diff options
Diffstat (limited to 'nx-X11/programs/xterm/terminfo')
| -rw-r--r-- | nx-X11/programs/xterm/terminfo | 1012 |
1 files changed, 1012 insertions, 0 deletions
diff --git a/nx-X11/programs/xterm/terminfo b/nx-X11/programs/xterm/terminfo new file mode 100644 index 000000000..f0b5f4d3a --- /dev/null +++ b/nx-X11/programs/xterm/terminfo @@ -0,0 +1,1012 @@ +# $XTermId: terminfo,v 1.111 2005/11/03 13:17:28 tom Exp $ +# +# $Xorg: terminfo,v 1.3 2000/08/17 19:55:10 cpqbld Exp $ +# +# meml locks memory above the cursor; memu unlocks (ala HP terminals) +# +# XFree86 updates/notes/new entries (including xterm-8bit, xterm-16color) +# - Thomas E. Dickey +# +# $XFree86: xc/programs/xterm/terminfo,v 3.57 2005/11/03 13:17:28 dickey Exp $ +# +# Special Capabilities: +# -------------------- +# ich has a corresponding capability that inserts a single blank. We could +# have used ich1=\E[@, which works with ncurses, but that is not standard +# behavior. If it is set, then SVr4 vi (e.g., Solaris 2.6) emits both +# smir/rmir and ich1. +# meml locks memory above the cursor; memu unlocks (ala HP terminals). This +# is not recognized by some older (e.g., SVr3) tic programs, but none +# do more than warn about it. Ignore the warning. +# smcup clears memory before switching to the alternate screen. The older +# (deprecated) \E[?47h did not do this, requiring applications to +# embed a \E[2J in the rmcup string. However, that behavior cannot +# be disabled via titeInhibit, making that resource not function as +# intended on systems with terminfo. +# rs2/is2 are shorter with XFree86 xterm because it supports DECSTR. We +# use the shorter sequence for compatibility with the termcap, which +# is trimmed to keep it shorter than 1023 characters. It (escape \E[!p) +# replaces these in the conventional vt100 reset-string: +# \E7 - save cursor (fixes origin-mode side-effect) +# \E[r - reset scrolling margins +# \E[m - reset SGR (including color) +# \E[?7h - reset wraparound mode (DECAWM) +# \E[?1l - reset application cursor keys (DECCKM) +# \E[?6l - reset origin mode (DECOM) +# \E8 - restore cursor +# DECSTR is recognized by XFree86 xterm even in vt52 mode. +# +# Editing Keypad: +# -------------- +# XFree86 xterm emulates vt220 if the decTerminalID resource is set to 200 or +# higher. Otherwise it emulates a vt100 or vt52 depending on the value of the +# resource. When emulating a vt220, we support the editing keypad. Sun and PC +# keyboards have an editing keypad which is similar to the vt220: +# +# VT220 editing keypad +# ---------------------------- +# Find Insert Remove +# Select Prev Next +# ---------------------------- +# +# Sun/PC editing keypad +# ---------------------------- +# Insert Home PageUp +# Delete End PageDn +# ---------------------------- +# +# If the sunKeyboard resource is true, we map it this way (adjusting the values +# of Home, End and Delete): +# VT220 Sun/PC +# ---------------------------- +# Find Home +# Select End +# Insert Insert +# Remove Delete +# Prev PageUp +# Next PageDn +# ---------------------------- +# +# Note that all of the keys on the editing keypad transmit escape sequences. A +# vt220 does this only when in vt220 mode; when emulating a vt100 the editing +# keypad is inactive. +# +# Alternative keycodes: +# -------------------- +# Several of the function keys have alternative names, depending on the type of +# host which your xterm is connected to. DEC (i.e., the VMS system) uses F15 +# as the HELP key, F16 as the DO key. Unix applications generally do not do +# this. Curses applications in particular, assign a unique keycode to each +# capability string. These terminal descriptions do not have conflicting +# definitions, to ensure that Unix curses applications use a consistent set of +# keycodes. To get a VMS-bias, make these substitutions: +# 1. change khome to kfnd +# 2. change kend to kslt +# The original xterm-r6 entry does in fact have a VMS bias. +# +# Some legacy applications using the termcap emulation may expect kll where +# we have specified kend. +# +# Function keys with modifiers (Sun/PC): +# ------------------------------------- +# Shift-Fx - kf{12+x} +# Control-Fx - kf{24+x} +# Shift-Control-Fx - kf{36+x} +# +# The terminfo defines some special keys which are documented as "shifted", +# e.g., kDC is shifted-delete-character. +# +# Note however, that even though the terminfo says a key might be sent, there +# may be conflicts which prevent this. For example, it is common to use +# shifted pageup and pagedown for window manager functions. The default +# translation for xterm since X11R4 has overridden shifted Insert, Select, +# PageUp and PageDown, which correspond to terminfo kIC, kEND, kPRV and kNXT +# respectively. +# +xterm-new|modern xterm terminal emulator, + npc, + indn=\E[%p1%dS, + kDC=\E[3;2~, + kEND=\E[1;2F, + kHOM=\E[1;2H, + kIC=\E[2;2~, + kLFT=\E[1;2D, + kNXT=\E[6;2~, + kPRV=\E[5;2~, + kRIT=\E[1;2C, + kb2=\EOE, + kcbt=\E[Z, + kcub1=\EOD, + kcud1=\EOB, + kcuf1=\EOC, + kcuu1=\EOA, + kend=\EOF, + kent=\EOM, + khome=\EOH, + kich1=\E[2~, + kind=\E[1;2B, + kmous=\E[M, + knp=\E[6~, + kpp=\E[5~, + kri=\E[1;2A, + rin=\E[%p1%dT, + use=xterm+pcfkeys, + use=xterm-basic, +# Encode modifiers using parameters (see ctlseqs.msg). +# Note that this is unrelated to PCTERM. +# +# Some names are extensions allowed by ncurses: +# kDN, kDN5, kDN6, kLFT5, kLFT6, kRIT5, kRIT6, kUP, kUP5, kUP6 +xterm+pcfkeys|fragment for PC-style keys, + kf1=\EOP, + kf10=\E[21~, + kf11=\E[23~, + kf12=\E[24~, + kf13=\EO2P, + kf14=\EO2Q, + kf15=\EO2R, + kf16=\EO2S, + kf17=\E[15;2~, + kf18=\E[17;2~, + kf19=\E[18;2~, + kf2=\EOQ, + kf20=\E[19;2~, + kf21=\E[20;2~, + kf22=\E[21;2~, + kf23=\E[23;2~, + kf24=\E[24;2~, + kf25=\EO5P, + kf26=\EO5Q, + kf27=\EO5R, + kf28=\EO5S, + kf29=\E[15;5~, + kf3=\EOR, + kf30=\E[17;5~, + kf31=\E[18;5~, + kf32=\E[19;5~, + kf33=\E[20;5~, + kf34=\E[21;5~, + kf35=\E[23;5~, + kf36=\E[24;5~, + kf37=\EO6P, + kf38=\EO6Q, + kf39=\EO6R, + kf4=\EOS, + kf40=\EO6S, + kf41=\E[15;6~, + kf42=\E[17;6~, + kf43=\E[18;6~, + kf44=\E[19;6~, + kf45=\E