diff options
Diffstat (limited to 'nx-X11/extras/Mesa_6.4.2/src/glu/sgi/libutil/glue.c')
-rw-r--r-- | nx-X11/extras/Mesa_6.4.2/src/glu/sgi/libutil/glue.c | 100 |
1 files changed, 100 insertions, 0 deletions
diff --git a/nx-X11/extras/Mesa_6.4.2/src/glu/sgi/libutil/glue.c b/nx-X11/extras/Mesa_6.4.2/src/glu/sgi/libutil/glue.c new file mode 100644 index 000000000..a0471bbe2 --- /dev/null +++ b/nx-X11/extras/Mesa_6.4.2/src/glu/sgi/libutil/glue.c @@ -0,0 +1,100 @@ +/* +** License Applicability. Except to the extent portions of this file are +** made subject to an alternative license as permitted in the SGI Free +** Software License B, Version 1.1 (the "License"), the contents of this +** file are subject only to the provisions of the License. You may not use +** this file except in compliance with the License. You may obtain a copy +** of the License at Silicon Graphics, Inc., attn: Legal Services, 1600 +** Amphitheatre Parkway, Mountain View, CA 94043-1351, or at: +** +** http://oss.sgi.com/projects/FreeB +** +** Note that, as provided in the License, the Software is distributed on an +** "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS +** DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND +** CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A +** PARTICULAR PURPOSE, AND NON-INFRINGEMENT. +** +** Original Code. The Original Code is: OpenGL Sample Implementation, +** Version 1.2.1, released January 26, 2000, developed by Silicon Graphics, +** Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc. +** Copyright in any portions created by third parties is as indicated +** elsewhere herein. All Rights Reserved. +** +** Additional Notice Provisions: The application programming interfaces +** established by SGI in conjunction with the Original Code are The +** OpenGL(R) Graphics System: A Specification (Version 1.2.1), released +** April 1, 1999; The OpenGL(R) Graphics System Utility Library (Version +** 1.3), released November 4, 1998; and OpenGL(R) Graphics with the X +** Window System(R) (Version 1.3), released October 19, 1998. This software +** was created using the OpenGL(R) version 1.2.1 Sample Implementation +** published by SGI, but has not been independently verified as being +** compliant with the OpenGL(R) version 1.2.1 Specification. +** +** $Date: 2001/09/24 09:40:40 $ $Revision: 1.3 $ +** $Header: /home/krh/git/sync/mesa-cvs-repo/Mesa/src/glu/sgi/libutil/glue.c,v 1.3 2001/09/24 09:40:40 joukj Exp $ +*/ + +#include <stdlib.h> +#include "gluint.h" + +static unsigned char *__gluNurbsErrors[] = { + (unsigned char*) " ", + (unsigned char*) "spline order un-supported", + (unsigned char*) "too few knots", + (unsigned char*) "valid knot range is empty", + (unsigned char*) "decreasing knot sequence knot", + (unsigned char*) "knot multiplicity greater than order of spline", + (unsigned char*) "gluEndCurve() must follow gluBeginCurve()", + (unsigned char*) "gluBeginCurve() must precede gluEndCurve()", + (unsigned char*) "missing or extra geometric data", + (unsigned char*) "can't draw piecewise linear trimming curves", + (unsigned char*) "missing or extra domain data", + (unsigned char*) "missing or extra domain data", + (unsigned char*) "gluEndTrim() must precede gluEndSurface()", + (unsigned char*) "gluBeginSurface() must precede gluEndSurface()", + (unsigned char*) "curve of improper type passed as trim curve", + (unsigned char*) "gluBeginSurface() must precede gluBeginTrim()", + (unsigned char*) "gluEndTrim() must follow gluBeginTrim()", + (unsigned char*) "gluBeginTrim() must precede gluEndTrim()", + (unsigned char*) "invalid or missing trim curve", + (unsigned char*) "gluBeginTrim() must precede gluPwlCurve()", + (unsigned char*) "piecewise linear trimming curve referenced twice", + (unsigned char*) "piecewise linear trimming curve and nurbs curve mixed", + (unsigned char*) "improper usage of trim data type", + (unsigned char*) "nurbs curve referenced twice", + (unsigned char*) "nurbs curve and piecewise linear trimming curve mixed", + (unsigned char*) "nurbs surface referenced twice", + (unsigned char*) "invalid property", + (unsigned char*) "gluEndSurface() must follow gluBeginSurface()", + (unsigned char*) "intersecting or misoriented trim curves", + (unsigned char*) "intersecting trim curves", + (unsigned char*) "UNUSED", + (unsigned char*) "unconnected trim curves", + (unsigned char*) "unknown knot error", + (unsigned char*) "negative vertex count encountered", + (unsigned char*) "negative byte-stride encounteed", + (unsigned char*) "unknown type descriptor", + (unsigned char*) "null control point reference", + (unsigned char*) "duplicate point on piecewise linear trimming curve", +}; + +const unsigned char *__gluNURBSErrorString( int errnum ) +{ + return __gluNurbsErrors[errnum]; +} + +static unsigned char *__gluTessErrors[] = { + (unsigned char*) " ", + (unsigned char*) "gluTessBeginPolygon() must precede a gluTessEndPolygon()", + (unsigned char*) "gluTessBeginContour() must precede a gluTessEndContour()", + (unsigned char*) "gluTessEndPolygon() must follow a gluTessBeginPolygon()", + (unsigned char*) "gluTessEndContour() must follow a gluTessBeginContour()", + (unsigned char*) "a coordinate is too large", + (unsigned char*) "need combine callback", +}; + +const unsigned char *__gluTessErrorString( int errnum ) +{ + return __gluTessErrors[errnum]; +} /* __glTessErrorString() */ |