diff options
Diffstat (limited to 'nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool')
8 files changed, 0 insertions, 1884 deletions
diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/Makefile b/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/Makefile deleted file mode 100644 index ef94541c3..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/Makefile +++ /dev/null @@ -1,96 +0,0 @@ -# Convenient makefile for managing translations. - -# Prerequisites: -# - GNU gettext -# - Python - -# Adding new translations -# ----------------------- - -# To start working on a new translation edit the POS=... line -# below. If you want to add for example a french translation, add -# fr.po. - -# Then run "make po" to generate a fresh .po file from translatable -# strings in t_options.h. Now you can edit the new .po file (fr.po in -# the example above) to translate the strings. Please make sure that -# your editor encodes the file in UTF-8. - -# Updating existing translations -# ------------------------------ - -# Run "make po" to update .po files with new translatable strings from -# t_options.h. Now you can edit the .po files you're interested -# in. Please make sure that your editor encodes the file in UTF-8. - -# Updating options.h -# ------------------ - -# Finally run "make" to generate options.h from t_options.h with all -# translations. Now you can rebuild the drivers. Any common options -# used by the drivers will have option descriptions with the latest -# translations. - -# Publishing translations -# ----------------------- - -# To get your translation(s) into Mesa CVS, please send me your -# <lang>.po file. - -# More information: -# - info gettext - -# The set of supported languages. Add languages as needed. -POS=de.po es.po nl.po fr.po - -# -# Don't change anything below, unless you know what you're doing. -# -LANGS=$(POS:%.po=%) -MOS=$(POS:%.po=%/LC_MESSAGES/options.mo) -POT=xmlpool.pot - -.PHONY: all clean pot po mo - -all: options.h - -# Only intermediate files are cleaned up. options.h is not deleted because -# it's in CVS. -clean: - rm -f $(POT) *~ - rm -rf $(LANGS) - -# Default target options.h -options.h: t_options.h mo - python gen_xmlpool.py $(LANGS) > options.h - -# Update .mo files from the corresponding .po files. -mo: - @for mo in $(MOS); do \ - lang=$${mo%%/*}; \ - echo "Updating $$mo from $$lang.po."; \ - mkdir -p $${mo%/*}; \ - msgfmt -o $$mo $$lang.po; \ - done - -# Use this target to create or update .po files with new messages in -# driconf.py. -po: $(POS) - -pot: $(POT) - -# Extract message catalog from driconf.py. -$(POT): t_options.h - xgettext -L C --from-code utf-8 -o $(POT) t_options.h - -# Create or update a .po file for a specific language. -%.po: $(POT) - @if [ -f $@ ]; then \ - echo "Merging new strings from $(POT) into $@."; \ - mv $@ $@~; \ - msgmerge -o $@ $@~ $(POT); \ - else \ - echo "Initializing $@ from $(POT)."; \ - msginit -i $(POT) -o $@~ --locale=$*; \ - sed -e 's/charset=.*\\n/charset=UTF-8\\n/' $@~ > $@; \ - fi diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/de.po b/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/de.po deleted file mode 100644 index e287d0fe7..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/de.po +++ /dev/null @@ -1,231 +0,0 @@ -# German translations for DRI driver options. -# Copyright (C) 2005 Felix Kuehling -# This file is distributed under the same license as the Mesa package. -# Felix Kuehling <fxkuehl@gmx.de>, 2005. -# -msgid "" -msgstr "" -"Project-Id-Version: Mesa 6.3\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-04-11 23:19+0200\n" -"PO-Revision-Date: 2005-04-11 01:34+0200\n" -"Last-Translator: Felix Kuehling <fxkuehl@gmx.de>\n" -"Language-Team: German <de@li.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" - -#: t_options.h:53 -msgid "Debugging" -msgstr "Fehlersuche" - -#: t_options.h:57 -msgid "Disable 3D acceleration" -msgstr "3D-Beschleunigung abschalten" - -#: t_options.h:62 -msgid "Show performance boxes" -msgstr "Zeige Performanceboxen" - -#: t_options.h:69 -msgid "Image Quality" -msgstr "Bildqualität" - -#: t_options.h:77 -msgid "Texture color depth" -msgstr "Texturfarbtiefe" - -#: t_options.h:78 -msgid "Prefer frame buffer color depth" -msgstr "Bevorzuge Farbtiefe des Framebuffers" - -#: t_options.h:79 -msgid "Prefer 32 bits per texel" -msgstr "Bevorzuge 32 bits pro Texel" - -#: t_options.h:80 -msgid "Prefer 16 bits per texel" -msgstr "Bevorzuge 16 bits pro Texel" - -#: t_options.h:81 -msgid "Force 16 bits per texel" -msgstr "Erzwinge 16 bits pro Texel" - -#: t_options.h:87 -msgid "Initial maximum value for anisotropic texture filtering" -msgstr "Initialer Maximalwert für anisotropische Texturfilterung" - -#: t_options.h:92 -msgid "Forbid negative texture LOD bias" -msgstr "Verbiete negative Textur-Detailgradverschiebung" - -#: t_options.h:97 -msgid "" -"Enable S3TC texture compression even if software support is not available" -msgstr "" -"Aktiviere S3TC Texturkomprimierung auch wenn die nötige " -"Softwareunterstützung fehlt" - -#: t_options.h:104 -msgid "Initial color reduction method" -msgstr "Initiale Farbreduktionsmethode" - -#: t_options.h:105 -msgid "Round colors" -msgstr "Farben runden" - -#: t_options.h:106 -msgid "Dither colors" -msgstr "Farben rastern" - -#: t_options.h:114 -msgid "Color rounding method" -msgstr "Farbrundungsmethode" - -#: t_options.h:115 -msgid "Round color components downward" -msgstr "Farbkomponenten abrunden" - -#: t_options.h:116 -msgid "Round to nearest color" -msgstr "Zur ähnlichsten Farbe runden" - -#: t_options.h:125 -msgid "Color dithering method" -msgstr "Farbrasterungsmethode" - -#: t_options.h:126 -msgid "Horizontal error diffusion" -msgstr "Horizontale Fehlerstreuung" - -#: t_options.h:127 -msgid "Horizontal error diffusion, reset error at line start" -msgstr "Horizontale Fehlerstreuung, Fehler am Zeilenanfang zurücksetzen" - -#: t_options.h:128 -msgid "Ordered 2D color dithering" -msgstr "Geordnete 2D Farbrasterung" - -#: t_options.h:134 -msgid "Floating point depth buffer" -msgstr "Fließkomma z-Puffer" - -#: t_options.h:140 -msgid "Performance" -msgstr "Leistung" - -#: t_options.h:148 -msgid "TCL mode (Transformation, Clipping, Lighting)" -msgstr "TCL-Modus (Transformation, Clipping, Licht)" - -#: t_options.h:149 -msgid "Use software TCL pipeline" -msgstr "Benutze die Software-TCL-Pipeline" - -#: t_options.h:150 -msgid "Use hardware TCL as first TCL pipeline stage" -msgstr "Benutze Hardware TCL als erste Stufe der TCL-Pipeline" - -#: t_options.h:151 -msgid "Bypass the TCL pipeline" -msgstr "Umgehe die TCL-Pipeline" - -#: t_options.h:152 -msgid "" -"Bypass the TCL pipeline with state-based machine code generated on-the-fly" -msgstr "" -"Umgehe die TCL-Pipeline mit zur Laufzeit erzeugtem, zustandsbasiertem " -"Maschinencode" - -#: t_options.h:161 -msgid "Method to limit rendering latency" -msgstr "Methode zur Begrenzung der Bildverzögerung" - -#: t_options.h:162 -msgid "Busy waiting for the graphics hardware" -msgstr "Aktives Warten auf die Grafikhardware" - -#: t_options.h:163 -msgid "Sleep for brief intervals while waiting for the graphics hardware" -msgstr "Kurze Schlafintervalle beim Warten auf die Grafikhardware" - -#: t_options.h:164 -msgid "Let the graphics hardware emit a software interrupt and sleep" -msgstr "" -"Die Grafikhardware eine Softwareunterbrechnung erzeugen lassen und schlafen" - -#: t_options.h:174 -msgid "Synchronization with vertical refresh (swap intervals)" -msgstr "Synchronisation mit der vertikalen Bildwiederholung" - -#: t_options.h:175 -msgid "Never synchronize with vertical refresh, ignore application's choice" -msgstr "" -"Niemals mit der Bildwiederholung synchronisieren, Anweisungen der Anwendung " -"ignorieren" - -#: t_options.h:176 -msgid "Initial swap interval 0, obey application's choice" -msgstr "Initiales Bildinterval 0, Anweisungen der Anwendung gehorchen" - -#: t_options.h:177 -msgid "Initial swap interval 1, obey application's choice" -msgstr "Initiales Bildinterval 1, Anweisungen der Anwendung gehorchen" - -#: t_options.h:178 -msgid "" -"Always synchronize with vertical refresh, application chooses the minimum " -"swap interval" -msgstr "" -"Immer mit der Bildwiederholung synchronisieren, Anwendung wählt das minmale " -"Bildinterval" - -#: t_options.h:186 -msgid "Use HyperZ to boost performance" -msgstr "HyperZ zur Leistungssteigerung verwenden" - -#: t_options.h:191 -msgid "Number of texture units used" -msgstr "Anzahl der benutzten Textureinheiten" - -#: t_options.h:196 -msgid "" -"Enable hack to allow larger textures with texture compression on