diff options
Diffstat (limited to 'nx-X11/extras/expat/bcb5')
26 files changed, 0 insertions, 2745 deletions
diff --git a/nx-X11/extras/expat/bcb5/README.txt b/nx-X11/extras/expat/bcb5/README.txt deleted file mode 100644 index 50ac811a5..000000000 --- a/nx-X11/extras/expat/bcb5/README.txt +++ /dev/null @@ -1,86 +0,0 @@ - - Using a Borland compiler product - -The files in this directory support using both the free Borland command-line -compiler tools and the Borland C++ Builder IDE. The project files have been -tested with both versions 5 and 6 of the C++ Builder product. - - Using the free BCC32 command line compiler - -After downloading and installing the free C++ Builder commandline version, -perform the following steps (assuming it was installed under C:\Borland\BCC55): - -1) Add "C:\Borland\BCC55\BIN" to your path -2) Set the environment variable BCB to "C:\Borland\BCC55". -3) edit makefile.mak: enable or comment out the appropriate commands under - clean & distclean, depending on whether your OS can use deltree /y or - del /s/f/q. - -After that, you should simply cd to the bcb5 directory in your Expat directory -tree (same structure as CVS) and run "make all" or just "make". - - Naming - -The libraries have the base name "libexpat" followed optionally by an "s" -(static) or a "w" (unicode version), then an underscore and optionally -"mt" (multi-threaded) and "d" (dynamic RTL). - -To change the name of the library a project file produces, edit the project -option source (see step 1 under Unicode below) and change the name contained in -the PROJECT tag. In a make file, change the value assigned to the PROJECT -variable. Also, the LIBRARY entry in the .def file has to be changed to -correspond to the new executable name. - - - Unicode Considerations - -There are no facilities in the BCB 5 GUI to create a unicode-enabled -application. Fortunately, it is not hard to do by hand. - -1. The startup .obj system file must be changed to the unicode version. - Go to Project|Edit Option Source, and scroll down to the ALLOBJ tag. Change - c0x32.obj to c0x32w.obj. Editing this file can be quirky, but usually the - following kludge will make the change stick. Close and save the file - (CTRL-F4) then open the options dialog (CTRL-Shift-F11), then click OK on - the dialog immediately without changing anything in it. If this doesn't work, - you will have to close the project completely and edit the .bpr file by hand. - - If you are using a make file, just change the startup .obj file assigned - to the ALLOBJ variable. - -2. Add the macro define XML_UNICODE_WCHAR_T. In the GUI that goes in the options - dialog, Directories/Conditionals tab, in the Conditional define box. In a - make file, put it in the USERDEFINES variable. - -3. Of course, your code has to be written for unicode. As a start, the "main" - function is called "wmain". The tchar macros are an interesting way to - write code that can easily switch between unicode and utf-8. If these macros - are used, then simply adding the conditional define _UNICODE as well as - XML_UNICODE_WCHAR_T will bring in the unicode versions of the tchar macros. - Otherwise the utf-8 versions are used. xmlwf uses its own versions of the - tchar macros which are switched on and off by the XML_UNICODE macro, which - itself is set by the XML_UNICODE_WCHAR_T define. - - Threading - -The libexpat libraries are all built with the multi-threaded dynamic RTL's. -To create single-threaded libs, do the following: - -1. The compiler option for multi-threading must be turned off. Following the - instructions above to edit the option source, remove the -tWM option from - the CFLAG1 tag. In a make file, remove it from the CFLAG1 variable. - -2. The single threaded RTL must be called. change the RTL in the ALLLIB tag or - variable (GUI or makefile repectively) to the version without the "mt" in the - name. For example, change cw32mti.lib to cw32i.lib. - - Static RTL's - -To build the libs with static RTL's do the following, - -1. For the static expatlibs, in the Tlib tab on the options dialog, uncheck the - "Use dynamic RTL" box. For the dynamic expatlibs, in the Linker tab on the - options dialog, uncheck "Use dynamic RTL". If you are using a make file, - remove the _RTLDLL assignment to the SYSDEFINES variable, and change the RTL - to the version without an "i" in the ALLLIB variable. For example, - cw32mti.lib would become cw32mt.lib. diff --git a/nx-X11/extras/expat/bcb5/elements.bpf b/nx-X11/extras/expat/bcb5/elements.bpf deleted file mode 100644 index 5c1e878d6..000000000 --- a/nx-X11/extras/expat/bcb5/elements.bpf +++ /dev/null @@ -1,4 +0,0 @@ -USEUNIT("..\examples\elements.c"); -USELIB("Release\libexpats_mtd.lib"); -//--------------------------------------------------------------------------- -main diff --git a/nx-X11/extras/expat/bcb5/elements.bpr b/nx-X11/extras/expat/bcb5/elements.bpr deleted file mode 100644 index c21c0f59f..000000000 --- a/nx-X11/extras/expat/bcb5/elements.bpr +++ /dev/null @@ -1,149 +0,0 @@ -<?xml version='1.0' encoding='utf-8' ?> -<!-- C++Builder XML Project --> -<PROJECT> - <MACROS> - <VERSION value="BCB.05.03"/> - <PROJECT value="Release\elements.exe"/> - <OBJFILES value="Release\obj\examples\elements.obj"/> - <RESFILES value=""/> - <IDLFILES value=""/> - <IDLGENFILES value=""/> - <DEFFILE value=""/> - <RESDEPEN value="$(RESFILES)"/> - <LIBFILES value="Release\libexpats_mtd.lib"/> - <LIBRARIES value=""/> - <SPARELIBS value=""/> - <PACKAGES value="VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi - ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi - VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi - dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi"/> - <PATHCPP value=".;..\examples"/> - <PATHPAS value=".;"/> - <PATHRC value=".;"/> - <PATHASM value=".;"/> - <DEBUGLIBPATH value="$(BCB)\lib\debug"/> - <RELEASELIBPATH value="$(BCB)\lib\release"/> - <LINKER value="ilink32"/> - <USERDEFINES value="WIN32;NDEBUG;_CONSOLE;XML_STATIC"/> - <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/> - <MAINSOURCE value="elements.bpf"/> - <INCLUDEPATH value="..\examples;$(BCB)\include"/> - <LIBPATH value="..\examples;$(BCB)\lib;$(RELEASELIBPATH)"/> - <WARNINGS value="-w-par -w-8027 -w-8026"/> - </MACROS> - <OPTIONS> - <IDLCFLAGS value="-I$(BCB)\include"/> - <CFLAG1 value="-O2 -X- -a8 -b -k- -vi -q -tWM -I..\lib -c"/> - <PFLAGS value="-N2Release\obj\examples -N0Release\obj\examples -$Y- -$L- -$D-"/> - <RFLAGS value="/l 0x409 /d "NDEBUG" /i$(BCB)\include"/> - <AFLAGS value="/mx /w2 /zn"/> - <LFLAGS value="-IRelease\obj\examples -D"" -ap -Tpe -x -Gn -q -L..\LIB\RELEASE_STATIC"/> - </OPTIONS> - <LINKER> - <ALLOBJ value="c0x32.obj $(OBJFILES)"/> - <ALLRES value="$(RESFILES)"/> - <ALLLIB value="$(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib"/> - </LINKER> - <IDEOPTIONS> -[Version Info] -IncludeVerInfo=0 -AutoIncBuild=0 -MajorVer=1 -MinorVer=0 -Release=0 -Build=0 -Debug=0 -PreRelease=0 -Special=0 -Private=0 -DLL=0 -Locale=1033 -CodePage=1252 - -[Version Info Keys] -CompanyName= -FileDescription= -FileVersion=1.0.0.0 -InternalName= -LegalCopyright= -LegalTrademarks= -OriginalFilename= -ProductName= -ProductVersion=1.0.0.0 -Comments= - -[HistoryLists\hlIncludePath] -Count=4 -Item0=..\examples;$(BCB)\include -Item1=$(BCB)\include -Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl -Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl; - -[HistoryLists\hlLibraryPath] -Count=8 -Item0=..\examples;$(BCB)\lib;$(RELEASELIBPATH) -Item1=..\examples;$(BCB)\lib;..\examples\$(RELEASELIBPATH) -Item2=$(BCB)\lib;$(RELEASELIBPATH) -Item3=$(BCB)\lib;$(RELEASELIBPATH);..\lib\Release-w_static -Item4=$(BCB)\lib;$(RELEASELIBPATH);..\lib\Release_static -Item5=$(BCB)\lib;$(RELEASELIBPATH);C:\src\expat\lib\Release_static -Item6=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk -Item7=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk; - -[HistoryLists\hlDebugSourcePath] -Count=1 -Item0=$(BCB)\source\vcl - -[HistoryLists\hlConditionals] -Count=17 -Item0=WIN32;NDEBUG;_CONSOLE;XML_STATIC -Item1=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_STATIC -Item2=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE;XML_STATIC -Item3=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE -Item4=WIN32;NDEBUG;_CONSOLE;_DEBUG -Item5=WIN32;NDEBUG;_CONSOLE;XML_STATIC;_DEBUG -Item6=WIN32;NDEBUG;_CONSOLE;XML_STATIC;_DEBUG;_UNICODE -Item7=WIN32;NDEBUG;_CONSOLE;XML_STATIC;_DEBUG;XML_UNICODE_WCHAR_T -Item8=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG;XML_UNICODE_WCHAR_T -Item9=WIN32;NDEBUG;_CONSOLE;_UNICODE;XML_STATIC;_DEBUG;XML_UNICODE_WCHAR_T -Item10=WIN32;NDEBUG;_CONSOLE;_UNICODE;XML_STATIC;_DEBUG;XML_UNICODE -Item11=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG;XML_UNICODE_WCHAR_T;__WCHAR_T -Item12=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE -Item13=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG;XML_UNICODE;_UNICODE -Item14=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG;XML_UNICODE -Item15=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG -Item16=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC - -[HistoryLists\hlIntOutputDir] -Count=5 -Item0=Release\obj\examples -Item1=Release\obj\elements -Item2=Release\obj\mts -Item3=..\examples\Release -Item4=Release - -[HistoryLists\hlFinalOutputDir] -Count=1 -Item0=Release\ - -[Debugging] -DebugSourceDirs= - -[Parameters] -RunParams= -HostApplication= -RemoteHost= -RemotePath= -RemoteDebug=0 - -[Compiler] -ShowInfoMsgs=0 -LinkDebugVcl=0 -LinkCGLIB=0 - -[Language] -ActiveLang= -ProjectLang= -RootDir= - </IDEOPTIONS> -</PROJECT>
