aboutsummaryrefslogtreecommitdiff
path: root/nx-X11/programs/xterm/ctlseqs.ms
diff options
context:
space:
mode:
Diffstat (limited to 'nx-X11/programs/xterm/ctlseqs.ms')
-rw-r--r--nx-X11/programs/xterm/ctlseqs.ms1876
1 files changed, 0 insertions, 1876 deletions
diff --git a/nx-X11/programs/xterm/ctlseqs.ms b/nx-X11/programs/xterm/ctlseqs.ms
deleted file mode 100644
index bbf8960ee..000000000
--- a/nx-X11/programs/xterm/ctlseqs.ms
+++ /dev/null
@@ -1,1876 +0,0 @@
-.\"#! troff -ms $1 -*- Nroff -*-
-.\" "Xterm Control Sequences" document
-.\" $XTermId: ctlseqs.ms,v 1.158 2005/09/18 23:48:10 tom Exp $
-.\"
-.\"
-.\" $Xorg: ctlseqs.ms,v 1.3 2000/08/17 19:42:51 cpqbld Exp $
-.\"
-.\"
-.\"
-.\" $XFree86: xc/doc/specs/xterm/ctlseqs.ms,v 3.57 2005/09/18 23:48:10 dickey Exp $
-.\"
-.\"
-.\" Copyright 1996-2004,2005 by Thomas E. Dickey
-.\"
-.\" All Rights Reserved
-.\"
-.\" Permission is hereby granted, free of charge, to any person obtaining a
-.\" copy of this software and associated documentation files (the
-.\" "Software"), to deal in the Software without restriction, including
-.\" without limitation the rights to use, copy, modify, merge, publish,
-.\" distribute, sublicense, and/or sell copies of the Software, and to
-.\" permit persons to whom the Software is furnished to do so, subject to
-.\" the following conditions:
-.\"
-.\" The above copyright notice and this permission notice shall be included
-.\" in all copies or substantial portions of the Software.
-.\"
-.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-.\" OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-.\" IN NO EVENT SHALL THE ABOVE LISTED COPYRIGHT HOLDER(S) BE LIABLE FOR ANY
-.\" CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
-.\" TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
-.\" SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-.\"
-.\" Except as contained in this notice, the name(s) of the above copyright
-.\" holders shall not be used in advertising or otherwise to promote the
-.\" sale, use or other dealings in this Software without prior written
-.\" authorization.
-.\"
-.\"
-.\" Copyright 1991, 1994 X Consortium
-.\"
-.\" Permission is hereby granted, free of charge, to any person obtaining
-.\" a copy of this software and associated documentation files (the
-.\" "Software"), to deal in the Software without restriction, including
-.\" without limitation the rights to use, copy, modify, merge, publish,
-.\" distribute, sublicense, and/or sell copies of the Software, and to
-.\" permit persons to whom the Software is furnished to do so, subject to
-.\" the following conditions:
-.\"
-.\" The above copyright notice and this permission notice shall be
-.\" included in all copies or substantial portions of the Software.
-.\"
-.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-.\" EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-.\" IN NO EVENT SHALL THE X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR
-.\" OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-.\" ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-.\" OTHER DEALINGS IN THE SOFTWARE.
-.\"
-.\" Except as contained in this notice, the name of the X Consortium shall
-.\" not be used in advertising or otherwise to promote the sale, use or
-.\" other dealings in this Software without prior written authorization
-.\" from the X Consortium.
-.\"
-.\" X Window System is a trademark of X Consortium, Inc.
-.\"
-.\" Originally written by Edward Moy, University of California,
-.\" Berkeley, edmoy@violet.berkeley.edu, for the X.V10R4 xterm.
-.\" The X Consortium staff has since updated it for X11.
-.\" Updated by Thomas E. Dickey for XFree86 3.2 - XFree86 4.3
-.\"
-.\" Run this file through troff and use the -ms macro package.
-.\"
-.if n .pl 9999v \" no page breaks in nroff
-.ND
-.de St
-.sp
-.nr PD 0
-.nr PI 1.5i
-.nr VS 16
-..
-.de Ed
-.nr PD .3v
-.nr VS 12
-..
-.ds CH \" as nothing
-.ds LH Xterm Control Sequences
-.nr s 6*\n(PS/10
-.ds L \s\nsBEL\s0
-.ds E \s\nsESC\s0
-.ds T \s\nsTAB\s0
-.ds X \s\nsETX\s0
-.ds N \s\nsENQ\s0
-.ds e \s\nsETB\s0
-.ds C \s\nsCAN\s0
-.ds S \s\nsSUB\s0
-.\" space between chars
-.ie t .ds s \|
-.el .ds s " \"
-.nr [W \w'\*L'u
-.nr w \w'\*E'u
-.if \nw>\n([W .nr [W \nw
-.nr w \w'\*T'u
-.if \nw>\n([W .nr [W \nw
-.nr w \w'\*X'u
-.if \nw>\n([W .nr [W \nw
-.nr w \w'\*N'u
-.if \nw>\n([W .nr [W \nw
-.nr w \w'\*e'u
-.if \nw>\n([W .nr [W \nw
-.nr w \w'\*C'u
-.if \nw>\n([W .nr [W \nw
-.nr w \w'\*S'u
-.if \nw>\n([W .nr [W \nw
-.nr [W +\w'\|\|'u
-.de []
-.nr w \w'\\$2'
-.nr H \\n([Wu-\\nwu
-.nr h \\nHu/2u
-.\" do fancy box in troff
-.ie t .ds \\$1 \(br\v'-1p'\(br\v'1p'\h'\\nhu'\\$2\h'\\nHu-\\nhu'\(br\l'-\\n([Wu\(ul'\v'-1p'\(br\l'-\\n([Wu\(rn'\v'1p'\*s
-.el .ds \\$1 \\$2\*s
-..
-.[] Et \v'-1p'\*X\v'1p'
-.[] En \v'-1p'\*N\v'1p'
-.[] Be \v'-1p'\*L\v'1p'
-.[] AP \v'-1p'\s\nsAPC\s0\v'1p'
-.[] Bs \v'-1p'\s\nsBS\s0\v'1p'
-.[] Cs \v'-1p'\s\nsCSI\s0\v'1p'
-.[] S2 \v'-1p'\s\nsSS2\s0\v'1p'
-.[] S3 \v'-1p'\s\nsSS3\s0\v'1p'
-.[] SS \v'-1p'\s\nsSOS\s0\v'1p'
-.[] Eg \v'-1p'\s\nsEPA\s0\v'1p'
-.[] Sg \v'-1p'\s\nsSPA\s0\v'1p'
-.[] Dc \v'-1p'\s\nsDCS\s0\v'1p'
-.[] Ht \v'-1p'\s\nsHTS\s0\v'1p'
-.[] ID \v'-1p'\s\nsIND\s0\v'1p'
-.[] Nl \v'-1p'\s\nsNEL\s0\v'1p'
-.[] Os \v'-1p'\s\nsOSC\s0\v'1p'
-.[] RI \v'-1p'\s\nsRI\s0\v'1p'
-.[] PM \v'-1p'\s\nsPM\s0\v'1p'
-.[] ST \v'-1p'\s\nsST\s0\v'1p'
-.[] Ta \v'-1p'\*T\v'1p'
-.[] Lf \v'-1p'\s\nsLF\s0\v'1p'
-.[] Vt \v'-1p'\s\nsVT\s0\v'1p'
-.[] Ff \v'-1p'\s\nsFF\s0\v'1p'
-.[] Cr \v'-1p'\s\nsCR\s0\v'1p'
-.[] So \v'-1p'\s\nsSO\s0\v'1p'
-.[] Sp \v'-1p'\s\nsSP\s0\v'1p'
-.[] Si \v'-1p'\s\nsSI\s0\v'1p'
-.[] Eb \v'-1p'\*e\v'1p'
-.[] Ca \v'-1p'\*C\v'1p'
-.[] Su \v'-1p'\*S\v'1p'
-.[] Es \v'-1p'\*E\v'1p'
-.[] Fs \v'-1p'\s\nsFS\s0\v'1p'
-.[] Gs \v'-1p'\s\nsGS\s0\v'1p'
-.[] Rs \v'-1p'\s\nsRS\s0\v'1p'
-.[] Us \v'-1p'\s\nsUS\s0\v'1p'
-.[] XX \v'-1p'\s\nsXX\s0\v'1p'
-.[] $ $
-.[] # #
-.[] % %
-.[] (( (
-.[] ) )
-.[] * *
-.[] + +
-.[] , ,
-.[] - -
-.[] . .
-.[] 0 0
-.[] 1 1
-.[] 2 2
-.[] 3 3
-.[] 4 4
-.[] 5 5
-.[] 6 6
-.[] 7 7
-.[] 8 8
-.[] 9 9
-.[] : :
-.[] ; ;
-.[] = =
-.[] / /
-.[] < <
-.[] > >
-.[] ? ?
-.[] @ @
-.[] A A
-.[] cB B
-.[] C C
-.[] D D
-.[] E E
-.[] F F
-.[] G G
-.[] H H
-.[] I I
-.[] J J
-.[] K K
-.[] L L
-.[] M M
-.[] N N
-.[] O O
-.[] P P
-.[] Q Q
-.[] R R
-.[] S S
-.[] T T
-.[] V V
-.[] W W
-.[] XX X
-.[] Y Y
-.[] Z Z
-.[] [[ [
-.[] ]] ]
-.[] bS \\e
-.[] { {
-.[] ] ]
-.[] & &
-.[] ^ ^
-.[] _ _
-.[] qu \&'
-.[] ` \`
-.[] a a
-.[] b b
-.[] c c
-.[] d d
-.[] f f
-.[] g g
-.[] h h
-.[] i i
-.[] j j
-.[] k k
-.[] l l
-.[] m m
-.[] n n
-.[] o o
-.[] p p
-.[] q q
-.[] r r
-.[] cs s
-.[] t t
-.[] u u
-.[] v v
-.[] w w
-.[] x x
-.[] y y
-.[] z z
-.[] | |
-.[] } }
-.[] ! !
