diff options
Diffstat (limited to 'nx-X11/extras/expat/bcb5/README.txt')
| -rw-r--r-- | nx-X11/extras/expat/bcb5/README.txt | 86 |
1 files changed, 0 insertions, 86 deletions
diff --git a/nx-X11/extras/expat/bcb5/README.txt b/nx-X11/extras/expat/bcb5/README.txt deleted file mode 100644 index 50ac811a5..000000000 --- a/nx-X11/extras/expat/bcb5/README.txt +++ /dev/null @@ -1,86 +0,0 @@ - - Using a Borland compiler product - -The files in this directory support using both the free Borland command-line -compiler tools and the Borland C++ Builder IDE. The project files have been -tested with both versions 5 and 6 of the C++ Builder product. - - Using the free BCC32 command line compiler - -After downloading and installing the free C++ Builder commandline version, -perform the following steps (assuming it was installed under C:\Borland\BCC55): - -1) Add "C:\Borland\BCC55\BIN" to your path -2) Set the environment variable BCB to "C:\Borland\BCC55". -3) edit makefile.mak: enable or comment out the appropriate commands under - clean & distclean, depending on whether your OS can use deltree /y or - del /s/f/q. - -After that, you should simply cd to the bcb5 directory in your Expat directory -tree (same structure as CVS) and run "make all" or just "make". - - Naming - -The libraries have the base name "libexpat" followed optionally by an "s" -(static) or a "w" (unicode version), then an underscore and optionally -"mt" (multi-threaded) and "d" (dynamic RTL). - -To change the name of the library a project file produces, edit the project -option source (see step 1 under Unicode below) and change the name contained in -the PROJECT tag. In a make file, change the value assigned to the PROJECT -variable. Also, the LIBRARY entry in the .def file has to be changed to -correspond to the new executable name. - - - Unicode Considerations - -There are no facilities in the BCB 5 GUI to create a unicode-enabled -application. Fortunately, it is not hard to do by hand. - -1. The startup .obj system file must be changed to the unicode version. - Go to Project|Edit Option Source, and scroll down to the ALLOBJ tag. Change - c0x32.obj to c0x32w.obj. Editing this file can be quirky, but usually the - following kludge will make the change stick. Close and save the file - (CTRL-F4) then open the options dialog (CTRL-Shift-F11), then click OK on - the dialog immediately without changing anything in it. If this doesn't work, - you will have to close the project completely and edit the .bpr file by hand. - - If you are using a make file, just change the startup .obj file assigned - to the ALLOBJ variable. - -2. Add the macro define XML_UNICODE_WCHAR_T. In the GUI that goes in the options - dialog, Directories/Conditionals tab, in the Conditional define box. In a - make file, put it in the USERDEFINES variable. - -3. Of course, your code has to be written for unicode. As a start, the "main" - function is called "wmain". The tchar macros are an interesting way to - write code that can easily switch between unicode and utf-8. If these macros - are used, then simply adding the conditional define _UNICODE as well as - XML_UNICODE_WCHAR_T will bring in the unicode versions of the tchar macros. - Otherwise the utf-8 versions are used. xmlwf uses its own versions of the - tchar macros which are switched on and off by the XML_UNICODE macro, which - itself is set by the XML_UNICODE_WCHAR_T define. - - Threading - -The libexpat libraries are all built with the multi-threaded dynamic RTL's. -To create single-threaded libs, do the following: - -1. The compiler option for multi-threading must be turned off. Following the - instructions above to edit the option source, remove the -tWM option from - the CFLAG1 tag. In a make file, remove it from the CFLAG1 variable. - -2. The single threaded RTL must be called. change the RTL in the ALLLIB tag or - variable (GUI or makefile repectively) to the version without the "mt" in the - name. For example, change cw32mti.lib to cw32i.lib. - - Static RTL's - -To build the libs with static RTL's do the following, - -1. For the static expatlibs, in the Tlib tab on the options dialog, uncheck the - "Use dynamic RTL" box. For the dynamic expatlibs, in the Linker tab on the - options dialog, uncheck "Use dynamic RTL". If you are using a make file, - remove the _RTLDLL assignment to the SYSDEFINES variable, and change the RTL - to the version without an "i" in the ALLLIB variable. For example, - cw32mti.lib would become cw32mt.lib. |