diff options
Diffstat (limited to 'nxcomp/NXalert.h')
| -rwxr-xr-x | nxcomp/NXalert.h | 268 |
1 files changed, 268 insertions, 0 deletions
diff --git a/nxcomp/NXalert.h b/nxcomp/NXalert.h new file mode 100755 index 000000000..94758dbea --- /dev/null +++ b/nxcomp/NXalert.h @@ -0,0 +1,268 @@ +/**************************************************************************/ +/* */ +/* Copyright (c) 2001, 2007 NoMachine, http://www.nomachine.com/. */ +/* */ +/* NXCOMP, NX protocol compression and NX extensions to this software */ +/* are copyright of NoMachine. Redistribution and use of the present */ +/* software is allowed according to terms specified in the file LICENSE */ +/* which comes in the source distribution. */ +/* */ +/* Check http://www.nomachine.com/licensing.html for applicability. */ +/* */ +/* NX and NoMachine are trademarks of NoMachine S.r.l. */ +/* */ +/* All rights reserved. */ +/* */ +/**************************************************************************/ + +#ifndef NXalert_H +#define NXalert_H + +#define ALERT_CAPTION_PREFIX "NX - " + +#define INTERNAL_ERROR_ALERT 1 +#define INTERNAL_ERROR_ALERT_TYPE "error" +#define INTERNAL_ERROR_ALERT_STRING \ +"\ +An unrecoverable internal error was detected.\n\ +Press OK to terminate the current session.\n\ +" + +#define CLOSE_DEAD_X_CONNECTION_CLIENT_ALERT 2 +#define CLOSE_DEAD_X_CONNECTION_CLIENT_ALERT_TYPE "yesno" +#define CLOSE_DEAD_X_CONNECTION_CLIENT_ALERT_STRING \ +"\ +One of the applications currently in use is not responding.\n\ +Do you want to terminate the current session?\n\ +" + +#define CLOSE_DEAD_X_CONNECTION_SERVER_ALERT 3 +#define CLOSE_DEAD_X_CONNECTION_SERVER_ALERT_TYPE "yesno" +#define CLOSE_DEAD_X_CONNECTION_SERVER_ALERT_STRING \ +"\ +One of the applications did not behave correctly and caused\n\ +the X server to stop responding in a timely fashion. Do you\n\ +want to terminate the current session?\n\ +" + +#define CLOSE_DEAD_PROXY_CONNECTION_CLIENT_ALERT 4 +#define CLOSE_DEAD_PROXY_CONNECTION_CLIENT_ALERT_TYPE NULL +#define CLOSE_DEAD_PROXY_CONNECTION_CLIENT_ALERT_STRING NULL + +#define CLOSE_DEAD_PROXY_CONNECTION_SERVER_ALERT 5 +#define CLOSE_DEAD_PROXY_CONNECTION_SERVER_ALERT_TYPE "yesno" +#define CLOSE_DEAD_PROXY_CONNECTION_SERVER_ALERT_STRING \ +"\ +No response received from the remote server.\n\ +Do you want to terminate the current session?\n\ +" + +#define RESTART_DEAD_PROXY_CONNECTION_CLIENT_ALERT 6 +#define RESTART_DEAD_PROXY_CONNECTION_CLIENT_ALERT_TYPE NULL +#define RESTART_DEAD_PROXY_CONNECTION_CLIENT_ALERT_STRING NULL + +#define RESTART_DEAD_PROXY_CONNECTION_SERVER_ALERT 7 +#define RESTART_DEAD_PROXY_CONNECTION_SERVER_ALERT_TYPE "yesno" +#define RESTART_DEAD_PROXY_CONNECTION_SERVER_ALERT_STRING \ +"\ +Connection with remote server was shut down. NX will try\n\ +to establish a new server connection. Session could have\n\ +been left in a unusable state. Do you want to terminate\n\ +the session?