aboutsummaryrefslogtreecommitdiff
path: root/nx-X11/programs/xterm/terminfo
diff options
context:
space:
mode:
Diffstat (limited to 'nx-X11/programs/xterm/terminfo')
-rw-r--r--nx-X11/programs/xterm/terminfo1012
1 files changed, 0 insertions, 1012 deletions
diff --git a/nx-X11/programs/xterm/terminfo b/nx-X11/programs/xterm/terminfo
deleted file mode 100644
index f0b5f4d3a..000000000
--- a/nx-X11/programs/xterm/terminfo
+++ /dev/null
@@ -1,1012 +0,0 @@
-# $XTermId: terminfo,v 1.111 2005/11/03 13:17:28 tom Exp $
-#
-# $Xorg: terminfo,v 1.3 2000/08/17 19:55:10 cpqbld Exp $
-#
-# meml locks memory above the cursor; memu unlocks (ala HP terminals)
-#
-# XFree86 updates/notes/new entries (including xterm-8bit, xterm-16color)
-# - Thomas E. Dickey
-#
-# $XFree86: xc/programs/xterm/terminfo,v 3.57 2005/11/03 13:17:28 dickey Exp $
-#
-# Special Capabilities:
-# --------------------
-# ich has a corresponding capability that inserts a single blank. We could
-# have used ich1=\E[@, which works with ncurses, but that is not standard
-# behavior. If it is set, then SVr4 vi (e.g., Solaris 2.6) emits both
-# smir/rmir and ich1.
-# meml locks memory above the cursor; memu unlocks (ala HP terminals). This
-# is not recognized by some older (e.g., SVr3) tic programs, but none
-# do more than warn about it. Ignore the warning.
-# smcup clears memory before switching to the alternate screen. The older
-# (deprecated) \E[?47h did not do this, requiring applications to
-# embed a \E[2J in the rmcup string. However, that behavior cannot
-# be disabled via titeInhibit, making that resource not function as
-# intended on systems with terminfo.
-# rs2/is2 are shorter with XFree86 xterm because it supports DECSTR. We
-# use the shorter sequence for compatibility with the termcap, which
-# is trimmed to keep it shorter than 1023 characters. It (escape \E[!p)
-# replaces these in the conventional vt100 reset-string:
-# \E7 - save cursor (fixes origin-mode side-effect)
-# \E[r - reset scrolling margins
-# \E[m - reset SGR (including color)
-# \E[?7h - reset wraparound mode (DECAWM)
-# \E[?1l - reset application cursor keys (DECCKM)
-# \E[?6l - reset origin mode (DECOM)
-# \E8 - restore cursor
-# DECSTR is recognized by XFree86 xterm even in vt52 mode.
-#
-# Editing Keypad:
-# --------------
-# XFree86 xterm emulates vt220 if the decTerminalID resource is set to 200 or
-# higher. Otherwise it emulates a vt100 or vt52 depending on the value of the
-# resource. When emulating a vt220, we support the editing keypad. Sun and PC
-# keyboards have an editing keypad which is similar to the vt220:
-#
-# VT220 editing keypad
-# ----------------------------
-# Find Insert Remove
-# Select Prev Next
-# ----------------------------
-#
-# Sun/PC editing keypad
-# ----------------------------
-# Insert Home PageUp
-# Delete End PageDn
-# ----------------------------
-#
-# If the sunKeyboard resource is true, we map it this way (adjusting the values
-# of Home, End and Delete):
-# VT220 Sun/PC
-# ----------------------------
-# Find Home
-# Select End
-# Insert Insert
-# Remove Delete
-# Prev PageUp
-# Next PageDn
-# ----------------------------
-#
-# Note that all of the keys on the editing keypad transmit escape sequences. A
-# vt220 does this only when in vt220 mode; when emulating a vt100 the editing
-# keypad is inactive.
-#
-# Alternative keycodes:
-# --------------------
-# Several of the function keys have alternative names, depending on the type of
-# host which your xterm is connected to. DEC (i.e., the VMS system) uses F15
-# as the HELP key, F16 as the DO key. Unix applications generally do not do
-# this. Curses applications in particular, assign a unique keycode to each
-# capability string. These terminal descriptions do not have conflicting
-# definitions, to ensure that Unix curses applications use a consistent set of
-# keycodes. To get a VMS-bias, make these substitutions:
-# 1. change khome to kfnd
-# 2. change kend to kslt
-# The original xterm-r6 entry does in fact have a VMS bias.