\ No newline at end of file diff --git a/nx-X11/extras/expat/bcb5/elements.mak b/nx-X11/extras/expat/bcb5/elements.mak deleted file mode 100644 index d4427fd51..000000000 --- a/nx-X11/extras/expat/bcb5/elements.mak +++ /dev/null @@ -1,186 +0,0 @@ -# --------------------------------------------------------------------------- -!if !$d(BCB) -BCB = $(MAKEDIR)\.. -!endif - -# --------------------------------------------------------------------------- -# IDE SECTION -# --------------------------------------------------------------------------- -# The following section of the project makefile is managed by the BCB IDE. -# It is recommended to use the IDE to change any of the values in this -# section. -# --------------------------------------------------------------------------- - -VERSION = BCB.05.03 -# --------------------------------------------------------------------------- -PROJECT = Release\elements.exe -OBJFILES = Release\obj\examples\elements.obj -RESFILES = -MAINSOURCE = elements.bpf -RESDEPEN = $(RESFILES) -LIBFILES = Release\libexpats_mtd.lib -IDLFILES = -IDLGENFILES = -LIBRARIES = -PACKAGES = VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi \ - ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi \ - VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi \ - dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi -SPARELIBS = -DEFFILE = -# --------------------------------------------------------------------------- -PATHCPP = .;..\examples -PATHASM = .; -PATHPAS = .; -PATHRC = .; -DEBUGLIBPATH = $(BCB)\lib\debug -RELEASELIBPATH = $(BCB)\lib\release -USERDEFINES = WIN32;NDEBUG;_CONSOLE;XML_STATIC -SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL -INCLUDEPATH = ..\examples;$(BCB)\include -LIBPATH = ..\examples;$(BCB)\lib;$(RELEASELIBPATH) -WARNINGS= -w-par -w-8027 -w-8026 -# --------------------------------------------------------------------------- -CFLAG1 = -O2 -X- -a8 -b -k- -vi -q -I..\lib -c -IDLCFLAGS = -I$(BCB)\include -PFLAGS = -N2Release\obj\examples -N0Release\obj\examples -$Y- -$L- -$D- -RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include -AFLAGS = /mx /w2 /zn -LFLAGS = -IRelease\obj\examples -D"" -ap -Tpe -x -Gn -q -L..\LIB\RELEASE_STATIC -# --------------------------------------------------------------------------- -ALLOBJ = c0x32.obj $(OBJFILES) -ALLRES = $(RESFILES) -ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib -# --------------------------------------------------------------------------- -!ifdef IDEOPTIONS - -[Version Info] -IncludeVerInfo=0 -AutoIncBuild=0 -MajorVer=1 -MinorVer=0 -Release=0 -Build=0 -Debug=0 -PreRelease=0 -Special=0 -Private=0 -DLL=0 - -[Version Info Keys] -CompanyName= -FileDescription= -FileVersion=1.0.0.0 -InternalName= -LegalCopyright= -LegalTrademarks= -OriginalFilename= -ProductName= -ProductVersion=1.0.0.0 -Comments= - -[Debugging] -DebugSourceDirs=$(BCB)\source\vcl - -!endif - - - - - -# --------------------------------------------------------------------------- -# MAKE SECTION -# --------------------------------------------------------------------------- -# This section of the project file is not used by the BCB IDE. It is for -# the benefit of building from the command-line using the MAKE utility. -# --------------------------------------------------------------------------- - -.autodepend -# --------------------------------------------------------------------------- -!if "$(USERDEFINES)" != "" -AUSERDEFINES = -d$(USERDEFINES:;= -d) -!else -AUSERDEFINES = -!endif - -!if !$d(BCC32) -BCC32 = bcc32 -!endif - -!if !$d(CPP32) -CPP32 = cpp32 -!endif - -!if !$d(DCC32) -DCC32 = dcc32 -!endif - -!if !$d(TASM32) -TASM32 = tasm32 -!endif - -!if !$d(LINKER) -LINKER = ilink32 -!endif - -!if !$d(BRCC32) -BRCC32 = brcc32 -!endif - - -# --------------------------------------------------------------------------- -!if $d(PATHCPP) -.PATH.CPP = $(PATHCPP) -.PATH.C = $(PATHCPP) -!endif - -!if $d(PATHPAS) -.PATH.PAS = $(PATHPAS) -!endif - -!if $d(PATHASM) -.PATH.ASM = $(PATHASM) -!endif - -!if $d(PATHRC) -.PATH.RC = $(PATHRC) -!endif -# --------------------------------------------------------------------------- -$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE) - $(BCB)\BIN\$(LINKER) @&&! - $(LFLAGS) -L$(LIBPATH) + - $(ALLOBJ), + - $(PROJECT),, + - $(ALLLIB), + - $(DEFFILE), + - $(ALLRES) -! -# --------------------------------------------------------------------------- -.pas.hpp: - $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< } - -.pas.obj: - $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< } - -.cpp.obj: - $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< } - -.c.obj: - $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< } - -.c.i: - $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< } - -.cpp.i: - $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< } - -.asm.obj: - $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@ - -.rc.res: - $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $< -# --------------------------------------------------------------------------- - - - - diff --git a/nx-X11/extras/expat/bcb5/expat.bpf b/nx-X11/extras/expat/bcb5/expat.bpf deleted file mode 100644 index 2c423283f..000000000 --- a/nx-X11/extras/expat/bcb5/expat.bpf +++ /dev/null @@ -1,6 +0,0 @@ -USEUNIT("..\lib\xmlparse.c"); -USEUNIT("..\lib\xmlrole.c"); -USEUNIT("..\lib\xmltok.c"); -USEDEF("libexpat_mtd.def"); -//--------------------------------------------------------------------------- -#define DllEntryPoint diff --git a/nx-X11/extras/expat/bcb5/expat.bpr b/nx-X11/extras/expat/bcb5/expat.bpr deleted file mode 100644 index 291b8cafc..000000000 --- a/nx-X11/extras/expat/bcb5/expat.bpr +++ /dev/null @@ -1,140 +0,0 @@ -<?xml version='1.0' encoding='utf-8' ?> -<!-- C++Builder XML Project --> -<PROJECT> - <MACROS> - <VERSION value="BCB.05.03"/> - <PROJECT value="Release\libexpat_mtd.dll"/> - <OBJFILES value="Release\obj\libexpat\xmlparse.obj Release\obj\libexpat\xmlrole.obj - Release\obj\libexpat\xmltok.obj"/> - <RESFILES value=""/> - <IDLFILES value=""/> - <IDLGENFILES value=""/> - <DEFFILE value="libexpat_mtd.def"/> - <RESDEPEN value="$(RESFILES)"/> - <LIBFILES value=""/> - <LIBRARIES value=""/> - <SPARELIBS value=""/> - <PACKAGES value="VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi - ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi - VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi - dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi"/> - <PATHCPP value=".;..\lib"/> - <PATHPAS value=".;"/> - <PATHRC value=".;"/> - <PATHASM value=".;"/> - <DEBUGLIBPATH value="$(BCB)\lib\debug"/> - <RELEASELIBPATH value="$(BCB)\lib\release"/> - <LINKER value="ilink32"/> - <USERDEFINES value="_WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS"/> - <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/> - <MAINSOURCE value="expat.bpf"/> - <INCLUDEPATH value="..\lib;$(BCB)\include"/> - <LIBPATH value="..\lib;$(BCB)\lib;$(RELEASELIBPATH)"/> - <WARNINGS value="-w-rch -w-par -w-8027 -w-8026 -w-ccc"/> - </MACROS> - <OPTIONS> - <IDLCFLAGS value="-I$(BCB)\include"/> - <CFLAG1 value="-WD -O2 -X- -a8 -b -k- -vi -q -tWM -c -tWD"/> - <PFLAGS value="-N2Release\obj\libexpat -N0Release\obj\libexpat -$Y- -$L- -$D-"/> - <RFLAGS value="/l 0x409 /d "NDEBUG" /i$(BCB)\include"/> - <AFLAGS value="/mx /w2 /zn"/> - <LFLAGS value="-IRelease\obj\libexpat -D"" -aa -Tpd -x -Gn -Gi -q"/> - </OPTIONS> - <LINKER> - <ALLOBJ value="c0d32.obj $(OBJFILES)"/> - <ALLRES value="$(RESFILES)"/> - <ALLLIB value="$(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib"/> - </LINKER> - <IDEOPTIONS> -[Version Info] -IncludeVerInfo=0 -AutoIncBuild=0 -MajorVer=1 -MinorVer=0 -Release=0 -Build=0 -Debug=0 -PreRelease=0 -Special=0 -Private=0 -DLL=0 -Locale=1033 -CodePage=1252 - -[Version Info Keys] -CompanyName= -FileDescription= -FileVersion=1.0.0.0 -InternalName= -LegalCopyright= -LegalTrademarks= -OriginalFilename= -ProductName= -ProductVersion=1.0.0.0 -Comments= - -[HistoryLists\hlIncludePath] -Count=4 -Item0=..\lib;$(BCB)\include -Item1=$(BCB)\include -Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl -Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl; - -[HistoryLists\hlLibraryPath] -Count=5 -Item0=..\lib;$(BCB)\lib;$(RELEASELIBPATH) -Item1=..\lib;$(BCB)\lib;..\lib\$(RELEASELIBPATH) -Item2=$(BCB)\lib;$(RELEASELIBPATH) -Item3=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk -Item4=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk; - -[HistoryLists\hlDebugSourcePath] -Count=1 -Item0=$(BCB)\source\vcl - -[HistoryLists\hlConditionals] -Count=8 -Item0=_WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS -Item1=_WINDOWS;WIN32;NDEBUG;_DEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS -Item2=WIN32;_WINDOWS;NDEBUG;_DEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS -Item3=WIN32;_WINDOWS;NDEBUG;_DEBUG;_USRDLL;EXPAT_EXPORTS;COMPILED_FROM_DSP -Item4=NDEBUG;WIN32;_WINDOWS;_USRDLL;_DEBUG;EXPAT_EXPORTS;COMPILED_FROM_DSP -Item5=NDEBUG;WIN32;_WINDOWS;_USRDLL;EXPAT_EXPORTS;COMPILED_FROM_DSP;_DEBUG -Item6=NDEBUG;WIN32;_WINDOWS;_MBCS;_USRDLL;EXPAT_EXPORTS;COMPILED_FROM_DSP;_DEBUG -Item7=NDEBUG;WIN32;_WINDOWS;_MBCS;_USRDLL;EXPAT_EXPORTS;COMPILED_FROM_DSP - -[HistoryLists\hlIntOutputDir] -Count=7 -Item0=Release\obj\libexpat -Item1=Release\obj\libexpat_static -Item2=Release\obj\mtd -Item3=Release\obj\mt -Item4=Release\obj -Item5=Release -Item6=..\lib\Release - -[HistoryLists\hlFinalOutputDir] -Count=1 -Item0=Release\ - -[Debugging] -DebugSourceDirs= - -[Parameters] -RunParams= -HostApplication= -RemoteHost= -RemotePath= -RemoteDebug=0 - -[Compiler] -ShowInfoMsgs=0 -LinkDebugVcl=0 -LinkCGLIB=0 - -[Language] -ActiveLang= -ProjectLang= -RootDir= - </IDEOPTIONS> -</PROJECT>
\ No newline at end of file diff --git a/nx-X11/extras/expat/bcb5/expat.mak b/nx-X11/extras/expat/bcb5/expat.mak deleted file mode 100644 index 68e19db31..000000000 --- a/nx-X11/extras/expat/bcb5/expat.mak +++ /dev/null @@ -1,187 +0,0 @@ -# --------------------------------------------------------------------------- -!if !$d(BCB) -BCB = $(MAKEDIR)\.. -!endif - -# --------------------------------------------------------------------------- -# IDE SECTION -# --------------------------------------------------------------------------- -# The following section of the project makefile is managed by the BCB IDE. -# It is recommended to use the IDE to change any of the values in this -# section. -# --------------------------------------------------------------------------- - -VERSION = BCB.05.03 -# --------------------------------------------------------------------------- -PROJECT = Release\libexpat_mtd.dll -OBJFILES = Release\obj\libexpat\xmlparse.obj Release\obj\libexpat\xmlrole.obj \ - Release\obj\libexpat\xmltok.obj -RESFILES = -MAINSOURCE = expat.bpf -RESDEPEN = $(RESFILES) -LIBFILES = -IDLFILES = -IDLGENFILES = -LIBRARIES = -PACKAGES = VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi \ - ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi \ - VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi \ - dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi -SPARELIBS = -DEFFILE = libexpat_mtd.def -# --------------------------------------------------------------------------- -PATHCPP = .;..\lib -PATHASM = .; -PATHPAS = .; -PATHRC = .; -DEBUGLIBPATH = $(BCB)\lib\debug -RELEASELIBPATH = $(BCB)\lib\release -USERDEFINES = _WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS -SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL -INCLUDEPATH = ..\lib;$(BCB)\include -LIBPATH = ..