1 files changed, 0 insertions, 163 deletions
diff --git a/nx-X11/extras/ogl-sample/main/doc/man/mangl/standard/newlist.gl b/nx-X11/extras/ogl-sample/main/doc/man/mangl/standard/newlist.gl
deleted file mode 100644
index 495b3590b..000000000
--- a/nx-X11/extras/ogl-sample/main/doc/man/mangl/standard/newlist.gl
+++ /dev/null
@@ -1,163 +0,0 @@
-_C_ License Applicability. Except to the extent portions of this file are
-_C_ made subject to an alternative license as permitted in the SGI Free
-_C_ Software License B, Version 1.1 (the "License"), the contents of this
-_C_ file are subject only to the provisions of the License. You may not use
-_C_ this file except in compliance with the License. You may obtain a copy
-_C_ of the License at Silicon Graphics, Inc., attn: Legal Services, 1600
-_C_ Amphitheatre Parkway, Mountain View, CA 94043-1351, or at:
-_C_ 
-_C_ http://oss.sgi.com/projects/FreeB
-_C_ 
-_C_ Note that, as provided in the License, the Software is distributed on an
-_C_ "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS
-_C_ DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND
-_C_ CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
-_C_ PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
-_C_ 
-_C_ Original Code. The Original Code is: OpenGL Sample Implementation,
-_C_ Version 1.2.1, released January 26, 2000, developed by Silicon Graphics,
-_C_ Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc.
-_C_ Copyright in any portions created by third parties is as indicated
-_C_ elsewhere herein. All Rights Reserved.
-_C_ 
-_C_ Additional Notice Provisions: The application programming interfaces
-_C_ established by SGI in conjunction with the Original Code are The
-_C_ OpenGL(R) Graphics System: A Specification (Version 1.2.1), released
-_C_ April 1, 1999; The OpenGL(R) Graphics System Utility Library (Version
-_C_ 1.3), released November 4, 1998; and OpenGL(R) Graphics with the X
-_C_ Window System(R) (Version 1.3), released October 19, 1998. This software
-_C_ was created using the OpenGL(R) version 1.2.1 Sample Implementation
-_C_ published by SGI, but has not been independently verified as being
-_C_ compliant with the OpenGL(R) version 1.2.1 Specification.
-_C_
-_C_ The first character in this file must be an '_'!
-_C_ Anything on a line after _C_ is ignored
-_header(NewList,create or replace a display list)
-_names(NewList)
-.SH PARAMETERS
-_phead(_param1)
-Specifies the display-list name.
-_phead(_param2)
-Specifies the compilation mode,
-which can be
-_const(COMPILE) or
-_const(COMPILE_AND_EXECUTE).
-_names(EndList)
-.SH DESCRIPTION
-Display lists are groups of GL commands that have been stored
-for subsequent execution.
-Display lists are created with _cmnd.
-All subsequent commands are placed in the display list,
-in the order issued,
-until _cmnd(EndList) is called. 
-.P
-_cmnd has two arguments.
-The first argument,
-_param1(1),
-is a positive integer that becomes the unique name for the display list.
-Names can be created and reserved with _cmnd(GenLists)
-and tested for uniqueness with _cmnd(IsList).
-The second argument,
-_param2(1),
-is a symbolic constant that can assume one of two values: 
-.TP 30
-_const(COMPILE)
-Commands are merely compiled.
-.TP 
-_const(COMPILE_AND_EXECUTE)
-Commands are executed as they are compiled into the display list.
-.P
-Certain commands are not compiled into the display list
-but are executed immediately,
-regardless of the display-list mode.
-These commands are
-_cmnd(AreTexturesResident),
-_cmnd(ColorPointer),
-_cmnd(DeleteLists),
-_cmnd(DeleteTextures),
-_cmnd(DisableClientState),
-_cmnd(EdgeFlagPointer),
-_cmnd(EnableClientState),
-_cmnd(FeedbackBuffer),
-_cmnd(Finish),
-_cmnd(Flush),
-_cmnd(GenLists),
-_cmnd(GenTextures),
-_cmnd(IndexPointer),
-_cmnd(InterleavedArrays),
-_cmnd(IsEnabled),
-_cmnd(IsList),
-_cmnd(IsTexture),
-_cmnd(NormalPointer),
-_cmnd(PopClientAttrib),
-_cmnd(PixelStore),
-_cmnd(PushClientAttrib),
-_cmnd(ReadPixels),
-_cmnd(RenderMode),
-_cmnd(SelectBuffer),
-_cmnd(TexCoordPointer),
-_cmnd(VertexPointer),
-and all of the _cmnd(Get) commands.
-.P
-Similarly, 
-_cmnd(TexImage1D), _cmnd(TexImage2D), and _cmnd(TexImage3D)
-are executed immediately and not compiled into the display list when their
-first argument is _const(PROXY_TEXTURE_1D), _const(PROXY_TEXTURE_1D), or
-_const(PROXY_TEXTURE_3D), respectively.
-.P
-When the _arbstring(imaging) extension is supported,
-_cmnd(Histogram) executes immediately when its argument is
-_const(PROXY_HISTOGRAM).  Similarly, _cmnd(ColorTable) executes
-immediately when its first argument is _cmnd(PROXY_COLOR_TABLE),
-_cmnd(PROXY_POST_CONVOLUTION_COLOR_TABLE), or
-_cmnd(PROXY_POST_COLOR_MATRIX_COLOR_TABLE).
-.P
-When the _arbstring(multitexture) extension is supported,
-_cmnd(ClientActiveTextureARB) is not compiled into display lists, but
-executed immediately.
-.P
-When _cmnd(EndList) is encountered,
-the display-list definition is completed by associating the list
-with the unique name _param1(1)
-(specified in the _cmnd(NewList) command). 
-If a display list with name _param1(1) already exists,
-it is replaced only when _cmnd(EndList) is called.
-.SH NOTES
-_cmnd(CallList) and _cmnd(CallLists) can be entered into display lists.
-Commands in the display list or lists executed by _cmnd(CallList)
-or _cmnd(CallLists) are not included in the display list being created,
-even if the list creation mode is _const(COMPILE_AND_EXECUTE).
-.P
-A display list is just a group of commands and arguments, so errors
-generated by commands in a display list must be generated when the list is
-executed. If the list is created in _const(COMPILE) mode, errors are
-not generated until the list is executed.
-.SH ERRORS
-_const(INVALID_VALUE) is generated if _param1(1) is 0.
-.P
-_const(INVALID_ENUM) is generated if _param2(1) is not an accepted value.
-.P
-_const(INVALID_OPERATION) is generated if _cmnd(EndList) is called
-without a preceding _cmnd(NewList), 
-or if _cmnd(NewList) is called while a display list is being defined.
-.P
-_const(INVALID_OPERATION) is generated if _cmnd(NewList) or _cmnd(EndList)
-is executed between the execution of _cmnd(Begin)
-and the corresponding execution of _cmnd(End).
-.P
-_const(OUT_OF_MEMORY) is generated if there is insufficient memory to
-compile the display list. If the GL version is 1.1 or greater, no
-change is made to the previous contents of the display list, if any,
-and no other change is made to the GL state. (It is as if no attempt
-had been made to create the new display list.) 
-.SH ASSOCIATED GETS
-_cmnd(IsList)
-.br
-_cmnd(Get) with argument _const(LIST_INDEX)
-.br
-_cmnd(Get) with argument _const(LIST_MODE)
-.SH SEE ALSO
-_cmnd(CallList),
-_cmnd(CallLists),
-_cmnd(DeleteLists), 
-_cmnd(GenLists)