diff options
Diffstat (limited to 'nx-X11/extras/Mesa/src/mesa/drivers/dri/r300/r300_emit.h')
| -rw-r--r-- | nx-X11/extras/Mesa/src/mesa/drivers/dri/r300/r300_emit.h | 282 |
1 files changed, 0 insertions, 282 deletions
diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/r300/r300_emit.h b/nx-X11/extras/Mesa/src/mesa/drivers/dri/r300/r300_emit.h deleted file mode 100644 index c7cb93d0a..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/r300/r300_emit.h +++ /dev/null @@ -1,282 +0,0 @@ -#ifndef __EMIT_H__ -#define __EMIT_H__ -#include "glheader.h" -#include "r300_context.h" -#include "r300_cmdbuf.h" - -/* convenience macros */ -#define RADEON_CP_PACKET0 0x00000000 -#define RADEON_CP_PACKET1 0x40000000 -#define RADEON_CP_PACKET2 0x80000000 -#define RADEON_CP_PACKET3 0xC0000000 - -#define RADEON_CP_PACKET3_NOP 0xC0001000 -#define RADEON_CP_PACKET3_NEXT_CHAR 0xC0001900 -#define RADEON_CP_PACKET3_UNK1B 0xC0001B00 -#define RADEON_CP_PACKET3_PLY_NEXTSCAN 0xC0001D00 -#define RADEON_CP_PACKET3_SET_SCISSORS 0xC0001E00 -#define RADEON_CP_PACKET3_3D_RNDR_GEN_INDX_PRIM 0xC0002300 -#define RADEON_CP_PACKET3_LOAD_MICROCODE 0xC0002400 -#define RADEON_CP_PACKET3_WAIT_FOR_IDLE 0xC0002600 -#define RADEON_CP_PACKET3_3D_DRAW_VBUF 0xC0002800 -#define RADEON_CP_PACKET3_3D_DRAW_IMMD 0xC0002900 -#define RADEON_CP_PACKET3_3D_DRAW_INDX 0xC0002A00 -#define RADEON_CP_PACKET3_LOAD_PALETTE 0xC0002C00 -#define RADEON_CP_PACKET3_INDX_BUFFER 0xC0003300 -#define RADEON_CP_PACKET3_3D_DRAW_VBUF_2 0xC0003400 -#define RADEON_CP_PACKET3_3D_DRAW_IMMD_2 0xC0003500 -#define RADEON_CP_PACKET3_3D_DRAW_INDX_2 0xC0003600 -#define RADEON_CP_PACKET3_3D_LOAD_VBPNTR 0xC0002F00 -#define RADEON_CP_PACKET3_CNTL_PAINT 0xC0009100 -#define RADEON_CP_PACKET3_CNTL_BITBLT 0xC0009200 -#define RADEON_CP_PACKET3_CNTL_SMALLTEXT 0xC0009300 -#define RADEON_CP_PACKET3_CNTL_HOSTDATA_BLT 0xC0009400 -#define RADEON_CP_PACKET3_CNTL_POLYLINE 0xC0009500 -#define RADEON_CP_PACKET3_CNTL_POLYSCANLINES 0xC0009800 -#define RADEON_CP_PACKET3_CNTL_PAINT_MULTI 0xC0009A00 -#define RADEON_CP_PACKET3_CNTL_BITBLT_MULTI 0xC0009B00 -#define RADEON_CP_PACKET3_CNTL_TRANS_BITBLT 0xC0009C00 -#define RADEON_CP_PACKET3_3D_CLEAR_ZMASK 0xC0003202 -#define RADEON_CP_PACKET3_3D_CLEAR_CMASK 0xC0003802 -#define RADEON_CP_PACKET3_3D_CLEAR_HIZ 0xC0003702 - -#define CP_PACKET0(reg, n) (RADEON_CP_PACKET0 | ((n)<<16) | ((reg)>>2)) - -/* Glue to R300 Mesa driver */ -#define LOCAL_VARS int cmd_reserved=0;\ - int cmd_written=0; \ - drm_radeon_cmd_header_t *cmd=NULL; - -#define PREFIX_VOID r300ContextPtr rmesa - -#define PREFIX PREFIX_VOID , - -#define PASS_PREFIX_VOID rmesa -#define PASS_PREFIX rmesa , - -typedef GLuint CARD32; - -/* This files defines functions for accessing