\lib;$(BCB)\lib;$(RELEASELIBPATH) -WARNINGS= -w-rch -w-par -w-8027 -w-8026 -w-ccc -# --------------------------------------------------------------------------- -CFLAG1 = -WD -O2 -X- -a8 -b -k- -vi -q -tWM -c -tWD -IDLCFLAGS = -I$(BCB)\include -PFLAGS = -N2Release\obj\libexpat -N0Release\obj\libexpat -$Y- -$L- -$D- -RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include -AFLAGS = /mx /w2 /zn -LFLAGS = -IRelease\obj\libexpat -D"" -aa -Tpd -x -Gn -Gi -q -# --------------------------------------------------------------------------- -ALLOBJ = c0d32.obj $(OBJFILES) -ALLRES = $(RESFILES) -ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib -# --------------------------------------------------------------------------- -!ifdef IDEOPTIONS - -[Version Info] -IncludeVerInfo=0 -AutoIncBuild=0 -MajorVer=1 -MinorVer=0 -Release=0 -Build=0 -Debug=0 -PreRelease=0 -Special=0 -Private=0 -DLL=0 - -[Version Info Keys] -CompanyName= -FileDescription= -FileVersion=1.0.0.0 -InternalName= -LegalCopyright= -LegalTrademarks= -OriginalFilename= -ProductName= -ProductVersion=1.0.0.0 -Comments= - -[Debugging] -DebugSourceDirs=$(BCB)\source\vcl - -!endif - - - - - -# --------------------------------------------------------------------------- -# MAKE SECTION -# --------------------------------------------------------------------------- -# This section of the project file is not used by the BCB IDE. It is for -# the benefit of building from the command-line using the MAKE utility. -# --------------------------------------------------------------------------- - -.autodepend -# --------------------------------------------------------------------------- -!if "$(USERDEFINES)" != "" -AUSERDEFINES = -d$(USERDEFINES:;= -d) -!else -AUSERDEFINES = -!endif - -!if !$d(BCC32) -BCC32 = bcc32 -!endif - -!if !$d(CPP32) -CPP32 = cpp32 -!endif - -!if !$d(DCC32) -DCC32 = dcc32 -!endif - -!if !$d(TASM32) -TASM32 = tasm32 -!endif - -!if !$d(LINKER) -LINKER = ilink32 -!endif - -!if !$d(BRCC32) -BRCC32 = brcc32 -!endif - - -# --------------------------------------------------------------------------- -!if $d(PATHCPP) -.PATH.CPP = $(PATHCPP) -.PATH.C = $(PATHCPP) -!endif - -!if $d(PATHPAS) -.PATH.PAS = $(PATHPAS) -!endif - -!if $d(PATHASM) -.PATH.ASM = $(PATHASM) -!endif - -!if $d(PATHRC) -.PATH.RC = $(PATHRC) -!endif -# --------------------------------------------------------------------------- -$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE) - $(BCB)\BIN\$(LINKER) @&&! - $(LFLAGS) -L$(LIBPATH) + - $(ALLOBJ), + - $(PROJECT),, + - $(ALLLIB), + - $(DEFFILE), + - $(ALLRES) -! -# --------------------------------------------------------------------------- -.pas.hpp: - $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< } - -.pas.obj: - $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< } - -.cpp.obj: - $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< } - -.c.obj: - $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< } - -.c.i: - $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< } - -.cpp.i: - $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< } - -.asm.obj: - $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@ - -.rc.res: - $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $< -# --------------------------------------------------------------------------- - - - - diff --git a/nx-X11/extras/expat/bcb5/expat_static.bpf b/nx-X11/extras/expat/bcb5/expat_static.bpf deleted file mode 100644 index 5ca458edc..000000000 --- a/nx-X11/extras/expat/bcb5/expat_static.bpf +++ /dev/null @@ -1,5 +0,0 @@ -USEUNIT("..\lib\xmlparse.c"); -USEUNIT("..\lib\xmlrole.c"); -USEUNIT("..\lib\xmltok.c"); -//--------------------------------------------------------------------------- -#define Library diff --git a/nx-X11/extras/expat/bcb5/expat_static.bpr b/nx-X11/extras/expat/bcb5/expat_static.bpr deleted file mode 100644 index 2f6ec4d3b..000000000 --- a/nx-X11/extras/expat/bcb5/expat_static.bpr +++ /dev/null @@ -1,143 +0,0 @@ -<?xml version='1.0' encoding='utf-8' ?> -<!-- C++Builder XML Project --> -<PROJECT> - <MACROS> - <VERSION value="BCB.05.03"/> - <PROJECT value="Release\libexpats_mtd.lib"/> - <OBJFILES value="Release\obj\libexpat_static\xmlparse.obj - Release\obj\libexpat_static\xmlrole.obj - Release\obj\libexpat_static\xmltok.obj"/> - <RESFILES value=""/> - <IDLFILES value=""/> - <IDLGENFILES value=""/> - <DEFFILE value=""/> - <RESDEPEN value="$(RESFILES)"/> - <LIBFILES value=""/> - <LIBRARIES value=""/> - <SPARELIBS value=""/> - <PACKAGES value=""/> - <PATHCPP value=".;..\lib"/> - <PATHPAS value=".;"/> - <PATHRC value=".;"/> - <PATHASM value=".;"/> - <DEBUGLIBPATH value="$(BCB)\lib\debug"/> - <RELEASELIBPATH value="$(BCB)\lib\release"/> - <LINKER value="TLib"/> - <USERDEFINES value="_WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC"/> - <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/> - <MAINSOURCE value="expat_static.bpf"/> - <INCLUDEPATH value="..\lib;$(BCB)\include"/> - <LIBPATH value="..\lib;$(BCB)\lib;$(RELEASELIBPATH)"/> - <WARNINGS value="-w-rch -w-par -w-8027 -w-8026 -w-ccc"/> - <LISTFILE value=""/> - </MACROS> - <OPTIONS> - <IDLCFLAGS value="-I$(BCB)\include"/> - <CFLAG1 value="-O2 -X- -a8 -b -k- -vi -q -tWM -c"/> - <PFLAGS value="-N2Release\obj\libexpat_static -N0Release\obj\libexpat_static -$Y- -$L- -$D-"/> - <RFLAGS value="/l 0x409 /d "NDEBUG" /i$(BCB)\include"/> - <AFLAGS value="/mx /w2 /zn"/> - <LFLAGS value=""/> - </OPTIONS> - <LINKER> - <ALLOBJ value="$(OBJFILES)"/> - <ALLRES value="$(RESFILES)"/> - <ALLLIB value="$(LIBFILES) $(LIBRARIES)"/> - </LINKER> - <IDEOPTIONS> -[Version Info] -IncludeVerInfo=0 -AutoIncBuild=0 -MajorVer=1 -MinorVer=0 -Release=0 -Build=0 -Debug=0 -PreRelease=0 -Special=0 -Private=0 -DLL=0 -Locale=1033 -CodePage=1252 - -[Version Info Keys] -CompanyName= -FileDescription= -FileVersion=1.0.0.0 -InternalName= -LegalCopyright= -LegalTrademarks= -OriginalFilename= -ProductName= -ProductVersion=1.0.0.0 -Comments= - -[HistoryLists\hlIncludePath] -Count=4 -Item0=..\lib;$(BCB)\include -Item1=$(BCB)\include -Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl -Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl; - -[HistoryLists\hlLibraryPath] -Count=5 -Item0=..\lib;$(BCB)\lib;$(RELEASELIBPATH) -Item1=..\lib;$(BCB)\lib;..\lib\$(RELEASELIBPATH) -Item2=$(BCB)\lib;$(RELEASELIBPATH) -Item3=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk -Item4=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk; - -[HistoryLists\hlDebugSourcePath] -Count=1 -Item0=$(BCB)\source\vcl - -[HistoryLists\hlConditionals] -Count=7 -Item0=_WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC -Item1=_WINDOWS;WIN32;NDEBUG;_DEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC -Item2=WIN32;_WINDOWS;NDEBUG;_DEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC -Item3=WIN32;_WINDOWS;NDEBUG;_LIB;COMPILED_FROM_DSP;_DEBUG -Item4=WIN32;_WINDOWS;NDEBUG;_LIB;COMPILED_FROM_DSP -Item5=WIN32;_WINDOWS;NDEBUG;_LIB;COMPILED_FROM_DSP;_MBCS -Item6=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP - -[HistoryLists\hlIntOutputDir] -Count=6 -Item0=Release\obj\libexpat_static -Item1=Release\obj\mts -Item2=Release\obj\mt -Item3=Release -Item4=..\lib\Release_static -Item5=Release_static - -[HistoryLists\hlFinalOutputDir] -Count=3 -Item0=Release\ -Item1=Release -Item2=Release_static\ - -[HistoryLists\hlTlibPageSize] -Count=1 -Item0=0x0010 - -[Debugging] -DebugSourceDirs= - -[Parameters] -RunParams= -HostApplication= -RemoteHost= -RemotePath= -RemoteDebug=0 - -[Compiler] -ShowInfoMsgs=0 -LinkDebugVcl=0 -LinkCGLIB=0 - -[Language] -ActiveLang= -ProjectLang= -RootDir= - </IDEOPTIONS> -</PROJECT>
\ No newline at end of file diff --git a/nx-X11/extras/expat/bcb5/expat_static.mak b/nx-X11/extras/expat/bcb5/expat_static.mak deleted file mode 100644 index 9137d3b53..000000000 --- a/nx-X11/extras/expat/bcb5/expat_static.mak +++ /dev/null @@ -1,189 +0,0 @@ -# --------------------------------------------------------------------------- -!if !$d(BCB) -BCB = $(MAKEDIR)\.. -!endif - -# --------------------------------------------------------------------------- -# IDE SECTION -# --------------------------------------------------------------------------- -# The following section of the project makefile is managed by the BCB IDE. -# It is recommended to use the IDE to change any of the values in this -# section. -# --------------------------------------------------------------------------- - -VERSION = BCB.05.03 -# --------------------------------------------------------------------------- -PROJECT = Release\libexpats_mtd.lib -OBJFILES = Release\obj\libexpat_static\xmlparse.obj \ - Release\obj\libexpat_static\xmlrole.obj \ - Release\obj\libexpat_static\xmltok.obj -RESFILES = -MAINSOURCE = expat_static.bpf -RESDEPEN = $(RESFILES) -LIBFILES = -IDLFILES = -IDLGENFILES = -LIBRARIES = -PACKAGES = -SPARELIBS = -DEFFILE = -# --------------------------------------------------------------------------- -PATHCPP = .;..\lib -PATHASM = .; -PATHPAS = .; -PATHRC = .; -LINKER = TLib -DEBUGLIBPATH = $(BCB)\lib\debug -RELEASELIBPATH = $(BCB)\lib\release -USERDEFINES = _WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC -SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL -INCLUDEPATH = ..\lib;$(BCB)\include -LIBPATH = ..\lib;$(BCB)\lib;$(RELEASELIBPATH) -WARNINGS = -w-rch -w-par -w-8027 -w-8026 -w-ccc -LISTFILE = -# --------------------------------------------------------------------------- -CFLAG1 = -O2 -X- -a8 -b -k- -vi -q -tWM -c -IDLCFLAGS = -I$(BCB)\include -PFLAGS = -N2Release\obj\libexpat_static -N0Release\obj\libexpat_static -$Y- -$L- -$D- -RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include -AFLAGS = /mx /w2 /zn -LFLAGS = -# --------------------------------------------------------------------------- -ALLOBJ = $(OBJFILES) -ALLRES = $(RESFILES) -ALLLIB = $(LIBFILES) $(LIBRARIES) -# --------------------------------------------------------------------------- -!ifdef IDEOPTIONS - -[Version Info] -IncludeVerInfo=0 -AutoIncBuild=0 -MajorVer=1 -MinorVer=0 -Release=0 -Build=0 -Debug=0 -PreRelease=0 -Special=0 -Private=0 -DLL=0 - -[Version Info Keys] -CompanyName= -FileDescription= -FileVersion=1.0.0.0 -InternalName= -LegalCopyright= -LegalTrademarks= -OriginalFilename= -ProductName= -ProductVersion=1.0.0.0 -Comments= - -[Debugging] -DebugSourceDirs=$(BCB)\source\vcl - -!endif - - - - - -# --------------------------------------------------------------------------- -# MAKE SECTION -# --------------------------------------------------------------------------- -# This section of the project file is not used by the BCB IDE. It is for -# the benefit of building from the command-line using the MAKE utility. -# --------------------------------------------------------------------------- - -.autodepend -# --------------------------------------------------------------------------- -!if "$(USERDEFINES)" != "" -AUSERDEFINES = -d$(USERDEFINES:;= -d) -!else -AUSERDEFINES = -!endif - -!if !