diff options
Diffstat (limited to 'nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v')
27 files changed, 0 insertions, 7877 deletions
diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/Makefile b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/Makefile deleted file mode 100644 index 9bd797315..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/Makefile +++ /dev/null @@ -1,36 +0,0 @@ -# src/mesa/drivers/dri/s3v/Makefile - -TOP = ../../../../.. -include $(TOP)/configs/current - -LIBNAME = s3v_dri.so - -# Doesn't exist yet. -#MINIGLX_SOURCES = server/savage_dri.c - -DRIVER_SOURCES = \ - s3v_context.c \ - s3v_dd.c \ - s3v_inithw.c \ - s3v_lock.c \ - s3v_render.c \ - s3v_screen.c \ - s3v_span.c \ - s3v_state.c \ - s3v_tex.c \ - s3v_texmem.c \ - s3v_texstate.c \ - s3v_tris.c \ - s3v_vb.c \ - s3v_xmesa.c - -C_SOURCES = \ - $(COMMON_SOURCES) \ - $(DRIVER_SOURCES) - -ASM_SOURCES = - - -include ../Makefile.template - -symlinks: diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_common.h b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_common.h deleted file mode 100644 index b66cdf1df..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_common.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -/* WARNING: If you change any of these defines, make sure to change - * the kernel include file as well (s3v_drm.h) - */ - -#ifndef _XF86DRI_S3V_H_ -#define _XF86DRI_S3V_H_ - -#ifndef _S3V_DEFINES_ -#define _S3V_DEFINES_ -#define S3V_USE_BATCH 1 - -/* #define S3V_BUF_4K 1 */ - -#ifdef S3V_BUF_4K -#define S3V_DMA_BUF_ORDER 12 -#define S3V_DMA_BUF_NR 256 -#else -#define S3V_DMA_BUF_ORDER 16 /* -much- better */ -#define S3V_DMA_BUF_NR 16 -#endif -/* on s3virge you can only choose between * - * 4k (2^12) and 64k (2^16) dma bufs */ -#define S3V_DMA_BUF_SZ (1<<S3V_DMA_BUF_ORDER) - -#define S3V_NR_SAREA_CLIPRECTS 8 - -/* Each region is a minimum of 16k (64*64@4bpp) - * and there are at most 40 of them. - */ -#define S3V_NR_TEX_REGIONS 64 /* was 40 */ -#define S3V_LOG_TEX_GRANULARITY 16 /* was 4 */ -/* 40 * (2 ^ 4) = 640k, that's all we have for tex on 4mb gfx card */ -/* FIXME: will it work with card with less than 4mb? */ -/* FIXME: we should set this at run time */ - -#endif /* _S3V_DEFINES */ - -/* - * WARNING: If you change any of these defines, make sure to change - * the kernel include file as well (gamma_drm.h) - */ - -/* Driver specific DRM command indices - * NOTE: these are not OS specific, but they are driver specific - */ -#define DRM_S3V_INIT_DMA 0x00 -#define DRM_S3V_CLEANUP_DMA 0x01 - -typedef struct _drmS3VInit { - enum { - S3V_INIT_DMA = 0x01, - S3V_CLEANUP_DMA = 0x02 - } func; - - unsigned int pcimode; /* bool: 1=pci 0=agp */ - - unsigned int mmio_offset; - unsigned int buffers_offset; - unsigned int sarea_priv_offset; - - unsigned int front_offset; - unsigned int front_width; - unsigned int front_height; - unsigned int front_pitch; - - unsigned int back_offset; - unsigned int back_width; - unsigned int back_height; - unsigned int back_pitch; - - unsigned int depth_offset; - unsigned int depth_width; - unsigned int depth_height; - unsigned int depth_pitch; - - unsigned int texture_offset; -} drmS3VInit; - -#endif diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_context.c b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_context.c deleted file mode 100644 index 7b0aa0dae..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_context.c +++ /dev/null @@ -1,258 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#include "s3v_context.h" - -#include "swrast/swrast.h" -#include "swrast_setup/swrast_setup.h" -#include "array_cache/acache.h" - -#include "tnl/tnl.h" -#include "tnl/t_pipeline.h" - -#include "context.h" -#include "simple_list.h" -#include "matrix.h" -#include "extensions.h" -#if defined(USE_X86_ASM) -#include "x86/common_x86_asm.h" -#endif -#include "simple_list.h" -#include "mm.h" - -#include "drivers/common/driverfuncs.h" -#include "s3v_vb.h" -#include "s3v_tris.h" - -#if 0 -extern const struct tnl_pipeline_stage _s3v_render_stage; - -static const struct tnl_pipeline_stage *s3v_pipeline[] = { - &_tnl_vertex_transform_stage, - &_tnl_normal_transform_stage, - &_tnl_lighting_stage, - &_tnl_fog_coordinate_stage, - &_tnl_texgen_stage, - &_tnl_texture_transform_stage, - /* REMOVE: point attenuation stage */ -#if 1 - &_s3v_render_stage, /* ADD: unclipped rastersetup-to-dma */ -#endif - &_tnl_render_stage, - 0, -}; -#endif - -GLboolean s3vCreateContext(const __GLcontextModes *glVisual, - __DRIcontextPrivate *driContextPriv, - void *sharedContextPrivate) -{ - GLcontext *ctx, *shareCtx; - __DRIscreenPrivate *sPriv = driContextPriv->driScreenPriv; - s3vContextPtr vmesa; - s3vScreenPtr s3vScrn; - S3VSAREAPtr saPriv=(S3VSAREAPtr)(((char*)sPriv->pSAREA) + - sizeof(drm_sarea_t)); - struct dd_function_table functions; - - DEBUG_WHERE(("*** s3vCreateContext ***\n")); - - vmesa = (s3vContextPtr) CALLOC( sizeof(*vmesa) ); - if ( !vmesa ) return GL_FALSE; - - /* Allocate the Mesa context */ - if (sharedContextPrivate) - shareCtx = ((s3vContextPtr) sharedContextPrivate)->glCtx; - else - shareCtx = NULL; - - _mesa_init_driver_functions(&functions); - - vmesa->glCtx = _mesa_create_context(glVisual, shareCtx, &functions, - (void *)vmesa); - if (!vmesa->glCtx) { - FREE(vmesa); - return GL_FALSE; - } - - vmesa->driContext = driContextPriv; - vmesa->driScreen = sPriv; - vmesa->driDrawable = NULL; /* Set by XMesaMakeCurrent */ - - vmesa->hHWContext = driContextPriv->hHWContext; - vmesa->driHwLock = (drmLock *)&sPriv->pSAREA->lock; - vmesa->driFd = sPriv->fd; - vmesa->sarea = saPriv; - - s3vScrn = vmesa->s3vScreen = (s3vScreenPtr)(sPriv->private); - - ctx = vmesa->glCtx; - - ctx->Const.MaxTextureLevels = 11; /* it is (11-1) -> 1024 * 1024 FIXME */ - - ctx->Const.MaxTextureUnits = 1; /* FIXME: or 2 ? */ - - /* No wide points. - */ - ctx->Const.MinPointSize = 1.0; - ctx->Const.MinPointSizeAA = 1.0; - ctx->Const.MaxPointSize = 1.0; - ctx->Const.MaxPointSizeAA = 1.0; - - /* No wide lines. - */ - ctx->Const.MinLineWidth = 1.0; - ctx->Const.MinLineWidthAA = 1.0; - ctx->Const.MaxLineWidth = 1.0; - ctx->Const.MaxLineWidthAA = 1.0; - ctx->Const.LineWidthGranularity = 1.0; - - vmesa->texHeap = mmInit( 0, vmesa->s3vScreen->textureSize ); - DEBUG(("vmesa->s3vScreen->textureSize = 0x%x\n", - vmesa->s3vScreen->textureSize)); - - /* NOTE */ - /* mmInit(offset, size); */ - - /* allocates a structure like this: - - struct mem_block_t { - struct mem_block_t *next; - struct mem_block_t *heap; - int ofs,size; - int align; - int free:1; - int reserved:1; - }; - - */ - - make_empty_list(&vmesa->TexObjList); - make_empty_list(&vmesa->SwappedOut); - - vmesa->CurrentTexObj[0] = 0; - vmesa->CurrentTexObj[1] = 0; /* FIXME */ - - vmesa->RenderIndex = ~0; - - /* Initialize the software rasterizer and helper modules. - */ - _swrast_CreateContext( ctx ); - _ac_CreateContext( ctx ); - _tnl_CreateContext( ctx ); - _swsetup_CreateContext( ctx ); - - /* Install the customized pipeline: - */ -#if 0 - _tnl_destroy_pipeline( ctx ); - _tnl_install_pipeline( ctx, s3v_pipeline ); -#endif - /* Configure swrast to match hardware characteristics: - */ -#if 0 - _swrast_allow_pixel_fog( ctx, GL_FALSE ); - _swrast_allow_vertex_fog( ctx, GL_TRUE ); -#endif - vmesa->_3d_mode = 0; - - /* 3D lines / gouraud tris */ - vmesa->CMD = ( AUTO_EXEC_ON | HW_CLIP_ON | DEST_COL_1555 - | FOG_OFF | ALPHA_OFF | Z_OFF | Z_UPDATE_OFF - | Z_LESS | TEX_WRAP_ON | TEX_MODULATE | LINEAR - | TEX_COL_ARGB1555 | CMD_3D ); - - vmesa->_alpha[0] = vmesa->_alpha[1] = ALPHA_OFF; - vmesa->alpha_cmd = vmesa->_alpha[0]; - vmesa->_tri[0] = DO_GOURAUD_TRI; - vmesa->_tri[1] = DO_TEX_LIT_TRI; - vmesa->prim_cmd = vmesa->_tri[0]; - - /* printf("first vmesa->CMD = 0x%x\n", vmesa->CMD); */ - - vmesa->TexOffset = vmesa->s3vScreen->texOffset; - - s3vInitVB( ctx ); - s3vInitExtensions( ctx ); - s3vInitDriverFuncs( ctx ); - s3vInitStateFuncs( ctx ); - s3vInitSpanFuncs( ctx ); - s3vInitTextureFuncs( ctx ); - s3vInitTriFuncs( ctx ); - s3vInitState( vmesa ); - - driContextPriv->driverPrivate = (void *)vmesa; - - /* HACK */ - vmesa->bufSize = S3V_DMA_BUF_SZ; - - DEBUG(("vmesa->bufSize = %i\n", vmesa->bufSize)); - DEBUG(("vmesa->bufCount = %i\n", vmesa->bufCount)); - - - /* dma init */ - DEBUG_BUFS(("GET_FIRST_DMA\n")); - - vmesa->_bufNum = 0; - - GET_FIRST_DMA(vmesa->driFd, vmesa->hHWContext, - 1, &(vmesa->bufIndex[0]), &(vmesa->bufSize), - &vmesa->_buf[0], &vmesa->bufCount, s3vScrn); - - GET_FIRST_DMA(vmesa->driFd, vmesa->hHWContext, - 1, &(vmesa->bufIndex[1]), &(vmesa->bufSize), - &vmesa->_buf[1], &vmesa->bufCount, s3vScrn); - - vmesa->buf = vmesa->_buf[vmesa->_bufNum]; - -/* - vmesa->CMD = (AUTO_EXEC_ON | HW_CLIP_ON | DEST_COL_1555 - | FOG_OFF | ALPHA_OFF | Z_OFF | Z_UPDATE_OFF - | DO_GOURAUD_TRI | CMD_3D); - - vmesa->TexOffset = vmesa->s3vScreen->texOffset; -*/ - -/* ... but we should support only 15 bit in virge (out of 8/15/24)... */ - - DEBUG(("glVisual->depthBits = %i\n", glVisual->depthBits)); - - switch (glVisual->depthBits) { - case 8: - break; - - case 15: - case 16: - vmesa->depth_scale = 1.0f / 0xffff; - break; - case 24: - vmesa->depth_scale = 1.0f / 0xffffff; - break; - default: - break; - } - - vmesa->cull_zero = 0.0f; - - vmesa->DepthSize = glVisual->depthBits; - vmesa->Flags = S3V_FRONT_BUFFER; - vmesa->Flags |= (glVisual->doubleBufferMode ? S3V_BACK_BUFFER : 0); - vmesa->Flags |= (vmesa->DepthSize > 0 ? S3V_DEPTH_BUFFER : 0); - - vmesa->EnabledFlags = S3V_FRONT_BUFFER; - vmesa->EnabledFlags |= (glVisual->doubleBufferMode ? S3V_BACK_BUFFER : 0); - - - if (vmesa->Flags & S3V_BACK_BUFFER) { - vmesa->readOffset = vmesa->drawOffset = vmesa->s3vScreen->backOffset; - } else { - vmesa->readOffset = vmesa->drawOffset = 0; - } - - s3vInitHW( vmesa ); - - driContextPriv->driverPrivate = (void *)vmesa; - - return GL_TRUE; -} diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_context.h b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_context.h deleted file mode 100644 index b94fee6a8..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_context.h +++ /dev/null @@ -1,444 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#ifndef _S3V_CONTEXT_H_ -#define _S3V_CONTEXT_H_ - -#include "dri_util.h" - -#include "s3v_dri.h" -#include "s3v_regs.h" -#include "s3v_macros.h" -#include "s3v_screen.h" -#include "colormac.h" -#include "macros.h" -#include "mtypes.h" -#include "drm.h" -#include "mm.h" -#include "drirenderbuffer.h" - -/* Flags for context */ -#define S3V_FRONT_BUFFER 0x00000001 -#define S3V_BACK_BUFFER 0x00000002 -#define S3V_DEPTH_BUFFER 0x00000004 - - /* FIXME: check */ -#define S3V_MAX_TEXTURE_SIZE 2048 - -/* These are the minimum requirements and should probably be increased */ -#define MAX_MODELVIEW_STACK 16 -#define MAX_PROJECTION_STACK 2 -#define MAX_TEXTURE_STACK 2 - -extern void s3vDDUpdateHWState(GLcontext *ctx); -extern s3vScreenPtr s3vCreateScreen(__DRIscreenPrivate *sPriv); -extern void s3vDestroyScreen(__DRIscreenPrivate *sPriv); -extern GLboolean s3vCreateContext(const __GLcontextModes *glVisual, - __DRIcontextPrivate *driContextPriv, - void *sharedContextPrivate); - -#define S3V_UPLOAD_ALL 0xffffffff -/* #define S3V_UPLOAD_CLIPRECTS 0x00000002 */ -#define S3V_UPLOAD_ALPHA 0x00000004 -#define S3V_UPLOAD_BLEND 0x00000008 -#define S3V_UPLOAD_DEPTH 0x00000010 -#define S3V_UPLOAD_VIEWPORT 0x00000020 -#define S3V_UPLOAD_SHADE 0x00000040 -#define S3V_UPLOAD_CLIP 0x00000080 -#define S3V_UPLOAD_MASKS 0x00000100 -#define S3V_UPLOAD_WINDOW 0x00000200 /* defunct */ -#define S3V_UPLOAD_GEOMETRY 0x00000400 -#define S3V_UPLOAD_POLYGON 0x00000800 -#define S3V_UPLOAD_DITHER 0x00001000 -#define S3V_UPLOAD_LOGICOP 0x00002000 -#define S3V_UPLOAD_FOG 0x00004000 -#define S3V_UPLOAD_LIGHT 0x00008000 -#define S3V_UPLOAD_CONTEXT 0x00010000 -#define S3V_UPLOAD_TEX0 0x00020000 -#define S3V_UPLOAD_STIPPLE 0x00040000 -#define S3V_UPLOAD_TRANSFORM 0x00080000 -#define S3V_UPLOAD_LINEMODE 0x00100000 -#define S3V_UPLOAD_POINTMODE 0x00200000 -#define S3V_UPLOAD_TRIMODE 0x00400000 - -#define S3V_NEW_CLIP 0x00000001 -#define S3V_NEW_WINDOW 0x00000002 -#define S3V_NEW_CONTEXT 0x00000004 -#define S3V_NEW_TEXTURE 0x00000008 /* defunct */ -#define S3V_NEW_ALPHA 0x00000010 -#define S3V_NEW_DEPTH 0x00000020 -#define S3V_NEW_MASKS 0x00000040 -#define S3V_NEW_POLYGON 0x00000080 -#define S3V_NEW_CULL 0x00000100 -#define S3V_NEW_LOGICOP 0x00000200 -#define S3V_NEW_FOG 0x00000400 -#define S3V_NEW_LIGHT 0x00000800 -#define S3V_NEW_STIPPLE 0x00001000 -#define S3V_NEW_ALL 0xffffffff - -#define S3V_FALLBACK_TRI 0x00000001 -#define S3V_FALLBACK_TEXTURE 0x00000002 - -struct s3v_context; -typedef struct s3v_context s3vContextRec; -typedef struct s3v_context *s3vContextPtr; -typedef struct s3v_texture_object_t *s3vTextureObjectPtr; - -#define VALID_S3V_TEXTURE_OBJECT(tobj) (tobj) - -#define S3V_TEX_MAXLEVELS 12 - -/* For shared texture space managment, these texture objects may also - * be used as proxies for regions of texture memory containing other - * client's textures. Such proxy textures (not to be confused with GL - * proxy textures) are subject to the same LRU aging we use for our - * own private textures, and thus we have a mechanism where we can - * fairly decide between kicking out our own textures and those of - * other clients. - * - * Non-local texture objects have a valid MemBlock to describe the - * region managed by the other client, and can be identified by - * 't->globj == 0' - */ -struct s3v_texture_object_t { - struct s3v_texture_object_t *next, *prev; - - GLuint age; - struct gl_texture_object *globj; - - int Pitch; - int Height; - int WidthLog2; - int texelBytes; - int totalSize; - int bound; - - PMemBlock MemBlock; - GLuint BufAddr; - - GLuint min_level; - GLuint max_level; - GLuint dirty_images; - - GLint firstLevel, lastLevel; /* upload tObj->Image[first .. lastLevel] */ - - struct { - const struct gl_texture_image *image; - int offset; /* into BufAddr */ - int height; - int internalFormat; - } image[S3V_TEX_MAXLEVELS]; - - GLuint TextureCMD; - - GLuint TextureColorMode; - GLuint TextureFilterMode; - GLuint TextureBorderColor; - GLuint TextureWrap; - GLuint TextureMipSize; - - GLuint TextureBaseAddr[S3V_TEX_MAXLEVELS]; - GLuint TextureFormat; - GLuint TextureReadMode; -}; - -#define S3V_NO_PALETTE 0x0 -#define S3V_USE_PALETTE 0x1 -#define S3V_UPDATE_PALETTE 0x2 -#define S3V_FALLBACK_PALETTE 0x4 - -void s3vUpdateTextureState( GLcontext *ctx ); - -void s3vDestroyTexObj( s3vContextPtr vmesa, s3vTextureObjectPtr t); -void s3vUploadTexImages( s3vContextPtr vmesa, s3vTextureObjectPtr t ); - -void s3vResetGlobalLRU( s3vContextPtr vmesa ); -void s3vTexturesGone( s3vContextPtr vmesa, - GLuint start, GLuint end, - GLuint in_use ); - -void s3vEmitHwState( s3vContextPtr vmesa ); -void s3vGetLock( s3vContextPtr vmesa, GLuint flags ); -void s3vInitExtensions( GLcontext *ctx ); -void s3vInitDriverFuncs( GLcontext *ctx ); -void s3vInitSpanFuncs( GLcontext *ctx ); -void s3vSetSpanFunctions(driRenderbuffer *rb, const GLvisual *vis); -void s3vInitState( s3vContextPtr vmesa ); -void s3vInitHW( s3vContextPtr vmesa ); -void s3vInitStateFuncs( GLcontext *ctx ); -void s3vInitTextureFuncs( GLcontext *ctx ); -void s3vInitTriFuncs( GLcontext *ctx ); - -void s3vUpdateWindow( GLcontext *ctx ); -void s3vUpdateViewportOffset( GLcontext *ctx ); - -void s3vPrintLocalLRU( s3vContextPtr vmesa ); -void s3vPrintGlobalLRU( s3vContextPtr vmesa ); - -extern void s3vFallback( s3vContextPtr vmesa, GLuint bit, GLboolean mode ); -#define FALLBACK( imesa, bit, mode ) s3vFallback( imesa, bit, mode ) - -/* Use the templated vertex formats. Only one of these is used in s3v. - */ -#define TAG(x) s3v##x -#include "tnl_dd/t_dd_vertex.h" -#undef TAG - -typedef void (*s3v_quad_func)( s3vContextPtr, - const s3vVertex *, - const s3vVertex *, - const s3vVertex *, - const s3vVertex * ); -typedef void (*s3v_tri_func)( s3vContextPtr, - const s3vVertex *, - const s3vVertex *, - const s3vVertex * ); -typedef void (*s3v_line_func)( s3vContextPtr, - const s3vVertex *, - const s3vVertex * ); -typedef void (*s3v_point_func)( s3vContextPtr, - const s3vVertex * ); - - -/* static void s3v_lines_emit(GLcontext *ctx, GLuint start, GLuint end); */ -typedef void (*emit_func)( GLcontext *, GLuint, GLuint); - -struct s3v_context { - GLcontext *glCtx; /* Mesa context */ - - __DRIcontextPrivate *driContext; - __DRIscreenPrivate *driScreen; - __DRIdrawablePrivate *driDrawable; - - GLuint new_gl_state; - GLuint new_state; - GLuint dirty; - - S3VSAREAPtr sarea; - - /* Temporaries for translating away float colors - */ - struct gl_client_array UbyteColor; - struct gl_client_array UbyteSecondaryColor; - - /* Mirrors of some DRI state - */ - - drm_context_t hHWContext; - drmLock *driHwLock; - int driFd; - - GLuint numClipRects; /* Cliprects for the draw buffer */ - drm_clip_rect_t *pClipRects; - - GLuint* buf; /* FIXME */ - GLuint* _buf[2]; - int _bufNum; - int bufIndex[2]; - int bufSize; - int bufCount; - - s3vScreenPtr s3vScreen; /* Screen private DRI data */ - - int drawOffset; - int readOffset; - - s3v_point_func draw_point; - s3v_line_func draw_line; - s3v_tri_func draw_tri; - s3v_quad_func draw_quad; - - GLuint Fallback; - GLuint RenderIndex; - GLuint SetupNewInputs; - GLuint SetupIndex; - - GLuint vertex_format; - GLuint vertex_size; - GLuint vertex_stride_shift; - char *verts; - - GLfloat hw_viewport[16]; - GLuint hw_primitive; - GLenum render_primitive; - - GLfloat depth_scale; - - s3vTextureObjectPtr CurrentTexObj[2]; - struct s3v_texture_object_t TexObjList; - struct s3v_texture_object_t SwappedOut; - GLenum TexEnvImageFmt[2]; - - memHeap_t *texHeap; - - int lastSwap; - int texAge; - int ctxAge; - int dirtyAge; - int lastStamp; - - /* max was here: don't touch */ - - unsigned int S3V_REG[S3V_REGS_NUM]; - - GLuint texMode; - GLuint alphaMode; - GLuint lightMode; - - GLuint SrcBase; - GLuint DestBase; - GLuint DestBlit; - GLuint ScissorLR; - GLuint ScissorTB; - GLuint ScissorWH; /* SubScissorWH */ /* RectWH */ - GLuint FrontStride; - GLuint BackStride; - GLuint SrcStride; - GLuint DestStride; - GLuint SrcXY; - GLuint DestXY; - - GLuint ClearColor; - GLuint Color; - GLuint DitherMode; - GLuint ClearDepth; - - GLuint TextureBorderColor; - GLuint TexOffset; - GLuint TexStride; - - GLuint CMD; - GLuint prim_cmd; - GLuint _tri[2]; /* 0 = gouraud; 1 = tex (lit or unlit) */ - GLuint alpha_cmd; /* actual alpha cmd */ - GLuint _alpha[2]; - GLuint _alpha_tex; /* tex alpha type */ - /* (3d_mode) 0 = 3d line/gourad tri; 1 = 3d tex tri */ - GLuint _3d_mode; - - GLfloat backface_sign; - GLfloat cull_zero; - - int restore_primitive; - -/* *** 2check *** */ - - GLuint FogMode; - GLuint AreaStippleMode; - GLuint LBReadFormat; - GLuint LBWriteFormat; - GLuint LineMode; - GLuint PointMode; - GLuint TriangleMode; - GLuint AntialiasMode; - GLfloat ViewportScaleX; - GLfloat ViewportScaleY; - GLfloat ViewportScaleZ; - GLfloat ViewportOffsetX; - GLfloat ViewportOffsetY; - GLfloat ViewportOffsetZ; - int MatrixMode; - int DepthMode; - int TransformMode; - int LBReadMode; - int FBReadMode; - int FBWindowBase; - int LBWindowBase; - int ColorDDAMode; - int GeometryMode; - int AlphaTestMode; - int AlphaBlendMode; - int AB_FBReadMode; - int AB_FBReadMode_Save; - int DeltaMode; - int ColorMaterialMode; - int FBHardwareWriteMask; - int MaterialMode; - int NormalizeMode; - int LightingMode; - int Light0Mode; - int Light1Mode; - int Light2Mode; - int Light3Mode; - int Light4Mode; - int Light5Mode; - int Light6Mode; - int Light7Mode; - int Light8Mode; - int Light9Mode; - int Light10Mode; - int Light11Mode; - int Light12Mode; - int Light13Mode; - int Light14Mode; - int Light15Mode; - int LogicalOpMode; - int ScissorMode; - int ScissorMaxXY; - int ScissorMinXY; - int Window; /* GID part probably should be in draw priv */ - int WindowOrigin; - int x, y, w, h; /* Probably should be in drawable priv */ - int FrameCount; /* Probably should be in drawable priv */ - int NotClipped; /* Probably should be in drawable priv */ - int WindowChanged; /* Probably should be in drawabl... */ - int Flags; - int EnabledFlags; - int DepthSize; - int Begin; - GLenum ErrorValue; - int Texture1DEnabled; - int Texture2DEnabled; - - float ModelView[16]; - float Proj[16]; - float ModelViewProj[16]; - float Texture[16]; - - float ModelViewStack[(MAX_MODELVIEW_STACK-1)*16]; - int ModelViewCount; - float ProjStack[(MAX_PROJECTION_STACK-1)*16]; - int ProjCount; - float TextureStack[(MAX_TEXTURE_STACK-1)*16]; - int TextureCount; -}; - -#define S3VIRGEPACKCOLOR555( r, g, b, a ) \ - ((((r) & 0xf8) << 7) | (((g) & 0xf8) << 2) | (((b) & 0xf8) >> 3) | \ - ((a) ? 0x8000 : 0)) - -#define S3VIRGEPACKCOLOR565( r, g, b ) \ - ((((r) & 0xf8) << 8) | (((g) & 0xfc) << 3) | (((b) & 0xf8) >> 3)) - -#define S3VIRGEPACKCOLOR888( r, g, b ) \ - (((r) << 16) | ((g) << 8) | (b)) - -#define S3VIRGEPACKCOLOR8888( r, g, b, a ) \ - (((a) << 24) | ((r) << 16) | ((g) << 8) | (b)) - -#define S3VIRGEPACKCOLOR4444( r, g, b, a ) \ - ((((a) & 0xf0) << 8) | (((r) & 0xf0) << 4) | ((g) & 0xf0) | ((b) >> 4)) - -static __inline GLuint s3vPackColor( GLuint cpp, - GLubyte r, GLubyte g, - GLubyte b, GLubyte a ) -{ - unsigned int ret; - DEBUG(("cpp = %i, r=0x%x, g=0x%x, b=0x%x, a=0x%x\n", cpp, r, g, b, a)); - - switch ( cpp ) { - case 2: - ret = S3VIRGEPACKCOLOR555( r, g, b, a ); - DEBUG(("ret = 0x%x\n", ret)); - return ret; - case 4: - return PACK_COLOR_8888( a, r, g, b ); - default: - return 0; - } -} - -#define S3V_CONTEXT(ctx) ((s3vContextPtr)(ctx->DriverCtx)) - -#endif /* _S3V_CONTEXT_H_ */ diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_dd.c b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_dd.c deleted file mode 100644 index 2c8e230f3..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_dd.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#include "s3v_context.h" -#include "s3v_vb.h" -#include "s3v_lock.h" -#if defined(USE_X86_ASM) -#include "x86/common_x86_asm.h" -#endif - -#include "context.h" -#include "framebuffer.h" -#include "swrast/swrast.h" - -#define S3V_DATE "20020207" - - -/* Return the width and height of the current color buffer. - */ -static void s3vDDGetBufferSize( GLframebuffer *buffer, - GLuint *width, GLuint *height ) -{ - GET_CURRENT_CONTEXT(ctx); - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - -/* S3VHW_LOCK( vmesa ); */ - *width = vmesa->driDrawable->w; - *height = vmesa->driDrawable->h; -/* S3VHW_UNLOCK( vmesa ); */ -} - - -/* Return various strings for glGetString(). - */ -static const GLubyte *s3vDDGetString( GLcontext *ctx, GLenum name ) -{ - static char buffer[128]; - - switch ( name ) { - case GL_VENDOR: - return (GLubyte *)"Max Lingua (ladybug)"; - - case GL_RENDERER: - sprintf( buffer, "Mesa DRI S3 Virge " S3V_DATE ); - - /* Append any CPU-specific information. - */ -#ifdef USE_X86_ASM - if ( _mesa_x86_cpu_features ) { - strncat( buffer, " x86", 4 ); - -} -#ifdef USE_MMX_ASM - if ( cpu_has_mmx ) { - strncat( buffer, "/MMX", 4 ); - } -#endif -#ifdef USE_3DNOW_ASM - if ( cpu_has_3dnow ) { - strncat( buffer, "/3DNow!", 7 ); - } -#endif -#ifdef USE_SSE_ASM - if ( cpu_has_xmm ) { - strncat( buffer, "/SSE", 4 ); - } -#endif -#endif - return (GLubyte *)buffer; - - default: - return NULL; - } -} - -/* Enable the extensions supported by this driver. - */ -void s3vInitExtensions( GLcontext *ctx ) -{ - /* None... */ -} - -/* Initialize the driver's misc functions. - */ -void s3vInitDriverFuncs( GLcontext *ctx ) -{ - ctx->Driver.GetBufferSize = s3vDDGetBufferSize; - ctx->Driver.GetString = s3vDDGetString; - - ctx->Driver.Error = NULL; - - /* Pixel path fallbacks - */ - ctx->Driver.Accum = _swrast_Accum; - ctx->Driver.Bitmap = _swrast_Bitmap; - ctx->Driver.CopyPixels = _swrast_CopyPixels; - ctx->Driver.DrawPixels = _swrast_DrawPixels; - ctx->Driver.ReadPixels = _swrast_ReadPixels; - ctx->Driver.ResizeBuffers = _mesa_resize_framebuffer; - - /* Swrast hooks for imaging extensions: - */ - ctx->Driver.CopyColorTable = _swrast_CopyColorTable; - ctx->Driver.CopyColorSubTable = _swrast_CopyColorSubTable; - ctx->Driver.CopyConvolutionFilter1D = _swrast_CopyConvolutionFilter1D; - ctx->Driver.CopyConvolutionFilter2D = _swrast_CopyConvolutionFilter2D; -} diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_dri.h b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_dri.h deleted file mode 100644 index 339c579f7..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_dri.