[20;6~, + kf46=\E[21;6~, + kf47=\E[23;6~, + kf48=\E[24;6~, + kf49=\EO3P, + kf5=\E[15~, + kf50=\EO3Q, + kf51=\EO3R, + kf52=\EO3S, + kf53=\E[15;3~, + kf54=\E[17;3~, + kf55=\E[18;3~, + kf56=\E[19;3~, + kf57=\E[20;3~, + kf58=\E[21;3~, + kf59=\E[23;3~, + kf6=\E[17~, + kf60=\E[24;3~, + kf61=\EO4P, + kf62=\EO4Q, + kf63=\EO4R, + kf7=\E[18~, + kf8=\E[19~, + kf9=\E[20~, + kDN=\E[1;2B, + kDN5=\E[1;5B, + kDN6=\E[1;6B, + kLFT5=\E[1;5D, + kLFT6=\E[1;6D, + kRIT5=\E[1;5C, + kRIT6=\E[1;6C, + kUP=\E[1;2A, + kUP5=\E[1;5A, + kUP6=\E[1;6A, +# +# This chunk is used for building the VT220/Sun/PC keyboard variants. +xterm-basic|modern xterm terminal emulator - common, + am, + bce, + km, + mc5i, + mir, + msgr, + xenl, + colors#8, + cols#80, + it#8, + lines#24, + pairs#64, + acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, + blink=\E[5m, + bold=\E[1m, + cbt=\E[Z, + civis=\E[?25l, + clear=\E[H\E[2J, + cnorm=\E[?12l\E[?25h, + cr=^M, + csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, + cub1=^H, + cud=\E[%p1%dB, + cud1=^J, + cuf=\E[%p1%dC, + cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, + cuu1=\E[A, + cvvis=\E[?12;25h, + dch=\E[%p1%dP, + dch1=\E[P, + dl=\E[%p1%dM, + dl1=\E[M, + ech=\E[%p1%dX, + ed=\E[J, + el=\E[K, + el1=\E[1K, + flash=\E[?5h$<100/>\E[?5l, + home=\E[H, + hpa=\E[%i%p1%dG, + ht=^I, + hts=\EH, + ich=\E[%p1%d@, + il=\E[%p1%dL, + il1=\E[L, + ind=^J, + invis=\E[8m, + is2=\E[!p\E[?3;4l\E[4l\E>, + kbs=^H, + kdch1=\E[3~, + mc0=\E[i, + mc4=\E[4i, + mc5=\E[5i, + meml=\El, + memu=\Em, + op=\E[39;49m, + rc=\E8, + rev=\E[7m, + ri=\EM, + rmacs=\E(B, + rmam=\E[?7l, + rmcup=\E[?1049l, + rmir=\E[4l, + rmkx=\E[?1l\E>, + rmso=\E[27m, + rmul=\E[24m, + rs1=\Ec, + rs2=\E[!p\E[?3;4l\E[4l\E>, + sc=\E7, + setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, + setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, + setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, + sgr0=\E[m\E(B, + smacs=\E(0, + smam=\E[?7h, + smcup=\E[?1049h, + smir=\E[4h, + smkx=\E[?1h\E=, + smso=\E[7m, + smul=\E[4m, + tbc=\E[3g, + u6=\E[%i%d;%dR, + u7=\E[6n, + u8=\E[?1;2c, + u9=\E[c, + vpa=\E[%i%p1%dd, +# +# The xterm-new description has all of the features, but is not completely +# compatible with vt220. If you are using a Sun or PC keyboard, set the +# sunKeyboard resource to true: +# + maps the editing keypad +# + interprets control-function-key as a second array of keys, so a +# 12-fkey keyboard can support vt220's 20-fkeys. +# + maps numeric keypad "+" to ",". +# + uses DEC-style control sequences for the application keypad. +# +# Some packagers modify xterm's resource definitions to provide extra function +# keys by using the shift-modifier in the translations resource. However, that +# interferes with the DECUDK functionality. +# +xterm-vt220|xterm emulating