aboutsummaryrefslogtreecommitdiff
path: root/nx-X11/config/cf/sequent.cf
diff options
context:
space:
mode:
Diffstat (limited to 'nx-X11/config/cf/sequent.cf')
-rw-r--r--nx-X11/config/cf/sequent.cf444
1 files changed, 0 insertions, 444 deletions
diff --git a/nx-X11/config/cf/sequent.cf b/nx-X11/config/cf/sequent.cf
deleted file mode 100644
index 99ba9b461..000000000
--- a/nx-X11/config/cf/sequent.cf
+++ /dev/null
@@ -1,444 +0,0 @@
-XCOMM platform: $XConsortium: sequent.cf$
-
-/*
- * SET VERSION NUMBERS BEFORE MAKING MAKEFILES; also, you'll need to install
- * util/scripts/bsdinstall.sh before doing a "make install"
- */
-
-/*
- * Version numbers are set one of two ways:
- *
- * If the target version is different than the machine you are building on,
- * set the target versions using the environmental variable IMAKEINCLUDES.
- * Example: IMAKEINCLUDES="-I. -DOSMajorVersion=4 -DOSMinorVersion=4"
- * This is usually only done at Sequent when building a product using
- * cross compiling tools and target headers and libraries.
- *
- * Otherwise, the imake will use uname(2) to calculate the default to be
- * the same as the machine you are building on. The X11R6 imake will set
- * DefaultOS*Version macros to be these default values.
- * Those default values will be used in the assignments below.
- * This is the recommended method to be used by customers.
- */
-
- /* defaults from imake via uname(2) */
-#ifndef OSName
-#define OSName DefaultOSName
-#endif
-#ifndef OSMajorVersion
-#define OSMajorVersion DefaultOSMajorVersion
-#endif
-#ifndef OSMinorVersion
-#define OSMinorVersion DefaultOSMinorVersion
-#endif
-#ifndef OSTeenyVersion
-#define OSTeenyVersion DefaultOSTeenyVersion
-#endif
-XCOMM operating system: OSName V/**/OSMajorVersion./**/OSMinorVersion./**/OSTeenyVersion
-
-/*
- * Sequent Dynix/PTX 4.x.x (SVR4) and later operating systems.
- *
- * Sequent Dynix/PTX 4.2.3 and later operating systems are supported with
- * the X11R6 sequent.cf and other X11R6 configuration files.
- * Specifically 4.4.2 and later have been tested.
- *
- * Attempting to use these X11R6 configuration files and X11R6 source files
- * with early versions of Dynix/PTX 4.x.x may work, however that will not be
- * tested or supported at Sequent.
- * Sequent Dynix/PTX 2.1.x has been retired so support for it and earlier
- * releases has been removed.
- */
-
-#if OSMajorVersion >= 4
-
-#define SystemV4 YES
-#define SequentVersionDefines -DSVR4
-#define ExtraLibraries
-#define ForceNormalLib YES
-#define HasRequiredLibs YES
-#define NeedBerklib NO /* gettimeofday in libc */
-
-#define XmExtraLibraries /* for ABI-compliance do not use -lgen here */
-#define MotifDefines -DXM_STRINGS_1_2_2_STATE /* code review */
-
-/* initial port does not use multiple socket libs, default libsocket.so.1.1 */
-#define HasMultipleSockets NO /* obsolete */ /* only libsocket.so.1.1 */
-
-#endif /* OSMajorVersion >= 4 */
-
-/*
- * Below this line are generic defines that apply to all Sequent systems.
- * However they are currently tested with only OSMajorVersion >= 4
- */
-
-/*
- * The following cpp macro defines are order independent,
- * since the right-hand-side is constant.
- * Therefore these are simply listed in alphabetical order.
- * Macros defined later may use these definitions.
- */
-
-/*
- * Threads.tmpl cpp macros.
- * Sequent overrides the Threads.tmpl defaults with the values below.
- * Sequent has native threads for ptx 4.5.0 and higher.
- */
-
-#if ( OSMajorVersion >= 5 || (OSMajorVersion == 4 && OSMinorVersion >= 5) )
-
-#define HasPosixThreads YES
-#define HasThreadSafeAPI YES
-#define ThreadedX YES
-#define ThreadsLibraries /**/
-#define ThreadsCplusplusLibraries /**/
-#define ThreadPreStdAPIDefines /**/
-#define ThreadsCompileFlags -Kthread
-#define ThreadsCplusplusCompileFlags -Kthread
-#define SharedThreadReqs /**/
-
-/*
- * THREADS macro and environment variable used with Sequent commands only.