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#ifndef _S3V_DRI -#define _S3V_DRI - -#include "s3v_common.h" - -#define S3V_MAX_DRAWABLES (S3V_DMA_BUF_NR/2) /* 32 */ /* 256 */ /* FIXME */ - -typedef struct -{ - int deviceID; - int width; - int height; - int mem; - int cpp; - int bitsPerPixel; - - int fbOffset; - int fbStride; - - int logTextureGranularity; - int textureOffset; - - drm_handle_t regs; - drmSize regsSize; - - unsigned int sarea_priv_offset; -/* - drmAddress regsMap; - - drmSize textureSize; - drm_handle_t textures; -*/ - -#if 0 - drm_handle_t agp_buffers; - drmSize agp_buf_size; -#endif - -/* - drmBufMapPtr drmBufs; - int irq; - unsigned int sarea_priv_offset; -*/ - -/* FIXME: cleanup ! */ - - drmSize registerSize; /* == S3V_MMIO_REGSIZE */ - drm_handle_t registerHandle; - - drmSize pciSize; - drm_handle_t pciMemHandle; - - drmSize frontSize; /* == videoRambytes */ -/* drm_handle_t frontHandle; */ - unsigned long frontOffset; /* == fbOffset */ - int frontPitch; -/* unsigned char *front; */ - - unsigned int bufferSize; /* size of depth/back buffer */ - - drmSize backSize; -/* drm_handle_t backHandle; */ - unsigned long backOffset; - int backPitch; -/* unsigned char *back; */ - - drmSize depthSize; -/* drm_handle_t depthHandle; */ - unsigned long depthOffset; - int depthPitch; -/* unsigned char *depth; */ - - drmSize texSize; -/* drm_handle_t texHandle; */ - unsigned long texOffset; - int texPitch; -/* unsigned char *tex; */ - - drmSize dmaBufSize; /* Size of buffers (in bytes) */ - drm_handle_t dmaBufHandle; /* Handle from drmAddMap */ - unsigned long dmaBufOffset; /* Offset/Start */ - int dmaBufPitch; /* Pitch */ - unsigned char *dmaBuf; /* Map */ - int bufNumBufs; /* Number of buffers */ - drmBufMapPtr buffers; /* Buffer map */ - -} S3VDRIRec, *S3VDRIPtr; - -/* WARNING: Do not change the SAREA structure without changing the kernel - * as well */ - -typedef struct { - unsigned char next, prev; /* indices to form a circular LRU */ - unsigned char in_use; /* owned by a client, or free? */ - int age; /* tracked by clients to update local LRU's */ -} S3VTexRegionRec, *S3VTexRegionPtr; - -typedef struct { - unsigned int nbox; - drm_clip_rect_t boxes[S3V_NR_SAREA_CLIPRECTS]; - - /* Maintain an LRU of contiguous regions of texture space. If - * you think you own a region of texture memory, and it has an - * age different to the one you set, then you are mistaken and - * it has been stolen by another client. If global texAge - * hasn't changed, there is no need to walk the list. - * - * These regions can be used as a proxy for the fine-grained - * texture information of other clients - by maintaining them - * in the same lru which is used to age their own textures, - * clients have an approximate lru for the whole of global - * texture space, and can make informed decisions as to which - * areas to kick out. There is no need to choose whether to - * kick out your own texture or someone else's - simply eject - * them all in LRU order. - */ - S3VTexRegionRec texList[S3V_NR_TEX_REGIONS+1]; /* Last elt is sentinal */ - - int texAge; /* last time texture was uploaded */ - - int last_enqueue; /* last time a buffer was enqueued */ - int last_dispatch; /* age of the most recently dispatched buffer */ - int last_quiescent; /* */ - - int ctxOwner; /* last context to upload state */ -} S3VSAREARec, *S3VSAREAPtr; - -typedef struct { - /* Nothing here yet */ - int dummy; -} S3VConfigPrivRec, *S3VConfigPrivPtr; - -typedef struct { - /* Nothing here yet */ - int dummy; -} S3VDRIContextRec, *S3VDRIContextPtr; - - -#endif diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_inithw.c b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_inithw.c deleted file mode 100644 index bdc9effb7..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_inithw.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#include <sys/ioctl.h> - -#include "s3v_context.h" - -void s3vInitHW( s3vContextPtr vmesa ) -{ - int i; - static short _reset = 1; - - DEBUG(("vmesa->driDrawable = %p\n", vmesa->driDrawable)); - DEBUG(("stride = %i\n", - vmesa->driScreen->fbWidth*vmesa->s3vScreen->cpp)); - DEBUG(("frontOffset = 0x%x\n", vmesa->s3vScreen->frontOffset)); - DEBUG(("backOffset = 0x%x\n", vmesa->s3vScreen->backOffset)); - DEBUG(("depthOffset = 0x%x\n", vmesa->s3vScreen->depthOffset)); - DEBUG(("textureOffset = 0x%x\n", vmesa->s3vScreen->texOffset)); - -/* if (_reset) { */ -/* ioctl(vmesa->driFd, 0x4a); */ - ioctl(vmesa->driFd, 0x41); /* reset */ - _reset = 0; -/* ioctl(vmesa->driFd, 0x4c); */ -/* } */ - - /* FIXME */ - switch (vmesa->s3vScreen->cpp) { - case 2: - break; - case 4: - break; - } - - /* FIXME for stencil, gid, etc */ - switch (vmesa->DepthSize) { - case 15: - case 16: - break; - case 24: - break; - case 32: - break; - } - - vmesa->FogMode = 1; - vmesa->ClearDepth = 0xffff; - vmesa->x = 0; - vmesa->y = 0; - vmesa->w = 0; - vmesa->h = 0; - vmesa->FrameCount = 0; - vmesa->MatrixMode = GL_MODELVIEW; - vmesa->ModelViewCount = 0; - vmesa->ProjCount = 0; - vmesa->TextureCount = 0; - - - /* FIXME: do we need the following? */ - - for (i = 0; i < 16; i++) - if (i % 5 == 0) - vmesa->ModelView[i] = - vmesa->Proj[i] = - vmesa->ModelViewProj[i] = - vmesa->Texture[i] = 1.0; - else - vmesa->ModelView[i] = - vmesa->Proj[i] = - vmesa->ModelViewProj[i] = - vmesa->Texture[i] = 0.0; - - vmesa->LBWindowBase = vmesa->driScreen->fbWidth * - (vmesa->driScreen->fbHeight - 1); - vmesa->FBWindowBase = vmesa->driScreen->fbWidth * - (vmesa->driScreen->fbHeight - 1); -} diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_lock.c b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_lock.c deleted file mode 100644 index 52bb87ece..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_lock.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#include "s3v_context.h" - -#if DEBUG_LOCKING -char *prevLockFile = NULL; -int prevLockLine = 0; -#endif - - -/* Update the hardware state. This is called if another context has - * grabbed the hardware lock, which includes the X server. This - * function also updates the driver's window state after the X server - * moves, resizes or restacks a window -- the change will be reflected - * in the drawable position and clip rects. Since the X server grabs - * the hardware lock when it changes the window state, this routine will - * automatically be called after such a change. - */ -void s3vGetLock( s3vContextPtr vmesa, GLuint flags ) -{ - __DRIdrawablePrivate *dPriv = vmesa->driDrawable; -/* __DRIscreenPrivate *sPriv = vmesa->driScreen; */ - - printf("s3vGetLock <- ***\n"); - - drmGetLock( vmesa->driFd, vmesa->hHWContext, flags ); - - /* The window might have moved, so we might need to get new clip - * rects. - * - * NOTE: This releases and regrabs the hw lock to allow the X server - * to respond to the DRI protocol request for new drawable info. - * Since the hardware state depends on having the latest drawable - * clip rects, all state checking must be done _after_ this call. - */ - /* DRI_VALIDATE_DRAWABLE_INFO( vmesa->display, sPriv, dPriv ); */ - - if ( vmesa->lastStamp != dPriv->lastStamp ) { - vmesa->lastStamp = dPriv->lastStamp; - vmesa->new_state |= S3V_NEW_WINDOW | S3V_NEW_CLIP; - } - - vmesa->numClipRects = dPriv->numClipRects; - vmesa->pClipRects = dPriv->pClipRects; - -#if 0 - vmesa->dirty = ~0; - - if ( sarea->ctxOwner != vmesa->hHWContext ) { - sarea->ctxOwner = vmesa->hHWContext; - vmesa->dirty = S3V_UPLOAD_ALL; - } - - for ( i = 0 ; i < vmesa->lastTexHeap ; i++ ) { - if ( sarea->texAge[i] != vmesa->lastTexAge[i] ) { - s3vAgeTextures( vmesa, i ); - } - } -#endif -} diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_lock.h b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_lock.h deleted file mode 100644 index c39d24a38..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_lock.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#ifndef __S3V_LOCK_H__ -#define __S3V_LOCK_H__ - -#include <sys/ioctl.h> - -extern void s3vGetLock( s3vContextPtr vmesa, GLuint flags ); - -/* Turn DEBUG_LOCKING on to find locking conflicts. - */ -#define DEBUG_LOCKING 0 - -#if DEBUG_LOCKING -extern char *prevLockFile; -extern int prevLockLine; - -#define DEBUG_LOCK() \ - do { \ - prevLockFile = (__FILE__); \ - prevLockLine = (__LINE__); \ - } while (0) - -#define DEBUG_RESET() \ - do { \ - prevLockFile = 0; \ - prevLockLine = 0; \ - } while (0) - -#define DEBUG_CHECK_LOCK() \ - do { \ - if ( prevLockFile ) { \ - fprintf( stderr, \ - "LOCK SET!\n\tPrevious %s:%d\n\tCurrent: %s:%d\n", \ - prevLockFile, prevLockLine, __FILE__, __LINE__ ); \ - exit(1); \ - } \ - } while (0) - -#else - -#define DEBUG_LOCK() -#define DEBUG_RESET() -#define DEBUG_CHECK_LOCK() - -#endif - -/* - * !!! We may want to separate locks from locks with validation. This - * could be used to improve performance for those things commands that - * do not do any drawing !!! - */ - -/* Lock the hardware and validate our state. - */ -#define LOCK_HARDWARE( vmesa ) \ - do { \ - char __ret = 0; \ - DEBUG_CHECK_LOCK(); \ - DRM_CAS( vmesa->driHwLock, vmesa->hHWContext, \ - (DRM_LOCK_HELD | vmesa->hHWContext), __ret ); \ - if ( __ret ) \ - s3vGetLock( vmesa, 0 ); \ - DEBUG_LOCK(); \ - } while (0) - -/* Unlock the hardware. - */ -#define UNLOCK_HARDWARE( vmesa ) \ - do { \ - DRM_UNLOCK( vmesa->driFd, \ - vmesa->driHwLock, \ - vmesa->hHWContext ); \ - DEBUG_RESET(); \ - } while (0) - -#define S3VHW_LOCK( vmesa ) \ - DRM_UNLOCK(vmesa->driFd, vmesa->driHwLock, vmesa->hHWContext); \ - DRM_SPINLOCK(&vmesa->driScreen->pSAREA->drawable_lock, \ - vmesa->driScreen->drawLockID); \ - /* VALIDATE_DRAWABLE_INFO_NO_LOCK(vmesa); */ - -#define S3VHW_UNLOCK( vmesa ) \ - DRM_SPINUNLOCK(&vmesa->driScreen->pSAREA->drawable_lock, \ - vmesa->driScreen->drawLockID); \ - /* VALIDATE_DRAWABLE_INFO_NO_LOCK_POST(vmesa); */ - -#define S3V_SIMPLE_LOCK( vmesa ) \ - ioctl(vmesa->driFd, 0x4a) - -#define S3V_SIMPLE_FLUSH_LOCK( vmesa ) \ - ioctl(vmesa->driFd, 0x4b) - -#define S3V_SIMPLE_UNLOCK( vmesa ) \ - ioctl(vmesa->driFd, 0x4c) - -#endif /* __S3V_LOCK_H__ */ diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_macros.h b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_macros.h deleted file mode 100644 index 3bc871b7e..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_macros.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#ifndef _S3V_MACROS_H_ -#define _S3V_MACROS_H_ - -/**************/ -/* DRI macros */ -/**************/ - -#define GENERIC_DEBUG 0 -#define FLOW_DEBUG 0 -#define DMABUFS_DEBUG 0 - -/* Note: The argument to DEBUG*() _must_ be enclosed in parenthesis */ - -#if (GENERIC_DEBUG || FLOW_DEBUG || DMABUFS_DEBUG) -#include <stdio.h> -#endif - -#if GENERIC_DEBUG -#define DEBUG(str) printf str -#else -#define DEBUG(str) -#endif - -#if FLOW_DEBUG -#define DEBUG_WHERE(str) printf str -#else -#define DEBUG_WHERE(str) -#endif - -#if DMABUFS_DEBUG -#define DEBUG_BUFS(str) printf str -#else -#define DEBUG_BUFS(str) -#endif - - -#if 0 -#define S3V_DMA_SEND_FLAGS DRM_DMA_PRIORITY -#define S3V_DMA_SEND_FLAGS DRM_DMA_BLOCK -#else -#define S3V_DMA_SEND_FLAGS 0 -#endif - -#if 0 -#define S3V_DMA_GET_FLAGS \ - (DRM_DMA_SMALLER_OK | DRM_DMA_LARGER_OK | DRM_DMA_WAIT) -#else -#define S3V_DMA_GET_FLAGS DRM_DMA_WAIT -#endif - - -#define DMAOUT_CHECK(reg,len) \ -do { \ - DEBUG(("DMAOUT_CHECK: reg = 0x%x\n", S3V_##reg##_REG)); \ - DEBUG_BUFS(("DMAOUT_CHECK (was): ")); \ - DEBUG_BUFS(("vmesa->bufCount=%i of vmesa->bufSize=%i\n", \ - vmesa->bufCount, vmesa->bufSize)); \ - /* FIXME: > or >= */ \ - if (vmesa->bufCount+(len+1) >= vmesa->bufSize) \ - DMAFLUSH(); \ -\ - vmesa->bufCount += (len+1); \ - DEBUG_BUFS(("DMAOUT_CHECK (is): vmesa->bufCount=%i len=%i, reg=%x\n", \ - vmesa->bufCount, len, S3V_##reg##_REG)); \ - DMAOUT( ((len & 0xffff) | ((S3V_##reg##_REG & 0xfffc) << 14)) ); \ -} while (0) - -#define DMAOUT(val) \ -do { \ - *(vmesa->buf++)=val; \ - DEBUG_BUFS(("DMAOUT: val=0x%x\n", (unsigned int)val)); \ -} while(0) - -#define DMAFINISH() \ -do { \ - /* NOTE: it does nothing - it just prints some summary infos */ \ - DEBUG(("DMAFINISH: vmesa->bufCount=%i\n", vmesa->bufCount)); \ - DEBUG(("buf: index=%i; addr=%p\n", vmesa->bufIndex[vmesa->_bufNum], \ - vmesa->s3vScreen->bufs->list[vmesa->bufIndex[vmesa->_bufNum]].address)); \ -} while(0) - -#define DMAFLUSH() \ -do { \ - if (vmesa->bufCount) { \ - SEND_DMA(vmesa->driFd, vmesa->hHWContext, 1, \ - &vmesa->bufIndex[vmesa->_bufNum], &vmesa->bufCount); \ -/* - GET_DMA(vmesa->driFd, vmesa->hHWContext, 1, \ - &vmesa->bufIndex, &vmesa->bufSize); \ -*/ \ - vmesa->_bufNum = !(vmesa->_bufNum); \ - vmesa->buf = vmesa->_buf[vmesa->_bufNum]; \ -/* - vmesa->buf = \ - vmesa->s3vScreen->bufs->list[vmesa->bufIndex].address; \ -*/ \ - vmesa->bufCount = 0; \ - } \ -} while (0) - -#define CMDCHANGE() \ -do { \ - DMAOUT_CHECK(3DTRI_CMDSET, 1); /* FIXME: TRI/LINE */ \ - DMAOUT(vmesa->CMD); \ - DMAFINISH(); \ -} while (0) - -#ifdef DONT_SEND_DMA -#define GET_DMA(fd, hHWCtx, n, idx, size) -#define SEND_DMA(fd, hHWCtx,n, idx, cnt) -#else -#define GET_DMA(fd, hHWCtx, n, idx, size) \ -do { \ - drmDMAReq dma; \ - int retcode, i; \ -\ - DEBUG(("GET_DMA: ")); \ - DEBUG(("req_count=%i; req_list[#0]=%i; req_size[#0]=%i\n", \ - n, (idx)[n-1], (size)[n-1])); \ -\ - dma.context = (hHWCtx); \ - dma.send_count = 0; \ - dma.send_list = NULL; \ - dma.send_sizes = NULL; \ - dma.flags = S3V_DMA_GET_FLAGS; \ - dma.request_count = (n); \ - dma.request_size = S3V_DMA_BUF_SZ; \ - dma.request_list = (idx); \ - dma.request_sizes = (size); \ -\ - do { \ - if ((retcode = drmDMA((fd), &dma))) { \ - DEBUG_BUFS(("drmDMA (get) returned %d\n", retcode)); \ - } \ -} while (!(dma).granted_count); \ -\ - for (i = 0; i < (n); i++) { \ - DEBUG(("Got buffer %i (index #%i)\n", (idx)[i], i)); \ - DEBUG(("of %i bytes (%i words) size\n", \ - (size)[i], (size)[i] >>2)); \ - /* Convert from bytes to words */ \ - (size)[i] >>= 2; \ - } \ -} while (0) - -#define SEND_DMA(fd, hHWCtx, n, idx, cnt) \ -do { \ - drmDMAReq dma; \ - int retcode, i; \ -\ - DEBUG(("SEND_DMA: ")); \ - DEBUG(("send_count=%i; send_list[#0]=%i; send_sizes[#0]=%i\n", \ - n, (idx)[n-1], (cnt)[n-1])); \ -\ - for (i = 0; i < (n); i++) { \ - /* Convert from words to bytes */ \ - (cnt)[i] <<= 2; \ - } \ -\ - dma.context = (hHWCtx); \ - dma.send_count = (n); \ - dma.send_list = (idx); \ - dma.send_sizes = (cnt); \ - dma.flags = S3V_DMA_SEND_FLAGS; \ - dma.request_count = 0; \ - dma.request_size = 0; \ - dma.request_list = NULL; \ - dma.request_sizes = NULL; \ -\ - if ((retcode = drmDMA((fd), &dma))) { \ - DEBUG_BUFS(("drmDMA (send) returned %d\n", retcode)); \ - } \ -\ - for (i = 0; i < (n); i++) { \ - DEBUG(("Sent buffer %i (index #%i)\n", (idx)[i], i)); \ - DEBUG(("of %i bytes (%i words) size\n", \ - (cnt)[i], (cnt)[i] >>2)); \ - (cnt)[i] = 0; \ - } \ -} while (0) -#endif /* DONT_SEND_DMA */ - -#define GET_FIRST_DMA(fd, hHWCtx, n, idx, size, buf, cnt, vPriv) \ -do { \ - int i; \ - DEBUG_BUFS(("GET_FIRST_DMA\n")); \ - DEBUG_BUFS(("n=%i idx=%i size=%i\n", n, *idx, *size)); \ - DEBUG_BUFS(("going to GET_DMA\n")); \ - GET_DMA(fd, hHWCtx, n, idx, size); \ - DEBUG_BUFS(("coming from GET_DMA\n")); \ - DEBUG_BUFS(("n=%i idx=%i size=%i\n", n, (idx)[0], (size)[0])); \ - for (i = 0; i < (n); i++) { \ - DEBUG_BUFS(("buf #%i @%p\n", \ - i, (vPriv)->bufs->list[(idx)[i]].address)); \ - (buf)[i] = (vPriv)->bufs->list[(idx)[i]].address; \ - (cnt)[i] = 0; \ - } \ - DEBUG(("GOING HOME\n")); \ -} while (0) - -/**************************/ -/* generic, global macros */ -/**************************/ - -#define CALC_LOG2(l2,s) \ -do { \ - int __s = s; \ - l2 = 0; \ - while (__s > 1) { ++l2; __s >>= 1; } \ -} while (0) - -#define PrimType_Null 0x00000000 -#define PrimType_Points 0x10000000 -#define PrimType_Lines 0x20000000 -#define PrimType_LineLoop 0x30000000 -#define PrimType_LineStrip 0x40000000 -#define PrimType_Triangles 0x50000000 -#define PrimType_TriangleStrip 0x60000000 -#define PrimType_TriangleFan 0x70000000 -#define PrimType_Quads 0x80000000 -#define PrimType_QuadStrip 0x90000000 -#define PrimType_Polygon 0xa0000000 -#define PrimType_Mask 0xf0000000 - -#endif /* _S3V_MACROS_H_ */ diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_regs.h b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_regs.h deleted file mode 100644 index 26a7c54af..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_regs.h +++ /dev/null @@ -1,367 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#ifndef _S3V_REG_H -#define _S3V_REG_H - -#define S3V_REGS_NUM 256 - -/************ - * DMA REGS * - ************/ - -#define S3V_DMA_ID 0 -#define S3V_DMA_REG 0x8590 -#define S3V_DMA_WRITEP_ID 1 -#define S3V_DMA_WRITEP_REG 0x8594 -#define S3V_DMA_READP_ID 2 -#define S3V_DMA_READP_REG 0x8598 -#define S3V_DMA_ENABLE_ID 3 -#define S3V_DMA_ENABLE_REG 0x859C -#define S3V_DMA_UPDATE_ID 4 -#define S3V_DMA_UPDATE_REG 0x10000 - -/*************** - * STATUS REGS * - ***************/ - -#define S3V_STAT_ID 10 -#define S3V_STAT_REG 0x8504 -#define S3V_STAT_VSYNC_ID 11 -#define S3V_STAT_VSYNC_REG 0x8505 -#define S3V_STAT_3D_DONE_ID 12 -#define S3V_STAT_3D_DONE_REG 0x8506 -#define S3V_STAT_FIFO_OVER_ID 13 -#define S3V_STAT_FIFO_OVER_REG 0x8508 -#define S3V_STAT_FIFO_EMPTY_ID 14 -#define S3V_STAT_FIFO_EMPTY_REG 0x850C -#define S3V_STAT_HDMA_DONE_ID 15 -#define S3V_STAT_HDMA_DONE_REG 0x8514 -#define S3V_STAT_CDMA_DONE_ID 16 -#define S3V_STAT_CDMA_DONE_REG 0x8524 -#define S3V_STAT_3D_FIFO_EMPTY_ID 17 -#define S3V_STAT_3D_FIFO_EMPTY_REG 0x8544 -#define S3V_STAT_LPB_ID 18 -#define S3V_STAT_LPB_REG 0x8584 -#define S3V_STAT_3D_BUSY_ID 19 -#define S3V_STAT_3D_BUSY_REG 0x8704 - -/*********** - * 2D REGS * - ***********/ - -#define S3V_BITBLT_ID 30 -#define S3V_BITBLT_REG 0xA400 -#define S3V_BITBLT_SRC_BASE_ID 31 -#define S3V_BITBLT_SRC_BASE_REG 0xA4D4 -#define S3V_BITBLT_DEST_BASE_ID 32 -#define S3V_BITBLT_DEST_BASE_REG 0xA4D8 -#define S3V_BITBLT_CLIP_L_R_ID 33 -#define S3V_BITBLT_CLIP_L_R_REG 0xA4DC -#define S3V_BITBLT_CLIP_T_B_ID 34 -#define S3V_BITBLT_CLIP_T_B_REG 0xA4E0 -#define S3V_BITBLT_DEST_SRC_STRIDE_ID 35 -#define S3V_BITBLT_DEST_SRC_STRIDE_REG 0xA4E4 -#define S3V_BITBLT_MONO_PAT0_ID 36 -#define S3V_BITBLT_MONO_PAT0_REG 0xA4E8 -#define S3V_BITBLT_MONO_PAT1_ID 37 -#define S3V_BITBLT_MONO_PAT1_REG 0xA4EC -#define S3V_BITBLT_PAT_BG_COLOR_ID 38 -#define S3V_BITBLT_PAT_BG_COLOR_REG 0xA4F0 -#define S3V_BITBLT_PAT_FG_COLOR_ID 39 -#define S3V_BITBLT_PAT_FG_COLOR_REG 0xA4F4 -#define S3V_BITBLT_CMDSET_ID 40 -#define S3V_BITBLT_CMDSET_REG 0xA500 -#define S3V_BITBLT_WIDTH_HEIGHT_ID 41 -#define S3V_BITBLT_WIDTH_HEIGHT_REG 0xA504 -#define S3V_BITBLT_SRC_X_Y_ID 42 -#define S3V_BITBLT_SRC_X_Y_REG 0xA508 -#define S3V_BITBLT_DEST_X_Y_ID 43 -#define S3V_BITBLT_DEST_X_Y_REG 0xA50C -#define S3V_2DLINE_ID 44 -#define S3V_2DLINE_REG 0xA800 -#define S3V_2DPOLY_ID 45 -#define S3V_2DPOLY_REG 0xAC00 - -/*************** - * 3DLINE REGS * - ***************/ -/* base regs */ -#define S3V_3DLINE_ID 50 -#define S3V_3DLINE_REG 0xB000 -#define S3V_3DLINE_Z_BASE_ID 51 -#define S3V_3DLINE_Z_BASE_REG 0xB0D4 -#define S3V_3DLINE_SRC_BASE_ID 52 /* it is the same reg */ -#define S3V_3DLINE_SRC_BASE_REG 0xB0D4 -#define S3V_3DLINE_DEST_BASE_ID 53 -#define S3V_3DLINE_DEST_BASE_REG 0xB0D8 -#define S3V_3DLINE_CLIP_L_R_ID 54 -#define S3V_3DLINE_CLIP_L_R_REG 0xB0DC -#define S3V_3DLINE_CLIP_T_B_ID 55 -#define S3V_3DLINE_CLIP_T_B_REG 0xB0E0 -#define S3V_3DLINE_DEST_SRC_STRIDE_ID 56 -#define S3V_3DLINE_DEST_SRC_STRIDE_REG 0xB0E4 -#define S3V_3DLINE_Z_STRIDE_ID 57 -#define S3V_3DLINE_Z_STRIDE_REG 0xB0E8 -#define S3V_3DLINE_TEX_BASE_ID 58 -#define S3V_3DLINE_TEX_BASE_REG 0xB0EC -#define S3V_3DLINE_TEX_B_COLOR_ID 59 -#define S3V_3DLINE_TEX_B_COLOR_REG 0xB0F0 -#define S3V_3DLINE_FOG_COLOR_ID 60 -#define S3V_3DLINE_FOG_COLOR_REG 0xB0F4 -#define S3V_3DLINE_COLOR0_ID 61 -#define S3V_3DLINE_COLOR0_REG 0xB0F8 -#define S3V_3DLINE_COLOR1_ID 62 -#define S3V_3DLINE_COLOR1_REG 0xB0FC -#define S3V_3DLINE_CMDSET_ID 63 -#define S3V_3DLINE_CMDSET_REG 0xB100 /* special */ -/* tex regs */ -/* FIXME: shouldn't it be a 1D tex for lines? */ -#define S3V_3DLINE_BASEV_ID 64 -#define S3V_3DLINE_BASEV_REG 0xB104 -#define S3V_3DLINE_BASEU_ID 65 -#define S3V_3DLINE_BASEU_REG 0xB108 -#define S3V_3DLINE_WXD_ID 66 -#define S3V_3DLINE_WXD_REG 0xB10C -#define S3V_3DLINE_WYD_ID 67 -#define S3V_3DLINE_WYD_REG 0xB110 -#define S3V_3DLINE_WSTART_ID 68 -#define S3V_3DLINE_WSTART_REG 0xB114 -#define S3V_3DLINE_DXD_ID 69 -#define S3V_3DLINE_DXD_REG 0xB118 -#define S3V_3DLINE_VXD_ID 70 -#define S3V_3DLINE_VXD_REG 0xB11C -#define S3V_3DLINE_UXD_ID 71 -#define S3V_3DLINE_UXD_REG 0xB120 -#define S3V_3DLINE_DYD_ID 72 -#define S3V_3DLINE_DYD_REG 0xB124 -#define S3V_3DLINE_VYD_ID 73 -#define S3V_3DLINE_VYD_REG 0xB128 -#define S3V_3DLINE_UYD_ID 74 -#define S3V_3DLINE_UYD_REG 0xB12C -#define S3V_3DLINE_DSTART_ID 75 -#define S3V_3DLINE_DSTART_REG 0xB130 -#define S3V_3DLINE_VSTART_ID 76 -#define S3V_3DLINE_VSTART_REG 0xB134 -#define S3V_3DLINE_USTART_ID 77 -#define S3V_3DLINE_USTART_REG 0xB138 -/* gourad regs */ -#define S3V_3DLINE_GBD_ID 78 -#define S3V_3DLINE_GBD_REG 0xB144 -#define S3V_3DLINE_ARD_ID 79 -#define S3V_3DLINE_ARD_REG 0xB148 -#define S3V_3DLINE_GS_BS_ID 80 -#define S3V_3DLINE_GS_BS_REG 0xB14C -#define S3V_3DLINE_AS_RS_ID 81 -#define S3V_3DLINE_AS_RS_REG 0xB150 -/* vertex regs */ -#define S3V_3DLINE_DZ_ID 82 -#define S3V_3DLINE_DZ_REG 0xB158 -#define S3V_3DLINE_ZSTART_ID 83 -#define S3V_3DLINE_ZSTART_REG 0xB15C -#define S3V_3DLINE_XEND0_END1_ID 84 -#define S3V_3DLINE_XEND0_END1_REG 0xB16C -#define S3V_3DLINE_DX_ID 85 -#define S3V_3DLINE_DX_REG 0xB170 -#define S3V_3DLINE_XSTART_ID 86 -#define S3V_3DLINE_XSTART_REG 0xB174 -#define S3V_3DLINE_YSTART_ID 87 -#define S3V_3DLINE_YSTART_REG 0xB178 -#define S3V_3DLINE_YCNT_ID 88 -#define S3V_3DLINE_YCNT_REG 0xB17C - -/************** - * 3DTRI REGS * - **************/ -/* base regs */ -#define S3V_3DTRI_ID 100 -#define S3V_3DTRI_REG 0xB400 -#define S3V_3DTRI_Z_BASE_ID 101 -#define S3V_3DTRI_Z_BASE_REG 0xB4D4 -#define S3V_3DTRI_SRC_BASE_ID 102 /* it is the same reg */ -#define S3V_3DTRI_SRC_BASE_REG 0xB4D4 -#define S3V_3DTRI_DEST_BASE_ID 103 -#define S3V_3DTRI_DEST_BASE_REG 0xB4D8 -#define S3V_3DTRI_CLIP_L_R_ID 104 -#define S3V_3DTRI_CLIP_L_R_REG 0xB4DC -#define S3V_3DTRI_CLIP_T_B_ID 105 -#define S3V_3DTRI_CLIP_T_B_REG 0xB4E0 -#define S3V_3DTRI_DEST_SRC_STRIDE_ID 106 -#define S3V_3DTRI_DEST_SRC_STRIDE_REG 0xB4E4 -#define S3V_3DTRI_Z_STRIDE_ID 107 -#define S3V_3DTRI_Z_STRIDE_REG 0xB4E8 -#define S3V_3DTRI_TEX_BASE_ID 108 -#define S3V_3DTRI_TEX_BASE_REG 0xB4EC -#define S3V_3DTRI_TEX_B_COLOR_ID 109 -#define S3V_3DTRI_TEX_B_COLOR_REG 0xB4F0 -#define S3V_3DTRI_FOG_COLOR_ID 110 -#define S3V_3DTRI_FOG_COLOR_REG 0xB4F4 -#define S3V_3DTRI_COLOR0_ID 111 -#define S3V_3DTRI_COLOR0_REG 0xB4F8 -#define S3V_3DTRI_COLOR1_ID 112 -#define S3V_3DTRI_COLOR1_REG 0xB4FC -#define S3V_3DTRI_CMDSET_ID 113 /* special */ -#define S3V_3DTRI_CMDSET_REG 0xB500 -/* tex regs */ -#define S3V_3DTRI_BASEV_ID 114 -#define S3V_3DTRI_BASEV_REG 0xB504 -#define S3V_3DTRI_BASEU_ID 115 -#define S3V_3DTRI_BASEU_REG 0xB508 -#define S3V_3DTRI_WXD_ID 116 -#define S3V_3DTRI_WXD_REG 0xB50C -#define S3V_3DTRI_WYD_ID 117 -#define S3V_3DTRI_WYD_REG 0xB510 -#define S3V_3DTRI_WSTART_ID 118 -#define S3V_3DTRI_WSTART_REG 0xB514 -#define S3V_3DTRI_DXD_ID 119 -#define S3V_3DTRI_DXD_REG 0xB518 -#define S3V_3DTRI_VXD_ID 120 -#define S3V_3DTRI_VXD_REG 0xB51C -#define S3V_3DTRI_UXD_ID 121 -#define S3V_3DTRI_UXD_REG 0xB520 -#define S3V_3DTRI_DYD_ID 122 -#define S3V_3DTRI_DYD_REG 0xB524 -#define S3V_3DTRI_VYD_ID 123 -#define S3V_3DTRI_VYD_REG 0xB528 -#define S3V_3DTRI_UYD_ID 124 -#define S3V_3DTRI_UYD_REG 0xB52C -#define S3V_3DTRI_DSTART_ID 125 -#define S3V_3DTRI_DSTART_REG 0xB530 -#define S3V_3DTRI_VSTART_ID 126 -#define S3V_3DTRI_VSTART_REG 0xB534 -#define S3V_3DTRI_USTART_ID 127 -#define S3V_3DTRI_USTART_REG 0xB538 -/* gourad regs */ -#define S3V_3DTRI_GBX_ID 128 -#define S3V_3DTRI_GBX_REG 0xB53C -#define S3V_3DTRI_ARX_ID 129 -#define S3V_3DTRI_ARX_REG 0xB540 -#define S3V_3DTRI_GBY_ID 130 -#define S3V_3DTRI_GBY_REG 0xB544 -#define S3V_3DTRI_ARY_ID 131 -#define S3V_3DTRI_ARY_REG 0xB548 -#define S3V_3DTRI_GS_BS_ID 132 -#define S3V_3DTRI_GS_BS_REG 0xB54C -#define S3V_3DTRI_AS_RS_ID 133 -#define S3V_3DTRI_AS_RS_REG 0xB550 -/* vertex regs */ -#define S3V_3DTRI_ZXD_ID 134 -#define S3V_3DTRI_ZXD_REG 0xB554 -#define S3V_3DTRI_ZYD_ID 135 -#define S3V_3DTRI_ZYD_REG 0xB558 -#define S3V_3DTRI_ZSTART_ID 136 -#define S3V_3DTRI_ZSTART_REG 0xB55C -#define S3V_3DTRI_TXDELTA12_ID 137 -#define S3V_3DTRI_TXDELTA12_REG 0xB560 -#define S3V_3DTRI_TXEND12_ID 138 -#define S3V_3DTRI_TXEND12_REG 0xB564 -#define S3V_3DTRI_TXDELTA01_ID 139 -#define S3V_3DTRI_TXDELTA01_REG 0xB568 -#define S3V_3DTRI_TXEND01_ID 140 -#define S3V_3DTRI_TXEND01_REG 0xB56C -#define S3V_3DTRI_TXDELTA02_ID 141 -#define S3V_3DTRI_TXDELTA02_REG 0xB570 -#define S3V_3DTRI_TXSTART02_ID 142 -#define S3V_3DTRI_TXSTART02_REG 0xB574 -#define S3V_3DTRI_TYS_ID 143 -#define S3V_3DTRI_TYS_REG 0xB578 -#define S3V_3DTRI_TY01_Y12_ID 144 -#define S3V_3DTRI_TY01_Y12_REG 0xB57C - -/* COMMANDS (to 0xB100 [lines] or 0xB500 [tris]) */ - -/* Auto execute */ -#define AUTO_EXEC_MASK 0x00000001 -#define AUTO_EXEC_OFF (0x0) -#define AUTO_EXEC_ON (0x1) -/* HW clipping */ -#define HW_CLIP_MASK 0x00000002 -#define HW_CLIP_OFF (0x0 << 1) -#define HW_CLIP_ON (0x1 << 1) -/* Destination color */ -#define DEST_COL_MASK 0x0000001c -#define DEST_COL_PAL (0x0 << 2) /* 8 bpp - palettized */ -#define DEST_COL_1555 (0x1 << 2) /* 16 bpp - ZRGB */ -#define DEST_COL_888 (0x2 << 2) /* 24 bpp - RGB */ -/* Texture color */ -#define TEX_COL_MASK 0x000000e0 -#define TEX_COL_ARGB8888 (0x0 << 5) /* 32 bpp - ARGB */ -#define TEX_COL_ARGB4444 (0x1 << 5) /* 16 bpp - ARGB */ -#define TEX_COL_ARGB1555 (0x2 << 5) /* 16 bpp - ARGB */ -#define TEX_COL_ALPHA4 (0x3 << 5) /* 8 bpp - ALPHA4 */ -#define TEX_COL_BLEND4_LOW (0x4 << 5) /* 4 bpp - BLEND4 low nibble */ -#define TEX_COL_BLEND4_HIGH (0x5 << 5) /* 4 bpp - BLEND4 high nibble */ -#define TEX_COL_PAL (0x6 << 5) /* 8 bpp - palettized */ -#define TEX_COL_YUV (0x7 << 5) /* 16 bpp - YUV */ -/* Mipmap level */ -#define MIP_MASK 0x00000f00 -#define MIPMAP_LEVEL(s) (s << 8) /* 8 -> 11 bits */ -/* Texture filtering */ -#define TEX_FILTER_MASK 0x00007000 -#define MIP_NEAREST (0x0 << 12) -#define LINEAR_MIP_NEAREST (0x1 << 12) -#define MIP_LINEAR (0x2 << 12) -#define LINEAR_MIP_LINEAR (0x3 << 12) -#define NEAREST (0x4 << 12) -#define FAST_BILINEAR (0x5 << 12) -#define LINEAR (0x6 << 12) -/* Texture blending */ -#define TEX_BLEND_MAKS 0x00018000 -#define TEX_REFLECT (0x0 << 15) -#define TEX_MODULATE (0x1 << 15) -#define TEX_DECAL (0x2 << 15) -/* Fog */ -#define FOG_MASK 0x00020000 -#define FOG_OFF (0x0 << 17) -#define FOG_ON (0x1 << 17) -/* Alpha blending */ -#define ALPHA_BLEND_MASK 0x000c0000 -#define ALPHA_OFF (0x0 << 18) | (0x0 << 19) -#define ALPHA_TEX (0x2 << 18) -#define ALPHA_SRC (0x3 << 18) -/* Depth compare mode */ -#define Z_MODE_MASK 0x00700000 -#define Z_NEVER (0x0 << 20) -#define Z_GREATER (0x1 << 20) -#define Z_EQUAL (0x2 << 20) -#define Z_GEQUAL (0x3 << 20) -#define Z_LESS (0x4 << 20) -#define Z_NOTEQUAL (0x5 << 20) -#define Z_LEQUAL (0x6 << 20) -#define Z_ALWAYS (0x7 << 20) -/* Depth update */ -#define Z_UPDATE_MASK 0x00800000 -#define Z_UPDATE_OFF (0x0 << 23) /* disable z update */ -#define Z_UPDATE_ON (0x1 << 23) -/* Depth buffering mode */ -#define Z_BUFFER_MASK 0x03000000 -#define Z_BUFFER (0x0 << 24) | (0x0 << 25) -#define Z_MUX_BUF (0x1 << 24) | (0x0 << 25) -#define Z_MUX_DRAW (0x2 << 24) -#define Z_OFF (0x3 << 24) /* no z buffering */ -/* Texture wrapping */ -#define TEX_WRAP_MASK 0x04000000 -#define TEX_WRAP_OFF (0x0 << 26) -#define TEX_WRAP_ON (0x1 << 26) -/* 3d command */ -#define DO_MASK 0x78000000 -#define DO_GOURAUD_TRI (0x0 << 27) -#define DO_TEX_LIT_TRI_OLD (0x1 << 27) -#define DO_TEX_UNLIT_TRI_OLD (0x2 << 27) -#define DO_TEX_LIT_TRI (0x5 << 27) -#define DO_TEX_UNLIT_TRI (0x6 << 27) -#define DO_3D_LINE (0x8 << 27) -#define DO_NOP (0xf << 27) /* turn on autoexec */ -/* status */ -#define CMD_MASK 0x80000000 -#define CMD_2D (0x0 << 31) /* execute a 2d cmd */ -#define CMD_3D (0x1 << 31) /* execute a 3d cmd */ - -/* global masks */ -#define TEX_MASK ( TEX_COL_MASK | TEX_WRAP_MASK | MIP_MASK \ - | TEX_FILTER_MASK | TEX_BLEND_MAKS \ - | TEX_WRAP_MASK ) -#define Z_MASK ( Z_MODE_MASK | Z_UPDATE_MASK | Z_BUFFER_MASK ) - -#endif /* _S3V_REG_H */ diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_render.c b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_render.c deleted file mode 100644 index 6aaa94976..