vt220, + ka1=\EOw, + ka3=\EOy, + kb2=\EOu, + kc1=\EOq, + kc3=\EOs, + kcbt=\E[Z, + kcub1=\EOD, + kcud1=\EOB, + kcuf1=\EOC, + kcuu1=\EOA, + kend=\E[4~, + kent=\EOM, + kf1=\EOP, + kf10=\E[21~, + kf11=\E[23~, + kf12=\E[24~, + kf13=\E[25~, + kf14=\E[26~, + kf15=\E[28~, + kf16=\E[29~, + kf17=\E[31~, + kf18=\E[32~, + kf19=\E[33~, + kf2=\EOQ, + kf20=\E[34~, + kf3=\EOR, + kf4=\EOS, + kf5=\E[15~, + kf6=\E[17~, + kf7=\E[18~, + kf8=\E[19~, + kf9=\E[20~, + khome=\E[1~, + kich1=\E[2~, + kmous=\E[M, + knp=\E[6~, + kpp=\E[5~, + use=xterm-basic, +# +xterm-vt52|xterm emulating dec vt52, + cols#80, + it#8, + lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, + clear=\EH\EJ, + cr=^M, + cub1=\ED, + cud1=\EB, + cuf1=\EC, + cup=\EY%p1%' '%+%c%p2%' '%+%c, + cuu1=\EA, + ed=\EJ, + el=\EK, + home=\EH, + ht=^I, + ind=^J, + kbs=^H, + kcub1=\ED, + kcud1=\EB, + kcuf1=\EC, + kcuu1=\EA, + nel=^M^J, + ri=\EI, + rmacs=\EG, + smacs=\EF, +# +# kf30-kf45 are keysyms XK_R1 through XK_R15 on the Sun keyboard. +xterm-sun|xterm with sun function keys, + kb2=\E[218z, + kcpy=\E[197z, + kcub1=\EOD, + kcud1=\EOB, + kcuf1=\EOC, + kcuu1=\EOA, + kdch1=\177, + kend=\E[220z, + kent=\EOM, + kf1=\E[224z, + kf10=\E[233z, + kf11=\E[192z, + kf12=\E[193z, + kf13=\E[194z, + kf14=\E[195z, + kf15=\E[196z, + kf17=\E[198z, + kf18=\E[199z, + kf19=\E[200z, + kf2=\E[225z, + kf20=\E[201z, + kf3=\E[226z, + kf31=\E[208z, + kf32=\E[209z, + kf33=\E[210z, + kf34=\E[211z, + kf35=\E[212z, + kf36=\E[213z, + kf38=\E[215z, + kf4=\E[227z, + kf40=\E[217z, + kf42=\E[219z, + kf44=\E[221z, + kf5=\E[228z, + kf6=\E[229z, + kf7=\E[230z, + kf8=\E[231z, + kf9=\E[232z, + kfnd=\E[200z, + khlp=\E[196z, + khome=\E[214z, + kich1=\E[2z, + kmous=\E[M, + knp=\E[222z, + kpp=\E[216z, + kund=\E[195z, + use=xterm-basic, +# +xterm-hp|xterm with hpterm function keys, + kclr=\EJ, + kcub1=\ED, + kcud1=\EB, + kcuf1=\EC, + kcuu1=\EA, + kdch1=\EP, + kend=\EF, + kf1=\Ep, + kf2=\Eq, + kf3=\Er, + kf4=\Es, + kf5=\Et, + kf6=\Eu, + kf7=\Ev, + kf8=\Ew, + khome=\Eh, + kich1=\EQ, + knp=\ES, + kpp=\ET, + use=xterm-basic, +xterm-sco|xterm with SCO function keys, + kcub1=\E[D, + kcud1=\E[B, + kcuf1=\E[C, + kcuu1=\E[A, + kend=\E[F, + kf1=\E[M, + kf10=\E[V, + kf11=\E[W, + kf12=\E[X, + kf13=\E[Y, + kf15=\E[a, + kf16=\E[b, + kf17=\E[c, + kf18=\E[d, + kf19=\E[e, + kf2=\E[N, + kf20=\E[f, + kf21=\E[g, + kf22=\E[h, + kf23=\E[i, + kf24=\E[j, + kf25=\E[k, + kf26=\E[l, + kf27=\E[m, + kf28=\E[n, + kf29=\E[o, + kf3=\E[O, + kf30=\E[p, + kf31=\E[q, + kf32=\E[r, + kf33=\E[s, + kf34=\E[t, + kf35=\E[u, + kf4=\E[P, + kf5=\E[Q, + kf6=\E[R, + kf7=\E[S, + kf8=\E[T, + kf9=\E[U, + khome=\E[H, + kich1=\E[L, + knp=\E[G, + kpp=\E[I, + use=xterm-basic, +# +# Other variants: +xterm-24|xterms|vs100|xterm terminal emulator (X Window System), + lines#24, + use=xterm, +xterm-65|xterm with tall window 65x80 (X Window System), + lines#65, + use=xterm, +xterm-bold|xterm with bold instead of underline (X Window System), + smso=\E[7m, + smul=\E[1m, + use=xterm, +xterm-boldso|xterm with bold for standout (X Window System), + rmso=\E[m, + smso=\E[1m, + use=xterm, +xterm-mono|monochrome xterm, + bce@, + colors@, + ncv@, + pairs@, + op@, + setab@, + setaf@, + setb@, + setf@, + sgr@, + use=xterm, +# +# VTxxx terminals are usually set up so that full-screen applications