest" -- destname= -- else -- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` -- test "X$destdir" = "X$dest" && destdir=. -- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` - -- # Not a directory, so check to see that there is only one file specified. -- set dummy $files -- if test $# -gt 2; then -- $echo "$modename: \`$dest' is not a directory" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -- fi -- fi -- case $destdir in -- [\\/]* | [A-Za-z]:[\\/]*) ;; -- *) -- for file in $files; do -- case $file in -- *.lo) ;; -+ # move library search paths that coincide with paths to not yet -+ # installed libraries to the beginning of the library search list -+ new_libs= -+ for path in $notinst_path; do -+ case " $new_libs " in -+ *" -L$path/$objdir "*) ;; - *) -- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -+ case " $compile_deplibs " in -+ *" -L$path/$objdir "*) -+ func_append new_libs " -L$path/$objdir" ;; -+ esac - ;; - esac - done -- ;; -- esac -- -- # This variable tells wrapper scripts just to set variables rather -- # than running their programs. -- libtool_install_magic="$magic" -- -- staticlibs= -- future_libdirs= -- current_libdirs= -- for file in $files; do -- -- # Do each installation. -- case $file in -- *.$libext) -- # Do the static libraries later. -- staticlibs="$staticlibs $file" -- ;; -+ for deplib in $compile_deplibs; do -+ case $deplib in -+ -L*) -+ case " $new_libs " in -+ *" $deplib "*) ;; -+ *) func_append new_libs " $deplib" ;; -+ esac -+ ;; -+ *) func_append new_libs " $deplib" ;; -+ esac -+ done -+ compile_deplibs="$new_libs" - -- *.la) -- # Check to see that this really is a libtool archive. -- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : -- else -- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -- fi - -- library_names= -- old_library= -- relink_command= -- # If there is no directory component, then add one. -- case $file in -- */* | *\\*) . $file ;; -- *) . ./$file ;; -- esac -+ func_append compile_command " $compile_deplibs" -+ func_append finalize_command " $finalize_deplibs" - -- # Add the libdir to current_libdirs if it is the destination. -- if test "X$destdir" = "X$libdir"; then -- case "$current_libdirs " in -+ if test -n "$rpath$xrpath"; then -+ # If the user specified any rpath flags, then add them. -+ for libdir in $rpath $xrpath; do -+ # This is the magic to use -rpath. -+ case "$finalize_rpath " in - *" $libdir "*) ;; -- *) current_libdirs="$current_libdirs $libdir" ;; -+ *) func_append finalize_rpath " $libdir" ;; - esac -- else -- # Note the libdir as a future libdir. -- case "$future_libdirs " in -+ done -+ fi -+ -+ # Now hardcode the library paths -+ rpath= -+ hardcode_libdirs= -+ for libdir in $compile_rpath $finalize_rpath; do -+ if test -n "$hardcode_libdir_flag_spec"; then -+ if test -n "$hardcode_libdir_separator"; then -+ if test -z "$hardcode_libdirs"; then -+ hardcode_libdirs="$libdir" -+ else -+ # Just accumulate the unique libdirs. -+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -+ ;; -+ *) -+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" -+ ;; -+ esac -+ fi -+ else -+ eval flag=\"$hardcode_libdir_flag_spec\" -+ func_append rpath " $flag" -+ fi -+ elif test -n "$runpath_var"; then -+ case "$perm_rpath " in - *" $libdir "*) ;; -- *) future_libdirs="$future_libdirs $libdir" ;; -+ *) func_append perm_rpath " $libdir" ;; - esac - fi -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) -+ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` -+ case :$dllsearchpath: in -+ *":$libdir:"*) ;; -+ ::) dllsearchpath=$libdir;; -+ *) func_append dllsearchpath ":$libdir";; -+ esac -+ case :$dllsearchpath: in -+ *":$testbindir:"*) ;; -+ ::) dllsearchpath=$testbindir;; -+ *) func_append dllsearchpath ":$testbindir";; -+ esac -+ ;; -+ esac -+ done -+ # Substitute the hardcoded libdirs into the rpath. -+ if test -n "$hardcode_libdir_separator" && -+ test -n "$hardcode_libdirs"; then -+ libdir="$hardcode_libdirs" -+ eval rpath=\" $hardcode_libdir_flag_spec\" -+ fi -+ compile_rpath="$rpath" - -- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ -- test "X$dir" = "X$file/" && dir= -- dir="$dir$objdir" -- -- if test -n "$relink_command"; then -- $echo "$modename: warning: relinking \`$file'" 1>&2 -- $show "$relink_command" -- if $run eval "$relink_command"; then : -+ rpath= -+ hardcode_libdirs= -+ for libdir in $finalize_rpath; do -+ if test -n "$hardcode_libdir_flag_spec"; then -+ if test -n "$hardcode_libdir_separator"; then -+ if test -z "$hardcode_libdirs"; then -+ hardcode_libdirs="$libdir" -+ else -+ # Just accumulate the unique libdirs. -+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -+ ;; -+ *) -+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" -+ ;; -+ esac -+ fi - else -- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 -- continue -+ eval flag=\"$hardcode_libdir_flag_spec\" -+ func_append rpath " $flag" - fi -+ elif test -n "$runpath_var"; then -+ case "$finalize_perm_rpath " in -+ *" $libdir "*) ;; -+ *) func_append finalize_perm_rpath " $libdir" ;; -+ esac - fi -+ done -+ # Substitute the hardcoded libdirs into the rpath. -+ if test -n "$hardcode_libdir_separator" && -+ test -n "$hardcode_libdirs"; then -+ libdir="$hardcode_libdirs" -+ eval rpath=\" $hardcode_libdir_flag_spec\" -+ fi -+ finalize_rpath="$rpath" - -- # See the names of the shared library. -- set dummy $library_names -- if test -n "$2"; then -- realname="$2" -- shift -- shift -+ if test -n "$libobjs" && test "$build_old_libs" = yes; then -+ # Transform all the library objects into standard objects. -+ compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` -+ finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` -+ fi - -- srcname="$realname" -- test -n "$relink_command" && srcname="$realname"T -+ func_generate_dlsyms "$outputname" "@PROGRAM@" "no" - -- # Install the shared library and build the symlinks. -- $show "$install_prog $dir/$srcname $destdir/$realname" -- $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? -- if