1 files changed, 483 insertions, 0 deletions
diff --git a/nxcomp/GenericChannel.cpp b/nxcomp/GenericChannel.cpp
new file mode 100755
index 000000000..689a99070
--- /dev/null
+++ b/nxcomp/GenericChannel.cpp
@@ -0,0 +1,483 @@
+/**************************************************************************/
+/*                                                                        */
+/* Copyright (c) 2001, 2007 NoMachine, http://www.nomachine.com/.         */
+/*                                                                        */
+/* NXCOMP, NX protocol compression and NX extensions to this software     */
+/* are copyright of NoMachine. Redistribution and use of the present      */
+/* software is allowed according to terms specified in the file LICENSE   */
+/* which comes in the source distribution.                                */
+/*                                                                        */
+/* Check http://www.nomachine.com/licensing.html for applicability.       */
+/*                                                                        */
+/* NX and NoMachine are trademarks of NoMachine S.r.l.                    */
+/*                                                                        */
+/* All rights reserved.                                                   */
+/*                                                                        */
+/**************************************************************************/
+
+#include <sys/types.h>
+#include <sys/socket.h>
+
+#include "GenericChannel.h"
+
+#include "EncodeBuffer.h"
+#include "DecodeBuffer.h"
+
+#include "StaticCompressor.h"
+
+#include "Statistics.h"
+#include "Proxy.h"
+
+extern Proxy *proxy;
+
+//
+// Set the verbosity level.
+//
+
+#define PANIC
+#define WARNING
+#undef  TEST
+#undef  DEBUG
+
+//
+// Log the important tracepoints related
+// to writing packets to the peer proxy.
+//
+
+#undef  FLUSH
+
+//
+// Define this to log when a channel
+// is created or destroyed.
+//
+
+#undef  REFERENCES
+
+//
+// Here are the static members.
+//
+
+#ifdef REFERENCES
+
+int GenericChannel::references_ = 0;
+
+#endif
+
+GenericChannel::GenericChannel(Transport *transport, StaticCompressor *compressor)
+
+  : Channel(transport, compressor), readBuffer_(transport_, this)
+{
+  #ifdef REFERENCES
+  *logofs << "GenericChannel: Created new object at " 
+          << this << " for FD#" << fd_ << " out of " 
+          << ++references_ << " allocated channels.\n"
+          << logofs_flush;
+  #endif
+}
+
+GenericChannel::~GenericChannel()
+{
+  #ifdef REFERENCES
+  *logofs << "GenericChannel: Deleted object at " 
+          << this << " for FD#" << fd_ << " out of "
+          << --references_ << " allocated channels.\n"
+          << logofs_flush;
+  #endif
+}
+
+//
+// Beginning of handleRead().
+//
+
+int GenericChannel::handleRead(EncodeBuffer &encodeBuffer, const unsigned char *message,
+                                   unsigned int length)
+{
+  #ifdef TEST
+  *logofs << "handleRead: Called for FD#" << fd_
+          << " with " << encodeBuffer.getLength()
+          << " bytes already encoded.\n"
+          << logofs_flush;
+  #endif
+
+  //
+  // Pointer to located message and
+  // its size in bytes.
+  //
+
+  const unsigned char *inputMessage;
+  unsigned int inputLength;
+
+  //
+  // Tag message as generic data in compression
+  // routine. Opcode is not actually transferred
+  // over the network.
+  //
+
+  unsigned char inputOpcode = X_NXInternalGenericData;
+
+  #if defined(TEST) || defined(INFO)
+  *logofs << "handleRead: Trying to read from FD#"
+          << fd_ << " at " << strMsTimestamp() << ".\n"
+          << logofs_flush;
+  #endif
+
+  int result = readBuffer_.readMessage();
+
+  #ifdef DEBUG
+  *logofs << "handleRead: Read result on FD#" << fd_
+          << " is " << result << ".\n"
+          << logofs_flush;
+  #endif
+
+  if (result < 0)
+  {
+    //
+    // Let the proxy close the channel.
+    //
+
+    return -1;
+  }
+  else if (result == 0)
+  {
+    #if defined(TEST) || defined(INFO)
+
+    *logofs << "handleRead: PANIC! No data read from FD#"
+            << fd_ << " while encoding messages.\n"
+            << logofs_flush;
+
+    HandleCleanup();
+
+    #endif
+
+    return 0;
+  }
+
+  #if defined(TEST) || defined(INFO) || defined(FLUSH)
+  *logofs << "handleRead: Encoding messages for FD#" << fd_
+          << " with " << readBuffer_.getLength() << " bytes "
+          << "in the buffer.\n" << logofs_flush;
+  #endif
+
+  //
+  // Divide the available data in multiple
+  // messages and encode them one by one.
