aboutsummaryrefslogtreecommitdiff
path: root/nx-X11/programs/Xserver/hw
Commit message (Collapse)AuthorAgeFilesLines
* library-cleanup: Don't build libNX_Xrender anymore. Use system's libXrender ↵Mike Gabriel2016-04-203-3/+640
| | | | shared library.
* Fix c4a3889. Add forgotten file nx-X11/programs/Xserver/Xinerama_nxagent.h.Mike Gabriel2016-01-011-0/+74
|
* Complete changes from commit 0d56c45 in NXpicturestr.h (i.e. add a missing ↵Mike DePaulo2015-12-301-0/+6
| | | | | | | comment). (Fixes ArcticaProject/nx-libs#38). commit 0d56c45 was: nx-X11: handle source pictures (those without a Drawable surface) gracefully.
* Xinerama: do not cut off at outer edgesUlrich Sibiller2015-12-302-3/+77
| | | | | | | | | | | | | | | | | | | | | This fixes the problem Mike Gabriel describes like this: - Launch a session on a system with a single monitor. Enable Xinerama for this session. - Open a desktop session in that session window (e.g. MATE or XFCE). - Move the NX/MATE-or-XFCE session window around on that one monitor. Bump at the borders, so that the session window moves into the invisible parts around your monitor. What you see is that the MATE-or-XFCE window manager will become really busy with resizing the windows and panels in the NX session, because moving the window over the physical borders of the display will trigger resize events. This is non-intuitive, I think. Same with multi-monitors on the outside edges of the physical Xorg RandR setup.
* Provide support for re-enabling Xinerama on session resumptions.Mike Gabriel2015-12-303-3/+36
| | | | | | | | | | | | | | By design, when resuming a session, Xinerama can only be re-enabled by NX option parsing. Thus, this change introduces a "xinerama" NX option that can be loaded via an options file into NX agent when resuming a session. The new xinerame NX session option also allows switching on Xinerama at session startup via an option file. When implementing the new NX Xinerama support into clients (like TheQVD, X2Go Client, etc., this new xinerama NX option should be used for activating Xinerama in the NX / QVD / X2Go session.
* Initialize XRandR based Xinerama extension properly when session is started ↵Mike Gabriel2015-12-301-1/+1
| | | | with "-geometry fullscreen".
* Only declare nxagentRandRCrtcSet if RANDR_12_INTERFACE is defined.Mike Gabriel2015-12-301-0/+2
|
* Screen.c: Rename NX_USE_MODE_PREFIX to NXAGENT_RANDR_MODE_PREFIX, fix ↵Mike Gabriel2015-12-302-3/+4
| | | | unclosed comment.
* Screen.c: restructure xinerama code, much shorter nowUlrich Sibiller2015-12-301-64/+40
|
* Screen.c: Fix freeing of unsued modesUlrich Sibiller2015-12-301-9/+28
|
* Screen.c: improve comments and DEBUG outputUlrich Sibiller2015-12-301-24/+59
|
* Reimplement xinerama via randr in nxagent (not libNX_Xinerama). (Fixes ↵Ulrich Sibiller2015-12-305-71/+452
| | | | | | | | | ArcticaProject/nx-libs#23). No more xinerama faking, just use existing xrandr extension and initalize it properly. Xinerama then works automatically. Fixes ArcticaProject/nx-libs#23
* library clean-up: Don't build libNX_Xinerama anymore. Use system's ↵Mike Gabriel2015-12-301-0/+4
| | | | | | | | | | libXinerama shared library. (Fixes ArcticaProject/nx-libs#49). This commit goes along with a patch from Ulrich Sibiller who managed to move the Xinerama awareness for NX sessions into the Xserver code. This makes Xinerama support for NX in libNX_Xinerama.so obsolete. Fixes ArcticaProject/nx-libs#49
* X11/nx-X11 clear-up: More places where we need to explicitly distinguish ↵Mike Gabriel2015-12-292-2/+2
| | | | between X11 and nx-X11 namespace regarding header include paths.
* libray clean (Xfixes): Provide a fake libXfixes.h header from latest X.Org, ↵Mike Gabriel2015-12-284-3/+93
| | | | that includes headers from our Xlib version. This avoids FTBFS caused by type redefinitions and should really be a temporary measure.
