diff options
Diffstat (limited to 'nx-X11/programs/Xserver/hw/darwin/utils/dumpkeymap.c')
| -rw-r--r-- | nx-X11/programs/Xserver/hw/darwin/utils/dumpkeymap.c | 1454 |
1 files changed, 0 insertions, 1454 deletions
diff --git a/nx-X11/programs/Xserver/hw/darwin/utils/dumpkeymap.c b/nx-X11/programs/Xserver/hw/darwin/utils/dumpkeymap.c deleted file mode 100644 index 8f3340b15..000000000 --- a/nx-X11/programs/Xserver/hw/darwin/utils/dumpkeymap.c +++ /dev/null @@ -1,1454 +0,0 @@ -// $XFree86: dumpkeymap.c,v 1.3 2000/12/05 21:18:34 dawes Exp $ -//============================================================================= -// -// Copyright (C) 1999,2000 by Eric Sunshine <sunshine@sunshineco.com> -// All rights reserved. -// -// Redistribution and use in source and binary forms, with or without -// modification, are permitted provided that the following conditions are met: -// -// 1. Redistributions of source code must retain the above copyright -// notice, this list of conditions and the following disclaimer. -// 2. Redistributions in binary form must reproduce the above copyright -// notice, this list of conditions and the following disclaimer in the -// documentation and/or other materials provided with the distribution. -// 3. The name of the author may not be used to endorse or promote products -// derived from this software without specific prior written permission. -// -// THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -// OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -// NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED -// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -// -//============================================================================= -//----------------------------------------------------------------------------- -// dumpkeymap.c -// -// Prints a textual representation of each Apple/NeXT .keymapping file -// mentioned on the command-line. If no files are mentioned and if the -// local machine is an Apple or NeXT installation, then the key mapping -// currently in use by the WindowServer and the AppKit is printed -// instead. -// -// Invoke dumpkeymap with one of the options listed below in order to -// view detailed documentation about .keymapping files and the use of -// this program. -// -// --help: Usage summary. -// --help-keymapping: Detailed discussion of the internal format of a -// .keymapping file. -// --help-output: Explanation of dumpkeymap's output. -// --help-files: List of key mapping-related files and directories. -// --help-diagnostics: Explanation of diagnostic messages. -// -// COMPILATION INSTRUCTIONS -// -// MacOS/X, Darwin -// cc -Wall -o dumpkeymap dumpkeymap.c -framework IOKit -// -// MacOS/X DP4 (Developer Preview 4) -// cc -Wall -o dumpkeymap dumpkeymap.c -FKernel -framework IOKit -// -// MacOS/X Server, OpenStep, NextStep -// cc -Wall -o dumpkeymap dumpkeymap.c -// -// By default, dumpkeymap is configured to interface with the HID driver -// (Apple) or event-status driver (NeXT), thus allowing it to dump the -// key mapping which is currently in use by the WindowServer and AppKit. -// However, these facilities are specific to Apple/NeXT. In order to -// build dumpkeymap for non-Apple/NeXT platforms, you must define the -// DUMPKEYMAP_FILE_ONLY flag when compiling the program. This flag -// inhibits use of the HID and event-status drivers and configures -// dumpkeymap to work strictly with raw key mapping files. -// -// For example, to compile for Linux: -// gcc -Wall -DDUMPKEYMAP_FILE_ONLY -o dumpkeymap dumpkeymap.c -// -// CONCLUSION -// -// This program and its accompanying documentation were written by Eric -// Sunshine and are copyright (C)1999,2000 by Eric Sunshine -// <sunshine@sunshineco.com>. -// -// The implementation of dumpkeymap is based upon information gathered -// on September 3, 1997 by Eric Sunshine <sunshine@sunshineco.com> and -// Paul S. McCarthy <zarnuk@zarnuk.com> during an effort to reverse -// engineer the format of the NeXT .keymapping file. -// -// HISTORY -// -// v4 2000/12/01 Eric Sunshine <sunshine@sunshineco.com> -// Updated manual page to work with `rman', the `man' to `HTML' -// translator. Unfortunately, however, rman is missing important -// roff features such as diversions, indentation, and tab stops, -// and is also hideously buggy, so getting the manual to work with -// rman required quite a few work-arounds. -// The manual page has now been tested with nroff (plain text), troff -// (PostScript, etc.), groff (PostScript), and rman (HTML, etc.) -// -// v3 2000/11/28 Eric Sunshine <sunshine@sunshineco.com> -// Considerably expanded the documentation. -// Augmented the existing description of .keymapping internals. -// Added these new documentation topics: -// - Output: Very important section describing how to interpret -// the output of dumpkeymap. -// - Files: Lists files and directories related to key mappings. -// - Diagnostics: Explains diagnostic messages issued by -// dumpkeymap. -// Created a manual page (dumpkeymap.1) which contains the complete -// set of documentation for key mapping files and dumpkeymap. -// Added command-line options (--help, --help-keymapping, -// --help-output, --help-files, --help-diagnostics) which allow -// access to all key mapping documentation. Previously the -// description of the internal layout of a .keymapping file was -// only available as source code comments. -// Added --version option. -// Ported to non-Apple/NeXT platforms. Defining the pre-processor -// flag DUMPKEYMAP_FILE_ONLY at compilation time inhibits use of -// Apple/NeXT-specific API. -// Added a README file. -// -// v2 2000/11/13 Eric Sunshine <sunshine@sunshineco.com> -// Converted from C++ to plain-C. -// Now parses and takes into account the "number-size" flag stored -// with each key map. This flag indicates the size, in bytes, of -// all remaining numeric values in the mapping. Updated all code -// to respect this flag. (Previously, the purpose of this field -// was unknown, and it was thus denoted as -// `KeyMapping::fill[2]'.) -// Updated all documentation; especially the "KEY MAPPING -// DESCRIPTION" section. Added discussion of the "number-size" -// flag and revamped all structure definitions to use the generic -// data type `number' instead of `uchar' or 'byte'. Clarified -// several sections of the documentation and added missing -// discussions about type definitions and the relationship of -// `interface' and `handler_id' to .keymapping and .keyboard -// files. -// Updated compilation instructions to include directions for all -// platforms on which this program might be built. -// Now published under the formal BSD license rather than a -// home-grown license. -// -// v1 1999/09/08 Eric Sunshine <sunshine@sunshineco.com> -// Created. -//----------------------------------------------------------------------------- -#include <ctype.