aboutsummaryrefslogtreecommitdiff
path: root/nx-X11/lib/font/Speedo/iface.c
diff options
context:
space:
mode:
Diffstat (limited to 'nx-X11/lib/font/Speedo/iface.c')
-rw-r--r--nx-X11/lib/font/Speedo/iface.c650
1 files changed, 0 insertions, 650 deletions
diff --git a/nx-X11/lib/font/Speedo/iface.c b/nx-X11/lib/font/Speedo/iface.c
deleted file mode 100644
index 1dad5ae48..000000000
--- a/nx-X11/lib/font/Speedo/iface.c
+++ /dev/null
@@ -1,650 +0,0 @@
-/* $Xorg: iface.c,v 1.3 2000/08/17 19:46:25 cpqbld Exp $ */
-
-/*
-
-Copyright 1989-1991, Bitstream Inc., Cambridge, MA.
-You are hereby granted permission under all Bitstream propriety rights to
-use, copy, modify, sublicense, sell, and redistribute the Bitstream Speedo
-software and the Bitstream Charter outline font for any purpose and without
-restrictions; provided, that this notice is left intact on all copies of such
-software or font and that Bitstream's trademark is acknowledged as shown below
-on all unmodified copies of such font.
-
-BITSTREAM CHARTER is a registered trademark of Bitstream Inc.
-
-
-BITSTREAM INC. DISCLAIMS ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
-WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-PARTICULAR PURPOSE. BITSTREAM SHALL NOT BE LIABLE FOR ANY DIRECT OR INDIRECT
-DAMAGES, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOST DATA, OR ANY OTHER
-INCIDENTAL OR CONSEQUENTIAL DAMAGES, ARISING OUT OF OR IN ANY WAY CONNECTED
-WITH THE SPEEDO SOFTWARE OR THE BITSTREAM CHARTER OUTLINE FONT.
-
-*/
-/* $XFree86: xc/lib/font/Speedo/iface.c,v 1.2 1998/07/25 06:56:53 dawes Exp $ */
-
-/***************************** I F A C E . C *********************************
- * *
- * This module provides a layer to make Speedo function calls to and *
- * from it compatible with Fontware 2.X function calls. *
- * *
- ****************************************************************************/
-
-#include "speedo.h" /* General definitions for Speedo */
-#ifndef FONTMODULE
-#include <math.h>
-#else
-#include "xf86_ansic.h"
-#endif
-
-#define DEBUG 0
-
-#if DEBUG
-#include <stdio.h>
-#define SHOW(X) printf("X = %d\n", X)
-#else
-#define SHOW(X)
-#endif
-
-#define PI 3.1415926536 /* pi */
-#define PTPERINCH 72.2892 /* nbr points per inch, exactly! */
-
-#define BIT8 0x0100
-#define BIT9 0x0200
-#define BIT10 0x0400
-#define BIT11 0x0800
-#define BIT12 0x1000
-#define BIT13 0x2000
-#define BIT14 0x4000
-#define BIT15 0x8000
-
-#define READ 0
-
-typedef short bool16;
-typedef int bool;
-
-typedef
-struct
- {
- bool16 left;
- bool16 right;
- bool16 top;
- bool16 bottom;
- } lrtb;
-
-
-typedef
-struct
- {
- buff_t *pfont; /* Pointer to font data */
- ufix16 mode; /* what mode is the font generator in */
- real point_size_x; /* Point size in X dimension */
- real point_size_y; /* Point size in Y dimension */
- real res_hor; /* Horizontal resolution of output device */
- real res_ver; /* Vertical resolution of output device */
- real rot_angle; /* Rotation angle in degrees (clockwise) */
- real obl_angle; /* Obliquing angle in degrees (clockwise) */
- bool16 whitewrite; /* if T, generate bitmaps for whitewriters */
- fix15 thresh; /* Scan conversion threshold *
- * Thickens characters on each edge by *
- * <thresh> sub-pixels */
- bool16 import_widths; /* Use imported width table */
- lrtb clip; /* Clip to standard character cell */
- lrtb squeeze; /* Squeeze to standard character cell */
