aboutsummaryrefslogtreecommitdiff
path: root/nx-X11/programs/Xserver/hw
diff options
context:
space:
mode:
Diffstat (limited to 'nx-X11/programs/Xserver/hw')
-rw-r--r--nx-X11/programs/Xserver/hw/nxagent/man/nxagent.1997
1 files changed, 976 insertions, 21 deletions
diff --git a/nx-X11/programs/Xserver/hw/nxagent/man/nxagent.1 b/nx-X11/programs/Xserver/hw/nxagent/man/nxagent.1
index f92393893..a97204afe 100644
--- a/nx-X11/programs/Xserver/hw/nxagent/man/nxagent.1
+++ b/nx-X11/programs/Xserver/hw/nxagent/man/nxagent.1
@@ -1,37 +1,992 @@
-.TH NXAGENT 1
+
+.\" Copyright 1984 - 1991, 1993, 1994, 1998 The Open Group
+.\" Copyright 2011 - 2016, Mike Gabriel <mike.gabriel@das-netzwerkteam.de>
+.\"
+.\" Permission to use, copy, modify, distribute, and sell this software and its
+.\" documentation for any purpose is hereby granted without fee, provided that
+.\" the above copyright notice appear in all copies and that both that
+.\" copyright notice and this permission notice appear in supporting
+.\" documentation.
+.\"
+.\" The above copyright notice and this permission notice shall be included
+.\" in all copies or substantial portions of the Software.
+.\"
+.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+.\" OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+.\" IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
+.\" OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+.\" ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+.\" OTHER DEALINGS IN THE SOFTWARE.
+.\"
+.\" Except as contained in this notice, the name of The Open Group shall
+.\" not be used in advertising or otherwise to promote the sale, use or
+.\" other dealings in this Software without prior written authorization
+.\" from The Open Group.
+.ds q \N'34'
+.TH NXAGENT 1 3.6.x
.SH NAME
-nxagent \- NoMachine's NX Agent.
+nxagent \- nx-X11 Agent (nested Xserver optimized for remote computing)
.SH SYNOPSIS
.B nxagent
.I "[options]"
-
.SH DESCRIPTION
\fBnxagent\fR is an Xnest-like X server for remote application/desktop access.
.PP
-\fBnxagent\fR implements a very efficient compression of the X11 protocol.
+\fBnxagent\fR implements a very efficient compression of the X11
+protocol, called the NX protocol.
+.PP
+The NX protocol increases performance when using X applications over high
+latency and low bandwidth networks, while providing a local (LAN-like)
+usage experience even if connecting from off-site locations (via cable
+modem or GSM).
+.PP
+\fBnxagent\fR can be used standalone as a nested X server (with NX
+protocol disabled), but its real benefits are gained when using it over
+remote connections via the nxcomp compression library. The counterpart
+application on the other end (i.e. the client) is called
+\fBnxproxy\fR.
.PP
-This increases performance when using X applications over high latency and
-low bandwidth networks, while providing a local (LAN-like) usage experience
-even if connecting from off-site locations (via cable modem or GSM).
+When used in proxy <-> agent mode, \fBnxagent\fR adds the feature of
+being suspendible. Sessions can be started from one client, suspended and
+then resumed from another client.
.PP
-\fBnxagent\fR is not designed to be used as a standalone application.
-It has to be launched on the server side by remote desktop frameworks like FreeNX.
+\fBnxagent\fR and \fBnxproxy\fR are utilized by various remote
+application/desktop frameworks for providing server-side GUI application
+access from remote client systems.
+.PP
+Currently, nx-X11 Agent is co-maintained by three of these projects: The
+Arctica Project, TheQVD and X2Go.
.PP
-Available clients are
-NoMachine's \fBnxclient\fR or the community projects \fBqtnx\fR and \fBremmina\fR
-(with NX plugin).
+
+.SH "STARTING THE SERVER"
+The nx-X11 Agent should be run in user space. Other than the system's
+local X.org server, \fBnxagent\fR does not require to be run as root.
+When bundled with a remote application framework, you normally don't have
+to launch \fBnxagent\fR manually. nx-X11 Agent startup is normally
+managed by the underlying framework (e.g. Arctica Session Manager, X2Go
+Server, etc.).
+.PP
+When the nx-X11 Agent starts up (e.g. by typing 'nxagent -ac :1' in a
+terminal window), it typically launches in "windowed desktop" mode. On
+your local X server, there appears a new window being an X server itself.
+.PP
+However, nx-X11 Agent also supports rootless (or seamless) application
+mode and a shadow session mode (similar to what VNC does).
+.PP
+Example: You can launch a complete desktop session inside this nested X
+server now:
+.TP 8
+The Debian way...
+.PP
+.nf
+ $ export DISPLAY=:1
+ $ STARTUP=mate-session /etc/X11/Xsession
+.fi
+.TP 8
+The Fedora / Gentoo / openSUSE way...
+.PP
+.nf
+ ### FIXME / TODO ###
+.fi
+.PP
+However, nx-X11 Agent also supports rootless (or seamless) application
+mode and a shadow session mode (similar to what VNC does).