will use +# the cursor application mode strings. This is good for full-screen +# applications, including legacy applications which may have hard-coded +# behavior, but bad for interactive shells (e.g., tcsh, bash) which use arrow +# keys to scroll through a history of command strings. +# +# To see the difference between normal/application modes, consider this example: +# + In normal (non-application) mode, the terminal transmits a down-arrow +# as \E[C, which happens to echo as a down-arrow. +# + In application mode the terminal transmits \EOC, which echoes as C. +# That is because the \EO is the SS3 control, which says to use the +# character from the G3 character set for the next cell. +# +# One example of hard-coded behavior would be for applications written to work +# with VT52 and VT100 terminals. If the application's parser ignores 'O' and +# '?' characters after the escape, then the cursor and keypad strings for the +# two terminals are the same. (Indeed, one of the first curses applications +# which I used did something like this to cover "ANSI" terminals -TD). +# +# To make this work (leaving the cursor keys in normal mode), we have to adjust +# the terminal initialization sequences: +# +# smkx/rmkx set/reset the cursor and keypad application modes. We retain +# the latter (otherwise many applications fail). +# +# smcup/rmcup set/restore cursor-addressing mode for full-screen +# applications. For xterm, this normally means the alternate +# screen, which is not compatible with interactive shells. Some +# programs are "smart" and disable these. +# +xterm-noapp|xterm with cursor keys in normal mode, + kcub1=\E[D, + kcud1=\E[B, + kcuf1=\E[C, + kcuu1=\E[A, + rmcup@, + rmkx=\E>, + smcup@, + smkx=\E=, + use=xterm, +# +# This should work for the commonly used "color xterm" variations (XFree86 +# xterm, color_xterm, nxterm, rxvt). Note that it does not set 'bce', so for +# XFree86 and and rxvt, some applications that use colors will be less +# efficient, and in a few special cases (with "smart" optimization) the wrong +# color will be painted in spots. +xterm-color|generic "ANSI" color xterm (X Window System), + colors#8, + ncv@, + pairs#64, + op=\E[m, + setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, + use=xterm-r6, +# +# vi may work better with this entry, because vi +# doesn't use insert mode much +xterm-ic|xterm-vi|xterm with insert character instead of insert mode, + mir@, + ich=\E[%p1%d@, + ich1=\E[@, + rmir@, + smir@, + use=xterm, +# +# This is used only for testing (it's not relevant to DEC VTxxx terminals, but +# to ncurses). +xterm-xmc|xterm with magic-cookie glitch, + xmc#1, + use=xterm-new, +# +# This one also is primarily for testing ncurses; while the ISO 6429 defines +# the REP control, none of the DEC VTxxx terminals (VT52 through VT420) support +# it. +xterm-rep|xterm with repeat-character control, + rep=%p1%c\E[%p2%{1}%-%db, + use=xterm-new, +# +# This is mainly for testing xterm; the real VT220 will not let you switch +# character sets without first altering the keyboard language in the setup +# screen. Some emulators allow this anyway. (Note that these strings are +# normally used only for printers). The parameter to csnm and scs is the same +# in both cases: the keyboard language parameter returned by CSI ? 