diff options
Diffstat (limited to 'nx-X11/config/cf/host.def')
| -rw-r--r-- | nx-X11/config/cf/host.def | 389 |
1 files changed, 2 insertions, 387 deletions
diff --git a/nx-X11/config/cf/host.def b/nx-X11/config/cf/host.def index 9b482c620..0566befdd 100644 --- a/nx-X11/config/cf/host.def +++ b/nx-X11/config/cf/host.def @@ -46,8 +46,6 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $ /* */ /**************************************************************************/ -#if !defined(NXZaurusXServer) && !defined(NXiPAQXServer) && !defined(DarwinArchitecture) - #if defined(SunArchitecture) #define ProjectRoot /usr/openwin #endif @@ -76,42 +74,6 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $ #define XorgServer NO /* - * To disable building the Xnest server, uncomment this. - * -#define XnestServer NO - */ -#define XnestServer NO - -/* - * To disable building Xvfb, uncomment this. - * -#define XVirtualFramebufferServer NO - */ -#define XVirtualFramebufferServer NO - -/* - * To enable building Xdmx, uncomment this. - * -#define XdmxServer YES - */ -#define XdmxServer NO - -/* - * To disable building Xprt, uncomment this. - * -#define XprtServer NO - */ -#define XprtServer NO - -/* - * Xprint is needed by Xprt. You can disable it if - * you are not going to build Xprt. - * -#define BuildXprint NO - */ -#define BuildXprint NO - -/* * Building libraries with NX enhancements is disabled * by default. You should enable this in your host.def. * @@ -127,18 +89,8 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $ */ #define NXAgentServer YES -/* - * Assume the new build tree. - * -#define NXUpgradeAgentServer NO - */ -#define NXUpgradeAgentServer YES - #ifdef NXAgentServer #define BuildRenderLibrary YES -#define SharedLibFreetype2 YES -#define NormalLibFreetype2 YES -#define FontLibSharedFreeType YES #endif /* @@ -149,7 +101,6 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $ */ #if defined(cygwinArchitecture) #define NXWinServer NO -#define XWinServer NO #endif /* @@ -168,12 +119,10 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $ * #define BuildLibrariesForXServers YES */ -#if XnestServer || NXAgentServer +#if NXAgentServer #define BuildLibraries YES #endif -#define BuildDamageLibrary YES - #define BuildXfixesLibrary YES #define BuildCompositeLibrary YES @@ -185,18 +134,6 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $ #define BuildComposite YES /* - * If you only run the X server under xdm the X servers don't need to be - * installed SetUID, and you may comment out the lines below. If you run - * the servers by hand (with xinit or startx), then they do need to be - * installed SetUID on most platforms. - * - * Consult your system administrator before making the X server setuid. - * -#define InstallXserverSetUID NO - */ - - -/* * Server configuration parameters. The defaults are shown here: */ @@ -245,150 +182,6 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $ */ /* - * There are three parameters that determine where and how the Matrox HAL - * library is used: - * - * HaveMatroxHal -- You have the HALlib.a binary library installed - * in xfree86/drivers/mga/HALlib, and you want it to - * be used. - * Default: NO - * - * BuildMatroxHal -- You have the source for the HALlib library (installed - * in xfree86/drivers/mga/hallib), and want to build and - * use it. - * Default: NO - * - * UseMatroxHal -- You want to build support for loading/using the HAL - * library into the mga driver. For module server builds - * you don't need to have the HALlib library to do this. - * but you want to build support for loading it and using - * it into the mga driver module. - * Default: YES for loadable server build - * (HaveMatroxHal || BuildMatroxHal) for static - */ - -/* - * To disable use of the Matrox HAL library, uncomment this: - * -#define UseMatroxHal NO - */ - -/* - * If you have the HALlib.a binary installed in xfree86/drivers/mga/HALlib, - * uncomment this: - * -#define HaveMatroxHal YES - */ - -/* - * If you have the HALlib source code installed in xfree86/drivers/mga/hallib, - * uncomment this: -#define BuildMatroxHal YES - */ - -/* - * To disable building the font server, uncomment this. - * -#define BuildFontServer NO - */ -#define BuildFontServer NO - -/* - * Speedo fonts have been disabled by default in this release. - * To re-enable support for Speedo fonts, uncomment this. - * -#define BuildSpeedo YES - */ - -/* - * To disable support for CID fonts, uncomment this. - * -#define BuildCID NO - */ - -/* - * To disable support for TrueType fonts, uncomment these. - * -#define BuildFreeType NO - */ -#define BuildFreeType NO - -/* - * To set non-default build options for the underlying FreeType libraries, - * add them here and uncomment. - * -#define Freetype2BuildDefines -DFREETYPE_BUILD_DEFINES - */ - -/* - * To build the FreeType libraries with the TrueType byte code interpreter - * enabled, uncomment this. Note that there are patent issues related to the - * TrueType byte code interpreter, and we only recommend you enabling this - * if you are sure that there are no legal impediments to you doing so. See - * <http://www.freetype.org/patents.html> for further information. - * -#define Freetype2BuildDefines -DTT_CONFIG_OPTION_BYTECODE_INTERPRETER - */ - -/* - * Do you want to Build Fonts (Usually you only want to build and install - * fonts once, if this is a first time install you will want to build the - * fonts) - * -#define BuildFonts NO - */ -#define BuildFonts NO - -/* - * To not build/install the 75dpi fonts, uncomment the following - * -#define Build75DpiFonts NO - */ - -/* - * To not build/install the 100dpi fonts, uncomment the following - * -#define Build100DpiFonts NO - */ - -/* - * To build/install the Speedo fonts, uncomment the following - * (see setting above about Speedo support as well) - * -#define BuildSpeedoFonts YES - */ - -/* - * To not build/install the Type1 fonts, uncomment the following - * -#define BuildType1Fonts NO - */ - -/* - * To not build/install the CID fonts, uncomment the following - * -#define BuildCIDFonts NO - */ - -/* - * To not build/install the True Type fonts, uncomment the following - * -#define BuildTrueTypeFonts NO - */ - -/* - * To not build/install the Cyrillic fonts, uncomment the following - * -#define BuildCyrillicFonts NO - */ - -/* - * To not install the local font directory, uncomment the following - * -#define MakeLocalFontDir NO - */ - -/* * Include True Type Fonts to default font path. It is safe to do * this by default as NX intaller carries only misc and TTF in the * basic set of fonts installed under Windows. @@ -414,25 +207,6 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $ #define BuildServersOnly YES /* - * By default, the sample config files for xinit, xdm and xfs are installed - * only when there is no pre-existing version installed. Uncommenting the - * following lines will force the sample versions to be installed even if - * it means over-writing existing versions. - * -#define InstallXinitConfig YES -#define InstallXdmConfig YES -#define InstallFSConfig YES - */ - -/* - * By default the application defaults files are always installed. - * Uncommenting the the following will prevent exising application - * defaults files from being over-written. - * -#define InstallAppDefFiles NO - */ - -/* * Undefine the following if you don't want to have config files and * app-defaults installed in a separate directory (i.e. /etc/X11). * @@ -645,21 +419,6 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $ */ /* - * To link the X server with a dynamic version of the Xfont library, - * uncomment this. - * -#define XserverStaticFontLib NO - */ -#define XserverStaticFontLib YES - -/* - * To enable binary compatibility with previous versions of the font - * encoding support, uncomment this. - * -#define FontencCompatibility YES - */ - -/* * To disable building XInput support, uncomment this * #define BuildXInputExt NO @@ -725,13 +484,6 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $ */ #define BuildXF86RushLibrary NO -/* - * We should never need LBX in a NX enabled environment... - * -#define BuildLBX NO - */ -#define BuildLBX NO - #define BuildXKB YES #define BuildXKBlib YES @@ -786,7 +538,7 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $ /* * To build static and shared libraries with debugging information, uncomment * this. Assumes you have Gcc2. - * (If you don't have Gcc2, you can use the DebugLib{X11,Xt,Xaw,...