.SH OPTIONS
-.TP
+The nx-X11 agent accepts a range of default X server options as described
+below. Those default options have to be provided via the command line.
+
+Furthermore, the nx-X11 Agent accepts some nx-X11 specific options,
+described further below.
+
+Last but not least, the nx-X11 Agent accepts several more options
+provided via the $DISPLAY environment variable, the so-called nx/nx
+options. See below for further details.
+
+.SH STANDARD XSERVER OPTIONS
+.TP 8
+.B :\fIdisplaynumber\fP
+The X server runs as the given \fIdisplaynumber\fP, which by default is 0.
+If multiple X servers are to run simultaneously on a host, each must have
+a unique display number. See the DISPLAY
+NAMES section of the \fIX\fP(__miscmansuffix__) manual page to learn how to
+specify which display number clients should try to use.
+.TP 8
+.B \-a \fInumber\fP
+sets pointer acceleration (i.e. the ratio of how much is reported to how much
+the user actually moved the pointer).
+.TP 8
+.B \-ac
+disables host-based access control mechanisms. Enables access by any host,
+and permits any host to modify the access control list.
+Use with extreme caution.
+This option exists primarily for running test suites remotely.
+.TP 8
+.B \-audit \fIlevel\fP
+sets the audit trail level. The default level is 1, meaning only connection
+rejections are reported. Level 2 additionally reports all successful
+connections and disconnects. Level 4 enables messages from the
+SECURITY extension, if present, including generation and revocation of
+authorizations and violations of the security policy.
+Level 0 turns off the audit trail.
+Audit lines are sent as standard error output.
+.TP 8
+.B \-auth \fIauthorization-file\fP
+specifies a file which contains a collection of authorization records used
+to authenticate access. See also the \fIxdm\fP(1) and
+\fIXsecurity\fP(__miscmansuffix__) manual pages.
+.TP 8
+.B bc
+disables certain kinds of error checking, for bug compatibility with
+previous releases (e.g., to work around bugs in R2 and R3 xterms and toolkits).
+Deprecated.
+.TP 8
+.B \-bs
+disables backing store support on all screens.
+.TP 8
+.B \-br
+sets the default root window to solid black instead of the standard root weave
+pattern.
+.TP 8
+.B \-c
+turns off key-click.
+.TP 8
+.B c \fIvolume\fP
+sets key-click volume (allowable range: 0-100).
+.TP 8
+.B \-cc \fIclass\fP
+sets the visual class for the root window of color screens.
+The class numbers are as specified in the X protocol.
+Not obeyed by all servers.
+.TP 8
+.B \-co \fIfilename\fP
+sets name of RGB color database. The default is
+.IR /usr/share/nx/rgb .
+.ig
+.TP 8
+.B \-config \fIfilename\fP
+reads more options from the given file. Options in the file may be separated
+by newlines if desired. If a '#' character appears on a line, all characters
+between it and the next newline are ignored, providing a simple commenting
+facility. The \fB\-config\fP option itself may appear in the file.
+.BR NOTE :
+This option is disabled when the Xserver is run with an effective uid
+different from the user's real uid.
+..
+.TP 8
+.B \-core
+causes the server to generate a core dump on fatal errors.
+.TP 8
+.B \-deferglyphs \fIwhichfonts\fP
+specifies the types of fonts for which the server should attempt to use
+deferred glyph loading. \fIwhichfonts\fP can be all (all fonts),
+none (no fonts), or 16 (16 bit fonts only).
+.TP 8
+.B \-dpi \fIresolution\fP
+sets the resolution for all screens, in dots per inch.
+To be used when the server cannot determine the screen size(s) from the
+hardware.
+.TP 8
+.B dpms
+enables DPMS (display power management services), where supported. The
+default state is platform and configuration specific.
+.TP 8
+.B \-dpms
+disables DPMS (display power management services). The default state
+is platform and configuration specific.
+.TP 8
+.B \-f \fIvolume\fP
+sets feep (bell) volume (allowable range: 0-100).
+.TP 8
+.B \-fc \fIcursorFont\fP
+sets default cursor font.
+.TP 8
+.B \-fn \fIfont\fP
+sets the default font.
+.TP 8
+.B \-fp \fIfontPath\fP
+sets the search path for fonts. This path is a comma separated list
+of directories which the X server searches for font databases.
+See the FONTS section of this manual page for more information and the default
+list.
+.TP 8
.B \-help
-Lists all others options that are not listed here.
+prints a usage message.
+.TP 8
+.B \-I
+causes all remaining command line arguments to be ignored.
+.TP 8
+.B \-maxbigreqsize \fIsize\fP
+sets the maxmium big request to
+.I size
+MB.
+.TP 8
+.B \-nolisten \fItrans-type\fP
+disables a transport type. For example, TCP/IP connections can be disabled
+with
+.BR "\-nolisten tcp" .
+This option may be issued multiple times to disable listening to different
+transport types.
+.TP 8
+.B \-noreset
+prevents a server reset when the last client connection is closed. This
+overrides a previous
+.B \-terminate
+command line option.