* Xrandr_nxagent.h: When faking Xrandr.h, we better include our own Xfuncproto.h.Mike Gabriel2015-12-281-1/+1
|
* Clear header file namespace separation (<X11/...> vs. <nx-X11/...>).Mike Gabriel2015-12-2829-70/+435
| | | | | | | | | | | | | | | | | | | | In the process of building nxagent against more and more system-wide installed X.org libraries, we come to the limit of including structs from this (bundled nx-X11) and that (system-wide X.Org) library. This commit introduces a clear namespace separation of headers provided by nx-X11 and headers provided by X.Org. This approach is only temporary as we want to drop all nx-X11 bundled libraries from nx-libs. However, for a while we need to make this separation clear and also ship some reduced fake X.Org headers that avoid pulling in libX* and libNX_X* symbols at the same time. This patch has been tested on Debian jessie and unstable and requires no overall testing on various distros and distro versions, as we finally will drop all libNX_X* libraries and build against X.org's client libs. For now, this hack eases our development / cleanup process.
* Replace 'pointer' type with 'void *'Keith Packard2015-12-2843-305/+305
| | | | | | | | | | This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer' is used throughout the X server for other things, and having duplicate names generates compiler warnings. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Eric Anholt <eric@anholt.net> Rebased against NX: Mike Gabriel <mike.gabriel@das-netzwerkteam.de>
* Re-add -sync option back to nxagent to allow synchronous debugging of the ↵Mike Gabriel2015-10-063-0/+12
| | | | nxagent DDX.
* Merge branch 'uli42-pr/backported_fixes' into arctica-3.6.xMihai Moldovan2015-07-0310-2/+50
|\ | | | | | | Attributes GH PR #50: https://github.com/ArcticaProject/nx-libs/pull/50
| * Backport: xserver: Avoid sending uninitialized padding data over the networkPeter Åstrand2015-07-0210-2/+50
| | | | | | | | Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
* | Correct manpages: --help -> -helpMike DePaulo2015-06-282-2/+2
|/ | | | | | | | | | | | | | | xorg-server does not follow the convention of using 2 dashes. Note that --help does produce the help output. However, it produces this additional output after it: Error: Aborting session with 'Unrecognized option: --help'. Session: Aborting session at 'Sun Jun 28 01:35:35 2015'. Session: Session aborted at 'Sun Jun 28 01:35:35 2015'. It also causes a return code of 1 rather than 0. Therefore, we should instruct users to call -help instead.
* Merge pull request #46 from ArcticaProject/pr/Xext-cve-fixesMike Gabriel2015-05-311-0/+20
|\ | | | | Xext CVE fixes in XVideo extension.
| * Xv: unvalidated lengths in XVideo extension swapped procs [CVE-2014-8099]pr/Xext-cve-fixesAlan Coopersmith2015-05-301-0/+20
| | | | | | | | | | | | | | | | | | | | | | v2: backport to nx-libs 3.6.x (Mike DePaulo) v3: port to NXxvdisp.c rather than xvdisp.c (Mike DePaulo) Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Conflicts: Xext/xvdisp.c
* | dix: Allow zero-height PutImage requests (fix for X.Org's CVE-2015-3418).pr/dix-cve-fixesKeith Packard2015-05-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The length checking code validates PutImage height and byte width by making sure that byte-width >= INT32_MAX / height. If height is zero, this generates a divide by zero exception. Allow zero height requests explicitly, bypassing the INT32_MAX check. Fix for regression introduced by fix for CVE-2014-8092. v2: backports to nx-libs 3.6.x (Mike Gabriel) v3: port to NXdispatch.c rather than dispatch.c (Mike DePaulo) Signed-off-by: Keith Packard <keithp@keithp.com>
* | dix: integer overflow in ProcPutImage() [CVE-2014-8092 1/4]Alan Coopersmith2015-05-301-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ProcPutImage() calculates a length field from a width, left pad and depth specified by the client (if the specified format is XYPixmap). The calculations for the total amount of memory the server needs for the pixmap can overflow a 32-bit number, causing out-of-bounds memory writes on 32-bit systems (since the length is stored in a long int variable). v2: backport to nx-libs 3.6.x (Mike DePaulo) v3: port to NXdispatch.c rather than dispatch.c (Mike DePaulo) Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Conflicts: dix/dispatch.c
