aboutsummaryrefslogtreecommitdiff
path: root/nx-X11/programs/xterm/terminfo
diff options
context:
space:
mode:
Diffstat (limited to 'nx-X11/programs/xterm/terminfo')
-rw-r--r--nx-X11/programs/xterm/terminfo1012
1 files changed, 1012 insertions, 0 deletions
diff --git a/nx-X11/programs/xterm/terminfo b/nx-X11/programs/xterm/terminfo
new file mode 100644
index 000000000..f0b5f4d3a
--- /dev/null
+++ b/nx-X11/programs/xterm/terminfo
@@ -0,0 +1,1012 @@
+# $XTermId: terminfo,v 1.111 2005/11/03 13:17:28 tom Exp $
+#
+# $Xorg: terminfo,v 1.3 2000/08/17 19:55:10 cpqbld Exp $
+#
+# meml locks memory above the cursor; memu unlocks (ala HP terminals)
+#
+# XFree86 updates/notes/new entries (including xterm-8bit, xterm-16color)
+# - Thomas E. Dickey
+#
+# $XFree86: xc/programs/xterm/terminfo,v 3.57 2005/11/03 13:17:28 dickey Exp $
+#
+# Special Capabilities:
+# --------------------
+# ich has a corresponding capability that inserts a single blank. We could
+# have used ich1=\E[@, which works with ncurses, but that is not standard
+# behavior. If it is set, then SVr4 vi (e.g., Solaris 2.6) emits both
+# smir/rmir and ich1.
+# meml locks memory above the cursor; memu unlocks (ala HP terminals). This
+# is not recognized by some older (e.g., SVr3) tic programs, but none
+# do more than warn about it. Ignore the warning.
+# smcup clears memory before switching to the alternate screen. The older
+# (deprecated) \E[?47h did not do this, requiring applications to
+# embed a \E[2J in the rmcup string. However, that behavior cannot
+# be disabled via titeInhibit, making that resource not function as
+# intended on systems with terminfo.
+# rs2/is2 are shorter with XFree86 xterm because it supports DECSTR. We
+# use the shorter sequence for compatibility with the termcap, which
+# is trimmed to keep it shorter than 1023 characters. It (escape \E[!p)
+# replaces these in the conventional vt100 reset-string:
+# \E7 - save cursor (fixes origin-mode side-effect)
+# \E[r - reset scrolling margins
+# \E[m - reset SGR (including color)
+# \E[?7h - reset wraparound mode (DECAWM)
+# \E[?1l - reset application cursor keys (DECCKM)
+# \E[?6l - reset origin mode (DECOM)
+# \E8 - restore cursor
+# DECSTR is recognized by XFree86 xterm even in vt52 mode.
+#
+# Editing Keypad:
+# --------------
+# XFree86 xterm emulates vt220 if the decTerminalID resource is set to 200 or
+# higher. Otherwise it emulates a vt100 or vt52 depending on the value of the
+# resource. When emulating a vt220, we support the editing keypad. Sun and PC
+# keyboards have an editing keypad which is similar to the vt220:
+#
+# VT220 editing keypad
+# ----------------------------
+# Find Insert Remove
+# Select Prev Next
+# ----------------------------
+#
+# Sun/PC editing keypad
+# ----------------------------
+# Insert Home PageUp
+# Delete End PageDn
+# ----------------------------
+#
+# If the sunKeyboard resource is true, we map it this way (adjusting the values
+# of Home, End and Delete):
+# VT220 Sun/PC
+# ----------------------------
+# Find Home
+# Select End
+# Insert Insert
+# Remove Delete
+# Prev PageUp
+# Next PageDn
+# ----------------------------
+#
+# Note that all of the keys on the editing keypad transmit escape sequences. A
+# vt220 does this only when in vt220 mode; when emulating a vt100 the editing
+# keypad is inactive.
+#
+# Alternative keycodes:
+# --------------------
+# Several of the function keys have alternative names, depending on the type of
+# host which your xterm is connected to. DEC (i.e., the VMS system) uses F15
+# as the HELP key, F16 as the DO key. Unix applications generally do not do
+# this. Curses applications in particular, assign a unique keycode to each
+# capability string. These terminal descriptions do not have conflicting
+# definitions, to ensure that Unix curses applications use a consistent set of
+# keycodes. To get a VMS-bias, make these substitutions:
+# 1. change khome to kfnd
+# 2. change kend to kslt
+# The original xterm-r6 entry does in fact have a VMS bias.
+#
+# Some legacy applications using the termcap emulation may expect kll where
+# we have specified kend.