$d(BCC32) -BCC32 = bcc32 -!endif - -!if !$d(CPP32) -CPP32 = cpp32 -!endif - -!if !$d(DCC32) -DCC32 = dcc32 -!endif - -!if !$d(TASM32) -TASM32 = tasm32 -!endif - -!if !$d(LINKER) -LINKER = TLib -!endif - -!if !$d(BRCC32) -BRCC32 = brcc32 -!endif - - -# --------------------------------------------------------------------------- -!if $d(PATHCPP) -.PATH.CPP = $(PATHCPP) -.PATH.C = $(PATHCPP) -!endif - -!if $d(PATHPAS) -.PATH.PAS = $(PATHPAS) -!endif - -!if $d(PATHASM) -.PATH.ASM = $(PATHASM) -!endif - -!if $d(PATHRC) -.PATH.RC = $(PATHRC) -!endif -# --------------------------------------------------------------------------- -!if "$(LISTFILE)" == "" -COMMA = -!else -COMMA = , -!endif - -$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE) - $(BCB)\BIN\$(LINKER) /u $@ @&&! - $(LFLAGS) $? $(COMMA) $(LISTFILE) - -! -# --------------------------------------------------------------------------- -.pas.hpp: - $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< } - -.pas.obj: - $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< } - -.cpp.obj: - $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< } - -.c.obj: - $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< } - -.c.i: - $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< } - -.cpp.i: - $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< } - -.asm.obj: - $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@ - -.rc.res: - $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $< -# --------------------------------------------------------------------------- - - - - diff --git a/nx-X11/extras/expat/bcb5/expatw.bpf b/nx-X11/extras/expat/bcb5/expatw.bpf deleted file mode 100644 index 188a6d54e..000000000 --- a/nx-X11/extras/expat/bcb5/expatw.bpf +++ /dev/null @@ -1,6 +0,0 @@ -USEUNIT("..\lib\xmlparse.c"); -USEUNIT("..\lib\xmlrole.c"); -USEUNIT("..\lib\xmltok.c"); -USEDEF("libexpatw_mtd.def"); -//--------------------------------------------------------------------------- -#define DllEntryPoint diff --git a/nx-X11/extras/expat/bcb5/expatw.bpr b/nx-X11/extras/expat/bcb5/expatw.bpr deleted file mode 100644 index 9ec50010b..000000000 --- a/nx-X11/extras/expat/bcb5/expatw.bpr +++ /dev/null @@ -1,146 +0,0 @@ -<?xml version='1.0' encoding='utf-8' ?> -<!-- C++Builder XML Project --> -<PROJECT> - <MACROS> - <VERSION value="BCB.05.03"/> - <PROJECT value="Release\libexpatw_mtd.dll"/> - <OBJFILES value="Release\obj\libexpatw\xmlparse.obj Release\obj\libexpatw\xmlrole.obj - Release\obj\libexpatw\xmltok.obj"/> - <RESFILES value=""/> - <IDLFILES value=""/> - <IDLGENFILES value=""/> - <DEFFILE value="libexpatw_mtd.def"/> - <RESDEPEN value="$(RESFILES)"/> - <LIBFILES value=""/> - <LIBRARIES value=""/> - <SPARELIBS value=""/> - <PACKAGES value="VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi - ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi - VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi - dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi"/> - <PATHCPP value=".;..\lib"/> - <PATHPAS value=".;"/> - <PATHRC value=".;"/> - <PATHASM value=".;"/> - <DEBUGLIBPATH value="$(BCB)\lib\debug"/> - <RELEASELIBPATH value="$(BCB)\lib\release"/> - <LINKER value="ilink32"/> - <USERDEFINES value="_WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T"/> - <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/> - <MAINSOURCE value="expatw.bpf"/> - <INCLUDEPATH value="..\lib;$(BCB)\include"/> - <LIBPATH value="..\lib;$(BCB)\lib;$(RELEASELIBPATH)"/> - <WARNINGS value="-w-rch -w-par -w-8027 -w-8026 -w-ccc"/> - </MACROS> - <OPTIONS> - <IDLCFLAGS value="-I$(BCB)\include"/> - <CFLAG1 value="-WD -O2 -X- -a8 -b -k- -vi -q -tWM -c -tWD"/> - <PFLAGS value="-N2Release\obj\libexpatw -N0Release\obj\libexpatw -$Y- -$L- -$D-"/> - <RFLAGS value="/l 0x409 /d "NDEBUG" /i$(BCB)\include"/> - <AFLAGS value="/mx /w2 /zn"/> - <LFLAGS value="-IRelease\obj\libexpatw -D"" -aa -Tpd -x -Gn -Gi -w -q"/> - </OPTIONS> - <LINKER> - <ALLOBJ value="c0d32w.obj $(OBJFILES)"/> - <ALLRES value="$(RESFILES)"/> - <ALLLIB value="$(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib"/> - </LINKER> - <IDEOPTIONS> -[Version Info] -IncludeVerInfo=0 -AutoIncBuild=0 -MajorVer=1 -MinorVer=0 -Release=0 -Build=0 -Debug=0 -PreRelease=0 -Special=0 -Private=0 -DLL=0 -Locale=1033 -CodePage=1252 - -[Version Info Keys] -CompanyName= -FileDescription= -FileVersion=1.0.0.0 -InternalName= -LegalCopyright= -LegalTrademarks= -OriginalFilename= -ProductName= -ProductVersion=1.0.0.0 -Comments= - -[HistoryLists\hlIncludePath] -Count=4 -Item0=..\lib;$(BCB)\include -Item1=$(BCB)\include -Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl -Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl; - -[HistoryLists\hlLibraryPath] -Count=5 -Item0=..\lib;$(BCB)\lib;$(RELEASELIBPATH) -Item1=..\lib;$(BCB)\lib;..\lib\$(RELEASELIBPATH) -Item2=$(BCB)\lib;$(RELEASELIBPATH) -Item3=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk -Item4=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk; - -[HistoryLists\hlDebugSourcePath] -Count=1 -Item0=$(BCB)\source\vcl - -[HistoryLists\hlConditionals] -Count=9 -Item0=_WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T -Item1=_WINDOWS;WIN32;NDEBUG;_DEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T -Item2=_WINDOWS;WIN32;NDEBUG;_DEBUG;_USRDLL;EXPAT_EXPORTS;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T -Item3=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_USRDLL;EXPAT_EXPORTS;_DEBUG;XML_UNICODE_WCHAR_T -Item4=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_USRDLL;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T;_DEBUG -Item5=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_UNICODE;_USRDLL;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T;_DEBUG -Item6=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_UNICODE;_USRDLL;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T -Item7=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_MBCS;_USRDLL;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T;XML_UNICODE -Item8=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_MBCS;_USRDLL;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T - -[HistoryLists\hlIntOutputDir] -Count=8 -Item0=Release\obj\libexpatw -Item1=Release\obj\libexpat -Item2=Release\obj\mtd -Item3=Release\obj\mt -Item4=Release_w\obj -Item5=Release-w\obj -Item6=Release-w -Item7=..\lib\Release-w - -[HistoryLists\hlFinalOutputDir] -Count=5 -Item0=Release\ -Item1=Release -Item2=Release_w\ -Item3=Release-w\ -Item4=Release-w - -[Debugging] -DebugSourceDirs= - -[Parameters] -RunParams= -HostApplication= -RemoteHost= -RemotePath= -RemoteDebug=0 - -[Compiler] -ShowInfoMsgs=0 -LinkDebugVcl=0 -LinkCGLIB=0 - -[Language] -ActiveLang= -ProjectLang= -RootDir= - </IDEOPTIONS> -</PROJECT>
\ No newline at end of file diff --git a/nx-X11/extras/expat/bcb5/expatw.mak b/nx-X11/extras/expat/bcb5/expatw.mak deleted file mode 100644 index 97f428f4d..000000000 --- a/nx-X11/extras/expat/bcb5/expatw.mak +++ /dev/null @@ -1,187 +0,0 @@ -# --------------------------------------------------------------------------- -!if !$d(BCB) -BCB = $(MAKEDIR)\.. -!endif - -# --------------------------------------------------------------------------- -# IDE SECTION -# --------------------------------------------------------------------------- -# The following section of the project makefile is managed by the BCB IDE. -# It is recommended to use the IDE to change any of the values in this -# section. -# --------------------------------------------------------------------------- - -VERSION = BCB.05.03 -# --------------------------------------------------------------------------- -PROJECT = Release\libexpatw_mtd.dll -OBJFILES = Release\obj\libexpatw\xmlparse.obj Release\obj\libexpatw\xmlrole.obj \ - Release\obj\libexpatw\xmltok.obj -RESFILES = -MAINSOURCE = expatw.bpf -RESDEPEN = $(RESFILES) -LIBFILES = -IDLFILES = -IDLGENFILES = -LIBRARIES = -PACKAGES = VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi \ - ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi \ - VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi \ - dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi -SPARELIBS = -DEFFILE = libexpatw_mtd.def -# --------------------------------------------------------------------------- -PATHCPP = .;..\lib -PATHASM = .; -PATHPAS = .; -PATHRC = .; -DEBUGLIBPATH = $(BCB)\lib\debug -RELEASELIBPATH = $(BCB)\lib\release -USERDEFINES = _WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T -SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL -INCLUDEPATH = ..\lib;$(BCB)\include -LIBPATH = ..\lib;$(BCB)\lib;$(RELEASELIBPATH) -WARNINGS= -w-rch -w-par -w-8027 -w-8026 -w-ccc -# --------------------------------------------------------------------------- -CFLAG1 = -WD -O2 -X- -a8 -b -k- -vi -q -tWM -c -tWD -IDLCFLAGS = -I$(BCB)\include -PFLAGS = -N2Release\obj\libexpatw -N0Release\obj\libexpatw -$Y- -$L- -$D- -RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include -AFLAGS = /mx /w2 /zn -LFLAGS = -IRelease\obj\libexpatw -D"" -aa -Tpd -x -Gn -Gi -w -q -# --------------------------------------------------------------------------- -ALLOBJ = c0d32w.obj $(OBJFILES) -ALLRES = $(RESFILES) -ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib -# --------------------------------------------------------------------------- -!ifdef IDEOPTIONS - -[Version Info] -IncludeVerInfo=0 -AutoIncBuild=0 -MajorVer=1 -MinorVer=0 -Release=0 -Build=0 -Debug=0 -PreRelease=0 -Special=0 -Private=0 -DLL=0 - -[Version Info Keys] -CompanyName= -FileDescription= -FileVersion=1.0.0.0 -InternalName= -LegalCopyright= -LegalTrademarks= -OriginalFilename= -ProductName= -ProductVersion=1.0.0.0 -Comments= - -[Debugging] -DebugSourceDirs=$(BCB)\source\vcl - -!endif - - - - - -# --------------------------------------------------------------------------- -# MAKE SECTION -# --------------------------------------------------------------------------- -# This section of the project file is not used by the BCB IDE. It is for -# the benefit of building from the command-line using the MAKE utility. -# --------------------------------------------------------------------------- - -.autodepend -# --------------------------------------------------------------------------- -!if "$(USERDEFINES)" != "" -AUSERDEFINES = -d$(USERDEFINES:;= -d) -!else -AUSERDEFINES = -!endif - -!if !$d(BCC32) -BCC32 = bcc32 -!endif - -!if !$d(CPP32) -CPP32 = cpp32 -!endif - -!if !$d(DCC32) -DCC32 = dcc32 -!endif - -!if !$d(TASM32) -TASM32 = tasm32 -!endif - -!if !$d(LINKER) -LINKER = ilink32 -!endif - -!if !