+  //
+
+  if (proxy -> handleAsyncSwitch(fd_) < 0)
+  {
+    return -1;
+  }
+
+  while ((inputMessage = readBuffer_.getMessage(inputLength)) != NULL)
+  {
+    encodeBuffer.encodeValue(inputLength, 32, 14);
+
+    if (isCompressed() == 1)
+    {
+      unsigned int compressedDataSize = 0;
+      unsigned char *compressedData   = NULL;
+
+      if (handleCompress(encodeBuffer, inputOpcode, 0,
+                             inputMessage, inputLength, compressedData,
+                                 compressedDataSize) < 0)
+      {
+        return -1;
+      }
+    }
+    else
+    {
+      encodeBuffer.encodeMemory(inputMessage, inputLength);
+    }
+
+    int bits = encodeBuffer.diffBits();
+
+    #if defined(TEST) || defined(OPCODES)
+    *logofs << "handleRead: Handled generic data for FD#" << fd_
+            << ". " << inputLength << " bytes in, " << bits << " bits ("
+            << ((float) bits) / 8 << " bytes) out.\n" << logofs_flush;
+    #endif
+
+    addProtocolBits(inputLength << 3, bits);
+
+    if (isPrioritized() == 1)
+    {
+      priority_++;
+    }
+
+  } // End of while ((inputMessage = readBuffer_.getMessage(inputLength)) != NULL) ...
+
+  //
+  // All data has been read from the read buffer.
+  // We still need to mark the end of the encode
+  // buffer just before sending the frame. This
+  // allows us to accomodate multiple reads in
+  // a single frame.
+  //
+
+  if (priority_ > 0)
+  {
+    #if defined(TEST) || defined(INFO)
+    *logofs << "handleRead: WARNING! Requesting flush "
+            << "because of " << priority_ << " prioritized "
+            << "messages for FD#" << fd_ << ".\n"
+            << logofs_flush;
+    #endif
+
+    if (proxy -> handleAsyncPriority() < 0)
+    {
+      return -1;
+    }
+
+    //
+    // Reset the priority flag.
+    //
+
+    priority_ = 0;
+  }
+
+  //
+  // Flush if we produced enough data.
+  //
+
+  if (proxy -> canAsyncFlush() == 1)
+  {
+    #if defined(TEST) || defined(INFO)
+    *logofs << "handleRead: WARNING! Requesting flush "
+            << "because of enough data or timeout on the "
+            << "proxy link.\n" << logofs_flush;
+    #endif
+
+    if (proxy -> handleAsyncFlush() < 0)
+    {
+      return -1;
+    }
+  }
+
+  #if defined(TEST) || defined(INFO)
+
+  if (transport_ -> pending() != 0 ||
+          readBuffer_.checkMessage() != 0)
+  {
+    *logofs << "handleRead: PANIC! Buffer for X descriptor FD#"
+            << fd_ << " has " << transport_ -> pending()
+            << " bytes to read.\n" << logofs_flush;
+
+    HandleCleanup();
+  }
+
+  #endif
+
+  //
+  // Reset the read buffer.
+  //
+
+  readBuffer_.fullReset();
+
+  return 1;
+}
+
+//
+// End of handleRead().
+//
+
+//
+// Beginning of handleWrite().
+//
+
+int GenericChannel::handleWrite(const unsigned char *message, unsigned int length)
+{
+  #ifdef TEST
+  *logofs << "handleWrite: Called for FD#" << fd_ << ".\n" << logofs_flush;
+  #endif
+
+  //
+  // Create the buffer from which to 
+  // decode messages.
+  //
+
+  DecodeBuffer decodeBuffer(message, length);
+
+  #if defined(TEST) || defined(INFO) || defined(FLUSH)
+  *logofs << "handleWrite: Decoding messages for FD#" << fd_
+          << " with " << length << " bytes in the buffer.\n"
+          << logofs_flush;
+  #endif
+
+  unsigned char *outputMessage;
+  unsigned int outputLength;
+
+  //
+  // Tag message as generic data
+  // in decompression.