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_render.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#include "glheader.h" -#include "context.h" -#include "macros.h" -#include "mtypes.h" - -#include "tnl/t_context.h" - -#include "s3v_context.h" -#include "s3v_tris.h" -#include "s3v_vb.h" - - -#define HAVE_POINTS 0 -#define HAVE_LINES 0 -#define HAVE_LINE_STRIPS 0 -#define HAVE_TRIANGLES 0 -#define HAVE_TRI_STRIPS 0 -#define HAVE_TRI_STRIP_1 0 -#define HAVE_TRI_FANS 0 -#define HAVE_QUADS 0 -#define HAVE_QUAD_STRIPS 0 -#define HAVE_POLYGONS 0 - -#define HAVE_ELTS 0 - -#if 0 -static void VERT_FALLBACK( GLcontext *ctx, - GLuint start, - GLuint count, - GLuint flags ) -{ - TNLcontext *tnl = TNL_CONTEXT(ctx); -/* s3vContextPtr vmesa = S3V_CONTEXT(ctx); */ - int _flags; - - DEBUG(("VERT_FALLBACK: flags & PRIM_MODE_MASK = %i\n", - flags & PRIM_MODE_MASK)); - DEBUG(("VERT_FALLBACK: flags=%i PRIM_MODE_MASK=%i\n", - flags, PRIM_MODE_MASK)); -#if 0 - tnl->Driver.Render.PrimitiveNotify( ctx, flags & PRIM_MODE_MASK ); -#endif - tnl->Driver.Render.BuildVertices( ctx, start, count, ~0 ); - - _flags = flags & PRIM_MODE_MASK; - - tnl->Driver.Render.PrimTabVerts[_flags]( ctx, start, count, flags ); - S3V_CONTEXT(ctx)->SetupNewInputs = VERT_BIT_POS; -} -#endif - -static const GLuint hw_prim[GL_POLYGON+1] = { - PrimType_Points, - PrimType_Lines, - PrimType_LineLoop, - PrimType_LineStrip, - PrimType_Triangles, - PrimType_TriangleStrip, - PrimType_TriangleFan, - PrimType_Quads, - PrimType_QuadStrip, - PrimType_Polygon -}; - -static __inline void s3vStartPrimitive( s3vContextPtr vmesa, GLenum prim ) -{ - __DRIdrawablePrivate *dPriv = vmesa->driDrawable; - - int _hw_prim = hw_prim[prim]; - - DEBUG(("s3vStartPrimitive (new #%i) ", prim)); - - if (_hw_prim != vmesa->restore_primitive) { - - if (prim == 4) { /* TRI */ - DEBUG(("switching to tri\n")); - vmesa->prim_cmd = vmesa->_tri[vmesa->_3d_mode]; - vmesa->alpha_cmd = vmesa->_alpha[vmesa->_3d_mode]; - DMAOUT_CHECK(3DTRI_Z_BASE, 12); - } else if (prim == 1) { /* LINE */ - DEBUG(("switching to line\n")); - vmesa->prim_cmd = DO_3D_LINE; - vmesa->alpha_cmd = vmesa->_alpha[0]; - DMAOUT_CHECK(3DLINE_Z_BASE, 12); - } else { - DEBUG(("Never mind the bollocks!\n")); - } - - DMAOUT(vmesa->s3vScreen->depthOffset & 0x003FFFF8); - DMAOUT(vmesa->DestBase); - /* DMAOUT(vmesa->ScissorLR); */ - /* DMAOUT(vmesa->ScissorTB); */ - DMAOUT( (0 << 16) | (dPriv->w-1) ); - DMAOUT( (0 << 16) | (dPriv->h-1) ); - DMAOUT( (vmesa->SrcStride << 16) | vmesa->TexStride ); - DMAOUT(vmesa->SrcStride); - DMAOUT(vmesa->TexOffset); - DMAOUT(vmesa->TextureBorderColor); - DMAOUT(0); /* FOG */ - DMAOUT(0); - DMAOUT(0); - DMAOUT(vmesa->CMD | vmesa->prim_cmd | vmesa->alpha_cmd); - DMAFINISH(); - } - - vmesa->restore_primitive = _hw_prim; -} - -static __inline void s3vEndPrimitive( s3vContextPtr vmesa ) -{ -/* GLcontext *ctx = vmesa->glCtx; */ - DEBUG(("s3vEndPrimitive\n")); -} - -#define LOCAL_VARS s3vContextPtr vmesa = S3V_CONTEXT(ctx) -#define INIT( prim ) s3vStartPrimitive( vmesa, prim ) -#define FINISH s3vEndPrimitive( vmesa ) -#define NEW_PRIMITIVE() (void) vmesa -#define NEW_BUFFER() (void) vmesa -#define FIRE_VERTICES() (void) vmesa -#define GET_CURRENT_VB_MAX_VERTS() \ - (vmesa->bufSize - vmesa->bufCount) / 2 -#define GET_SUBSEQUENT_VB_MAX_VERTS() \ - S3V_DMA_BUF_SZ / 2 -/* XXX */ -#define ALLOC_VERTS(nr) NULL -#define EMIT_VERTS(ctx, start, count, buf) NULL -#define FLUSH() s3vEndPrimitive( vmesa ) - -#define TAG(x) s3v_##x - -#include "tnl_dd/t_dd_dmatmp.h" - -/**********************************************************************/ -/* Render pipeline stage */ -/**********************************************************************/ - - -static GLboolean s3v_run_render( GLcontext *ctx, - struct tnl_pipeline_stage *stage ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - TNLcontext *tnl = TNL_CONTEXT(ctx); - struct vertex_buffer *VB = &tnl->vb; - GLuint i; - tnl_render_func *tab; - - DEBUG(("s3v_run_render\n")); - - /* FIXME: hw clip */ - if (VB->ClipOrMask || vmesa->RenderIndex != 0) { - DEBUG(("*** CLIPPED in render ***\n")); -#if 1 - return GL_TRUE; /* don't handle clipping here */ -#endif - } - - - /* We don't do elts */ - if (VB->Elts) - return GL_TRUE; - - tab = TAG(render_tab_verts); - - tnl->Driver.Render.Start( ctx ); - - for (i = 0 ; i < VB->PrimitiveCount ; i++ ) - { - GLuint prim = VB->Primitive[i].mode; - GLuint start = VB->Primitive[i].start; - GLuint length = VB->Primitive[i].count; - - DEBUG(("s3v_run_render (loop=%i) (lenght=%i)\n", i, length)); - - if (length) { - tnl->Driver.Render.BuildVertices( ctx, start, - start+length, ~0 /*stage->inputs*/); /* XXX */ - tnl->Driver.Render.PrimTabVerts[prim & PRIM_MODE_MASK] - ( ctx, start, start + length, prim ); - vmesa->SetupNewInputs = VERT_BIT_POS; - } - } - - tnl->Driver.Render.Finish( ctx ); - - return GL_FALSE; /* finished the pipe */ -} - - - -const struct tnl_pipeline_stage _s3v_render_stage = -{ - "s3v render", - NULL, - NULL, - NULL, - NULL, - s3v_run_render /* run */ -}; diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_screen.c b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_screen.c deleted file mode 100644 index f1810597e..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_screen.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#include "s3v_context.h" -#include "s3v_vb.h" -#include "s3v_dri.h" - -s3vScreenPtr s3vCreateScreen( __DRIscreenPrivate *sPriv ) -{ - s3vScreenPtr s3vScreen; - S3VDRIPtr vDRIPriv = (S3VDRIPtr)sPriv->pDevPriv; - -/* int i; */ - - DEBUG(("s3vCreateScreen\n")); - DEBUG(("sPriv->pDevPriv at %p\n", sPriv->pDevPriv)); - DEBUG(("size = %i\n", sizeof(*vDRIPriv))); - - if (sPriv->devPrivSize != sizeof(S3VDRIRec)) { - fprintf(stderr,"\nERROR! sizeof(S3VDRIRec) does not match passed size from device driver\n"); - return GL_FALSE; - } - - /* Allocate the private area */ - s3vScreen = (s3vScreenPtr) CALLOC( sizeof(*s3vScreen) ); - if ( !s3vScreen ) return NULL; - - s3vScreen->regionCount = 4; /* Magic number. Can we fix this? */ - - s3vScreen->regions = _mesa_malloc(s3vScreen->regionCount * - sizeof(s3vRegion)); - DEBUG(("sPriv->fd = %i\nvDRIPriv->dmaBufHandle = %x\n", - sPriv->fd, vDRIPriv->dmaBufHandle)); - - DEBUG(("vDRIPriv->dmaBufSize=%i\nvDRIPriv->dmaBuf=%p\n", - vDRIPriv->dmaBufSize, vDRIPriv->dmaBuf)); - - - /* Get the list of dma buffers */ - s3vScreen->bufs = drmMapBufs(sPriv->fd); - - if (!s3vScreen->bufs) { - DEBUG(("Helter/skelter with drmMapBufs\n")); - return GL_FALSE; - } - - s3vScreen->textureSize = vDRIPriv->texSize; - s3vScreen->logTextureGranularity = vDRIPriv->logTextureGranularity; - s3vScreen->cpp = vDRIPriv->cpp; - s3vScreen->frontOffset = vDRIPriv->frontOffset; - s3vScreen->frontPitch = vDRIPriv->frontPitch; - s3vScreen->backOffset = vDRIPriv->backOffset; - s3vScreen->backPitch = vDRIPriv->frontPitch; /* FIXME: check */ - s3vScreen->depthOffset = vDRIPriv->depthOffset; - s3vScreen->depthPitch = vDRIPriv->frontPitch; - s3vScreen->texOffset = vDRIPriv->texOffset; - - s3vScreen->driScreen = sPriv; - - DEBUG(("vDRIPriv->width =%i; vDRIPriv->deviceID =%x\n", vDRIPriv->width, - vDRIPriv->deviceID)); - DEBUG(("vDRIPriv->mem =%i\n", vDRIPriv->mem)); - DEBUG(("vDRIPriv->fbOffset =%i\n", vDRIPriv->fbOffset)); - DEBUG((" ps3vDRI->fbStride =%i\n", vDRIPriv->fbStride)); - DEBUG(("s3vScreen->cpp = %i\n", s3vScreen->cpp)); - DEBUG(("s3vScreen->backOffset = %x\n", s3vScreen->backOffset)); - DEBUG(("s3vScreen->depthOffset = %x\n", s3vScreen->depthOffset)); - DEBUG(("s3vScreen->texOffset = %x\n", s3vScreen->texOffset)); - DEBUG(("I will return from s3vCreateScreen now\n")); - - DEBUG(("s3vScreen->bufs = 0x%x\n", s3vScreen->bufs)); - return s3vScreen; -} - -/* Destroy the device specific screen private data struct. - */ -void s3vDestroyScreen( __DRIscreenPrivate *sPriv ) -{ - s3vScreenPtr s3vScreen = (s3vScreenPtr)sPriv->private; - - DEBUG(("s3vDestroyScreen\n")); - - /* First, unmap the dma buffers */ -/* - drmUnmapBufs( s3vScreen->bufs ); -*/ - /* Next, unmap all the regions */ -/* while (s3vScreen->regionCount > 0) { - - (void)drmUnmap(s3vScreen->regions[s3vScreen->regionCount].map, - s3vScreen->regions[s3vScreen->regionCount].size); - s3vScreen->regionCount--; - - } - FREE(s3vScreen->regions); */ - if (s3vScreen) - FREE(s3vScreen); -} diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_screen.h b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_screen.h deleted file mode 100644 index 0c4f69efa..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_screen.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#include "mtypes.h" - -typedef struct _s3vRegion { - drm_handle_t handle; - drmSize size; - drmAddress map; -} s3vRegion, *s3vRegionPtr; - -typedef struct { - - int regionCount; /* Count of register regions */ - s3vRegion *regions; /* Vector of mapped region info */ - - drmBufMapPtr bufs; /* Map of DMA buffers */ - - __DRIscreenPrivate *driScreen; /* Back pointer to DRI screen */ - - int cpp; - int frontPitch; - int frontOffset; - - int backPitch; - int backOffset; - int backX; - int backY; - - int depthOffset; - int depthPitch; - - int texOffset; - int textureOffset; - int textureSize; - int logTextureGranularity; -} s3vScreenRec, *s3vScreenPtr; - diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_span.c b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_span.c deleted file mode 100644 index 49135a9c3..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_span.c +++ /dev/null @@ -1,334 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#include "s3v_context.h" -#include "s3v_lock.h" - -#include "swrast/swrast.h" - -#define _SPANLOCK 1 -#define DBG 0 - -#define LOCAL_VARS \ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); \ - s3vScreenPtr s3vscrn = vmesa->s3vScreen; \ - __DRIscreenPrivate *sPriv = vmesa->driScreen; \ - __DRIdrawablePrivate *dPriv = vmesa->driDrawable; \ - GLuint pitch = ( (vmesa->Flags & S3V_BACK_BUFFER) ? \ - ((dPriv->w+31)&~31) * s3vscrn->cpp \ - : sPriv->fbWidth * s3vscrn->cpp); \ - GLuint height = dPriv->h; \ - char *buf = ( (vmesa->Flags & S3V_BACK_BUFFER) ? \ - (char *)(sPriv->pFB + vmesa->drawOffset) \ - : (char *)(sPriv->pFB + vmesa->drawOffset \ - + dPriv->x * s3vscrn->cpp + dPriv->y * pitch) ); \ - char *read_buf = ( (vmesa->Flags & S3V_BACK_BUFFER) ? \ - (char *)(sPriv->pFB + vmesa->drawOffset) \ - : (char *)(sPriv->pFB + vmesa->drawOffset \ - + dPriv->x * s3vscrn->cpp + dPriv->y * pitch) ); \ - GLuint p; \ - (void) read_buf; (void) buf; (void) p; (void) pitch - -/* FIXME! Depth/Stencil read/writes don't work ! */ -#define LOCAL_DEPTH_VARS \ - s3vScreenPtr s3vscrn = vmesa->s3vScreen; \ - __DRIdrawablePrivate *dPriv = vmesa->driDrawable; \ - __DRIscreenPrivate *sPriv = vmesa->driScreen; \ - GLuint pitch = s3vscrn->depthPitch; \ - GLuint height = dPriv->h; \ - char *buf = (char *)(sPriv->pFB + \ - s3vscrn->depthOffset); /* + \ - dPriv->x * s3vscrn->cpp + \ - dPriv->y * pitch)*/ \ - (void) pitch - -#define LOCAL_STENCIL_VARS LOCAL_DEPTH_VARS - -#define Y_FLIP( _y ) (height - _y - 1) - -#if _SPANLOCK /* OK, we lock */ - -#define HW_LOCK() \ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); \ - (void) vmesa; \ - DMAFLUSH(); \ - S3V_SIMPLE_FLUSH_LOCK(vmesa); -#define HW_UNLOCK() S3V_SIMPLE_UNLOCK(vmesa); - -#else /* plz, don't lock */ - -#define HW_LOCK() \ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); \ - (void) vmesa; \ - DMAFLUSH(); -#define HW_UNLOCK() - -#endif - - -/* ================================================================ - * Color buffer - */ - -/* 16 bit, RGB565 color spanline and pixel functions - */ -#define INIT_MONO_PIXEL(p, color) \ - p = S3VIRGEPACKCOLOR555( color[0], color[1], color[2], color[3] ) - -#define WRITE_RGBA( _x, _y, r, g, b, a ) \ -do { \ - *(GLushort *)(buf + _x*2 + _y*pitch) = ((((int)r & 0xf8) << 7) | \ - (((int)g & 0xf8) << 2) | \ - (((int)b & 0xf8) >> 3)); \ - DEBUG(("buf=0x%x drawOffset=0x%x dPriv->x=%i s3vscrn->cpp=%i dPriv->y=%i pitch=%i\n", \ - sPriv->pFB, vmesa->drawOffset, dPriv->x, s3vscrn->cpp, dPriv->y, pitch)); \ - DEBUG(("dPriv->w = %i\n", dPriv->w)); \ -} while(0) - -#define WRITE_PIXEL( _x, _y, p ) \ - *(GLushort *)(buf + _x*2 + _y*pitch) = p - -#define READ_RGBA( rgba, _x, _y ) \ - do { \ - GLushort p = *(GLushort *)(read_buf + _x*2 + _y*pitch); \ - rgba[0] = (p >> 7) & 0xf8; \ - rgba[1] = (p >> 2) & 0xf8; \ - rgba[2] = (p << 3) & 0xf8; \ - rgba[3] = 0xff; /* - if ( rgba[0] & 0x08 ) rgba[0] |= 0x07; \ - if ( rgba[1] & 0x04 ) rgba[1] |= 0x03; \ - if ( rgba[2] & 0x08 ) rgba[2] |= 0x07; */ \ - } while (0) - -#define TAG(x) s3v##x##_RGB555 -#include "spantmp.h" - - -/* 32 bit, ARGB8888 color spanline and pixel functions - */ - -#undef INIT_MONO_PIXEL -#define INIT_MONO_PIXEL(p, color) \ - p = PACK_COLOR_8888( color[3], color[0], color[1], color[2] ) - -#define WRITE_RGBA( _x, _y, r, g, b, a ) \ - *(GLuint *)(buf + _x*4 + _y*pitch) = ((b << 0) | \ - (g << 8) | \ - (r << 16) | \ - (a << 24) ) - -#define WRITE_PIXEL( _x, _y, p ) \ - *(GLuint *)(buf + _x*4 + _y*pitch) = p - -#define READ_RGBA( rgba, _x, _y ) \ -do { \ - GLuint p = *(GLuint *)(read_buf + _x*4 + _y*pitch); \ - rgba[0] = (p >> 16) & 0xff; \ - rgba[1] = (p >> 8) & 0xff; \ - rgba[2] = (p >> 0) & 0xff; \ - rgba[3] = (p >> 24) & 0xff; \ -} while (0) - -#define TAG(x) s3v##x##_ARGB8888 -#include "spantmp.h" - - -/* 16 bit depthbuffer functions. - */ -#define WRITE_DEPTH( _x, _y, d ) \ - *(GLushort *)(buf + _x*2 + _y*dPriv->w*2) = d - -#define READ_DEPTH( d, _x, _y ) \ - d = *(GLushort *)(buf + _x*2 + _y*dPriv->w*2); - -#define TAG(x) s3v##x##_16 -#include "depthtmp.h" - - - - -/* 32 bit depthbuffer functions. - */ -#if 0 -#define WRITE_DEPTH( _x, _y, d ) \ - *(GLuint *)(buf + _x*4 + _y*pitch) = d; - -#define READ_DEPTH( d, _x, _y ) \ - d = *(GLuint *)(buf + _x*4 + _y*pitch); - -#define TAG(x) s3v##x##_32 -#include "depthtmp.h" -#endif - - -/* 24/8 bit interleaved depth/stencil functions - */ -#if 0 -#define WRITE_DEPTH( _x, _y, d ) { \ - GLuint tmp = *(GLuint *)(buf + _x*4 + _y*pitch); \ - tmp &= 0xff; \ - tmp |= (d) & 0xffffff00; \ - *(GLuint *)(buf + _x*4 + _y*pitch) = tmp; \ -} - -#define READ_DEPTH( d, _x, _y ) \ - d = *(GLuint *)(buf + _x*4 + _y*pitch) & ~0xff - - -#define TAG(x) s3v##x##_24_8 -#include "depthtmp.h" - -#define WRITE_STENCIL( _x, _y, d ) { \ - GLuint tmp = *(GLuint *)(buf + _x*4 + _y*pitch); \ - tmp &= 0xffffff00; \ - tmp |= d & 0xff; \ - *(GLuint *)(buf + _x*4 + _y*pitch) = tmp; \ -} - -#define READ_STENCIL( d, _x, _y ) \ - d = *(GLuint *)(buf + _x*4 + _y*pitch) & 0xff - -#define TAG(x) s3v##x##_24_8 -#include "stenciltmp.h" - -#endif - -static void s3vSetBuffer( GLcontext *ctx, GLframebuffer *colorBuffer, - GLuint bufferBit ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - - switch ( bufferBit ) { - case BUFFER_BIT_FRONT_LEFT: - vmesa->drawOffset = vmesa->readOffset = 0; - break; - case BUFFER_BIT_BACK_LEFT: - vmesa->drawOffset = vmesa->readOffset = vmesa->driScreen->fbHeight * - vmesa->driScreen->fbWidth * - vmesa->s3vScreen->cpp; - break; - } -} - - -void s3vInitSpanFuncs( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - struct swrast_device_driver *swdd = _swrast_GetDeviceDriverReference(ctx); - - swdd->SetBuffer = s3vSetBuffer; - -#if 0 - switch ( vmesa->s3vScreen->cpp ) { - case 2: - swdd->WriteRGBASpan = s3vWriteRGBASpan_RGB555; - swdd->WriteRGBSpan = s3vWriteRGBSpan_RGB555; - swdd->WriteMonoRGBASpan = s3vWriteMonoRGBASpan_RGB555; - swdd->WriteRGBAPixels = s3vWriteRGBAPixels_RGB555; - swdd->WriteMonoRGBAPixels = s3vWriteMonoRGBAPixels_RGB555; - swdd->ReadRGBASpan = s3vReadRGBASpan_RGB555; - swdd->ReadRGBAPixels = s3vReadRGBAPixels_RGB555; - break; - - case 4: - swdd->WriteRGBASpan = s3vWriteRGBASpan_ARGB8888; - swdd->WriteRGBSpan = s3vWriteRGBSpan_ARGB8888; - swdd->WriteMonoRGBASpan = s3vWriteMonoRGBASpan_ARGB8888; - swdd->WriteRGBAPixels = s3vWriteRGBAPixels_ARGB8888; - swdd->WriteMonoRGBAPixels = s3vWriteMonoRGBAPixels_ARGB8888; -#if 1 - swdd->ReadRGBASpan = s3vReadRGBASpan_ARGB8888; -#else - swdd->ReadRGBASpan = s3vReadRGBASpan8888; -#endif - swdd->ReadRGBAPixels = s3vReadRGBAPixels_ARGB8888; - break; - - default: - break; - } -#endif - - switch ( vmesa->glCtx->Visual.depthBits ) { - case 15: - case 16: -#if 0 - swdd->ReadDepthSpan = s3vReadDepthSpan_16; - swdd->WriteDepthSpan = s3vWriteDepthSpan_16; - swdd->ReadDepthPixels = s3vReadDepthPixels_16; - swdd->WriteDepthPixels = s3vWriteDepthPixels_16; -#endif - break; - -#if 0 - case 24: - swdd->ReadDepthSpan = s3vReadDepthSpan_24_8; - swdd->WriteDepthSpan = s3vWriteDepthSpan_24_8; - swdd->ReadDepthPixels = s3vReadDepthPixels_24_8; - swdd->WriteDepthPixels = s3vWriteDepthPixels_24_8; - - swdd->ReadStencilSpan = s3vReadStencilSpan_24_8; - swdd->WriteStencilSpan = s3vWriteStencilSpan_24_8; - swdd->ReadStencilPixels = s3vReadStencilPixels_24_8; - swdd->WriteStencilPixels = s3vWriteStencilPixels_24_8; - break; -#endif - - default: - break; - } -} - - -/** - * Plug in the Get/Put routines for the given driRenderbuffer. - */ -void -s3vSetSpanFunctions(driRenderbuffer *drb, const GLvisual *vis) -{ - if (drb->Base.InternalFormat == GL_RGBA) { - if (vis->redBits == 5 && vis->greenBits == 6 && vis->blueBits == 5) { - drb->Base.GetRow = s3vReadRGBASpan_RGB555; - drb->Base.GetValues = s3vReadRGBAPixels_RGB555; - drb->Base.PutRow = s3vWriteRGBASpan_RGB555; - drb->Base.PutRowRGB = s3vWriteRGBSpan_RGB555; - drb->Base.PutMonoRow = s3vWriteMonoRGBASpan_RGB555; - drb->Base.PutValues = s3vWriteRGBAPixels_RGB555; - drb->Base.PutMonoValues = s3vWriteMonoRGBAPixels_RGB555; - } - else { - drb->Base.GetRow = s3vReadRGBASpan_ARGB8888; - drb->Base.GetValues = s3vReadRGBAPixels_ARGB8888; - drb->Base.PutRow = s3vWriteRGBASpan_ARGB8888; - drb->Base.PutRowRGB = s3vWriteRGBSpan_ARGB8888; - drb->Base.PutMonoRow = s3vWriteMonoRGBASpan_ARGB8888; - drb->Base.PutValues = s3vWriteRGBAPixels_ARGB8888; - drb->Base.PutMonoValues = s3vWriteMonoRGBAPixels_ARGB8888; - } - } - else if (drb->Base.InternalFormat == GL_DEPTH_COMPONENT16) { - drb->Base.GetRow = s3vReadDepthSpan_16; - drb->Base.GetValues = s3vReadDepthPixels_16; - drb->Base.PutRow = s3vWriteDepthSpan_16; - drb->Base.PutMonoRow = s3vWriteMonoDepthSpan_16; - drb->Base.PutValues = s3vWriteDepthPixels_16; - drb->Base.PutMonoValues = NULL; - } - else if (drb->Base.InternalFormat == GL_DEPTH_COMPONENT24) { - drb->Base.GetRow = NULL; - drb->Base.GetValues = NULL; - drb->Base.PutRow = NULL; - drb->Base.PutMonoRow = NULL; - drb->Base.PutValues = NULL; - drb->Base.PutMonoValues = NULL; - } - else if (drb->Base.InternalFormat == GL_STENCIL_INDEX8_EXT) { - drb->Base.GetRow = NULL; - drb->Base.GetValues = NULL; - drb->Base.PutRow = NULL; - drb->Base.PutMonoRow = NULL; - drb->Base.PutValues = NULL; - drb->Base.PutMonoValues = NULL; - } -} diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_state.c b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_state.c deleted file mode 100644 index 84aaf4c5b..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_state.c +++ /dev/null @@ -1,888 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#include <X11/Xlibint.h> -#include "s3v_context.h" -#include "s3v_macros.h" -#include "macros.h" -#include "s3v_dri.h" -#include "colormac.h" -#include "swrast/swrast.h" -#include "swrast_setup/swrast_setup.h" -#include "array_cache/acache.h" -#include "tnl/tnl.h" - -/* #define DEBUG(str) printf str */ -#define ENABLELIGHTING 0 - - -/* ============================================================= - * Alpha blending - */ - -static void s3vUpdateAlphaMode( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - CARD32 cmd = vmesa->CMD; - cmd &= ~ALPHA_BLEND_MASK; - - if ( ctx->Color.BlendEnabled ) { - DEBUG(("ctx->Color.AlphaEnabled = 1")); - vmesa->_alpha[0] = ALPHA_SRC; - vmesa->_alpha[1] = vmesa->_alpha_tex; /* FIXME: not all tex modes - support alpha */ - } else { - DEBUG(("ctx->Color.AlphaEnabled = 0")); - vmesa->_alpha[0] = vmesa->_alpha[1] = ALPHA_OFF; - } -#if 1 - if ((cmd & DO_MASK) & DO_3D_LINE) { /* we are drawing 3d lines */ - /* which don't support tex */ - cmd |= vmesa->_alpha[0]; - } else { - cmd |= vmesa->_alpha[vmesa->_3d_mode]; - } - - vmesa->CMD = cmd; /* FIXME: enough? */ -#else - vmesa->restore_primitive = -1; -#endif - -} - -static void s3vDDAlphaFunc( GLcontext *ctx, GLenum func, GLfloat ref ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - - DEBUG(("s3vDDAlphaFunc\n")); - - vmesa->new_state |= S3V_NEW_ALPHA; -} - -static void s3vDDBlendFunc( GLcontext *ctx, GLenum sfactor, GLenum dfactor ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - - DEBUG(("s3vDDBlendFunc\n")); - - vmesa->new_state |= S3V_NEW_ALPHA; -} - -/* ================================================================ - * Buffer clear - */ - -static void s3vDDClear( GLcontext *ctx, GLbitfield mask, GLboolean all, - GLint cx, GLint cy, GLint cw, GLint ch ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - unsigned int _stride; - - vmesa->restore_primitive = -1; - - /* Update and emit any new state. We need to do this here to catch - * changes to the masks. - * FIXME: Just update the masks? - */ - - if ( vmesa->new_state ) - s3vDDUpdateHWState( ctx ); - -/* s3vUpdateMasks( ctx ); */ -/* s3vUpdateClipping( ctx ); */ -/* s3vEmitHwState( vmesa ); */ - - -#if 1 /* soft (0)/hw (1)*/ - - DEBUG(("*** s3vDDClear ***\n")); - - DMAOUT_CHECK(BITBLT_SRC_BASE, 15); - DMAOUT(vmesa->SrcBase); - DMAOUT(vmesa->DestBlit); - DMAOUT( vmesa->ScissorLR ); - DMAOUT( vmesa->ScissorTB ); - DMAOUT( (vmesa->SrcStride << 16) | vmesa->SrcStride ); /* FIXME: unify */ - DMAOUT( (~(0)) ); /* masks */ - DMAOUT( (~(0)) ); - DMAOUT(0); - DMAOUT(vmesa->ClearColor); - DMAOUT(0); - DMAOUT(0); - /* FIXME */ - DMAOUT(0x16000122 | 0x5 | (0xF0 << 17)); /* black magic to me */ - DMAOUT(vmesa->ScissorWH); - DMAOUT(vmesa->SrcXY); - DMAOUT(vmesa->DestXY); - DMAFINISH(); - - if (mask & BUFFER_BIT_DEPTH) { /* depth */ - DEBUG(("BUFFER_BIT_DEPTH\n")); - - _stride = ((cw+31)&~31) * 2; - - DMAOUT_CHECK(BITBLT_SRC_BASE, 15); - DMAOUT(0); - DMAOUT(vmesa->s3vScreen->depthOffset); - DMAOUT( (0 << 16) | cw ); - DMAOUT( (0 << 16) | ch ); - DMAOUT( (vmesa->SrcStride << 16) | vmesa->DestStride ); - DMAOUT( (~(0)) ); /* masks */ - DMAOUT( (~(0)) ); - DMAOUT(0); - DMAOUT(vmesa->ClearDepth); /* 0x7FFF */ - /* FIXME */ - DMAOUT(0); - DMAOUT(0); - DMAOUT(0x16000122 | 0x5 | (0xF0 << 17)); - DMAOUT( ((cw-1) << 16) | (ch-1) ); - DMAOUT(0); - DMAOUT( (0 << 16) | 0 ); - DMAFINISH(); - - DEBUG(("vmesa->ClearDepth = 0x%x\n", vmesa->ClearDepth)); - mask &= ~BUFFER_BIT_DEPTH; - } - - if (!vmesa->NotClipped) { - DEBUG(("vmesa->NotClipped\n")); /* yes */ - } - - if (!