- bool16 bogus_mode; /* if T, ignore plaid data */
- } comp_char_desc; /* character attributes for scan conv */
-
-/***** GLOBAL VARIABLES *****/
-
-/***** GLOBAL FUNCTIONS *****/
- fw_reset(); /* Fontware 2.X reset call */
- fw_set_specs(); /* Fontware 2.X set specs call */
-bool fw_make_char(); /* Fontware 2.X make character call */
-
-/***** EXTERNAL VARIABLES *****/
-
-/***** EXTERNAL FUNCTIONS *****/
-void _open_bitmap();
-void _close_bitmap();
-void _set_bitmap_bits();
-void _open_outline();
-void _open_outline();
-void _start_new_char();
-void _start_curve();
-void _line_to();
-void _close_curve();
-void _close_outline();
-
-/***** STATIC VARIABLES *****/
-static specs_t *pspecs;
-static buff_t *pfont;
-static buff_t char_data;
-static fix15 set_width_x;
-static specs_t specsarg;
-
-/***** STATIC FUNCTIONS *****/
-static fix31 make_mult();
-
-
-FUNCTION fw_reset()
-{
-sp_reset();
-}
-
-FUNCTION fw_set_specs(pspecs)
-comp_char_desc *pspecs; /* Pointer to scan conversion parameters structure */
-
-/* Fontware 2.X character generator call to set font specifications
- * compc -- pointer to structure containing scan conversion parameters.
- * ->compf -- compressed font data structure
- * ->point_size_x -- x pointsize
- * ->point_size_y -- y pointsize
- * ->res_hor -- horizontal pixels per inch
- * ->res_ver -- vertical pixels per inch
- * ->rot_angle -- rotation angle in degrees (clockwise)
- * ->obl_angle -- obliquing angle in degrees (clockwise)
- * ->whitewrite -- if true, generate bitmaps for whitewriters
- * ->thresh -- scan-conversion threshold
- * ->import_widths -- if true, use external width table
- * ->clip.left -- clips min x at left of emsquare
- * ->clip.right -- clips max x at right of emsquare
- * ->clip.bottom -- clips min x at bottom of emsquare
- * ->clip.top -- clips max x at top of emsquare
- * ->squeeze.left -- squeezes min x at left of emsquare
- * ->squeeze.right, .top, .bottom &c
- * ->sw_fixed -- if TRUE, match pixel widths to scaled outline widths
- * ->bogus_mode -- ignore plaid data if TRUE
- */
-
-{
-fix15 irot;
-fix15 iobl;
-fix15 x_trans_type;
-fix15 y_trans_type;
-fix31 xx_mult;
-fix31 xy_mult;
-fix31 yx_mult;
-fix31 yy_mult;
-real sinrot, cosrot, tanobl;
-real x_distortion;
-real pixperem_h;
-real pixperem_v;
-real point_size_x;
-real point_size_y;
-real res_hor;
-real res_ver;
-fix15 mode;
-
-specsarg.pfont = pspecs->pfont;
-
-irot = floor(pspecs->rot_angle + 0.5);
-iobl = floor(pspecs->obl_angle + 0.5);
-if (iobl > 85)
- iobl = 85;
-if (iobl < -85)
- iobl = -85;
-if ((irot % 90) == 0)
- {
- x_trans_type = y_trans_type = irot / 90 & 0x0003;
- if (iobl != 0)
- {
- if (x_trans_type & 0x01)
- y_trans_type = 4;
- else
- x_trans_type = 4;
- }
- }
-else if (((irot + iobl) % 90) == 0)
- {
- x_trans_type = y_trans_type = (irot + iobl) / 90 & 0x0003;
- if (iobl != 0)
- {
- if (x_trans_type & 0x01)
- x_trans_type = 4;
- else
- y_trans_type = 4;
- }
- }
-else
- {
- x_trans_type = y_trans_type = 4;
- }
-
-point_size_x = pspecs->point_size_x;
-point_size_y = pspecs->point_size_y;
-res_hor = pspecs->res_hor;
-res_ver = pspecs->res_ver;
-
-switch (x_trans_type)
- {
-case 0:
- xx_mult = make_mult(point_size_x, res_hor);
- xy_mult = 0;
- break;
-
-case 1:
- xx_mult = 0;
- xy_mult = make_mult(point_size_y, res_hor);
- break;
-
-case 2:
- xx_mult = -make_mult(point_size_x, res_hor);
- xy_mult = 0;
- break;
-