test -n "$stripme" && test -n "$striplib"; then -- $show "$striplib $destdir/$realname" -- $run eval "$striplib $destdir/$realname" || exit $? -- fi -+ # template prelinking step -+ if test -n "$prelink_cmds"; then -+ func_execute_cmds "$prelink_cmds" 'exit $?' -+ fi - -- if test $# -gt 0; then -- # Delete the old symlinks, and create new ones. -- for linkname -- do -- if test "$linkname" != "$realname"; then -- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" -- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" -- fi -- done -- fi -+ wrappers_required=yes -+ case $host in -+ *cegcc* | *mingw32ce*) -+ # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. -+ wrappers_required=no -+ ;; -+ *cygwin* | *mingw* ) -+ if test "$build_libtool_libs" != yes; then -+ wrappers_required=no -+ fi -+ ;; -+ *) -+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then -+ wrappers_required=no -+ fi -+ ;; -+ esac -+ if test "$wrappers_required" = no; then -+ # Replace the output file specification. -+ compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` -+ link_command="$compile_command$compile_rpath" - -- # Do each command in the postinstall commands. -- lib="$destdir/$realname" -- eval cmds=\"$postinstall_cmds\" -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -- IFS="$save_ifs" -+ # We have no uninstalled library dependencies, so finalize right now. -+ exit_status=0 -+ func_show_eval "$link_command" 'exit_status=$?' -+ -+ if test -n "$postlink_cmds"; then -+ func_to_tool_file "$output" -+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` -+ func_execute_cmds "$postlink_cmds" 'exit $?' - fi - -- # Install the pseudo-library for information purposes. -- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -- instname="$dir/$name"i -- $show "$install_prog $instname $destdir/$name" -- $run eval "$install_prog $instname $destdir/$name" || exit $? -+ # Delete the generated files. -+ if test -f "$output_objdir/${outputname}S.${objext}"; then -+ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' -+ fi - -- # Maybe install the static library, too. -- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" -- ;; -+ exit $exit_status -+ fi - -- *.lo) -- # Install (i.e. copy) a libtool object. -+ if test -n "$compile_shlibpath$finalize_shlibpath"; then -+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" -+ fi -+ if test -n "$finalize_shlibpath"; then -+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" -+ fi - -- # Figure out destination file name, if it wasn't already specified. -- if test -n "$destname"; then -- destfile="$destdir/$destname" -- else -- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -- destfile="$destdir/$destfile" -+ compile_var= -+ finalize_var= -+ if test -n "$runpath_var"; then -+ if test -n "$perm_rpath"; then -+ # We should set the runpath_var. -+ rpath= -+ for dir in $perm_rpath; do -+ func_append rpath "$dir:" -+ done -+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi -- -- # Deduce the name of the destination old-style object file. -- case $destfile in -- *.lo) -- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` -- ;; -- *.$objext) -- staticdest="$destfile" -- destfile= -- ;; -- *) -- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -- ;; -- esac -- -- # Install the libtool object if requested. -- if test -n "$destfile"; then -- $show "$install_prog $file $destfile" -- $run eval "$install_prog $file $destfile" || exit $? -+ if test -n "$finalize_perm_rpath"; then -+ # We should set the runpath_var. -+ rpath= -+ for dir in $finalize_perm_rpath; do -+ func_append rpath "$dir:" -+ done -+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi -+ fi - -- # Install the old object if enabled. -- if test "$build_old_libs" = yes; then -- # Deduce the name of the old-style object file. -- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` -+ if test "$no_install" = yes; then -+ # We don't need to create a wrapper script. -+ link_command="$compile_var$compile_command$compile_rpath" -+ # Replace the output file specification. -+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` -+ # Delete the old output file. -+ $opt_dry_run || $RM $output -+ # Link the executable and exit -+ func_show_eval "$link_command" 'exit $?' - -- $show "$install_prog $staticobj $staticdest" -- $run eval "$install_prog \$staticobj \$staticdest" || exit $? -+ if test -n "$postlink_cmds"; then -+ func_to_tool_file "$output" -+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` -+ func_execute_cmds "$postlink_cmds" 'exit $?' - fi -- exit 0 -- ;; - -- *) -- # Figure out destination file name, if it wasn't already specified. -- if test -n "$destname"; then -- destfile="$destdir/$destname" -+ exit $EXIT_SUCCESS -+ fi -+ -+ if test "$hardcode_action" = relink; then -+ # Fast installation is not supported -+ link_command="$compile_var$compile_command$compile_rpath" -+ relink_command="$finalize_var$finalize_command$finalize_rpath" -+ -+ func_warning "this platform does not like uninstalled shared libraries" -+ func_warning "\`$output' will be relinked during installation" -+ else -+ if test "$fast_install" != no; then -+ link_command="$finalize_var$compile_command$finalize_rpath" -+ if test "$fast_install" = yes; then -+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` -+ else -+ # fast_install is set to needless -+ relink_command= -+ fi - else -- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -- destfile="$destdir/$destfile" -+ link_command="$compile_var$compile_command$compile_rpath" -+ relink_command="$finalize_var$finalize_command$finalize_rpath" - fi -+ fi - -- # Do a test to see if this is really a libtool program. -- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then -- notinst_deplibs= -- relink_command= -+ # Replace the output file specification. -+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - -- # If there is no directory component, then add one. -- case $file in -- */* | *\\*) . $file ;; -- *) . ./$file ;; -- esac -+ # Delete the old output