(vmesa->EnabledFlags & S3V_BACK_BUFFER)) { - DEBUG(("!S3V_BACK_BUFFER -> flush\n")); - DMAFLUSH(); - } -/* - if ( mask ) - DEBUG(("still masked ;3(\n")); */ /* yes */ -#else - _swrast_Clear( ctx, mask, all, cx, cy, cw, ch ); -#endif -} - -/* ============================================================= - * Depth testing - */ - -static void s3vUpdateZMode( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - CARD32 cmd = vmesa->CMD; - - DEBUG(("Depth.Test = %i\n", ctx->Depth.Test)); - DEBUG(("CMD was = 0x%x ", cmd)); - -/* printf("depth --- CMD was = 0x%x \n", cmd); */ - - cmd &= ~Z_MASK; /* 0xfc0fffff; */ - /* Z_BUFFER */ /* 000 mode */ /* Z_UPDATE_OFF */ - - if (!ctx->Depth.Test) - cmd |= Z_OFF; - - if ( ctx->Depth.Mask ) - cmd |= Z_UPDATE_ON; - - switch ( ctx->Depth.Func ) { - case GL_NEVER: - cmd |= Z_NEVER; - break; - case GL_ALWAYS: - cmd |= Z_ALWAYS; - break; - case GL_LESS: - cmd |= Z_LESS; - break; - case GL_LEQUAL: - cmd |= Z_LEQUAL; - break; - case GL_EQUAL: - cmd |= Z_EQUAL; - break; - case GL_GEQUAL: - cmd |= Z_GEQUAL; - break; - case GL_GREATER: - cmd |= Z_GREATER; - break; - case GL_NOTEQUAL: - cmd |= Z_NOTEQUAL; - break; - } - - DEBUG(("CMD is 0x%x\n", cmd)); - - vmesa->dirty |= S3V_UPLOAD_DEPTH; - vmesa->CMD = cmd; -} - -static void s3vDDDepthFunc( GLcontext *ctx, GLenum func ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - -/* FLUSH_BATCH( vmesa ); */ - DEBUG(("s3vDDDepthFunc\n")); - vmesa->new_state |= S3V_NEW_DEPTH; -} - -static void s3vDDDepthMask( GLcontext *ctx, GLboolean flag ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - - /* FLUSH_BATCH( vmesa ); */ - DEBUG(("s3vDDDepthMask\n")); - vmesa->new_state |= S3V_NEW_DEPTH; -} - -static void s3vDDClearDepth( GLcontext *ctx, GLclampd d ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - - switch ( vmesa->DepthSize ) { - case 15: - case 16: - vmesa->ClearDepth = d * 0x0000ffff; /* 65536 */ - DEBUG(("GLclampd d = %f\n", d)); - DEBUG(("ctx->Depth.Clear = %f\n", ctx->Depth.Clear)); - DEBUG(("(They should be the same)\n")); - break; - case 24: - vmesa->ClearDepth = d * 0x00ffffff; - break; - case 32: - vmesa->ClearDepth = d * 0xffffffff; - break; - } -} - -static void s3vDDFinish( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - DMAFLUSH(); -} - -static void s3vDDFlush( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - DMAFLUSH(); -} - -/* ============================================================= - * Fog - */ - -static void s3vUpdateFogAttrib( GLcontext *ctx ) -{ -/* s3vContextPtr vmesa = S3V_CONTEXT(ctx); */ - - if (ctx->Fog.Enabled) { - } else { - } - - switch (ctx->Fog.Mode) { - case GL_LINEAR: - break; - case GL_EXP: - break; - case GL_EXP2: - break; - } -} - -static void s3vDDFogfv( GLcontext *ctx, GLenum pname, const GLfloat *param ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - vmesa->new_state |= S3V_NEW_FOG; -} - -/* ============================================================= - * Lines - */ -static void s3vDDLineWidth( GLcontext *ctx, GLfloat width ) -{ - /* FIXME: on virge you only have one size of 3d lines * - * if we wanted more, we should start using tris instead * - * but virge has problem with some tris when all of the * - * vertices stay on a line */ -} - -/* ============================================================= - * Points - */ -static void s3vDDPointSize( GLcontext *ctx, GLfloat size ) -{ - /* FIXME: we use 3d line to fake points. So same limitations - * as above apply */ -} - -/* ============================================================= - * Polygon - */ - -static void s3vUpdatePolygon( GLcontext *ctx ) -{ - /* FIXME: I don't think we could do much here */ - - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - vmesa->dirty |= S3V_UPLOAD_POLYGON; -} - -/* ============================================================= - * Clipping - */ - -static void s3vUpdateClipping( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - __DRIdrawablePrivate *dPriv = vmesa->driDrawable; - - int x0,y0,x1,y1; - - DEBUG((">>> s3vUpdateClipping <<<\n")); -/* - if ( vmesa->driDrawable ) { - DEBUG(("s3vUpdateClipping\n")); -*/ - if (vmesa->EnabledFlags & S3V_BACK_BUFFER) { - DEBUG(("S3V_BACK_BUFFER\n")); - - x0 = 0; - y0 = 0; - x1 = dPriv->w - 1; - y1 = dPriv->h - 1; - - vmesa->SrcBase = 0; - vmesa->DestBase = vmesa->s3vScreen->backOffset; - vmesa->DestBlit = vmesa->DestBase; - vmesa->ScissorLR = ( (0 << 16) | (dPriv->w-1) ); - vmesa->ScissorTB = ( (0 << 16) | (dPriv->h-1) ); -/* - vmesa->ScissorLR = ( (x0 << 16) | x1 ); - vmesa->ScissorTB = ( (y0 << 16) | y1 ); -*/ - vmesa->SrcStride = ( ((dPriv->w+31)&~31) * vmesa->s3vScreen->cpp ); - vmesa->DestStride = vmesa->driScreen->fbWidth*vmesa->s3vScreen->cpp; - vmesa->ScissorWH = ( (dPriv->w << 16) | dPriv->h ); - vmesa->SrcXY = 0; -/* vmesa->DestXY = ( (dPriv->x << 16) | dPriv->y ); */ - vmesa->DestXY = ( (0 << 16) | 0 ); - } else { - DEBUG(("S3V_FRONT_BUFFER\n")); - - x0 = dPriv->x; - y0 = dPriv->y; - x1 = x0 + dPriv->w - 1; - y1 = y0 + dPriv->h - 1; - - vmesa->SrcBase = 0; - vmesa->DestBase = 0; - vmesa->ScissorLR = ( (x0 << 16) | x1 ); - vmesa->ScissorTB = ( (y0 << 16) | y1 ); - vmesa->DestStride = vmesa->driScreen->fbWidth*vmesa->s3vScreen->cpp; - vmesa->SrcStride = vmesa->DestStride; - vmesa->DestBase = (y0 * vmesa->DestStride) - + x0*vmesa->s3vScreen->cpp; - vmesa->DestBlit = 0; - vmesa->ScissorWH = ( (x1 << 16) | y1 ); - vmesa->SrcXY = 0; - vmesa->DestXY = ( (0 << 16) | 0 ); -/* vmesa->DestXY = ( (dPriv->x << 16) | dPriv->y ); */ - } - - DEBUG(("x0=%i y0=%i x1=%i y1=%i\n", x0, y0, x1, y1)); - DEBUG(("stride=%i rectWH=0x%x\n\n", vmesa->DestStride, vmesa->ScissorWH)); - - /* FIXME: how could we use the following info? */ - /* if (ctx->Scissor.Enabled) {} */ - - vmesa->dirty |= S3V_UPLOAD_CLIP; -/* } */ -} - -static void s3vDDScissor( GLcontext *ctx, - GLint x, GLint y, GLsizei w, GLsizei h ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - - DEBUG((">>> s3vDDScissor <<<")); - /* FLUSH_BATCH( vmesa ); */ - vmesa->new_state |= S3V_NEW_CLIP; -} - -/* ============================================================= - * Culling - */ - -static void s3vUpdateCull( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - GLfloat backface_sign = 1; - - DEBUG(("s3vUpdateCull\n")); - /* FIXME: GL_FRONT_AND_BACK */ - - switch ( ctx->Polygon.CullFaceMode ) { - case GL_BACK: - if (ctx->Polygon.FrontFace == GL_CCW) - backface_sign = -1; - break; - - case GL_FRONT: - if (ctx->Polygon.FrontFace != GL_CCW) - backface_sign = -1; - break; - - default: - break; - } - - vmesa->backface_sign = backface_sign; - vmesa->dirty |= S3V_UPLOAD_GEOMETRY; -} - - -static void s3vDDCullFace( GLcontext *ctx, GLenum mode ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - /* FLUSH_BATCH( vmesa ); */ - vmesa->new_state |= S3V_NEW_CULL; -} - -static void s3vDDFrontFace( GLcontext *ctx, GLenum mode ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - /* FLUSH_BATCH( vmesa ); */ - vmesa->new_state |= S3V_NEW_CULL; -} - -/* ============================================================= - * Masks - */ - -static void s3vUpdateMasks( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - - GLuint mask = s3vPackColor( vmesa->s3vScreen->cpp, - ctx->Color.ColorMask[RCOMP], - ctx->Color.ColorMask[GCOMP], - ctx->Color.ColorMask[BCOMP], - ctx->Color.ColorMask[ACOMP] ); - - if (vmesa->s3vScreen->cpp == 2) mask |= mask << 16; - - /* FIXME: can we do something in virge? */ -} -/* -static void s3vDDColorMask( GLcontext *ctx, GLboolean r, GLboolean g, - GLboolean b, GLboolean a) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - - FLUSH_BATCH( vmesa ); - vmesa->new_state |= S3V_NEW_MASKS; -} -*/ -/* ============================================================= - * Rendering attributes - */ - -/* ============================================================= - * Miscellaneous - */ - -static void s3vDDClearColor( GLcontext *ctx, const GLfloat color[4]) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - - DEBUG(("*** s3vDDClearColor\n")); - - vmesa->ClearColor = s3vPackColor( 2, /* vmesa->s3vScreen->cpp, */ - color[0], color[1], color[2], color[3] ); - -#if 0 - if (vmesa->s3vScreen->cpp == 2) vmesa->ClearColor |= vmesa->ClearColor<<16; -#endif -} - -static void s3vDDSetDrawBuffer( GLcontext *ctx, GLenum mode ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - int found = GL_TRUE; - - DEBUG(("*** s3vDDSetDrawBuffer ***\n")); - - /* FLUSH_BATCH( vmesa ); */ - - switch ( mode ) { - case GL_FRONT_LEFT: - vmesa->drawOffset = vmesa->s3vScreen->frontOffset; - break; - case GL_BACK_LEFT: - vmesa->drawOffset = vmesa->s3vScreen->backOffset; - /* vmesa->driScreen->fbHeight * - * vmesa->driScreen->fbWidth * - * vmesa->s3vScreen->cpp; */ - break; - default: - found = GL_FALSE; - break; - } - - DEBUG(("vmesa->drawOffset = 0x%x\n", vmesa->drawOffset)); -/* return GL_TRUE; */ -} - -/* ============================================================= - * Window position and viewport transformation - */ - -void s3vUpdateWindow( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - __DRIdrawablePrivate *dPriv = vmesa->driDrawable; - GLfloat xoffset = (GLfloat)dPriv->x; - GLfloat yoffset = - vmesa->driScreen->fbHeight - (GLfloat)dPriv->y - dPriv->h; - const GLfloat *v = ctx->Viewport._WindowMap.m; - - GLfloat sx = v[MAT_SX]; - GLfloat tx = v[MAT_TX] + xoffset; - GLfloat sy = v[MAT_SY]; - GLfloat ty = v[MAT_TY] + yoffset; - GLfloat sz = v[MAT_SZ] * vmesa->depth_scale; - GLfloat tz = v[MAT_TZ] * vmesa->depth_scale; - - vmesa->dirty |= S3V_UPLOAD_VIEWPORT; - - vmesa->ViewportScaleX = sx; - vmesa->ViewportScaleY = sy; - vmesa->ViewportScaleZ = sz; - vmesa->ViewportOffsetX = tx; - vmesa->ViewportOffsetY = ty; - vmesa->ViewportOffsetZ = tz; -} - - -/* -static void s3vDDViewport( GLcontext *ctx, GLint x, GLint y, - GLsizei width, GLsizei height ) -{ - s3vUpdateWindow( ctx ); -} - -static void s3vDDDepthRange( GLcontext *ctx, GLclampd nearval, - GLclampd farval ) -{ - s3vUpdateWindow( ctx ); -} -*/ -void s3vUpdateViewportOffset( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - __DRIdrawablePrivate *dPriv = vmesa->driDrawable; - GLfloat xoffset = (GLfloat)dPriv->x; - GLfloat yoffset = - vmesa->driScreen->fbHeight - (GLfloat)dPriv->y - dPriv->h; - const GLfloat *v = ctx->Viewport._WindowMap.m; - - GLfloat tx = v[MAT_TX] + xoffset; - GLfloat ty = v[MAT_TY] + yoffset; - - DEBUG(("*** s3vUpdateViewportOffset ***\n")); - - if ( vmesa->ViewportOffsetX != tx || - vmesa->ViewportOffsetY != ty ) - { - vmesa->ViewportOffsetX = tx; - vmesa->ViewportOffsetY = ty; - - vmesa->new_state |= S3V_NEW_WINDOW; - } - -/* vmesa->new_state |= S3V_NEW_CLIP; */ -} - -/* ============================================================= - * State enable/disable - */ - -static void s3vDDEnable( GLcontext *ctx, GLenum cap, GLboolean state ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - - switch ( cap ) { - case GL_ALPHA_TEST: - case GL_BLEND: - vmesa->new_state |= S3V_NEW_ALPHA; - DEBUG(("s3vDDEnable: GL_BLEND\n")); - break; - - case GL_CULL_FACE: - vmesa->new_state |= S3V_NEW_CULL; - DEBUG(("s3vDDEnable: GL_CULL_FACE\n")); - break; - - case GL_DEPTH_TEST: - vmesa->new_state |= S3V_NEW_DEPTH; - DEBUG(("s3vDDEnable: GL_DEPTH\n")); - break; -#if 0 - case GL_FOG: - vmesa->new_state |= S3V_NEW_FOG; - break; -#endif - - case GL_SCISSOR_TEST: - vmesa->new_state |= S3V_NEW_CLIP; - break; - - case GL_TEXTURE_2D: - DEBUG(("*** GL_TEXTURE_2D: %i\n", state)); - vmesa->_3d_mode = state; - vmesa->restore_primitive = -1; - break; - - default: - return; - } -} - -/* ============================================================= - * State initialization, management - */ - - -/* - * Load the current context's state into the hardware. - * - * NOTE: Be VERY careful about ensuring the context state is marked for - * upload, the only place it shouldn't be uploaded is when the setup - * state has changed in ReducedPrimitiveChange as this comes right after - * a state update. - * - * Blits of any type should always upload the context and masks after - * they are done. - */ -void s3vEmitHwState( s3vContextPtr vmesa ) -{ - if (!vmesa->driDrawable) return; - if (!vmesa->dirty) return; - - DEBUG(("**********************\n")); - DEBUG(("*** s3vEmitHwState ***\n")); - DEBUG(("**********************\n")); - - if (vmesa->dirty & S3V_UPLOAD_VIEWPORT) { - vmesa->dirty &= ~S3V_UPLOAD_VIEWPORT; - DEBUG(("S3V_UPLOAD_VIEWPORT\n")); - } - - if ( (vmesa->dirty & S3V_UPLOAD_POINTMODE) || - (vmesa->dirty & S3V_UPLOAD_LINEMODE) || - (vmesa->dirty & S3V_UPLOAD_TRIMODE) ) { - - } - - if (vmesa->dirty & S3V_UPLOAD_POINTMODE) { - vmesa->dirty &= ~S3V_UPLOAD_POINTMODE; - } - - if (vmesa->dirty & S3V_UPLOAD_LINEMODE) { - vmesa->dirty &= ~S3V_UPLOAD_LINEMODE; - } - - if (vmesa->dirty & S3V_UPLOAD_TRIMODE) { - vmesa->dirty &= ~S3V_UPLOAD_TRIMODE; - } - - if (vmesa->dirty & S3V_UPLOAD_FOG) { - GLchan c[3], col; - UNCLAMPED_FLOAT_TO_RGB_CHAN( c, vmesa->glCtx->Fog.Color ); - DEBUG(("uploading ** FOG **\n")); - col = s3vPackColor(2, c[0], c[1], c[2], 0); - vmesa->dirty &= ~S3V_UPLOAD_FOG; - } - - if (vmesa->dirty & S3V_UPLOAD_DITHER) { - vmesa->dirty &= ~S3V_UPLOAD_DITHER; - } - - if (vmesa->dirty & S3V_UPLOAD_LOGICOP) { - vmesa->dirty &= ~S3V_UPLOAD_LOGICOP; - } - - if (vmesa->dirty & S3V_UPLOAD_CLIP) { - vmesa->dirty &= ~S3V_UPLOAD_CLIP; - DEBUG(("S3V_UPLOAD_CLIP\n")); - DEBUG(("vmesa->ScissorLR: %i\n", vmesa->ScissorLR)); - DEBUG(("vmesa->ScissorTB: %i\n", vmesa->ScissorTB)); - } - - if (vmesa->dirty & S3V_UPLOAD_MASKS) { - vmesa->dirty &= ~S3V_UPLOAD_MASKS; - DEBUG(("S3V_UPLOAD_BLEND\n")); - } - - if (vmesa->dirty & S3V_UPLOAD_ALPHA) { - vmesa->dirty &= ~S3V_UPLOAD_ALPHA; - DEBUG(("S3V_UPLOAD_ALPHA\n")); - } - - if (vmesa->dirty & S3V_UPLOAD_SHADE) { - vmesa->dirty &= ~S3V_UPLOAD_SHADE; - } - - if (vmesa->dirty & S3V_UPLOAD_POLYGON) { - vmesa->dirty &= ~S3V_UPLOAD_POLYGON; - } - - if (vmesa->dirty & S3V_UPLOAD_DEPTH) { - vmesa->dirty &= ~S3V_UPLOAD_DEPTH; - DEBUG(("S3V_UPLOAD_DEPTH: DepthMode = 0x%x08\n", vmesa->DepthMode)); - } - - if (vmesa->dirty & S3V_UPLOAD_GEOMETRY) { - vmesa->dirty &= ~S3V_UPLOAD_GEOMETRY; - } - - if (vmesa->dirty & S3V_UPLOAD_TRANSFORM) { - vmesa->dirty &= ~S3V_UPLOAD_TRANSFORM; - } - - if (vmesa->dirty & S3V_UPLOAD_TEX0) { - s3vTextureObjectPtr curTex = vmesa->CurrentTexObj[0]; - vmesa->dirty &= ~S3V_UPLOAD_TEX0; - DEBUG(("S3V_UPLOAD_TEX0\n")); - if (curTex) { - DEBUG(("S3V_UPLOAD_TEX0: curTex\n")); - } else { - DEBUG(("S3V_UPLOAD_TEX0: !curTex\n")); - } - } -} - -void s3vDDUpdateHWState( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - - int new_state = vmesa->new_state; - - /* s3vUpdateClipping( ctx ); */ - - if ( new_state ) - { - - vmesa->new_state = 0; - - /* Update the various parts of the context's state. - */ - if ( new_state & S3V_NEW_ALPHA ) - s3vUpdateAlphaMode( ctx ); - - if ( new_state & S3V_NEW_DEPTH ) - s3vUpdateZMode( ctx ); - - if ( new_state & S3V_NEW_FOG ) - s3vUpdateFogAttrib( ctx ); - - if ( new_state & S3V_NEW_CLIP ) - { - DEBUG(("---> going to s3vUpdateClipping\n")); - s3vUpdateClipping( ctx ); - } - - if ( new_state & S3V_NEW_POLYGON ) - s3vUpdatePolygon( ctx ); - - if ( new_state & S3V_NEW_CULL ) - s3vUpdateCull( ctx ); - - if ( new_state & S3V_NEW_MASKS ) - s3vUpdateMasks( ctx ); - - if ( new_state & S3V_NEW_WINDOW ) - s3vUpdateWindow( ctx ); -/* - if ( new_state & S3_NEW_TEXTURE ) - s3vUpdateTextureState( ctx ); -*/ - CMDCHANGE(); - } - - /* HACK ! */ - s3vEmitHwState( vmesa ); -} - - -static void s3vDDUpdateState( GLcontext *ctx, GLuint new_state ) -{ - _swrast_InvalidateState( ctx, new_state ); - _swsetup_InvalidateState( ctx, new_state ); - _ac_InvalidateState( ctx, new_state ); - _tnl_InvalidateState( ctx, new_state ); - S3V_CONTEXT(ctx)->new_gl_state |= new_state; -} - - -/* Initialize the context's hardware state. - */ -void s3vInitState( s3vContextPtr vmesa ) -{ - vmesa->new_state = 0; -} - -/* Initialize the driver's state functions. - */ -void s3vInitStateFuncs( GLcontext *ctx ) -{ - ctx->Driver.UpdateState = s3vDDUpdateState; - - ctx->Driver.Clear = s3vDDClear; - ctx->Driver.ClearIndex = NULL; - ctx->Driver.ClearColor = s3vDDClearColor; - ctx->Driver.DrawBuffer = s3vDDSetDrawBuffer; - ctx->Driver.ReadBuffer = NULL; /* XXX */ - - ctx->Driver.IndexMask = NULL; - ctx->Driver.ColorMask = NULL; /* s3vDDColorMask; */ /* FIXME */ - - ctx->Driver.AlphaFunc = s3vDDAlphaFunc; /* FIXME */ -#if 0 - ctx->Driver.BlendEquation = NULL; /* s3vDDBlendEquation; */ - ctx->Driver.BlendFunc = s3vDDBlendFunc; /* FIXME */ -#endif - ctx->Driver.BlendFuncSeparate = NULL; /* s3vDDBlendFuncSeparate; */ - ctx->Driver.ClearDepth = s3vDDClearDepth; - ctx->Driver.CullFace = s3vDDCullFace; - ctx->Driver.FrontFace = s3vDDFrontFace; - ctx->Driver.DepthFunc = s3vDDDepthFunc; /* FIXME */ - ctx->Driver.DepthMask = s3vDDDepthMask; /* FIXME */ - ctx->Driver.DepthRange = NULL; /* s3vDDDepthRange; */ - ctx->Driver.Enable = s3vDDEnable; /* FIXME */ - ctx->Driver.Finish = s3vDDFinish; - ctx->Driver.Flush = s3vDDFlush; -#if 1 - ctx->Driver.Fogfv = NULL; /* s3vDDFogfv; */ -#endif - ctx->Driver.Hint = NULL; - ctx->Driver.LineWidth = NULL; /* s3vDDLineWidth; */ - ctx->Driver.LineStipple = NULL; /* s3vDDLineStipple; */ -#if ENABLELIGHTING - ctx->Driver.Lightfv = NULL; /* s3vDDLightfv; */ - - ctx->Driver.LightModelfv = NULL; /* s3vDDLightModelfv; */ -#endif - ctx->Driver.LogicOpcode = NULL; /* s3vDDLogicalOpcode; */ - ctx->Driver.PointSize = NULL; /* s3vDDPointSize; */ - ctx->Driver.PolygonMode = NULL; /* s3vDDPolygonMode; */ - ctx->Driver.PolygonStipple = NULL; /* s3vDDPolygonStipple; */ - ctx->Driver.Scissor = s3vDDScissor; /* ScissorLR / ScissorTB */ - ctx->Driver.ShadeModel = NULL; /* s3vDDShadeModel; */ - ctx->Driver.ClearStencil = NULL; - ctx->Driver.StencilFunc = NULL; - ctx->Driver.StencilMask = NULL; - ctx->Driver.StencilOp = NULL; - ctx->Driver.Viewport = NULL; /* s3vDDViewport; */ -} diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_tex.c b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_tex.c deleted file mode 100644 index 5bee051b0..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_tex.c +++ /dev/null @@ -1,554 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#include <stdlib.h> -#include <stdio.h> - -#include "glheader.h" -#include "mtypes.h" -#include "simple_list.h" -#include "enums.h" -#include "texstore.h" -#include "texformat.h" -#include "teximage.h" -#include "swrast/swrast.h" - -#include "mm.h" -#include "s3v_context.h" -#include "s3v_tex.h" - - -extern void s3vSwapOutTexObj(s3vContextPtr vmesa, s3vTextureObjectPtr t); -extern void s3vDestroyTexObj(s3vContextPtr vmesa, s3vTextureObjectPtr t); - -/* -static GLuint s3vComputeLodBias(GLfloat bias) -{ -#if TEX_DEBUG_ON - DEBUG_TEX(("*** s3vComputeLodBias ***\n")); -#endif - return bias; -} -*/ - -static void s3vSetTexWrapping(s3vContextPtr vmesa, - s3vTextureObjectPtr t, - GLenum wraps, GLenum wrapt) -{ - GLuint t0 = t->TextureCMD; - GLuint cmd = vmesa->CMD; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vSetTexWrapping: #%i ***\n", ++times)); -#endif - - - t0 &= ~TEX_WRAP_MASK; - cmd &= ~TEX_WRAP_MASK; - - if ((wraps != GL_CLAMP) || (wrapt != GL_CLAMP)) { - DEBUG(("TEX_WRAP_ON\n")); - t0 |= TEX_WRAP_ON; - cmd |= TEX_WRAP_ON; - } - - cmd |= TEX_WRAP_ON; /* FIXME: broken if off */ - t->TextureCMD = t0; - vmesa->CMD = cmd; -} - - -static void s3vSetTexFilter(s3vContextPtr vmesa, - s3vTextureObjectPtr t, - GLenum minf, GLenum magf) -{ - GLuint t0 = t->TextureCMD; - GLuint cmd = vmesa->CMD; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vSetTexFilter: #%i ***\n", ++times)); -#endif - - t0 &= ~TEX_FILTER_MASK; - cmd &= ~TEX_FILTER_MASK; - - switch (minf) { - case GL_NEAREST: - DEBUG(("GL_NEAREST\n")); - t0 |= NEAREST; - cmd |= NEAREST; - break; - case GL_LINEAR: - DEBUG(("GL_LINEAR\n")); - t0 |= LINEAR; - cmd |= LINEAR; - break; - case GL_NEAREST_MIPMAP_NEAREST: - DEBUG(("GL_MIPMAP_NEAREST\n")); - t0 |= MIP_NEAREST; - cmd |= MIP_NEAREST; - break; - case GL_LINEAR_MIPMAP_NEAREST: - DEBUG(("GL_LINEAR_MIPMAP_NEAREST\n")); - t0 |= LINEAR_MIP_NEAREST; - cmd |= LINEAR_MIP_NEAREST; - break; - case GL_NEAREST_MIPMAP_LINEAR: - DEBUG(("GL_NEAREST_MIPMAP_LINEAR\n")); - t0 |= MIP_LINEAR; - cmd |= MIP_LINEAR; - break; - case GL_LINEAR_MIPMAP_LINEAR: - DEBUG(("GL_LINEAR_MIPMAP_LINEAR\n")); - t0 |= LINEAR_MIP_LINEAR; - cmd |= LINEAR_MIP_LINEAR; - break; - default: - break; - } - /* FIXME: bilinear? */ - -#if 0 - switch (magf) { - case GL_NEAREST: - break; - case GL_LINEAR: - break; - default: - break; - } -#endif - - t->TextureCMD = t0; - - DEBUG(("CMD was = 0x%x\n", vmesa->CMD)); - DEBUG(("CMD is = 0x%x\n", cmd)); - - vmesa->CMD = cmd; - /* CMDCHANGE(); */ -} - - -static void s3vSetTexBorderColor(s3vContextPtr vmesa, - s3vTextureObjectPtr t, - GLubyte color[4]) -{ -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vSetTexBorderColor: #%i ***\n", ++times)); -#endif - - /*FIXME: it should depend on tex col format */ - /* switch(t0 ... t->TextureColorMode) */ - - /* case TEX_COL_ARGB1555: */ - t->TextureBorderColor = - S3VIRGEPACKCOLOR555(color[0], color[1], color[2], color[3]); - - DEBUG(("TextureBorderColor = 0x%x\n", t->TextureBorderColor)); - - vmesa->TextureBorderColor = t->TextureBorderColor; -} - -static void s3vTexParameter( GLcontext *ctx, GLenum target, - struct gl_texture_object *tObj, - GLenum pname, const GLfloat *params ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - s3vTextureObjectPtr t = (s3vTextureObjectPtr) tObj->DriverData; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vTexParameter: #%i ***\n", ++times)); -#endif - - if (!t) return; - - /* Can't do the update now as we don't know whether to flush - * vertices or not. Setting vmesa->new_state means that - * s3vUpdateTextureState() will be called before any triangles are - * rendered. If a statechange has occurred, it will be detected at - * that point, and buffered vertices flushed. - */ - switch (pname) { - case GL_TEXTURE_MIN_FILTER: - case GL_TEXTURE_MAG_FILTER: - s3vSetTexFilter( vmesa, t, tObj->MinFilter, tObj->MagFilter ); - break; - - case GL_TEXTURE_WRAP_S: - case GL_TEXTURE_WRAP_T: - s3vSetTexWrapping( vmesa, t, tObj->WrapS, tObj->WrapT ); - break; - - case GL_TEXTURE_BORDER_COLOR: - s3vSetTexBorderColor( vmesa, t, tObj->_BorderChan ); - break; - - case GL_TEXTURE_BASE_LEVEL: - case GL_TEXTURE_MAX_LEVEL: - case GL_TEXTURE_MIN_LOD: - case GL_TEXTURE_MAX_LOD: - /* This isn't the most efficient solution but there doesn't appear to - * be a nice alternative for Virge. Since there's no LOD clamping, - * we just have to rely on loading the right subset of mipmap levels - * to simulate a clamped LOD. - */ - s3vSwapOutTexObj( vmesa, t ); - break; - - default: - return; - } - - if (t == vmesa->CurrentTexObj[0]) - vmesa->dirty |= S3V_UPLOAD_TEX0; - -#if 0 - if (t == vmesa->CurrentTexObj[1]) { - vmesa->dirty |= S3V_UPLOAD_TEX1; - } -#endif -} - - -static void s3vTexEnv( GLcontext *ctx, GLenum target, - GLenum pname, const GLfloat *param ) -{ - s3vContextPtr vmesa = S3V_CONTEXT( ctx ); - GLuint unit = ctx->Texture.CurrentUnit; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vTexEnv: #%i ***\n", ++times)); -#endif - - /* Only one env color. Need a fallback if env colors are different - * and texture setup references env color in both units. - */ - switch (pname) { - case GL_TEXTURE_ENV_COLOR: { - struct gl_texture_unit *texUnit = &ctx->Texture.Unit[unit]; - GLfloat *fc = texUnit->EnvColor; - GLuint r, g, b, a, col; - CLAMPED_FLOAT_TO_UBYTE(r, fc[0]); - CLAMPED_FLOAT_TO_UBYTE(g, fc[1]); - CLAMPED_FLOAT_TO_UBYTE(b, fc[2]); - CLAMPED_FLOAT_TO_UBYTE(a, fc[3]); - - col = ((a << 24) | - (r << 16) | - (g << 8) | - (b << 0)); - - break; - } - case GL_TEXTURE_ENV_MODE: - vmesa->TexEnvImageFmt[unit] = 0; /* force recalc of env state */ - break; - case GL_TEXTURE_LOD_BIAS_EXT: { -/* - struct gl_texture_object *tObj = - ctx->Texture.Unit[unit]._Current; - - s3vTextureObjectPtr t = (s3vTextureObjectPtr) tObj->DriverData; -*/ - break; - } - default: - break; - } -} - -static void s3vTexImage1D( GLcontext *ctx, GLenum target, GLint level, - GLint internalFormat, - GLint width, GLint border, - GLenum format, GLenum type, - const GLvoid *pixels, - const struct gl_pixelstore_attrib *pack, - struct gl_texture_object *texObj, - struct gl_texture_image *texImage ) -{ - s3vContextPtr vmesa = S3V_CONTEXT( ctx ); - s3vTextureObjectPtr t = (s3vTextureObjectPtr) texObj->DriverData; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vTexImage1D: #%i ***\n", ++times)); -#endif - -#if 1 - if (t) { -#if _TEXFLUSH - DMAFLUSH(); -#endif - s3vSwapOutTexObj( vmesa, t ); -/* - s3vDestroyTexObj( vmesa, t ); - texObj->DriverData = 0; -*/ - } -#endif - _mesa_store_teximage1d( ctx, target, level, internalFormat, - width, border, format, type, - pixels, pack, texObj, texImage ); -} - -static void s3vTexSubImage1D( GLcontext *ctx, - GLenum target, - GLint level, - GLint xoffset, - GLsizei width, - GLenum format, GLenum type, - const GLvoid *pixels, - const struct gl_pixelstore_attrib *pack, - struct gl_texture_object *texObj, - struct gl_texture_image *texImage ) -{ - s3vContextPtr vmesa = S3V_CONTEXT( ctx ); - s3vTextureObjectPtr t = (s3vTextureObjectPtr) texObj->DriverData; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vTexSubImage1D: #%i ***\n", ++times)); -#endif - -#if 1 - if (t) { -#if _TEXFLUSH - DMAFLUSH(); -#endif - s3vSwapOutTexObj( vmesa, t ); -/* - s3vDestroyTexObj( vmesa, t ); - texObj->DriverData = 0; -*/ - } -#endif - _mesa_store_texsubimage1d(ctx, target, level, xoffset, width, - format, type, pixels, pack, texObj, - texImage); -} - -static void s3vTexImage2D( GLcontext *ctx, GLenum target, GLint level, - GLint internalFormat, - GLint width, GLint height, GLint border, - GLenum format, GLenum type, const GLvoid *pixels, - const struct gl_pixelstore_attrib *packing, - struct gl_texture_object *texObj, - struct gl_texture_image *texImage ) -{ - s3vContextPtr vmesa = S3V_CONTEXT( ctx ); - s3vTextureObjectPtr t = (s3vTextureObjectPtr) texObj->DriverData; - -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vTexImage2D: #%i ***\n", ++times)); -#endif - -#if 1 - if (t) { -#if _TEXFLUSH - DMAFLUSH(); -#endif - s3vSwapOutTexObj( vmesa, t ); -/* - s3vDestroyTexObj( vmesa, t ); - texObj->DriverData = 0; -*/ - } -#endif - _mesa_store_teximage2d( ctx, target, level, internalFormat, - width, height, border, format, type, - pixels, packing, texObj, texImage ); -} - -static void s3vTexSubImage2D( GLcontext *ctx, - GLenum target, - GLint level, - GLint xoffset, GLint yoffset, - GLsizei width, GLsizei height, - GLenum format, GLenum type, - const GLvoid *pixels, - const struct gl_pixelstore_attrib *packing, - struct gl_texture_object *texObj, - struct gl_texture_image *texImage ) -{ - s3vContextPtr vmesa = S3V_CONTEXT( ctx ); - s3vTextureObjectPtr t = (s3vTextureObjectPtr) texObj->DriverData; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vTexSubImage2D: #%i ***\n", ++times)); -#endif - -#if 1 - if (t) { -#if _TEXFLUSH - DMAFLUSH(); -#endif - s3vSwapOutTexObj( vmesa, t ); -/* - s3vDestroyTexObj( vmesa, t ); - texObj->DriverData = 0; -*/ - } -#endif - _mesa_store_texsubimage2d(ctx, target, level, xoffset, yoffset, width, - height, format, type, pixels, packing, texObj, - texImage); -} - - -static void s3vBindTexture( GLcontext *ctx, GLenum target, - struct gl_texture_object *tObj ) -{ - s3vContextPtr vmesa = S3V_CONTEXT( ctx ); - s3vTextureObjectPtr t = (s3vTextureObjectPtr) tObj->DriverData; - GLuint cmd = vmesa->CMD; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vBindTexture: #%i ***\n", ++times)); -#endif - - if (!t) { -/* - GLfloat bias = ctx->Texture.Unit[ctx->Texture.CurrentUnit].LodBias; -*/ - t = CALLOC_STRUCT(s3v_texture_object_t); - - /* Initialize non-image-dependent parts of the state: - */ - t->globj = tObj; -#if 0 - if (target == GL_TEXTURE_2D) { - } else - if (target == GL_TEXTURE_1D) { - } - -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - t->TextureFormat = (TF_LittleEndian | -#else - t->TextureFormat = (TF_BigEndian | -#endif -#endif - t->dirty_images = ~0; - - tObj->DriverData = t; - make_empty_list( t ); -#if 0 - s3vSetTexWrapping( vmesa, t, tObj->WrapS, tObj->WrapT ); - s3vSetTexFilter( vmesa, t, tObj->MinFilter, tObj->MagFilter ); - s3vSetTexBorderColor( vmesa, t, tObj->BorderColor ); -#endif - } - - cmd = vmesa->CMD & ~MIP_MASK; - vmesa->dirty |= S3V_UPLOAD_TEX0; - vmesa->TexOffset = t->TextureBaseAddr[tObj->BaseLevel]; - vmesa->TexStride = t->Pitch; - cmd |= MIPMAP_LEVEL(t->WidthLog2); - vmesa->CMD = cmd; - vmesa->restore_primitive = -1; -#if 0 - printf("t->TextureBaseAddr[0] = 0x%x\n", t->TextureBaseAddr[0]); - printf("t->TextureBaseAddr[1] = 0x%x\n", t->TextureBaseAddr[1]); - printf("t->TextureBaseAddr[2] = 0x%x\n", t->TextureBaseAddr[2]); -#endif -} - - -static void s3vDeleteTexture( GLcontext *ctx, struct gl_texture_object *tObj ) -{ - s3vTextureObjectPtr t = (s3vTextureObjectPtr)tObj->DriverData; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vDeleteTexture: #%i ***\n", ++times)); -#endif - - if (t) { - s3vContextPtr vmesa = S3V_CONTEXT( ctx ); - -#if _TEXFLUSH - if (vmesa) { - DMAFLUSH(); - } -#endif - - s3vDestroyTexObj( vmesa, t ); - tObj->DriverData = 0; - - } -} - -static GLboolean s3vIsTextureResident( GLcontext *ctx, - struct gl_texture_object *tObj ) -{ - s3vTextureObjectPtr t = (s3vTextureObjectPtr)tObj->DriverData; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vIsTextureResident: #%i ***\n", ++times)); -#endif - - return (t && t->MemBlock); -} - -static void s3vInitTextureObjects( GLcontext *ctx ) -{ - /* s3vContextPtr vmesa = S3V_CONTEXT(ctx); */ - struct gl_texture_object *texObj; - GLuint tmp = ctx->Texture.CurrentUnit; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vInitTextureObjects: #%i ***\n", ++times)); -#endif - -#if 1 - ctx->Texture.CurrentUnit = 0; - - texObj = ctx->Texture.Unit[0].Current1D; - s3vBindTexture( ctx, GL_TEXTURE_1D, texObj ); - - texObj = ctx->Texture.Unit[0].Current2D; - s3vBindTexture( ctx, GL_TEXTURE_2D, texObj ); -#endif - -#if 0 - ctx->Texture.CurrentUnit = 1; - - texObj = ctx->Texture.Unit[1].Current1D; - s3vBindTexture( ctx, GL_TEXTURE_1D, texObj ); - - texObj = ctx->Texture.Unit[1].Current2D; - s3vBindTexture( ctx, GL_TEXTURE_2D, texObj ); -#endif - - ctx->Texture.CurrentUnit = tmp; -} - - -void s3vInitTextureFuncs( GLcontext *ctx ) -{ -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vInitTextureFuncs: #%i ***\n", ++times)); -#endif - - ctx->Driver.TexEnv = s3vTexEnv; - ctx->Driver.ChooseTextureFormat = _mesa_choose_tex_format; - ctx->Driver.TexImage1D = _mesa_store_teximage1d; - ctx->Driver.TexImage2D = s3vTexImage2D; - ctx->Driver.TexImage3D = _mesa_store_teximage3d; - ctx->Driver.TexSubImage1D = _mesa_store_texsubimage1d; - ctx->Driver.TexSubImage2D = s3vTexSubImage2D; - ctx->Driver.TexSubImage3D = _mesa_store_texsubimage3d; - ctx->Driver.CopyTexImage1D = _swrast_copy_teximage1d; - ctx->Driver.CopyTexImage2D = _swrast_copy_teximage2d; - ctx->Driver.CopyTexSubImage1D = _swrast_copy_texsubimage1d; - ctx->Driver.CopyTexSubImage2D = _swrast_copy_texsubimage2d; - ctx->Driver.CopyTexSubImage3D = _swrast_copy_texsubimage3d; - ctx->Driver.BindTexture = s3vBindTexture; - ctx->Driver.DeleteTexture = s3vDeleteTexture; - ctx->Driver.TexParameter = s3vTexParameter; - ctx->Driver.UpdateTexturePalette = 0; - ctx->Driver.IsTextureResident = s3vIsTextureResident; - ctx->Driver.TestProxyTexImage = _mesa_test_proxy_teximage; - - s3vInitTextureObjects( ctx ); -} diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_tex.h b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_tex.h deleted file mode 100644 index a823fe245..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_tex.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#ifndef _S3V_TEX_H -#define _S3V_TEX_H - -#define TEX_DEBUG_ON 0 - -extern void s3vUpdateTexLRU( s3vContextPtr vmesa, s3vTextureObjectPtr t ); - -#if TEX_DEBUG_ON -#define DEBUG_TEX(str) printf str -#else -#define DEBUG_TEX(str) /* str */ -#endif - -#define _TEXFLUSH 1 /* flush before uploading */ -#define _TEXLOCK 1 /* lock before writing new texures to card mem */ - /* if you turn it on you will gain stability and image - quality, but you will loose performance (~10%) */ -#define _TEXFALLBACK 0 /* fallback to software for -big- textures (slow) */ - /* turning this off, you will lose some tex (e.g. mountains - on tuxracer) but you will increase average playability */ - -#define _TEXALIGN 0x00000007 - -#endif diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_texmem.c b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_texmem.c deleted file mode 100644 index 0ce3ff5fc..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_texmem.c +++ /dev/null @@ -1,582 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#include <stdlib.h> -#include <stdio.h> - -#include "glheader.h" -#include "macros.h" -#include "mtypes.h" -#include "simple_list.h" -#include "enums.h" - -#include "mm.h" -#include "s3v_context.h" -#include "s3v_lock.h" -#include "s3v_tex.h" - -void s3vSwapOutTexObj(s3vContextPtr vmesa, s3vTextureObjectPtr t); -void s3vUpdateTexLRU( s3vContextPtr vmesa, s3vTextureObjectPtr t ); - - -void s3vDestroyTexObj(s3vContextPtr vmesa, s3vTextureObjectPtr t) -{ -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vDestroyTexObj: #%i ***\n", ++times)); -#endif - - if (!t) return; - -/* FIXME: useful? */ -#if _TEXFLUSH - if (vmesa) - DMAFLUSH(); -#endif - - /* This is sad - need to sync *in case* we upload a texture - * to this newly free memory... - */ - if (t->MemBlock) { - mmFreeMem(t->MemBlock); - t->MemBlock = 0; - - if (vmesa && t->age > vmesa->dirtyAge) - vmesa->dirtyAge = t->age; - } - - if (t->globj) - t->globj->DriverData = NULL; - - if (vmesa) { - if (vmesa->CurrentTexObj[0] == t) { - vmesa->CurrentTexObj[0] = 0; - vmesa->dirty &= ~S3V_UPLOAD_TEX0; - } - -#if 0 - if (vmesa->CurrentTexObj[1] == t) { - vmesa->CurrentTexObj[1] = 0; - vmesa->dirty &= ~S3V_UPLOAD_TEX1; - } -#endif - } - - remove_from_list(t); - FREE(t); -} - - -void s3vSwapOutTexObj(s3vContextPtr vmesa, s3vTextureObjectPtr t) -{ -/* int i; */ -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vSwapOutTexObj: #%i ***\n", ++times)); -#endif - - if (t->MemBlock) { - - mmFreeMem(t->MemBlock); - t->MemBlock = 0; - - if (t->age > vmesa->dirtyAge) - vmesa->dirtyAge = t->age; - - t->dirty_images = ~0; - move_to_tail(&(vmesa->SwappedOut), t); - } -} - - -/* Upload an image from mesa's internal copy. - */ - -static void s3vUploadTexLevel( s3vContextPtr vmesa, s3vTextureObjectPtr t, - int level ) -{ - __DRIscreenPrivate *sPriv = vmesa->driScreen; - const struct gl_texture_image *image = t->image[level].image; - int i,j; - int l2d; - /* int offset = 0; */ - int words; - GLuint* dest; -#if TEX_DEBUG_ON - static unsigned int times=0; -#endif - if ( !image ) return; - if (image->Data == 0) return; - - DEBUG_TEX(("*** s3vUploadTexLevel: #%i ***\n", ++times)); - DEBUG_TEX(("level = %i\n", level)); - - l2d = 5; /* 32bits per texel == 1<<5 */ -/* - if (level == 0) - ; -*/ - DEBUG_TEX(("t->image[%i].offset = 0x%x\n", - level, t->image[level].offset)); - - t->TextureBaseAddr[level] = (GLuint)(t->BufAddr + t->image[level].offset - + _TEXALIGN) & (GLuint)(~_TEXALIGN); - dest = (GLuint*)(sPriv->pFB + t->TextureBaseAddr[level]); - - DEBUG_TEX(("sPriv->pFB = 0x%x\n", sPriv->pFB)); - DEBUG_TEX(("dest = 0x%x\n", dest)); - DEBUG_TEX(("dest - sPriv->pFB = 0x%x\n", ((int)dest - (int)sPriv->pFB))); - - /* NOTE: we implicitly suppose t->texelBytes == 2 */ - - words = (image->Width * image->Height) >> 1; - - DEBUG_TEX(("\n\n")); - - switch (t->image[level].internalFormat) { - case GL_RGB: - case 3: - { - GLubyte *src = (GLubyte *)image->Data; - - DEBUG_TEX(("GL_RGB:\n")); -/* - if (level == 0) - ; -*/ - /* The UGLY way, and SLOW : use DMA FIXME ! */ - - for (i = 0; i < words; i++) { - unsigned int data; - /* data = PACK_COLOR_565(src[0],src[1],src[2]); */ - data = S3VIRGEPACKCOLOR555(src[0],src[1],src[2],255) - |(S3VIRGEPACKCOLOR555(src[3],src[4],src[5],255)<<16); - - *dest++ = data; - /* src += 3; */ - src +=6; - } - } - break; - - case GL_RGBA: - case 4: - { - GLubyte *src = (GLubyte *)image->Data; - - DEBUG_TEX(("GL_RGBA:\n")); -/* - if (level == 0) - ; -*/ - for (i = 0; i < words; i++) { - unsigned int data; - - /* data = PACK_COLOR_8888(src[0],src[1],src[2],src[3]); */ - data = S3VIRGEPACKCOLOR4444(src[0], src[1],src[2], src[3]) - | (S3VIRGEPACKCOLOR4444(src[4], src[5], src[6], src[7]) << 16); - - *dest++ = data; - /* src += 4; */ - src += 8; - } - } - break; - - case GL_LUMINANCE: - { - GLubyte *src = (GLubyte *)image->Data; - - DEBUG_TEX(("GL_LUMINANCE:\n")); -/* - if (level == 0) - ; -*/ - for (i = 0; i < words; i++) { - unsigned int data; - - /* data = PACK_COLOR_888(src[0],src[0],src[0]); */ - data = S3VIRGEPACKCOLOR4444(src[0],src[0],src[0],src[0]) - | (S3VIRGEPACKCOLOR4444(src[1],src[1],src[1],src[1]) << 16); - - *dest++ = data; - /* src ++; */ - src +=2; - } - } - break; - - case GL_INTENSITY: - { - GLubyte *src = (GLubyte *)image->Data; - - DEBUG_TEX(("GL_INTENSITY:\n")); -/* - if (level == 0) - ; -*/ - for (i = 0; i < words; i++) { - unsigned int data; - - /* data = PACK_COLOR_8888(src[0],src[0],src[0],src[0]); */ - data = S3VIRGEPACKCOLOR4444(src[0],src[0],src[0],src[0]) - | (S3VIRGEPACKCOLOR4444(src[1],src[1],src[1],src[1]) << 16); - - *dest++ = data; - /* src ++; */ - src += 2; - } - } - break; - - case GL_LUMINANCE_ALPHA: - { - GLubyte *src = (GLubyte *)image->Data; - - DEBUG_TEX(("GL_LUMINANCE_ALPHA:\n")); -/* - if (level == 0) - ; -*/ - for (i = 0; i < words; i++) { - unsigned int data; - - /* data = PACK_COLOR_8888(src[0],src[0],src[0],src[1]); */ - data = S3VIRGEPACKCOLOR4444(src[0],src[0],src[0],src[1]) - | (S3VIRGEPACKCOLOR4444(src[2],src[2],src[2],src[3]) << 16); - - *dest++ = data; - /* src += 2; */ - src += 4; - } - } - break; - - case GL_ALPHA: - { - GLubyte *src = (GLubyte *)image->Data; - - DEBUG_TEX(("GL_ALPHA:\n")); -/* - if (level == 0) - ; -*/ - for (i = 0; i < words; i++) { - unsigned int data; - - /* data = PACK_COLOR_8888(255,255,255,src[0]); */ - data = S3VIRGEPACKCOLOR4444(255,255,255,src[0]) - | (S3VIRGEPACKCOLOR4444(255,255,255,src[1]) << 16); - - *dest++ = data; - /* src += 1; */ - src += 2; - } - } - break; - - /* TODO: Translate color indices *now*: - */ - case GL_COLOR_INDEX: - { - - GLubyte *dst = (GLubyte *)(t->BufAddr + t->image[level].offset); - GLubyte *src = (GLubyte *)image->Data; - - DEBUG_TEX(("GL_COLOR_INDEX:\n")); - - for (j = 0 ; j < image->Height ; j++, dst += t->Pitch) { - for (i = 0 ; i < image->Width ; i++) { - dst[i] = src[0]; - src += 1; - } - } - } - break; - - default: - fprintf(stderr, "Not supported texture format %s\n", - _mesa_lookup_enum_by_nr(image->Format)); - } - - DEBUG_TEX(("words = %i\n\n", words)); -} - -void s3vPrintLocalLRU( s3vContextPtr vmesa ) -{ - s3vTextureObjectPtr t; - int sz = 1 << (vmesa->s3vScreen->logTextureGranularity); - -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vPrintLocalLRU: #%i ***\n", ++times)); -#endif - - foreach( t, &vmesa->TexObjList ) { - if (!t->globj) - fprintf(stderr, "Placeholder %d at %x sz %x\n", - t->MemBlock->ofs / sz, - t->MemBlock->ofs, - t->MemBlock->size); - else - fprintf(stderr, "Texture at %x sz %x\n", - t->MemBlock->ofs, - t->MemBlock->size); - - } -} - -void s3vPrintGlobalLRU( s3vContextPtr vmesa ) -{ - int i, j; - S3VTexRegionPtr list = vmesa->sarea->texList; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vPrintGlobalLRU: #%i ***\n", ++times)); -#endif - - for (i = 0, j = S3V_NR_TEX_REGIONS ; i < S3V_NR_TEX_REGIONS ; i++) { - fprintf(stderr, "list[%d] age %d next %d prev %d\n", - j, list[j].age, list[j].next, list[j].prev); - j = list[j].next; - if (j == S3V_NR_TEX_REGIONS) break; - } - - if (j != S3V_NR_TEX_REGIONS) - fprintf(stderr, "Loop detected in global LRU\n"); -} - - -void s3vResetGlobalLRU( s3vContextPtr vmesa ) -{ - S3VTexRegionPtr list = vmesa->sarea->texList; - int sz = 1 << vmesa->s3vScreen->logTextureGranularity; - int i; - -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vResetGlobalLRU: #%i ***\n", ++times)); -#endif - - /* (Re)initialize the global circular LRU list. The last element - * in the array (S3V_NR_TEX_REGIONS) is the sentinal. Keeping it - * at the end of the array allows it to be addressed rationally - * when looking up objects at a particular location in texture - * memory. - */ - for (i = 0 ; (i+1) * sz <= vmesa->s3vScreen->textureSize ; i++) { - list[i].prev = i-1; - list[i].next = i+1; - list[i].age = 0; - } - - i--; - list[0].prev = S3V_NR_TEX_REGIONS; - list[i].prev = i-1; - list[i].next = S3V_NR_TEX_REGIONS; - list[S3V_NR_TEX_REGIONS].prev = i; - list[S3V_NR_TEX_REGIONS].next = 0; - vmesa->sarea->texAge = 0; -} - - -void s3vUpdateTexLRU( s3vContextPtr vmesa, s3vTextureObjectPtr t ) -{ -/* - int i; - int logsz = vmesa->s3vScreen->logTextureGranularity; - int start = t->MemBlock->ofs >> logsz; - int end = (t->MemBlock->ofs + t->MemBlock->size - 1) >> logsz; - S3VTexRegionPtr list = vmesa->sarea->texList; -*/ - -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vUpdateTexLRU: #%i ***\n", ++times)); -#endif - - vmesa->texAge = ++vmesa->sarea->texAge; - - /* Update our local LRU - */ - move_to_head( &(vmesa->TexObjList), t ); - - /* Update the global LRU - */ -#if 0 - for (i = start ; i <= end ; i++) { - - list[i].in_use = 1; - list[i].age = vmesa->texAge; - - /* remove_from_list(i) - */ - list[(unsigned)list[i].next].prev = list[i].prev; - list[(unsigned)list[i].prev].next = list[i].next; - - /* insert_at_head(list, i) - */ - list[i].prev = S3V_NR_TEX_REGIONS; - list[i].next = list[S3V_NR_TEX_REGIONS].next; - list[(unsigned)list[S3V_NR_TEX_REGIONS].next].prev = i; - list[S3V_NR_TEX_REGIONS].next = i; - } -#endif -} - - -/* Called for every shared texture region which has increased in age - * since we last held the lock. - * - * Figures out which of our textures have been ejected by other clients, - * and pushes a placeholder texture onto the LRU list to represent - * the other client's textures. - */ -void s3vTexturesGone( s3vContextPtr vmesa, - GLuint offset, - GLuint size, - GLuint in_use ) -{ - s3vTextureObjectPtr t, tmp; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vTexturesGone: #%i ***\n", ++times)); -#endif - - foreach_s ( t, tmp, &vmesa->TexObjList ) { - - if (t->MemBlock->ofs >= offset + size || - t->MemBlock->ofs + t->MemBlock->size <= offset) - continue; - - /* It overlaps - kick it off. Need to hold onto the currently bound - * objects, however. - */ - s3vSwapOutTexObj( vmesa, t ); - } - - if (in_use) { - t = (s3vTextureObjectPtr) calloc(1,sizeof(*t)); - if (!t) return; - - t->MemBlock = mmAllocMem( vmesa->texHeap, size, 0, offset); - insert_at_head( &vmesa->TexObjList, t ); - } - - /* Reload any lost textures referenced by current vertex buffer. - */ -#if 0 - if (vmesa->vertex_buffer) { - int i, j; - - fprintf(stderr, "\n\nreload tex\n"); - - for (i = 0 ; i < vmesa->statenr ; i++) { - for (j = 0 ; j < 2 ; j++) { - s3vTextureObjectPtr t = vmesa->state_tex[j][i]; - if (t) { - if (t->MemBlock == 0) - s3vUploadTexImages( vmesa, t ); - } - } - } - - /* Hard to do this with the lock held: - */ - /* S3V_FIREVERTICES( vmesa ); */ - } -#endif -} - - -/* This is called with the lock held. May have to eject our own and/or - * other client's texture objects to make room for the upload. - */ -void s3vUploadTexImages( s3vContextPtr vmesa, s3vTextureObjectPtr t ) -{ - int i; - int ofs; - int numLevels; -#if TEX_DEBUG_ON - static unsigned int times=0; - static unsigned int try=0; - - DEBUG_TEX(("*** s3vUploadTexImages: #%i ***\n", ++times)); - DEBUG_TEX(("vmesa->texHeap = 0x%x; t->totalSize = %i\n", - (unsigned int)vmesa->texHeap, t->totalSize)); -#endif - - /* Do we need to eject LRU texture objects? - */ - if (!t->MemBlock) { - - while (1) - { - /* int try = 0; */ - DEBUG_TEX(("trying to alloc mem for tex (try %i)\n", ++try)); - - t->MemBlock = mmAllocMem( vmesa->texHeap, t->totalSize, 12, 0 ); - - if (t->MemBlock) - break; - - if (vmesa->TexObjList.prev == vmesa->CurrentTexObj[0]) { -/* || vmesa->TexObjList.prev == vmesa->CurrentTexObj[1]) { - fprintf(stderr, "Hit bound texture in upload\n"); - s3vPrintLocalLRU( vmesa ); */ - return; - } - - if (vmesa->TexObjList.prev == &(vmesa->TexObjList)) { -/* fprintf(stderr, "Failed to upload texture, sz %d\n", - t->totalSize); - mmDumpMemInfo( vmesa->texHeap ); */ - return; - } - - DEBUG_TEX(("swapping out: %p\n", vmesa->TexObjList.prev)); - s3vSwapOutTexObj( vmesa, vmesa->TexObjList.prev ); - } - - ofs = t->MemBlock->ofs; - - t->BufAddr = vmesa->s3vScreen->texOffset + ofs; - - DEBUG_TEX(("ofs = 0x%x\n", ofs)); - DEBUG_TEX(("t->BufAddr = 0x%x\n", t->BufAddr)); - -/* FIXME: check if we need it */ -#if 0 - if (t == vmesa->CurrentTexObj[0]) { - vmesa->dirty |= S3V_UPLOAD_TEX0; - vmesa->restore_primitive = -1; - } -#endif - -#if 0 - if (t == vmesa->CurrentTexObj[1]) - vmesa->dirty |= S3V_UPLOAD_TEX1; -#endif - - s3vUpdateTexLRU( vmesa, t ); - } - -#if 0 - if (vmesa->dirtyAge >= GET_DISPATCH_AGE(vmesa)) - s3vWaitAgeLocked( vmesa, vmesa->dirtyAge ); -#endif - -#if _TEXLOCK - S3V_SIMPLE_FLUSH_LOCK(vmesa); -#endif - numLevels = t->lastLevel - t->firstLevel + 1; - for (i = 0 ; i < numLevels ; i++) - if (t->dirty_images & (1<<i)) - s3vUploadTexLevel( vmesa, t, i ); - - t->dirty_images = 0; -#if _TEXLOCK - S3V_SIMPLE_UNLOCK(vmesa); -#endif -} diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_texstate.c b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_texstate.c deleted file mode 100644 index b136c9d37..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_texstate.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#include <stdlib.h> -#include <stdio.h> - -#include "glheader.h" -#include "macros.h" -#include "mtypes.h" -#include "simple_list.h" -#include "enums.h" - -#include "mm.h" -#include "s3v_context.h" -#include "s3v_tex.h" - - -static void s3vSetTexImages( s3vContextPtr vmesa, - struct gl_texture_object *tObj ) -{ - GLuint height, width, pitch, i, /*textureFormat,*/ log_pitch; - s3vTextureObjectPtr t = (s3vTextureObjectPtr) tObj->DriverData; - const struct gl_texture_image *baseImage = tObj->Image[0][tObj->BaseLevel]; - GLint firstLevel, lastLevel, numLevels; - GLint log2Width, log2Height; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vSetTexImages: #%i ***\n", ++times)); -#endif - - t->texelBytes = 2; /* FIXME: always 2 ? */ - - /* Compute which mipmap levels we really want to send to the hardware. - * This depends on the base image size, GL_TEXTURE_MIN_LOD, - * GL_TEXTURE_MAX_LOD, GL_TEXTURE_BASE_LEVEL, and GL_TEXTURE_MAX_LEVEL. - * Yes, this looks overly complicated, but it's all needed. - */ - if (tObj->MinFilter == GL_LINEAR || tObj->MinFilter == GL_NEAREST) { - firstLevel = lastLevel = tObj->BaseLevel; - } - else { - firstLevel = tObj->BaseLevel + (GLint) (tObj->MinLod + 0.5); - firstLevel = MAX2(firstLevel, tObj->BaseLevel); - lastLevel = tObj->BaseLevel + (GLint) (tObj->MaxLod + 0.5); - lastLevel = MAX2(lastLevel, tObj->BaseLevel); - lastLevel = MIN2(lastLevel, tObj->BaseLevel + baseImage->MaxLog2); - lastLevel = MIN2(lastLevel, tObj->MaxLevel); - lastLevel = MAX2(firstLevel, lastLevel); /* need at least one level */ - } - - /* save these values */ - t->firstLevel = firstLevel; - t->lastLevel = lastLevel; - - numLevels = lastLevel - firstLevel + 1; - - log2Width = tObj->Image[0][firstLevel]->WidthLog2; - log2Height = tObj->Image[0][firstLevel]->HeightLog2; - - - /* Figure out the amount of memory required to hold all the mipmap - * levels. Choose the smallest pitch to accomodate the largest - * mipmap: - */ - width = tObj->Image[0][firstLevel]->Width * t->texelBytes; - for (pitch = 32, log_pitch=2 ; pitch < width ; pitch *= 2 ) - log_pitch++; - - /* All images must be loaded at this pitch. Count the number of - * lines required: - */ - for ( height = i = 0 ; i < numLevels ; i++ ) { - t->image[i].image = tObj->Image[0][firstLevel + i]; - t->image[i].offset = height * pitch; - t->image[i].internalFormat = baseImage->Format; - height += t->image[i].image->Height; - t->TextureBaseAddr[i] = (t->BufAddr + t->image[i].offset + - _TEXALIGN) & (GLuint)(~_TEXALIGN); - } - - t->Pitch = pitch; - t->WidthLog2 = log2Width; - t->totalSize = height*pitch; - t->max_level = i-1; - vmesa->dirty |= S3V_UPLOAD_TEX0 /* | S3V_UPLOAD_TEX1*/; - vmesa->restore_primitive = -1; - DEBUG(("<><>pitch = TexStride = %i\n", pitch)); - DEBUG(("log2Width = %i\n", log2Width)); - - s3vUploadTexImages( vmesa, t ); -} - -static void s3vUpdateTexEnv( GLcontext *ctx, GLuint unit ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - const struct gl_texture_unit *texUnit = &ctx->Texture.Unit[unit]; - const struct gl_texture_object *tObj = texUnit->_Current; - const GLuint format = tObj->Image[0][tObj->BaseLevel]->Format; -/* - s3vTextureObjectPtr t = (s3vTextureObjectPtr)tObj->DriverData; - GLuint tc; -*/ - GLuint alpha = 0; - GLuint cmd = vmesa->CMD; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vUpdateTexEnv: %i ***\n", ++times)); -#endif - - cmd &= ~TEX_COL_MASK; - cmd &= ~TEX_BLEND_MAKS; -/* cmd &= ~ALPHA_BLEND_MASK; */ - - DEBUG(("format = ")); - - switch (format) { - case GL_RGB: - DEBUG_TEX(("GL_RGB\n")); - cmd |= TEX_COL_ARGB1555; - break; - case GL_LUMINANCE: - DEBUG_TEX(("GL_LUMINANCE\n")); - cmd |= TEX_COL_ARGB4444; - alpha = 1; /* FIXME: check */ - break; - case GL_ALPHA: - DEBUG_TEX(("GL_ALPHA\n")); - cmd |= TEX_COL_ARGB4444; - alpha = 1; - break; - case GL_LUMINANCE_ALPHA: - DEBUG_TEX(("GL_LUMINANCE_ALPHA\n")); - cmd |= TEX_COL_ARGB4444; - alpha = 1; - break; - case GL_INTENSITY: - DEBUG_TEX(("GL_INTENSITY\n")); - cmd |= TEX_COL_ARGB4444; - alpha = 1; - break; - case GL_RGBA: - DEBUG_TEX(("GL_RGBA\n")); - cmd |= TEX_COL_ARGB4444; - alpha = 1; - break; - case GL_COLOR_INDEX: - DEBUG_TEX(("GL_COLOR_INDEX\n")); - cmd |= TEX_COL_PAL; - break; - } - - DEBUG_TEX(("EnvMode = ")); - - switch (texUnit->EnvMode) { - case GL_REPLACE: - DEBUG_TEX(("GL_REPLACE\n")); - cmd |= TEX_REFLECT; /* FIXME */ - vmesa->_tri[1] = DO_TEX_UNLIT_TRI; /* FIXME: white tri hack */ - vmesa->_alpha_tex = ALPHA_TEX /* * alpha */; - break; - case GL_MODULATE: - DEBUG_TEX(("GL_MODULATE\n")); - cmd |= TEX_MODULATE; - vmesa->_tri[1] = DO_TEX_LIT_TRI; -#if 0 - if (alpha) - vmesa->_alpha_tex = ALPHA_TEX /* * alpha */; - else - vmesa->_alpha_tex = ALPHA_SRC /* * alpha */; -#else - vmesa->_alpha_tex = ALPHA_TEX ; -#endif - break; - case GL_ADD: - DEBUG_TEX(("DEBUG_TEX\n")); - /* do nothing ???*/ - break; - case GL_DECAL: - DEBUG_TEX(("GL_DECAL\n")); - cmd |= TEX_DECAL; - vmesa->_tri[1] = DO_TEX_LIT_TRI; - vmesa->_alpha_tex = ALPHA_OFF; - break; - case GL_BLEND: - DEBUG_TEX(("GL_BLEND\n")); - cmd |= TEX_DECAL; - vmesa->_tri[1] = DO_TEX_LIT_TRI; - vmesa->_alpha_tex = ALPHA_OFF; /* FIXME: sure? */ - break; - default: - fprintf(stderr, "unknown tex env mode"); - return; - } - - DEBUG_TEX(("\n\n vmesa->CMD was 0x%x\n", vmesa->CMD)); - DEBUG_TEX(( " vmesa->CMD is 0x%x\n\n", cmd )); - - vmesa->_alpha[1] = vmesa->_alpha_tex; - vmesa->CMD = cmd; /* | MIPMAP_LEVEL(8); */ - vmesa->restore_primitive = -1; -} - -static void s3vUpdateTexUnit( GLcontext *ctx, GLuint unit ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - struct gl_texture_unit *texUnit = &ctx->Texture.Unit[unit]; - GLuint cmd = vmesa->CMD; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vUpdateTexUnit: %i ***\n", ++times)); - DEBUG_TEX(("and vmesa->CMD was 0x%x\n", vmesa->CMD)); -#endif - - if (texUnit->_ReallyEnabled == TEXTURE_2D_BIT) - { - struct gl_texture_object *tObj = texUnit->_Current; - s3vTextureObjectPtr t = (s3vTextureObjectPtr)tObj->DriverData; - - /* Upload teximages (not pipelined) - */ - if (t->dirty_images) { -#if _TEXFLUSH - DMAFLUSH(); -#endif - s3vSetTexImages( vmesa, tObj ); - if (!t->MemBlock) { -#if _TEXFALLBACK - FALLBACK( vmesa, S3V_FALLBACK_TEXTURE, GL_TRUE ); -#endif - return; - } - } - - /* Update state if this is a different texture object to last - * time. - */ -#if 1 - if (vmesa->CurrentTexObj[unit] != t) { - vmesa->dirty |= S3V_UPLOAD_TEX0 /* << unit */; - vmesa->CurrentTexObj[unit] = t; - s3vUpdateTexLRU( vmesa, t ); /* done too often */ - } -#endif - - /* Update texture environment if texture object image format or - * texture environment state has changed. - */ - if (tObj->Image[0][tObj->BaseLevel]->Format != - vmesa->TexEnvImageFmt[unit]) { - vmesa->TexEnvImageFmt[unit] = tObj->Image[0][tObj->BaseLevel]->Format; - s3vUpdateTexEnv( ctx, unit ); - } -#if 1 - cmd = vmesa->CMD & ~MIP_MASK; - vmesa->dirty |= S3V_UPLOAD_TEX0 /* << unit */; - vmesa->CurrentTexObj[unit] = t; - vmesa->TexOffset = t->TextureBaseAddr[tObj->BaseLevel]; - vmesa->TexStride = t->Pitch; - cmd |= MIPMAP_LEVEL(t->WidthLog2); - - DEBUG_TEX(("\n\n>> vmesa->CMD was 0x%x\n", vmesa->CMD)); - DEBUG_TEX(( ">> vmesa->CMD is 0x%x\n\n", cmd )); - DEBUG_TEX(("t->WidthLog2 = %i\n", t->WidthLog2)); - DEBUG_TEX(("MIPMAP_LEVEL(t->WidthLog2) = 0x%x\n", MIPMAP_LEVEL(t->WidthLog2))); - - vmesa->CMD = cmd; - vmesa->restore_primitive = -1; -#endif - } - else if (texUnit->_ReallyEnabled) { /* _ReallyEnabled but != TEXTURE0_2D */ -#if _TEXFALLBACK - FALLBACK( vmesa, S3V_FALLBACK_TEXTURE, GL_TRUE ); -#endif - } - else /*if (vmesa->CurrentTexObj[unit])*/ { /* !