diff options
Diffstat (limited to 'nx-X11/extras/Mesa_6.4.1/src/glu/sgi/libtess/tessmono.c')
-rw-r--r-- | nx-X11/extras/Mesa_6.4.1/src/glu/sgi/libtess/tessmono.c | 208 |
1 files changed, 208 insertions, 0 deletions
diff --git a/nx-X11/extras/Mesa_6.4.1/src/glu/sgi/libtess/tessmono.c b/nx-X11/extras/Mesa_6.4.1/src/glu/sgi/libtess/tessmono.c new file mode 100644 index 000000000..77fe0ac61 --- /dev/null +++ b/nx-X11/extras/Mesa_6.4.1/src/glu/sgi/libtess/tessmono.c @@ -0,0 +1,208 @@ +/* +** License Applicability. Except to the extent portions of this file are +** made subject to an alternative license as permitted in the SGI Free +** Software License B, Version 1.1 (the "License"), the contents of this +** file are subject only to the provisions of the License. You may not use +** this file except in compliance with the License. You may obtain a copy +** of the License at Silicon Graphics, Inc., attn: Legal Services, 1600 +** Amphitheatre Parkway, Mountain View, CA 94043-1351, or at: +** +** http://oss.sgi.com/projects/FreeB +** +** Note that, as provided in the License, the Software is distributed on an +** "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS +** DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND +** CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A +** PARTICULAR PURPOSE, AND NON-INFRINGEMENT. +** +** Original Code. The Original Code is: OpenGL Sample Implementation, +** Version 1.2.1, released January 26, 2000, developed by Silicon Graphics, +** Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc. +** Copyright in any portions created by third parties is as indicated +** elsewhere herein. All Rights Reserved. +** +** Additional Notice Provisions: The application programming interfaces +** established by SGI in conjunction with the Original Code are The +** OpenGL(R) Graphics System: A Specification (Version 1.2.1), released +** April 1, 1999; The OpenGL(R) Graphics System Utility Library (Version +** 1.3), released November 4, 1998; and OpenGL(R) Graphics with the X +** Window System(R) (Version 1.3), released October 19, 1998. This software +** was created using the OpenGL(R) version 1.2.1 Sample Implementation +** published by SGI, but has not been independently verified as being +** compliant with the OpenGL(R) version 1.2.1 Specification. +** +*/ +/* +** Author: Eric Veach, July 1994. +** +** $Date: 2001/03/17 00:25:41 $ $Revision: 1.1 $ +** $Header: /home/krh/git/sync/mesa-cvs-repo/Mesa/src/glu/sgi/libtess/tessmono.c,v 1.1 2001/03/17 00:25:41 brianp Exp $ +*/ + +#include "gluos.h" +#include <stdlib.h> +#include "geom.h" +#include "mesh.h" +#include "tessmono.h" +#include <assert.h> + +#define AddWinding(eDst,eSrc) (eDst->winding += eSrc->winding, \ + eDst->Sym->winding += eSrc->Sym->winding) + +/* __gl_meshTessellateMonoRegion( face ) tessellates a monotone region + * (what else would it do??) The region must consist of a single + * loop of half-edges (see mesh.h) oriented CCW. "Monotone" in this + * case means that any vertical line intersects the interior of the + * region in a single interval. + * + * Tessellation consists of adding interior edges (actually pairs of + * half-edges), to split the region into non-overlapping triangles. + * + * The basic idea is explained in Preparata and Shamos (which I don''t + * have handy right now), although their implementation is more + * complicated than this one. The are two edge chains, an upper chain + * and a lower chain. We process all vertices from both chains in order, + * from right to left. + * + * The algorithm ensures that the following invariant holds after each + * vertex is processed: the untessellated region consists of two + * chains, where one chain (say the upper) is a single edge, and + * the other chain is concave. The left vertex of the single edge + * is always to the left of all vertices in the concave chain. + * + * Each step consists of adding the rightmost unprocessed vertex to one + * of the two chains, and forming a fan of triangles from the rightmost + * of two chain