diff options
Diffstat (limited to 'nx-X11/config/cf/xorgsite.def')
| -rw-r--r-- | nx-X11/config/cf/xorgsite.def | 768 |
1 files changed, 768 insertions, 0 deletions
diff --git a/nx-X11/config/cf/xorgsite.def b/nx-X11/config/cf/xorgsite.def new file mode 100644 index 000000000..dea5ceb92 --- /dev/null +++ b/nx-X11/config/cf/xorgsite.def @@ -0,0 +1,768 @@ +XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $ +/******************************************************************************/ +/* + * This file is to provide a quick method for most people to change the + * behaviour of their Xorg installation without having to fully + * understand the workings of site.def and all the various '.cf' files. + * + * In the vast majority of cases, it should not be necessary to use this + * file at all or change it in any way. + * + * This file is divided into two sections. The first contains settings + * that end-users might reasonably change. The second contains settings + * that developers might want to change. + * + * IMPORTANT NOTE: In all cases changing the defaults may cause problems + * and/or unexpected side-effects. If you don't understand what a setting + * does, then it's best to not change it. If you make changes and have + * problems, verify that those problems are also present when using an + * empty host.def file and unchanged version of this file before reporting + * them. + * + * A good way to use this file is to copy it to host.def, and make the + * changes there. That way, future patches to this file won't fail. + * The host.def file will never be patched. + * + * The distributed version of this file MUST contain no uncommented + * definitions. Default definitions belong in xorg.cf, or <vendor>.cf + * files. + */ +/******************************************************************************/ + +/* + * If you have build-specific modifications in your host.def file, but + * want an empty host.def file installed when doing 'make install', + * uncomment the following + * +#define InstallEmptyHostDef + */ + +/* + * Which servers to build. There is only Xorg server. + * It can be disabled by the following. + * +#define XorgServer NO + */ + +/* + * To disable building the Xnest server, uncomment this. + * +#define XnestServer NO + */ + +/* + * To disable building Xvfb, uncomment this. + * +#define XVirtualFramebufferServer NO + */ + +/* + * To enable building Xdmx, uncomment this. + * +#define XdmxServer YES + */ + +/* + * To disable building Xprt, uncomment this. + * +#define XprtServer NO + */ + +/* + * Set the default server (ie the one that gets the sym-link to "X") + * +#define ServerToInstall Xorg + */ + +/* + * If you only run the X server under xdm the X servers don't need to be + * installed SetUID, and you may comment out the lines below. If you run + * the servers by hand (with xinit or startx), then they do need to be + * installed SetUID on most platforms. + * + * Consult your system administrator before making the X server setuid. + * +#define InstallXserverSetUID NO + */ + + +/* + * Server configuration parameters. The defaults are shown here: + */ + +/* + * Which drivers to build. When building a static server, each of these + * will be included in it. When building the loadable server each of these + * modules will be built. + * +#define XF86CardDrivers mga glint nv tga s3virge sis rendition \ + neomagic i740 tdfx savage \ + cirrus vmware tseng trident chips apm \ + GlideDriver fbdev i128 \ + ati DevelDrivers ark cyrix \ + siliconmotion \ + vesa vga XF86OSCardDrivers XF86ExtraCardDrivers + */ + +/* + * To add third party drivers to the standard driver list, set the + * following. + * +#define XF86ExtraCardDrivers extradriver1 extradriver2 ... + */ + +/* + * Select the XInput devices you want by uncommenting this. + * +#define XInputDrivers mouse keyboard acecad calcomp citron \ + digitaledge dmc dynapro elographics \ + microtouch mutouch penmount spaceorb summa \ + wacom void magictouch aiptek + */ + +/* To enable building of development DRI drivers (insecure, or not + * useful on the chosen architecture, uncomment this define. +#define BuildDevelDRIDrivers YES + */ + +/* + * To use the deprecated, old keyboard driver, uncomment this. But + * even better, make the new keyboard driver (hw/xfree86/input/keyboard) + * work for your architechture. The old driver will be removed in the + * next release. + * +#define UseDeprecatedKeyboardDriver YES + */ + +/* + * There are three parameters that determine where and how the Matrox HAL + * library is used: + * + * HaveMatroxHal -- You have the HALlib.a binary library installed + * in xfree86/drivers/mga/HALlib, and you want it to + * be used. + * Default: NO + * + * BuildMatroxHal -- You have the source for the HALlib library (installed + * in xfree86/drivers/mga/hallib), and want to build and + * use it. + * Default: NO + * + * UseMatroxHal -- You want