\n\ +" + +#define CLOSE_UNRESPONSIVE_X_SERVER_ALERT 8 +#define CLOSE_UNRESPONSIVE_X_SERVER_ALERT_TYPE "panic" +#define CLOSE_UNRESPONSIVE_X_SERVER_ALERT_STRING \ +"\ +You pressed the key sequence CTRL+ALT+SHIFT+ESC.\n\ +This is probably because your X server has become\n\ +unresponsive. Session will be terminated in 30\n\ +seconds unless you abort the procedure by pressing\n\ +the Cancel button.\n\ +" + +#define WRONG_PROXY_VERSION_ALERT 9 +#define WRONG_PROXY_VERSION_ALERT_TYPE "ok" +#define WRONG_PROXY_VERSION_ALERT_STRING \ +"\ +Local NX libraries version " VERSION " do not match the NX\n\ +version of the remote server. Please check the error\n\ +log on the server to find out which client version you\n\ +need to install to be able to access this server.\n\ +" + +#define FAILED_PROXY_CONNECTION_CLIENT_ALERT 10 +#define FAILED_PROXY_CONNECTION_CLIENT_ALERT_TYPE NULL +#define FAILED_PROXY_CONNECTION_CLIENT_ALERT_STRING NULL + +#define FAILED_PROXY_CONNECTION_SERVER_ALERT 11 +#define FAILED_PROXY_CONNECTION_SERVER_ALERT_TYPE "yesno" +#define FAILED_PROXY_CONNECTION_SERVER_ALERT_STRING \ +"\ +Could not yet establish the connection to the remote\n\ +proxy. Do you want to terminate the current session?\n\ +" + +#define MISSING_PROXY_CACHE_ALERT 12 +#define MISSING_PROXY_CACHE_ALERT_TYPE "ok" +#define MISSING_PROXY_CACHE_ALERT_STRING \ +"\ +NX was unable to negotiate a cache for this session.\n\ +This may happen if this is the first time you run a\n\ +session on this server or if cache was corrupted or\n\ +produced by an incompatible NX version.\n\ +" + +#define ABORT_PROXY_CONNECTION_ALERT 13 +#define ABORT_PROXY_CONNECTION_ALERT_TYPE "ok" +#define ABORT_PROXY_CONNECTION_ALERT_STRING \ +"\ +The connection with the remote server was shut down.\n\ +Please check the state of your network connection.\n\ +" + +/* + * The one below is a special alert, used to close + * a previous alert that is running on the given + * side. This can be used to get rid of a message + * that has ceased to hold true. + */ + +#define DISPLACE_MESSAGE_ALERT 14 +#define DISPLACE_MESSAGE_ALERT_TYPE NULL +#define DISPLACE_MESSAGE_ALERT_STRING NULL + +/* + * These are the other alert messages that were + * added in the 1.5.0 release. The first is never + * shown and is intended just for testing. + */ + +#define GREETING_MESSAGE_ALERT 15 +#define GREETING_MESSAGE_ALERT_TYPE "ok" +#define GREETING_MESSAGE_ALERT_STRING \ +"\ +Welcome to NX from the NoMachine team. We really\n\ +hope you will enjoy this wonderful software as much\n\ +as we had fun making it ;-).\n\ +" + +/* + * These alerts are intended to notify the user + * of the reason why the agent failed to resume + * the session. + */ + +#define START_RESUME_SESSION_ALERT 16 +#define START_RESUME_SESSION_ALERT_TYPE "ok" +#define START_RESUME_SESSION_ALERT_STRING \ +"\ +You appear to run your NX session across a slow network\n\ +connection. Resuming the session may require some time.\n\ +Please wait.\ +" + +#define FAILED_RESUME_DISPLAY_ALERT 17 +#define FAILED_RESUME_DISPLAY_ALERT_TYPE "error" +#define FAILED_RESUME_DISPLAY_ALERT_STRING \ +"\ +Failed to open the display. Can't resume the NX\n\ +session on this display.