diff options
Diffstat (limited to 'debian/patches/018_nx-x11_update-libtool-ltmain-script.patch')
| -rw-r--r-- | debian/patches/018_nx-x11_update-libtool-ltmain-script.patch | 13979 |
1 files changed, 13979 insertions, 0 deletions
diff --git a/debian/patches/018_nx-x11_update-libtool-ltmain-script.patch b/debian/patches/018_nx-x11_update-libtool-ltmain-script.patch new file mode 100644 index 000000000..be4a44e71 --- /dev/null +++ b/debian/patches/018_nx-x11_update-libtool-ltmain-script.patch @@ -0,0 +1,13979 @@ +--- a/nx-X11/extras/expat/conftools/ltmain.sh ++++ b/nx-X11/extras/expat/conftools/ltmain.sh +@@ -1,4631 +1,9435 @@ +-# ltmain.sh - Provide generalized library-building support services. +-# NOTE: Changing this file will not affect anything until you rerun configure. +-# +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +-# Free Software Foundation, Inc. +-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 +-# +-# This program is free software; you can redistribute it and/or modify ++ ++# libtool (GNU libtool) 2.4 ++# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 ++ ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, ++# 2007, 2008, 2009, 2010 Free Software Foundation, Inc. ++# This is free software; see the source for copying conditions. There is NO ++# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ++ ++# GNU Libtool is free software; you can redistribute it and/or modify + # it under the terms of the GNU General Public License as published by + # the Free Software Foundation; either version 2 of the License, or + # (at your option) any later version. + # +-# This program is distributed in the hope that it will be useful, but ++# As a special exception to the GNU General Public License, ++# if you distribute this file as part of a program or library that ++# is built using GNU Libtool, you may include this file under the ++# same distribution terms that you use for the rest of that program. ++# ++# GNU Libtool is distributed in the hope that it will be useful, but + # WITHOUT ANY WARRANTY; without even the implied warranty of + # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + # General Public License for more details. + # + # You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# along with GNU Libtool; see the file COPYING. If not, a copy ++# can be downloaded from http://www.gnu.org/licenses/gpl.html, ++# or obtained by writing to the Free Software Foundation, Inc., ++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ ++# Usage: $progname [OPTION]... [MODE-ARG]... + # +-# As a special exception to the GNU General Public License, if you +-# distribute this file as part of a program that contains a +-# configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. +- +-# Check that we have a working $echo. +-if test "X$1" = X--no-reexec; then +- # Discard the --no-reexec flag, and continue. +- shift +-elif test "X$1" = X--fallback-echo; then +- # Avoid inline document here, it may be left over +- : +-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then +- # Yippee, $echo works! +- : ++# Provide generalized library-building support services. ++# ++# --config show all configuration variables ++# --debug enable verbose shell tracing ++# -n, --dry-run display commands without modifying any files ++# --features display basic configuration information and exit ++# --mode=MODE use operation mode MODE ++# --preserve-dup-deps don't remove duplicate dependency libraries ++# --quiet, --silent don't print informational messages ++# --no-quiet, --no-silent ++# print informational messages (default) ++# --tag=TAG use configuration variables from tag TAG ++# -v, --verbose print more informational messages than default ++# --no-verbose don't print the extra informational messages ++# --version print version information ++# -h, --help, --help-all print short, long, or detailed help message ++# ++# MODE must be one of the following: ++# ++# clean remove files from the build directory ++# compile compile a source file into a libtool object ++# execute automatically set library path, then run a program ++# finish complete the installation of libtool libraries ++# install install libraries or executables ++# link create a library or an executable ++# uninstall remove libraries from an installed directory ++# ++# MODE-ARGS vary depending on the MODE. When passed as first option, ++# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. ++# Try `$progname --help --mode=MODE' for a more detailed description of MODE. ++# ++# When reporting a bug, please describe a test case to reproduce it and ++# include the following information: ++# ++# host-triplet: $host ++# shell: $SHELL ++# compiler: $LTCC ++# compiler flags: $LTCFLAGS ++# linker: $LD (gnu? $with_gnu_ld) ++# $progname: (GNU libtool) 2.4 Debian-2.4-2 ++# automake: $automake_version ++# autoconf: $autoconf_version ++# ++# Report bugs to <bug-libtool@gnu.org>. ++# GNU libtool home page: <http://www.gnu.org/software/libtool/>. ++# General help using GNU software: <http://www.gnu.org/gethelp/>. ++ ++PROGRAM=libtool ++PACKAGE=libtool ++VERSION="2.4 Debian-2.4-2" ++TIMESTAMP="" ++package_revision=1.3293 ++ ++# Be Bourne compatible ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST + else +- # Restart under the correct shell, and then maybe $echo will work. +- exec $SHELL "$0" --no-reexec ${1+"$@"} ++ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac + fi ++BIN_SH=xpg4; export BIN_SH # for Tru64 ++DUALCASE=1; export DUALCASE # for MKS sh + +-if test "X$1" = X--fallback-echo; then +- # used as fallback echo +- shift +- cat <<EOF +-$* +-EOF +- exit 0 +-fi ++# A function that is used when there is no print builtin or printf. ++func_fallback_echo () ++{ ++ eval 'cat <<_LTECHO_EOF ++$1 ++_LTECHO_EOF' ++} + +-# The name of this program. +-progname=`$echo "$0" | sed 's%^.*/%%'` +-modename="$progname" ++# NLS nuisances: We save the old values to restore during execute mode. ++lt_user_locale= ++lt_safe_locale= ++for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES ++do ++ eval "if test \"\${$lt_var+set}\" = set; then ++ save_$lt_var=\$$lt_var ++ $lt_var=C ++ export $lt_var ++ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" ++ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" ++ fi" ++done ++LC_ALL=C ++LANGUAGE=C ++export LANGUAGE LC_ALL ++ ++$lt_unset CDPATH ++ ++ ++# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh ++# is ksh but when the shell is invoked as "sh" and the current value of ++# the _XPG environment variable is not equal to 1 (one), the special ++# positional parameter $0, within a function call, is the name of the ++# function. ++progpath="$0" + +-# Constants. +-PROGRAM=ltmain.sh +-PACKAGE=libtool +-VERSION=1.4.2 +-TIMESTAMP=" (1.922.2.53 2001/09/11 03:18:52)" + +-default_mode= +-help="Try \`$progname --help' for more information." +-magic="%%%MAGIC variable%%%" +-mkdir="mkdir" +-mv="mv -f" +-rm="rm -f" + +-# Sed substitution that helps us do robust quoting. It backslashifies +-# metacharacters that are still active within double-quoted strings. +-Xsed='sed -e 1s/^X//' +-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' +-SP2NL='tr \040 \012' +-NL2SP='tr \015\012 \040\040' +- +-# NLS nuisances. +-# Only set LANG and LC_ALL to C if already set. +-# These must not be set unconditionally because not all systems understand +-# e.g. LANG=C (notably SCO). +-# We save the old values to restore during execute mode. +-if test "${LC_ALL+set}" = set; then +- save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL +-fi +-if test "${LANG+set}" = set; then +- save_LANG="$LANG"; LANG=C; export LANG +-fi ++: ${CP="cp -f"} ++test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} ++: ${EGREP="/bin/grep -E"} ++: ${FGREP="/bin/grep -F"} ++: ${GREP="/bin/grep"} ++: ${LN_S="ln -s"} ++: ${MAKE="make"} ++: ${MKDIR="mkdir"} ++: ${MV="mv -f"} ++: ${RM="rm -f"} ++: ${SED="/bin/sed"} ++: ${SHELL="${CONFIG_SHELL-/bin/sh}"} ++: ${Xsed="$SED -e 1s/^X//"} ++ ++# Global variables: ++EXIT_SUCCESS=0 ++EXIT_FAILURE=1 ++EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. ++EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +-# Make sure IFS has a sensible default +-: ${IFS=" "} ++exit_status=$EXIT_SUCCESS + +-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then +- echo "$modename: not configured to build any kind of library" 1>&2 +- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 +- exit 1 +-fi ++# Make sure IFS has a sensible default ++lt_nl=' ++' ++IFS=" $lt_nl" ++ ++dirname="s,/[^/]*$,," ++basename="s,^.*/,," ++ ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" ++ fi ++} # func_dirname may be replaced by extended shell implementation + +-# Global variables. +-mode=$default_mode +-nonopt= +-prev= +-prevopt= +-run= +-show="$echo" +-show_help= +-execute_dlfiles= +-lo2o="s/\\.lo\$/.${objext}/" +-o2lo="s/\\.${objext}\$/.lo/" + +-# Parse our command line options once, thoroughly. +-while test $# -gt 0 +-do +- arg="$1" +- shift ++# func_basename file ++func_basename () ++{ ++ func_basename_result=`$ECHO "${1}" | $SED "$basename"` ++} # func_basename may be replaced by extended shell implementation ++ ++ ++# func_dirname_and_basename file append nondir_replacement ++# perform func_basename and func_dirname in a single function ++# call: ++# dirname: Compute the dirname of FILE. If nonempty, ++# add APPEND to the result, otherwise set result ++# to NONDIR_REPLACEMENT. ++# value returned in "$func_dirname_result" ++# basename: Compute filename of FILE. ++# value retuned in "$func_basename_result" ++# Implementation must be kept synchronized with func_dirname ++# and func_basename. For efficiency, we do not delegate to ++# those functions but instead duplicate the functionality here. ++func_dirname_and_basename () ++{ ++ # Extract subdirectory from the argument. ++ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" ++ fi ++ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` ++} # func_dirname_and_basename may be replaced by extended shell implementation + +- case $arg in +- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; +- *) optarg= ;; +- esac + +- # If the previous option needs an argument, assign it. +- if test -n "$prev"; then +- case $prev in +- execute_dlfiles) +- execute_dlfiles="$execute_dlfiles $arg" +- ;; +- *) +- eval "$prev=\$arg" +- ;; ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++# func_strip_suffix prefix name ++func_stripname () ++{ ++ case ${2} in ++ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; ++ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac ++} # func_stripname may be replaced by extended shell implementation + +- prev= +- prevopt= +- continue +- fi + +- # Have we seen a non-optional argument yet? +- case $arg in +- --help) +- show_help=yes ++# These SED scripts presuppose an absolute path with a trailing slash. ++pathcar='s,^/\([^/]*\).*$,\1,' ++pathcdr='s,^/[^/]*,,' ++removedotparts=':dotsl ++ s@/\./@/@g ++ t dotsl ++ s,/\.$,/,' ++collapseslashes='s@/\{1,\}@/@g' ++finalslash='s,/*$,/,' ++ ++# func_normal_abspath PATH ++# Remove doubled-up and trailing slashes, "." path components, ++# and cancel out any ".." path components in PATH after making ++# it an absolute path. ++# value returned in "$func_normal_abspath_result" ++func_normal_abspath () ++{ ++ # Start from root dir and reassemble the path. ++ func_normal_abspath_result= ++ func_normal_abspath_tpath=$1 ++ func_normal_abspath_altnamespace= ++ case $func_normal_abspath_tpath in ++ "") ++ # Empty path, that just means $cwd. ++ func_stripname '' '/' "`pwd`" ++ func_normal_abspath_result=$func_stripname_result ++ return + ;; +- +- --version) +- echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" +- exit 0 ++ # The next three entries are used to spot a run of precisely ++ # two leading slashes without using negated character classes; ++ # we take advantage of case's first-match behaviour. ++ ///*) ++ # Unusual form of absolute path, do nothing. + ;; +- +- --config) +- sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 +- exit 0 ++ //*) ++ # Not necessarily an ordinary path; POSIX reserves leading '//' ++ # and for example Cygwin uses it to access remote file shares ++ # over CIFS/SMB, so we conserve a leading double slash if found. ++ func_normal_abspath_altnamespace=/ + ;; +- +- --debug) +- echo "$progname: enabling shell trace mode" +- set -x ++ /*) ++ # Absolute path, do nothing. + ;; +- +- --dry-run | -n) +- run=: ++ *) ++ # Relative path, prepend $cwd. ++ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath + ;; +- +- --features) +- echo "host: $host" +- if test "$build_libtool_libs" = yes; then +- echo "enable shared libraries" +- else +- echo "disable shared libraries" +- fi +- if test "$build_old_libs" = yes; then +- echo "enable static libraries" +- else +- echo "disable static libraries" ++ esac ++ # Cancel out all the simple stuff to save iterations. We also want ++ # the path to end with a slash for ease of parsing, so make sure ++ # there is one (and only one) here. ++ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ ++ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` ++ while :; do ++ # Processed it all yet? ++ if test "$func_normal_abspath_tpath" = / ; then ++ # If we ascended to the root using ".." the result may be empty now. ++ if test -z "$func_normal_abspath_result" ; then ++ func_normal_abspath_result=/ ++ fi ++ break + fi +- exit 0 +- ;; ++ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ ++ -e "$pathcar"` ++ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ ++ -e "$pathcdr"` ++ # Figure out what to do with it ++ case $func_normal_abspath_tcomponent in ++ "") ++ # Trailing empty path component, ignore it. ++ ;; ++ ..) ++ # Parent dir; strip last assembled component from result. ++ func_dirname "$func_normal_abspath_result" ++ func_normal_abspath_result=$func_dirname_result ++ ;; ++ *) ++ # Actual path component, append it. ++ func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent ++ ;; ++ esac ++ done ++ # Restore leading double-slash if one was found on entry. ++ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result ++} + +- --finish) mode="finish" ;; ++# func_relative_path SRCDIR DSTDIR ++# generates a relative path from SRCDIR to DSTDIR, with a trailing ++# slash if non-empty, suitable for immediately appending a filename ++# without needing to append a separator. ++# value returned in "$func_relative_path_result" ++func_relative_path () ++{ ++ func_relative_path_result= ++ func_normal_abspath "$1" ++ func_relative_path_tlibdir=$func_normal_abspath_result ++ func_normal_abspath "$2" ++ func_relative_path_tbindir=$func_normal_abspath_result ++ ++ # Ascend the tree starting from libdir ++ while :; do ++ # check if we have found a prefix of bindir ++ case $func_relative_path_tbindir in ++ $func_relative_path_tlibdir) ++ # found an exact match ++ func_relative_path_tcancelled= ++ break ++ ;; ++ $func_relative_path_tlibdir*) ++ # found a matching prefix ++ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" ++ func_relative_path_tcancelled=$func_stripname_result ++ if test -z "$func_relative_path_result"; then ++ func_relative_path_result=. ++ fi ++ break ++ ;; ++ *) ++ func_dirname $func_relative_path_tlibdir ++ func_relative_path_tlibdir=${func_dirname_result} ++ if test "x$func_relative_path_tlibdir" = x ; then ++ # Have to descend all the way to the root! ++ func_relative_path_result=../$func_relative_path_result ++ func_relative_path_tcancelled=$func_relative_path_tbindir ++ break ++ fi ++ func_relative_path_result=../$func_relative_path_result ++ ;; ++ esac ++ done + +- --mode) prevopt="--mode" prev=mode ;; +- --mode=*) mode="$optarg" ;; ++ # Now calculate path; take care to avoid doubling-up slashes. ++ func_stripname '' '/' "$func_relative_path_result" ++ func_relative_path_result=$func_stripname_result ++ func_stripname '/' '/' "$func_relative_path_tcancelled" ++ if test "x$func_stripname_result" != x ; then ++ func_relative_path_result=${func_relative_path_result}/${func_stripname_result} ++ fi + +- --quiet | --silent) +- show=: +- ;; ++ # Normalisation. If bindir is libdir, return empty string, ++ # else relative path ending with a slash; either way, target ++ # file name can be directly appended. ++ if test ! -z "$func_relative_path_result"; then ++ func_stripname './' '' "$func_relative_path_result/" ++ func_relative_path_result=$func_stripname_result ++ fi ++} + +- -dlopen) +- prevopt="-dlopen" +- prev=execute_dlfiles +- ;; ++# The name of this program: ++func_dirname_and_basename "$progpath" ++progname=$func_basename_result ++ ++# Make sure we have an absolute path for reexecution: ++case $progpath in ++ [\\/]*|[A-Za-z]:\\*) ;; ++ *[\\/]*) ++ progdir=$func_dirname_result ++ progdir=`cd "$progdir" && pwd` ++ progpath="$progdir/$progname" ++ ;; ++ *) ++ save_IFS="$IFS" ++ IFS=: ++ for progdir in $PATH; do ++ IFS="$save_IFS" ++ test -x "$progdir/$progname" && break ++ done ++ IFS="$save_IFS" ++ test -n "$progdir" || progdir=`pwd` ++ progpath="$progdir/$progname" ++ ;; ++esac + +- -*) +- $echo "$modename: unrecognized option \`$arg'" 1>&2 +- $echo "$help" 1>&2 +- exit 1 +- ;; ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++Xsed="${SED}"' -e 1s/^X//' ++sed_quote_subst='s/\([`"$\\]\)/\\\1/g' + +- *) +- nonopt="$arg" +- break +- ;; +- esac +-done ++# Same as above, but do not quote variable references. ++double_quote_subst='s/\(["`\\]\)/\\\1/g' + +-if test -n "$prevopt"; then +- $echo "$modename: option \`$prevopt' requires an argument" 1>&2 +- $echo "$help" 1>&2 +- exit 1 +-fi ++# Sed substitution that turns a string into a regex matching for the ++# string literally. ++sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' ++ ++# Sed substitution that converts a w32 file name or path ++# which contains forward slashes, into one that contains ++# (escaped) backslashes. A very naive implementation. ++lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' ++ ++# Re-`\' parameter expansions in output of double_quote_subst that were ++# `\'-ed in input to the same. If an odd number of `\' preceded a '$' ++# in input to double_quote_subst, that '$' was protected from expansion. ++# Since each input `\' is now two `\'s, look for any number of runs of ++# four `\'s followed by two `\'s and then a '$'. `\' that '$'. ++bs='\\' ++bs2='\\\\' ++bs4='\\\\\\\\' ++dollar='\$' ++sed_double_backslash="\ ++ s/$bs4/&\\ ++/g ++ s/^$bs2$dollar/$bs&/ ++ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g ++ s/\n//g" ++ ++# Standard options: ++opt_dry_run=false ++opt_help=false ++opt_quiet=false ++opt_verbose=false ++opt_warning=: ++ ++# func_echo arg... ++# Echo program name prefixed message, along with the current mode ++# name if it has been set yet. ++func_echo () ++{ ++ $ECHO "$progname: ${opt_mode+$opt_mode: }$*" ++} + +-# If this variable is set in any of the actions, the command in it +-# will be execed at the end. This prevents here-documents from being +-# left over by shells. +-exec_cmd= ++# func_verbose arg... ++# Echo program name prefixed message in verbose mode only. ++func_verbose () ++{ ++ $opt_verbose && func_echo ${1+"$@"} ++ ++ # A bug in bash halts the script if the last line of a function ++ # fails when set -e is in force, so we need another command to ++ # work around that: ++ : ++} + +-if test -z "$show_help"; then ++# func_echo_all arg... ++# Invoke $ECHO with all args, space-separated. ++func_echo_all () ++{ ++ $ECHO "$*" ++} + +- # Infer the operation mode. +- if test -z "$mode"; then +- case $nonopt in +- *cc | *++ | gcc* | *-gcc*) +- mode=link +- for arg +- do +- case $arg in +- -c) +- mode=compile +- break +- ;; +- esac +- done +- ;; +- *db | *dbx | *strace | *truss) +- mode=execute +- ;; +- *install*|cp|mv) +- mode=install +- ;; +- *rm) +- mode=uninstall +- ;; +- *) +- # If we have no mode, but dlfiles were specified, then do execute mode. +- test -n "$execute_dlfiles" && mode=execute ++# func_error arg... ++# Echo program name prefixed message to standard error. ++func_error () ++{ ++ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 ++} + +- # Just use the default operation mode. +- if test -z "$mode"; then +- if test -n "$nonopt"; then +- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 +- else +- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 +- fi +- fi +- ;; +- esac +- fi ++# func_warning arg... ++# Echo program name prefixed warning message to standard error. ++func_warning () ++{ ++ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + +- # Only execute mode is allowed to have -dlopen flags. +- if test -n "$execute_dlfiles" && test "$mode" != execute; then +- $echo "$modename: unrecognized option \`-dlopen'" 1>&2 +- $echo "$help" 1>&2 +- exit 1 +- fi ++ # bash bug again: ++ : ++} + +- # Change the help message to a mode-specific one. +- generic_help="$help" +- help="Try \`$modename --help --mode=$mode' for more information." +- +- # These modes are in order of execution frequency so that they run quickly. +- case $mode in +- # libtool compile mode +- compile) +- modename="$modename: compile" +- # Get the compilation command and the source file. +- base_compile= +- prev= +- lastarg= +- srcfile="$nonopt" +- suppress_output= ++# func_fatal_error arg... ++# Echo program name prefixed message to standard error, and exit. ++func_fatal_error () ++{ ++ func_error ${1+"$@"} ++ exit $EXIT_FAILURE ++} + +- user_target=no +- for arg +- do +- case $prev in +- "") ;; +- xcompiler) +- # Aesthetically quote the previous argument. +- prev= +- lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` ++# func_fatal_help arg... ++# Echo program name prefixed message to standard error, followed by ++# a help hint, and exit. ++func_fatal_help () ++{ ++ func_error ${1+"$@"} ++ func_fatal_error "$help" ++} ++help="Try \`$progname --help' for more information." ## default + +- case $arg in +- # Double-quote args containing other shell metacharacters. +- # Many Bourne shells cannot handle close brackets correctly +- # in scan sets, so we specify it separately. +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac + +- # Add the previous argument to base_compile. +- if test -z "$base_compile"; then +- base_compile="$lastarg" +- else +- base_compile="$base_compile $lastarg" +- fi +- continue +- ;; ++# func_grep expression filename ++# Check whether EXPRESSION matches any line of FILENAME, without output. ++func_grep () ++{ ++ $GREP "$1" "$2" >/dev/null 2>&1 ++} ++ ++ ++# func_mkdir_p directory-path ++# Make sure the entire path to DIRECTORY-PATH is available. ++func_mkdir_p () ++{ ++ my_directory_path="$1" ++ my_dir_list= ++ ++ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then ++ ++ # Protect directory names starting with `-' ++ case $my_directory_path in ++ -*) my_directory_path="./$my_directory_path" ;; + esac + +- # Accept any command-line options. +- case $arg in +- -o) +- if test "$user_target" != "no"; then +- $echo "$modename: you cannot specify \`-o' more than once" 1>&2 +- exit 1 +- fi +- user_target=next +- ;; ++ # While some portion of DIR does not yet exist... ++ while test ! -d "$my_directory_path"; do ++ # ...make a list in topmost first order. Use a colon delimited ++ # list incase some portion of path contains whitespace. ++ my_dir_list="$my_directory_path:$my_dir_list" + +- -static) +- build_old_libs=yes +- continue +- ;; ++ # If the last portion added has no slash in it, the list is done ++ case $my_directory_path in */*) ;; *) break ;; esac + +- -prefer-pic) +- pic_mode=yes +- continue +- ;; ++ # ...otherwise throw away the child directory and loop ++ my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` ++ done ++ my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + +- -prefer-non-pic) +- pic_mode=no +- continue +- ;; ++ save_mkdir_p_IFS="$IFS"; IFS=':' ++ for my_dir in $my_dir_list; do ++ IFS="$save_mkdir_p_IFS" ++ # mkdir can fail with a `File exist' error if two processes ++ # try to create one of the directories concurrently. Don't ++ # stop in that case! ++ $MKDIR "$my_dir" 2>/dev/null || : ++ done ++ IFS="$save_mkdir_p_IFS" + +- -Xcompiler) +- prev=xcompiler +- continue +- ;; ++ # Bail out if we (or some other process) failed to create a directory. ++ test -d "$my_directory_path" || \ ++ func_fatal_error "Failed to create \`$1'" ++ fi ++} + +- -Wc,*) +- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` +- lastarg= +- save_ifs="$IFS"; IFS=',' +- for arg in $args; do +- IFS="$save_ifs" + +- # Double-quote args containing other shell metacharacters. +- # Many Bourne shells cannot handle close brackets correctly +- # in scan sets, so we specify it separately. +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- lastarg="$lastarg $arg" +- done +- IFS="$save_ifs" +- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` ++# func_mktempdir [string] ++# Make a temporary directory that won't clash with other running ++# libtool processes, and avoids race conditions if possible. If ++# given, STRING is the basename for that directory. ++func_mktempdir () ++{ ++ my_template="${TMPDIR-/tmp}/${1-$progname}" ++ ++ if test "$opt_dry_run" = ":"; then ++ # Return a directory name, but don't create it in dry-run mode ++ my_tmpdir="${my_template}-$$" ++ else + +- # Add the arguments to base_compile. +- if test -z "$base_compile"; then +- base_compile="$lastarg" +- else +- base_compile="$base_compile $lastarg" +- fi +- continue +- ;; +- esac ++ # If mktemp works, use that first and foremost ++ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + +- case $user_target in +- next) +- # The next one is the -o target name +- user_target=yes +- continue +- ;; +- yes) +- # We got the output file +- user_target=set +- libobj="$arg" +- continue +- ;; +- esac ++ if test ! -d "$my_tmpdir"; then ++ # Failing that, at least try and use $RANDOM to avoid a race ++ my_tmpdir="${my_template}-${RANDOM-0}$$" ++ ++ save_mktempdir_umask=`umask` ++ umask 0077 ++ $MKDIR "$my_tmpdir" ++ umask $save_mktempdir_umask ++ fi ++ ++ # If we're not in dry-run mode, bomb out on failure ++ test -d "$my_tmpdir" || \ ++ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" ++ fi + +- # Accept the current argument as the source file. +- lastarg="$srcfile" +- srcfile="$arg" ++ $ECHO "$my_tmpdir" ++} + +- # Aesthetically quote the previous argument. + +- # Backslashify any backslashes, double quotes, and dollar signs. +- # These are the only characters that are still specially +- # interpreted inside of double-quoted scrings. +- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` ++# func_quote_for_eval arg ++# Aesthetically quote ARG to be evaled later. ++# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT ++# is double-quoted, suitable for a subsequent eval, whereas ++# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters ++# which are still active within double quotes backslashified. ++func_quote_for_eval () ++{ ++ case $1 in ++ *[\\\`\"\$]*) ++ func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; ++ *) ++ func_quote_for_eval_unquoted_result="$1" ;; ++ esac + +- # Double-quote args containing other shell metacharacters. ++ case $func_quote_for_eval_unquoted_result in ++ # Double-quote args containing shell metacharacters to delay ++ # word splitting, command substitution and and variable ++ # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. +- case $lastarg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- lastarg="\"$lastarg\"" +- ;; +- esac ++ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" ++ ;; ++ *) ++ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" ++ esac ++} + +- # Add the previous argument to base_compile. +- if test -z "$base_compile"; then +- base_compile="$lastarg" +- else +- base_compile="$base_compile $lastarg" +- fi +- done + +- case $user_target in +- set) +- ;; +- no) +- # Get the name of the library object. +- libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` +- ;; +- *) +- $echo "$modename: you must specify a target with \`-o'" 1>&2 +- exit 1 +- ;; ++# func_quote_for_expand arg ++# Aesthetically quote ARG to be evaled later; same as above, ++# but do not quote variable references. ++func_quote_for_expand () ++{ ++ case $1 in ++ *[\\\`\"]*) ++ my_arg=`$ECHO "$1" | $SED \ ++ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; ++ *) ++ my_arg="$1" ;; + esac + +- # Recognize several different file suffixes. +- # If the user specifies -o file.o, it is replaced with file.lo +- xform='[cCFSfmso]' +- case $libobj in +- *.ada) xform=ada ;; +- *.adb) xform=adb ;; +- *.ads) xform=ads ;; +- *.asm) xform=asm ;; +- *.c++) xform=c++ ;; +- *.cc) xform=cc ;; +- *.cpp) xform=cpp ;; +- *.cxx) xform=cxx ;; +- *.f90) xform=f90 ;; +- *.for) xform=for ;; ++ case $my_arg in ++ # Double-quote args containing shell metacharacters to delay ++ # word splitting and command substitution for a subsequent eval. ++ # Many Bourne shells cannot handle close brackets correctly ++ # in scan sets, so we specify it separately. ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ my_arg="\"$my_arg\"" ++ ;; + esac + +- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` ++ func_quote_for_expand_result="$my_arg" ++} + +- case $libobj in +- *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; +- *) +- $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 +- exit 1 +- ;; +- esac + +- if test -z "$base_compile"; then +- $echo "$modename: you must specify a compilation command" 1>&2 +- $echo "$help" 1>&2 +- exit 1 ++# func_show_eval cmd [fail_exp] ++# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is ++# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP ++# is given, then evaluate it. ++func_show_eval () ++{ ++ my_cmd="$1" ++ my_fail_exp="${2-:}" ++ ++ ${opt_silent-false} || { ++ func_quote_for_expand "$my_cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ ++ if ${opt_dry_run-false}; then :; else ++ eval "$my_cmd" ++ my_status=$? ++ if test "$my_status" -eq 0; then :; else ++ eval "(exit $my_status); $my_fail_exp" ++ fi + fi ++} + +- # Delete any leftover library objects. +- if test "$build_old_libs" = yes; then +- removelist="$obj $libobj" +- else +- removelist="$libobj" ++ ++# func_show_eval_locale cmd [fail_exp] ++# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is ++# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP ++# is given, then evaluate it. Use the saved locale for evaluation. ++func_show_eval_locale () ++{ ++ my_cmd="$1" ++ my_fail_exp="${2-:}" ++ ++ ${opt_silent-false} || { ++ func_quote_for_expand "$my_cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ ++ if ${opt_dry_run-false}; then :; else ++ eval "$lt_user_locale ++ $my_cmd" ++ my_status=$? ++ eval "$lt_safe_locale" ++ if test "$my_status" -eq 0; then :; else ++ eval "(exit $my_status); $my_fail_exp" ++ fi + fi ++} + +- $run $rm $removelist +- trap "$run $rm $removelist; exit 1" 1 2 15 ++# func_tr_sh ++# Turn $1 into a string suitable for a shell variable name. ++# Result is stored in $func_tr_sh_result. All characters ++# not in the set a-zA-Z0-9_ are replaced with '_'. Further, ++# if $1 begins with a digit, a '_' is prepended as well. ++func_tr_sh () ++{ ++ case $1 in ++ [0-9]* | *[!a-zA-Z0-9_]*) ++ func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` ++ ;; ++ * ) ++ func_tr_sh_result=$1 ++ ;; ++ esac ++} + +- # On Cygwin there's no "real" PIC flag so we must build both object types +- case $host_os in +- cygwin* | mingw* | pw32* | os2*) +- pic_mode=default +- ;; +- esac +- if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then +- # non-PIC code in shared libraries is not supported +- pic_mode=default +- fi + +- # Calculate the filename of the output object if compiler does +- # not support -o with -c +- if test "$compiler_c_o" = no; then +- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} +- lockfile="$output_obj.lock" +- removelist="$removelist $output_obj $lockfile" +- trap "$run $rm $removelist; exit 1" 1 2 15 +- else +- need_locks=no +- lockfile= +- fi ++# func_version ++# Echo version message to standard output and exit. ++func_version () ++{ ++ $opt_debug ++ ++ $SED -n '/(C)/!b go ++ :more ++ /\./!{ ++ N ++ s/\n# / / ++ b more ++ } ++ :go ++ /^# '$PROGRAM' (GNU /,/# warranty; / { ++ s/^# // ++ s/^# *$// ++ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ ++ p ++ }' < "$progpath" ++ exit $? ++} + +- # Lock this critical section if it is needed +- # We use this script file to make the link, it avoids creating a new file +- if test "$need_locks" = yes; then +- until $run ln "$0" "$lockfile" 2>/dev/null; do +- $show "Waiting for $lockfile to be removed" +- sleep 2 +- done +- elif test "$need_locks" = warn; then +- if test -f "$lockfile"; then +- echo "\ +-*** ERROR, $lockfile exists and contains: +-`cat $lockfile 2>/dev/null` ++# func_usage ++# Echo short help message to standard output and exit. ++func_usage () ++{ ++ $opt_debug ++ ++ $SED -n '/^# Usage:/,/^# *.*--help/ { ++ s/^# // ++ s/^# *$// ++ s/\$progname/'$progname'/ ++ p ++ }' < "$progpath" ++ echo ++ $ECHO "run \`$progname --help | more' for full usage" ++ exit $? ++} + +-This indicates that another process is trying to use the same +-temporary object file, and libtool could not work around it because +-your compiler does not support \`-c' and \`-o' together. If you +-repeat this compilation, it may succeed, by chance, but you had better +-avoid parallel builds (make -j) in this platform, or get a better +-compiler." +- +- $run $rm $removelist +- exit 1 +- fi +- echo $srcfile > "$lockfile" ++# func_help [NOEXIT] ++# Echo long help message to standard output and exit, ++# unless 'noexit' is passed as argument. ++func_help () ++{ ++ $opt_debug ++ ++ $SED -n '/^# Usage:/,/# Report bugs to/ { ++ :print ++ s/^# // ++ s/^# *$// ++ s*\$progname*'$progname'* ++ s*\$host*'"$host"'* ++ s*\$SHELL*'"$SHELL"'* ++ s*\$LTCC*'"$LTCC"'* ++ s*\$LTCFLAGS*'"$LTCFLAGS"'* ++ s*\$LD*'"$LD"'* ++ s/\$with_gnu_ld/'"$with_gnu_ld"'/ ++ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ ++ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ ++ p ++ d ++ } ++ /^# .* home page:/b print ++ /^# General help using/b print ++ ' < "$progpath" ++ ret=$? ++ if test -z "$1"; then ++ exit $ret + fi ++} + +- if test -n "$fix_srcfile_path"; then +- eval srcfile=\"$fix_srcfile_path\" +- fi ++# func_missing_arg argname ++# Echo program name prefixed message to standard error and set global ++# exit_cmd. ++func_missing_arg () ++{ ++ $opt_debug + +- # Only build a PIC object if we are building libtool libraries. +- if test "$build_libtool_libs" = yes; then +- # Without this assignment, base_compile gets emptied. +- fbsd_hideous_sh_bug=$base_compile ++ func_error "missing argument for $1." ++ exit_cmd=exit ++} + +- if test "$pic_mode" != no; then +- # All platforms use -DPIC, to notify preprocessed assembler code. +- command="$base_compile $srcfile $pic_flag -DPIC" +- else +- # Don't build PIC code +- command="$base_compile $srcfile" +- fi +- if test "$build_old_libs" = yes; then +- lo_libobj="$libobj" +- dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$dir" = "X$libobj"; then +- dir="$objdir" +- else +- dir="$dir/$objdir" +- fi +- libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` + +- if test -d "$dir"; then +- $show "$rm $libobj" +- $run $rm $libobj +- else +- $show "$mkdir $dir" +- $run $mkdir $dir +- status=$? +- if test $status -ne 0 && test ! -d $dir; then +- exit $status +- fi +- fi +- fi +- if test "$compiler_o_lo" = yes; then +- output_obj="$libobj" +- command="$command -o $output_obj" +- elif test "$compiler_c_o" = yes; then +- output_obj="$obj" +- command="$command -o $output_obj" +- fi ++# func_split_short_opt shortopt ++# Set func_split_short_opt_name and func_split_short_opt_arg shell ++# variables after splitting SHORTOPT after the 2nd character. ++func_split_short_opt () ++{ ++ my_sed_short_opt='1s/^\(..\).*$/\1/;q' ++ my_sed_short_rest='1s/^..\(.*\)$/\1/;q' ++ ++ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` ++ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` ++} # func_split_short_opt may be replaced by extended shell implementation ++ ++ ++# func_split_long_opt longopt ++# Set func_split_long_opt_name and func_split_long_opt_arg shell ++# variables after splitting LONGOPT at the `=' sign. ++func_split_long_opt () ++{ ++ my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' ++ my_sed_long_arg='1s/^--[^=]*=//' ++ ++ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` ++ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` ++} # func_split_long_opt may be replaced by extended shell implementation + +- $run $rm "$output_obj" +- $show "$command" +- if $run eval "$command"; then : +- else +- test -n "$output_obj" && $run $rm $removelist +- exit 1 +- fi ++exit_cmd=: + +- if test "$need_locks" = warn && +- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then +- echo "\ +-*** ERROR, $lockfile contains: +-`cat $lockfile 2>/dev/null` + +-but it should contain: +-$srcfile + +-This indicates that another process is trying to use the same +-temporary object file, and libtool could not work around it because +-your compiler does not support \`-c' and \`-o' together. If you +-repeat this compilation, it may succeed, by chance, but you had better +-avoid parallel builds (make -j) in this platform, or get a better +-compiler." + +- $run $rm $removelist +- exit 1 +- fi + +- # Just move the object if needed, then go on to compile the next one +- if test x"$output_obj" != x"$libobj"; then +- $show "$mv $output_obj $libobj" +- if $run $mv $output_obj $libobj; then : +- else +- error=$? +- $run $rm $removelist +- exit $error +- fi +- fi ++magic="%%%MAGIC variable%%%" ++magic_exe="%%%MAGIC EXE variable%%%" + +- # If we have no pic_flag, then copy the object into place and finish. +- if (test -z "$pic_flag" || test "$pic_mode" != default) && +- test "$build_old_libs" = yes; then +- # Rename the .lo from within objdir to obj +- if test -f $obj; then +- $show $rm $obj +- $run $rm $obj +- fi ++# Global variables. ++nonopt= ++preserve_args= ++lo2o="s/\\.lo\$/.${objext}/" ++o2lo="s/\\.${objext}\$/.lo/" ++extracted_archives= ++extracted_serial=0 + +- $show "$mv $libobj $obj" +- if $run $mv $libobj $obj; then : +- else +- error=$? +- $run $rm $removelist +- exit $error +- fi ++# If this variable is set in any of the actions, the command in it ++# will be execed at the end. This prevents here-documents from being ++# left over by shells. ++exec_cmd= + +- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$obj"; then +- xdir="." +- else +- xdir="$xdir" +- fi +- baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"` +- libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` +- # Now arrange that obj and lo_libobj become the same file +- $show "(cd $xdir && $LN_S $baseobj $libobj)" +- if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then +- # Unlock the critical section if it was locked +- if test "$need_locks" != no; then +- $run $rm "$lockfile" +- fi +- exit 0 +- else +- error=$? +- $run $rm $removelist +- exit $error +- fi +- fi ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "${1}=\$${1}\${2}" ++} # func_append may be replaced by extended shell implementation ++ ++# func_append_quoted var value ++# Quote VALUE and append to the end of shell variable VAR, separated ++# by a space. ++func_append_quoted () ++{ ++ func_quote_for_eval "${2}" ++ eval "${1}=\$${1}\\ \$func_quote_for_eval_result" ++} # func_append_quoted may be replaced by extended shell implementation ++ ++ ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=`expr "${@}"` ++} # func_arith may be replaced by extended shell implementation ++ ++ ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` ++} # func_len may be replaced by extended shell implementation ++ ++ ++# func_lo2o object ++func_lo2o () ++{ ++ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` ++} # func_lo2o may be replaced by extended shell implementation ++ ++ ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` ++} # func_xform may be replaced by extended shell implementation ++ ++ ++# func_fatal_configuration arg... ++# Echo program name prefixed message to standard error, followed by ++# a configuration failure hint, and exit. ++func_fatal_configuration () ++{ ++ func_error ${1+"$@"} ++ func_error "See the $PACKAGE documentation for more information." ++ func_fatal_error "Fatal configuration error." ++} + +- # Allow error messages only from the first compilation. +- suppress_output=' >/dev/null 2>&1' +- fi + +- # Only build a position-dependent object if we build old libraries. ++# func_config ++# Display the configuration for all the tags in this script. ++func_config () ++{ ++ re_begincf='^# ### BEGIN LIBTOOL' ++ re_endcf='^# ### END LIBTOOL' ++ ++ # Default configuration. ++ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" ++ ++ # Now print the configurations for the tags. ++ for tagname in $taglist; do ++ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" ++ done ++ ++ exit $? ++} ++ ++# func_features ++# Display the features supported by this script. ++func_features () ++{ ++ echo "host: $host" ++ if test "$build_libtool_libs" = yes; then ++ echo "enable shared libraries" ++ else ++ echo "disable shared libraries" ++ fi + if test "$build_old_libs" = yes; then +- if test "$pic_mode" != yes; then +- # Don't build PIC code +- command="$base_compile $srcfile" ++ echo "enable static libraries" ++ else ++ echo "disable static libraries" ++ fi ++ ++ exit $? ++} ++ ++# func_enable_tag tagname ++# Verify that TAGNAME is valid, and either flag an error and exit, or ++# enable the TAGNAME tag. We also add TAGNAME to the global $taglist ++# variable here. ++func_enable_tag () ++{ ++ # Global variable: ++ tagname="$1" ++ ++ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" ++ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" ++ sed_extractcf="/$re_begincf/,/$re_endcf/p" ++ ++ # Validate tagname. ++ case $tagname in ++ *[!-_A-Za-z0-9,/]*) ++ func_fatal_error "invalid tag name: $tagname" ++ ;; ++ esac ++ ++ # Don't test for the "default" C tag, as we know it's ++ # there but not specially marked. ++ case $tagname in ++ CC) ;; ++ *) ++ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then ++ taglist="$taglist $tagname" ++ ++ # Evaluate the configuration. Be careful to quote the path ++ # and the sed script, to avoid splitting on whitespace, but ++ # also don't use non-portable quotes within backquotes within ++ # quotes we have to do it in 2 steps: ++ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` ++ eval "$extractedcf" + else +- # All platforms use -DPIC, to notify preprocessed assembler code. +- command="$base_compile $srcfile $pic_flag -DPIC" +- fi +- if test "$compiler_c_o" = yes; then +- command="$command -o $obj" +- output_obj="$obj" ++ func_error "ignoring unknown tag $tagname" + fi ++ ;; ++ esac ++} + +- # Suppress compiler output if we already did a PIC compilation. +- command="$command$suppress_output" +- $run $rm "$output_obj" +- $show "$command" +- if $run eval "$command"; then : ++# func_check_version_match ++# Ensure that we are using m4 macros, and libtool script from the same ++# release of libtool. ++func_check_version_match () ++{ ++ if test "$package_revision" != "$macro_revision"; then ++ if test "$VERSION" != "$macro_version"; then ++ if test -z "$macro_version"; then ++ cat >&2 <<_LT_EOF ++$progname: Version mismatch error. This is $PACKAGE $VERSION, but the ++$progname: definition of this LT_INIT comes from an older release. ++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION ++$progname: and run autoconf again. ++_LT_EOF + else +- $run $rm $removelist +- exit 1 ++ cat >&2 <<_LT_EOF ++$progname: Version mismatch error. This is $PACKAGE $VERSION, but the ++$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. ++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION ++$progname: and run autoconf again. ++_LT_EOF + fi ++ else ++ cat >&2 <<_LT_EOF ++$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, ++$progname: but the definition of this LT_INIT comes from revision $macro_revision. ++$progname: You should recreate aclocal.m4 with macros from revision $package_revision ++$progname: of $PACKAGE $VERSION and run autoconf again. ++_LT_EOF ++ fi + +- if test "$need_locks" = warn && +- test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then +- echo "\ +-*** ERROR, $lockfile contains: +-`cat $lockfile 2>/dev/null` ++ exit $EXIT_MISMATCH ++ fi ++} + +-but it should contain: +-$srcfile + +-This indicates that another process is trying to use the same +-temporary object file, and libtool could not work around it because +-your compiler does not support \`-c' and \`-o' together. If you +-repeat this compilation, it may succeed, by chance, but you had better +-avoid parallel builds (make -j) in this platform, or get a better +-compiler." ++# Shorthand for --mode=foo, only valid as the first argument ++case $1 in ++clean|clea|cle|cl) ++ shift; set dummy --mode clean ${1+"$@"}; shift ++ ;; ++compile|compil|compi|comp|com|co|c) ++ shift; set dummy --mode compile ${1+"$@"}; shift ++ ;; ++execute|execut|execu|exec|exe|ex|e) ++ shift; set dummy --mode execute ${1+"$@"}; shift ++ ;; ++finish|finis|fini|fin|fi|f) ++ shift; set dummy --mode finish ${1+"$@"}; shift ++ ;; ++install|instal|insta|inst|ins|in|i) ++ shift; set dummy --mode install ${1+"$@"}; shift ++ ;; ++link|lin|li|l) ++ shift; set dummy --mode link ${1+"$@"}; shift ++ ;; ++uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) ++ shift; set dummy --mode uninstall ${1+"$@"}; shift ++ ;; ++esac + +- $run $rm $removelist +- exit 1 +- fi + +- # Just move the object if needed +- if test x"$output_obj" != x"$obj"; then +- $show "$mv $output_obj $obj" +- if $run $mv $output_obj $obj; then : +- else +- error=$? +- $run $rm $removelist +- exit $error +- fi +- fi + +- # Create an invalid libtool object if no PIC, so that we do not +- # accidentally link it into a program. +- if test "$build_libtool_libs" != yes; then +- $show "echo timestamp > $libobj" +- $run eval "echo timestamp > \$libobj" || exit $? +- else +- # Move the .lo from within objdir +- $show "$mv $libobj $lo_libobj" +- if $run $mv $libobj $lo_libobj; then : +- else +- error=$? +- $run $rm $removelist +- exit $error +- fi +- fi +- fi ++# Option defaults: ++opt_debug=: ++opt_dry_run=false ++opt_config=false ++opt_preserve_dup_deps=false ++opt_features=false ++opt_finish=false ++opt_help=false ++opt_help_all=false ++opt_silent=: ++opt_verbose=: ++opt_silent=false ++opt_verbose=false ++ ++ ++# Parse options once, thoroughly. This comes as soon as possible in the ++# script to make things like `--version' happen as quickly as we can. ++{ ++ # this just eases exit handling ++ while test $# -gt 0; do ++ opt="$1" ++ shift ++ case $opt in ++ --debug|-x) opt_debug='set -x' ++ func_echo "enabling shell trace mode" ++ $opt_debug ++ ;; ++ --dry-run|--dryrun|-n) ++ opt_dry_run=: ++ ;; ++ --config) ++ opt_config=: ++func_config ++ ;; ++ --dlopen|-dlopen) ++ optarg="$1" ++ opt_dlopen="${opt_dlopen+$opt_dlopen ++}$optarg" ++ shift ++ ;; ++ --preserve-dup-deps) ++ opt_preserve_dup_deps=: ++ ;; ++ --features) ++ opt_features=: ++func_features ++ ;; ++ --finish) ++ opt_finish=: ++set dummy --mode finish ${1+"$@"}; shift ++ ;; ++ --help) ++ opt_help=: ++ ;; ++ --help-all) ++ opt_help_all=: ++opt_help=': help-all' ++ ;; ++ --mode) ++ test $# = 0 && func_missing_arg $opt && break ++ optarg="$1" ++ opt_mode="$optarg" ++case $optarg in ++ # Valid mode arguments: ++ clean|compile|execute|finish|install|link|relink|uninstall) ;; ++ ++ # Catch anything else as an error ++ *) func_error "invalid argument for $opt" ++ exit_cmd=exit ++ break ++ ;; ++esac ++ shift ++ ;; ++ --no-silent|--no-quiet) ++ opt_silent=false ++func_append preserve_args " $opt" ++ ;; ++ --no-verbose) ++ opt_verbose=false ++func_append preserve_args " $opt" ++ ;; ++ --silent|--quiet) ++ opt_silent=: ++func_append preserve_args " $opt" ++ opt_verbose=false ++ ;; ++ --verbose|-v) ++ opt_verbose=: ++func_append preserve_args " $opt" ++opt_silent=false ++ ;; ++ --tag) ++ test $# = 0 && func_missing_arg $opt && break ++ optarg="$1" ++ opt_tag="$optarg" ++func_append preserve_args " $opt $optarg" ++func_enable_tag "$optarg" ++ shift ++ ;; ++ ++ -\?