+  //
+
+  unsigned char outputOpcode = X_NXInternalGenericData;
+
+  for (;;)
+  {
+    decodeBuffer.decodeValue(outputLength, 32, 14);
+
+    if (outputLength == 0)
+    {
+      break;
+    }
+
+    if (isCompressed() == 1)
+    {
+      if (writeBuffer_.getAvailable() < outputLength ||
+              (int) outputLength >= control -> TransportFlushBufferSize)
+      {
+        #ifdef DEBUG
+        *logofs << "handleWrite: Using scratch buffer for "
+                << "generic data with size " << outputLength << " and "
+                << writeBuffer_.getLength() << " bytes in buffer.\n"
+                << logofs_flush;
+        #endif
+
+        outputMessage = writeBuffer_.addScratchMessage(outputLength);
+      }
+      else
+      {
+        outputMessage = writeBuffer_.addMessage(outputLength);
+      }
+
+      const unsigned char *compressedData = NULL;
+      unsigned int compressedDataSize = 0;
+
+      int decompressed = handleDecompress(decodeBuffer, outputOpcode, 0,
+                                              outputMessage, outputLength, compressedData,
+                                                  compressedDataSize);
+      if (decompressed < 0)
+      {
+        return -1;
+      }
+    }
+    else
+    {
+      #ifdef DEBUG
+      *logofs << "handleWrite: Using scratch buffer for "
+              << "generic data with size " << outputLength << " and "
+              << writeBuffer_.getLength() << " bytes in buffer.\n"
+              << logofs_flush;
+      #endif
+
+      writeBuffer_.addScratchMessage((unsigned char *)
+                       decodeBuffer.decodeMemory(outputLength), outputLength);
+    }
+
+    #if defined(TEST) || defined(OPCODES)
+    *logofs << "handleWrite: Handled generic data for FD#" << fd_
+            << ". "  << outputLength << " bytes out.\n"
+            << logofs_flush;
+    #endif
+
+    handleFlush(flush_if_needed);
+  }
+
+  //
+  // Write any remaining data to socket.
+  //
+
+  if (handleFlush(flush_if_any) < 0)
+  {
+    return -1;
+  }
+
+  return 1;
+}
+
+//
+// End of handleWrite().
+//
+
+//
+// Other members.
+//
+
+int GenericChannel::handleCompletion(EncodeBuffer &encodeBuffer)
+{
+  //
+  // Add the bits telling to the remote
+  // that all data in the frame has been
+  // encoded.
+  //
+
+  if (encodeBuffer.getLength() > 0)
+  {
+    #if defined(TEST) || defined(INFO)
+    *logofs << "handleCompletion: Writing completion bits with "
+            << encodeBuffer.getLength() << " bytes encoded "
+            << "for FD#" << fd_ << ".\n" << logofs_flush;
+    #endif
+
+    encodeBuffer.encodeValue(0, 32, 14);
+
+    return 1;
+  }
+  #if defined(TEST) || defined(INFO)
+  else
+  {
+    *logofs << "handleCompletion: PANIC! No completion to write "
+            << "for FD#" << fd_ << ".\n" << logofs_flush;
+
+    HandleCleanup();
+  }
+  #endif
+
+  return 0;
+}
+
+int GenericChannel::handleConfiguration()
+{
+  #ifdef TEST
+  *logofs << "GenericChannel: Setting new buffer parameters.\n"
+          << logofs_flush;
+  #endif
+
+  readBuffer_.setSize(control -> GenericInitialReadSize,
+                          control -> GenericMaximumBufferSize);
+
+  writeBuffer_.setSize(control -> TransportGenericBufferSize,
+                           control -> TransportGenericBufferThreshold,
+                               control -> TransportMaximumBufferSize);
+
+  transport_ -> setSize(control -> TransportGenericBufferSize,
+                            control -> TransportGenericBufferThreshold,
+                                control -> TransportMaximumBufferSize);
+
+  return 1;
+}
+
+int GenericChannel::handleFinish()
+{
+  #ifdef TEST
+  *logofs << "GenericChannel: Finishing channel for FD#"
+          << fd_ << ".\n" << logofs_flush;
+  #endif
+
+  congestion_ = 0;
+  priority_   = 0;
+
+  finish_ = 1;
+
+  transport_ -> fullReset();
+
+  return 1;
+}
+
+int GenericChannel::setReferences()
+{
+  #ifdef TEST
+  *logofs << "GenericChannel: Initializing the static "
+          << "members for the generic channels.\n"
+          << logofs_flush;
+  #endif
+
+  #ifdef REFERENCES
+
+  references_ = 0;
+
+  #endif
+
+  return 1;
+}