diff options
Diffstat (limited to 'nx-X11/extras/ogl-sample/main/doc/man/manglu/ftn/Imakefile')
| -rw-r--r-- | nx-X11/extras/ogl-sample/main/doc/man/manglu/ftn/Imakefile | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/nx-X11/extras/ogl-sample/main/doc/man/manglu/ftn/Imakefile b/nx-X11/extras/ogl-sample/main/doc/man/manglu/ftn/Imakefile new file mode 100644 index 000000000..f321c491f --- /dev/null +++ b/nx-X11/extras/ogl-sample/main/doc/man/manglu/ftn/Imakefile @@ -0,0 +1,216 @@ +XCOMM License Applicability. Except to the extent portions of this file are +XCOMM made subject to an alternative license as permitted in the SGI Free +XCOMM Software License B, Version 1.1 (the "License"), the contents of this +XCOMM file are subject only to the provisions of the License. You may not use +XCOMM this file except in compliance with the License. You may obtain a copy +XCOMM of the License at Silicon Graphics, Inc., attn: Legal Services, 1600 +XCOMM Amphitheatre Parkway, Mountain View, CA 94043-1351, or at: +XCOMM +XCOMM http://oss.sgi.com/projects/FreeB +XCOMM +XCOMM Note that, as provided in the License, the Software is distributed on an +XCOMM "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS +XCOMM DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND +XCOMM CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A +XCOMM PARTICULAR PURPOSE, AND NON-INFRINGEMENT. +XCOMM +XCOMM Original Code. The Original Code is: OpenGL Sample Implementation, +XCOMM Version 1.2.1, released January 26, 2000, developed by Silicon Graphics, +XCOMM Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc. +XCOMM Copyright in any portions created by third parties is as indicated +XCOMM elsewhere herein. All Rights Reserved. +XCOMM +XCOMM Additional Notice Provisions: The application programming interfaces +XCOMM established by SGI in conjunction with the Original Code are The +XCOMM OpenGL(R) Graphics System: A Specification (Version 1.2.1), released +XCOMM April 1, 1999; The OpenGL(R) Graphics System Utility Library (Version +XCOMM 1.3), released November 4, 1998; and OpenGL(R) Graphics with the X +XCOMM Window System(R) (Version 1.3), released October 19, 1998. This software +XCOMM was created using the OpenGL(R) version 1.2.1 Sample Implementation +XCOMM published by SGI, but has not been independently verified as being +XCOMM compliant with the OpenGL(R) version 1.2.1 Specification. +XCOMM + +#ifdef ManPageAlias +#undef ManPageAlias +#endif +#define ManPageAlias(file,destdir,alias) @@\ +alias.$(MANSUFFIX): file.$(MANSUFFIX) @@\ + echo .so `basename destdir`/file.$(MANSUFFIX) > alias.$(MANSUFFIX) @@\ + +MANSUFFIX = 3gl + +MAN_PAGES = \ +fgluBeginCurve.$(MANSUFFIX) fgluBeginPolygon.$(MANSUFFIX) \ +fgluBeginSurface.$(MANSUFFIX) fgluBeginTrim.$(MANSUFFIX) \ +fgluBuild1DMipmaps.$(MANSUFFIX) fgluBuild2DMipmaps.$(MANSUFFIX) \ +fgluCylinder.$(MANSUFFIX) fgluDeleteNurbsRenderer.$(MANSUFFIX) \ +fgluDeleteQuadric.$(MANSUFFIX) fgluDeleteTess.$(MANSUFFIX) \ +fgluDisk.$(MANSUFFIX) fgluEndCurve.$(MANSUFFIX) \ +fgluEndPolygon.$(MANSUFFIX) fgluEndSurface.$(MANSUFFIX) \ +fgluEndTrim.$(MANSUFFIX) fgluErrorString.$(MANSUFFIX) \ +fgluGetNurbsProperty.$(MANSUFFIX) fgluGetString.