|-h) func_usage ;; ++ --help) func_help ;; ++ --version) func_version ;; ++ ++ # Separate optargs to long options: ++ --*=*) ++ func_split_long_opt "$opt" ++ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} ++ shift ++ ;; ++ ++ # Separate non-argument short options: ++ -\?*|-h*|-n*|-v*) ++ func_split_short_opt "$opt" ++ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} ++ shift ++ ;; ++ ++ --) break ;; ++ -*) func_fatal_help "unrecognized option \`$opt'" ;; ++ *) set dummy "$opt" ${1+"$@"}; shift; break ;; ++ esac ++ done + +- # Unlock the critical section if it was locked +- if test "$need_locks" != no; then +- $run $rm "$lockfile" +- fi ++ # Validate options: + +- exit 0 +- ;; ++ # save first non-option argument ++ if test "$#" -gt 0; then ++ nonopt="$opt" ++ shift ++ fi + +- # libtool link mode +- link | relink) +- modename="$modename: link" +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) +- # It is impossible to link a dll without this setting, and +- # we shouldn't force the makefile maintainer to figure out +- # which system we are compiling for in order to pass an extra +- # flag for every libtool invokation. +- # allow_undefined=no ++ # preserve --debug ++ test "$opt_debug" = : || func_append preserve_args " --debug" + +- # FIXME: Unfortunately, there are problems with the above when trying +- # to make a dll which has undefined symbols, in which case not +- # even a static library is built. For now, we need to specify +- # -no-undefined on the libtool link line when we can be certain +- # that all symbols are satisfied, otherwise we get a static library. +- allow_undefined=yes ++ case $host in ++ *cygwin* | *mingw* | *pw32* | *cegcc*) ++ # don't eliminate duplications in $postdeps and $predeps ++ opt_duplicate_compiler_generated_deps=: + ;; + *) +- allow_undefined=yes ++ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + ;; ++ esac ++ ++ $opt_help || { ++ # Sanity checks first: ++ func_check_version_match ++ ++ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then ++ func_fatal_configuration "not configured to build any kind of library" ++ fi ++ ++ # Darwin sucks ++ eval std_shrext=\"$shrext_cmds\" ++ ++ # Only execute mode is allowed to have -dlopen flags. ++ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then ++ func_error "unrecognized option \`-dlopen'" ++ $ECHO "$help" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ # Change the help message to a mode-specific one. ++ generic_help="$help" ++ help="Try \`$progname --help --mode=$opt_mode' for more information." ++ } ++ ++ ++ # Bail if the options were screwed ++ $exit_cmd $EXIT_FAILURE ++} ++ ++ ++ ++ ++## ----------- ## ++## Main. ## ++## ----------- ## ++ ++# func_lalib_p file ++# True iff FILE is a libtool `.la' library or `.lo' object file. ++# This function is only a basic sanity check; it will hardly flush out ++# determined imposters. ++func_lalib_p () ++{ ++ test -f "$1" && ++ $SED -e 4q "$1" 2>/dev/null \ ++ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 ++} ++ ++# func_lalib_unsafe_p file ++# True iff FILE is a libtool `.la' library or `.lo' object file. ++# This function implements the same check as func_lalib_p without ++# resorting to external programs. To this end, it redirects stdin and ++# closes it afterwards, without saving the original file descriptor. ++# As a safety measure, use it only where a negative result would be ++# fatal anyway. Works if `file' does not exist. ++func_lalib_unsafe_p () ++{ ++ lalib_p=no ++ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then ++ for lalib_p_l in 1 2 3 4 ++ do ++ read lalib_p_line ++ case "$lalib_p_line" in ++ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; ++ esac ++ done ++ exec 0<&5 5<&- ++ fi ++ test "$lalib_p" = yes ++} ++ ++# func_ltwrapper_script_p file ++# True iff FILE is a libtool wrapper script ++# This function is only a basic sanity check; it will hardly flush out ++# determined imposters. ++func_ltwrapper_script_p () ++{ ++ func_lalib_p "$1" ++} ++ ++# func_ltwrapper_executable_p file ++# True iff FILE is a libtool wrapper executable ++# This function is only a basic sanity check; it will hardly flush out ++# determined imposters. ++func_ltwrapper_executable_p () ++{ ++ func_ltwrapper_exec_suffix= ++ case $1 in ++ *.exe) ;; ++ *) func_ltwrapper_exec_suffix=.exe ;; + esac +- libtool_args="$nonopt" +- compile_command="$nonopt" +- finalize_command="$nonopt" ++ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 ++} + +- compile_rpath= +- finalize_rpath= +- compile_shlibpath= +- finalize_shlibpath= +- convenience= +- old_convenience= +- deplibs= +- old_deplibs= +- compiler_flags= +- linker_flags= +- dllsearchpath= +- lib_search_path=`pwd` ++# func_ltwrapper_scriptname file ++# Assumes file is an ltwrapper_executable ++# uses $file to determine the appropriate filename for a ++# temporary ltwrapper_script. ++func_ltwrapper_scriptname () ++{ ++ func_dirname_and_basename "$1" "" "." ++ func_stripname '' '.exe' "$func_basename_result" ++ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" ++} + +- avoid_version=no +- dlfiles= +- dlprefiles= +- dlself=no +- export_dynamic=no +- export_symbols= +- export_symbols_regex= +- generated= +- libobjs= +- ltlibs= +- module=no +- no_install=no +- objs= +- prefer_static_libs=no +- preload=no +- prev= +- prevarg= +- release= +- rpath= +- xrpath= +- perm_rpath= +- temp_rpath= +- thread_safe=no +- vinfo= ++# func_ltwrapper_p file ++# True iff FILE is a libtool wrapper script or wrapper executable ++# This function is only a basic sanity check; it will hardly flush out ++# determined imposters. ++func_ltwrapper_p () ++{ ++ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" ++} + +- # We need to know -static, to get the right output filenames. +- for arg +- do +- case $arg in +- -all-static | -static) +- if test "X$arg" = "X-all-static"; then +- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then +- $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 +- fi +- if test -n "$link_static_flag"; then +- dlopen_self=$dlopen_self_static +- fi +- else +- if test -z "$pic_flag" && test -n "$link_static_flag"; then +- dlopen_self=$dlopen_self_static +- fi +- fi +- build_libtool_libs=no +- build_old_libs=yes +- prefer_static_libs=yes +- break +- ;; +- esac ++ ++# func_execute_cmds commands fail_cmd ++# Execute tilde-delimited COMMANDS. ++# If FAIL_CMD is given, eval that upon failure. ++# FAIL_CMD may read-access the current command in variable CMD! ++func_execute_cmds () ++{ ++ $opt_debug ++ save_ifs=$IFS; IFS='~' ++ for cmd in $1; do ++ IFS=$save_ifs ++ eval cmd=\"$cmd\" ++ func_show_eval "$cmd" "${2-:}" + done ++ IFS=$save_ifs ++} + +- # See if our shared archives depend on static archives. +- test -n "$old_archive_from_new_cmds" && build_old_libs=yes + +- # Go through the arguments, transforming them on the way. +- while test $# -gt 0; do +- arg="$1" +- shift +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test +- ;; +- *) qarg=$arg ;; +- esac +- libtool_args="$libtool_args $qarg" ++# func_source file ++# Source FILE, adding directory component if necessary. ++# Note that it is not necessary on cygwin/mingw to append a dot to ++# FILE even if both FILE and FILE.exe exist: automatic-append-.exe ++# behavior happens only for exec(3), not for open(2)! Also, sourcing ++# `FILE.' does not work on cygwin managed mounts. ++func_source () ++{ ++ $opt_debug ++ case $1 in ++ */* | *\\*) . "$1" ;; ++ *) . "./$1" ;; ++ esac ++} + +- # If the previous option needs an argument, assign it. +- if test -n "$prev"; then +- case $prev in +- output) +- compile_command="$compile_command @OUTPUT@" +- finalize_command="$finalize_command @OUTPUT@" +- ;; +- esac + +- case $prev in +- dlfiles|dlprefiles) +- if test "$preload" = no; then +- # Add the symbol object into the linking commands. +- compile_command="$compile_command @SYMFILE@" +- finalize_command="$finalize_command @SYMFILE@" +- preload=yes +- fi +- case $arg in +- *.la | *.lo) ;; # We handle these cases below. +- force) +- if test "$dlself" = no; then +- dlself=needless +- export_dynamic=yes +- fi +- prev= +- continue +- ;; +- self) +- if test "$prev" = dlprefiles; then +- dlself=yes +- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then +- dlself=yes +- else +- dlself=needless +- export_dynamic=yes +- fi +- prev= +- continue +- ;; +- *) +- if test "$prev" = dlfiles; then +- dlfiles="$dlfiles $arg" +- else +- dlprefiles="$dlprefiles $arg" +- fi +- prev= +- continue +- ;; +- esac +- ;; +- expsyms) +- export_symbols="$arg" +- if test ! -f "$arg"; then +- $echo "$modename: symbol file \`$arg' does not exist" +- exit 1 +- fi +- prev= +- continue +- ;; +- expsyms_regex) +- export_symbols_regex="$arg" +- prev= +- continue +- ;; +- release) +- release="-$arg" +- prev= +- continue +- ;; +- rpath | xrpath) +- # We need an absolute path. +- case $arg in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- $echo "$modename: only absolute run-paths are allowed" 1>&2 +- exit 1 +- ;; +- esac +- if test "$prev" = rpath; then +- case "$rpath " in +- *" $arg "*) ;; +- *) rpath="$rpath $arg" ;; +- esac +- else +- case "$xrpath " in +- *" $arg "*) ;; +- *) xrpath="$xrpath $arg" ;; +- esac +- fi +- prev= +- continue +- ;; +- xcompiler) +- compiler_flags="$compiler_flags $qarg" +- prev= +- compile_command="$compile_command $qarg" +- finalize_command="$finalize_command $qarg" +- continue +- ;; +- xlinker) +- linker_flags="$linker_flags $qarg" +- compiler_flags="$compiler_flags $wl$qarg" +- prev= +- compile_command="$compile_command $wl$qarg" +- finalize_command="$finalize_command $wl$qarg" +- continue +- ;; +- *) +- eval "$prev=\"\$arg\"" +- prev= +- continue +- ;; +- esac +- fi # test -n $prev ++# func_resolve_sysroot PATH ++# Replace a leading = in PATH with a sysroot. Store the result into ++# func_resolve_sysroot_result ++func_resolve_sysroot () ++{ ++ func_resolve_sysroot_result=$1 ++ case $func_resolve_sysroot_result in ++ =*) ++ func_stripname '=' '' "$func_resolve_sysroot_result" ++ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result ++ ;; ++ esac ++} + +- prevarg="$arg" ++# func_replace_sysroot PATH ++# If PATH begins with the sysroot, replace it with = and ++# store the result into func_replace_sysroot_result. ++func_replace_sysroot () ++{ ++ case "$lt_sysroot:$1" in ++ ?*:"$lt_sysroot"*) ++ func_stripname "$lt_sysroot" '' "$1" ++ func_replace_sysroot_result="=$func_stripname_result" ++ ;; ++ *) ++ # Including no sysroot. ++ func_replace_sysroot_result=$1 ++ ;; ++ esac ++} + +- case $arg in +- -all-static) +- if test -n "$link_static_flag"; then +- compile_command="$compile_command $link_static_flag" +- finalize_command="$finalize_command $link_static_flag" ++# func_infer_tag arg ++# Infer tagged configuration to use if any are available and ++# if one wasn't chosen via the "--tag" command line option. ++# Only attempt this if the compiler in the base compile ++# command doesn't match the default compiler. ++# arg is usually of the form 'gcc ...' ++func_infer_tag () ++{ ++ $opt_debug ++ if test -n "$available_tags" && test -z "$tagname"; then ++ CC_quoted= ++ for arg in $CC; do ++ func_append_quoted CC_quoted "$arg" ++ done ++ CC_expanded=`func_echo_all $CC` ++ CC_quoted_expanded=`func_echo_all $CC_quoted` ++ case $@ in ++ # Blanks in the command may have been stripped by the calling shell, ++ # but not from the CC environment variable when configure was run. ++ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ ++ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; ++ # Blanks at the start of $base_compile will cause this to fail ++ # if we don't check for them as well. ++ *) ++ for z in $available_tags; do ++ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then ++ # Evaluate the configuration. ++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" ++ CC_quoted= ++ for arg in $CC; do ++ # Double-quote args containing other shell metacharacters. ++ func_append_quoted CC_quoted "$arg" ++ done ++ CC_expanded=`func_echo_all $CC` ++ CC_quoted_expanded=`func_echo_all $CC_quoted` ++ case "$@ " in ++ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ ++ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ++ # The compiler in the base compile command matches ++ # the one in the tagged configuration. ++ # Assume this is the tagged configuration we want. ++ tagname=$z ++ break ++ ;; ++ esac ++ fi ++ done ++ # If $tagname still isn't set, then no tagged configuration ++ # was found and let the user know that the "--tag" command ++ # line option must be used. ++ if test -z "$tagname"; then ++ func_echo "unable to infer tagged configuration" ++ func_fatal_error "specify a tag with \`--tag'" ++# else ++# func_verbose "using $tagname tagged configuration" + fi +- continue + ;; ++ esac ++ fi ++} + +- -allow-undefined) +- # FIXME: remove this flag sometime in the future. +- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 +- continue +- ;; + +- -avoid-version) +- avoid_version=yes +- continue +- ;; + +- -dlopen) +- prev=dlfiles +- continue +- ;; ++# func_write_libtool_object output_name pic_name nonpic_name ++# Create a libtool object file (analogous to a ".la" file), ++# but don't create it if we're doing a dry run. ++func_write_libtool_object () ++{ ++ write_libobj=${1} ++ if test "$build_libtool_libs" = yes; then ++ write_lobj=\'${2}\' ++ else ++ write_lobj=none ++ fi + +- -dlpreopen) +- prev=dlprefiles +- continue +- ;; ++ if test "$build_old_libs" = yes; then ++ write_oldobj=\'${3}\' ++ else ++ write_oldobj=none ++ fi + +- -export-dynamic) +- export_dynamic=yes +- continue +- ;; ++ $opt_dry_run || { ++ cat >${write_libobj}T <<EOF ++# $write_libobj - a libtool object file ++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION ++# ++# Please DO NOT delete this file! ++# It is necessary for linking the library. + +- -export-symbols | -export-symbols-regex) +- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then +- $echo "$modename: more than one -exported-symbols argument is not allowed" +- exit 1 +- fi +- if test "X$arg" = "X-export-symbols"; then +- prev=expsyms +- else +- prev=expsyms_regex +- fi +- continue +- ;; ++# Name of the PIC object. ++pic_object=$write_lobj + +- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* +- # so, if we see these flags be careful not to treat them like -L +- -L[A-Z][A-Z]*:*) +- case $with_gcc/$host in +- no/*-*-irix*) +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- ;; +- esac +- continue +- ;; ++# Name of the non-PIC object ++non_pic_object=$write_oldobj + +- -L*) +- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` +- # We need an absolute path. +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- absdir=`cd "$dir" && pwd` +- if test -z "$absdir"; then +- $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 +- exit 1 +- fi +- dir="$absdir" +- ;; +- esac +- case "$deplibs " in +- *" -L$dir "*) ;; +- *) +- deplibs="$deplibs -L$dir" +- lib_search_path="$lib_search_path $dir" +- ;; +- esac +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) +- case :$dllsearchpath: in +- *":$dir:"*) ;; +- *) dllsearchpath="$dllsearchpath:$dir";; +- esac +- ;; +- esac +- continue +- ;; ++EOF ++ $MV "${write_libobj}T" "${write_libobj}" ++ } ++} + +- -l*) +- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then +- case $host in +- *-*-cygwin* | *-*-pw32* | *-*-beos*) +- # These systems don't actually have a C or math library (as such) +- continue +- ;; +- *-*-mingw* | *-*-os2*) +- # These systems don't actually have a C library (as such) +- test "X$arg" = "X-lc" && continue +- ;; +- *-*-openbsd*) +- # Do not include libc due to us having libc/libc_r. +- test "X$arg" = "X-lc" && continue +- ;; +- esac +- elif test "X$arg" = "X-lc_r"; then +- case $host in +- *-*-openbsd*) +- # Do not include libc_r directly, use -pthread flag. +- continue +- ;; +- esac +- fi +- deplibs="$deplibs $arg" +- continue +- ;; + +- -module) +- module=yes +- continue +- ;; ++################################################## ++# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS # ++################################################## ++ ++# func_convert_core_file_wine_to_w32 ARG ++# Helper function used by file name conversion functions when $build is *nix, ++# and $host is mingw, cygwin, or some other w32 environment. Relies on a ++# correctly configured wine environment available, with the winepath program ++# in $build's $PATH. ++# ++# ARG is the $build file name to be converted to w32 format. ++# Result is available in $func_convert_core_file_wine_to_w32_result, and will ++# be empty on error (or when ARG is empty) ++func_convert_core_file_wine_to_w32 () ++{ ++ $opt_debug ++ func_convert_core_file_wine_to_w32_result="$1" ++ if test -n "$1"; then ++ # Unfortunately, winepath does not exit with a non-zero error code, so we ++ # are forced to check the contents of stdout. On the other hand, if the ++ # command is not found, the shell will set an exit code of 127 and print ++ # *an error message* to stdout. So we must check for both error code of ++ # zero AND non-empty stdout, which explains the odd construction: ++ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null` ++ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then ++ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | ++ $SED -e "$lt_sed_naive_backslashify"` ++ else ++ func_convert_core_file_wine_to_w32_result= ++ fi ++ fi ++} ++# end: func_convert_core_file_wine_to_w32 + +- -no-fast-install) +- fast_install=no +- continue +- ;; + +- -no-install) +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) +- # The PATH hackery in wrapper scripts is required on Windows +- # in order for the loader to find any dlls it needs. +- $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 +- $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 +- fast_install=no +- ;; +- *) no_install=yes ;; +- esac +- continue +- ;; ++# func_convert_core_path_wine_to_w32 ARG ++# Helper function used by path conversion functions when $build is *nix, and ++# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly ++# configured wine environment available, with the winepath program in $build's ++# $PATH. Assumes ARG has no leading or trailing path separator characters. ++# ++# ARG is path to be converted from $build format to win32. ++# Result is available in $func_convert_core_path_wine_to_w32_result. ++# Unconvertible file (directory) names in ARG are skipped; if no directory names ++# are convertible, then the result may be empty. ++func_convert_core_path_wine_to_w32 () ++{ ++ $opt_debug ++ # unfortunately, winepath doesn't convert paths, only file names ++ func_convert_core_path_wine_to_w32_result="" ++ if test -n "$1"; then ++ oldIFS=$IFS ++ IFS=: ++ for func_convert_core_path_wine_to_w32_f in $1; do ++ IFS=$oldIFS ++ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" ++ if test -n "$func_convert_core_file_wine_to_w32_result" ; then ++ if test -z "$func_convert_core_path_wine_to_w32_result"; then ++ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" ++ else ++ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" ++ fi ++ fi ++ done ++ IFS=$oldIFS ++ fi ++} ++# end: func_convert_core_path_wine_to_w32 + +- -no-undefined) +- allow_undefined=no +- continue +- ;; + +- -o) prev=output ;; ++# func_cygpath ARGS... ++# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when ++# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) ++# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or ++# (2), returns the Cygwin file name or path in func_cygpath_result (input ++# file name or path is assumed to be in w32 format, as previously converted ++# from $build's *nix or MSYS format). In case (3), returns the w32 file name ++# or path in func_cygpath_result (input file name or path is assumed to be in ++# Cygwin format). Returns an empty string on error. ++# ++# ARGS are passed to cygpath, with the last one being the file name or path to ++# be converted. ++# ++# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH ++# environment variable; do not put it in $PATH. ++func_cygpath () ++{ ++ $opt_debug ++ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then ++ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` ++ if test "$?" -ne 0; then ++ # on failure, ensure result is empty ++ func_cygpath_result= ++ fi ++ else ++ func_cygpath_result= ++ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" ++ fi ++} ++#end: func_cygpath + +- -release) +- prev=release +- continue +- ;; + +- -rpath) +- prev=rpath +- continue +- ;; ++# func_convert_core_msys_to_w32 ARG ++# Convert file name or path ARG from MSYS format to w32 format. Return ++# result in func_convert_core_msys_to_w32_result. ++func_convert_core_msys_to_w32 () ++{ ++ $opt_debug ++ # awkward: cmd appends spaces to result ++ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | ++ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` ++} ++#end: func_convert_core_msys_to_w32 + +- -R) +- prev=xrpath +- continue +- ;; + +- -R*) +- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` +- # We need an absolute path. +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- $echo "$modename: only absolute run-paths are allowed" 1>&2 +- exit 1 +- ;; +- esac +- case "$xrpath " in +- *" $dir "*) ;; +- *) xrpath="$xrpath $dir" ;; +- esac +- continue +- ;; ++# func_convert_file_check ARG1 ARG2 ++# Verify that ARG1 (a file name in $build format) was converted to $host ++# format in ARG2. Otherwise, emit an error message, but continue (resetting ++# func_to_host_file_result to ARG1). ++func_convert_file_check () ++{ ++ $opt_debug ++ if test -z "$2" && test -n "$1" ; then ++ func_error "Could not determine host file name corresponding to" ++ func_error " \`$1'" ++ func_error "Continuing, but uninstalled executables may not work." ++ # Fallback: ++ func_to_host_file_result="$1" ++ fi ++} ++# end func_convert_file_check + +- -static) +- # The effects of -static are defined in a previous loop. +- # We used to do the same as -all-static on platforms that +- # didn't have a PIC flag, but the assumption that the effects +- # would be equivalent was wrong. It would break on at least +- # Digital Unix and AIX. +- continue +- ;; + +- -thread-safe) +- thread_safe=yes +- continue +- ;; ++# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH ++# Verify that FROM_PATH (a path in $build format) was converted to $host ++# format in TO_PATH. Otherwise, emit an error message, but continue, resetting ++# func_to_host_file_result to a simplistic fallback value (see below). ++func_convert_path_check () ++{ ++ $opt_debug ++ if test -z "$4" && test -n "$3"; then ++ func_error "Could not determine the host path corresponding to" ++ func_error " \`$3'" ++ func_error "Continuing, but uninstalled executables may not work." ++ # Fallback. This is a deliberately simplistic "conversion" and ++ # should not be "improved". See libtool.info. ++ if test "x$1" != "x$2"; then ++ lt_replace_pathsep_chars="s|$1|$2|g" ++ func_to_host_path_result=`echo "$3" | ++ $SED -e "$lt_replace_pathsep_chars"` ++ else ++ func_to_host_path_result="$3" ++ fi ++ fi ++} ++# end func_convert_path_check + +- -version-info) +- prev=vinfo +- continue +- ;; + +- -Wc,*) +- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` +- arg= +- save_ifs="$IFS"; IFS=',' +- for flag in $args; do +- IFS="$save_ifs" +- case $flag in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- flag="\"$flag\"" +- ;; +- esac +- arg="$arg $wl$flag" +- compiler_flags="$compiler_flags $flag" +- done +- IFS="$save_ifs" +- arg=`$echo "X$arg" | $Xsed -e "s/^ //"` +- ;; ++# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG ++# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT ++# and appending REPL if ORIG matches BACKPAT. ++func_convert_path_front_back_pathsep () ++{ ++ $opt_debug ++ case $4 in ++ $1 ) func_to_host_path_result="$3$func_to_host_path_result" ++ ;; ++ esac ++ case $4 in ++ $2 ) func_append func_to_host_path_result "$3" ++ ;; ++ esac ++} ++# end func_convert_path_front_back_pathsep + +- -Wl,*) +- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` +- arg= +- save_ifs="$IFS"; IFS=',' +- for flag in $args; do +- IFS="$save_ifs" +- case $flag in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- flag="\"$flag\"" +- ;; +- esac +- arg="$arg $wl$flag" +- compiler_flags="$compiler_flags $wl$flag" +- linker_flags="$linker_flags $flag" +- done +- IFS="$save_ifs" +- arg=`$echo "X$arg" | $Xsed -e "s/^ //"` +- ;; + +- -Xcompiler) +- prev=xcompiler +- continue ++################################################## ++# $build to $host FILE NAME CONVERSION FUNCTIONS # ++################################################## ++# invoked via `$to_host_file_cmd ARG' ++# ++# In each case, ARG is the path to be converted from $build to $host format. ++# Result will be available in $func_to_host_file_result. ++ ++ ++# func_to_host_file ARG ++# Converts the file name ARG from $build format to $host format. Return result ++# in func_to_host_file_result. ++func_to_host_file () ++{ ++ $opt_debug ++ $to_host_file_cmd "$1" ++} ++# end func_to_host_file ++ ++ ++# func_to_tool_file ARG LAZY ++# converts the file name ARG from $build format to toolchain format. Return ++# result in func_to_tool_file_result. If the conversion in use is listed ++# in (the comma separated) LAZY, no conversion takes place. ++func_to_tool_file () ++{ ++ $opt_debug ++ case ,$2, in ++ *,"$to_tool_file_cmd",*) ++ func_to_tool_file_result=$1 ++ ;; ++ *) ++ $to_tool_file_cmd "$1" ++ func_to_tool_file_result=$func_to_host_file_result ++ ;; ++ esac ++} ++# end func_to_tool_file ++ ++ ++# func_convert_file_noop ARG ++# Copy ARG to func_to_host_file_result. ++func_convert_file_noop () ++{ ++ func_to_host_file_result="$1" ++} ++# end func_convert_file_noop ++ ++ ++# func_convert_file_msys_to_w32 ARG ++# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic ++# conversion to w32 is not available inside the cwrapper. Returns result in ++# func_to_host_file_result. ++func_convert_file_msys_to_w32 () ++{ ++ $opt_debug ++ func_to_host_file_result="$1" ++ if test -n "$1"; then ++ func_convert_core_msys_to_w32 "$1" ++ func_to_host_file_result="$func_convert_core_msys_to_w32_result" ++ fi ++ func_convert_file_check "$1" "$func_to_host_file_result" ++} ++# end func_convert_file_msys_to_w32 ++ ++ ++# func_convert_file_cygwin_to_w32 ARG ++# Convert file name ARG from Cygwin to w32 format. Returns result in ++# func_to_host_file_result. ++func_convert_file_cygwin_to_w32 () ++{ ++ $opt_debug ++ func_to_host_file_result="$1" ++ if test -n "$1"; then ++ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use ++ # LT_CYGPATH in this case. ++ func_to_host_file_result=`cygpath -m "$1"` ++ fi ++ func_convert_file_check "$1" "$func_to_host_file_result" ++} ++# end func_convert_file_cygwin_to_w32 ++ ++ ++# func_convert_file_nix_to_w32 ARG ++# Convert file name ARG from *nix to w32 format. Requires a wine environment ++# and a working winepath. Returns result in func_to_host_file_result. ++func_convert_file_nix_to_w32 () ++{ ++ $opt_debug ++ func_to_host_file_result="$1" ++ if test -n "$1"; then ++ func_convert_core_file_wine_to_w32 "$1" ++ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" ++ fi ++ func_convert_file_check "$1" "$func_to_host_file_result" ++} ++# end func_convert_file_nix_to_w32 ++ ++ ++# func_convert_file_msys_to_cygwin ARG ++# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. ++# Returns result in func_to_host_file_result. ++func_convert_file_msys_to_cygwin () ++{ ++ $opt_debug ++ func_to_host_file_result="$1" ++ if test -n "$1"; then ++ func_convert_core_msys_to_w32 "$1" ++ func_cygpath -u "$func_convert_core_msys_to_w32_result" ++ func_to_host_file_result="$func_cygpath_result" ++ fi ++ func_convert_file_check "$1" "$func_to_host_file_result" ++} ++# end func_convert_file_msys_to_cygwin ++ ++ ++# func_convert_file_nix_to_cygwin ARG ++# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed ++# in a wine environment, working winepath, and LT_CYGPATH set. Returns result ++# in func_to_host_file_result. ++func_convert_file_nix_to_cygwin () ++{ ++ $opt_debug ++ func_to_host_file_result="$1" ++ if test -n "$1"; then ++ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. ++ func_convert_core_file_wine_to_w32 "$1" ++ func_cygpath -u "$func_convert_core_file_wine_to_w32_result" ++ func_to_host_file_result="$func_cygpath_result" ++ fi ++ func_convert_file_check "$1" "$func_to_host_file_result" ++} ++# end func_convert_file_nix_to_cygwin ++ ++ ++############################################# ++# $build to $host PATH CONVERSION FUNCTIONS # ++############################################# ++# invoked via `$to_host_path_cmd ARG' ++# ++# In each case, ARG is the path to be converted from $build to $host format. ++# The result will be available in $func_to_host_path_result. ++# ++# Path separators are also converted from $build format to $host format. If ++# ARG begins or ends with a path separator character, it is preserved (but ++# converted to $host format) on output. ++# ++# All path conversion functions are named using the following convention: ++# file name conversion function : func_convert_file_X_to_Y () ++# path conversion function : func_convert_path_X_to_Y () ++# where, for any given $build/$host combination the 'X_to_Y' value is the ++# same. If conversion functions are added for new $build/$host combinations, ++# the two new functions must follow this pattern, or func_init_to_host_path_cmd ++# will break. ++ ++ ++# func_init_to_host_path_cmd ++# Ensures that function "pointer" variable $to_host_path_cmd is set to the ++# appropriate value, based on the value of $to_host_file_cmd. ++to_host_path_cmd= ++func_init_to_host_path_cmd () ++{ ++ $opt_debug ++ if test -z "$to_host_path_cmd"; then ++ func_stripname 'func_convert_file_' '' "$to_host_file_cmd" ++ to_host_path_cmd="func_convert_path_${func_stripname_result}" ++ fi ++} ++ ++ ++# func_to_host_path ARG ++# Converts the path ARG from $build format to $host format. Return result ++# in func_to_host_path_result. ++func_to_host_path () ++{ ++ $opt_debug ++ func_init_to_host_path_cmd ++ $to_host_path_cmd "$1" ++} ++# end func_to_host_path ++ ++ ++# func_convert_path_noop ARG ++# Copy ARG to func_to_host_path_result. ++func_convert_path_noop () ++{ ++ func_to_host_path_result="$1" ++} ++# end func_convert_path_noop ++ ++ ++# func_convert_path_msys_to_w32 ARG ++# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic ++# conversion to w32 is not available inside the cwrapper. Returns result in ++# func_to_host_path_result. ++func_convert_path_msys_to_w32 () ++{ ++ $opt_debug ++ func_to_host_path_result="$1" ++ if test -n "$1"; then ++ # Remove leading and trailing path separator characters from ARG. MSYS ++ # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; ++ # and winepath ignores them completely. ++ func_stripname : : "$1" ++ func_to_host_path_tmp1=$func_stripname_result ++ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" ++ func_to_host_path_result="$func_convert_core_msys_to_w32_result" ++ func_convert_path_check : ";" \ ++ "$func_to_host_path_tmp1" "$func_to_host_path_result" ++ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" ++ fi ++} ++# end func_convert_path_msys_to_w32 ++ ++ ++# func_convert_path_cygwin_to_w32 ARG ++# Convert path ARG from Cygwin to w32 format. Returns result in ++# func_to_host_file_result. ++func_convert_path_cygwin_to_w32 () ++{ ++ $opt_debug ++ func_to_host_path_result="$1" ++ if test -n "$1"; then ++ # See func_convert_path_msys_to_w32: ++ func_stripname : : "$1" ++ func_to_host_path_tmp1=$func_stripname_result ++ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` ++ func_convert_path_check : ";" \ ++ "$func_to_host_path_tmp1" "$func_to_host_path_result" ++ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" ++ fi ++} ++# end func_convert_path_cygwin_to_w32 ++ ++ ++# func_convert_path_nix_to_w32 ARG ++# Convert path ARG from *nix to w32 format. Requires a wine environment and ++# a working winepath. Returns result in func_to_host_file_result. ++func_convert_path_nix_to_w32 () ++{ ++ $opt_debug ++ func_to_host_path_result="$1" ++ if test -n "$1"; then ++ # See func_convert_path_msys_to_w32: ++ func_stripname : : "$1" ++ func_to_host_path_tmp1=$func_stripname_result ++ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" ++ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" ++ func_convert_path_check : ";" \ ++ "$func_to_host_path_tmp1" "$func_to_host_path_result" ++ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" ++ fi ++} ++# end func_convert_path_nix_to_w32 ++ ++ ++# func_convert_path_msys_to_cygwin ARG ++# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. ++# Returns result in func_to_host_file_result. ++func_convert_path_msys_to_cygwin () ++{ ++ $opt_debug ++ func_to_host_path_result="$1" ++ if test -n "$1"; then ++ # See func_convert_path_msys_to_w32: ++ func_stripname : : "$1" ++ func_to_host_path_tmp1=$func_stripname_result ++ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" ++ func_cygpath -u -p "$func_convert_core_msys_to_w32_result" ++ func_to_host_path_result="$func_cygpath_result" ++ func_convert_path_check : : \ ++ "$func_to_host_path_tmp1" "$func_to_host_path_result" ++ func_convert_path_front_back_pathsep ":*" "*:" : "$1" ++ fi ++} ++# end func_convert_path_msys_to_cygwin ++ ++ ++# func_convert_path_nix_to_cygwin ARG ++# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a ++# a wine environment, working winepath, and LT_CYGPATH set. Returns result in ++# func_to_host_file_result. ++func_convert_path_nix_to_cygwin () ++{ ++ $opt_debug ++ func_to_host_path_result="$1" ++ if test -n "$1"; then ++ # Remove leading and trailing path separator characters from ++ # ARG. msys behavior is inconsistent here, cygpath turns them ++ # into '.;' and ';.', and winepath ignores them completely. ++ func_stripname : : "$1" ++ func_to_host_path_tmp1=$func_stripname_result ++ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" ++ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" ++ func_to_host_path_result="$func_cygpath_result" ++ func_convert_path_check : : \ ++ "$func_to_host_path_tmp1" "$func_to_host_path_result" ++ func_convert_path_front_back_pathsep ":*" "*:" : "$1" ++ fi ++} ++# end func_convert_path_nix_to_cygwin ++ ++ ++# func_mode_compile arg... ++func_mode_compile () ++{ ++ $opt_debug ++ # Get the compilation command and the source file. ++ base_compile= ++ srcfile="$nonopt" # always keep a non-empty value in "srcfile" ++ suppress_opt=yes ++ suppress_output= ++ arg_mode=normal ++ libobj= ++ later= ++ pie_flag= ++ ++ for arg ++ do ++ case $arg_mode in ++ arg ) ++ # do not "continue". Instead, add this to base_compile ++ lastarg="$arg" ++ arg_mode=normal + ;; + +- -Xlinker) +- prev=xlinker ++ target ) ++ libobj="$arg" ++ arg_mode=normal + continue + ;; + +- # Some other compiler flag. +- -* | +*) +- # Unknown arguments in both finalize_command and compile_command need +- # to be aesthetically quoted because they are evaled later. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` ++ normal ) ++ # Accept any command-line options. + case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" ++ -o) ++ test -n "$libobj" && \ ++ func_fatal_error "you cannot specify \`-o' more than once" ++ arg_mode=target ++ continue + ;; +- esac +- ;; + +- *.lo | *.$objext) +- # A library or standard object. +- if test "$prev" = dlfiles; then +- # This file was specified with -dlopen. +- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then +- dlfiles="$dlfiles $arg" +- prev= +- continue +- else +- # If libtool objects are unsupported, then we need to preload. +- prev=dlprefiles +- fi +- fi ++ -pie | -fpie | -fPIE) ++ func_append pie_flag " $arg" ++ continue ++ ;; + +- if test "$prev" = dlprefiles; then +- # Preload the old-style object. +- dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` +- prev= +- else +- case $arg in +- *.lo) libobjs="$libobjs $arg" ;; +- *) objs="$objs $arg" ;; +- esac +- fi ++ -shared | -static | -prefer-pic | -prefer-non-pic) ++ func_append later " $arg" ++ continue ++ ;; ++ ++ -no-suppress) ++ suppress_opt=no ++ continue ++ ;; ++ ++ -Xcompiler) ++ arg_mode=arg # the next one goes into the "base_compile" arg list ++ continue # The current "srcfile" will either be retained or ++ ;; # replaced later. I would guess that would be a bug. ++ ++ -Wc,*) ++ func_stripname '-Wc,' '' "$arg" ++ args=$func_stripname_result ++ lastarg= ++ save_ifs="$IFS"; IFS=',' ++ for arg in $args; do ++ IFS="$save_ifs" ++ func_append_quoted lastarg "$arg" ++ done ++ IFS="$save_ifs" ++ func_stripname ' ' '' "$lastarg" ++ lastarg=$func_stripname_result ++ ++ # Add the arguments to base_compile. ++ func_append base_compile " $lastarg" ++ continue ++ ;; ++ ++ *) ++ # Accept the current argument as the source file. ++ # The previous "srcfile" becomes the current argument. ++ # ++ lastarg="$srcfile" ++ srcfile="$arg" ++ ;; ++ esac # case $arg + ;; ++ esac # case $arg_mode + +- *.$libext) +- # An archive. +- deplibs="$deplibs $arg" +- old_deplibs="$old_deplibs $arg" ++ # Aesthetically quote the previous argument. ++ func_append_quoted base_compile "$lastarg" ++ done # for arg ++ ++ case $arg_mode in ++ arg) ++ func_fatal_error "you must specify an argument for -Xcompile" ++ ;; ++ target) ++ func_fatal_error "you must specify a target with \`-o'" ++ ;; ++ *) ++ # Get the name of the library object. ++ test -z "$libobj" && { ++ func_basename "$srcfile" ++ libobj="$func_basename_result" ++ } ++ ;; ++ esac ++ ++ # Recognize several different file suffixes. ++ # If the user specifies -o file.o, it is replaced with file.lo ++ case $libobj in ++ *.[cCFSifmso] | \ ++ *.ada | *.adb | *.ads | *.asm | \ ++ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ ++ *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup) ++ func_xform "$libobj" ++ libobj=$func_xform_result ++ ;; ++ esac ++ ++ case $libobj in ++ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; ++ *) ++ func_fatal_error "cannot determine name of library object from \`$libobj'" ++ ;; ++ esac ++ ++ func_infer_tag $base_compile ++ ++ for arg in $later; do ++ case $arg in ++ -shared) ++ test "$build_libtool_libs" != yes && \ ++ func_fatal_configuration "can not build a shared library" ++ build_old_libs=no + continue + ;; + +- *.la) +- # A libtool-controlled library. ++ -static) ++ build_libtool_libs=no ++ build_old_libs=yes ++ continue ++ ;; + +- if test "$prev" = dlfiles; then +- # This library was specified with -dlopen. +- dlfiles="$dlfiles $arg" +- prev= +- elif test "$prev" = dlprefiles; then +- # The library was specified with -dlpreopen. +- dlprefiles="$dlprefiles $arg" +- prev= +- else +- deplibs="$deplibs $arg" +- fi ++ -prefer-pic) ++ pic_mode=yes + continue + ;; + +- # Some other compiler argument. +- *) +- # Unknown arguments in both finalize_command and compile_command need +- # to be aesthetically quoted because they are evaled later. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac ++ -prefer-non-pic) ++ pic_mode=no ++ continue + ;; +- esac # arg ++ esac ++ done + +- # Now actually substitute the argument into the commands. +- if test -n "$arg"; then +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- fi +- done # argument parsing loop ++ func_quote_for_eval "$libobj" ++ test "X$libobj" != "X$func_quote_for_eval_result" \ ++ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ ++ && func_warning "libobj name \`$libobj' may not contain shell special characters." ++ func_dirname_and_basename "$obj" "/" "" ++ objname="$func_basename_result" ++ xdir="$func_dirname_result" ++ lobj=${xdir}$objdir/$objname + +- if test -n "$prev"; then +- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 +- $echo "$help" 1>&2 +- exit 1 +- fi ++ test -z "$base_compile" && \ ++ func_fatal_help "you must specify a compilation command" + +- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then +- eval arg=\"$export_dynamic_flag_spec\" +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" ++ # Delete any leftover library objects. ++ if test "$build_old_libs" = yes; then ++ removelist="$obj $lobj $libobj ${libobj}T" ++ else ++ removelist="$lobj $libobj ${libobj}T" + fi + +- # calculate the name of the file, without its directory +- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` +- libobjs_save="$libobjs" ++ # On Cygwin there's no "real" PIC flag so we must build both object types ++ case $host_os in ++ cygwin* | mingw* | pw32* | os2* | cegcc*) ++ pic_mode=default ++ ;; ++ esac ++ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then ++ # non-PIC code in shared libraries is not supported ++ pic_mode=default ++ fi + +- if test -n "$shlibpath_var"; then +- # get the directories listed in $shlibpath_var +- eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` ++ # Calculate the filename of the output object if compiler does ++ # not support -o with -c ++ if test "$compiler_c_o" = no; then ++ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} ++ lockfile="$output_obj.lock" + else +- shlib_search_path= ++ output_obj= ++ need_locks=no ++ lockfile= + fi +- eval sys_lib_search_path=\"$sys_lib_search_path_spec\" +- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + +- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$output_objdir" = "X$output"; then +- output_objdir="$objdir" +- else +- output_objdir="$output_objdir/$objdir" +- fi +- # Create the object directory. +- if test ! -d $output_objdir; then +- $show "$mkdir $output_objdir" +- $run $mkdir $output_objdir +- status=$? +- if test $status -ne 0 && test ! -d $output_objdir; then +- exit $status +- fi +- fi ++ # Lock this critical section if it is needed ++ # We use this script file to make the link, it avoids creating a new file ++ if test "$need_locks" = yes; then ++ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do ++ func_echo "Waiting for $lockfile to be removed" ++ sleep 2 ++ done ++ elif test "$need_locks" = warn; then ++ if test -f "$lockfile"; then ++ $ECHO "\ ++*** ERROR, $lockfile exists and contains: ++`cat $lockfile 2>/dev/null` + +- # Determine the type of output +- case $output in +- "") +- $echo "$modename: you must specify an output file" 1>&2 +- $echo "$help" 1>&2 +- exit 1 +- ;; +- *.$libext) linkmode=oldlib ;; +- *.lo | *.$objext) linkmode=obj ;; +- *.la) linkmode=lib ;; +- *) linkmode=prog ;; # Anything else should be a program. +- esac ++This indicates that another process is trying to use the same ++temporary object file, and libtool could not work around it because ++your compiler does not support \`-c' and \`-o' together. If you ++repeat this compilation, it may succeed, by chance, but you had better ++avoid parallel builds (make -j) in this platform, or get a better ++compiler." + +- specialdeplibs= +- libs= +- # Find all interdependent deplibs by searching for libraries +- # that are linked more than once (e.g. -la -lb -la) +- for deplib in $deplibs; do +- case "$libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- libs="$libs $deplib" +- done +- deplibs= +- newdependency_libs= +- newlib_search_path= +- need_relink=no # whether we're linking any uninstalled libtool libraries +- notinst_deplibs= # not-installed libtool libraries +- notinst_path= # paths that contain not-installed libtool libraries +- case $linkmode in +- lib) +- passes="conv link" +- for file in $dlfiles $dlprefiles; do +- case $file in +- *.la) ;; +- *) +- $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 +- exit 1 +- ;; +- esac +- done +- ;; +- prog) +- compile_deplibs= +- finalize_deplibs= +- alldeplibs=no +- newdlfiles= +- newdlprefiles= +- passes="conv scan dlopen dlpreopen link" +- ;; +- *) passes="conv" +- ;; +- esac +- for pass in $passes; do +- if test $linkmode = prog; then +- # Determine which files to process +- case $pass in +- dlopen) +- libs="$dlfiles" +- save_deplibs="$deplibs" # Collect dlpreopened libraries +- deplibs= +- ;; +- dlpreopen) libs="$dlprefiles" ;; +- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; +- esac ++ $opt_dry_run || $RM $removelist ++ exit $EXIT_FAILURE + fi +- for deplib in $libs; do +- lib= +- found=no +- case $deplib in +- -l*) +- if test $linkmode = oldlib && test $linkmode = obj; then +- $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 +- continue +- fi +- if test $pass = conv; then +- deplibs="$deplib $deplibs" +- continue +- fi +- name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` +- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do +- # Search the libtool library +- lib="$searchdir/lib${name}.la" +- if test -f "$lib"; then +- found=yes +- break +- fi +- done +- if test "$found" != yes; then +- # deplib doesn't seem to be a libtool library +- if test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- deplibs="$deplib $deplibs" +- test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs" +- fi +- continue +- fi +- ;; # -l +- -L*) +- case $linkmode in +- lib) +- deplibs="$deplib $deplibs" +- test $pass = conv && continue +- newdependency_libs="$deplib $newdependency_libs" +- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` +- ;; +- prog) +- if test $pass = conv; then +- deplibs="$deplib $deplibs" +- continue +- fi +- if test $pass = scan; then +- deplibs="$deplib $deplibs" +- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` +- else +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- fi +- ;; +- *) +- $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 +- ;; +- esac # linkmode +- continue +- ;; # -L +- -R*) +- if test $pass = link; then +- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` +- # Make sure the xrpath contains only unique directories. +- case "$xrpath " in +- *" $dir "*) ;; +- *) xrpath="$xrpath $dir" ;; +- esac +- fi +- deplibs="$deplib $deplibs" +- continue +- ;; +- *.la) lib="$deplib" ;; +- *.$libext) +- if test $pass = conv; then +- deplibs="$deplib $deplibs" +- continue +- fi +- case $linkmode in +- lib) +- if test "$deplibs_check_method" != pass_all; then +- echo +- echo "*** Warning: This library needs some functionality provided by $deplib." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have." +- else +- echo +- echo "*** Warning: Linking the shared library $output against the" +- echo "*** static library $deplib is not portable!" +- deplibs="$deplib $deplibs" +- fi +- continue +- ;; +- prog) +- if test $pass != link; then +- deplibs="$deplib $deplibs" +- else +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- fi +- continue +- ;; +- esac # linkmode +- ;; # *.$libext +- *.lo | *.