-.[] c" \(lq
-.[] c~ ~
-.[] Sc \fIc\fP
-.ds Cc \fIC\fP
-.ds Cb \fIC\v'.3m'\h'-.2m'\s-2b\s0\v'-.3m'\fP
-.ds Cx \fIC\v'.3m'\h'-.2m'\s-2x\s0\v'-.3m'\fP
-.ds Cy \fIC\v'.3m'\h'-.2m'\s-2y\s0\v'-.3m'\fP
-.ds Pb \fIP\v'.3m'\h'-.2m'\s-2b\s0\v'-.3m'\fP
-.ds Pc \fIP\v'.3m'\h'-.2m'\s-2c\s0\v'-.3m'\fP
-.ds Pd \fIP\v'.3m'\h'-.2m'\s-2d\s0\v'-.3m'\fP
-.ds Pe \fIP\v'.3m'\h'-.2m'\s-2e\s0\v'-.3m'\fP
-.ds Pl \fIP\v'.3m'\h'-.2m'\s-2l\s0\v'-.3m'\fP
-.ds Pm \fIP\v'.3m'\h'-.2m'\s-2m\s0\v'-.3m'\fP
-.ds Pp \fIP\v'.3m'\h'-.2m'\s-2p\s0\v'-.3m'\fP
-.ds Pr \fIP\v'.3m'\h'-.2m'\s-2r\s0\v'-.3m'\fP
-.ds Ps \fIP\v'.3m'\h'-.2m'\s-2s\s0\v'-.3m'\fP
-.ds Pt \fIP\v'.3m'\h'-.2m'\s-2t\s0\v'-.3m'\fP
-.ds Pu \fIP\v'.3m'\h'-.2m'\s-2u\s0\v'-.3m'\fP
-.ds Pv \fIP\v'.3m'\h'-.2m'\s-2v\s0\v'-.3m'\fP
-.ds Ix \fIx\fP
-.ds Iy \fIy\fP
-.ds Iw \fIw\fP
-.ds Ih \fIh\fP
-.ds Ir \fIr\fP
-.ds Ic \fIc\fP
-.ie t .nr LL 6.5i
-.el .nr LL 72m
-.if n .na
-.TL
-Xterm Control Sequences
-.AU
-Edward Moy
-.AI
-University of California, Berkeley
-.sp
-Revised by
-.AU
-Stephen Gildea
-.AI
-X Consortium (1994)
-.AU
-Thomas Dickey
-.AI
-XFree86 Project (1996-2005)
-.AU
-.
-.am BT \" add page numbers after first page
-.ds CF %
-..
-.SH
-Definitions
-.IP \*(Sc
-The literal character \fIc\fP.
-.IP \*(Cc
-A single (required) character.
-.IP \*(Ps
-A single (usually optional) numeric parameter, composed of one of more digits.
-.IP \*(Pm
-A multiple numeric parameter composed of any number of single numeric
-parameters, separated by \*; character(s).
-Individual values for the parameters are listed with \*(Ps .
-.IP \*(Pt
-A text parameter composed of printable characters.
-.
-.SH
-C1 (8-Bit) Control Characters
-.ds RH C1 (8-Bit) Control Characters
-.LP
-The \fIxterm\fP program recognizes both 8-bit and 7-bit control characters.
-It generates 7-bit controls (by default) or 8-bit if S8C1T is enabled.
-The following pairs of 7-bit and 8-bit control characters are equivalent:
-.St
-.IP \\*(Es\\*D
-Index (\*(ID is 0x84)
-.IP \\*(Es\\*E
-Next Line (\*(Nl is 0x85)
-.IP \\*(Es\\*H
-Tab Set (\*(Ht is 0x88)
-.IP \\*(Es\\*M
-Reverse Index (\*(RI is 0x8d)
-.IP \\*(Es\\*N
-Single Shift Select of G2 Character Set (\*(S2 is 0x8e): affects next character only
-.IP \\*(Es\\*O
-Single Shift Select of G3 Character Set (\*(S3 is 0x8f): affects next character only
-.IP \\*(Es\\*P
-Device Control String (\*(Dc is 0x90)
-.IP \\*(Es\\*V
-Start of Guarded Area (\*(Sg is 0x96)
-.IP \\*(Es\\*W
-End of Guarded Area (\*(Eg is 0x97)
-.IP \\*(Es\\*(XX
-Start of String (\*(SS is 0x98)
-.IP \\*(Es\\*Z
-Return Terminal ID (DECID is 0x9a). Obsolete form of \*(Cs\*c (DA).
-.IP \\*(Es\\*([[
-Control Sequence Introducer (\*(Cs is 0x9b)
-.IP \\*(Es\\*(bS
-String Terminator (\*(ST is 0x9c)
-.IP \\*(Es\\*(]]
-Operating System Command (\*(Os is 0x9d)
-.IP \\*(Es\\*^
-Privacy Message (\*(PM is 0x9e)
-.IP \\*(Es\\*_
-Application Program Command (\*(AP is 0x9f)
-.Ed
-.sp
-.LP
-These control characters are used in the vtXXX emulation.
-.
-.SH
-VT100 Mode
-.ds RH VT100 Mode
-.LP
-Most of these control sequences are standard VT102 control sequences,
-but there is support for later DEC VT terminals (i.e., VT220, VT320, VT420),
-as well as ISO 6429 and \fIaixterm\fP color controls.
-The only VT102 features not supported is auto-repeat,
-since the only way X provides for this will affect all windows.
-There are additional control sequences to provide
-\fIxterm-\fPdependent functions, such as the scrollbar or window size.
-Where the function is specified by DEC or ISO 6429, the code assigned
-to it is given in parentheses. The escape codes to designate and invoke
-character sets are specified by ISO 2022; see that document for a
-discussion of character sets.
-.
-.St
-.\"
-.LP
-.B
-Single-character functions
-.\"
-.IP \\*(Be
-Bell (Ctrl-G)
-.
-.IP \\*(Bs
-Backspace (Ctrl-H)
-.
-.IP \\*(Cr
-Carriage Return (Ctrl-M)
-.
-.IP \\*(En
-Return Terminal Status (Ctrl-E).
-Default response is an empty string, but may be overridden
-by a resource \fBanswerbackString\fP.
-.
-.IP \\*(Ff
-Form Feed or New Page (NP) (Ctrl-L) same as LF
-.
-.IP \\*(Lf
-Line Feed or New Line (NL) (Ctrl-J)
-.
-.IP \\*(So
-Shift Out (Ctrl-N) \(-> Switch to Alternate Character Set: invokes the
-G1 character set.
-.
-.IP \\*(Sp
-Space.
-.
-.IP \\*(Ta
-Horizontal Tab (HT) (Ctrl-I)
-.
-.IP \\*(Vt
-Vertical Tab (Ctrl-K) same as LF
-.
-.IP \\*(Si
-Shift In (Ctrl-O) \(-> Switch to Standard Character Set: invokes the
-G0 character set (the default).
-.Ed
-.\"
-.\"
-.\"
-.St
-.LP
-.B
-Controls beginning with ESC (other than those where ESC is part of a 7-bit equivalent to 8-bit C1 controls), ordered by the final character(s).
-.\"
-.IP \\*(Es\\*(Sp\\*F
-7-bit controls (S7C1T).
-.
-.IP \\*(Es\\*(Sp\\*G
-8-bit controls (S8C1T).
-.
-.IP \\*(Es\\*(Sp\\*L
-Set ANSI conformance level 1 (dpANS X3.134.1).
-.
-.IP \\*(Es\\*(Sp\\*M
-Set ANSI conformance level 2 (dpANS X3.134.1).
-.
-.IP \\*(Es\\*(Sp\\*N
-Set ANSI conformance level 3 (dpANS X3.134.1).
-.
-.IP \\*(Es\\*#\\*3
-DEC double-height line, top half (DECDHL)
-.
-.IP \\*(Es\\*#\\*4
-DEC double-height line, bottom half (DECDHL)
-.
-.IP \\*(Es\\*#\\*5
-DEC single-width line (DECSWL)
-.
-.IP \\*(Es\\*#\\*6
-DEC double-width line (DECDWL)
-.
-.IP \\*(Es\\*#\\*8
-DEC Screen Alignment Test (DECALN)
-.
-.IP \\*(Es\\*%\\*@
-Select default character set, ISO 8859-1 (ISO 2022)
-.
-.IP \\*(Es\\*%\\*G
-Select UTF-8 character set (ISO 2022)
-.
-.IP \\*(Es\\*(((\\*(Cc
-Designate G0 Character Set (ISO 2022)
-.IP \\*(Es\\*)\\*(Cc
-Designate G1 Character Set (ISO 2022)
-.
-.IP \\*(Es\\**\\*(Cc
-Designate G2 Character Set (ISO 2022)
-.
-.IP \\*(Es\\*+\\*(Cc
-Designate G3 Character Set (ISO 2022)
-.br
-Final character \*(Cc for designating character sets
-(\*0, \*A and \*(cB apply to VT100 and up, the remainder to VT220 and up):
- \*(Cc = \*0 \(-> DEC Special Character and Line Drawing Set
- \*(Cc = \*A \(-> United Kingdom (UK)
- \*(Cc = \*(cB \(-> United States (USASCII)
- \*(Cc = \*4 \(-> Dutch
- \*(Cc = \*C or \*5 \(-> Finnish
- \*(Cc = \*R \(-> French
- \*(Cc = \*Q \(-> French Canadian
- \*(Cc = \*K \(-> German
- \*(Cc = \*Y \(-> Italian
- \*(Cc = \*E or \*6 \(-> Norwegian/Danish
- \*(Cc = \*Z \(-> Spanish
- \*(Cc = \*H or \*7 \(-> Swedish
- \*(Cc = \*= \(-> Swiss
-.
-.IP \\*(Es\\*7
-Save Cursor (DECSC)
-.
-.IP \\*(Es\\*8
-Restore Cursor (DECRC)
-.
-.IP \\*(Es\\*=
-Application Keypad (DECPAM)
-.
-.IP \\*(Es\\*>
-Normal Keypad (DECPNM)
-.
-.IP \\*(Es\\*F
-Cursor to lower left corner of screen (if
-enabled by the \fBhpLowerleftBugCompat\fP resource).
-.
-.IP \\*(Es\\*c
-Full Reset (RIS)
-.
-.IP \\*(Es\\*l
-Memory Lock (per HP terminals). Locks memory above the cursor.
-.
-.IP \\*(Es\\*m
-Memory Unlock (per HP terminals)
-.
-.IP \\*(Es\\*n
-Invoke the G2 Character Set as GL (LS2).
-.
-.IP \\*(Es\\*o
-Invoke the G3 Character Set as GL (LS3).
-.
-.IP \\*(Es\\*|
-Invoke the G3 Character Set as GR (LS3R).
-.
-.IP \\*(Es\\*}
-Invoke the G2 Character Set as GR (LS2R).
-.
-.IP \\*(Es\\*(c~
-Invoke the G1 Character Set as GR (LS1R).
-.Ed
-.
-.St
-.LP
-.B
-Application Program-Control functions
-.IP \\*(AP\\*(Pt\\*s\\*(ST
-\fIxterm\fP implements no \*(AP functions; \*(Pt is ignored.
-\*(Pt need not be printable characters.
-.Ed
-.
-.St
-.LP
-.B
-Device-Control functions
-.IP \\*(Dc\\*(Ps\\*;\\*(Ps\\*|\\*(Pt\\*s\\*(ST
-User-Defined Keys (DECUDK).
-The first parameter:
- \*(Ps = \*0 \(-> Clear all UDK definitions before starting (default)
- \*(Ps = \*1 \(-> Erase Below (default)
-.br
-The second parameter:
- \*(Ps = \*0 \(-> Lock the keys (default)
- \*(Ps = \*1 \(-> Do not lock.
-.br
-The third parameter is a ';'-separated list of strings denoting
-the key-code separated by a '/' from the hex-encoded key value.
-The key codes correspond to the DEC function-key codes (e.g., F6=17).
-.
-.IP \\*(Dc\\*$\\*q\\*(Pt\\*s\\*(ST
-Request Status String (DECRQSS).