+#
+# Function keys with modifiers (Sun/PC):
+# -------------------------------------
+# Shift-Fx - kf{12+x}
+# Control-Fx - kf{24+x}
+# Shift-Control-Fx - kf{36+x}
+#
+# The terminfo defines some special keys which are documented as "shifted",
+# e.g., kDC is shifted-delete-character.
+#
+# Note however, that even though the terminfo says a key might be sent, there
+# may be conflicts which prevent this. For example, it is common to use
+# shifted pageup and pagedown for window manager functions. The default
+# translation for xterm since X11R4 has overridden shifted Insert, Select,
+# PageUp and PageDown, which correspond to terminfo kIC, kEND, kPRV and kNXT
+# respectively.
+#
+xterm-new|modern xterm terminal emulator,
+ npc,
+ indn=\E[%p1%dS,
+ kDC=\E[3;2~,
+ kEND=\E[1;2F,
+ kHOM=\E[1;2H,
+ kIC=\E[2;2~,
+ kLFT=\E[1;2D,
+ kNXT=\E[6;2~,
+ kPRV=\E[5;2~,
+ kRIT=\E[1;2C,
+ kb2=\EOE,
+ kcbt=\E[Z,
+ kcub1=\EOD,
+ kcud1=\EOB,
+ kcuf1=\EOC,
+ kcuu1=\EOA,
+ kend=\EOF,
+ kent=\EOM,
+ khome=\EOH,
+ kich1=\E[2~,
+ kind=\E[1;2B,
+ kmous=\E[M,
+ knp=\E[6~,
+ kpp=\E[5~,
+ kri=\E[1;2A,
+ rin=\E[%p1%dT,
+ use=xterm+pcfkeys,
+ use=xterm-basic,
+# Encode modifiers using parameters (see ctlseqs.msg).
+# Note that this is unrelated to PCTERM.
+#
+# Some names are extensions allowed by ncurses:
+# kDN, kDN5, kDN6, kLFT5, kLFT6, kRIT5, kRIT6, kUP, kUP5, kUP6
+xterm+pcfkeys|fragment for PC-style keys,
+ kf1=\EOP,
+ kf10=\E[21~,
+ kf11=\E[23~,
+ kf12=\E[24~,
+ kf13=\EO2P,
+ kf14=\EO2Q,
+ kf15=\EO2R,
+ kf16=\EO2S,
+ kf17=\E[15;2~,
+ kf18=\E[17;2~,
+ kf19=\E[18;2~,
+ kf2=\EOQ,
+ kf20=\E[19;2~,
+ kf21=\E[20;2~,
+ kf22=\E[21;2~,
+ kf23=\E[23;2~,
+ kf24=\E[24;2~,
+ kf25=\EO5P,
+ kf26=\EO5Q,
+ kf27=\EO5R,
+ kf28=\EO5S,
+ kf29=\E[15;5~,
+ kf3=\EOR,
+ kf30=\E[17;5~,
+ kf31=\E[18;5~,
+ kf32=\E[19;5~,
+ kf33=\E[20;5~,
+ kf34=\E[21;5~,
+ kf35=\E[23;5~,
+ kf36=\E[24;5~,
+ kf37=\EO6P,
+ kf38=\EO6Q,
+ kf39=\EO6R,
+ kf4=\EOS,
+ kf40=\EO6S,
+ kf41=\E[15;6~,
+ kf42=\E[17;6~,
+ kf43=\E[18;6~,
+ kf44=\E[19;6~,
+ kf45=\E[20;6~,
+ kf46=\E[21;6~,
+ kf47=\E[23;6~,
+ kf48=\E[24;6~,
+ kf49=\EO3P,
+ kf5=\E[15~,
+ kf50=\EO3Q,
+ kf51=\EO3R,
+ kf52=\EO3S,
+ kf53=\E[15;3~,
+ kf54=\E[17;3~,
+ kf55=\E[18;3~,
+ kf56=\E[19;3~,
+ kf57=\E[20;3~,
+ kf58=\E[21;3~,
+ kf59=\E[23;3~,
+ kf6=\E[17~,
+ kf60=\E[24;3~,
+ kf61=\EO4P,
+ kf62=\EO4Q,
+ kf63=\EO4R,
+ kf7=\E[18~,
+ kf8=\E[19~,
+ kf9=\E[20~,
+ kDN=\E[1;2B,
+ kDN5=\E[1;5B,
+ kDN6=\E[1;6B,
+ kLFT5=\E[1;5D,
+ kLFT6=\E[1;6D,
+ kRIT5=\E[1;5C,
+ kRIT6=\E[1;6C,
+ kUP=\E[1;2A,
+ kUP5=\E[1;5A,
+ kUP6=\E[1;6A,
+#
+# This chunk is used for building the VT220/Sun/PC keyboard variants.
