diff options
Diffstat (limited to 'nx-X11/programs/xterm/terminfo')
| -rw-r--r-- | nx-X11/programs/xterm/terminfo | 1012 |
1 files changed, 0 insertions, 1012 deletions
diff --git a/nx-X11/programs/xterm/terminfo b/nx-X11/programs/xterm/terminfo deleted file mode 100644 index f0b5f4d3a..000000000 --- a/nx-X11/programs/xterm/terminfo +++ /dev/null @@ -1,1012 +0,0 @@ -# $XTermId: terminfo,v 1.111 2005/11/03 13:17:28 tom Exp $ -# -# $Xorg: terminfo,v 1.3 2000/08/17 19:55:10 cpqbld Exp $ -# -# meml locks memory above the cursor; memu unlocks (ala HP terminals) -# -# XFree86 updates/notes/new entries (including xterm-8bit, xterm-16color) -# - Thomas E. Dickey -# -# $XFree86: xc/programs/xterm/terminfo,v 3.57 2005/11/03 13:17:28 dickey Exp $ -# -# Special Capabilities: -# -------------------- -# ich has a corresponding capability that inserts a single blank. We could -# have used ich1=\E[@, which works with ncurses, but that is not standard -# behavior. If it is set, then SVr4 vi (e.g., Solaris 2.6) emits both -# smir/rmir and ich1. -# meml locks memory above the cursor; memu unlocks (ala HP terminals). This -# is not recognized by some older (e.g., SVr3) tic programs, but none -# do more than warn about it. Ignore the warning. -# smcup clears memory before switching to the alternate screen. The older -# (deprecated) \E[?47h did not do this, requiring applications to -# embed a \E[2J in the rmcup string. However, that behavior cannot -# be disabled via titeInhibit, making that resource not function as -# intended on systems with terminfo. -# rs2/is2 are shorter with XFree86 xterm because it supports DECSTR. We -# use the shorter sequence for compatibility with the termcap, which -# is trimmed to keep it shorter than 1023 characters. It (escape \E[!p) -# replaces these in the conventional vt100 reset-string: -# \E7 - save cursor (fixes origin-mode side-effect) -# \E[r - reset scrolling margins -# \E[m - reset SGR (including color) -# \E[?7h - reset wraparound mode (DECAWM) -# \E[?1l - reset application cursor keys (DECCKM) -# \E[?6l - reset origin mode (DECOM) -# \E8 - restore cursor -# DECSTR is recognized by XFree86 xterm even in vt52 mode. -# -# Editing Keypad: -# -------------- -# XFree86 xterm emulates vt220 if the decTerminalID resource is set to 200 or -# higher. Otherwise it emulates a vt100 or vt52 depending on the value of the -# resource. When emulating a vt220, we support the editing keypad. Sun and PC -# keyboards have an editing keypad which is similar to the vt220: -# -# VT220 editing keypad -# ---------------------------- -# Find Insert Remove -# Select Prev Next -# ---------------------------- -# -# Sun/PC editing keypad -# ---------------------------- -# Insert Home PageUp -# Delete End PageDn -# ---------------------------- -# -# If the sunKeyboard resource is true, we map it this way (adjusting the values -# of Home, End and Delete): -# VT220 Sun/PC -# ---------------------------- -# Find Home -# Select End -# Insert Insert -# Remove Delete -# Prev PageUp -# Next