diff options
Diffstat (limited to 'nx-X11/extras/freetype2/builds/freetype.mk')
-rw-r--r-- | nx-X11/extras/freetype2/builds/freetype.mk | 312 |
1 files changed, 0 insertions, 312 deletions
diff --git a/nx-X11/extras/freetype2/builds/freetype.mk b/nx-X11/extras/freetype2/builds/freetype.mk deleted file mode 100644 index 00325d6fc..000000000 --- a/nx-X11/extras/freetype2/builds/freetype.mk +++ /dev/null @@ -1,312 +0,0 @@ -# -# FreeType 2 library sub-Makefile -# - - -# Copyright 1996-2000, 2001, 2002, 2003, 2004 by -# David Turner, Robert Wilhelm, and Werner Lemberg. -# -# This file is part of the FreeType project, and may only be used, modified, -# and distributed under the terms of the FreeType project license, -# LICENSE.TXT. By continuing to use, modify, or distribute this file you -# indicate that you have read the license and understand and accept it -# fully. - - -# DO NOT INVOKE THIS MAKEFILE DIRECTLY! IT IS MEANT TO BE INCLUDED BY -# OTHER MAKEFILES. - - -# The following variables (set by other Makefile components, in the -# environment, or on the command line) are used: -# -# BUILD_DIR The architecture dependent directory, -# e.g. `$(TOP_DIR)/builds/unix'. -# -# OBJ_DIR The directory in which object files are created. -# -# LIB_DIR The directory in which the library is created. -# -# DOC_DIR The directory in which the API reference is created. -# -# INCLUDES A list of directories to be included additionally. -# Usually empty. -# -# CFLAGS Compilation flags. This overrides the default settings -# in the platform-specific configuration files. -# -# FTSYS_SRC If set, its value is used as the name of a replacement -# file for `src/base/ftsystem.c'. -# -# FTDEBUG_SRC If set, its value is used as the name of a replacement -# file for `src/base/ftdebug.c'. [For a normal build, this -# file does nothing.] -# -# FT_MODULE_LIST The file which contains the list of modules for the -# current build. Usually, this is automatically created by -# `modules.mk'. -# -# BASE_OBJ_S -# BASE_OBJ_M A list of base objects (for single object and multiple -# object builds, respectively). Set up in -# `src/base/rules.mk'. -# -# BASE_EXT_OBJ A list of base extension objects. Set up in -# `src/base/rules.mk'. -# -# DRV_OBJ_S -# DRV_OBJ_M A list of driver objects (for single object and multiple -# object builds, respectively). Set up cumulatively in -# `src/<driver>/rules.mk'. -# -# CLEAN -# DISTCLEAN The sub-makefiles can append additional stuff to these two -# variables which is to be removed for the `clean' resp. -# `distclean' target. -# -# TOP_DIR, SEP, -# COMPILER_SEP, -# LIBRARY, CC, -# A, I, O, T Check `config.mk' for details. - - -# The targets `objects' and `library' are defined at the end of this -# Makefile after all other rules have been included. -# -.PHONY: single multi objects library refdoc - -# default target -- build single objects and library -# -single: objects library - -# `multi' target -- build multiple objects and library -# -multi: objects library - - -# The FreeType source directory, usually `./src'. -# -SRC_DIR := $(TOP_DIR)/src - -# The directory where the base layer components are placed, usually -# `./src/base'. -# -BASE_DIR := $(SRC_DIR)/base - -# Other derived directories. -# -PUBLIC_DIR := $(TOP_DIR)/include/freetype -INTERNAL_DIR := $(PUBLIC_DIR)/internal -SERVICES_DIR := $(INTERNAL_DIR)/services -CONFIG_DIR := $(PUBLIC_DIR)/config -CACHE_DIR := $(PUBLIC_DIR)/cache - -# The documentation directory. -# -ifndef DOC_DIR - DOC_DIR := $(TOP_DIR)/docs/reference -endif - -# The final name of the library file. -# -PROJECT_LIBRARY := $(LIB_DIR)/$(LIBRARY).$A - - -# include paths -# -# IMPORTANT NOTE: The architecture-dependent directory must ALWAYS be placed -# in front of the include list. Porters are then able to -# put their own version of some of the FreeType components -# in the `freetype/builds/<system>' directory, as these -# files will override the default sources. -# -INCLUDES := $(subst /,$(COMPILER_SEP),$(OBJ_DIR) $(BUILD_DIR) \ - $(TOP_DIR)/include) - -INCLUDE_FLAGS = $(INCLUDES:%=$I%) - - -# C flags used for the compilation of an object file. This must include at -# least the paths for the `base' and `builds/<system>' directories; -# debug/optimization/warning flags + ansi compliance if needed. -# -# $(INCLUDE_FLAGS) should come before $(CFLAGS) to avoid problems with -# old FreeType versions. -# -FT_CFLAGS = $(INCLUDE_FLAGS) $(CFLAGS) -FT_CC = $(CC) $(FT_CFLAGS) -FT_COMPILE = $(CC) $(ANSIFLAGS) $(FT_CFLAGS) - - -# Include