-#
-# Some legacy applications using the termcap emulation may expect kll where
-# we have specified kend.
-#
-# Function keys with modifiers (Sun/PC):
-# -------------------------------------
-# Shift-Fx - kf{12+x}
-# Control-Fx - kf{24+x}
-# Shift-Control-Fx - kf{36+x}
-#
-# The terminfo defines some special keys which are documented as "shifted",
-# e.g., kDC is shifted-delete-character.
-#
-# Note however, that even though the terminfo says a key might be sent, there
-# may be conflicts which prevent this. For example, it is common to use
-# shifted pageup and pagedown for window manager functions. The default
-# translation for xterm since X11R4 has overridden shifted Insert, Select,
-# PageUp and PageDown, which correspond to terminfo kIC, kEND, kPRV and kNXT
-# respectively.
-#
-xterm-new|modern xterm terminal emulator,
- npc,
- indn=\E[%p1%dS,
- kDC=\E[3;2~,
- kEND=\E[1;2F,
- kHOM=\E[1;2H,
- kIC=\E[2;2~,
- kLFT=\E[1;2D,
- kNXT=\E[6;2~,
- kPRV=\E[5;2~,
- kRIT=\E[1;2C,
- kb2=\EOE,
- kcbt=\E[Z,
- kcub1=\EOD,
- kcud1=\EOB,
- kcuf1=\EOC,
- kcuu1=\EOA,
- kend=\EOF,
- kent=\EOM,
- khome=\EOH,
- kich1=\E[2~,
- kind=\E[1;2B,
- kmous=\E[M,
- knp=\E[6~,
- kpp=\E[5~,
- kri=\E[1;2A,
- rin=\E[%p1%dT,
- use=xterm+pcfkeys,
- use=xterm-basic,
-# Encode modifiers using parameters (see ctlseqs.msg).
-# Note that this is unrelated to PCTERM.
-#
-# Some names are extensions allowed by ncurses:
-# kDN, kDN5, kDN6, kLFT5, kLFT6, kRIT5, kRIT6, kUP, kUP5, kUP6
-xterm+pcfkeys|fragment for PC-style keys,
- kf1=\EOP,
- kf10=\E[21~,
- kf11=\E[23~,
- kf12=\E[24~,
- kf13=\EO2P,
- kf14=\EO2Q,
- kf15=\EO2R,
- kf16=\EO2S,
- kf17=\E[15;2~,
- kf18=\E[17;2~,
- kf19=\E[18;2~,
- kf2=\EOQ,
- kf20=\E[19;2~,
- kf21=\E[20;2~,
- kf22=\E[21;2~,
- kf23=\E[23;2~,
- kf24=\E[24;2~,
- kf25=\EO5P,
- kf26=\EO5Q,
- kf27=\EO5R,
- kf28=\EO5S,
- kf29=\E[15;5~,
- kf3=\EOR,
- kf30=\E[17;5~,
- kf31=\E[18;5~,
- kf32=\E[19;5~,
- kf33=\E[20;5~,
- kf34=\E[21;5~,
- kf35=\E[23;5~,
- kf36=\E[24;5~,
- kf37=\EO6P,
- kf38=\EO6Q,
- kf39=\EO6R,
- kf4=\EOS,
- kf40=\EO6S,
- kf41=\E[15;6~,
- kf42=\E[17;6~,
- kf43=\E[18;6~,
- kf44=\E[19;6~,
- kf45=\E[20;6~,
- kf46=\E[21;6~,
- kf47=\E[23;6~,
- kf48=\E[24;6~,
- kf49=\EO3P,
- kf5=\E[15~,
- kf50=\EO3Q,
- kf51=\EO3R,
- kf52=\EO3S,
- kf53=\E[15;3~,
- kf54=\E[17;3~,
- kf55=\E[18;3~,
- kf56=\E[19;3~,
- kf57=\E[20;3~,
- kf58=\E[21;3~,
- kf59=\E[23;3~,
- kf6=\E[17~,
- kf60=\E[24;3~,
- kf61=\EO4P,
- kf62=\EO4Q,
- kf63=\EO4R,
- kf7=\E[18~,
- kf8=\E[19~,
- kf9=\E[20~,
- kDN=\E[1;2B,
- kDN5=\E[1;5B,
- kDN6=\E[1;6B,
- kLFT5=\E[1;5D,
- kLFT6=\E[1;6D,
- kRIT5=\E[1;5C,
- kRIT6=\E[1;6C,
- kUP=\E[1;2A,
- kUP5=\E[1;5A,
- kUP6=\E[1;6A,
-#
-# This chunk is used for building the VT220/Sun/PC keyboard variants.