PageDn -# ---------------------------- -# -# Note that all of the keys on the editing keypad transmit escape sequences. A -# vt220 does this only when in vt220 mode; when emulating a vt100 the editing -# keypad is inactive. -# -# Alternative keycodes: -# -------------------- -# Several of the function keys have alternative names, depending on the type of -# host which your xterm is connected to. DEC (i.e., the VMS system) uses F15 -# as the HELP key, F16 as the DO key. Unix applications generally do not do -# this. Curses applications in particular, assign a unique keycode to each -# capability string. These terminal descriptions do not have conflicting -# definitions, to ensure that Unix curses applications use a consistent set of -# keycodes. To get a VMS-bias, make these substitutions: -# 1. change khome to kfnd -# 2. change kend to kslt -# The original xterm-r6 entry does in fact have a VMS bias. -# -# Some legacy applications using the termcap emulation may expect kll where -# we have specified kend. -# -# Function keys with modifiers (Sun/PC): -# ------------------------------------- -# Shift-Fx - kf{12+x} -# Control-Fx - kf{24+x} -# Shift-Control-Fx - kf{36+x} -# -# The terminfo defines some special keys which are documented as "shifted", -# e.g., kDC is shifted-delete-character. -# -# Note however, that even though the terminfo says a key might be sent, there -# may be conflicts which prevent this. For example, it is common to use -# shifted pageup and pagedown for window manager functions. The default -# translation for xterm since X11R4 has overridden shifted Insert, Select, -# PageUp and PageDown, which correspond to terminfo kIC, kEND, kPRV and kNXT -# respectively. -# -xterm-new|modern xterm terminal emulator, - npc, - indn=\E[%p1%dS, - kDC=\E[3;2~, - kEND=\E[1;2F, - kHOM=\E[1;2H, - kIC=\E[2;2~, - kLFT=\E[1;2D, - kNXT=\E[6;2~, - kPRV=\E[5;2~, - kRIT=\E[1;2C, - kb2=\EOE, - kcbt=\E[Z, - kcub1=\EOD, - kcud1=\EOB, - kcuf1=\EOC, - kcuu1=\EOA, - kend=\EOF, - kent=\EOM, - khome=\EOH, - kich1=\E[2~, - kind=\E[1;2B, - kmous=\E[M, - knp=\E[6~, - kpp=\E[5~, - kri=\E[1;2A, - rin=\E[%p1%dT, - use=xterm+pcfkeys, - use=xterm-basic, -# Encode modifiers using parameters (see ctlseqs.msg). -# Note that this is unrelated to PCTERM. -# -# Some names are extensions allowed by ncurses: -# kDN, kDN5, kDN6, kLFT5, kLFT6, kRIT5, kRIT6, kUP, kUP5, kUP6 -xterm+pcfkeys|fragment for PC-style keys, - kf1=\EOP, - kf10=\E[21~, - kf11=\E[23~, - kf12=\E[24~, - kf13=\EO2P, - kf14=\EO2Q, - kf15=\EO2R, - kf16=\EO2S, - kf17=\E[15;2~, - kf18=\E[17;2~, - kf19=\E[18;2~, - kf2=\EOQ, - kf20=\E[19;2~, - kf21=\E[20;2~, - kf22=\E[21;2~, - kf23=\E[23;2~, - kf24=\E[24;2~, - kf25=\EO5P, - kf26=\EO5Q, - kf27=\EO5R, - kf28=\EO5S, - kf29=\E[15;5~, - kf3=\EOR, - kf30=\E[17;5~, - kf31=\E[18;5~, - kf32=\E[19;5~, - kf33=\E[20;5~, - kf34=\E[21;5~, - kf35=\E[23;5~, - kf36=\E[24;5~, - kf37=\EO6P, - kf38=\EO6Q, - kf39=\EO6R, - kf4=\EOS, - kf40=\EO6S, - kf41=\E[15;6~, - kf42=\E[17;6~, - kf43=\E[18;6~, - kf44=\E[19;6~, - kf45=\E[20