_ReallyEnabled */ - vmesa->CurrentTexObj[unit] = 0; - vmesa->TexEnvImageFmt[unit] = 0; - vmesa->dirty &= ~(S3V_UPLOAD_TEX0<<unit); - } -} - - -void s3vUpdateTextureState( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - (void) vmesa; -#if TEX_DEBUG_ON - static unsigned int times=0; - DEBUG_TEX(("*** s3vUpdateTextureState: #%i ***\n", ++times)); -#endif - -#if _TEXFALLBACK - FALLBACK( vmesa, S3V_FALLBACK_TEXTURE, GL_FALSE ); -#endif - s3vUpdateTexUnit( ctx, 0 ); -#if 0 - s3vUpdateTexUnit( ctx, 1 ); -#endif -} diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_tris.c b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_tris.c deleted file mode 100644 index d6cceddd4..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_tris.c +++ /dev/null @@ -1,850 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#include <stdio.h> -#include <stdlib.h> - -#include <sys/ioctl.h> - -#include "s3v_context.h" -#include "s3v_vb.h" -#include "s3v_tris.h" - -#include "glheader.h" -#include "mtypes.h" -#include "macros.h" -#include "colormac.h" - -#include "swrast/swrast.h" -#include "swrast_setup/swrast_setup.h" -#include "tnl/tnl.h" -#include "tnl/t_context.h" -#include "tnl/t_pipeline.h" - - -/*********************************************************************** - * Build hardware rasterization functions * - ***********************************************************************/ - -#define DO_TRI 1 -#define HAVE_RGBA 1 -#define HAVE_SPEC 0 -#define HAVE_BACK_COLORS 0 -#define HAVE_HW_FLATSHADE 1 -#define VERTEX s3vVertex -#define TAB rast_tab - -#define VERT_SET_RGBA( v, c ) \ -do { \ - UNCLAMPED_FLOAT_TO_RGBA_CHAN( v->ub4[4], c); \ -/* *(v->ub4[4]) = c; \ */ \ -} while (0) -#define VERT_COPY_RGBA( v0, v1 ) v0->ui[4] = v1->ui[4] -/* -#define VERT_COPY_RGBA1( v0, v1 ) v0->ui[4] = v1->ui[4] -*/ -#define VERT_SAVE_RGBA( idx ) color[idx] = v[idx]->ui[4] -#define VERT_RESTORE_RGBA( idx ) v[idx]->ui[4] = color[idx] - -#define S3V_OFFSET_BIT 0x01 -#define S3V_TWOSIDE_BIT 0x02 -#define S3V_UNFILLED_BIT 0x04 -#define S3V_FALLBACK_BIT 0x08 -#define S3V_MAX_TRIFUNC 0x10 - - -static struct { - tnl_points_func points; - tnl_line_func line; - tnl_triangle_func triangle; - tnl_quad_func quad; -} rast_tab[S3V_MAX_TRIFUNC]; - -#define S3V_RAST_CULL_BIT 0x01 -#define S3V_RAST_FLAT_BIT 0x02 -#define S3V_RAST_TEX_BIT 0x04 - -static s3v_point_func s3v_point_tab[0x8]; -static s3v_line_func s3v_line_tab[0x8]; -static s3v_tri_func s3v_tri_tab[0x8]; -static s3v_quad_func s3v_quad_tab[0x8]; - -#define IND (0) -#define TAG(x) x -#include "s3v_tritmp.h" - -#define IND (S3V_RAST_CULL_BIT) -#define TAG(x) x##_cull -#include "s3v_tritmp.h" - -#define IND (S3V_RAST_FLAT_BIT) -#define TAG(x) x##_flat -#include "s3v_tritmp.h" - -#define IND (S3V_RAST_CULL_BIT|S3V_RAST_FLAT_BIT) -#define TAG(x) x##_cull_flat -#include "s3v_tritmp.h" - -#define IND (S3V_RAST_TEX_BIT) -#define TAG(x) x##_tex -#include "s3v_tritmp.h" - -#define IND (S3V_RAST_CULL_BIT|S3V_RAST_TEX_BIT) -#define TAG(x) x##_cull_tex -#include "s3v_tritmp.h" - -#define IND (S3V_RAST_FLAT_BIT|S3V_RAST_TEX_BIT) -#define TAG(x) x##_flat_tex -#include "s3v_tritmp.h" - -#define IND (S3V_RAST_CULL_BIT|S3V_RAST_FLAT_BIT|S3V_RAST_TEX_BIT) -#define TAG(x) x##_cull_flat_tex -#include "s3v_tritmp.h" - -static void init_rast_tab( void ) -{ - DEBUG(("*** init_rast_tab ***\n")); - - s3v_init(); - s3v_init_cull(); - s3v_init_flat(); - s3v_init_cull_flat(); - s3v_init_tex(); - s3v_init_cull_tex(); - s3v_init_flat_tex(); - s3v_init_cull_flat_tex(); -} - -/*********************************************************************** - * Rasterization fallback helpers * - ***********************************************************************/ - - -/* This code is hit only when a mix of accelerated and unaccelerated - * primitives are being drawn, and only for the unaccelerated - * primitives. - */ - -#if 0 -static void -s3v_fallback_quad( s3vContextPtr vmesa, - const s3vVertex *v0, - const s3vVertex *v1, - const s3vVertex *v2, - const s3vVertex *v3 ) -{ - GLcontext *ctx = vmesa->glCtx; - SWvertex v[4]; - s3v_translate_vertex( ctx, v0, &v[0] ); - s3v_translate_vertex( ctx, v1, &v[1] ); - s3v_translate_vertex( ctx, v2, &v[2] ); - s3v_translate_vertex( ctx, v3, &v[3] ); - DEBUG(("s3v_fallback_quad\n")); -/* _swrast_Quad( ctx, &v[0], &v[1], &v[2], &v[3] ); */ -} - -static void -s3v_fallback_tri( s3vContextPtr vmesa, - const s3vVertex *v0, - const s3vVertex *v1, - const s3vVertex *v2 ) -{ - GLcontext *ctx = vmesa->glCtx; - SWvertex v[3]; - s3v_translate_vertex( ctx, v0, &v[0] ); - s3v_translate_vertex( ctx, v1, &v[1] ); - s3v_translate_vertex( ctx, v2, &v[2] ); - DEBUG(("s3v_fallback_tri\n")); -/* _swrast_Triangle( ctx, &v[0], &v[1], &v[2] ); */ -} - -static void -s3v_fallback_line( s3vContextPtr vmesa, - const s3vVertex *v0, - const s3vVertex *v1 ) -{ - GLcontext *ctx = vmesa->glCtx; - SWvertex v[2]; - s3v_translate_vertex( ctx, v0, &v[0] ); - s3v_translate_vertex( ctx, v1, &v[1] ); - DEBUG(("s3v_fallback_line\n")); - _swrast_Line( ctx, &v[0], &v[1] ); -} - -/* -static void -s3v_fallback_point( s3vContextPtr vmesa, - const s3vVertex *v0 ) -{ - GLcontext *ctx = vmesa->glCtx; - SWvertex v[1]; - s3v_translate_vertex( ctx, v0, &v[0] ); - _swrast_Point( ctx, &v[0] ); -} -*/ -#endif - -/*********************************************************************** - * Choose rasterization functions * - ***********************************************************************/ - -#define _S3V_NEW_RASTER_STATE (_NEW_FOG | \ - _NEW_TEXTURE | \ - _DD_NEW_TRI_SMOOTH | \ - _DD_NEW_LINE_SMOOTH | \ - _DD_NEW_POINT_SMOOTH | \ - _DD_NEW_TRI_STIPPLE | \ - _DD_NEW_LINE_STIPPLE) - -#define LINE_FALLBACK (0) -#define TRI_FALLBACK (0) - -static void s3v_nodraw_triangle(GLcontext *ctx, s3vVertex *v0, - s3vVertex *v1, s3vVertex *v2) -{ - (void) (ctx && v0 && v1 && v2); -} - -static void s3v_nodraw_quad(GLcontext *ctx, - s3vVertex *v0, s3vVertex *v1, - s3vVertex *v2, s3vVertex *v3) -{ - (void) (ctx && v0 && v1 && v2 && v3); -} - -void s3vChooseRasterState(GLcontext *ctx); - -void s3vChooseRasterState(GLcontext *ctx) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - GLuint flags = ctx->_TriangleCaps; - GLuint ind = 0; - - DEBUG(("*** s3vChooseRasterState ***\n")); - - if (ctx->Polygon.CullFlag) { - if (ctx->Polygon.CullFaceMode == GL_FRONT_AND_BACK) { - vmesa->draw_tri = (s3v_tri_func)s3v_nodraw_triangle; - vmesa->draw_quad = (s3v_quad_func)s3v_nodraw_quad; - return; - } - ind |= S3V_RAST_CULL_BIT; - /* s3v_update_cullsign(ctx); */ - } /* else vmesa->backface_sign = 0; */ - - if ( flags & DD_FLATSHADE ) - ind |= S3V_RAST_FLAT_BIT; - - if ( ctx->Texture.Unit[0]._ReallyEnabled ) { - ind |= S3V_RAST_TEX_BIT; - } - - DEBUG(("ind = %i\n", ind)); - - vmesa->draw_line = s3v_line_tab[ind]; - vmesa->draw_tri = s3v_tri_tab[ind]; - vmesa->draw_quad = s3v_quad_tab[ind]; - vmesa->draw_point = s3v_point_tab[ind]; - -#if 0 - /* Hook in fallbacks for specific primitives. CURRENTLY DISABLED - */ - - if (flags & LINE_FALLBACK) - vmesa->draw_line = s3v_fallback_line; - - if (flags & TRI_FALLBACK) { - DEBUG(("TRI_FALLBACK\n")); - vmesa->draw_tri = s3v_fallback_tri; - vmesa->draw_quad = s3v_fallback_quad; - } -#endif -} - - - - -/*********************************************************************** - * Macros for t_dd_tritmp.h to draw basic primitives * - ***********************************************************************/ - -#define TRI( v0, v1, v2 ) \ -do { \ - /* - if (DO_FALLBACK) \ - vmesa->draw_tri( vmesa, v0, v1, v2 ); \ - else */ \ - DEBUG(("TRI: max was here\n")); /* \ - s3v_draw_tex_triangle( vmesa, v0, v1, v2 ); */ \ - vmesa->draw_tri( vmesa, v0, v1, v2 ); \ -} while (0) - -#define QUAD( v0, v1, v2, v3 ) \ -do { \ - DEBUG(("QUAD: max was here\n")); \ - vmesa->draw_quad( vmesa, v0, v1, v2, v3 ); \ -} while (0) - -#define LINE( v0, v1 ) \ -do { \ - DEBUG(("LINE: max was here\n")); \ - vmesa->draw_line( vmesa, v0, v1 ); \ -} while (0) - -#define POINT( v0 ) \ -do { \ - vmesa->draw_point( vmesa, v0 ); \ -} while (0) - - -/*********************************************************************** - * Build render functions from dd templates * - ***********************************************************************/ - -/* -#define S3V_OFFSET_BIT 0x01 -#define S3V_TWOSIDE_BIT 0x02 -#define S3V_UNFILLED_BIT 0x04 -#define S3V_FALLBACK_BIT 0x08 -#define S3V_MAX_TRIFUNC 0x10 - - -static struct { - points_func points; - line_func line; - triangle_func triangle; - quad_func quad; -} rast_tab[S3V_MAX_TRIFUNC]; -*/ - -#define DO_FALLBACK (IND & S3V_FALLBACK_BIT) -#define DO_OFFSET (IND & S3V_OFFSET_BIT) -#define DO_UNFILLED (IND & S3V_UNFILLED_BIT) -#define DO_TWOSIDE (IND & S3V_TWOSIDE_BIT) -#define DO_FLAT 0 -#define DO_TRI 1 -#define DO_QUAD 1 -#define DO_LINE 1 -#define DO_POINTS 1 -#define DO_FULL_QUAD 1 - -#define HAVE_RGBA 1 -#define HAVE_SPEC 0 -#define HAVE_BACK_COLORS 0 -#define HAVE_HW_FLATSHADE 1 -#define VERTEX s3vVertex -#define TAB rast_tab - -#define DEPTH_SCALE 1.0 -#define UNFILLED_TRI unfilled_tri -#define UNFILLED_QUAD unfilled_quad -#define VERT_X(_v) _v->v.x -#define VERT_Y(_v) _v->v.y -#define VERT_Z(_v) _v->v.z -#define AREA_IS_CCW( a ) (a > 0) -#define GET_VERTEX(e) (vmesa->verts + (e<<vmesa->vertex_stride_shift)) - -#if 0 -#define VERT_SET_RGBA( v, c ) \ -do { \ -/* UNCLAMPED_FLOAT_TO_RGBA_CHAN( v->ub4[4], c) */ \ -} while (0) - -#define VERT_COPY_RGBA( v0, v1 ) v0->ui[4] = v1->ui[4] -/* -#define VERT_COPY_RGBA1( v0, v1 ) v0->ui[4] = v1->ui[4] -*/ -#define VERT_SAVE_RGBA( idx ) color[idx] = v[idx]->ui[4] -#define VERT_RESTORE_RGBA( idx ) v[idx]->ui[4] = color[idx] -#endif - -#define LOCAL_VARS(n) \ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); \ - GLuint color[n]; \ - (void) color; - - -/*********************************************************************** - * Helpers for rendering unfilled primitives * - ***********************************************************************/ - -static const GLuint hw_prim[GL_POLYGON+1] = { - PrimType_Points, - PrimType_Lines, - PrimType_Lines, - PrimType_Lines, - PrimType_Triangles, - PrimType_Triangles, - PrimType_Triangles, - PrimType_Triangles, - PrimType_Triangles, - PrimType_Triangles -}; - -static void s3vResetLineStipple( GLcontext *ctx ); -static void s3vRasterPrimitive( GLcontext *ctx, GLuint hwprim ); -static void s3vRenderPrimitive( GLcontext *ctx, GLenum prim ); -/* -extern static void s3v_lines_emit(GLcontext *ctx, GLuint start, GLuint end); -extern static void s3v_tris_emit(GLcontext *ctx, GLuint start, GLuint end); -*/ -#define RASTERIZE(x) if (vmesa->hw_primitive != hw_prim[x]) \ - s3vRasterPrimitive( ctx, hw_prim[x] ) -#define RENDER_PRIMITIVE vmesa->render_primitive -#define TAG(x) x -#define IND S3V_FALLBACK_BIT -#include "tnl_dd/t_dd_unfilled.h" -#undef IND - -/*********************************************************************** - * Generate GL render functions * - ***********************************************************************/ - -#define IND (0) -#define TAG(x) x -#include "tnl_dd/t_dd_tritmp.h" - -#define IND (S3V_OFFSET_BIT) -#define TAG(x) x##_offset -#include "tnl_dd/t_dd_tritmp.h" - -#define IND (S3V_TWOSIDE_BIT) -#define TAG(x) x##_twoside -#include "tnl_dd/t_dd_tritmp.h" - -#define IND (S3V_TWOSIDE_BIT|S3V_OFFSET_BIT) -#define TAG(x) x##_twoside_offset -#include "tnl_dd/t_dd_tritmp.h" - -#define IND (S3V_UNFILLED_BIT) -#define TAG(x) x##_unfilled -#include "tnl_dd/t_dd_tritmp.h" - -#define IND (S3V_OFFSET_BIT|S3V_UNFILLED_BIT) -#define TAG(x) x##_offset_unfilled -#include "tnl_dd/t_dd_tritmp.h" - -#define IND (S3V_TWOSIDE_BIT|S3V_UNFILLED_BIT) -#define TAG(x) x##_twoside_unfilled -#include "tnl_dd/t_dd_tritmp.h" - -#define IND (S3V_TWOSIDE_BIT|S3V_OFFSET_BIT|S3V_UNFILLED_BIT) -#define TAG(x) x##_twoside_offset_unfilled -#include "tnl_dd/t_dd_tritmp.h" - - -static void init_render_tab( void ) -{ - DEBUG(("*** init_render_tab ***\n")); - - init(); - init_offset(); - init_twoside(); - init_twoside_offset(); - init_unfilled(); - init_offset_unfilled(); - init_twoside_unfilled(); - init_twoside_offset_unfilled(); -} - - -/**********************************************************************/ -/* Render unclipped begin/end objects */ -/**********************************************************************/ - -#define VERT(x) (s3vVertex *)(s3vverts + (x << shift)) - -#define RENDER_POINTS( start, count ) \ - DEBUG(("RENDER_POINTS...(ok)\n")); \ - for ( ; start < count ; start++) \ - vmesa->draw_line( vmesa, VERT(start), VERT(start) ) - /* vmesa->draw_point( vmesa, VERT(start) ) */ - -#define RENDER_LINE( v0, v1 ) \ - /* DEBUG(("RENDER_LINE...(ok)\n")); \ */ \ - vmesa->draw_line( vmesa, VERT(v0), VERT(v1) ); \ - DEBUG(("RENDER_LINE...(ok)\n")) - -#define RENDER_TRI( v0, v1, v2 ) \ - DEBUG(("RENDER_TRI...(ok)\n")); \ - vmesa->draw_tri( vmesa, VERT(v0), VERT(v1), VERT(v2) ) - -#define RENDER_QUAD( v0, v1, v2, v3 ) \ - DEBUG(("RENDER_QUAD...(ok)\n")); \ - /* s3v_draw_quad( vmesa, VERT(v0), VERT(v1), VERT(v2),VERT(v3) ) */\ - /* s3v_draw_triangle( vmesa, VERT(v0), VERT(v1), VERT(v2) ); \ - s3v_draw_triangle( vmesa, VERT(v0), VERT(v2), VERT(v3) ) */ \ - vmesa->draw_quad( vmesa, VERT(v0), VERT(v1), VERT(v2), VERT(v3) ) - -#define INIT(x) s3vRenderPrimitive( ctx, x ); -#undef LOCAL_VARS -#define LOCAL_VARS \ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); \ - const GLuint shift = vmesa->vertex_stride_shift; \ - const char *s3vverts = (char *)vmesa->verts; \ - const GLboolean stipple = ctx->Line.StippleFlag; \ - (void) stipple; -#define RESET_STIPPLE if ( stipple ) s3vResetLineStipple( ctx ); -#define RESET_OCCLUSION -#define PRESERVE_VB_DEFS -#define ELT(x) (x) -#define TAG(x) s3v_##x##_verts -#include "tnl_dd/t_dd_rendertmp.h" - - -/**********************************************************************/ -/* Render clipped primitives */ -/**********************************************************************/ - -static void s3vRenderClippedPoly( GLcontext *ctx, const GLuint *elts, - GLuint n ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - struct vertex_buffer *VB = &TNL_CONTEXT(ctx)->vb; - TNLcontext *tnl = TNL_CONTEXT(ctx); - GLuint prim = vmesa->render_primitive; - - DEBUG(("I AM in: s3vRenderClippedPoly\n")); - - /* Render the new vertices as an unclipped polygon. - */ - if (1) - { - GLuint *tmp = VB->Elts; - VB->Elts = (GLuint *)elts; - tnl->Driver.Render.PrimTabElts[GL_POLYGON] - ( ctx, 0, n, PRIM_BEGIN|PRIM_END ); - - VB->Elts = tmp; - } - - /* Restore the render primitive - */ -#if 1 - if (prim != GL_POLYGON) { - DEBUG(("and prim != GL_POLYGON\n")); - tnl->Driver.Render.PrimitiveNotify( ctx, prim ); - } - -#endif -} - -static void s3vRenderClippedLine( GLcontext *ctx, GLuint ii, GLuint jj ) -{ - TNLcontext *tnl = TNL_CONTEXT(ctx); - /*tnl->Driver.LineFunc = s3v_line_tab[2];*/ /* _swsetup_Line; */ - - DEBUG(("I AM in: s3vRenderClippedLine\n")); - tnl->Driver.Render.Line( ctx, ii, jj ); -} - - -/**********************************************************************/ -/* Choose render functions */ -/**********************************************************************/ - - - -#define _S3V_NEW_RENDERSTATE (_DD_NEW_TRI_UNFILLED | \ - _DD_NEW_TRI_LIGHT_TWOSIDE | \ - _DD_NEW_TRI_OFFSET) - -#define ANY_RASTER_FLAGS (DD_TRI_LIGHT_TWOSIDE|DD_TRI_OFFSET|DD_TRI_UNFILLED) - -static void s3vChooseRenderState(GLcontext *ctx) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - TNLcontext *tnl = TNL_CONTEXT(ctx); - GLuint flags = ctx->_TriangleCaps; - GLuint index = 0; - - DEBUG(("s3vChooseRenderState\n")); - - if (flags & ANY_RASTER_FLAGS) { - if (flags & DD_TRI_LIGHT_TWOSIDE) index |= S3V_TWOSIDE_BIT; - if (flags & DD_TRI_OFFSET) index |= S3V_OFFSET_BIT; - if (flags & DD_TRI_UNFILLED) index |= S3V_UNFILLED_BIT; - } - - DEBUG(("vmesa->RenderIndex = %i\n", vmesa->RenderIndex)); - DEBUG(("index = %i\n", index)); - - if (vmesa->RenderIndex != index) { - vmesa->RenderIndex = index; - - tnl->Driver.Render.Points = rast_tab[index].points; - tnl->Driver.Render.Line = rast_tab[index].line; - tnl->Driver.Render.Triangle = rast_tab[index].triangle; - tnl->Driver.Render.Quad = rast_tab[index].quad; - - if (vmesa->RenderIndex == 0) - tnl->Driver.Render.PrimTabVerts = s3v_render_tab_verts; - else - tnl->Driver.Render.PrimTabVerts = _tnl_render_tab_verts; - tnl->Driver.Render.PrimTabElts = _tnl_render_tab_elts; - tnl->Driver.Render.ClippedLine = s3vRenderClippedLine; - tnl->Driver.Render.ClippedPolygon = s3vRenderClippedPoly; - } -} - - -/**********************************************************************/ -/* High level hooks for t_vb_render.c */ -/**********************************************************************/ - - - -/* Determine the rasterized primitive when not drawing unfilled - * polygons. - * - * Used only for the default render stage which always decomposes - * primitives to trianges/lines/points. For the accelerated stage, - * which renders strips as strips, the equivalent calculations are - * performed in s3v_render.c. - */ - -static void s3vRasterPrimitive( GLcontext *ctx, GLuint hwprim ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); -/* __DRIdrawablePrivate *dPriv = vmesa->driDrawable; */ - GLuint cmd = vmesa->CMD; - - unsigned int _hw_prim = hwprim; - - DEBUG(("s3vRasterPrimitive: hwprim = 0x%x ", _hw_prim)); - -/* printf("* vmesa->CMD = 0x%x\n", vmesa->CMD); */ - - if (vmesa->hw_primitive != _hw_prim) - { - DEBUG(("(new one) ***\n")); - cmd &= ~DO_MASK; - cmd &= ~ALPHA_BLEND_MASK; - vmesa->hw_primitive = _hw_prim; - - if (_hw_prim == PrimType_Triangles) { - /* TRI */ - DEBUG(("->switching to tri\n")); - cmd |= (vmesa->_tri[vmesa->_3d_mode] | vmesa->_alpha[vmesa->_3d_mode]); - } else if (_hw_prim == PrimType_Lines - || _hw_prim == PrimType_Points) { - /* LINE */ - DEBUG(("->switching to line\n")); - cmd |= (DO_3D_LINE | vmesa->_alpha[0]); - } else { - /* ugh? */ - DEBUG(("->switching to your sis'ass\n")); - } - - DEBUG(("\n")); - - vmesa->restore_primitive = _hw_prim; - /* 0xacc16827: good value -> lightened newave!!! */ - vmesa->CMD = cmd; - CMDCHANGE(); - } -} - -static void s3vRenderPrimitive( GLcontext *ctx, GLenum prim ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - __DRIdrawablePrivate *dPriv = vmesa->driDrawable; - GLuint cmd = vmesa->CMD; - - unsigned int _hw_prim = hw_prim[prim]; - - vmesa->render_primitive = prim; - vmesa->hw_primitive = _hw_prim; - - DEBUG(("s3vRenderPrimitive #%i ", prim)); - DEBUG(("_hw_prim = 0x%x\n", _hw_prim)); - -/* printf(" vmesa->CMD = 0x%x\n", vmesa->CMD); */ - - if (_hw_prim != vmesa->restore_primitive) { - DEBUG(("_hw_prim != vmesa->restore_primitive (was 0x%x)\n", - vmesa->restore_primitive)); -#if 1 - cmd &= ~DO_MASK; - cmd &= ~ALPHA_BLEND_MASK; -/* - printf(" cmd = 0x%x\n", cmd); - printf(" vmesa->_3d_mode=%i; vmesa->_tri[vmesa->_3d_mode]=0x%x\n", - vmesa->_3d_mode, vmesa->_tri[vmesa->_3d_mode]); - printf("vmesa->alpha[0] = 0x%x; vmesa->alpha[1] = 0x%x\n", - vmesa->_alpha[0], vmesa->_alpha[1]); -*/ - if (_hw_prim == PrimType_Triangles) { /* TRI */ - DEBUG(("->switching to tri\n")); - cmd |= (vmesa->_tri[vmesa->_3d_mode] | vmesa->_alpha[vmesa->_3d_mode]); - DEBUG(("vmesa->TexStride = %i\n", vmesa->TexStride)); - DEBUG(("vmesa->TexOffset = %i\n", vmesa->TexOffset)); - DMAOUT_CHECK(3DTRI_Z_BASE, 12); - } else { /* LINE */ - DEBUG(("->switching to line\n")); - cmd |= (DO_3D_LINE | vmesa->_alpha[0]); - DMAOUT_CHECK(3DLINE_Z_BASE, 12); - } - - DMAOUT(vmesa->s3vScreen->depthOffset & 0x003FFFF8); - DMAOUT(vmesa->DestBase); - /* DMAOUT(vmesa->ScissorLR); */ - /* DMAOUT(vmesa->ScissorTB); */ - - /* NOTE: we need to restore all these values since we - * are coming back from a vmesa->restore_primitive */ - DMAOUT( (0 << 16) | (dPriv->w-1) ); - DMAOUT( (0 << 16) | (dPriv->h-1) ); - DMAOUT( (vmesa->SrcStride << 16) | vmesa->TexStride ); - DMAOUT(vmesa->SrcStride); - DMAOUT(vmesa->TexOffset); - DMAOUT(vmesa->TextureBorderColor); - DMAOUT(0); /* FOG */ - DMAOUT(0); - DMAOUT(0); - DMAOUT(cmd); - /* 0xacc16827: good value -> lightened newave!!! */ - DMAFINISH(); - - vmesa->CMD = cmd; -#endif - } - - DEBUG(("\n")); - - vmesa->restore_primitive = _hw_prim; -} - -static void s3vRunPipeline( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - - DEBUG(("*** s3vRunPipeline ***\n")); - - if ( vmesa->new_state ) - s3vDDUpdateHWState( ctx ); - - if (vmesa->new_gl_state) { - - if (vmesa->new_gl_state & _NEW_TEXTURE) { - s3vUpdateTextureState( ctx ); - } - - if (!vmesa->Fallback) { - if (vmesa->new_gl_state & _S3V_NEW_VERTEX) - s3vChooseVertexState( ctx ); - - if (vmesa->new_gl_state & _S3V_NEW_RASTER_STATE) - s3vChooseRasterState( ctx ); - - if (vmesa->new_gl_state & _S3V_NEW_RENDERSTATE) - s3vChooseRenderState( ctx ); - } - - vmesa->new_gl_state = 0; - - } - - _tnl_run_pipeline( ctx ); -} - -static void s3vRenderStart( GLcontext *ctx ) -{ - /* Check for projective texturing. Make sure all texcoord - * pointers point to something. (fix in mesa?) - */ - - DEBUG(("s3vRenderStart\n")); - /* s3vCheckTexSizes( ctx ); */ -} - -static void s3vRenderFinish( GLcontext *ctx ) -{ - if (0) - _swrast_flush( ctx ); /* never needed */ -} - -static void s3vResetLineStipple( GLcontext *ctx ) -{ -/* s3vContextPtr vmesa = S3V_CONTEXT(ctx); */ - - /* Reset the hardware stipple counter. - */ -/* - CHECK_DMA_BUFFER(vmesa, 1); - WRITE(vmesa->buf, UpdateLineStippleCounters, 0); -*/ -} - - -/**********************************************************************/ -/* Transition to/from hardware rasterization. */ -/**********************************************************************/ - - -void s3vFallback( s3vContextPtr vmesa, GLuint bit, GLboolean mode ) -{ - GLcontext *ctx = vmesa->glCtx; - TNLcontext *tnl = TNL_CONTEXT(ctx); - GLuint oldfallback = vmesa->Fallback; - - DEBUG(("*** s3vFallback: ")); - - if (mode) { - vmesa->Fallback |= bit; - if (oldfallback == 0) { - DEBUG(("oldfallback == 0 ***\n")); - _swsetup_Wakeup( ctx ); - _tnl_need_projected_coords( ctx, GL_TRUE ); - vmesa->RenderIndex = ~0; - } - } - else { - DEBUG(("***\n")); - vmesa->Fallback &= ~bit; - if (oldfallback == bit) { - _swrast_flush( ctx ); - tnl->Driver.Render.Start = s3vRenderStart; - tnl->Driver.Render.PrimitiveNotify = s3vRenderPrimitive; - tnl->Driver.Render.Finish = s3vRenderFinish; - tnl->Driver.Render.BuildVertices = s3vBuildVertices; - tnl->Driver.Render.ResetLineStipple = s3vResetLineStipple; - vmesa->new_gl_state |= (_S3V_NEW_RENDERSTATE| - _S3V_NEW_RASTER_STATE| - _S3V_NEW_VERTEX); - } - } -} - - -/**********************************************************************/ -/* Initialization. */ -/**********************************************************************/ - - -void s3vInitTriFuncs( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - TNLcontext *tnl = TNL_CONTEXT(ctx); - static int firsttime = 1; - - if (firsttime) { - init_rast_tab(); - init_render_tab(); - firsttime = 0; - } - - vmesa->RenderIndex = ~0; - - tnl->Driver.RunPipeline = s3vRunPipeline; - tnl->Driver.Render.Start = s3vRenderStart; - tnl->Driver.Render.Finish = s3vRenderFinish; - tnl->Driver.Render.PrimitiveNotify = s3vRenderPrimitive; - tnl->Driver.Render.ResetLineStipple = s3vResetLineStipple; -/* - tnl->Driver.RenderInterp = _swsetup_RenderInterp; - tnl->Driver.RenderCopyPV = _swsetup_RenderCopyPV; -*/ - tnl->Driver.Render.BuildVertices = s3vBuildVertices; -} diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_tris.h b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_tris.h deleted file mode 100644 index 0010a7fe0..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_tris.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#ifndef _S3V_TRIS_H -#define _S3V_TRIS_H - -extern void s3vDDTrifuncInit(void); -extern void s3vDDChooseTriRenderState(GLcontext *); - -#endif /* !(_S3V_TRIS_H) */ diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_tritmp.h b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_tritmp.h deleted file mode 100644 index 16318f4c4..