* | Avoid use-after-free in dix/dixfonts.c: doImageText() [CVE-2013-4396] from ↵Mike DePaulo2015-05-301-0/+5
|/ | | | | | | | | | | | | | | | | | | | | | | xorg/Xserver http://lists.x.org/archives/xorg-announce/2013-October/002332.html Save a pointer to the passed in closure structure before copying it and overwriting the *c pointer to point to our copy instead of the original. If we hit an error, once we free(c), reset c to point to the original structure before jumping to the cleanup code that references *c. Since one of the errors being checked for is whether the server was able to malloc(c->nChars * itemSize), the client can potentially pass a number of characters chosen to cause the malloc to fail and the error path to be taken, resulting in the read from freed memory. Since the memory is accessed almost immediately afterwards, and the X server is mostly single threaded, the odds of the free memory having invalid contents are low with most malloc implementations when not using memory debugging features, but some allocators will definitely overwrite the memory there, leading to a likely crash. v2: Apply to NXdixfonts.c rather than dixfonts.c (Mike DePaulo)
* Merge pull request #36 from ArcticaProject/pr/render-cve-fixesMike Gabriel2015-05-261-2/+18
|\ | | | | XRender CVE fixes for nxagent (X.Org CVE-2014-8100)
| * render: unvalidated lengths in Render extn. swapped procs [CVE-2014-8100 2/2]pr/render-cve-fixesAlan Coopersmith2015-05-241-1/+16
| | | | | | | | | | | | | | | | | | | | | | v2: backport to nx-libs 3.6.x (Mike DePaulo) v3: port to NXrender.c rather than render.c (Mike DePaulo) Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Conflicts: render/render.c
| * render: check request size before reading it [CVE-2014-8100 1/2]Julien Cristau2015-05-241-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise we may be reading outside of the client request. v2: backport to nx-libs 3.6.x (Mike DePaulo) v3: port to NXrender.c rather than render.c (Mike DePaulo) Signed-off-by: Julien Cristau <jcristau@debian.org> Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com> Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com> Conflicts: render/render.c
* | hw/nxagent clean-up: Drop NXrandr.{c|h} client lib copy-of-code from nxagent ↵Mike Gabriel2015-05-204-1033/+3
| | | | | | | | hardware driver.
* | library clean-up: Don't build libNX_Xrandr anymore. Use system's libXrandr ↵Mike Gabriel2015-05-202-2/+2
|/ | | | shared library.
* library clean-up: Don't build and link libXfont.a anymore. Use system's ↵pr/libxfont-cleanupMike Gabriel2015-04-226-28/+13
| | | | libXfont shared library and link dynamically.
* NXAGENT_UPGRADE code cleanup:Mike Gabriel2015-04-1651-38857/+6098
| | | | | | | | | | | NX agent contains/ed two build trees. An old one (probably pre-3.x.y) and a "newer" one. The "newer" code tree used to become enabled by setting NXUpgradeAgentServer in nx-X11/config/cf/host.def to YES. As building the NXUpgradeAgentServer has been the default for years now, we drop all code that does not get used at build time for NXUpgradeAgentServer == YES (i.e., the code that belongs to the pre-3.x.y phase of NX agent).
* imake cleanup: Drop all references to XprtServer and BuildXprint*.Mike Gabriel2015-04-041-0/+3
|
* imake cleanup: Drop all references to XdmxServer and BuildXdmx*.Mike Gabriel2015-04-041-18/+0
|
* imake cleanup: Drop all references to XVirtualFramebufferServer.Mike Gabriel2015-04-041-5/+1
|
* imake cleanup: Drop all references to XNestServer.Mike Gabriel2015-04-041-5/+1
|
* nx-X11: add more NULL guards to TEST and DEBUG sections of Render.c.Mihai Moldovan2015-03-291-65/+90
| | | | Cherry-picked from branch 3.5.0.x.