+xterm-basic|modern xterm terminal emulator - common,
+ am,
+ bce,
+ km,
+ mc5i,
+ mir,
+ msgr,
+ xenl,
+ colors#8,
+ cols#80,
+ it#8,
+ lines#24,
+ pairs#64,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G,
+ blink=\E[5m,
+ bold=\E[1m,
+ cbt=\E[Z,
+ civis=\E[?25l,
+ clear=\E[H\E[2J,
+ cnorm=\E[?12l\E[?25h,
+ cr=^M,
+ csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD,
+ cub1=^H,
+ cud=\E[%p1%dB,
+ cud1=^J,
+ cuf=\E[%p1%dC,
+ cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA,
+ cuu1=\E[A,
+ cvvis=\E[?12;25h,
+ dch=\E[%p1%dP,
+ dch1=\E[P,
+ dl=\E[%p1%dM,
+ dl1=\E[M,
+ ech=\E[%p1%dX,
+ ed=\E[J,
+ el=\E[K,
+ el1=\E[1K,
+ flash=\E[?5h$<100/>\E[?5l,
+ home=\E[H,
+ hpa=\E[%i%p1%dG,
+ ht=^I,
+ hts=\EH,
+ ich=\E[%p1%d@,
+ il=\E[%p1%dL,
+ il1=\E[L,
+ ind=^J,
+ invis=\E[8m,
+ is2=\E[!p\E[?3;4l\E[4l\E>,
+ kbs=^H,
+ kdch1=\E[3~,
+ mc0=\E[i,
+ mc4=\E[4i,
+ mc5=\E[5i,
+ meml=\El,
+ memu=\Em,
+ op=\E[39;49m,
+ rc=\E8,
+ rev=\E[7m,
+ ri=\EM,
+ rmacs=\E(B,
+ rmam=\E[?7l,
+ rmcup=\E[?1049l,
+ rmir=\E[4l,
+ rmkx=\E[?1l\E>,
+ rmso=\E[27m,
+ rmul=\E[24m,
+ rs1=\Ec,
+ rs2=\E[!p\E[?3;4l\E[4l\E>,
+ sc=\E7,
+ setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm,
+ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[m\E(B,
+ smacs=\E(0,
+ smam=\E[?7h,
+ smcup=\E[?1049h,
+ smir=\E[4h,
+ smkx=\E[?1h\E=,
+ smso=\E[7m,
+ smul=\E[4m,
+ tbc=\E[3g,
+ u6=\E[%i%d;%dR,
+ u7=\E[6n,
+ u8=\E[?1;2c,
+ u9=\E[c,
+ vpa=\E[%i%p1%dd,
+#
+# The xterm-new description has all of the features, but is not completely
+# compatible with vt220. If you are using a Sun or PC keyboard, set the
+# sunKeyboard resource to true:
+# + maps the editing keypad
+# + interprets control-function-key as a second array of keys, so a
+# 12-fkey keyboard can support vt220's 20-fkeys.
+# + maps numeric keypad "+" to ",".
+# + uses DEC-style control sequences for the application keypad.
+#
+# Some packagers modify xterm's resource definitions to provide extra function
+# keys by using the shift-modifier in the translations resource. However, that
+# interferes with the DECUDK functionality.