to build support for loading/using the HAL + * library into the mga driver. For module server builds + * you don't need to have the HALlib library to do this. + * but you want to build support for loading it and using + * it into the mga driver module. + * Default: YES for loadable server build + * (HaveMatroxHal || BuildMatroxHal) for static + */ + +/* + * To disable use of the Matrox HAL library, uncomment this: + * +#define UseMatroxHal NO + */ + +/* + * If you have the HALlib.a binary installed in xfree86/drivers/mga/HALlib, + * uncomment this: + * +#define HaveMatroxHal YES + */ + +/* + * If you have the HALlib source code installed in xfree86/drivers/mga/hallib, + * uncomment this: +#define BuildMatroxHal YES + */ + +/* + * To disable building the font server, uncomment this. + * +#define BuildFontServer NO + */ + +/* + * Speedo fonts have been disabled by default in this release. + * To re-enable support for Speedo fonts, uncomment this. + * +#define BuildSpeedo YES + */ + +/* + * To disable support for CID fonts, uncomment this. + * +#define BuildCID NO + */ + +/* + * To disable support for TrueType fonts, uncomment these. + * +#define BuildFreeType NO + */ + +/* + * To set non-default build options for the underlying FreeType libraries, + * add them here and uncomment. + * +#define Freetype2BuildDefines -DFREETYPE_BUILD_DEFINES + */ + +/* + * To build the FreeType libraries with the TrueType byte code interpreter + * enabled, uncomment this. Note that there are patent issues related to the + * TrueType byte code interpreter, and we only recommend you enabling this + * if you are sure that there are no legal impediments to you doing so. See + * <http://www.freetype.org/patents.html> for further information. + * +#define Freetype2BuildDefines -DTT_CONFIG_OPTION_BYTECODE_INTERPRETER + */ + +/* + * Do you want to Build Fonts (Usually you only want to build and install + * fonts once, if this is a first time install you will want to build the + * fonts) + * +#define BuildFonts NO + */ + +/* + * To not build/install the 75dpi fonts, uncomment the following + * +#define Build75DpiFonts NO + */ + +/* + * To not build/install the 100dpi fonts, uncomment the following + * +#define Build100DpiFonts NO + */ + +/* + * To build/install the Speedo fonts, uncomment the following + * (see setting above about Speedo support as well) + * +#define BuildSpeedoFonts YES + */ + +/* + * To not build/install the Type1 fonts, uncomment the following + * +#define BuildType1Fonts NO + */ + +/* + * To not build/install the CID fonts, uncomment the following + * +#define BuildCIDFonts NO + */ + +/* + * To not build/install the True Type fonts, uncomment the following + * +#define BuildTrueTypeFonts NO + */ + +/* + * To not build/install the Cyrillic fonts, uncomment the following + * +#define BuildCyrillicFonts NO + */ + +/* + * To not install the local font directory, uncomment the following + * +#define MakeLocalFontDir NO + */ + +/* + * To build only the servers with a cut-down source tree, uncomment + * this. + * +#define BuildServersOnly YES + */ + +/* + * By default, the sample config files for xinit, xdm and xfs are installed + * only when there is no pre-existing version installed. Uncommenting the + * following lines will force the sample versions to be installed even if + * it means over-writing existing versions. + * +#define InstallXinitConfig YES +#define InstallXdmConfig YES +#define InstallFSConfig YES + */ + +/* + * By default the application defaults files are always installed. + * Uncommenting the the following will prevent exising application + * defaults files from being over-written. + * +#define InstallAppDefFiles NO + */ + +/* + * Undefine the following if you don't want to have config files and + * app-defaults installed in a separate directory (i.e. /etc/X11). + * +#define UseSeparateConfDir NO + */ + +/* + * To enable building the glide driver, you need to define + * HasGlide2 to YES and set the Glide2IncDir variable. + * HasGlide2 is per default NO. + * +#define HasGlide2 YES + */ + +/* + * Set the path to your Glide include files. + * +#define Glide2IncDir /usr/include/glide + */ + +/* + * Have glide 3? + * +#define HasGlide3 YES + */ + +/* + * Set the path to your Glide 3 include files. + * +#define Glide3IncDir /usr/include/glide3 + */ + + + +/* + * Unless you're a developer you shouldn't need to change anything + * beyond this point. + */ + +/* + * If you want to enable some developer settings, like more verbose + * compiler warnings, uncomment this. + * +#define XFree86Devel YES +*/ + +/* + * The default optimisation flags for GCC 2.x. -fno-strength-reduce is + * here to work around a bug in -O2 for GCC 2.x on i386 platforms. + * If you are using a version that doesn't have this bug, you can + * uncomment the following line, and remove '-fno-strength-reduce' + * If you are building binaries for a 486, it