+.TP 8
+.B \-p \fIminutes\fP
+sets screen-saver pattern cycle time in minutes.
+.TP 8
+.B \-pn
+permits the server to continue running if it fails to establish all of
+its well-known sockets (connection points for clients), but
+establishes at least one. This option is set by default.
+.TP 8
+.B \-nopn
+causes the server to exit if it fails to establish all of its well-known
+sockets (connection points for clients).
+.TP 8
+.B \-r
+turns off auto-repeat.
+.TP 8
+.B r
+turns on auto-repeat.
+.TP 8
+.B \-s \fIminutes\fP
+sets screen-saver timeout time in minutes.
+.TP 8
+.B \-su
+disables save under support on all screens.
+.TP 8
+.B \-t \fInumber\fP
+sets pointer acceleration threshold in pixels (i.e. after how many pixels
+pointer acceleration should take effect).
+.TP 8
+.B \-terminate
+causes the server to terminate at server reset, instead of continuing to run.
+This overrides a previous
+.B \-noreset
+command line option.
+.TP 8
+.B \-to \fIseconds\fP
+sets default connection timeout in seconds.
+.TP 8
+.B \-tst
+disables all testing extensions (e.g., XTEST, XTrap, XTestExtension1, RECORD).
+.TP 8
+.B tty\fIxx\fP
+ignored, for servers started the ancient way (from init).
+.TP 8
+.B v
+sets video-off screen-saver preference.
+.TP 8
+.B \-v
+sets video-on screen-saver preference.
+.TP 8
+.B \-wm
+forces the default backing-store of all windows to be WhenMapped. This
+is a backdoor way of getting backing-store to apply to all windows.
+Although all mapped windows will have backing store, the backing store
+attribute value reported by the server for a window will be the last
+value established by a client. If it has never been set by a client,
+the server will report the default value, NotUseful. This behavior is
+required by the X protocol, which allows the server to exceed the
+client's backing store expectations but does not provide a way to tell
+the client that it is doing so.
+.TP 8
+.B \-x \fIextension\fP
+loads the specified extension at init.
+This is a no-op for most implementations.
+.TP 8
+.B [+-]xinerama
+enables(+) or disables(-) XINERAMA provided via the PanoramiX extension. This is
+set to off by default.
+.TP 8
+.B [+-]rrxinerama
+enables(+) or disables(-) XINERAMA provided via the RandR extension. By
+default, this feature is enabled. To disable XINERAMA completely, make
+sure to use both options (-xinerama -rrxinerama) on the command line.
+
+.SH SERVER DEPENDENT OPTIONS
+The nx-X11 Xserver (i.e. \fBnxagent\fR) additionally accepts the following options (non-standard options, dependent on Xserver implementation):
+.TP 8
+.B \-logo
+turns on the X Window System logo display in the screen-saver.
+There is currently no way to change this from a client.
+.TP 8
+.B nologo
+turns off the X Window System logo display in the screen-saver.
+There is currently no way to change this from a client.
+.TP 8
+.B \-render
+.BR default | mono | gray | color
+sets the color allocation policy that will be used by the render extension.
+.RS 8
+.TP 8
+.I default
+selects the default policy defined for the display depth of the X
+server.
+.TP 8
+.I mono
+don't use any color cell.
+.TP 8
+.I gray
+use a gray map of 13 color cells for the X render extension.
+.TP 8
+.I color
+use a color cube of at most 4*4*4 colors (that is 64 color cells).
+.RE
+.TP 8
+.B \-dumbSched
+disables smart scheduling on platforms that support the smart scheduler.
+.TP
+.B \-schedInterval \fIinterval\fP
+sets the smart scheduler's scheduling interval to
+.I interval
+milliseconds.
+.SH NXAGENT SPECIFIC OPTIONS
+The nx-X11 system adds the following command line arguments:
+.TP 8
+.B \-forcenx
+force use of NX protocol messages assuming communication through nxproxy
+.TP 8
+.B \-timeout \fIint\fP
+auto-disconnect timeout in seconds (minimum allowed: 60)
+.TP 8
+.B \-norootlessexit
+don't exit if there are no clients in rootless mode
+.TP 8
+.B \-norender
+disable the use of the render extension
+.TP 8
+.B \-nocomposite
+disable the use of the composite extension
+.TP 8
+.B \-nopersistent
+disable disconnection/reconnection to the X display on SIGHUP
+.TP 8
+.B \-noshmem
+disable use of shared memory extension
+.TP 8
+.B \-shmem
+enable use of shared memory extension
+.TP 8
+.B \-noshpix
+disable use of shared pixmaps
+.TP 8
+.B \-shpix
+enable use of shared pixmaps
+.TP 8
+.B \-noignore
+don't ignore pointer and keyboard configuration changes mandated by clients
+.TP 8
+.B \-nokbreset
+don't reset keyboard device if the session is resumed
+.TP 8
+.B \-noxkblock
+always allow applications to change layout through XKEYBOARD
+.TP 8
+.B \-tile WxH
+size of image tiles (minimum allowed: 32x32)
+.TP 8
+.B \-D
+enable desktop mode (default)
+.TP 8
+.B \-R
+enable rootless mode
+.TP 8
+.B \-S
+enable shadow mode
+.TP 8
+.B \-B
+enable proxy binding mode
+.PP
+Other than the command line options, \fBnxagent\fR can be configured at
+session startup and at runtime (i.e. when resuming a suspended session)
+by so-called nx/nx options.