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <sys/stat.h> -#if !defined(DUMPKEYMAP_FILE_ONLY) -#include <drivers/event_status_driver.h> -#endif - -#define PROG_NAME "dumpkeymap" -#define PROG_VERSION "4" -#define AUTHOR_NAME "Eric Sunshine" -#define AUTHOR_EMAIL "sunshine@sunshineco.com" -#define AUTHOR_INFO AUTHOR_NAME " <" AUTHOR_EMAIL ">" -#define COPYRIGHT "Copyright (C) 1999,2000 by " AUTHOR_INFO - -typedef unsigned char byte; -typedef unsigned short word; -typedef unsigned int natural; -typedef unsigned long dword; -typedef dword number; - -#define ASCII_SET 0x00 -#define BIND_FUNCTION 0xfe -#define BIND_SPECIAL 0xff - -#define OPT_SWITCH(X) { char const* switched_str__=(X); if (0) { -#define OPT_CASE(X,Y) } else if (strcmp(switched_str__,(#X)) == 0 || \ - strcmp(switched_str__,(#Y)) == 0) { -#define OPT_DEFAULT } else { -#define OPT_SWITCH_END }} - -//----------------------------------------------------------------------------- -// Translation Tables -//----------------------------------------------------------------------------- -static char const* const SPECIAL_CODE[] = - { - "sound-up", - "sound-down", - "brightness-up", - "brightness-down", - "alpha-lock", - "help", - "power", - "secondary-up-arrow", - "secondary-down-arrow" - }; -#define N_SPECIAL_CODE (sizeof(SPECIAL_CODE) / sizeof(SPECIAL_CODE[0])) - -static char const* const MODIFIER_CODE[] = - { - "alpha-lock", - "shift", - "control", - "alternate", - "command", - "keypad", - "help" - }; -#define N_MODIFIER_CODE (sizeof(MODIFIER_CODE) / sizeof(MODIFIER_CODE[0])) - -static char const* const MODIFIER_MASK[] = - { - "-----", // R = carriage-return - "----L", // A = alternate - "---S-", // C = control - "---SL", // S = shift - "--C--", // L = alpha-lock - "--C-L", - "--CS-", - "--CSL", - "-A---", - "-A--L", - "-A-S-", - "-A-SL", - "-AC--", - "-AC-L", - "-ACS-", - "-ACSL", - "R----", - "R---L", - "R--S-", - "R--SL", - "R-C--", - "R-C-L", - "R-CS-", - "R-CSL", - "RA---", - "RA--L", - "RA-S-", - "RA-SL", - "RAC--", - "RAC-L", - "RACS-", - "RACSL", - }; -#define N_MODIFIER_MASK (sizeof(MODIFIER_MASK) / sizeof(MODIFIER_MASK[0])) - -#define FUNCTION_KEY_FIRST 0x20 -static char const* const FUNCTION_KEY[] = - { - "F1", // 0x20 - "F2", // 0x21 - "F3", // 0x22 - "F4", // 0x23 - "F5", // 0x24 - "F6", // 0x25 - "F7", // 0x26 - "F8", // 0x27 - "F9", // 0x28 - "F10", // 0x29 - "F11", // 0x2a - "F12", // 0x2b - "insert", // 0x2c - "delete", // 0x2d - "home", // 0x2e - "end", // 0x2f - "page up", // 0x30 - "page down", // 0x31 - "print screen", // 0x32 - "scroll lock", // 0x33 - "pause", // 0x34 - "sys-request", // 0x35 - "break", // 0x36 - "reset (HIL)", // 0x37 - "stop (HIL)", // 0x38 - "menu (HIL)", // 0x39 - "user (HIL)", // 0x3a - "system (HIL)", // 0x3b - "print (HIL)", // 0x3c - "clear line (HIL)", // 0x3d - "clear display (HIL)", // 0x3e - "insert line (HIL)", // 0x3f - "delete line (HIL)", // 0x40 - "insert char (HIL)", // 0x41 - "delete char (HIL)", // 0x42 - "prev (HIL)", // 0x43 - "next (HIL)", // 0x44 - "select (HIL)", // 0x45 - }; -#define N_FUNCTION_KEY (sizeof(FUNCTION_KEY) / sizeof(FUNCTION_KEY[0])) - - -//----------------------------------------------------------------------------- -// Data Stream Object -// Can be configured to treat embedded "numbers" as being composed of -// either 1, 2, or 4 bytes, apiece. -//----------------------------------------------------------------------------- -typedef struct _DataStream - { - byte const* data; - byte const* data_end; - natural number_size; // Size in bytes of a "number" in the stream. - } DataStream; - -static DataStream* new_data_stream( byte const* data, int size ) - { - DataStream* s = (DataStream*)malloc( sizeof(DataStream) ); - s->data = data; - s->data_end = data + size; - s->number_size = 1; // Default to byte-sized numbers. - return s; - } - -static void destroy_data_stream( DataStream* s ) - { - free(s); - } - -static int end_of_stream( DataStream* s ) - { - return (s->data >= s->data_end); - } - -static void expect_nbytes( DataStream* s, int nbytes ) - { - if (s->data + nbytes > s->data_end) - { - fputs( "Insufficient data in keymapping data stream.\n", stderr ); - exit(-1); - } - } - -static byte get_byte( DataStream* s ) - { - expect_nbytes( s, 1 ); - return *s->data++; - } - -static word get_word( DataStream* s ) - { - word hi, lo; - expect_nbytes( s, 2 ); - hi = *s->data++; - lo = *s->data++; - return ((hi << 8) | lo); - } - -static dword get_dword( DataStream* s ) - { - dword b1, b2, b3, b4; - expect_nbytes( s, 4 ); - b4 = *s->data++; - b3 = *s->data++; - b2 = *s->data++; - b1 = *s->data++; - return ((b4 << 24) | (b3 << 16) | (b2 << 8) | b1); - } - -static number get_number( DataStream* s ) - { - switch (s->number_size) - { - case 4: return get_dword(s); - case 2: return get_word(s); - default: return get_byte(s); - } - } - - -//----------------------------------------------------------------------------- -// Translation Utility Functions -//----------------------------------------------------------------------------- -static char const* special_code_desc( number n ) - { - if (n < N_SPECIAL_CODE) - return SPECIAL_CODE[n]; - else - return "invalid"; - } - -static char const* modifier_code_desc( number n ) - { - if (n < N_MODIFIER_CODE) - return MODIFIER_CODE[n]; - else - return "invalid"; - } - -static char const* modifier_mask_desc( number n ) - { - if (n < N_MODIFIER_MASK) - return MODIFIER_MASK[n]; - else - return "?????"; - } - -static char const* function_key_desc( number n ) - { - if (n >= FUNCTION_KEY_FIRST && n < N_FUNCTION_KEY + FUNCTION_KEY_FIRST) - return FUNCTION_KEY[ n - FUNCTION_KEY_FIRST ]; - else - return "unknown"; - } - -static number bits_set( number mask ) - { - number n = 0; - for ( ; mask != 0; mask >>= 1) - if ((mask & 0x01) != 0) - n++; - return n; - } - - -//----------------------------------------------------------------------------- -// Unparse a list of Modifier records. -//----------------------------------------------------------------------------- -static void unparse_modifiers( DataStream* s ) - { - number nmod = get_number(s); // Modifier count - printf( "MODIFIERS [%lu]\n", nmod ); - while (nmod-- > 0) - { - number nscan; - number const code = get_number(s); - printf( "%s:", modifier_code_desc(code) ); - nscan = get_number(s); - while (nscan-- > 0) - printf( " 0x%02x", (natural)get_number(s) ); - putchar( '\n' ); - } - putchar( '\n' ); - } - - -//----------------------------------------------------------------------------- -// Unparse a list of Character records. -//----------------------------------------------------------------------------- -typedef void (*UnparseSpecialFunc)( number code ); - -static void unparse_char_codes( - DataStream* s, number ncodes, UnparseSpecialFunc unparse_special ) - { - if (ncodes != 0) - { - while (ncodes-- > 0) - { - number const char_set = get_number(s); - number const code = get_number(s); - putchar(' '); - switch (char_set) - { - case ASCII_SET: - { - int const c = (int)code; - if (isprint(c)) - printf( "\"%c\"", c ); - else if (code < ' ') - printf( "\"^%c\"", c + '@' ); - else - printf( "%02x", c ); - break; - } - case BIND_FUNCTION: - printf( "[%s]", function_key_desc(code) ); - break; - case BIND_SPECIAL: - unparse_special( code ); - break; - default: - printf( "%02x/%02x", (natural)char_set, (natural)code ); - break; - } - } - } - } - - -//----------------------------------------------------------------------------- -// Unparse a list of scan code bindings. -//----------------------------------------------------------------------------- -static void unparse_key_special( number code ) - { - printf( "{seq#%lu}", code ); - } - -static void unparse_characters( DataStream* s ) - { - number const NOT_BOUND = 0xff; - number const nscans = get_number(s); - number scan; - printf( "CHARACTERS [%lu]\n", nscans ); - for (scan = 0; scan < nscans; scan++) - { - number const mask = get_number(s); - printf( "scan 0x%02x: ", (natural)scan ); - if (mask == NOT_BOUND) - fputs( "not-bound\n", stdout ); - else - { - number const bits = bits_set( mask ); - number const codes = 1 << bits; - printf( "%s ", modifier_mask_desc(mask) ); - unparse_char_codes( s, codes, unparse_key_special ); - putchar( '\n' ); - } - } - putchar( '\n' ); - } - - -//----------------------------------------------------------------------------- -// Unparse a list of key sequences. -//----------------------------------------------------------------------------- -static void unparse_sequence_special( number code ) - { - printf( "{%s}", (code == 0 ? "unmodify" : modifier_code_desc(code)) ); - } - -static void unparse_sequences( DataStream* s ) - { - number const nseqs = get_number(s); - number seq; - printf( "SEQUENCES [%lu]\n", nseqs ); - for (seq = 0; seq < nseqs; seq++) - { - number const nchars = get_number(s); - printf( "sequence %lu:", seq ); - unparse_char_codes( s, nchars, unparse_sequence_special ); - putchar( '\n' ); - } - putchar( '\n' ); - } - - -//----------------------------------------------------------------------------- -// Unparse a list of special keys. -//----------------------------------------------------------------------------- -static void unparse_specials( DataStream* s ) - { - number nspecials = get_number(s); - printf( "SPECIALS [%lu]\n", nspecials ); - while (nspecials-- > 0) - { - number const special = get_number(s); - number const scan = get_number(s); - printf( "%s: 0x%02x\n", special_code_desc(special), (natural)scan ); - } - putchar( '\n' ); - } - - -//----------------------------------------------------------------------------- -// Unparse the number-size flag. -//----------------------------------------------------------------------------- -static void unparse_numeric_size( DataStream* s ) - { - word const numbers_are_shorts = get_word(s); - s->number_size = numbers_are_shorts ? 2 : 1; - } - - -//----------------------------------------------------------------------------- -// Unparse an entire key map. -//----------------------------------------------------------------------------- -static void unparse_keymap_data( DataStream* s ) - { - unparse_numeric_size(s); - unparse_modifiers(s); - unparse_characters(s); - unparse_sequences(s); - unparse_specials(s); - } - - -//----------------------------------------------------------------------------- -// Unparse the active key map. -//----------------------------------------------------------------------------- -#if !defined(DUMPKEYMAP_FILE_ONLY) -static int unparse_active_keymap( void ) - { - int rc = 1; - NXEventHandle const h = NXOpenEventStatus(); - if (h == 0) - fputs( "Unable to open event status driver.\n", stderr ); - else - { - NXKeyMapping km; - km.size = NXKeyMappingLength(h); - if (km.size <= 0) - fprintf( stderr, "Bad key mapping length (%d).\n", km.size ); - else - { - km.mapping = (char*)malloc( km.size ); - if (NXGetKeyMapping( h, &km ) == 0) - fputs( "Unable to get current key mapping.\n", stderr ); - else - { - DataStream* stream = - new_data_stream( (byte const*)km.mapping, km.size ); - fputs( "=============\nACTIVE KEYMAP\n=============\n\n", - stdout); - unparse_keymap_data( stream ); - destroy_data_stream( stream ); - rc = 0; - } - free( km.mapping ); - } - NXCloseEventStatus(h); - } - return rc; - } -#endif - - -//----------------------------------------------------------------------------- -// Unparse one key map from a keymapping file. -//----------------------------------------------------------------------------- -static void unparse_keymap( DataStream* s ) - { - dword const interface = get_dword(s); - dword const handler_id = get_dword(s); - dword const map_size = get_dword(s); - printf( "interface: 0x%02lx\nhandler_id: 0x%02lx\nmap_size: %lu bytes\n\n", - interface, handler_id, map_size ); - unparse_keymap_data(s); - } - - -//----------------------------------------------------------------------------- -// Check the magic number of a keymapping file. -//----------------------------------------------------------------------------- -static int check_magic_number( DataStream* s ) - { - return (get_byte(s) == 'K' && - get_byte(s) == 'Y' && - get_byte(s) == 'M' && - get_byte(s) == '1'); - } - - -//----------------------------------------------------------------------------- -// Unparse all key maps within a keymapping file. -//----------------------------------------------------------------------------- -static int unparse_keymaps( DataStream* s ) - { - int rc = 0; - if (check_magic_number(s)) - { - int n = 1; - while (!end_of_stream(s)) - { - printf( "---------\nKEYMAP #%d\n---------\n", n++ ); - unparse_keymap(s); - } - } - else - { - fputs( "Bad magic number.