endpoints. Determining whether we can add each triangle + * to the fan is a simple orientation test. By making the fan as large + * as possible, we restore the invariant (check it yourself). + */ +int __gl_meshTessellateMonoRegion( GLUface *face ) +{ + GLUhalfEdge *up, *lo; + + /* All edges are oriented CCW around the boundary of the region. + * First, find the half-edge whose origin vertex is rightmost. + * Since the sweep goes from left to right, face->anEdge should + * be close to the edge we want. + */ + up = face->anEdge; + assert( up->Lnext != up && up->Lnext->Lnext != up ); + + for( ; VertLeq( up->Dst, up->Org ); up = up->Lprev ) + ; + for( ; VertLeq( up->Org, up->Dst ); up = up->Lnext ) + ; + lo = up->Lprev; + + while( up->Lnext != lo ) { + if( VertLeq( up->Dst, lo->Org )) { + /* up->Dst is on the left. It is safe to form triangles from lo->Org. + * The EdgeGoesLeft test guarantees progress even when some triangles + * are CW, given that the upper and lower chains are truly monotone. + */ + while( lo->Lnext != up && (EdgeGoesLeft( lo->Lnext ) + || EdgeSign( lo->Org, lo->Dst, lo->Lnext->Dst ) <= 0 )) { + GLUhalfEdge *tempHalfEdge= __gl_meshConnect( lo->Lnext, lo ); + if (tempHalfEdge == NULL) return 0; + lo = tempHalfEdge->Sym; + } + lo = lo->Lprev; + } else { + /* lo->Org is on the left. We can make CCW triangles from up->Dst. */ + while( lo->Lnext != up && (EdgeGoesRight( up->Lprev ) + || EdgeSign( up->Dst, up->Org, up->Lprev->Org ) >= 0 )) { + GLUhalfEdge *tempHalfEdge= __gl_meshConnect( up, up->Lprev ); + if (tempHalfEdge == NULL) return 0; + up = tempHalfEdge->Sym; + } + up = up->Lnext; + } + } + + /* Now lo->Org == up->Dst == the leftmost vertex. The remaining region + * can be tessellated in a fan from this leftmost vertex. + */ + assert( lo->Lnext != up ); + while( lo->Lnext->Lnext != up ) { + GLUhalfEdge *tempHalfEdge= __gl_meshConnect( lo->Lnext, lo ); + if (tempHalfEdge == NULL) return 0; + lo = tempHalfEdge->Sym; + } + + return 1; +} + + +/* __gl_meshTessellateInterior( mesh ) tessellates each region of + * the mesh which is marked "inside" the polygon. Each such region + * must be monotone. + */ +int __gl_meshTessellateInterior( GLUmesh *mesh ) +{ + GLUface *f, *next; + + /*LINTED*/ + for( f = mesh->fHead.next; f != &mesh->fHead; f = next ) { + /* Make sure we don''t try to tessellate the new triangles. */ + next = f->next; + if( f->inside ) { + if ( !__gl_meshTessellateMonoRegion( f ) ) return 0; + } + } + + return 1; +} + + +/* __gl_meshDiscardExterior( mesh ) zaps (ie. sets to NULL) all faces + * which are not marked "inside" the polygon. Since further mesh operations + * on NULL faces are not allowed, the main purpose is to clean up the + * mesh so that exterior loops are not represented in the data structure. + */ +void __gl_meshDiscardExterior( GLUmesh *mesh ) +{ + GLUface *f, *next; + + /*LINTED*/ + for( f = mesh->fHead.next; f != &mesh->fHead; f = next ) { + /* Since f will be destroyed, save its next pointer. */ + next = f->next; + if( ! f->inside ) { + __gl_meshZapFace( f ); + } + } +} + +#define MARKED_FOR_DELETION 0x7fffffff + +/* __gl_meshSetWindingNumber( mesh, value, keepOnlyBoundary ) resets the + * winding numbers on all edges so that regions marked "inside" the + * polygon have a winding number of "value", and regions outside + * have a winding number of 0. + * + * If keepOnlyBoundary is TRUE, it also deletes all edges which do not + * separate an interior region from an exterior one. + */ +int __gl_meshSetWindingNumber( GLUmesh *mesh, int value, + GLboolean keepOnlyBoundary ) +{ + GLUhalfEdge *e, *eNext; + + for( e = mesh->eHead.next; e != &mesh->eHead; e = eNext ) { + eNext = e->next; + if( e->Rface->inside != e->Lface->inside ) { + + /* This is a boundary edge (one side is interior, one is exterior). */ + e->winding = (e->Lface->inside) ? value : -value; + } else { + + /* Both regions are interior, or both are exterior. */ + if( ! keepOnlyBoundary ) { + e->winding = 0; + } else { + if ( !__gl_meshDelete( e ) ) return 0; + } + } + } + return 1; +} |