+.PP
+As nx/nx options all options supported by nxcomp (see \fBnxproxy\fR man
+page) and all nxagent nx/nx options (see below) can be used.
+.
+When launching an nxcomp based nx-X11 agent session (i.e. proxy <->
+agent), you will normally set the $DISPLAY variable like this:
+.PP
+.nf
+ $ export DISPLAY=nx/nx,listen=<proxy-port>,options=<options.file>:<nx-display-port>
+ $ nxagent <cmdline-options> :<nx-display-port>
+.fi
+.PP
+The value for <nx-display-port> is some value of a not-yet-used X11
+display (e.g. :50).
+.PP
+Using an options file is recommended, but you can also put available
+nx/nx options (see below) into the DISPLAY variable directly. Note, that
+the $DISPLAY variable field is of limited length.
+.PP
+As <proxy-port> you can pick an arbitrary (unused) TCP port or Unix
+socket file path. This is the port / socket that you have to connect to
+with the \fBnxproxy\fR application.
+.PP
+Available nx-X11 Agent options (as an addition to nx/nx options supported
+by nxcomp already):
+.TP 8
+.B options=<string>
+read options from file, this text file can contain a single loooong line with comma-separated nx/nx options
+.TP 8
+.B rootless=<bool>
+start \fBnxagent\fR in rootless mode, matches \-R given on the command line, no-op when resuming (default: false)
+.TP 8
+.B geometry=<string>
+desktop geometry when starting or resuming a session, no-op in rootless mode (default 66% of the underlying X server geometry)
+.TP 8
+.B resize=<bool>
+set resizing support (default: true)
+.TP 8
+.B fullscreen=<bool>
+start or resume a session in fullscreen mode (default: off)
+.TP 8
+.B keyboard=<string>
+set remote keyboard layout
+.TP 8
+.B clipboard=<string>
+enable / disable (set to: \fInone\fR) clipboard support, uni-directional (\fIserver\fR or \fIclient\fR) or bi-directional (\fIboth\fR, default setting) support
+.TP 8
+.B streaming=<int>
+streaming support for images, not fully implemented yet and thus non-functional
+.TP 8
+.B backingstore=<int>
+disable or enforce backing store support (default: BackingStoreUndefined)
+.TP 8
+.B composite=<int>
+enable or disable Compsite support in \fBnxagent\fR (default: enabled)
+.TP 8
+.B xinerama=<int>
+enable or disable XINERAMA support in \fBnxagent\fR (default: enabled)
+.TP 8
+.B shmem=<bool>
+enable using shared memory
+.TP 8
+.B shpix=<bool>
+enable shared pixmaps support
+.TP 8
+.B kbtype=<string>
+set remote keyboard type
+.TP 8
+.B client=<string>
+type of connecting operating system (supported: \fIlinux\fR, \fIwindows\fR, \fIsolaris\fR and \fImacosx\fR)
+.TP 8
+.B shadow=<int>
+start \fBnxagent\fR in shadow mode, matches \-S given on the command line, no-op when resuming (default: false)
+.TP 8
+.B shadowuid=<int>
+unique identifier for the shadow session
+.TP 8
+.B shadowmode=<string>
+full access (set to \fI1\fR) or viewing-only (set to \fI0\fR, default)
+.TP 8
+.B defer=<int>
+defer image updates (enabled for all connection types except LAN), accepts values \fI0\fR, \fI1\fR and \fI2\fR
+
+The default value can be set via the cmd line (\-defer). The value
+provided as nx/nx option is set when resuming a session, thus it
+overrides the cmd line default.
+.TP 8
+.B tile=<string>
+set the tile size in pixels (\fI<W>x<H>\fR) for bitmap data sent over the wire
+
+The default value can be set via the cmd line (\-tile). The value
+provided as nx/nx option is set when resuming a session, thus it
+overrides the cmd line default.
+.TP 8
+.B menu=<int>
+support pulldown menu in nx-X11 Agent session (only available on proxy <-> agent remote sessions)
+.TP 8
+.B sleep=<int>
+delay X server operations when suspended (provided in msec), set to \fI0\fR to keep nx-X11 Agent session
+fully functional when suspended (e.g. useful when mirroring nx-X11 Agent session via VNC)
+
+.SH XDMCP OPTIONS
+X servers that support XDMCP have the following options.
+See the \fIX Display Manager Control Protocol\fP specification for more
+information.
+.TP 8
+.B \-query \fIhostname\fP
+enables XDMCP and sends Query packets to the specified
+.IR hostname .
+.TP 8
+.B \-broadcast
+enable XDMCP and broadcasts BroadcastQuery packets to the network. The
+first responding display manager will be chosen for the session.