+#
+xterm-vt220|xterm emulating vt220,
+ ka1=\EOw,
+ ka3=\EOy,
+ kb2=\EOu,
+ kc1=\EOq,
+ kc3=\EOs,
+ kcbt=\E[Z,
+ kcub1=\EOD,
+ kcud1=\EOB,
+ kcuf1=\EOC,
+ kcuu1=\EOA,
+ kend=\E[4~,
+ kent=\EOM,
+ kf1=\EOP,
+ kf10=\E[21~,
+ kf11=\E[23~,
+ kf12=\E[24~,
+ kf13=\E[25~,
+ kf14=\E[26~,
+ kf15=\E[28~,
+ kf16=\E[29~,
+ kf17=\E[31~,
+ kf18=\E[32~,
+ kf19=\E[33~,
+ kf2=\EOQ,
+ kf20=\E[34~,
+ kf3=\EOR,
+ kf4=\EOS,
+ kf5=\E[15~,
+ kf6=\E[17~,
+ kf7=\E[18~,
+ kf8=\E[19~,
+ kf9=\E[20~,
+ khome=\E[1~,
+ kich1=\E[2~,
+ kmous=\E[M,
+ knp=\E[6~,
+ kpp=\E[5~,
+ use=xterm-basic,
+#
+xterm-vt52|xterm emulating dec vt52,
+ cols#80,
+ it#8,
+ lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G,
+ clear=\EH\EJ,
+ cr=^M,
+ cub1=\ED,
+ cud1=\EB,
+ cuf1=\EC,
+ cup=\EY%p1%' '%+%c%p2%' '%+%c,
+ cuu1=\EA,
+ ed=\EJ,
+ el=\EK,
+ home=\EH,
+ ht=^I,
+ ind=^J,
+ kbs=^H,
+ kcub1=\ED,
+ kcud1=\EB,
+ kcuf1=\EC,
+ kcuu1=\EA,
+ nel=^M^J,
+ ri=\EI,
+ rmacs=\EG,
+ smacs=\EF,
+#
+# kf30-kf45 are keysyms XK_R1 through XK_R15 on the Sun keyboard.
+xterm-sun|xterm with sun function keys,
+ kb2=\E[218z,
+ kcpy=\E[197z,
+ kcub1=\EOD,
+ kcud1=\EOB,
+ kcuf1=\EOC,
+ kcuu1=\EOA,
+ kdch1=\177,
+ kend=\E[220z,
+ kent=\EOM,
+ kf1=\E[224z,
+ kf10=\E[233z,
+ kf11=\E[192z,
+ kf12=\E[193z,
+ kf13=\E[194z,
+ kf14=\E[195z,
+ kf15=\E[196z,
+ kf17=\E[198z,
+ kf18=\E[199z,
+ kf19=\E[200z,
+ kf2=\E[225z,
+ kf20=\E[201z,
+ kf3=\E[226z,
+ kf31=\E[208z,
+ kf32=\E[209z,
+ kf33=\E[210z,
+ kf34=\E[211z,
+ kf35=\E[212z,
+ kf36=\E[213z,
+ kf38=\E[215z,
+ kf4=\E[227z,
+ kf40=\E[217z,
+ kf42=\E[219z,
+ kf44=\E[221z,
+ kf5=\E[228z,
+ kf6=\E[229z,
+ kf7=\E[230z,
+ kf8=\E[231z,
+ kf9=\E[232z,
+ kfnd=\E[200z,
+ khlp=\E[196z,
+ khome=\E[214z,
+ kich1=\E[2z,
+ kmous=\E[M,
+ knp=\E[222z,
+ kpp=\E[216z,
+ kund=\E[195z,
+ use=xterm-basic,
+#
+xterm-hp|xterm with hpterm function keys,
+ kclr=\EJ,
+ kcub1=\ED,
+ kcud1=\EB,
+ kcuf1=\EC,
+ kcuu1=\EA,
+ kdch1=\EP,
+ kend=\EF,
+ kf1=\Ep,
+ kf2=\Eq,
+ kf3=\Er,
+ kf4=\Es,
+ kf5=\Et,
+ kf6=\Eu,
+ kf7=\Ev,
+ kf8=\Ew,
+ khome=\Eh,
+ kich1=\EQ,
+ knp=\ES,
+ kpp=\ET,
+ use=xterm-basic,
+xterm-sco|xterm with SCO function keys,
+ kcub1=\E[D,
+ kcud1=\E[B,
+ kcuf1=\E[C,
+ kcuu1=\E[A,
+ kend=\E[F,
+ kf1=\E[M,
+ kf10=\E[V,
+ kf11=\E[W,
+ kf12=\E[X,
+ kf13=\E[Y,
+ kf15=\E[a,
+ kf16=\E[b,
+ kf17=\E[c,
+ kf18=\E[d,
+ kf19=\E[e,
+ kf2=\E[N,
+ kf20=\E[f,
+ kf21=\E[g,
+ kf22=\E[h,
+ kf23=\E[i,
+ kf24=\E[j,
+ kf25=\E[k,
+ kf26=\E[l,
+ kf27=\E[m,
+ kf28=\E[n,
+ kf29=\E[o,
+ kf3=\E[O,
+ kf30=\E[p,
+ kf31=\E[q,
+ kf32=\E[r,
+ kf33=\E[s,
+ kf34=\E[t,
+ kf35=\E[u,
+ kf4=\E[P,
+ kf5=\E[Q,
+ kf6=\E[R,
+ kf7=\E[S,
+ kf8=\E[T,
+ kf9=\E[U,
+ khome=\E[H,
+ kich1=\E[L,
+ knp=\E[G,
+ kpp=\E[I,
+ use=xterm-basic,
+#
+# Other variants:
+xterm-24|xterms|vs100|xterm terminal emulator (X Window System),
+ lines#24,
+ use=xterm,
+xterm-65|xterm with tall window 65x80 (X Window System),
+ lines#65,
+ use=xterm,
+xterm-bold|xterm with bold instead of underline (X Window System),
+ smso=\E[7m,
+ smul=\E[1m,
+ use=xterm,
+xterm-boldso|xterm with bold for standout (X Window System),
+ rmso=\E[m,
+ smso=\E[1m,
+ use=xterm,
+xterm-mono|monochrome xterm,
+ bce@,
+ colors@,
+ ncv@,
+ pairs@,
+ op@,
+ setab@,
+ setaf@,
+ setb@,
+ setf@,
+ sgr@,
+ use=xterm,
+#
+# VTxxx terminals are usually set up so that full-screen applications will use
+# the cursor application mode strings. This is good for full-screen
+# applications, including legacy applications which may have hard-coded
+# behavior, but bad for interactive shells (e.g., tcsh, bash) which use arrow
+# keys to scroll through a history of command strings.