$objext) +- if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then +- # If there is no dlopen support or we're linking statically, +- # we need to preload. +- newdlprefiles="$newdlprefiles $deplib" +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- newdlfiles="$newdlfiles $deplib" +- fi +- continue +- ;; +- %DEPLIBS%) +- alldeplibs=yes +- continue +- ;; +- esac # case $deplib +- if test $found = yes || test -f "$lib"; then : +- else +- $echo "$modename: cannot find the library \`$lib'" 1>&2 +- exit 1 +- fi ++ func_append removelist " $output_obj" ++ $ECHO "$srcfile" > "$lockfile" ++ fi + +- # Check to see that this really is a libtool archive. +- if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : +- else +- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit 1 +- fi ++ $opt_dry_run || $RM $removelist ++ func_append removelist " $lockfile" ++ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 ++ ++ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 ++ srcfile=$func_to_tool_file_result ++ func_quote_for_eval "$srcfile" ++ qsrcfile=$func_quote_for_eval_result + +- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` +- test "X$ladir" = "X$lib" && ladir="." ++ # Only build a PIC object if we are building libtool libraries. ++ if test "$build_libtool_libs" = yes; then ++ # Without this assignment, base_compile gets emptied. ++ fbsd_hideous_sh_bug=$base_compile + +- dlname= +- dlopen= +- dlpreopen= +- libdir= +- library_names= +- old_library= +- # If the library was installed with an old release of libtool, +- # it will not redefine variable installed. +- installed=yes ++ if test "$pic_mode" != no; then ++ command="$base_compile $qsrcfile $pic_flag" ++ else ++ # Don't build PIC code ++ command="$base_compile $qsrcfile" ++ fi + +- # Read the .la file +- case $lib in +- */* | *\\*) . $lib ;; +- *) . ./$lib ;; +- esac ++ func_mkdir_p "$xdir$objdir" + +- if test "$linkmode,$pass" = "lib,link" || +- test "$linkmode,$pass" = "prog,scan" || +- { test $linkmode = oldlib && test $linkmode = obj; }; then +- # Add dl[pre]opened files of deplib +- test -n "$dlopen" && dlfiles="$dlfiles $dlopen" +- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" +- fi ++ if test -z "$output_obj"; then ++ # Place PIC objects in $objdir ++ func_append command " -o $lobj" ++ fi + +- if test $pass = conv; then +- # Only check for convenience libraries +- deplibs="$lib $deplibs" +- if test -z "$libdir"; then +- if test -z "$old_library"; then +- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 +- exit 1 +- fi +- # It is a libtool convenience library, so add in its objects. +- convenience="$convenience $ladir/$objdir/$old_library" +- old_convenience="$old_convenience $ladir/$objdir/$old_library" +- tmp_libs= +- for deplib in $dependency_libs; do +- deplibs="$deplib $deplibs" +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- tmp_libs="$tmp_libs $deplib" +- done +- elif test $linkmode != prog && test $linkmode != lib; then +- $echo "$modename: \`$lib' is not a convenience library" 1>&2 +- exit 1 +- fi +- continue +- fi # $pass = conv ++ func_show_eval_locale "$command" \ ++ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' + +- # Get the name of the library we link against. +- linklib= +- for l in $old_library $library_names; do +- linklib="$l" +- done +- if test -z "$linklib"; then +- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 +- exit 1 +- fi ++ if test "$need_locks" = warn && ++ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then ++ $ECHO "\ ++*** ERROR, $lockfile contains: ++`cat $lockfile 2>/dev/null` + +- # This library was specified with -dlopen. +- if test $pass = dlopen; then +- if test -z "$libdir"; then +- $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 +- exit 1 +- fi +- if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then +- # If there is no dlname, no dlopen support or we're linking +- # statically, we need to preload. +- dlprefiles="$dlprefiles $lib" +- else +- newdlfiles="$newdlfiles $lib" +- fi +- continue +- fi # $pass = dlopen ++but it should contain: ++$srcfile + +- # We need an absolute path. +- case $ladir in +- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; +- *) +- abs_ladir=`cd "$ladir" && pwd` +- if test -z "$abs_ladir"; then +- $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 +- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 +- abs_ladir="$ladir" +- fi +- ;; +- esac +- laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` ++This indicates that another process is trying to use the same ++temporary object file, and libtool could not work around it because ++your compiler does not support \`-c' and \`-o' together. If you ++repeat this compilation, it may succeed, by chance, but you had better ++avoid parallel builds (make -j) in this platform, or get a better ++compiler." + +- # Find the relevant object directory and library name. +- if test "X$installed" = Xyes; then +- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then +- $echo "$modename: warning: library \`$lib' was moved." 1>&2 +- dir="$ladir" +- absdir="$abs_ladir" +- libdir="$abs_ladir" +- else +- dir="$libdir" +- absdir="$libdir" +- fi +- else +- dir="$ladir/$objdir" +- absdir="$abs_ladir/$objdir" +- # Remove this search path later +- notinst_path="$notinst_path $abs_ladir" +- fi # $installed = yes +- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` ++ $opt_dry_run || $RM $removelist ++ exit $EXIT_FAILURE ++ fi + +- # This library was specified with -dlpreopen. +- if test $pass = dlpreopen; then +- if test -z "$libdir"; then +- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 +- exit 1 +- fi +- # Prefer using a static library (so that no silly _DYNAMIC symbols +- # are required to link). +- if test -n "$old_library"; then +- newdlprefiles="$newdlprefiles $dir/$old_library" +- # Otherwise, use the dlname, so that lt_dlopen finds it. +- elif test -n "$dlname"; then +- newdlprefiles="$newdlprefiles $dir/$dlname" +- else +- newdlprefiles="$newdlprefiles $dir/$linklib" +- fi +- fi # $pass = dlpreopen ++ # Just move the object if needed, then go on to compile the next one ++ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then ++ func_show_eval '$MV "$output_obj" "$lobj"' \ ++ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' ++ fi + +- if test -z "$libdir"; then +- # Link the convenience library +- if test $linkmode = lib; then +- deplibs="$dir/$old_library $deplibs" +- elif test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$dir/$old_library $compile_deplibs" +- finalize_deplibs="$dir/$old_library $finalize_deplibs" +- else +- deplibs="$lib $deplibs" +- fi +- continue +- fi ++ # Allow error messages only from the first compilation. ++ if test "$suppress_opt" = yes; then ++ suppress_output=' >/dev/null 2>&1' ++ fi ++ fi + +- if test $linkmode = prog && test $pass != link; then +- newlib_search_path="$newlib_search_path $ladir" +- deplibs="$lib $deplibs" ++ # Only build a position-dependent object if we build old libraries. ++ if test "$build_old_libs" = yes; then ++ if test "$pic_mode" != yes; then ++ # Don't build PIC code ++ command="$base_compile $qsrcfile$pie_flag" ++ else ++ command="$base_compile $qsrcfile $pic_flag" ++ fi ++ if test "$compiler_c_o" = yes; then ++ func_append command " -o $obj" ++ fi + +- linkalldeplibs=no +- if test "$link_all_deplibs" != no || test -z "$library_names" || +- test "$build_libtool_libs" = no; then +- linkalldeplibs=yes +- fi ++ # Suppress compiler output if we already did a PIC compilation. ++ func_append command "$suppress_output" ++ func_show_eval_locale "$command" \ ++ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' + +- tmp_libs= +- for deplib in $dependency_libs; do +- case $deplib in +- -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test +- esac +- # Need to link against all dependency_libs? +- if test $linkalldeplibs = yes; then +- deplibs="$deplib $deplibs" +- else +- # Need to hardcode shared library paths +- # or/and link against static libraries +- newdependency_libs="$deplib $newdependency_libs" +- fi +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- tmp_libs="$tmp_libs $deplib" +- done # for deplib +- continue +- fi # $linkmode = prog... ++ if test "$need_locks" = warn && ++ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then ++ $ECHO "\ ++*** ERROR, $lockfile contains: ++`cat $lockfile 2>/dev/null` + +- link_static=no # Whether the deplib will be linked statically +- if test -n "$library_names" && +- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then +- # Link against this shared library ++but it should contain: ++$srcfile + +- if test "$linkmode,$pass" = "prog,link" || +- { test $linkmode = lib && test $hardcode_into_libs = yes; }; then +- # Hardcode the library path. +- # Skip directories that are in the system default run-time +- # search path. +- case " $sys_lib_dlsearch_path " in +- *" $absdir "*) ;; +- *) +- case "$compile_rpath " in +- *" $absdir "*) ;; +- *) compile_rpath="$compile_rpath $absdir" +- esac +- ;; +- esac +- case " $sys_lib_dlsearch_path " in +- *" $libdir "*) ;; +- *) +- case "$finalize_rpath " in +- *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" +- esac +- ;; +- esac +- if test $linkmode = prog; then +- # We need to hardcode the library path +- if test -n "$shlibpath_var"; then +- # Make sure the rpath contains only unique directories. +- case "$temp_rpath " in +- *" $dir "*) ;; +- *" $absdir "*) ;; +- *) temp_rpath="$temp_rpath $dir" ;; +- esac +- fi +- fi +- fi # $linkmode,$pass = prog,link... ++This indicates that another process is trying to use the same ++temporary object file, and libtool could not work around it because ++your compiler does not support \`-c' and \`-o' together. If you ++repeat this compilation, it may succeed, by chance, but you had better ++avoid parallel builds (make -j) in this platform, or get a better ++compiler." + +- if test "$alldeplibs" = yes && +- { test "$deplibs_check_method" = pass_all || +- { test "$build_libtool_libs" = yes && +- test -n "$library_names"; }; }; then +- # We only need to search for static libraries +- continue +- fi ++ $opt_dry_run || $RM $removelist ++ exit $EXIT_FAILURE ++ fi + +- if test "$installed" = no; then +- notinst_deplibs="$notinst_deplibs $lib" +- need_relink=yes +- fi ++ # Just move the object if needed ++ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then ++ func_show_eval '$MV "$output_obj" "$obj"' \ ++ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' ++ fi ++ fi + +- if test -n "$old_archive_from_expsyms_cmds"; then +- # figure out the soname +- set dummy $library_names +- realname="$2" +- shift; shift +- libname=`eval \\$echo \"$libname_spec\"` +- # use dlname if we got it. it's perfectly good, no? +- if test -n "$dlname"; then +- soname="$dlname" +- elif test -n "$soname_spec"; then +- # bleh windows +- case $host in +- *cygwin*) +- major=`expr $current - $age` +- versuffix="-$major" +- ;; +- esac +- eval soname=\"$soname_spec\" +- else +- soname="$realname" +- fi ++ $opt_dry_run || { ++ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + +- # Make a new name for the extract_expsyms_cmds to use +- soroot="$soname" +- soname=`echo $soroot | sed -e 's/^.*\///'` +- newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a" ++ # Unlock the critical section if it was locked ++ if test "$need_locks" != no; then ++ removelist=$lockfile ++ $RM "$lockfile" ++ fi ++ } + +- # If the library has no export list, then create one now +- if test -f "$output_objdir/$soname-def"; then : +- else +- $show "extracting exported symbol list from \`$soname'" +- save_ifs="$IFS"; IFS='~' +- eval cmds=\"$extract_expsyms_cmds\" +- for cmd in $cmds; do +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- fi ++ exit $EXIT_SUCCESS ++} + +- # Create $newlib +- if test -f "$output_objdir/$newlib"; then :; else +- $show "generating import library for \`$soname'" +- save_ifs="$IFS"; IFS='~' +- eval cmds=\"$old_archive_from_expsyms_cmds\" +- for cmd in $cmds; do +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- fi +- # make sure the library variables are pointing to the new library +- dir=$output_objdir +- linklib=$newlib +- fi # test -n $old_archive_from_expsyms_cmds ++$opt_help || { ++ test "$opt_mode" = compile && func_mode_compile ${1+"$@"} ++} + +- if test $linkmode = prog || test "$mode" != relink; then +- add_shlibpath= +- add_dir= +- add= +- lib_linked=yes +- case $hardcode_action in +- immediate | unsupported) +- if test "$hardcode_direct" = no; then +- add="$dir/$linklib" +- elif test "$hardcode_minus_L" = no; then +- case $host in +- *-*-sunos*) add_shlibpath="$dir" ;; +- esac +- add_dir="-L$dir" +- add="-l$name" +- elif test "$hardcode_shlibpath_var" = no; then +- add_shlibpath="$dir" +- add="-l$name" +- else +- lib_linked=no +- fi +- ;; +- relink) +- if test "$hardcode_direct" = yes; then +- add="$dir/$linklib" +- elif test "$hardcode_minus_L" = yes; then +- add_dir="-L$dir" +- add="-l$name" +- elif test "$hardcode_shlibpath_var" = yes; then +- add_shlibpath="$dir" +- add="-l$name" +- else +- lib_linked=no +- fi +- ;; +- *) lib_linked=no ;; +- esac ++func_mode_help () ++{ ++ # We need to display help for each of the modes. ++ case $opt_mode in ++ "") ++ # Generic help is extracted from the usage comments ++ # at the start of this file. ++ func_help ++ ;; ++ ++ clean) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +- if test "$lib_linked" != yes; then +- $echo "$modename: configuration error: unsupported hardcode properties" +- exit 1 +- fi ++Remove files from the build directory. + +- if test -n "$add_shlibpath"; then +- case :$compile_shlibpath: in +- *":$add_shlibpath:"*) ;; +- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; +- esac +- fi +- if test $linkmode = prog; then +- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" +- test -n "$add" && compile_deplibs="$add $compile_deplibs" +- else +- test -n "$add_dir" && deplibs="$add_dir $deplibs" +- test -n "$add" && deplibs="$add $deplibs" +- if test "$hardcode_direct" != yes && \ +- test "$hardcode_minus_L" != yes && \ +- test "$hardcode_shlibpath_var" = yes; then +- case :$finalize_shlibpath: in +- *":$libdir:"*) ;; +- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; +- esac +- fi +- fi +- fi ++RM is the name of the program to use to delete files associated with each FILE ++(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed ++to RM. + +- if test $linkmode = prog || test "$mode" = relink; then +- add_shlibpath= +- add_dir= +- add= +- # Finalize command for both is simple: just hardcode it. +- if test "$hardcode_direct" = yes; then +- add="$libdir/$linklib" +- elif test "$hardcode_minus_L" = yes; then +- add_dir="-L$libdir" +- add="-l$name" +- elif test "$hardcode_shlibpath_var" = yes; then +- case :$finalize_shlibpath: in +- *":$libdir:"*) ;; +- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; +- esac +- add="-l$name" +- else +- # We cannot seem to hardcode it, guess we'll fake it. +- add_dir="-L$libdir" +- add="-l$name" +- fi ++If FILE is a libtool library, object or program, all the files associated ++with it are deleted. Otherwise, only FILE itself is deleted using RM." ++ ;; + +- if test $linkmode = prog; then +- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" +- test -n "$add" && finalize_deplibs="$add $finalize_deplibs" +- else +- test -n "$add_dir" && deplibs="$add_dir $deplibs" +- test -n "$add" && deplibs="$add $deplibs" +- fi +- fi +- elif test $linkmode = prog; then +- if test "$alldeplibs" = yes && +- { test "$deplibs_check_method" = pass_all || +- { test "$build_libtool_libs" = yes && +- test -n "$library_names"; }; }; then +- # We only need to search for static libraries +- continue +- fi ++ compile) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +- # Try to link the static library +- # Here we assume that one of hardcode_direct or hardcode_minus_L +- # is not unsupported. This is valid on all known static and +- # shared platforms. +- if test "$hardcode_direct" != unsupported; then +- test -n "$old_library" && linklib="$old_library" +- compile_deplibs="$dir/$linklib $compile_deplibs" +- finalize_deplibs="$dir/$linklib $finalize_deplibs" +- else +- compile_deplibs="-l$name -L$dir $compile_deplibs" +- finalize_deplibs="-l$name -L$dir $finalize_deplibs" +- fi +- elif test "$build_libtool_libs" = yes; then +- # Not a shared library +- if test "$deplibs_check_method" != pass_all; then +- # We're trying link a shared library against a static one +- # but the system doesn't support it. ++Compile a source file into a libtool library object. + +- # Just print a warning and add the library to dependency_libs so +- # that the program can be linked against the static library. +- echo +- echo "*** Warning: This library needs some functionality provided by $lib." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have." +- if test "$module" = yes; then +- echo "*** Therefore, libtool will create a static module, that should work " +- echo "*** as long as the dlopening application is linked with the -dlopen flag." +- if test -z "$global_symbol_pipe"; then +- echo +- echo "*** However, this would only work if libtool was able to extract symbol" +- echo "*** lists from a program, using \`nm' or equivalent, but libtool could" +- echo "*** not find such a program. So, this module is probably useless." +- echo "*** \`nm' from GNU binutils and a full rebuild may help." +- fi +- if test "$build_old_libs" = no; then +- build_libtool_libs=module +- build_old_libs=yes +- else +- build_libtool_libs=no +- fi +- fi +- else +- convenience="$convenience $dir/$old_library" +- old_convenience="$old_convenience $dir/$old_library" +- deplibs="$dir/$old_library $deplibs" +- link_static=yes +- fi +- fi # link shared/static library? ++This mode accepts the following additional options: + +- if test $linkmode = lib; then +- if test -n "$dependency_libs" && +- { test $hardcode_into_libs != yes || test $build_old_libs = yes || +- test $link_static = yes; }; then +- # Extract -R from dependency_libs +- temp_deplibs= +- for libdir in $dependency_libs; do +- case $libdir in +- -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` +- case " $xrpath " in +- *" $temp_xrpath "*) ;; +- *) xrpath="$xrpath $temp_xrpath";; +- esac;; +- *) temp_deplibs="$temp_deplibs $libdir";; +- esac +- done +- dependency_libs="$temp_deplibs" +- fi ++ -o OUTPUT-FILE set the output file name to OUTPUT-FILE ++ -no-suppress do not suppress compiler output for multiple passes ++ -prefer-pic try to build PIC objects only ++ -prefer-non-pic try to build non-PIC objects only ++ -shared do not build a \`.o' file suitable for static linking ++ -static only build a \`.o' file suitable for static linking ++ -Wc,FLAG pass FLAG directly to the compiler + +- newlib_search_path="$newlib_search_path $absdir" +- # Link against this library +- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" +- # ... and its dependency_libs +- tmp_libs= +- for deplib in $dependency_libs; do +- newdependency_libs="$deplib $newdependency_libs" +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- tmp_libs="$tmp_libs $deplib" +- done ++COMPILE-COMMAND is a command to be used in creating a \`standard' object file ++from the given SOURCEFILE. + +- if test $link_all_deplibs != no; then +- # Add the search paths of all dependency libraries +- for deplib in $dependency_libs; do +- case $deplib in +- -L*) path="$deplib" ;; +- *.la) +- dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` +- test "X$dir" = "X$deplib" && dir="." +- # We need an absolute path. +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; +- *) +- absdir=`cd "$dir" && pwd` +- if test -z "$absdir"; then +- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 +- absdir="$dir" +- fi +- ;; +- esac +- if grep "^installed=no" $deplib > /dev/null; then +- path="-L$absdir/$objdir" +- else +- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` +- if test -z "$libdir"; then +- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 +- exit 1 +- fi +- if test "$absdir" != "$libdir"; then +- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 +- fi +- path="-L$absdir" +- fi +- ;; +- *) continue ;; +- esac +- case " $deplibs " in +- *" $path "*) ;; +- *) deplibs="$deplibs $path" ;; +- esac +- done +- fi # link_all_deplibs != no +- fi # linkmode = lib +- done # for deplib in $libs +- if test $pass = dlpreopen; then +- # Link the dlpreopened libraries before other libraries +- for deplib in $save_deplibs; do +- deplibs="$deplib $deplibs" +- done +- fi +- if test $pass != dlopen; then +- test $pass != scan && dependency_libs="$newdependency_libs" +- if test $pass != conv; then +- # Make sure lib_search_path contains only unique directories. +- lib_search_path= +- for dir in $newlib_search_path; do +- case "$lib_search_path " in +- *" $dir "*) ;; +- *) lib_search_path="$lib_search_path $dir" ;; +- esac +- done +- newlib_search_path= ++The output file name is determined by removing the directory component from ++SOURCEFILE, then substituting the C source code suffix \`.c' with the ++library object suffix, \`.lo'." ++ ;; ++ ++ execute) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... ++ ++Automatically set library path, then run a program. ++ ++This mode accepts the following additional options: ++ ++ -dlopen FILE add the directory containing FILE to the library path ++ ++This mode sets the library path environment variable according to \`-dlopen' ++flags. ++ ++If any of the ARGS are libtool executable wrappers, then they are translated ++into their corresponding uninstalled binary, and any of their required library ++directories are added to the library path. ++ ++Then, COMMAND is executed, with ARGS as arguments." ++ ;; ++ ++ finish) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... ++ ++Complete the installation of libtool libraries. ++ ++Each LIBDIR is a directory that contains libtool libraries. ++ ++The commands that this mode executes may require superuser privileges. Use ++the \`--dry-run' option if you just want to see what would be executed." ++ ;; ++ ++ install) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... ++ ++Install executables or libraries. ++ ++INSTALL-COMMAND is the installation command. The first component should be ++either the \`install' or \`cp' program. ++ ++The following components of INSTALL-COMMAND are treated specially: ++ ++ -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation ++ ++The rest of the components are interpreted as arguments to that command (only ++BSD-compatible install options are recognized)." ++ ;; ++ ++ link) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... ++ ++Link object files or libraries together to form another library, or to ++create an executable program. ++ ++LINK-COMMAND is a command using the C compiler that you would use to create ++a program from several object files. ++ ++The following components of LINK-COMMAND are treated specially: ++ ++ -all-static do not do any dynamic linking at all ++ -avoid-version do not add a version suffix if possible ++ -bindir BINDIR specify path to binaries directory (for systems where ++ libraries must be found in the PATH setting at runtime) ++ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime ++ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols ++ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) ++ -export-symbols SYMFILE ++ try to export only the symbols listed in SYMFILE ++ -export-symbols-regex REGEX ++ try to export only the symbols matching REGEX ++ -LLIBDIR search LIBDIR for required installed libraries ++ -lNAME OUTPUT-FILE requires the installed library libNAME ++ -module build a library that can dlopened ++ -no-fast-install disable the fast-install mode ++ -no-install link a not-installable executable ++ -no-undefined declare that a library does not refer to external symbols ++ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects ++ -objectlist FILE Use a list of object files found in FILE to specify objects ++ -precious-files-regex REGEX ++ don't remove output files matching REGEX ++ -release RELEASE specify package release information ++ -rpath LIBDIR the created library will eventually be installed in LIBDIR ++ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries ++ -shared only do dynamic linking of libtool libraries ++ -shrext SUFFIX override the standard shared library file extension ++ -static do not do any dynamic linking of uninstalled libtool libraries ++ -static-libtool-libs ++ do not do any dynamic linking of libtool libraries ++ -version-info CURRENT[:REVISION[:AGE]] ++ specify library version info [each variable defaults to 0] ++ -weak LIBNAME declare that the target provides the LIBNAME interface ++ -Wc,FLAG ++ -Xcompiler FLAG pass linker-specific FLAG directly to the compiler ++ -Wl,FLAG ++ -Xlinker FLAG pass linker-specific FLAG directly to the linker ++ -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) ++ ++All other options (arguments beginning with \`-') are ignored. ++ ++Every other argument is treated as a filename. Files ending in \`.la' are ++treated as uninstalled libtool libraries, other files are standard or library ++object files. ++ ++If the OUTPUT-FILE ends in \`.la', then a libtool library is created, ++only library objects (\`.lo' files) may be specified, and \`-rpath' is ++required, except when creating a convenience library. ++ ++If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created ++using \`ar' and \`ranlib', or on Windows using \`lib'. ++ ++If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file ++is created, otherwise an executable program is created." ++ ;; ++ ++ uninstall) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... ++ ++Remove libraries from an installation directory. ++ ++RM is the name of the program to use to delete files associated with each FILE ++(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed ++to RM. ++ ++If FILE is a libtool library, all the files associated with it are deleted. ++Otherwise, only FILE itself is deleted using RM." ++ ;; ++ ++ *) ++ func_fatal_help "invalid operation mode \`$opt_mode'" ++ ;; ++ esac ++ ++ echo ++ $ECHO "Try \`$progname --help' for more information about other modes." ++} ++ ++# Now that we've collected a possible --mode arg, show help if necessary ++if $opt_help; then ++ if test "$opt_help" = :; then ++ func_mode_help ++ else ++ { ++ func_help noexit ++ for opt_mode in compile link execute install finish uninstall clean; do ++ func_mode_help ++ done ++ } | sed -n '1p; 2,$s/^Usage:/ or: /p' ++ { ++ func_help noexit ++ for opt_mode in compile link execute install finish uninstall clean; do ++ echo ++ func_mode_help ++ done ++ } | ++ sed '1d ++ /^When reporting/,/^Report/{ ++ H ++ d ++ } ++ $x ++ /information about other modes/d ++ /more detailed .*MODE/d ++ s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' ++ fi ++ exit $? ++fi ++ ++ ++# func_mode_execute arg... ++func_mode_execute () ++{ ++ $opt_debug ++ # The first argument is the command name. ++ cmd="$nonopt" ++ test -z "$cmd" && \ ++ func_fatal_help "you must specify a COMMAND" ++ ++ # Handle -dlopen flags immediately. ++ for file in $opt_dlopen; do ++ test -f "$file" \ ++ || func_fatal_help "\`$file' is not a file" ++ ++ dir= ++ case $file in ++ *.la) ++ func_resolve_sysroot "$file" ++ file=$func_resolve_sysroot_result ++ ++ # Check to see that this really is a libtool archive. ++ func_lalib_unsafe_p "$file" \ ++ || func_fatal_help "\`$lib' is not a valid libtool archive" ++ ++ # Read the libtool library. ++ dlname= ++ library_names= ++ func_source "$file" ++ ++ # Skip this library if it cannot be dlopened. ++ if test -z "$dlname"; then ++ # Warn if it was a shared library. ++ test -n "$library_names" && \ ++ func_warning "\`$file' was not linked with \`-export-dynamic'" ++ continue + fi + +- if test "$linkmode,$pass" != "prog,link"; then +- vars="deplibs" ++ func_dirname "$file" "" "." ++ dir="$func_dirname_result" ++ ++ if test -f "$dir/$objdir/$dlname"; then ++ func_append dir "/$objdir" + else +- vars="compile_deplibs finalize_deplibs" ++ if test ! -f "$dir/$dlname"; then ++ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" ++ fi + fi +- for var in $vars dependency_libs; do +- # Add libraries to $var in reverse order +- eval tmp_libs=\"\$$var\" +- new_libs= +- for deplib in $tmp_libs; do +- case $deplib in +- -L*) new_libs="$deplib $new_libs" ;; +- *) +- case " $specialdeplibs " in +- *" $deplib "*) new_libs="$deplib $new_libs" ;; +- *) +- case " $new_libs " in +- *" $deplib "*) ;; +- *) new_libs="$deplib $new_libs" ;; +- esac +- ;; +- esac +- ;; +- esac +- done +- tmp_libs= +- for deplib in $new_libs; do +- case $deplib in +- -L*) +- case " $tmp_libs " in +- *" $deplib "*) ;; +- *) tmp_libs="$tmp_libs $deplib" ;; +- esac +- ;; +- *) tmp_libs="$tmp_libs $deplib" ;; +- esac +- done +- eval $var=\"$tmp_libs\" +- done # for var +- fi +- if test "$pass" = "conv" && +- { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then +- libs="$deplibs" # reset libs +- deplibs= +- fi +- done # for pass +- if test $linkmode = prog; then +- dlfiles="$newdlfiles" +- dlprefiles="$newdlprefiles" +- fi ++ ;; + +- case $linkmode in +- oldlib) +- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then +- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 +- fi ++ *.lo) ++ # Just add the directory containing the .lo file. ++ func_dirname "$file" "" "." ++ dir="$func_dirname_result" ++ ;; ++ ++ *) ++ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" ++ continue ++ ;; ++ esac ++ ++ # Get the absolute pathname. ++ absdir=`cd "$dir" && pwd` ++ test -n "$absdir" && dir="$absdir" ++ ++ # Now add the directory to shlibpath_var. ++ if eval "test -z \"\$$shlibpath_var\""; then ++ eval "$shlibpath_var=\"\$dir\"" ++ else ++ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" ++ fi ++ done ++ ++ # This variable tells wrapper scripts just to set shlibpath_var ++ # rather than running their programs. ++ libtool_execute_magic="$magic" ++ ++ # Check if any of the arguments is a wrapper script. ++ args= ++ for file ++ do ++ case $file in ++ -* | *.la | *.lo ) ;; ++ *) ++ # Do a test to see if this is really a libtool program. ++ if func_ltwrapper_script_p "$file"; then ++ func_source "$file" ++ # Transform arg to wrapped name. ++ file="$progdir/$program" ++ elif func_ltwrapper_executable_p "$file"; then ++ func_ltwrapper_scriptname "$file" ++ func_source "$func_ltwrapper_scriptname_result" ++ # Transform arg to wrapped name. ++ file="$progdir/$program" ++ fi ++ ;; ++ esac ++ # Quote arguments (to preserve shell metacharacters). ++ func_append_quoted args "$file" ++ done ++ ++ if test "X$opt_dry_run" = Xfalse; then ++ if test -n "$shlibpath_var"; then ++ # Export the shlibpath_var. ++ eval "export $shlibpath_var" ++ fi ++ ++ # Restore saved environment variables ++ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES ++ do ++ eval "if test \"\${save_$lt_var+set}\" = set; then ++ $lt_var=\$save_$lt_var; export $lt_var ++ else ++ $lt_unset $lt_var ++ fi" ++ done ++ ++ # Now prepare to actually exec the command. ++ exec_cmd="\$cmd$args" ++ else ++ # Display what would be done. ++ if test -n "$shlibpath_var"; then ++ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" ++ echo "export $shlibpath_var" ++ fi ++ $ECHO "$cmd$args" ++ exit $EXIT_SUCCESS ++ fi ++} ++ ++test "$opt_mode" = execute && func_mode_execute ${1+"$@"} ++ ++ ++# func_mode_finish arg... ++func_mode_finish () ++{ ++ $opt_debug ++ libs= ++ libdirs= ++ admincmds= ++ ++ for opt in "$nonopt" ${1+"$@"} ++ do ++ if test -d "$opt"; then ++ func_append libdirs " $opt" ++ ++ elif test -f "$opt"; then ++ if func_lalib_unsafe_p "$opt"; then ++ func_append libs " $opt" ++ else ++ func_warning "\`$opt' is not a valid libtool archive" ++ fi ++ ++ else ++ func_fatal_error "invalid argument \`$opt'" ++ fi ++ done ++ ++ if test -n "$libs"; then ++ if test -n "$lt_sysroot"; then ++ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` ++ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" ++ else ++ sysroot_cmd= ++ fi ++ ++ # Remove sysroot references ++ if $opt_dry_run; then ++ for lib in $libs; do ++ echo "removing references to $lt_sysroot and \`=' prefixes from $lib" ++ done ++ else ++ tmpdir=`func_mktempdir` ++ for lib in $libs; do ++ sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ ++ > $tmpdir/tmp-la ++ mv -f $tmpdir/tmp-la $lib ++ done ++ ${RM}r "$tmpdir" ++ fi ++ fi ++ ++ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then ++ for libdir in $libdirs; do ++ if test -n "$finish_cmds"; then ++ # Do each command in the finish commands. ++ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds ++'"$cmd"'"' ++ fi ++ if test -n "$finish_eval"; then ++ # Do the single finish_eval. ++ eval cmds=\"$finish_eval\" ++ $opt_dry_run || eval "$cmds" || func_append admincmds " ++ $cmds" ++ fi ++ done ++ fi ++ ++ # Exit here if they wanted silent mode. ++ $opt_silent && exit $EXIT_SUCCESS ++ ++ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then ++ echo "----------------------------------------------------------------------" ++ echo "Libraries have been installed in:" ++ for libdir in $libdirs; do ++ $ECHO " $libdir" ++ done ++ echo ++ echo "If you ever happen to want to link against installed libraries" ++ echo "in a given directory, LIBDIR, you must either use libtool, and" ++ echo "specify the full pathname of the library, or use the \`-LLIBDIR'" ++ echo "flag during linking and do at least one of the following:" ++ if test -n "$shlibpath_var"; then ++ echo " - add LIBDIR to the \`$shlibpath_var' environment variable" ++ echo " during execution" ++ fi ++ if test -n "$runpath_var"; then ++ echo " - add LIBDIR to the \`$runpath_var' environment variable" ++ echo " during linking" ++ fi ++ if test -n "$hardcode_libdir_flag_spec"; then ++ libdir=LIBDIR ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ ++ $ECHO " - use the \`$flag' linker flag" ++ fi ++ if test -n "$admincmds"; then ++ $ECHO " - have your system administrator run these commands:$admincmds" ++ fi ++ if test -f /etc/ld.so.conf; then ++ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" ++ fi ++ echo ++ ++ echo "See any operating system documentation about shared libraries for" ++ case $host in ++ solaris2.[6789]|solaris2.1[0-9]) ++ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" ++ echo "pages." ++ ;; ++ *) ++ echo "more information, such as the ld(1) and ld.so(8) manual pages." ++ ;; ++ esac ++ echo "----------------------------------------------------------------------" ++ fi ++ exit $EXIT_SUCCESS ++} ++ ++test "$opt_mode" = finish && func_mode_finish ${1+"$@"} ++ ++ ++# func_mode_install arg... ++func_mode_install () ++{ ++ $opt_debug ++ # There may be an optional sh(1) argument at the beginning of ++ # install_prog (especially on Windows NT). ++ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || ++ # Allow the use of GNU shtool's install command. ++ case $nonopt in *shtool*) :;; *) false;; esac; then ++ # Aesthetically quote it. ++ func_quote_for_eval "$nonopt" ++ install_prog="$func_quote_for_eval_result " ++ arg=$1 ++ shift ++ else ++ install_prog= ++ arg=$nonopt ++ fi ++ ++ # The real first argument should be the name of the installation program. ++ # Aesthetically quote it. ++ func_quote_for_eval "$arg" ++ func_append install_prog "$func_quote_for_eval_result" ++ install_shared_prog=$install_prog ++ case " $install_prog " in ++ *[\\\ /]cp\ *) install_cp=: ;; ++ *) install_cp=false ;; ++ esac ++ ++ # We need to accept at least all the BSD install flags. ++ dest= ++ files= ++ opts= ++ prev= ++ install_type= ++ isdir=no ++ stripme= ++ no_mode=: ++ for arg ++ do ++ arg2= ++ if test -n "$dest"; then ++ func_append files " $dest" ++ dest=$arg ++ continue ++ fi ++ ++ case $arg in ++ -d) isdir=yes ;; ++ -f) ++ if $install_cp; then :; else ++ prev=$arg ++ fi ++ ;; ++ -g | -m | -o) ++ prev=$arg ++ ;; ++ -s) ++ stripme=" -s" ++ continue ++ ;; ++ -*) ++ ;; ++ *) ++ # If the previous option needed an argument, then skip it. ++ if test -n "$prev"; then ++ if test "x$prev" = x-m && test -n "$install_override_mode"; then ++ arg2=$install_override_mode ++ no_mode=false ++ fi ++ prev= ++ else ++ dest=$arg ++ continue ++ fi ++ ;; ++ esac ++ ++ # Aesthetically quote the argument. ++ func_quote_for_eval "$arg" ++ func_append install_prog " $func_quote_for_eval_result" ++ if test -n "$arg2"; then ++ func_quote_for_eval "$arg2" ++ fi ++ func_append install_shared_prog " $func_quote_for_eval_result" ++ done ++ ++ test -z "$install_prog" && \ ++ func_fatal_help "you must specify an install program" ++ ++ test -n "$prev" && \ ++ func_fatal_help "the \`$prev' option requires an argument" ++ ++ if test -n "$install_override_mode" && $no_mode; then ++ if $install_cp; then :; else ++ func_quote_for_eval "$install_override_mode" ++ func_append install_shared_prog " -m $func_quote_for_eval_result" ++ fi ++ fi ++ ++ if test -z "$files"; then ++ if test -z "$dest"; then ++ func_fatal_help "no file or destination specified" ++ else ++ func_fatal_help "you must specify a destination" ++ fi ++ fi ++ ++ # Strip any trailing slash from the destination. ++ func_stripname '' '/' "$dest" ++ dest=$func_stripname_result ++ ++ # Check to see that the destination is a directory. ++ test -d "$dest" && isdir=yes ++ if test "$isdir" = yes; then ++ destdir="$dest" ++ destname= ++ else ++ func_dirname_and_basename "$dest" "" "." ++ destdir="$func_dirname_result" ++ destname="$func_basename_result" ++ ++ # Not a directory, so check to see that there is only one file specified. ++ set dummy $files; shift ++ test "$#" -gt 1 && \ ++ func_fatal_help "\`$dest' is not a directory" ++ fi ++ case $destdir in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ for file in $files; do ++ case $file in ++ *.lo) ;; ++ *) ++ func_fatal_help "\`$destdir' must be an absolute directory name" ++ ;; ++ esac ++ done ++ ;; ++ esac ++ ++ # This variable tells wrapper scripts just to set variables rather ++ # than running their programs. ++ libtool_install_magic="$magic" ++ ++ staticlibs= ++ future_libdirs= ++ current_libdirs= ++ for file in $files; do ++ ++ # Do each installation. ++ case $file in ++ *.$libext) ++ # Do the static libraries later. ++ func_append staticlibs " $file" ++ ;; ++ ++ *.la) ++ func_resolve_sysroot "$file" ++ file=$func_resolve_sysroot_result ++ ++ # Check to see that this really is a libtool archive. ++ func_lalib_unsafe_p "$file" \ ++ || func_fatal_help "\`$file' is not a valid libtool archive" ++ ++ library_names= ++ old_library= ++ relink_command= ++ func_source "$file" ++ ++ # Add the libdir to current_libdirs if it is the destination. ++ if test "X$destdir" = "X$libdir"; then ++ case "$current_libdirs " in ++ *" $libdir "*) ;; ++ *) func_append current_libdirs " $libdir" ;; ++ esac ++ else ++ # Note the libdir as a future libdir. ++ case "$future_libdirs " in ++ *" $libdir "*) ;; ++ *) func_append future_libdirs " $libdir" ;; ++ esac ++ fi ++ ++ func_dirname "$file" "/" "" ++ dir="$func_dirname_result" ++ func_append dir "$objdir" ++ ++ if test -n "$relink_command"; then ++ # Determine the prefix the user has applied to our future dir. ++ inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` ++ ++ # Don't allow the user to place us outside of our expected ++ # location b/c this prevents finding dependent libraries that ++ # are installed to the same prefix. ++ # At present, this check doesn't affect windows .dll's that ++ # are installed into $libdir/../bin (currently, that works fine) ++ # but it's something to keep an eye on. ++ test "$inst_prefix_dir" = "$destdir" && \ ++ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" ++ ++ if test -n "$inst_prefix_dir"; then ++ # Stick the inst_prefix_dir data into the link command. ++ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` ++ else ++ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` ++ fi ++ ++ func_warning "relinking \`$file'" ++ func_show_eval "$relink_command" \ ++ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' ++ fi ++ ++ # See the names of the shared library. ++ set dummy $library_names; shift ++ if test -n "$1"; then ++ realname="$1" ++ shift ++ ++ srcname="$realname" ++ test -n "$relink_command" && srcname="$realname"T ++ ++ # Install the shared library and build the symlinks. ++ func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ ++ 'exit $?' ++ tstripme="$stripme" ++ case $host_os in ++ cygwin* | mingw* | pw32* | cegcc*) ++ case $realname in ++ *.dll.a) ++ tstripme="" ++ ;; ++ esac ++ ;; ++ esac ++ if test -n "$tstripme" && test -n "$striplib"; then ++ func_show_eval "$striplib $destdir/$realname" 'exit $?' ++ fi ++ ++ if test "$#" -gt 0; then ++ # Delete the old symlinks, and create new ones. ++ # Try `ln -sf' first, because the `ln' binary might depend on ++ # the symlink we replace! Solaris /bin/ln does not understand -f, ++ # so we also need to try rm && ln -s. ++ for linkname ++ do ++ test "$linkname" != "$realname" \ ++ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" ++ done ++ fi ++ ++ # Do each command in the postinstall commands. ++ lib="$destdir/$realname" ++ func_execute_cmds "$postinstall_cmds" 'exit $?' ++ fi ++ ++ # Install the pseudo-library for information purposes. ++ func_basename "$file" ++ name="$func_basename_result" ++ instname="$dir/$name"i ++ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' ++ ++ # Maybe install the static library, too. ++ test -n "$old_library" && func_append staticlibs " $dir/$old_library" ++ ;; ++ ++ *.lo) ++ # Install (i.e. copy) a libtool object. ++ ++ # Figure out destination file name, if it wasn't already specified. ++ if test -n "$destname"; then ++ destfile="$destdir/$destname" ++ else ++ func_basename "$file" ++ destfile="$func_basename_result" ++ destfile="$destdir/$destfile" ++ fi ++ ++ # Deduce the name of the destination old-style object file. ++ case $destfile in ++ *.lo) ++ func_lo2o "$destfile" ++ staticdest=$func_lo2o_result ++ ;; ++ *.$objext) ++ staticdest="$destfile" ++ destfile= ++ ;; ++ *) ++ func_fatal_help "cannot copy a libtool object to \`$destfile'" ++ ;; ++ esac ++ ++ # Install the libtool object if requested. ++ test -n "$destfile" && \ ++ func_show_eval "$install_prog $file $destfile" 'exit $?' ++ ++ # Install the old object if enabled. ++ if test "$build_old_libs" = yes; then ++ # Deduce the name of the old-style object file. ++ func_lo2o "$file" ++ staticobj=$func_lo2o_result ++ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' ++ fi ++ exit $EXIT_SUCCESS ++ ;; ++ ++ *) ++ # Figure out destination file name, if it wasn't already specified. ++ if test -n "$destname"; then ++ destfile="$destdir/$destname" ++ else ++ func_basename "$file" ++ destfile="$func_basename_result" ++ destfile="$destdir/$destfile" ++ fi ++ ++ # If the file is missing, and there is a .exe on the end, strip it ++ # because it is most likely a libtool script we actually want to ++ # install ++ stripped_ext="" ++ case $file in ++ *.exe) ++ if test ! -f "$file"; then ++ func_stripname '' '.exe' "$file" ++ file=$func_stripname_result ++ stripped_ext=".exe" ++ fi ++ ;; ++ esac ++ ++ # Do a test to see if this is really a libtool program. ++ case $host in ++ *cygwin* | *mingw*) ++ if func_ltwrapper_executable_p "$file"; then ++ func_ltwrapper_scriptname "$file" ++ wrapper=$func_ltwrapper_scriptname_result ++ else ++ func_stripname '' '.exe' "$file" ++ wrapper=$func_stripname_result ++ fi ++ ;; ++ *) ++ wrapper=$file ++ ;; ++ esac ++ if func_ltwrapper_script_p "$wrapper"; then ++ notinst_deplibs= ++ relink_command= ++ ++ func_source "$wrapper" ++ ++ # Check the variables that should have been set. ++ test -z "$generated_by_libtool_version" && \ ++ func_fatal_error "invalid libtool wrapper script \`$wrapper'" ++ ++ finalize=yes ++ for lib in $notinst_deplibs; do ++ # Check to see that each library is installed. ++ libdir= ++ if test -f "$lib"; then ++ func_source "$lib" ++ fi ++ libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test ++ if test -n "$libdir" && test ! -f "$libfile"; then ++ func_warning "\`$lib' has not been installed in \`$libdir'" ++ finalize=no ++ fi ++ done ++ ++ relink_command= ++ func_source "$wrapper" ++ ++ outputname= ++ if test "$fast_install" = no && test -n "$relink_command"; then ++ $opt_dry_run || { ++ if test "$finalize" = yes; then ++ tmpdir=`func_mktempdir` ++ func_basename "$file$stripped_ext" ++ file="$func_basename_result" ++ outputname="$tmpdir/$file" ++ # Replace the output file specification. ++ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` ++ ++ $opt_silent || { ++ func_quote_for_expand "$relink_command" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ if eval "$relink_command"; then : ++ else ++ func_error "error: relink \`$file' with the above command before installing it" ++ $opt_dry_run || ${RM}r "$tmpdir" ++ continue ++ fi ++ file="$outputname" ++ else ++ func_warning "cannot relink \`$file'" ++ fi ++ } ++ else ++ # Install the binary that we compiled earlier. ++ file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` ++ fi ++ fi ++ ++ # remove .exe since cygwin /usr/bin/install will append another ++ # one anyway ++ case $install_prog,$host in ++ */usr/bin/install*,*cygwin*) ++ case $file:$destfile in ++ *.exe:*.exe) ++ # this is ok ++ ;; ++ *.exe:*) ++ destfile=$destfile.exe ++ ;; ++ *:*.exe) ++ func_stripname '' '.exe' "$destfile" ++ destfile=$func_stripname_result ++ ;; ++ esac ++ ;; ++ esac ++ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' ++ $opt_dry_run || if test -n "$outputname"; then ++ ${RM}r "$tmpdir" ++ fi ++ ;; ++ esac ++ done ++ ++ for file in $staticlibs; do ++ func_basename "$file" ++ name="$func_basename_result" ++ ++ # Set up the ranlib parameters. ++ oldlib="$destdir/$name" ++ ++ func_show_eval "$install_prog \$file \$oldlib" 'exit $?' ++ ++ if test -n "$stripme" && test -n "$old_striplib"; then ++ func_show_eval "$old_striplib $oldlib" 'exit $?' ++ fi ++ ++ # Do each command in the postinstall commands. ++ func_execute_cmds "$old_postinstall_cmds" 'exit $?' ++ done ++ ++ test -n "$future_libdirs" && \ ++ func_warning "remember to run \`$progname --finish$future_libdirs'" ++ ++ if test -n "$current_libdirs"; then ++ # Maybe just do a dry run. ++ $opt_dry_run && current_libdirs=" -n$current_libdirs" ++ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' ++ else ++ exit $EXIT_SUCCESS ++ fi ++} ++ ++test "$opt_mode" = install && func_mode_install ${1+"$@"} ++ ++ ++# func_generate_dlsyms outputname originator pic_p ++# Extract symbols from dlprefiles and create ${outputname}S.o with ++# a dlpreopen symbol table. ++func_generate_dlsyms () ++{ ++ $opt_debug ++ my_outputname="$1" ++ my_originator="$2" ++ my_pic_p="${3-no}" ++ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` ++ my_dlsyms= ++ ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ if test -n "$NM" && test -n "$global_symbol_pipe"; then ++ my_dlsyms="${my_outputname}S.c" ++ else ++ func_error "not configured to extract global symbols from dlpreopened files" ++ fi ++ fi ++ ++ if test -n "$my_dlsyms"; then ++ case $my_dlsyms in ++ "") ;; ++ *.c) ++ # Discover the nlist of each of the dlfiles. ++ nlist="$output_objdir/${my_outputname}.nm" ++ ++ func_show_eval "$RM $nlist ${nlist}S ${nlist}T" ++ ++ # Parse the name list into a source file. ++ func_verbose "creating $output_objdir/$my_dlsyms" ++ ++ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ ++/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ ++/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ ++ ++#ifdef __cplusplus ++extern \"C\" { ++#endif ++ ++#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) ++#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" ++#endif ++ ++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ ++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) ++/* DATA imports from DLLs on WIN32 con't be const, because runtime ++ relocations are performed -- see ld's documentation on pseudo-relocs. */ ++# define LT_DLSYM_CONST ++#elif defined(__osf__) ++/* This system does not cope well with relocations in const data. */ ++# define LT_DLSYM_CONST ++#else ++# define LT_DLSYM_CONST const ++#endif ++ ++/* External symbol declarations for the compiler. */\ ++" ++ ++ if test "$dlself" = yes; then ++ func_verbose "generating symbol list for \`$output'" ++ ++ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" ++ ++ # Add our own program objects to the symbol list. ++ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` ++ for progfile in $progfiles; do ++ func_to_tool_file "$progfile" func_convert_file_msys_to_w32 ++ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" ++ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" ++ done ++ ++ if test -n "$exclude_expsyms"; then ++ $opt_dry_run || { ++ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' ++ eval '$MV "$nlist"T "$nlist"' ++ } ++ fi ++ ++ if test -n "$export_symbols_regex"; then ++ $opt_dry_run || { ++ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' ++ eval '$MV "$nlist"T "$nlist"' ++ } ++ fi ++ ++ # Prepare the list of exported symbols ++ if test -z "$export_symbols"; then ++ export_symbols="$output_objdir/$outputname.exp" ++ $opt_dry_run || { ++ $RM $export_symbols ++ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' ++ case $host in ++ *cygwin* | *mingw* | *cegcc* ) ++ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ++ ;; ++ esac ++ } ++ else ++ $opt_dry_run || { ++ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' ++ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' ++ eval '$MV "$nlist"T "$nlist"' ++ case $host in ++ *cygwin* | *mingw* | *cegcc* ) ++ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ++ ;; ++ esac ++ } ++ fi ++ fi ++ ++ for dlprefile in $dlprefiles; do ++ func_verbose "extracting global C symbols from \`$dlprefile'" ++ func_basename "$dlprefile" ++ name="$func_basename_result" ++ case $host in ++ *cygwin* | *mingw* | *cegcc* ) ++ # if an import library, we need to obtain dlname ++ if func_win32_import_lib_p "$dlprefile"; then ++ func_tr_sh "$dlprefile" ++ eval "curr_lafile=\$libfile_$func_tr_sh_result" ++ dlprefile_dlbasename="" ++ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then ++ # Use subshell, to avoid clobbering current variable values ++ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` ++ if test -n "$dlprefile_dlname" ; then ++ func_basename "$dlprefile_dlname" ++ dlprefile_dlbasename="$func_basename_result" ++ else ++ # no lafile. user explicitly requested -dlpreopen <import library>. ++ $sharedlib_from_linklib_cmd "$dlprefile" ++ dlprefile_dlbasename=$sharedlib_from_linklib_result ++ fi ++ fi ++ $opt_dry_run || { ++ if test -n "$dlprefile_dlbasename" ; then ++ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' ++ else ++ func_warning "Could not compute DLL name from $name" ++ eval '$ECHO ": $name " >> "$nlist"' ++ fi ++ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 ++ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | ++ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" ++ } ++ else # not an import lib ++ $opt_dry_run || { ++ eval '$ECHO ": $name " >> "$nlist"' ++ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 ++ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" ++ } ++ fi ++ ;; ++ *) ++ $opt_dry_run || { ++ eval '$ECHO ": $name " >> "$nlist"' ++ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 ++ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" ++ } ++ ;; ++ esac ++ done ++ ++ $opt_dry_run || { ++ # Make sure we have at least an empty file. ++ test -f "$nlist" || : > "$nlist" ++ ++ if test -n "$exclude_expsyms"; then ++ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T ++ $MV "$nlist"T "$nlist" ++ fi ++ ++ # Try sorting and uniquifying the output. ++ if $GREP -v "^: " < "$nlist" | ++ if sort -k 3 </dev/null >/dev/null 2>&1; then ++ sort -k 3 ++ else ++ sort +2 ++ fi | ++ uniq > "$nlist"S; then ++ : ++ else ++ $GREP -v "^: " < "$nlist" > "$nlist"S ++ fi ++ ++ if test -f "$nlist"S; then ++ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' ++ else ++ echo '/* NONE */' >> "$output_objdir/$my_dlsyms" ++ fi ++ ++ echo >> "$output_objdir/$my_dlsyms" "\ ++ ++/* The mapping between symbol names and symbols. */ ++typedef struct { ++ const char *name; ++ void *address; ++} lt_dlsymlist; ++extern LT_DLSYM_CONST lt_dlsymlist ++lt_${my_prefix}_LTX_preloaded_symbols[]; ++LT_DLSYM_CONST lt_dlsymlist ++lt_${my_prefix}_LTX_preloaded_symbols[] = ++{\ ++ { \"$my_originator\", (void *) 0 }," ++ ++ case $need_lib_prefix in ++ no) ++ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ++ ;; ++ *) ++ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ++ ;; ++ esac ++ echo >> "$output_objdir/$my_dlsyms" "\ ++ {0, (void *) 0} ++}; ++ ++/* This works around a problem in FreeBSD linker */ ++#ifdef FREEBSD_WORKAROUND ++static const void *lt_preloaded_setup() { ++ return lt_${my_prefix}_LTX_preloaded_symbols; ++} ++#endif ++ ++#ifdef __cplusplus ++} ++#endif\ ++" ++ } # !