+.TP 8
+.B \-multicast [\fIaddress\fP [\fIhop count\fP]]
+Enable XDMCP and multicast BroadcastQuery packets to the network.
+The first responding display manager is chosen for the session. If an
+address is specified, the multicast is sent to that address. If no
+address is specified, the multicast is sent to the default XDMCP IPv6
+multicast group. If a hop count is specified, it is used as the maximum
+hop count for the multicast. If no hop count is specified, the multicast
+is set to a maximum of 1 hop, to prevent the multicast from being routed
+beyond the local network.
+.TP 8
+.B \-indirect \fIhostname\fP
+enables XDMCP and send IndirectQuery packets to the specified
+.IR hostname .
+.TP 8
+.B \-port \fIport-number\fP
+uses the specified \fIport-number\fP for XDMCP packets, instead of the
+default. This option must be specified before any \-query, \-broadcast,
+\-multicast, or \-indirect options.
+.TP 8
+.B \-from \fIlocal-address\fP
+specifies the local address to connect from (useful if the connecting host
+has multiple network interfaces). The \fIlocal-address\fP may be expressed
+in any form acceptable to the host platform's \fIgethostbyname\fP(3)
+implementation.
+.TP 8
+.B \-once
+causes the server to terminate (rather than reset) when the XDMCP session
+ends.
+.TP 8
+.B \-class \fIdisplay-class\fP
+XDMCP has an additional display qualifier used in resource lookup for
+display-specific options. This option sets that value, by default it
+is "MIT-Unspecified" (not a very useful value).
+.TP 8
+.B \-cookie \fIxdm-auth-bits\fP
+When testing XDM-AUTHENTICATION-1, a private key is shared between the
+server and the manager. This option sets the value of that private
+data (not that it is very private, being on the command line!).
+.TP 8
+.B \-displayID \fIdisplay-id\fP
+Yet another XDMCP specific value, this one allows the display manager to
+identify each display so that it can locate the shared key.
+
+.SH XKEYBOARD OPTIONS
+X servers that support the XKEYBOARD (a.k.a. \*qXKB\*q) extension accept the
+following options. All layout files specified on the command line must be
+located in the XKB base directory or a subdirectory, and specified as the
+relative path from the XKB base directory. The default XKB base directory is
+.IR /usr/share/X11/xkb .
+.TP 8
+.B [+-]kb
+enables(+) or disables(-) the XKEYBOARD extension.
+.TP 8
+.BR [+-]accessx " [ \fItimeout\fP [ \fItimeout_mask\fP [ \fIfeedback\fP [ \fIoptions_mask\fP ] ] ] ]"
+enables(+) or disables(-) AccessX key sequences.
+.TP 8
+.B \-xkbdir \fIdirectory\fP
+base directory for keyboard layout files. This option is not available
+for setuid X servers (i.e., when the X server's real and effective uids
+are different).
+.TP 8
+.B \-ar1 \fImilliseconds\fP
+sets the autorepeat delay (length of time in milliseconds that a key must
+be depressed before autorepeat starts).
+.TP 8
+.B \-ar2 \fImilliseconds\fP
+sets the autorepeat interval (length of time in milliseconds that should
+elapse between autorepeat-generated keystrokes).
+.TP 8
+.B \-noloadxkb
+disables loading of an XKB keymap description on server startup.
+.TP 8
+.B \-xkbdb \fIfilename\fP
+uses \fIfilename\fP for default keyboard keymaps.
+.TP 8
+.B \-xkbmap \fIfilename\fP
+loads keyboard description in \fIfilename\fP on server startup.
+
+.SH SECURITY EXTENSION OPTIONS
+X servers that support the SECURITY extension accept the following option:
+.TP 8
+.B \-sp \fIfilename\fP
+causes the server to attempt to read and interpret filename as a security
+policy file with the format described below. The file is read at server
+startup and reread at each server reset.
+.PP
+The syntax of the security policy file is as follows.
+Notation: "*" means zero or more occurrences of the preceding element,
+and "+" means one or more occurrences. To interpret <foo/bar>, ignore
+the text after the /; it is used to distinguish between instances of
+<foo> in the next section.
+.PP
+.nf
+<policy file> ::= <version line> <other line>*
+
+<version line> ::= <string/v> '\en'
+
+<other line > ::= <comment> | <access rule> | <site policy> | <blank line>
+
+<comment> ::= # <not newline>* '\en'
+
+<blank line> ::= <space> '\en'
+
+<site policy> ::= sitepolicy <string/sp> '\en'
+
+<access rule> ::= property <property/ar> <window> <perms> '\en'
+
+<property> ::= <string>
+
+<window> ::= any | root | <required property>
+
+<required property> ::= <property/rp> | <property with value>
+
+<property with value> ::= <property/rpv> = <string/rv>
+
+<perms> ::= [ <operation> | <action> | <space> ]*
+
+<operation> ::= r | w | d
+
+<action> ::= a | i | e
+
+<string> ::= <dbl quoted string> | <single quoted string> | <unqouted string>
+
+<dbl quoted string> ::= <space> " <not dqoute>* " <space>
+
+<single quoted string> ::= <space> ' <not squote>* ' <space>
+
+<unquoted string> ::= <space> <not space>+ <space>
-.SH FURTHER READINGS
-Information on NX: http://www.nomachine.com
+<space> ::= [ ' ' | '\et' ]*
+
+Character sets:
+
+<not newline> ::= any character except '\en'
+<not dqoute> ::= any character except "
+<not squote> ::= any character except '
+<not space> ::= any character except those in <space>
+.fi
+.PP
+The semantics associated with the above syntax are as follows.