radeon/r200" -msgstr "" -"Hack aktivieren, der mit Texturkompression auf radeon/r200 größere Texturen " -"erlaubt" - -#: t_options.h:201 -msgid "Texture filtering quality vs. speed, AKA “brilinear” texture filtering" -msgstr "" -"Texturfilterqualität versus -geschwindigkeit, auch bekannt als „brilineare“ " -"Texturfilterung" - -#: t_options.h:209 -msgid "Used types of texture memory" -msgstr "Benutzte Arten von Texturspeicher" - -#: t_options.h:210 -msgid "All available memory" -msgstr "Aller verfügbarer Speicher" - -#: t_options.h:211 -msgid "Only card memory (if available)" -msgstr "Nur Grafikspeicher (falls verfügbar)" - -#: t_options.h:212 -msgid "Only GART (AGP/PCIE) memory (if available)" -msgstr "Nur GART-Speicher (AGP/PCIE) (falls verfügbar)" - -#: t_options.h:220 -msgid "Features that are not hardware-accelerated" -msgstr "Funktionalität, die nicht hardwarebeschleunigt ist" - -#: t_options.h:224 -msgid "Enable extension GL_ARB_vertex_program" -msgstr "Erweiterung GL_ARB_vertex_program aktivieren" - -#: t_options.h:229 -msgid "Enable extension GL_NV_vertex_program" -msgstr "Erweiterung GL_NV_vertex_program aktivieren" diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/es.po b/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/es.po deleted file mode 100644 index 82ad177cb..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/es.po +++ /dev/null @@ -1,219 +0,0 @@ -# translation of es.po to Spanish -# Spanish translations for PACKAGE package. -# Copyright (C) 2005 THE PACKAGE'S COPYRIGHT HOLDER -# This file is distributed under the same license as the PACKAGE package. -# David <deifo@ono.com>, 2005. -# David Rubio Miguélez <deifo@ono.com>, 2005. -# -msgid "" -msgstr "" -"Project-Id-Version: es\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-04-12 12:18+0200\n" -"PO-Revision-Date: 2005-04-12 20:26+0200\n" -"Last-Translator: David Rubio Miguélez <deifo@ono.com>\n" -"Language-Team: Spanish <es@li.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: KBabel 1.10\n" - -#: t_options.h:53 -msgid "Debugging" -msgstr "Depurando" - -#: t_options.h:57 -msgid "Disable 3D acceleration" -msgstr "Desactivar aceleración 3D" - -#: t_options.h:62 -msgid "Show performance boxes" -msgstr "Mostrar cajas de rendimiento" - -#: t_options.h:69 -msgid "Image Quality" -msgstr "Calidad de imagen" - -#: t_options.h:77 -msgid "Texture color depth" -msgstr "Profundidad de color de textura" - -#: t_options.h:78 -msgid "Prefer frame buffer color depth" -msgstr "Preferir profundidad de color del \"framebuffer\"" - -#: t_options.h:79 -msgid "Prefer 32 bits per texel" -msgstr "Preferir 32 bits por texel" - -#: t_options.h:80 -msgid "Prefer 16 bits per texel" -msgstr "Preferir 16 bits por texel" - -#: t_options.h:81 -msgid "Force 16 bits per texel" -msgstr "Forzar a 16 bits por texel" - -#: t_options.h:87 -msgid "Initial maximum value for anisotropic texture filtering" -msgstr "Valor máximo inicial para filtrado anisotrópico de textura" - -#: t_options.h:92 -msgid "Forbid negative texture LOD bias" -msgstr "Prohibir valores negativos de Nivel De Detalle (LOD) de texturas" - -#: t_options.h:97 -msgid "Enable S3TC texture compression even if software support is not available" -msgstr "Activar la compresión de texturas S3TC incluso si el soporte por software no está disponible" - -#: t_options.h:104 -msgid "Initial color reduction method" -msgstr "Método inicial de reducción de color" - -#: t_options.h:105 -msgid "Round colors" -msgstr "Colores redondeados" - -#: t_options.h:106 -msgid "Dither colors" -msgstr "Colores suavizados" - -#: t_options.h:114 -msgid "Color rounding method" -msgstr "Método de redondeo de colores" - -#: t_options.h:115 -msgid "Round color components downward" -msgstr "Redondear hacia abajo los componentes de color" - -#: t_options.h:116 -msgid "Round to nearest color" -msgstr "Redondear al color más cercano" - -#: t_options.h:125 -msgid "Color dithering method" -msgstr "Método de suavizado de color" - -#: t_options.h:126 -msgid "Horizontal error diffusion" -msgstr "Difusión de error horizontal" - -#: t_options.h:127 -msgid "Horizontal error diffusion, reset error at line start" -msgstr "Difusión de error horizontal, reiniciar error al comienzo de línea" - -#: t_options.h:128 -msgid "Ordered 2D color dithering" -msgstr "Suavizado de color 2D ordenado" - -#: t_options.h:134 -msgid "Floating point depth buffer" -msgstr "Búfer de profundidad en coma flotante" - -#: t_options.h:140 -msgid "Performance" -msgstr "Rendimiento" - -#: t_options.h:148 -msgid "TCL mode (Transformation, Clipping, Lighting)" -msgstr "Modo TCL (Transformación, Recorte, Iluminación)" - -#: t_options.h:149 -msgid "Use software TCL pipeline" -msgstr "Usar tubería TCL por software" - -#: t_options.h:150 -msgid "Use hardware TCL as first TCL pipeline stage" -msgstr "Usar TCL por hardware en la primera fase de la tubería TCL" - -#: t_options.h:151 -msgid "Bypass the TCL pipeline" -msgstr "Pasar por alto la tubería TCL" - -#: t_options.h:152 -msgid "Bypass the TCL pipeline with state-based machine code generated on-the-fly" -msgstr "Pasar por alto la tubería TCL con código máquina basado en estados generado al vuelo" - -#: t_options.h:161 -msgid "Method to limit rendering latency" -msgstr "Método para limitar la latencia de rénder" - -#: t_options.h:162 -msgid "Busy waiting for the graphics hardware" -msgstr "Esperar activamente al hardware gráfico" - -#: t_options.h:163 -msgid "Sleep for brief intervals while waiting for the graphics hardware" -msgstr "Dormir en intervalos cortos mientras se espera al hardware gráfico" - -#: t_options.h:164 -msgid "Let the graphics hardware emit a software interrupt and sleep" -msgstr "Permitir que el hardware gráfico emita una interrupción de software y duerma" - -#: t_options.h:174 -msgid "Synchronization with vertical refresh (swap intervals)" -msgstr "Sincronización con el refresco vertical (intervalos de intercambio)" - -#: t_options.h:175 -msgid "Never synchronize with vertical refresh, ignore application's choice" -msgstr "No sincronizar nunca con el refresco vertical, ignorar la elección de la aplicación" - -#: t_options.h:176 -msgid "Initial swap interval 0, obey application's choice" -msgstr "Intervalo de intercambio inicial 0, obedecer la elección de la aplicación" - -#: t_options.h:177 -msgid "Initial swap interval 1, obey application's choice" -msgstr "Intervalo de intercambio inicial 1, obedecer la elección de la aplicación" - -#: t_options.h:178 -msgid "" -"Always synchronize with vertical refresh, application chooses the minimum " -"swap interval" -msgstr "Sincronizar siempre con el refresco vertical, la aplicación elige el intervalo de intercambio mínimo" - -#: t_options.h:186 -msgid "Use HyperZ to boost performance" -msgstr "Usar HyperZ para potenciar rendimiento" - -#: t_options.h:191 -msgid "Number of texture units used" -msgstr "Número de unidades de textura usadas" - -#: t_options.h:196 -msgid "Enable hack to allow larger textures with texture compression on radeon/r200" -msgstr "Activar \"hack\" para permitir texturas más grandes con compresión de textura activada en la Radeon/r200" - -#: t_options.h:201 -msgid "Texture filtering quality vs. speed, AKA “brilinear” texture filtering" -msgstr "Calidad de filtrado de textura vs. velocidad, alias filtrado \"brilinear\" de textura" - -#: t_options.h:209 -msgid "Used types of texture memory" -msgstr "Tipos de memoria de textura usados" - -#: t_options.h:210 -msgid "All available memory" -msgstr "Toda la memoria disponible" - -#: t_options.h:211 -msgid "Only card memory (if available)" -msgstr "Sólo la memoria de la tarjeta (si disponible)" - -#: t_options.h:212 -msgid "Only GART (AGP/PCIE) memory (if available)" -msgstr "Sólo memoria GART (AGP/PCIE) (si disponible)" - -#: t_options.h:220 -msgid "Features that are not hardware-accelerated" -msgstr "Características no aceleradas por hardware" - -#: t_options.h:224 -msgid "Enable extension GL_ARB_vertex_program" -msgstr "Activar la extensión GL_ARB_vertex_program" - -#: t_options.h:229 -msgid "Enable extension GL_NV_vertex_program" -msgstr "Activar extensión GL_NV_vertex_program" - diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/fr.po b/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/fr.po deleted file mode 100644 index 19f3b4a4e..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/fr.po +++ /dev/null @@ -1,225 +0,0 @@ -# French translations for DRI driver options. -# Copyright (C) 2005 Stephane Marchesin -# This file is distributed under the same license as the Mesa package. -# Stephane Marchesin <marchesin@icps.u-strasbg.fr>, 2005. -# -msgid "" -msgstr "" -"Project-Id-Version: Mesa 6.3\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-04-11 23:19+0200\n" -"PO-Revision-Date: 2005-04-11 01:34+0200\n" -"Last-Translator: Stephane Marchesin <marchesin@icps.u-strasbg.fr>\n" -"Language-Team: French <fr@li.