-case 3:
- xx_mult = 0;
- xy_mult = -make_mult(point_size_y, res_hor);
- break;
-
-default:
- sinrot = sin((real)irot * PI / 180.);
- cosrot = cos((real)irot * PI / 180.);
- tanobl = tan((real)iobl * PI / 180.);
- x_distortion = point_size_x / point_size_y;
- pixperem_h = point_size_y * res_hor / (real)PTPERINCH; /* this is NOT a bug */
- xx_mult = floor(cosrot * x_distortion * pixperem_h * 65536.0 + 0.5);
- xy_mult = floor((sinrot + cosrot * tanobl) * pixperem_h * 65536.0 + 0.5);
- break;
- }
-
-switch (y_trans_type)
- {
-case 0:
- yx_mult = 0;
- yy_mult = make_mult(point_size_y, res_ver);
- break;
-
-case 1:
- yx_mult = -make_mult(point_size_x, res_hor);
- yy_mult = 0;
- break;
-
-case 2:
- yx_mult = 0;
- yy_mult = -make_mult(point_size_y, res_ver);
- break;
-
-case 3:
- yx_mult = make_mult(point_size_x, res_ver);
- yy_mult = 0;
- break;
-
-default:
- sinrot = sin((real)irot * PI / 180.);
- cosrot = cos((real)irot * PI / 180.);
- tanobl = tan((real)iobl * PI / 180.);
- x_distortion = point_size_x / point_size_y;
- pixperem_v = point_size_y * res_ver / (real)PTPERINCH;
- yx_mult = floor(-sinrot * x_distortion * pixperem_v * 65536.0 + 0.5);
- yy_mult = floor((cosrot - sinrot * tanobl) * pixperem_v * 65536.0 + 0.5);
- break;
- }
-
-specsarg.xxmult = xx_mult;
-specsarg.xymult = xy_mult;
-specsarg.xoffset = 0;
-specsarg.yxmult = yx_mult;
-specsarg.yymult = yy_mult;
-specsarg.yoffset = 0;
-specsarg.out_info = 0;
-
-/* Select processing mode */
-switch (pspecs->mode)
- {
-case 1:
- if (pspecs->whitewrite) /* White-write requested? */
- {
- mode = 1;
- }
- else
- {
- mode = 0;
- }
- break;
-
-case 2:
- mode = 2;
- break;
-
-default:
- mode = pspecs->mode;
- break;
- }
-
-if (pspecs->bogus_mode) /* Linear transformation requested? */
- {
- mode |= BIT4; /* Set linear tranformation flag */
- }
-
-if (pspecs->import_widths) /* Imported widths requested? */
- {
- mode |= BIT6; /* Set imported width flag */
- }
-
-if (pspecs->clip.left) /* Clip left requested? */
- {
- mode |= BIT8; /* Set clip left flag */
- }
-
-if (pspecs->clip.right) /* Clip right requested? */
- {
- mode |= BIT9; /* Set clip right flag */
- }
-
-if (pspecs->clip.top) /* Clip top requested? */
- {
- mode |= BIT10; /* Set clip top flag */
- }
-
-if (pspecs->clip.bottom) /* Clip bottom requested? */
- {
- mode |= BIT11; /* Set clip bottom flag */
- }
-
-if (pspecs->squeeze.left) /* Squeeze left requested? */
- {
- mode |= BIT12; /* Set squeeze left flag */
- }
-
-if (pspecs->squeeze.right) /* Squeeze right requested? */
- {
- mode |= BIT13; /* Set squeeze right flag */
- }
-
-if (pspecs->squeeze.top) /* Squeeze top requested? */
- {
- mode |= BIT14; /* Set squeeze top flag */
- }
-
-if (pspecs->squeeze.bottom) /* Squeeze bottom requested? */
- {
- mode |= BIT15; /* Set squeeze bottom flag */
- }
-
-specsarg.flags = mode;
-
-sp_set_specs(&specsarg);
-}
-
-FUNCTION static fix31 make_mult(point_size, resolution)
-real point_size;
-real resolution;
-{
-real ms_factor;
-
-return (fix31)floor((point_size * resolution * 65536.0) / (real)PTPERINCH + 0.5);
-}
-
-FUNCTION bool fw_make_char(char_index)
-ufix16 char_index;
-{
-return sp_make_char(char_index);
-}
-
-FUNCTION buff_t *sp_load_char_data(file_offset, no_bytes, cb_offset)
-fix31 file_offset;
-fix15 no_bytes;
-fix15 cb_offset;
-/*
- * Called by Speedo character generator to request that character
- * data be loaded from the font file.