;6~, - kf46=\E[21;6~, - kf47=\E[23;6~, - kf48=\E[24;6~, - kf49=\EO3P, - kf5=\E[15~, - kf50=\EO3Q, - kf51=\EO3R, - kf52=\EO3S, - kf53=\E[15;3~, - kf54=\E[17;3~, - kf55=\E[18;3~, - kf56=\E[19;3~, - kf57=\E[20;3~, - kf58=\E[21;3~, - kf59=\E[23;3~, - kf6=\E[17~, - kf60=\E[24;3~, - kf61=\EO4P, - kf62=\EO4Q, - kf63=\EO4R, - kf7=\E[18~, - kf8=\E[19~, - kf9=\E[20~, - kDN=\E[1;2B, - kDN5=\E[1;5B, - kDN6=\E[1;6B, - kLFT5=\E[1;5D, - kLFT6=\E[1;6D, - kRIT5=\E[1;5C, - kRIT6=\E[1;6C, - kUP=\E[1;2A, - kUP5=\E[1;5A, - kUP6=\E[1;6A, -# -# This chunk is used for building the VT220/Sun/PC keyboard variants. -xterm-basic|modern xterm terminal emulator - common, - am, - bce, - km, - mc5i, - mir, - msgr, - xenl, - colors#8, - cols#80, - it#8, - lines#24, - pairs#64, - acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, - blink=\E[5m, - bold=\E[1m, - cbt=\E[Z, - civis=\E[?25l, - clear=\E[H\E[2J, - cnorm=\E[?12l\E[?25h, - cr=^M, - csr=\E[%i%p1%d;%p2%dr, - cub=\E[%p1%dD, - cub1=^H, - cud=\E[%p1%dB, - cud1=^J, - cuf=\E[%p1%dC, - cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, - cuu=\E[%p1%dA, - cuu1=\E[A, - cvvis=\E[?12;25h, - dch=\E[%p1%dP, - dch1=\E[P, - dl=\E[%p1%dM, - dl1=\E[M, - ech=\E[%p1%dX, - ed=\E[J, - el=\E[K, - el1=\E[1K, - flash=\E[?5h$<100/>\E[?5l, - home=\E[H, - hpa=\E[%i%p1%dG, - ht=^I, - hts=\EH, - ich=\E[%p1%d@, - il=\E[%p1%dL, - il1=\E[L, - ind=^J, - invis=\E[8m, - is2=\E[!p\E[?3;4l\E[4l\E>, - kbs=^H, - kdch1=\E[3~, - mc0=\E[i, - mc4=\E[4i, - mc5=\E[5i, - meml=\El, - memu=\Em, - op=\E[39;49m, - rc=\E8, - rev=\E[7m, - ri=\EM, - rmacs=\E(B, - rmam=\E[?7l, - rmcup=\E[?1049l, - rmir=\E[4l, - rmkx=\E[?1l\E>, - rmso=\E[27m, - rmul=\E[24m, - rs1=\Ec, - rs2=\E[!p\E[?3;4l\E[4l\E>, - sc=\E7, - setab=\E[4%p1%dm, - setaf=\E[3%p1%dm, - setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, - setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, - sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, - sgr0=\E[m\E(B, - smacs=\E(0, - smam=\E[?7h, - smcup=\E[?1049h, - smir=\E[4h, - smkx=\E[?1h\E=, - smso=\E[7m, - smul=\E[4m, - tbc=\E[3g, - u6=\E[%i%d;%dR, - u7=\E[6n, - u8=\E[?1;2c, - u9=\E[c, - vpa=\E[%i%p1%dd, -# -# The xterm-new description has all of the features, but is not completely -# compatible with vt220. If you are using a Sun or PC keyboard, set the -# sunKeyboard resource to true: -# + maps the editing keypad -# + interprets control-function-key as a second array of keys, so a -# 12-fkey keyboard can support vt220's 20-fkeys. -# + maps numeric keypad "+" to ",". -# + uses DEC-style control sequences for the application keypad. -# -# Some packagers modify xterm's resource definitions to provide extra function -# keys by using the shift-modifier in the translations resource. However, that -# interferes with the DECUDK functionality. -# -xterm-vt220|xterm emulating