- * We use THREADS rather than the generic X11 THREADS_CFLAGS because we
- * want to ensure that the macro is defined for all compiles and not just
- * those Makefiles built from a Imakefile that includes Threads.tmpl.
- *
- * Sequent compiler option -Kthread will also define -D_SEQUENT_THREADS.
- * Currently using -Kthread is the recommended interface to this define.
- * Currently there are no extra includes files using -D_SEQUENT_THREADS.
- * Currently no reason for makedepend or cpp to use -D_SEQUENT_THREADS.
- * If needed in the future, we would add to ProjectThreadsDefines
- *
- * #define ProjectThreadsDefines -DXTHREADS -D_SEQUENT_THREADS
- */
-
- THREADS = -Kthread
-
-#endif /* ptx 4.5.0 or greater has threads */
-
-/*
- * Imake.tmpl cpp macros.
- * Sequent overrides the Imake.tmpl defaults with the values below.
- */
-
-#define BuildLibPathVar LD_LIBRARY_PATH
-#define DefaultCCOptions -Xa
-#define ExpandManNames YES
-#define ExtraFilesToClean *.z
-#define HasNdbm YES
-#define HasShadowPasswd YES
-#define HasSockets YES /* default */
-#define HasVarDirectory NO
-#ifdef UseInstalled
-#define InstallCmd $(BINDIR)/ptxinst -t "$(TOOLS)"
-#else
-#define InstallCmd $(SHELL) $(SCRIPTSRC)/ptxinst.sh
-#endif /* UseInstalled */
-#define InstPgmFlags -s -m 0555 -o bin -g bin
-#define InstBinFlags -s -m 0555 -o bin -g bin
-#define InstLibFlags -m 0444 -o bin -g bin
-#define InstShLibFlags -m 0555 -o bin -g bin
-#define Malloc0ReturnsNull YES
-#define ManSuffix 1 /* use just one tab or cpp will die */
-#define LibManSuffix 3x /* use just one tab or cpp will die */
-#define LibmanDir $(MANSOURCEPATH)3
-#define MiscManSuffix 5x /* use just one tab or cpp will die */
-#define MiscManDir $(MANSOURCEPATH)5
-#define MkdirHierCmd mkdir -p
-#define NeedConstPrototypes YES
-#define NeedFunctionPrototypes YES
-#define NeedNestedPrototypes YES
-#define NeedVarargsPrototypes YES
-#define StripInstalledPrograms YES
-#define SystemManDirectory /usr/catman
-#define TermcapLibrary -lcurses /* code review for SVR4 ? */
-#define TerminfoDir /usr/lib/terminfo /* Sequent addition */
-#define ToolkitStringsABIOptions -intelabi
-
-
-/*
- * X11.tmpl cpp macros.
- * Sequent overrides the X11.tmpl defaults with the values below.
- */
-
-#define BuildDps YES
-#define BuildServer YES
-#define BuildXF86DGA NO /* DGA has no meaning on Sequent HW */
-#define BuildXF86MiscExt NO /* turn off the server portion */
-#define BuildXF86VidModeExt NO /* turn off the server portion */
-#define BuildXInputExt YES
-#define BuildXKBuilib YES /* override NO set in xorg.cf */
-#define ConnectionFlags -DTCPCONN
-#define DefaultSystemPath /bin:/etc:/usr/bin:$(BINDIR)
-#define DefaultUserPath :/bin:/usr/bin:$(BINDIR)
-#define HasPlugin YES
-#define HasXServer NO
-#define InstallFSConfig YES /* safe since we install to DESTDIR */
-#define InstallXdmConfig YES /* safe since we install to DESTDIR */
-#define MotifBC NO /* default, code review from X11R5 */
-#define XdmServersType fs /* One tab here. Needed if BuildServer YES */
-#define XtMalloc0ReturnsNullDefines Malloc0ReturnsNullDefines -DXTMALLOC_BC
-#define XprtServer YES
-#define XVirtualFramebufferServer YES
-#define XF86SVGAServer NO /* Don't build the XFree86 servers */
-#define XF86S3Server NO
-#define XF86S3VServer NO
-#define XF86I8514Server NO
-#define XF86Mach8Server NO
-#define XF86Mach32Server NO
-#define XF86Mach64Server NO
-#define XF86P9000Server NO
-#define XF86AGXServer NO
-#define XF86I128Server NO
-#define XF86GLINTServer NO
-#define XF86REALimageServer NO
-
-/*
- * Motif.tmpl cpp macros.
- * Sequent overrides the Motif.tmpl default with the values below.