- * This is a dummy function that assumes that the entire font has
- * been loaded.
- */
-{
-#if DEBUG
-printf("load_char_data(%d, %d, %d)\n", file_offset, no_bytes, char_offset);
-#endif
-char_data.org = pfont->org + file_offset;
-char_data.no_bytes = no_bytes;
-return &char_data;
-}
-
-FUNCTION void sp_report_error(n)
-fix15 n; /* Error identification number */
-/*
- * Called by Speedo character generator to report an error.
- */
-{
-switch(n)
- {
-case 1:
- printf("Insufficient font data loaded\n");
- break;
-
-case 3:
- printf("Transformation matrix out of range\n");
- break;
-
-case 4:
- printf("Font format error\n");
- break;
-
-case 5:
- printf("Requested specs not compatible with output module\n");
- break;
-
-case 7:
- printf("Intelligent transformation requested but not supported\n");
- break;
-
-case 8:
- printf("Unsupported output mode requested\n");
- break;
-
-case 9:
- printf("Extended font loaded but only compact fonts supported\n");
- break;
-
-case 10:
- printf("Font specs not set prior to use of font\n");
- break;
-
-case 12:
- printf("Character data not available()\n");
- break;
-
-case 13:
- printf("Track kerning data not available()\n");
- break;
-
-case 14:
- printf("Pair kerning data not available()\n");
- break;
-
-default:
- printf("report_error(%d)\n", n);
- break;
- }
-}
-
-
-
-FUNCTION void sp_open_bitmap(sw_x, sw_y, xorg, yorg, xsize, ysize)
-fix31 sw_x; /* X component of escapement vector */
-fix31 sw_y; /* Y component of escapement vector */
-fix31 xorg; /* X origin */
-fix31 yorg; /* Y origin */
-fix15 xsize; /* width of bitmap */
-fix15 ysize; /* height of bitmap */
-/*
- * Called by Speedo character generator to initialize a buffer prior
- * to receiving bitmap data.
- */
-{
-
-fix15 xmin,xmax,ymin,ymax;
-
-#if DEBUG
-printf("sp_open_bitmap:\n");
-printf(" X component of set width vector = %3.1f\n", (real)sw_x / 65536.0);
-printf(" Y component of set width vector = %3.1f\n", (real)sw_y / 65536.0);
-printf(" Bounding box is (%d, %d, %d, %d)\n", xmin, ymin, xmax, ymax);
-#endif
-
-xmin = xorg >> 16;
-ymin = yorg >> 16;
-xmax = xmin + xsize;
-ymax = ymin + ysize;
-
-set_width_x = ((sw_x >> 15) + 1) >> 1;
-open_bitmap(set_width_x, xmin, xmax, ymin, ymax);
-}
-
-FUNCTION void sp_set_bitmap_bits(y, x1, x2)
-fix15 y, x1, x2;
-/*
- * Called by Speedo character generator to write one row of pixels
- * into the generated bitmap character.
- */
-{
-#if DEBUG
-printf("set_bitmap_bits(%d, %d, %d)\n", y, x1, x2);
-#endif
-
-set_bitmap_bits(y, x1, x2);
-}
-
-FUNCTION void sp_close_bitmap()
-/*
- * Called by Speedo character generator to indicate all bitmap data
- * has been generated.
- */
-{
-#if DEBUG
-printf("close_bitmap()\n");
-#endif
-
-close_bitmap();
-}
-
-FUNCTION void sp_open_outline(sw_x, sw_y, xmin, xmax, ymin, ymax)
-fix31 sw_x; /* X component of escapement vector */
-fix31 sw_y; /* Y component of escapement vector */
-fix31 xmin; /* Minimum X value in outline */
-fix31 xmax; /* Maximum X value in outline */
-fix31 ymin; /* Minimum Y value in outline */
-fix31 ymax; /* Maximum Y value in outline */
-/*
- * Called by Speedo character generator to initialize prior to
- * outputting scaled outline data.