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" - -#: t_options.h:53 -msgid "Debugging" -msgstr "Debogage" - -#: t_options.h:57 -msgid "Disable 3D acceleration" -msgstr "Désactiver l'accélération 3D" - -#: t_options.h:62 -msgid "Show performance boxes" -msgstr "Afficher les boîtes de performance" - -#: t_options.h:69 -msgid "Image Quality" -msgstr "Qualité d'image" - -#: t_options.h:77 -msgid "Texture color depth" -msgstr "Profondeur de texture" - -#: t_options.h:78 -msgid "Prefer frame buffer color depth" -msgstr "Profondeur de couleur" - -#: t_options.h:79 -msgid "Prefer 32 bits per texel" -msgstr "Préférer 32 bits par texel" - -#: t_options.h:80 -msgid "Prefer 16 bits per texel" -msgstr "Prérérer 16 bits par texel" - -#: t_options.h:81 -msgid "Force 16 bits per texel" -msgstr "Forcer 16 bits par texel" - -#: t_options.h:87 -msgid "Initial maximum value for anisotropic texture filtering" -msgstr "Valeur maximale initiale pour le filtrage anisotropique de texture" - -#: t_options.h:92 -msgid "Forbid negative texture LOD bias" -msgstr "Interdire le LOD bias negatif" - -#: t_options.h:97 -msgid "" -"Enable S3TC texture compression even if software support is not available" -msgstr "" -"Activer la compression de texture S3TC même si le support logiciel est absent" - -#: t_options.h:104 -msgid "Initial color reduction method" -msgstr "Technique de réduction de couleurs" - -#: t_options.h:105 -msgid "Round colors" -msgstr "Arrondir les valeurs de couleur" - -#: t_options.h:106 -msgid "Dither colors" -msgstr "Tramer les couleurs" - -#: t_options.h:114 -msgid "Color rounding method" -msgstr "Méthode d'arrondi des couleurs" - -#: t_options.h:115 -msgid "Round color components downward" -msgstr "Arrondi à l'inférieur" - -#: t_options.h:116 -msgid "Round to nearest color" -msgstr "Arrondi au plus proche" - -#: t_options.h:125 -msgid "Color dithering method" -msgstr "Méthode de tramage" - -#: t_options.h:126 -msgid "Horizontal error diffusion" -msgstr "Diffusion d'erreur horizontale" - -#: t_options.h:127 -msgid "Horizontal error diffusion, reset error at line start" -msgstr "Diffusion d'erreur horizontale, réinitialisé pour chaque ligne" - -#: t_options.h:128 -msgid "Ordered 2D color dithering" -msgstr "Tramage ordonné des couleurs" - -#: t_options.h:134 -msgid "Floating point depth buffer" -msgstr "Z-buffer en virgule flottante" - -#: t_options.h:140 -msgid "Performance" -msgstr "Performance" - -#: t_options.h:148 -msgid "TCL mode (Transformation, Clipping, Lighting)" -msgstr "Mode de TCL (Transformation, Clipping, Eclairage)" - -#: t_options.h:149 -msgid "Use software TCL pipeline" -msgstr "Utiliser un pipeline TCL logiciel" - -#: t_options.h:150 -msgid "Use hardware TCL as first TCL pipeline stage" -msgstr "Utiliser le TCL matériel pour le premier niveau de pipeline" - -#: t_options.h:151 -msgid "Bypass the TCL pipeline" -msgstr "Court-circuiter le pipeline TCL" - -#: t_options.h:152 -msgid "" -"Bypass the TCL pipeline with state-based machine code generated on-the-fly" -msgstr "" -"Court-circuiter le pipeline TCL par une machine à états qui génère le code" -"de TCL à la volée" - -#: t_options.h:161 -msgid "Method to limit rendering latency" -msgstr "Méthode d'attente de la carte graphique" - -#: t_options.h:162 -msgid "Busy waiting for the graphics hardware" -msgstr "Attente active de la carte graphique" - -#: t_options.h:163 -msgid "Sleep for brief intervals while waiting for the graphics hardware" -msgstr "Attente utilisant usleep()" - -#: t_options.h:164 -msgid "Let the graphics hardware emit a software interrupt and sleep" -msgstr "Utiliser les interruptions" - -#: t_options.h:174 -msgid "Synchronization with vertical refresh (swap intervals)" -msgstr "Synchronisation de l'affichage avec le balayage vertical" - -#: t_options.h:175 -msgid "Never synchronize with vertical refresh, ignore application's choice" -msgstr "Ne jamais synchroniser avec le balayage vertical, ignorer le choix de l'application" - -#: t_options.h:176 -msgid "Initial swap interval 0, obey application's choice" -msgstr "Ne pas synchroniser avec le balayage vertical par défaut, mais obéir au choix de l'application" - -#: t_options.h:177 -msgid "Initial swap interval 1, obey application's choice" -msgstr "Synchroniser avec le balayage vertical par défaut, mais obéir au choix de l'application" - -#: t_options.h:178 -msgid "" -"Always synchronize with vertical refresh, application chooses the minimum " -"swap interval" -msgstr "" -"Toujours synchroniser avec le balayage vertical, l'application choisit l'intervalle minimal" - -#: t_options.h:186 -msgid "Use HyperZ to boost performance" -msgstr "Utiliser le HyperZ pour améliorer les performances" - -#: t_options.h:191 -msgid "Number of texture units used" -msgstr "Nombre d'unités de texture" - -#: t_options.h:196 -msgid "" -"Enable hack to allow larger textures with texture compression on radeon/r200" -msgstr "" -"Activer le hack permettant l'utilisation de textures de grande taille avec la " -"compression de textures sur radeon/r200" - -#: t_options.h:201 -msgid "Texture filtering quality vs. speed, AKA “brilinear” texture filtering" -msgstr "" -"Qualité/performance du filtrage trilinéaire de texture (filtrage brilinéaire)" - -#: t_options.h:209 -msgid "Used types of texture memory" -msgstr "Types de mémoire de texture" - -#: t_options.h:210 -msgid "All available memory" -msgstr "Utiliser toute la mémoire disponible" - -#: t_options.h:211 -msgid "Only card memory (if available)" -msgstr "Utiliser uniquement la mémoire graphique (si disponible)" - -#: t_options.h:212 -msgid "Only GART (AGP/PCIE) memory (if available)" -msgstr "Utiliser uniquement la mémoire GART (AGP/PCIE) (si disponible)" - -#: t_options.h:220 -msgid "Features that are not hardware-accelerated" -msgstr "Fonctionnalités ne bénéficiant pas d'une accélération matérielle" - -#: t_options.h:224 -msgid "Enable extension GL_ARB_vertex_program" -msgstr "Activer l'extension GL_ARB_vertex_program" - -#: t_options.h:229 -msgid "Enable extension GL_NV_vertex_program" -msgstr "Activer l'extension GL_NV_vertex_program" diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/gen_xmlpool.py b/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/gen_xmlpool.py deleted file mode 100644 index 7398c4cd0..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/gen_xmlpool.py +++ /dev/null @@ -1,191 +0,0 @@ -#!/usr/bin/python - -import sys -import gettext -import re - -# List of supported languages -languages = sys.argv[1:] - -# Escape special characters in C strings -def escapeCString (s): - escapeSeqs = {'\a' : '\\a', '\b' : '\\b', '\f' : '\\f', '\n' : '\\n', - '\r' : '\\r', '\t' : '\\t', '\v' : '\\v', '\\' : '\\\\'} - # " -> '' is a hack. Quotes (") aren't possible in XML attributes. - # Better use Unicode characters for typographic quotes in option - # descriptions and translations. - i = 0 - r = '' - while i < len(s): - # Special case: escape double quote with \u201c or \u201d, depending - # on whether it's an open or close quote. This is needed because plain - # double quotes are not possible in XML attributes. - if s[i] == '"': - if i == len(s)-1 or s[i+1].isspace(): - # close quote - q = u'\u201c' - else: - # open quote - q = u'\u201d' - r = r + q - elif escapeSeqs.has_key(s[i]): - r = r + escapeSeqs[s[i]] - else: - r = r + s[i] - i = i + 1 - return r - -# Expand escape sequences in C strings (needed for gettext lookup) -def expandCString (s): - escapeSeqs = {'a' : '\a', 'b' : '\b', 'f' : '\f', 'n' : '\n', - 'r' : '\r', 't' : '\t', 'v' : '\v', - '"' : '"', '\\' : '\\'} - i = 0 - escape = False - hexa = False - octa = False - num = 0 - digits = 0 - r = '' - while i < len(s): - if not escape: - if s[i] == '\\': - escape = True - else: - r = r + s[i] - elif hexa: - if (s[i] >= '0' and s[i] <= '9') or \ - (s[i] >= 'a' and s[i] <= 'f') or \ - (s[i] >= 'A' and s[i] <= 'F'): - num = num * 16 + int(s[i],16) - digits = digits + 1 - else: - digits = 2 - if digits >= 2: - hexa = False - escape = False - r = r + chr(num) - elif octa: - if s[i] >= '0' and s[i] <= '7': - num = num * 8 + int(s[i],8) - digits = digits + 1 - else: - digits = 3 - if digits >= 3: - octa = False - escape = False - r = r + chr(num) - else: - if escapeSeqs.has_key(s[i]): - r = r + escapeSeqs[s[i]] - escape = False - elif s[i] >= '0' and s[i] <= '7': - octa = True - num = int(s[i],8) - if num <= 3: - digits = 1 - else: - digits = 2 - elif s[i] == 'x' or s[i] == 'X': - hexa = True - num = 0 - digits = 0 - else: - r = r + s[i] - escape = False - i = i + 1 - return r - -# Expand matches. The first match is always a DESC or DESC_BEGIN match. -# Subsequent matches are ENUM matches. -# -# DESC, DESC_BEGIN format: \1 \2=<lang> \3 \4=gettext(" \5=<text> \6=") \7 -# ENUM format: \1 \2=gettext(" \3=<text> \4=") \5 -def expandMatches (matches, translations, end=None): - assert len(matches) > 0 - nTranslations = len(translations) - i = 0 - # Expand the description+enums for all translations - for lang,trans in translations: - i = i + 1 - # Make sure that all but the last line of a simple description - # are extended with a backslash. - suffix = '' - if len(matches) == 1 and i < len(translations) and \ - not matches[0].expand (r'\7').endswith('\\'): - suffix = ' \\' - # Expand the description line. Need to use ugettext in order to allow - # non-ascii unicode chars in the original English descriptions. - text = escapeCString (trans.ugettext (unicode (expandCString ( - matches[0].expand (r'\5')), "utf-8"))).encode("utf-8") - print matches[0].expand (r'\1' + lang + r'\3"' + text + r'"\7') + suffix - # Expand any subsequent enum lines - for match in matches[1:]: - text = escapeCString (trans.ugettext (unicode (expandCString ( - match.expand (r'\3')), "utf-8"))).encode("utf-8") - print match.expand (r'\1"' + text + r'"\5') - - # Expand description end - if end: - print end, - -# Compile a list of translation classes to all supported languages. -# The first translation is always a NullTranslations. -translations = [("en", gettext.NullTranslations())] -for lang in languages: - try: - trans = gettext.translation ("options", ".", [lang]) - except IOError: - sys.stderr.write ("Warning: language '%s' not found.\n" % lang) - continue - translations.append ((lang, trans)) - -# Regular expressions: -reLibintl_h = re.compile (r'#\s*include\s*<libintl.h>') -reDESC = re.compile (r'(\s*DRI_CONF_DESC\s*\(\s*)([a-z]+)(\s*,\s*)(gettext\s*\(\s*")(.*)("\s*\))(\s*\)[ \t]*\\?)$') -reDESC_BEGIN = re.compile (r'(\s*DRI_CONF_DESC_BEGIN\s*\(\s*)([a-z]+)(\s*,\s*)(gettext\s*\(\s*")(.*)("\s*\))(\s*\)[ \t]*\\?)$') -reENUM = re.compile (r'(\s*DRI_CONF_ENUM\s*\([^,]+,\s*)(gettext\s*\(\s*")(.*)("\s*\))(\s*\)[ \t]*\\?)$') -reDESC_END = re.compile (r'\s*DRI_CONF_DESC_END') - -# Print a header -print \ -"/***********************************************************************\n" \ -" *** THIS FILE IS GENERATED AUTOMATICALLY. DON'T EDIT! ***\n" \ -" ***********************************************************************/" - -# Process the options template and generate options.h with all -# translations. -template = file ("t_options.h", "r") -descMatches = [] -for line in template: - if len(descMatches) > 0: - matchENUM = reENUM .match (line) - matchDESC_END = reDESC_END.match (line) - if matchENUM: - descMatches.append (matchENUM) - elif matchDESC_END: - expandMatches (descMatches, translations, line) - descMatches = [] - else: - sys.stderr.write ( - "Warning: unexpected line inside description dropped:\n%s\n" \ - % line) - continue - if reLibintl_h.search (line): - # Ignore (comment out) #include <libintl.h> - print "/* %s * commented out by gen_xmlpool.py */" % line - continue - matchDESC = reDESC .match (line) - matchDESC_BEGIN = reDESC_BEGIN.match (line) - if matchDESC: - assert len(descMatches) == 0 - expandMatches ([matchDESC], translations) - elif matchDESC_BEGIN: - assert len(descMatches) == 0 - descMatches = [matchDESC_BEGIN] - else: - print line, - -if len(descMatches) > 0: - sys.stderr.write ("Warning: unterminated description at end of file.\n") - expandMatches (descMatches, translations) diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/nl.po b/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/nl.po deleted file mode 100644 index 1e4cf167b..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/nl.po +++ /dev/null @@ -1,230 +0,0 @@ -# Dutch translations for PACKAGE package. -# Copyright (C) 2005 THE PACKAGE'S COPYRIGHT HOLDER -# This file is distributed under the same license as the PACKAGE package. -# <manfred.stienstra@dwerg.net>, 2005. -# -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2005-04-12 20:09+0200\n" -"PO-Revision-Date: 2005-04-12 20:09+0200\n" -"Last-Translator: Manfred Stienstra <manfred.stienstra@dwerg.net>\n" -"Language-Team: Dutch <vertaling@nl.linux.org>\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" - -#: t_options.h:53 -msgid "Debugging" -msgstr "Debuggen" - -#: t_options.h:57 -msgid "Disable 3D acceleration" -msgstr "3D versnelling uitschakelen" - -#: t_options.h:62 -msgid "Show performance boxes" -msgstr "Laat prestatie boxjes zien" - -#: t_options.h:69 -msgid "Image Quality" -msgstr "Beeldkwaliteit" - -#: t_options.h:77 -msgid "Texture color depth" -msgstr "Textuurkleurendiepte" - -#: t_options.h:78 -msgid "Prefer frame buffer color depth" -msgstr "Prefereer kaderbufferkleurdiepte" - -#: t_options.h:79 -msgid "Prefer 32 bits per texel" -msgstr "Prefereer 32 bits per texel" - -#: t_options.h:80 -msgid "Prefer 16 bits per texel" -msgstr "Prefereer 16 bits per texel" - -#: t_options.h:81 -msgid "Force 16 bits per texel" -msgstr "Dwing 16 bits per texel af" - -#: t_options.h:87 -msgid "Initial maximum value for anisotropic texture filtering" -msgstr "Initïele maximum waarde voor anisotrophische textuur filtering" - -#: t_options.h:92 -msgid "Forbid negative texture LOD bias" -msgstr "Verbied negatief niveau detailonderscheid (LOD) van texturen" - -#: t_options.h:97 -msgid "" -"Enable S3TC texture compression even if software support is not available" -msgstr "" -"Schakel S3TC textuurcompressie in, zelfs als softwareondersteuning niet " -"aanwezig is" - -#: t_options.h:104 -msgid "Initial color reduction method" -msgstr "Initïele kleurreductie methode" - -#: t_options.h:105 -msgid "Round colors" -msgstr "Rond kleuren af" - -#: t_options.h:106 -msgid "Dither colors" -msgstr "Rasteriseer kleuren" - -#: t_options.h:114 -msgid "Color rounding method" -msgstr "Kleurafrondingmethode" - -#: t_options.h:115 -msgid "Round color components downward" -msgstr "Rond kleurencomponenten af naar beneden" - -#: t_options.h:116 -msgid "Round to nearest color" -msgstr "Rond af naar dichtsbijzijnde kleur" - -#: t_options.h:125 -msgid "Color dithering method" -msgstr "Kleurrasteriseringsmethode" - -#: t_options.h:126 -msgid "Horizontal error diffusion" -msgstr "Horizontale foutdiffusie" - -#: t_options.h:127 -msgid "Horizontal error diffusion, reset error at line start" -msgstr "Horizontale foutdiffusie, zet fout bij lijnbegin terug" - -#: t_options.h:128 -msgid "Ordered 2D color dithering" -msgstr "Geordende 2D kleurrasterisering" - -#: t_options.h:134 -msgid "Floating point depth buffer" -msgstr "Dieptebuffer als commagetal" - -#: t_options.h:140 -msgid "Performance" -msgstr "Prestatie" - -#: t_options.h:148 -msgid "TCL mode (Transformation, Clipping, Lighting)" -msgstr "TCL-modus (Transformatie, Clipping, Licht)" - -#: t_options.h:149 -msgid "Use software TCL pipeline" -msgstr "Gebruik software TCL pijpleiding" - -#: t_options.h:150 -msgid "Use hardware TCL as first TCL pipeline stage" -msgstr "Gebruik hardware TCL as eerste TCL pijpleiding trap" - -#: t_options.h:151 -msgid "Bypass the TCL pipeline" -msgstr "Omzeil de TCL pijpleiding" - -#: t_options.h:152 -msgid "" -"Bypass the TCL pipeline with state-based machine code generated on-the-fly" -msgstr "" -"Omzeil de TCL pijpleiding met staatgebaseerde machinecode die tijdens " -"executie gegenereerd wordt" - -#: t_options.h:161 -msgid "Method to limit rendering latency" -msgstr "Methode om beeldopbouwvertraging te onderdrukken" - -#: t_options.h:162 -msgid "Busy waiting for the graphics hardware" -msgstr "Actief wachten voor de grafische hardware" - -#: t_options.h:163 -msgid "Sleep for brief intervals while waiting for the graphics hardware" -msgstr "Slaap voor korte intervallen tijdens het wachten op de grafische " -"hardware" - -#: t_options.h:164 -msgid "Let the graphics hardware emit a software interrupt and sleep" -msgstr "Laat de grafische hardware een software onderbreking uitzenden en in " -"slaap vallen" - -#: t_options.h:174 -msgid "Synchronization with vertical refresh (swap intervals)" -msgstr "Synchronisatie met verticale verversing (interval omwisselen)" - -#: t_options.h:175 -msgid "Never synchronize with vertical refresh, ignore application's choice" -msgstr "Nooit synchroniseren met verticale verversing, negeer de keuze van de " -"applicatie" - -#: t_options.h:176 -msgid "Initial swap interval 0, obey application's choice" -msgstr "Initïeel omwisselingsinterval 0, honoreer de keuze van de applicatie" - -#: t_options.h:177 -msgid "Initial swap interval 1, obey application's choice" -msgstr "Initïeel omwisselingsinterval 1, honoreer de keuze van de applicatie" - -#: t_options.h:178 -msgid "" -"Always synchronize with vertical refresh, application chooses the minimum " -"swap interval" -msgstr "" -"Synchroniseer altijd met verticale verversing, de applicatie kiest het " -"minimum omwisselingsinterval" - -#: t_options.h:186 -msgid "Use HyperZ to boost performance" -msgstr "Gebruik HyperZ om de prestaties te verbeteren" - -#: t_options.h:191 -msgid "Number of texture units used" -msgstr "Aantal textuureenheden in gebruik" - -#: t_options.h:196 -msgid "" -"Enable hack to allow larger textures with texture compression on radeon/r200" -msgstr "" -"Schakel hack in om met textuurcompressie grotere texturen toe te staan op " -"een radeon/r200" - -#: t_options.h:201 -msgid "Texture filtering quality vs. speed, AKA “brilinear” texture filtering" -msgstr "Textuurfilterkwaliteit versus -snelheid, ookwel bekend als " -"“brilineaire” textuurfiltering" - -#: t_options.h:209 -msgid "Used types of texture memory" -msgstr "Gebruikte soorten textuurgeheugen" - -#: t_options.h:210 -msgid "All available memory" -msgstr "Al het beschikbaar geheugen" - -#: t_options.h:211 -msgid "Only card memory (if available)" -msgstr "Alleen geheugen op de kaart (als het aanwezig is)" - -#: t_options.h:212 -msgid "Only GART (AGP/PCIE) memory (if available)" -msgstr "Alleen GART (AGP/PCIE) geheugen (als het aanwezig is)" - -#: t_options.h:220 -msgid "Features that are not hardware-accelerated" -msgstr "Eigenschappen die niet hardwareversneld zijn" - -#: t_options.h:224 -msgid "Enable extension GL_ARB_vertex_program" -msgstr "Zet uitbreiding GL_ARB_vertex_program aan" - -#: t_options.h:229 -msgid "Enable extension GL_NV_vertex_program" -msgstr "Zet uitbreiding GL_NV_vertex_program aan" diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/options.h b/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/options.h deleted file mode 100644 index 86d17d024..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/options.h +++ /dev/null @@ -1,462 +0,0 @@ -/*********************************************************************** - *** THIS FILE IS GENERATED AUTOMATICALLY. DON'T EDIT! *** - ***********************************************************************/ -/* - * XML DRI client-side driver configuration - * Copyright (C) 2003 Felix Kuehling - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included - * in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * FELIX KUEHLING, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM, - * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR - * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE - * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - */ -/** - * \file t_options.h - * \brief Templates of common options - * \author Felix Kuehling - * - * This file defines macros for common options that can be used to - * construct driConfigOptions in the drivers. This file is only a - * template containing English descriptions for options wrapped in - * gettext(). xgettext can be used to extract translatable - * strings. These strings can then be translated by anyone familiar - * with GNU gettext. gen_xmlpool.py takes this template and fills in - * all the translations. The result (options.h) is included by - * xmlpool.h which in turn can be included by drivers. - * - * The macros used to describe otions in this file are defined in - * ../xmlpool.h. - */ - -/* This is needed for xgettext to extract translatable strings. - * gen_xmlpool.py will discard this line. */ -/* #include <libintl.h> - * commented out by gen_xmlpool.py */ - -/* - * predefined option sections and options with multi-lingual descriptions - */ - -/** \brief Debugging options */ -#define DRI_CONF_SECTION_DEBUG \ -DRI_CONF_SECTION_BEGIN \ - DRI_CONF_DESC(en,"Debugging") \ - DRI_CONF_DESC(de,"Fehlersuche") \ - DRI_CONF_DESC(es,"Depurando") \ - DRI_CONF_DESC(nl,"Debuggen") \ - DRI_CONF_DESC(fr,"Debogage") - -#define DRI_CONF_NO_RAST(def) \ -DRI_CONF_OPT_BEGIN(no_rast,bool,def) \ - DRI_CONF_DESC(en,"Disable 3D acceleration") \ - DRI_CONF_DESC(de,"3D-Beschleunigung abschalten") \ - DRI_CONF_DESC(es,"Desactivar aceleración 3D") \ - DRI_CONF_DESC(nl,"3D versnelling uitschakelen") \ - DRI_CONF_DESC(fr,"Désactiver l'accélération 3D") \ -DRI_CONF_OPT_END - -#define DRI_CONF_PERFORMANCE_BOXES(def) \ -DRI_CONF_OPT_BEGIN(performance_boxes,bool,def) \ - DRI_CONF_DESC(en,"Show performance boxes") \ - DRI_CONF_DESC(de,"Zeige Performanceboxen") \ - DRI_CONF_DESC(es,"Mostrar cajas de rendimiento") \ - DRI_CONF_DESC(nl,"Laat prestatie boxjes zien") \ - DRI_CONF_DESC(fr,"Afficher les boîtes de performance") \ -DRI_CONF_OPT_END - - -/** \brief Texture-related options */ -#define DRI_CONF_SECTION_QUALITY \ -DRI_CONF_SECTION_BEGIN \ - DRI_CONF_DESC(en,"Image Quality") \ - DRI_CONF_DESC(de,"Bildqualität") \ - DRI_CONF_DESC(es,"Calidad de imagen") \ - DRI_CONF_DESC(nl,"Beeldkwaliteit") \ - DRI_CONF_DESC(fr,"Qualité d'image") - -#define DRI_CONF_TEXTURE_DEPTH_FB 0 -#define DRI_CONF_TEXTURE_DEPTH_32 1 -#define DRI_CONF_TEXTURE_DEPTH_16 2 -#define DRI_CONF_TEXTURE_DEPTH_FORCE_16 3 -#define DRI_CONF_TEXTURE_DEPTH(def) \ -DRI_CONF_OPT_BEGIN_V(texture_depth,enum,def,"0:3") \ - DRI_CONF_DESC_BEGIN(en,"Texture color depth") \ - DRI_CONF_ENUM(0,"Prefer frame buffer color depth") \ - DRI_CONF_ENUM(1,"Prefer 32 bits per texel") \ - DRI_CONF_ENUM(2,"Prefer 16 bits per texel") \ - DRI_CONF_ENUM(3,"Force 16 bits per texel") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(de,"Texturfarbtiefe") \ - DRI_CONF_ENUM(0,"Bevorzuge Farbtiefe des Framebuffers") \ - DRI_CONF_ENUM(1,"Bevorzuge 32 bits pro Texel") \ - DRI_CONF_ENUM(2,"Bevorzuge 16 bits pro Texel") \ - DRI_CONF_ENUM(3,"Erzwinge 16 bits pro Texel") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(es,"Profundidad de color de textura") \ - DRI_CONF_ENUM(0,"Preferir profundidad de color del ”framebuffer“") \ - DRI_CONF_ENUM(1,"Preferir 32 bits por texel") \ - DRI_CONF_ENUM(2,"Preferir 16 bits por texel") \ - DRI_CONF_ENUM(3,"Forzar a 16 bits por texel") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(nl,"Textuurkleurendiepte") \ - DRI_CONF_ENUM(0,"Prefereer kaderbufferkleurdiepte") \ - DRI_CONF_ENUM(1,"Prefereer 32 bits per texel") \ - DRI_CONF_ENUM(2,"Prefereer 16 bits per texel") \ - DRI_CONF_ENUM(3,"Dwing 16 bits per texel af") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(fr,"Profondeur de texture") \ - DRI_CONF_ENUM(0,"Profondeur de couleur") \ - DRI_CONF_ENUM(1,"Préférer 32 bits par texel") \ - DRI_CONF_ENUM(2,"Prérérer 16 bits par texel") \ - DRI_CONF_ENUM(3,"Forcer 16 bits par texel") \ - DRI_CONF_DESC_END \ -DRI_CONF_OPT_END - -#define DRI_CONF_DEF_MAX_ANISOTROPY(def,range) \ -DRI_CONF_OPT_BEGIN_V(def_max_anisotropy,float,def,range) \ - DRI_CONF_DESC(en,"Initial maximum value for anisotropic texture filtering") \ - DRI_CONF_DESC(de,"Initialer Maximalwert für anisotropische Texturfilterung") \ - DRI_CONF_DESC(es,"Valor máximo inicial para filtrado anisotrópico de textura") \ - DRI_CONF_DESC(nl,"Initïele maximum waarde voor anisotrophische textuur filtering") \ - DRI_CONF_DESC(fr,"Valeur maximale initiale pour le filtrage anisotropique de texture") \ -DRI_CONF_OPT_END - -#define DRI_CONF_NO_NEG_LOD_BIAS(def) \ -DRI_CONF_OPT_BEGIN(no_neg_lod_bias,bool,def) \ - DRI_CONF_DESC(en,"Forbid negative texture LOD bias") \ - DRI_CONF_DESC(de,"Verbiete negative Textur-Detailgradverschiebung") \ - DRI_CONF_DESC(es,"Prohibir valores negativos de Nivel De Detalle (LOD) de texturas") \ - DRI_CONF_DESC(nl,"Verbied negatief niveau detailonderscheid (LOD) van texturen") \ - DRI_CONF_DESC(fr,"Interdire le LOD bias negatif") \ -DRI_CONF_OPT_END - -#define DRI_CONF_FORCE_S3TC_ENABLE(def) \ -DRI_CONF_OPT_BEGIN(force_s3tc_enable,bool,def) \ - DRI_CONF_DESC(en,"Enable S3TC texture compression even if software support is not available") \ - DRI_CONF_DESC(de,"Aktiviere S3TC Texturkomprimierung auch wenn die nötige Softwareunterstützung fehlt") \ - DRI_CONF_DESC(es,"Activar la compresión de texturas S3TC incluso si el soporte por software no está disponible") \ - DRI_CONF_DESC(nl,"Schakel S3TC textuurcompressie in, zelfs als softwareondersteuning niet aanwezig is") \ - DRI_CONF_DESC(fr,"Activer la compression de texture S3TC même si le support logiciel est absent") \ -DRI_CONF_OPT_END - -#define DRI_CONF_COLOR_REDUCTION_ROUND 0 -#define