-The string following the "q" is one of the following:
- \*(c"\*q \(-> DECSCA
- \*(c"\*p \(-> DECSCL
- \*r \(-> DECSTBM
- \*m \(-> SGR
-.br
-\fIxterm\fP responds with
-\*(Dc\*1\*$\*r\*(Pt\*s\*(ST
-for valid requests, replacing the \*(Pt with the corresponding \*(Cs
-string,
-or
-\*(Dc\*0\*$\*r\*(Pt\*s\*(ST
-for invalid requests.
-.
-.IP \\*(Dc\\*+\\*q\\*(Pt\\*s\\*(ST
-Request Termcap/Terminfo String (xterm, experimental).
-The string following the "q" is a list of names
-encoded in hexadecimal (2 digits per character)
-separated by \*;
-which correspond to termcap or terminfo key names.
-.br
-\fIxterm\fP responds with
-\*(Dc\*1\*+\*r\*(Pt\*s\*(ST
-for valid requests, adding to \*(Pt an \*=,
-and the value of the corresponding string that xterm would send,
-or
-\*(Dc\*0\*+\*r\*(Pt\*s\*(ST
-for invalid requests.
-The strings are encoded in hexadecimal (2 digits per character).
-.Ed
-.\"
-.St
-.LP
-.B
-Functions using \*(Cs, ordered by the final character(s)
-.IP \\*(Cs\\*(Ps\\*s\\*@
-Insert \*(Ps (Blank) Character(s) (default = 1) (ICH)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*A
-Cursor Up \*(Ps Times (default = 1) (CUU)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*(cB
-Cursor Down \*(Ps Times (default = 1) (CUD)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*C
-Cursor Forward \*(Ps Times (default = 1) (CUF)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*D
-Cursor Backward \*(Ps Times (default = 1) (CUB)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*E
-Cursor Next Line \*(Ps Times (default = 1) (CNL)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*F
-Cursor Preceding Line \*(Ps Times (default = 1) (CPL)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*G
-Cursor Character Absolute [column] (default = [row,1]) (CHA)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*;\\*(Ps\\*s\\*H
-Cursor Position [row;column] (default = [1,1]) (CUP)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*I
-Cursor Forward Tabulation \*(Ps tab stops (default = 1) (CHT)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*J
-Erase in Display (ED)
- \*(Ps = \*0 \(-> Erase Below (default)
- \*(Ps = \*1 \(-> Erase Above
- \*(Ps = \*2 \(-> Erase All
- \*(Ps = \*3 \(-> Erase Saved Lines (xterm)
-.
-.IP \\*(Cs\\*?\\*(Ps\\*s\\*J
-Erase in Display (DECSED)
- \*(Ps = \*0 \(-> Selective Erase Below (default)
- \*(Ps = \*1 \(-> Selective Erase Above
- \*(Ps = \*2 \(-> Selective Erase All
-.
-.IP \\*(Cs\\*(Ps\\*s\\*K
-Erase in Line (EL)
- \*(Ps = \*0 \(-> Erase to Right (default)
- \*(Ps = \*1 \(-> Erase to Left
- \*(Ps = \*2 \(-> Erase All
-.
-.IP \\*(Cs\\*?\\*(Ps\\*s\\*K
-Erase in Line (DECSEL)
- \*(Ps = \*0 \(-> Selective Erase to Right (default)
- \*(Ps = \*1 \(-> Selective Erase to Left
- \*(Ps = \*2 \(-> Selective Erase All
-.
-.IP \\*(Cs\\*(Ps\\*s\\*L
-Insert \*(Ps Line(s) (default = 1) (IL)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*M
-Delete \*(Ps Line(s) (default = 1) (DL)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*P
-Delete \*(Ps Character(s) (default = 1) (DCH)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*S
-Scroll up \*(Ps lines (default = 1) (SU)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*T
-Scroll down \*(Ps lines (default = 1) (SD)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*;\\*(Ps\\*s\\*;\\*(Ps\\*s\\*;\\*(Ps\\*s\\*;\\*(Ps\\*s\\*T
-Initiate highlight mouse tracking.
-Parameters are [func;startx;starty;firstrow;lastrow].
-See the section \fBMouse Tracking\fP.
-.
-.IP \\*(Cs\\*(Ps\\*s\\*(XX
-Erase \*(Ps Character(s) (default = 1) (ECH)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*Z
-Cursor Backward Tabulation \*(Ps tab stops (default = 1) (CBT)
-.
-.IP \\*(Cs\\*(Pm\\*s\\*`
-Character Position Absolute [column] (default = [row,1]) (HPA)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*b
-Repeat the preceding graphic character \*(Ps times (REP)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*c
-Send Device Attributes (Primary DA)
- \*(Ps = \*0 or omitted \(-> request attributes from terminal.
-The response depends on the \fBdecTerminalID\fP resource setting.
- \(-> \*(Cs\*?\*1\*;\*2\*c (``VT100 with Advanced Video Option'')
- \(-> \*(Cs\*?\*1\*;\*0\*c (``VT101 with No Options'')
- \(-> \*(Cs\*?\*6\*c (``VT102'')
- \(-> \*(Cs\*?\*6\*0\*;\*1\*;\*2\*;\*6\*;\*8\*;\*9\*;\*1\*5\*;\*c (``VT220'')
-.br
-The VT100-style response parameters do not mean anything by themselves.
-VT220 parameters do, telling the host what features the terminal supports:
- \(-> \*1 132-columns
- \(-> \*2 Printer
- \(-> \*6 Selective erase
- \(-> \*8 User-defined keys
- \(-> \*9 National replacement character sets
- \(-> \*1\*5 Technical characters
- \(-> \*2\*2 ANSI color, e.g., VT525
- \(-> \*2\*9 ANSI text locator (i.e., DEC Locator mode)
-.
-.IP \\*(Cs\\*>\\*(Ps\\*s\\*c
-Send Device Attributes (Secondary DA)
- \*(Ps = \*0 or omitted \(-> request the terminal's identification code.
-The response depends on the \fBdecTerminalID\fP resource setting.
-It should apply only to VT220 and up, but \fIxterm\fP extends this to VT100.
- \(-> \*(Cs\*s\*>\*(Pp\*s\*;\*(Pv\*s\*;\*(Pc\*s\*c
-.br
-where \*(Pp denotes the terminal type
- \(-> \*0 (``VT100'')
- \(-> \*1 (``VT220'')
-.br
-and \*(Pv is the firmware version (for \fIxterm\fP, this is the XFree86
-patch number, starting with 95).
-In a DEC terminal, \*(Pc indicates the ROM cartridge
-registration number and is always zero.
-.
-.IP \\*(Cs\\*(Pm\\*s\\*d
-Line Position Absolute [row] (default = [1,column]) (VPA)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*;\\*(Ps\\*s\\*f
-Horizontal and Vertical Position [row;column] (default = [1,1]) (HVP)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*g
-Tab Clear (TBC)
- \*(Ps = \*0 \(-> Clear Current Column (default)
- \*(Ps = \*3 \(-> Clear All
-.
-.IP \\*(Cs\\*(Pm\\*s\\*h
-Set Mode (SM)
- \*(Ps = \*2 \(-> Keyboard Action Mode (AM)
- \*(Ps = \*4 \(-> Insert Mode (IRM)
- \*(Ps = \*1\*2 \(-> Send/receive (SRM)
- \*(Ps = \*2\*0 \(-> Automatic Newline (LNM)
-.
-.IP \\*(Cs\\*?\\*(Pm\\*s\\*h
-DEC Private Mode Set (DECSET)
- \*(Ps = \*1 \(-> Application Cursor Keys (DECCKM)
- \*(Ps = \*2 \(-> Designate USASCII for character sets G0-G3 (DECANM),
-and set VT100 mode.
- \*(Ps = \*3 \(-> 132 Column Mode (DECCOLM)
- \*(Ps = \*4 \(-> Smooth (Slow) Scroll (DECSCLM)
- \*(Ps = \*5 \(-> Reverse Video (DECSCNM)
- \*(Ps = \*6 \(-> Origin Mode (DECOM)
- \*(Ps = \*7 \(-> Wraparound Mode (DECAWM)
- \*(Ps = \*8 \(-> Auto-repeat Keys (DECARM)
- \*(Ps = \*9 \(-> Send Mouse X & Y on button press.
-See the section \fBMouse Tracking\fP.
- \*(Ps = \*1\*0 \(-> Show toolbar (rxvt)
- \*(Ps = \*1\*2 \(-> Start Blinking Cursor (att610)
- \*(Ps = \*1\*8 \(-> Print form feed (DECPFF)
- \*(Ps = \*1\*9 \(-> Set print extent to full screen (DECPEX)
- \*(Ps = \*2\*5 \(-> Show Cursor (DECTCEM)
- \*(Ps = \*3\*0 \(-> Show scrollbar (rxvt).
- \*(Ps = \*3\*5 \(-> Enable font-shifting functions (rxvt).
- \*(Ps = \*3\*8 \(-> Enter Tektronix Mode (DECTEK)
- \*(Ps = \*4\*0 \(-> Allow 80 \z\(<-\(-> 132 Mode
- \*(Ps = \*4\*1 \(-> \fImore\fP(1) fix (see \fBcurses\fP resource)
- \*(Ps = \*4\*2 \(-> Enable Nation Replacement Character sets (DECNRCM)
- \*(Ps = \*4\*4 \(-> Turn On Margin Bell
- \*(Ps = \*4\*5 \(-> Reverse-wraparound Mode
- \*(Ps = \*4\*6 \(-> Start Logging
-(normally disabled by a compile-time option)
- \*(Ps = \*4\*7 \(-> Use Alternate Screen Buffer (unless
-disabled by the \fBtiteInhibit\fP resource)
- \*(Ps = \*6\*6 \(-> Application keypad (DECNKM)
- \*(Ps = \*6\*7 \(-> Backarrow key sends backspace (DECBKM)
- \*(Ps = \*1\*0\*0\*0 \(-> Send Mouse X & Y on button press and release.
-See the section \fBMouse Tracking\fP.
- \*(Ps = \*1\*0\*0\*1 \(-> Use Hilite Mouse Tracking.
- \*(Ps = \*1\*0\*0\*2 \(-> Use Cell Motion Mouse Tracking.
- \*(Ps = \*1\*0\*0\*3 \(-> Use All Motion Mouse Tracking.
- \*(Ps = \*1\*0\*1\*0 \(-> Scroll to bottom on tty output (rxvt).
- \*(Ps = \*1\*0\*1\*1 \(-> Scroll to bottom on key press (rxvt).
- \*(Ps = \*1\*0\*3\*5 \(-> Enable special modifiers for Alt and NumLock keys.
- \*(Ps = \*1\*0\*3\*6 \(-> Send ESC when Meta modifies a key
-(enables the \fBmetaSendsEscape\fP resource).
- \*(Ps = \*1\*0\*3\*7 \(-> Send DEL from the editing-keypad Delete key
- \*(Ps = \*1\*0\*4\*7 \(-> Use Alternate Screen Buffer (unless
-disabled by the \fBtiteInhibit\fP resource)
- \*(Ps = \*1\*0\*4\*8 \(-> Save cursor as in DECSC (unless
-disabled by the \fBtiteInhibit\fP resource)
- \*(Ps = \*1\*0\*4\*9 \(-> Save cursor as in DECSC
-and use Alternate Screen Buffer, clearing it first (unless
-disabled by the \fBtiteInhibit\fP resource).
