diff options
Diffstat (limited to 'nx-X11/extras/ogl-sample/main/doc/man/manglu/standard/Imakefile')
| -rw-r--r-- | nx-X11/extras/ogl-sample/main/doc/man/manglu/standard/Imakefile | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/nx-X11/extras/ogl-sample/main/doc/man/manglu/standard/Imakefile b/nx-X11/extras/ogl-sample/main/doc/man/manglu/standard/Imakefile new file mode 100644 index 000000000..fa72cb85a --- /dev/null +++ b/nx-X11/extras/ogl-sample/main/doc/man/manglu/standard/Imakefile @@ -0,0 +1,216 @@ +XCOMM License Applicability. Except to the extent portions of this file are +XCOMM made subject to an alternative license as permitted in the SGI Free +XCOMM Software License B, Version 1.1 (the "License"), the contents of this +XCOMM file are subject only to the provisions of the License. You may not use +XCOMM this file except in compliance with the License. You may obtain a copy +XCOMM of the License at Silicon Graphics, Inc., attn: Legal Services, 1600 +XCOMM Amphitheatre Parkway, Mountain View, CA 94043-1351, or at: +XCOMM +XCOMM http://oss.sgi.com/projects/FreeB +XCOMM +XCOMM Note that, as provided in the License, the Software is distributed on an +XCOMM "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS +XCOMM DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND +XCOMM CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A +XCOMM PARTICULAR PURPOSE, AND NON-INFRINGEMENT. +XCOMM +XCOMM Original Code. The Original Code is: OpenGL Sample Implementation, +XCOMM Version 1.2.1, released January 26, 2000, developed by Silicon Graphics, +XCOMM Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc. +XCOMM Copyright in any portions created by third parties is as indicated +XCOMM elsewhere herein. All Rights Reserved. +XCOMM +XCOMM Additional Notice Provisions: The application programming interfaces +XCOMM established by SGI in conjunction with the Original Code are The +XCOMM OpenGL(R) Graphics System: A Specification (Version 1.2.1), released +XCOMM April 1, 1999; The OpenGL(R) Graphics System Utility Library (Version +XCOMM 1.3), released November 4, 1998; and OpenGL(R) Graphics with the X +XCOMM Window System(R) (Version 1.3), released October 19, 1998. This software +XCOMM was created using the OpenGL(R) version 1.2.1 Sample Implementation +XCOMM published by SGI, but has not been independently verified as being +XCOMM compliant with the OpenGL(R) version 1.2.1 Specification. +XCOMM + +#ifdef ManPageAlias +#undef ManPageAlias +#endif +#define ManPageAlias(file,destdir,alias) @@\ +alias.$(MANSUFFIX): file.$(MANSUFFIX) @@\ + echo .so `basename destdir`/file.$(MANSUFFIX) > alias.$(MANSUFFIX) @@\ + +MANSUFFIX = 3gl + +MAN_PAGES = \ +gluBeginCurve.$(MANSUFFIX) gluBeginPolygon.$(MANSUFFIX) \ +gluBeginSurface.$(MANSUFFIX) gluBeginTrim.$(MANSUFFIX) \ +gluBuild1DMipmaps.$(MANSUFFIX) gluBuild2DMipmaps.$(MANSUFFIX) \ +gluCylinder.$(MANSUFFIX) gluDeleteNurbsRenderer.$(MANSUFFIX) \ +gluDeleteQuadric.$(MANSUFFIX) gluDeleteTess.$(MANSUFFIX) \ +gluDisk.$(MANSUFFIX) gluEndCurve.$(MANSUFFIX) \ +gluEndPolygon.$(MANSUFFIX) gluEndSurface.