vt220, - ka1=\EOw, - ka3=\EOy, - kb2=\EOu, - kc1=\EOq, - kc3=\EOs, - kcbt=\E[Z, - kcub1=\EOD, - kcud1=\EOB, - kcuf1=\EOC, - kcuu1=\EOA, - kend=\E[4~, - kent=\EOM, - kf1=\EOP, - kf10=\E[21~, - kf11=\E[23~, - kf12=\E[24~, - kf13=\E[25~, - kf14=\E[26~, - kf15=\E[28~, - kf16=\E[29~, - kf17=\E[31~, - kf18=\E[32~, - kf19=\E[33~, - kf2=\EOQ, - kf20=\E[34~, - kf3=\EOR, - kf4=\EOS, - kf5=\E[15~, - kf6=\E[17~, - kf7=\E[18~, - kf8=\E[19~, - kf9=\E[20~, - khome=\E[1~, - kich1=\E[2~, - kmous=\E[M, - knp=\E[6~, - kpp=\E[5~, - use=xterm-basic, -# -xterm-vt52|xterm emulating dec vt52, - cols#80, - it#8, - lines#24, - acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, - clear=\EH\EJ, - cr=^M, - cub1=\ED, - cud1=\EB, - cuf1=\EC, - cup=\EY%p1%' '%+%c%p2%' '%+%c, - cuu1=\EA, - ed=\EJ, - el=\EK, - home=\EH, - ht=^I, - ind=^J, - kbs=^H, - kcub1=\ED, - kcud1=\EB, - kcuf1=\EC, - kcuu1=\EA, - nel=^M^J, - ri=\EI, - rmacs=\EG, - smacs=\EF, -# -# kf30-kf45 are keysyms XK_R1 through XK_R15 on the Sun keyboard. -xterm-sun|xterm with sun function keys, - kb2=\E[218z, - kcpy=\E[197z, - kcub1=\EOD, - kcud1=\EOB, - kcuf1=\EOC, - kcuu1=\EOA, - kdch1=\177, - kend=\E[220z, - kent=\EOM, - kf1=\E[224z, - kf10=\E[233z, - kf11=\E[192z, - kf12=\E[193z, - kf13=\E[194z, - kf14=\E[195z, - kf15=\E[196z, - kf17=\E[198z, - kf18=\E[199z, - kf19=\E[200z, - kf2=\E[225z, - kf20=\E[201z, - kf3=\E[226z, - kf31=\E[208z, - kf32=\E[209z, - kf33=\E[210z, - kf34=\E[211z, - kf35=\E[212z, - kf36=\E[213z, - kf38=\E[215z, - kf4=\E[227z, - kf40=\E[217z, - kf42=\E[219z, - kf44=\E[221z, - kf5=\E[228z, - kf6=\E[229z, - kf7=\E[230z, - kf8=\E[231z, - kf9=\E[232z, - kfnd=\E[200z, - khlp=\E[196z, - khome=\E[214z, - kich1=\E[2z, - kmous=\E[M, - knp=\E[222z, - kpp=\E[216z, - kund=\E[195z, - use=xterm-basic, -# -xterm-hp|xterm with hpterm function keys, - kclr=\EJ, - kcub1=\ED, - kcud1=\EB, - kcuf1=\EC, - kcuu1=\EA, - kdch1=\EP, - kend=\EF, - kf1=\Ep, - kf2=\Eq, - kf3=\Er, - kf4=\Es, - kf5=\Et, - kf6=\Eu, - kf7=\Ev, - kf8=\Ew, - khome=\Eh, - kich1=\EQ, - knp=\ES, - kpp=\ET, - use=xterm-basic, -xterm-sco|xterm with SCO function keys, - kcub1=\E[D, - kcud1=\E[B, - kcuf1=\E[C, - kcuu1=\E[A, - kend=\E[F, - kf1=\E[M, - kf10=\E[V, - kf11=\E[W, - kf12=\E[X, - kf13=\E[Y, - kf15=\E[a, - kf16=\E[b, - kf17=\E[c, - kf18=\E[d, - kf19=\E[e, - kf2=\E[N, - kf20=\E[f, - kf21=\E[g, - kf22=\E[h, - kf23=\E[i, - kf24=\E[j, - kf25=\E[k, - kf26=\E[l, - kf27=\E[m, - kf28=\E[n, - kf29=\E[o, - kf3=\E[O, - kf30=\E[p, - kf31=\E[q, - kf32=\E[r, - kf33=\E[s, - kf34=\E[t, - kf35=\E[u, - kf4=\E[P, - kf5=\E[Q, - kf6=\E[R, - kf7=\E[S, - kf8=\E[T, - kf9=\E[U, - khome=\E[H, - kich1=\E[L, - knp=\E[G, - kpp=\E[I, - use=xterm-basic, -# -# Other variants: -xterm-24|xterms|vs100|xterm terminal emulator (X Window System), - lines#24, - use=xterm, -xterm-65|xterm with tall window 65x80 (X Window System), - lines#65, - use=xterm, -xterm-bold|xterm with bold instead of underline (X Window System), - smso=\E[7m, - smul=\E[1m, - use=xterm, -xterm-boldso|xterm with bold for standout (X Window System), - rmso=\E[m, - smso=\E[1m, - use=xterm, -xterm-mono|monochrome xterm, - bce@, - colors@, - ncv@, - pairs@, - op@, - setab@, - setaf@, - setb@, - setf@, - sgr@, - use=xterm, -# -# VTxxx terminals are