\n", stderr ); - rc = 1; - } - return rc; - } - - -//----------------------------------------------------------------------------- -// Unparse a keymapping file. -//----------------------------------------------------------------------------- -static int unparse_keymap_file( char const* const path ) - { - int rc = 1; - FILE* file; - printf( "===========\nKEYMAP FILE\n===========\n%s\n\n", path ); - file = fopen( path, "rb" ); - if (file == 0) - perror( "Unable to open key mapping file" ); - else - { - struct stat st; - if (fstat( fileno(file), &st ) != 0) - perror( "Unable to determine key mapping file size" ); - else - { - byte* buffer = (byte*)malloc( st.st_size ); - if (fread( buffer, st.st_size, 1, file ) != 1) - perror( "Unable to read key mapping file" ); - else - { - DataStream* stream = new_data_stream(buffer, (int)st.st_size); - fclose( file ); file = 0; - rc = unparse_keymaps( stream ); - destroy_data_stream( stream ); - } - free( buffer ); - } - if (file != 0) - fclose( file ); - } - return rc; - } - - -//----------------------------------------------------------------------------- -// Handle the case when no documents are mentioned on the command-line. For -// Apple/NeXT platforms, dump the currently active key mapping; else display -// an error message. -//----------------------------------------------------------------------------- -static int handle_empty_document_list( void ) - { -#if !defined(DUMPKEYMAP_FILE_ONLY) - return unparse_active_keymap(); -#else - fputs( "ERROR: Must specify at least one .keymapping file.\n\n", stderr ); - return 1; -#endif - } - - -//----------------------------------------------------------------------------- -// Print a detailed description of the internal layout of a key mapping. -//----------------------------------------------------------------------------- -static void print_internal_layout_info( FILE* f ) - { - fputs( -"What follows is a detailed descriptions of the internal layout of an\n" -"Apple/NeXT .keymapping file.\n" -"\n" -"Types and Data\n" -"--------------\n" -"The following type definitions are employed throughout this discussion:\n" -"\n" -" typedef unsigned char byte;\n" -" typedef unsigned short word;\n" -" typedef unsigned long dword;\n" -"\n" -"Additionally, the type definition `number' is used generically to indicate\n" -"a numeric value. The actual size of the `number' type may be one or two\n" -"bytes depending upon how the data is stored in the key map. Although most\n" -"key maps use byte-sized numeric values, word-sized values are also allowed.\n" -"\n" -"Multi-byte values in a key mapping file are stored in big-endian byte\n" -"order.\n" -"\n" -"Key Mapping File and Device Mapping\n" -"-----------------------------------\n" -"A key mapping file begins with a magic-number and continues with a variable\n" -"number of device-specific key mappings.\n" -"\n" -" struct KeyMappingFile {\n" -" char magic_number[4]; // `KYM1'\n" -" DeviceMapping maps[...]; // Variable number of maps\n" -" };\n" -"\n" -" struct DeviceMapping {\n" -" dword interface; // Interface type\n" -" dword handler_id; // Interface subtype\n" -" dword map_size; // Byte count of `map' (below)\n" -" KeyMapping map;\n" -" };\n" -"\n" -"The value of `interface' represents a family of keyboard device types\n" -"(such as Intel PC, ADB, NeXT, Sun Type5, etc.), and is generally\n" -"specified as one of the constant values NX_EVS_DEVICE_INTERFACE_ADB,\n" -"NX_EVS_DEVICE_INTERFACE_ACE, etc., which are are defined in IOHIDTypes.h on\n" -"MacOS/X and Darwin, and in ev_types.h on MacOS/X Server, OpenStep, and\n" -"NextStep.\n" -"\n" -"The value of `handler_id' represents a specific keyboard layout within the\n" -"much broader `interface' family. For instance, for a 101-key Intel PC\n" -"keyboard (of type NX_EVS_DEVICE_INTERFACE_ACE) the `handler_id' is '0',\n" -"whereas for a 102-key keyboard it is `1'.\n" -"\n" -"Together, `interface' and `handler_id' identify the exact keyboard hardware\n" -"to which this mapping applies. Programs which display a visual\n" -"representation of a keyboard layout, match `interface' and `handler_id'\n" -"from the .keymapping file against the `interface' and `handler_id' values\n" -"found in each .keyboard file.\n" -"\n" -"Key Mapping\n" -"-----------\n" -"A key mapping completely defines the relationship of all scan codes with\n" -"their associated functionality. A KeyMapping structure is embedded within\n" -"the DeviceMapping structure in a KeyMappingFile. The key mapping currently\n" -"in use by the WindowServer and AppKit is also represented by a KeyMapping\n" -"structure, and can be referred to directly by calling NXGetKeyMapping() and\n" -"accessing the `mapping' data member of the returned NXKeyMapping structure.\n" -"\n" -" struct KeyMapping {\n" -" word number_size; // 0=1 byte, non-zero=2 bytes\n" -" number num_modifier_groups; // Modifier groups\n" -" ModifierGroup modifier_groups[...];\n" -" number num_scan_codes; // Scan groups\n" -" ScanGroup scan_table[...];\n" -" number num_sequence_lists; // Sequence lists\n" -" Sequence sequence_lists[...];\n" -" number num_special_keys; // Special keys\n" -" SpecialKey special_key[...];\n" -" };\n" -"\n" -"The `number_size' flag determines the size, in bytes, of all remaining\n" -"numeric values (denoted by the type definition `number') within the key\n" -"mapping. If its value is zero, then numbers are represented by a single\n" -"byte. If it is non-zero, then numbers are represented by a word (two\n" -"bytes).\n" -"\n" -"Modifier Group\n" -"--------------\n" -"A modifier group defines all scan codes which map to a particular type of\n" -"modifier, such as `shift', `control', etc.\n" -"\n" -" enum Modifier {\n" -" ALPHALOCK = 0,\n" -" SHIFT,\n" -" CONTROL,\n" -" ALTERNATE,\n" -" COMMAND,\n" -" KEYPAD,\n" -" HELP\n" -" };\n" -"\n" -" struct ModifierGroup {\n" -" number modifier; // A Modifier constant\n" -" number num_scan_codes;\n" -" number scan_codes[...]; // Variable number of scan codes\n" -" };\n" -"\n" -"The scan_codes[] array contains a list of all scan codes which map to the\n" -"specified modifier. The `shift', `command', and `alternate' modifiers are\n" -"frequently mapped to two different scan codes, apiece, since these\n" -"modifiers often appear on both the left and right sides of the keyboard.\n" -"\n" -"Scan Group\n" -"----------\n" -"There is one ScanGroup for each scan code generated by the given keyboard.