$d(BRCC32) -BRCC32 = brcc32 -!endif - - -# --------------------------------------------------------------------------- -!if $d(PATHCPP) -.PATH.CPP = $(PATHCPP) -.PATH.C = $(PATHCPP) -!endif - -!if $d(PATHPAS) -.PATH.PAS = $(PATHPAS) -!endif - -!if $d(PATHASM) -.PATH.ASM = $(PATHASM) -!endif - -!if $d(PATHRC) -.PATH.RC = $(PATHRC) -!endif -# --------------------------------------------------------------------------- -$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE) - $(BCB)\BIN\$(LINKER) @&&! - $(LFLAGS) -L$(LIBPATH) + - $(ALLOBJ), + - $(PROJECT),, + - $(ALLLIB), + - $(DEFFILE), + - $(ALLRES) -! -# --------------------------------------------------------------------------- -.pas.hpp: - $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< } - -.pas.obj: - $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< } - -.cpp.obj: - $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< } - -.c.obj: - $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< } - -.c.i: - $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< } - -.cpp.i: - $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< } - -.asm.obj: - $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@ - -.rc.res: - $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $< -# --------------------------------------------------------------------------- - - - - diff --git a/nx-X11/extras/expat/bcb5/expatw_static.bpf b/nx-X11/extras/expat/bcb5/expatw_static.bpf deleted file mode 100644 index 5ca458edc..000000000 --- a/nx-X11/extras/expat/bcb5/expatw_static.bpf +++ /dev/null @@ -1,5 +0,0 @@ -USEUNIT("..\lib\xmlparse.c"); -USEUNIT("..\lib\xmlrole.c"); -USEUNIT("..\lib\xmltok.c"); -//--------------------------------------------------------------------------- -#define Library diff --git a/nx-X11/extras/expat/bcb5/expatw_static.bpr b/nx-X11/extras/expat/bcb5/expatw_static.bpr deleted file mode 100644 index 3f12644b6..000000000 --- a/nx-X11/extras/expat/bcb5/expatw_static.bpr +++ /dev/null @@ -1,152 +0,0 @@ -<?xml version='1.0' encoding='utf-8' ?> -<!-- C++Builder XML Project --> -<PROJECT> - <MACROS> - <VERSION value="BCB.05.03"/> - <PROJECT value="Release\libexpatws_mtd.lib"/> - <OBJFILES value="Release\obj\libexpatw_static\xmlparse.obj - Release\obj\libexpatw_static\xmlrole.obj - Release\obj\libexpatw_static\xmltok.obj"/> - <RESFILES value=""/> - <IDLFILES value=""/> - <IDLGENFILES value=""/> - <DEFFILE value=""/> - <RESDEPEN value="$(RESFILES)"/> - <LIBFILES value=""/> - <LIBRARIES value=""/> - <SPARELIBS value=""/> - <PACKAGES value=""/> - <PATHCPP value=".;..\lib"/> - <PATHPAS value=".;"/> - <PATHRC value=".;"/> - <PATHASM value=".;"/> - <DEBUGLIBPATH value="$(BCB)\lib\debug"/> - <RELEASELIBPATH value="$(BCB)\lib\release"/> - <LINKER value="TLib"/> - <USERDEFINES value="_WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC;XML_UNICODE_WCHAR_T"/> - <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/> - <MAINSOURCE value="expatw_static.bpf"/> - <INCLUDEPATH value="..\lib;$(BCB)\include"/> - <LIBPATH value="..\lib;$(BCB)\lib;$(RELEASELIBPATH)"/> - <WARNINGS value="-w-rch -w-par -w-8027 -w-8026 -w-ccc"/> - <LISTFILE value=""/> - </MACROS> - <OPTIONS> - <IDLCFLAGS value="-I$(BCB)\include"/> - <CFLAG1 value="-O2 -X- -a8 -b -k- -vi -q -tWM -c"/> - <PFLAGS value="-N2Release\obj\libexpatw_static -N0Release\obj\libexpatw_static -$Y- -$L- - -$D-"/> - <RFLAGS value="/l 0x409 /d "NDEBUG" /i$(BCB)\include"/> - <AFLAGS value="/mx /w2 /zn"/> - <LFLAGS value=""/> - </OPTIONS> - <LINKER> - <ALLOBJ value="$(OBJFILES)"/> - <ALLRES value="$(RESFILES)"/> - <ALLLIB value="$(LIBFILES) $(LIBRARIES)"/> - </LINKER> - <IDEOPTIONS> -[Version Info] -IncludeVerInfo=0 -AutoIncBuild=0 -MajorVer=1 -MinorVer=0 -Release=0 -Build=0 -Debug=0 -PreRelease=0 -Special=0 -Private=0 -DLL=0 -Locale=1033 -CodePage=1252 - -[Version Info Keys] -CompanyName= -FileDescription= -FileVersion=1.0.0.0 -InternalName= -LegalCopyright= -LegalTrademarks= -OriginalFilename= -ProductName= -ProductVersion=1.0.0.0 -Comments= - -[HistoryLists\hlIncludePath] -Count=4 -Item0=..\lib;$(BCB)\include -Item1=$(BCB)\include -Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl -Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl; - -[HistoryLists\hlLibraryPath] -Count=5 -Item0=..\lib;$(BCB)\lib;$(RELEASELIBPATH) -Item1=..\lib;$(BCB)\lib;..\lib\$(RELEASELIBPATH) -Item2=$(BCB)\lib;$(RELEASELIBPATH) -Item3=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk -Item4=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk; - -[HistoryLists\hlDebugSourcePath] -Count=1 -Item0=$(BCB)\source\vcl - -[HistoryLists\hlConditionals] -Count=15 -Item0=_WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC;XML_UNICODE_WCHAR_T -Item1=_WINDOWS;WIN32;NDEBUG;_DEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC;XML_UNICODE_WCHAR_T -Item2=WIN32;_WINDOWS;NDEBUG;_DEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC;XML_UNICODE_WCHAR_T -Item3=WIN32;_WINDOWS;NDEBUG;_DEBUG;_LIB;XML_STATIC;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T -Item4=WIN32;_WINDOWS;NDEBUG;_LIB;COMPILED_FROM_DSP;_DEBUG;XML_UNICODE_WCHAR_T -Item5=WIN32;_WINDOWS;NDEBUG;_UNICODE;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;_DEBUG -Item6=WIN32;_WINDOWS;NDEBUG;_UNICODE;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;_DEBUG;__cplusplus -Item7=WIN32;_WINDOWS;NDEBUG;_UNICODE;_LIB;COMPILED_FROM_DSP;XML_UNICODE;_DEBUG -Item8=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE;_DEBUG -Item9=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;_DEBUG;__WCHAR_T -Item10=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;_DEBUG;_UNICODE -Item11=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE;_DEBUG;_UNICODE -Item12=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;_DEBUG -Item13=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T -Item14=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;XML_UNICODE - -[HistoryLists\hlIntOutputDir] -Count=6 -Item0=Release\obj\libexpatw_static -Item1=Release\obj\libexpat_static -Item2=Release\obj\mts -Item3=Release\obj\mt -Item4=..\lib\Release-w_static -Item5=Release-w_static - -[HistoryLists\hlFinalOutputDir] -Count=3 -Item0=Release\ -Item1=Release -Item2=Release-w_static\ - -[HistoryLists\hlTlibPageSize] -Count=1 -Item0=0x0010 - -[Debugging] -DebugSourceDirs= - -[Parameters] -RunParams= -HostApplication= -RemoteHost= -RemotePath= -RemoteDebug=0 - -[Compiler] -ShowInfoMsgs=0 -LinkDebugVcl=0 -LinkCGLIB=0 - -[Language] -ActiveLang= -ProjectLang= -RootDir= - </IDEOPTIONS> -</PROJECT>
\ No newline at end of file diff --git a/nx-X11/extras/expat/bcb5/expatw_static.mak b/nx-X11/extras/expat/bcb5/expatw_static.mak deleted file mode 100644 index 16b7e5b90..000000000 --- a/nx-X11/extras/expat/bcb5/expatw_static.mak +++ /dev/null @@ -1,190 +0,0 @@ -# --------------------------------------------------------------------------- -!if !$d(BCB) -BCB = $(MAKEDIR)\.. -!endif - -# --------------------------------------------------------------------------- -# IDE SECTION -# --------------------------------------------------------------------------- -# The following section of the project makefile is managed by the BCB IDE. -# It is recommended to use the IDE to change any of the values in this -# section. -# --------------------------------------------------------------------------- - -VERSION = BCB.05.03 -# --------------------------------------------------------------------------- -PROJECT = Release\libexpatws_mtd.lib -OBJFILES = Release\obj\libexpatw_static\xmlparse.obj \ - Release\obj\libexpatw_static\xmlrole.obj \ - Release\obj\libexpatw_static\xmltok.obj -RESFILES = -MAINSOURCE = expatw_static.bpf -RESDEPEN = $(RESFILES) -LIBFILES = -IDLFILES = -IDLGENFILES = -LIBRARIES = -PACKAGES = -SPARELIBS = -DEFFILE = -# --------------------------------------------------------------------------- -PATHCPP = .;..\lib -PATHASM = .; -PATHPAS = .; -PATHRC = .; -LINKER = TLib -DEBUGLIBPATH = $(BCB)\lib\debug -RELEASELIBPATH = $(BCB)\lib\release -USERDEFINES = _WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC;XML_UNICODE_WCHAR_T -SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL -INCLUDEPATH = ..\lib;$(BCB)\include -LIBPATH = ..\lib;$(BCB)\lib;$(RELEASELIBPATH) -WARNINGS = -w-rch -w-par -w-8027 -w-8026 -w-ccc -LISTFILE = -# --------------------------------------------------------------------------- -CFLAG1 = -O2 -X- -a8 -b -k- -vi -q -tWM -c -IDLCFLAGS = -I$(BCB)\include -PFLAGS = -N2Release\obj\libexpatw_static -N0Release\obj\libexpatw_static -$Y- -$L- \ - -$D- -RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include -AFLAGS = /mx /w2 /zn -LFLAGS = -# --------------------------------------------------------------------------- -ALLOBJ = $(OBJFILES) -ALLRES = $(RESFILES) -ALLLIB = $(LIBFILES) $(LIBRARIES) -# --------------------------------------------------------------------------- -!ifdef IDEOPTIONS - -[Version Info] -IncludeVerInfo=0 -AutoIncBuild=0 -MajorVer=1 -MinorVer=0 -Release=0 -Build=0 -Debug=0 -PreRelease=0 -Special=0 -Private=0 -DLL=0 - -[Version Info Keys] -CompanyName= -FileDescription= -FileVersion=1.0.0.0 -InternalName= -LegalCopyright= -LegalTrademarks= -OriginalFilename= -ProductName= -ProductVersion=1.0.0.0 -Comments= - -[Debugging] -DebugSourceDirs=$(BCB)\source\vcl - -!endif - - - - - -# --------------------------------------------------------------------------- -# MAKE SECTION -# --------------------------------------------------------------------------- -# This section of the project file is not used by the BCB IDE. It is for -# the benefit of building from the command-line using the MAKE utility. -# --------------------------------------------------------------------------- - -.autodepend -# --------------------------------------------------------------------------- -!if "$(USERDEFINES)" != "" -AUSERDEFINES = -d$(USERDEFINES:;= -d) -!else -AUSERDEFINES = -!endif - -!if !$d(BCC32) -BCC32 = bcc32 -!endif - -!if !$d(CPP32) -CPP32 = cpp32 -!endif - -!if !$d(DCC32) -DCC32 = dcc32 -!endif - -!if !$d(TASM32) -TASM32 = tasm32 -!endif - -!if !$d(LINKER) -LINKER = TLib -!endif - -!if !