\n\ +" + +#define FAILED_RESUME_DISPLAY_BROKEN_ALERT 18 +#define FAILED_RESUME_DISPLAY_BROKEN_TYPE "error" +#define FAILED_RESUME_DISPLAY_BROKEN_STRING \ +"\ +The display connection was broken while trying to\n\ +resume the session. Please, check your network\n\ +connection and try again.\n\ +" + +#define FAILED_RESUME_VISUALS_ALERT 19 +#define FAILED_RESUME_VISUALS_ALERT_TYPE "error" +#define FAILED_RESUME_VISUALS_ALERT_STRING \ +"\ +Failed to restore all the required visuals.\n\ +Can't resume the NX session on this display.\n\ +" + +#define FAILED_RESUME_COLORMAPS_ALERT 20 +#define FAILED_RESUME_COLORMAPS_ALERT_TYPE "error" +#define FAILED_RESUME_COLORMAPS_ALERT_STRING \ +"\ +The number of available colormaps is different\n\ +on the new display. Can't resume the NX session\n\ +on this display.\n\ +" + +#define FAILED_RESUME_PIXMAPS_ALERT 21 +#define FAILED_RESUME_PIXMAPS_ALERT_TYPE "error" +#define FAILED_RESUME_PIXMAPS_ALERT_STRING \ +"\ +Failed to restore all the required pixmap formats.\n\ +Can't resume the NX session on this display.\n\ +" + +#define FAILED_RESUME_DEPTHS_ALERT 22 +#define FAILED_RESUME_DEPTHS_ALERT_TYPE "error" +#define FAILED_RESUME_DEPTHS_ALERT_STRING \ +"\ +Failed to restore all the required screen depths.\n\ +Can't resume the NX session on this display.\n\ +" + +#define FAILED_RESUME_RENDER_ALERT 23 +#define FAILED_RESUME_RENDER_ALERT_TYPE "error" +#define FAILED_RESUME_RENDER_ALERT_STRING \ +"\ +The render extension is missing or an incompatible\n\ +version was detected on your X server. Can't resume\n\ +the NX session on this display.\n\ +" + +#define FAILED_RESUME_FONTS_ALERT 24 +#define FAILED_RESUME_FONTS_ALERT_TYPE "error" +#define FAILED_RESUME_FONTS_ALERT_STRING \ +"\ +One or more of the fonts that are in use by the\n\ +session are missing. Can't resume the NX session\n\ +on this display.\n\ +" + +#define ABORT_PROXY_NEGOTIATION_ALERT 62 +#define ABORT_PROXY_NEGOTIATION_ALERT_TYPE "ok" +#define ABORT_PROXY_NEGOTIATION_ALERT_STRING \ +"\ +The remote proxy closed the connection while negotiating\n\ +the session. This may be due to the wrong authentication\n\ +credentials passed to the server.\n\ +" + +#define ABORT_PROXY_SHUTDOWN_ALERT 64 +#define ABORT_PROXY_SHUTDOWN_ALERT_TYPE "ok" +#define ABORT_PROXY_SHUTDOWN_ALERT_STRING \ +"\ +No response received from the remote proxy while\n\ +waiting for the session shutdown.\n\ +" + +#define FAILED_XDMCP_CONNECTION_ALERT 65 +#define FAILED_XDMCP_CONNECTION_ALERT_TYPE "ok" +#define FAILED_XDMCP_CONNECTION_ALERT_STRING \ +"\ +The XDM host that was contacted by the NX server doesn't\n\ +seem to be able to start the session. Please check your\n\ +server configuration.\n\ +" + +/* + * Used to handle the backward compatibility. + * Update the numbers if you add a new alert. + */ + +#define LAST_PROTO_STEP_6_ALERT 63 +#define LAST_PROTO_STEP_7_ALERT 65 + +#endif /* NXalert_H */ |