$opt_dry_run ++ ++ pic_flag_for_symtable= ++ case "$compile_command " in ++ *" -static "*) ;; ++ *) ++ case $host in ++ # compiling the symbol table file with pic_flag works around ++ # a FreeBSD bug that causes programs to crash when -lm is ++ # linked before any other PIC object. But we must not use ++ # pic_flag when linking with -static. The problem exists in ++ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. ++ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) ++ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; ++ *-*-hpux*) ++ pic_flag_for_symtable=" $pic_flag" ;; ++ *) ++ if test "X$my_pic_p" != Xno; then ++ pic_flag_for_symtable=" $pic_flag" ++ fi ++ ;; ++ esac ++ ;; ++ esac ++ symtab_cflags= ++ for arg in $LTCFLAGS; do ++ case $arg in ++ -pie | -fpie | -fPIE) ;; ++ *) func_append symtab_cflags " $arg" ;; ++ esac ++ done ++ ++ # Now compile the dynamic symbol file. ++ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' ++ ++ # Clean up the generated files. ++ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' ++ ++ # Transform the symbol file into the correct name. ++ symfileobj="$output_objdir/${my_outputname}S.$objext" ++ case $host in ++ *cygwin* | *mingw* | *cegcc* ) ++ if test -f "$output_objdir/$my_outputname.def"; then ++ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` ++ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` ++ else ++ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` ++ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` ++ fi ++ ;; ++ *) ++ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` ++ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` ++ ;; ++ esac ++ ;; ++ *) ++ func_fatal_error "unknown suffix for \`$my_dlsyms'" ++ ;; ++ esac ++ else ++ # We keep going just in case the user didn't refer to ++ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe ++ # really was required. ++ ++ # Nullify the symbol file. ++ compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` ++ finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` ++ fi ++} ++ ++# func_win32_libid arg ++# return the library type of file 'arg' ++# ++# Need a lot of goo to handle *both* DLLs and import libs ++# Has to be a shell function in order to 'eat' the argument ++# that is supplied when $file_magic_command is called. ++# Despite the name, also deal with 64 bit binaries. ++func_win32_libid () ++{ ++ $opt_debug ++ win32_libid_type="unknown" ++ win32_fileres=`file -L $1 2>/dev/null` ++ case $win32_fileres in ++ *ar\ archive\ import\ library*) # definitely import ++ win32_libid_type="x86 archive import" ++ ;; ++ *ar\ archive*) # could be an import, or static ++ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. ++ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | ++ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then ++ func_to_tool_file "$1" func_convert_file_msys_to_w32 ++ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | ++ $SED -n -e ' ++ 1,100{ ++ / I /{ ++ s,.*,import, ++ p ++ q ++ } ++ }'` ++ case $win32_nmres in ++ import*) win32_libid_type="x86 archive import";; ++ *) win32_libid_type="x86 archive static";; ++ esac ++ fi ++ ;; ++ *DLL*) ++ win32_libid_type="x86 DLL" ++ ;; ++ *executable*) # but shell scripts are "executable" too... ++ case $win32_fileres in ++ *MS\ Windows\ PE\ Intel*) ++ win32_libid_type="x86 DLL" ++ ;; ++ esac ++ ;; ++ esac ++ $ECHO "$win32_libid_type" ++} ++ ++# func_cygming_dll_for_implib ARG ++# ++# Platform-specific function to extract the ++# name of the DLL associated with the specified ++# import library ARG. ++# Invoked by eval'ing the libtool variable ++# $sharedlib_from_linklib_cmd ++# Result is available in the variable ++# $sharedlib_from_linklib_result ++func_cygming_dll_for_implib () ++{ ++ $opt_debug ++ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` ++} ++ ++# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs ++# ++# The is the core of a fallback implementation of a ++# platform-specific function to extract the name of the ++# DLL associated with the specified import library LIBNAME. ++# ++# SECTION_NAME is either .idata$6 or .idata$7, depending ++# on the platform and compiler that created the implib. ++# ++# Echos the name of the DLL associated with the ++# specified import library. ++func_cygming_dll_for_implib_fallback_core () ++{ ++ $opt_debug ++ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` ++ $OBJDUMP -s --section "$1" "$2" 2>/dev/null | ++ $SED '/^Contents of section '"$match_literal"':/{ ++ # Place marker at beginning of archive member dllname section ++ s/.*/====MARK====/ ++ p ++ d ++ } ++ # These lines can sometimes be longer than 43 characters, but ++ # are always uninteresting ++ /:[ ]*file format pe[i]\{,1\}-/d ++ /^In archive [^:]*:/d ++ # Ensure marker is printed ++ /^====MARK====/p ++ # Remove all lines with less than 43 characters ++ /^.\{43\}/!d ++ # From remaining lines, remove first 43 characters ++ s/^.\{43\}//' | ++ $SED -n ' ++ # Join marker and all lines until next marker into a single line ++ /^====MARK====/ b para ++ H ++ $ b para ++ b ++ :para ++ x ++ s/\n//g ++ # Remove the marker ++ s/^====MARK====// ++ # Remove trailing dots and whitespace ++ s/[\. \t]*$// ++ # Print ++ /./p' | ++ # we now have a list, one entry per line, of the stringified ++ # contents of the appropriate section of all members of the ++ # archive which possess that section. Heuristic: eliminate ++ # all those which have a first or second character that is ++ # a '.' (that is, objdump's representation of an unprintable ++ # character.) This should work for all archives with less than ++ # 0x302f exports -- but will fail for DLLs whose name actually ++ # begins with a literal '.' or a single character followed by ++ # a '.'. ++ # ++ # Of those that remain, print the first one. ++ $SED -e '/^\./d;/^.\./d;q' ++} ++ ++# func_cygming_gnu_implib_p ARG ++# This predicate returns with zero status (TRUE) if ++# ARG is a GNU/binutils-style import library. Returns ++# with nonzero status (FALSE) otherwise. ++func_cygming_gnu_implib_p () ++{ ++ $opt_debug ++ func_to_tool_file "$1" func_convert_file_msys_to_w32 ++ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` ++ test -n "$func_cygming_gnu_implib_tmp" ++} ++ ++# func_cygming_ms_implib_p ARG ++# This predicate returns with zero status (TRUE) if ++# ARG is an MS-style import library. Returns ++# with nonzero status (FALSE) otherwise. ++func_cygming_ms_implib_p () ++{ ++ $opt_debug ++ func_to_tool_file "$1" func_convert_file_msys_to_w32 ++ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` ++ test -n "$func_cygming_ms_implib_tmp" ++} ++ ++# func_cygming_dll_for_implib_fallback ARG ++# Platform-specific function to extract the ++# name of the DLL associated with the specified ++# import library ARG. ++# ++# This fallback implementation is for use when $DLLTOOL ++# does not support the --identify-strict option. ++# Invoked by eval'ing the libtool variable ++# $sharedlib_from_linklib_cmd ++# Result is available in the variable ++# $sharedlib_from_linklib_result ++func_cygming_dll_for_implib_fallback () ++{ ++ $opt_debug ++ if func_cygming_gnu_implib_p "$1" ; then ++ # binutils import library ++ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` ++ elif func_cygming_ms_implib_p "$1" ; then ++ # ms-generated import library ++ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` ++ else ++ # unknown ++ sharedlib_from_linklib_result="" ++ fi ++} ++ ++ ++# func_extract_an_archive dir oldlib ++func_extract_an_archive () ++{ ++ $opt_debug ++ f_ex_an_ar_dir="$1"; shift ++ f_ex_an_ar_oldlib="$1" ++ if test "$lock_old_archive_extraction" = yes; then ++ lockfile=$f_ex_an_ar_oldlib.lock ++ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do ++ func_echo "Waiting for $lockfile to be removed" ++ sleep 2 ++ done ++ fi ++ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ ++ 'stat=$?; rm -f "$lockfile"; exit $stat' ++ if test "$lock_old_archive_extraction" = yes; then ++ $opt_dry_run || rm -f "$lockfile" ++ fi ++ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then ++ : ++ else ++ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" ++ fi ++} ++ ++ ++# func_extract_archives gentop oldlib ... ++func_extract_archives () ++{ ++ $opt_debug ++ my_gentop="$1"; shift ++ my_oldlibs=${1+"$@"} ++ my_oldobjs="" ++ my_xlib="" ++ my_xabs="" ++ my_xdir="" ++ ++ for my_xlib in $my_oldlibs; do ++ # Extract the objects. ++ case $my_xlib in ++ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; ++ *) my_xabs=`pwd`"/$my_xlib" ;; ++ esac ++ func_basename "$my_xlib" ++ my_xlib="$func_basename_result" ++ my_xlib_u=$my_xlib ++ while :; do ++ case " $extracted_archives " in ++ *" $my_xlib_u "*) ++ func_arith $extracted_serial + 1 ++ extracted_serial=$func_arith_result ++ my_xlib_u=lt$extracted_serial-$my_xlib ;; ++ *) break ;; ++ esac ++ done ++ extracted_archives="$extracted_archives $my_xlib_u" ++ my_xdir="$my_gentop/$my_xlib_u" ++ ++ func_mkdir_p "$my_xdir" ++ ++ case $host in ++ *-darwin*) ++ func_verbose "Extracting $my_xabs" ++ # Do not bother doing anything if just a dry run ++ $opt_dry_run || { ++ darwin_orig_dir=`pwd` ++ cd $my_xdir || exit $? ++ darwin_archive=$my_xabs ++ darwin_curdir=`pwd` ++ darwin_base_archive=`basename "$darwin_archive"` ++ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` ++ if test -n "$darwin_arches"; then ++ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` ++ darwin_arch= ++ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" ++ for darwin_arch in $darwin_arches ; do ++ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" ++ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" ++ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" ++ func_extract_an_archive "`pwd`" "${darwin_base_archive}" ++ cd "$darwin_curdir" ++ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" ++ done # $darwin_arches ++ ## Okay now we've a bunch of thin objects, gotta fatten them up :) ++ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` ++ darwin_file= ++ darwin_files= ++ for darwin_file in $darwin_filelist; do ++ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` ++ $LIPO -create -output "$darwin_file" $darwin_files ++ done # $darwin_filelist ++ $RM -rf unfat-$$ ++ cd "$darwin_orig_dir" ++ else ++ cd $darwin_orig_dir ++ func_extract_an_archive "$my_xdir" "$my_xabs" ++ fi # $darwin_arches ++ } # !$opt_dry_run ++ ;; ++ *) ++ func_extract_an_archive "$my_xdir" "$my_xabs" ++ ;; ++ esac ++ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` ++ done ++ ++ func_extract_archives_result="$my_oldobjs" ++} ++ ++ ++# func_emit_wrapper [arg=no] ++# ++# Emit a libtool wrapper script on stdout. ++# Don't directly open a file because we may want to ++# incorporate the script contents within a cygwin/mingw ++# wrapper executable. Must ONLY be called from within ++# func_mode_link because it depends on a number of variables ++# set therein. ++# ++# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR ++# variable will take. If 'yes', then the emitted script ++# will assume that the directory in which it is stored is ++# the $objdir directory. This is a cygwin/mingw-specific ++# behavior. ++func_emit_wrapper () ++{ ++ func_emit_wrapper_arg1=${1-no} ++ ++ $ECHO "\ ++#! $SHELL ++ ++# $output - temporary wrapper script for $objdir/$outputname ++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION ++# ++# The $output program cannot be directly executed until all the libtool ++# libraries that it depends on are installed. ++# ++# This wrapper script should never be moved out of the build directory. ++# If it is, it will not operate correctly. ++ ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++sed_quote_subst='$sed_quote_subst' ++ ++# Be Bourne compatible ++if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '\${1+\"\$@\"}'='\"\$@\"' ++ setopt NO_GLOB_SUBST ++else ++ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac ++fi ++BIN_SH=xpg4; export BIN_SH # for Tru64 ++DUALCASE=1; export DUALCASE # for MKS sh ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++relink_command=\"$relink_command\" ++ ++# This environment variable determines our operation mode. ++if test \"\$libtool_install_magic\" = \"$magic\"; then ++ # install mode needs the following variables: ++ generated_by_libtool_version='$macro_version' ++ notinst_deplibs='$notinst_deplibs' ++else ++ # When we are sourced in execute mode, \$file and \$ECHO are already set. ++ if test \"\$libtool_execute_magic\" != \"$magic\"; then ++ file=\"\$0\"" ++ ++ qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` ++ $ECHO "\ ++ ++# A function that is used when there is no print builtin or printf. ++func_fallback_echo () ++{ ++ eval 'cat <<_LTECHO_EOF ++\$1 ++_LTECHO_EOF' ++} ++ ECHO=\"$qECHO\" ++ fi ++ ++# Very basic option parsing. These options are (a) specific to ++# the libtool wrapper, (b) are identical between the wrapper ++# /script/ and the wrapper /executable/ which is used only on ++# windows platforms, and (c) all begin with the string "--lt-" ++# (application programs are unlikely to have options which match ++# this pattern). ++# ++# There are only two supported options: --lt-debug and ++# --lt-dump-script. There is, deliberately, no --lt-help. ++# ++# The first argument to this parsing function should be the ++# script's $0 value, followed by "$@". ++lt_option_debug= ++func_parse_lt_options () ++{ ++ lt_script_arg0=\$0 ++ shift ++ for lt_opt ++ do ++ case \"\$lt_opt\" in ++ --lt-debug) lt_option_debug=1 ;; ++ --lt-dump-script) ++ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` ++ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. ++ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` ++ cat \"\$lt_dump_D/\$lt_dump_F\" ++ exit 0 ++ ;; ++ --lt-*) ++ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 ++ exit 1 ++ ;; ++ esac ++ done ++ ++ # Print the debug banner immediately: ++ if test -n \"\$lt_option_debug\"; then ++ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 ++ fi ++} ++ ++# Used when --lt-debug. Prints its arguments to stdout ++# (redirection is the responsibility of the caller) ++func_lt_dump_args () ++{ ++ lt_dump_args_N=1; ++ for lt_arg ++ do ++ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" ++ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` ++ done ++} ++ ++# Core function for launching the target application ++func_exec_program_core () ++{ ++" ++ case $host in ++ # Backslashes separate directories on plain windows ++ *-*-mingw | *-*-os2* | *-cegcc*) ++ $ECHO "\ ++ if test -n \"\$lt_option_debug\"; then ++ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 ++ func_lt_dump_args \${1+\"\$@\"} 1>&2 ++ fi ++ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} ++" ++ ;; ++ ++ *) ++ $ECHO "\ ++ if test -n \"\$lt_option_debug\"; then ++ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 ++ func_lt_dump_args \${1+\"\$@\"} 1>&2 ++ fi ++ exec \"\$progdir/\$program\" \${1+\"\$@\"} ++" ++ ;; ++ esac ++ $ECHO "\ ++ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 ++ exit 1 ++} ++ ++# A function to encapsulate launching the target application ++# Strips options in the --lt-* namespace from \$@ and ++# launches target application with the remaining arguments. ++func_exec_program () ++{ ++ for lt_wr_arg ++ do ++ case \$lt_wr_arg in ++ --lt-*) ;; ++ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; ++ esac ++ shift ++ done ++ func_exec_program_core \${1+\"\$@\"} ++} ++ ++ # Parse options ++ func_parse_lt_options \"\$0\" \${1+\"\$@\"} ++ ++ # Find the directory that this script lives in. ++ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` ++ test \"x\$thisdir\" = \"x\$file\" && thisdir=. ++ ++ # Follow symbolic links until we get to the real thisdir. ++ file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` ++ while test -n \"\$file\"; do ++ destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` ++ ++ # If there was a directory component, then change thisdir. ++ if test \"x\$destdir\" != \"x\$file\"; then ++ case \"\$destdir\" in ++ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; ++ *) thisdir=\"\$thisdir/\$destdir\" ;; ++ esac ++ fi ++ ++ file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` ++ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` ++ done ++ ++ # Usually 'no', except on cygwin/mingw when embedded into ++ # the cwrapper. ++ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 ++ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then ++ # special case for '.' ++ if test \"\$thisdir\" = \".\"; then ++ thisdir=\`pwd\` ++ fi ++ # remove .libs from thisdir ++ case \"\$thisdir\" in ++ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; ++ $objdir ) thisdir=. ;; ++ esac ++ fi ++ ++ # Try to get the absolute directory name. ++ absdir=\`cd \"\$thisdir\" && pwd\` ++ test -n \"\$absdir\" && thisdir=\"\$absdir\" ++" ++ ++ if test "$fast_install" = yes; then ++ $ECHO "\ ++ program=lt-'$outputname'$exeext ++ progdir=\"\$thisdir/$objdir\" ++ ++ if test ! -f \"\$progdir/\$program\" || ++ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ ++ test \"X\$file\" != \"X\$progdir/\$program\"; }; then ++ ++ file=\"\$\$-\$program\" ++ ++ if test ! -d \"\$progdir\"; then ++ $MKDIR \"\$progdir\" ++ else ++ $RM \"\$progdir/\$file\" ++ fi" ++ ++ $ECHO "\ ++ ++ # relink executable if necessary ++ if test -n \"\$relink_command\"; then ++ if relink_command_output=\`eval \$relink_command 2>&1\`; then : ++ else ++ $ECHO \"\$relink_command_output\" >&2 ++ $RM \"\$progdir/\$file\" ++ exit 1 ++ fi ++ fi ++ ++ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || ++ { $RM \"\$progdir/\$program\"; ++ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } ++ $RM \"\$progdir/\$file\" ++ fi" ++ else ++ $ECHO "\ ++ program='$outputname' ++ progdir=\"\$thisdir/$objdir\" ++" ++ fi ++ ++ $ECHO "\ ++ ++ if test -f \"\$progdir/\$program\"; then" ++ ++ # fixup the dll searchpath if we need to. ++ # ++ # Fix the DLL searchpath if we need to. Do this before prepending ++ # to shlibpath, because on Windows, both are PATH and uninstalled ++ # libraries must come first. ++ if test -n "$dllsearchpath"; then ++ $ECHO "\ ++ # Add the dll search path components to the executable PATH ++ PATH=$dllsearchpath:\$PATH ++" ++ fi ++ ++ # Export our shlibpath_var if we have one. ++ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then ++ $ECHO "\ ++ # Add our own library path to $shlibpath_var ++ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" ++ ++ # Some systems cannot cope with colon-terminated $shlibpath_var ++ # The second colon is a workaround for a bug in BeOS R4 sed ++ $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` ++ ++ export $shlibpath_var ++" ++ fi ++ ++ $ECHO "\ ++ if test \"\$libtool_execute_magic\" != \"$magic\"; then ++ # Run the actual program with our arguments. ++ func_exec_program \${1+\"\$@\"} ++ fi ++ else ++ # The program doesn't exist. ++ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 ++ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 ++ \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 ++ exit 1 ++ fi ++fi\ ++" ++} ++ ++ ++# func_emit_cwrapperexe_src ++# emit the source code for a wrapper executable on stdout ++# Must ONLY be called from within func_mode_link because ++# it depends on a number of variable set therein. ++func_emit_cwrapperexe_src () ++{ ++ cat <<EOF ++ ++/* $cwrappersource - temporary wrapper executable for $objdir/$outputname ++ Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION ++ ++ The $output program cannot be directly executed until all the libtool ++ libraries that it depends on are installed. ++ ++ This wrapper executable should never be moved out of the build directory. ++ If it is, it will not operate correctly. ++*/ ++EOF ++ cat <<"EOF" ++#ifdef _MSC_VER ++# define _CRT_SECURE_NO_DEPRECATE 1 ++#endif ++#include <stdio.h> ++#include <stdlib.h> ++#ifdef _MSC_VER ++# include <direct.h> ++# include <process.h> ++# include <io.h> ++#else ++# include <unistd.h> ++# include <stdint.h> ++# ifdef __CYGWIN__ ++# include <io.h> ++# endif ++#endif ++#include <malloc.h> ++#include <stdarg.h> ++#include <assert.h> ++#include <string.h> ++#include <ctype.h> ++#include <errno.h> ++#include <fcntl.h> ++#include <sys/stat.h> ++ ++/* declarations of non-ANSI functions */ ++#if defined(__MINGW32__) ++# ifdef __STRICT_ANSI__ ++int _putenv (const char *); ++# endif ++#elif defined(__CYGWIN__) ++# ifdef __STRICT_ANSI__ ++char *realpath (const char *, char *); ++int putenv (char *); ++int setenv (const char *, const char *, int); ++# endif ++/* #elif defined (other platforms) ... */ ++#endif ++ ++/* portability defines, excluding path handling macros */ ++#if defined(_MSC_VER) ++# define setmode _setmode ++# define stat _stat ++# define chmod _chmod ++# define getcwd _getcwd ++# define putenv _putenv ++# define S_IXUSR _S_IEXEC ++# ifndef _INTPTR_T_DEFINED ++# define _INTPTR_T_DEFINED ++# define intptr_t int ++# endif ++#elif defined(__MINGW32__) ++# define setmode _setmode ++# define stat _stat ++# define chmod _chmod ++# define getcwd _getcwd ++# define putenv _putenv ++#elif defined(__CYGWIN__) ++# define HAVE_SETENV ++# define FOPEN_WB "wb" ++/* #elif defined (other platforms) ... */ ++#endif ++ ++#if defined(PATH_MAX) ++# define LT_PATHMAX PATH_MAX ++#elif defined(MAXPATHLEN) ++# define LT_PATHMAX MAXPATHLEN ++#else ++# define LT_PATHMAX 1024 ++#endif ++ ++#ifndef S_IXOTH ++# define S_IXOTH 0 ++#endif ++#ifndef S_IXGRP ++# define S_IXGRP 0 ++#endif ++ ++/* path handling portability macros */ ++#ifndef DIR_SEPARATOR ++# define DIR_SEPARATOR '/' ++# define PATH_SEPARATOR ':' ++#endif ++ ++#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ ++ defined (__OS2__) ++# define HAVE_DOS_BASED_FILE_SYSTEM ++# define FOPEN_WB "wb" ++# ifndef DIR_SEPARATOR_2 ++# define DIR_SEPARATOR_2 '\\' ++# endif ++# ifndef PATH_SEPARATOR_2 ++# define PATH_SEPARATOR_2 ';' ++# endif ++#endif ++ ++#ifndef DIR_SEPARATOR_2 ++# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) ++#else /* DIR_SEPARATOR_2 */ ++# define IS_DIR_SEPARATOR(ch) \ ++ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) ++#endif /* DIR_SEPARATOR_2 */ ++ ++#ifndef PATH_SEPARATOR_2 ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) ++#else /* PATH_SEPARATOR_2 */ ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) ++#endif /* PATH_SEPARATOR_2 */ ++ ++#ifndef FOPEN_WB ++# define FOPEN_WB "w" ++#endif ++#ifndef _O_BINARY ++# define _O_BINARY 0 ++#endif ++ ++#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) ++#define XFREE(stale) do { \ ++ if (stale) { free ((void *) stale); stale = 0; } \ ++} while (0) ++ ++#if defined(LT_DEBUGWRAPPER) ++static int lt_debug = 1; ++#else ++static int lt_debug = 0; ++#endif ++ ++const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ ++ ++void *xmalloc (size_t num); ++char *xstrdup (const char *string); ++const char *base_name (const char *name); ++char *find_executable (const char *wrapper); ++char *chase_symlinks (const char *pathspec); ++int make_executable (const char *path); ++int check_executable (const char *path); ++char *strendzap (char *str, const char *pat); ++void lt_debugprintf (const char *file, int line, const char *fmt, ...); ++void lt_fatal (const char *file, int line, const char *message, ...); ++static const char *nonnull (const char *s); ++static const char *nonempty (const char *s); ++void lt_setenv (const char *name, const char *value); ++char *lt_extend_str (const char *orig_value, const char *add, int to_end); ++void lt_update_exe_path (const char *name, const char *value); ++void lt_update_lib_path (const char *name, const char *value); ++char **prepare_spawn (char **argv); ++void lt_dump_script (FILE *f); ++EOF ++ ++ cat <<EOF ++volatile const char * MAGIC_EXE = "$magic_exe"; ++const char * LIB_PATH_VARNAME = "$shlibpath_var"; ++EOF ++ ++ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then ++ func_to_host_path "$temp_rpath" ++ cat <<EOF ++const char * LIB_PATH_VALUE = "$func_to_host_path_result"; ++EOF ++ else ++ cat <<"EOF" ++const char * LIB_PATH_VALUE = ""; ++EOF ++ fi ++ ++ if test -n "$dllsearchpath"; then ++ func_to_host_path "$dllsearchpath:" ++ cat <<EOF ++const char * EXE_PATH_VARNAME = "PATH"; ++const char * EXE_PATH_VALUE = "$func_to_host_path_result"; ++EOF ++ else ++ cat <<"EOF" ++const char * EXE_PATH_VARNAME = ""; ++const char * EXE_PATH_VALUE = ""; ++EOF ++ fi ++ ++ if test "$fast_install" = yes; then ++ cat <<EOF ++const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */ ++EOF ++ else ++ cat <<EOF ++const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */ ++EOF ++ fi ++ ++ ++ cat <<"EOF" ++ ++#define LTWRAPPER_OPTION_PREFIX "--lt-" ++ ++static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX; ++static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script"; ++static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug"; ++ ++int ++main (int argc, char *argv[]) ++{ ++ char **newargz; ++ int newargc; ++ char *tmp_pathspec; ++ char *actual_cwrapper_path; ++ char *actual_cwrapper_name; ++ char *target_name; ++ char *lt_argv_zero; ++ intptr_t rval = 127; ++ ++ int i; ++ ++ program_name = (char *) xstrdup (base_name (argv[0])); ++ newargz = XMALLOC (char *, argc + 1); ++ ++ /* very simple arg parsing; don't want to rely on getopt ++ * also, copy all non cwrapper options to newargz, except ++ * argz[0], which is handled differently ++ */ ++ newargc=0; ++ for (i = 1; i < argc; i++) ++ { ++ if (strcmp (argv[i], dumpscript_opt) == 0) ++ { ++EOF ++ case "$host" in ++ *mingw* | *cygwin* ) ++ # make stdout use "unix" line endings ++ echo " setmode(1,_O_BINARY);" ++ ;; ++ esac ++ ++ cat <<"EOF" ++ lt_dump_script (stdout); ++ return 0; ++ } ++ if (strcmp (argv[i], debug_opt) == 0) ++ { ++ lt_debug = 1; ++ continue; ++ } ++ if (strcmp (argv[i], ltwrapper_option_prefix) == 0) ++ { ++ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX ++ namespace, but it is not one of the ones we know about and ++ have already dealt with, above (inluding dump-script), then ++ report an error. Otherwise, targets might begin to believe ++ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX ++ namespace. The first time any user complains about this, we'll ++ need to make LTWRAPPER_OPTION_PREFIX a configure-time option ++ or a configure.ac-settable value. ++ */ ++ lt_fatal (__FILE__, __LINE__, ++ "unrecognized %s option: '%s'", ++ ltwrapper_option_prefix, argv[i]); ++ } ++ /* otherwise ... */ ++ newargz[++newargc] = xstrdup (argv[i]); ++ } ++ newargz[++newargc] = NULL; ++ ++EOF ++ cat <<EOF ++ /* The GNU banner must be the first non-error debug message */ ++ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n"); ++EOF ++ cat <<"EOF" ++ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]); ++ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name); ++ ++ tmp_pathspec = find_executable (argv[0]); ++ if (tmp_pathspec == NULL) ++ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]); ++ lt_debugprintf (__FILE__, __LINE__, ++ "(main) found exe (before symlink chase) at: %s\n", ++ tmp_pathspec); ++ ++ actual_cwrapper_path = chase_symlinks (tmp_pathspec); ++ lt_debugprintf (__FILE__, __LINE__, ++ "(main) found exe (after symlink chase) at: %s\n", ++ actual_cwrapper_path); ++ XFREE (tmp_pathspec); ++ ++ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path)); ++ strendzap (actual_cwrapper_path, actual_cwrapper_name); ++ ++ /* wrapper name transforms */ ++ strendzap (actual_cwrapper_name, ".exe"); ++ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1); ++ XFREE (actual_cwrapper_name); ++ actual_cwrapper_name = tmp_pathspec; ++ tmp_pathspec = 0; ++ ++ /* target_name transforms -- use actual target program name; might have lt- prefix */ ++ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME)); ++ strendzap (target_name, ".exe"); ++ tmp_pathspec = lt_extend_str (target_name, ".exe", 1); ++ XFREE (target_name); ++ target_name = tmp_pathspec; ++ tmp_pathspec = 0; ++ ++ lt_debugprintf (__FILE__, __LINE__, ++ "(main) libtool target name: %s\n", ++ target_name); ++EOF ++ ++ cat <<EOF ++ newargz[0] = ++ XMALLOC (char, (strlen (actual_cwrapper_path) + ++ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1)); ++ strcpy (newargz[0], actual_cwrapper_path); ++ strcat (newargz[0], "$objdir"); ++ strcat (newargz[0], "/"); ++EOF ++ ++ cat <<"EOF" ++ /* stop here, and copy so we don't have to do this twice */ ++ tmp_pathspec = xstrdup (newargz[0]); ++ ++ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */ ++ strcat (newargz[0], actual_cwrapper_name); ++ ++ /* DO want the lt- prefix here if it exists, so use target_name */ ++ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1); ++ XFREE (tmp_pathspec); ++ tmp_pathspec = NULL; ++EOF ++ ++ case $host_os in ++ mingw*) ++ cat <<"EOF" ++ { ++ char* p; ++ while ((p = strchr (newargz[0], '\\')) != NULL) ++ { ++ *p = '/'; ++ } ++ while ((p = strchr (lt_argv_zero, '\\')) != NULL) ++ { ++ *p = '/'; ++ } ++ } ++EOF ++ ;; ++ esac ++ ++ cat <<"EOF" ++ XFREE (target_name); ++ XFREE (actual_cwrapper_path); ++ XFREE (actual_cwrapper_name); ++ ++ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */ ++ lt_setenv ("DUALCASE", "1"); /* for MSK sh */ ++ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must ++ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath) ++ because on Windows, both *_VARNAMEs are PATH but uninstalled ++ libraries must come first. */ ++ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE); ++ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE); ++ ++ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n", ++ nonnull (lt_argv_zero)); ++ for (i = 0; i < newargc; i++) ++ { ++ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n", ++ i, nonnull (newargz[i])); ++ } ++ ++EOF ++ ++ case $host_os in ++ mingw*) ++ cat <<"EOF" ++ /* execv doesn't actually work on mingw as expected on unix */ ++ newargz = prepare_spawn (newargz); ++ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); ++ if (rval == -1) ++ { ++ /* failed to start process */ ++ lt_debugprintf (__FILE__, __LINE__, ++ "(main) failed to launch target \"%s\": %s\n", ++ lt_argv_zero, nonnull (strerror (errno))); ++ return 127; ++ } ++ return rval; ++EOF ++ ;; ++ *) ++ cat <<"EOF" ++ execv (lt_argv_zero, newargz); ++ return rval; /* =127, but avoids unused variable warning */ ++EOF ++ ;; ++ esac ++ ++ cat <<"EOF" ++} ++ ++void * ++xmalloc (size_t num) ++{ ++ void *p = (void *) malloc (num); ++ if (!p) ++ lt_fatal (__FILE__, __LINE__, "memory exhausted"); ++ ++ return p; ++} ++ ++char * ++xstrdup (const char *string) ++{ ++ return string ? strcpy ((char *) xmalloc (strlen (string) + 1), ++ string) : NULL; ++} ++ ++const char * ++base_name (const char *name) ++{ ++ const char *base; ++ ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ /* Skip over the disk name in MSDOS pathnames. */ ++ if (isalpha ((unsigned char) name[0]) && name[1] == ':') ++ name += 2; ++#endif ++ ++ for (base = name; *name; name++) ++ if (IS_DIR_SEPARATOR (*name)) ++ base = name + 1; ++ return base; ++} ++ ++int ++check_executable (const char *path) ++{ ++ struct stat st; ++ ++ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n", ++ nonempty (path)); ++ if ((!path) || (!*path)) ++ return 0; ++ ++ if ((stat (path, &st) >= 0) ++ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) ++ return 1; ++ else ++ return 0; ++} ++ ++int ++make_executable (const char *path) ++{ ++ int rval = 0; ++ struct stat st; ++ ++ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", ++ nonempty (path)); ++ if ((!path) || (!*path)) ++ return 0; ++ ++ if (stat (path, &st) >= 0) ++ { ++ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); ++ } ++ return rval; ++} ++ ++/* Searches for the full path of the wrapper. Returns ++ newly allocated full path name if found, NULL otherwise ++ Does not chase symlinks, even on platforms that support them. ++*/ ++char * ++find_executable (const char *wrapper) ++{ ++ int has_slash = 0; ++ const char *p; ++ const char *p_next; ++ /* static buffer for getcwd */ ++ char tmp[LT_PATHMAX + 1]; ++ int tmp_len; ++ char *concat_name; ++ ++ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", ++ nonempty (wrapper)); ++ ++ if ((wrapper == NULL) || (*wrapper == '\0')) ++ return NULL; ++ ++ /* Absolute path? */ ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable (concat_name)) ++ return concat_name; ++ XFREE (concat_name); ++ } ++ else ++ { ++#endif ++ if (IS_DIR_SEPARATOR (wrapper[0])) ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable (concat_name)) ++ return concat_name; ++ XFREE (concat_name); ++ } ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ } ++#endif ++ ++ for (p = wrapper; *p; p++) ++ if (*p == '/') ++ { ++ has_slash = 1; ++ break; ++ } ++ if (!has_slash) ++ { ++ /* no slashes; search PATH */ ++ const char *path = getenv ("PATH"); ++ if (path != NULL) ++ { ++ for (p = path; *p; p = p_next) ++ { ++ const char *q; ++ size_t p_len; ++ for (q = p; *q; q++) ++ if (IS_PATH_SEPARATOR (*q)) ++ break; ++ p_len = q - p; ++ p_next = (*q == '\0' ? q : q + 1); ++ if (p_len == 0) ++ { ++ /* empty path: current directory */ ++ if (getcwd (tmp, LT_PATHMAX) == NULL) ++ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", ++ nonnull (strerror (errno))); ++ tmp_len = strlen (tmp); ++ concat_name = ++ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); ++ } ++ else ++ { ++ concat_name = ++ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); ++ memcpy (concat_name, p, p_len); ++ concat_name[p_len] = '/'; ++ strcpy (concat_name + p_len + 1, wrapper); ++ } ++ if (check_executable (concat_name)) ++ return concat_name; ++ XFREE (concat_name); ++ } ++ } ++ /* not found in PATH; assume curdir */ ++ } ++ /* Relative path | not found in path: prepend cwd */ ++ if (getcwd (tmp, LT_PATHMAX) == NULL) ++ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", ++ nonnull (strerror (errno))); ++ tmp_len = strlen (tmp); ++ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); ++ ++ if (check_executable (concat_name)) ++ return concat_name; ++ XFREE (concat_name); ++ return NULL; ++} ++ ++char * ++chase_symlinks (const char *pathspec) ++{ ++#ifndef S_ISLNK ++ return xstrdup (pathspec); ++#else ++ char buf[LT_PATHMAX]; ++ struct stat s; ++ char *tmp_pathspec = xstrdup (pathspec); ++ char *p; ++ int has_symlinks = 0; ++ while (strlen (tmp_pathspec) && !has_symlinks) ++ { ++ lt_debugprintf (__FILE__, __LINE__, ++ "checking path component for symlinks: %s\n", ++ tmp_pathspec); ++ if (lstat (tmp_pathspec, &s) == 0) ++ { ++ if (S_ISLNK (s.st_mode) != 0) ++ { ++ has_symlinks = 1; ++ break; ++ } ++ ++ /* search backwards for last DIR_SEPARATOR */ ++ p = tmp_pathspec + strlen (tmp_pathspec) - 1; ++ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) ++ p--; ++ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) ++ { ++ /* no more DIR_SEPARATORS left */ ++ break; ++ } ++ *p = '\0'; ++ } ++ else ++ { ++ lt_fatal (__FILE__, __LINE__, ++ "error accessing file \"%s\": %s", ++ tmp_pathspec, nonnull (strerror (errno))); ++ } ++ } ++ XFREE (tmp_pathspec); ++ ++ if (!has_symlinks) ++ { ++ return xstrdup (pathspec); ++ } ++ ++ tmp_pathspec = realpath (pathspec, buf); ++ if (tmp_pathspec == 0) ++ { ++ lt_fatal (__FILE__, __LINE__, ++ "could not follow symlinks for %s", pathspec); ++ } ++ return xstrdup (tmp_pathspec); ++#endif ++} ++ ++char * ++strendzap (char *str, const char *pat) ++{ ++ size_t len, patlen; ++ ++ assert (str != NULL); ++ assert (pat != NULL); ++ ++ len = strlen (str); ++ patlen = strlen (pat); ++ ++ if (patlen <= len) ++ { ++ str += len - patlen; ++ if (strcmp (str, pat) == 0) ++ *str = '\0'; ++ } ++ return str; ++} ++ ++void ++lt_debugprintf (const char *file, int line, const char *fmt, ...) ++{ ++ va_list args; ++ if (lt_debug) ++ { ++ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); ++ va_start (args, fmt); ++ (void) vfprintf (stderr, fmt, args); ++ va_end (args); ++ } ++} ++ ++static void ++lt_error_core (int exit_status, const char *file, ++ int line, const char *mode, ++ const char *message, va_list ap) ++{ ++ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); ++ vfprintf (stderr, message, ap); ++ fprintf (stderr, ".\n"); ++ ++ if (exit_status >= 0) ++ exit (exit_status); ++} ++ ++void ++lt_fatal (const char *file, int line, const char *message, ...) ++{ ++ va_list ap; ++ va_start (ap, message); ++ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); ++ va_end (ap); ++} ++ ++static const char * ++nonnull (const char *s) ++{ ++ return s ? s : "(null)"; ++} ++ ++static const char * ++nonempty (const char *s) ++{ ++ return (s && !*s) ? "(empty)" : nonnull (s); ++} ++ ++void ++lt_setenv (const char *name, const char *value) ++{ ++ lt_debugprintf (__FILE__, __LINE__, ++ "(lt_setenv) setting '%s' to '%s'\n", ++ nonnull (name), nonnull (value)); ++ { ++#ifdef HAVE_SETENV ++ /* always make a copy, for consistency with !HAVE_SETENV */ ++ char *str = xstrdup (value); ++ setenv (name, str, 1); ++#else ++ int len = strlen (name) + 1 + strlen (value) + 1; ++ char *str = XMALLOC (char, len); ++ sprintf (str, "%s=%s", name, value); ++ if (putenv (str) != EXIT_SUCCESS) ++ { ++ XFREE (str); ++ } ++#endif ++ } ++} ++ ++char * ++lt_extend_str (const char *orig_value, const char *add, int to_end) ++{ ++ char *new_value; ++ if (orig_value && *orig_value) ++ { ++ int orig_value_len = strlen (orig_value); ++ int add_len = strlen (add); ++ new_value = XMALLOC (char, add_len + orig_value_len + 1); ++ if (to_end) ++ { ++ strcpy (new_value, orig_value); ++ strcpy (new_value + orig_value_len, add); ++ } ++ else ++ { ++ strcpy (new_value, add); ++ strcpy (new_value + add_len, orig_value); ++ } ++ } ++ else ++ { ++ new_value = xstrdup (add); ++ } ++ return new_value; ++} ++ ++void ++lt_update_exe_path (const char *name, const char *value) ++{ ++ lt_debugprintf (__FILE__, __LINE__, ++ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", ++ nonnull (name), nonnull (value)); ++ ++ if (name && *name && value && *value) ++ { ++ char *new_value = lt_extend_str (getenv (name), value, 0); ++ /* some systems can't cope with a ':'-terminated path #' */ ++ int len = strlen (new_value); ++ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) ++ { ++ new_value[len-1] = '\0'; ++ } ++ lt_setenv (name, new_value); ++ XFREE (new_value); ++ } ++} ++ ++void ++lt_update_lib_path (const char *name, const char *value) ++{ ++ lt_debugprintf (__FILE__, __LINE__, ++ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", ++ nonnull (name), nonnull (value)); ++ ++ if (name && *name && value && *value) ++ { ++ char *new_value = lt_extend_str (getenv (name), value, 0); ++ lt_setenv (name, new_value); ++ XFREE (new_value); ++ } ++} ++ ++EOF ++ case $host_os in ++ mingw*) ++ cat <<"EOF" ++ ++/* Prepares an argument vector before calling spawn(). ++ Note that spawn() does not by itself call the command interpreter ++ (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : ++ ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); ++ GetVersionEx(&v); ++ v.dwPlatformId == VER_PLATFORM_WIN32_NT; ++ }) ? "cmd.exe" : "command.com"). ++ Instead it simply concatenates the arguments, separated by ' ', and calls ++ CreateProcess(). We must quote the arguments since Win32 CreateProcess() ++ interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a ++ special way: ++ - Space and tab are interpreted as delimiters. They are not treated as ++ delimiters if they are surrounded by double quotes: "...". ++ - Unescaped double quotes are removed from the input. Their only effect is ++ that within double quotes, space and tab are treated like normal ++ characters. ++ - Backslashes not followed by double quotes are not special. ++ - But 2*n+1 backslashes followed by a double quote become ++ n backslashes followed by a double quote (n >= 0): ++ \" -> " ++ \\\" -> \" ++ \\\\\" -> \\" ++ */ ++#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" ++#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" ++char ** ++prepare_spawn (char **argv) ++{ ++ size_t argc; ++ char **new_argv; ++ size_t i; ++ ++ /* Count number of arguments. */ ++ for (argc = 0; argv[argc] != NULL; argc++) ++ ; ++ ++ /* Allocate new argument vector. */ ++ new_argv = XMALLOC (char *, argc + 1); ++ ++ /* Put quoted arguments into the new argument vector. */ ++ for (i = 0; i < argc; i++) ++ { ++ const char *string = argv[i]; ++ ++ if (string[0] == '\0') ++ new_argv[i] = xstrdup ("\"\""); ++ else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) ++ { ++ int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); ++ size_t length; ++ unsigned int backslashes; ++ const char *s; ++ char *quoted_string; ++ char *p; ++ ++ length = 0; ++ backslashes = 0; ++ if (quote_around) ++ length++; ++ for (s = string; *s != '\0'; s++) ++ { ++ char c = *s; ++ if (c == '"') ++ length += backslashes + 1; ++ length++; ++ if (c == '\\') ++ backslashes++; ++ else ++ backslashes = 0; ++ } ++ if (quote_around) ++ length += backslashes + 1; ++ ++ quoted_string = XMALLOC (char, length + 1); ++ ++ p = quoted_string; ++ backslashes = 0; ++ if (quote_around) ++ *p++ = '"'; ++ for (s = string; *s != '\0'; s++) ++ { ++ char c = *s; ++ if (c == '"') ++ { ++ unsigned int j; ++ for (j = backslashes + 1; j > 0; j--) ++ *p++ = '\\'; ++ } ++ *p++ = c; ++ if (c == '\\') ++ backslashes++; ++ else ++ backslashes = 0; ++ } ++ if (quote_around) ++ { ++ unsigned int j; ++ for (j = backslashes; j > 0; j--) ++ *p++ = '\\'; ++ *p++ = '"'; ++ } ++ *p = '\0'; ++ ++ new_argv[i] = quoted_string; ++ } ++ else ++ new_argv[i] = (char *) string; ++ } ++ new_argv[argc] = NULL; ++ ++ return new_argv; ++} ++EOF ++ ;; ++ esac ++ ++ cat <<"EOF" ++void lt_dump_script (FILE* f) ++{ ++EOF ++ func_emit_wrapper yes | ++ $SED -e 's/\([\\"]\)/\\\1/g' \ ++ -e 's/^/ fputs ("/' -e 's/$/\\n", f);/' ++ ++ cat <<"EOF" ++} ++EOF ++} ++# end: func_emit_cwrapperexe_src ++ ++# func_win32_import_lib_p ARG ++# True if ARG is an import lib, as indicated by $file_magic_cmd ++func_win32_import_lib_p () ++{ ++ $opt_debug ++ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in ++ *import*) : ;; ++ *) false ;; ++ esac ++} ++ ++# func_mode_link arg... ++func_mode_link () ++{ ++ $opt_debug ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) ++ # It is impossible to link a dll without this setting, and ++ # we shouldn't force the makefile maintainer to figure out ++ # which system we are compiling for in order to pass an extra ++ # flag for every libtool invocation. ++ # allow_undefined=no ++ ++ # FIXME: Unfortunately, there are problems with the above when trying ++ # to make a dll which has undefined symbols, in which case not ++ # even a static library is built. For now, we need to specify ++ # -no-undefined on the libtool link line when we can be certain ++ # that all symbols are satisfied, otherwise we get a static library. ++ allow_undefined=yes ++ ;; ++ *) ++ allow_undefined=yes ++ ;; ++ esac ++ libtool_args=$nonopt ++ base_compile="$nonopt $@" ++ compile_command=$nonopt ++ finalize_command=$nonopt ++ ++ compile_rpath= ++ finalize_rpath= ++ compile_shlibpath= ++ finalize_shlibpath= ++ convenience= ++ old_convenience= ++ deplibs= ++ old_deplibs= ++ compiler_flags= ++ linker_flags= ++ dllsearchpath= ++ lib_search_path=`pwd` ++ inst_prefix_dir= ++ new_inherited_linker_flags= ++ ++ avoid_version=no ++ bindir= ++ dlfiles= ++ dlprefiles= ++ dlself=no ++ export_dynamic=no ++ export_symbols= ++ export_symbols_regex= ++ generated= ++ libobjs= ++ ltlibs= ++ module=no ++ no_install=no ++ objs= ++ non_pic_objects= ++ precious_files_regex= ++ prefer_static_libs=no ++ preload=no ++ prev= ++ prevarg= ++ release= ++ rpath= ++ xrpath= ++ perm_rpath= ++ temp_rpath= ++ thread_safe=no ++ vinfo= ++ vinfo_number=no ++ weak_libs= ++ single_module="${wl}-single_module" ++ func_infer_tag $base_compile ++ ++ # We need to know -static, to get the right output filenames. ++ for arg ++ do ++ case $arg in ++ -shared) ++ test "$build_libtool_libs" != yes && \ ++ func_fatal_configuration "can not build a shared library" ++ build_old_libs=no ++ break ++ ;; ++ -all-static | -static | -static-libtool-libs) ++ case $arg in ++ -all-static) ++ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then ++ func_warning "complete static linking is impossible in this configuration" ++ fi ++ if test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static ++ fi ++ prefer_static_libs=yes ++ ;; ++ -static) ++ if test -z "$pic_flag" && test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static ++ fi ++ prefer_static_libs=built ++ ;; ++ -static-libtool-libs) ++ if test -z "$pic_flag" && test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static ++ fi ++ prefer_static_libs=yes ++ ;; ++ esac ++ build_libtool_libs=no ++ build_old_libs=yes ++ break ++ ;; ++ esac ++ done ++ ++ # See if our shared archives depend on static archives. ++ test -n "$old_archive_from_new_cmds" && build_old_libs=yes ++ ++ # Go through the arguments, transforming them on