+.PP
+<version line>, the first line in the file, specifies the file format
+version. If the server does not recognize the version <string/v>, it
+ignores the rest of the file. The version string for the file format
+described here is "version-1" .
+.PP
+Once past the <version line>, lines that do not match the above syntax
+are ignored.
+.PP
+<comment> lines are ignored.
+.PP
+<sitepolicy> lines are currently ignored. They are intended to
+specify the site policies used by the XC-QUERY-SECURITY-1
+authorization method.
+.PP
+<access rule> lines specify how the server should react to untrusted
+client requests that affect the X Window property named <property/ar>.
+The rest of this section describes the interpretation of an
+<access rule>.
+.PP
+For an <access rule> to apply to a given instance of <property/ar>,
+<property/ar> must be on a window that is in the set of windows
+specified by <window>. If <window> is any, the rule applies to
+<property/ar> on any window. If <window> is root, the rule applies to
+<property/ar> only on root windows.
+.PP
+If <window> is <required property>, the following apply. If <required
+property> is a <property/rp>, the rule applies when the window also
+has that <property/rp>, regardless of its value. If <required
+property> is a <property with value>, <property/rpv> must also have
+the value specified by <string/rv>. In this case, the property must
+have type STRING and format 8, and should contain one or more
+null-terminated strings. If any of the strings match <string/rv>, the
+rule applies.
+.PP
+The definition of string matching is simple case-sensitive string
+comparison with one elaboration: the occurrence of the character '*' in
+<string/rv> is a wildcard meaning "any string." A <string/rv> can
+contain multiple wildcards anywhere in the string. For example, "x*"
+matches strings that begin with x, "*x" matches strings that end with
+x, "*x*" matches strings containing x, and "x*y*" matches strings that
+start with x and subsequently contain y.
+.PP
+There may be multiple <access rule> lines for a given <property/ar>.
+The rules are tested in the order that they appear in the file. The
+first rule that applies is used.
+.PP
+<perms> specify operations that untrusted clients may attempt, and
+the actions that the server should take in response to those operations.
+.PP
+<operation> can be r (read), w (write), or d (delete). The following
+table shows how X Protocol property requests map to these operations
+in The Open Group server implementation.
+.PP
+.nf
+GetProperty r, or r and d if delete = True
+ChangeProperty w
+RotateProperties r and w
+DeleteProperty d
+ListProperties none, untrusted clients can always list all properties
+.fi
+.PP
+<action> can be a (allow), i (ignore), or e (error). Allow means
+execute the request as if it had been issued by a trusted client.
+Ignore means treat the request as a no-op. In the case of
+GetProperty, ignore means return an empty property value if the
+property exists, regardless of its actual value. Error means do not
+execute the request and return a BadAtom error with the atom set to
+the property name. Error is the default action for all properties,
+including those not listed in the security policy file.
+.PP
+An <action> applies to all <operation>s that follow it, until the next
+<action> is encountered. Thus, irwad means ignore read and write,
+allow delete.
+.PP
+GetProperty and RotateProperties may do multiple operations (r and d,
+or r and w). If different actions apply to the operations, the most
+severe action is applied to the whole request; there is no partial
+request execution. The severity ordering is: allow < ignore < error.
+Thus, if the <perms> for a property are ired (ignore read, error
+delete), and an untrusted client attempts GetProperty on that property
+with delete = True, an error is returned, but the property value is
+not. Similarly, if any of the properties in a RotateProperties do not
+allow both read and write, an error is returned without changing any
+property values.
+.PP
+Here is an example security policy file.
+.PP
+.ta 3i 4i
+.nf
+version-1
+
+# Allow reading of application resources, but not writing.
+property RESOURCE_MANAGER root ar iw
+property SCREEN_RESOURCES root ar iw
+
+# Ignore attempts to use cut buffers. Giving errors causes apps to crash,
+# and allowing access may give away too much information.
+property CUT_BUFFER0 root irw
+property CUT_BUFFER1 root irw
+property CUT_BUFFER2 root irw
+property CUT_BUFFER3 root irw
+property CUT_BUFFER4 root irw
+property CUT_BUFFER5 root irw
+property CUT_BUFFER6 root irw
+property CUT_BUFFER7 root irw
+
+# If you are using Motif, you probably want these.
+property _MOTIF_DEFAULT_BINDINGS root ar iw
+property _MOTIF_DRAG_WINDOW root ar iw
+property _MOTIF_DRAG_TARGETS any ar iw
+property _MOTIF_DRAG_ATOMS any ar iw
+property _MOTIF_DRAG_ATOM_PAIRS any ar iw
+
+# The next two rules let xwininfo -tree work when untrusted.