usually set up so that full-screen applications will use -# the cursor application mode strings. This is good for full-screen -# applications, including legacy applications which may have hard-coded -# behavior, but bad for interactive shells (e.g., tcsh, bash) which use arrow -# keys to scroll through a history of command strings. -# -# To see the difference between normal/application modes, consider this example: -# + In normal (non-application) mode, the terminal transmits a down-arrow -# as \E[C, which happens to echo as a down-arrow. -# + In application mode the terminal transmits \EOC, which echoes as C. -# That is because the \EO is the SS3 control, which says to use the -# character from the G3 character set for the next cell. -# -# One example of hard-coded behavior would be for applications written to work -# with VT52 and VT100 terminals. If the application's parser ignores 'O' and -# '?' characters after the escape, then the cursor and keypad strings for the -# two terminals are the same. (Indeed, one of the first curses applications -# which I used did something like this to cover "ANSI" terminals -TD). -# -# To make this work (leaving the cursor keys in normal mode), we have to adjust -# the terminal initialization sequences: -# -# smkx/rmkx set/reset the cursor and keypad application modes. We retain -# the latter (otherwise many applications fail). -# -# smcup/rmcup set/restore cursor-addressing mode for full-screen -# applications. For xterm, this normally means the alternate -# screen, which is not compatible with interactive shells. Some -# programs are "smart" and disable these. -# -xterm-noapp|xterm with cursor keys in normal mode, - kcub1=\E[D, - kcud1=\E[B, - kcuf1=\E[C, - kcuu1=\E[A, - rmcup@, - rmkx=\E>, - smcup@, - smkx=\E=, - use=xterm, -# -# This should work for the commonly used "color xterm" variations (XFree86 -# xterm, color_xterm, nxterm, rxvt). Note that it does not set 'bce', so for -# XFree86 and and rxvt, some applications that use colors will be less -# efficient, and in a few special cases (with "smart" optimization) the wrong -# color will be painted in spots. -xterm-color|generic "ANSI" color xterm (X Window System), - colors#8, - ncv@, - pairs#64, - op=\E[m, - setab=\E[4%p1%dm, - setaf=\E[3%p1%dm, - use=xterm-r6, -# -# vi may work better with this entry, because vi -# doesn't use insert mode much -xterm-ic|xterm-vi|xterm with insert character instead of insert mode, - mir@, - ich=\E[%p1%d@, - ich1=\E[@, - rmir@, - smir@, - use=xterm, -# -# This is used only for testing (it's not relevant to DEC VTxxx terminals, but -# to ncurses). -xterm-xmc|xterm with magic-cookie glitch, - xmc#1, - use=xterm-new, -# -# This one also is primarily for testing ncurses; while the ISO 6429 defines -# the REP control, none of the DEC VTxxx terminals (VT52 through VT420) support -# it. -xterm-rep|xterm with repeat-character control, - rep=%p1%c\E[%p2%{1}%-%db, - use=xterm-new, -# -# This is mainly for testing xterm; the real VT220 will not let you switch -# character sets without first altering the keyboard language in the setup -# screen. Some emulators allow this anyway. (Note that these strings are -# normally used only for printers). The parameter to csnm and scs is the same -# in both cases: the keyboard language parameter returned by CSI ? 