- */
-{
-#if DEBUG
-printf("open_outline(%3.1f, %3.1f, %3.1f, %3.1f, %3.1f, %3.1f)\n",
- (real)sw_x / 65536.0, (real)sw_y / 65536.0,
- (real)xmin / 65536.0, (real)xmax / 65536.0, (real)ymin / 65536.0, (real)ymax / 65536.0);
-#endif
-
-set_width_x = ((sw_x >> 15) + 1) >> 1;
-open_outline(set_width_x);
-}
-
-FUNCTION void sp_start_new_char()
-/*
- * Called by Speedo character generator to initialize prior to
- * outputting scaled outline data for a sub-character in a compound
- * character.
- */
-{
-#if DEBUG
-printf("start_new_char()\n");
-#endif
-
-start_new_char();
-}
-
-FUNCTION void sp_start_contour(x, y, outside)
-fix31 x; /* X coordinate of start point in 1/65536 pixels */
-fix31 y; /* Y coordinate of start point in 1/65536 pixels */
-boolean outside; /* TRUE if curve encloses ink (Counter-clockwise) */
-/*
- * Called by Speedo character generator at the start of each contour
- * in the outline data of the character.
- */
-{
-real realx, realy;
-
-realx = (real)x / 65536.0;
-realy = (real)y / 65536.0;
-
-#if DEBUG
-printf("start_curve(%3.1f, %3.1f, %s)\n",
- realx, realy,
- outside? "outside": "inside");
-#endif
-
-start_curve(realx, realy, outside);
-}
-
-FUNCTION void sp_curve_to(x1, y1, x2, y2, x3, y3)
-fix31 x1; /* X coordinate of first control point in 1/65536 pixels */
-fix31 y1; /* Y coordinate of first control point in 1/65536 pixels */
-fix31 x2; /* X coordinate of second control point in 1/65536 pixels */
-fix31 y2; /* Y coordinate of second control point in 1/65536 pixels */
-fix31 x3; /* X coordinate of curve end point in 1/65536 pixels */
-fix31 y3; /* Y coordinate of curve end point in 1/65536 pixels */
-/*
- * Called by Speedo character generator once for each curve in the
- * scaled outline data of the character. This function is only called if curve
- * output is enabled in the set_specs() call.
- */
-{
-#if DEBUG
-printf("curve_to(%3.1f, %3.1f, %3.1f, %3.1f, %3.1f, %3.1f)\n",
- (real)x1 / 65536.0, (real)y1 / 65536.0,
- (real)x2 / 65536.0, (real)y2 / 65536.0,
- (real)x3 / 65536.0, (real)y3 / 65536.0);
-#endif
-}
-
-FUNCTION void sp_line_to(x, y)
-fix31 x; /* X coordinate of vector end point in 1/65536 pixels */
-fix31 y; /* Y coordinate of vector end point in 1/65536 pixels */
-/*
- * Called by Speedo character generator onece for each vector in the
- * scaled outline data for the character. This include curve data that has
- * been sub-divided into vectors if curve output has not been enabled
- * in the set_specs() call.
- */
-{
-real realx, realy;
-
-realx = (real)x / 65536.0;
-realy = (real)y / 65536.0;
-
-#if DEBUG
-printf("line_to(%3.1f, %3.1f)\n",
- realx, realy);
-#endif
-
-line_to(realx, realy);
-}
-
-FUNCTION void sp_close_contour()
-/*
- * Called by Speedo character generator at the end of each contour
- * in the outline data of the character.
- */
-{
-#if DEBUG
-printf("close_curve()\n");
-#endif
-
-close_curve();
-}
-
-FUNCTION void sp_close_outline()
-/*
- * Called by Speedo character generator at the end of output of the
- * scaled outline of the character.
- */
-{
-#if DEBUG
-printf("close_outline()\n");
-#endif
-
-close_outline(set_width_x);
-}
-
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 04:10:00 +0000