\n" -"This number is given by KeyMapping::num_scan_codes. The first scan group\n" -"represents hardware scan code 0, the second represents scan code 1, etc.\n" -"\n" -" enum ModifierMask {\n" -" ALPHALOCK_MASK = 1 << 0,\n" -" SHIFT_MASK = 1 << 1,\n" -" CONTROL_MASK = 1 << 2,\n" -" ALTERNATE_MASK = 1 << 3,\n" -" CARRIAGE_RETURN_MASK = 1 << 4\n" -" };\n" -" #define NOT_BOUND 0xff\n" -"\n" -" struct ScanGroup {\n" -" number mask;\n" -" Character characters[...];\n" -" };\n" -"\n" -"For each scan code, `mask' defines which modifier combinations generate\n" -"characters. If `mask' is NOT_BOUND (0xff) then then this scan code does\n" -"not generate any characters ever, and its characters[] array is zero\n" -"length. Otherwise, the characters[] array contains one Character record\n" -"for each modifier combination.\n" -"\n" -"The number of records in characters[] is determined by computing (1 <<\n" -"bits_set_in_mask). In other words, if mask is zero, then zero bits are\n" -"set, so characters[] contains only one record. If `mask' is (SHIFT_MASK |\n" -"CONTROL_MASK), then two bits are set, so characters[] contains four\n" -"records.\n" -"\n" -"The first record always represents the character which is generated by that\n" -"key when no modifiers are active. The remaining records represent\n" -"characters generated by the various modifier combinations. Using the\n" -"example with the `shift' and `control' masks set, record two would\n" -"represent the character with the `shift' modifier active; record three, the\n" -"`control' modifier active; and record four, both the `shift' and `control'\n" -"modifiers active.\n" -"\n" -"As a special case, ALPHALOCK_MASK implies SHIFT_MASK, though only\n" -"ALPHALOCK_MASK appears in `mask'. In this case the same character is\n" -"generated for both the `shift' and `alpha-lock' modifiers, but only needs\n" -"to appear once in the characters[] array.\n" -"\n" -"CARRIAGE_RETURN_MASK does not actually refer to a modifier key. Instead,\n" -"it is used to distinguish the scan code which is given the special\n" -"pseudo-designation of `carriage return' key. Typically, this mask appears\n" -"solo in a ScanGroup record and only the two Character records for control-M\n" -"and control-C follow. This flag may be a throwback to an earlier time or\n" -"may be specially interpreted by the low-level keyboard driver, but its\n" -"purpose is otherwise enigmatic.\n" -"Character\n" -"---------\n" -"Each Character record indicates the character generated when this key is\n" -"pressed, as well as the character set which contains the character. Well\n" -"known character sets are `ASCII' and `Symbol'. The character set can also\n" -"be one of the meta values FUNCTION_KEY or KEY_SEQUENCE. If it is\n" -"FUNCTION_KEY then `char_code' represents a generally well-known function\n" -"key such as those enumerated by FunctionKey. If the character set is\n" -"KEY_SEQUENCE then `char_code' represents a zero-base index into\n" -"KeyMapping::sequence_lists[].\n" -"\n" -" enum CharacterSet {\n" -" ASCII = 0x00,\n" -" SYMBOL = 0x01,\n" -" ...\n" -" FUNCTION_KEY = 0xfe,\n" -" KEY_SEQUENCE = 0xff\n" -" };\n" -"\n" -" struct Character {\n" -" number set; // CharacterSet of generated character\n" -" number char_code; // Actual character generated\n" -" };\n" -"\n" -" enum FunctionKey {\n" -" F1 = 0x20, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12,\n" -" INSERT, DELETE, HOME, END, PAGE_UP, PAGE_DOWN, PRINT_SCREEN,\n" -" SCROLL_LOCK, PAUSE, SYS_REQUEST, BREAK, RESET, STOP, MENU, USER,\n" -" SYSTEM, PRINT, CLEAR_LINE, CLEAR_DISPLAY, INSERT_LINE,\n" -" DELETE_LINE, INSERT_CHAR, DELETE_CHAR, PREV, NEXT, SELECT\n" -" };\n" -"\n" -"Sequence\n" -"--------\n" -"When Character::set contains the meta value KEY_SEQUENCE, the scan code is\n" -"bound to a sequence of keys rather than a single character. A sequence is\n" -"a series of modifiers and characters which are automatically generated when\n" -"the associated key is depressed.\n" -"\n" -" #define MODIFIER_KEY 0xff\n" -"\n" -" struct Sequence {\n" -" number num_chars;\n" -" Character characters[...];\n" -" };\n" -"\n" -"Each generated Character is represented as previously described, with the\n" -"exception that MODIFIER_KEY may appear in place of KEY_SEQUENCE. When the\n" -"value of Character::set is MODIFIER_KEY then Character::char_code\n" -"represents a modifier key rather than an actual character. If the modifier\n" -"represented by `char_code' is non-zero, then it indicates that the\n" -"associated modifier key has been depressed. In this case, the value is one\n" -"of the constants enumerated by Modifier (SHIFT, CONTROL, ALTERNATE, etc.).\n" -"If the value is zero then it means that the modifier keys have been\n" -"released.\n" -"\n" -"Special Key\n" -"-----------\n" -"A special key is one which is scanned directly by the Mach kernel rather\n" -"than by the WindowServer. In general, events are not generated for special\n" -"keys.\n" -"\n" -" enum SpecialKeyType {\n" -" VOLUME_UP = 0,\n" -" VOLUME_DOWN,\n" -" BRIGHTNESS_UP,\n" -" BRIGHTNESS_DOWN,\n" -" ALPHA_LOCK,\n" -" HELP,\n" -" POWER,\n" -" SECONDARY_ARROW_UP,\n" -" SECONDARY_ARROW_DOWN\n" -" };\n" -"\n" -" struct SpecialKey {\n" -" number type; // A SpecialKeyType constant\n" -" number scan_code; // Actual scan code\n" -" };\n" -"\n", f ); - } - - -//----------------------------------------------------------------------------- -// Print an explanation of the output generated by this program. -//----------------------------------------------------------------------------- -static void print_output_info( FILE* f ) - { - fputs( -"What follows is an explanation and description of the various pieces of\n" -"information emitted by dumpkeymap.\n" -"\n" -"For a more thorough discussion of any particular piece of information\n" -"described here, refer to the detailed description of the internal layout of\n" -"a key mapping given by the --help-layout option.\n" -"\n" -"Conventions\n" -"-----------\n" -"Depending upon context, some numeric values are displayed in decimal\n" -"notation, whereas others are displayed in hexadecimal notation.\n" -"Hexadecimal numbers are denoted by a `0x' prefix (for instance, `0x7b'),\n" -"except when explicitly noted otherwise.\n" -"\n" -"Key Mapping Source\n" -"------------------\n" -"The first piece of information presented about a particular key mapping is\n" -"the source from which the data was gleaned. For a .keymapping file, the\n" -"title `KEYMAP FILE' is emitted along with the path and name of the file in\n" -"question. For the key mapping currently in use by the WindowServer and\n" -"AppKit, the title `ACTIVE KEYMAP' is emitted instead.