$(MANSUFFIX) \ +gluEndTrim.$(MANSUFFIX) gluErrorString.$(MANSUFFIX) \ +gluGetNurbsProperty.$(MANSUFFIX) gluGetString.$(MANSUFFIX) \ +gluGetTessProperty.$(MANSUFFIX) gluLoadSamplingMatrices.$(MANSUFFIX) \ +gluLookAt.$(MANSUFFIX) gluNewNurbsRenderer.$(MANSUFFIX) \ +gluNewQuadric.$(MANSUFFIX) gluNewTess.$(MANSUFFIX) \ +gluNextContour.$(MANSUFFIX) gluNurbsCallback.$(MANSUFFIX) \ +gluNurbsCallbackDataEXT.$(MANSUFFIX) gluNurbsCurve.$(MANSUFFIX) \ +gluNurbsProperty.$(MANSUFFIX) gluNurbsSurface.$(MANSUFFIX) \ +gluOrtho2D.$(MANSUFFIX) gluPartialDisk.$(MANSUFFIX) \ +gluPerspective.$(MANSUFFIX) gluPickMatrix.$(MANSUFFIX) \ +gluProject.$(MANSUFFIX) gluPwlCurve.$(MANSUFFIX) \ +gluQuadricCallback.$(MANSUFFIX) gluQuadricDrawStyle.$(MANSUFFIX) \ +gluQuadricNormals.$(MANSUFFIX) gluQuadricOrientation.$(MANSUFFIX) \ +gluQuadricTexture.$(MANSUFFIX) gluScaleImage.$(MANSUFFIX) \ +gluSphere.$(MANSUFFIX) gluTessBeginContour.$(MANSUFFIX) \ +gluTessBeginPolygon.$(MANSUFFIX) gluTessCallback.$(MANSUFFIX) \ +gluTessEndContour.$(MANSUFFIX) gluTessEndPolygon.$(MANSUFFIX) \ +gluTessNormal.$(MANSUFFIX) gluTessProperty.$(MANSUFFIX) \ +gluTessVertex.$(MANSUFFIX) gluUnProject.$(MANSUFFIX) + +LINK_NAMES = \ +gluBeginCurve.$(MANSUFFIX) gluBeginPolygon.$(MANSUFFIX) \ +gluBeginSurface.$(MANSUFFIX) gluBeginTrim.$(MANSUFFIX) \ +gluBuild1DMipmaps.$(MANSUFFIX) gluBuild2DMipmaps.$(MANSUFFIX) \ +gluCylinder.$(MANSUFFIX) gluDeleteNurbsRenderer.$(MANSUFFIX) \ +gluDeleteQuadric.$(MANSUFFIX) gluDeleteTess.$(MANSUFFIX) \ +gluDisk.$(MANSUFFIX) gluErrorString.$(MANSUFFIX) \ +gluGetNurbsProperty.$(MANSUFFIX) gluGetString.$(MANSUFFIX) \ +gluGetTessProperty.$(MANSUFFIX) gluLoadSamplingMatrices.$(MANSUFFIX) \ +gluLookAt.$(MANSUFFIX) gluNewNurbsRenderer.$(MANSUFFIX) \ +gluNewQuadric.$(MANSUFFIX) gluNewTess.$(MANSUFFIX) \ +gluNextContour.$(MANSUFFIX) gluNurbsCallback.$(MANSUFFIX) \ +gluNurbsCallbackDataEXT.$(MANSUFFIX) gluNurbsCurve.$(MANSUFFIX) \ +gluNurbsProperty.$(MANSUFFIX) gluNurbsSurface.$(MANSUFFIX) \ +gluOrtho2D.$(MANSUFFIX) gluPartialDisk.$(MANSUFFIX) \ +gluPerspective.$(MANSUFFIX) gluPickMatrix.$(MANSUFFIX) \ +gluProject.$(MANSUFFIX) gluPwlCurve.$(MANSUFFIX) \ +gluQuadricCallback.$(MANSUFFIX) gluQuadricDrawStyle.$(MANSUFFIX) \ +gluQuadricNormals.$(MANSUFFIX) gluQuadricOrientation.$(MANSUFFIX) \ +gluQuadricTexture.$(MANSUFFIX) gluScaleImage.$(MANSUFFIX) \ +gluSphere.$(MANSUFFIX) gluTessBeginContour.$(MANSUFFIX) \ +gluTessBeginPolygon.$(MANSUFFIX) gluTessCallback.$(MANSUFFIX) \ +gluTessEndPolygon.$(MANSUFFIX) gluTessNormal.$(MANSUFFIX) \ +gluTessProperty.$(MANSUFFIX) gluTessVertex.$(MANSUFFIX) \ +gluUnProject.$(MANSUFFIX) + +ALIAS_NAMES = \ +gluEndCurve.$(MANSUFFIX) gluEndPolygon.$(MANSUFFIX) \ +gluEndSurface.$(MANSUFFIX) gluEndTrim.$(MANSUFFIX) \ +gluTessEndContour.$(MANSUFFIX) + + +AllTarget($(MAN_PAGES)) + +list: + @for i in $(MAN_PAGES); do echo $$i; done; + +install_list: + @for i in $(MAN_PAGES); do echo $(LIBMANDIR)/$$i; done; + +install:: install.man + +clean:: + $(RM) $(LINK_NAMES) $(ALIAS_NAMES) + +InstallMultipleMan($(MAN_PAGES),$(LIBMANDIR)) + +LinkFile(gluBeginCurve.