+#
+# To see the difference between normal/application modes, consider this example:
+# + In normal (non-application) mode, the terminal transmits a down-arrow
+# as \E[C, which happens to echo as a down-arrow.
+# + In application mode the terminal transmits \EOC, which echoes as C.
+# That is because the \EO is the SS3 control, which says to use the
+# character from the G3 character set for the next cell.
+#
+# One example of hard-coded behavior would be for applications written to work
+# with VT52 and VT100 terminals. If the application's parser ignores 'O' and
+# '?' characters after the escape, then the cursor and keypad strings for the
+# two terminals are the same. (Indeed, one of the first curses applications
+# which I used did something like this to cover "ANSI" terminals -TD).
+#
+# To make this work (leaving the cursor keys in normal mode), we have to adjust
+# the terminal initialization sequences:
+#
+# smkx/rmkx set/reset the cursor and keypad application modes. We retain
+# the latter (otherwise many applications fail).
+#
+# smcup/rmcup set/restore cursor-addressing mode for full-screen
+# applications. For xterm, this normally means the alternate
+# screen, which is not compatible with interactive shells. Some
+# programs are "smart" and disable these.
+#
+xterm-noapp|xterm with cursor keys in normal mode,
+ kcub1=\E[D,
+ kcud1=\E[B,
+ kcuf1=\E[C,
+ kcuu1=\E[A,
+ rmcup@,
+ rmkx=\E>,
+ smcup@,
+ smkx=\E=,
+ use=xterm,
+#
+# This should work for the commonly used "color xterm" variations (XFree86
+# xterm, color_xterm, nxterm, rxvt). Note that it does not set 'bce', so for
+# XFree86 and and rxvt, some applications that use colors will be less
+# efficient, and in a few special cases (with "smart" optimization) the wrong
+# color will be painted in spots.
+xterm-color|generic "ANSI" color xterm (X Window System),
+ colors#8,
+ ncv@,
+ pairs#64,
+ op=\E[m,
+ setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm,
+ use=xterm-r6,
+#
+# vi may work better with this entry, because vi
+# doesn't use insert mode much
+xterm-ic|xterm-vi|xterm with insert character instead of insert mode,
+ mir@,
+ ich=\E[%p1%d@,
+ ich1=\E[@,
+ rmir@,
+ smir@,
+ use=xterm,
+#
+# This is used only for testing (it's not relevant to DEC VTxxx terminals, but
+# to ncurses).
+xterm-xmc|xterm with magic-cookie glitch,
+ xmc#1,
+ use=xterm-new,
+#
+# This one also is primarily for testing ncurses; while the ISO 6429 defines
+# the REP control, none of the DEC VTxxx terminals (VT52 through VT420) support
+# it.
+xterm-rep|xterm with repeat-character control,
+ rep=%p1%c\E[%p2%{1}%-%db,
+ use=xterm-new,
+#
+# This is mainly for testing xterm; the real VT220 will not let you switch
+# character sets without first altering the keyboard language in the setup
+# screen. Some emulators allow this anyway. (Note that these strings are
+# normally used only for printers). The parameter to csnm and scs is the same
+# in both cases: the keyboard language parameter returned by CSI ? 2 6 n.