-This combines the effects of the \*1\*0\*4\*7 and \*1\*0\*4\*8 modes.
-Use this with terminfo-based applications rather than the \*4\*7 mode.
- \*(Ps = \*1\*0\*5\*1 \(-> Set Sun function-key mode.
- \*(Ps = \*1\*0\*5\*2 \(-> Set HP function-key mode.
- \*(Ps = \*1\*0\*5\*3 \(-> Set SCO function-key mode.
- \*(Ps = \*1\*0\*6\*0 \(-> Set legacy keyboard emulation (X11R6).
- \*(Ps = \*1\*0\*6\*1 \(-> Set Sun/PC keyboard emulation of VT220 keyboard.
- \*(Ps = \*2\*0\*0\*4 \(-> Set bracketed paste mode.
-.
-.IP \\*(Cs\\*(Pm\\*s\\*i
-Media Copy (MC)
- \*(Ps = \*0 \(-> Print screen (default)
- \*(Ps = \*4 \(-> Turn off printer controller mode
- \*(Ps = \*5 \(-> Turn on printer controller mode
-.
-.IP \\*(Cs\\*?\\*(Pm\\*s\\*i
-Media Copy (MC, DEC-specific)
- \*(Ps = \*1 \(-> Print line containing cursor
- \*(Ps = \*4 \(-> Turn off autoprint mode
- \*(Ps = \*5 \(-> Turn on autoprint mode
- \*(Ps = \*1 \*0 \(-> Print composed display, ignores DECPEX
- \*(Ps = \*1 \*1 \(-> Print all pages
-.
-.IP \\*(Cs\\*(Pm\\*s\\*l
-Reset Mode (RM)
- \*(Ps = \*2 \(-> Keyboard Action Mode (AM)
- \*(Ps = \*4 \(-> Replace Mode (IRM)
- \*(Ps = \*1\*2 \(-> Send/receive (SRM)
- \*(Ps = \*2\*0 \(-> Normal Linefeed (LNM)
-.
-.IP \\*(Cs\\*?\\*(Pm\\*s\\*l
-DEC Private Mode Reset (DECRST)
- \*(Ps = \*1 \(-> Normal Cursor Keys (DECCKM)
- \*(Ps = \*2 \(-> Designate VT52 mode (DECANM).
- \*(Ps = \*3 \(-> 80 Column Mode (DECCOLM)
- \*(Ps = \*4 \(-> Jump (Fast) Scroll (DECSCLM)
- \*(Ps = \*5 \(-> Normal Video (DECSCNM)
- \*(Ps = \*6 \(-> Normal Cursor Mode (DECOM)
- \*(Ps = \*7 \(-> No Wraparound Mode (DECAWM)
- \*(Ps = \*8 \(-> No Auto-repeat Keys (DECARM)
- \*(Ps = \*9 \(-> Don't Send Mouse X & Y on button press
- \*(Ps = \*1\*0 \(-> Hide toolbar (rxvt)
- \*(Ps = \*1\*2 \(-> Stop Blinking Cursor (att610)
- \*(Ps = \*1\*8 \(-> Don't print form feed (DECPFF)
- \*(Ps = \*1\*9 \(-> Limit print to scrolling region (DECPEX)
- \*(Ps = \*2\*5 \(-> Hide Cursor (DECTCEM)
- \*(Ps = \*3\*0 \(-> Don't show scrollbar (rxvt).
- \*(Ps = \*3\*5 \(-> Disable font-shifting functions (rxvt).
- \*(Ps = \*4\*0 \(-> Disallow 80 \z\(<-\(-> 132 Mode
- \*(Ps = \*4\*1 \(-> No \fImore\fP(1) fix (see \fBcurses\fP resource)
- \*(Ps = \*4\*2 \(-> Disable Nation Replacement Character sets (DECNRCM)
- \*(Ps = \*4\*4 \(-> Turn Off Margin Bell
- \*(Ps = \*4\*5 \(-> No Reverse-wraparound Mode
- \*(Ps = \*4\*6 \(-> Stop Logging
-(normally disabled by a compile-time option)
- \*(Ps = \*4\*7 \(-> Use Normal Screen Buffer
- \*(Ps = \*6\*6 \(-> Numeric keypad (DECNKM)
- \*(Ps = \*6\*7 \(-> Backarrow key sends delete (DECBKM)
- \*(Ps = \*1\*0\*0\*0 \(-> Don't Send Mouse X & Y on button press and
-release.
-See the section \fBMouse Tracking\fP.
- \*(Ps = \*1\*0\*0\*1 \(-> Don't Use Hilite Mouse Tracking
- \*(Ps = \*1\*0\*0\*2 \(-> Don't Use Cell Motion Mouse Tracking
- \*(Ps = \*1\*0\*0\*3 \(-> Don't Use All Motion Mouse Tracking
- \*(Ps = \*1\*0\*1\*0 \(-> Don't scroll to bottom on tty output (rxvt).
- \*(Ps = \*1\*0\*1\*1 \(-> Don't scroll to bottom on key press (rxvt).
- \*(Ps = \*1\*0\*3\*5 \(-> Disable special modifiers for Alt and NumLock keys.
- \*(Ps = \*1\*0\*3\*6 \(-> Don't send ESC when Meta modifies a key
-(disables the \fBmetaSendsEscape\fP resource).
- \*(Ps = \*1\*0\*3\*7 \(-> Send VT220 Remove from the editing-keypad Delete key
- \*(Ps = \*1\*0\*4\*7 \(-> Use Normal Screen Buffer, clearing screen
-first if in the Alternate Screen (unless
-disabled by the \fBtiteInhibit\fP resource)
- \*(Ps = \*1\*0\*4\*8 \(-> Restore cursor as in DECRC (unless
-disabled by the \fBtiteInhibit\fP resource)
- \*(Ps = \*1\*0\*4\*9 \(-> Use Normal Screen Buffer and restore cursor
-as in DECRC (unless
-disabled by the \fBtiteInhibit\fP resource).
-This combines the effects of the \*1\*0\*4\*7 and \*1\*0\*4\*8 modes.
-Use this with terminfo-based applications rather than the \*4\*7 mode.
- \*(Ps = \*1\*0\*5\*1 \(-> Reset Sun function-key mode.
- \*(Ps = \*1\*0\*5\*2 \(-> Reset HP function-key mode.
- \*(Ps = \*1\*0\*5\*3 \(-> Reset SCO function-key mode.
- \*(Ps = \*1\*0\*6\*0 \(-> Reset legacy keyboard emulation (X11R6).
- \*(Ps = \*1\*0\*6\*1 \(-> Reset Sun/PC keyboard emulation of VT220 keyboard.
- \*(Ps = \*2\*0\*0\*4 \(-> Reset bracketed paste mode.
-.
-.IP \\*(Cs\\*(Pm\\*s\\*m
-Character Attributes (SGR)
- \*(Ps = \*0 \(-> Normal (default)
- \*(Ps = \*1 \(-> Bold
- \*(Ps = \*4 \(-> Underlined
- \*(Ps = \*5 \(-> Blink (appears as Bold)
- \*(Ps = \*7 \(-> Inverse
- \*(Ps = \*8 \(-> Invisible, i.e., hidden (VT300)
- \*(Ps = \*2\*2 \(-> Normal (neither bold nor faint)
- \*(Ps = \*2\*4 \(-> Not underlined
- \*(Ps = \*2\*5 \(-> Steady (not blinking)
- \*(Ps = \*2\*7 \(-> Positive (not inverse)
- \*(Ps = \*2\*8 \(-> Visible, i.e., not hidden (VT300)
- \*(Ps = \*3\*0 \(-> Set foreground color to Black
- \*(Ps = \*3\*1 \(-> Set foreground color to Red
- \*(Ps = \*3\*2 \(-> Set foreground color to Green
- \*(Ps = \*3\*3 \(-> Set foreground color to Yellow
- \*(Ps = \*3\*4 \(-> Set foreground color to Blue
- \*(Ps = \*3\*5 \(-> Set foreground color to Magenta
- \*(Ps = \*3\*6 \(-> Set foreground color to Cyan
- \*(Ps = \*3\*7 \(-> Set foreground color to White
- \*(Ps = \*3\*9 \(-> Set foreground color to default (original)
- \*(Ps = \*4\*0 \(-> Set background color to Black
- \*(Ps = \*4\*1 \(-> Set background color to Red
- \*(Ps = \*4\*2 \(-> Set background color to Green
- \*(Ps = \*4\*3 \(-> Set background color to Yellow
- \*(Ps = \*4\*4 \(-> Set background color to Blue
- \*(Ps = \*4\*5 \(-> Set background color to Magenta
- \*(Ps = \*4\*6 \(-> Set background color to Cyan
- \*(Ps = \*4\*7 \(-> Set background color to White
- \*(Ps = \*4\*9 \(-> Set background color to default (original).
-.sp
-If 16-color support is compiled, the following apply.
-Assume that \fIxterm\fP's resources
-are set so that the ISO color codes are the first 8 of a set of 16.
-Then the \fIaixterm\fP colors are the bright versions of the ISO colors:
- \*(Ps = \*9\*0 \(-> Set foreground color to Black
- \*(Ps = \*9\*1 \(-> Set foreground color to Red
- \*(Ps = \*9\*2 \(-> Set foreground color to Green
- \*(Ps = \*9\*3 \(-> Set foreground color to Yellow
- \*(Ps = \*9\*4 \(-> Set foreground color to Blue
- \*(Ps = \*9\*5 \(-> Set foreground color to Magenta
- \*(Ps = \*9\*6 \(-> Set foreground color to Cyan
- \*(Ps = \*9\*7 \(-> Set foreground color to White
- \*(Ps = \*1\*0\*0 \(-> Set background color to Black
- \*(Ps = \*1\*0\*1 \(-> Set background color to Red
- \*(Ps = \*1\*0\*2 \(-> Set background color to Green
- \*(Ps = \*1\*0\*3 \(-> Set background color to Yellow
- \*(Ps = \*1\*0\*4 \(-> Set background color to Blue
- \*(Ps = \*1\*0\*5 \(-> Set background color to Magenta
- \*(Ps = \*1\*0\*6 \(-> Set background color to Cyan
- \*(Ps = \*1\*0\*7 \(-> Set background color to White
-.sp
-If \fIxterm\fP is compiled with the 16-color support disabled, it supports
-the following, from \fIrxvt\fP:
- \*(Ps = \*1\*0\*0 \(-> Set foreground and background color to default
-.sp
-If 88- or 256-color support is compiled, the following apply.
- \*(Ps = \*3\*8 ; \*5 ; \*(Ps \(-> Set foreground color to the second \*(Ps
- \*(Ps = \*4\*8 ; \*5 ; \*(Ps \(-> Set background color to the second \*(Ps
-.sp
-.
-.IP \\*(Cs\\*(Ps\\*s\\*n
-Device Status Report (DSR)
- \*(Ps = \*5 \(-> Status Report \*(Cs\*0\*n (``OK'')
- \*(Ps = \*6 \(-> Report Cursor Position (CPR) [row;column] as
-.br
-\*(Cs\*(Ir\*s\*;\*(Ic\*s\*R
-.