\n" -"\n" -"Device Information\n" -"------------------\n" -"Each .keymapping file may contain one or more raw key mappings. For\n" -"example, a file which maps keys to a Dvorak-style layout might contain raw\n" -"mappings for Intel PC, ADB, NeXT, and Sun Type5 keyboards.\n" -"\n" -"For each raw mapping, the following information is emitted:\n" -"\n" -" o The title `KEYMAP' along with the mapping's relative position in the\n" -" .keymapping file.\n" -" o The `interface' identifier.\n" -" o The `handler_id' sub-identifier.\n" -" o The size of the raw mapping resource counted in bytes.\n" -"\n" -"The `interface' and `handler_id' values, taken together, define a specific\n" -"keyboard device. A .keyboard file, which describes the visual layout of a\n" -"keyboard, also contains `interface' and `handler_id' identifiers. The\n" -".keyboard file corresponding to a particular key mapping can be found by\n" -"matching the `interface' and `handler_id' values from each resource.\n" -"\n" -"Modifiers\n" -"---------\n" -"Each mapping may contain zero or more modifier records which associate\n" -"hardware scan codes with modifier descriptions such as `shift', `control',\n" -"`alternate', etc. The title `MODIFIERS' is printed along with the count of\n" -"modifier records which follow. For each modifier record, the modifier's\n" -"name is printed along with a list of scan codes, in hexadecimal format,\n" -"which generate that modifier value. For example:\n" -"\n" -" MODIFIERS [4]\n" -" alternate: 0x1d 0x60\n" -" control: 0x3a\n" -" keypad: 0x52 0x53 ... 0x63 0x62\n" -" shift: 0x2a 0x36\n" -"\n" -"Characters\n" -"----------\n" -"Each mapping may contain zero or more character records which associate\n" -"hardware scan codes with the actual characters generated by those scan\n" -"codes in the presence or absence of various modifier combinations. The\n" -"title `CHARACTERS' is printed along with the count of character records\n" -"which follow. Here is a highly abbreviated example:\n" -"\n" -" CHARACTERS [9]\n" -" scan 0x00: -AC-L \"a\" \"A\" \"^A\" \"^A\" ca c7 \"^A\" \"^A\"\n" -" scan 0x07: -AC-L \"x\" \"X\" \"^X\" \"^X\" 01/b4 01/ce \"^X\" \"^X\"\n" -" scan 0x0a: ---S- \"<\" \">\"\n" -" scan 0x13: -ACS- \"2\" \"@\" \"^@\" \"^@\" b2 b3 \"^@\" \"^@\"\n" -" scan 0x24: R---- \"^M\" \"^C\"\n" -" scan 0x3e: ----- [F4]\n" -" scan 0x4a: ----- [page up]\n" -" scan 0x60: ----- {seq#3}\n" -" scan 0x68: not-bound\n" -"\n" -"For each record, the hexadecimal value of the hardware scan code is\n" -"printed, followed by a list of modifier flag combinations and the actual\n" -"characters generated by this scan code with and without modifiers applied.\n" -"\n" -"The modifier flags field is composed of a combination of single letter\n" -"representations of the various modifier types. The letters stand for:\n" -"\n" -" L - alpha-lock\n" -" S - shift\n" -" C - control\n" -" A - alternate\n" -" R - carriage-return\n" -"\n" -"As a special case, the `alpha-lock' flag also implies the `shift' flag, so\n" -"these two flags never appear together in the same record.\n" -"\n" -"The combination of modifier flags determines the meaning and number of\n" -"fields which follow. The first field after the modifier flags always\n" -"represents the character that will be generated if no modifier keys are\n" -"depressed. The remaining fields represent characters generated by the\n" -"various modifier combinations. The order of the fields follows this\n" -"general pattern:\n" -"\n" -" o The character generated by this scan code when no modifiers are in\n" -" effect is listed first.\n" -"\n" -" o If the `L' or `S' flag is active, then the shifted character\n" -" generated by this scan code is listed next.\n" -"\n" -" o If the `C' flag is active, then the control-character generated by\n" -" this scan code is listed next. Furthermore, if the `L' or `S' flag\n" -" is also active, then the shifted control-character is listed after\n" -" that.\n" -"\n" -" o If the `A' flag is active, then the alternate-character generated by\n" -" this scan code is listed next. Furthermore, if the `L' or `S' flag\n" -" is active, then the shifted alternate-character is listed after that.\n" -" If the `C' flag is also active, then the alternate-control-character\n" -" is listed next. Finally, if the `C' and `L' or `C' and `S' flags are\n" -" also active, then the shifted alternate-control-character is listed.\n" -"\n" -"The `R' flag does not actually refer to a modifier key. Instead, it is\n" -"used to distinguish the scan code which is given the special\n" -"pseudo-designation of `carriage return' key. Typically, this mask appears\n" -"solo and only the two fields for control-M and control-C follow. This flag\n" -"may be a throwback to an earlier time or may be specially interpreted by\n" -"the low-level keyboard driver, but its purpose is otherwise enigmatic.\n" -"\n" -"Recalling the example from above, the following fields can be identified:\n" -"\n" -" scan 0x00: -AC-L \"a\" \"A\" \"^A\" \"^A\" ca c7 \"^A\" \"^A\"\n" -"\n" -" o Lower-case `a' is generated when no modifiers are active.\n" -" o Upper-case `A' is generated when `shift' or `alpha-lock' are active.\n" -" o Control-A is generated when `control' is active.\n" -" o Control-A is generated when `control' and `shift' are active.\n" -" o The character represented by the hexadecimal code 0xca is generated\n" -" when `alternate' is active.\n" -" o The character represented by 0xc7 is generated when `alternate' and\n" -" `shift' (or `alpha-lock') are active.\n" -" o Control-A is generated when `alternate' and `control' are active.\n" -" o Control-A is generated when `alternate', `control' and `shift' (or\n" -" `alpha-lock') are active.\n" -"\n" -"The notation used to represent a particular generated character varies.\n" -"\n" -" o Printable ASCII characters are quoted, as in \"x\" or \"X\".\n" -"\n" -" o Control-characters are quoted and prefixed with `^', as in \"^X\".\n" -"\n" -" o Characters with values greater than 127 (0x7f) are displayed as\n" -" hexadecimal values without the `0x' prefix.\n" -"\n" -" o Characters in a non-ASCII character set (such as `Symbol') are\n" -" displayed as two hexadecimal numbers separated by a slash, as in\n" -" `01/4a'. The first number is the character set's identification code\n" -" (such as `01' for the `Symbol' set), and the second number is the\n" -" value of the generated character.