may be beneficial to add + * -m486 + * +#define DefaultGcc2i386Opt -O2 -fno-strength-reduce + */ + +/* + * This allows the GCC warning flags to be set. The default is shown here. + * +#define GccWarningOptions -Wall -Wpointer-arith -Wstrict-prototypes \ + -Wmissing-prototypes -Wmissing-declarations \ + -Wredundant-decls -Wnested-externs + */ + +/* + * Sun Compiler stuff.. + * +#define HasSunC YES +#define HasSunCplusplus YES +#define CplusplusCompilerMajorVersion 5 +#define CplusplusCompilerMinorVersion 0 +#define CCompilerMajorVersion 5 +#define CCompilerMinorVersion 0 + */ + +/* + * Optimized Sun Compiler Build. + * +#define DefaultCDebugFlags -xO4 -xtarget=pentium_pro +#define OptimizedCDebugFlags -xO4 -xtarget=pentium_pro + */ + +/* + * Debuggable Sun Compiler Build. + * Note: This builds _EVERYTHING_ as debuggable + * +#define DefaultCDebugFlags -g -xs +#define OptimizedCDebugFlags -g -xs + */ + +/* + * For Linux, this should match the Binutils version you have. This example + * is for 2.6.0.7. See linux.cf for the default setting. + * + * This should automatically get set correctly by imake. + * +#define LinuxBinUtilsMajorVersion 26 + */ + +/* + * For Linux, these should match the libc version you have. This example + * is for libc.5.4.x. See linux.cf for the default setting. + * + * This should automatically get set correctly by imake. + * +#define LinuxCLibMajorVersion 5 +#define LinuxClibMinorVersion 4 + */ + +/* + * If you want to use the GNU malloc library, uncomment this + * +#define UseGnuMalloc YES + */ + +/* + * Set this to whatever is required to access the GNU malloc library. + * The default is '-lgmalloc' unless is specified in the OS's .cf file. + * +#define GnuMallocLibrary -L/usr/local/lib -lgmalloc + */ + +/* + * To enable the internal Xserver malloc, uncomment this + * +#define UseInternalMalloc YES + */ + +/* + * Some Linux releases don't have a libtermcap. In this case you may need + * to uncomment the following + * +#define TermcapLibrary -lncurses + */ + +/* + * Build a server that dynamically loads the modules by setting + * this to YES. This defaults to YES on most platforms. A static server + * can be built by setting this to NO. + * +#define DoLoadableServer NO + */ + +/* + * This release defaults to building dlopen() style modules instead of the + * previously standard loader modules. + * + * Uncomment the following to return to the XFree86 custom loader modules. + * +#define MakeDllModules NO + */ + +/* + * Build XAA. This can be disabled with: + * +#define XF86XAA NO + */ + +/* + * Build vgahw. This can be disabled with: + * +#define XF86VgaHw NO + */ + +/* + * Build xf1bpp. This can be disabled with: + * +#define XF1Bpp NO + */ + +/* + * Build xf4bpp. This can be disabled with: + * +#define XF4Bpp NO + */ + + +/* + * BSD Console driver support (for FreeBSD and NetBSD). + * + * By default, support is included for pccons and pcvt for NetBSD, and + * pccons, syscons and pcvt for FreeBSD. + * + * To change the list of supported drivers, set the following parameter. + * Possible values are -DPCCONS_SUPPORT, -DSYSCONS_SUPPORT, -DPCVT_SUPPORT. + * The following example includes support for syscons and pcvt only. + * +#define XFree86ConsoleDefines -DSYSCONS_SUPPORT -DPCVT_SUPPORT + */ + +/* + * To link the X server with a dynamic version of the Xfont library, + * uncomment this. + * +#define XserverStaticFontLib NO + */ + +/* + * To enable binary compatibility with previous versions of the font + * encoding support, uncomment this. + * +#define FontencCompatibility YES + */ + +/* + * To disable building XInput support, uncomment this + * +#define BuildXInputExt NO + */ + +/* + * Uncomment this for joystick support. + * + * Note: Joystick support is broken, so don't enable this. + * +#define JoystickSupport YES + */ + +/* + * To disable the ScreenSaver Extension, uncomment this line. + * +#define BuildScreenSaverExt NO + */ + +/* + * If you don't want to build Xinerama support, uncomment this. + * +#define BuildXinerama NO + */ + +/* + * If you don't want to build support for the GLX extension, uncomment this. + * +#define BuildGlxExt NO + */ + +/* + * If you want to build the xf86rush extension, uncomment this line. + * This isn't recommended. + * +#define BuildXF86RushExt YES + */ + +/* + * If you want to build the client library for the xf86rush extension, + * uncomment this line. This isn't recommended. + * +#define BuildXF86RushLibrary NO + */ + +/* + * If you are running NetBSD 0.9C or later, and have the aperture driver + * installed, uncomment this. + * +#define HasNetBSDApertureDriver YES + */ + +/* + * If you are running SVR3 and have the mmap driver installed (for linear + * framebuffer access) uncomment this. + * +#define HasSVR3mmapDrv YES + */ + +/* + * If you are using an SVR3 (like ISC 4.x) which supports long file names, + * you can uncomment this to have manual pages installed under their + * full names + * +#define ExpandManNames YES + */ + +/* + * For a POSIXized build on Interactive uncomment this + * Could be used with gcc 'till Version 2.6.3 + * Should be used with gcc 2.7.2. + * +#define UsePosix YES + */ + +/* + * If you don't want XDMAUTH support (if you don't have Wraphelp.c), + * comment this out. + * + */ +#define HasXdmAuth YES + +/* + * If you have Linux DECnet support, and want to build XFree86 with support + * for connections over DECnet, uncomment this. + * +#define HasDECnet YES + */ + +/* + * To build static and shared libraries with debugging information, uncomment + * this. Assumes you have Gcc2. + * (If you don't have Gcc2, you can use the DebugLib{X11,Xt,Xaw,...