R300 hardware. - It needs to be customized to whatever code r300_lib.c is used - in */ - -void static inline check_space(int dwords) -{ -} - -static __inline__ uint32_t cmdpacket0(int reg, int count) -{ - drm_r300_cmd_header_t cmd; - - cmd.packet0.cmd_type = R300_CMD_PACKET0; - cmd.packet0.count = count; - cmd.packet0.reghi = ((unsigned int)reg & 0xFF00) >> 8; - cmd.packet0.reglo = ((unsigned int)reg & 0x00FF); - - return cmd.u; -} - -static __inline__ uint32_t cmdvpu(int addr, int count) -{ - drm_r300_cmd_header_t cmd; - - cmd.vpu.cmd_type = R300_CMD_VPU; - cmd.vpu.count = count; - cmd.vpu.adrhi = ((unsigned int)addr & 0xFF00) >> 8; - cmd.vpu.adrlo = ((unsigned int)addr & 0x00FF); - - return cmd.u; -} - -static __inline__ uint32_t cmdpacket3(int packet) -{ - drm_r300_cmd_header_t cmd; - - cmd.packet3.cmd_type = R300_CMD_PACKET3; - cmd.packet3.packet = packet; - - return cmd.u; -} - -static __inline__ uint32_t cmdcpdelay(unsigned short count) -{ - drm_r300_cmd_header_t cmd; - - cmd.delay.cmd_type = R300_CMD_CP_DELAY; - cmd.delay.count = count; - - return cmd.u; -} - -static __inline__ uint32_t cmdwait(unsigned char flags) -{ - drm_r300_cmd_header_t cmd; - - cmd.wait.cmd_type = R300_CMD_WAIT; - cmd.wait.flags = flags; - - return cmd.u; -} - -static __inline__ uint32_t cmdpacify(void) -{ - drm_r300_cmd_header_t cmd; - - cmd.header.cmd_type = R300_CMD_END3D; - - return cmd.u; -} - -/* Prepare to write a register value to register at address reg. - If num_extra > 0 then the following extra values are written - to registers with address +4, +8 and so on.. */ -#define reg_start(reg, num_extra) \ - { \ - int _n; \ - _n=(num_extra); \ - cmd=(drm_radeon_cmd_header_t *) r300AllocCmdBuf(rmesa, \ - (_n+2), \ - __FUNCTION__); \ - cmd_reserved=_n+2; \ - cmd_written=1; \ - cmd[0].i=cmdpacket0((reg), _n+1); \ - } - -/* Prepare to write a register value to register at address reg. - If num_extra > 0 then the following extra values are written - into the same register. */ -/* It is here to permit r300_lib to compile and link anyway, but - complain if actually called */ -#define reg_start_pump(reg, num_extra) \ - { \ - fprintf(stderr, "I am not defined.. Error ! in %s::%s at line %d\n", \ - __FILE__, __FUNCTION__, __LINE__); \ - exit(-1); \ - } - -/* Emit CARD32 freestyle*/ -#define e32(dword) { \ - if(cmd_written<cmd_reserved){\ - cmd[cmd_written].i=(dword); \ - cmd_written++; \ - } else { \ - fprintf(stderr, "e32 but no previous packet declaration.. Aborting! in %s::%s at line %d, cmd_written=%d cmd_reserved=%d\n", \ - __FILE__, __FUNCTION__, __LINE__, cmd_written, cmd_reserved); \ - exit(-1); \ - } \ - } - -#define efloat(f) e32(r300PackFloat32(f)) - -#define vsf_start_fragment(dest, length) \ - { \ - int _n; \ - _n=(length); \ - cmd=(drm_radeon_cmd_header_t *) r300AllocCmdBuf(rmesa, \ - (_n+1), \ - __FUNCTION__); \ - cmd_reserved=_n+2; \ - cmd_written=1; \ - cmd[0].i=cmdvpu((dest), _n/4); \ - } - -#define start_packet3(packet, count) \ - { \ - int _n; \ - CARD32 _p; \ - _n=(count); \ - _p=(packet); \ - cmd=(drm_radeon_cmd_header_t *) r300AllocCmdBuf(rmesa, \ - (_n+3), \ - __FUNCTION__); \ - cmd_reserved=_n+3; \ - cmd_written=2; \ - if(_n>0x3fff) {\ - fprintf(stderr,"Too big packet3 %08x: cannot store %d dwords\n", \ - _p, _n); \ - exit(-1); \ - } \ - cmd[0].i=cmdpacket3(R300_CMD_PACKET3_RAW); \ - cmd[1].i=_p | ((_n & 0x3fff)<<16); \ - } - - /* must be sent to switch to 2d commands */ - -void static inline end_3d(PREFIX_VOID) -{ -LOCAL_VARS -(void)cmd_reserved; (void)cmd_written; - -cmd=(drm_radeon_cmd_header_t *) r300AllocCmdBuf(rmesa, \ - 1, \ - __FUNCTION__); \ - -cmd[0].header.cmd_type=R300_CMD_END3D; -} - -void static inline cp_delay(PREFIX unsigned short count) -{ -LOCAL_VARS -(void)cmd_reserved; (void)cmd_written; - -cmd=(drm_radeon_cmd_header_t *) r300AllocCmdBuf(rmesa, \ - 1, \ - __FUNCTION__); \ - -cmd[0].i=cmdcpdelay(count); -} - -void static inline cp_wait(PREFIX unsigned char flags) -{ -LOCAL_VARS -(void)cmd_reserved; (void)cmd_written; - -cmd=(drm_radeon_cmd_header_t *) r300AllocCmdBuf(rmesa, \ - 1, \ - __FUNCTION__); \ - -cmd[0].i=cmdwait(flags); -} - -/* fire vertex buffer */ -static void inline fire_AOS(PREFIX int vertex_count, int type) -{ -LOCAL_VARS -check_space(9); - -start_packet3(RADEON_CP_PACKET3_3D_DRAW_VBUF_2, 0); -/* e32(0x840c0024); */ - e32(R300_VAP_VF_CNTL__PRIM_WALK_VERTEX_LIST | (vertex_count<<16) | type); -} - -/* these are followed by the corresponding data */ -#define start_index32_packet(vertex_count, type) \ - {\ - int _vc;\ - _vc=(vertex_count); \ - start_packet3(RADEON_CP_PACKET3_3D_DRAW_INDX_2, _vc); \ - e32(R300_VAP_VF_CNTL__PRIM_WALK_INDICES | (_vc<<16) | type \ - | R300_VAP_VF_CNTL__INDEX_SIZE_32bit); \ - } - -#define start_index16_packet(vertex_count, type) \ - {\ - int _vc, _n;\ - _vc=(vertex_count); \ - _n=(vertex_count+1)>>1; \ - start_packet3(RADEON_CP_PACKET3_3D_DRAW_INDX_2, _n); \ - e32(R300_VAP_VF_CNTL__PRIM_WALK_INDICES | (_vc<<16) | type); \ - } - -/* Interestingly enough this ones needs the call to setup_AOS, even thought - some of the data so setup is not needed and some is not as arbitrary - as when used by DRAW_VBUF_2 or DRAW_INDX_2 */ -#define start_immediate_packet(vertex_count, type, vertex_size) \ - {\ - int _vc; \ - _vc=(vertex_count); \ - start_packet3(RADEON_CP_PACKET3_3D_DRAW_IMMD_2, _vc*(vertex_size)); \ - e32(R300_VAP_VF_CNTL__PRIM_WALK_VERTEX_EMBEDDED | (_vc<<16) | type); \ - } - -#endif |