2 6 n. -xterm-nrc|xterm with VT220 national replacement character sets, - csnm=%?%p1%{1}%=%tNorth American%e%p1%{2}%=%tBritish%e%p1%{3}%=%tFlemish%e%p1%{4}%=%tFrench Canadian%e%p1%{5}%=%tDanish%e%p1%{6}%=%tFinnish%e%p1%{7}%=%tGerman%e%p1%{8}%=%tDutch%e%p1%{9}%=%tItalian%e%p1%{10}%=%tSwiss (French)%e%p1%{11}%=%tSwiss (German)%e%p1%{12}%=%tSwedish%e%p1%{13}%=%tNorwegian%e%p1%{14}%=%tFrench/Belgian%e%p1%{15}%=%tSpanish%;, - scs=%?%p1%{1}%=%t\E(B%e%p1%{2}%=%t\E(A%e%p1%{3}%=%t\E(R%e%p1%{4}%=%t\E(9%e%p1%{5}%=%t\E(E%e%p1%{6}%=%t\E(5%e%p1%{7}%=%t\E(K%e%p1%{8}%=%t\E(4%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(=%e%p1%{11}%=%t\E(=%e%p1%{12}%=%t\E(7%e%p1%{13}%=%t\E(E%e%p1%{14}%=%t\E(R%e%p1%{15}%=%t\E(Z%;, - use=xterm-new, -# -# Foreground 0-15 maps (with toggles) into 30-37 & 90-97 -# Background 0-15 maps (with toggles) into 40-47 & 100-107 -# -# Originally I suppressed setaf/setab, since ANSI specifies only 8 colors, but -# Stephen Marley persuaded me to allow the "ANSI" color controls to extend to -# 16 colors. (Note that ncurses 4.2 uses setf/setb from this description; -# however 5.0 selects either according to their availability). - T.Dickey -# -# SVr4 curses does not use more than 8 colors anyway, so using 16 colors is -# either for terminfo-level applications or via ncurses. -xterm-16color|xterm with 16 colors, - colors#16, - ncv#32, - pairs#256, - setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm, - setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm, - setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, - setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, - use=xterm-new, -# -# This uses RGB values 0..1000 -# -# 256 colors should give 65536 pairs, but terminfo stores numbers in a signed -# short. Most people will not notice problems with only 32767 pairs. -xterm-256color|xterm with 256 colors, - ccc, - colors#256, - pairs#32767, - initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, - setab=\E[48;5;%p1%dm, - setaf=\E[38;5;%p1%dm, - setb=\E[48;5;%p1%dm, - setf=\E[38;5;%p1%dm, - use=xterm-new, -xterm-88color|xterm with 88 colors, - colors#88, - pairs#7744, - use=xterm-256color, -# -# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color. -# To use it, your decTerminalID resource must be set to 200 or above, and the -# sunKeyboard resource set to true. -# -# HTS \E H \210 -# RI \E M \215 -# SS3 \E O \217 -# CSI \E [ \233 -# -xterm-8bit|xterm terminal emulator with 8-bit controls (X Window