1 files changed, 0 insertions, 192 deletions
diff --git a/nx-X11/programs/Xserver/hw/xfree86/os-support/linux/lnx_apm.c b/nx-X11/programs/Xserver/hw/xfree86/os-support/linux/lnx_apm.c
deleted file mode 100644
index bd78d877f..000000000
--- a/nx-X11/programs/Xserver/hw/xfree86/os-support/linux/lnx_apm.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/* $XFree86: xc/programs/Xserver/hw/xfree86/os-support/linux/lnx_apm.c,v 3.12 2001/12/24 22:54:31 dawes Exp $ */
-
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#include <X11/X.h>
-#include "os.h"
-#include "xf86.h"
-#include "xf86Priv.h"
-#define XF86_OS_PRIVS
-#include "xf86_OSproc.h"
-#include "lnx.h"
-#include <linux/apm_bios.h>
-#include <unistd.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <errno.h>
- 
-#define APM_PROC   "/proc/apm"
-#define APM_DEVICE "/dev/apm_bios"
-
-#ifndef APM_STANDBY_FAILED
-# define APM_STANDBY_FAILED 0xf000
-#endif
-#ifndef APM_SUSPEND_FAILED
-# define APM_SUSPEND_FAILED 0xf001
-#endif
-
-static PMClose lnxAPMOpen(void);
-extern PMClose lnxACPIOpen(void);
-static void lnxCloseAPM(void);
-static pointer APMihPtr = NULL;
-
-static struct {
-    apm_event_t apmLinux;
-    pmEvent xf86;
-} LinuxToXF86[] = {
-    { APM_SYS_STANDBY, XF86_APM_SYS_STANDBY },
-    { APM_SYS_SUSPEND, XF86_APM_SYS_SUSPEND },
-    { APM_NORMAL_RESUME, XF86_APM_NORMAL_RESUME },
-    { APM_CRITICAL_RESUME, XF86_APM_CRITICAL_RESUME },
-    { APM_LOW_BATTERY, XF86_APM_LOW_BATTERY },
-    { APM_POWER_STATUS_CHANGE, XF86_APM_POWER_STATUS_CHANGE },
-    { APM_UPDATE_TIME, XF86_APM_UPDATE_TIME },
-    { APM_CRITICAL_SUSPEND, XF86_APM_CRITICAL_SUSPEND },
-    { APM_USER_STANDBY, XF86_APM_USER_STANDBY },
-    { APM_USER_SUSPEND, XF86_APM_USER_SUSPEND },
-    { APM_STANDBY_RESUME, XF86_APM_STANDBY_RESUME },
-#if defined(APM_CAPABILITY_CHANGED)
-    { APM_CAPABILITY_CHANGED, XF86_CAPABILITY_CHANGED },
-#endif
-#if 0
-    { APM_STANDBY_FAILED, XF86_APM_STANDBY_FAILED },
-    { APM_SUSPEND_FAILED, XF86_APM_SUSPEND_FAILED }
-#endif
-};
-
-#define numApmEvents (sizeof(LinuxToXF86) / sizeof(LinuxToXF86[0]))
-
-/*
- * APM is still under construction.
- * I'm not sure if the places where I initialize/deinitialize
- * apm is correct. Also I don't know what to do in SETUP state.
- * This depends if wakeup gets called in this situation, too.
- * Also we need to check if the action that is taken on an
- * event is reasonable.
- */
-static int
-lnxPMGetEventFromOs(int fd, pmEvent *events, int num)
-{
-    int i,j,n;
-    apm_event_t linuxEvents[8];
-
-    if ((n = read( fd, linuxEvents, num * sizeof(apm_event_t) )) == -1)
-	return 0;
-    n /= sizeof(apm_event_t);
-    if (n > num)
-	n = num;
-    for (i = 0; i < n; i++) {
-	for (j = 0; j < numApmEvents; j++)
-	    if (LinuxToXF86[j].apmLinux == linuxEvents[i]) {
-		events[i] = LinuxToXF86[j].xf86;
-		break;
-	    }
-	if (j == numApmEvents)
-	    events[i] = XF86_APM_UNKNOWN;
-    }
-    return n;
-}
-
-static pmWait
-lnxPMConfirmEventToOs(int fd, pmEvent event)
-{
-    switch (event) {
-    case XF86_APM_SYS_STANDBY:
-    case XF86_APM_USER_STANDBY:
-        if (ioctl( fd, APM_IOC_STANDBY, NULL ))
-	    return PM_FAILED;
-	return PM_CONTINUE;
-    case XF86_APM_SYS_SUSPEND:
-    case XF86_APM_CRITICAL_SUSPEND:
-    case XF86_APM_USER_SUSPEND:
-	if (ioctl( fd, APM_IOC_SUSPEND, NULL )) {
-	    /* I believe this is wrong (EE)
-	       EBUSY is sent when a device refuses to be suspended.
-	       In this case we still need to undo everything we have
-	       done to suspend ourselves or we will stay in suspended
-	       state forever. */
-	    if (errno == EBUSY)
-		return PM_CONTINUE;
-	    else
-		return PM_FAILED;
-	}
-	return PM_CONTINUE;
-    case XF86_APM_STANDBY_RESUME:
-    case XF86_APM_NORMAL_RESUME:
-    case XF86_APM_CRITICAL_RESUME:
-    case XF86_APM_STANDBY_FAILED:
-    case XF86_APM_SUSPEND_FAILED:
-	return PM_CONTINUE;
-    default:
-	return PM_NONE;
-    }
-}
-
-PMClose
-xf86OSPMOpen(void)
-{
-	PMClose ret = NULL;
-
-	/* Favour ACPI over APM, but only when enabled */
-
-	if (!xf86acpiDisableFlag)
-		ret = lnxACPIOpen();
-
-	if (!ret)
-		ret = lnxAPMOpen();
-
-	return ret;
-}
-
-static PMClose
-lnxAPMOpen(void)
-{
-    int fd, pfd;    
-
-#ifdef DEBUG
-    ErrorF("APM: OSPMOpen called\n");
-#endif
-    if (APMihPtr || !xf86Info.pmFlag)
-	return NULL;
-   
-#ifdef DEBUG
-    ErrorF("APM: Opening device\n");
-#endif
-    if ((fd = open( APM_DEVICE, O_RDWR )) > -1) {
-	if (access( APM_PROC, R_OK ) ||
-	    ((pfd = open( APM_PROC, O_RDONLY)) == -1)) {
-	    xf86MsgVerb(X_WARNING,3,"Cannot open APM (%s) (%s)\n",
-			APM_PROC, strerror(errno));
-	    close(fd);
-	    return NULL;
-	} else
-	    close(pfd);
-	xf86PMGetEventFromOs = lnxPMGetEventFromOs;
-	xf86PMConfirmEventToOs = lnxPMConfirmEventToOs;
-	APMihPtr = xf86AddInputHandler(fd,xf86HandlePMEvents,NULL);
-	xf86MsgVerb(X_INFO,3,"Open APM successful\n");
-	return lnxCloseAPM;
-    }
-    xf86MsgVerb(X_INFO,3,"No APM support in BIOS or kernel\n");
-    return NULL;
-}
-
-static void
-lnxCloseAPM(void)
-{
-    int fd;
-    
-#ifdef DEBUG
-   ErrorF("APM: Closing device\n");
-#endif
-    if (APMihPtr) {
-	fd = xf86RemoveInputHandler(APMihPtr);
-	close(fd);
-	APMihPtr = NULL;
-    }
-}
-