-xterm-basic|modern xterm terminal emulator - common,
- am,
- bce,
- km,
- mc5i,
- mir,
- msgr,
- xenl,
- colors#8,
- cols#80,
- it#8,
- lines#24,
- pairs#64,
- acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G,
- blink=\E[5m,
- bold=\E[1m,
- cbt=\E[Z,
- civis=\E[?25l,
- clear=\E[H\E[2J,
- cnorm=\E[?12l\E[?25h,
- cr=^M,
- csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD,
- cub1=^H,
- cud=\E[%p1%dB,
- cud1=^J,
- cuf=\E[%p1%dC,
- cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA,
- cuu1=\E[A,
- cvvis=\E[?12;25h,
- dch=\E[%p1%dP,
- dch1=\E[P,
- dl=\E[%p1%dM,
- dl1=\E[M,
- ech=\E[%p1%dX,
- ed=\E[J,
- el=\E[K,
- el1=\E[1K,
- flash=\E[?5h$<100/>\E[?5l,
- home=\E[H,
- hpa=\E[%i%p1%dG,
- ht=^I,
- hts=\EH,
- ich=\E[%p1%d@,
- il=\E[%p1%dL,
- il1=\E[L,
- ind=^J,
- invis=\E[8m,
- is2=\E[!p\E[?3;4l\E[4l\E>,
- kbs=^H,
- kdch1=\E[3~,
- mc0=\E[i,
- mc4=\E[4i,
- mc5=\E[5i,
- meml=\El,
- memu=\Em,
- op=\E[39;49m,
- rc=\E8,
- rev=\E[7m,
- ri=\EM,
- rmacs=\E(B,
- rmam=\E[?7l,
- rmcup=\E[?1049l,
- rmir=\E[4l,
- rmkx=\E[?1l\E>,
- rmso=\E[27m,
- rmul=\E[24m,
- rs1=\Ec,
- rs2=\E[!p\E[?3;4l\E[4l\E>,
- sc=\E7,
- setab=\E[4%p1%dm,
- setaf=\E[3%p1%dm,
- setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
- sgr0=\E[m\E(B,
- smacs=\E(0,
- smam=\E[?7h,
- smcup=\E[?1049h,
- smir=\E[4h,
- smkx=\E[?1h\E=,
- smso=\E[7m,
- smul=\E[4m,
- tbc=\E[3g,
- u6=\E[%i%d;%dR,
- u7=\E[6n,
- u8=\E[?1;2c,
- u9=\E[c,
- vpa=\E[%i%p1%dd,
-#
-# The xterm-new description has all of the features, but is not completely
-# compatible with vt220. If you are using a Sun or PC keyboard, set the
-# sunKeyboard resource to true:
-# + maps the editing keypad
-# + interprets control-function-key as a second array of keys, so a
-# 12-fkey keyboard can support vt220's 20-fkeys.
-# + maps numeric keypad "+" to ",".
-# + uses DEC-style control sequences for the application keypad.
-#
-# Some packagers modify xterm's resource definitions to provide extra function
-# keys by using the shift-modifier in the translations resource. However, that
-# interferes with the DECUDK functionality.