$d(BRCC32) -BRCC32 = brcc32 -!endif - - -# --------------------------------------------------------------------------- -!if $d(PATHCPP) -.PATH.CPP = $(PATHCPP) -.PATH.C = $(PATHCPP) -!endif - -!if $d(PATHPAS) -.PATH.PAS = $(PATHPAS) -!endif - -!if $d(PATHASM) -.PATH.ASM = $(PATHASM) -!endif - -!if $d(PATHRC) -.PATH.RC = $(PATHRC) -!endif -# --------------------------------------------------------------------------- -!if "$(LISTFILE)" == "" -COMMA = -!else -COMMA = , -!endif - -$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE) - $(BCB)\BIN\$(LINKER) /u $@ @&&! - $(LFLAGS) $? $(COMMA) $(LISTFILE) - -! -# --------------------------------------------------------------------------- -.pas.hpp: - $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< } - -.pas.obj: - $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< } - -.cpp.obj: - $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< } - -.c.obj: - $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< } - -.c.i: - $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< } - -.cpp.i: - $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< } - -.asm.obj: - $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@ - -.rc.res: - $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $< -# --------------------------------------------------------------------------- - - - - diff --git a/nx-X11/extras/expat/bcb5/libexpat_mtd.def b/nx-X11/extras/expat/bcb5/libexpat_mtd.def deleted file mode 100644 index 35ebd6b97..000000000 --- a/nx-X11/extras/expat/bcb5/libexpat_mtd.def +++ /dev/null @@ -1,133 +0,0 @@ -; DEF file for BCB5 -LIBRARY LIBEXPAT_MTD -DESCRIPTION "Implements an XML parser." -EXPORTS - _XML_DefaultCurrent @1 - _XML_ErrorString @2 - _XML_ExpatVersion @3 - _XML_ExpatVersionInfo @4 - _XML_ExternalEntityParserCreate @5 - _XML_GetBase @6 - _XML_GetBuffer @7 - _XML_GetCurrentByteCount @8 - _XML_GetCurrentByteIndex @9 - _XML_GetCurrentColumnNumber @10 - _XML_GetCurrentLineNumber @11 - _XML_GetErrorCode @12 - _XML_GetIdAttributeIndex @13 - _XML_GetInputContext @14 - _XML_GetSpecifiedAttributeCount @15 - _XML_Parse @16 - _XML_ParseBuffer @17 - _XML_ParserCreate @18 - _XML_ParserCreateNS @19 - _XML_ParserCreate_MM @20 - _XML_ParserFree @21 - _XML_SetAttlistDeclHandler @22 - _XML_SetBase @23 - _XML_SetCdataSectionHandler @24 - _XML_SetCharacterDataHandler @25 - _XML_SetCommentHandler @26 - _XML_SetDefaultHandler @27 - _XML_SetDefaultHandlerExpand @28 - _XML_SetDoctypeDeclHandler @29 - _XML_SetElementDeclHandler @30 - _XML_SetElementHandler @31 - _XML_SetEncoding @32 - _XML_SetEndCdataSectionHandler @33 - _XML_SetEndDoctypeDeclHandler @34 - _XML_SetEndElementHandler @35 - _XML_SetEndNamespaceDeclHandler @36 - _XML_SetEntityDeclHandler @37 - _XML_SetExternalEntityRefHandler @38 - _XML_SetExternalEntityRefHandlerArg @39 - _XML_SetNamespaceDeclHandler @40 - _XML_SetNotStandaloneHandler @41 - _XML_SetNotationDeclHandler @42 - _XML_SetParamEntityParsing @43 - _XML_SetProcessingInstructionHandler @44 - _XML_SetReturnNSTriplet @45 - _XML_SetStartCdataSectionHandler @46 - _XML_SetStartDoctypeDeclHandler @47 - _XML_SetStartElementHandler @48 - _XML_SetStartNamespaceDeclHandler @49 - _XML_SetUnknownEncodingHandler @50 - _XML_SetUnparsedEntityDeclHandler @51 - _XML_SetUserData @52 - _XML_SetXmlDeclHandler @53 - _XML_UseParserAsHandlerArg @54 -; added with version 1.95.3 - _XML_ParserReset @55 - _XML_SetSkippedEntityHandler @56 -; added with version 1.95.5 - _XML_GetFeatureList @57 - _XML_UseForeignDTD @58 -; added with version 1.95.6 - _XML_FreeContentModel @59 - _XML_MemMalloc @60 - _XML_MemRealloc @61 - _XML_MemFree @62 - -; Aliases for MS compatible names - XML_DefaultCurrent = _XML_DefaultCurrent - XML_ErrorString = _XML_ErrorString - XML_ExpatVersion = _XML_ExpatVersion - XML_ExpatVersionInfo = _XML_ExpatVersionInfo - XML_ExternalEntityParserCreate = _XML_ExternalEntityParserCreate - XML_GetBase = _XML_GetBase - XML_GetBuffer = _XML_GetBuffer - XML_GetCurrentByteCount = _XML_GetCurrentByteCount - XML_GetCurrentByteIndex = _XML_GetCurrentByteIndex - XML_GetCurrentColumnNumber = _XML_GetCurrentColumnNumber - XML_GetCurrentLineNumber = _XML_GetCurrentLineNumber - XML_GetErrorCode = _XML_GetErrorCode - XML_GetIdAttributeIndex = _XML_GetIdAttributeIndex - XML_GetInputContext = _XML_GetInputContext - XML_GetSpecifiedAttributeCount = _XML_GetSpecifiedAttributeCount - XML_Parse = _XML_Parse - XML_ParseBuffer = _XML_ParseBuffer - XML_ParserCreate = _XML_ParserCreate - XML_ParserCreateNS = _XML_ParserCreateNS - XML_ParserCreate_MM = _XML_ParserCreate_MM - XML_ParserFree = _XML_ParserFree - XML_SetAttlistDeclHandler = _XML_SetAttlistDeclHandler - XML_SetBase = _XML_SetBase - XML_SetCdataSectionHandler = _XML_SetCdataSectionHandler - XML_SetCharacterDataHandler = _XML_SetCharacterDataHandler - XML_SetCommentHandler = _XML_SetCommentHandler - XML_SetDefaultHandler = _XML_SetDefaultHandler - XML_SetDefaultHandlerExpand = _XML_SetDefaultHandlerExpand - XML_SetDoctypeDeclHandler = _XML_SetDoctypeDeclHandler - XML_SetElementDeclHandler = _XML_SetElementDeclHandler - XML_SetElementHandler = _XML_SetElementHandler - XML_SetEncoding = _XML_SetEncoding - XML_SetEndCdataSectionHandler = _XML_SetEndCdataSectionHandler - XML_SetEndDoctypeDeclHandler = _XML_SetEndDoctypeDeclHandler - XML_SetEndElementHandler = _XML_SetEndElementHandler - XML_SetEndNamespaceDeclHandler = _XML_SetEndNamespaceDeclHandler - XML_SetEntityDeclHandler = _XML_SetEntityDeclHandler - XML_SetExternalEntityRefHandler = _XML_SetExternalEntityRefHandler - XML_SetExternalEntityRefHandlerArg = _XML_SetExternalEntityRefHandlerArg - XML_SetNamespaceDeclHandler = _XML_SetNamespaceDeclHandler - XML_SetNotStandaloneHandler = _XML_SetNotStandaloneHandler - XML_SetNotationDeclHandler = _XML_SetNotationDeclHandler - XML_SetParamEntityParsing = _XML_SetParamEntityParsing - XML_SetProcessingInstructionHandler = _XML_SetProcessingInstructionHandler - XML_SetReturnNSTriplet = _XML_SetReturnNSTriplet - XML_SetStartCdataSectionHandler = _XML_SetStartCdataSectionHandler - XML_SetStartDoctypeDeclHandler = _XML_SetStartDoctypeDeclHandler - XML_SetStartElementHandler = _XML_SetStartElementHandler - XML_SetStartNamespaceDeclHandler = _XML_SetStartNamespaceDeclHandler - XML_SetUnknownEncodingHandler = _XML_SetUnknownEncodingHandler - XML_SetUnparsedEntityDeclHandler = _XML_SetUnparsedEntityDeclHandler - XML_SetUserData = _XML_SetUserData - XML_SetXmlDeclHandler = _XML_SetXmlDeclHandler - XML_UseParserAsHandlerArg = _XML_UseParserAsHandlerArg - XML_ParserReset = _XML_ParserReset - XML_SetSkippedEntityHandler = _XML_SetSkippedEntityHandler - XML_GetFeatureList = _XML_GetFeatureList - XML_UseForeignDTD = _XML_UseForeignDTD - XML_FreeContentModel = _XML_FreeContentModel - XML_MemMalloc = _XML_MemMalloc - XML_MemRealloc = _XML_MemRealloc - XML_MemFree = _XML_MemFree diff --git a/nx-X11/extras/expat/bcb5/libexpatw_mtd.def b/nx-X11/extras/expat/bcb5/libexpatw_mtd.def deleted file mode 100644 index bcb265074..000000000 --- a/nx-X11/extras/expat/bcb5/libexpatw_mtd.def +++ /dev/null @@ -1,133 +0,0 @@ -; DEF file for BCB5 -LIBRARY LIBEXPATW_MTD -DESCRIPTION "Implements an XML parser." -EXPORTS - _XML_DefaultCurrent @1 - _XML_ErrorString @2 - _XML_ExpatVersion @3 - _XML_ExpatVersionInfo @4 - _XML_ExternalEntityParserCreate @5 - _XML_GetBase @6 - _XML_GetBuffer @7 - _XML_GetCurrentByteCount @8 - _XML_GetCurrentByteIndex @9 - _XML_GetCurrentColumnNumber @10 - _XML_GetCurrentLineNumber @11 - _XML_GetErrorCode @12 - _XML_GetIdAttributeIndex @13 - _XML_GetInputContext @14 - _XML_GetSpecifiedAttributeCount @15 - _XML_Parse @16 - _XML_ParseBuffer @17 - _XML_ParserCreate @18 - _XML_ParserCreateNS @19 - _XML_ParserCreate_MM @20 - _XML_ParserFree @21 - _XML_SetAttlistDeclHandler @22 - _XML_SetBase @23 - _XML_SetCdataSectionHandler @24 - _XML_SetCharacterDataHandler @25 - _XML_SetCommentHandler @26 - _XML_SetDefaultHandler @27 - _XML_SetDefaultHandlerExpand @28 - _XML_SetDoctypeDeclHandler @29 - _XML_SetElementDeclHandler @30 - _XML_SetElementHandler @31 - _XML_SetEncoding @32 - _XML_SetEndCdataSectionHandler @33 - _XML_SetEndDoctypeDeclHandler @34 - _XML_SetEndElementHandler @35 - _XML_SetEndNamespaceDeclHandler @36 - _XML_SetEntityDeclHandler @37 - _XML_SetExternalEntityRefHandler @38 - _XML_SetExternalEntityRefHandlerArg @39 - _XML_SetNamespaceDeclHandler @40 - _XML_SetNotStandaloneHandler @41 - _XML_SetNotationDeclHandler @42 - _XML_SetParamEntityParsing @43 - _XML_SetProcessingInstructionHandler @44 - _XML_SetReturnNSTriplet @45 - _XML_SetStartCdataSectionHandler @46 - _XML_SetStartDoctypeDeclHandler @47 - _XML_SetStartElementHandler @48 - _XML_SetStartNamespaceDeclHandler @49 - _XML_SetUnknownEncodingHandler @50 - _XML_SetUnparsedEntityDeclHandler @51 - _XML_SetUserData @52 - _XML_SetXmlDeclHandler @53 - _XML_UseParserAsHandlerArg @54 -; added with version 1.95.3 - _XML_ParserReset @55 - _XML_SetSkippedEntityHandler @56 -; added with version 1.95.5 - _XML_GetFeatureList @57 - _XML_UseForeignDTD @58 -; added with version 1.95.6 - _XML_FreeContentModel @59 - _XML_MemMalloc @60 - _XML_MemRealloc @61 - _XML_MemFree @62 - -; Aliases for MS compatible names - XML_DefaultCurrent = _XML_DefaultCurrent - XML_ErrorString = _XML_ErrorString - XML_ExpatVersion = _XML_ExpatVersion - XML_ExpatVersionInfo = _XML_ExpatVersionInfo - XML_ExternalEntityParserCreate = _XML_ExternalEntityParserCreate - XML_GetBase = _XML_GetBase - XML_GetBuffer = _XML_GetBuffer - XML_GetCurrentByteCount = _XML_GetCurrentByteCount - XML_GetCurrentByteIndex = _XML_GetCurrentByteIndex - XML_GetCurrentColumnNumber = _XML_GetCurrentColumnNumber - XML_GetCurrentLineNumber = _XML_GetCurrentLineNumber - XML_GetErrorCode = _XML_GetErrorCode - XML_GetIdAttributeIndex = _XML_GetIdAttributeIndex - XML_GetInputContext = _XML_GetInputContext - XML_GetSpecifiedAttributeCount = _XML_GetSpecifiedAttributeCount - XML_Parse = _XML_Parse - XML_ParseBuffer = _XML_ParseBuffer - XML_ParserCreate = _XML_ParserCreate - XML_ParserCreateNS = _XML_ParserCreateNS - XML_ParserCreate_MM = _XML_ParserCreate_MM - XML_ParserFree = _XML_ParserFree - XML_SetAttlistDeclHandler = _XML_SetAttlistDeclHandler - XML_SetBase = _XML_SetBase - XML_SetCdataSectionHandler = _XML_SetCdataSectionHandler - XML_SetCharacterDataHandler = _XML_SetCharacterDataHandler - XML_SetCommentHandler = _XML_SetCommentHandler - XML_SetDefaultHandler = _XML_SetDefaultHandler - XML_SetDefaultHandlerExpand = _XML_SetDefaultHandlerExpand - XML_SetDoctypeDeclHandler = _XML_SetDoctypeDeclHandler - XML_SetElementDeclHandler = _XML_SetElementDeclHandler - XML_SetElementHandler = _XML_SetElementHandler - XML_SetEncoding = _XML_SetEncoding - XML_SetEndCdataSectionHandler = _XML_SetEndCdataSectionHandler - XML_SetEndDoctypeDeclHandler = _XML_SetEndDoctypeDeclHandler - XML_SetEndElementHandler = _XML_SetEndElementHandler - XML_SetEndNamespaceDeclHandler = _XML_SetEndNamespaceDeclHandler - XML_SetEntityDeclHandler = _XML_SetEntityDeclHandler - XML_SetExternalEntityRefHandler = _XML_SetExternalEntityRefHandler - XML_SetExternalEntityRefHandlerArg = _XML_SetExternalEntityRefHandlerArg - XML_SetNamespaceDeclHandler = _XML_SetNamespaceDeclHandler - XML_SetNotStandaloneHandler = _XML_SetNotStandaloneHandler - XML_SetNotationDeclHandler = _XML_SetNotationDeclHandler - XML_SetParamEntityParsing = _XML_SetParamEntityParsing - XML_SetProcessingInstructionHandler = _XML_SetProcessingInstructionHandler - XML_SetReturnNSTriplet = _XML_SetReturnNSTriplet - XML_SetStartCdataSectionHandler = _XML_SetStartCdataSectionHandler - XML_SetStartDoctypeDeclHandler = _XML_SetStartDoctypeDeclHandler - XML_SetStartElementHandler = _XML_SetStartElementHandler - XML_SetStartNamespaceDeclHandler = _XML_SetStartNamespaceDeclHandler - XML_SetUnknownEncodingHandler = _XML_SetUnknownEncodingHandler - XML_SetUnparsedEntityDeclHandler = _XML_SetUnparsedEntityDeclHandler - XML_SetUserData = _XML_SetUserData - XML_SetXmlDeclHandler = _XML_SetXmlDeclHandler - XML_UseParserAsHandlerArg = _XML_UseParserAsHandlerArg - XML_ParserReset = _XML_ParserReset - XML_SetSkippedEntityHandler = _XML_SetSkippedEntityHandler - XML_GetFeatureList = _XML_GetFeatureList - XML_UseForeignDTD = _XML_UseForeignDTD - XML_FreeContentModel = _XML_FreeContentModel - XML_MemMalloc = _XML_MemMalloc - XML_MemRealloc = _XML_MemRealloc - XML_MemFree = _XML_MemFree diff --git a/nx-X11/extras/expat/bcb5/makefile.mak b/nx-X11/extras/expat/bcb5/makefile.mak deleted file mode 100644 index 548815eaf..000000000 --- a/nx-X11/extras/expat/bcb5/makefile.mak +++ /dev/null @@ -1,37 +0,0 @@ -all: setup expat expatw expat_static expatw_static elements outline xmlwf - -setup: - setup - -expat: - make -l -fexpat.mak - -expatw: - make -l -fexpatw.mak - -expat_static: - make -l -fexpat_static.mak - -expatw_static: - make -l -fexpatw_static.mak - -elements: - make -l -felements.mak - -outline: - make -l -foutline.mak - -xmlwf: - make -l -fxmlwf.mak - -clean: -# works on Win98/ME -# deltree /y release\obj -# works on WinNT/2000 - del /s/f/q release\obj - -distclean: -# works on Win98/ME -# deltree /y release\*.* -# works on WinNT/2000 - del /s/f/q release\* diff --git a/nx-X11/extras/expat/bcb5/outline.bpf b/nx-X11/extras/expat/bcb5/outline.bpf deleted file mode 100644 index 52dce8301..000000000 --- a/nx-X11/extras/expat/bcb5/outline.bpf +++ /dev/null @@ -1,4 +0,0 @@ -USEUNIT("..\examples\outline.c"); -USELIB("Release\libexpat_mtd.lib"); -//--------------------------------------------------------------------------- -main diff --git a/nx-X11/extras/expat/bcb5/outline.bpr b/nx-X11/extras/expat/bcb5/outline.bpr deleted file mode 100644 index e0ae5cdee..000000000 --- a/nx-X11/extras/expat/bcb5/outline.bpr +++ /dev/null @@ -1,132 +0,0 @@ -<?xml version='1.0' encoding='utf-8' ?> -<!-- C++Builder XML Project --> -<PROJECT> - <MACROS> - <VERSION value="BCB.05.03"/> - <PROJECT value="Release\outline.exe"/> - <OBJFILES value="Release\obj\examples\outline.obj"/> - <RESFILES value=""/> - <IDLFILES value=""/> - <IDLGENFILES value=""/> - <DEFFILE value=""/> - <RESDEPEN value="$(RESFILES)"/> - <LIBFILES value="Release\libexpat_mtd.lib"/> - <LIBRARIES value=""/> - <SPARELIBS value=""/> - <PACKAGES value="VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi - ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi - VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi - dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi"/> - <PATHCPP value=".;..\examples"/> - <PATHPAS value=".;"/> - <PATHRC value=".;"/> - <PATHASM value=".;"/> - <DEBUGLIBPATH value="$(BCB)\lib\debug"/> - <RELEASELIBPATH value="$(BCB)\lib\release"/> - <LINKER value="ilink32"/> - <USERDEFINES value="WIN32;NDEBUG;_CONSOLE"/> - <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/> - <MAINSOURCE value="outline.bpf"/> - <INCLUDEPATH value="..\examples;$(BCB)\include"/> - <LIBPATH value="..\examples;$(BCB)\lib;$(RELEASELIBPATH)"/> - <WARNINGS value="-w-par -w-8027 -w-8026"/> - </MACROS> - <OPTIONS> - <IDLCFLAGS value="-I$(BCB)\include"/> - <CFLAG1 value="-O2 -X- -a8 -b -k- -vi -q -tWM -I..\lib -c"/> - <PFLAGS value="-N2Release\obj\examples -N0Release\obj\examples -$Y- -$L- -$D-"/> - <RFLAGS value="/l 0x409 /d "NDEBUG" /i$(BCB)\include"/> - <AFLAGS value="/mx /w2 /zn"/> - <LFLAGS value="-IRelease\obj\examples -D"" -ap -Tpe -x -Gn -q"/> - </OPTIONS> - <LINKER> - <ALLOBJ value="c0x32.obj $(OBJFILES)"/> - <ALLRES value="$(RESFILES)"/> - <ALLLIB value="$(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib"/> - </LINKER> - <IDEOPTIONS> -[Version Info] -IncludeVerInfo=0 -AutoIncBuild=0 -MajorVer=1 -MinorVer=0 -Release=0 -Build=0 -Debug=0 -PreRelease=0 -Special=0 -Private=0 -DLL=0 -Locale=1033 -CodePage=1252 - -[Version Info Keys] -CompanyName= -FileDescription= -FileVersion=1.0.0.0 -InternalName= -LegalCopyright= -LegalTrademarks= -OriginalFilename= -ProductName= -ProductVersion=1.0.0.0 -Comments= - -[HistoryLists\hlIncludePath] -Count=3 -Item0=..\examples;$(BCB)\include -Item1=$(BCB)\include -Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl; - -[HistoryLists\hlLibraryPath] -Count=4 -Item0=..\examples;$(BCB)\lib;$(RELEASELIBPATH) -Item1=..\examples;$(BCB)\lib;..\examples\$(RELEASELIBPATH) -Item2=$(BCB)\lib;$(RELEASELIBPATH) -Item3=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk; - -[HistoryLists\hlDebugSourcePath] -Count=1 -Item0=$(BCB)\source\vcl - -[HistoryLists\hlConditionals] -Count=6 -Item0=WIN32;NDEBUG;_CONSOLE -Item1=WIN32;NDEBUG;_CONSOLE;XML_STATIC -Item2=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_STATIC -Item3=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE;XML_STATIC -Item4=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE -Item5=WIN32;NDEBUG;_CONSOLE;_DEBUG - -[HistoryLists\hlIntOutputDir] -Count=4 -Item0=Release\obj\examples -Item1=Release\obj\outline -Item2=..\examples\Release -Item3=Release - -[HistoryLists\hlFinalOutputDir] -Count=1 -Item0=Release\ - -[Debugging] -DebugSourceDirs= - -[Parameters] -RunParams= -HostApplication= -RemoteHost= -RemotePath= -RemoteDebug=0 - -[Compiler] -ShowInfoMsgs=0 -LinkDebugVcl=0 -LinkCGLIB=0 - -[Language] -ActiveLang= -ProjectLang= -RootDir= - </IDEOPTIONS> -</PROJECT>
\ No newline at end of file diff --git a/nx-X11/extras/expat/bcb5/outline.mak b/nx-X11/extras/expat/bcb5/outline.mak deleted file mode 100644 index 510b541f6..000000000 --- a/nx-X11/extras/expat/bcb5/outline.mak +++ /dev/null @@ -1,186 +0,0 @@ -# --------------------------------------------------------------------------- -!if !$d(BCB) -BCB = $(MAKEDIR)\.. -!endif - -# --------------------------------------------------------------------------- -# IDE SECTION -# --------------------------------------------------------------------------- -# The following section of the project makefile is managed by the BCB IDE. -# It is recommended to use the IDE to change any of the values in this -# section. -# --------------------------------------------------------------------------- - -VERSION = BCB.05.03 -# --------------------------------------------------------------------------- -PROJECT = Release\outline.exe -OBJFILES = Release\obj\examples\outline.obj -RESFILES = -MAINSOURCE = outline.bpf -RESDEPEN = $(RESFILES) -LIBFILES = Release\libexpat_mtd.lib -IDLFILES = -IDLGENFILES = -LIBRARIES = -PACKAGES = VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi \ - ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi \ - VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi \ - dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi -SPARELIBS = -DEFFILE = -# --------------------------------------------------------------------------- -PATHCPP = .;..\examples -PATHASM = .; -PATHPAS = .; -PATHRC = .; -DEBUGLIBPATH = $(BCB)\lib\debug -RELEASELIBPATH = $(BCB)\lib\release -USERDEFINES = WIN32;NDEBUG;_CONSOLE -SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL -INCLUDEPATH = ..\examples;$(BCB)\include -LIBPATH = ..\examples;$(BCB)\lib;$(RELEASELIBPATH) -WARNINGS= -w-par -w-8027 -w-8026 -# --------------------------------------------------------------------------- -CFLAG1 = -O2 -X- -a8 -b -k- -vi -q -tWM -I..\lib -c -IDLCFLAGS = -I$(BCB)\include -PFLAGS = -N2Release\obj\examples -N0Release\obj\examples -$Y- -$L- -$D- -RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include -AFLAGS = /mx /w2 /zn -LFLAGS = -IRelease\obj\examples -D"" -ap -Tpe -x -Gn -q -# --------------------------------------------------------------------------- -ALLOBJ = c0x32.obj $(OBJFILES) -ALLRES = $(RESFILES) -ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib -# --------------------------------------------------------------------------- -!ifdef IDEOPTIONS - -[Version Info] -IncludeVerInfo=0 -AutoIncBuild=0 -MajorVer=1 -MinorVer=0 -Release=0 -Build=0 -Debug=0 -PreRelease=0 -Special=0 -Private=0 -DLL=0 - -[Version Info Keys] -CompanyName= -FileDescription= -FileVersion=1.0.0.0 -InternalName= -LegalCopyright= -LegalTrademarks= -OriginalFilename= -ProductName= -ProductVersion=1.0.0.0 -Comments= - -[Debugging] -DebugSourceDirs=$(BCB)\source\vcl - -!endif - - - - - -# --------------------------------------------------------------------------- -# MAKE SECTION -# --------------------------------------------------------------------------- -# This section of the project file is not used by the BCB IDE. It is for -# the benefit of building from the command-line using the MAKE utility. -# --------------------------------------------------------------------------- - -.autodepend -# --------------------------------------------------------------------------- -!if "$(USERDEFINES)" != "" -AUSERDEFINES = -d$(USERDEFINES:;= -d) -!else -AUSERDEFINES = -!endif - -!if !$d(BCC32) -BCC32 = bcc32 -!endif - -!if !$d(CPP32) -CPP32 = cpp32 -!endif - -!if !$d(DCC32) -DCC32 = dcc32 -!endif - -!if !$d(TASM32) -TASM32 = tasm32 -!endif - -!if !$d(LINKER) -LINKER = ilink32 -!endif - -!if !$d(BRCC32) -BRCC32 = brcc32 -!endif - - -# --------------------------------------------------------------------------- -!if $d(PATHCPP) -.PATH.CPP = $(PATHCPP) -.PATH.C = $(PATHCPP) -!endif - -!if $d(PATHPAS) -.PATH.PAS = $(PATHPAS) -!endif - -!if $d(PATHASM) -.PATH.ASM = $(PATHASM) -!endif - -!if $d(PATHRC) -.PATH.RC = $(PATHRC) -!endif -# --------------------------------------------------------------------------- -$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE) - $(BCB)\BIN\$(LINKER) @&&! - $(LFLAGS) -L$(LIBPATH) + - $(ALLOBJ), + - $(PROJECT),, + - $(ALLLIB), + - $(DEFFILE), + - $(ALLRES) -! -# --------------------------------------------------------------------------- -.pas.hpp: - $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< } - -.pas.obj: - $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< } - -.cpp.obj: - $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< } - -.c.obj: - $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< } - -.c.i: - $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< } - -.cpp.i: - $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< } - -.asm.obj: - $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@ - -.rc.res: - $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $< -# --------------------------------------------------------------------------- - - - - diff --git a/nx-X11/extras/expat/bcb5/setup.bat b/nx-X11/extras/expat/bcb5/setup.bat deleted file mode 100644 index 6f4b57317..000000000 --- a/nx-X11/extras/expat/bcb5/setup.bat +++ /dev/null @@ -1,9 +0,0 @@ -REM CommandInterpreter: $(COMSPEC) -if not exist .