-.IP \\*(Cs\\*?\\*(Ps\\*s\\*n
-Device Status Report (DSR, DEC-specific)
- \*(Ps = \*6 \(-> Report Cursor Position (CPR) [row;column] as
-\*(Cs\*?\*(Ir\*s\*;\*(Ic\*s\*R
-(assumes page is zero).
- \*(Ps = \*1\*5 \(-> Report Printer status as
-\*(Cs\*?\*1\*0\*s\*n (ready)
-or
-\*(Cs\*?\*1\*1\*s\*n (not ready)
- \*(Ps = \*2\*5 \(-> Report UDK status as
-\*(Cs\*?\*2\*0\*s\*n (unlocked)
-or
-\*(Cs\*?\*2\*1\*s\*n (locked)
- \*(Ps = \*2\*6 \(-> Report Keyboard status as
-.br
-\*(Cs\*?\*2\*7\*s\*;\*s\*1\*s\*;\*s\*0\*s\*;\*s\*0\*s\*n (North American)
-.br
-The last two parameters apply to VT400 & up, and denote keyboard ready and LK01 respectively.
- \*(Ps = \*5\*3 \(-> Report Locator status as
-.br
-\*(Cs\*?\*5\*3\*s\*n Locator available, if compiled-in, or
-.br
-\*(Cs\*?\*5\*0\*s\*n No Locator, if not.
-.
-.IP \\*(Cs\\*!\\*p
-Soft terminal reset (DECSTR)
-.
-.IP \\*(Cs\\*(Ps\\*s\\*;\\*(Ps\\*s\\*(c"\\*p
-Set conformance level (DECSCL)
-Valid values for the first parameter:
- \*(Ps = \*6\*1 \(-> VT100
- \*(Ps = \*6\*2 \(-> VT200
- \*(Ps = \*6\*3 \(-> VT300
-.br
-Valid values for the second parameter:
- \*(Ps = \*0 \(-> 8-bit controls
- \*(Ps = \*1 \(-> 7-bit controls (always set for VT100)
- \*(Ps = \*2 \(-> 8-bit controls
-.
-.IP \\*(Cs\\*(Ps\\*s\\*(c"\\*q
-Select character protection attribute (DECSCA).
-Valid values for the parameter:
- \*(Ps = \*0 \(-> DECSED and DECSEL can erase (default)
- \*(Ps = \*1 \(-> DECSED and DECSEL cannot erase
- \*(Ps = \*2 \(-> DECSED and DECSEL can erase
-.
-.IP \\*(Cs\\*(Ps\\*s\\*;\\*(Ps\\*s\\*r
-Set Scrolling Region [top;bottom] (default = full size of window) (DECSTBM)
-.
-.IP \\*(Cs\\*?\\*(Pm\\*s\\*r
-Restore DEC Private Mode Values. The value of \*(Ps previously saved is
-restored. \*(Ps values are the same as for DECSET.
-.
-.IP \\*(Cs\\*(Pt\\*;\\*(Pl\\*;\\*(Pb\\*;\\*(Pr\\*;\\*(Ps\\*$\\*r
-Change Attributes in Rectangular Area (DECCARA).
- \*(Pt\*;\*(Pl\*;\*(Pb\*;\*(Pr denotes the rectangle.
- \*(Ps denotes the SGR attributes to change: 0, 1, 4, 5, 7
-.
-.IP \\*(Cs\\*(cs
-Save cursor (ANSI.SYS)
-.
-.IP \\*(Cs\\*?\\*(Pm\\*s\\*(cs
-Save DEC Private Mode Values. \*(Ps values are the same as for DECSET.
-.
-.IP \\*(Cs\\*(Ps\\*s\\*;\\*(Ps\\*s\\*;\\*(Ps\\*s\\*t
-Window manipulation (from \fIdtterm\fP, as well as extensions).
-These controls may be disabled using the \fIallowWindowOps\fP resource.
-Valid values for the first (and any additional parameters) are:
- \*(Ps = \*1 \(-> De-iconify window.
- \*(Ps = \*2 \(-> Iconify window.
- \*(Ps = \*3 ; \fIx ; y\fP \(-> Move window to [x, y].
- \*(Ps = \*4 ; \fIheight ; width\fP \(-> Resize the \fIxterm\fP window to height and width in pixels.
- \*(Ps = \*5 \(-> Raise the \fIxterm\fP window to the front of the stacking order.
- \*(Ps = \*6 \(-> Lower the \fIxterm\fP window to the bottom of the stacking order.
- \*(Ps = \*7 \(-> Refresh the \fIxterm\fP window.
- \*(Ps = \*8 ; \fIheight ; width\fP \(-> Resize the text area to [height;width] in characters.
- \*(Ps = \*9 ; \*0 \(-> Restore maximized window.
- \*(Ps = \*9 ; \*1 \(-> Maximize window (i.e., resize to screen size).
- \*(Ps = \*1\*1 \(-> Report \fIxterm\fP window state.
-If the \fIxterm\fP window is open (non-iconified), it returns \*(Cs\*1\*t.
-If the \fIxterm\fP window is iconified, it returns \*(Cs\*2\*t.
- \*(Ps = \*1\*3 \(-> Report \fIxterm\fP window position as
-\*(Cs\*3\*;\*(Ix\*;\*(Iy\*t
- \*(Ps = \*1\*4 \(-> Report \fIxterm\fP window in pixels as
-\*(Cs\*s\*4\*s\*;\*s\fIheight\fP\*s\*;\*s\fIwidth\fP\*s\*t
- \*(Ps = \*1\*8 \(-> Report the size of the text area in characters as
-\*(Cs\*s\*8\*s\*;\*s\fIheight\fP\*s\*;\*s\fIwidth\fP\*s\*t
- \*(Ps = \*1\*9 \(-> Report the size of the screen in characters as
-\*(Cs\*s\*9\*s\*;\*s\fIheight\fP\*s\*;\*s\fIwidth\fP\*s\*t
- \*(Ps = \*2\*0 \(-> Report \fIxterm\fP window's icon label as
-\*(Os\*s\*L\*s\fIlabel\fP\*s\*(ST
- \*(Ps = \*2\*1 \(-> Report \fIxterm\fP window's title as
-\*(Os\*s\*l\*s\fItitle\fP\*s\*(ST
- \*(Ps >= \*2\*4 \(-> Resize to \*(Ps lines (DECSLPP)
-.
-.IP \\*(Cs\\*(Pt\\*;\\*(Pl\\*;\\*(Pb\\*;\\*(Pr\\*;\\*(Ps\\*$\\*t
-Reverse Attributes in Rectangular Area (DECRARA).
- \*(Pt\*;\*(Pl\*;\*(Pb\*;\*(Pr denotes the rectangle.
- \*(Ps denotes the attributes to reverse. 1, 4, 5, 7
-.
-.IP \\*(Cs\\*u
-Save cursor (ANSI.SYS)
-.
-.IP \\*(Cs\\*(Pt\\*;\\*(Pl\\*;\\*(Pb\\*;\\*(Pr\\*;\\*(Pp\\*;\\*(Pt\\*;\\*(Pl\\*;\\*(Pp\\*$\\*v
-Copy Rectangular Area (DECCRA)
- \*(Pt\*;\*(Pl\*;\*(Pb\*;\*(Pr denotes the rectangle.
- \*(Pp denotes the source page.
- \*(Pt\*;\*(Pl denotes the target location.
- \*(Pp denotes the target page.
-.
-.IP \\*(Cs\\*(Pt\\*s\\*;\\*(Pl\\*s\\*;\\*(Pb\\*s\\*;\\*(Pr\\*s\\*(qu\\*w
-Enable Filter Rectangle (DECEFR)
-.br
-Parameters are [top;left;bottom;right].
-.br
-Defines the coordinates of a filter rectangle and activates it.
-Anytime the locator is detected outside of the filter rectangle,
-an outside rectangle event is generated and the rectangle is disabled.
-Filter rectangles are always treated as "one-shot" events.
-Any parameters that are omitted default to the current locator position.
-If all parameters are omitted, any locator motion will be reported.
-DECELR always cancels any prevous rectangle definition.
-.
-.IP \\*(Cs\\*(Ps\\*s\\*x
-Request Terminal Parameters (DECREQTPARM)
-.br
-if \*(Ps is a "0" (default) or "1", and \fBxterm\fR is emulating VT100,
-the control sequence elicits a response of the same form
-whose parameters describe the terminal:
- \*(Ps \(-> the given \*(Ps incremented by 2.
- \*1 \(-> no parity
- \*1 \(-> eight bits
- \*1 \*2 \*8 \(-> transmit 38.4k baud
- \*1 \*2 \*8 \(-> receive 38.4k baud
- \*1 \(-> clock multiplier
- \*0 \(-> STP flags
-.
-.IP \\*(Cs\\*(Ps\\*s\\*x
-Select Attribute Change Extent (DECSACE).
- \*(Ps = \*0 \(-> from start to end position, wrapped
- \*(Ps = \*1 \(-> from start to end position, wrapped
- \*(Ps = \*2 \(-> rectangle (exact).
-.
-.IP \\*(Cs\\*(Pc\\*;\\*(Pt\\*;\\*(Pl\\*;\\*(Pb\\*;\\*(Pr\\*$\\*x
-Fill Rectangular Area (DECFRA).
- \*(Pc is the character to use.
- \*(Pt\*;\*(Pl\*;\*(Pb\*;\*(Pr denotes the rectangle.
-.
-.IP \\*(Cs\\*(Ps\\*s\\*;\\*(Pu\\*s\\*(qu\\*z
-Enable Locator Reporting (DECELR)
-.br
-Valid values for the first parameter:
- \*(Ps = \*0 \(-> Locator disabled (default)
- \*(Ps = \*1 \(-> Locator enabled
- \*(Ps = \*2 \(-> Locator enabled for one report, then disabled
-.br
-The second parameter specifies the coordinate unit for locator reports.
-.br
-Valid values for the second parameter:
- \*(Pu = \*0 or omitted \(-> default to character cells
- \*(Pu = \*1 \(-> device physical pixels
- \*(Pu = \*2 \(-> character cells
-.
-.IP \\*(Cs\\*(Pt\\*;\\*(Pl\\*;\\*(Pb\\*;\\*(Pr\\*$\\*z
-Erase Rectangular Area (DECERA).
- \*(Pt\*;\*(Pl\*;\*(Pb\*;\*(Pr denotes the rectangle.
-.
-.IP \\*(Cs\\*(Pm\\*s\\*(qu\\*{
-Select Locator Events (DECSLE)
-.br
-Valid values for the first (and any additional parameters) are:
- \*(Ps = \*0 \(-> only respond to explicit host requests (DECRQLP)
- (default) also cancels any filter rectangle
- \*(Ps = \*1 \(-> report button down transitions
- \*(Ps = \*2 \(-> do not report button down transitions
- \*(Ps = \*3 \(-> report button up transitions
- \*(Ps = \*4 \(-> do not report button up transitions
-.