$(MANSUFFIX), begincurve.3gl) +ManPageAlias(gluBeginCurve, $(LIBMANDIR), gluEndCurve) + +LinkFile(gluBeginPolygon.$(MANSUFFIX), beginpolygon.3gl) +ManPageAlias(gluBeginPolygon, $(LIBMANDIR), gluEndPolygon) + +LinkFile(gluBeginSurface.$(MANSUFFIX), beginsurface.3gl) +ManPageAlias(gluBeginSurface, $(LIBMANDIR), gluEndSurface) + +LinkFile(gluBeginTrim.$(MANSUFFIX), begintrim.3gl) +ManPageAlias(gluBeginTrim, $(LIBMANDIR), gluEndTrim) + +LinkFile(gluBuild1DMipmaps.$(MANSUFFIX), build1dmipmaps.3gl) + +LinkFile(gluBuild2DMipmaps.$(MANSUFFIX), build2dmipmaps.3gl) + +LinkFile(gluCylinder.$(MANSUFFIX), cylinder.3gl) + +LinkFile(gluDeleteNurbsRenderer.$(MANSUFFIX), deletenurbsrenderer.3gl) + +LinkFile(gluDeleteQuadric.$(MANSUFFIX), deletequadric.3gl) + +LinkFile(gluDeleteTess.$(MANSUFFIX), deletetess.3gl) + +LinkFile(gluDisk.$(MANSUFFIX), disk.3gl) + +LinkFile(gluErrorString.$(MANSUFFIX), errorstring.3gl) + +LinkFile(gluGetNurbsProperty.$(MANSUFFIX), getnurbsproperty.3gl) + +LinkFile(gluGetString.$(MANSUFFIX), getstring.3gl) + +LinkFile(gluGetTessProperty.$(MANSUFFIX), gettessproperty.3gl) + +LinkFile(gluLoadSamplingMatrices.$(MANSUFFIX), loadsamplingmatrices.3gl) + +LinkFile(gluLookAt.$(MANSUFFIX), lookat.3gl) + +LinkFile(gluNewNurbsRenderer.$(MANSUFFIX), newnurbsrenderer.3gl) + +LinkFile(gluNewQuadric.$(MANSUFFIX), newquadric.3gl) + +LinkFile(gluNewTess.$(MANSUFFIX), newtess.3gl) + +LinkFile(gluNextContour.$(MANSUFFIX), nextcontour.3gl) + +LinkFile(gluNurbsCallback.$(MANSUFFIX), nurbscallback.3gl) + +LinkFile(gluNurbsCallbackDataEXT.$(MANSUFFIX), nurbscallbackdataext.3gl) + +LinkFile(gluNurbsCurve.$(MANSUFFIX), nurbscurve.3gl) + +LinkFile(gluNurbsProperty.$(MANSUFFIX), nurbsproperty.3gl) + +LinkFile(gluNurbsSurface.$(MANSUFFIX), nurbssurface.3gl) + +LinkFile(gluOrtho2D.$(MANSUFFIX), ortho2d.3gl) + +LinkFile(gluPartialDisk.$(MANSUFFIX), partialdisk.3gl) + +LinkFile(gluPerspective.$(MANSUFFIX), perspective.3gl) + +LinkFile(gluPickMatrix.$(MANSUFFIX), pickmatrix.3gl) + +LinkFile(gluProject.$(MANSUFFIX), project.3gl) + +LinkFile(gluPwlCurve.$(MANSUFFIX), pwlcurve.3gl) + +LinkFile(gluQuadricCallback.$(MANSUFFIX), quadriccallback.3gl) + +LinkFile(gluQuadricDrawStyle.$(MANSUFFIX), quadricdrawstyle.3gl) + +LinkFile(gluQuadricNormals.$(MANSUFFIX), quadricnormals.3gl) + +LinkFile(gluQuadricOrientation.$(MANSUFFIX), quadricorientation.3gl) + +LinkFile(gluQuadricTexture.$(MANSUFFIX), quadrictexture.3gl) + +LinkFile(gluScaleImage.$(MANSUFFIX), scaleimage.3gl) + +LinkFile(gluSphere.$(MANSUFFIX), sphere.3gl) + +LinkFile(gluTessBeginContour.$(MANSUFFIX), tessbegincontour.3gl) +ManPageAlias(gluTessBeginContour, $(LIBMANDIR), gluTessEndContour) + +LinkFile(gluTessBeginPolygon.$(MANSUFFIX), tessbeginpolygon.3gl) + +LinkFile(gluTessCallback.$(MANSUFFIX), tesscallback.3gl) + +LinkFile(gluTessEndPolygon.$(MANSUFFIX), tessendpolygon.3gl) + +LinkFile(gluTessNormal.$(MANSUFFIX), tessnormal.3gl) + +LinkFile(gluTessProperty.$(MANSUFFIX), tessproperty.3gl) + +LinkFile(gluTessVertex.$(MANSUFFIX), tessvertex.3gl) + +LinkFile(gluUnProject.$(MANSUFFIX), unproject.3gl) + |