DRI_CONF_COLOR_REDUCTION_DITHER 1 -#define DRI_CONF_COLOR_REDUCTION(def) \ -DRI_CONF_OPT_BEGIN_V(color_reduction,enum,def,"0:1") \ - DRI_CONF_DESC_BEGIN(en,"Initial color reduction method") \ - DRI_CONF_ENUM(0,"Round colors") \ - DRI_CONF_ENUM(1,"Dither colors") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(de,"Initiale Farbreduktionsmethode") \ - DRI_CONF_ENUM(0,"Farben runden") \ - DRI_CONF_ENUM(1,"Farben rastern") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(es,"Método inicial de reducción de color") \ - DRI_CONF_ENUM(0,"Colores redondeados") \ - DRI_CONF_ENUM(1,"Colores suavizados") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(nl,"Initïele kleurreductie methode") \ - DRI_CONF_ENUM(0,"Rond kleuren af") \ - DRI_CONF_ENUM(1,"Rasteriseer kleuren") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(fr,"Technique de réduction de couleurs") \ - DRI_CONF_ENUM(0,"Arrondir les valeurs de couleur") \ - DRI_CONF_ENUM(1,"Tramer les couleurs") \ - DRI_CONF_DESC_END \ -DRI_CONF_OPT_END - -#define DRI_CONF_ROUND_TRUNC 0 -#define DRI_CONF_ROUND_ROUND 1 -#define DRI_CONF_ROUND_MODE(def) \ -DRI_CONF_OPT_BEGIN_V(round_mode,enum,def,"0:1") \ - DRI_CONF_DESC_BEGIN(en,"Color rounding method") \ - DRI_CONF_ENUM(0,"Round color components downward") \ - DRI_CONF_ENUM(1,"Round to nearest color") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(de,"Farbrundungsmethode") \ - DRI_CONF_ENUM(0,"Farbkomponenten abrunden") \ - DRI_CONF_ENUM(1,"Zur ähnlichsten Farbe runden") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(es,"Método de redondeo de colores") \ - DRI_CONF_ENUM(0,"Redondear hacia abajo los componentes de color") \ - DRI_CONF_ENUM(1,"Redondear al color más cercano") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(nl,"Kleurafrondingmethode") \ - DRI_CONF_ENUM(0,"Rond kleurencomponenten af naar beneden") \ - DRI_CONF_ENUM(1,"Rond af naar dichtsbijzijnde kleur") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(fr,"Méthode d'arrondi des couleurs") \ - DRI_CONF_ENUM(0,"Arrondi à l'inférieur") \ - DRI_CONF_ENUM(1,"Arrondi au plus proche") \ - DRI_CONF_DESC_END \ -DRI_CONF_OPT_END - -#define DRI_CONF_DITHER_XERRORDIFF 0 -#define DRI_CONF_DITHER_XERRORDIFFRESET 1 -#define DRI_CONF_DITHER_ORDERED 2 -#define DRI_CONF_DITHER_MODE(def) \ -DRI_CONF_OPT_BEGIN_V(dither_mode,enum,def,"0:2") \ - DRI_CONF_DESC_BEGIN(en,"Color dithering method") \ - DRI_CONF_ENUM(0,"Horizontal error diffusion") \ - DRI_CONF_ENUM(1,"Horizontal error diffusion, reset error at line start") \ - DRI_CONF_ENUM(2,"Ordered 2D color dithering") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(de,"Farbrasterungsmethode") \ - DRI_CONF_ENUM(0,"Horizontale Fehlerstreuung") \ - DRI_CONF_ENUM(1,"Horizontale Fehlerstreuung, Fehler am Zeilenanfang zurücksetzen") \ - DRI_CONF_ENUM(2,"Geordnete 2D Farbrasterung") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(es,"Método de suavizado de color") \ - DRI_CONF_ENUM(0,"Difusión de error horizontal") \ - DRI_CONF_ENUM(1,"Difusión de error horizontal, reiniciar error al comienzo de línea") \ - DRI_CONF_ENUM(2,"Suavizado de color 2D ordenado") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(nl,"Kleurrasteriseringsmethode") \ - DRI_CONF_ENUM(0,"Horizontale foutdiffusie") \ - DRI_CONF_ENUM(1,"Horizontale foutdiffusie, zet fout bij lijnbegin terug") \ - DRI_CONF_ENUM(2,"Geordende 2D kleurrasterisering") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(fr,"Méthode de tramage") \ - DRI_CONF_ENUM(0,"Diffusion d'erreur horizontale") \ - DRI_CONF_ENUM(1,"Diffusion d'erreur horizontale, réinitialisé pour chaque ligne") \ - DRI_CONF_ENUM(2,"Tramage ordonné des couleurs") \ - DRI_CONF_DESC_END \ -DRI_CONF_OPT_END - -#define DRI_CONF_FLOAT_DEPTH(def) \ -DRI_CONF_OPT_BEGIN(float_depth,bool,def) \ - DRI_CONF_DESC(en,"Floating point depth buffer") \ - DRI_CONF_DESC(de,"Fließkomma z-Puffer") \ - DRI_CONF_DESC(es,"Búfer de profundidad en coma flotante") \ - DRI_CONF_DESC(nl,"Dieptebuffer als commagetal") \ - DRI_CONF_DESC(fr,"Z-buffer en virgule flottante") \ -DRI_CONF_OPT_END - -/** \brief Performance-related options */ -#define DRI_CONF_SECTION_PERFORMANCE \ -DRI_CONF_SECTION_BEGIN \ - DRI_CONF_DESC(en,"Performance") \ - DRI_CONF_DESC(de,"Leistung") \ - DRI_CONF_DESC(es,"Rendimiento") \ - DRI_CONF_DESC(nl,"Prestatie") \ - DRI_CONF_DESC(fr,"Performance") - -#define DRI_CONF_TCL_SW 0 -#define DRI_CONF_TCL_PIPELINED 1 -#define DRI_CONF_TCL_VTXFMT 2 -#define DRI_CONF_TCL_CODEGEN 3 -#define DRI_CONF_TCL_MODE(def) \ -DRI_CONF_OPT_BEGIN_V(tcl_mode,enum,def,"0:3") \ - DRI_CONF_DESC_BEGIN(en,"TCL mode (Transformation, Clipping, Lighting)") \ - DRI_CONF_ENUM(0,"Use software TCL pipeline") \ - DRI_CONF_ENUM(1,"Use hardware TCL as first TCL pipeline stage") \ - DRI_CONF_ENUM(2,"Bypass the TCL pipeline") \ - DRI_CONF_ENUM(3,"Bypass the TCL pipeline with state-based machine code generated on-the-fly") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(de,"TCL-Modus (Transformation, Clipping, Licht)") \ - DRI_CONF_ENUM(0,"Benutze die Software-TCL-Pipeline") \ - DRI_CONF_ENUM(1,"Benutze Hardware TCL als erste Stufe der TCL-Pipeline") \ - DRI_CONF_ENUM(2,"Umgehe die TCL-Pipeline") \ - DRI_CONF_ENUM(3,"Umgehe die TCL-Pipeline mit zur Laufzeit erzeugtem, zustandsbasiertem Maschinencode") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(es,"Modo TCL (Transformación, Recorte, Iluminación)") \ - DRI_CONF_ENUM(0,"Usar tubería TCL por software") \ - DRI_CONF_ENUM(1,"Usar TCL por hardware en la primera fase de la tubería TCL") \ - DRI_CONF_ENUM(2,"Pasar por alto la tubería TCL") \ - DRI_CONF_ENUM(3,"Pasar por alto la tubería TCL con código máquina basado en estados generado al vuelo") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(nl,"TCL-modus (Transformatie, Clipping, Licht)") \ - DRI_CONF_ENUM(0,"Gebruik software TCL pijpleiding") \ - DRI_CONF_ENUM(1,"Gebruik hardware TCL as eerste TCL pijpleiding trap") \ - DRI_CONF_ENUM(2,"Omzeil de TCL pijpleiding") \ - DRI_CONF_ENUM(3,"Omzeil de TCL pijpleiding met staatgebaseerde machinecode die tijdens executie gegenereerd wordt") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(fr,"Mode de TCL (Transformation, Clipping, Eclairage)") \ - DRI_CONF_ENUM(0,"Utiliser un pipeline TCL logiciel") \ - DRI_CONF_ENUM(1,"Utiliser le TCL matériel pour le premier niveau de pipeline") \ - DRI_CONF_ENUM(2,"Court-circuiter le pipeline TCL") \ - DRI_CONF_ENUM(3,"Court-circuiter le pipeline TCL par une machine à états qui génère le codede TCL à la volée") \ - DRI_CONF_DESC_END \ -DRI_CONF_OPT_END - -#define DRI_CONF_FTHROTTLE_BUSY 0 -#define DRI_CONF_FTHROTTLE_USLEEPS 1 -#define DRI_CONF_FTHROTTLE_IRQS 2 -#define DRI_CONF_FTHROTTLE_MODE(def) \ -DRI_CONF_OPT_BEGIN_V(fthrottle_mode,enum,def,"0:2") \ - DRI_CONF_DESC_BEGIN(en,"Method to limit rendering latency") \ - DRI_CONF_ENUM(0,"Busy waiting for the graphics hardware") \ - DRI_CONF_ENUM(1,"Sleep for brief intervals while waiting for the graphics hardware") \ - DRI_CONF_ENUM(2,"Let the graphics hardware emit a software interrupt and sleep") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(de,"Methode zur Begrenzung der Bildverzögerung") \ - DRI_CONF_ENUM(0,"Aktives Warten auf die Grafikhardware") \ - DRI_CONF_ENUM(1,"Kurze Schlafintervalle beim Warten auf die Grafikhardware") \ - DRI_CONF_ENUM(2,"Die Grafikhardware eine Softwareunterbrechnung erzeugen lassen und schlafen") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(es,"Método para limitar la latencia de rénder") \ - DRI_CONF_ENUM(0,"Esperar activamente al hardware gráfico") \ - DRI_CONF_ENUM(1,"Dormir en intervalos cortos mientras se espera al hardware gráfico") \ - DRI_CONF_ENUM(2,"Permitir que el hardware gráfico emita una interrupción de software y duerma") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(nl,"Methode om beeldopbouwvertraging te onderdrukken") \ - DRI_CONF_ENUM(0,"Actief wachten voor de grafische hardware") \ - DRI_CONF_ENUM(1,"Slaap voor korte intervallen tijdens het wachten op de grafische hardware") \ - DRI_CONF_ENUM(2,"Laat de grafische hardware een software onderbreking uitzenden en in slaap vallen") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(fr,"Méthode d'attente de la carte graphique") \ - DRI_CONF_ENUM(0,"Attente active de la carte graphique") \ - DRI_CONF_ENUM(1,"Attente utilisant usleep()") \ - DRI_CONF_ENUM(2,"Utiliser les interruptions") \ - DRI_CONF_DESC_END \ -DRI_CONF_OPT_END - -#define DRI_CONF_VBLANK_NEVER 0 -#define DRI_CONF_VBLANK_DEF_INTERVAL_0 1 -#define DRI_CONF_VBLANK_DEF_INTERVAL_1 2 -#define DRI_CONF_VBLANK_ALWAYS_SYNC 3 -#define DRI_CONF_VBLANK_MODE(def) \ -DRI_CONF_OPT_BEGIN_V(vblank_mode,enum,def,"0:3") \ - DRI_CONF_DESC_BEGIN(en,"Synchronization with vertical refresh (swap intervals)") \ - DRI_CONF_ENUM(0,"Never synchronize with vertical refresh, ignore application's choice") \ - DRI_CONF_ENUM(1,"Initial swap interval 0, obey application's choice") \ - DRI_CONF_ENUM(2,"Initial swap interval 1, obey application's choice") \ - DRI_CONF_ENUM(3,"Always synchronize with vertical refresh, application chooses the minimum swap interval") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(de,"Synchronisation mit der vertikalen Bildwiederholung") \ - DRI_CONF_ENUM(0,"Niemals mit der Bildwiederholung synchronisieren, Anweisungen der Anwendung ignorieren") \ - DRI_CONF_ENUM(1,"Initiales Bildinterval 0, Anweisungen der Anwendung gehorchen") \ - DRI_CONF_ENUM(2,"Initiales Bildinterval 1, Anweisungen der Anwendung gehorchen") \ - DRI_CONF_ENUM(3,"Immer mit der Bildwiederholung synchronisieren, Anwendung wählt das minmale Bildinterval") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(es,"Sincronización con el refresco vertical (intervalos de intercambio)") \ - DRI_CONF_ENUM(0,"No sincronizar nunca con el refresco vertical, ignorar la elección de la aplicación") \ - DRI_CONF_ENUM(1,"Intervalo de intercambio inicial 0, obedecer la elección de la aplicación") \ - DRI_CONF_ENUM(2,"Intervalo de intercambio inicial 1, obedecer la elección de la aplicación") \ - DRI_CONF_ENUM(3,"Sincronizar siempre con el refresco vertical, la aplicación elige el intervalo de intercambio mínimo") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(nl,"Synchronisatie met verticale verversing (interval omwisselen)") \ - DRI_CONF_ENUM(0,"Nooit synchroniseren met verticale verversing, negeer de keuze van de applicatie") \ - DRI_CONF_ENUM(1,"Initïeel omwisselingsinterval 0, honoreer de keuze van de applicatie") \ - DRI_CONF_ENUM(2,"Initïeel omwisselingsinterval 1, honoreer de keuze van de applicatie") \ - DRI_CONF_ENUM(3,"Synchroniseer altijd met verticale verversing, de applicatie kiest het minimum omwisselingsinterval") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(fr,"Synchronisation de l'affichage avec le balayage vertical") \ - DRI_CONF_ENUM(0,"Ne jamais synchroniser avec le balayage vertical, ignorer le choix de l'application") \ - DRI_CONF_ENUM(1,"Ne pas synchroniser avec le balayage vertical par défaut, mais obéir au choix de l'application") \ - DRI_CONF_ENUM(2,"Synchroniser avec le balayage vertical par défaut, mais obéir au choix de l'application") \ - DRI_CONF_ENUM(3,"Toujours synchroniser avec le balayage vertical, l'application choisit l'intervalle minimal") \ - DRI_CONF_DESC_END \ -DRI_CONF_OPT_END - -#define DRI_CONF_HYPERZ_DISABLED 0 -#define DRI_CONF_HYPERZ_ENABLED 1 -#define DRI_CONF_HYPERZ(def) \ -DRI_CONF_OPT_BEGIN(hyperz,bool,def) \ - DRI_CONF_DESC(en,"Use HyperZ to boost performance") \ - DRI_CONF_DESC(de,"HyperZ zur Leistungssteigerung verwenden") \ - DRI_CONF_DESC(es,"Usar HyperZ para potenciar rendimiento") \ - DRI_CONF_DESC(nl,"Gebruik HyperZ om de prestaties te verbeteren") \ - DRI_CONF_DESC(fr,"Utiliser le HyperZ pour améliorer les performances") \ -DRI_CONF_OPT_END - -#define DRI_CONF_MAX_TEXTURE_UNITS(def,min,max) \ -DRI_CONF_OPT_BEGIN_V(texture_units,int,def, # min ":" # max ) \ - DRI_CONF_DESC(en,"Number of texture units used") \ - DRI_CONF_DESC(de,"Anzahl der benutzten Textureinheiten") \ - DRI_CONF_DESC(es,"Número de unidades de textura usadas") \ - DRI_CONF_DESC(nl,"Aantal textuureenheden in gebruik") \ - DRI_CONF_DESC(fr,"Nombre d'unités de texture") \ -DRI_CONF_OPT_END - -#define DRI_CONF_TEXTURE_LEVEL_HACK(def) \ -DRI_CONF_OPT_BEGIN(texture_level_hack,bool,def) \ - DRI_CONF_DESC(en,"Enable hack to allow larger textures with texture compression on radeon/r200") \ - DRI_CONF_DESC(de,"Hack aktivieren, der mit Texturkompression auf radeon/r200 größere Texturen erlaubt") \ - DRI_CONF_DESC(es,"Activar ”hack“ para permitir texturas más grandes con compresión de textura activada en la Radeon/r200") \ - DRI_CONF_DESC(nl,"Schakel hack in om met textuurcompressie grotere texturen toe te staan op een radeon/r200") \ - DRI_CONF_DESC(fr,"Activer le hack permettant l'utilisation de textures de grande taille avec la compression de textures sur radeon/r200") \ -DRI_CONF_OPT_END - -#define DRI_CONF_TEXTURE_BLEND_QUALITY(def,range) \ -DRI_CONF_OPT_BEGIN_V(texture_blend_quality,float,def,range) \ - DRI_CONF_DESC(en,"Texture filtering quality vs. speed, AKA “brilinear” texture filtering") \ - DRI_CONF_DESC(de,"Texturfilterqualität versus -geschwindigkeit, auch bekannt als „brilineare“ Texturfilterung") \ - DRI_CONF_DESC(es,"Calidad de filtrado de textura vs. velocidad, alias filtrado ”brilinear“ de textura") \ - DRI_CONF_DESC(nl,"Textuurfilterkwaliteit versus -snelheid, ookwel bekend als “brilineaire” textuurfiltering") \ - DRI_CONF_DESC(fr,"Qualité/performance du filtrage trilinéaire de texture (filtrage brilinéaire)") \ -DRI_CONF_OPT_END - -#define DRI_CONF_TEXTURE_HEAPS_ALL 0 -#define DRI_CONF_TEXTURE_HEAPS_CARD 1 -#define DRI_CONF_TEXTURE_HEAPS_GART 2 -#define DRI_CONF_TEXTURE_HEAPS(def) \ -DRI_CONF_OPT_BEGIN_V(texture_heaps,enum,def,"0:2") \ - DRI_CONF_DESC_BEGIN(en,"Used types of texture memory") \ - DRI_CONF_ENUM(0,"All available memory") \ - DRI_CONF_ENUM(1,"Only card memory (if available)") \ - DRI_CONF_ENUM(2,"Only GART (AGP/PCIE) memory (if available)") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(de,"Benutzte Arten von Texturspeicher") \ - DRI_CONF_ENUM(0,"Aller verfügbarer Speicher") \ - DRI_CONF_ENUM(1,"Nur Grafikspeicher (falls verfügbar)") \ - DRI_CONF_ENUM(2,"Nur GART-Speicher (AGP/PCIE) (falls verfügbar)") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(es,"Tipos de memoria de textura usados") \ - DRI_CONF_ENUM(0,"Toda la memoria disponible") \ - DRI_CONF_ENUM(1,"Sólo la memoria de la tarjeta (si disponible)") \ - DRI_CONF_ENUM(2,"Sólo memoria GART (AGP/PCIE) (si disponible)") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(nl,"Gebruikte soorten textuurgeheugen") \ - DRI_CONF_ENUM(0,"Al het beschikbaar geheugen") \ - DRI_CONF_ENUM(1,"Alleen geheugen op de kaart (als het aanwezig is)") \ - DRI_CONF_ENUM(2,"Alleen GART (AGP/PCIE) geheugen (als het aanwezig is)") \ - DRI_CONF_DESC_END \ - DRI_CONF_DESC_BEGIN(fr,"Types de mémoire de texture") \ - DRI_CONF_ENUM(0,"Utiliser toute la mémoire disponible") \ - DRI_CONF_ENUM(1,"Utiliser uniquement la mémoire graphique (si disponible)") \ - DRI_CONF_ENUM(2,"Utiliser uniquement la mémoire GART (AGP/PCIE) (si disponible)") \ - DRI_CONF_DESC_END \ -DRI_CONF_OPT_END - -/* Options for features that are not done in hardware by the driver (like GL_ARB_vertex_program - On cards where there is no documentation (r200) or on rasterization-only hardware). */ -#define DRI_CONF_SECTION_SOFTWARE \ -DRI_CONF_SECTION_BEGIN \ - DRI_CONF_DESC(en,"Features that are not hardware-accelerated") \ - DRI_CONF_DESC(de,"Funktionalität, die nicht hardwarebeschleunigt ist") \ - DRI_CONF_DESC(es,"Características no aceleradas por hardware") \ - DRI_CONF_DESC(nl,"Eigenschappen die niet hardwareversneld zijn") \ - DRI_CONF_DESC(fr,"Fonctionnalités ne bénéficiant pas d'une accélération matérielle") - -#define DRI_CONF_ARB_VERTEX_PROGRAM(def) \ -DRI_CONF_OPT_BEGIN(arb_vertex_program,bool,def) \ - DRI_CONF_DESC(en,"Enable extension GL_ARB_vertex_program") \ - DRI_CONF_DESC(de,"Erweiterung GL_ARB_vertex_program aktivieren") \ - DRI_CONF_DESC(es,"Activar la extensión GL_ARB_vertex_program") \ - DRI_CONF_DESC(nl,"Zet uitbreiding GL_ARB_vertex_program aan") \ - DRI_CONF_DESC(fr,"Activer l'extension GL_ARB_vertex_program") \ -DRI_CONF_OPT_END - -#define DRI_CONF_NV_VERTEX_PROGRAM(def) \ -DRI_CONF_OPT_BEGIN(nv_vertex_program,bool,def) \ - DRI_CONF_DESC(en,"Enable extension GL_NV_vertex_program") \ - DRI_CONF_DESC(de,"Erweiterung GL_NV_vertex_program aktivieren") \ - DRI_CONF_DESC(es,"Activar extensión GL_NV_vertex_program") \ - DRI_CONF_DESC(nl,"Zet uitbreiding GL_NV_vertex_program aan") \ - DRI_CONF_DESC(fr,"Activer l'extension GL_NV_vertex_program") \ -DRI_CONF_OPT_END diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/t_options.h b/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/t_options.h deleted file mode 100644 index ab9245ee2..