+property WM_NAME any ar
+
+# Allow read of WM_CLASS, but only for windows with WM_NAME.
+# This might be more restrictive than necessary, but demonstrates
+# the <required property> facility, and is also an attempt to
+# say "top level windows only."
+property WM_CLASS WM_NAME ar
+
+# These next three let xlsclients work untrusted. Think carefully
+# before including these; giving away the client machine name and command
+# may be exposing too much.
+property WM_STATE WM_NAME ar
+property WM_CLIENT_MACHINE WM_NAME ar
+property WM_COMMAND WM_NAME ar
+
+# To let untrusted clients use the standard colormaps created by
+# xstdcmap, include these lines.
+property RGB_DEFAULT_MAP root ar
+property RGB_BEST_MAP root ar
+property RGB_RED_MAP root ar
+property RGB_GREEN_MAP root ar
+property RGB_BLUE_MAP root ar
+property RGB_GRAY_MAP root ar
+
+# To let untrusted clients use the color management database created
+# by xcmsdb, include these lines.
+property XDCCC_LINEAR_RGB_CORRECTION root ar
+property XDCCC_LINEAR_RGB_MATRICES root ar
+property XDCCC_GRAY_SCREENWHITEPOINT root ar
+property XDCCC_GRAY_CORRECTION root ar
+
+# To let untrusted clients use the overlay visuals that many vendors
+# support, include this line.
+property SERVER_OVERLAY_VISUALS root ar
+
+# Dumb examples to show other capabilities.
+
+# oddball property names and explicit specification of error conditions
+property "property with spaces" 'property with "' aw er ed
+
+# Allow deletion of Woo-Hoo if window also has property OhBoy with value
+# ending in "son". Reads and writes will cause an error.
+property Woo-Hoo OhBoy = "*son" ad
+
+.fi
+.SH "NETWORK CONNECTIONS"
+The X server supports client connections via a platform-dependent subset of
+the following transport types: TCP\/IP, Unix Domain sockets, DECnet,
+and several varieties of SVR4 local connections. See the DISPLAY
+NAMES section of the \fIX\fP(__miscmansuffix__) manual page to learn how to
+specify which transport type clients should try to use.
+
+.SH GRANTING ACCESS
+The X server implements a platform-dependent subset of the following
+authorization protocols: MIT-MAGIC-COOKIE-1, XDM-AUTHORIZATION-1,
+XDM-AUTHORIZATION-2, SUN-DES-1, and MIT-KERBEROS-5. See the
+\fIXsecurity\fP(__miscmansuffix__) manual page for information on the
+operation of these protocols.
+.PP
+Authorization data required by the above protocols is passed to the
+server in a private file named with the \fB\-auth\fP command line
+option. Each time the server is about to accept the first connection
+after a reset (or when the server is starting), it reads this file.
+If this file contains any authorization records, the local host is not
+automatically allowed access to the server, and only clients which
+send one of the authorization records contained in the file in the
+connection setup information will be allowed access. See the
+\fIXau\fP manual page for a description of the binary format of this
+file. See \fIxauth\fP(1) for maintenance of this file, and distribution
+of its contents to remote hosts.
+.PP
+The X server also uses a host-based access control list for deciding
+whether or not to accept connections from clients on a particular machine.
+If no other authorization mechanism is being used,
+this list initially consists of the host on which the server is running as
+well as any machines listed in the file \fI/etc/X\fBn\fI.hosts\fR, where
+\fBn\fP is the display number of the server. Each line of the file should
+contain either an Internet hostname (e.g. expo.lcs.mit.edu) or a DECnet
+hostname in double colon format (e.g. hydra::) or a complete name in the format
+\fIfamily\fP:\fIname\fP as described in the \fIxhost\fP(1) manual page.
+There should be no leading or trailing spaces on any lines. For example:
+.sp
+.in +8
+.nf
+joesworkstation
+corporate.company.com
+star::
+inet:bigcpu
+local:
+.fi
+.in -8
+.PP
+Users can add or remove hosts from this list and enable or disable access
+control using the \fIxhost\fP command from the same machine as the server.
+.PP
+If the X FireWall Proxy (\fIxfwp\fP) is being used without a sitepolicy,
+host-based authorization must be turned on for clients to be able to
+connect to the X server via the \fIxfwp\fP. If \fIxfwp\fP is run without
+a configuration file and thus no sitepolicy is defined, if \fIxfwp\fP
+is using an X server where xhost + has been run to turn off host-based
+authorization checks, when a client tries to connect to this X server
+via \fIxfwp\fP, the X server will deny the connection. See \fIxfwp\fP(1)
+for more information about this proxy.
+.PP
+The X protocol intrinsically does not have any notion of window operation
+permissions or place any restrictions on what a client can do; if a program can
+connect to a display, it has full run of the screen.