+xterm-nrc|xterm with VT220 national replacement character sets,
+ csnm=%?%p1%{1}%=%tNorth American%e%p1%{2}%=%tBritish%e%p1%{3}%=%tFlemish%e%p1%{4}%=%tFrench Canadian%e%p1%{5}%=%tDanish%e%p1%{6}%=%tFinnish%e%p1%{7}%=%tGerman%e%p1%{8}%=%tDutch%e%p1%{9}%=%tItalian%e%p1%{10}%=%tSwiss (French)%e%p1%{11}%=%tSwiss (German)%e%p1%{12}%=%tSwedish%e%p1%{13}%=%tNorwegian%e%p1%{14}%=%tFrench/Belgian%e%p1%{15}%=%tSpanish%;,
+ scs=%?%p1%{1}%=%t\E(B%e%p1%{2}%=%t\E(A%e%p1%{3}%=%t\E(R%e%p1%{4}%=%t\E(9%e%p1%{5}%=%t\E(E%e%p1%{6}%=%t\E(5%e%p1%{7}%=%t\E(K%e%p1%{8}%=%t\E(4%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(=%e%p1%{11}%=%t\E(=%e%p1%{12}%=%t\E(7%e%p1%{13}%=%t\E(E%e%p1%{14}%=%t\E(R%e%p1%{15}%=%t\E(Z%;,
+ use=xterm-new,
+#
+# Foreground 0-15 maps (with toggles) into 30-37 & 90-97
+# Background 0-15 maps (with toggles) into 40-47 & 100-107
+#
+# Originally I suppressed setaf/setab, since ANSI specifies only 8 colors, but
+# Stephen Marley persuaded me to allow the "ANSI" color controls to extend to
+# 16 colors. (Note that ncurses 4.2 uses setf/setb from this description;
+# however 5.0 selects either according to their availability). - T.Dickey
+#
+# SVr4 curses does not use more than 8 colors anyway, so using 16 colors is
+# either for terminfo-level applications or via ncurses.
+xterm-16color|xterm with 16 colors,
+ colors#16,
+ ncv#32,
+ pairs#256,
+ setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
+ setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
+ setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
+ setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
+ use=xterm-new,
+#
+# This uses RGB values 0..1000
+#
+# 256 colors should give 65536 pairs, but terminfo stores numbers in a signed
+# short. Most people will not notice problems with only 32767 pairs.
+xterm-256color|xterm with 256 colors,
+ ccc,
+ colors#256,
+ pairs#32767,
+ initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
+ setab=\E[48;5;%p1%dm,
+ setaf=\E[38;5;%p1%dm,
+ setb=\E[48;5;%p1%dm,
+ setf=\E[38;5;%p1%dm,
+ use=xterm-new,
+xterm-88color|xterm with 88 colors,
+ colors#88,
+ pairs#7744,
+ use=xterm-256color,
+#
+# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
+# To use it, your decTerminalID resource must be set to 200 or above, and the
+# sunKeyboard resource set to true.
+#
+# HTS \E H \210
+# RI \E M \215
+# SS3 \E O \217
+# CSI \E [ \233
+#
+xterm-8bit|xterm terminal emulator with 8-bit controls (X Window System),
+ am,
+ bce,
+ km,
+ mc5i,
+ mir,
+ msgr,
+ npc,
+ xenl,
+ colors#8,
+ cols#80,
+ it#8,
+ lines#24,
+ pairs#64,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G,
+ blink=\2335m,
+ bold=\2331m,
+ cbt=\233Z,
+ civis=\233?25l,
+ clear=\233H\2332J,
+ cnorm=\233?25l\233?25h,
+ cr=^M,
+ csr=\233%i%p1%d;%p2%dr,
+ cub=\233%p1%dD,
+ cub1=^H,
+ cud=\233%p1%dB,
+ cud1=^J,
+ cuf=\233%p1%dC,
+ cuf1=\233C,
+ cup=\233%i%p1%d;%p2%dH,
+ cuu=\233%p1%dA,
+ cuu1=\233A,
+ cvvis=\233?12;25h,
+ dch=\233%p1%dP,
+ dch1=\233P,
+ dl=\233%p1%dM,
+ dl1=\233M,
+ ech=\233%p1%dX,
+ ed=\233J,
+ el=\233K,
+ el1=\2331K,
+ flash=\233?5h$<100/>\233?5l,
+ home=\233H,
+ hpa=\233%i%p1%dG,
+ ht=^I,
+ hts=\210,
+ ich=\233%p1%d@,
+ il=\233%p1%dL,
+ il1=\233L,
+ ind=^J,
+ invis=\2338m,