\n" -"\n" -" o Non-printing special function characters are displayed with the\n" -" function's common name enclosed in brackets, as in `[page up]' or\n" -" `[F4]'.\n" -"\n" -" o If the binding represents a key sequence rather than a single\n" -" character, then the sequence's identification number is enclosed in\n" -" braces, as in `{seq#3}'.\n" -"\n" -"Recalling a few examples from above, the following interpretations can be\n" -"made:\n" -"\n" -" scan 0x07: -AC-L \"x\" \"X\" \"^X\" \"^X\" 01/b4 01/ce \"^X\" \"^X\"\n" -" scan 0x3e: ----- [F4]\n" -" scan 0x4a: ----- [page up]\n" -" scan 0x60: ----- {seq#3}\n" -"\n" -" o \"x\" and \"X\" are printable ASCII characters.\n" -" o \"^X\" is a control-character.\n" -" o `01/b4' and `01/ce' represent the character codes 0xb4 and 0xce in\n" -" the `Symbol' character set.\n" -" o Scan code 0x3e generates function-key `F4', and scan code 0x4a\n" -" generates function-key `page up'.\n" -" o Scan code 0x60 is bound to key sequence #3.\n" -"\n" -"Finally, if a scan code is not bound to any characters, then it is\n" -"annotated with the label `not-bound', as with example scan code 0x68 from\n" -"above.\n" -"\n" -"Sequences\n" -"---------\n" -"A scan code (modified and unmodified) can be bound to a key sequence rather\n" -"than generating a single character or acting as a modifier. When it is\n" -"bound to a key sequence, a series of character invocations and modifier\n" -"actions are automatically generated rather than a single keystroke.\n" -"\n" -"Each mapping may contain zero or more key sequence records. The title\n" -"`SEQUENCES' is printed along with the count of sequence records which\n" -"follow. For example:\n" -"\n" -" SEQUENCES [3]\n" -" sequence 0: \"f\" \"o\" \"o\"\n" -" sequence 1: {alternate} \"b\" \"a\" \"r\" {unmodify}\n" -" sequence 2: [home] \"b\" \"a\" \"z\"\n" -"\n" -"The notation used to represent the sequence of generated characters is\n" -"identical to the notation already described in the `Characters' section\n" -"above, with the exception that modifier actions may be interposed between\n" -"generated characters. Such modifier actions are represented by the\n" -"modifier's name enclosed in braces. The special name `{unmodify}'\n" -"indicates the release of the modifier keys.\n" -"\n" -"Thus, the sequences in the above example can be interpreted as follows:\n" -"\n" -" o Sequence #0 generates `foo'.\n" -" o Sequence #1 invokes the `alternate' modifier, generates `bar', and\n" -" then releases `alternate'.\n" -" o Sequence #2 invokes the `home' key and then generates `baz'. In a\n" -" text editor, this would probably result in `baz' being prepended to\n" -" the line of text on which the cursor resides.\n" -"\n" -"Special Keys\n" -"------------\n" -"Certain keyboards feature keys which perform some type of special purpose\n" -"function rather than generating a character or acting as a modifier. For\n" -"instance, Apple keyboards often contain a `power' key, and NeXT keyboards\n" -"have historically featured screen brightness and volume control keys.\n" -"\n" -"Each mapping may contain zero or more special-key records which associate\n" -"hardware scan codes with such special purpose functions. The title\n" -"`SPECIALS' is printed along with the count of records which follow. For\n" -"each record, the special function's name is printed along with a list of\n" -"scan codes, in hexadecimal format, which are bound to that function. For\n" -"example:\n" -"\n" -" SPECIALS [6]\n" -" alpha-lock: 0x39\n" -" brightness-down: 0x79\n" -" brightness-up: 0x74\n" -" power: 0x7f\n" -" sound-down: 0x77\n" -" sound-up: 0x73\n" -"\n", f ); - } - - -//----------------------------------------------------------------------------- -// Print a summary of the various files and directories which are related to -// key mappings. -//----------------------------------------------------------------------------- -static void print_files_info( FILE* f ) - { - fputs( -"This is a summary of the various files and directories which are related to\n" -"key mappings.\n" -"\n" -"*.keymapping\n" -" A key mapping file which precisely defines the relationship of all\n" -" hardware-specific keyboard scan-codes with their associated\n" -" functionality.\n" -"\n" -"*.keyboard\n" -" A file describing the physical layout of keys on a particular type of\n" -" keyboard. Each `key' token in this file defines the position and shape\n" -" of the key on the keyboard, as well as the associated scan code which\n" -" that key generates. A .keymapping file, on the other hand, defines the\n" -" characters which are generated by a particular scan code depending upon\n" -" the state of the various modifier keys (such as shift, control, etc.).\n" -" The `interface' and `handler_id' values from a .keymapping file are\n" -" matched against those in each .keyboard file in order to associate a\n" -" particular .keyboard file with a key mapping. Various GUI programs use\n" -" the .keyboard file to display a visual representation of a keyboard for\n" -" the user. Since these files are just plain text, they can be easily\n" -" viewed and interpreted without the aid of a specialized program, thus\n" -" dumpkeymap leaves these files alone.\n" -"\n" -"/System/Library/Keyboards\n" -"/Network/Library/Keyboards\n" -"/Local/Library/Keyboards\n" -"/Library/Keyboards\n" -" Repositories for .keymapping and .keyboard files for MacOS/X, Darwin,\n" -" and MacOS/X Server.\n" -"\n" -"/NextLibrary/Keyboards\n" -"/LocalLibrary/Keyboards\n" -" Repositories for .keymapping and .keyboard files for OpenStep and\n" -" NextStep.\n" -"\n" -"$(HOME)/Library/Keyboards\n" -" Repository for personal .keymapping and .keyboard files.\n" -"\n", f ); - } - - -//----------------------------------------------------------------------------- -// Print a list of the various diagnostic messages which may be emitted. -//----------------------------------------------------------------------------- -static void print_diagnostics_info( FILE* f ) - { - fputs( -"The following diagnostic messages may be issued to the standard error\n" -"stream.\n" -"\n" -"Unrecognized option.\n" -" An unrecognized option was specified on the command-line. Invoke\n" -" dumpkeymap with the --help option to view a list of valid options.\n" -"\n" -"Insufficient data in keymapping data stream.\n" -" The key mapping file or data stream is corrupt. Either the file has\n" -" been incorrectly truncated or a field, such as those which indicates\n" -" the number of variable records which follow, contains a corrupt value.