System), - am, - bce, - km, - mc5i, - mir, - msgr, - npc, - xenl, - colors#8, - cols#80, - it#8, - lines#24, - pairs#64, - acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, - blink=\2335m, - bold=\2331m, - cbt=\233Z, - civis=\233?25l, - clear=\233H\2332J, - cnorm=\233?25l\233?25h, - cr=^M, - csr=\233%i%p1%d;%p2%dr, - cub=\233%p1%dD, - cub1=^H, - cud=\233%p1%dB, - cud1=^J, - cuf=\233%p1%dC, - cuf1=\233C, - cup=\233%i%p1%d;%p2%dH, - cuu=\233%p1%dA, - cuu1=\233A, - cvvis=\233?12;25h, - dch=\233%p1%dP, - dch1=\233P, - dl=\233%p1%dM, - dl1=\233M, - ech=\233%p1%dX, - ed=\233J, - el=\233K, - el1=\2331K, - flash=\233?5h$<100/>\233?5l, - home=\233H, - hpa=\233%i%p1%dG, - ht=^I, - hts=\210, - ich=\233%p1%d@, - il=\233%p1%dL, - il1=\233L, - ind=^J, - invis=\2338m, - is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8, - ka1=\217w, - ka3=\217u, - kb2=\217y, - kbeg=\217E, - kbs=^H, - kc1=\217q, - kc3=\217s, - kcbt=\233Z, - kcub1=\217D, - kcud1=\217B, - kcuf1=\217C, - kcuu1=\217A, - kdch1=\2333~, - kend=\2334~, - kent=\217M, - kf1=\23311~, - kf10=\23321~, - kf11=\23323~, - kf12=\23324~, - kf13=\23325~, - kf14=\23326~, - kf15=\23328~, - kf16=\23329~, - kf17=\23331~, - kf18=\23332~, - kf19=\23333~, - kf2=\23312~, - kf20=\23334~, - kf3=\23313~, - kf4=\23314~, - kf5=\23315~, - kf6=\23317~, - kf7=\23318~, - kf8=\23319~, - kf9=\23320~, - khome=\2331~, - kich1=\2332~, - kmous=\233M, - knp=\2336~, - kpp=\2335~, - mc0=\233i, - mc4=\2334i, - mc5=\2335i, - meml=\El, - memu=\Em, - op=\23339;49m, - rc=\E8, - rev=\2337m, - ri=\215, - rmacs=\E(B, - rmam=\233?7l, - rmcup=\233?1049l, - rmir=\2334l, - rmkx=\233?1l\E>, - rmso=\23327m, - rmul=\23324m, - rs1=\Ec, - rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8, - sc=\E7, - setab=\2334%p1%dm, - setaf=\2333%p1%dm, - setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, - setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, - sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, - sgr0=\233m\E(B, - smacs=\E(0, - smam=\233?7h, - smcup=\233?1049h, - smir=\2334h, - smkx=\233?1h\E=, - smso=\2337m, - smul=\2334m, - tbc=\2333g, - u6=\233[%i%d;%dR, - u7=\E[6n, - u8=\233[?1;2c, - u9=\E[c, - vpa=\233%i%p1%dd, -# -# Compatible with the R6 xterm, with the following changes: -# + added acsc (perhaps some versions of tic assume the standard vt100 -# alternate character set) -# + added u6, u7, u8, u9 strings for Daniel Weaver's tack program. -# + added kmous string for ncurses. -# + added khome/kend strings (which conflict with kfnd/kslt, see note). -xterm-r6|xterm-old|xterm X11R6 version, - am, - km, - mir, - msgr, - xenl, - cols#80, - it#8, - lines#24, - acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, - bel=^G, - blink@, - bold=\E[1m, - clear=\E[H\E[2J, - cr=^M, - csr=\E[%i%p1%d;%p2%dr, - cub=\E[%p1%dD, - cub1=^H, - cud=\E[%p1%dB, - cud1=^J, - cuf=\E[%p1%dC, - cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, - cuu=\E[%p1%dA, - cuu1=\E[A, - dch=\E[%p1%dP, - dch1=\E[P, - dl=\E[%p1%dM, - dl1=\E[M, - ed=\E[J, - el=\E[K, - enacs=\E)0, - home=\E[H, - ht=^I, - il=\E[%p1%dL, - il1=\E[L, - ind=^J, - is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, - kbs=^H, - kcub1=\EOD, - kcud1=\EOB, - kcuf1=\EOC, - kcuu1=\EOA, - kdch1=\177, - kend=\E[4~, - kf1=\E[11~, - kf10=\E[21~, - kf11=\E[23~, - kf12=\E[24~