-.IP \\*(Cs\\*(Pt\\*;\\*(Pl\\*;\\*(Pb\\*;\\*(Pr\\*$\\*{
-Selective Erase Rectangular Area (DECSERA).
- \*(Pt\*;\*(Pl\*;\*(Pb\*;\*(Pr denotes the rectangle.
-.
-.IP \\*(Cs\\*(Ps\\*s\\*(qu\\*|
-Request Locator Position (DECRQLP)
-.br
-Valid values for the parameter are:
- \*(Ps = \*0, 1 or omitted \(-> transmit a single DECLRP locator report
-.sp
-If Locator Reporting has been enabled by a DECELR, xterm will respond
-with a DECLRP Locator Report. This report is also generated on button
-up and down events if they have been enabled with a DECSLE, or when
-the locator is detected outside of a filter rectangle, if filter rectangles
-have been enabled with a DECEFR.
-.sp
- \(-> \*(Cs\*(Pe\*s\*;\*(Pb\*s\*;\*(Pr\*s\*;\*(Pc\*s\*;\*(Pp\*s\*&\*s\*w
-.sp
-Parameters are [event;button;row;column;page].
-.br
-Valid values for the event:
- \*(Pe = \*0 \(-> locator unavailable - no other parameters sent
- \*(Pe = \*1 \(-> request - xterm received a DECRQLP
- \*(Pe = \*2 \(-> left button down
- \*(Pe = \*3 \(-> left button up
- \*(Pe = \*4 \(-> middle button down
- \*(Pe = \*5 \(-> middle button up
- \*(Pe = \*6 \(-> right button down
- \*(Pe = \*7 \(-> right button up
- \*(Pe = \*8 \(-> M4 button down
- \*(Pe = \*9 \(-> M4 button up
- \*(Pe = \*1\*0 \(-> locator outside filter rectangle
-.br
-``button'' parameter is a bitmask indicating which buttons are pressed:
- \*(Pb = \*0 \(-> no buttons down
- \*(Pb & \*1 \(-> right button down
- \*(Pb & \*2 \(-> middle button down
- \*(Pb & \*4 \(-> left button down
- \*(Pb & \*8 \(-> M4 button down
-.br
-``row'' and ``column'' parameters are the coordinates of the locator
-position in the xterm window, encoded as ASCII decimal.
-.br
-The ``page'' parameter is not used by xterm, and will be omitted.
-.
-.Ed
-.
-.St
-.LP
-.B
-Operating System Controls
-.
-.IP \\*(Os\\*(Ps\\*s\\*;\\*(Pt\\*s\\*(ST
-.IP \\*(Os\\*(Ps\\*s\\*;\\*(Pt\\*s\\*(Be
-Set Text Parameters.
-For colors and font,
-if \*(Pt is a "?", the control sequence elicits a response which consists
-of the control sequence which would set the corresponding value.
-The \fIdtterm\fP control sequences allow you to determine the icon name
-and window title.
- \*(Ps = \*0 \(-> Change Icon Name and Window Title to \*(Pt
- \*(Ps = \*1 \(-> Change Icon Name to \*(Pt
- \*(Ps = \*2 \(-> Change Window Title to \*(Pt
- \*(Ps = \*3 \(-> Set X property on top-level window. \*(Pt should be in the form
-"\fIprop=value\fP", or just "\fIprop\fP" to delete the property
- \*(Ps = \*4 ; \fIc ; spec\fP \(-> Change Color Number \fIc\fP to
-the color specified by \fIspec\fP,
-i.e., a name or RGB specification as per \fIXParseColor\fP.
-Any number of \fIc name\fP pairs may be given.
-The color numbers correspond to the ANSI colors 0-7,
-their bright versions 8-15,
-and if supported, the remainder of the 88-color or 256-color table.
-.sp
-If a "?" is given rather than a name or RGB specification,
-xterm replies with a control sequence of the same form which can be used
-to set the corresponding color.
-Because more than one pair of color number and specification can
-be given in one control sequence, \fBxterm\fR can make more than one reply.
-.sp
-The 8 colors which may be set using \*1\*0 through \*1\*7 are
-denoted \fIdynamic colors\fR, since the corresponding control sequences
-were the first means for setting \fBxterm\fR's colors dynamically,
-i.e., after it was started.
-They are not the same as the ANSI colors.
-One or more parameters is expected for \*(Pt.
-Each successive parameter changes the next color in the list.
-The value of \*(Ps tells the starting point in the list.
-The colors are specified by name or RGB specification as per \fIXParseColor\fP.
-.sp
-If a "?" is given rather than a name or RGB specification,
-xterm replies with a control sequence of the same form which can be used
-to set the corresponding dynamic color.
-Because more than one pair of color number and specification can
-be given in one control sequence, \fBxterm\fR can make more than one reply.
-.sp
- \*(Ps = \*1\*0 \(-> Change VT100 text foreground color to \*(Pt
- \*(Ps = \*1\*1 \(-> Change VT100 text background color to \*(Pt
- \*(Ps = \*1\*2 \(-> Change text cursor color to \*(Pt
- \*(Ps = \*1\*3 \(-> Change mouse foreground color to \*(Pt
- \*(Ps = \*1\*4 \(-> Change mouse background color to \*(Pt
- \*(Ps = \*1\*5 \(-> Change Tektronix foreground color to \*(Pt
- \*(Ps = \*1\*6 \(-> Change Tektronix background color to \*(Pt
- \*(Ps = \*1\*7 \(-> Change highlight color to \*(Pt
- \*(Ps = \*1\*8 \(-> Change Tektronix cursor color to \*(Pt
-.sp
- \*(Ps = \*4\*6 \(-> Change Log File to \*(Pt (normally disabled by a
-compile-time option)
-.sp
- \*(Ps = \*5\*0 \(-> Set Font to \*(Pt
-If \*(Pt begins with a "#", index in the font menu, relative (if the
-next character is a plus or minus sign) or absolute. A number is
-expected but not required after the sign (the default is the current
-entry for relative, zero for absolute indexing).
-.sp
- \*(Ps = \*5\*1 (reserved for Emacs shell)
-.sp
- \*(Ps = \*5\*2 \(-> Manipulate Selection Data.
-These controls may be disabled using the \fIallowWindowOps\fP resource.
-The parameter \*(Pt is parsed as
-.br
- \*(Pc\*;\*(Pd
-.br
-The first, \*(Pc, may contain any character from the
-set \*c \*p \*0 \*1 \*2 \*3 \*4 \*5 \*6 \*7.
-It is used to construct a list of selection parameters for
-clipboard,
-primary,
-or cut buffers 0 through 8 respectively,
-in the order given.
-If the parameter is empty, \fIxterm\fP uses \*p\*0,
-to specify the primary selection and cut buffer 0.
-.br
-The second parameter, \*(Pd, gives the selection data.
-Normally this is a string encoded in base64.
-The data becomes the new selection,
-which is then available for pasting by other applications.
-.br
-If the second parameter is a \*?,
-\fIxterm\fP replies to the host with the selection
-data encoded using the same protocol.
-.Ed
-.
-.St
-.LP
-.B
-Privacy Message
-.IP \\*(PM\\*(Pt\\*s\\*(ST
-\fIxterm\fP implements no \*(PM functions; \*(Pt is ignored.
-\*(Pt need not be printable characters.
-.Ed
-.
-.SH
-PC-Style Function Keys
-.ds RH Function Keys
-.LP
-If \fIxterm\fP does minimal translation of the function keys, it usually does this
-with a PC-style keyboard, so PC-style function keys result.
-Sun keyboards are similar to PC keyboards.
-Both have cursor and scrolling operations printed on the keypad,
-which duplicate the smaller cursor and scrolling keypads.
-.LP
-X does not predefine NumLock (used for VT220 keyboards) or Alt (used as
-an extension for the Sun/PC keyboards) as modifiers.
-These keys are recognized as modifiers when enabled
-by the \fBnumLock\fP resource,
-or by the DECSET \*1\*0\*3\*5 control sequence.
-.LP
-The cursor keys transmit the following escape sequences depending on the
-mode specified via the \fBDECCKM\fP escape sequence.
-.TS
-center;
-cf3 cf3 cf3
-lf3w(2c) lf3w(2c) lf3w(2c) .
-Key Normal Application
-_
-Cursor Up \*(Cs\*A \*(S3\*A
-Cursor Down \*(Cs\*(cB \*(S3\*(cB
-Cursor Right \*(Cs\*C \*(S3\*C
-Cursor Left \*(Cs\*D \*(S3\*D
-_
-.TE
-The home- and end-keys
-(unlike PageUp and other keys also on the 6-key editing keypad)
-are considered "cursor keys" by \fIxterm\fP.
-Their mode is also controlled by the \fBDECCKM\fP escape sequence:
-.TS
-center;
-cf3 cf3 cf3
-lf3w(2c) lf3w(2c) lf3w(2c) .
-Key Normal Application
-_
-Home \*(Cs\*H \*(S3\*H
-End \*(Cs\*F \*(S3\*F
-_
-.TE
-.LP
-The application keypad transmits the following escape sequences depending on the
-mode specified via the \fBDECPNM\fP and \fBDECPAM\fP escape sequences.
-Use the NumLock key to override the application mode.
-.LP
-Not all keys are present on the Sun/PC keypad (e.g., PF1, Tab), but are supported by
-the program.
-.TS
-center;
-cf3 cf3 cf3 cf3 cf3
-lf3w(2c) lf3w(2c) lf3w(2c) lf3w(2c) lf3w(2c) .
-Key Numeric Application Terminfo Termcap
-_
-Space \*(Sp \*(S3\*(Sp - -
-Tab \*(Ta \*(S3\*I - -
-Enter \*(Cr \*(S3\*M kent @8
-PF1 \*(S3\*P \*(S3\*P kf1 k1
-PF2 \*(S3\*Q \*(S3\*Q kf2 k2
-PF3 \*(S3\*R \*(S3\*R kf3 k3
-PF4 \*(S3\*S \*(S3\*S kf4 k4
-* \f1(multiply)\fP \** \*(S3\*j - -
-+ \f1(add)\fP \*+ \*(S3\*k - -
-, \f1(comma)\fP \*, \*(S3\*l - -
-- \f1(minus)\fP \*- \*(S3\*m - -
-\&. \f1(Delete)\fP \*. \*(Cs\*3\*(c~ - -
-/ \f1(divide)\fP \*/ \*(S3\*o - -
-0 \f1(Insert)\fP \*0 \*(Cs\*2\*(c~ - -
-1 \f1(End)\fP \*1 \*(S3\*F kc1 K4
-2 \f1(DownArrow)\fP \*2 \*(Cs\*(cB - -
-3 \f1(PageDown)\fP \*3 \*(Cs\*6\*(c~ kc3 K5
-4 \f1(LeftArrow)\fP \*4 \*(Cs\*D - -
-5 \f1(Begin)\fP \*5 \*(Cs\*E kb2 K2
-6 \f1(RightArrow)\fP \*6 \*(Cs\*C - -
-7 \f1(Home)\fP \*7 \*(S3\*H ka1 K1
-8 \f1(UpArrow)\fP \*8 \*(Cs\*A - -
-9 \f1(PageUp)\fP \*9 \*(Cs\*5\*(c~ ka3 K3
-= (equal) \*= \*(S3\*(XX - -
-_
-.TE
-They also provide 12 function keys, as well as a few other special-purpose keys.