} variables + * to build debugging versions of the libraries separately.) + * +#define DebuggableLibraries YES +*/ + +/* + * To forceably build static libraries in addition to shared libraries, + * uncomment this. + * +#define ForceNormalLib YES + */ + +/* + * Uncomment this if your default tools (eg, gcc, ld, as, etc) are + * not the Linux ELF versions. + * +#define LinuxElfDefault NO + */ + +/* + * To use ELF format shared libraries for supported OSs, uncomment this. + * + * For Linux the default setting of this is the same as the setting of + * LinuxElfDefault. + * + * For FreeBSD this should automatically be set correctly by imake. Only + * change it here if you need to override the automatic setting. + * +#define UseElfFormat YES + */ + +/* + * For FreeBSD/ELF (FreeBSD 3.0) it is possible to also build and install + * a.out compatibility libraries. To enable that, uncomment this. + * +#define BuildAoutLibraries YES + */ + +/* + * If you have trouble with make bombing out in Xlib, try uncommenting this. + * You will not get dependencies as a result, but better than nothing. + * +#define MakeHashTableBug YES + */ + +/* + * If you do not want your man pages compress under SVR3 systems that + * support it, uncomment this. + * +#define CompressManPages NO + */ + +/* + * If you have sgmlfmt (the XFree86 doctools package) and want to build + * formatted docs from the SGML source, uncomment this. + * +#define HasSgmlFmt YES + */ + +/* + * To disable building some document formats, uncomment some of these. + * +#define BuildLinuxDocText NO +#define BuildLinuxDocHtml NO +#define BuildLinuxDocPS NO + */ + +/* + * To install Japanese versions of the documentation uncomment this. + * Note: The Japanese documentation consists of a subset of the + * XFree86 3.1 docs. + * +#define InstallJapaneseDocs YES + */ + +/* + * To build/install X specs docs, uncomment the following. + * The SpecsDocDirs setting here is recommended because it covers + * the docs that XFree86 has changed or added. + * +#define BuildSpecsDocs YES +#define SpecsDocDirs CTEXT GL ICCCM X11 Xext Xmu Xv XvMC i18n + */ + +/* + * To build all specs docs, not just those listed in SpecsDocDirs, uncomment + * the following. + * +#define BuildAllSpecsDocs YES + */ + +/* + * If your system doesn't support vm86() mode and you have + * libx86emu set library path here + * +#define X86EMU_LIBPATH /usr/local/lib + */ + +/* + * Most platforms default to using an already installed FreeType 2 library. + * To use the one included in this release instead, uncomment the following. + * +#define HasFreetype2 NO + */ + +/* + * To use a FreeType library already installed outside the default search + * paths, uncomment the following and set the path as needed. + * +#define HasFreetype2 YES +#define Freetype2Dir /usr/local + */ + + +/* + * Most platforms default to using an already installed Fontconfig library. + * To use the one included in this release instead, uncomment the following. + * +#define HasFontconfig NO + */ + +/* + * To use a Fontconfig library already installed outside the default search + * paths, uncomment the following and set the path as needed. +#define HasFontconfig YES +#define FontconfigDir /usr/local + */ + + +/* + * Most platforms default to using an already installed Expat library. + * To use the one included in this release instead, uncomment the following. + * +#define HasExpat NO + */ + +/* + * To use a Expat library already installed outside the default search + * paths, uncomment the following and set the path as needed. +#define HasExpat YES +#define ExpatDir /usr/local + */ + + +/* + * Most platforms default to using an already installed PNG library. + * To use the one included in this release instead, uncomment the following. + * +#define HasLibpng NO + */ + +/* + * To use a PNG library already installed outside the default search + * paths, uncomment the following and set the path as needed. +#define HasLibpng YES +#define LibpngDir /usr/local + */ + + +/* + * Most platforms default to using an already installed xterm program. + * To use the one included in this release instead, uncomment the following. + * +#define BuildXterm YES + */ |