} variables + * (If you don't have Gcc2, you can use the DebugLib{X11,...} variables * to build debugging versions of the libraries separately.) * #define DebuggableLibraries YES @@ -887,144 +639,7 @@ XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $ #define X86EMU_LIBPATH /usr/local/lib */ -/* - * Most platforms default to using an already installed FreeType 2 library. - * To use the one included in this release instead, uncomment the following. - * -#define HasFreetype2 NO - */ -#define HasFreetype2 YES - -/* - * To use a FreeType library already installed outside the default search - * paths, uncomment the following and set the path as needed. - * -#define HasFreetype2 YES -#define Freetype2Dir /usr/local - */ - - -/* - * Most platforms default to using an already installed Fontconfig library. - * To use the one included in this release instead, uncomment the following. - * -#define HasFontconfig NO - */ -#define HasFontconfig YES - -/* - * To use a Fontconfig library already installed outside the default search - * paths, uncomment the following and set the path as needed. -#define HasFontconfig YES -#define FontconfigDir /usr/local - */ - - -/* - * Most platforms default to using an already installed Expat library. - * To use the one included in this release instead, uncomment the following. - * -#define HasExpat NO - */ -#define HasExpat YES - -/* - * To use a Expat library already installed outside the default search - * paths, uncomment the following and set the path as needed. -#define HasExpat YES -#define ExpatDir /usr/local - */ - - -/* - * Most platforms default to using an already installed PNG library. - * To use the one included in this release instead, uncomment the following. - * -#define HasLibpng NO - */ - -/* - * To use a PNG library already installed outside the default search - * paths, uncomment the following and set the path as needed. -#define HasLibpng YES -#define LibpngDir /usr/local - */ - - -/* - * Most platforms default to using an already installed xterm program. - * To use the one included in this release instead, uncomment the following. - * -#define BuildXterm YES - */ - #define SharedLibXau YES -#define SharedLibXdmcp YES - -#define BuildXaw7 NO - -#else /* #if !defined(NXZaurusXServer) && !defined(NXiPAQXServer) && !defined(DarwinArchitecture) */ - -#if defined(DarwinArchitecture) && !defined(NXZaurusXServer) && !defined(NXiPAQXServer) -#define NXDarwinServer NO -#define BuildServersOnly YES -#define DefaultFontPath /usr/NX/share/fonts/misc/,/usr/NX/share/fonts/TTF/ -#define DefaultRGBDatabase /usr/NX/share/rgb -#define XprtServer NO -#define BuildXprint NO -#define XnestServer NO -#define XVirtualFramebufferServer NO -#define BuildFontServer NO -#define BuildFreeType NO -#define BuildXTrueType NO -#define FontLibSharedFreeType YES -#endif - -#if !defined(NXZaurusXServer) && defined(NXiPAQXServer) -#define KDriveXServer YES -#define XiPAQH3500Server YES -#define BuildServersOnly YES -#define NXEmbeddedXServer YES -#define KdriveServerExtraDefines -DITSY -DMAXSCREENS=1 -#define TinyXServer YES -#define CrossCompiling YES -#define TouchScreen YES -#define ItsyCompilerBug YES -#undef BuildRandR -#define BuildRandR YES -#define BuildXInputLib YES -#define BuildXTrueType YES -#define ServerXdmcpDefines -#define XipaqServer YES -#endif - -#if !defined(NXiPAQXServer) && defined(NXZaurusXServer) -#define KDriveXServer YES -#define XiPAQH3500Server YES -#define BuildServersOnly YES -#define ZaurusXServer YES -#define NXEmbeddedXServer YES -#define KdriveServerExtraDefines -DITSY -DMAXSCREENS=1 -#define TinyXServer YES -#define CrossCompiling YES -#define TouchScreen YES -#define ItsyCompilerBug YES -#undef BuildRandR -#define BuildRandR YES -#define BuildXInputLib YES -#define BuildXTrueType YES -#define ServerXdmcpDefines -#define XipaqServer YES -#define XfbdevServer YES -#endif - -#endif /* #if !defined(NXZaurusXServer) && !defined(NXiPAQXServer) && !defined(DarwinArchitecture) */ - #define BuildRman NO -#define BuildFontEncLib NO -#define BuildXcursorLibrary NO -#define BuildXftLibrary NO -#define BuildXft1Library NO -#define SharedLibFont NO #define BuildLoadableXlibI18n NO |