$(MANSUFFIX) \ +fgluGetTessProperty.$(MANSUFFIX) fgluLoadSamplingMatrices.$(MANSUFFIX) \ +fgluLookAt.$(MANSUFFIX) fgluNewNurbsRenderer.$(MANSUFFIX) \ +fgluNewQuadric.$(MANSUFFIX) fgluNewTess.$(MANSUFFIX) \ +fgluNextContour.$(MANSUFFIX) fgluNurbsCallback.$(MANSUFFIX) \ +fgluNurbsCallbackDataEXT.$(MANSUFFIX) fgluNurbsCurve.$(MANSUFFIX) \ +fgluNurbsProperty.$(MANSUFFIX) fgluNurbsSurface.$(MANSUFFIX) \ +fgluOrtho2D.$(MANSUFFIX) fgluPartialDisk.$(MANSUFFIX) \ +fgluPerspective.$(MANSUFFIX) fgluPickMatrix.$(MANSUFFIX) \ +fgluProject.$(MANSUFFIX) fgluPwlCurve.$(MANSUFFIX) \ +fgluQuadricCallback.$(MANSUFFIX) fgluQuadricDrawStyle.$(MANSUFFIX) \ +fgluQuadricNormals.$(MANSUFFIX) fgluQuadricOrientation.$(MANSUFFIX) \ +fgluQuadricTexture.$(MANSUFFIX) fgluScaleImage.$(MANSUFFIX) \ +fgluSphere.$(MANSUFFIX) fgluTessBeginContour.$(MANSUFFIX) \ +fgluTessBeginPolygon.$(MANSUFFIX) fgluTessCallback.$(MANSUFFIX) \ +fgluTessEndContour.$(MANSUFFIX) fgluTessEndPolygon.$(MANSUFFIX) \ +fgluTessNormal.$(MANSUFFIX) fgluTessProperty.$(MANSUFFIX) \ +fgluTessVertex.$(MANSUFFIX) fgluUnProject.$(MANSUFFIX) + +LINK_NAMES = \ +fgluBeginCurve.$(MANSUFFIX) fgluBeginPolygon.$(MANSUFFIX) \ +fgluBeginSurface.$(MANSUFFIX) fgluBeginTrim.$(MANSUFFIX) \ +fgluBuild1DMipmaps.$(MANSUFFIX) fgluBuild2DMipmaps.$(MANSUFFIX) \ +fgluCylinder.$(MANSUFFIX) fgluDeleteNurbsRenderer.$(MANSUFFIX) \ +fgluDeleteQuadric.$(MANSUFFIX) fgluDeleteTess.$(MANSUFFIX) \ +fgluDisk.$(MANSUFFIX) fgluErrorString.$(MANSUFFIX) \ +fgluGetNurbsProperty.$(MANSUFFIX) fgluGetString.$(MANSUFFIX) \ +fgluGetTessProperty.$(MANSUFFIX) fgluLoadSamplingMatrices.$(MANSUFFIX) \ +fgluLookAt.$(MANSUFFIX) fgluNewNurbsRenderer.$(MANSUFFIX) \ +fgluNewQuadric.$(MANSUFFIX) fgluNewTess.$(MANSUFFIX) \ +fgluNextContour.$(MANSUFFIX) fgluNurbsCallback.$(MANSUFFIX) \ +fgluNurbsCallbackDataEXT.$(MANSUFFIX) fgluNurbsCurve.$(MANSUFFIX) \ +fgluNurbsProperty.$(MANSUFFIX) fgluNurbsSurface.$(MANSUFFIX) \ +fgluOrtho2D.$(MANSUFFIX) fgluPartialDisk.$(MANSUFFIX) \ +fgluPerspective.$(MANSUFFIX) fgluPickMatrix.$(MANSUFFIX) \ +fgluProject.$(MANSUFFIX) fgluPwlCurve.$(MANSUFFIX) \ +fgluQuadricCallback.$(MANSUFFIX) fgluQuadricDrawStyle.$(MANSUFFIX) \ +fgluQuadricNormals.$(MANSUFFIX) fgluQuadricOrientation.$(MANSUFFIX) \ +fgluQuadricTexture.$(MANSUFFIX) fgluScaleImage.$(MANSUFFIX) \ +fgluSphere.$(MANSUFFIX) fgluTessBeginContour.$(MANSUFFIX) \ +fgluTessBeginPolygon.$(MANSUFFIX) fgluTessCallback.$(MANSUFFIX) \ +fgluTessEndPolygon.$(MANSUFFIX) fgluTessNormal.$(MANSUFFIX) \ +fgluTessProperty.$(MANSUFFIX) fgluTessVertex.$(MANSUFFIX) \ +fgluUnProject.$(MANSUFFIX) + +ALIAS_NAMES = \ +fgluEndCurve.$(MANSUFFIX) fgluEndPolygon.$(MANSUFFIX) \ +fgluEndSurface.$(MANSUFFIX) fgluEndTrim.$(MANSUFFIX) \ +fgluTessEndContour.$(MANSUFFIX) + + +AllTarget($(MAN_PAGES)) + +list: + @for i in $(MAN_PAGES); do echo $$i; done; + +install_list: + @for i in $(MAN_PAGES); do echo $(LIBMANDIR)/$$i; done; + +install:: install.man + +clean:: + $(RM) $(LINK_NAMES) $(ALIAS_NAMES) + +InstallMultipleMan($(MAN_PAGES),$(LIBMANDIR)) + +LinkFile(fgluBeginCurve.$(MANSUFFIX), fglubegincurve.3gl) +ManPageAlias(fgluBeginCurve, $(LIBMANDIR), fgluEndCurve) + +LinkFile(fgluBeginPolygon.