files. -+ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname - -- # Check the variables that should have been set. -- if test -z "$notinst_deplibs"; then -- $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 -- exit 1 -- fi -+ func_show_eval "$link_command" 'exit $?' - -- finalize=yes -- for lib in $notinst_deplibs; do -- # Check to see that each library is installed. -- libdir= -- if test -f "$lib"; then -- # If there is no directory component, then add one. -- case $lib in -- */* | *\\*) . $lib ;; -- *) . ./$lib ;; -- esac -- fi -- libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test -- if test -n "$libdir" && test ! -f "$libfile"; then -- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 -- finalize=no -- fi -- done -+ if test -n "$postlink_cmds"; then -+ func_to_tool_file "$output_objdir/$outputname" -+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` -+ func_execute_cmds "$postlink_cmds" 'exit $?' -+ fi - -- relink_command= -- # If there is no directory component, then add one. -- case $file in -- */* | *\\*) . $file ;; -- *) . ./$file ;; -- esac -+ # Now create the wrapper script. -+ func_verbose "creating $output" - -- outputname= -- if test "$fast_install" = no && test -n "$relink_command"; then -- if test "$finalize" = yes && test -z "$run"; then -- tmpdir="/tmp" -- test -n "$TMPDIR" && tmpdir="$TMPDIR" -- tmpdir="$tmpdir/libtool-$$" -- if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : -- else -- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 -- continue -- fi -- file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -- outputname="$tmpdir/$file" -- # Replace the output file specification. -- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` -+ # Quote the relink command for shipping. -+ if test -n "$relink_command"; then -+ # Preserve any variables that may affect compiler behavior -+ for var in $variables_saved_for_relink; do -+ if eval test -z \"\${$var+set}\"; then -+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" -+ elif eval var_value=\$$var; test -z "$var_value"; then -+ relink_command="$var=; export $var; $relink_command" -+ else -+ func_quote_for_eval "$var_value" -+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" -+ fi -+ done -+ relink_command="(cd `pwd`; $relink_command)" -+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` -+ fi - -- $show "$relink_command" -- if $run eval "$relink_command"; then : -+ # Only actually do things if not in dry run mode. -+ $opt_dry_run || { -+ # win32 will think the script is a binary if it has -+ # a .exe suffix, so we strip it off here. -+ case $output in -+ *.exe) func_stripname '' '.exe' "$output" -+ output=$func_stripname_result ;; -+ esac -+ # test for cygwin because mv fails w/o .exe extensions -+ case $host in -+ *cygwin*) -+ exeext=.exe -+ func_stripname '' '.exe' "$outputname" -+ outputname=$func_stripname_result ;; -+ *) exeext= ;; -+ esac -+ case $host in -+ *cygwin* | *mingw* ) -+ func_dirname_and_basename "$output" "" "." -+ output_name=$func_basename_result -+ output_path=$func_dirname_result -+ cwrappersource="$output_path/$objdir/lt-$output_name.c" -+ cwrapper="$output_path/$output_name.exe" -+ $RM $cwrappersource $cwrapper -+ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 -+ -+ func_emit_cwrapperexe_src > $cwrappersource -+ -+ # The wrapper executable is built using the $host compiler, -+ # because it contains $host paths and files. If cross- -+ # compiling, it, like the target executable, must be -+ # executed on the $host or under an emulation environment. -+ $opt_dry_run || { -+ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource -+ $STRIP $cwrapper -+ } -+ -+ # Now, create the wrapper script for func_source use: -+ func_ltwrapper_scriptname $cwrapper -+ $RM $func_ltwrapper_scriptname_result -+ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 -+ $opt_dry_run || { -+ # note: this script will not be executed, so do not chmod. -+ if test "x$build" = "x$host" ; then -+ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result - else -- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 -- ${rm}r "$tmpdir" -- continue -+ func_emit_wrapper no > $func_ltwrapper_scriptname_result - fi -- file="$outputname" -- else -- $echo "$modename: warning: cannot relink \`$file'" 1>&2 -- fi -- else -- # Install the binary that we compiled earlier. -- file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` -- fi -- fi -+ } -+ ;; -+ * ) -+ $RM $output -+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 - -- # remove .exe since cygwin /usr/bin/install will append another -- # one anyways -- case $install_prog,$host in -- /usr/bin/install*,*cygwin*) -- case $file:$destfile in -- *.exe:*.exe) -- # this is ok -- ;; -- *.exe:*) -- destfile=$destfile.exe -- ;; -- *:*.exe) -- destfile=`echo $destfile | sed -e 's,.exe$,,'` -- ;; -- esac -+ func_emit_wrapper no > $output -+ chmod +x $output - ;; - esac -- $show "$install_prog$stripme $file $destfile" -- $run eval "$install_prog\$stripme \$file \$destfile" || exit $? -- test -n "$outputname" && ${rm}r "$tmpdir" -- ;; -- esac -- done -- -- for file in $staticlibs; do -- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -- -- # Set up the ranlib parameters. -- oldlib="$destdir/$name" -+ } -+ exit $EXIT_SUCCESS -+ ;; -+ esac - -- $show "$install_prog $file $oldlib" -- $run eval "$install_prog \$file \$oldlib" || exit $? -+ # See if we need to build an old-fashioned archive. -+ for oldlib in $oldlibs; do - -- if test -n "$stripme" && test -n "$striplib"; then -- $show "$old_striplib $oldlib" -- $run eval "$old_striplib $oldlib" || exit $? -+ if test "$build_libtool_libs" = convenience; then -+ oldobjs="$libobjs_save $symfileobj" -+ addlibs="$convenience" -+ build_libtool_libs=no -+ else -+ if test "$build_libtool_libs" = module; then -+ oldobjs="$libobjs_save" -+ build_libtool_libs=no -+ else -+ oldobjs="$old_deplibs $non_pic_objects" -+ if test "$preload" = yes && test -f "$symfileobj"; then -+ func_append oldobjs " $symfileobj" -+ fi -+ fi -+ addlibs="$old_convenience" - fi - -- # Do each command in the postinstall commands. -- eval cmds=\"$old_postinstall_cmds\" -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- $show "$cmd" -- $run eval "$cmd" || exit $? -- done -- IFS="$save_ifs" -- done -- -- if test -n "$future_libdirs"; then -- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 -- fi -- -- if test -n "$current_libdirs"; then -- # Maybe just do a dry run. -- test -n "$run" && current_libdirs=" -n$current_libdirs" -- exec_cmd='$SHELL $0 --finish$current_libdirs' -- else -- exit 0 -- fi -- ;; -+ if test -n "$addlibs"; then -+ gentop="$output_objdir/${outputname}x" -+ func_append generated " $gentop" - -- # libtool finish mode -- finish) -- modename="$modename: finish" -- libdirs="$nonopt" -- admincmds= -+ func_extract_archives $gentop $addlibs -+ func_append oldobjs " $func_extract_archives_result" -+ fi - -- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then -- for dir -- do -- libdirs="$libdirs $dir" -- done -+ # Do each command in the archive commands. -+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then -+ cmds=$old_archive_from_new_cmds -+ else - -- for libdir in $libdirs; do -- if test -n "$finish_cmds"; then -- # Do each command in the finish commands. -- eval cmds=\"$finish_cmds\" -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- $show "$cmd" -- $run eval "$cmd" || admincmds="$admincmds -- $cmd" -+ # Add any objects from preloaded convenience libraries -+ if test -n "$dlprefiles"; then -+ gentop="$output_objdir/${outputname}x" -+ func_append generated " $gentop" -+ -+ func_extract_archives $gentop $dlprefiles -+ func_append oldobjs " $func_extract_archives_result" -+ fi -+ -+ # POSIX demands no paths to be encoded in archives. We have -+ # to avoid creating archives with duplicate basenames if we -+ # might have to extract them afterwards, e.g., when creating a -+ # static archive out of a convenience library, or when linking -+ # the entirety of a libtool archive into another (currently -+ # not supported by libtool). -+ if (for obj in $oldobjs -+ do -+ func_basename "$obj" -+ $ECHO "$func_basename_result" -+ done | sort | sort -uc >/dev/null 2>&1); then -+ : -+ else -+ echo "copying selected object files to avoid basename conflicts..." -+ gentop="$output_objdir/${outputname}x" -+ func_append generated " $gentop" -+ func_mkdir_p "$gentop" -+ save_oldobjs=$oldobjs -+ oldobjs= -+ counter=1 -+ for obj in $save_oldobjs -+ do -+ func_basename "$obj" -+ objbase="$func_basename_result" -+ case " $oldobjs " in -+ " ") oldobjs=$obj ;; -+ *[\ /]"$objbase "*) -+ while :; do -+ # Make sure we don't pick an alternate name that also -+ # overlaps. -+ newobj=lt$counter-$objbase -+ func_arith $counter + 1 -+ counter=$func_arith_result -+ case " $oldobjs " in -+ *[\ /]"$newobj "*) ;; -+ *) if test ! -f "$gentop/$newobj"; then break; fi ;; -+ esac -+ done -+ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" -+ func_append oldobjs " $gentop/$newobj" -+ ;; -+ *) func_append oldobjs " $obj" ;; -+ esac - done -- IFS="$save_ifs" -- fi -- if test -n "$finish_eval"; then -- # Do the single finish_eval. -- eval cmds=\"$finish_eval\" -- $run eval "$cmds" || admincmds="$admincmds -- $cmds" - fi -- done -- fi -- -- # Exit here if they wanted silent mode. -- test "$show" = ":" && exit 0 -+ eval cmds=\"$old_archive_cmds\" - -- echo "----------------------------------------------------------------------" -- echo "Libraries have been installed in:" -- for libdir in $libdirs; do -- echo " $libdir" -+ func_len " $cmds" -+ len=$func_len_result -+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then -+ cmds=$old_archive_cmds -+ elif test -n "$archiver_list_spec"; then -+ func_verbose "using command file archive linking..." -+ for obj in $oldobjs -+ do -+ func_to_tool_file "$obj" -+ $ECHO "$func_to_tool_file_result" -+ done > $output_objdir/$libname.libcmd -+ func_to_tool_file "$output_objdir/$libname.libcmd" -+ oldobjs=" $archiver_list_spec$func_to_tool_file_result" -+ cmds=$old_archive_cmds -+ else -+ # the command line is too long to link in one step, link in parts -+ func_verbose "using piecewise archive linking..." -+ save_RANLIB=$RANLIB -+ RANLIB=: -+ objlist= -+ concat_cmds= -+ save_oldobjs=$oldobjs -+ oldobjs= -+ # Is there a better way of finding the last object in the list? -+ for obj in $save_oldobjs -+ do -+ last_oldobj=$obj -+ done -+ eval test_cmds=\"$old_archive_cmds\" -+ func_len " $test_cmds" -+ len0=$func_len_result -+ len=$len0 -+ for obj in $save_oldobjs -+ do -+ func_len " $obj" -+ func_arith $len + $func_len_result -+ len=$func_arith_result -+ func_append objlist " $obj" -+ if test "$len" -lt "$max_cmd_len"; then -+ : -+ else -+ # the above command should be used before it gets too long -+ oldobjs=$objlist -+ if test "$obj" = "$last_oldobj" ; then -+ RANLIB=$save_RANLIB -+ fi -+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ -+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" -+ objlist= -+ len=$len0 -+ fi -+ done -+ RANLIB=$save_RANLIB -+ oldobjs=$objlist -+ if test "X$oldobjs" = "X" ; then -+ eval cmds=\"\$concat_cmds\" -+ else -+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\" -+ fi -+ fi -+ fi -+ func_execute_cmds "$cmds" 'exit $?' - done -- echo -- echo "If you ever happen to want to link against installed libraries" -- echo "in a given directory, LIBDIR, you must either use libtool, and" -- echo "specify the full pathname of the library, or use the \`-LLIBDIR'" -- echo "flag during linking and do at least one of the following:" -- if test -n "$shlibpath_var"; then -- echo " - add LIBDIR to the \`$shlibpath_var' environment variable" -- echo " during execution" -- fi -- if test -n "$runpath_var"; then -- echo " - add LIBDIR to the \`$runpath_var' environment variable" -- echo " during linking" -- fi -- if test -n "$hardcode_libdir_flag_spec"; then -- libdir=LIBDIR -- eval flag=\"$hardcode_libdir_flag_spec\" -- -- echo " - use the \`$flag' linker flag" -- fi -- if test -n "$admincmds"; then -- echo " - have your system administrator run these commands:$admincmds" -- fi -- if test -f /etc/ld.so.conf; then -- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" -- fi -- echo -- echo "See any operating system documentation about shared libraries for" -- echo "more information, such as the ld(1) and ld.so(8) manual pages." -- echo "----------------------------------------------------------------------" -- exit 0 -- ;; -- -- # libtool execute mode -- execute) -- modename="$modename: execute" - -- # The first argument is the command name. -- cmd="$nonopt" -- if test -z "$cmd"; then -- $echo "$modename: you must specify a COMMAND" 1>&2 -- $echo "$help" -- exit 1 -- fi -+ test -n "$generated" && \ -+ func_show_eval "${RM}r$generated" - -- # Handle -dlopen flags immediately. -- for file in $execute_dlfiles; do -- if test ! -f "$file"; then -- $echo "$modename: \`$file' is not a file" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -- fi -+ # Now create the libtool archive. -+ case $output in -+ *.la) -+ old_library= -+ test "$build_old_libs" = yes && old_library="$libname.$libext" -+ func_verbose "creating $output" - -- dir= -- case $file in -- *.la) -- # Check to see that this really is a libtool archive. -- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : -+ # Preserve any variables that may affect compiler behavior -+ for var in $variables_saved_for_relink; do -+ if eval test -z \"\${$var+set}\"; then -+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" -+ elif eval var_value=\$$var; test -z "$var_value"; then -+ relink_command="$var=; export $var; $relink_command" - else -- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -+ func_quote_for_eval "$var_value" -+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi -+ done -+ # Quote the link command for shipping. -+ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" -+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` -+ if test "$hardcode_automatic" = yes ; then -+ relink_command= -+ fi - -- # Read the libtool library. -- dlname= -- library_names= -+ # Only create the output if not a dry run. -+ $opt_dry_run || { -+ for installed in no yes; do -+ if test "$installed" = yes; then -+ if test -z "$install_libdir"; then -+ break -+ fi -+ output="$output_objdir/$outputname"i -+ # Replace all uninstalled libtool libraries with the installed ones -+ newdependency_libs= -+ for deplib in $dependency_libs; do -+ case $deplib in -+ *.la) -+ func_basename "$deplib" -+ name="$func_basename_result" -+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` -+ test -z "$libdir" && \ -+ func_fatal_error "\`$deplib' is not a valid libtool archive" -+ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" -+ ;; -+ -L*) -+ func_stripname -L '' "$deplib" -+ func_replace_sysroot "$func_stripname_result" -+ func_append newdependency_libs " -L$func_replace_sysroot_result" -+ ;; -+ -R*) -+ func_stripname -R '' "$deplib" -+ func_replace_sysroot "$func_stripname_result" -+ func_append newdependency_libs " -R$func_replace_sysroot_result" -+ ;; -+ *) func_append newdependency_libs " $deplib" ;; -+ esac -+ done -+ dependency_libs="$newdependency_libs" -+ newdlfiles= -+ -+ for lib in $dlfiles; do -+ case $lib in -+ *.la) -+ func_basename "$lib" -+ name="$func_basename_result" -+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` -+ test -z "$libdir" && \ -+ func_fatal_error "\`$lib' is not a valid libtool archive" -+ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" -+ ;; -+ *) func_append newdlfiles " $lib" ;; -+ esac -+ done -+ dlfiles="$newdlfiles" -+ newdlprefiles= -+ for lib in $dlprefiles; do -+ case $lib in -+ *.la) -+ # Only pass preopened files to the pseudo-archive (for -+ # eventual linking with the app. that links it) if we -+ # didn't already link the preopened objects directly into -+ # the library: -+ func_basename "$lib" -+ name="$func_basename_result" -+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` -+ test -z "$libdir" && \ -+ func_fatal_error "\`$lib' is not a valid libtool archive" -+ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" -+ ;; -+ esac -+ done -+ dlprefiles="$newdlprefiles" -+ else -+ newdlfiles= -+ for lib in $dlfiles; do -+ case $lib in -+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; -+ *) abs=`pwd`"/$lib" ;; -+ esac -+ func_append newdlfiles " $abs" -+ done -+ dlfiles="$newdlfiles" -+ newdlprefiles= -+ for lib in $dlprefiles; do -+ case $lib in -+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; -+ *) abs=`pwd`"/$lib" ;; -+ esac -+ func_append newdlprefiles " $abs" -+ done -+ dlprefiles="$newdlprefiles" -+ fi -+ $RM $output -+ # place dlname in correct position for cygwin -+ # In fact, it would be nice if we could use this code for all target -+ # systems that can't hard-code library paths into their executables -+ # and that have no shared library path variable independent of PATH, -+ # but it turns out we can't easily determine that from inspecting -+ # libtool variables, so we have to hard-code the OSs to which it -+ # applies here; at the moment, that means platforms that use the PE -+ # object format with DLL files. See the long comment at the top of -+ # tests/bindir.at for full details. -+ tdlname=$dlname -+ case $host,$output,$installed,$module,$dlname in -+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) -+ # If a -bindir argument was supplied, place the dll there. -+ if test "x$bindir" != x ; -+ then -+ func_relative_path "$install_libdir" "$bindir" -+ tdlname=$func_relative_path_result$dlname -+ else -+ # Otherwise fall back on heuristic. -+ tdlname=../bin/$dlname -+ fi -+ ;; -+ esac -+ $ECHO > $output "\ -+# $outputname - a libtool library file -+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -+# -+# Please DO NOT delete this file! -+# It is necessary for linking the library. - -- # If there is no directory component, then add one. -- case $file in -- */* | *\\*) . $file ;; -- *) . ./$file ;; -- esac -+# The name that we can dlopen(3). -+dlname='$tdlname' - -- # Skip