the way. ++ while test "$#" -gt 0; do ++ arg="$1" ++ shift ++ func_quote_for_eval "$arg" ++ qarg=$func_quote_for_eval_unquoted_result ++ func_append libtool_args " $func_quote_for_eval_result" ++ ++ # If the previous option needs an argument, assign it. ++ if test -n "$prev"; then ++ case $prev in ++ output) ++ func_append compile_command " @OUTPUT@" ++ func_append finalize_command " @OUTPUT@" ++ ;; ++ esac ++ ++ case $prev in ++ bindir) ++ bindir="$arg" ++ prev= ++ continue ++ ;; ++ dlfiles|dlprefiles) ++ if test "$preload" = no; then ++ # Add the symbol object into the linking commands. ++ func_append compile_command " @SYMFILE@" ++ func_append finalize_command " @SYMFILE@" ++ preload=yes ++ fi ++ case $arg in ++ *.la | *.lo) ;; # We handle these cases below. ++ force) ++ if test "$dlself" = no; then ++ dlself=needless ++ export_dynamic=yes ++ fi ++ prev= ++ continue ++ ;; ++ self) ++ if test "$prev" = dlprefiles; then ++ dlself=yes ++ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then ++ dlself=yes ++ else ++ dlself=needless ++ export_dynamic=yes ++ fi ++ prev= ++ continue ++ ;; ++ *) ++ if test "$prev" = dlfiles; then ++ func_append dlfiles " $arg" ++ else ++ func_append dlprefiles " $arg" ++ fi ++ prev= ++ continue ++ ;; ++ esac ++ ;; ++ expsyms) ++ export_symbols="$arg" ++ test -f "$arg" \ ++ || func_fatal_error "symbol file \`$arg' does not exist" ++ prev= ++ continue ++ ;; ++ expsyms_regex) ++ export_symbols_regex="$arg" ++ prev= ++ continue ++ ;; ++ framework) ++ case $host in ++ *-*-darwin*) ++ case "$deplibs " in ++ *" $qarg.ltframework "*) ;; ++ *) func_append deplibs " $qarg.ltframework" # this is fixed later ++ ;; ++ esac ++ ;; ++ esac ++ prev= ++ continue ++ ;; ++ inst_prefix) ++ inst_prefix_dir="$arg" ++ prev= ++ continue ++ ;; ++ objectlist) ++ if test -f "$arg"; then ++ save_arg=$arg ++ moreargs= ++ for fil in `cat "$save_arg"` ++ do ++# func_append moreargs " $fil" ++ arg=$fil ++ # A libtool-controlled object. ++ ++ # Check to see that this really is a libtool object. ++ if func_lalib_unsafe_p "$arg"; then ++ pic_object= ++ non_pic_object= ++ ++ # Read the .lo file ++ func_source "$arg" ++ ++ if test -z "$pic_object" || ++ test -z "$non_pic_object" || ++ test "$pic_object" = none && ++ test "$non_pic_object" = none; then ++ func_fatal_error "cannot find name of object for \`$arg'" ++ fi ++ ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" ++ ++ if test "$pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ pic_object="$xdir$pic_object" ++ ++ if test "$prev" = dlfiles; then ++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then ++ func_append dlfiles " $pic_object" ++ prev= ++ continue ++ else ++ # If libtool objects are unsupported, then we need to preload. ++ prev=dlprefiles ++ fi ++ fi ++ ++ # CHECK ME: I think I busted this. -Ossama ++ if test "$prev" = dlprefiles; then ++ # Preload the old-style object. ++ func_append dlprefiles " $pic_object" ++ prev= ++ fi ++ ++ # A PIC object. ++ func_append libobjs " $pic_object" ++ arg="$pic_object" ++ fi ++ ++ # Non-PIC object. ++ if test "$non_pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ non_pic_object="$xdir$non_pic_object" ++ ++ # A standard non-PIC object ++ func_append non_pic_objects " $non_pic_object" ++ if test -z "$pic_object" || test "$pic_object" = none ; then ++ arg="$non_pic_object" ++ fi ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ func_append non_pic_objects " $non_pic_object" ++ fi ++ else ++ # Only an error if not doing a dry-run. ++ if $opt_dry_run; then ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" ++ ++ func_lo2o "$arg" ++ pic_object=$xdir$objdir/$func_lo2o_result ++ non_pic_object=$xdir$func_lo2o_result ++ func_append libobjs " $pic_object" ++ func_append non_pic_objects " $non_pic_object" ++ else ++ func_fatal_error "\`$arg' is not a valid libtool object" ++ fi ++ fi ++ done ++ else ++ func_fatal_error "link input file \`$arg' does not exist" ++ fi ++ arg=$save_arg ++ prev= ++ continue ++ ;; ++ precious_regex) ++ precious_files_regex="$arg" ++ prev= ++ continue ++ ;; ++ release) ++ release="-$arg" ++ prev= ++ continue ++ ;; ++ rpath | xrpath) ++ # We need an absolute path. ++ case $arg in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ func_fatal_error "only absolute run-paths are allowed" ++ ;; ++ esac ++ if test "$prev" = rpath; then ++ case "$rpath " in ++ *" $arg "*) ;; ++ *) func_append rpath " $arg" ;; ++ esac ++ else ++ case "$xrpath " in ++ *" $arg "*) ;; ++ *) func_append xrpath " $arg" ;; ++ esac ++ fi ++ prev= ++ continue ++ ;; ++ shrext) ++ shrext_cmds="$arg" ++ prev= ++ continue ++ ;; ++ weak) ++ func_append weak_libs " $arg" ++ prev= ++ continue ++ ;; ++ xcclinker) ++ func_append linker_flags " $qarg" ++ func_append compiler_flags " $qarg" ++ prev= ++ func_append compile_command " $qarg" ++ func_append finalize_command " $qarg" ++ continue ++ ;; ++ xcompiler) ++ func_append compiler_flags " $qarg" ++ prev= ++ func_append compile_command " $qarg" ++ func_append finalize_command " $qarg" ++ continue ++ ;; ++ xlinker) ++ func_append linker_flags " $qarg" ++ func_append compiler_flags " $wl$qarg" ++ prev= ++ func_append compile_command " $wl$qarg" ++ func_append finalize_command " $wl$qarg" ++ continue ++ ;; ++ *) ++ eval "$prev=\"\$arg\"" ++ prev= ++ continue ++ ;; ++ esac ++ fi # test -n "$prev" ++ ++ prevarg="$arg" ++ ++ case $arg in ++ -all-static) ++ if test -n "$link_static_flag"; then ++ # See comment for -static flag below, for more details. ++ func_append compile_command " $link_static_flag" ++ func_append finalize_command " $link_static_flag" ++ fi ++ continue ++ ;; ++ ++ -allow-undefined) ++ # FIXME: remove this flag sometime in the future. ++ func_fatal_error "\`-allow-undefined' must not be used because it is the default" ++ ;; ++ ++ -avoid-version) ++ avoid_version=yes ++ continue ++ ;; ++ ++ -bindir) ++ prev=bindir ++ continue ++ ;; ++ ++ -dlopen) ++ prev=dlfiles ++ continue ++ ;; ++ ++ -dlpreopen) ++ prev=dlprefiles ++ continue ++ ;; ++ ++ -export-dynamic) ++ export_dynamic=yes ++ continue ++ ;; ++ ++ -export-symbols | -export-symbols-regex) ++ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then ++ func_fatal_error "more than one -exported-symbols argument is not allowed" ++ fi ++ if test "X$arg" = "X-export-symbols"; then ++ prev=expsyms ++ else ++ prev=expsyms_regex ++ fi ++ continue ++ ;; ++ ++ -framework) ++ prev=framework ++ continue ++ ;; ++ ++ -inst-prefix-dir) ++ prev=inst_prefix ++ continue ++ ;; ++ ++ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* ++ # so, if we see these flags be careful not to treat them like -L ++ -L[A-Z][A-Z]*:*) ++ case $with_gcc/$host in ++ no/*-*-irix* | /*-*-irix*) ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ ;; ++ esac ++ continue ++ ;; ++ ++ -L*) ++ func_stripname "-L" '' "$arg" ++ if test -z "$func_stripname_result"; then ++ if test "$#" -gt 0; then ++ func_fatal_error "require no space between \`-L' and \`$1'" ++ else ++ func_fatal_error "need path for \`-L' option" ++ fi ++ fi ++ func_resolve_sysroot "$func_stripname_result" ++ dir=$func_resolve_sysroot_result ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ absdir=`cd "$dir" && pwd` ++ test -z "$absdir" && \ ++ func_fatal_error "cannot determine absolute directory name of \`$dir'" ++ dir="$absdir" ++ ;; ++ esac ++ case "$deplibs " in ++ *" -L$dir "* | *" $arg "*) ++ # Will only happen for absolute or sysroot arguments ++ ;; ++ *) ++ # Preserve sysroot, but never include relative directories ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; ++ *) func_append deplibs " -L$dir" ;; ++ esac ++ func_append lib_search_path " $dir" ++ ;; ++ esac ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) ++ testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` ++ case :$dllsearchpath: in ++ *":$dir:"*) ;; ++ ::) dllsearchpath=$dir;; ++ *) func_append dllsearchpath ":$dir";; ++ esac ++ case :$dllsearchpath: in ++ *":$testbindir:"*) ;; ++ ::) dllsearchpath=$testbindir;; ++ *) func_append dllsearchpath ":$testbindir";; ++ esac ++ ;; ++ esac ++ continue ++ ;; ++ ++ -l*) ++ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) ++ # These systems don't actually have a C or math library (as such) ++ continue ++ ;; ++ *-*-os2*) ++ # These systems don't actually have a C library (as such) ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc due to us having libc/libc_r. ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # Rhapsody C and math libraries are in the System framework ++ func_append deplibs " System.ltframework" ++ continue ++ ;; ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work ++ test "X$arg" = "X-lc" && continue ++ ;; ++ esac ++ elif test "X$arg" = "X-lc_r"; then ++ case $host in ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc_r directly, use -pthread flag. ++ continue ++ ;; ++ esac ++ fi ++ func_append deplibs " $arg" ++ continue ++ ;; ++ ++ -module) ++ module=yes ++ continue ++ ;; ++ ++ # Tru64 UNIX uses -model [arg] to determine the layout of C++ ++ # classes, name mangling, and exception handling. ++ # Darwin uses the -arch flag to determine output architecture. ++ -model|-arch|-isysroot|--sysroot) ++ func_append compiler_flags " $arg" ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ prev=xcompiler ++ continue ++ ;; ++ ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) ++ func_append compiler_flags " $arg" ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ case "$new_inherited_linker_flags " in ++ *" $arg "*) ;; ++ * ) func_append new_inherited_linker_flags " $arg" ;; ++ esac ++ continue ++ ;; ++ ++ -multi_module) ++ single_module="${wl}-multi_module" ++ continue ++ ;; ++ ++ -no-fast-install) ++ fast_install=no ++ continue ++ ;; ++ ++ -no-install) ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) ++ # The PATH hackery in wrapper scripts is required on Windows ++ # and Darwin in order for the loader to find any dlls it needs. ++ func_warning "\`-no-install' is ignored for $host" ++ func_warning "assuming \`-no-fast-install' instead" ++ fast_install=no ++ ;; ++ *) no_install=yes ;; ++ esac ++ continue ++ ;; ++ ++ -no-undefined) ++ allow_undefined=no ++ continue ++ ;; ++ ++ -objectlist) ++ prev=objectlist ++ continue ++ ;; ++ ++ -o) prev=output ;; ++ ++ -precious-files-regex) ++ prev=precious_regex ++ continue ++ ;; ++ ++ -release) ++ prev=release ++ continue ++ ;; ++ ++ -rpath) ++ prev=rpath ++ continue ++ ;; ++ ++ -R) ++ prev=xrpath ++ continue ++ ;; ++ ++ -R*) ++ func_stripname '-R' '' "$arg" ++ dir=$func_stripname_result ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ =*) ++ func_stripname '=' '' "$dir" ++ dir=$lt_sysroot$func_stripname_result ++ ;; ++ *) ++ func_fatal_error "only absolute run-paths are allowed" ++ ;; ++ esac ++ case "$xrpath " in ++ *" $dir "*) ;; ++ *) func_append xrpath " $dir" ;; ++ esac ++ continue ++ ;; ++ ++ -shared) ++ # The effects of -shared are defined in a previous loop. ++ continue ++ ;; ++ ++ -shrext) ++ prev=shrext ++ continue ++ ;; ++ ++ -static | -static-libtool-libs) ++ # The effects of -static are defined in a previous loop. ++ # We used to do the same as -all-static on platforms that ++ # didn't have a PIC flag, but the assumption that the effects ++ # would be equivalent was wrong. It would break on at least ++ # Digital Unix and AIX. ++ continue ++ ;; ++ ++ -thread-safe) ++ thread_safe=yes ++ continue ++ ;; ++ ++ -version-info) ++ prev=vinfo ++ continue ++ ;; ++ ++ -version-number) ++ prev=vinfo ++ vinfo_number=yes ++ continue ++ ;; ++ ++ -weak) ++ prev=weak ++ continue ++ ;; ++ ++ -Wc,*) ++ func_stripname '-Wc,' '' "$arg" ++ args=$func_stripname_result ++ arg= ++ save_ifs="$IFS"; IFS=',' ++ for flag in $args; do ++ IFS="$save_ifs" ++ func_quote_for_eval "$flag" ++ func_append arg " $func_quote_for_eval_result" ++ func_append compiler_flags " $func_quote_for_eval_result" ++ done ++ IFS="$save_ifs" ++ func_stripname ' ' '' "$arg" ++ arg=$func_stripname_result ++ ;; ++ ++ -Wl,*) ++ func_stripname '-Wl,' '' "$arg" ++ args=$func_stripname_result ++ arg= ++ save_ifs="$IFS"; IFS=',' ++ for flag in $args; do ++ IFS="$save_ifs" ++ func_quote_for_eval "$flag" ++ func_append arg " $wl$func_quote_for_eval_result" ++ func_append compiler_flags " $wl$func_quote_for_eval_result" ++ func_append linker_flags " $func_quote_for_eval_result" ++ done ++ IFS="$save_ifs" ++ func_stripname ' ' '' "$arg" ++ arg=$func_stripname_result ++ ;; ++ ++ -Xcompiler) ++ prev=xcompiler ++ continue ++ ;; ++ ++ -Xlinker) ++ prev=xlinker ++ continue ++ ;; ++ ++ -XCClinker) ++ prev=xcclinker ++ continue ++ ;; ++ ++ # -msg_* for osf cc ++ -msg_*) ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ ;; ++ ++ # Flags to be passed through unchanged, with rationale: ++ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler ++ # -r[0-9][0-9]* specify processor for the SGI compiler ++ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler ++ # +DA*, +DD* enable 64-bit mode for the HP compiler ++ # -q* compiler args for the IBM compiler ++ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC ++ # -F/path path to uninstalled frameworks, gcc on darwin ++ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC ++ # @file GCC response files ++ # -tp=* Portland pgcc target processor selection ++ # --sysroot=* for sysroot support ++ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization ++ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ ++ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ ++ -O*|-flto*|-fwhopr*|-fuse-linker-plugin) ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ func_append compiler_flags " $arg" ++ continue ++ ;; ++ ++ # Some other compiler flag. ++ -* | +*) ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ ;; + +- if test -n "$rpath"; then +- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 +- fi ++ *.$objext) ++ # A standard object. ++ func_append objs " $arg" ++ ;; + +- if test -n "$xrpath"; then +- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 +- fi ++ *.lo) ++ # A libtool-controlled object. + +- if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 +- fi ++ # Check to see that this really is a libtool object. ++ if func_lalib_unsafe_p "$arg"; then ++ pic_object= ++ non_pic_object= ++ ++ # Read the .lo file ++ func_source "$arg" ++ ++ if test -z "$pic_object" || ++ test -z "$non_pic_object" || ++ test "$pic_object" = none && ++ test "$non_pic_object" = none; then ++ func_fatal_error "cannot find name of object for \`$arg'" ++ fi ++ ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" ++ ++ if test "$pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ pic_object="$xdir$pic_object" + +- if test -n "$release"; then +- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 +- fi ++ if test "$prev" = dlfiles; then ++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then ++ func_append dlfiles " $pic_object" ++ prev= ++ continue ++ else ++ # If libtool objects are unsupported, then we need to preload. ++ prev=dlprefiles ++ fi ++ fi + +- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then +- $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 +- fi ++ # CHECK ME: I think I busted this. -Ossama ++ if test "$prev" = dlprefiles; then ++ # Preload the old-style object. ++ func_append dlprefiles " $pic_object" ++ prev= ++ fi + +- # Now set the variables for building old libraries. +- build_libtool_libs=no +- oldlibs="$output" +- objs="$objs$old_deplibs" +- ;; ++ # A PIC object. ++ func_append libobjs " $pic_object" ++ arg="$pic_object" ++ fi + +- lib) +- # Make sure we only generate libraries of the form `libNAME.la'. +- case $outputname in +- lib*) +- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` +- eval libname=\"$libname_spec\" +- ;; +- *) +- if test "$module" = no; then +- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 +- $echo "$help" 1>&2 +- exit 1 +- fi +- if test "$need_lib_prefix" != no; then +- # Add the "lib" prefix for modules if required +- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` +- eval libname=\"$libname_spec\" ++ # Non-PIC object. ++ if test "$non_pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ non_pic_object="$xdir$non_pic_object" ++ ++ # A standard non-PIC object ++ func_append non_pic_objects " $non_pic_object" ++ if test -z "$pic_object" || test "$pic_object" = none ; then ++ arg="$non_pic_object" ++ fi ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ func_append non_pic_objects " $non_pic_object" ++ fi + else +- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` ++ # Only an error if not doing a dry-run. ++ if $opt_dry_run; then ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" ++ ++ func_lo2o "$arg" ++ pic_object=$xdir$objdir/$func_lo2o_result ++ non_pic_object=$xdir$func_lo2o_result ++ func_append libobjs " $pic_object" ++ func_append non_pic_objects " $non_pic_object" ++ else ++ func_fatal_error "\`$arg' is not a valid libtool object" ++ fi + fi + ;; +- esac + +- if test -n "$objs"; then +- if test "$deplibs_check_method" != pass_all; then +- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 +- exit 1 ++ *.$libext) ++ # An archive. ++ func_append deplibs " $arg" ++ func_append old_deplibs " $arg" ++ continue ++ ;; ++ ++ *.la) ++ # A libtool-controlled library. ++ ++ func_resolve_sysroot "$arg" ++ if test "$prev" = dlfiles; then ++ # This library was specified with -dlopen. ++ func_append dlfiles " $func_resolve_sysroot_result" ++ prev= ++ elif test "$prev" = dlprefiles; then ++ # The library was specified with -dlpreopen. ++ func_append dlprefiles " $func_resolve_sysroot_result" ++ prev= + else +- echo +- echo "*** Warning: Linking the shared library $output against the non-libtool" +- echo "*** objects $objs is not portable!" +- libobjs="$libobjs $objs" ++ func_append deplibs " $func_resolve_sysroot_result" + fi +- fi ++ continue ++ ;; + +- if test "$dlself" != no; then +- $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 +- fi ++ # Some other compiler argument. ++ *) ++ # Unknown arguments in both finalize_command and compile_command need ++ # to be aesthetically quoted because they are evaled later. ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ ;; ++ esac # arg + +- set dummy $rpath +- if test $# -gt 2; then +- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 ++ # Now actually substitute the argument into the commands. ++ if test -n "$arg"; then ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" + fi +- install_libdir="$2" ++ done # argument parsing loop + +- oldlibs= +- if test -z "$rpath"; then +- if test "$build_libtool_libs" = yes; then +- # Building a libtool convenience library. +- libext=al +- oldlibs="$output_objdir/$libname.$libext $oldlibs" +- build_libtool_libs=convenience +- build_old_libs=yes +- fi ++ test -n "$prev" && \ ++ func_fatal_help "the \`$prevarg' option requires an argument" + +- if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 +- fi ++ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then ++ eval arg=\"$export_dynamic_flag_spec\" ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ fi + +- if test -n "$release"; then +- $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 +- fi +- else ++ oldlibs= ++ # calculate the name of the file, without its directory ++ func_basename "$output" ++ outputname="$func_basename_result" ++ libobjs_save="$libobjs" + +- # Parse the version information argument. +- save_ifs="$IFS"; IFS=':' +- set dummy $vinfo 0 0 0 +- IFS="$save_ifs" ++ if test -n "$shlibpath_var"; then ++ # get the directories listed in $shlibpath_var ++ eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` ++ else ++ shlib_search_path= ++ fi ++ eval sys_lib_search_path=\"$sys_lib_search_path_spec\" ++ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + +- if test -n "$8"; then +- $echo "$modename: too many parameters to \`-version-info'" 1>&2 +- $echo "$help" 1>&2 +- exit 1 +- fi ++ func_dirname "$output" "/" "" ++ output_objdir="$func_dirname_result$objdir" ++ func_to_tool_file "$output_objdir/" ++ tool_output_objdir=$func_to_tool_file_result ++ # Create the object directory. ++ func_mkdir_p "$output_objdir" ++ ++ # Determine the type of output ++ case $output in ++ "") ++ func_fatal_help "you must specify an output file" ++ ;; ++ *.$libext) linkmode=oldlib ;; ++ *.lo | *.$objext) linkmode=obj ;; ++ *.la) linkmode=lib ;; ++ *) linkmode=prog ;; # Anything else should be a program. ++ esac + +- current="$2" +- revision="$3" +- age="$4" ++ specialdeplibs= + +- # Check that each of the things are valid numbers. +- case $current in +- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; +- *) +- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 +- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit 1 ++ libs= ++ # Find all interdependent deplibs by searching for libraries ++ # that are linked more than once (e.g. -la -lb -la) ++ for deplib in $deplibs; do ++ if $opt_preserve_dup_deps ; then ++ case "$libs " in ++ *" $deplib "*) func_append specialdeplibs " $deplib" ;; ++ esac ++ fi ++ func_append libs " $deplib" ++ done ++ ++ if test "$linkmode" = lib; then ++ libs="$predeps $libs $compiler_lib_search_path $postdeps" ++ ++ # Compute libraries that are listed more than once in $predeps ++ # $postdeps and mark them as special (i.e., whose duplicates are ++ # not to be eliminated). ++ pre_post_deps= ++ if $opt_duplicate_compiler_generated_deps; then ++ for pre_post_dep in $predeps $postdeps; do ++ case "$pre_post_deps " in ++ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; ++ esac ++ func_append pre_post_deps " $pre_post_dep" ++ done ++ fi ++ pre_post_deps= ++ fi ++ ++ deplibs= ++ newdependency_libs= ++ newlib_search_path= ++ need_relink=no # whether we're linking any uninstalled libtool libraries ++ notinst_deplibs= # not-installed libtool libraries ++ notinst_path= # paths that contain not-installed libtool libraries ++ ++ case $linkmode in ++ lib) ++ passes="conv dlpreopen link" ++ for file in $dlfiles $dlprefiles; do ++ case $file in ++ *.la) ;; ++ *) ++ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ++ ;; ++ esac ++ done ++ ;; ++ prog) ++ compile_deplibs= ++ finalize_deplibs= ++ alldeplibs=no ++ newdlfiles= ++ newdlprefiles= ++ passes="conv scan dlopen dlpreopen link" ++ ;; ++ *) passes="conv" ++ ;; ++ esac ++ ++ for pass in $passes; do ++ # The preopen pass in lib mode reverses $deplibs; put it back here ++ # so that -L comes before libs that need it for instance... ++ if test "$linkmode,$pass" = "lib,link"; then ++ ## FIXME: Find the place where the list is rebuilt in the wrong ++ ## order, and fix it there properly ++ tmp_deplibs= ++ for deplib in $deplibs; do ++ tmp_deplibs="$deplib $tmp_deplibs" ++ done ++ deplibs="$tmp_deplibs" ++ fi ++ ++ if test "$linkmode,$pass" = "lib,link" || ++ test "$linkmode,$pass" = "prog,scan"; then ++ libs="$deplibs" ++ deplibs= ++ fi ++ if test "$linkmode" = prog; then ++ case $pass in ++ dlopen) libs="$dlfiles" ;; ++ dlpreopen) libs="$dlprefiles" ;; ++ link) ++ libs="$deplibs %DEPLIBS%" ++ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" + ;; + esac ++ fi ++ if test "$linkmode,$pass" = "lib,dlpreopen"; then ++ # Collect and forward deplibs of preopened libtool libs ++ for lib in $dlprefiles; do ++ # Ignore non-libtool-libs ++ dependency_libs= ++ func_resolve_sysroot "$lib" ++ case $lib in ++ *.la) func_source "$func_resolve_sysroot_result" ;; ++ esac + +- case $revision in +- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; +- *) +- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 +- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit 1 ++ # Collect preopened libtool deplibs, except any this library ++ # has declared as weak libs ++ for deplib in $dependency_libs; do ++ func_basename "$deplib" ++ deplib_base=$func_basename_result ++ case " $weak_libs " in ++ *" $deplib_base "*) ;; ++ *) func_append deplibs " $deplib" ;; ++ esac ++ done ++ done ++ libs="$dlprefiles" ++ fi ++ if test "$pass" = dlopen; then ++ # Collect dlpreopened libraries ++ save_deplibs="$deplibs" ++ deplibs= ++ fi ++ ++ for deplib in $libs; do ++ lib= ++ found=no ++ case $deplib in ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ func_append compiler_flags " $deplib" ++ if test "$linkmode" = lib ; then ++ case "$new_inherited_linker_flags " in ++ *" $deplib "*) ;; ++ * ) func_append new_inherited_linker_flags " $deplib" ;; ++ esac ++ fi ++ fi ++ continue ++ ;; ++ -l*) ++ if test "$linkmode" != lib && test "$linkmode" != prog; then ++ func_warning "\`-l' is ignored for archives/objects" ++ continue ++ fi ++ func_stripname '-l' '' "$deplib" ++ name=$func_stripname_result ++ if test "$linkmode" = lib; then ++ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" ++ else ++ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" ++ fi ++ for searchdir in $searchdirs; do ++ for search_ext in .la $std_shrext .so .a; do ++ # Search the libtool library ++ lib="$searchdir/lib${name}${search_ext}" ++ if test -f "$lib"; then ++ if test "$search_ext" = ".la"; then ++ found=yes ++ else ++ found=no ++ fi ++ break 2 ++ fi ++ done ++ done ++ if test "$found" != yes; then ++ # deplib doesn't seem to be a libtool library ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" ++ fi ++ continue ++ else # deplib is a libtool library ++ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, ++ # We need to do some special things here, and not later. ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $deplib "*) ++ if func_lalib_p "$lib"; then ++ library_names= ++ old_library= ++ func_source "$lib" ++ for l in $old_library $library_names; do ++ ll="$l" ++ done ++ if test "X$ll" = "X$old_library" ; then # only static version available ++ found=no ++ func_dirname "$lib" "" "." ++ ladir="$func_dirname_result" ++ lib=$ladir/$old_library ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" ++ fi ++ continue ++ fi ++ fi ++ ;; ++ *) ;; ++ esac ++ fi ++ fi ++ ;; # -l ++ *.ltframework) ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ if test "$linkmode" = lib ; then ++ case "$new_inherited_linker_flags " in ++ *" $deplib "*) ;; ++ * ) func_append new_inherited_linker_flags " $deplib" ;; ++ esac ++ fi ++ fi ++ continue ++ ;; ++ -L*) ++ case $linkmode in ++ lib) ++ deplibs="$deplib $deplibs" ++ test "$pass" = conv && continue ++ newdependency_libs="$deplib $newdependency_libs" ++ func_stripname '-L' '' "$deplib" ++ func_resolve_sysroot "$func_stripname_result" ++ func_append newlib_search_path " $func_resolve_sysroot_result" ++ ;; ++ prog) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ continue ++ fi ++ if test "$pass" = scan; then ++ deplibs="$deplib $deplibs" ++ else ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ fi ++ func_stripname '-L' '' "$deplib" ++ func_resolve_sysroot "$func_stripname_result" ++ func_append newlib_search_path " $func_resolve_sysroot_result" ++ ;; ++ *) ++ func_warning "\`-L' is ignored for archives/objects" ++ ;; ++ esac # linkmode ++ continue ++ ;; # -L ++ -R*) ++ if test "$pass" = link; then ++ func_stripname '-R' '' "$deplib" ++ func_resolve_sysroot "$func_stripname_result" ++ dir=$func_resolve_sysroot_result ++ # Make sure the xrpath contains only unique directories. ++ case "$xrpath " in ++ *" $dir "*) ;; ++ *) func_append xrpath " $dir" ;; ++ esac ++ fi ++ deplibs="$deplib $deplibs" ++ continue ++ ;; ++ *.la) ++ func_resolve_sysroot "$deplib" ++ lib=$func_resolve_sysroot_result ++ ;; ++ *.$libext) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ continue ++ fi ++ case $linkmode in ++ lib) ++ # Linking convenience modules into shared libraries is allowed, ++ # but linking other static libraries is non-portable. ++ case " $dlpreconveniencelibs " in ++ *" $deplib "*) ;; ++ *) ++ valid_a_lib=no ++ case $deplibs_check_method in ++ match_pattern*) ++ set dummy $deplibs_check_method; shift ++ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` ++ if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ ++ | $EGREP "$match_pattern_regex" > /dev/null; then ++ valid_a_lib=yes ++ fi ++ ;; ++ pass_all) ++ valid_a_lib=yes ++ ;; ++ esac ++ if test "$valid_a_lib" != yes; then ++ echo ++ $ECHO "*** Warning: Trying to link with static lib archive $deplib." ++ echo "*** I have the capability to make that library automatically link in when" ++ echo "*** you link to this library. But I can only do this if you have a" ++ echo "*** shared version of the library, which you do not appear to have" ++ echo "*** because the file extensions .$libext of this argument makes me believe" ++ echo "*** that it is just a static archive that I should not use here." ++ else ++ echo ++ $ECHO "*** Warning: Linking the shared library $output against the" ++ $ECHO "*** static library $deplib is not portable!" ++ deplibs="$deplib $deplibs" ++ fi ++ ;; ++ esac ++ continue ++ ;; ++ prog) ++ if test "$pass" != link; then ++ deplibs="$deplib $deplibs" ++ else ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ fi ++ continue ++ ;; ++ esac # linkmode ++ ;; # *.$libext ++ *.lo | *.$objext) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ elif test "$linkmode" = prog; then ++ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then ++ # If there is no dlopen support or we're linking statically, ++ # we need to preload. ++ func_append newdlprefiles " $deplib" ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ func_append newdlfiles " $deplib" ++ fi ++ fi ++ continue + ;; +- esac +- +- case $age in +- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; +- *) +- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 +- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit 1 ++ %DEPLIBS%) ++ alldeplibs=yes ++ continue + ;; +- esac ++ esac # case $deplib + +- if test $age -gt $current; then +- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 +- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit 1 ++ if test "$found" = yes || test -f "$lib"; then : ++ else ++ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" + fi + +- # Calculate the version variables. +- major= +- versuffix= +- verstring= +- case $version_type in +- none) ;; ++ # Check to see that this really is a libtool archive. ++ func_lalib_unsafe_p "$lib" \ ++ || func_fatal_error "\`$lib' is not a valid libtool archive" + +- darwin) +- # Like Linux, but with the current version available in +- # verstring for coding it into the library header +- major=.`expr $current - $age` +- versuffix="$major.$age.$revision" +- # Darwin ld doesn't like 0 for these options... +- minor_current=`expr $current + 1` +- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" +- ;; ++ func_dirname "$lib" "" "." ++ ladir="$func_dirname_result" + +- freebsd-aout) +- major=".$current" +- versuffix=".$current.$revision"; +- ;; ++ dlname= ++ dlopen= ++ dlpreopen= ++ libdir= ++ library_names= ++ old_library= ++ inherited_linker_flags= ++ # If the library was installed with an old release of libtool, ++ # it will not redefine variables installed, or shouldnotlink ++ installed=yes ++ shouldnotlink=no ++ avoidtemprpath= + +- freebsd-elf) +- major=".$current" +- versuffix=".$current"; +- ;; + +- irix) +- major=`expr $current - $age + 1` +- verstring="sgi$major.$revision" ++ # Read the .la file ++ func_source "$lib" + +- # Add in all the interfaces that we are compatible with. +- loop=$revision +- while test $loop != 0; do +- iface=`expr $revision - $loop` +- loop=`expr $loop - 1` +- verstring="sgi$major.$iface:$verstring" ++ # Convert "-framework foo" to "foo.ltframework" ++ if test -n "$inherited_linker_flags"; then ++ tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` ++ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do ++ case " $new_inherited_linker_flags " in ++ *" $tmp_inherited_linker_flag "*) ;; ++ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; ++ esac + done ++ fi ++ dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ++ if test "$linkmode,$pass" = "lib,link" || ++ test "$linkmode,$pass" = "prog,scan" || ++ { test "$linkmode" != prog && test "$linkmode" != lib; }; then ++ test -n "$dlopen" && func_append dlfiles " $dlopen" ++ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" ++ fi + +- # Before this point, $major must not contain `.'. +- major=.$major +- versuffix="$major.$revision" +- ;; +- +- linux) +- major=.`expr $current - $age` +- versuffix="$major.$age.$revision" +- ;; ++ if test "$pass" = conv; then ++ # Only check for convenience libraries ++ deplibs="$lib $deplibs" ++ if test -z "$libdir"; then ++ if test -z "$old_library"; then ++ func_fatal_error "cannot find name of link library for \`$lib'" ++ fi ++ # It is a libtool convenience library, so add in its objects. ++ func_append convenience " $ladir/$objdir/$old_library" ++ func_append old_convenience " $ladir/$objdir/$old_library" ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ deplibs="$deplib $deplibs" ++ if $opt_preserve_dup_deps ; then ++ case "$tmp_libs " in ++ *" $deplib "*) func_append specialdeplibs " $deplib" ;; ++ esac ++ fi ++ func_append tmp_libs " $deplib" ++ done ++ elif test "$linkmode" != prog && test "$linkmode" != lib; then ++ func_fatal_error "\`$lib' is not a convenience library" ++ fi ++ continue ++ fi # $pass = conv + +- osf) +- major=`expr $current - $age` +- versuffix=".$current.$age.$revision" +- verstring="$current.$age.$revision" + +- # Add in all the interfaces that we are compatible with. +- loop=$age +- while test $loop != 0; do +- iface=`expr $current - $loop` +- loop=`expr $loop - 1` +- verstring="$verstring:${iface}.0" ++ # Get the name of the library we link against. ++ linklib= ++ if test -n "$old_library" && ++ { test "$prefer_static_libs" = yes || ++ test "$prefer_static_libs,$installed" = "built,no"; }; then ++ linklib=$old_library ++ else ++ for l in $old_library $library_names; do ++ linklib="$l" + done ++ fi ++ if test -z "$linklib"; then ++ func_fatal_error "cannot find name of link library for \`$lib'" ++ fi + +- # Make executables depend on our current version. +- verstring="$verstring:${current}.0" +- ;; +- +- sunos) +- major=".$current" +- versuffix=".$current.$revision" +- ;; +- +- windows) +- # Use '-' rather than '.', since we only want one +- # extension on DOS 8.3 filesystems. +- major=`expr $current - $age` +- versuffix="-$major" +- ;; ++ # This library was specified with -dlopen. ++ if test "$pass" = dlopen; then ++ if test -z "$libdir"; then ++ func_fatal_error "cannot -dlopen a convenience library: \`$lib'" ++ fi ++ if test -z "$dlname" || ++ test "$dlopen_support" != yes || ++ test "$build_libtool_libs" = no; then ++ # If there is no dlname, no dlopen support or we're linking ++ # statically, we need to preload. We also need to preload any ++ # dependent libraries so libltdl's deplib preloader doesn't ++ # bomb out in the load deplibs phase. ++ func_append dlprefiles " $lib $dependency_libs" ++ else ++ func_append newdlfiles " $lib" ++ fi ++ continue ++ fi # $pass = dlopen + ++ # We need an absolute path. ++ case $ladir in ++ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) +- $echo "$modename: unknown library version type \`$version_type'" 1>&2 +- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 +- exit 1 ++ abs_ladir=`cd "$ladir" && pwd` ++ if test -z "$abs_ladir"; then ++ func_warning "cannot determine absolute directory name of \`$ladir'" ++ func_warning "passing it literally to the linker, although it might fail" ++ abs_ladir="$ladir" ++ fi + ;; + esac ++ func_basename "$lib" ++ laname="$func_basename_result" + +- # Clear the version info if we defaulted, and they specified a release. +- if test -z "$vinfo" && test -n "$release"; then +- major= +- verstring="0.0" +- case $version_type in +- darwin) +- # we can't check for "0.0" in archive_cmds due to quoting +- # problems, so we reset it completely +- verstring="" ++ # Find the relevant object directory and library name. ++ if test "X$installed" = Xyes; then ++ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then ++ func_warning "library \`$lib' was moved." ++ dir="$ladir" ++ absdir="$abs_ladir" ++ libdir="$abs_ladir" ++ else ++ dir="$lt_sysroot$libdir" ++ absdir="$lt_sysroot$libdir" ++ fi ++ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes ++ else ++ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then ++ dir="$ladir" ++ absdir="$abs_ladir" ++ # Remove this search path later ++ func_append notinst_path " $abs_ladir" ++ else ++ dir="$ladir/$objdir" ++ absdir="$abs_ladir/$objdir" ++ # Remove this search path later ++ func_append notinst_path " $abs_ladir" ++ fi ++ fi # $installed = yes ++ func_stripname 'lib' '.la' "$laname" ++ name=$func_stripname_result ++ ++ # This library was specified with -dlpreopen. ++ if test "$pass" = dlpreopen; then ++ if test -z "$libdir" && test "$linkmode" = prog; then ++ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" ++ fi ++ case "$host" in ++ # special handling for platforms with PE-DLLs. ++ *cygwin* | *mingw* | *cegcc* ) ++ # Linker will automatically link against shared library if both ++ # static and shared are present. Therefore, ensure we extract ++ # symbols from the import library if a shared library is present ++ # (otherwise, the dlopen module name will be incorrect). We do ++ # this by putting the import library name into $newdlprefiles. ++ # We recover the dlopen module name by 'saving' the la file ++ # name in a special purpose variable, and (later) extracting the ++ # dlname from the la file. ++ if test -n "$dlname"; then ++ func_tr_sh "$dir/$linklib" ++ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" ++ func_append newdlprefiles " $dir/$linklib" ++ else ++ func_append newdlprefiles " $dir/$old_library" ++ # Keep a list of preopened convenience libraries to check ++ # that they are being used correctly in the link pass. ++ test -z "$libdir" && \ ++ func_append dlpreconveniencelibs " $dir/$old_library" ++ fi + ;; +- *) +- verstring="0.0" ++ * ) ++ # Prefer using a static library (so that no silly _DYNAMIC symbols ++ # are required to link). ++ if test -n "$old_library"; then ++ func_append newdlprefiles " $dir/$old_library" ++ # Keep a list of preopened convenience libraries to check ++ # that they are being used correctly in the link pass. ++ test -z "$libdir" && \ ++ func_append dlpreconveniencelibs " $dir/$old_library" ++ # Otherwise, use the dlname, so that lt_dlopen finds it. ++ elif test -n "$dlname"; then ++ func_append newdlprefiles " $dir/$dlname" ++ else ++ func_append newdlprefiles " $dir/$linklib" ++ fi + ;; + esac +- if test "$need_version" = no; then +- versuffix= ++ fi # $pass = dlpreopen ++ ++ if test -z "$libdir"; then ++ # Link the convenience library ++ if test "$linkmode" = lib; then ++ deplibs="$dir/$old_library $deplibs" ++ elif test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$dir/$old_library $compile_deplibs" ++ finalize_deplibs="$dir/$old_library $finalize_deplibs" + else +- versuffix=".0.0" ++ deplibs="$lib $deplibs" # used for prog,scan pass + fi ++ continue + fi + +- # Remove version info from name if versioning should be avoided +- if test "$avoid_version" = yes && test "$need_version" = no; then +- major= +- versuffix= +- verstring="" +- fi + +- # Check to see if the archive will have undefined symbols. +- if test "$allow_undefined" = yes; then +- if test "$allow_undefined_flag" = unsupported; then +- $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 +- build_libtool_libs=no +- build_old_libs=yes +- fi +- else +- # Don't allow undefined symbols. +- allow_undefined_flag="$no_undefined_flag" +- fi +- fi ++ if test "$linkmode" = prog && test "$pass" != link; then ++ func_append newlib_search_path " $ladir" ++ deplibs="$lib $deplibs" + +- if test "$mode" != relink; then +- # Remove our outputs. +- $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" +- $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* +- fi ++ linkalldeplibs=no ++ if test "$link_all_deplibs" != no || test -z "$library_names" || ++ test "$build_libtool_libs" = no; then ++ linkalldeplibs=yes ++ fi + +- # Now set the variables for building old libraries. +- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then +- oldlibs="$oldlibs $output_objdir/$libname.$libext" ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ case $deplib in ++ -L*) func_stripname '-L' '' "$deplib" ++ func_resolve_sysroot "$func_stripname_result" ++ func_append newlib_search_path " $func_resolve_sysroot_result" ++ ;; ++ esac ++ # Need to link against all dependency_libs? ++ if test "$linkalldeplibs" = yes; then ++ deplibs="$deplib $deplibs" ++ else ++ # Need to hardcode shared library paths ++ # or/and link against static libraries ++ newdependency_libs="$deplib $newdependency_libs" ++ fi ++ if $opt_preserve_dup_deps ; then ++ case "$tmp_libs " in ++ *" $deplib "*) func_append specialdeplibs " $deplib" ;; ++ esac ++ fi ++ func_append tmp_libs " $deplib" ++ done # for deplib ++ continue ++ fi # $linkmode = prog... + +- # Transform .lo files to .o files. +- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` +- fi ++ if test "$linkmode,$pass" = "prog,link"; then ++ if test -n "$library_names" && ++ { { test "$prefer_static_libs" = no || ++ test "$prefer_static_libs,$installed" = "built,yes"; } || ++ test -z "$old_library"; }; then ++ # We need to hardcode the library path ++ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then ++ # Make sure the rpath contains only unique directories. ++ case "$temp_rpath:" in ++ *"$absdir:"*) ;; ++ *) func_append temp_rpath "$absdir:" ;; ++ esac ++ fi + +- # Eliminate all temporary directories. +- for path in $notinst_path; do +- lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'` +- deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'` +- dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'` +- done ++ # Hardcode the library path. ++ # Skip directories that are in the system default run-time ++ # search path. ++ case " $sys_lib_dlsearch_path " in ++ *" $absdir "*) ;; ++ *) ++ case "$compile_rpath " in ++ *" $absdir "*) ;; ++ *) func_append compile_rpath " $absdir" ;; ++ esac ++ ;; ++ esac ++ case " $sys_lib_dlsearch_path " in ++ *" $libdir "*) ;; ++ *) ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) func_append finalize_rpath " $libdir" ;; ++ esac ++ ;; ++ esac ++ fi # $linkmode,$pass = prog,link... + +- if test -n "$xrpath"; then +- # If the user specified any rpath flags, then add them. +- temp_xrpath= +- for libdir in $xrpath; do +- temp_xrpath="$temp_xrpath -R$libdir" +- case "$finalize_rpath " in +- *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" ;; +- esac +- done +- if test $hardcode_into_libs != yes || test $build_old_libs = yes; then +- dependency_libs="$temp_xrpath $dependency_libs" ++ if test "$alldeplibs" = yes && ++ { test "$deplibs_check_method" = pass_all || ++ { test "$build_libtool_libs" = yes && ++ test -n "$library_names"; }; }; then ++ # We only need to search for static libraries ++ continue ++ fi + fi +- fi +- +- # Make sure dlfiles contains only unique files that won't be dlpreopened +- old_dlfiles="$dlfiles" +- dlfiles= +- for lib in $old_dlfiles; do +- case " $dlprefiles $dlfiles " in +- *" $lib "*) ;; +- *) dlfiles="$dlfiles $lib" ;; +- esac +- done +- +- # Make sure dlprefiles contains only unique files +- old_dlprefiles="$dlprefiles" +- dlprefiles= +- for lib in $old_dlprefiles; do +- case "$dlprefiles " in +- *" $lib "*) ;; +- *) dlprefiles="$dlprefiles $lib" ;; +- esac +- done + +- if test "$build_libtool_libs" = yes; then +- if test -n "$rpath"; then ++ link_static=no # Whether the deplib will be linked statically ++ use_static_libs=$prefer_static_libs ++ if test "$use_static_libs" = built && test "$installed" = yes; then ++ use_static_libs=no ++ fi ++ if test -n "$library_names" && ++ { test "$use_static_libs" = no || test -z "$old_library"; }; then + case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) +- # these systems don't actually have a c library (as such)! +- ;; +- *-*-rhapsody* | *-*-darwin1.[012]) +- # Rhapsody C library is in the System framework +- deplibs="$deplibs -framework System" +- ;; +- *-*-netbsd*) +- # Don't link with libc until the a.out ld.so is fixed. +- ;; +- *-*-openbsd*) +- # Do not include libc due to us having libc/libc_r. ++ *cygwin* | *mingw* | *cegcc*) ++ # No point in relinking DLLs because paths are not encoded ++ func_append notinst_deplibs " $lib" ++ need_relink=no + ;; + *) +- # Add libc to deplibs on all other systems if necessary. +- if test $build_libtool_need_lc = "yes"; then +- deplibs="$deplibs -lc" ++ if test "$installed" = no; then ++ func_append notinst_deplibs " $lib" ++ need_relink=yes + fi + ;; + esac +- fi ++ # This is a shared library + +- # Transform deplibs into only deplibs that can be linked in shared. +- name_save=$name +- libname_save=$libname +- release_save=$release +- versuffix_save=$versuffix +- major_save=$major +- # I'm not sure if I'm treating the release correctly. I think +- # release should show up in the -l (ie -lgmp5) so we don't want to +- # add it in twice. Is that correct? +- release="" +- versuffix="" +- major="" +- newdeplibs= +- droppeddeps=no +- case $deplibs_check_method in +- pass_all) +- # Don't check for shared/static. Everything works. +- # This might be a little naive. We might want to check +- # whether the library exists or not. But this is on +- # osf3 & osf4 and I'm not really sure... Just +- # implementing what was already the behaviour. +- newdeplibs=$deplibs +- ;; +- test_compile) +- # This code stresses the "libraries are programs" paradigm to its +- # limits. Maybe even breaks it. We compile a program, linking it +- # against the deplibs as a proxy for the library. Then we can check +- # whether they linked in statically or dynamically with ldd. +- $rm conftest.c +- cat > conftest.c <<EOF +- int main() { return 0; } +-EOF +- $rm conftest +- $CC -o conftest conftest.c $deplibs +- if test $? -eq 0 ; then +- ldd_output=`ldd conftest` +- for i in $deplibs; do +- name="`expr $i : '-l\(.*\)'`" +- # If $name is empty we are operating on a -L argument. +- if test -n "$name" && test "$name" != "0"; then +- libname=`eval \\$echo \"$libname_spec\"` +- deplib_matches=`eval \\$echo \"$library_names_spec\"` +- set dummy $deplib_matches +- deplib_match=$2 +- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then +- newdeplibs="$newdeplibs $i" +- else +- droppeddeps=yes +- echo +- echo "*** Warning: This library needs some functionality provided by $i." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have." +- fi ++ # Warn about portability, can't link against -module's on some ++ # systems (darwin). Don't bleat about dlopened modules though! ++ dlopenmodule="" ++ for dlpremoduletest in $dlprefiles; do ++ if test "X$dlpremoduletest" = "X$lib"; then ++ dlopenmodule="$dlpremoduletest" ++ break ++ fi ++ done ++ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then ++ echo ++ if test "$linkmode" = prog; then ++ $ECHO "*** Warning: Linking the executable $output against the loadable module" ++ else ++ $ECHO "*** Warning: Linking the shared library $output against the loadable module" ++ fi ++ $ECHO "*** $linklib is not portable!" ++ fi ++ if test "$linkmode" = lib && ++ test "$hardcode_into_libs" = yes; then ++ # Hardcode the library path. ++ # Skip directories that are in the system default run-time ++ # search path. ++ case " $sys_lib_dlsearch_path " in ++ *" $absdir "*) ;; ++ *) ++ case "$compile_rpath " in ++ *" $absdir "*) ;; ++ *) func_append compile_rpath " $absdir" ;; ++ esac ++ ;; ++ esac ++ case " $sys_lib_dlsearch_path " in ++ *" $libdir "*) ;; ++ *) ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) func_append finalize_rpath " $libdir" ;; ++ esac ++ ;; ++ esac ++ fi ++ ++ if test -n "$old_archive_from_expsyms_cmds"; then ++ # figure out the soname ++ set dummy $library_names ++ shift ++ realname="$1" ++ shift ++ libname=`eval "\\$ECHO \"$libname_spec\""` ++ # use dlname if we got it. it's perfectly good, no? ++ if test -n "$dlname"; then ++ soname="$dlname" ++ elif test -n "$soname_spec"; then ++ # bleh windows ++ case $host in ++ *cygwin* | mingw* | *cegcc*) ++ func_arith $current - $age ++ major=$func_arith_result ++ versuffix="-$major" ++ ;; ++ esac ++ eval soname=\"$soname_spec\" ++ else ++ soname="$realname" ++ fi ++ ++ # Make a new name for the extract_expsyms_cmds to use ++ soroot="$soname" ++ func_basename "$soroot" ++ soname="$func_basename_result" ++ func_stripname 'lib' '.dll' "$soname" ++ newlib=libimp-$func_stripname_result.a ++ ++ # If the library has no export list, then create one now ++ if test -f "$output_objdir/$soname-def"; then : ++ else ++ func_verbose "extracting exported symbol list from \`$soname'" ++ func_execute_cmds "$extract_expsyms_cmds" 'exit $?' ++ fi ++ ++ # Create $newlib ++ if test -f "$output_objdir/$newlib"; then :; else ++ func_verbose "generating import library for \`$soname'" ++ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' ++ fi ++ # make sure the library variables are pointing to the new library ++ dir=$output_objdir ++ linklib=$newlib ++ fi # test -n "$old_archive_from_expsyms_cmds" ++ ++ if test "$linkmode" = prog || test "$opt_mode" != relink; then ++ add_shlibpath= ++ add_dir= ++ add= ++ lib_linked=yes ++ case $hardcode_action in ++ immediate | unsupported) ++ if test "$hardcode_direct" = no; then ++ add="$dir/$linklib" ++ case $host in ++ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; ++ *-*-sysv4*uw2*) add_dir="-L$dir" ;; ++ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ ++ *-*-unixware7*) add_dir="-L$dir" ;; ++ *-*-darwin* ) ++ # if the lib is a (non-dlopened) module then we can not ++ # link against it, someone is ignoring the earlier warnings ++ if /usr/bin/file -L $add 2> /dev/null | ++ $GREP ": [^:]* bundle" >/dev/null ; then ++ if test "X$dlopenmodule" != "X$lib"; then ++ $ECHO "*** Warning: lib $linklib is a module, not a shared library" ++ if test -z "$old_library" ; then ++ echo ++ echo "*** And there doesn't seem to be a static archive available" ++ echo "*** The link will probably fail, sorry" ++ else ++ add="$dir/$old_library" ++ fi ++ elif test -n "$old_library"; then ++ add="$dir/$old_library" ++ fi ++ fi ++ esac ++ elif test "$hardcode_minus_L" = no; then ++ case $host in ++ *-*-sunos*) add_shlibpath="$dir" ;; ++ esac ++ add_dir="-L$dir" ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = no; then ++ add_shlibpath="$dir" ++ add="-l$name" + else +- newdeplibs="$newdeplibs $i" ++ lib_linked=no + fi +- done +- else +- # Error occured in the first compile. Let's try to salvage the situation: +- # Compile a seperate program for each library. +- for i in $deplibs; do +- name="`expr $i : '-l\(.*\)'`" +- # If $name is empty we are operating on a -L argument. +- if test -n "$name" && test "$name" != "0"; then +- $rm conftest +- $CC -o conftest conftest.c $i +- # Did it work? +- if test $? -eq 0 ; then +- ldd_output=`ldd conftest` +- libname=`eval \\$echo \"$libname_spec\"` +- deplib_matches=`eval \\$echo \"$library_names_spec\"` +- set dummy $deplib_matches +- deplib_match=$2 +- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then +- newdeplibs="$newdeplibs $i" +- else +- droppeddeps=yes +- echo +- echo "*** Warning: This library needs some functionality provided by $i." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have." +- fi +- else +- droppeddeps=yes +- echo +- echo "*** Warning! Library $i is needed by this library but I was not able to" +- echo "*** make it link in! You will probably need to install it or some" +- echo "*** library that it depends on before this library will be fully" +- echo "*** functional. Installing it before continuing would be even better." ++ ;; ++ relink) ++ if test "$hardcode_direct" = yes && ++ test "$hardcode_direct_absolute" = no; then ++ add="$dir/$linklib" ++ elif test "$hardcode_minus_L" = yes; then ++ add_dir="-L$dir" ++ # Try looking first in the location we're being installed to. ++ if test -n "$inst_prefix_dir"; then ++ case $libdir in ++ [\\/]*) ++ func_append add_dir " -L$inst_prefix_dir$libdir" ++ ;; ++ esac + fi ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = yes; then ++ add_shlibpath="$dir" ++ add="-l$name" + else +- newdeplibs="$newdeplibs $i" +- fi +- done +- fi +- ;; +- file_magic*) +- set dummy $deplibs_check_method +- file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` +- for a_deplib in $deplibs; do +- name="`expr $a_deplib : '-l\(.*\)'`" +- # If $name is empty we are operating on a -L argument. +- if test -n "$name" && test "$name" != "0"; then +- libname=`eval \\$echo \"$libname_spec\"` +- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do +- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` +- for potent_lib in $potential_libs; do +- # Follow soft links. +- if ls -lLd "$potent_lib" 2>/dev/null \ +- | grep " -> " >/dev/null; then +- continue +- fi +- # The statement above tries to avoid entering an +- # endless loop below, in case of cyclic links. +- # We might still enter an endless loop, since a link +- # loop can be closed while we follow links, +- # but so what? +- potlib="$potent_lib" +- while test -h "$potlib" 2>/dev/null; do +- potliblink=`ls -ld $potlib | sed 's/.* -> //'` +- case $potliblink in +- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; +- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; +- esac +- done +- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ +- | sed 10q \ +- | egrep "$file_magic_regex" > /dev/null; then +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- break 2 +- fi +- done +- done +- if test -n "$a_deplib" ; then +- droppeddeps=yes +- echo +- echo "*** Warning: This library needs some functionality provided by $a_deplib." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have." +- fi +- else +- # Add a -L argument. +- newdeplibs="$newdeplibs $a_deplib" +- fi +- done # Gone through all deplibs. +- ;; +- match_pattern*) +- set dummy $deplibs_check_method +- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` +- for a_deplib in $deplibs; do +- name="`expr $a_deplib : '-l\(.*\)'`" +- # If $name is empty we are operating on a -L argument. +- if test -n "$name" && test "$name" != "0"; then +- libname=`eval \\$echo \"$libname_spec\"` +- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do +- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` +- for potent_lib in $potential_libs; do +- if eval echo \"$potent_lib\" 2>/dev/null \ +- | sed 10q \ +- | egrep "$match_pattern_regex" > /dev/null; then +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- break 2 +- fi +- done +- done +- if test -n "$a_deplib" ; then +- droppeddeps=yes +- echo +- echo "*** Warning: This library needs some functionality provided by $a_deplib." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have." ++ lib_linked=no + fi +- else +- # Add a -L argument. +- newdeplibs="$newdeplibs $a_deplib" ++ ;; ++ *) lib_linked=no ;; ++ esac ++ ++ if test "$lib_linked" != yes; then ++ func_fatal_configuration "unsupported hardcode properties" + fi +- done # Gone through all deplibs. +- ;; +- none | unknown | *) +- newdeplibs="" +- if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ +- -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | +- grep . >/dev/null; then +- echo +- if test "X$deplibs_check_method" = "Xnone"; then +- echo "*** Warning: inter-library dependencies are not supported in this platform." ++ ++ if test -n "$add_shlibpath"; then ++ case :$compile_shlibpath: in ++ *":$add_shlibpath:"*) ;; ++ *) func_append compile_shlibpath "$add_shlibpath:" ;; ++ esac ++ fi ++ if test "$linkmode" = prog; then ++ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" ++ test -n "$add" && compile_deplibs="$add $compile_deplibs" + else +- echo "*** Warning: inter-library dependencies are not known to be supported." ++ test -n "$add_dir" && deplibs="$add_dir $deplibs" ++ test -n "$add" && deplibs="$add $deplibs" ++ if test "$hardcode_direct" != yes && ++ test "$hardcode_minus_L" != yes && ++ test "$hardcode_shlibpath_var" = yes; then ++ case :$finalize_shlibpath: in ++ *":$libdir:"*) ;; ++ *) func_append finalize_shlibpath "$libdir:" ;; ++ esac ++ fi + fi +- echo "*** All declared inter-library dependencies are being dropped." +- droppeddeps=yes + fi +- ;; +- esac +- versuffix=$versuffix_save +- major=$major_save +- release=$release_save +- libname=$libname_save +- name=$name_save +- +- case $host in +- *-*-rhapsody* | *-*-darwin1.[012]) +- # On Rhapsody replace the C library is the System framework +- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` +- ;; +- esac + +- if test "$droppeddeps" = yes; then +- if test "$module" = yes; then +- echo +- echo "*** Warning: libtool could not satisfy all declared inter-library" +- echo "*** dependencies of module $libname. Therefore, libtool will create" +- echo "*** a static module, that should work as long as the dlopening" +- echo "*** application is linked with the -dlopen flag." +- if test -z "$global_symbol_pipe"; then +- echo +- echo "*** However, this would only work if libtool was able to extract symbol" +- echo "*** lists from a program, using \`nm' or equivalent, but libtool could" +- echo "*** not find such a program. So, this module is probably useless." +- echo "*** \`nm' from GNU binutils and a full rebuild may help." ++ if test "$linkmode" = prog || test "$opt_mode" = relink; then ++ add_shlibpath= ++ add_dir= ++ add= ++ # Finalize command for both is simple: just hardcode it. ++ if test "$hardcode_direct" = yes && ++ test "$hardcode_direct_absolute" = no; then ++ add="$libdir/$linklib" ++ elif test "$hardcode_minus_L" = yes; then ++ add_dir="-L$libdir" ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = yes; then ++ case :$finalize_shlibpath: in ++ *":$libdir:"*) ;; ++ *) func_append finalize_shlibpath "$libdir:" ;; ++ esac ++ add="-l$name" ++ elif test "$hardcode_automatic" = yes; then ++ if test -n "$inst_prefix_dir" && ++ test -f "$inst_prefix_dir$libdir/$linklib" ; then ++ add="$inst_prefix_dir$libdir/$linklib" ++ else ++ add="$libdir/$linklib" ++ fi ++ else ++ # We cannot seem to hardcode it, guess we'll fake it. ++ add_dir="-L$libdir" ++ # Try looking first in the location we're being installed to. ++ if test -n "$inst_prefix_dir"; then ++ case $libdir in ++ [\\/]*) ++ func_append add_dir " -L$inst_prefix_dir$libdir" ++ ;; ++ esac ++ fi ++ add="-l$name" + fi +- if test "$build_old_libs" = no; then +- oldlibs="$output_objdir/$libname.$libext" +- build_libtool_libs=module +- build_old_libs=yes ++ ++ if test "$linkmode" = prog; then ++ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" ++ test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else +- build_libtool_libs=no ++ test -n "$add_dir" && deplibs="$add_dir $deplibs" ++ test -n "$add" && deplibs="$add $deplibs" + fi ++ fi ++ elif test "$linkmode" = prog; then ++ # Here we assume that one of hardcode_direct or hardcode_minus_L ++ # is not unsupported. This is valid on all known static and ++ # shared platforms. ++ if test "$hardcode_direct" != unsupported; then ++ test -n "$old_library" && linklib="$old_library" ++ compile_deplibs="$dir/$linklib $compile_deplibs" ++ finalize_deplibs="$dir/$linklib $finalize_deplibs" + else +- echo "*** The inter-library dependencies that have been dropped here will be" +- echo "*** automatically added whenever a program is linked with this library" +- echo "*** or is declared to -dlopen it." ++ compile_deplibs="-l$name -L$dir $compile_deplibs" ++ finalize_deplibs="-l$name -L$dir $finalize_deplibs" ++ fi ++ elif test "$build_libtool_libs" = yes; then ++ # Not a shared library ++ if test "$deplibs_check_method" != pass_all; then ++ # We're trying link a shared library against a static one ++ # but the system doesn't support it. + +- if test $allow_undefined = no; then +- echo +- echo "*** Since this library must not contain undefined symbols," +- echo "*** because either the platform does not support them or" +- echo "*** it was explicitly requested with -no-undefined," +- echo "*** libtool will only create a static version of it." ++ # Just print a warning and add the library to dependency_libs so ++ # that the program can be linked against the static library. ++ echo ++ $ECHO "*** Warning: This system can not link to static lib archive $lib." ++ echo "*** I have the capability to make that library automatically link in when" ++ echo "*** you link to this library. But I can only do this if you have a" ++ echo "*** shared version of the library, which you do not appear to have." ++ if test "$module" = yes; then ++ echo "*** But as you try to build a module library, libtool will still create " ++ echo "*** a static module, that should work as long as the dlopening application" ++ echo "*** is linked with the -dlopen flag to resolve symbols at runtime." ++ if test -z "$global_symbol_pipe"; then ++ echo ++ echo "*** However, this would only work if libtool was able to extract symbol" ++ echo "*** lists from a program, using \`nm' or equivalent, but libtool could" ++ echo "*** not find such a program. So, this module is probably useless." ++ echo "*** \`nm' from GNU binutils and a full rebuild may help." ++ fi + if test "$build_old_libs" = no; then +- oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi ++ else ++ deplibs="$dir/$old_library $deplibs" ++ link_static=yes + fi +- fi +- # Done checking deplibs! +- deplibs=$newdeplibs +- fi ++ fi # link shared/static library? + +- # All the library-specific variables (install_libdir is set above). +- library_names= +- old_library= +- dlname= ++ if test "$linkmode" = lib; then ++ if test -n "$dependency_libs" && ++ { test "$hardcode_into_libs" != yes || ++ test "$build_old_libs" = yes || ++ test "$link_static" = yes; }; then ++ # Extract -R from dependency_libs ++ temp_deplibs= ++ for libdir in $dependency_libs; do ++ case $libdir in ++ -R*) func_stripname '-R' '' "$libdir" ++ temp_xrpath=$func_stripname_result ++ case " $xrpath " in ++ *" $temp_xrpath "*) ;; ++ *) func_append xrpath " $temp_xrpath";; ++ esac;; ++ *) func_append temp_deplibs " $libdir";; ++ esac ++ done ++ dependency_libs="$temp_deplibs" ++ fi + +- # Test again, we may have decided not to build it any more +- if test "$build_libtool_libs" = yes; then +- if test $hardcode_into_libs = yes; then +- # Hardcode the library paths +- hardcode_libdirs= +- dep_rpath= +- rpath="$finalize_rpath" +- test "$mode" != relink && rpath="$compile_rpath$rpath" +- for libdir in $rpath; do +- if test -n "$hardcode_libdir_flag_spec"; then +- if test -n "$hardcode_libdir_separator"; then +- if test -z "$hardcode_libdirs"; then +- hardcode_libdirs="$libdir" ++ func_append newlib_search_path " $absdir" ++ # Link against this library ++ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" ++ # ... and its dependency_libs ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ newdependency_libs="$deplib $newdependency_libs" ++ case $deplib in ++ -L*) func_stripname '-L' '' "$deplib" ++ func_resolve_sysroot "$func_stripname_result";; ++ *) func_resolve_sysroot "$deplib" ;; ++ esac ++ if $opt_preserve_dup_deps ; then ++ case "$tmp_libs " in ++ *" $func_resolve_sysroot_result "*) ++ func_append specialdeplibs " $func_resolve_sysroot_result" ;; ++ esac ++ fi ++ func_append tmp_libs " $func_resolve_sysroot_result" ++ done ++ ++ if test "$link_all_deplibs" != no; then ++ # Add the search paths of all dependency libraries ++ for deplib in $dependency_libs; do ++ path= ++ case $deplib in ++ -L*) path="$deplib" ;; ++ *.la) ++ func_resolve_sysroot "$deplib" ++ deplib=$func_resolve_sysroot_result ++ func_dirname "$deplib" "" "." ++ dir=$func_dirname_result ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; ++ *) ++ absdir=`cd "$dir" && pwd` ++ if test -z "$absdir"; then ++ func_warning "cannot determine absolute directory name of \`$dir'" ++ absdir="$dir" ++ fi ++ ;; ++ esac ++ if $GREP "^installed=no" $deplib > /dev/null; then ++ case $host in ++ *-*-darwin*) ++ depdepl= ++ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` ++ if test -n "$deplibrary_names" ; then ++ for tmp in $deplibrary_names ; do ++ depdepl=$tmp ++ done ++ if test -f "$absdir/$objdir/$depdepl" ; then ++ depdepl="$absdir/$objdir/$depdepl" ++ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` ++ if test -z "$darwin_install_name"; then ++ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` ++ fi ++ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" ++ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" ++ path= ++ fi ++ fi ++ ;; ++ *) ++ path="-L$absdir/$objdir" ++ ;; ++ esac + else +- # Just accumulate the unique libdirs. +- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in +- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) +- ;; +- *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" +- ;; +- esac ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$deplib' is not a valid libtool archive" ++ test "$absdir" != "$libdir" && \ ++ func_warning "\`$deplib' seems to be moved" ++ ++ path="-L$absdir" + fi +- else +- eval flag=\"$hardcode_libdir_flag_spec\" +- dep_rpath="$dep_rpath $flag" +- fi +- elif test -n "$runpath_var"; then +- case "$perm_rpath " in +- *" $libdir "*) ;; +- *) perm_rpath="$perm_rpath $libdir" ;; ++ ;; ++ esac ++ case " $deplibs " in ++ *" $path "*) ;; ++ *) deplibs="$path $deplibs" ;; ++ esac ++ done ++ fi # link_all_deplibs != no ++ fi # linkmode = lib ++ done # for deplib in $libs ++ if test "$pass" = link; then ++ if test "$linkmode" = "prog"; then ++ compile_deplibs="$new_inherited_linker_flags $compile_deplibs" ++ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" ++ else ++ compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ++ fi ++ fi ++ dependency_libs="$newdependency_libs" ++ if test "$pass" = dlpreopen; then ++ # Link the dlpreopened libraries before other libraries ++ for deplib in $save_deplibs; do ++ deplibs="$deplib $deplibs" ++ done ++ fi ++ if test "$pass" != dlopen; then ++ if test "$pass" != conv; then ++ # Make sure lib_search_path contains only unique directories. ++ lib_search_path= ++ for dir in $newlib_search_path; do ++ case "$lib_search_path " in ++ *" $dir "*) ;; ++ *) func_append lib_search_path " $dir" ;; ++ esac ++ done ++ newlib_search_path= ++ fi ++ ++ if test "$linkmode,$pass" != "prog,link"; then ++ vars="deplibs" ++ else ++ vars="compile_deplibs finalize_deplibs" ++ fi ++ for var in $vars dependency_libs; do ++ # Add libraries to $var in reverse order ++ eval tmp_libs=\"\$$var\" ++ new_libs= ++ for deplib in $tmp_libs; do ++ # FIXME: Pedantically, this is the right thing to do, so ++ # that some nasty dependency loop isn't accidentally ++ # broken: ++ #new_libs="$deplib $new_libs" ++ # Pragmatically, this seems to cause very few problems in ++ # practice: ++ case $deplib in ++ -L*) new_libs="$deplib $new_libs" ;; ++ -R*) ;; ++ *) ++ # And here is the reason: when a library appears more ++ # than once as an explicit dependence of a library, or ++ # is implicitly linked in more than once by the ++ # compiler, it is considered special, and multiple ++ # occurrences thereof are not removed. Compare this ++ # with having the same library being listed as a ++ # dependency of multiple other libraries: in this case, ++ # we know (pedantically, we assume) the library does not ++ # need to be listed more than once, so we keep only the ++ # last copy. This is not always right, but it is rare ++ # enough that we require users that really mean to play ++ # such unportable linking tricks to link the library ++ # using -Wl,-lname, so that libtool does not consider it ++ # for duplicate removal. ++ case " $specialdeplibs " in ++ *" $deplib "*) new_libs="$deplib $new_libs" ;; ++ *) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$deplib $new_libs" ;; ++ esac ++ ;; ++ esac ++ ;; ++ esac ++ done ++ tmp_libs= ++ for deplib in $new_libs; do ++ case $deplib in ++ -L*) ++ case " $tmp_libs " in ++ *" $deplib "*) ;; ++ *) func_append tmp_libs " $deplib" ;; + esac +- fi ++ ;; ++ *) func_append tmp_libs " $deplib" ;; ++ esac + done +- # Substitute the hardcoded libdirs into the rpath. +- if test -n "$hardcode_libdir_separator" && +- test -n "$hardcode_libdirs"; then +- libdir="$hardcode_libdirs" +- eval dep_rpath=\"$hardcode_libdir_flag_spec\" +- fi +- if test -n "$runpath_var" && test -n "$perm_rpath"; then +- # We should set the runpath_var. +- rpath= +- for dir in $perm_rpath; do +- rpath="$rpath$dir:" +- done +- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" +- fi +- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" ++ eval $var=\"$tmp_libs\" ++ done # for var ++ fi ++ # Last step: remove runtime libs from dependency_libs ++ # (they stay in deplibs) ++ tmp_libs= ++ for i in $dependency_libs ; do ++ case " $predeps $postdeps $compiler_lib_search_path " in ++ *" $i "*) ++ i="" ++ ;; ++ esac ++ if test -n "$i" ; then ++ func_append tmp_libs " $i" + fi ++ done ++ dependency_libs=$tmp_libs ++ done # for pass ++ if test "$linkmode" = prog; then ++ dlfiles="$newdlfiles" ++ fi ++ if test "$linkmode" = prog || test "$linkmode" = lib; then ++ dlprefiles="$newdlprefiles" ++ fi + +- shlibpath="$finalize_shlibpath" +- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" +- if test -n "$shlibpath"; then +- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" +- fi ++ case $linkmode in ++ oldlib) ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ func_warning "\`-dlopen' is ignored for archives" ++ fi + +- # Get the real and link names of the library. +- eval library_names=\"$library_names_spec\" +- set dummy $library_names +- realname="$2" +- shift; shift ++ case " $deplibs" in ++ *\ -l* | *\ -L*) ++ func_warning "\`-l' and \`-L' are ignored for archives" ;; ++ esac + +- if test -n "$soname_spec"; then +- eval soname=\"$soname_spec\" +- else +- soname="$realname" +- fi +- test -z "$dlname" && dlname=$soname ++ test -n "$rpath" && \ ++ func_warning "\`-rpath' is ignored for archives" + +- lib="$output_objdir/$realname" +- for link +- do +- linknames="$linknames $link" +- done ++ test -n "$xrpath" && \ ++ func_warning "\`-R' is ignored for archives" + +- # Ensure that we have .o objects for linkers which dislike .lo +- # (e.g. aix) in case we are running --disable-static +- for obj in $libobjs; do +- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$obj"; then +- xdir="." +- else +- xdir="$xdir" +- fi +- baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` +- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` +- if test ! -f $xdir/$oldobj; then +- $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" +- $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? +- fi +- done ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info/-version-number' is ignored for archives" + +- # Use standard objects if they are pic +- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for archives" + +- # Prepare the list of exported symbols +- if test -z "$export_symbols"; then +- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then +- $show "generating symbol list for \`$libname.la'" +- export_symbols="$output_objdir/$libname.exp" +- $run $rm $export_symbols +- eval cmds=\"$export_symbols_cmds\" +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- if test -n "$export_symbols_regex"; then +- $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" +- $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' +- $show "$mv \"${export_symbols}T\" \"$export_symbols\"" +- $run eval '$mv "${export_symbols}T" "$export_symbols"' +- fi +- fi ++ test -n "$export_symbols$export_symbols_regex" && \ ++ func_warning "\`-export-symbols' is ignored for archives" ++ ++ # Now set the variables for building old libraries. ++ build_libtool_libs=no ++ oldlibs="$output" ++ func_append objs "$old_deplibs" ++ ;; ++ ++ lib) ++ # Make sure we only generate libraries of the form `libNAME.la'. ++ case $outputname in ++ lib*) ++ func_stripname 'lib' '.la' "$outputname" ++ name=$func_stripname_result ++ eval shared_ext=\"$shrext_cmds\" ++ eval libname=\"$libname_spec\" ++ ;; ++ *) ++ test "$module" = no && \ ++ func_fatal_help "libtool library \`$output' must begin with \`lib'" ++ ++ if test "$need_lib_prefix" != no; then ++ # Add the "lib" prefix for modules if required ++ func_stripname '' '.la' "$outputname" ++ name=$func_stripname_result ++ eval shared_ext=\"$shrext_cmds\" ++ eval libname=\"$libname_spec\" ++ else ++ func_stripname '' '.la' "$outputname" ++ libname=$func_stripname_result + fi ++ ;; ++ esac + +- if test -n "$export_symbols" && test -n "$include_expsyms"; then +- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' ++ if test -n "$objs"; then ++ if test "$deplibs_check_method" != pass_all; then ++ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" ++ else ++ echo ++ $ECHO "*** Warning: Linking the shared library $output against the non-libtool" ++ $ECHO "*** objects $objs is not portable!" ++ func_append libobjs " $objs" + fi ++ fi + +- if test -n "$convenience"; then +- if test -n "$whole_archive_flag_spec"; then +- eval libobjs=\"\$libobjs $whole_archive_flag_spec\" +- else +- gentop="$output_objdir/${outputname}x" +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "mkdir $gentop" +- $run mkdir "$gentop" +- status=$? +- if test $status -ne 0 && test ! -d "$gentop"; then +- exit $status +- fi +- generated="$generated $gentop" +- +- for xlib in $convenience; do +- # Extract the objects. +- case $xlib in +- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; +- *) xabs=`pwd`"/$xlib" ;; +- esac +- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` +- xdir="$gentop/$xlib" ++ test "$dlself" != no && \ ++ func_warning "\`-dlopen self' is ignored for libtool libraries" + +- $show "${rm}r $xdir" +- $run ${rm}r "$xdir" +- $show "mkdir $xdir" +- $run mkdir "$xdir" +- status=$? +- if test $status -ne 0 && test ! -d "$xdir"; then +- exit $status +- fi +- $show "(cd $xdir && $AR x $xabs)" +- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? ++ set dummy $rpath ++ shift ++ test "$#" -gt 1 && \ ++ func_warning "ignoring multiple \`-rpath's for a libtool library" + +- libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` +- done +- fi +- fi ++ install_libdir="$1" + +- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then +- eval flag=\"$thread_safe_flag_spec\" +- linker_flags="$linker_flags $flag" ++ oldlibs= ++ if test -z "$rpath"; then ++ if test "$build_libtool_libs" = yes; then ++ # Building a libtool convenience library. ++ # Some compilers have problems with a `.al' extension so ++ # convenience libraries should have the same extension an ++ # archive normally would. ++ oldlibs="$output_objdir/$libname.$libext $oldlibs" ++ build_libtool_libs=convenience ++ build_old_libs=yes + fi + +- # Make a backup of the uninstalled library when relinking +- if test "$mode" = relink; then +- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? +- fi ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + +- # Do each of the archive commands. +- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then +- eval cmds=\"$archive_expsym_cmds\" +- else +- eval cmds=\"$archive_cmds\" +- fi +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for convenience libraries" ++ else ++ ++ # Parse the version information argument. ++ save_ifs="$IFS"; IFS=':' ++ set dummy $vinfo 0 0 0 ++ shift + IFS="$save_ifs" + +- # Restore the uninstalled library and exit +- if test "$mode" = relink; then +- $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? +- exit 0 +- fi ++ test -n "$7" && \ ++ func_fatal_help "too many parameters to \`-version-info'" + +- # Create links to the real library. +- for linkname in $linknames; do +- if test "$realname" != "$linkname"; then +- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" +- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? +- fi +- done ++ # convert absolute version numbers to libtool ages ++ # this retains compatibility with .la files and attempts ++ # to make the code below a bit more comprehensible ++ ++ case $vinfo_number in ++ yes) ++ number_major="$1" ++ number_minor="$2" ++ number_revision="$3" ++ # ++ # There are really only two kinds -- those that ++ # use the current revision as the major version ++ # and those that subtract age and use age as ++ # a minor version. But, then there is irix ++ # which has an extra 1 added just for fun ++ # ++ case $version_type in ++ darwin|linux|osf|windows|none) ++ func_arith $number_major + $number_minor ++ current=$func_arith_result ++ age="$number_minor" ++ revision="$number_revision" ++ ;; ++ freebsd-aout|freebsd-elf|qnx|sunos) ++ current="$number_major" ++ revision="$number_minor" ++ age="0" ++ ;; ++ irix|nonstopux) ++ func_arith $number_major + $number_minor ++ current=$func_arith_result ++ age="$number_minor" ++ revision="$number_minor" ++ lt_irix_increment=no ++ ;; ++ *) ++ func_fatal_configuration "$modename: unknown library version type \`$version_type'" ++ ;; ++ esac ++ ;; ++ no) ++ current="$1" ++ revision="$2" ++ age="$3" ++ ;; ++ esac + +- # If -module or -export-dynamic was specified, set the dlname. +- if test "$module" = yes || test "$export_dynamic" = yes; then +- # On all known operating systems, these are identical. +- dlname="$soname" +- fi +- fi +- ;; ++ # Check that each of the things are valid numbers. ++ case $current in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ func_error "CURRENT \`$current' must be a nonnegative integer" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ ;; ++ esac + +- obj) +- if test -n "$deplibs"; then +- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 +- fi ++ case $revision in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ func_error "REVISION \`$revision' must be a nonnegative integer" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ ;; ++ esac + +- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then +- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 +- fi ++ case $age in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ func_error "AGE \`$age' must be a nonnegative integer" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ ;; ++ esac + +- if test -n "$rpath"; then +- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 +- fi ++ if test "$age" -gt "$current"; then ++ func_error "AGE \`$age' is greater than the current interface number \`$current'" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ fi + +- if test -n "$xrpath"; then +- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 +- fi ++ # Calculate the version variables. ++ major= ++ versuffix= ++ verstring= ++ case $version_type in ++ none) ;; + +- if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 +- fi ++ darwin) ++ # Like Linux, but with the current version available in ++ # verstring for coding it into the library header ++ func_arith $current - $age ++ major=.$func_arith_result ++ versuffix="$major.$age.$revision" ++ # Darwin ld doesn't like 0 for these options... ++ func_arith $current + 1 ++ minor_current=$func_arith_result ++ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" ++ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ++ ;; + +- if test -n "$release"; then +- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 +- fi ++ freebsd-aout) ++ major=".$current" ++ versuffix=".$current.$revision"; ++ ;; + +- case $output in +- *.lo) +- if test -n "$objs$old_deplibs"; then +- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 +- exit 1 +- fi +- libobj="$output" +- obj=`$echo "X$output" | $Xsed -e "$lo2o"` +- ;; +- *) +- libobj= +- obj="$output" +- ;; +- esac ++ freebsd-elf) ++ major=".$current" ++ versuffix=".$current" ++ ;; + +- # Delete the old objects. +- $run $rm $obj $libobj ++ irix | nonstopux) ++ if test "X$lt_irix_increment" = "Xno"; then ++ func_arith $current - $age ++ else ++ func_arith $current - $age + 1 ++ fi ++ major=$func_arith_result + +- # Objects from convenience libraries. This assumes +- # single-version convenience libraries. Whenever we create +- # different ones for PIC/non-PIC, this we'll have to duplicate +- # the extraction. +- reload_conv_objs= +- gentop= +- # reload_cmds runs $LD directly, so let us get rid of +- # -Wl from whole_archive_flag_spec +- wl= ++ case $version_type in ++ nonstopux) verstring_prefix=nonstopux ;; ++ *) verstring_prefix=sgi ;; ++ esac ++ verstring="$verstring_prefix$major.$revision" + +- if test -n "$convenience"; then +- if test -n "$whole_archive_flag_spec"; then +- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" +- else +- gentop="$output_objdir/${obj}x" +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "mkdir $gentop" +- $run mkdir "$gentop" +- status=$? +- if test $status -ne 0 && test ! -d "$gentop"; then +- exit $status +- fi +- generated="$generated $gentop" +- +- for xlib in $convenience; do +- # Extract the objects. +- case $xlib in +- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; +- *) xabs=`pwd`"/$xlib" ;; +- esac +- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` +- xdir="$gentop/$xlib" ++ # Add in all the interfaces that we are compatible with. ++ loop=$revision ++ while test "$loop" -ne 0; do ++ func_arith $revision - $loop ++ iface=$func_arith_result ++ func_arith $loop - 1 ++ loop=$func_arith_result ++ verstring="$verstring_prefix$major.$iface:$verstring" ++ done + +- $show "${rm}r $xdir" +- $run ${rm}r "$xdir" +- $show "mkdir $xdir" +- $run mkdir "$xdir" +- status=$? +- if test $status -ne 0 && test ! -d "$xdir"; then +- exit $status +- fi +- $show "(cd $xdir && $AR x $xabs)" +- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? ++ # Before this point, $major must not contain `.'. ++ major=.$major ++ versuffix="$major.$revision" ++ ;; ++ ++ linux) ++ func_arith $current - $age ++ major=.$func_arith_result ++ versuffix="$major.$age.$revision" ++ ;; ++ ++ osf) ++ func_arith $current - $age ++ major=.$func_arith_result ++ versuffix=".$current.$age.$revision" ++ verstring="$current.$age.$revision" + +- reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` ++ # Add in all the interfaces that we are compatible with. ++ loop=$age ++ while test "$loop" -ne 0; do ++ func_arith $current - $loop ++ iface=$func_arith_result ++ func_arith $loop - 1 ++ loop=$func_arith_result ++ verstring="$verstring:${iface}.0" + done +- fi +- fi + +- # Create the old-style object. +- reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test ++ # Make executables depend on our current version. ++ func_append verstring ":${current}.0" ++ ;; + +- output="$obj" +- eval cmds=\"$reload_cmds\" +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" ++ qnx) ++ major=".$current" ++ versuffix=".$current" ++ ;; + +- # Exit if we aren't doing a library object file. +- if test -z "$libobj"; then +- if test -n "$gentop"; then +- $show "${rm}r $gentop" +- $run ${rm}r $gentop +- fi ++ sunos) ++ major=".$current" ++ versuffix=".$current.$revision" ++ ;; ++ ++ windows) ++ # Use '-' rather than '.', since we only want one ++ # extension on DOS 8.3 filesystems. ++ func_arith $current - $age ++ major=$func_arith_result ++ versuffix="-$major" ++ ;; + +- exit 0 +- fi ++ *) ++ func_fatal_configuration "unknown library version type \`$version_type'" ++ ;; ++ esac + +- if test "$build_libtool_libs" != yes; then +- if test -n "$gentop"; then +- $show "${rm}r $gentop" +- $run ${rm}r $gentop ++ # Clear the version info if we defaulted, and they specified a release. ++ if test -z "$vinfo" && test -n "$release"; then ++ major= ++ case $version_type in ++ darwin) ++ # we can't check for "0.0" in archive_cmds due to quoting ++ # problems, so we reset it completely ++ verstring= ++ ;; ++ *) ++ verstring="0.0" ++ ;; ++ esac ++ if test "$need_version" = no; then ++ versuffix= ++ else ++ versuffix=".0.0" ++ fi + fi + +- # Create an invalid libtool object if no PIC, so that we don't +- # accidentally link it into a program. +- $show "echo timestamp > $libobj" +- $run eval "echo timestamp > $libobj" || exit $? +- exit 0 +- fi ++ # Remove version info from name if versioning should be avoided ++ if test "$avoid_version" = yes && test "$need_version" = no; then ++ major= ++ versuffix= ++ verstring="" ++ fi + +- if test -n "$pic_flag" || test "$pic_mode" != default; then +- # Only do commands if we really have different PIC objects. +- reload_objs="$libobjs $reload_conv_objs" +- output="$libobj" +- eval cmds=\"$reload_cmds\" +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- else +- # Just create a symlink. +- $show $rm $libobj +- $run $rm $libobj +- xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$libobj"; then +- xdir="." ++ # Check to see if the archive will have undefined symbols. ++ if test "$allow_undefined" = yes; then ++ if test "$allow_undefined_flag" = unsupported; then ++ func_warning "undefined symbols not allowed in $host shared libraries" ++ build_libtool_libs=no ++ build_old_libs=yes ++ fi + else +- xdir="$xdir" ++ # Don't allow undefined symbols. ++ allow_undefined_flag="$no_undefined_flag" + fi +- baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` +- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` +- $show "(cd $xdir && $LN_S $oldobj $baseobj)" +- $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? +- fi + +- if test -n "$gentop"; then +- $show "${rm}r $gentop" +- $run ${rm}r $gentop + fi + +- exit 0 +- ;; +- +- prog) +- case $host in +- *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;; +- esac +- if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 ++ func_generate_dlsyms "$libname" "$libname" "yes" ++ func_append libobjs " $symfileobj" ++ test "X$libobjs" = "X " && libobjs= ++ ++ if test "$opt_mode" != relink; then ++ # Remove our outputs, but don't remove object files since they ++ # may have been created when compiling PIC objects. ++ removelist= ++ tempremovelist=`$ECHO "$output_objdir/*"` ++ for p in $tempremovelist; do ++ case $p in ++ *.$objext | *.gcno) ++ ;; ++ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) ++ if test "X$precious_files_regex" != "X"; then ++ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 ++ then ++ continue ++ fi ++ fi ++ func_append removelist " $p" ++ ;; ++ *) ;; ++ esac ++ done ++ test -n "$removelist" && \ ++ func_show_eval "${RM}r \$removelist" + fi + +- if test -n "$release"; then +- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 +- fi ++ # Now set the variables for building old libraries. ++ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then ++ func_append oldlibs " $output_objdir/$libname.$libext" + +- if test "$preload" = yes; then +- if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && +- test "$dlopen_self_static" = unknown; then +- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." +- fi ++ # Transform .lo files to .o files. ++ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + fi + +- case $host in +- *-*-rhapsody* | *-*-darwin1.[012]) +- # On Rhapsody replace the C library is the System framework +- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` +- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` +- ;; +- esac +- +- compile_command="$compile_command $compile_deplibs" +- finalize_command="$finalize_command $finalize_deplibs" ++ # Eliminate all temporary directories. ++ #for path in $notinst_path; do ++ # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` ++ # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` ++ # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` ++ #done + +- if test -n "$rpath$xrpath"; then ++ if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. +- for libdir in $rpath $xrpath; do +- # This is the magic to use -rpath. ++ temp_xrpath= ++ for libdir in $xrpath; do ++ func_replace_sysroot "$libdir" ++ func_append temp_xrpath " -R$func_replace_sysroot_result" + case "$finalize_rpath " in + *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" ;; ++ *) func_append finalize_rpath " $libdir" ;; + esac + done ++ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then ++ dependency_libs="$temp_xrpath $dependency_libs" ++ fi + fi + +- # Now hardcode the library paths +- rpath= +- hardcode_libdirs= +- for libdir in $compile_rpath $finalize_rpath; do +- if test -n "$hardcode_libdir_flag_spec"; then +- if test -n "$hardcode_libdir_separator"; then +- if test -z "$hardcode_libdirs"; then +- hardcode_libdirs="$libdir" ++ # Make sure dlfiles contains only unique files that won't be dlpreopened ++ old_dlfiles="$dlfiles" ++ dlfiles= ++ for lib in $old_dlfiles; do ++ case " $dlprefiles $dlfiles " in ++ *" $lib "*) ;; ++ *) func_append dlfiles " $lib" ;; ++ esac ++ done ++ ++ # Make sure dlprefiles contains only unique files ++ old_dlprefiles="$dlprefiles" ++ dlprefiles= ++ for lib in $old_dlprefiles; do ++ case "$dlprefiles " in ++ *" $lib "*) ;; ++ *) func_append dlprefiles " $lib" ;; ++ esac ++ done ++ ++ if test "$build_libtool_libs" = yes; then ++ if test -n "$rpath"; then ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) ++ # these systems don't actually have a c library (as such)! ++ ;; ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # Rhapsody C library is in the System framework ++ func_append deplibs " System.ltframework" ++ ;; ++ *-*-netbsd*) ++ # Don't link with libc until the a.out ld.so is fixed. ++ ;; ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc due to us having libc/libc_r. ++ ;; ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work ++ ;; ++ *) ++ # Add libc to deplibs on all other systems if necessary. ++ if test "$build_libtool_need_lc" = "yes"; then ++ func_append deplibs " -lc" ++ fi ++ ;; ++ esac ++ fi ++ ++ # Transform deplibs into only deplibs that can be linked in shared. ++ name_save=$name ++ libname_save=$libname ++ release_save=$release ++ versuffix_save=$versuffix ++ major_save=$major ++ # I'm not sure if I'm treating the release correctly. I think ++ # release should show up in the -l (ie -lgmp5) so we don't want to ++ # add it in twice. Is that correct? ++ release="" ++ versuffix="" ++ major="" ++ newdeplibs= ++ droppeddeps=no ++ case $deplibs_check_method in ++ pass_all) ++ # Don't check for shared/static. Everything works. ++ # This might be a little naive. We might want to check ++ # whether the library exists or not. But this is on ++ # osf3 & osf4 and I'm not really sure... Just ++ # implementing what was already the behavior. ++ newdeplibs=$deplibs ++ ;; ++ test_compile) ++ # This code stresses the "libraries are programs" paradigm to its ++ # limits. Maybe even breaks it. We compile a program, linking it ++ # against the deplibs as a proxy for the library. Then we can check ++ # whether they linked in statically or dynamically with ldd. ++ $opt_dry_run || $RM conftest.c ++ cat > conftest.c <<EOF ++ int main() { return 0; } ++EOF ++ $opt_dry_run || $RM conftest ++ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then ++ ldd_output=`ldd conftest` ++ for i in $deplibs; do ++ case $i in ++ -l*) ++ func_stripname -l '' "$i" ++ name=$func_stripname_result ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $i "*) ++ func_append newdeplibs " $i" ++ i="" ++ ;; ++ esac ++ fi ++ if test -n "$i" ; then ++ libname=`eval "\\$ECHO \"$libname_spec\""` ++ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` ++ set dummy $deplib_matches; shift ++ deplib_match=$1 ++ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then ++ func_append newdeplibs " $i" ++ else ++ droppeddeps=yes ++ echo ++ $ECHO "*** Warning: dynamic linker does not accept needed library $i." ++ echo "*** I have the capability to make that library automatically link in when" ++ echo "*** you link to this library. But I can only do this if you have a" ++ echo "*** shared version of the library, which I believe you do not have" ++ echo "*** because a test_compile did reveal that the linker did not use it for" ++ echo "*** its dynamic dependency list that programs get resolved with at runtime." ++ fi ++ fi ++ ;; ++ *) ++ func_append newdeplibs " $i" ++ ;; ++ esac ++ done ++ else ++ # Error occurred in the first compile. Let's try to salvage ++ # the situation: Compile a separate program for each library. ++ for i in $deplibs; do ++ case $i in ++ -l*) ++ func_stripname -l '' "$i" ++ name=$func_stripname_result ++ $opt_dry_run || $RM conftest ++ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then ++ ldd_output=`ldd conftest` ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $i "*) ++ func_append newdeplibs " $i" ++ i="" ++ ;; ++ esac ++ fi ++ if test -n "$i" ; then ++ libname=`eval "\\$ECHO \"$libname_spec\""` ++ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` ++ set dummy $deplib_matches; shift ++ deplib_match=$1 ++ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then ++ func_append newdeplibs " $i" ++ else ++ droppeddeps=yes ++ echo ++ $ECHO "*** Warning: dynamic linker does not accept needed library $i." ++ echo "*** I have the capability to make that library automatically link in when" ++ echo "*** you link to this library. But I can only do this if you have a" ++ echo "*** shared version of the library, which you do not appear to have" ++ echo "*** because a test_compile did reveal that the linker did not use this one" ++ echo "*** as a dynamic dependency that programs can get resolved with at runtime." ++ fi ++ fi ++ else ++ droppeddeps=yes ++ echo ++ $ECHO "*** Warning! Library $i is needed by this library but I was not able to" ++ echo "*** make it link in! You will probably need to install it or some" ++ echo "*** library that it depends on before this library will be fully" ++ echo "*** functional. Installing it before continuing would be even better." ++ fi ++ ;; ++ *) ++ func_append newdeplibs " $i" ++ ;; ++ esac ++ done ++ fi ++ ;; ++ file_magic*) ++ set dummy $deplibs_check_method; shift ++ file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` ++ for a_deplib in $deplibs; do ++ case $a_deplib in ++ -l*) ++ func_stripname -l '' "$a_deplib" ++ name=$func_stripname_result ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $a_deplib "*) ++ func_append newdeplibs " $a_deplib" ++ a_deplib="" ++ ;; ++ esac ++ fi ++ if test -n "$a_deplib" ; then ++ libname=`eval "\\$ECHO \"$libname_spec\""` ++ if test -n "$file_magic_glob"; then ++ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob` ++ else ++ libnameglob=$libname ++ fi ++ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob` ++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do ++ if test "$want_nocaseglob" = yes; then ++ shopt -s nocaseglob ++ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` ++ $nocaseglob ++ else ++ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` ++ fi ++ for potent_lib in $potential_libs; do ++ # Follow soft links. ++ if ls -lLd "$potent_lib" 2>/dev/null | ++ $GREP " -> " >/dev/null; then ++ continue ++ fi ++ # The statement above tries to avoid entering an ++ # endless loop below, in case of cyclic links. ++ # We might still enter an endless loop, since a link ++ # loop can be closed while we follow links, ++ # but so what? ++ potlib="$potent_lib" ++ while test -h "$potlib" 2>/dev/null; do ++ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` ++ case $potliblink in ++ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; ++ *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; ++ esac ++ done ++ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | ++ $SED -e 10q | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ func_append newdeplibs " $a_deplib" ++ a_deplib="" ++ break 2 ++ fi ++ done ++ done ++ fi ++ if test -n "$a_deplib" ; then ++ droppeddeps=yes ++ echo ++ $ECHO "*** Warning: linker path does not have real file for library $a_deplib." ++ echo "*** I have the capability to make that library automatically link in when" ++ echo "*** you link to this library. But I can only do this if you have a" ++ echo "*** shared version of the library, which you do not appear to have" ++ echo "*** because I did check the linker path looking for a file starting" ++ if test -z "$potlib" ; then ++ $ECHO "*** with $libname but no candidates were found. (...for file magic test)" ++ else ++ $ECHO "*** with $libname and none of the candidates passed a file format test" ++ $ECHO "*** using a file magic. Last file checked: $potlib" ++ fi ++ fi ++ ;; ++ *) ++ # Add a -L argument. ++ func_append newdeplibs " $a_deplib" ++ ;; ++ esac ++ done # Gone through all deplibs. ++ ;; ++ match_pattern*) ++ set dummy $deplibs_check_method; shift ++ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` ++ for a_deplib in $deplibs; do ++ case $a_deplib in ++ -l*) ++ func_stripname -l '' "$a_deplib" ++ name=$func_stripname_result ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $a_deplib "*) ++ func_append newdeplibs " $a_deplib" ++ a_deplib="" ++ ;; ++ esac ++ fi ++ if test -n "$a_deplib" ; then ++ libname=`eval "\\$ECHO \"$libname_spec\""` ++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do ++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` ++ for potent_lib in $potential_libs; do ++ potlib="$potent_lib" # see symlink-check above in file_magic test ++ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ ++ $EGREP "$match_pattern_regex" > /dev/null; then ++ func_append newdeplibs " $a_deplib" ++ a_deplib="" ++ break 2 ++ fi ++ done ++ done ++ fi ++ if test -n "$a_deplib" ; then ++ droppeddeps=yes ++ echo ++ $ECHO "*** Warning: linker path does not have real file for library $a_deplib." ++ echo "*** I have the capability to make that library automatically link in when" ++ echo "*** you link to this library. But I can only do this if you have a" ++ echo "*** shared version of the library, which you do not appear to have" ++ echo "*** because I did check the linker path looking for a file starting" ++ if test -z "$potlib" ; then ++ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" ++ else ++ $ECHO "*** with $libname and none of the candidates passed a file format test" ++ $ECHO "*** using a regex pattern. Last file checked: $potlib" ++ fi ++ fi ++ ;; ++ *) ++ # Add a -L argument. ++ func_append newdeplibs " $a_deplib" ++ ;; ++ esac ++ done # Gone through all deplibs. ++ ;; ++ none | unknown | *) ++ newdeplibs="" ++ tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ for i in $predeps $postdeps ; do ++ # can't use Xsed below, because $i might contain '/' ++ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` ++ done ++ fi ++ case $tmp_deplibs in ++ *[!