-.TS
-center;
-cf3 cf3
-lf3w(2c) lf3w(2c) .
-Key Escape Sequence
-_
-F1 \*(S3\*P
-F2 \*(S3\*Q
-F3 \*(S3\*R
-F4 \*(S3\*S
-F5 \*(Cs\*1\*5\*(c~
-F6 \*(Cs\*1\*7\*(c~
-F7 \*(Cs\*1\*8\*(c~
-F8 \*(Cs\*1\*9\*(c~
-F9 \*(Cs\*2\*0\*(c~
-F10 \*(Cs\*2\*1\*(c~
-F11 \*(Cs\*2\*3\*(c~
-F12 \*(Cs\*2\*4\*(c~
-_
-.TE
-.LP
-Older versions of \fIxterm\fP implement different escape sequences for F1 through F4.
-These can be activated by setting the \fBoldXtermFKeys\fP resource.
-However, since they do not correspond to any hardware terminal, they have been deprecated.
-(The DEC VT220 reserves F1 through F5 for local functions such as \fBSetup\fP).
-.TS
-center;
-cf3 cf3
-lf3w(2c) lf3w(2c) .
-Key Escape Sequence
-_
-F1 \*(Cs\*1\*1\*(c~
-F2 \*(Cs\*1\*2\*(c~
-F3 \*(Cs\*1\*3\*(c~
-F4 \*(Cs\*1\*4\*(c~
-_
-.TE
-In normal mode, i.e., a Sun/PC keyboard
-when the \fBsunKeyboard\fP resource is false,
-\fIxterm\fP recognizes function key modifiers
-which are parameters appended before the final character
-of the control sequence.
-.TS
-center;
-cf3 lf3
-cf3w(2c) lf3w(2c) .
-Code Modifiers
-_
-2 Shift
-3 Alt
-4 Shift + Alt
-5 Control
-6 Shift + Control
-7 Alt + Control
-8 Shift + Alt + Control
-_
-.TE
-For example, shift-F5 would be sent as
-\*(Cs\*1\*5\*;\*2\*(c~
-
-If the \fBalwaysUseMods\fP resource is set, the Meta modifier also is
-recognized, making parameters 9 through 16.
-.SH
-VT220-Style Function Keys
-.LP
-However, \fIxterm\fP is most useful as a DEC VT102 or VT220 emulator.
-Set the \fBsunKeyboard\fP resource to true to force a Sun/PC keyboard
-to act like a VT220 keyboard.
-.LP
-The VT102/VT220 application keypad transmits unique escape sequences in
-application mode, which are distinct from the cursor and scrolling keypad:
-.TS
-center;
-cf3 cf3 cf3
-lf3w(2c) lf3w(2c) lf3w(2c) .
-Key Numeric Application
-_
-Space \*(Sp \*(S3\*(Sp
-Tab \*(Ta \*(S3\*I
-Enter \*(Cr \*(S3\*M
-PF1 \*(S3\*P \*(S3\*P
-PF2 \*(S3\*Q \*(S3\*Q
-PF3 \*(S3\*R \*(S3\*R
-PF4 \*(S3\*S \*(S3\*S
-* \f1(multiply)\fP \** \*(S3\*j
-+ \f1(add)\fP \*+ \*(S3\*k
-, \f1(comma)\fP \*, \*(S3\*l
-- \f1(minus)\fP \*- \*(S3\*m
-\&. \f1(period)\fP \*. \*(S3\*n
-/ \f1(divide)\fP \*/ \*(S3\*o
-0 \*0 \*(S3\*p
-1 \*1 \*(S3\*q
-2 \*2 \*(S3\*r
-3 \*3 \*(S3\*(cs
-4 \*4 \*(S3\*t
-5 \*5 \*(S3\*u
-6 \*6 \*(S3\*v
-7 \*7 \*(S3\*w
-8 \*8 \*(S3\*x
-9 \*9 \*(S3\*y
-= (equal) \*= \*(S3\*(XX
-_
-.TE
-The VT220 provides a 6-key editing keypad,
-which is analogous to that on the PC keyboard.
-It is not affected by \fBDECCKM\fP or \fBDECPNM\fP/\fBDECPAM\fP:
-.TS
-center;
-cf3 cf3 cf3
-lf3w(2c) lf3w(2c) lf3w(2c) .
-Key Normal Application
-_
-\f1Insert\fP \*(Cs\*2\*(c~ \*(Cs\*2\*(c~
-\f1Delete\fP \*(Cs\*3\*(c~ \*(Cs\*3\*(c~
-\f1Home\fP \*(Cs\*1\*(c~ \*(Cs\*1\*(c~
-\f1End\fP \*(Cs\*4\*(c~ \*(Cs\*4\*(c~
-\f1PageUp\fP \*(Cs\*5\*(c~ \*(Cs\*5\*(c~
-\f1PageDown\fP \*(Cs\*6\*(c~ \*(Cs\*6\*(c~
-_
-.TE
-.LP
-The VT220 provides 8 additional function keys.
-With a Sun/PC keyboard, access these keys by Control/F1 for F13, etc.
-.TS
-center;
-cf3 cf3
-lf3w(2c) lf3w(2c) .
-Key Escape Sequence
-_
-F13 \*(Cs\*2\*5\*(c~
-F14 \*(Cs\*2\*6\*(c~
-F15 \*(Cs\*2\*8\*(c~
-F16 \*(Cs\*2\*9\*(c~
-F17 \*(Cs\*3\*1\*(c~
-F18 \*(Cs\*3\*2\*(c~
-F19 \*(Cs\*3\*3\*(c~
-F20 \*(Cs\*3\*4\*(c~
-_
-.TE
-.SH
-VT52-Style Function Keys
-.LP
-A VT52 does not have function keys, but it does have a numeric keypad and cursor keys.
-They differ from the other emulations by the prefix.
-Also, the cursor keys do not change:
-.TS
-center;
-cf3 cf3
-lf3w(2c) lf3w(2c) .
-Key Normal/Application
-_
-Cursor Up \*(Es\*A
-Cursor Down \*(Es\*(cB
-Cursor Right \*(Es\*C
-Cursor Left \*(Es\*D
-_
-.TE
-The keypad is similar:
-.TS
-center;
-cf3 cf3 cf3
-lf3w(2c) lf3w(2c) lf3w(2c) .
-Key Numeric Application
-_
-Space \*(Sp \*(Es\*?\*(Sp
-Tab \*(Ta \*(Es\*?\*I
-Enter \*(Cr \*(Es\*?\*M
-PF1 \*(Es\*P \*(Es\*P
-PF2 \*(Es\*Q \*(Es\*Q
-PF3 \*(Es\*R \*(Es\*R
-PF4 \*(Es\*S \*(Es\*S
-* \f1(multiply)\fP \** \*(Es\*?\*j
-+ \f1(add)\fP \*+ \*(Es\*?\*k
-, \f1(comma)\fP \*, \*(Es\*?\*l
-- \f1(minus)\fP \*- \*(Es\*?\*m
-\&. \f1(period)\fP \*. \*(Es\*?\*n
-/ \f1(divide)\fP \*/ \*(Es\*?\*o
-0 \*0 \*(Es\*?\*p
-1 \*1 \*(Es\*?\*q
-2 \*2 \*(Es\*?\*r
-3 \*3 \*(Es\*?\*(cs
-4 \*4 \*(Es\*?\*t
-5 \*5 \*(Es\*?\*u
-6 \*6 \*(Es\*?\*v
-7 \*7 \*(Es\*?\*w
-8 \*8 \*(Es\*?\*x
-9 \*9 \*(Es\*?\*y
-= (equal) \*= \*(Es\*?\*(XX
-_
-.TE
-.SH
-Sun-Style Function Keys
-.LP
-The \fIxterm\fP program provides support for Sun keyboards more directly, by
-a menu toggle that causes it to send Sun-style function key codes rather than VT220.
-Note, however, that the \fIsun\fP and \fIVT100\fP emulations are not really
-compatible. For example, their wrap-margin behavior differs.
-.LP
-Only function keys are altered; keypad and cursor keys are the same.
-The emulation responds identically.
-See the xterm-sun terminfo entry for details.
-.SH
-HP-Style Function Keys
-.LP
-Similarly, \fIxterm\fP can be compiled to support HP keyboards.
-See the xterm-hp terminfo entry for details.
-.SH
-The Alternate Screen Buffer
-.LP
-\fBXterm\fP maintains two screen buffers.
-The normal screen buffer allows you to scroll back to view saved lines
-of output up to the maximum set by the \fBsaveLines\fP resource.
-The alternate screen buffer is exactly as large as the display,
-contains no additional saved lines.
-When the alternate screen buffer is active,
-you cannot scroll back to view saved lines.
-\fBXterm\fP provides control sequences and menu entries
-for switching between the two.
-.LP
-Most full-screen applications use terminfo or termcap to obtain
-strings used to start/stop full-screen mode,
-i.e., \fIsmcup\fP and \fIrmcup\fP for terminfo,
-or the corresponding \fIti\fP and \fIte\fP for termcap.
-The \fBtiteInhibit\fP resource removes the \fIti\fP and \fIte\fP strings
-from the TERMCAP string which is set in the environment for some platforms.
-That is not done when \fBxterm\fP is built with terminfo libraries because
-terminfo does not provide the whole text of the termcap data in one piece.
-It would not work for terminfo anyway, since terminfo data is not passed
-in environment variables;
-setting an environment variable in this manner would have no effect on
-the application's ability to switch between normal and alternate screen
-buffers.
-Instead, the newer private mode controls
-(such as \*1\*0\*4\*9)
-for switching between normal
-and alternate screen buffers simply disable the switching.
-They add other features such as clearing the display for the same reason:
-to make the details of switching independent of the application that
-requests the switch.
-.SH
-Bracketed Paste Mode
-.ds RH Bracketed Paste Mode
-.LP
-When bracketed paste mode is set,
-pasted text is bracketed with control sequences
-so that the program can differentiate pasted text from typed-in text.
-When bracketed paste mode is set,
-the program will receive: ESC [ 200 ~,
-followed by the pasted text, followed by ESC [ 201 ~.
-.SH
-Mouse Tracking
-.ds RH Mouse Tracking
-.LP
-The VT widget can be set to send the mouse position and other
-information on button presses. These modes are typically used by
-editors and other full-screen applications that want to make use of
-the mouse.
-
-There are six mutually exclusive modes.
-One is DEC Locator mode, enabled by the
-DECELR \*(Cs\*(Ps\*s\*;\*(Ps\*s\*s\*'\*s\*z
-control sequence, and is not described here
-(control sequences are summarized above).
-The remaining five
-modes are each enabled (or disabled) by a different parameter in
-DECSET \*(Cs\*?\*(Pm\*s\*h
-or
-DECRST \*(Cs\*?\*(Pm\*s\*l
-control sequence.
-
-Manifest constants for the parameter values
-are defined in \fBxcharmouse.h\fP as follows:
-.