-#
-xterm-vt220|xterm emulating vt220,
- ka1=\EOw,
- ka3=\EOy,
- kb2=\EOu,
- kc1=\EOq,
- kc3=\EOs,
- kcbt=\E[Z,
- kcub1=\EOD,
- kcud1=\EOB,
- kcuf1=\EOC,
- kcuu1=\EOA,
- kend=\E[4~,
- kent=\EOM,
- kf1=\EOP,
- kf10=\E[21~,
- kf11=\E[23~,
- kf12=\E[24~,
- kf13=\E[25~,
- kf14=\E[26~,
- kf15=\E[28~,
- kf16=\E[29~,
- kf17=\E[31~,
- kf18=\E[32~,
- kf19=\E[33~,
- kf2=\EOQ,
- kf20=\E[34~,
- kf3=\EOR,
- kf4=\EOS,
- kf5=\E[15~,
- kf6=\E[17~,
- kf7=\E[18~,
- kf8=\E[19~,
- kf9=\E[20~,
- khome=\E[1~,
- kich1=\E[2~,
- kmous=\E[M,
- knp=\E[6~,
- kpp=\E[5~,
- use=xterm-basic,
-#
-xterm-vt52|xterm emulating dec vt52,
- cols#80,
- it#8,
- lines#24,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G,
- clear=\EH\EJ,
- cr=^M,
- cub1=\ED,
- cud1=\EB,
- cuf1=\EC,
- cup=\EY%p1%' '%+%c%p2%' '%+%c,
- cuu1=\EA,
- ed=\EJ,
- el=\EK,
- home=\EH,
- ht=^I,
- ind=^J,
- kbs=^H,
- kcub1=\ED,
- kcud1=\EB,
- kcuf1=\EC,
- kcuu1=\EA,
- nel=^M^J,
- ri=\EI,
- rmacs=\EG,
- smacs=\EF,
-#
-# kf30-kf45 are keysyms XK_R1 through XK_R15 on the Sun keyboard.
-xterm-sun|xterm with sun function keys,
- kb2=\E[218z,
- kcpy=\E[197z,
- kcub1=\EOD,
- kcud1=\EOB,
- kcuf1=\EOC,
- kcuu1=\EOA,
- kdch1=\177,
- kend=\E[220z,
- kent=\EOM,
- kf1=\E[224z,
- kf10=\E[233z,
- kf11=\E[192z,
- kf12=\E[193z,
- kf13=\E[194z,
- kf14=\E[195z,
- kf15=\E[196z,
- kf17=\E[198z,
- kf18=\E[199z,
- kf19=\E[200z,
- kf2=\E[225z,
- kf20=\E[201z,
- kf3=\E[226z,
- kf31=\E[208z,
- kf32=\E[209z,
- kf33=\E[210z,
- kf34=\E[211z,
- kf35=\E[212z,
- kf36=\E[213z,
- kf38=\E[215z,
- kf4=\E[227z,
- kf40=\E[217z,
- kf42=\E[219z,
- kf44=\E[221z,
- kf5=\E[228z,
- kf6=\E[229z,
- kf7=\E[230z,
- kf8=\E[231z,
- kf9=\E[232z,
- kfnd=\E[200z,
- khlp=\E[196z,
- khome=\E[214z,
- kich1=\E[2z,
- kmous=\E[M,
- knp=\E[222z,
- kpp=\E[216z,
- kund=\E[195z,
- use=xterm-basic,
-#
-xterm-hp|xterm with hpterm function keys,
- kclr=\EJ,
- kcub1=\ED,
- kcud1=\EB,
- kcuf1=\EC,
- kcuu1=\EA,
- kdch1=\EP,
- kend=\EF,
- kf1=\Ep,
- kf2=\Eq,
- kf3=\Er,
- kf4=\Es,
- kf5=\Et,
- kf6=\Eu,
- kf7=\Ev,
- kf8=\Ew,
- khome=\Eh,
- kich1=\EQ,
- knp=\ES,
- kpp=\ET,
- use=xterm-basic,
-xterm-sco|xterm with SCO function keys,
- kcub1=\E[D,
- kcud1=\E[B,
- kcuf1=\E[C,
- kcuu1=\E[A,
- kend=\E[F,
- kf1=\E[M,
- kf10=\E[V,
- kf11=\E[W,
- kf12=\E[X,
- kf13=\E[Y,
- kf15=\E[a,
- kf16=\E[b,
- kf17=\E[c,
- kf18=\E[d,
- kf19=\E[e,
- kf2=\E[N,
- kf20=\E[f,
- kf21=\E[g,
- kf22=\E[h,
- kf23=\E[i,
- kf24=\E[j,
- kf25=\E[k,
- kf26=\E[l,
- kf27=\E[m,
- kf28=\E[n,
- kf29=\E[o,
- kf3=\E[O,
- kf30=\E[p,
- kf31=\E[q,
- kf32=\E[r,
- kf33=\E[s,
- kf34=\E[t,
- kf35=\E[u,
- kf4=\E[P,
- kf5=\E[Q,
- kf6=\E[R,
- kf7=\E[S,
- kf8=\E[T,
- kf9=\E[U,
- khome=\E[H,
- kich1=\E[L,
- knp=\E[G,
- kpp=\E[I,
- use=xterm-basic,
-#
-# Other variants:
-xterm-24|xterms|vs100|xterm terminal emulator (X Window System),
- lines#24,
- use=xterm,
-xterm-65|xterm with tall window 65x80 (X Window System),
- lines#65,
- use=xterm,
-xterm-bold|xterm with bold instead of underline (X Window System),
- smso=\E[7m,
- smul=\E[1m,
- use=xterm,
-xterm-boldso|xterm with bold for standout (X Window System),
- rmso=\E[m,
- smso=\E[1m,
- use=xterm,
-xterm-mono|monochrome xterm,
- bce@,
- colors@,
- ncv@,
- pairs@,
- op@,
- setab@,
- setaf@,
- setb@,
- setf@,
- sgr@,
- use=xterm,
-#
-# VTxxx terminals are usually set up so that full-screen applications will use