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/common/xmlpool/t_options.h +++ /dev/null @@ -1,230 +0,0 @@ -/* - * XML DRI client-side driver configuration - * Copyright (C) 2003 Felix Kuehling - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included - * in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * FELIX KUEHLING, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM, - * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR - * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE - * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - */ -/** - * \file t_options.h - * \brief Templates of common options - * \author Felix Kuehling - * - * This file defines macros for common options that can be used to - * construct driConfigOptions in the drivers. This file is only a - * template containing English descriptions for options wrapped in - * gettext(). xgettext can be used to extract translatable - * strings. These strings can then be translated by anyone familiar - * with GNU gettext. gen_xmlpool.py takes this template and fills in - * all the translations. The result (options.h) is included by - * xmlpool.h which in turn can be included by drivers. - * - * The macros used to describe otions in this file are defined in - * ../xmlpool.h. - */ - -/* This is needed for xgettext to extract translatable strings. - * gen_xmlpool.py will discard this line. */ -#include <libintl.h> - -/* - * predefined option sections and options with multi-lingual descriptions - */ - -/** \brief Debugging options */ -#define DRI_CONF_SECTION_DEBUG \ -DRI_CONF_SECTION_BEGIN \ - DRI_CONF_DESC(en,gettext("Debugging")) - -#define DRI_CONF_NO_RAST(def) \ -DRI_CONF_OPT_BEGIN(no_rast,bool,def) \ - DRI_CONF_DESC(en,gettext("Disable 3D acceleration")) \ -DRI_CONF_OPT_END - -#define DRI_CONF_PERFORMANCE_BOXES(def) \ -DRI_CONF_OPT_BEGIN(performance_boxes,bool,def) \ - DRI_CONF_DESC(en,gettext("Show performance boxes")) \ -DRI_CONF_OPT_END - - -/** \brief Texture-related options */ -#define DRI_CONF_SECTION_QUALITY \ -DRI_CONF_SECTION_BEGIN \ - DRI_CONF_DESC(en,gettext("Image Quality")) - -#define DRI_CONF_TEXTURE_DEPTH_FB 0 -#define DRI_CONF_TEXTURE_DEPTH_32 1 -#define DRI_CONF_TEXTURE_DEPTH_16 2 -#define DRI_CONF_TEXTURE_DEPTH_FORCE_16 3 -#define DRI_CONF_TEXTURE_DEPTH(def) \ -DRI_CONF_OPT_BEGIN_V(texture_depth,enum,def,"0:3") \ - DRI_CONF_DESC_BEGIN(en,gettext("Texture color depth")) \ - DRI_CONF_ENUM(0,gettext("Prefer frame buffer color depth")) \ - DRI_CONF_ENUM(1,gettext("Prefer 32 bits per texel")) \ - DRI_CONF_ENUM(2,gettext("Prefer 16 bits per texel")) \ - DRI_CONF_ENUM(3,gettext("Force 16 bits per texel")) \ - DRI_CONF_DESC_END \ -DRI_CONF_OPT_END - -#define DRI_CONF_DEF_MAX_ANISOTROPY(def,range) \ -DRI_CONF_OPT_BEGIN_V(def_max_anisotropy,float,def,range) \ - DRI_CONF_DESC(en,gettext("Initial maximum value for anisotropic texture filtering")) \ -DRI_CONF_OPT_END - -#define DRI_CONF_NO_NEG_LOD_BIAS(def) \ -DRI_CONF_OPT_BEGIN(no_neg_lod_bias,bool,def) \ - DRI_CONF_DESC(en,gettext("Forbid negative texture LOD bias")) \ -DRI_CONF_OPT_END - -#define DRI_CONF_FORCE_S3TC_ENABLE(def) \ -DRI_CONF_OPT_BEGIN(force_s3tc_enable,bool,def) \ - DRI_CONF_DESC(en,gettext("Enable S3TC texture compression even if software support is not available")) \ -DRI_CONF_OPT_END - -#define DRI_CONF_COLOR_REDUCTION_ROUND 0 -#define DRI_CONF_COLOR_REDUCTION_DITHER 1 -#define DRI_CONF_COLOR_REDUCTION(def) \ -DRI_CONF_OPT_BEGIN_V(color_reduction,enum,def,"0:1") \ - DRI_CONF_DESC_BEGIN(en,gettext("Initial color reduction method")) \ - DRI_CONF_ENUM(0,gettext("Round colors")) \ - DRI_CONF_ENUM(1,gettext("Dither colors")) \ - DRI_CONF_DESC_END \ -DRI_CONF_OPT_END - -#define DRI_CONF_ROUND_TRUNC 0 -#define DRI_CONF_ROUND_ROUND 1 -#define DRI_CONF_ROUND_MODE(def) \ -DRI_CONF_OPT_BEGIN_V(round_mode,enum,def,"0:1") \ - DRI_CONF_DESC_BEGIN(en,gettext("Color rounding method")) \ - DRI_CONF_ENUM(0,gettext("Round color components downward")) \ - DRI_CONF_ENUM(1,gettext("Round to nearest color")) \ - DRI_CONF_DESC_END \ -DRI_CONF_OPT_END - -#define DRI_CONF_DITHER_XERRORDIFF 0 -#define DRI_CONF_DITHER_XERRORDIFFRESET 1 -#define DRI_CONF_DITHER_ORDERED 2 -#define DRI_CONF_DITHER_MODE(def) \ -DRI_CONF_OPT_BEGIN_V(dither_mode,enum,def,"0:2") \ - DRI_CONF_DESC_BEGIN(en,gettext("Color dithering method")) \ - DRI_CONF_ENUM(0,gettext("Horizontal error diffusion")) \ - DRI_CONF_ENUM(1,gettext("Horizontal error diffusion, reset error at line start")) \ - DRI_CONF_ENUM(2,gettext("Ordered 2D color dithering")) \ - DRI_CONF_DESC_END \ -DRI_CONF_OPT_END - -#define DRI_CONF_FLOAT_DEPTH(def) \ -DRI_CONF_OPT_BEGIN(float_depth,bool,def) \ - DRI_CONF_DESC(en,gettext("Floating point depth buffer")) \ -DRI_CONF_OPT_END - -/** \brief Performance-related options */ -#define DRI_CONF_SECTION_PERFORMANCE \ -DRI_CONF_SECTION_BEGIN \ - DRI_CONF_DESC(en,gettext("Performance")) - -#define DRI_CONF_TCL_SW 0 -#define DRI_CONF_TCL_PIPELINED 1 -#define DRI_CONF_TCL_VTXFMT 2 -#define DRI_CONF_TCL_CODEGEN 3 -#define DRI_CONF_TCL_MODE(def) \ -DRI_CONF_OPT_BEGIN_V(tcl_mode,enum,def,"0:3") \ - DRI_CONF_DESC_BEGIN(en,gettext("TCL mode (Transformation, Clipping, Lighting)")) \ - DRI_CONF_ENUM(0,gettext("Use software TCL pipeline")) \ - DRI_CONF_ENUM(1,gettext("Use hardware TCL as first TCL pipeline stage")) \ - DRI_CONF_ENUM(2,gettext("Bypass the TCL pipeline")) \ - DRI_CONF_ENUM(3,gettext("Bypass the TCL pipeline with state-based machine code generated on-the-fly")) \ - DRI_CONF_DESC_END \ -DRI_CONF_OPT_END - -#define DRI_CONF_FTHROTTLE_BUSY 0 -#define DRI_CONF_FTHROTTLE_USLEEPS 1 -#define DRI_CONF_FTHROTTLE_IRQS 2 -#define DRI_CONF_FTHROTTLE_MODE(def) \ -DRI_CONF_OPT_BEGIN_V(fthrottle_mode,enum,def,"0:2") \ - DRI_CONF_DESC_BEGIN(en,gettext("Method to limit rendering latency")) \ - DRI_CONF_ENUM(0,gettext("Busy waiting for the graphics hardware")) \ - DRI_CONF_ENUM(1,gettext("Sleep for brief intervals while waiting for the graphics hardware")) \ - DRI_CONF_ENUM(2,gettext("Let the graphics hardware emit a software interrupt and sleep")) \ - DRI_CONF_DESC_END \ -DRI_CONF_OPT_END - -#define DRI_CONF_VBLANK_NEVER 0 -#define DRI_CONF_VBLANK_DEF_INTERVAL_0 1 -#define DRI_CONF_VBLANK_DEF_INTERVAL_1 2 -#define DRI_CONF_VBLANK_ALWAYS_SYNC 3 -#define DRI_CONF_VBLANK_MODE(def) \ -DRI_CONF_OPT_BEGIN_V(vblank_mode,enum,def,"0:3") \ - DRI_CONF_DESC_BEGIN(en,gettext("Synchronization with vertical refresh (swap intervals)")) \ - DRI_CONF_ENUM(0,gettext("Never synchronize with vertical refresh, ignore application's choice")) \ - DRI_CONF_ENUM(1,gettext("Initial swap interval 0, obey application's choice")) \ - DRI_CONF_ENUM(2,gettext("Initial swap interval 1, obey application's choice")) \ - DRI_CONF_ENUM(3,gettext("Always synchronize with vertical refresh, application chooses the minimum swap interval")) \ - DRI_CONF_DESC_END \ -DRI_CONF_OPT_END - -#define DRI_CONF_HYPERZ_DISABLED 0 -#define DRI_CONF_HYPERZ_ENABLED 1 -#define DRI_CONF_HYPERZ(def) \ -DRI_CONF_OPT_BEGIN(hyperz,bool,def) \ - DRI_CONF_DESC(en,gettext("Use HyperZ to boost performance")) \ -DRI_CONF_OPT_END - -#define DRI_CONF_MAX_TEXTURE_UNITS(def,min,max) \ -DRI_CONF_OPT_BEGIN_V(texture_units,int,def, # min ":" # max ) \ - DRI_CONF_DESC(en,gettext("Number of texture units used")) \ -DRI_CONF_OPT_END - -#define DRI_CONF_TEXTURE_LEVEL_HACK(def) \ -DRI_CONF_OPT_BEGIN(texture_level_hack,bool,def) \ - DRI_CONF_DESC(en,gettext("Enable hack to allow larger textures with texture compression on radeon/r200")) \ -DRI_CONF_OPT_END - -#define DRI_CONF_TEXTURE_BLEND_QUALITY(def,range) \ -DRI_CONF_OPT_BEGIN_V(texture_blend_quality,float,def,range) \ - DRI_CONF_DESC(en,gettext("Texture filtering quality vs. speed, AKA “brilinear” texture filtering")) \ -DRI_CONF_OPT_END - -#define DRI_CONF_TEXTURE_HEAPS_ALL 0 -#define DRI_CONF_TEXTURE_HEAPS_CARD 1 -#define DRI_CONF_TEXTURE_HEAPS_GART 2 -#define DRI_CONF_TEXTURE_HEAPS(def) \ -DRI_CONF_OPT_BEGIN_V(texture_heaps,enum,def,"0:2") \ - DRI_CONF_DESC_BEGIN(en,gettext("Used types of texture memory")) \ - DRI_CONF_ENUM(0,gettext("All available memory")) \ - DRI_CONF_ENUM(1,gettext("Only card memory (if available)")) \ - DRI_CONF_ENUM(2,gettext("Only GART (AGP/PCIE) memory (if available)")) \ - DRI_CONF_DESC_END \ -DRI_CONF_OPT_END - -/* Options for features that are not done in hardware by the driver (like GL_ARB_vertex_program - On cards where there is no documentation (r200) or on rasterization-only hardware). */ -#define DRI_CONF_SECTION_SOFTWARE \ -DRI_CONF_SECTION_BEGIN \ - DRI_CONF_DESC(en,gettext("Features that are not hardware-accelerated")) - -#define DRI_CONF_ARB_VERTEX_PROGRAM(def) \ -DRI_CONF_OPT_BEGIN(arb_vertex_program,bool,def) \ - DRI_CONF_DESC(en,gettext("Enable extension GL_ARB_vertex_program")) \ -DRI_CONF_OPT_END - -#define DRI_CONF_NV_VERTEX_PROGRAM(def) \ -DRI_CONF_OPT_BEGIN(nv_vertex_program,bool,def) \ - DRI_CONF_DESC(en,gettext("Enable extension GL_NV_vertex_program")) \ -DRI_CONF_OPT_END |