-.DS B
-#define SET_X10_MOUSE 9
-#define SET_VT200_MOUSE 1000
-#define SET_VT200_HIGHLIGHT_MOUSE 1001
-#define SET_BTN_EVENT_MOUSE 1002
-#define SET_ANY_EVENT_MOUSE 1003
-.DE
-.LP
-The motion reporting modes are strictly \fIxterm\fP extensions, and are not
-part of any standard, though they are analogous to the DEC VT200 DECELR
-locator reports.
-
-Parameters (such as pointer position and button number) for all mouse
-tracking escape sequences generated by \fIxterm\fP
-encode numeric parameters in a single character as
-\fIvalue\fP+32.
-For example, \*! specifies the value 1.
-The upper left character position on the terminal is denoted as 1,1.
-
-X10 compatibility mode sends an escape sequence only on button press,
-encoding the location and the mouse button pressed.
-It is enabled by specifying parameter 9 to DECSET.
-On button press, \fIxterm\fP sends
-\*(Cs\*M\*(Cb\*(Cx\*(Cy (6 characters).
-\*(Cb is button\-1.
-\*(Cx and \*(Cy are the x and y coordinates of the mouse when the
-button was pressed.
-
-Normal tracking mode sends an escape sequence on both button press and
-release. Modifier key (shift, ctrl, meta) information is also sent.
-It is enabled by specifying parameter 1000 to DECSET.
-On button press or release, \fIxterm\fP sends
-\*(Cs\*M\*(Cb\*(Cx\*(Cy.
-The low two bits of \*(Cb encode button information:
-0=MB1 pressed, 1=MB2 pressed, 2=MB3 pressed, 3=release.
-The next three bits encode the modifiers which were down when the button was
-pressed and are added together: 4=Shift, 8=Meta, 16=Control.
-Note however that the shift and control bits are normally unavailable
-because \fIxterm\fP uses the control modifier with mouse for popup menus,
-and the shift modifier is used in the default translations for button events.
-The \fIMeta\fP modifier recognized by \fIxterm\fP is the \fImod1\fP mask,
-and is not necessarily the "Meta" key (see \fIxmodmap\fP).
-\*(Cx and \*(Cy are the x and y coordinates of the mouse event, encoded as
-in X10 mode.
-
-Wheel mice may return buttons 4 and 5.
-Those buttons are represented by the same event codes
-as buttons 1 and 2 respectively,
-except that 64 is added to the event code.
-Release events for the wheel buttons are not reported.
-
-Mouse highlight tracking notifies a program of a button press, receives a
-range of lines from the program, highlights the region covered by
-the mouse within that range until button release, and then sends the
-program the release coordinates.
-It is enabled by specifying parameter 1001 to DECSET.
-Highlighting is performed only for button 1, though other button events
-can be received.
-\fBWarning:\fP use of this mode requires a cooperating program or it will
-hang \fIxterm.\fP
-On button press, the same information as for normal tracking is
-generated; \fIxterm\fP then waits for the program to send mouse
-tracking information.
-\fIAll X events are ignored until the proper escape sequence is
-received from the pty:\fP
-\*(Cs\*(Ps\*s\*;\*(Ps\*s\*;\*(Ps\*s\*;\*(Ps\*s\*;\*(Ps\*s\*T.
-The parameters are \fIfunc, startx, starty, firstrow,\fP and \fIlastrow.\fP
-\fIfunc\fP is non-zero to initiate highlight tracking and zero to abort.
-\fIstartx\fP and \fIstarty\fP give the starting x and y location for
-the highlighted region. The ending location tracks the mouse, but
-will never be above row \fIfirstrow\fP and will always be above row
-\fIlastrow.\fP (The top of the screen is row 1.)
-When the button is released, \fIxterm\fP reports the ending position
-one of two ways: if the start and end coordinates are valid text
-locations: \*(Cs\*t\*(Cx\*(Cy. If either coordinate is past
-the end of the line:
-\*(Cs\*T\*(Cx\*(Cy\*(Cx\*(Cy\*(Cx\*(Cy.
-The parameters are \fIstartx, starty, endx, endy, mousex,\fP and \fImousey.\fP
-\fIstartx, starty, endx, \fPand\fI endy\fP give the starting and
-ending character positions of the region. \fImousex\fP and \fImousey\fP
-give the location of the mouse at button up, which may not be over a
-character.
-
-Button-event tracking is essentially the same as normal tracking, but
-\fIxterm\fP also reports button-motion events. Motion events
-are reported only if the mouse pointer has moved to a different character
-cell. It is enabled by specifying parameter 1002 to DECSET.
-On button press or release, \fIxterm\fP sends the same codes used by normal
-tracking mode. On button-motion events, \fIxterm\fP adds 32 to the event code
-(the third character, \*(Cb).
-The other bits of the event code specify button and modifier keys as in normal mode.
-For example, motion into cell x,y with button 1
-down is reported as \*(Cs\*M\*@\*(Cx\*(Cy.
-( \*@ = 32 + 0 (button 1) + 32 (motion indicator) ).
-Similarly, motion with button 3
-down is reported as \*(Cs\*M\*(cB\*(Cx\*(Cy.
-( \*(cB = 32 + 2 (button 3) + 32 (motion indicator) ).
-
-Any-event mode is the same as button-event mode, except that all motion
-events are reported, even if no mouse button is down.
-It is enabled by specifying 1003 to DECSET.
-.
-.br
-.ds RH Tektronix 4014 Mode
-.SH
-Tektronix 4014 Mode
-.LP
-Most of these sequences are standard Tektronix 4014 control sequences.
-Graph mode supports the 12-bit addressing of the Tektronix 4014.
-The major features missing are
-the write-through and defocused modes.
-This document does not describe the commands used in the various
-Tektronix plotting modes but does describe the commands to switch modes.
-.St
-.IP \\*(Be
-Bell (Ctrl-G)
-.IP \\*(Bs
-Backspace (Ctrl-H)
-.IP \\*(Ta
-Horizontal Tab (Ctrl-I)
-.IP \\*(Lf
-Line Feed or New Line (Ctrl-J)
-.IP \\*(Vt
-Cursor up (Ctrl-K)
-.IP \\*(Ff
-Form Feed or New Page (Ctrl-L)
-.IP \\*(Cr
-Carriage Return (Ctrl-M)
-.IP \\*(Es\\*(Et
-Switch to VT100 Mode (ESC Ctrl-C)
-.IP \\*(Es\\*(En
-Return Terminal Status (ESC Ctrl-E)
-.IP \\*(Es\\*(Ff
-PAGE (Clear Screen) (ESC Ctrl-L)
-.IP \\*(Es\\*(So
-Begin 4015 APL mode (ignored by \fIxterm\fP) (ESC Ctrl-N)
-.IP \\*(Es\\*(Si
-End 4015 APL mode (ignored by \fIxterm\fP) (ESC Ctrl-O)
-.IP \\*(Es\\*(Eb
-COPY (Save Tektronix Codes to file COPYyyyy-mm-dd.hh:mm:ss) (ESC Ctrl-W)
-.IP \\*(Es\\*(Ca
-Bypass Condition (ESC Ctrl-X)
-.IP \\*(Es\\*(Su
-GIN mode (ESC Ctrl-Z)
-.IP \\*(Es\\*(Fs
-Special Point Plot Mode (ESC Ctrl-\e)
-.IP \\*(Es\\*8
-Select Large Character Set
-.IP \\*(Es\\*9
-Select #2 Character Set
-.IP \\*(Es\\*:
-Select #3 Character Set
-.IP \\*(Es\\*;
-Select Small Character Set
-.IP \\*(Os\\*(Ps\\*s\\*;\\*(Pt\\*s\\*(Be
-Set Text Parameters of VT window
- \*(Ps = \*0 \(-> Change Icon Name and Window Title to \*(Pt
- \*(Ps = \*1 \(-> Change Icon Name to \*(Pt
- \*(Ps = \*2 \(-> Change Window Title to \*(Pt
- \*(Ps = \*4\*6 \(-> Change Log File to \*(Pt (normally disabled by a
-compile-time option)
-.IP \\*(Es\\*`
-Normal Z Axis and Normal (solid) Vectors
-.IP \\*(Es\\*a
-Normal Z Axis and Dotted Line Vectors
-.IP \\*(Es\\*b
-Normal Z Axis and Dot-Dashed Vectors
-.IP \\*(Es\\*c
-Normal Z Axis and Short-Dashed Vectors
-.IP \\*(Es\\*d
-Normal Z Axis and Long-Dashed Vectors
-.IP \\*(Es\\*h
-Defocused Z Axis and Normal (solid) Vectors
-.IP \\*(Es\\*i
-Defocused Z Axis and Dotted Line Vectors
-.IP \\*(Es\\*j
-Defocused Z Axis and Dot-Dashed Vectors
-.IP \\*(Es\\*k
-Defocused Z Axis and Short-Dashed Vectors
-.IP \\*(Es\\*l
-Defocused Z Axis and Long-Dashed Vectors
-.IP \\*(Es\\*p
-Write-Thru Mode and Normal (solid) Vectors
-.IP \\*(Es\\*q
-Write-Thru Mode and Dotted Line Vectors
-.IP \\*(Es\\*r
-Write-Thru Mode and Dot-Dashed Vectors
-.IP \\*(Es\\*(cs
-Write-Thru Mode and Short-Dashed Vectors
-.IP \\*(Es\\*t
-Write-Thru Mode and Long-Dashed Vectors
-.IP \\*(Fs
-Point Plot Mode (Ctrl-\e)
-.IP \\*(Gs
-Graph Mode (Ctrl-])
-.IP \\*(Rs
-Incremental Plot Mode (Ctrl-^)
-.IP \\*(Us
-Alpha Mode (Ctrl-_)
-.Ed
-.
-.
-.br
-.ds RH VT52 Mode
-.SH
-VT52 Mode
-.LP
-Parameters for cursor movement are at the end of the \*(Es\*Y escape sequence.
-Each ordinate is encoded in a single character as \fIvalue\fP+32.
-For example, \*! is 1.
-The screen coordinate system is 0-based.
-.St
-.IP \\*(Es\\*A
-Cursor up.
-.IP \\*(Es\\*(cB
-Cursor down.
-.IP \\*(Es\\*C
-Cursor right.
-.IP \\*(Es\\*D
-Cursor left.
-.IP \\*(Es\\*F
-Enter graphics mode.
-.IP \\*(Es\\*G
-Exit graphics mode.
-.IP \\*(Es\\*H
-Move the cursor to the home position.
-.IP \\*(Es\\*I
-Reverse line feed.
-.IP \\*(Es\\*J
-Erase from the cursor to the end of the screen.
-.IP \\*(Es\\*K
-Erase from the cursor to the end of the line.
-.IP \\*(Es\\*Y\\*(Ps\\*s\\*(Ps
-Move the cursor to given row and column.
-.IP \\*(Es\\*Z
-Identify
- \(-> \*(Es\*s\*/\*s\*Z (``I am a VT52.'')
-.IP \\*(Es\\*=
-Enter alternate keypad mode.
-.IP \\*(Es\\*>
-Exit alternate keypad mode.
-.IP \\*(Es\\*<
-Exit VT52 mode (Enter VT100 mode).
-.Ed
-.
-.if n .pl \n(nlu+1v