-# the cursor application mode strings. This is good for full-screen
-# applications, including legacy applications which may have hard-coded
-# behavior, but bad for interactive shells (e.g., tcsh, bash) which use arrow
-# keys to scroll through a history of command strings.
-#
-# To see the difference between normal/application modes, consider this example:
-# + In normal (non-application) mode, the terminal transmits a down-arrow
-# as \E[C, which happens to echo as a down-arrow.
-# + In application mode the terminal transmits \EOC, which echoes as C.
-# That is because the \EO is the SS3 control, which says to use the
-# character from the G3 character set for the next cell.
-#
-# One example of hard-coded behavior would be for applications written to work
-# with VT52 and VT100 terminals. If the application's parser ignores 'O' and
-# '?' characters after the escape, then the cursor and keypad strings for the
-# two terminals are the same. (Indeed, one of the first curses applications
-# which I used did something like this to cover "ANSI" terminals -TD).
-#
-# To make this work (leaving the cursor keys in normal mode), we have to adjust
-# the terminal initialization sequences:
-#
-# smkx/rmkx set/reset the cursor and keypad application modes. We retain
-# the latter (otherwise many applications fail).
-#
-# smcup/rmcup set/restore cursor-addressing mode for full-screen
-# applications. For xterm, this normally means the alternate
-# screen, which is not compatible with interactive shells. Some
-# programs are "smart" and disable these.
-#
-xterm-noapp|xterm with cursor keys in normal mode,
- kcub1=\E[D,
- kcud1=\E[B,
- kcuf1=\E[C,
- kcuu1=\E[A,
- rmcup@,
- rmkx=\E>,
- smcup@,
- smkx=\E=,
- use=xterm,
-#
-# This should work for the commonly used "color xterm" variations (XFree86
-# xterm, color_xterm, nxterm, rxvt). Note that it does not set 'bce', so for
-# XFree86 and and rxvt, some applications that use colors will be less
-# efficient, and in a few special cases (with "smart" optimization) the wrong
-# color will be painted in spots.
-xterm-color|generic "ANSI" color xterm (X Window System),
- colors#8,
- ncv@,
- pairs#64,
- op=\E[m,
- setab=\E[4%p1%dm,
- setaf=\E[3%p1%dm,
- use=xterm-r6,
-#
-# vi may work better with this entry, because vi
-# doesn't use insert mode much
-xterm-ic|xterm-vi|xterm with insert character instead of insert mode,
- mir@,
- ich=\E[%p1%d@,
- ich1=\E[@,
- rmir@,
- smir@,
- use=xterm,
-#
-# This is used only for testing (it's not relevant to DEC VTxxx terminals, but
-# to ncurses).
-xterm-xmc|xterm with magic-cookie glitch,
- xmc#1,
- use=xterm-new,
-#
-# This one also is primarily for testing ncurses; while the ISO 6429 defines
-# the REP control, none of the DEC VTxxx terminals (VT52 through VT420) support
-# it.
-xterm-rep|xterm with repeat-character control,
- rep=%p1%c\E[%p2%{1}%-%db,
- use=xterm-new,
-#
-# This is mainly for testing xterm; the real VT220 will not let you switch
-# character sets without first altering the keyboard language in the setup
-# screen. Some emulators allow this anyway. (Note that these strings are
-# normally used only for printers). The parameter to csnm and scs is the same
-# in both cases: the keyboard language parameter returned by CSI ? 2 6 n.