, - kf13=\E[25~, - kf14=\E[26~, - kf15=\E[28~, - kf16=\E[29~, - kf17=\E[31~, - kf18=\E[32~, - kf19=\E[33~, - kf2=\E[12~, - kf20=\E[34~, - kf3=\E[13~, - kf4=\E[14~, - kf5=\E[15~, - kf6=\E[17~, - kf7=\E[18~, - kf8=\E[19~, - kf9=\E[20~, - khome=\E[1~, - kich1=\E[2~, - kmous=\E[M, - knp=\E[6~, - kpp=\E[5~, - meml=\El, - memu=\Em, - rc=\E8, - rev=\E[7m, - ri=\EM, - rmacs=^O, - rmcup=\E[2J\E[?47l\E8, - rmir=\E[4l, - rmkx=\E[?1l\E>, - rmso=\E[m, - rmul=\E[m, - rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, - sc=\E7, - sgr0=\E[m, - smacs=^N, - smcup=\E7\E[?47h, - smir=\E[4h, - smkx=\E[?1h\E=, - smso=\E[7m, - smul=\E[4m, - tbc=\E[3g, - u6=\E[%i%d;%dR, - u7=\E[6n, - u8=\E[?1;2c, - u9=\E[c, -# -# Compatible with the R5 xterm, with the following changes: -# + changed 'blink=@', to 'blink@' (the former meant that "@" would start -# a blink, the latter that it is not supported). -# + changed kf1 through kf4 to correspond with actual usage. Though X -# supports keypad symbols for PF1 to PF4, and xterm interprets these -# correctly, the F1 to F4 codes are commonly (but incorrectly) used. -# + moved reset string from rs1 to rs2, to correlate better with termcap. -# + make khome consistent with other entries. -# + use rmul/smul, rmir/smir from termcap, but not rmcup/smcup because -# not everyone wants the alternate screen. -# + added u6, u7, u8, u9 strings for Daniel Weaver's tack program. -# + added kmous string for ncurses. -xterm-r5|xterm R5 version, - am, - km, - msgr, - xenl, - cols#80, - it#8, - lines#24, - bel=^G, - blink@, - bold=\E[1m, - clear=\E[H\E[2J, - cr=^M, - csr=\E[%i%p1%d;%p2%dr, - cub=\E[%p1%dD, - cub1=^H, - cud=\E[%p1%dB, - cud1=^J, - cuf=\E[%p1%dC, - cuf1=\E[C, - cup=\E[%i%p1%d;%p2%dH, - cuu=\E[%p1%dA, - cuu1=\E[A, - dch=\E[%p1%dP, - dch1=\E[P, - dl=\E[%p1%dM, - dl1=\E[M, - ed=\E[J, - el=\E[K, - home=\E[H, - ht=^I, - hts=\EH, - ich=\E[%p1%d@, - ich1=\E[@, - il=\E[%p1%dL, - il1=\E[L, - ind=^J, - kbs=^H, - kcub1=\EOD, - kcud1=\EOB, - kcuf1=\EOC, - kcuu1=\EOA, - kdch1=\177, - kdl1=\E[31~, - kel=\E[8~, - kend=\E[4~, - kf0=\EOq, - kf1=\E[11~, - kf10=\E[21~, - kf11=\E[23~, - kf12=\E[24~, - kf2=\E[12~, - kf3=\E[13~, - kf4=\E[14~, - kf5=\E[15~, - kf6=\E[17~, - kf7=\E[18~, - kf8=\E[19~, - kf9=\E[20~, - khome=\E[1~, - kich1=\E[2~, - kil1=\E[30~, - kmous=\E[M, - knp=\E[6~, - kpp=\E[5~, - rc=\E8, - rev=\E[7m, - ri=\EM, - rmir=\E[4l, - rmkx=\E[?1l\E>, - rmso=\E[m, - rmul=\E[m, - rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H, - sc=\E7, - sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, - sgr0=\E[m, - smir=\E[4h, - smkx=\E[?1h\E=, - smso=\E[7m, - smul=\E[4m, - tbc=\E[3g, - u6=\E[%i%d;%dR, - u7=\E[6n, - u8=\E[?1;2c, - u9=\E[c, -# -# Customization begins here. -xterm-xfree86|xterm terminal emulator (XFree86), - use=xterm-new, -# -# This is the only entry which you should have to customize, since "xterm" -# is widely used for a variety of incompatible terminal emulations including -# color_xterm and rxvt. -xterm|X11 terminal emulator, - use=xterm-new, -# use=xterm-r6, |