+X servers that support the SECURITY extension fare better because clients
+can be designated untrusted via the authorization they use to connect; see
+the \fIxauth\fP(1) manual page for details. Restrictions are imposed
+on untrusted clients that curtail the mischief they can do. See the SECURITY
+extension specification for a complete list of these restrictions.
+.PP
+Sites that have better
+authentication and authorization systems might wish to make
+use of the hooks in the libraries and the server to provide additional
+security models.
+.SH SIGNALS
+The X server attaches special meaning to the following signals:
+.TP 8
+.I SIGHUP
+This signal causes the server to close all existing connections, free all
+resources, and restore all defaults. It is sent by the display manager
+whenever the main user's main application (usually an \fIxterm\fP or window
+manager) exits to force the server to clean up and prepare for the next
+user.
+.TP 8
+.I SIGTERM
+This signal causes the server to exit cleanly.
+.TP 8
+.I SIGUSR1
+This signal is used quite differently from either of the above. When the
+server starts, it checks to see if it has inherited SIGUSR1 as SIG_IGN
+instead of the usual SIG_DFL. In this case, the server sends a SIGUSR1 to
+its parent process after it has set up the various connection schemes.
+\fIXdm\fP uses this feature to recognize when connecting to the server
+is possible.
+.SH FONTS
+The X server
+can obtain fonts from directories and/or from font servers.
+The list of directories and font servers
+the X server uses when trying to open a font is controlled
+by the \fIfont path\fP.
+.LP
+The default font path is
+__default_font_path__ .
+.LP
+The font path can be set with the \fB\-fp\fP option or by \fIxset\fP(1)
+after the server has started.
+.SH FILES
+.TP 30
+.I /etc/X\fBn\fP.hosts
+Initial access control list for display number \fBn\fP
+.TP 30
+.IR /usr/share/fonts/X11/misc,
+ /usr/share/fonts/X11/75dpi,
+ /usr/share/fonts/X11/100dpi
+Bitmap font directories
+.TP 30
+.IR /usr/share/fonts/X11/Type1
+Outline font directories
+.TP 30
+.I /usr/share/nx/rgb
+Color database
+.TP 30
+.I /tmp/.X11-unix/X\fBn\fP
+Unix domain socket for display number \fBn\fP
+.TP 30
+.IR /tmp/rcX\fBn\fP
+Kerberos 5 replay cache for display number \fBn\fP
+.SH "SEE ALSO"
+Protocols:
+.I "X Window System Protocol,"
+.I "NX Compression Protocol,"
+.I "The X Font Service Protocol,"
+.I "X Display Manager Control Protocol"
+.PP
+Fonts: \fIbdftopcf\fP(1), \fImkfontdir\fP(1), \fImkfontscale\fP(1),
+\fIxfs\fP(1), \fIxlsfonts\fP(1), \fIxfontsel\fP(1), \fIxfd\fP(1),
+.I "X Logical Font Description Conventions"
+.PP
+Security: \fIXsecurity\fP(__miscmansuffix__), \fIxauth\fP(1), \fIXau\fP(1),
+\fIxdm\fP(1), \fIxhost\fP(1), \fIxfwp\fP(1),
+.I "Security Extension Specification"
+.PP
+Starting the server: \fIxdm\fP(1), \fIxinit\fP(1)
+.PP
+Controlling the server once started: \fIxset\fP(1), \fIxsetroot\fP(1),
+\fIxhost\fP(1)
+.PP
+Server-specific man pages:
+\fIXdec\fP(1), \fIXmacII\fP(1), \fIXsun\fP(1), \fIXnest\fP(1),
+\fIXvfb\fP(1), \fIXFree86\fP(1), \fIXDarwin\fP(1).
+.PP
+Server internal documentation:
+.I "Definition of the Porting Layer for the X v11 Sample Server"
+.SH AUTHORS
+The first sample X server was originally written by Susan Angebranndt,
+Raymond Drewry, Philip Karlton, and Todd Newman, from Digital Equipment
+Corporation, with support from a large cast. It has since been
+extensively rewritten by Keith Packard and Bob Scheifler, from MIT. Dave
+Wiggins took over post-R5 and made substantial improvements.
+.PP
+The first implementation of nx-X11 (version 1.x up to 3.5.x) was written
+by NoMachine (maintained until 2011).
+.PP
+The current implementation of nx-X11 is maintained by various projects,
+amongst others The Arctica Project, TheQVD (Qindel Group) and X2Go.
.PP
-Information on FreeNX: http://freenx.berlios.de
+This manual page was written by Per Hansen <spamhans@yahoo.de>, and
+modified by Marcelo Boveto Shima <marceloshima@gmail.com> and Mike
+Gabriel <mike.gabriel@das-netzwerkteam.de>. In 2016, the original
+Xserver.man page shipped with nx-X11 was merged into the \fBnxagent\fR
+man page and received a major update by Mike Gabriel
+<mike.gabriel@das-netzwerkteam.de>.
-.SH AUTHOR
-This manual page was written by Per Hansen <spamhans@yahoo.de>,
-and modified by Marcelo Boveto Shima <marceloshima@gmail.com> and
-Mike Gabriel <mike.gabriel@das-netzwerkteam.de>.