+ is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
+ ka1=\217w,
+ ka3=\217u,
+ kb2=\217y,
+ kbeg=\217E,
+ kbs=^H,
+ kc1=\217q,
+ kc3=\217s,
+ kcbt=\233Z,
+ kcub1=\217D,
+ kcud1=\217B,
+ kcuf1=\217C,
+ kcuu1=\217A,
+ kdch1=\2333~,
+ kend=\2334~,
+ kent=\217M,
+ kf1=\23311~,
+ kf10=\23321~,
+ kf11=\23323~,
+ kf12=\23324~,
+ kf13=\23325~,
+ kf14=\23326~,
+ kf15=\23328~,
+ kf16=\23329~,
+ kf17=\23331~,
+ kf18=\23332~,
+ kf19=\23333~,
+ kf2=\23312~,
+ kf20=\23334~,
+ kf3=\23313~,
+ kf4=\23314~,
+ kf5=\23315~,
+ kf6=\23317~,
+ kf7=\23318~,
+ kf8=\23319~,
+ kf9=\23320~,
+ khome=\2331~,
+ kich1=\2332~,
+ kmous=\233M,
+ knp=\2336~,
+ kpp=\2335~,
+ mc0=\233i,
+ mc4=\2334i,
+ mc5=\2335i,
+ meml=\El,
+ memu=\Em,
+ op=\23339;49m,
+ rc=\E8,
+ rev=\2337m,
+ ri=\215,
+ rmacs=\E(B,
+ rmam=\233?7l,
+ rmcup=\233?1049l,
+ rmir=\2334l,
+ rmkx=\233?1l\E>,
+ rmso=\23327m,
+ rmul=\23324m,
+ rs1=\Ec,
+ rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
+ sc=\E7,
+ setab=\2334%p1%dm,
+ setaf=\2333%p1%dm,
+ setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\233m\E(B,
+ smacs=\E(0,
+ smam=\233?7h,
+ smcup=\233?1049h,
+ smir=\2334h,
+ smkx=\233?1h\E=,
+ smso=\2337m,
+ smul=\2334m,
+ tbc=\2333g,
+ u6=\233[%i%d;%dR,
+ u7=\E[6n,
+ u8=\233[?1;2c,
+ u9=\E[c,
+ vpa=\233%i%p1%dd,
+#
+# Compatible with the R6 xterm, with the following changes:
+# + added acsc (perhaps some versions of tic assume the standard vt100
+# alternate character set)
+# + added u6, u7, u8, u9 strings for Daniel Weaver's tack program.
+# + added kmous string for ncurses.
+# + added khome/kend strings (which conflict with kfnd/kslt, see note).
+xterm-r6|xterm-old|xterm X11R6 version,
+ am,
+ km,
+ mir,
+ msgr,
+ xenl,
+ cols#80,
+ it#8,
+ lines#24,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G,
+ blink@,
+ bold=\E[1m,
+ clear=\E[H\E[2J,
+ cr=^M,
+ csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD,
+ cub1=^H,
+ cud=\E[%p1%dB,
+ cud1=^J,
+ cuf=\E[%p1%dC,
+ cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA,
+ cuu1=\E[A,
+ dch=\E[%p1%dP,
+ dch1=\E[P,
+ dl=\E[%p1%dM,
+ dl1=\E[M,
+ ed=\E[J,
+ el=\E[K,
+ enacs=\E)0,
+ home=\E[H,
+ ht=^I,
+ il=\E[%p1%dL,
+ il1=\E[L,
+ ind=^J,
+ is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
+ kbs=^H,
+ kcub1=\EOD,
+ kcud1=\EOB,
+ kcuf1=\EOC,
+ kcuu1=\EOA,
+ kdch1=\177,
+ kend=\E[4~,
+ kf1=\E[11~,
+ kf10=\E[21~,
+ kf11=\E[23~,
+ kf12=\E[24~,
+ kf13=\E[25~,
+ kf14=\E[26~,
+ kf15=\E[28~,
+ kf16=\E[29~,
+ kf17=\E[31~,
+ kf18=\E[32~,
+ kf19=\E[33~,
+ kf2=\E[12~,
+ kf20=\E[34~,
+ kf3=\E[13~,
+ kf4=\E[14~,
+ kf5=\E[15~,
+ kf6=\E[17~,
+ kf7=\E[18~,
+ kf8=\E[19~,
+ kf9=\E[20~,
+ khome=\E[1~,
+ kich1=\E[2~,
+ kmous=\E[M,
+ knp=\E[6~,
+ kpp=\E[5~,
+ meml=\El,
+ memu=\Em,
+ rc=\E8,
+ rev=\E[7m,
+ ri=\EM,
+ rmacs=^O,
+ rmcup=\E[2J\E[?47l\E8,
+ rmir=\E[4l,
+ rmkx=\E[?1l\E>,
+ rmso=\E[m,
+ rmul=\E[m,
+ rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
+ sc=\E7,
+ sgr0=\E[m,
+ smacs=^N,
+ smcup=\E7\E[?47h,
+ smir=\E[4h,
+ smkx=\E[?1h\E=,
+ smso=\E[7m,
+ smul=\E[4m,
+ tbc=\E[3g,
+ u6=\E[%i%d;%dR,
+ u7=\E[6n,
+ u8=\E[?1;2c,
+ u9=\E[c,
+#
+# Compatible with the R5 xterm, with the following changes:
+# + changed 'blink=@', to 'blink@' (the former meant that "@" would start
+# a blink, the latter that it is not supported).