-xterm-nrc|xterm with VT220 national replacement character sets,
- csnm=%?%p1%{1}%=%tNorth American%e%p1%{2}%=%tBritish%e%p1%{3}%=%tFlemish%e%p1%{4}%=%tFrench Canadian%e%p1%{5}%=%tDanish%e%p1%{6}%=%tFinnish%e%p1%{7}%=%tGerman%e%p1%{8}%=%tDutch%e%p1%{9}%=%tItalian%e%p1%{10}%=%tSwiss (French)%e%p1%{11}%=%tSwiss (German)%e%p1%{12}%=%tSwedish%e%p1%{13}%=%tNorwegian%e%p1%{14}%=%tFrench/Belgian%e%p1%{15}%=%tSpanish%;,
- scs=%?%p1%{1}%=%t\E(B%e%p1%{2}%=%t\E(A%e%p1%{3}%=%t\E(R%e%p1%{4}%=%t\E(9%e%p1%{5}%=%t\E(E%e%p1%{6}%=%t\E(5%e%p1%{7}%=%t\E(K%e%p1%{8}%=%t\E(4%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(=%e%p1%{11}%=%t\E(=%e%p1%{12}%=%t\E(7%e%p1%{13}%=%t\E(E%e%p1%{14}%=%t\E(R%e%p1%{15}%=%t\E(Z%;,
- use=xterm-new,
-#
-# Foreground 0-15 maps (with toggles) into 30-37 & 90-97
-# Background 0-15 maps (with toggles) into 40-47 & 100-107
-#
-# Originally I suppressed setaf/setab, since ANSI specifies only 8 colors, but
-# Stephen Marley persuaded me to allow the "ANSI" color controls to extend to
-# 16 colors. (Note that ncurses 4.2 uses setf/setb from this description;
-# however 5.0 selects either according to their availability). - T.Dickey
-#
-# SVr4 curses does not use more than 8 colors anyway, so using 16 colors is
-# either for terminfo-level applications or via ncurses.
-xterm-16color|xterm with 16 colors,
- colors#16,
- ncv#32,
- pairs#256,
- setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
- setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
- setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
- setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
- use=xterm-new,
-#
-# This uses RGB values 0..1000
-#
-# 256 colors should give 65536 pairs, but terminfo stores numbers in a signed
-# short. Most people will not notice problems with only 32767 pairs.
-xterm-256color|xterm with 256 colors,
- ccc,
- colors#256,
- pairs#32767,
- initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
- setab=\E[48;5;%p1%dm,
- setaf=\E[38;5;%p1%dm,
- setb=\E[48;5;%p1%dm,
- setf=\E[38;5;%p1%dm,
- use=xterm-new,
-xterm-88color|xterm with 88 colors,
- colors#88,
- pairs#7744,
- use=xterm-256color,
-#
-# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
-# To use it, your decTerminalID resource must be set to 200 or above, and the
-# sunKeyboard resource set to true.