- */
-
-#define GencatCmd /usr/lbin/gencat
-
-/* Port Sequent macro DontBuildMotifConfig to Motif 2.1 */
-/*
- * #ifndef MetroLink
- * #define DontBuildMotifConfig
- * #endif
- */
-
-/*
- * Sequent added cpp macros.
- *
- * The following cpp macro defines have been introduced by Sequent.
- * They will be referenced in Sequent patches sent to TOG.
- * They may be moved above if accepted by TOG or X.org.
- */
-
-#define AdminBaseDir /usr/admin.ptx/etc/base.dir
-#define MessageCatDir /usr/lib/message/C
-#define NeedXinputAlias YES
-#define UseHidesymsLists YES
-#define XlbiffMailPath /usr/mail/%s /* used by contrib xlbiff */
-
-/*
- * Imake.tmpl, X11.tmpl, or other order dependent cpp defines.
- *
- * The following cpp macro defines are order dependent.
- * They depend on previously defined cpp macros.
- * Do not change the order.
- */
-#define SharedLibraryCCOptions DefaultCCOptions
-#define StandardDefines SequentVersionDefines -DOSMAJORVERSION=OSMajorVersion -DOSMINORVERSION=OSMinorVersion -DANSICPP -DDYNIX_C2 -DMetroLink
-#define StandardCppDefines StandardDefines -D_SOCKET_VERSION=11 -DUnixCpp
-
-#ifdef ProjectRoot
-#define ManDirectoryRoot ProjectRoot/**//catman
-#else
-#define ManDirectoryRoot SystemManDirectory
-#endif
-#define XmanSearchPath ManDirectoryRoot /* for X11R5 xman */
-
-/*
- * Sequent configuration environment specific to building X11 and Motif.
- * This environment is only available when UseInstalled is not defined.
- * Therefore this environment is not used by customers using xmkmf.
- */
-
-#ifndef UseInstalled
-
-/* Product builds using local X11 and Motif trees */
-
-/*
- * Provide libraries needed by nonX programs in the X11 build tree.
- * These are not standard so the customer will be forced to add them to their
- * Imakefile SYS_LIBRARIES if needed. An ABI program may not want or need them,
- * so we do not include them in the ExtraLibraries provided to customers
- * when UseInstalled is defined. We add them here as a convenience when
- * building the entire X11 tree (at Sequent or the contractor).
- */
-#undef ExtraLibraries
-#define ExtraLibraries -lsocket -lnsl
-
-/*
- * Sequent builds X11 and Motif in the same tree.
- * The Motif project files include the X11 project files.
- *
- * Later we may use the Local project files similer the the lynx.cf
- *
- * #define LocalTmplFile <Motif.tmpl>
- * #define LocalRulesFile <Motif.rules>
- */
-
-/* Try the Metro Link method. */
-
-#ifndef MetroLink
-#undef ProjectTmplFile
-#define ProjectTmplFile <Motif.tmpl>
-#undef ProjectRulesFile
-#define ProjectRulesFile <Motif.rules>
-#endif
-
-/*
- * Later change to Metro Link directory layout,
- * or allow $(TOP)/../motif21
- */
-
-/* Try the Metro Link method. */
-
-#ifndef MetroLink
-#define MTop $(TOP)/motif21
-#endif
-
-/*
- * Set the Program macros to be correct for the target machine.
- * This will avoid using any crosstools as hardwired strings
- * built into binaries that will run on the target machine.
- *
- * These macro names need to be ported from X11R5 to X11R6.
- */
-#define ArProgramBase ar
-#define CppProgram /lib/cpp
-#define CcProgram cc
-#define RanlibProgram ranlib
-
-/*
- * Build all the X11 debug libaries *_d.a for use by Sequent Service
- */
-
-/*
- * Set DebugLibDefault YES for Sequent to build all debug libs.