+# + changed kf1 through kf4 to correspond with actual usage. Though X
+# supports keypad symbols for PF1 to PF4, and xterm interprets these
+# correctly, the F1 to F4 codes are commonly (but incorrectly) used.
+# + moved reset string from rs1 to rs2, to correlate better with termcap.
+# + make khome consistent with other entries.
+# + use rmul/smul, rmir/smir from termcap, but not rmcup/smcup because
+# not everyone wants the alternate screen.
+# + added u6, u7, u8, u9 strings for Daniel Weaver's tack program.
+# + added kmous string for ncurses.
+xterm-r5|xterm R5 version,
+ am,
+ km,
+ msgr,
+ xenl,
+ cols#80,
+ it#8,
+ lines#24,
+ bel=^G,
+ blink@,
+ bold=\E[1m,
+ clear=\E[H\E[2J,
+ cr=^M,
+ csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD,
+ cub1=^H,
+ cud=\E[%p1%dB,
+ cud1=^J,
+ cuf=\E[%p1%dC,
+ cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA,
+ cuu1=\E[A,
+ dch=\E[%p1%dP,
+ dch1=\E[P,
+ dl=\E[%p1%dM,
+ dl1=\E[M,
+ ed=\E[J,
+ el=\E[K,
+ home=\E[H,
+ ht=^I,
+ hts=\EH,
+ ich=\E[%p1%d@,
+ ich1=\E[@,
+ il=\E[%p1%dL,
+ il1=\E[L,
+ ind=^J,
+ kbs=^H,
+ kcub1=\EOD,
+ kcud1=\EOB,
+ kcuf1=\EOC,
+ kcuu1=\EOA,
+ kdch1=\177,
+ kdl1=\E[31~,
+ kel=\E[8~,
+ kend=\E[4~,
+ kf0=\EOq,
+ kf1=\E[11~,
+ kf10=\E[21~,
+ kf11=\E[23~,
+ kf12=\E[24~,
+ kf2=\E[12~,
+ kf3=\E[13~,
+ kf4=\E[14~,
+ kf5=\E[15~,
+ kf6=\E[17~,
+ kf7=\E[18~,
+ kf8=\E[19~,
+ kf9=\E[20~,
+ khome=\E[1~,
+ kich1=\E[2~,
+ kil1=\E[30~,
+ kmous=\E[M,
+ knp=\E[6~,
+ kpp=\E[5~,
+ rc=\E8,
+ rev=\E[7m,
+ ri=\EM,
+ rmir=\E[4l,
+ rmkx=\E[?1l\E>,
+ rmso=\E[m,
+ rmul=\E[m,
+ rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
+ sc=\E7,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
+ sgr0=\E[m,
+ smir=\E[4h,
+ smkx=\E[?1h\E=,
+ smso=\E[7m,
+ smul=\E[4m,
+ tbc=\E[3g,
+ u6=\E[%i%d;%dR,
+ u7=\E[6n,
+ u8=\E[?1;2c,
+ u9=\E[c,
+#
+# Customization begins here.
+xterm-xfree86|xterm terminal emulator (XFree86),
+ use=xterm-new,
+#
+# This is the only entry which you should have to customize, since "xterm"
+# is widely used for a variety of incompatible terminal emulations including
+# color_xterm and rxvt.
+xterm|X11 terminal emulator,
+ use=xterm-new,
+# use=xterm-r6,