-#
-# HTS \E H \210
-# RI \E M \215
-# SS3 \E O \217
-# CSI \E [ \233
-#
-xterm-8bit|xterm terminal emulator with 8-bit controls (X Window System),
- am,
- bce,
- km,
- mc5i,
- mir,
- msgr,
- npc,
- xenl,
- colors#8,
- cols#80,
- it#8,
- lines#24,
- pairs#64,
- acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G,
- blink=\2335m,
- bold=\2331m,
- cbt=\233Z,
- civis=\233?25l,
- clear=\233H\2332J,
- cnorm=\233?25l\233?25h,
- cr=^M,
- csr=\233%i%p1%d;%p2%dr,
- cub=\233%p1%dD,
- cub1=^H,
- cud=\233%p1%dB,
- cud1=^J,
- cuf=\233%p1%dC,
- cuf1=\233C,
- cup=\233%i%p1%d;%p2%dH,
- cuu=\233%p1%dA,
- cuu1=\233A,
- cvvis=\233?12;25h,
- dch=\233%p1%dP,
- dch1=\233P,
- dl=\233%p1%dM,
- dl1=\233M,
- ech=\233%p1%dX,
- ed=\233J,
- el=\233K,
- el1=\2331K,
- flash=\233?5h$<100/>\233?5l,
- home=\233H,
- hpa=\233%i%p1%dG,
- ht=^I,
- hts=\210,
- ich=\233%p1%d@,
- il=\233%p1%dL,
- il1=\233L,
- ind=^J,
- invis=\2338m,
- is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
- ka1=\217w,
- ka3=\217u,
- kb2=\217y,
- kbeg=\217E,
- kbs=^H,
- kc1=\217q,
- kc3=\217s,
- kcbt=\233Z,
- kcub1=\217D,
- kcud1=\217B,
- kcuf1=\217C,
- kcuu1=\217A,
- kdch1=\2333~,
- kend=\2334~,
- kent=\217M,
- kf1=\23311~,
- kf10=\23321~,
- kf11=\23323~,
- kf12=\23324~,
- kf13=\23325~,
- kf14=\23326~,
- kf15=\23328~,
- kf16=\23329~,
- kf17=\23331~,
- kf18=\23332~,
- kf19=\23333~,
- kf2=\23312~,
- kf20=\23334~,
- kf3=\23313~,
- kf4=\23314~,
- kf5=\23315~,
- kf6=\23317~,
- kf7=\23318~,
- kf8=\23319~,
- kf9=\23320~,
- khome=\2331~,
- kich1=\2332~,
- kmous=\233M,
- knp=\2336~,
- kpp=\2335~,
- mc0=\233i,
- mc4=\2334i,
- mc5=\2335i,
- meml=\El,
- memu=\Em,
- op=\23339;49m,
- rc=\E8,
- rev=\2337m,
- ri=\215,
- rmacs=\E(B,
- rmam=\233?7l,
- rmcup=\233?1049l,
- rmir=\2334l,
- rmkx=\233?1l\E>,
- rmso=\23327m,
- rmul=\23324m,
- rs1=\Ec,
- rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
- sc=\E7,
- setab=\2334%p1%dm,
- setaf=\2333%p1%dm,
- setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
- sgr0=\233m\E(B,
- smacs=\E(0,
- smam=\233?7h,
- smcup=\233?1049h,
- smir=\2334h,
- smkx=\233?1h\E=,
- smso=\2337m,
- smul=\2334m,
- tbc=\2333g,
- u6=\233[%i%d;%dR,
- u7=\E[6n,
- u8=\233[?1;2c,
- u9=\E[c,
- vpa=\233%i%p1%dd,
-#
-# Compatible with the R6 xterm, with the following changes:
-# + added acsc (perhaps some versions of tic assume the standard vt100
-# alternate character set)
-# + added u6, u7, u8, u9 strings for Daniel Weaver's tack program.
-# + added kmous string for ncurses.
-# + added khome/kend strings (which conflict with kfnd/kslt, see note).
-xterm-r6|xterm-old|xterm X11R6 version,
- am,
- km,
- mir,
- msgr,
- xenl,
- cols#80,
- it#8,
- lines#24,
- acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G,
- blink@,
- bold=\E[1m,
- clear=\E[H\E[2J,
- cr=^M,
- csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD,
- cub1=^H,
- cud=\E[%p1%dB,
- cud1=^J,
- cuf=\E[%p1%dC,
- cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA,
- cuu1=\E[A,
- dch=\E[%p1%dP,
- dch1=\E[P,
- dl=\E[%p1%dM,
- dl1=\E[M,
- ed=\E[J,
- el=\E[K,
- enacs=\E)0,
- home=\E[H,
- ht=^I,
- il=\E[%p1%dL,
- il1=\E[L,
- ind=^J,
- is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
- kbs=^H,
- kcub1=\EOD,
- kcud1=\EOB,
- kcuf1=\EOC,
- kcuu1=\EOA,
- kdch1=\177,
- kend=\E[4~,
- kf1=\E[11~,
- kf10=\E[21~,
- kf11=\E[23~,
- kf12=\E[24~,
- kf13=\E[25~,
- kf14=\E[26~,
- kf15=\E[28~,
- kf16=\E[29~,
- kf17=\E[31~,
- kf18=\E[32~,
- kf19=\E[33~,
- kf2=\E[12~,
- kf20=\E[34~,
- kf3=\E[13~,
- kf4=\E[14~,
- kf5=\E[15~,
- kf6=\E[17~,
- kf7=\E[18~,
- kf8=\E[19~,
- kf9=\E[20~,
- khome=\E[1~,
- kich1=\E[2~,
- kmous=\E[M,
- knp=\E[6~,
- kpp=\E[5~,
- meml=\El,
- memu=\Em,
- rc=\E8,
- rev=\E[7m,
- ri=\EM,
- rmacs=^O,
- rmcup=\E[2J\E[?47l\E8,
- rmir=\E[4l,
- rmkx=\E[?1l\E>,
- rmso=\E[m,
- rmul=\E[m,
- rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
- sc=\E7,
- sgr0=\E[m,
- smacs=^N,
- smcup=\E7\E[?47h,
- smir=\E[4h,
- smkx=\E[?1h\E=,
- smso=\E[7m,
- smul=\E[4m,
- tbc=\E[3g,
- u6=\E[%i%d;%dR,
- u7=\E[6n,
- u8=\E[?1;2c,
- u9=\E[c,
-#
-# Compatible with the R5 xterm, with the following changes:
-# + changed 'blink=@', to 'blink@' (the former meant that "@" would start
-# a blink, the latter that it is not supported).