\ \ ]*) ++ echo ++ if test "X$deplibs_check_method" = "Xnone"; then ++ echo "*** Warning: inter-library dependencies are not supported in this platform." + else +- # Just accumulate the unique libdirs. +- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in +- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) +- ;; +- *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" +- ;; +- esac ++ echo "*** Warning: inter-library dependencies are not known to be supported." + fi +- else +- eval flag=\"$hardcode_libdir_flag_spec\" +- rpath="$rpath $flag" +- fi +- elif test -n "$runpath_var"; then +- case "$perm_rpath " in +- *" $libdir "*) ;; +- *) perm_rpath="$perm_rpath $libdir" ;; ++ echo "*** All declared inter-library dependencies are being dropped." ++ droppeddeps=yes ++ ;; + esac +- fi ++ ;; ++ esac ++ versuffix=$versuffix_save ++ major=$major_save ++ release=$release_save ++ libname=$libname_save ++ name=$name_save ++ + case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) +- case :$dllsearchpath: in +- *":$libdir:"*) ;; +- *) dllsearchpath="$dllsearchpath:$libdir";; +- esac ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # On Rhapsody replace the C library with the System framework ++ newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac +- done +- # Substitute the hardcoded libdirs into the rpath. +- if test -n "$hardcode_libdir_separator" && +- test -n "$hardcode_libdirs"; then +- libdir="$hardcode_libdirs" +- eval rpath=\" $hardcode_libdir_flag_spec\" +- fi +- compile_rpath="$rpath" + +- rpath= +- hardcode_libdirs= +- for libdir in $finalize_rpath; do +- if test -n "$hardcode_libdir_flag_spec"; then +- if test -n "$hardcode_libdir_separator"; then +- if test -z "$hardcode_libdirs"; then +- hardcode_libdirs="$libdir" ++ if test "$droppeddeps" = yes; then ++ if test "$module" = yes; then ++ echo ++ echo "*** Warning: libtool could not satisfy all declared inter-library" ++ $ECHO "*** dependencies of module $libname. Therefore, libtool will create" ++ echo "*** a static module, that should work as long as the dlopening" ++ echo "*** application is linked with the -dlopen flag." ++ if test -z "$global_symbol_pipe"; then ++ echo ++ echo "*** However, this would only work if libtool was able to extract symbol" ++ echo "*** lists from a program, using \`nm' or equivalent, but libtool could" ++ echo "*** not find such a program. So, this module is probably useless." ++ echo "*** \`nm' from GNU binutils and a full rebuild may help." ++ fi ++ if test "$build_old_libs" = no; then ++ oldlibs="$output_objdir/$libname.$libext" ++ build_libtool_libs=module ++ build_old_libs=yes + else +- # Just accumulate the unique libdirs. +- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in +- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) +- ;; +- *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" +- ;; +- esac ++ build_libtool_libs=no + fi + else +- eval flag=\"$hardcode_libdir_flag_spec\" +- rpath="$rpath $flag" +- fi +- elif test -n "$runpath_var"; then +- case "$finalize_perm_rpath " in +- *" $libdir "*) ;; +- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; +- esac +- fi +- done +- # Substitute the hardcoded libdirs into the rpath. +- if test -n "$hardcode_libdir_separator" && +- test -n "$hardcode_libdirs"; then +- libdir="$hardcode_libdirs" +- eval rpath=\" $hardcode_libdir_flag_spec\" +- fi +- finalize_rpath="$rpath" +- +- if test -n "$libobjs" && test "$build_old_libs" = yes; then +- # Transform all the library objects into standard objects. +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` +- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` +- fi ++ echo "*** The inter-library dependencies that have been dropped here will be" ++ echo "*** automatically added whenever a program is linked with this library" ++ echo "*** or is declared to -dlopen it." + +- dlsyms= +- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then +- if test -n "$NM" && test -n "$global_symbol_pipe"; then +- dlsyms="${outputname}S.c" +- else +- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 ++ if test "$allow_undefined" = no; then ++ echo ++ echo "*** Since this library must not contain undefined symbols," ++ echo "*** because either the platform does not support them or" ++ echo "*** it was explicitly requested with -no-undefined," ++ echo "*** libtool will only create a static version of it." ++ if test "$build_old_libs" = no; then ++ oldlibs="$output_objdir/$libname.$libext" ++ build_libtool_libs=module ++ build_old_libs=yes ++ else ++ build_libtool_libs=no ++ fi ++ fi ++ fi + fi ++ # Done checking deplibs! ++ deplibs=$newdeplibs + fi ++ # Time to change all our "foo.ltframework" stuff back to "-framework foo" ++ case $host in ++ *-*-darwin*) ++ newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ++ new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ++ deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ++ ;; ++ esac + +- if test -n "$dlsyms"; then +- case $dlsyms in +- "") ;; +- *.c) +- # Discover the nlist of each of the dlfiles. +- nlist="$output_objdir/${outputname}.nm" +- +- $show "$rm $nlist ${nlist}S ${nlist}T" +- $run $rm "$nlist" "${nlist}S" "${nlist}T" +- +- # Parse the name list into a source file. +- $show "creating $output_objdir/$dlsyms" +- +- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ +-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ +-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ +- +-#ifdef __cplusplus +-extern \"C\" { +-#endif +- +-/* Prevent the only kind of declaration conflicts we can make. */ +-#define lt_preloaded_symbols some_other_symbol +- +-/* External symbol declarations for the compiler. */\ +-" +- +- if test "$dlself" = yes; then +- $show "generating symbol list for \`$output'" +- +- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" +- +- # Add our own program objects to the symbol list. +- progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` +- for arg in $progfiles; do +- $show "extracting global C symbols from \`$arg'" +- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" +- done +- +- if test -n "$exclude_expsyms"; then +- $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' +- $run eval '$mv "$nlist"T "$nlist"' +- fi ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; ++ *) ++ case " $deplibs " in ++ *" -L$path/$objdir "*) ++ func_append new_libs " -L$path/$objdir" ;; ++ esac ++ ;; ++ esac ++ done ++ for deplib in $deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) func_append new_libs " $deplib" ;; ++ esac ++ ;; ++ *) func_append new_libs " $deplib" ;; ++ esac ++ done ++ deplibs="$new_libs" + +- if test -n "$export_symbols_regex"; then +- $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' +- $run eval '$mv "$nlist"T "$nlist"' +- fi ++ # All the library-specific variables (install_libdir is set above). ++ library_names= ++ old_library= ++ dlname= + +- # Prepare the list of exported symbols +- if test -z "$export_symbols"; then +- export_symbols="$output_objdir/$output.exp" +- $run $rm $export_symbols +- $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' +- else +- $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' +- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' +- $run eval 'mv "$nlist"T "$nlist"' ++ # Test again, we may have decided not to build it any more ++ if test "$build_libtool_libs" = yes; then ++ if test "$hardcode_into_libs" = yes; then ++ # Hardcode the library paths ++ hardcode_libdirs= ++ dep_rpath= ++ rpath="$finalize_rpath" ++ test "$opt_mode" != relink && rpath="$compile_rpath$rpath" ++ for libdir in $rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ func_replace_sysroot "$libdir" ++ libdir=$func_replace_sysroot_result ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ++ ;; ++ esac ++ fi ++ else ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ func_append dep_rpath " $flag" ++ fi ++ elif test -n "$runpath_var"; then ++ case "$perm_rpath " in ++ *" $libdir "*) ;; ++ *) func_apped perm_rpath " $libdir" ;; ++ esac + fi +- fi +- +- for arg in $dlprefiles; do +- $show "extracting global C symbols from \`$arg'" +- name=`echo "$arg" | sed -e 's%^.*/%%'` +- $run eval 'echo ": $name " >> "$nlist"' +- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done +- +- if test -z "$run"; then +- # Make sure we have at least an empty file. +- test -f "$nlist" || : > "$nlist" +- +- if test -n "$exclude_expsyms"; then +- egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T +- $mv "$nlist"T "$nlist" +- fi +- +- # Try sorting and uniquifying the output. +- if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then +- : +- else +- grep -v "^: " < "$nlist" > "$nlist"S +- fi +- +- if test -f "$nlist"S; then +- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ if test -n "$hardcode_libdir_flag_spec_ld"; then ++ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else +- echo '/* NONE */' >> "$output_objdir/$dlsyms" ++ eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi +- +- $echo >> "$output_objdir/$dlsyms" "\ +- +-#undef lt_preloaded_symbols +- +-#if defined (__STDC__) && __STDC__ +-# define lt_ptr void * +-#else +-# define lt_ptr char * +-# define const +-#endif +- +-/* The mapping between symbol names and symbols. */ +-const struct { +- const char *name; +- lt_ptr address; +-} +-lt_preloaded_symbols[] = +-{\ +-" +- +- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" +- +- $echo >> "$output_objdir/$dlsyms" "\ +- {0, (lt_ptr) 0} +-}; +- +-/* This works around a problem in FreeBSD linker */ +-#ifdef FREEBSD_WORKAROUND +-static const void *lt_preloaded_setup() { +- return lt_preloaded_symbols; +-} +-#endif +- +-#ifdef __cplusplus +-} +-#endif\ +-" + fi ++ if test -n "$runpath_var" && test -n "$perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $perm_rpath; do ++ func_append rpath "$dir:" ++ done ++ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" ++ fi ++ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" ++ fi + +- pic_flag_for_symtable= +- case $host in +- # compiling the symbol table file with pic_flag works around +- # a FreeBSD bug that causes programs to crash when -lm is +- # linked before any other PIC object. But we must not use +- # pic_flag when linking with -static. The problem exists in +- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. +- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) +- case "$compile_command " in +- *" -static "*) ;; +- *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; +- esac;; +- *-*-hpux*) +- case "$compile_command " in +- *" -static "*) ;; +- *) pic_flag_for_symtable=" $pic_flag -DPIC";; +- esac +- esac ++ shlibpath="$finalize_shlibpath" ++ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" ++ if test -n "$shlibpath"; then ++ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" ++ fi ++ ++ # Get the real and link names of the library. ++ eval shared_ext=\"$shrext_cmds\" ++ eval library_names=\"$library_names_spec\" ++ set dummy $library_names ++ shift ++ realname="$1" ++ shift + +- # Now compile the dynamic symbol file. +- $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" +- $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? +- +- # Clean up the generated files. +- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" +- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" +- +- # Transform the symbol file into the correct name. +- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` +- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` +- ;; +- *) +- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 +- exit 1 +- ;; +- esac +- else +- # We keep going just in case the user didn't refer to +- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe +- # really was required. ++ if test -n "$soname_spec"; then ++ eval soname=\"$soname_spec\" ++ else ++ soname="$realname" ++ fi ++ if test -z "$dlname"; then ++ dlname=$soname ++ fi + +- # Nullify the symbol file. +- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` +- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` +- fi ++ lib="$output_objdir/$realname" ++ linknames= ++ for link ++ do ++ func_append linknames " $link" ++ done + +- if test $need_relink = no || test "$build_libtool_libs" != yes; then +- # Replace the output file specification. +- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` +- link_command="$compile_command$compile_rpath" ++ # Use standard objects if they are pic ++ test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` ++ test "X$libobjs" = "X " && libobjs= + +- # We have no uninstalled library dependencies, so finalize right now. +- $show "$link_command" +- $run eval "$link_command" +- status=$? ++ delfiles= ++ if test -n "$export_symbols" && test -n "$include_expsyms"; then ++ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" ++ export_symbols="$output_objdir/$libname.uexp" ++ func_append delfiles " $export_symbols" ++ fi ++ ++ orig_export_symbols= ++ case $host_os in ++ cygwin* | mingw* | cegcc*) ++ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then ++ # exporting using user supplied symfile ++ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then ++ # and it's NOT already a .def file. Must figure out ++ # which of the given symbols are data symbols and tag ++ # them as such. So, trigger use of export_symbols_cmds. ++ # export_symbols gets reassigned inside the "prepare ++ # the list of exported symbols" if statement, so the ++ # include_expsyms logic still works. ++ orig_export_symbols="$export_symbols" ++ export_symbols= ++ always_export_symbols=yes ++ fi ++ fi ++ ;; ++ esac + +- # Delete the generated files. +- if test -n "$dlsyms"; then +- $show "$rm $output_objdir/${outputname}S.${objext}" +- $run $rm "$output_objdir/${outputname}S.${objext}" ++ # Prepare the list of exported symbols ++ if test -z "$export_symbols"; then ++ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then ++ func_verbose "generating symbol list for \`$libname.la'" ++ export_symbols="$output_objdir/$libname.exp" ++ $opt_dry_run || $RM $export_symbols ++ cmds=$export_symbols_cmds ++ save_ifs="$IFS"; IFS='~' ++ for cmd1 in $cmds; do ++ IFS="$save_ifs" ++ # Take the normal branch if the nm_file_list_spec branch ++ # doesn't work or if tool conversion is not needed. ++ case $nm_file_list_spec~$to_tool_file_cmd in ++ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) ++ try_normal_branch=yes ++ eval cmd=\"$cmd1\" ++ func_len " $cmd" ++ len=$func_len_result ++ ;; ++ *) ++ try_normal_branch=no ++ ;; ++ esac ++ if test "$try_normal_branch" = yes \ ++ && { test "$len" -lt "$max_cmd_len" \ ++ || test "$max_cmd_len" -le -1; } ++ then ++ func_show_eval "$cmd" 'exit $?' ++ skipped_export=false ++ elif test -n "$nm_file_list_spec"; then ++ func_basename "$output" ++ output_la=$func_basename_result ++ save_libobjs=$libobjs ++ save_output=$output ++ output=${output_objdir}/${output_la}.nm ++ func_to_tool_file "$output" ++ libobjs=$nm_file_list_spec$func_to_tool_file_result ++ func_append delfiles " $output" ++ func_verbose "creating $NM input file list: $output" ++ for obj in $save_libobjs; do ++ func_to_tool_file "$obj" ++ $ECHO "$func_to_tool_file_result" ++ done > "$output" ++ eval cmd=\"$cmd1\" ++ func_show_eval "$cmd" 'exit $?' ++ output=$save_output ++ libobjs=$save_libobjs ++ skipped_export=false ++ else ++ # The command line is too long to execute in one step. ++ func_verbose "using reloadable object file for export list..." ++ skipped_export=: ++ # Break out early, otherwise skipped_export may be ++ # set to false by a later but shorter cmd. ++ break ++ fi ++ done ++ IFS="$save_ifs" ++ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then ++ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' ++ func_show_eval '$MV "${export_symbols}T" "$export_symbols"' ++ fi ++ fi + fi + +- exit $status +- fi +- +- if test -n "$shlibpath_var"; then +- # We should set the shlibpath_var +- rpath= +- for dir in $temp_rpath; do +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) +- # Absolute path. +- rpath="$rpath$dir:" +- ;; ++ if test -n "$export_symbols" && test -n "$include_expsyms"; then ++ tmp_export_symbols="$export_symbols" ++ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" ++ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' ++ fi ++ ++ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then ++ # The given exports_symbols file has to be filtered, so filter it. ++ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" ++ # FIXME: $output_objdir/$libname.filter potentially contains lots of ++ # 's' commands which not all seds can handle. GNU sed should be fine ++ # though. Also, the filter scales superlinearly with the number of ++ # global variables. join(1) would be nice here, but unfortunately ++ # isn't a blessed tool. ++ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter ++ func_append delfiles " $export_symbols $output_objdir/$libname.filter" ++ export_symbols=$output_objdir/$libname.def ++ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols ++ fi ++ ++ tmp_deplibs= ++ for test_deplib in $deplibs; do ++ case " $convenience " in ++ *" $test_deplib "*) ;; + *) +- # Relative path: add a thisdir entry. +- rpath="$rpath\$thisdir/$dir:" ++ func_append tmp_deplibs " $test_deplib" + ;; + esac + done +- temp_rpath="$rpath" +- fi ++ deplibs="$tmp_deplibs" + +- if test -n "$compile_shlibpath$finalize_shlibpath"; then +- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" +- fi +- if test -n "$finalize_shlibpath"; then +- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" +- fi ++ if test -n "$convenience"; then ++ if test -n "$whole_archive_flag_spec" && ++ test "$compiler_needs_object" = yes && ++ test -z "$libobjs"; then ++ # extract the archives, so we have objects to list. ++ # TODO: could optimize this to just extract one archive. ++ whole_archive_flag_spec= ++ fi ++ if test -n "$whole_archive_flag_spec"; then ++ save_libobjs=$libobjs ++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" ++ test "X$libobjs" = "X " && libobjs= ++ else ++ gentop="$output_objdir/${outputname}x" ++ func_append generated " $gentop" + +- compile_var= +- finalize_var= +- if test -n "$runpath_var"; then +- if test -n "$perm_rpath"; then +- # We should set the runpath_var. +- rpath= +- for dir in $perm_rpath; do +- rpath="$rpath$dir:" +- done +- compile_var="$runpath_var=\"$rpath\$$runpath_var\" " +- fi +- if test -n "$finalize_perm_rpath"; then +- # We should set the runpath_var. +- rpath= +- for dir in $finalize_perm_rpath; do +- rpath="$rpath$dir:" +- done +- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " ++ func_extract_archives $gentop $convenience ++ func_append libobjs " $func_extract_archives_result" ++ test "X$libobjs" = "X " && libobjs= ++ fi + fi +- fi + +- if test "$no_install" = yes; then +- # We don't need to create a wrapper script. +- link_command="$compile_var$compile_command$compile_rpath" +- # Replace the output file specification. +- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` +- # Delete the old output file. +- $run $rm $output +- # Link the executable and exit +- $show "$link_command" +- $run eval "$link_command" || exit $? +- exit 0 +- fi ++ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then ++ eval flag=\"$thread_safe_flag_spec\" ++ func_append linker_flags " $flag" ++ fi + +- if test "$hardcode_action" = relink; then +- # Fast installation is not supported +- link_command="$compile_var$compile_command$compile_rpath" +- relink_command="$finalize_var$finalize_command$finalize_rpath" ++ # Make a backup of the uninstalled library when relinking ++ if test "$opt_mode" = relink; then ++ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? ++ fi + +- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 +- $echo "$modename: \`$output' will be relinked during installation" 1>&2 +- else +- if test "$fast_install" != no; then +- link_command="$finalize_var$compile_command$finalize_rpath" +- if test "$fast_install" = yes; then +- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` ++ # Do each of the archive commands. ++ if test "$module" = yes && test -n "$module_cmds" ; then ++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then ++ eval test_cmds=\"$module_expsym_cmds\" ++ cmds=$module_expsym_cmds + else +- # fast_install is set to needless +- relink_command= ++ eval test_cmds=\"$module_cmds\" ++ cmds=$module_cmds + fi + else +- link_command="$compile_var$compile_command$compile_rpath" +- relink_command="$finalize_var$finalize_command$finalize_rpath" +- fi +- fi +- +- # Replace the output file specification. +- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` +- +- # Delete the old output files. +- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname +- +- $show "$link_command" +- $run eval "$link_command" || exit $? +- +- # Now create the wrapper script. +- $show "creating $output" +- +- # Quote the relink command for shipping. +- if test -n "$relink_command"; then +- # Preserve any variables that may affect compiler behavior +- for var in $variables_saved_for_relink; do +- if eval test -z \"\${$var+set}\"; then +- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" +- elif eval var_value=\$$var; test -z "$var_value"; then +- relink_command="$var=; export $var; $relink_command" ++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then ++ eval test_cmds=\"$archive_expsym_cmds\" ++ cmds=$archive_expsym_cmds + else +- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` +- relink_command="$var=\"$var_value\"; export $var; $relink_command" ++ eval test_cmds=\"$archive_cmds\" ++ cmds=$archive_cmds + fi +- done +- relink_command="cd `pwd`; $relink_command" +- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` +- fi +- +- # Quote $echo for shipping. +- if test "X$echo" = "X$SHELL $0 --fallback-echo"; then +- case $0 in +- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; +- *) qecho="$SHELL `pwd`/$0 --fallback-echo";; +- esac +- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` +- else +- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` +- fi +- +- # Only actually do things if our run command is non-null. +- if test -z "$run"; then +- # win32 will think the script is a binary if it has +- # a .exe suffix, so we strip it off here. +- case $output in +- *.exe) output=`echo $output|sed 's,.exe$,,'` ;; +- esac +- # test for cygwin because mv fails w/o .exe extensions +- case $host in +- *cygwin*) exeext=.exe ;; +- *) exeext= ;; +- esac +- $rm $output +- trap "$rm $output; exit 1" 1 2 15 +- +- $echo > $output "\ +-#! $SHELL +- +-# $output - temporary wrapper script for $objdir/$outputname +-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +-# +-# The $output program cannot be directly executed until all the libtool +-# libraries that it depends on are installed. +-# +-# This wrapper script should never be moved out of the build directory. +-# If it is, it will not operate correctly. +- +-# Sed substitution that helps us do robust quoting. It backslashifies +-# metacharacters that are still active within double-quoted strings. +-Xsed='sed -e 1s/^X//' +-sed_quote_subst='$sed_quote_subst' +- +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi +- +-relink_command=\"$relink_command\" +- +-# This environment variable determines our operation mode. +-if test \"\$libtool_install_magic\" = \"$magic\"; then +- # install mode needs the following variable: +- notinst_deplibs='$notinst_deplibs' +-else +- # When we are sourced in execute mode, \$file and \$echo are already set. +- if test \"\$libtool_execute_magic\" != \"$magic\"; then +- echo=\"$qecho\" +- file=\"\$0\" +- # Make sure echo works. +- if test \"X\$1\" = X--no-reexec; then +- # Discard the --no-reexec flag, and continue. +- shift +- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then +- # Yippee, \$echo works! +- : +- else +- # Restart under the correct shell, and then maybe \$echo will work. +- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} +- fi +- fi\ +-" +- $echo >> $output "\ +- +- # Find the directory that this script lives in. +- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` +- test \"x\$thisdir\" = \"x\$file\" && thisdir=. +- +- # Follow symbolic links until we get to the real thisdir. +- file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` +- while test -n \"\$file\"; do +- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` +- +- # If there was a directory component, then change thisdir. +- if test \"x\$destdir\" != \"x\$file\"; then +- case \"\$destdir\" in +- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; +- *) thisdir=\"\$thisdir/\$destdir\" ;; +- esac +- fi +- +- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` +- file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` +- done +- +- # Try to get the absolute directory name. +- absdir=\`cd \"\$thisdir\" && pwd\` +- test -n \"\$absdir\" && thisdir=\"\$absdir\" +-" +- +- if test "$fast_install" = yes; then +- echo >> $output "\ +- program=lt-'$outputname'$exeext +- progdir=\"\$thisdir/$objdir\" +- +- if test ! -f \"\$progdir/\$program\" || \\ +- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ +- test \"X\$file\" != \"X\$progdir/\$program\"; }; then +- +- file=\"\$\$-\$program\" +- +- if test ! -d \"\$progdir\"; then +- $mkdir \"\$progdir\" +- else +- $rm \"\$progdir/\$file\" +- fi" +- +- echo >> $output "\ +- +- # relink executable if necessary +- if test -n \"\$relink_command\"; then +- if relink_command_output=\`eval \$relink_command 2>&1\`; then : +- else +- $echo \"\$relink_command_output\" >&2 +- $rm \"\$progdir/\$file\" +- exit 1 +- fi +- fi +- +- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || +- { $rm \"\$progdir/\$program\"; +- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } +- $rm \"\$progdir/\$file\" +- fi" +- else +- echo >> $output "\ +- program='$outputname' +- progdir=\"\$thisdir/$objdir\" +-" +- fi +- +- echo >> $output "\ +- +- if test -f \"\$progdir/\$program\"; then" +- +- # Export our shlibpath_var if we have one. +- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then +- $echo >> $output "\ +- # Add our own library path to $shlibpath_var +- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" +- +- # Some systems cannot cope with colon-terminated $shlibpath_var +- # The second colon is a workaround for a bug in BeOS R4 sed +- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` +- +- export $shlibpath_var +-" + fi + +- # fixup the dll searchpath if we need to. +- if test -n "$dllsearchpath"; then +- $echo >> $output "\ +- # Add the dll search path components to the executable PATH +- PATH=$dllsearchpath:\$PATH +-" +- fi ++ if test "X$skipped_export" != "X:" && ++ func_len " $test_cmds" && ++ len=$func_len_result && ++ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ : ++ else ++ # The command line is too long to link in one step, link piecewise ++ # or, if using GNU ld and skipped_export is not :, use a linker ++ # script. ++ ++ # Save the value of $output and $libobjs because we want to ++ # use them later. If we have whole_archive_flag_spec, we ++ # want to use save_libobjs as it was before ++ # whole_archive_flag_spec was expanded, because we can't ++ # assume the linker understands whole_archive_flag_spec. ++ # This may have to be revisited, in case too many ++ # convenience libraries get linked in and end up exceeding ++ # the spec. ++ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then ++ save_libobjs=$libobjs ++ fi ++ save_output=$output ++ func_basename "$output" ++ output_la=$func_basename_result ++ ++ # Clear the reloadable object creation command queue and ++ # initialize k to one. ++ test_cmds= ++ concat_cmds= ++ objlist= ++ last_robj= ++ k=1 ++ ++ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then ++ output=${output_objdir}/${output_la}.lnkscript ++ func_verbose "creating GNU ld script: $output" ++ echo 'INPUT (' > $output ++ for obj in $save_libobjs ++ do ++ func_to_tool_file "$obj" ++ $ECHO "$func_to_tool_file_result" >> $output ++ done ++ echo ')' >> $output ++ func_append delfiles " $output" ++ func_to_tool_file "$output" ++ output=$func_to_tool_file_result ++ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then ++ output=${output_objdir}/${output_la}.lnk ++ func_verbose "creating linker input file list: $output" ++ : > $output ++ set x $save_libobjs ++ shift ++ firstobj= ++ if test "$compiler_needs_object" = yes; then ++ firstobj="$1 " ++ shift ++ fi ++ for obj ++ do ++ func_to_tool_file "$obj" ++ $ECHO "$func_to_tool_file_result" >> $output ++ done ++ func_append delfiles " $output" ++ func_to_tool_file "$output" ++ output=$firstobj\"$file_list_spec$func_to_tool_file_result\" ++ else ++ if test -n "$save_libobjs"; then ++ func_verbose "creating reloadable object files..." ++ output=$output_objdir/$output_la-${k}.$objext ++ eval test_cmds=\"$reload_cmds\" ++ func_len " $test_cmds" ++ len0=$func_len_result ++ len=$len0 ++ ++ # Loop over the list of objects to be linked. ++ for obj in $save_libobjs ++ do ++ func_len " $obj" ++ func_arith $len + $func_len_result ++ len=$func_arith_result ++ if test "X$objlist" = X || ++ test "$len" -lt "$max_cmd_len"; then ++ func_append objlist " $obj" ++ else ++ # The command $test_cmds is almost too long, add a ++ # command to the queue. ++ if test "$k" -eq 1 ; then ++ # The first file doesn't have a previous command to add. ++ reload_objs=$objlist ++ eval concat_cmds=\"$reload_cmds\" ++ else ++ # All subsequent reloadable object files will link in ++ # the last one created. ++ reload_objs="$objlist $last_robj" ++ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" ++ fi ++ last_robj=$output_objdir/$output_la-${k}.$objext ++ func_arith $k + 1 ++ k=$func_arith_result ++ output=$output_objdir/$output_la-${k}.$objext ++ objlist=" $obj" ++ func_len " $last_robj" ++ func_arith $len0 + $func_len_result ++ len=$func_arith_result ++ fi ++ done ++ # Handle the remaining objects by creating one last ++ # reloadable object file. All subsequent reloadable object ++ # files will link in the last one created. ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ reload_objs="$objlist $last_robj" ++ eval concat_cmds=\"\${concat_cmds}$reload_cmds\" ++ if test -n "$last_robj"; then ++ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" ++ fi ++ func_append delfiles " $output" + +- $echo >> $output "\ +- if test \"\$libtool_execute_magic\" != \"$magic\"; then +- # Run the actual program with our arguments. +-" +- case $host in +- # win32 systems need to use the prog path for dll +- # lookup to work +- *-*-cygwin* | *-*-pw32*) +- $echo >> $output "\ +- exec \$progdir/\$program \${1+\"\$@\"} +-" +- ;; ++ else ++ output= ++ fi + +- # Backslashes separate directories on plain windows +- *-*-mingw | *-*-os2*) +- $echo >> $output "\ +- exec \$progdir\\\\\$program \${1+\"\$@\"} +-" +- ;; ++ if ${skipped_export-false}; then ++ func_verbose "generating symbol list for \`$libname.la'" ++ export_symbols="$output_objdir/$libname.exp" ++ $opt_dry_run || $RM $export_symbols ++ libobjs=$output ++ # Append the command to create the export file. ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" ++ if test -n "$last_robj"; then ++ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" ++ fi ++ fi + +- *) +- $echo >> $output "\ +- # Export the path to the program. +- PATH=\"\$progdir:\$PATH\" +- export PATH ++ test -n "$save_libobjs" && ++ func_verbose "creating a temporary reloadable object file: $output" + +- exec \$program \${1+\"\$@\"} +-" +- ;; +- esac +- $echo >> $output "\ +- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" +- exit 1 +- fi +- else +- # The program doesn't exist. +- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 +- \$echo \"This script is just a wrapper for \$program.\" 1>&2 +- echo \"See the $PACKAGE documentation for more information.\" 1>&2 +- exit 1 +- fi +-fi\ +-" +- chmod +x $output +- fi +- exit 0 +- ;; +- esac ++ # Loop through the commands generated above and execute them. ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $concat_cmds; do ++ IFS="$save_ifs" ++ $opt_silent || { ++ func_quote_for_expand "$cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ $opt_dry_run || eval "$cmd" || { ++ lt_exit=$? ++ ++ # Restore the uninstalled library and exit ++ if test "$opt_mode" = relink; then ++ ( cd "$output_objdir" && \ ++ $RM "${realname}T" && \ ++ $MV "${realname}U" "$realname" ) ++ fi + +- # See if we need to build an old-fashioned archive. +- for oldlib in $oldlibs; do ++ exit $lt_exit ++ } ++ done ++ IFS="$save_ifs" + +- if test "$build_libtool_libs" = convenience; then +- oldobjs="$libobjs_save" +- addlibs="$convenience" +- build_libtool_libs=no +- else +- if test "$build_libtool_libs" = module; then +- oldobjs="$libobjs_save" +- build_libtool_libs=no +- else +- oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` +- fi +- addlibs="$old_convenience" +- fi ++ if test -n "$export_symbols_regex" && ${skipped_export-false}; then ++ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' ++ func_show_eval '$MV "${export_symbols}T" "$export_symbols"' ++ fi ++ fi + +- if test -n "$addlibs"; then +- gentop="$output_objdir/${outputname}x" +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "mkdir $gentop" +- $run mkdir "$gentop" +- status=$? +- if test $status -ne 0 && test ! -d "$gentop"; then +- exit $status +- fi +- generated="$generated $gentop" +- +- # Add in members from convenience archives. +- for xlib in $addlibs; do +- # Extract the objects. +- case $xlib in +- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; +- *) xabs=`pwd`"/$xlib" ;; +- esac +- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` +- xdir="$gentop/$xlib" ++ if ${skipped_export-false}; then ++ if test -n "$export_symbols" && test -n "$include_expsyms"; then ++ tmp_export_symbols="$export_symbols" ++ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" ++ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' ++ fi + +- $show "${rm}r $xdir" +- $run ${rm}r "$xdir" +- $show "mkdir $xdir" +- $run mkdir "$xdir" +- status=$? +- if test $status -ne 0 && test ! -d "$xdir"; then +- exit $status ++ if test -n "$orig_export_symbols"; then ++ # The given exports_symbols file has to be filtered, so filter it. ++ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" ++ # FIXME: $output_objdir/$libname.filter potentially contains lots of ++ # 's' commands which not all seds can handle. GNU sed should be fine ++ # though. Also, the filter scales superlinearly with the number of ++ # global variables. join(1) would be nice here, but unfortunately ++ # isn't a blessed tool. ++ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter ++ func_append delfiles " $export_symbols $output_objdir/$libname.filter" ++ export_symbols=$output_objdir/$libname.def ++ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols ++ fi + fi +- $show "(cd $xdir && $AR x $xabs)" +- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + +- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` +- done +- fi ++ libobjs=$output ++ # Restore the value of output. ++ output=$save_output + +- # Do each command in the archive commands. +- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then +- eval cmds=\"$old_archive_from_new_cmds\" +- else +- # Ensure that we have .o objects in place in case we decided +- # not to build a shared library, and have fallen back to building +- # static libs even though --disable-static was passed! +- for oldobj in $oldobjs; do +- if test ! -f $oldobj; then +- xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$oldobj"; then +- xdir="." ++ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then ++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" ++ test "X$libobjs" = "X " && libobjs= ++ fi ++ # Expand the library linking commands again to reset the ++ # value of $libobjs for piecewise linking. ++ ++ # Do each of the archive commands. ++ if test "$module" = yes && test -n "$module_cmds" ; then ++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then ++ cmds=$module_expsym_cmds + else +- xdir="$xdir" ++ cmds=$module_cmds ++ fi ++ else ++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then ++ cmds=$archive_expsym_cmds ++ else ++ cmds=$archive_cmds + fi +- baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` +- obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` +- $show "(cd $xdir && ${LN_S} $obj $baseobj)" +- $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? + fi +- done +- +- eval cmds=\"$old_archive_cmds\" +- fi +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- done ++ fi + +- if test -n "$generated"; then +- $show "${rm}r$generated" +- $run ${rm}r$generated +- fi ++ if test -n "$delfiles"; then ++ # Append the command to remove temporary files to $cmds. ++ eval cmds=\"\$cmds~\$RM $delfiles\" ++ fi + +- # Now create the libtool archive. +- case $output in +- *.la) +- old_library= +- test "$build_old_libs" = yes && old_library="$libname.$libext" +- $show "creating $output" ++ # Add any objects from preloaded convenience libraries ++ if test -n "$dlprefiles"; then ++ gentop="$output_objdir/${outputname}x" ++ func_append generated " $gentop" + +- # Preserve any variables that may affect compiler behavior +- for var in $variables_saved_for_relink; do +- if eval test -z \"\${$var+set}\"; then +- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" +- elif eval var_value=\$$var; test -z "$var_value"; then +- relink_command="$var=; export $var; $relink_command" +- else +- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` +- relink_command="$var=\"$var_value\"; export $var; $relink_command" ++ func_extract_archives $gentop $dlprefiles ++ func_append libobjs " $func_extract_archives_result" ++ test "X$libobjs" = "X " && libobjs= + fi +- done +- # Quote the link command for shipping. +- relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args" +- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + +- # Only create the output if not a dry run. +- if test -z "$run"; then +- for installed in no yes; do +- if test "$installed" = yes; then +- if test -z "$install_libdir"; then +- break ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ $opt_silent || { ++ func_quote_for_expand "$cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ $opt_dry_run || eval "$cmd" || { ++ lt_exit=$? ++ ++ # Restore the uninstalled library and exit ++ if test "$opt_mode" = relink; then ++ ( cd "$output_objdir" && \ ++ $RM "${realname}T" && \ ++ $MV "${realname}U" "$realname" ) ++ fi ++ ++ exit $lt_exit ++ } ++ done ++ IFS="$save_ifs" ++ ++ # Restore the uninstalled library and exit ++ if test "$opt_mode" = relink; then ++ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? ++ ++ if test -n "$convenience"; then ++ if test -z "$whole_archive_flag_spec"; then ++ func_show_eval '${RM}r "$gentop"' + fi +- output="$output_objdir/$outputname"i +- # Replace all uninstalled libtool libraries with the installed ones +- newdependency_libs= +- for deplib in $dependency_libs; do +- case $deplib in +- *.la) +- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` +- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` +- if test -z "$libdir"; then +- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 +- exit 1 +- fi +- newdependency_libs="$newdependency_libs $libdir/$name" +- ;; +- *) newdependency_libs="$newdependency_libs $deplib" ;; +- esac +- done +- dependency_libs="$newdependency_libs" +- newdlfiles= +- for lib in $dlfiles; do +- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` +- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` +- if test -z "$libdir"; then +- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit 1 +- fi +- newdlfiles="$newdlfiles $libdir/$name" +- done +- dlfiles="$newdlfiles" +- newdlprefiles= +- for lib in $dlprefiles; do +- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` +- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` +- if test -z "$libdir"; then +- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit 1 +- fi +- newdlprefiles="$newdlprefiles $libdir/$name" +- done +- dlprefiles="$newdlprefiles" + fi +- $rm $output +- # place dlname in correct position for cygwin +- tdlname=$dlname +- case $host,$output,$installed,$module,$dlname in +- *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; +- esac +- $echo > $output "\ +-# $outputname - a libtool library file +-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +-# +-# Please DO NOT delete this file! +-# It is necessary for linking the library. + +-# The name that we can dlopen(3). +-dlname='$tdlname' ++ exit $EXIT_SUCCESS ++ fi + +-# Names of this library. +-library_names='$library_names' ++ # Create links to the real library. ++ for linkname in $linknames; do ++ if test "$realname" != "$linkname"; then ++ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' ++ fi ++ done + +-# The name of the static archive. +-old_library='$old_library' ++ # If -module or -export-dynamic was specified, set the dlname. ++ if test "$module" = yes || test "$export_dynamic" = yes; then ++ # On all known operating systems, these are identical. ++ dlname="$soname" ++ fi ++ fi ++ ;; + +-# Libraries that this one depends upon. +-dependency_libs='$dependency_libs' ++ obj) ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ func_warning "\`-dlopen' is ignored for objects" ++ fi + +-# Version information for $libname. +-current=$current +-age=$age +-revision=$revision ++ case " $deplibs" in ++ *\ -l* | *\ -L*) ++ func_warning "\`-l' and \`-L' are ignored for objects" ;; ++ esac + +-# Is this an already installed library? +-installed=$installed ++ test -n "$rpath" && \ ++ func_warning "\`-rpath' is ignored for objects" + +-# Files to dlopen/dlpreopen +-dlopen='$dlfiles' +-dlpreopen='$dlprefiles' ++ test -n "$xrpath" && \ ++ func_warning "\`-R' is ignored for objects" + +-# Directory that this library needs to be installed in: +-libdir='$install_libdir'" +- if test "$installed" = no && test $need_relink = yes; then +- $echo >> $output "\ +-relink_command=\"$relink_command\"" +- fi +- done +- fi ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info' is ignored for objects" + +- # Do a symbolic link so that the libtool archive can be found in +- # LD_LIBRARY_PATH before the program is installed. +- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" +- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? +- ;; +- esac +- exit 0 +- ;; ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for objects" + +- # libtool install mode +- install) +- modename="$modename: install" ++ case $output in ++ *.lo) ++ test -n "$objs$old_deplibs" && \ ++ func_fatal_error "cannot build library object \`$output' from non-libtool objects" + +- # There may be an optional sh(1) argument at the beginning of +- # install_prog (especially on Windows NT). +- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || +- # Allow the use of GNU shtool's install command. +- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then +- # Aesthetically quote it. +- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) +- arg="\"$arg\"" ++ libobj=$output ++ func_lo2o "$libobj" ++ obj=$func_lo2o_result ++ ;; ++ *) ++ libobj= ++ obj="$output" + ;; + esac +- install_prog="$arg " +- arg="$1" +- shift +- else +- install_prog= +- arg="$nonopt" +- fi + +- # The real first argument should be the name of the installation program. +- # Aesthetically quote it. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) +- arg="\"$arg\"" +- ;; +- esac +- install_prog="$install_prog$arg" ++ # Delete the old objects. ++ $opt_dry_run || $RM $obj $libobj + +- # We need to accept at least all the BSD install flags. +- dest= +- files= +- opts= +- prev= +- install_type= +- isdir=no +- stripme= +- for arg +- do +- if test -n "$dest"; then +- files="$files $dest" +- dest="$arg" +- continue ++ # Objects from convenience libraries. This assumes ++ # single-version convenience libraries. Whenever we create ++ # different ones for PIC/non-PIC, this we'll have to duplicate ++ # the extraction. ++ reload_conv_objs= ++ gentop= ++ # reload_cmds runs $LD directly, so let us get rid of ++ # -Wl from whole_archive_flag_spec and hope we can get by with ++ # turning comma into space.. ++ wl= ++ ++ if test -n "$convenience"; then ++ if test -n "$whole_archive_flag_spec"; then ++ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" ++ reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` ++ else ++ gentop="$output_objdir/${obj}x" ++ func_append generated " $gentop" ++ ++ func_extract_archives $gentop $convenience ++ reload_conv_objs="$reload_objs $func_extract_archives_result" ++ fi + fi + +- case $arg in +- -d) isdir=yes ;; +- -f) prev="-f" ;; +- -g) prev="-g" ;; +- -m) prev="-m" ;; +- -o) prev="-o" ;; +- -s) +- stripme=" -s" +- continue +- ;; +- -*) ;; ++ # If we're not building shared, we need to use non_pic_objs ++ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" + +- *) +- # If the previous option needed an argument, then skip it. +- if test -n "$prev"; then +- prev= +- else +- dest="$arg" +- continue ++ # Create the old-style object. ++ reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test ++ ++ output="$obj" ++ func_execute_cmds "$reload_cmds" 'exit $?' ++ ++ # Exit if we aren't doing a library object file. ++ if test -z "$libobj"; then ++ if test -n "$gentop"; then ++ func_show_eval '${RM}r "$gentop"' + fi +- ;; +- esac + +- # Aesthetically quote the argument. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) +- arg="\"$arg\"" +- ;; ++ exit $EXIT_SUCCESS ++ fi ++ ++ if test "$build_libtool_libs" != yes; then ++ if test -n "$gentop"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ ++ # Create an invalid libtool object if no PIC, so that we don't ++ # accidentally link it into a program. ++ # $show "echo timestamp > $libobj" ++ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? ++ exit $EXIT_SUCCESS ++ fi ++ ++ if test -n "$pic_flag" || test "$pic_mode" != default; then ++ # Only do commands if we really have different PIC objects. ++ reload_objs="$libobjs $reload_conv_objs" ++ output="$libobj" ++ func_execute_cmds "$reload_cmds" 'exit $?' ++ fi ++ ++ if test -n "$gentop"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ ++ exit $EXIT_SUCCESS ++ ;; ++ ++ prog) ++ case $host in ++ *cygwin*) func_stripname '' '.exe' "$output" ++ output=$func_stripname_result.exe;; + esac +- install_prog="$install_prog $arg" +- done ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info' is ignored for programs" + +- if test -z "$install_prog"; then +- $echo "$modename: you must specify an install program" 1>&2 +- $echo "$help" 1>&2 +- exit 1 +- fi ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for programs" + +- if test -n "$prev"; then +- $echo "$modename: the \`$prev' option requires an argument" 1>&2 +- $echo "$help" 1>&2 +- exit 1 +- fi ++ test "$preload" = yes \ ++ && test "$dlopen_support" = unknown \ ++ && test "$dlopen_self" = unknown \ ++ && test "$dlopen_self_static" = unknown && \ ++ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + +- if test -z "$files"; then +- if test -z "$dest"; then +- $echo "$modename: no file or destination specified" 1>&2 +- else +- $echo "$modename: you must specify a destination" 1>&2 +- fi +- $echo "$help" 1>&2 +- exit 1 +- fi ++ case $host in ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # On Rhapsody replace the C library is the System framework ++ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` ++ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` ++ ;; ++ esac + +- # Strip any trailing slash from the destination. +- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` ++ case $host in ++ *-*-darwin*) ++ # Don't allow lazy linking, it breaks C++ global constructors ++ # But is supposedly fixed on 10.4 or later (yay!). ++ if test "$tagname" = CXX ; then ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in ++ 10.[0123]) ++ func_append compile_command " ${wl}-bind_at_load" ++ func_append finalize_command " ${wl}-bind_at_load" ++ ;; ++ esac ++ fi ++ # Time to change all our "foo.ltframework" stuff back to "-framework foo" ++ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ++ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ++ ;; ++ esac + +- # Check to see that the destination is a directory. +- test -d "$dest" && isdir=yes +- if test "$isdir" = yes; then +- destdir="$dest" +- destname= +- else +- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` +- test "X$destdir" = "X$dest" && destdir=. +- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` + +- # Not a directory, so check to see that there is only one file specified. +- set dummy $files +- if test $# -gt 2; then +- $echo "$modename: \`$dest' is not a directory" 1>&2 +- $echo "$help" 1>&2 +- exit 1 +- fi +- fi +- case $destdir in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- for file in $files; do +- case $file in +- *.lo) ;; ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; + *) +- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 +- $echo "$help" 1>&2 +- exit 1 ++ case " $compile_deplibs " in ++ *" -L$path/$objdir "*) ++ func_append new_libs " -L$path/$objdir" ;; ++ esac + ;; + esac + done +- ;; +- esac +- +- # This variable tells wrapper scripts just to set variables rather +- # than running their programs. +- libtool_install_magic="$magic" +- +- staticlibs= +- future_libdirs= +- current_libdirs= +- for file in $files; do +- +- # Do each installation. +- case $file in +- *.$libext) +- # Do the static libraries later. +- staticlibs="$staticlibs $file" +- ;; ++ for deplib in $compile_deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) func_append new_libs " $deplib" ;; ++ esac ++ ;; ++ *) func_append new_libs " $deplib" ;; ++ esac ++ done ++ compile_deplibs="$new_libs" + +- *.la) +- # Check to see that this really is a libtool archive. +- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : +- else +- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 +- $echo "$help" 1>&2 +- exit 1 +- fi + +- library_names= +- old_library= +- relink_command= +- # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $file ;; +- *) . ./$file ;; +- esac ++ func_append compile_command " $compile_deplibs" ++ func_append finalize_command " $finalize_deplibs" + +- # Add the libdir to current_libdirs if it is the destination. +- if test "X$destdir" = "X$libdir"; then +- case "$current_libdirs " in ++ if test -n "$rpath$xrpath"; then ++ # If the user specified any rpath flags, then add them. ++ for libdir in $rpath $xrpath; do ++ # This is the magic to use -rpath. ++ case "$finalize_rpath " in + *" $libdir "*) ;; +- *) current_libdirs="$current_libdirs $libdir" ;; ++ *) func_append finalize_rpath " $libdir" ;; + esac +- else +- # Note the libdir as a future libdir. +- case "$future_libdirs " in ++ done ++ fi ++ ++ # Now hardcode the library paths ++ rpath= ++ hardcode_libdirs= ++ for libdir in $compile_rpath $finalize_rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ++ ;; ++ esac ++ fi ++ else ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ func_append rpath " $flag" ++ fi ++ elif test -n "$runpath_var"; then ++ case "$perm_rpath " in + *" $libdir "*) ;; +- *) future_libdirs="$future_libdirs $libdir" ;; ++ *) func_append perm_rpath " $libdir" ;; + esac + fi ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) ++ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` ++ case :$dllsearchpath: in ++ *":$libdir:"*) ;; ++ ::) dllsearchpath=$libdir;; ++ *) func_append dllsearchpath ":$libdir";; ++ esac ++ case :$dllsearchpath: in ++ *":$testbindir:"*) ;; ++ ::) dllsearchpath=$testbindir;; ++ *) func_append dllsearchpath ":$testbindir";; ++ esac ++ ;; ++ esac ++ done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ eval rpath=\" $hardcode_libdir_flag_spec\" ++ fi ++ compile_rpath="$rpath" + +- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ +- test "X$dir" = "X$file/" && dir= +- dir="$dir$objdir" +- +- if test -n "$relink_command"; then +- $echo "$modename: warning: relinking \`$file'" 1>&2 +- $show "$relink_command" +- if $run eval "$relink_command"; then : ++ rpath= ++ hardcode_libdirs= ++ for libdir in $finalize_rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ++ ;; ++ esac ++ fi + else +- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 +- continue ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ func_append rpath " $flag" + fi ++ elif test -n "$runpath_var"; then ++ case "$finalize_perm_rpath " in ++ *" $libdir "*) ;; ++ *) func_append finalize_perm_rpath " $libdir" ;; ++ esac + fi ++ done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ eval rpath=\" $hardcode_libdir_flag_spec\" ++ fi ++ finalize_rpath="$rpath" + +- # See the names of the shared library. +- set dummy $library_names +- if test -n "$2"; then +- realname="$2" +- shift +- shift ++ if test -n "$libobjs" && test "$build_old_libs" = yes; then ++ # Transform all the library objects into standard objects. ++ compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` ++ finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` ++ fi + +- srcname="$realname" +- test -n "$relink_command" && srcname="$realname"T ++ func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + +- # Install the shared library and build the symlinks. +- $show "$install_prog $dir/$srcname $destdir/$realname" +- $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? +- if test -n "$stripme" && test -n "$striplib"; then +- $show "$striplib $destdir/$realname" +- $run eval "$striplib $destdir/$realname" || exit $? +- fi ++ # template prelinking step ++ if test -n "$prelink_cmds"; then ++ func_execute_cmds "$prelink_cmds" 'exit $?' ++ fi + +- if test $# -gt 0; then +- # Delete the old symlinks, and create new ones. +- for linkname +- do +- if test "$linkname" != "$realname"; then +- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" +- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" +- fi +- done +- fi ++ wrappers_required=yes ++ case $host in ++ *cegcc* | *mingw32ce*) ++ # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. ++ wrappers_required=no ++ ;; ++ *cygwin* | *mingw* ) ++ if test "$build_libtool_libs" != yes; then ++ wrappers_required=no ++ fi ++ ;; ++ *) ++ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then ++ wrappers_required=no ++ fi ++ ;; ++ esac ++ if test "$wrappers_required" = no; then ++ # Replace the output file specification. ++ compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` ++ link_command="$compile_command$compile_rpath" + +- # Do each command in the postinstall commands. +- lib="$destdir/$realname" +- eval cmds=\"$postinstall_cmds\" +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" ++ # We have no uninstalled library dependencies, so finalize right now. ++ exit_status=0 ++ func_show_eval "$link_command" 'exit_status=$?' ++ ++ if test -n "$postlink_cmds"; then ++ func_to_tool_file "$output" ++ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` ++ func_execute_cmds "$postlink_cmds" 'exit $?' + fi + +- # Install the pseudo-library for information purposes. +- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- instname="$dir/$name"i +- $show "$install_prog $instname $destdir/$name" +- $run eval "$install_prog $instname $destdir/$name" || exit $? ++ # Delete the generated files. ++ if test -f "$output_objdir/${outputname}S.${objext}"; then ++ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' ++ fi + +- # Maybe install the static library, too. +- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" +- ;; ++ exit $exit_status ++ fi + +- *.lo) +- # Install (i.e. copy) a libtool object. ++ if test -n "$compile_shlibpath$finalize_shlibpath"; then ++ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" ++ fi ++ if test -n "$finalize_shlibpath"; then ++ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" ++ fi + +- # Figure out destination file name, if it wasn't already specified. +- if test -n "$destname"; then +- destfile="$destdir/$destname" +- else +- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- destfile="$destdir/$destfile" ++ compile_var= ++ finalize_var= ++ if test -n "$runpath_var"; then ++ if test -n "$perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $perm_rpath; do ++ func_append rpath "$dir:" ++ done ++ compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi +- +- # Deduce the name of the destination old-style object file. +- case $destfile in +- *.lo) +- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` +- ;; +- *.$objext) +- staticdest="$destfile" +- destfile= +- ;; +- *) +- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 +- $echo "$help" 1>&2 +- exit 1 +- ;; +- esac +- +- # Install the libtool object if requested. +- if test -n "$destfile"; then +- $show "$install_prog $file $destfile" +- $run eval "$install_prog $file $destfile" || exit $? ++ if test -n "$finalize_perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $finalize_perm_rpath; do ++ func_append rpath "$dir:" ++ done ++ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi ++ fi + +- # Install the old object if enabled. +- if test "$build_old_libs" = yes; then +- # Deduce the name of the old-style object file. +- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` ++ if test "$no_install" = yes; then ++ # We don't need to create a wrapper script. ++ link_command="$compile_var$compile_command$compile_rpath" ++ # Replace the output file specification. ++ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` ++ # Delete the old output file. ++ $opt_dry_run || $RM $output ++ # Link the executable and exit ++ func_show_eval "$link_command" 'exit $?' + +- $show "$install_prog $staticobj $staticdest" +- $run eval "$install_prog \$staticobj \$staticdest" || exit $? ++ if test -n "$postlink_cmds"; then ++ func_to_tool_file "$output" ++ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` ++ func_execute_cmds "$postlink_cmds" 'exit $?' + fi +- exit 0 +- ;; + +- *) +- # Figure out destination file name, if it wasn't already specified. +- if test -n "$destname"; then +- destfile="$destdir/$destname" ++ exit $EXIT_SUCCESS ++ fi ++ ++ if test "$hardcode_action" = relink; then ++ # Fast installation is not supported ++ link_command="$compile_var$compile_command$compile_rpath" ++ relink_command="$finalize_var$finalize_command$finalize_rpath" ++ ++ func_warning "this platform does not like uninstalled shared libraries" ++ func_warning "\`$output' will be relinked during installation" ++ else ++ if test "$fast_install" != no; then ++ link_command="$finalize_var$compile_command$finalize_rpath" ++ if test "$fast_install" = yes; then ++ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` ++ else ++ # fast_install is set to needless ++ relink_command= ++ fi + else +- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- destfile="$destdir/$destfile" ++ link_command="$compile_var$compile_command$compile_rpath" ++ relink_command="$finalize_var$finalize_command$finalize_rpath" + fi ++ fi + +- # Do a test to see if this is really a libtool program. +- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- notinst_deplibs= +- relink_command= ++ # Replace the output file specification. ++ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + +- # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $file ;; +- *) . ./$file ;; +- esac ++ # Delete the old output files. ++ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + +- # Check the variables that should have been set. +- if test -z "$notinst_deplibs"; then +- $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 +- exit 1 +- fi ++ func_show_eval "$link_command" 'exit $?' + +- finalize=yes +- for lib in $notinst_deplibs; do +- # Check to see that each library is installed. +- libdir= +- if test -f "$lib"; then +- # If there is no directory component, then add one. +- case $lib in +- */* | *\\*) . $lib ;; +- *) . ./$lib ;; +- esac +- fi +- libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test +- if test -n "$libdir" && test ! -f "$libfile"; then +- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 +- finalize=no +- fi +- done ++ if test -n "$postlink_cmds"; then ++ func_to_tool_file "$output_objdir/$outputname" ++ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` ++ func_execute_cmds "$postlink_cmds" 'exit $?' ++ fi + +- relink_command= +- # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $file ;; +- *) . ./$file ;; +- esac ++ # Now create the wrapper script. ++ func_verbose "creating $output" + +- outputname= +- if test "$fast_install" = no && test -n "$relink_command"; then +- if test "$finalize" = yes && test -z "$run"; then +- tmpdir="/tmp" +- test -n "$TMPDIR" && tmpdir="$TMPDIR" +- tmpdir="$tmpdir/libtool-$$" +- if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : +- else +- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 +- continue +- fi +- file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- outputname="$tmpdir/$file" +- # Replace the output file specification. +- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` ++ # Quote the relink command for shipping. ++ if test -n "$relink_command"; then ++ # Preserve any variables that may affect compiler behavior ++ for var in $variables_saved_for_relink; do ++ if eval test -z \"\${$var+set}\"; then ++ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" ++ elif eval var_value=\$$var; test -z "$var_value"; then ++ relink_command="$var=; export $var; $relink_command" ++ else ++ func_quote_for_eval "$var_value" ++ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" ++ fi ++ done ++ relink_command="(cd `pwd`; $relink_command)" ++ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` ++ fi + +- $show "$relink_command" +- if $run eval "$relink_command"; then : ++ # Only actually do things if not in dry run mode. ++ $opt_dry_run || { ++ # win32 will think the script is a binary if it has ++ # a .exe suffix, so we strip it off here. ++ case $output in ++ *.exe) func_stripname '' '.exe' "$output" ++ output=$func_stripname_result ;; ++ esac ++ # test for cygwin because mv fails w/o .exe extensions ++ case $host in ++ *cygwin*) ++ exeext=.exe ++ func_stripname '' '.exe' "$outputname" ++ outputname=$func_stripname_result ;; ++ *) exeext= ;; ++ esac ++ case $host in ++ *cygwin* | *mingw* ) ++ func_dirname_and_basename "$output" "" "." ++ output_name=$func_basename_result ++ output_path=$func_dirname_result ++ cwrappersource="$output_path/$objdir/lt-$output_name.c" ++ cwrapper="$output_path/$output_name.exe" ++ $RM $cwrappersource $cwrapper ++ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 ++ ++ func_emit_cwrapperexe_src > $cwrappersource ++ ++ # The wrapper executable is built using the $host compiler, ++ # because it contains $host paths and files. If cross- ++ # compiling, it, like the target executable, must be ++ # executed on the $host or under an emulation environment. ++ $opt_dry_run || { ++ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource ++ $STRIP $cwrapper ++ } ++ ++ # Now, create the wrapper script for func_source use: ++ func_ltwrapper_scriptname $cwrapper ++ $RM $func_ltwrapper_scriptname_result ++ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 ++ $opt_dry_run || { ++ # note: this script will not be executed, so do not chmod. ++ if test "x$build" = "x$host" ; then ++ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else +- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 +- ${rm}r "$tmpdir" +- continue ++ func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi +- file="$outputname" +- else +- $echo "$modename: warning: cannot relink \`$file'" 1>&2 +- fi +- else +- # Install the binary that we compiled earlier. +- file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` +- fi +- fi ++ } ++ ;; ++ * ) ++ $RM $output ++ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + +- # remove .exe since cygwin /usr/bin/install will append another +- # one anyways +- case $install_prog,$host in +- /usr/bin/install*,*cygwin*) +- case $file:$destfile in +- *.exe:*.exe) +- # this is ok +- ;; +- *.exe:*) +- destfile=$destfile.exe +- ;; +- *:*.exe) +- destfile=`echo $destfile | sed -e 's,.exe$,,'` +- ;; +- esac ++ func_emit_wrapper no > $output ++ chmod +x $output + ;; + esac +- $show "$install_prog$stripme $file $destfile" +- $run eval "$install_prog\$stripme \$file \$destfile" || exit $? +- test -n "$outputname" && ${rm}r "$tmpdir" +- ;; +- esac +- done +- +- for file in $staticlibs; do +- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- +- # Set up the ranlib parameters. +- oldlib="$destdir/$name" ++ } ++ exit $EXIT_SUCCESS ++ ;; ++ esac + +- $show "$install_prog $file $oldlib" +- $run eval "$install_prog \$file \$oldlib" || exit $? ++ # See if we need to build an old-fashioned archive. ++ for oldlib in $oldlibs; do + +- if test -n "$stripme" && test -n "$striplib"; then +- $show "$old_striplib $oldlib" +- $run eval "$old_striplib $oldlib" || exit $? ++ if test "$build_libtool_libs" = convenience; then ++ oldobjs="$libobjs_save $symfileobj" ++ addlibs="$convenience" ++ build_libtool_libs=no ++ else ++ if test "$build_libtool_libs" = module; then ++ oldobjs="$libobjs_save" ++ build_libtool_libs=no ++ else ++ oldobjs="$old_deplibs $non_pic_objects" ++ if test "$preload" = yes && test -f "$symfileobj"; then ++ func_append oldobjs " $symfileobj" ++ fi ++ fi ++ addlibs="$old_convenience" + fi + +- # Do each command in the postinstall commands. +- eval cmds=\"$old_postinstall_cmds\" +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- done +- +- if test -n "$future_libdirs"; then +- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 +- fi +- +- if test -n "$current_libdirs"; then +- # Maybe just do a dry run. +- test -n "$run" && current_libdirs=" -n$current_libdirs" +- exec_cmd='$SHELL $0 --finish$current_libdirs' +- else +- exit 0 +- fi +- ;; ++ if test -n "$addlibs"; then ++ gentop="$output_objdir/${outputname}x" ++ func_append generated " $gentop" + +- # libtool finish mode +- finish) +- modename="$modename: finish" +- libdirs="$nonopt" +- admincmds= ++ func_extract_archives $gentop $addlibs ++ func_append oldobjs " $func_extract_archives_result" ++ fi + +- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then +- for dir +- do +- libdirs="$libdirs $dir" +- done ++ # Do each command in the archive commands. ++ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then ++ cmds=$old_archive_from_new_cmds ++ else + +- for libdir in $libdirs; do +- if test -n "$finish_cmds"; then +- # Do each command in the finish commands. +- eval cmds=\"$finish_cmds\" +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || admincmds="$admincmds +- $cmd" ++ # Add any objects from preloaded convenience libraries ++ if test -n "$dlprefiles"; then ++ gentop="$output_objdir/${outputname}x" ++ func_append generated " $gentop" ++ ++ func_extract_archives $gentop $dlprefiles ++ func_append oldobjs " $func_extract_archives_result" ++ fi ++ ++ # POSIX demands no paths to be encoded in archives. We have ++ # to avoid creating archives with duplicate basenames if we ++ # might have to extract them afterwards, e.g., when creating a ++ # static archive out of a convenience library, or when linking ++ # the entirety of a libtool archive into another (currently ++ # not supported by libtool). ++ if (for obj in $oldobjs ++ do ++ func_basename "$obj" ++ $ECHO "$func_basename_result" ++ done | sort | sort -uc >/dev/null 2>&1); then ++ : ++ else ++ echo "copying selected object files to avoid basename conflicts..." ++ gentop="$output_objdir/${outputname}x" ++ func_append generated " $gentop" ++ func_mkdir_p "$gentop" ++ save_oldobjs=$oldobjs ++ oldobjs= ++ counter=1 ++ for obj in $save_oldobjs ++ do ++ func_basename "$obj" ++ objbase="$func_basename_result" ++ case " $oldobjs " in ++ " ") oldobjs=$obj ;; ++ *[\ /]"$objbase "*) ++ while :; do ++ # Make sure we don't pick an alternate name that also ++ # overlaps. ++ newobj=lt$counter-$objbase ++ func_arith $counter + 1 ++ counter=$func_arith_result ++ case " $oldobjs " in ++ *[\ /]"$newobj "*) ;; ++ *) if test ! -f "$gentop/$newobj"; then break; fi ;; ++ esac ++ done ++ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" ++ func_append oldobjs " $gentop/$newobj" ++ ;; ++ *) func_append oldobjs " $obj" ;; ++ esac + done +- IFS="$save_ifs" +- fi +- if test -n "$finish_eval"; then +- # Do the single finish_eval. +- eval cmds=\"$finish_eval\" +- $run eval "$cmds" || admincmds="$admincmds +- $cmds" + fi +- done +- fi +- +- # Exit here if they wanted silent mode. +- test "$show" = ":" && exit 0 ++ eval cmds=\"$old_archive_cmds\" + +- echo "----------------------------------------------------------------------" +- echo "Libraries have been installed in:" +- for libdir in $libdirs; do +- echo " $libdir" ++ func_len " $cmds" ++ len=$func_len_result ++ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ cmds=$old_archive_cmds ++ elif test -n "$archiver_list_spec"; then ++ func_verbose "using command file archive linking..." ++ for obj in $oldobjs ++ do ++ func_to_tool_file "$obj" ++ $ECHO "$func_to_tool_file_result" ++ done > $output_objdir/$libname.libcmd ++ func_to_tool_file "$output_objdir/$libname.libcmd" ++ oldobjs=" $archiver_list_spec$func_to_tool_file_result" ++ cmds=$old_archive_cmds ++ else ++ # the command line is too long to link in one step, link in parts ++ func_verbose "using piecewise archive linking..." ++ save_RANLIB=$RANLIB ++ RANLIB=: ++ objlist= ++ concat_cmds= ++ save_oldobjs=$oldobjs ++ oldobjs= ++ # Is there a better way of finding the last object in the list? ++ for obj in $save_oldobjs ++ do ++ last_oldobj=$obj ++ done ++ eval test_cmds=\"$old_archive_cmds\" ++ func_len " $test_cmds" ++ len0=$func_len_result ++ len=$len0 ++ for obj in $save_oldobjs ++ do ++ func_len " $obj" ++ func_arith $len + $func_len_result ++ len=$func_arith_result ++ func_append objlist " $obj" ++ if test "$len" -lt "$max_cmd_len"; then ++ : ++ else ++ # the above command should be used before it gets too long ++ oldobjs=$objlist ++ if test "$obj" = "$last_oldobj" ; then ++ RANLIB=$save_RANLIB ++ fi ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" ++ objlist= ++ len=$len0 ++ fi ++ done ++ RANLIB=$save_RANLIB ++ oldobjs=$objlist ++ if test "X$oldobjs" = "X" ; then ++ eval cmds=\"\$concat_cmds\" ++ else ++ eval cmds=\"\$concat_cmds~\$old_archive_cmds\" ++ fi ++ fi ++ fi ++ func_execute_cmds "$cmds" 'exit $?' + done +- echo +- echo "If you ever happen to want to link against installed libraries" +- echo "in a given directory, LIBDIR, you must either use libtool, and" +- echo "specify the full pathname of the library, or use the \`-LLIBDIR'" +- echo "flag during linking and do at least one of the following:" +- if test -n "$shlibpath_var"; then +- echo " - add LIBDIR to the \`$shlibpath_var' environment variable" +- echo " during execution" +- fi +- if test -n "$runpath_var"; then +- echo " - add LIBDIR to the \`$runpath_var' environment variable" +- echo " during linking" +- fi +- if test -n "$hardcode_libdir_flag_spec"; then +- libdir=LIBDIR +- eval flag=\"$hardcode_libdir_flag_spec\" +- +- echo " - use the \`$flag' linker flag" +- fi +- if test -n "$admincmds"; then +- echo " - have your system administrator run these commands:$admincmds" +- fi +- if test -f /etc/ld.so.conf; then +- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" +- fi +- echo +- echo "See any operating system documentation about shared libraries for" +- echo "more information, such as the ld(1) and ld.so(8) manual pages." +- echo "----------------------------------------------------------------------" +- exit 0 +- ;; +- +- # libtool execute mode +- execute) +- modename="$modename: execute" + +- # The first argument is the command name. +- cmd="$nonopt" +- if test -z "$cmd"; then +- $echo "$modename: you must specify a COMMAND" 1>&2 +- $echo "$help" +- exit 1 +- fi ++ test -n "$generated" && \ ++ func_show_eval "${RM}r$generated" + +- # Handle -dlopen flags immediately. +- for file in $execute_dlfiles; do +- if test ! -f "$file"; then +- $echo "$modename: \`$file' is not a file" 1>&2 +- $echo "$help" 1>&2 +- exit 1 +- fi ++ # Now create the libtool archive. ++ case $output in ++ *.la) ++ old_library= ++ test "$build_old_libs" = yes && old_library="$libname.$libext" ++ func_verbose "creating $output" + +- dir= +- case $file in +- *.la) +- # Check to see that this really is a libtool archive. +- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : ++ # Preserve any variables that may affect compiler behavior ++ for var in $variables_saved_for_relink; do ++ if eval test -z \"\${$var+set}\"; then ++ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" ++ elif eval var_value=\$$var; test -z "$var_value"; then ++ relink_command="$var=; export $var; $relink_command" + else +- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- $echo "$help" 1>&2 +- exit 1 ++ func_quote_for_eval "$var_value" ++ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi ++ done ++ # Quote the link command for shipping. ++ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" ++ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` ++ if test "$hardcode_automatic" = yes ; then ++ relink_command= ++ fi + +- # Read the libtool library. +- dlname= +- library_names= ++ # Only create the output if not a dry run. ++ $opt_dry_run || { ++ for installed in no yes; do ++ if test "$installed" = yes; then ++ if test -z "$install_libdir"; then ++ break ++ fi ++ output="$output_objdir/$outputname"i ++ # Replace all uninstalled libtool libraries with the installed ones ++ newdependency_libs= ++ for deplib in $dependency_libs; do ++ case $deplib in ++ *.la) ++ func_basename "$deplib" ++ name="$func_basename_result" ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$deplib' is not a valid libtool archive" ++ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" ++ ;; ++ -L*) ++ func_stripname -L '' "$deplib" ++ func_replace_sysroot "$func_stripname_result" ++ func_append newdependency_libs " -L$func_replace_sysroot_result" ++ ;; ++ -R*) ++ func_stripname -R '' "$deplib" ++ func_replace_sysroot "$func_stripname_result" ++ func_append newdependency_libs " -R$func_replace_sysroot_result" ++ ;; ++ *) func_append newdependency_libs " $deplib" ;; ++ esac ++ done ++ dependency_libs="$newdependency_libs" ++ newdlfiles= ++ ++ for lib in $dlfiles; do ++ case $lib in ++ *.la) ++ func_basename "$lib" ++ name="$func_basename_result" ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$lib' is not a valid libtool archive" ++ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" ++ ;; ++ *) func_append newdlfiles " $lib" ;; ++ esac ++ done ++ dlfiles="$newdlfiles" ++ newdlprefiles= ++ for lib in $dlprefiles; do ++ case $lib in ++ *.la) ++ # Only pass preopened files to the pseudo-archive (for ++ # eventual linking with the app. that links it) if we ++ # didn't already link the preopened objects directly into ++ # the library: ++ func_basename "$lib" ++ name="$func_basename_result" ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$lib' is not a valid libtool archive" ++ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" ++ ;; ++ esac ++ done ++ dlprefiles="$newdlprefiles" ++ else ++ newdlfiles= ++ for lib in $dlfiles; do ++ case $lib in ++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; ++ *) abs=`pwd`"/$lib" ;; ++ esac ++ func_append newdlfiles " $abs" ++ done ++ dlfiles="$newdlfiles" ++ newdlprefiles= ++ for lib in $dlprefiles; do ++ case $lib in ++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; ++ *) abs=`pwd`"/$lib" ;; ++ esac ++ func_append newdlprefiles " $abs" ++ done ++ dlprefiles="$newdlprefiles" ++ fi ++ $RM $output ++ # place dlname in correct position for cygwin ++ # In fact, it would be nice if we could use this code for all target ++ # systems that can't hard-code library paths into their executables ++ # and that have no shared library path variable independent of PATH, ++ # but it turns out we can't easily determine that from inspecting ++ # libtool variables, so we have to hard-code the OSs to which it ++ # applies here; at the moment, that means platforms that use the PE ++ # object format with DLL files. See the long comment at the top of ++ # tests/bindir.at for full details. ++ tdlname=$dlname ++ case $host,$output,$installed,$module,$dlname in ++ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) ++ # If a -bindir argument was supplied, place the dll there. ++ if test "x$bindir" != x ; ++ then ++ func_relative_path "$install_libdir" "$bindir" ++ tdlname=$func_relative_path_result$dlname ++ else ++ # Otherwise fall back on heuristic. ++ tdlname=../bin/$dlname ++ fi ++ ;; ++ esac ++ $ECHO > $output "\ ++# $outputname - a libtool library file ++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION ++# ++# Please DO NOT delete this file! ++# It is necessary for linking the library. + +- # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $file ;; +- *) . ./$file ;; +- esac ++# The name that we can dlopen(3). ++dlname='$tdlname' + +- # Skip this library if it cannot be dlopened. +- if test -z "$dlname"; then +- # Warn if it was a shared library. +- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" +- continue +- fi ++# Names of this library. ++library_names='$library_names' + +- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` +- test "X$dir" = "X$file" && dir=. ++# The name of the static archive. ++old_library='$old_library' + +- if test -f "$dir/$objdir/$dlname"; then +- dir="$dir/$objdir" +- else +- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 +- exit 1 +- fi +- ;; ++# Linker flags that can not go in dependency_libs. ++inherited_linker_flags='$new_inherited_linker_flags' + +- *.lo) +- # Just add the directory containing the .lo file. +- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` +- test "X$dir" = "X$file" && dir=. +- ;; ++# Libraries that this one depends upon. ++dependency_libs='$dependency_libs' + +- *) +- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 +- continue +- ;; +- esac ++# Names of additional weak libraries provided by this library ++weak_library_names='$weak_libs' + +- # Get the absolute pathname. +- absdir=`cd "$dir" && pwd` +- test -n "$absdir" && dir="$absdir" ++# Version information for $libname. ++current=$current ++age=$age ++revision=$revision + +- # Now add the directory to shlibpath_var. +- if eval "test -z \"\$$shlibpath_var\""; then +- eval "$shlibpath_var=\"\$dir\"" +- else +- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" +- fi +- done ++# Is this an already installed library? ++installed=$installed + +- # This variable tells wrapper scripts just to set shlibpath_var +- # rather than running their programs. +- libtool_execute_magic="$magic" ++# Should we warn about portability when linking against -modules? ++shouldnotlink=$module + +- # Check if any of the arguments is a wrapper script. +- args= +- for file +- do +- case $file in +- -*) ;; +- *) +- # Do a test to see if this is really a libtool program. +- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $file ;; +- *) . ./$file ;; +- esac ++# Files to dlopen/dlpreopen ++dlopen='$dlfiles' ++dlpreopen='$dlprefiles' + +- # Transform arg to wrapped name. +- file="$progdir/$program" +- fi +- ;; +- esac +- # Quote arguments (to preserve shell metacharacters). +- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` +- args="$args \"$file\"" +- done ++# Directory that this library needs to be installed in: ++libdir='$install_libdir'" ++ if test "$installed" = no && test "$need_relink" = yes; then ++ $ECHO >> $output "\ ++relink_command=\"$relink_command\"" ++ fi ++ done ++ } + +- if test -z "$run"; then +- if test -n "$shlibpath_var"; then +- # Export the shlibpath_var. +- eval "export $shlibpath_var" +- fi ++ # Do a symbolic link so that the libtool archive can be found in ++ # LD_LIBRARY_PATH before the program is installed. ++ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ++ ;; ++ esac ++ exit $EXIT_SUCCESS ++} + +- # Restore saved enviroment variables +- if test "${save_LC_ALL+set}" = set; then +- LC_ALL="$save_LC_ALL"; export LC_ALL +- fi +- if test "${save_LANG+set}" = set; then +- LANG="$save_LANG"; export LANG +- fi ++{ test "$opt_mode" = link || test "$opt_mode" = relink; } && ++ func_mode_link ${1+"$@"} + +- # Now prepare to actually exec the command. +- exec_cmd='"$cmd"$args' +- else +- # Display what would be done. +- if test -n "$shlibpath_var"; then +- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" +- $echo "export $shlibpath_var" +- fi +- $echo "$cmd$args" +- exit 0 +- fi +- ;; + +- # libtool clean and uninstall mode +- clean | uninstall) +- modename="$modename: $mode" +- rm="$nonopt" ++# func_mode_uninstall arg... ++func_mode_uninstall () ++{ ++ $opt_debug ++ RM="$nonopt" + files= + rmforce= + exit_status=0 +@@ -4637,43 +9441,41 @@ + for arg + do + case $arg in +- -f) rm="$rm $arg"; rmforce=yes ;; +- -*) rm="$rm $arg" ;; +- *) files="$files $arg" ;; ++ -f) func_append RM " $arg"; rmforce=yes ;; ++ -*) func_append RM " $arg" ;; ++ *) func_append files " $arg" ;; + esac + done + +- if test -z "$rm"; then +- $echo "$modename: you must specify an RM program" 1>&2 +- $echo "$help" 1>&2 +- exit 1 +- fi ++ test -z "$RM" && \ ++ func_fatal_help "you must specify an RM program" + + rmdirs= + + for file in $files; do +- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$dir" = "X$file"; then +- dir=. +- objdir="$objdir" ++ func_dirname "$file" "" "." ++ dir="$func_dirname_result" ++ if test "X$dir" = X.; then ++ odir="$objdir" + else +- objdir="$dir/$objdir" ++ odir="$dir/$objdir" + fi +- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- test $mode = uninstall && objdir="$dir" ++ func_basename "$file" ++ name="$func_basename_result" ++ test "$opt_mode" = uninstall && odir="$dir" + +- # Remember objdir for removal later, being careful to avoid duplicates +- if test $mode = clean; then ++ # Remember odir for removal later, being careful to avoid duplicates ++ if test "$opt_mode" = clean; then + case " $rmdirs " in +- *" $objdir "*) ;; +- *) rmdirs="$rmdirs $objdir" ;; ++ *" $odir "*) ;; ++ *) func_append rmdirs " $odir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. +- if (test -L "$file") >/dev/null 2>&1 \ +- || (test -h "$file") >/dev/null 2>&1 \ +- || test -f "$file"; then ++ if { test -L "$file"; } >/dev/null 2>&1 || ++ { test -h "$file"; } >/dev/null 2>&1 || ++ test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 +@@ -4687,298 +9489,154 @@ + case $name in + *.la) + # Possibly a libtool archive, so verify it. +- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- . $dir/$name ++ if func_lalib_p "$file"; then ++ func_source $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do +- rmfiles="$rmfiles $objdir/$n" ++ func_append rmfiles " $odir/$n" + done +- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" +- test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ++ test -n "$old_library" && func_append rmfiles " $odir/$old_library" + +- if test $mode = uninstall; then ++ case "$opt_mode" in ++ clean) ++ case " $library_names " in ++ *" $dlname "*) ;; ++ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; ++ esac ++ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" ++ ;; ++ uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. +- eval cmds=\"$postuninstall_cmds\" +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" +- if test $? != 0 && test "$rmforce" != yes; then +- exit_status=1 +- fi +- done +- IFS="$save_ifs" ++ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. +- eval cmds=\"$old_postuninstall_cmds\" +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" +- if test $? != 0 && test "$rmforce" != yes; then +- exit_status=1 +- fi +- done +- IFS="$save_ifs" ++ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. +- fi ++ ;; ++ esac + fi + ;; + + *.lo) +- if test "$build_old_libs" = yes; then +- oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` +- rmfiles="$rmfiles $dir/$oldobj" ++ # Possibly a libtool object, so verify it. ++ if func_lalib_p "$file"; then ++ ++ # Read the .lo file ++ func_source $dir/$name ++ ++ # Add PIC object to the list of files to remove. ++ if test -n "$pic_object" && ++ test "$pic_object" != none; then ++ func_append rmfiles " $dir/$pic_object" ++ fi ++ ++ # Add non-PIC object to the list of files to remove. ++ if test -n "$non_pic_object" && ++ test "$non_pic_object" != none; then ++ func_append rmfiles " $dir/$non_pic_object" ++ fi + fi + ;; + + *) +- # Do a test to see if this is a libtool program. +- if test $mode = clean && +- (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- relink_command= +- . $dir/$file ++ if test "$opt_mode" = clean ; then ++ noexename=$name ++ case $file in ++ *.exe) ++ func_stripname '' '.exe' "$file" ++ file=$func_stripname_result ++ func_stripname '' '.exe' "$name" ++ noexename=$func_stripname_result ++ # $file with .exe has already been added to rmfiles, ++ # add $file without .exe ++ func_append rmfiles " $file" ++ ;; ++ esac ++ # Do a test to see if this is a libtool program. ++ if func_ltwrapper_p "$file"; then ++ if func_ltwrapper_executable_p "$file"; then ++ func_ltwrapper_scriptname "$file" ++ relink_command= ++ func_source $func_ltwrapper_scriptname_result ++ func_append rmfiles " $func_ltwrapper_scriptname_result" ++ else ++ relink_command= ++ func_source $dir/$noexename ++ fi + +- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" +- if test "$fast_install" = yes && test -n "$relink_command"; then +- rmfiles="$rmfiles $objdir/lt-$name" ++ # note $name still contains .exe if it was in $file originally ++ # as does the version of $file that was added into $rmfiles ++ func_append rmfiles " $odir/$name $odir/${name}S.${objext}" ++ if test "$fast_install" = yes && test -n "$relink_command"; then ++ func_append rmfiles " $odir/lt-$name" ++ fi ++ if test "X$noexename" != "X$name" ; then ++ func_append rmfiles " $odir/lt-${noexename}.c" ++ fi + fi + fi + ;; + esac +- $show "$rm $rmfiles" +- $run $rm $rmfiles || exit_status=1 ++ func_show_eval "$RM $rmfiles" 'exit_status=1' + done + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then +- $show "rmdir $dir" +- $run rmdir $dir >/dev/null 2>&1 ++ func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done + + exit $exit_status +- ;; ++} + +- "") +- $echo "$modename: you must specify a MODE" 1>&2 +- $echo "$generic_help" 1>&2 +- exit 1 +- ;; +- esac ++{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && ++ func_mode_uninstall ${1+"$@"} + +- if test -z "$exec_cmd"; then +- $echo "$modename: invalid operation mode \`$mode'" 1>&2 +- $echo "$generic_help" 1>&2 +- exit 1 +- fi +-fi # test -z "$show_help" ++test -z "$opt_mode" && { ++ help="$generic_help" ++ func_fatal_help "you must specify a MODE" ++} ++ ++test -z "$exec_cmd" && \ ++ func_fatal_help "invalid operation mode \`$opt_mode'" + + if test -n "$exec_cmd"; then +- eval exec $exec_cmd +- exit 1 ++ eval exec "$exec_cmd" ++ exit $EXIT_FAILURE + fi + +-# We need to display help for each of the modes. +-case $mode in +-"") $echo \ +-"Usage: $modename [OPTION]... [MODE-ARG]... +- +-Provide generalized library-building support services. +- +- --config show all configuration variables +- --debug enable verbose shell tracing +--n, --dry-run display commands without modifying any files +- --features display basic configuration information and exit +- --finish same as \`--mode=finish' +- --help display this help message and exit +- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] +- --quiet same as \`--silent' +- --silent don't print informational messages +- --version print version information +- +-MODE must be one of the following: +- +- clean remove files from the build directory +- compile compile a source file into a libtool object +- execute automatically set library path, then run a program +- finish complete the installation of libtool libraries +- install install libraries or executables +- link create a library or an executable +- uninstall remove libraries from an installed directory +- +-MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for +-a more detailed description of MODE." +- exit 0 +- ;; +- +-clean) +- $echo \ +-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... +- +-Remove files from the build directory. +- +-RM is the name of the program to use to delete files associated with each FILE +-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +-to RM. +- +-If FILE is a libtool library, object or program, all the files associated +-with it are deleted. Otherwise, only FILE itself is deleted using RM." +- ;; +- +-compile) +- $echo \ +-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE +- +-Compile a source file into a libtool library object. +- +-This mode accepts the following additional options: +- +- -o OUTPUT-FILE set the output file name to OUTPUT-FILE +- -prefer-pic try to building PIC objects only +- -prefer-non-pic try to building non-PIC objects only +- -static always build a \`.o' file suitable for static linking +- +-COMPILE-COMMAND is a command to be used in creating a \`standard' object file +-from the given SOURCEFILE. +- +-The output file name is determined by removing the directory component from +-SOURCEFILE, then substituting the C source code suffix \`.c' with the +-library object suffix, \`.lo'." +- ;; +- +-execute) +- $echo \ +-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... +- +-Automatically set library path, then run a program. +- +-This mode accepts the following additional options: +- +- -dlopen FILE add the directory containing FILE to the library path +- +-This mode sets the library path environment variable according to \`-dlopen' +-flags. +- +-If any of the ARGS are libtool executable wrappers, then they are translated +-into their corresponding uninstalled binary, and any of their required library +-directories are added to the library path. +- +-Then, COMMAND is executed, with ARGS as arguments." +- ;; +- +-finish) +- $echo \ +-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... +- +-Complete the installation of libtool libraries. +- +-Each LIBDIR is a directory that contains libtool libraries. +- +-The commands that this mode executes may require superuser privileges. Use +-the \`--dry-run' option if you just want to see what would be executed." +- ;; +- +-install) +- $echo \ +-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... +- +-Install executables or libraries. +- +-INSTALL-COMMAND is the installation command. The first component should be +-either the \`install' or \`cp' program. +- +-The rest of the components are interpreted as arguments to that command (only +-BSD-compatible install options are recognized)." +- ;; +- +-link) +- $echo \ +-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... +- +-Link object files or libraries together to form another library, or to +-create an executable program. +- +-LINK-COMMAND is a command using the C compiler that you would use to create +-a program from several object files. +- +-The following components of LINK-COMMAND are treated specially: +- +- -all-static do not do any dynamic linking at all +- -avoid-version do not add a version suffix if possible +- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime +- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols +- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) +- -export-symbols SYMFILE +- try to export only the symbols listed in SYMFILE +- -export-symbols-regex REGEX +- try to export only the symbols matching REGEX +- -LLIBDIR search LIBDIR for required installed libraries +- -lNAME OUTPUT-FILE requires the installed library libNAME +- -module build a library that can dlopened +- -no-fast-install disable the fast-install mode +- -no-install link a not-installable executable +- -no-undefined declare that a library does not refer to external symbols +- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects +- -release RELEASE specify package release information +- -rpath LIBDIR the created library will eventually be installed in LIBDIR +- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries +- -static do not do any dynamic linking of libtool libraries +- -version-info CURRENT[:REVISION[:AGE]] +- specify library version info [each variable defaults to 0] +- +-All other options (arguments beginning with \`-') are ignored. +- +-Every other argument is treated as a filename. Files ending in \`.la' are +-treated as uninstalled libtool libraries, other files are standard or library +-object files. +- +-If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +-only library objects (\`.lo' files) may be specified, and \`-rpath' is +-required, except when creating a convenience library. +- +-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +-using \`ar' and \`ranlib', or on Windows using \`lib'. +- +-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +-is created, otherwise an executable program is created." +- ;; +- +-uninstall) +- $echo \ +-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... +- +-Remove libraries from an installation directory. +- +-RM is the name of the program to use to delete files associated with each FILE +-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +-to RM. +- +-If FILE is a libtool library, all the files associated with it are deleted. +-Otherwise, only FILE itself is deleted using RM." +- ;; +- +-*) +- $echo "$modename: invalid operation mode \`$mode'" 1>&2 +- $echo "$help" 1>&2 +- exit 1 +- ;; +-esac ++exit $exit_status + +-echo +-$echo "Try \`$modename --help' for more information about other modes." + +-exit 0 ++# The TAGs below are defined such that we never get into a situation ++# in which we disable both kinds of libraries. Given conflicting ++# choices, we go for a static library, that is the most portable, ++# since we can't tell whether shared libraries were disabled because ++# the user asked for that or because the platform doesn't support ++# them. This is particularly important on AIX, because we don't ++# support having both static and shared libraries enabled at the same ++# time on that platform, so we default to a shared-only configuration. ++# If a disable-shared tag is given, we'll fallback to a static-only ++# configuration. But we'll never go from static-only to shared-only. ++ ++# ### BEGIN LIBTOOL TAG CONFIG: disable-shared ++build_libtool_libs=no ++build_old_libs=yes ++# ### END LIBTOOL TAG CONFIG: disable-shared ++ ++# ### BEGIN LIBTOOL TAG CONFIG: disable-static ++build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` ++# ### END LIBTOOL TAG CONFIG: disable-static + + # Local Variables: + # mode:shell-script + # sh-indentation:2 + # End: ++# vi:sw=2 ++ |