2 6 n. +xterm-nrc|xterm with VT220 national replacement character sets, + csnm=%?%p1%{1}%=%tNorth American%e%p1%{2}%=%tBritish%e%p1%{3}%=%tFlemish%e%p1%{4}%=%tFrench Canadian%e%p1%{5}%=%tDanish%e%p1%{6}%=%tFinnish%e%p1%{7}%=%tGerman%e%p1%{8}%=%tDutch%e%p1%{9}%=%tItalian%e%p1%{10}%=%tSwiss (French)%e%p1%{11}%=%tSwiss (German)%e%p1%{12}%=%tSwedish%e%p1%{13}%=%tNorwegian%e%p1%{14}%=%tFrench/Belgian%e%p1%{15}%=%tSpanish%;, + scs=%?%p1%{1}%=%t\E(B%e%p1%{2}%=%t\E(A%e%p1%{3}%=%t\E(R%e%p1%{4}%=%t\E(9%e%p1%{5}%=%t\E(E%e%p1%{6}%=%t\E(5%e%p1%{7}%=%t\E(K%e%p1%{8}%=%t\E(4%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(=%e%p1%{11}%=%t\E(=%e%p1%{12}%=%t\E(7%e%p1%{13}%=%t\E(E%e%p1%{14}%=%t\E(R%e%p1%{15}%=%t\E(Z%;, + use=xterm-new, +# +# Foreground 0-15 maps (with toggles) into 30-37 & 90-97 +# Background 0-15 maps (with toggles) into 40-47 & 100-107 +# +# Originally I suppressed setaf/setab, since ANSI specifies only 8 colors, but +# Stephen Marley persuaded me to allow the "ANSI" color controls to extend to +# 16 colors. (Note that ncurses 4.2 uses setf/setb from this description; +# however 5.0 selects either according to their availability). - T.Dickey +# +# SVr4 curses does not use more than 8 colors anyway, so using 16 colors is +# either for terminfo-level applications or via ncurses. +xterm-16color|xterm with 16 colors, + colors#16, + ncv#32, + pairs#256, + setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm, + setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm, + setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, + setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, + use=xterm-new, +# +# This uses RGB values 0..1000 +# +# 256 colors should give 65536 pairs, but terminfo stores numbers in a signed +# short. Most people will not notice problems with only 32767 pairs. +xterm-256color|xterm with 256 colors, + ccc, + colors#256, + pairs#32767, + initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, + setab=\E[48;5;%p1%dm, + setaf=\E[38;5;%p1%dm, + setb=\E[48;5;%p1%dm, + setf=\E[38;5;%p1%dm, + use=xterm-new, +xterm-88color|xterm with 88 colors, + colors#88, + pairs#7744, + use=xterm-256color, +# +# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color. +# To use it, your decTerminalID resource must be set to 200 or above, and the +# sunKeyboard resource set to true. +# +# HTS \E H \210 +# RI \E M \215 +# SS3 \E O \217 +# CSI \E [ \233 +# +xterm-8bit|xterm terminal emulator with 8-bit controls (X Window