$(MANSUFFIX), fglubeginpolygon.3gl) +ManPageAlias(fgluBeginPolygon, $(LIBMANDIR), fgluEndPolygon) + +LinkFile(fgluBeginSurface.$(MANSUFFIX), fglubeginsurface.3gl) +ManPageAlias(fgluBeginSurface, $(LIBMANDIR), fgluEndSurface) + +LinkFile(fgluBeginTrim.$(MANSUFFIX), fglubegintrim.3gl) +ManPageAlias(fgluBeginTrim, $(LIBMANDIR), fgluEndTrim) + +LinkFile(fgluBuild1DMipmaps.$(MANSUFFIX), fglubuild1dmipmaps.3gl) + +LinkFile(fgluBuild2DMipmaps.$(MANSUFFIX), fglubuild2dmipmaps.3gl) + +LinkFile(fgluCylinder.$(MANSUFFIX), fglucylinder.3gl) + +LinkFile(fgluDeleteNurbsRenderer.$(MANSUFFIX), fgludeletenurbsrenderer.3gl) + +LinkFile(fgluDeleteQuadric.$(MANSUFFIX), fgludeletequadric.3gl) + +LinkFile(fgluDeleteTess.$(MANSUFFIX), fgludeletetess.3gl) + +LinkFile(fgluDisk.$(MANSUFFIX), fgludisk.3gl) + +LinkFile(fgluErrorString.$(MANSUFFIX), fgluerrorstring.3gl) + +LinkFile(fgluGetNurbsProperty.$(MANSUFFIX), fglugetnurbsproperty.3gl) + +LinkFile(fgluGetString.$(MANSUFFIX), fglugetstring.3gl) + +LinkFile(fgluGetTessProperty.$(MANSUFFIX), fglugettessproperty.3gl) + +LinkFile(fgluLoadSamplingMatrices.$(MANSUFFIX), fgluloadsamplingmatrices.3gl) + +LinkFile(fgluLookAt.$(MANSUFFIX), fglulookat.3gl) + +LinkFile(fgluNewNurbsRenderer.$(MANSUFFIX), fglunewnurbsrenderer.3gl) + +LinkFile(fgluNewQuadric.$(MANSUFFIX), fglunewquadric.3gl) + +LinkFile(fgluNewTess.$(MANSUFFIX), fglunewtess.3gl) + +LinkFile(fgluNextContour.$(MANSUFFIX), fglunextcontour.3gl) + +LinkFile(fgluNurbsCallback.$(MANSUFFIX), fglunurbscallback.3gl) + +LinkFile(fgluNurbsCallbackDataEXT.$(MANSUFFIX), fglunurbscallbackdataext.3gl) + +LinkFile(fgluNurbsCurve.$(MANSUFFIX), fglunurbscurve.3gl) + +LinkFile(fgluNurbsProperty.$(MANSUFFIX), fglunurbsproperty.3gl) + +LinkFile(fgluNurbsSurface.$(MANSUFFIX), fglunurbssurface.3gl) + +LinkFile(fgluOrtho2D.$(MANSUFFIX), fgluortho2d.3gl) + +LinkFile(fgluPartialDisk.$(MANSUFFIX), fglupartialdisk.3gl) + +LinkFile(fgluPerspective.$(MANSUFFIX), fgluperspective.3gl) + +LinkFile(fgluPickMatrix.$(MANSUFFIX), fglupickmatrix.3gl) + +LinkFile(fgluProject.$(MANSUFFIX), fgluproject.3gl) + +LinkFile(fgluPwlCurve.$(MANSUFFIX), fglupwlcurve.3gl) + +LinkFile(fgluQuadricCallback.$(MANSUFFIX), fgluquadriccallback.3gl) + +LinkFile(fgluQuadricDrawStyle.$(MANSUFFIX), fgluquadricdrawstyle.3gl) + +LinkFile(fgluQuadricNormals.$(MANSUFFIX), fgluquadricnormals.3gl) + +LinkFile(fgluQuadricOrientation.$(MANSUFFIX), fgluquadricorientation.3gl) + +LinkFile(fgluQuadricTexture.$(MANSUFFIX), fgluquadrictexture.3gl) + +LinkFile(fgluScaleImage.$(MANSUFFIX), fgluscaleimage.3gl) + +LinkFile(fgluSphere.$(MANSUFFIX), fglusphere.3gl) + +LinkFile(fgluTessBeginContour.$(MANSUFFIX), fglutessbegincontour.3gl) +ManPageAlias(fgluTessBeginContour, $(LIBMANDIR), fgluTessEndContour) + +LinkFile(fgluTessBeginPolygon.$(MANSUFFIX), fglutessbeginpolygon.3gl) + +LinkFile(fgluTessCallback.$(MANSUFFIX), fglutesscallback.3gl) + +LinkFile(fgluTessEndPolygon.$(MANSUFFIX), fglutessendpolygon.3gl) + +LinkFile(fgluTessNormal.$(MANSUFFIX), fglutessnormal.3gl) + +LinkFile(fgluTessProperty.$(MANSUFFIX), fglutessproperty.3gl) + +LinkFile(fgluTessVertex.$(MANSUFFIX), fglutessvertex.3gl) + +LinkFile(fgluUnProject.$(MANSUFFIX), fgluunproject.3gl) + |