\release\nul mkdir release -if not exist .\release\obj\nul mkdir release\obj -if not exist .\release\obj\libexpat\nul mkdir release\obj\libexpat -if not exist .\release\obj\libexpatw\nul mkdir release\obj\libexpatw -if not exist .\release\obj\libexpat_static\nul mkdir release\obj\libexpat_static -if not exist .\release\obj\libexpatw_static\nul mkdir release\obj\libexpatw_static -if not exist .\release\obj\examples\nul mkdir release\obj\examples -if not exist .\release\obj\xmlwf\nul mkdir release\obj\xmlwf diff --git a/nx-X11/extras/expat/bcb5/xmlwf.bpf b/nx-X11/extras/expat/bcb5/xmlwf.bpf deleted file mode 100644 index d06208e81..000000000 --- a/nx-X11/extras/expat/bcb5/xmlwf.bpf +++ /dev/null @@ -1,7 +0,0 @@ -USEUNIT("..\xmlwf\codepage.c"); -USEUNIT("..\xmlwf\win32filemap.c"); -USEUNIT("..\xmlwf\xmlfile.c"); -USEUNIT("..\xmlwf\xmlwf.c"); -USELIB("Release\libexpat_mtd.lib"); -//--------------------------------------------------------------------------- -main diff --git a/nx-X11/extras/expat/bcb5/xmlwf.bpr b/nx-X11/extras/expat/bcb5/xmlwf.bpr deleted file mode 100644 index d33a15387..000000000 --- a/nx-X11/extras/expat/bcb5/xmlwf.bpr +++ /dev/null @@ -1,136 +0,0 @@ -<?xml version='1.0' encoding='utf-8' ?> -<!-- C++Builder XML Project --> -<PROJECT> - <MACROS> - <VERSION value="BCB.05.03"/> - <PROJECT value="Release\xmlwf.exe"/> - <OBJFILES value="Release\obj\xmlwf\codepage.obj Release\obj\xmlwf\win32filemap.obj - Release\obj\xmlwf\xmlfile.obj Release\obj\xmlwf\xmlwf.obj"/> - <RESFILES value=""/> - <IDLFILES value=""/> - <IDLGENFILES value=""/> - <DEFFILE value=""/> - <RESDEPEN value="$(RESFILES)"/> - <LIBFILES value="Release\libexpat_mtd.lib"/> - <LIBRARIES value=""/> - <SPARELIBS value=""/> - <PACKAGES value="VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi - ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi - VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi - dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi"/> - <PATHCPP value=".;..\xmlwf"/> - <PATHPAS value=".;"/> - <PATHRC value=".;"/> - <PATHASM value=".;"/> - <DEBUGLIBPATH value="$(BCB)\lib\debug"/> - <RELEASELIBPATH value="$(BCB)\lib\release"/> - <LINKER value="ilink32"/> - <USERDEFINES value="NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP"/> - <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/> - <MAINSOURCE value="xmlwf.bpf"/> - <INCLUDEPATH value="..\xmlwf;$(BCB)\include"/> - <LIBPATH value="..\xmlwf;$(BCB)\lib;$(RELEASELIBPATH)"/> - <WARNINGS value="-w-8065 -w-par -w-8027 -w-8026"/> - </MACROS> - <OPTIONS> - <IDLCFLAGS value="-I$(BCB)\include"/> - <CFLAG1 value="-O2 -X- -a8 -b -k- -vi -q -tWM -I..\lib -c"/> - <PFLAGS value="-N2Release\obj\xmlwf -N0Release\obj\xmlwf -$Y- -$L- -$D-"/> - <RFLAGS value="/l 0x409 /d "NDEBUG" /i$(BCB)\include"/> - <AFLAGS value="/mx /w2 /zn"/> - <LFLAGS value="-IRelease\obj\xmlwf -D"" -ap -Tpe -x -Gn -q"/> - </OPTIONS> - <LINKER> - <ALLOBJ value="c0x32.obj $(OBJFILES)"/> - <ALLRES value="$(RESFILES)"/> - <ALLLIB value="$(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib"/> - </LINKER> - <IDEOPTIONS> -[Version Info] -IncludeVerInfo=0 -AutoIncBuild=0 -MajorVer=1 -MinorVer=0 -Release=0 -Build=0 -Debug=0 -PreRelease=0 -Special=0 -Private=0 -DLL=0 -Locale=1033 -CodePage=1252 - -[Version Info Keys] -CompanyName= -FileDescription= -FileVersion=1.0.0.0 -InternalName= -LegalCopyright= -LegalTrademarks= -OriginalFilename= -ProductName= -ProductVersion=1.0.0.0 -Comments= - -[HistoryLists\hlIncludePath] -Count=4 -Item0=..\xmlwf;$(BCB)\include -Item1=$(BCB)\include -Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl -Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl; - -[HistoryLists\hlLibraryPath] -Count=5 -Item0=..\xmlwf;$(BCB)\lib;$(RELEASELIBPATH) -Item1=..\xmlwf;$(BCB)\lib;..\xmlwf\$(RELEASELIBPATH) -Item2=$(BCB)\lib;$(RELEASELIBPATH) -Item3=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk -Item4=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk; - -[HistoryLists\hlDebugSourcePath] -Count=1 -Item0=$(BCB)\source\vcl - -[HistoryLists\hlConditionals] -Count=6 -Item0=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP -Item1=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE -Item2=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP;_DEBUG;XML_UNICODE_WCHAR_T -Item3=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP;_DEBUG -Item4=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP;_DEBUG;_UNICODE;XML_UNICODE_WCHAR_T -Item5=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP;_DEBUG;_UNICODE - -[HistoryLists\hlIntOutputDir] -Count=3 -Item0=Release\obj\xmlwf -Item1=..\xmlwf\Release -Item2=Release - -[HistoryLists\hlFinalOutputDir] -Count=3 -Item0=Release\ -Item1=Release -Item2=.\Release\ - -[Debugging] -DebugSourceDirs= - -[Parameters] -RunParams=sample.xml -HostApplication= -RemoteHost= -RemotePath= -RemoteDebug=0 - -[Compiler] -ShowInfoMsgs=0 -LinkDebugVcl=0 -LinkCGLIB=0 - -[Language] -ActiveLang= -ProjectLang= -RootDir= - </IDEOPTIONS> -</PROJECT>
\ No newline at end of file diff --git a/nx-X11/extras/expat/bcb5/xmlwf.mak b/nx-X11/extras/expat/bcb5/xmlwf.mak deleted file mode 100644 index f74126e45..000000000 --- a/nx-X11/extras/expat/bcb5/xmlwf.mak +++ /dev/null @@ -1,187 +0,0 @@ -# --------------------------------------------------------------------------- -!if !$d(BCB) -BCB = $(MAKEDIR)\.. -!endif - -# --------------------------------------------------------------------------- -# IDE SECTION -# --------------------------------------------------------------------------- -# The following section of the project makefile is managed by the BCB IDE. -# It is recommended to use the IDE to change any of the values in this -# section. -# --------------------------------------------------------------------------- - -VERSION = BCB.05.03 -# --------------------------------------------------------------------------- -PROJECT = Release\xmlwf.exe -OBJFILES = Release\obj\xmlwf\codepage.obj Release\obj\xmlwf\win32filemap.obj \ - Release\obj\xmlwf\xmlfile.obj Release\obj\xmlwf\xmlwf.obj -RESFILES = -MAINSOURCE = xmlwf.bpf -RESDEPEN = $(RESFILES) -LIBFILES = Release\libexpat_mtd.lib -IDLFILES = -IDLGENFILES = -LIBRARIES = -PACKAGES = VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi \ - ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi \ - VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi \ - dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi -SPARELIBS = -DEFFILE = -# --------------------------------------------------------------------------- -PATHCPP = .;..\xmlwf -PATHASM = .; -PATHPAS = .; -PATHRC = .; -DEBUGLIBPATH = $(BCB)\lib\debug -RELEASELIBPATH = $(BCB)\lib\release -USERDEFINES = NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP -SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL -INCLUDEPATH = ..\xmlwf;$(BCB)\include -LIBPATH = ..\xmlwf;$(BCB)\lib;$(RELEASELIBPATH) -WARNINGS= -w-8065 -w-par -w-8027 -w-8026 -# --------------------------------------------------------------------------- -CFLAG1 = -O2 -X- -a8 -b -k- -vi -q -tWM -I..\lib -c -IDLCFLAGS = -I$(BCB)\include -PFLAGS = -N2Release\obj\xmlwf -N0Release\obj\xmlwf -$Y- -$L- -$D- -RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include -AFLAGS = /mx /w2 /zn -LFLAGS = -IRelease\obj\xmlwf -D"" -ap -Tpe -x -Gn -q -# --------------------------------------------------------------------------- -ALLOBJ = c0x32.obj $(OBJFILES) -ALLRES = $(RESFILES) -ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib -# --------------------------------------------------------------------------- -!ifdef IDEOPTIONS - -[Version Info] -IncludeVerInfo=0 -AutoIncBuild=0 -MajorVer=1 -MinorVer=0 -Release=0 -Build=0 -Debug=0 -PreRelease=0 -Special=0 -Private=0 -DLL=0 - -[Version Info Keys] -CompanyName= -FileDescription= -FileVersion=1.0.0.0 -InternalName= -LegalCopyright= -LegalTrademarks= -OriginalFilename= -ProductName= -ProductVersion=1.0.0.0 -Comments= - -[Debugging] -DebugSourceDirs=$(BCB)\source\vcl - -!endif - - - - - -# --------------------------------------------------------------------------- -# MAKE SECTION -# --------------------------------------------------------------------------- -# This section of the project file is not used by the BCB IDE. It is for -# the benefit of building from the command-line using the MAKE utility. -# --------------------------------------------------------------------------- - -.autodepend -# --------------------------------------------------------------------------- -!if "$(USERDEFINES)" != "" -AUSERDEFINES = -d$(USERDEFINES:;= -d) -!else -AUSERDEFINES = -!endif - -!if !$d(BCC32) -BCC32 = bcc32 -!endif - -!if !$d(CPP32) -CPP32 = cpp32 -!endif - -!if !$d(DCC32) -DCC32 = dcc32 -!endif - -!if !$d(TASM32) -TASM32 = tasm32 -!endif - -!if !$d(LINKER) -LINKER = ilink32 -!endif - -!if !$d(BRCC32) -BRCC32 = brcc32 -!endif - - -# --------------------------------------------------------------------------- -!if $d(PATHCPP) -.PATH.CPP = $(PATHCPP) -.PATH.C = $(PATHCPP) -!endif - -!if $d(PATHPAS) -.PATH.PAS = $(PATHPAS) -!endif - -!if $d(PATHASM) -.PATH.ASM = $(PATHASM) -!endif - -!if $d(PATHRC) -.PATH.RC = $(PATHRC) -!endif -# --------------------------------------------------------------------------- -$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE) - $(BCB)\BIN\$(LINKER) @&&! - $(LFLAGS) -L$(LIBPATH) + - $(ALLOBJ), + - $(PROJECT),, + - $(ALLLIB), + - $(DEFFILE), + - $(ALLRES) -! -# --------------------------------------------------------------------------- -.pas.hpp: - $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< } - -.pas.obj: - $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< } - -.cpp.obj: - $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< } - -.c.obj: - $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< } - -.c.i: - $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< } - -.cpp.i: - $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< } - -.asm.obj: - $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@ - -.rc.res: - $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $< -# --------------------------------------------------------------------------- - - - - |