System), + am, + bce, + km, + mc5i, + mir, + msgr, + npc, + xenl, + colors#8, + cols#80, + it#8, + lines#24, + pairs#64, + acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, + blink=\2335m, + bold=\2331m, + cbt=\233Z, + civis=\233?25l, + clear=\233H\2332J, + cnorm=\233?25l\233?25h, + cr=^M, + csr=\233%i%p1%d;%p2%dr, + cub=\233%p1%dD, + cub1=^H, + cud=\233%p1%dB, + cud1=^J, + cuf=\233%p1%dC, + cuf1=\233C, + cup=\233%i%p1%d;%p2%dH, + cuu=\233%p1%dA, + cuu1=\233A, + cvvis=\233?12;25h, + dch=\233%p1%dP, + dch1=\233P, + dl=\233%p1%dM, + dl1=\233M, + ech=\233%p1%dX, + ed=\233J, + el=\233K, + el1=\2331K, + flash=\233?5h$<100/>\233?5l, + home=\233H, + hpa=\233%i%p1%dG, + ht=^I, + hts=\210, + ich=\233%p1%d@, + il=\233%p1%dL, + il1=\233L, + ind=^J, + invis=\2338m, + is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8, + ka1=\217w, + ka3=\217u, + kb2=\217y, + kbeg=\217E, + kbs=^H, + kc1=\217q, + kc3=\217s, + kcbt=\233Z, + kcub1=\217D, + kcud1=\217B, + kcuf1=\217C, + kcuu1=\217A, + kdch1=\2333~, + kend=\2334~, + kent=\217M, + kf1=\23311~, + kf10=\23321~, + kf11=\23323~, + kf12=\23324~, + kf13=\23325~, + kf14=\23326~, + kf15=\23328~, + kf16=\23329~, + kf17=\23331~, + kf18=\23332~, + kf19=\23333~, + kf2=\23312~, + kf20=\23334~, + kf3=\23313~, + kf4=\23314~, + kf5=\23315~, + kf6=\23317~, + kf7=\23318~, + kf8=\23319~, + kf9=\23320~, + khome=\2331~, + kich1=\2332~, + kmous=\233M, + knp=\2336~, + kpp=\2335~, + mc0=\233i, + mc4=\2334i, + mc5=\2335i, + meml=\El, + memu=\Em, + op=\23339;49m, + rc=\E8, + rev=\2337m, + ri=\215, + rmacs=\E(B, + rmam=\233?7l, + rmcup=\233?1049l, + rmir=\2334l, + rmkx=\233?1l\E>, + rmso=\23327m, + rmul=\23324m, + rs1=\Ec, + rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8, + sc=\E7, + setab=\2334%p1%dm, + setaf=\2333%p1%dm, + setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, + setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, + sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, + sgr0=\233m\E(B, + smacs=\E(0, + smam=\233?7h, + smcup=\233?1049h, + smir=\2334h, + smkx=\233?1h\E=, + smso=\2337m, + smul=\2334m, + tbc=\2333g, + u6=\233[%i%d;%dR, + u7=\E[6n, + u8=\233[?1;2c, + u9=\E[c, + vpa=\233%i%p1%dd, +# +# Compatible with the R6 xterm, with the following changes: +# + added acsc (perhaps some versions of tic assume the standard vt100 +# alternate character set) +# + added u6, u7, u8, u9 strings for Daniel Weaver's tack program. +# + added kmous string for ncurses. +# + added khome/kend strings (which conflict with kfnd/kslt, see note). +xterm-r6|xterm-old|xterm X11R6 version, + am, + km, + mir, + msgr, + xenl, + cols#80, + it#8, + lines#24, + acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, + blink@, + bold=\E[1m, + clear=\E[H\E[2J, + cr=^M, + csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, + cub1=^H, + cud=\E[%p1%dB, + cud1=^J, + cuf=\E[%p1%dC, + cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, + cuu1=\E[A, + dch=\E[%p1%dP, + dch1=\E[P, + dl=\E[%p1%dM, + dl1=\E[M, + ed=\E[J, + el=\E[K, + enacs=\E)0, + home=\E[H, + ht=^I, + il=\E[%p1%dL, + il1=\E[L, + ind=^J, + is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, + kbs=^H, + kcub1=\EOD, + kcud1=\EOB, + kcuf1=\EOC, + kcuu1=\EOA, + kdch1=\177, + kend=\E[4~, + kf1=\E[11~, + kf10=\E[21~, + kf11=\E[23~, + kf12=\E[24~, + kf13=\E[25~, + kf14