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_tritmp.h +++ /dev/null @@ -1,958 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -/**** MACROS start ****/ - -/* point/line macros */ - -#define LINE_VERT_VARS \ - SWvertex v[3]; \ - s3vVertex* vvv[2]; \ - int x[3], y[3], z[3]; \ - int idx[3]; \ - int dx01, dy01; \ - int delt02; \ - int deltzy, zstart; \ - int start02, end01; \ - int ystart, y01y12; \ - int i, tmp, tmp2, tmp3; \ - GLfloat ydiff, fy[3] -#define LINE_VERT_VARS_VOIDS \ - (void) v; (void) vvv; (void) x; (void) y; (void) z; (void) idx; \ - (void) dx01; (void) dy01; (void) delt02; (void) deltzy; \ - (void) zstart; (void) start02; (void) ystart; (void) y01y12; \ - (void) i; (void) tmp; (void) tmp2; (void) tmp3; (void) ydiff; (void) fy - -#define LINE_FLAT_VARS \ - int arstart, gbstart; \ - int deltarx, deltgbx, deltary, deltgby; \ - GLubyte *(col)[3] -#define LINE_FLAT_VARS_VOIDS \ - (void) arstart; (void) gbstart; (void) deltarx; (void) deltgbx; \ - (void) deltary; (void) deltgby; (void) col - -#define LINE_GOURAUD_VARS \ - int arstart, gbstart; \ - int deltary, deltgby; \ - int ctmp, ctmp2, ctmp3, ctmp4; \ - GLubyte *(col)[3] -#define LINE_GOURAUD_VARS_VOIDS \ - (void) arstart; (void) gbstart; (void) deltary; (void) deltgby; \ - (void) ctmp; (void) ctmp2; (void) ctmp3; (void) ctmp4; (void) col - -#define SORT_LINE_VERT() \ -do { \ - if(v[0].win[1] <= v[1].win[1]) { \ -\ - idx[0] = 0; \ - idx[1] = 1; \ -\ - } else if (v[0].win[1] > v[1].win[1]) { \ -\ - idx[0] = 1; \ - idx[1] = 0; \ -\ - } \ -} while(0) - -#define SET_LINE_VERT() \ -do { \ - x[0] = (v[idx[0]].win[0] * 1024.0f * 1024.0f); /* 0x100000 */ \ - y[0] = fy[0] = dPriv->h - v[idx[0]].win[1]; \ - z[0] = (v[idx[0]].win[2]) * 1024.0f * 32.0f; /* 0x8000; */ \ -\ - x[1] = (v[idx[1]].win[0] * 1024.0f * 1024.0f); /* 0x100000 */ \ - y[1] = dPriv->h - v[idx[1]].win[1]; \ - z[1] = (v[idx[1]].win[2]) * 1024.0f * 32.0f; /* 0x8000 */ \ -} while(0) - -#define SET_LINE_XY() \ -do { \ - tmp = v[idx[0]].win[0]; \ - tmp2 = v[idx[1]].win[0]; \ -\ - dx01 = x[0] - x[1]; \ - dy01 = y[0] - y[1]; \ -\ - ydiff = fy[0] - (float)y[0]; \ - ystart = y[0]; \ - y01y12 = dy01 + 1; \ -} while (0) - -#define SET_LINE_DIR() \ -do { \ - if (tmp2 > tmp) { \ - y01y12 |= 0x80000000; \ - tmp3 = tmp2-tmp; \ - } else { \ - tmp3 = tmp-tmp2; \ - } \ -\ - end01 = ((tmp << 16) | tmp2); \ -\ - if (dy01) \ - delt02 = -(dx01/dy01); \ - else \ - delt02 = 0; \ -\ - if (dy01 > tmp3) { /* Y MAJ */ \ - /* NOTE: tmp3 always >=0 */ \ - start02 = x[0]; \ - } else if (delt02 >= 0){ /* X MAJ - positive delta */ \ - start02 = x[0] + delt02/2; \ - dy01 = tmp3; /* could be 0 */ \ - } else { /* X MAJ - negative delta */ \ - start02 = x[0] + delt02/2 + ((1 << 20) - 1); \ - dy01 = tmp3; /* could be 0 */ \ - } \ -} while(0) - -#define SET_LINE_Z() \ -do { \ - zstart = z[0]; \ -\ - if (dy01) { \ - deltzy = (z[1] - z[0])/dy01; \ - } else { \ - deltzy = 0; /* dy01 = tmp3 = 0 (it's a point)*/ \ - } \ -} while (0) - -#define SET_LINE_FLAT_COL() \ -do { \ - col[0] = &(v[idx[0]].color[0]); \ - deltarx = deltary = deltgbx = deltgby = 0; \ - gbstart = (((col[0][1]) << 23) | ((col[0][2]) << 7)); \ - arstart = (((col[0][3]) << 23) | ((col[0][0]) << 7)); \ -} while(0) - -#define SET_LINE_GOURAUD_COL() \ -do { \ - col[0] = &(v[idx[0]].color[0]); \ - col[1] = &(v[idx[1]].color[0]); \ -\ - vvv[0] = _v0; \ - vvv[1] = _v1; \ -\ - for (i=0; i<2; i++) { \ - /* FIXME: swapped ! */ \ - col[i][0] = vvv[!idx[i]]->v.color.red; \ - col[i][1] = vvv[!idx[i]]->v.color.green; \ - col[i][2] = vvv[!idx[i]]->v.color.blue; \ - col[i][3] = vvv[!idx[i]]->v.color.alpha; \ - } \ -\ - if (dy01) { \ -\ - ctmp = ((col[0][1] - col[1][1]) << 7) / dy01; \ - ctmp2 = ((col[0][2] - col[1][2]) << 7) / dy01; \ - deltgby = ((ctmp << 16) & 0xFFFF0000) | (ctmp2 & 0xFFFF); \ -\ - ctmp3 = ((col[0][3] - col[1][3]) << 7) / dy01; \ - ctmp4 = ((col[0][0] - col[1][0]) << 7) / dy01; \ - deltary = ((ctmp3 << 16) & 0xFFFF0000) | (ctmp4 & 0xFFFF); \ - } else { \ - ctmp = ((col[1][1] - col[0][1]) << 7); \ - ctmp2 = ((col[1][2] - col[0][2]) << 7); \ - deltgby = ((ctmp << 16) & 0xFFFF0000) | (ctmp2 & 0xFFFF); \ -\ - ctmp3 = ((col[1][3] - col[0][3]) << 7); \ - ctmp4 = ((col[1][0] - col[0][0]) << 7); \ - deltary = ((ctmp3 << 16) & 0xFFFF0000) | (ctmp4 & 0xFFFF); \ - deltgby = deltary = 0; \ - } \ -\ - idx[0] = 1; /* FIXME: swapped */ \ -\ - gbstart = \ - (((int)((ydiff * ctmp) + (col[idx[0]][1] << 7)) << 16) & 0x7FFF0000) \ - | ((int)((ydiff * ctmp2) + (col[idx[0]][2] << 7)) & 0x7FFF); \ - arstart = \ - (((int)((ydiff * ctmp3) + (col[idx[0]][3] << 7)) << 16) & 0x7FFF0000) \ - | ((int)((ydiff * ctmp4) + (col[idx[0]][0] << 7)) & 0x7FFF); \ -} while(0) - -#define SEND_LINE_COL() \ -do { \ - DMAOUT(deltgby); \ - DMAOUT(deltary); \ - DMAOUT(gbstart); \ - DMAOUT(arstart); \ -} while (0) - -#define SEND_LINE_VERT() \ -do { \ - DMAOUT(deltzy); \ - DMAOUT(zstart); \ - DMAOUT(0); \ - DMAOUT(0); \ - DMAOUT(0); \ - DMAOUT(end01); \ - DMAOUT(delt02); \ - DMAOUT(start02); \ - DMAOUT(ystart); \ - DMAOUT(y01y12); \ -} while (0) - - -/* tri macros (mostly stolen from utah-glx...) */ - -#define VERT_VARS \ - SWvertex v[3]; \ - int x[3], y[3], z[3]; \ - int idx[3]; \ - int dx01, dy01; \ - int dx02, dy02; \ - int dx12, dy12; \ - int delt01, delt02, delt12; \ - int deltzx, deltzy, zstart; \ - int start02, end01, end12; \ - int ystart, y01y12; \ - int i, tmp, lr; \ - GLfloat ydiff, fy[3] -#define VERT_VARS_VOIDS \ - (void) v; (void) x; (void) y; (void) z; (void) idx; (void) dx01; \ - (void) dy01; (void) dx02; (void) dy02; (void) dx12; (void) dy12; \ - (void) delt01; (void) delt02; (void) delt12; (void) deltzx; \ - (void) deltzy; (void) zstart; (void) start02; (void) end01; \ - (void) end12; (void) ystart; (void) y01y12; (void) i; (void) tmp; \ - (void) lr; (void) ydiff; (void) fy - -#define GOURAUD_VARS \ - int arstart, gbstart; \ - int deltarx, deltgbx, deltary, deltgby; \ - int ctmp, ctmp2, ctmp3, ctmp4; \ - GLubyte *(col)[3] -#define GOURAUD_VARS_VOIDS \ - (void) arstart; (void) gbstart; (void) deltarx; (void) deltgbx; \ - (void) deltary; (void) deltgby; (void) ctmp; (void) ctmp2; \ - (void) ctmp3; (void) ctmp4; (void) col - -#define FLAT_VARS \ - int arstart, gbstart; \ - int deltarx, deltgbx, deltary, deltgby; \ - GLubyte *(col)[3] -#define FLAT_VARS_VOIDS \ - (void) arstart; (void) gbstart; (void) deltarx; (void) deltgbx; \ - (void) deltary; (void) deltgby; (void) col - -#define TEX_VARS \ - int u0, u1, u2; \ - GLfloat ru0, ru1, ru2; \ - int v0, v1, v2; \ - GLfloat rv0, rv1, rv2; \ - GLfloat w0, w1, w2; \ - GLfloat rw0, rw1, rw2; \ - int baseu, basev; \ - int d0, d1, d2; \ - int deltdx, deltvx, deltux, deltdy, deltvy, deltuy; \ - int deltwx, deltwy; \ - int rbaseu, rbasev; \ - int dstart, ustart, wstart, vstart; \ - static int stmp = 0; \ - s3vTextureObjectPtr t -#define TEX_VARS_VOIDS \ - (void) u0; (void) u1; (void) u2; (void) ru0; (void) ru1; (void) ru2; \ - (void) v0; (void) v1; (void) v2; (void) rv0; (void) rv1; (void) rv2; \ - (void) w0; (void) w1; (void) w2; (void) rw0; (void) rw1; (void) rw2; \ - (void) baseu; (void) basev; (void) d0; (void) d1; (void) d2; \ - (void) deltdx; (void) deltvx; (void) deltux; (void) deltdy; \ - (void) deltuy; (void) deltwx; (void) deltwy; (void) rbaseu; \ - (void) rbasev; (void) dstart; (void) ustart; (void) wstart; \ - (void) vstart; (void) stmp; (void) t - -#define SORT_VERT() \ -do { \ - for (i=0; i<3; i++) \ - fy[i] = v[i].win[1]; \ -\ - if (fy[1] > fy[0]) { /* (fy[1] > fy[0]) */ \ -\ - if (fy[2] > fy[0]) { \ - idx[0] = 0; \ - if (fy[1] > fy[2]) { \ - idx[1] = 2; \ - idx[2] = 1; \ - } else { \ - idx[1] = 1; \ - idx[2] = 2; \ - } \ - } else { \ - idx[0] = 2; \ - idx[1] = 0; \ - idx[2] = 1; \ - } \ - } else { /* (fy[1] < y[0]) */ \ - if (fy[2] > fy[0]) { \ - idx[0] = 1; \ - idx[1] = 0; \ - idx[2] = 2; \ - } else { \ - idx[2] = 0; \ - if (fy[2] > fy[1]) { \ - idx[0] = 1; \ - idx[1] = 2; \ - } else { \ - idx[0] = 2; \ - idx[1] = 1; \ - } \ - } \ - } \ -} while(0) - -#define SET_VERT() \ -do { \ - for (i=0; i<3; i++) \ - { \ - x[i] = ((v[idx[i]].win[0]) * /* 0x100000*/ 1024.0 * 1024.0); \ - y[i] = fy[i] = (dPriv->h - v[idx[i]].win[1]); \ - z[i] = ((v[idx[i]].win[2]) * /* 0x8000 */ 1024.0 * 32.0); \ - } \ -\ - ydiff = fy[0] - (float)y[0]; \ -\ - ystart = y[0]; \ -\ - dx12 = x[2] - x[1]; \ - dy12 = y[1] - y[2]; \ - dx01 = x[1] - x[0]; \ - dy01 = y[0] - y[1]; \ - dx02 = x[2] - x[0]; \ - dy02 = y[0] - y[2]; \ -\ - delt01 = delt02 = delt12 = 0; \ -} while (0) - - -#define SET_XY() \ -do { \ - if (dy01) delt01 = dx01 / dy01; \ - if (dy12) delt12 = dx12 / dy12; \ - delt02 = dx02 / dy02; \ -\ - start02 = x[0] + (ydiff * delt02); \ - end01 = x[0] + (ydiff * delt01); \ - end12 = x[1] + ((fy[1] - (GLfloat)y[1]) * delt12); \ -} while (0) - -#define SET_DIR() \ -do { \ - tmp = x[1] - (dy01 * delt02 + x[0]); \ - if (tmp > 0) { \ - lr = 0x80000000; \ - } else { \ - tmp *= -1; \ - lr = 0; \ - } \ - tmp >>= 20; \ -\ - y01y12 = ((((y[0] - y[1]) & 0x7FF) << 16) \ - | ((y[1] - y[2]) & 0x7FF) | lr); \ -} while (0) - -#define SET_Z() \ -do { \ - deltzy = (z[2] - z[0]) / dy02; \ - if (tmp) { \ - deltzx = (z[1] - (dy01 * deltzy + z[0])) / tmp; \ - } else { \ - deltzx = 0; \ - } \ - zstart = (deltzy * ydiff) + z[0]; \ -} while (0) - -#define SET_FLAT_COL() \ -do { \ - col[0] = &(v[0].color[0]); \ - deltarx = deltary = deltgbx = deltgby = 0; \ - gbstart = (((col[0][1]) << 23) | ((col[0][2]) << 7)); \ - arstart = (((col[0][3]) << 23) | ((col[0][0]) << 7)); \ -} while(0) - -#define SET_GOURAUD_COL() \ -do { \ - col[0] = &(v[idx[0]].color[0]); \ - col[1] = &(v[idx[1]].color[0]); \ - col[2] = &(v[idx[2]].color[0]); \ -\ - ctmp = ((col[2][3] - col[0][3]) << 7) / dy02; \ - ctmp2 = ((col[2][0] - col[0][0]) << 7) / dy02; \ - deltary = ((ctmp << 16) & 0xFFFF0000) | (ctmp2 & 0xFFFF); \ - ctmp3 = ((col[2][1] - col[0][1]) << 7) / dy02; \ - ctmp4 = ((col[2][2] - col[0][2]) << 7) / dy02; \ - deltgby = ((ctmp3 << 16) & 0xFFFF0000) | (ctmp4 & 0xFFFF); \ - gbstart = \ - (((int)((ydiff * ctmp3) + (col[0][1] << 7)) << 16) & 0x7FFF0000) \ - | ((int)((ydiff * ctmp4) + (col[0][2] << 7)) & 0x7FFF); \ - arstart = \ - (((int)((ydiff * ctmp) + (col[0][3] << 7)) << 16) & 0x7FFF0000) \ - | ((int)((ydiff * ctmp2) + (col[0][0] << 7)) & 0x7FFF); \ - if (tmp) { \ - int ax, rx, gx, bx; \ - ax = ((col[1][3] << 7) - (dy01 * ctmp + (col[0][3] << 7))) / tmp; \ - rx = ((col[1][0] << 7) - (dy01 * ctmp2 + (col[0][0] << 7))) / tmp; \ - gx = ((col[1][1] << 7) - (dy01 * ctmp3 + (col[0][1] << 7))) / tmp; \ - bx = ((col[1][2] << 7) - (dy01 * ctmp4 + (col[0][2] << 7))) / tmp; \ - deltarx = ((ax << 16) & 0xFFFF0000) | (rx & 0xFFFF); \ - deltgbx = ((gx << 16) & 0xFFFF0000) | (bx & 0xFFFF); \ - } else { \ - deltgbx = deltarx = 0; \ - } \ -} while (0) - -#define SET_TEX_VERT() \ -do { \ - t = ((s3vTextureObjectPtr) \ - ctx->Texture.Unit[0]._Current->DriverData); \ - deltwx = deltwy = wstart = deltdx = deltdy = dstart = 0; \ -\ - u0 = (v[idx[0]].texcoord[0][0] \ - * (GLfloat)(t->image[0].image->Width) * 256.0); \ - u1 = (v[idx[1]].texcoord[0][0] \ - * (GLfloat)(t->globj->Image[0][0]->Width) * 256.0); \ - u2 = (v[idx[2]].texcoord[0][0] \ - * (GLfloat)(t->globj->Image[0][0]->Width) * 256.0); \ - v0 = (v[idx[0]].texcoord[0][1] \ - * (GLfloat)(t->globj->Image[0][0]->Height) * 256.0); \ - v1 = (v[idx[1]].texcoord[0][1] \ - * (GLfloat)(t->globj->Image[0][0]->Height) * 256.0); \ - v2 = (v[idx[2]].texcoord[0][1] \ - * (GLfloat)(t->globj->Image[0][0]->Height) * 256.0); \ -\ - w0 = (v[idx[0]].win[3]); \ - w1 = (v[idx[1]].win[3]); \ - w2 = (v[idx[2]].win[3]); \ -} while (0) - -#define SET_BASEUV() \ -do { \ - if (u0 < u1) { \ - if (u0 < u2) { \ - baseu = u0; \ - } else { \ - baseu = u2; \ - } \ - } else { \ - if (u1 < u2) { \ - baseu = u1; \ - } else { \ - baseu = u2; \ - } \ - } \ -\ - if (v0 < v1) { \ - if (v0 < v2) { \ - basev = v0; \ - } else { \ - basev = v2; \ - } \ - } else { \ - if (v1 < v2) { \ - basev = v1; \ - } else { \ - basev = v2; \ - } \ - } \ -} while (0) - - -#define SET_RW() \ -do { \ - /* GLfloat minW; \ -\ - if (w0 < w1) { \ - if (w0 < w2) { \ - minW = w0; \ - } else { \ - minW = w2; \ - } \ - } else { \ - if (w1 < w2) { \ - minW = w1; \ - } else { \ - minW = w2; \ - } \ - } */ \ -\ - rw0 = (512.0 * w0); \ - rw1 = (512.0 * w1); \ - rw2 = (512.0 * w2); \ -} while (0) - -#define SET_D() \ -do { \ - GLfloat sxy, suv; \ - int lev; \ -\ - suv = (v[idx[0]].texcoord[0][0] - \ - v[idx[2]].texcoord[0][0]) * \ - (v[idx[1]].texcoord[0][1] - \ - v[idx[2]].texcoord[0][1]) - \ - (v[idx[1]].texcoord[0][0] - \ - v[idx[2]].texcoord[0][0]) * \ - (v[idx[0]].texcoord[0][1] - \ - v[idx[2]].texcoord[0][2]); \ -\ - sxy = (v[idx[0]].texcoord[0][0] - \ - v[idx[2]].texcoord[0][0]) * \ - (v[idx[1]].texcoord[0][1] - \ - v[idx[2]].texcoord[0][1]) - \ - (v[idx[1]].texcoord[0][0] - \ - v[idx[2]].texcoord[0][0]) * \ - (v[idx[0]].texcoord[0][1] - \ - v[idx[2]].texcoord[0][2]); \ -\ - if (sxy < 0) sxy *= -1.0; \ - if (suv < 0) suv *= -1.0; \ -\ - lev = *(int*)&suv - *(int *)&sxy; \ - if (lev < 0) \ - lev = 0; \ - else \ - lev >>=23; \ - dstart = (lev << 27); \ -} while (0) - -#define SET_UVWD() \ -do { \ - SET_BASEUV(); \ - SET_RW(); \ - SET_D(); \ - ru0 = (((u0 - baseu) * rw0)); \ - ru1 = (((u1 - baseu) * rw1)); \ - ru2 = (((u2 - baseu) * rw2)); \ - rv0 = (((v0 - basev) * rw0)); \ - rv1 = (((v1 - basev) * rw1)); \ - rv2 = (((v2 - basev) * rw2)); \ -\ - while (baseu < 0) { baseu += (t->globj->Image[0][0]->Width << 8); } \ - while (basev < 0) { basev += (t->globj->Image[0][0]->Height << 8); } \ -\ - if (!(baseu & 0xFF)) \ - { baseu = (baseu >> 8); } \ - else \ - { baseu = (baseu >> 8) + 1; } \ -\ - if ((basev & 0x80) || !(basev & 0xFF)) \ - { basev = (basev >> 8); } \ - else \ - { basev = (basev >> 8) - 1; } \ -\ - rbaseu = (baseu) << (16 - t->globj->Image[0][0]->WidthLog2); \ - rbasev = (basev) << (16 - t->globj->Image[0][0]->WidthLog2); \ - deltuy = (((ru2 - ru0) / dy02)); \ - deltvy = (((rv2 - rv0) / dy02)); \ - rw0 *= (1024.0 * 512.0); \ - rw1 *= (1024.0 * 512.0); \ - rw2 *= (1024.0 * 512.0); \ - deltwy = ((rw2 - rw0) / dy02); \ - if (tmp) { \ - deltux = ((ru1 - (dy01 * deltuy + ru0)) / tmp); \ - deltvx = ((rv1 - (dy01 * deltvy + rv0)) / tmp); \ - deltwx = ((rw1 - (dy01 * deltwy + rw0)) / tmp); \ - } else { deltux = deltvx = deltwx = 0; } \ - ustart = (deltuy * ydiff) + (ru0); \ - vstart = (deltvy * ydiff) + (rv0); \ - wstart = (deltwy * ydiff) + (rw0); \ -} while (0) - -#define SEND_UVWD() \ -do { \ - DMAOUT((rbasev & 0xFFFF)); \ - DMAOUT((0xa0000000 | (rbaseu & 0xFFFF))); \ - DMAOUT(deltwx); \ - DMAOUT(deltwy); \ - DMAOUT(wstart); \ - DMAOUT(deltdx); \ - DMAOUT(deltvx); \ - DMAOUT(deltux); \ - DMAOUT(deltdy); \ - DMAOUT(deltvy); \ - DMAOUT(deltuy); \ - DMAOUT(dstart); \ - DMAOUT(vstart); \ - DMAOUT(ustart); \ -} while (0) - -#define SEND_VERT() \ -do { \ - DMAOUT(deltzx); \ - DMAOUT(deltzy); \ - DMAOUT(zstart); \ - DMAOUT(delt12); \ - DMAOUT(end12); \ - DMAOUT(delt01); \ - DMAOUT(end01); \ - DMAOUT(delt02); \ - DMAOUT(start02); \ - DMAOUT(ystart); \ - DMAOUT(y01y12); \ -} while (0) - -#define SEND_COL() \ -do { \ - DMAOUT(deltgbx); \ - DMAOUT(deltarx); \ - DMAOUT(deltgby); \ - DMAOUT(deltary); \ - DMAOUT(gbstart); \ - DMAOUT(arstart); \ -} while (0) - -/**** MACROS end ****/ - - - - -static void TAG(s3v_point)( s3vContextPtr vmesa, - const s3vVertex *_v0 ) -{ -} - -static void TAG(s3v_line)( s3vContextPtr vmesa, - const s3vVertex *_v0, - const s3vVertex *_v1 ) -{ - GLcontext *ctx = vmesa->glCtx; - __DRIdrawablePrivate *dPriv = vmesa->driDrawable; - - LINE_VERT_VARS; -#if (IND & S3V_RAST_FLAT_BIT) - LINE_FLAT_VARS; -#else - LINE_GOURAUD_VARS; -#endif -#if (IND & S3V_RAST_CULL_BIT) - GLfloat cull; - (void) cull; -#endif - LINE_VERT_VARS_VOIDS; -#if (IND & S3V_RAST_FLAT_BIT) - LINE_FLAT_VARS_VOIDS; -#else - LINE_GOURAUD_VARS_VOIDS; -#endif - - DEBUG(("*** s3v_line: ")); -#if (IND & S3V_RAST_CULL_BIT) - DEBUG(("cull ")); -#endif -#if (IND & S3V_RAST_FLAT_BIT) - DEBUG(("flat ")); -#endif - - DEBUG(("***\n")); - -#if 0 - s3v_print_vertex(ctx, _v0); - s3v_print_vertex(ctx, _v1); -#endif - - s3v_translate_vertex( ctx, _v0, &v[0] ); - s3v_translate_vertex( ctx, _v1, &v[1] ); - -#if (IND & S3V_RAST_CULL_BIT) - /* FIXME: should we cull lines too? */ -#endif - (void)v; /* v[0]; v[1]; */ - - SORT_LINE_VERT(); - SET_LINE_VERT(); - - SET_LINE_XY(); - SET_LINE_DIR(); - SET_LINE_Z(); - -#if (IND & S3V_RAST_FLAT_BIT) - SET_LINE_FLAT_COL(); -#else - SET_LINE_GOURAUD_COL(); -#endif - - DMAOUT_CHECK(3DLINE_GBD, 15); - SEND_LINE_COL(); - DMAOUT(0); - SEND_LINE_VERT(); - DMAFINISH(); -} - -static void TAG(s3v_triangle)( s3vContextPtr vmesa, - const s3vVertex *_v0, - const s3vVertex *_v1, - const s3vVertex *_v2 ) -{ - GLcontext *ctx = vmesa->glCtx; - __DRIdrawablePrivate *dPriv = vmesa->driDrawable; - - VERT_VARS; -#if (IND & S3v_RAST_FLAT_BIT) - FLAT_VARS; -#else - GOURAUD_VARS; -#endif -#if (IND & S3V_RAST_TEX_BIT) - TEX_VARS; -#endif -#if (IND & S3V_RAST_CULL_BIT) - GLfloat cull; -#endif - VERT_VARS_VOIDS; -#if (IND & S3v_RAST_FLAT_BIT) - FLAT_VARS_VOIDS; -#else - GOURAUD_VARS_VOIDS; -#endif -#if (IND & S3V_RAST_TEX_BIT) - TEX_VARS_VOIDS; -#endif - - DEBUG(("*** s3v_triangle: ")); -#if (IND & S3V_RAST_CULL_BIT) - DEBUG(("cull ")); -#endif -#if (IND & S3V_RAST_FLAT_BIT) - DEBUG(("flat ")); -#endif -#if (IND & S3V_RAST_TEX_BIT) - DEBUG(("tex ")); -#endif - -DEBUG(("***\n")); - -#if 0 - s3v_print_vertex(ctx, _v0); - s3v_print_vertex(ctx, _v1); - s3v_print_vertex(ctx, _v2); -#endif - - s3v_translate_vertex( ctx, _v0, &v[0] ); - s3v_translate_vertex( ctx, _v1, &v[1] ); - s3v_translate_vertex( ctx, _v2, &v[2] ); - -#if (IND & S3V_RAST_CULL_BIT) - cull = vmesa->backface_sign * - ((v[1].win[0] - v[0].win[0]) * (v[0].win[1] - v[2].win[1]) + - (v[1].win[1] - v[0].win[1]) * (v[2].win[0] - v[0].win[0])); - - if (cull < vmesa->cull_zero /* -0.02f */) return; -#endif - - (void)v; /* v[0]; v[1]; v[2]; */ - - SORT_VERT(); - SET_VERT(); - - if (dy02 == 0) return; - - SET_XY(); - SET_DIR(); - SET_Z(); - -#if (IND & S3V_RAST_TEX_BIT) - SET_TEX_VERT(); - SET_UVWD(); -#endif - -#if (IND & S3V_RAST_FLAT_BIT) - SET_FLAT_COL(); -#else - SET_GOURAUD_COL(); -#endif - -#if (IND & S3V_RAST_TEX_BIT) - DMAOUT_CHECK(3DTRI_BASEV, 31); - SEND_UVWD(); - SEND_COL(); - SEND_VERT(); - DMAFINISH(); -#else - DMAOUT_CHECK(3DTRI_GBX, 17); - SEND_COL(); - SEND_VERT(); - DMAFINISH(); -#endif -} - -static void TAG(s3v_quad)( s3vContextPtr vmesa, - const s3vVertex *_v0, - const s3vVertex *_v1, - const s3vVertex *_v2, - const s3vVertex *_v3 ) -{ - GLcontext *ctx = vmesa->glCtx; - __DRIdrawablePrivate *dPriv = vmesa->driDrawable; - - SWvertex temp_v[4]; - VERT_VARS; -#if (IND & S3v_RAST_FLAT_BIT) - FLAT_VARS; -#else - GOURAUD_VARS; -#endif -#if (IND & S3V_RAST_TEX_BIT) - TEX_VARS; -#endif -#if (IND & S3V_RAST_CULL_BIT) - GLfloat cull; -#endif - VERT_VARS_VOIDS; -#if (IND & S3v_RAST_FLAT_BIT) - FLAT_VARS_VOIDS; -#else - GOURAUD_VARS_VOIDS; -#endif -#if (IND & S3V_RAST_TEX_BIT) - TEX_VARS_VOIDS; -#endif - - DEBUG(("*** s3v_quad: ")); -#if (IND & S3V_RAST_CULL_BIT) - DEBUG(("cull ")); - /* printf(""); */ /* speed trick */ -#endif -#if (IND & S3V_RAST_FLAT_BIT) - DEBUG(("flat ")); -#endif -#if (IND & S3V_RAST_TEX_BIT) - DEBUG(("tex ")); -#endif - - DEBUG(("***\n")); - -#if 0 - s3v_print_vertex(ctx, _v0); - s3v_print_vertex(ctx, _v1); - s3v_print_vertex(ctx, _v2); - s3v_print_vertex(ctx, _v3); -#endif - s3v_translate_vertex( ctx, _v0, &temp_v[0] ); - s3v_translate_vertex( ctx, _v1, &temp_v[1] ); - s3v_translate_vertex( ctx, _v2, &temp_v[2] ); - s3v_translate_vertex( ctx, _v3, &temp_v[3] ); - - /* FIRST TRI (0,1,2) */ - - /* ROMEO */ - /* printf(""); */ /* speed trick (a) [turn on if (a) is return]*/ - - v[0] = temp_v[0]; - v[1] = temp_v[1]; - v[2] = temp_v[2]; - -#if (IND & S3V_RAST_CULL_BIT) - cull = vmesa->backface_sign * - ((v[1].win[0] - v[0].win[0]) * (v[0].win[1] - v[2].win[1]) + - (v[1].win[1] - v[0].win[1]) * (v[2].win[0] - v[0].win[0])); - - if (cull < vmesa->cull_zero /* -0.02f */) goto second; /* return; */ /* (a) */ -#endif - -#if 0 - v[0] = temp_v[0]; - v[1] = temp_v[1]; - v[2] = temp_v[2]; -#else - (void) v; -#endif - SORT_VERT(); - SET_VERT(); - - if (dy02 == 0) goto second; - - SET_XY(); - SET_DIR(); - SET_Z(); - -#if (IND & S3V_RAST_TEX_BIT) - SET_TEX_VERT(); - SET_UVWD(); -#endif - -#if (IND & S3V_RAST_FLAT_BIT) - SET_FLAT_COL(); -#else - SET_GOURAUD_COL(); -#endif - -#if (IND & S3V_RAST_TEX_BIT) - DMAOUT_CHECK(3DTRI_BASEV, 31); - SEND_UVWD(); - SEND_COL(); - SEND_VERT(); - DMAFINISH(); -#else - DMAOUT_CHECK(3DTRI_GBX, 17); - SEND_COL(); - SEND_VERT(); - DMAFINISH(); -#endif - - /* SECOND TRI (0,2,3) */ - -second: - v[0] = temp_v[0]; - v[1] = temp_v[2]; - v[2] = temp_v[3]; - -#if (IND & S3V_RAST_CULL_BIT) - cull = vmesa->backface_sign * - ((v[1].win[0] - v[0].win[0]) * (v[0].win[1] - v[2].win[1]) + - (v[1].win[1] - v[0].win[1]) * (v[2].win[0] - v[0].win[0])); - - if (cull < /* -0.02f */ vmesa->cull_zero) return; -#endif - -/* second: */ - - /* ROMEO */ - /* printf(""); */ /* speed trick */ - - v[0] = temp_v[0]; - v[1] = temp_v[2]; - v[2] = temp_v[3]; - - SORT_VERT(); - SET_VERT(); - - if (dy02 == 0) return; - - SET_XY(); - SET_DIR(); - SET_Z(); - -#if (IND & S3V_RAST_TEX_BIT) - SET_TEX_VERT(); - SET_UVWD(); -#endif - -#if (IND & S3V_RAST_FLAT_BIT) - SET_FLAT_COL(); -#else - SET_GOURAUD_COL(); -#endif - -#if (IND & S3V_RAST_TEX_BIT) - DMAOUT_CHECK(3DTRI_BASEV, 31); - SEND_UVWD(); - SEND_COL(); - SEND_VERT(); - DMAFINISH(); -#else - DMAOUT_CHECK(3DTRI_GBX, 17); - SEND_COL(); - SEND_VERT(); - DMAFINISH(); -#endif -} - -static void TAG(s3v_init)(void) -{ - s3v_point_tab[IND] = TAG(s3v_point); - s3v_line_tab[IND] = TAG(s3v_line); - s3v_tri_tab[IND] = TAG(s3v_triangle); - s3v_quad_tab[IND] = TAG(s3v_quad); -} - -#undef IND -#undef TAG diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_vb.c b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_vb.c deleted file mode 100644 index dadf2b489..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_vb.c +++ /dev/null @@ -1,339 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#include "glheader.h" -#include "mtypes.h" -#include "macros.h" -#include "colormac.h" - -#include "swrast_setup/swrast_setup.h" -#include "tnl/t_context.h" -#include "tnl/tnl.h" - -#include "s3v_context.h" -#include "s3v_vb.h" -#include "s3v_tris.h" - -#define S3V_XYZW_BIT 0x1 -#define S3V_RGBA_BIT 0x2 -#define S3V_TEX0_BIT 0x4 -#define S3V_PTEX_BIT 0x8 -#define S3V_FOG_BIT 0x10 -#define S3V_MAX_SETUP 0x20 - -static struct { - void (*emit)( GLcontext *, GLuint, GLuint, void *, GLuint ); - tnl_interp_func interp; - tnl_copy_pv_func copy_pv; - GLboolean (*check_tex_sizes)( GLcontext *ctx ); - GLuint vertex_size; - GLuint vertex_stride_shift; - GLuint vertex_format; -} setup_tab[S3V_MAX_SETUP]; - - -/* Only one vertex format, atm, so no need to give them names: - */ -#define TINY_VERTEX_FORMAT 1 -#define NOTEX_VERTEX_FORMAT 0 -#define TEX0_VERTEX_FORMAT 0 -#define TEX1_VERTEX_FORMAT 0 -#define PROJ_TEX1_VERTEX_FORMAT 0 -#define TEX2_VERTEX_FORMAT 0 -#define TEX3_VERTEX_FORMAT 0 -#define PROJ_TEX3_VERTEX_FORMAT 0 - -#define DO_XYZW (IND & S3V_XYZW_BIT) -#define DO_RGBA (IND & S3V_RGBA_BIT) -#define DO_SPEC 0 -#define DO_FOG (IND & S3V_FOG_BIT) -#define DO_TEX0 (IND & S3V_TEX0_BIT) -#define DO_TEX1 0 -#define DO_TEX2 0 -#define DO_TEX3 0 -#define DO_PTEX (IND & S3V_PTEX_BIT) - -#define VERTEX s3vVertex -#define LOCALVARS /* s3vContextPtr vmesa = S3V_CONTEXT(ctx); */ -#define GET_VIEWPORT_MAT() 0 /* vmesa->hw_viewport */ -#define GET_TEXSOURCE(n) n -#define GET_VERTEX_FORMAT() 0 -#define GET_VERTEX_SIZE() S3V_CONTEXT(ctx)->vertex_size * sizeof(GLuint) -#define GET_VERTEX_STORE() S3V_CONTEXT(ctx)->verts -#define GET_VERTEX_STRIDE_SHIFT() S3V_CONTEXT(ctx)->vertex_stride_shift -#define INVALIDATE_STORED_VERTICES() -#define GET_UBYTE_COLOR_STORE() &S3V_CONTEXT(ctx)->UbyteColor -#define GET_UBYTE_SPEC_COLOR_STORE() &S3V_CONTEXT(ctx)->UbyteSecondaryColor - -#define HAVE_HW_VIEWPORT 1 /* FIXME */ -#define HAVE_HW_DIVIDE 1 -#define HAVE_RGBA_COLOR 0 /* we're BGRA */ -#define HAVE_TINY_VERTICES 1 -#define HAVE_NOTEX_VERTICES 0 -#define HAVE_TEX0_VERTICES 0 -#define HAVE_TEX1_VERTICES 0 -#define HAVE_TEX2_VERTICES 0 -#define HAVE_TEX3_VERTICES 0 -#define HAVE_PTEX_VERTICES 1 - -/* -#define SUBPIXEL_X -.5 -#define SUBPIXEL_Y -.5 -#define UNVIEWPORT_VARS GLfloat h = S3V_CONTEXT(ctx)->driDrawable->h -#define UNVIEWPORT_X(x) x - SUBPIXEL_X -#define UNVIEWPORT_Y(y) - y + h + SUBPIXEL_Y -#define UNVIEWPORT_Z(z) z / vmesa->depth_scale -*/ - -#define PTEX_FALLBACK() /* never needed */ - -#define IMPORT_QUALIFIER -#define IMPORT_FLOAT_COLORS s3v_import_float_colors -#define IMPORT_FLOAT_SPEC_COLORS s3v_import_float_spec_colors - -#define INTERP_VERTEX setup_tab[S3V_CONTEXT(ctx)->SetupIndex].interp -#define COPY_PV_VERTEX setup_tab[S3V_CONTEXT(ctx)->SetupIndex].copy_pv - - - -/*********************************************************************** - * Generate pv-copying and translation functions * - ***********************************************************************/ - -#define TAG(x) s3v_##x -#include "tnl_dd/t_dd_vb.c" - -/*********************************************************************** - * Generate vertex emit and interp functions * - ***********************************************************************/ - - -#define IND (S3V_XYZW_BIT|S3V_RGBA_BIT) -#define TAG(x) x##_wg -#include "tnl_dd/t_dd_vbtmp.h" - -#define IND (S3V_XYZW_BIT|S3V_RGBA_BIT|S3V_TEX0_BIT) -#define TAG(x) x##_wgt0 -#include "tnl_dd/t_dd_vbtmp.h" - -#define IND (S3V_XYZW_BIT|S3V_RGBA_BIT|S3V_TEX0_BIT|S3V_PTEX_BIT) -#define TAG(x) x##_wgpt0 -#include "tnl_dd/t_dd_vbtmp.h" - -#define IND (S3V_TEX0_BIT) -#define TAG(x) x##_t0 -#include "tnl_dd/t_dd_vbtmp.h" - -#define IND (S3V_RGBA_BIT) -#define TAG(x) x##_g -#include "tnl_dd/t_dd_vbtmp.h" - -#define IND (S3V_RGBA_BIT|S3V_TEX0_BIT) -#define TAG(x) x##_gt0 -#include "tnl_dd/t_dd_vbtmp.h" - -#define IND (S3V_XYZW_BIT|S3V_RGBA_BIT|S3V_FOG_BIT) -#define TAG(x) x##_wgf -#include "tnl_dd/t_dd_vbtmp.h" - -#define IND (S3V_XYZW_BIT|S3V_RGBA_BIT|S3V_FOG_BIT|S3V_TEX0_BIT) -#define TAG(x) x##_wgft0 -#include "tnl_dd/t_dd_vbtmp.h" - -#define IND (S3V_XYZW_BIT|S3V_RGBA_BIT|S3V_FOG_BIT|S3V_TEX0_BIT|S3V_PTEX_BIT) -#define TAG(x) x##_wgfpt0 -#include "tnl_dd/t_dd_vbtmp.h" - -#define IND (S3V_FOG_BIT) -#define TAG(x) x##_f -#include "tnl_dd/t_dd_vbtmp.h" - -#define IND (S3V_RGBA_BIT | S3V_FOG_BIT) -#define TAG(x) x##_gf -#include "tnl_dd/t_dd_vbtmp.h" - -#define IND (S3V_RGBA_BIT | S3V_FOG_BIT | S3V_TEX0_BIT) -#define TAG(x) x##_gft0 -#include "tnl_dd/t_dd_vbtmp.h" - -static void init_setup_tab( void ) -{ - init_wg(); /* pos + col */ - init_wgt0(); /* pos + col + tex0 */ - init_wgpt0(); /* pos + col + p-tex0 (?) */ - init_t0(); /* tex0 */ - init_g(); /* col */ - init_gt0(); /* col + tex */ - init_wgf(); - init_wgft0(); - init_wgfpt0(); - init_f(); - init_gf(); - init_gft0(); -} - - -#if 0 -void s3vPrintSetupFlags(char *msg, GLuint flags ) -{ - fprintf(stderr, "%s(%x): %s%s%s%s%s%s\n", - msg, - (int)flags, - (flags & S3V_XYZW_BIT) ? " xyzw," : "", - (flags & S3V_RGBA_BIT) ? " rgba," : "", - (flags & S3V_SPEC_BIT) ? " spec," : "", - (flags & S3V_FOG_BIT) ? " fog," : "", - (flags & S3V_TEX0_BIT) ? " tex-0," : "", - (flags & S3V_TEX1_BIT) ? " tex-1," : ""); -} -#endif - - -void s3vCheckTexSizes( GLcontext *ctx ) -{ - TNLcontext *tnl = TNL_CONTEXT(ctx); - s3vContextPtr vmesa = S3V_CONTEXT( ctx ); - - if (!setup_tab[vmesa->SetupIndex].check_tex_sizes(ctx)) { - - vmesa->SetupIndex |= (S3V_PTEX_BIT|S3V_RGBA_BIT); - - if (1 || !