- * If we move this to generic code to *.tmpl files,
- * use the default code below that sets the default NO
- */
-
-#define DebugLibDefault NO
-
-#ifndef DebugLibDefault
-#define DebugLibDefault NO
-#endif
-
-#define DebugLibX11 DebugLibDefault /* debugged X library */
-#define DebugLibXext DebugLibDefault /* debugged Xext library */
-#define DebugLibXau DebugLibDefault /* debugged auth library */
-#define DebugLibXdmcp DebugLibDefault /* debugged XDMCP library */
-#define DebugLibXmu DebugLibDefault /* debugged Xmu library */
-#define DebugLibXp DebugLibDefault /* debugged Xp library */
-#define DebugLibXt DebugLibDefault /* debugged toolkit library */
-#define DebugLibXa DebugLibDefault /* debugged audio library */
-#define DebugLibXaw DebugLibDefault /* debugged widget library */
-#define DebugLibXi DebugLibDefault /* debugged Xi library */
-#define DebugLibXtst DebugLibDefault /* debugged Xtst library */
-#define DebugLibICE DebugLibDefault /* debugged ICE library */
-#define DebugLibSM DebugLibDefault /* debugged SM library */
-#define DebugLibXkey DebugLibDefault /* debugged Xkey library */
-#define DebugLibFS DebugLibDefault /* debugged FS library */
-
-/*
- * Build all the Motif debug libaries *_d.a for use by Service
- */
-#define DebugLibXm DebugLibDefault
-#define DebugLibMrm DebugLibDefault
-#define DebugLibUil DebugLibDefault
-
-/*
- * Build all the Adobe DPS debug libaries *_d.a for use by Service
- */
-#define DebugLibDps DebugLibDefault
-
-#endif /* ! UseInstalled */
-
-/*
- * Sequent general make macros.
- * X11R6.5 should migrate these to Imake.tmpl.
- */
-
-XCOMM Sequent general make macros.
-
-#ifndef PackCmd
-#define PackCmd pack
-#endif
- PACK = PackCmd
-
-/*
- * Sequent unique make macros. These will always be unique to Sequent.
- * We introduce them here in sequent.cf since cpp macros are set in sequent.cf.
- * We may later move them to sequentLib.tmpl.
- */
-
-XCOMM Sequent unique make macros.
-
- ADMINBASEDIR = AdminBaseDir
- MESSAGECATDIR = MessageCatDir
-
-/*
- * DPS default values (unique to sequent)
- */
-#ifndef PswrapCmd
-#define PswrapCmd pswrap
-#endif
-
-#ifdef UseHidesymsLists
-
-#ifndef HidesymsCmd
-#define HidesymsCmd /usr/lib/hidesyms/hidesyms
-#endif
-#ifndef HsAcppCmd
-#define HsAcppCmd /lib/acpp
-#endif
-/*
- * When building in the X11 tree.
- * For shared libs, hidesyms executes in a subdir.
- * For unshared libs, hidesyms executes in a subsubdir.
- * Therefore we add both of these to the acpp path:
- * ../../$(BUILDINCROOT)/lib/hidesyms:../$(BUILDINCROOT)/lib/hidesyms
- */
-#ifndef HsAcppLocalPath
-# define HsAcppLocalPath ../../$(BUILDINCROOT)/lib/hidesyms:../$(BUILDINCROOT)/lib/hidesyms
-#endif
-#ifndef HsAcppSystemPath
-# define HsAcppSystemPath /usr/lib/hidesyms
-#endif
-#ifndef HsAcppPath
-# ifdef UseInstalled
-# define HsAcppPath HsAcppSystemPath
-# else
-# define HsAcppPath HsAcppLocalPath:HsAcppSystemPath
-# endif /* UseInstalled */
-#endif
-/*
- * note: -DABI_SHARED_OBJECT requires a temporary fix added to
- * Xt/Error.c to provide missing _abi_* routines not in libc.so.1.
- * When the base adds those missing _abi_* to libc.so.1,
- * then the code in Xt/Error.c can be removed and the corresponding
- * symbols added to Xt/libXt.hs can be removed.
- */
-#ifndef HsAcppDefines
-#define HsAcppDefines -DABI_SHARED_OBJECT -D_SOCKET_VERSION=11 $(THREADS_DEFINES)
-#endif
-
-/*
- * For shared libs, hidesyms executes in a subdir,
- * therefore we add a -L../$(BUILDLIBDIR)
- */
-#ifndef LdPreLib
-#ifndef UseInstalled
-#define LdPreLib -L$(BUILDLIBDIR) -L../$(BUILDLIBDIR)
-#endif
-#endif
-
-XCOMM HIDESYMS is for filtering system library symbols.
-
- HIDESYMS = HidesymsCmd
- HSACPPPATH = HsAcppPath
- HSACPPCMD = HsAcppCmd
- HSACPPDEFINES = HsAcppDefines
- HSACPP = $(HSACPPCMD) -Y $(HSACPPPATH) $(HSACPPDEFINES)
- HSCMD = $(HIDESYMS) -z -p "$(HSACPP)"
-
-#endif /* UseHidesymsLists */
-
-#if OSMajorVersion >= 4
-#include <xorg.cf>
-#include <sequentLib.rules> /* include after macros, before Motif.rules */
-#endif /* OSMajorVersion >= 4 */