this library if it cannot be dlopened. -- if test -z "$dlname"; then -- # Warn if it was a shared library. -- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" -- continue -- fi -+# Names of this library. -+library_names='$library_names' - -- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` -- test "X$dir" = "X$file" && dir=. -+# The name of the static archive. -+old_library='$old_library' - -- if test -f "$dir/$objdir/$dlname"; then -- dir="$dir/$objdir" -- else -- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 -- exit 1 -- fi -- ;; -+# Linker flags that can not go in dependency_libs. -+inherited_linker_flags='$new_inherited_linker_flags' - -- *.lo) -- # Just add the directory containing the .lo file. -- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` -- test "X$dir" = "X$file" && dir=. -- ;; -+# Libraries that this one depends upon. -+dependency_libs='$dependency_libs' - -- *) -- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 -- continue -- ;; -- esac -+# Names of additional weak libraries provided by this library -+weak_library_names='$weak_libs' - -- # Get the absolute pathname. -- absdir=`cd "$dir" && pwd` -- test -n "$absdir" && dir="$absdir" -+# Version information for $libname. -+current=$current -+age=$age -+revision=$revision - -- # Now add the directory to shlibpath_var. -- if eval "test -z \"\$$shlibpath_var\""; then -- eval "$shlibpath_var=\"\$dir\"" -- else -- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" -- fi -- done -+# Is this an already installed library? -+installed=$installed - -- # This variable tells wrapper scripts just to set shlibpath_var -- # rather than running their programs. -- libtool_execute_magic="$magic" -+# Should we warn about portability when linking against -modules? -+shouldnotlink=$module - -- # Check if any of the arguments is a wrapper script. -- args= -- for file -- do -- case $file in -- -*) ;; -- *) -- # Do a test to see if this is really a libtool program. -- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then -- # If there is no directory component, then add one. -- case $file in -- */* | *\\*) . $file ;; -- *) . ./$file ;; -- esac -+# Files to dlopen/dlpreopen -+dlopen='$dlfiles' -+dlpreopen='$dlprefiles' - -- # Transform arg to wrapped name. -- file="$progdir/$program" -- fi -- ;; -- esac -- # Quote arguments (to preserve shell metacharacters). -- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` -- args="$args \"$file\"" -- done -+# Directory that this library needs to be installed in: -+libdir='$install_libdir'" -+ if test "$installed" = no && test "$need_relink" = yes; then -+ $ECHO >> $output "\ -+relink_command=\"$relink_command\"" -+ fi -+ done -+ } - -- if test -z "$run"; then -- if test -n "$shlibpath_var"; then -- # Export the shlibpath_var. -- eval "export $shlibpath_var" -- fi -+ # Do a symbolic link so that the libtool archive can be found in -+ # LD_LIBRARY_PATH before the program is installed. -+ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' -+ ;; -+ esac -+ exit $EXIT_SUCCESS -+} - -- # Restore saved enviroment variables -- if test "${save_LC_ALL+set}" = set; then -- LC_ALL="$save_LC_ALL"; export LC_ALL -- fi -- if test "${save_LANG+set}" = set; then -- LANG="$save_LANG"; export LANG -- fi -+{ test "$opt_mode" = link || test "$opt_mode" = relink; } && -+ func_mode_link ${1+"$@"} - -- # Now prepare to actually exec the command. -- exec_cmd='"$cmd"$args' -- else -- # Display what would be done. -- if test -n "$shlibpath_var"; then -- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" -- $echo "export $shlibpath_var" -- fi -- $echo "$cmd$args" -- exit 0 -- fi -- ;; - -- # libtool clean and uninstall mode -- clean | uninstall) -- modename="$modename: $mode" -- rm="$nonopt" -+# func_mode_uninstall arg... -+func_mode_uninstall () -+{ -+ $opt_debug -+ RM="$nonopt" - files= - rmforce= - exit_status=0 -@@ -4637,43 +9441,41 @@ - for arg - do - case $arg in -- -f) rm="$rm $arg"; rmforce=yes ;; -- -*) rm="$rm $arg" ;; -- *) files="$files $arg" ;; -+ -f) func_append RM " $arg"; rmforce=yes ;; -+ -*) func_append RM " $arg" ;; -+ *) func_append files " $arg" ;; - esac - done - -- if test -z "$rm"; then -- $echo "$modename: you must specify an RM program" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -- fi -+ test -z "$RM" && \ -+ func_fatal_help "you must specify an RM program" - - rmdirs= - - for file in $files; do -- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` -- if test "X$dir" = "X$file"; then -- dir=. -- objdir="$objdir" -+ func_dirname "$file" "" "." -+ dir="$func_dirname_result" -+ if test "X$dir" = X.; then -+ odir="$objdir" - else -- objdir="$dir/$objdir" -+ odir="$dir/$objdir" - fi -- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` -- test $mode = uninstall && objdir="$dir" -+ func_basename "$file" -+ name="$func_basename_result" -+ test "$opt_mode" = uninstall && odir="$dir" - -- # Remember objdir for removal later, being careful to avoid duplicates -- if test $mode = clean; then -+ # Remember odir for removal later, being careful to avoid duplicates -+ if test "$opt_mode" = clean; then - case " $rmdirs " in -- *" $objdir "*) ;; -- *) rmdirs="$rmdirs $objdir" ;; -+ *" $odir "*) ;; -+ *) func_append rmdirs " $odir" ;; - esac - fi - - # Don't error if the file doesn't exist and rm -f was used. -- if (test -L "$file") >/dev/null 2>&1 \ -- || (test -h "$file") >/dev/null 2>&1 \ -- || test -f "$file"; then -+ if { test -L "$file"; } >/dev/null 2>&1 || -+ { test -h "$file"; } >/dev/null 2>&1 || -+ test -f "$file"; then - : - elif test -d "$file"; then - exit_status=1 -@@ -4687,298 +9489,154 @@ - case $name in - *.la) - # Possibly a libtool archive, so verify it. -- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then -- . $dir/$name -+ if func_lalib_p "$file"; then -+ func_source $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do -- rmfiles="$rmfiles $objdir/$n" -+ func_append rmfiles " $odir/$n" - done -- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" -- test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" -+ test -n "$old_library" && func_append rmfiles " $odir/$old_library" - -- if test $mode = uninstall; then -+ case "$opt_mode" in -+ clean) -+ case " $library_names " in -+ *" $dlname "*) ;; -+ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; -+ esac -+ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" -+ ;; -+ uninstall) - if test -n "$library_names"; then - # Do each command in the postuninstall commands. -- eval cmds=\"$postuninstall_cmds\" -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- $show "$cmd" -- $run eval "$cmd" -- if test $? != 0 && test "$rmforce" != yes; then -- exit_status=1 -- fi -- done -- IFS="$save_ifs" -+ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. -- eval cmds=\"$old_postuninstall_cmds\" -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- $show "$cmd" -- $run eval "$cmd" -- if test $? != 0 && test "$rmforce" != yes; then -- exit_status=1 -- fi -- done -- IFS="$save_ifs" -+ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' - fi - # FIXME: should reinstall the best remaining shared library. -- fi -+ ;; -+ esac - fi - ;; - - *.lo) -- if test "$build_old_libs" = yes; then -- oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` -- rmfiles="$rmfiles $dir/$oldobj" -+ # Possibly a libtool object, so verify it. -+ if func_lalib_p "$file"; then -+ -+ # Read the .lo file -+ func_source $dir/$name -+ -+ # Add PIC object to the list of files to remove. -+ if test -n "$pic_object" && -+ test "$pic_object" != none; then -+ func_append rmfiles " $dir/$pic_object" -+ fi -+ -+ # Add non-PIC object to the list of files to remove. -+ if test -n "$non_pic_object" && -+ test "$non_pic_object" != none; then -+ func_append rmfiles " $dir/$non_pic_object" -+ fi - fi - ;; - - *) -- # Do a test to see if this is a libtool program. -- if test $mode = clean && -- (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then -- relink_command= -- . $dir/$file -+ if test "$opt_mode" = clean ; then -+ noexename=$name -+ case $file in -+ *.exe) -+ func_stripname '' '.exe' "$file" -+ file=$func_stripname_result -+ func_stripname '' '.exe' "$name" -+ noexename=$func_stripname_result -+ # $file with .exe has already been added to rmfiles, -+ # add $file without .exe -+ func_append rmfiles " $file" -+ ;; -+ esac -+ # Do a test to see if this is a libtool program. -+ if func_ltwrapper_p "$file"; then -+ if func_ltwrapper_executable_p "$file"; then -+ func_ltwrapper_scriptname "$file" -+ relink_command= -+ func_source $func_ltwrapper_scriptname_result -+ func_append rmfiles " $func_ltwrapper_scriptname_result" -+ else -+ relink_command= -+ func_source $dir/$noexename -+ fi - -- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" -- if test "$fast_install" = yes && test -n "$relink_command"; then -- rmfiles="$rmfiles $objdir/lt-$name" -+ # note $name still contains .exe if it was in $file originally -+ # as does the version of $file that was added into $rmfiles -+ func_append rmfiles " $odir/$name $odir/${name}S.${objext}" -+ if test "$fast_install" = yes && test -n "$relink_command"; then -+ func_append rmfiles " $odir/lt-$name" -+ fi -+ if test "X$noexename" != "X$name" ; then -+ func_append rmfiles " $odir/lt-${noexename}.c" -+ fi - fi - fi - ;; - esac -- $show "$rm $rmfiles" -- $run $rm $rmfiles || exit_status=1 -+ func_show_eval "$RM $rmfiles" 'exit_status=1' - done - - # Try to remove the ${objdir}s in the directories where we deleted files - for dir in $rmdirs; do - if test -d "$dir"; then -- $show "rmdir $dir" -- $run rmdir $dir >/dev/null 2>&1 -+ func_show_eval "rmdir $dir >/dev/null 2>&1" - fi - done - - exit $exit_status -- ;; -+} - -- "") -- $echo "$modename: you must specify a MODE" 1>&2 -- $echo "$generic_help" 1>&2 -- exit 1 -- ;; -- esac -+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && -+ func_mode_uninstall ${1+"$@"} - -- if test -z "$exec_cmd"; then -- $echo "$modename: invalid operation mode \`$mode'" 1>&2 -- $echo "$generic_help" 1>&2 -- exit 1 -- fi --fi # test -z "$show_help" -+test -z "$opt_mode" && { -+ help="$generic_help" -+ func_fatal_help "you must specify a MODE" -+} -+ -+test -z "$exec_cmd" && \ -+ func_fatal_help "invalid operation mode \`$opt_mode'" - - if test -n "$exec_cmd"; then -- eval exec $exec_cmd -- exit 1 -+ eval exec "$exec_cmd" -+ exit $EXIT_FAILURE - fi - --# We need to display help for each of the modes. --case $mode in --"") $echo \ --"Usage: $modename [OPTION]... [MODE-ARG]... -- --Provide generalized library-building support services. -- -- --config show all configuration variables -- --debug enable verbose shell tracing ---n, --dry-run display commands without modifying any files -- --features display basic configuration information and exit -- --finish same as \`--mode=finish' -- --help display this help message and exit -- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] -- --quiet same as \`--silent' -- --silent don't print informational messages -- --version print version information -- --MODE must be one of the following: -- -- clean remove files from the build directory -- compile compile a source file into a libtool object -- execute automatically set library path, then run a program -- finish complete the installation of libtool libraries -- install install libraries or executables -- link create a library or an executable -- uninstall remove libraries from an installed directory -- --MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for --a more detailed description of MODE." -- exit 0 -- ;; -- --clean) -- $echo \ --"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... -- --Remove files from the build directory. -- --RM is the name of the program to use to delete files associated with each FILE --(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed --to RM. -- --If FILE is a libtool library, object or program, all the files associated --with it are deleted. Otherwise, only FILE itself is deleted using RM." -- ;; -- --compile) -- $echo \ --"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE -- --Compile a source file into a libtool library object. -- --This mode accepts the following additional options: -- -- -o OUTPUT-FILE set the output file name to OUTPUT-FILE -- -prefer-pic try to building PIC objects only -- -prefer-non-pic try to building non-PIC objects only -- -static always build a \`.o' file suitable for static linking -- --COMPILE-COMMAND is a command to be used in creating a \`standard' object file --from the given SOURCEFILE. -- --The output file name is determined by removing the directory component from --SOURCEFILE, then substituting the C source code suffix \`.c' with the --library object suffix, \`.lo'." -- ;; -- --execute) -- $echo \ --"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... -- --Automatically set library path, then run a program. -- --This mode accepts the following additional options: -- -- -dlopen FILE add the directory containing FILE to the library path -- --This mode sets the library path environment variable according to \`-dlopen' --flags. -- --If any of the ARGS are libtool executable wrappers, then they are translated --into their corresponding uninstalled binary, and any of their required library --directories are added to the library path. -- --Then, COMMAND is executed, with ARGS as arguments." -- ;; -- --finish) -- $echo \ --"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... -- --Complete the installation of libtool libraries. -- --Each LIBDIR is a directory that contains libtool libraries. -- --The commands that this mode executes may require superuser privileges. Use --the \`--dry-run' option if you just want to see what would be executed." -- ;; -- --install) -- $echo \ --"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... -- --Install executables or libraries. -- --INSTALL-COMMAND is the installation command. The first component should be --either the \`install' or \`cp' program. -- --The rest of the components are interpreted as arguments to that command (only --BSD-compatible install options are recognized)." -- ;; -- --link) -- $echo \ --"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... -- --Link object files or libraries together to form another library, or to --create an executable program. -- --LINK-COMMAND is a command using the C compiler that you would use to create --a program from several object files. -- --The following components of LINK-COMMAND are treated specially: -- -- -all-static do not do any dynamic linking at all -- -avoid-version do not add a version suffix if possible -- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -- -export-symbols SYMFILE -- try to export only the symbols listed in SYMFILE -- -export-symbols-regex REGEX -- try to export only the symbols matching REGEX -- -LLIBDIR search LIBDIR for required installed libraries -- -lNAME OUTPUT-FILE requires the installed library libNAME -- -module build a library that can dlopened -- -no-fast-install disable the fast-install mode -- -no-install link a not-installable executable -- -no-undefined declare that a library does not refer to external symbols -- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -- -release RELEASE specify package release information -- -rpath LIBDIR the created library will eventually be installed in LIBDIR -- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -- -static do not do any dynamic linking of libtool libraries -- -version-info CURRENT[:REVISION[:AGE]] -- specify library version info [each variable defaults to 0] -- --All other options (arguments beginning with \`-') are ignored. -- --Every other argument is treated as a filename. Files ending in \`.la' are --treated as uninstalled libtool libraries, other files are standard or library --object files. -- --If the OUTPUT-FILE ends in \`.la', then a libtool library is created, --only library objects (\`.lo' files) may be specified, and \`-rpath' is --required, except when creating a convenience library. -- --If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created --using \`ar' and \`ranlib', or on Windows using \`lib'. -- --If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file --is created, otherwise an executable program is created." -- ;; -- --uninstall) -- $echo \ --"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... -- --Remove libraries from an installation directory. -- --RM is the name of the program to use to delete files associated with each FILE --(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed --to RM. -- --If FILE is a libtool library, all the files associated with it are deleted. --Otherwise, only FILE itself is deleted using RM." -- ;; -- --*) -- $echo "$modename: invalid operation mode \`$mode'" 1>&2 -- $echo "$help" 1>&2 -- exit 1 -- ;; --esac -+exit $exit_status - --echo --$echo "Try \`$modename --help' for more information about other modes." - --exit 0 -+# The TAGs below are defined such that we never get into a situation -+# in which we disable both kinds of libraries. Given conflicting -+# choices, we go for a static library, that is the most portable, -+# since we can't tell whether shared libraries were disabled because -+# the user asked for that or because the platform doesn't support -+# them. This is particularly important on AIX, because we don't -+# support having both static and shared libraries enabled at the same -+# time on that platform, so we default to a shared-only configuration. -+# If a disable-shared tag is given, we'll fallback to a static-only -+# configuration. But we'll never go from static-only to shared-only. -+ -+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared -+build_libtool_libs=no -+build_old_libs=yes -+# ### END LIBTOOL TAG CONFIG: disable-shared -+ -+# ### BEGIN LIBTOOL TAG CONFIG: disable-static -+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` -+# ### END LIBTOOL TAG CONFIG: disable-static - - # Local Variables: - # mode:shell-script - # sh-indentation:2 - # End: -+# vi:sw=2 -+ |