\n" -"\n" -"The following diagnostic messages have significance only when trying to\n" -"print .keymapping files mentioned on the command-line.\n" -"\n" -"Bad magic number.\n" -" The mentioned file is not a .keymapping file. The file's content does\n" -" not start with the string `KYM1'.\n" -"\n" -"Unable to open key mapping file.\n" -" The call to fopen() failed; probably because the specified path is\n" -" invalid or dumpkeymap does not have permission to read the file.\n" -"\n" -"Unable to determine key mapping file size.\n" -" The call to fstat() failed, thus memory can not be allocated for\n" -" loading the file.\n" -"\n" -"Unable to read key mapping file.\n" -" The call to fread() failed.\n" -"\n" -"The following diagnostic messages have significance only when trying to\n" -"print the currently active key mapping when no .keymapping files have been\n" -"mentioned on the command-line.\n" -"\n" -"Unable to open event status driver.\n" -" The call to NXOpenEventStatus() failed.\n" -"\n" -"Bad key mapping length.\n" -" The call to NXKeyMappingLength() returned a bogus value.\n" -"\n" -"Unable to get current key mapping.\n" -" The call to NXGetKeyMapping() failed.\n" -"\n" -"The following diagnostic messages have significance only when using\n" -"dumpkeymap on a non-Apple/NeXT platform.\n" -"\n" -"Must specify at least one .keymapping file.\n" -" No .keymapping files were mentioned on the command-line. On\n" -" non-Apple/NeXT platforms, there is no concept of a currently active\n" -" .keymapping file, so at least one file must be mentioned on the\n" -" command-line.\n" -"\n", f ); - } - - -//----------------------------------------------------------------------------- -// Print warranty. -//----------------------------------------------------------------------------- -static void print_warranty( FILE* f ) - { - fputs( -"This software is provided by the author `AS IS' and any express or implied\n" -"WARRANTIES, including, but not limited to, the implied warranties of\n" -"MERCHANTABILITY and FITNESS FOR A PARTICULAR PURPOSE are DISCLAIMED. In NO\n" -"EVENT shall the author be LIABLE for any DIRECT, INDIRECT, INCIDENTAL,\n" -"SPECIAL, EXEMPLARY, or CONSEQUENTIAL damages (including, but not limited\n" -"to, procurement of substitute goods or services; loss of use, data, or\n" -"profits; or business interruption) however caused and on any theory of\n" -"liability, whether in contract, strict liability, or tort (including\n" -"negligence or otherwise) arising in any way out of the use of this\n" -"software, even if advised of the possibility of such damage.\n" -"\n", f ); - } - - -//----------------------------------------------------------------------------- -// Print this program's version number. -//----------------------------------------------------------------------------- -static void print_version( FILE* f ) - { - fputs( "Version " PROG_VERSION " (built " __DATE__ ")\n\n", f ); - } - - -//----------------------------------------------------------------------------- -// Print a usage summary. -//----------------------------------------------------------------------------- -static void print_usage( FILE* f ) - { - fputs( -"Usage: dumpkeymap [options] [-] [file ...]\n" -"\n" -"Prints a textual representation of each Apple/NeXT .keymapping file\n" -"mentioned on the command-line. If no files are mentioned and if the local\n" -"machine is an Apple or NeXT installation, then the key mapping currently in\n" -"use by the WindowServer and the AppKit is printed instead.\n" -"\n" -"Options:\n" -" -h --help\n" -" Display general program instructions and option summary.\n" -"\n" -" -k --help-keymapping\n" -" Display a detailed description of the internal layout of a\n" -" .keymapping file.\n" -"\n" -" -o --help-output\n" -" Display an explanation of the output generated by dumpkeymap when\n" -" dissecting a .keymapping file.\n" -"\n" -" -f --help-files\n" -" Display a summary of the various files and directories which are\n" -" related to key mappings.\n" -"\n" -" -d --help-diagnostics\n" -" Display a list of the various diagnostic messages which may be\n" -" emitted by dumpkeymap.\n" -"\n" -" -v --version\n" -" Display the dumpkeymap version number and warranty information.\n" -"\n" -" - --\n" -" Inhibit processing of options at this point in the argument list.\n" -" An occurrence of `-' or `--' in the argument list causes all\n" -" following arguments to be treated as file names even if an argument\n" -" begins with a `-' character.\n" -"\n", f ); - } - - -//----------------------------------------------------------------------------- -// Print an informational banner. -//----------------------------------------------------------------------------- -static void print_banner( FILE* f ) - { - fputs( "\n" PROG_NAME " v" PROG_VERSION " by " AUTHOR_INFO "\n" - COPYRIGHT "\n\n", f ); - } - - -//----------------------------------------------------------------------------- -// Process command-line arguments. Examine options first; collecting files -// along the way. If all is well, process collected file list. -//----------------------------------------------------------------------------- -int main( int const argc, char const* const argv[] ) - { - int rc = 0, i, nfiles = 0, more_options = 1, process_files = 1; - int* files = (int*)calloc( argc - 1, sizeof(int) ); - print_banner( stdout ); - - for (i = 1; i < argc; i++) - { - char const* const s = argv[i]; - if (!more_options || *s != '-') - files[ nfiles++ ] = i; - else - { - OPT_SWITCH(s) - OPT_CASE(-,--) - more_options = 0; - OPT_CASE(-h,--help) - print_usage( stdout ); - process_files = 0; - OPT_CASE(-k,--help-keymapping) - print_internal_layout_info( stdout ); - process_files = 0; - OPT_CASE(-o,--help-output) - print_output_info( stdout ); - process_files = 0; - OPT_CASE(-f,--help-files) - print_files_info( stdout ); - process_files = 0; - OPT_CASE(-d,--help-diagnostics) - print_diagnostics_info( stdout ); - process_files = 0; - OPT_CASE(-v,--version) - print_version( stdout ); - print_warranty( stdout ); - process_files = 0; - OPT_DEFAULT - fprintf( stderr, "ERROR: Unrecognized option: %s\n\n", s ); - process_files = 0; - rc = 1; - OPT_SWITCH_END - } - } - - if (process_files) - { - if (nfiles == 0) - rc = handle_empty_document_list(); - else - for (i = 0; i < nfiles; i++) - rc |= unparse_keymap_file( argv[files[i]] ); - } - - free( files ); - return rc; - } |