-# + changed kf1 through kf4 to correspond with actual usage. Though X
-# supports keypad symbols for PF1 to PF4, and xterm interprets these
-# correctly, the F1 to F4 codes are commonly (but incorrectly) used.
-# + moved reset string from rs1 to rs2, to correlate better with termcap.
-# + make khome consistent with other entries.
-# + use rmul/smul, rmir/smir from termcap, but not rmcup/smcup because
-# not everyone wants the alternate screen.
-# + added u6, u7, u8, u9 strings for Daniel Weaver's tack program.
-# + added kmous string for ncurses.
-xterm-r5|xterm R5 version,
- am,
- km,
- msgr,
- xenl,
- cols#80,
- it#8,
- lines#24,
- bel=^G,
- blink@,
- bold=\E[1m,
- clear=\E[H\E[2J,
- cr=^M,
- csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD,
- cub1=^H,
- cud=\E[%p1%dB,
- cud1=^J,
- cuf=\E[%p1%dC,
- cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA,
- cuu1=\E[A,
- dch=\E[%p1%dP,
- dch1=\E[P,
- dl=\E[%p1%dM,
- dl1=\E[M,
- ed=\E[J,
- el=\E[K,
- home=\E[H,
- ht=^I,
- hts=\EH,
- ich=\E[%p1%d@,
- ich1=\E[@,
- il=\E[%p1%dL,
- il1=\E[L,
- ind=^J,
- kbs=^H,
- kcub1=\EOD,
- kcud1=\EOB,
- kcuf1=\EOC,
- kcuu1=\EOA,
- kdch1=\177,
- kdl1=\E[31~,
- kel=\E[8~,
- kend=\E[4~,
- kf0=\EOq,
- kf1=\E[11~,
- kf10=\E[21~,
- kf11=\E[23~,
- kf12=\E[24~,
- kf2=\E[12~,
- kf3=\E[13~,
- kf4=\E[14~,
- kf5=\E[15~,
- kf6=\E[17~,
- kf7=\E[18~,
- kf8=\E[19~,
- kf9=\E[20~,
- khome=\E[1~,
- kich1=\E[2~,
- kil1=\E[30~,
- kmous=\E[M,
- knp=\E[6~,
- kpp=\E[5~,
- rc=\E8,
- rev=\E[7m,
- ri=\EM,
- rmir=\E[4l,
- rmkx=\E[?1l\E>,
- rmso=\E[m,
- rmul=\E[m,
- rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
- sc=\E7,
- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
- sgr0=\E[m,
- smir=\E[4h,
- smkx=\E[?1h\E=,
- smso=\E[7m,
- smul=\E[4m,
- tbc=\E[3g,
- u6=\E[%i%d;%dR,
- u7=\E[6n,
- u8=\E[?1;2c,
- u9=\E[c,
-#
-# Customization begins here.
-xterm-xfree86|xterm terminal emulator (XFree86),
- use=xterm-new,
-#
-# This is the only entry which you should have to customize, since "xterm"
-# is widely used for a variety of incompatible terminal emulations including
-# color_xterm and rxvt.
-xterm|X11 terminal emulator,
- use=xterm-new,
-# use=xterm-r6,