=\E[26~, + kf15=\E[28~, + kf16=\E[29~, + kf17=\E[31~, + kf18=\E[32~, + kf19=\E[33~, + kf2=\E[12~, + kf20=\E[34~, + kf3=\E[13~, + kf4=\E[14~, + kf5=\E[15~, + kf6=\E[17~, + kf7=\E[18~, + kf8=\E[19~, + kf9=\E[20~, + khome=\E[1~, + kich1=\E[2~, + kmous=\E[M, + knp=\E[6~, + kpp=\E[5~, + meml=\El, + memu=\Em, + rc=\E8, + rev=\E[7m, + ri=\EM, + rmacs=^O, + rmcup=\E[2J\E[?47l\E8, + rmir=\E[4l, + rmkx=\E[?1l\E>, + rmso=\E[m, + rmul=\E[m, + rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, + sc=\E7, + sgr0=\E[m, + smacs=^N, + smcup=\E7\E[?47h, + smir=\E[4h, + smkx=\E[?1h\E=, + smso=\E[7m, + smul=\E[4m, + tbc=\E[3g, + u6=\E[%i%d;%dR, + u7=\E[6n, + u8=\E[?1;2c, + u9=\E[c, +# +# Compatible with the R5 xterm, with the following changes: +# + changed 'blink=@', to 'blink@' (the former meant that "@" would start +# a blink, the latter that it is not supported). +# + changed kf1 through kf4 to correspond with actual usage. Though X +# supports keypad symbols for PF1 to PF4, and xterm interprets these +# correctly, the F1 to F4 codes are commonly (but incorrectly) used. +# + moved reset string from rs1 to rs2, to correlate better with termcap. +# + make khome consistent with other entries. +# + use rmul/smul, rmir/smir from termcap, but not rmcup/smcup because +# not everyone wants the alternate screen. +# + added u6, u7, u8, u9 strings for Daniel Weaver's tack program. +# + added kmous string for ncurses. +xterm-r5|xterm R5 version, + am, + km, + msgr, + xenl, + cols#80, + it#8, + lines#24, + bel=^G, + blink@, + bold=\E[1m, + clear=\E[H\E[2J, + cr=^M, + csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, + cub1=^H, + cud=\E[%p1%dB, + cud1=^J, + cuf=\E[%p1%dC, + cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, + cuu1=\E[A, + dch=\E[%p1%dP, + dch1=\E[P, + dl=\E[%p1%dM, + dl1=\E[M, + ed=\E[J, + el=\E[K, + home=\E[H, + ht=^I, + hts=\EH, + ich=\E[%p1%d@, + ich1=\E[@, + il=\E[%p1%dL, + il1=\E[L, + ind=^J, + kbs=^H, + kcub1=\EOD, + kcud1=\EOB, + kcuf1=\EOC, + kcuu1=\EOA, + kdch1=\177, + kdl1=\E[31~, + kel=\E[8~, + kend=\E[4~, + kf0=\EOq, + kf1=\E[11~, + kf10=\E[21~, + kf11=\E[23~, + kf12=\E[24~, + kf2=\E[12~, + kf3=\E[13~, + kf4=\E[14~, + kf5=\E[15~, + kf6=\E[17~, + kf7=\E[18~, + kf8=\E[19~, + kf9=\E[20~, + khome=\E[1~, + kich1=\E[2~, + kil1=\E[30~, + kmous=\E[M, + knp=\E[6~, + kpp=\E[5~, + rc=\E8, + rev=\E[7m, + ri=\EM, + rmir=\E[4l, + rmkx=\E[?1l\E>, + rmso=\E[m, + rmul=\E[m, + rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H, + sc=\E7, + sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, + sgr0=\E[m, + smir=\E[4h, + smkx=\E[?1h\E=, + smso=\E[7m, + smul=\E[4m, + tbc=\E[3g, + u6=\E[%i%d;%dR, + u7=\E[6n, + u8=\E[?1;2c, + u9=\E[c, +# +# Customization begins here. +xterm-xfree86|xterm terminal emulator (XFree86), + use=xterm-new, +# +# This is the only entry which you should have to customize, since "xterm" +# is widely used for a variety of incompatible terminal emulations including +# color_xterm and rxvt. +xterm|X11 terminal emulator, + use=xterm-new, +# use=xterm-r6, |