(ctx->_TriangleCaps & (DD_TRI_LIGHT_TWOSIDE|DD_TRI_UNFILLED))) { - tnl->Driver.Render.Interp = setup_tab[vmesa->SetupIndex].interp; - tnl->Driver.Render.CopyPV = setup_tab[vmesa->SetupIndex].copy_pv; - } - } -} - -void s3vBuildVertices( GLcontext *ctx, - GLuint start, - GLuint count, - GLuint newinputs ) -{ - s3vContextPtr vmesa = S3V_CONTEXT( ctx ); - GLubyte *v = ((GLubyte *)vmesa->verts + - (start<<vmesa->vertex_stride_shift)); - GLuint stride = 1<<vmesa->vertex_stride_shift; - - DEBUG(("*** s3vBuildVertices ***\n")); - DEBUG(("vmesa->SetupNewInputs = 0x%x\n", vmesa->SetupNewInputs)); - DEBUG(("vmesa->SetupIndex = 0x%x\n", vmesa->SetupIndex)); - -#if 1 - setup_tab[vmesa->SetupIndex].emit( ctx, start, count, v, stride ); -#else - newinputs |= vmesa->SetupNewInputs; - vmesa->SetupNewInputs = 0; - - DEBUG(("newinputs is 0x%x\n", newinputs)); - - if (!newinputs) { - DEBUG(("!newinputs\n")); - return; - } - - if (newinputs & VERT_CLIP) { - setup_tab[vmesa->SetupIndex].emit( ctx, start, count, v, stride ); - DEBUG(("newinputs & VERT_CLIP\n")); - return; - } /* else { */ -/* GLuint ind = 0; */ - - if (newinputs & VERT_RGBA) { - DEBUG(("newinputs & VERT_RGBA\n")); - ind |= S3V_RGBA_BIT; - } - - if (newinputs & VERT_TEX0) { - DEBUG(("newinputs & VERT_TEX0\n")); - ind |= S3V_TEX0_BIT; - } - - if (newinputs & VERT_FOG_COORD) - ind |= S3V_FOG_BIT; - - if (vmesa->SetupIndex & S3V_PTEX_BIT) - ind = ~0; - - ind &= vmesa->SetupIndex; - - DEBUG(("vmesa->SetupIndex = 0x%x\n", vmesa->SetupIndex)); - DEBUG(("ind = 0x%x\n", ind)); - DEBUG(("ind & vmesa->SetupIndex = 0x%x\n", (ind & vmesa->SetupIndex))); - - if (ind) { - setup_tab[ind].emit( ctx, start, count, v, stride ); - } -#endif -} - -void s3vChooseVertexState( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT( ctx ); - TNLcontext *tnl = TNL_CONTEXT(ctx); - - GLuint ind = S3V_XYZW_BIT | S3V_RGBA_BIT; - - /* FIXME: will segv in tnl_dd/t_dd_vbtmp.h (line 196) on some demos */ -/* - if (ctx->Fog.Enabled) - ind |= S3V_FOG_BIT; -*/ - - - if (ctx->Texture.Unit[0]._ReallyEnabled) { - _tnl_need_projected_coords( ctx, GL_FALSE ); - ind |= S3V_TEX0_BIT; - } else { - _tnl_need_projected_coords( ctx, GL_TRUE ); - } - - vmesa->SetupIndex = ind; - - if (ctx->_TriangleCaps & (DD_TRI_LIGHT_TWOSIDE|DD_TRI_UNFILLED)) { - tnl->Driver.Render.Interp = s3v_interp_extras; - tnl->Driver.Render.CopyPV = s3v_copy_pv_extras; - } else { - tnl->Driver.Render.Interp = setup_tab[ind].interp; - tnl->Driver.Render.CopyPV = setup_tab[ind].copy_pv; - } -} - - -void s3vInitVB( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - GLuint size = TNL_CONTEXT(ctx)->vb.Size; - - vmesa->verts = (char *)ALIGN_MALLOC(size * 4 * 16, 32); - - { - static int firsttime = 1; - if (firsttime) { - init_setup_tab(); - firsttime = 0; - vmesa->vertex_stride_shift = 6 /* 4 */; /* FIXME - only one vertex setup */ - } - } -} - - -void s3vFreeVB( GLcontext *ctx ) -{ - s3vContextPtr vmesa = S3V_CONTEXT(ctx); - if (vmesa->verts) { - ALIGN_FREE(vmesa->verts); - vmesa->verts = 0; - } - - if (vmesa->UbyteSecondaryColor.Ptr) { - ALIGN_FREE((void *)vmesa->UbyteSecondaryColor.Ptr); - vmesa->UbyteSecondaryColor.Ptr = 0; - } - - if (vmesa->UbyteColor.Ptr) { - ALIGN_FREE((void *)vmesa->UbyteColor.Ptr); - vmesa->UbyteColor.Ptr = 0; - } -} diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_vb.h b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_vb.h deleted file mode 100644 index b35d804e6..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_vb.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#ifndef S3VVB_INC -#define S3VVB_INC - -#include "mtypes.h" -#include "swrast/swrast.h" - -#define _S3V_NEW_VERTEX (_NEW_TEXTURE | \ - _DD_NEW_TRI_UNFILLED | \ - _DD_NEW_TRI_LIGHT_TWOSIDE) - - -extern void s3vChooseVertexState( GLcontext *ctx ); -extern void s3vCheckTexSizes( GLcontext *ctx ); -extern void s3vBuildVertices( GLcontext *ctx, - GLuint start, - GLuint count, - GLuint newinputs ); - - -extern void s3v_import_float_colors( GLcontext *ctx ); -extern void s3v_import_float_spec_colors( GLcontext *ctx ); - -extern void s3v_translate_vertex( GLcontext *ctx, - const s3vVertex *src, - SWvertex *dst ); - -extern void s3vInitVB( GLcontext *ctx ); -extern void s3vFreeVB( GLcontext *ctx ); - -extern void s3v_print_vertex( GLcontext *ctx, const s3vVertex *v ); -#if 0 -extern void s3vPrintSetupFlags(char *msg, GLuint flags ); -#endif - -#endif diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_xmesa.c b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_xmesa.c deleted file mode 100644 index 4cdda1b58..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3v_xmesa.c +++ /dev/null @@ -1,362 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#include "s3v_context.h" -#include "s3v_vb.h" -#include "context.h" -#include "matrix.h" -#include "s3v_dri.h" -#include "framebuffer.h" -#include "renderbuffer.h" - -#include "swrast/swrast.h" -#include "swrast_setup/swrast_setup.h" -#include "tnl/tnl.h" -#include "array_cache/acache.h" - -/* #define DEBUG(str) printf str */ - -static GLboolean -s3vInitDriver(__DRIscreenPrivate *sPriv) -{ - sPriv->private = (void *) s3vCreateScreen( sPriv ); - - if (!sPriv->private) { - s3vDestroyScreen( sPriv ); - return GL_FALSE; - } - - return GL_TRUE; -} - -static void -s3vDestroyContext(__DRIcontextPrivate *driContextPriv) -{ - s3vContextPtr vmesa = (s3vContextPtr)driContextPriv->driverPrivate; - - if (vmesa) { - _swsetup_DestroyContext( vmesa->glCtx ); - _tnl_DestroyContext( vmesa->glCtx ); - _ac_DestroyContext( vmesa->glCtx ); - _swrast_DestroyContext( vmesa->glCtx ); - - s3vFreeVB( vmesa->glCtx ); - - /* free the Mesa context */ - vmesa->glCtx->DriverCtx = NULL; - _mesa_destroy_context(vmesa->glCtx); - - _mesa_free(vmesa); - driContextPriv->driverPrivate = NULL; - } -} - - -static GLboolean -s3vCreateBuffer( __DRIscreenPrivate *driScrnPriv, - __DRIdrawablePrivate *driDrawPriv, - const __GLcontextModes *mesaVis, - GLboolean isPixmap ) -{ - s3vScreenPtr screen = (s3vScreenPtr) driScrnPriv->private; - - if (isPixmap) { - return GL_FALSE; /* not implemented */ - } - else { -#if 0 - driDrawPriv->driverPrivate = (void *) - _mesa_create_framebuffer(mesaVis, - GL_FALSE, /* software depth buffer? */ - mesaVis->stencilBits > 0, - mesaVis->accumRedBits > 0, - mesaVis->alphaBits > 0 - ); -#else - struct gl_framebuffer *fb = _mesa_create_framebuffer(mesaVis); - - { - driRenderbuffer *frontRb - = driNewRenderbuffer(GL_RGBA, screen->cpp, - screen->frontOffset, screen->frontPitch); - s3vSetSpanFunctions(frontRb, mesaVis); - _mesa_add_renderbuffer(fb, BUFFER_FRONT_LEFT, &frontRb->Base); - } - - if (mesaVis->doubleBufferMode) { - driRenderbuffer *backRb - = driNewRenderbuffer(GL_RGBA, screen->cpp, - screen->backOffset, screen->backPitch); - s3vSetSpanFunctions(backRb, mesaVis); - _mesa_add_renderbuffer(fb, BUFFER_BACK_LEFT, &backRb->Base); - } - - if (mesaVis->depthBits == 16) { - driRenderbuffer *depthRb - = driNewRenderbuffer(GL_DEPTH_COMPONENT16, screen->cpp, - screen->depthOffset, screen->depthPitch); - s3vSetSpanFunctions(depthRb, mesaVis); - _mesa_add_renderbuffer(fb, BUFFER_DEPTH, &depthRb->Base); - } - else if (mesaVis->depthBits == 24) { - driRenderbuffer *depthRb - = driNewRenderbuffer(GL_DEPTH_COMPONENT24, screen->cpp, - screen->depthOffset, screen->depthPitch); - s3vSetSpanFunctions(depthRb, mesaVis); - _mesa_add_renderbuffer(fb, BUFFER_DEPTH, &depthRb->Base); - } - - /* no h/w stencil yet? - if (mesaVis->stencilBits > 0) { - driRenderbuffer *stencilRb - = driNewRenderbuffer(GL_STENCIL_INDEX8_EXT); - s3vSetSpanFunctions(stencilRb, mesaVis); - _mesa_add_renderbuffer(fb, BUFFER_STENCIL, &stencilRb->Base); - } - */ - - _mesa_add_soft_renderbuffers(fb, - GL_FALSE, /* color */ - GL_FALSE, /* depth */ - mesaVis->stencilBits > 0, - mesaVis->accumRedBits > 0, - GL_FALSE, /* alpha */ - GL_FALSE /* aux */); - driDrawPriv->driverPrivate = (void *) fb; -#endif - return (driDrawPriv->driverPrivate != NULL); - } -} - - -static void -s3vDestroyBuffer(__DRIdrawablePrivate *driDrawPriv) -{ - _mesa_destroy_framebuffer((GLframebuffer *) (driDrawPriv->driverPrivate)); -} - -static void -s3vSwapBuffers(__DRIdrawablePrivate *drawablePrivate) -{ - __DRIdrawablePrivate *dPriv = (__DRIdrawablePrivate *) drawablePrivate; - __DRIscreenPrivate *sPriv; - GLcontext *ctx; - s3vContextPtr vmesa; - s3vScreenPtr s3vscrn; - - vmesa = (s3vContextPtr) dPriv->driContextPriv->driverPrivate; - sPriv = vmesa->driScreen; - s3vscrn = vmesa->s3vScreen; - ctx = vmesa->glCtx; - - DEBUG(("*** s3vSwapBuffers ***\n")); - -/* DMAFLUSH(); */ - - _mesa_notifySwapBuffers( ctx ); - - vmesa = (s3vContextPtr) dPriv->driContextPriv->driverPrivate; -/* driScrnPriv = vmesa->driScreen; */ - -/* if (vmesa->EnabledFlags & S3V_BACK_BUFFER) */ - -/* _mesa_notifySwapBuffers( ctx ); */ -#if 1 -{ - int x0, y0, x1, y1; -/* - int nRect = dPriv->numClipRects; - XF86DRIClipRectPtr pRect = dPriv->pClipRects; - - __DRIscreenPrivate *driScrnPriv = vmesa->driScreen; -*/ - -/* - DEBUG(("s3vSwapBuffers: S3V_BACK_BUFFER = 1 - nClip = %i\n", nRect)); -*/ -/* vmesa->drawOffset=vmesa->s3vScreen->backOffset; */ - - x0 = dPriv->x; - y0 = dPriv->y; - - x1 = x0 + dPriv->w - 1; - y1 = y0 + dPriv->h - 1; - - DMAOUT_CHECK(BITBLT_SRC_BASE, 15); - DMAOUT(vmesa->s3vScreen->backOffset); - DMAOUT(0); /* 0xc0000000 */ - DMAOUT( ((x0 << 16) | x1) ); - DMAOUT( ((y0 << 16) | y1) ); - DMAOUT( (vmesa->DestStride << 16) | vmesa->SrcStride ); - DMAOUT( (~(0)) ); - DMAOUT( (~(0)) ); - DMAOUT(0); - DMAOUT(0); - /* FIXME */ - DMAOUT(0); - DMAOUT(0); - DMAOUT( (0x01 | /* Autoexecute */ - 0x02 | /* clip */ - 0x04 | /* 16 bit */ - 0x20 | /* draw */ - 0x400 | /* word alignment (bit 10=1) */ - (0x2 << 11) | /* offset = 1 byte */ - (0xCC << 17) | /* rop #204 */ - (0x3 << 25)) ); /* l-r, t-b */ - DMAOUT(vmesa->ScissorWH); - DMAOUT( /* 0 */ vmesa->SrcXY ); - DMAOUT( (dPriv->x << 16) | dPriv->y ); - DMAFINISH(); - - DMAFLUSH(); - - vmesa->restore_primitive = -1; - -} -#endif -} - -static GLboolean -s3vMakeCurrent(__DRIcontextPrivate *driContextPriv, - __DRIdrawablePrivate *driDrawPriv, - __DRIdrawablePrivate *driReadPriv) -{ - int x1,x2,y1,y2; - int cx, cy, cw, ch; - unsigned int src_stride, dest_stride; - int cl; - - s3vContextPtr vmesa; - __DRIdrawablePrivate *dPriv = driDrawPriv; - vmesa = (s3vContextPtr) dPriv->driContextPriv->driverPrivate; - - DEBUG(("s3vMakeCurrent\n")); - - DEBUG(("dPriv->x=%i y=%i w=%i h=%i\n", dPriv->x, dPriv->y, - dPriv->w, dPriv->h)); - - if (driContextPriv) { - GET_CURRENT_CONTEXT(ctx); - s3vContextPtr oldVirgeCtx = ctx ? S3V_CONTEXT(ctx) : NULL; - s3vContextPtr newVirgeCtx = (s3vContextPtr) driContextPriv->driverPrivate; - - if ( newVirgeCtx != oldVirgeCtx ) { - - newVirgeCtx->dirty = ~0; - cl = 1; - DEBUG(("newVirgeCtx != oldVirgeCtx\n")); -/* s3vUpdateClipping(newVirgeCtx->glCtx ); */ - } - - if (newVirgeCtx->driDrawable != driDrawPriv) { - newVirgeCtx->driDrawable = driDrawPriv; - DEBUG(("driDrawable != driDrawPriv\n")); - s3vUpdateWindow ( newVirgeCtx->glCtx ); - s3vUpdateViewportOffset( newVirgeCtx->glCtx ); -/* s3vUpdateClipping(newVirgeCtx->glCtx ); */ - } -/* - s3vUpdateWindow ( newVirgeCtx->glCtx ); - s3vUpdateViewportOffset( newVirgeCtx->glCtx ); -*/ - -/* - _mesa_make_current( newVirgeCtx->glCtx, - (GLframebuffer *) driDrawPriv->driverPrivate, - (GLframebuffer *) driReadPriv->driverPrivate ); - - _mesa_set_viewport(newVirgeCtx->glCtx, 0, 0, - newVirgeCtx->driDrawable->w, - newVirgeCtx->driDrawable->h); -*/ - -#if 0 - newVirgeCtx->Window &= ~W_GIDMask; - newVirgeCtx->Window |= (driDrawPriv->index << 5); - CHECK_DMA_BUFFER(newVirgeCtx,1); - WRITE(newVirgeCtx->buf, S3VWindow, newVirgeCtx->Window); -#endif - - newVirgeCtx->new_state |= S3V_NEW_WINDOW; /* FIXME */ - - _mesa_make_current( newVirgeCtx->glCtx, - (GLframebuffer *) driDrawPriv->driverPrivate, - (GLframebuffer *) driReadPriv->driverPrivate ); - - if (!newVirgeCtx->glCtx->Viewport.Width) { - _mesa_set_viewport(newVirgeCtx->glCtx, 0, 0, - driDrawPriv->w, driDrawPriv->h); - -/* s3vUpdateClipping(newVirgeCtx->glCtx ); */ - } - -/* - if (cl) { - s3vUpdateClipping(newVirgeCtx->glCtx ); - cl =0; - } -*/ - - newVirgeCtx->new_state |= S3V_NEW_CLIP; - - if (1) { - cx = dPriv->x; - cw = dPriv->w; - cy = dPriv->y; - ch = dPriv->h; - } - - x1 = y1 = 0; - x2 = cw-1; - y2 = ch-1; - - /* src_stride = vmesa->s3vScreen->w * vmesa->s3vScreen->cpp; - dest_stride = ((x2+31)&~31) * vmesa->s3vScreen->cpp; */ - src_stride = vmesa->driScreen->fbWidth * 2; - dest_stride = ((x2+31)&~31) * 2; - } else { - _mesa_make_current( NULL, NULL, NULL ); - } - - return GL_TRUE; -} - - -static GLboolean -s3vUnbindContext( __DRIcontextPrivate *driContextPriv ) -{ - return GL_TRUE; -} - - -static struct __DriverAPIRec s3vAPI = { - s3vInitDriver, - s3vDestroyScreen, - s3vCreateContext, - s3vDestroyContext, - s3vCreateBuffer, - s3vDestroyBuffer, - s3vSwapBuffers, - s3vMakeCurrent, - s3vUnbindContext, -}; - - -#if 0 -/* - * This is the bootstrap function for the driver. - * The __driCreateScreen name is the symbol that libGL.so fetches. - * Return: pointer to a __DRIscreenPrivate. - */ -void *__driCreateScreen(Display *dpy, int scrn, __DRIscreen *psc, - int numConfigs, __GLXvisualConfig *config) -{ - __DRIscreenPrivate *psp=NULL; - - DEBUG(("__driCreateScreen: psp = %p\n", psp)); - psp = __driUtilCreateScreen(dpy, scrn, psc, numConfigs, config, &s3vAPI); - DEBUG(("__driCreateScreen: psp = %p\n", psp)); - return (void *) psp; -} -#endif diff --git a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3virgetri.h b/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3virgetri.h deleted file mode 100644 index 5519cfd74..000000000 --- a/nx-X11/extras/Mesa/src/mesa/drivers/dri/s3v/s3virgetri.h +++ /dev/null @@ -1,383 +0,0 @@ -/* - * Author: Max Lingua <sunmax@libero.it> - */ - -#define LOCAL_VARS \ - int vert0, vert1, vert2; \ - GLfloat y0, y1, y2, ydiff; \ - int iy0, iy1, iy2; \ - int x0, x1, x2, z0, z1, z2; \ - int dy01, dy02, dy12, dx01, dx02, dx12; \ - int delt02, delt01, delt12, end01, end12, start02; \ - int zstart, arstart, gbstart; \ - int deltzy, deltzx, deltarx, deltgbx, deltary, deltgby; \ - GLubyte (*colours)[4]; \ - GLubyte (*scolours)[4]; \ - static int tp = 0; \ - int tmp, lr - -#define LOCAL_TEX_VARS \ - int u0, u1, u2; \ - GLfloat ru0, ru1, ru2; \ - int v0, v1, v2; \ - GLfloat rv0, rv1, rv2; \ - GLfloat w0, w1, w2; \ - GLfloat rw0, rw1, rw2; \ - int baseu, basev; \ - int d0, d1, d2; \ - int deltdx, deltvx, deltux, deltdy, deltvy, deltuy; \ - int deltwx, deltwy; \ - int rbaseu, rbasev; \ - int dstart, ustart, wstart, vstart; \ - static int stmp = 0; \ - s3virgeTextureObject_t *t - -#define CULL_BACKFACE() \ - do { \ - GLfloat *w0 = VB->Win.data[e0]; \ - GLfloat *w1 = VB->Win.data[e1]; \ - GLfloat *w2 = VB->Win.data[e2]; \ - float cull; \ - cull = ctx->backface_sign * ((w1[0] - w0[0]) * (w0[1] - w2[1]) + \ - (w1[1] - w0[1]) * (w2[0] - w0[0])); \ - if (cull < 0) \ - return; \ - } while (0) - -#define SORT_VERTICES() \ - do { \ - y0 = VB->Win.data[e0][1]; \ - y1 = VB->Win.data[e1][1]; \ - y2 = VB->Win.data[e2][1]; \ - if (y1 > y0) { \ - if (y2 > y0) { \ - vert0 = e0; \ - if (y1 > y2) { vert2 = e1; vert1 = e2; } else { vert2 = e2; vert1 = e1; } \ - } else { vert0 = e2; vert1 = e0; vert2 = e1; } \ - } else { \ - if (y2 > y0) { vert0 = e1; vert1 = e0; vert2 = e2; } else { \ - vert2 = e0; \ - if (y2 > y1) { vert0 = e1; vert1 = e2; } else { vert0 = e2; vert1 = e1; } \ - } \ - } \ - } while (0) - -#define SET_VARIABLES() \ - do { \ - iy0 = y0 = ((s3virgeDB->height - (VB->Win.data[vert0][1]))); \ - iy1 = y1 = ((s3virgeDB->height - (VB->Win.data[vert1][1]))); \ - iy2 = y2 = ((s3virgeDB->height - (VB->Win.data[vert2][1]))); \ - if (iy0 == iy2) { return; } \ - ydiff = y0 - (float)iy0; \ - x0 = ((VB->Win.data[vert0][0]) * 1024.0 * 1024.0); \ - x1 = ((VB->Win.data[vert1][0]) * 1024.0 * 1024.0); \ - x2 = ((VB->Win.data[vert2][0]) * 1024.0 * 1024.0); \ - z0 = (VB->Win.data[vert0][2] * 1024.0 * 32.0); \ - z1 = (VB->Win.data[vert1][2] * 1024.0 * 32.0); \ - z2 = (VB->Win.data[vert2][2] * 1024.0 * 32.0); \ - dx12 = x2 - x1; \ - dy12 = iy1 - iy2; \ - dx01 = x1 - x0; \ - dy01 = iy0 - iy1; \ - dx02 = x2 - x0; \ - dy02 = iy0 - iy2; \ - delt12 = delt02 = delt01 = 0; \ - } while (0) - -#define SET_TEX_VARIABLES() \ - do { \ - t = ((s3virgeTextureObject_t *)ctx->Texture.Unit[0].Current->DriverData); \ - deltwx = deltwy = wstart = deltdx = deltdy = dstart = 0; \ - u0 = (VB->TexCoordPtr[0]->data[vert0][0] * (GLfloat)(t->tObj->Image[0]->Width) * 256.0); \ - u1 = (VB->TexCoordPtr[0]->data[vert1][0] * (GLfloat)(t->tObj->Image[0]->Width) * 256.0); \ - u2 = (VB->TexCoordPtr[0]->data[vert2][0] * (GLfloat)(t->tObj->Image[0]->Width) * 256.0); \ - v0 = (VB->TexCoordPtr[0]->data[vert0][1] * (GLfloat)(t->tObj->Image[0]->Height) * 256.0); \ - v1 = (VB->TexCoordPtr[0]->data[vert1][1] * (GLfloat)(t->tObj->Image[0]->Height) * 256.0); \ - v2 = (VB->TexCoordPtr[0]->data[vert2][1] * (GLfloat)(t->tObj->Image[0]->Height) * 256.0); \ - w0 = (VB->Win.data[vert0][3]); \ - w1 = (VB->Win.data[vert1][3]); \ - w2 = (VB->Win.data[vert2][3]); \ - } while (0) - -#define FLATSHADE_COLORS() \ - do { \ - GLubyte *col = &(colours[pv][0]); \ - deltarx = deltary = deltgbx = deltgby = 0; \ - gbstart = (((col[1]) << 23) | ((col[2]) << 7)); \ - arstart = (((col[3]) << 23) | ((col[0]) << 7)); \ - } while (0) - -#define GOURAUD_COLORS() \ - do { \ - int ctmp, ctmp2, ctmp3, ctmp4; \ - GLubyte *col0, *col1, *col2; \ - col0 = &(colours[vert0][0]); \ - col1 = &(colours[vert1][0]); \ - col2 = &(colours[vert2][0]); \ - ctmp = ((col2[3] - col0[3]) << 7) / dy02; \ - ctmp2 = ((col2[0] - col0[0]) << 7) / dy02; \ - deltary = ((ctmp << 16) & 0xFFFF0000) | (ctmp2 & 0xFFFF); \ - ctmp3 = ((col2[1] - col0[1]) << 7) / dy02; \ - ctmp4 = ((col2[2] - col0[2]) << 7) / dy02; \ - deltgby = ((ctmp3 << 16) & 0xFFFF0000) | (ctmp4 & 0xFFFF); \ - gbstart = (((int)((ydiff * ctmp3) + (col0[1] << 7)) << 16) & 0x7FFF0000) | \ - ((int)((ydiff * ctmp4) + (col0[2] << 7)) & 0x7FFF); \ - arstart = (((int)((ydiff * ctmp) + (col0[3] << 7)) << 16) & 0x7FFF0000) | \ - ((int)((ydiff * ctmp2) + (col0[0] << 7)) & 0x7FFF); \ - if (tmp) { \ - int ax, rx, gx, bx; \ - ax = ((col1[3] << 7) - (dy01 * ctmp + (col0[3] << 7))) / tmp; \ - rx = ((col1[0] << 7) - (dy01 * ctmp2 + (col0[0] << 7))) / tmp; \ - gx = ((col1[1] << 7) - (dy01 * ctmp3 + (col0[1] << 7))) / tmp; \ - bx = ((col1[2] << 7) - (dy01 * ctmp4 + (col0[2] << 7))) / tmp; \ - deltarx = ((ax << 16) & 0xFFFF0000) | (rx & 0xFFFF); \ - deltgbx = ((gx << 16) & 0xFFFF0000) | (bx & 0xFFFF); \ - } else { \ - deltgbx = deltarx = 0; \ - } \ - } while (0) - -#define SET_XY() \ - do { \ - delt02 = dx02 / dy02; \ - if (dy12) delt12 = dx12 / dy12; \ - if (dy01) delt01 = dx01 / dy01; \ - start02 = (ydiff * delt02) + x0; \ - end01 = (ydiff * delt01) + x0; \ - end12 = ((y1 - (GLfloat)iy1) * delt12) + x1; \ - } while (0) - -#define SET_DIR() \ - do { \ - tmp = x1 - (dy01 * delt02 + x0); \ - if (tmp > 0) { \ - lr = 0x80000000; \ - } else { \ - tmp *= -1; \ - lr = 0; \ - } \ - tmp >>= 20; \ - } while (0) - -#define SET_Z() \ - do { \ - deltzy = (z2 - z0) / dy02; \ - if (tmp) { \ - deltzx = (z1 - (dy01 * deltzy + z0)) / tmp; \ - } else { deltzx = 0; } \ - zstart = (deltzy * ydiff) + z0; \ - } while (0) - -#define SET_BASEUV() \ - do { \ - if (u0 < u1) { \ - if (u0 < u2) { \ - baseu = u0; \ - } else { \ - baseu = u2; \ - } \ - } else { \ - if (u1 < u2) { \ - baseu = u1; \ - } else { \ - baseu = u2; \ - } \ - } \ - if (v0 < v1) { \ - if (v0 < v2) { \ - basev = v0; \ - } else { \ - basev = v2; \ - } \ - } else { \ - if (v1 < v2) { \ - basev = v1; \ - } else { \ - basev = v2; \ - } \ - } \ - } while (0) - -#define SET_RW() \ - do { \ - /* GLfloat minW; \ - if (w0 < w1) { \ - if (w0 < w2) { \ - minW = w0; \ - } else { \ - minW = w2; \ - } \ - } else { \ - if (w1 < w2) { \ - minW = w1; \ - } else { \ - minW = w2; \ - } \ - } */ \ - rw0 = (512.0 * w0); \ - rw1 = (512.0 * w1); \ - rw2 = (512.0 * w2); \ - } while (0) - - -#define SET_D() \ - do { \ - GLfloat sxy, suv; \ - int lev; \ - suv = (VB->TexCoordPtr[0]->data[vert0][0] - \ - VB->TexCoordPtr[0]->data[vert2][0]) * \ - (VB->TexCoordPtr[0]->data[vert1][1] - \ - VB->TexCoordPtr[0]->data[vert2][1]) - \ - (VB->TexCoordPtr[0]->data[vert1][0] - \ - VB->TexCoordPtr[0]->data[vert2][0]) * \ - (VB->TexCoordPtr[0]->data[vert0][1] - \ - VB->TexCoordPtr[0]->data[vert2][2]); \ - sxy = (VB->Win.data[vert0][0] - \ - VB->Win.data[vert2][0]) * \ - (VB->Win.data[vert1][1] - \ - VB->Win.data[vert2][1]) - \ - (VB->Win.data[vert1][0] - \ - VB->Win.data[vert2][0]) * \ - (VB->Win.data[vert0][1] - \ - VB->Win.data[vert2][2]); \ - if (sxy < 0) sxy *= -1.0; \ - if (suv < 0) suv *= -1.0; \ - lev = *(int*)&suv - *(int *)&sxy; \ - if (lev < 0) \ - lev = 0; \ - else \ - lev >>=23; \ - dstart = (lev << 27); \ - } while (0) - - - -#define SET_UVWD() \ - do { \ - SET_BASEUV(); \ - SET_RW(); \ - SET_D(); \ - ru0 = (((u0 - baseu) * rw0)); \ - ru1 = (((u1 - baseu) * rw1)); \ - ru2 = (((u2 - baseu) * rw2)); \ - rv0 = (((v0 - basev) * rw0)); \ - rv1 = (((v1 - basev) * rw1)); \ - rv2 = (((v2 - basev) * rw2)); \ - while (baseu < 0) { baseu += (t->tObj->Image[0]->Width << 8); } \ - while (basev < 0) { basev += (t->tObj->Image[0]->Height << 8); } \ - if (!(baseu & 0xFF)) { baseu = (baseu >> 8); } else { baseu = (baseu >> 8) + 1; } \ - if ((basev & 0x80) || !(basev & 0xFF)) { basev = (basev >> 8); } else { basev = (basev >> 8) - 1; } \ - rbaseu = (baseu) << (16 - t->widthLog2); \ - rbasev = (basev) << (16 - t->widthLog2); \ - deltuy = (((ru2 - ru0) / dy02)); \ - deltvy = (((rv2 - rv0) / dy02)); \ - rw0 *= (1024.0 * 512.0); \ - rw1 *= (1024.0 * 512.0); \ - rw2 *= (1024.0 * 512.0); \ - deltwy = ((rw2 - rw0) / dy02); \ - if (tmp) { \ - deltux = ((ru1 - (dy01 * deltuy + ru0)) / tmp); \ - deltvx = ((rv1 - (dy01 * deltvy + rv0)) / tmp); \ - deltwx = ((rw1 - (dy01 * deltwy + rw0)) / tmp); \ - } else { deltux = deltvx = deltwx = 0; } \ - ustart = (deltuy * ydiff) + (ru0); \ - vstart = (deltvy * ydiff) + (rv0); \ - wstart = (deltwy * ydiff) + (rw0); \ - } while (0) - - -#define SEND_COLORS() \ - do { \ - WAITFIFOEMPTY(6); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_GBX), deltgbx); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_ARX), deltarx); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_GBY), deltgby); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_ARY), deltary); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_GS_BS), gbstart); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_AS_RS), arstart); \ - } while (0) - -#define SEND_VERTICES() \ - do { \ - WAITFIFOEMPTY(6); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_ZSTART), zstart); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_ZXD), deltzx); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_ZYD), deltzy); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_TXDELTA12), delt12); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_TXEND12), end12); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_TXDELTA01), delt01); \ - WAITFIFOEMPTY(5); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_TXEND01), end01); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_TXDELTA02), delt02); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_TXSTART02), start02); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_TYS), iy0); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_TY01_Y12), \ - ((((iy0 - iy1) & 0x7FF) << 16) | \ - ((iy1 - iy2) & 0x7FF) | lr)); \ - } while (0) - -#define SEND_UVWD() \ - do { \ - WAITFIFOEMPTY(7); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_BASEV), (rbasev & 0xFFFF)); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_BASEU), (0xa0000000 | (rbaseu & 0xFFFF))); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_WXD), deltwx); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_WYD), deltwy); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_WSTART), wstart); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_DXD), deltdx); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_VXD), deltvx); \ - WAITFIFOEMPTY(7); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_UXD), deltux); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_DYD), deltdy); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_VYD), deltvy); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_UYD), deltuy); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_DSTART), dstart); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_VSTART), vstart); \ - OUTREG( (S3VIRGE_3DTRI_REG | S3VIRGE_3DTRI_USTART), ustart); \ - } while (0) - -#define DMA_SEND_UVWD() \ - do { \ - DMAOUT((rbasev & 0xFFFF)); \ - DMAOUT((0xa0000000 | (rbaseu & 0xFFFF))); \ - DMAOUT(deltwx); \ - DMAOUT(deltwy); \ - DMAOUT(wstart); \ - DMAOUT(deltdx); \ - DMAOUT(deltvx); \ - DMAOUT(deltux); \ - DMAOUT(deltdy); \ - DMAOUT(deltvy); \ - DMAOUT(deltuy); \ - DMAOUT(dstart); \ - DMAOUT(vstart); \ - DMAOUT(ustart); \ - } while (0) - - -#define DMA_SEND_COLORS() \ - do { \ - DMAOUT(deltgbx); \ - DMAOUT(deltarx); \ - DMAOUT(deltgby); \ - DMAOUT(deltary); \ - DMAOUT(gbstart); \ - DMAOUT(arstart); \ - } while (0) - -#define DMA_SEND_VERTICES() \ - do { \ - DMAOUT(deltzx); \ - DMAOUT(deltzy); \ - DMAOUT(zstart); \ - DMAOUT(delt12); \ - DMAOUT(end12); \ - DMAOUT(delt01); \ - DMAOUT(end01); \ - DMAOUT(delt02); \ - DMAOUT(start02); \ - DMAOUT(iy0); \ - DMAOUT(((((iy0 - iy1) & 0x7FF) << 16) | \ - ((iy1 - iy2) & 0x7FF) | lr)); \ - } while (0) - |