the `modules' rules file. -# -include $(TOP_DIR)/builds/modules.mk - - -# Initialize the list of objects. -# -OBJECTS_LIST := - - -# Define $(PUBLIC_H) as the list of all public header files located in -# `$(TOP_DIR)/include/freetype'. $(BASE_H), $(CACHE_H), and $(CONFIG_H) are -# defined similarly. -# -# This is used to simplify the dependency rules -- if one of these files -# changes, the whole library is recompiled. -# -PUBLIC_H := $(wildcard $(PUBLIC_DIR)/*.h) -BASE_H := $(wildcard $(INTERNAL_DIR)/*.h) \ - $(wildcard $(SERVICES_DIR)/*.h) -CONFIG_H := $(wildcard $(CONFIG_DIR)/*.h) \ - $(wildcard $(BUILD_DIR)/freetype/config/*.h) -CACHE_H := $(wildcard $(CACHE_DIR)/*.h) -DEVEL_H := $(wildcard $(TOP_DIR)/devel/*.h) - -FREETYPE_H := $(PUBLIC_H) $(BASE_H) $(CONFIG_H) $(CACHE_H) $(DEVEL_H) - - -# ftsystem component -# -ifndef FTSYS_SRC - FTSYS_SRC = $(BASE_DIR)/ftsystem.c -endif - -FTSYS_OBJ = $(OBJ_DIR)/ftsystem.$O - -OBJECTS_LIST += $(FTSYS_OBJ) - -$(FTSYS_OBJ): $(FTSYS_SRC) $(FREETYPE_H) - $(FT_COMPILE) $T$(subst /,$(COMPILER_SEP),$@ $<) - - -# ftdebug component -# -ifndef FTDEBUG_SRC - FTDEBUG_SRC = $(BASE_DIR)/ftdebug.c -endif - -FTDEBUG_OBJ = $(OBJ_DIR)/ftdebug.$O - -OBJECTS_LIST += $(FTDEBUG_OBJ) - -$(FTDEBUG_OBJ): $(FTDEBUG_SRC) $(FREETYPE_H) - $(FT_COMPILE) $T$(subst /,$(COMPILER_SEP),$@ $<) - - -# Include all rule files from FreeType components. -# -include $(wildcard $(SRC_DIR)/*/rules.mk) - - -# ftinit component -# -# The C source `ftinit.c' contains the FreeType initialization routines. -# It is able to automatically register one or more drivers when the API -# function FT_Init_FreeType() is called. -# -# The set of initial drivers is determined by the driver Makefiles -# includes above. Each driver Makefile updates the FTINIT_xxx lists -# which contain additional include paths and macros used to compile the -# single `ftinit.c' source. -# -FTINIT_SRC := $(BASE_DIR)/ftinit.c -FTINIT_OBJ := $(OBJ_DIR)/ftinit.$O - -OBJECTS_LIST += $(FTINIT_OBJ) - -$(FTINIT_OBJ): $(FTINIT_SRC) $(FREETYPE_H) $(FT_MODULE_LIST) - $(FT_COMPILE) $T$(subst /,$(COMPILER_SEP),$@ $<) - - -# All FreeType library objects -# -# By default, we include the base layer extensions. These could be -# omitted on builds which do not want them. -# -OBJ_M = $(BASE_OBJ_M) $(BASE_EXT_OBJ) $(DRV_OBJS_M) -OBJ_S = $(BASE_OBJ_S) $(BASE_EXT_OBJ) $(DRV_OBJS_S) - - -# The target `multi' on the Make command line indicates that we want to -# compile each source file independently. -# -# Otherwise, each module/driver is compiled in a single object file through -# source file inclusion (see `src/base/ftbase.c' or -# `src/truetype/truetype.c' for examples). -# -BASE_OBJECTS := $(OBJECTS_LIST) - -ifneq ($(findstring multi,$(MAKECMDGOALS)),) - OBJECTS_LIST += $(OBJ_M) -else - OBJECTS_LIST += $(OBJ_S) -endif - -objects: $(OBJECTS_LIST) - -library: $(PROJECT_LIBRARY) - -.c.$O: - $(FT_COMPILE) $T$(subst /,$(COMPILER_SEP),$@ $<) - - -refdoc: - python $(SRC_DIR)/tools/docmaker/docmaker.py \ - --prefix=ft2 \ - --title=FreeType-2.1.9 \ - --output=$(DOC_DIR) \ - $(PUBLIC_DIR)/*.h \ - $(PUBLIC_DIR)/config/*.h \ - $(PUBLIC_DIR)/cache/*.h - - -.PHONY: clean_project_std distclean_project_std - -# Standard cleaning and distclean rules. These are not accepted -# on all systems though. -# -clean_project_std: - -$(DELETE) $(BASE_OBJECTS) $(OBJ_M) $(OBJ_S) $(CLEAN) - -distclean_project_std: clean_project_std - -$(DELETE) $(PROJECT_LIBRARY) - -$(DELETE) *.orig *~ core *.core $(DISTCLEAN) - - -.PHONY: clean_project_dos distclean_project_dos - -# The Dos command shell does not support very long list of arguments, so -# we are stuck with wildcards. -# -# Don't break the command lines with \; this prevents the "del" command from -# working correctly on Win9x. -# -clean_project_dos: - -$(DELETE) $(subst /,\,$(OBJ)/*.$O $(CLEAN) $(NO_OUTPUT)) - -distclean_project_dos: clean_project_dos - -$(DELETE) $(subst /,\,$(PROJECT_LIBRARY) $(DISTCLEAN) $(NO_OUTPUT)) - - -.PHONY: remove_config_mk - -# Remove configuration file (used for distclean). -# -remove_config_mk: - -$(DELETE) $(subst /,$(SEP),$(CONFIG_MK) $(NO_OUTPUT)) - - -.PHONY: clean distclean - -# The `config.mk' file must define `clean_freetype' and -# `distclean_freetype'. Implementations may use to relay these to either -# the `std' or `dos' versions from above, or simply provide their own -# implementation. -# -clean: clean_project -distclean: distclean_project remove_config_mk - -$(DELETE) $(subst /,$(SEP),$(DOC_DIR)/*.html $(NO_OUTPUT)) - - -# EOF |