* library clean-up: Don't build libNX_Xpm anymore. Use system's libXpm shared ↵Mike Gabriel2015-03-031-1/+1
| | | | library.
* Make nxagent process aware of its current NX'ish version.Mike Gabriel2015-02-172-3/+9
| | | | | | | | | | | This feature copies the way how X.Org version string and number are propagated at build time. First use case: if people start nxagent, it reports its version number on stderr. This is about being human-friendly. Second use case: None, so far. But it will now be easy to use the NXAGENT_VERSION_STRING in later feature add-ons.
* nx-X11/programs/Xserver/hw/nxagent/: Drop unused VERSION file.Mike Gabriel2015-02-161-1/+0
|
* VERSION file: master VERSION file is in base folder, symlinked from ↵Mike Gabriel2015-02-141-0/+1
| | | | | | | | | | | | | | | | | | nx*/VERSION and hw/nxagent/VERSION. This commit removes the debian/VERSION file at makes it now unnecessary to copy/symlink the VERSION file at build time. These build scripts got adapted: debian/roll-tarballs.sh debian/rules nx-libs.spec Furthermore, all NX component now use the main VERSION file as reference. typechange: nxcomp/VERSION typechange: nxcompext/VERSION typechange: nxcompshad/VERSION typechange: nxproxy/VERSION
* Unbrand NX Agent Startup Screen / Brand X2Go Agent Startup Screen ↵Oleksandr Shneyder2015-02-134-76/+145
| | | | | | | | | | (999_nxagent_unbrand-nxagent-brand-x2goagent.full.patch). When launched with NX Agent flavour, the startup screen gets unbranded by this patch (the !M logo does not get shown). When launched with X2Go Agent flavour, the startup screen gets branded with the X2GO logo.
* Several fixes for building debug versions of NX ↵Mihai Moldovan2015-02-133-6/+7
| | | | | | | | | | | | | | | | | | (990_fix-DEBUG-and-TEST-builds.full.patch). (1) In nx-X11/programs/Xserver/dix: Fix several compile errors when specifying -DDEBUG globally. Previous GCC versions were more liberal and the code thus compiled. Also initialize/reset a count variable correctly. (2) In nx-X11/programs/Xserver/hw/nxagent/Render.c: Check for pSrc->pDrawable to exist instead of having nxagent segfault when it does not. This enables the possibility of compiling all nxagent modules in TEST mode.
* Adapt paths of keystrokes.cfg if nxagent runs as x2goagent ↵Horst Schirmeier2015-02-131-0/+6
| | | | (321_nxagent_x2go-specific-keystroke-config.full.patch).
* Make nxagent-specific keyboard bindings configurable ↵Alexander Wuerstlein2015-02-135-234/+540
| | | | | | | | | | | | | | (320_nxagent_configurable-keystrokes.full.patch). Replaces the hardcoded nxagent keybindings by a configurable table of keybindings. The default configuration is the same as the original one, to maintain compatibility. A user/administrator can either specify a command line parameter, environment variable or place a file in ~/.nx/config/keystrokes.cfg or /etc/nxagent/keystrokes.cfg to reconfigure these keybindings. The configuration file format is XML, a dependency on libxml2 is added to allow parsing the configuration.
* Set WM_CLASS to X2GoAgent/NXAgent (300_nxagent_set-wm-class.full.patch).Oleksandr Shneyder2015-02-101-0/+36
| | | | | | | | | | | | | | Depending on the binary name of the agent either NXAgent or X2GoAgent is set as WM_Class. This is needed for some window managers (like the one shipped with Maemo) The original WM_CLASS patch has been taken from the FreeNX patch series, author unknown. The nxagent/x2goagent has been done by the X2Go Project, author see below.
* Save session state in file.Oleksandr Shneyder2015-02-105-1/+51
| | | | | | | | | 210_nxagent_save_session_state.full.patch 210_nxcomp_save_session_state.full+lite.patch This patch adds a "state" option to NX (agent) which allows one to specify a file where nxagent will write its session state into.
* Add x2goagent man page (209_x2goagent_add-man-page.full.patch).Mike Gabriel2015-02-101-0/+35
|
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 07:57:39 +0000