From f4092abdf94af6a99aff944d6264bc1284e8bdd4 Mon Sep 17 00:00:00 2001 From: Reinhard Tartler Date: Mon, 10 Oct 2011 17:43:39 +0200 Subject: Imported nx-X11-3.1.0-1.tar.gz Summary: Imported nx-X11-3.1.0-1.tar.gz Keywords: Imported nx-X11-3.1.0-1.tar.gz into Git repository --- .../extras/freetype2/include/freetype/ftstroke.h | 686 +++++++++++++++++++++ 1 file changed, 686 insertions(+) create mode 100644 nx-X11/extras/freetype2/include/freetype/ftstroke.h (limited to 'nx-X11/extras/freetype2/include/freetype/ftstroke.h') diff --git a/nx-X11/extras/freetype2/include/freetype/ftstroke.h b/nx-X11/extras/freetype2/include/freetype/ftstroke.h new file mode 100644 index 000000000..a3052e858 --- /dev/null +++ b/nx-X11/extras/freetype2/include/freetype/ftstroke.h @@ -0,0 +1,686 @@ +/***************************************************************************/ +/* */ +/* ftstroke.h */ +/* */ +/* FreeType path stroker (specification). */ +/* */ +/* Copyright 2002, 2003, 2004 by */ +/* David Turner, Robert Wilhelm, and Werner Lemberg. */ +/* */ +/* This file is part of the FreeType project, and may only be used, */ +/* modified, and distributed under the terms of the FreeType project */ +/* license, LICENSE.TXT. By continuing to use, modify, or distribute */ +/* this file you indicate that you have read the license and */ +/* understand and accept it fully. */ +/* */ +/***************************************************************************/ + + +#ifndef __FT_STROKE_H__ +#define __FT_STROKE_H__ + +#include +#include FT_OUTLINE_H +#include FT_GLYPH_H + +FT_BEGIN_HEADER + + /*@************************************************************* + * + * @type: + * FT_Stroker + * + * @description: + * Opaque handler to a path stroker object. + */ + typedef struct FT_StrokerRec_* FT_Stroker; + + + /*@************************************************************* + * + * @enum: + * FT_Stroker_LineJoin + * + * @description: + * These values determine how two joining lines are rendered + * in a stroker. + * + * @values: + * FT_STROKER_LINEJOIN_ROUND :: + * Used to render rounded line joins. Circular arcs are used + * to join two lines smoothly. + * + * FT_STROKER_LINEJOIN_BEVEL :: + * Used to render beveled line joins; i.e., the two joining lines + * are extended until they intersect. + * + * FT_STROKER_LINEJOIN_MITER :: + * Same as beveled rendering, except that an additional line + * break is added if the angle between the two joining lines + * is too closed (this is useful to avoid unpleasant spikes + * in beveled rendering). + */ + typedef enum + { + FT_STROKER_LINEJOIN_ROUND = 0, + FT_STROKER_LINEJOIN_BEVEL, + FT_STROKER_LINEJOIN_MITER + + } FT_Stroker_LineJoin; + + + /*@************************************************************* + * + * @enum: + * FT_Stroker_LineCap + * + * @description: + * These values determine how the end of opened sub-paths are + * rendered in a stroke. + * + * @values: + * FT_STROKER_LINECAP_BUTT :: + * The end of lines is rendered as a full stop on the last + * point itself. + * + * FT_STROKER_LINECAP_ROUND :: + * The end of lines is rendered as a half-circle around the + * last point. + * + * FT_STROKER_LINECAP_SQUARE :: + * The end of lines is rendered as a square around the + * last point. + */ + typedef enum + { + FT_STROKER_LINECAP_BUTT = 0, + FT_STROKER_LINECAP_ROUND, + FT_STROKER_LINECAP_SQUARE + + } FT_Stroker_LineCap; + + + /************************************************************** + * + * @enum: + * FT_StrokerBorder + * + * @description: + * These values are used to select a given stroke border + * in @FT_Stroker_GetBorderCounts and @FT_Stroker_ExportBorder. + * + * @values: + * FT_STROKER_BORDER_LEFT :: + * Select the left border, relative to the drawing direction. + * + * FT_STROKER_BORDER_RIGHT :: + * Select the right border, relative to the drawing direction. + * + * @note: + * Applications are generally interested in the `inside' and `outside' + * borders. However, there is no direct mapping between these and + * the `left' / `right' ones, since this really depends on the glyph's + * drawing orientation, which varies between font formats. + * + * You can however use @FT_Outline_GetInsideBorder and + * @FT_Outline_GetOutsideBorder to get these. + */ + typedef enum + { + FT_STROKER_BORDER_LEFT = 0, + FT_STROKER_BORDER_RIGHT + + } FT_StrokerBorder; + + + /************************************************************** + * + * @function: + * FT_Outline_GetInsideBorder + * + * @description: + * Retrieve the @FT_StrokerBorder value corresponding to the + * `inside' borders of a given outline. + * + * @input: + * outline :: + * The source outline handle. + * + * @return: + * The border index. @FT_STROKER_BORDER_LEFT for empty or invalid + * outlines. + */ + FT_EXPORT( FT_StrokerBorder ) + FT_Outline_GetInsideBorder( FT_Outline* outline ); + + + /************************************************************** + * + * @function: + * FT_Outline_GetOutsideBorder + * + * @description: + * Retrieve the @FT_StrokerBorder value corresponding to the + * `outside' borders of a given outline. + * + * @input: + * outline :: + * The source outline handle. + * + * @return: + * The border index. @FT_STROKER_BORDER_LEFT for empty or invalid + * outlines. + */ + FT_EXPORT( FT_StrokerBorder ) + FT_Outline_GetOutsideBorder( FT_Outline* outline ); + + + /************************************************************** + * + * @function: + * FT_Stroker_New + * + * @description: + * Create a new stroker object. + * + * @input: + * memory :: + * The memory manager handle. + * + * @output: + * A new stroker object handle. NULL in case of error. + * + * @return: + * FreeType error code. 0 means success. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_New( FT_Memory memory, + FT_Stroker *astroker ); + + + /************************************************************** + * + * @function: + * FT_Stroker_Set + * + * @description: + * Reset a stroker object's attributes. + * + * @input: + * stroker :: + * The target stroker handle. + * + * radius :: + * The border radius. + * + * line_cap :: + * The line cap style. + * + * line_join :: + * The line join style. + * + * miter_limit :: + * The miter limit for the FT_STROKER_LINEJOIN_MITER style, + * expressed as 16.16 fixed point value. + * + * @note: + * The radius is expressed in the same units that the outline + * coordinates. + */ + FT_EXPORT( void ) + FT_Stroker_Set( FT_Stroker stroker, + FT_Fixed radius, + FT_Stroker_LineCap line_cap, + FT_Stroker_LineJoin line_join, + FT_Fixed miter_limit ); + + + /************************************************************** + * + * @function: + * FT_Stroker_Rewind + * + * @description: + * Reset a stroker object without changing its attributes. + * You should call this function before beginning a new + * series of calls to @FT_Stroker_BeginSubPath or + * @FT_Stroker_EndSubPath. + * + * @input: + * stroker :: + * The target stroker handle. + */ + FT_EXPORT( void ) + FT_Stroker_Rewind( FT_Stroker stroker ); + + + /************************************************************** + * + * @function: + * FT_Stroker_ParseOutline + * + * @description: + * A convenience function used to parse a whole outline with + * the stroker. The resulting outline(s) can be retrieved + * later by functions like @FT_Stroker_GetCounts and @FT_Stroker_Export. + * + * @input: + * stroker :: + * The target stroker handle. + * + * outline :: + * The source outline. + * + * opened :: + * A boolean. If TRUE, the outline is treated as an open path + * instead of a closed one. + * + * @return: + * FreeType error code. 0 means success. + * + * @note: + * If `opened' is 0 (the default), the outline is treated as a closed + * path, and the stroker will generate two distinct `border' outlines. + * + * If `opened' is 1, the outline is processed as an open path, and the + * stroker will generate a single `stroke' outline. + * + * This function calls @FT_Stroker_Rewind automatically. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_ParseOutline( FT_Stroker stroker, + FT_Outline* outline, + FT_Bool opened ); + + + /************************************************************** + * + * @function: + * FT_Stroker_BeginSubPath + * + * @description: + * Start a new sub-path in the stroker. + * + * @input: + * stroker :: + * The target stroker handle. + * + * to :: + * A pointer to the start vector. + * + * open :: + * A boolean. If TRUE, the sub-path is treated as an open one. + * + * @return: + * FreeType error code. 0 means success. + * + * @note: + * This function is useful when you need to stroke a path that is + * not stored as a @FT_Outline object. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_BeginSubPath( FT_Stroker stroker, + FT_Vector* to, + FT_Bool open ); + + + /************************************************************** + * + * @function: + * FT_Stroker_EndSubPath + * + * @description: + * Close the current sub-path in the stroker. + * + * @input: + * stroker :: + * The target stroker handle. + * + * @return: + * FreeType error code. 0 means success. + * + * @note: + * You should call this function after @FT_Stroker_BeginSubPath. + * If the subpath was not `opened', this function will `draw' a + * single line segment to the start position when needed. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_EndSubPath( FT_Stroker stroker ); + + + /************************************************************** + * + * @function: + * FT_Stroker_LineTo + * + * @description: + * `Draw' a single line segment in the stroker's current sub-path, + * from the last position. + * + * @input: + * stroker :: + * The target stroker handle. + * + * to :: + * A pointer to the destination point. + * + * @return: + * FreeType error code. 0 means success. + * + * @note: + * You should call this function between @FT_Stroker_BeginSubPath and + * @FT_Stroker_EndSubPath. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_LineTo( FT_Stroker stroker, + FT_Vector* to ); + + + /************************************************************** + * + * @function: + * FT_Stroker_ConicTo + * + * @description: + * `Draw; a single quadratic bezier in the stroker's current sub-path, + * from the last position. + * + * @input: + * stroker :: + * The target stroker handle. + * + * control :: + * A pointer to a Bézier control point. + * + * to :: + * A pointer to the destination point. + * + * @return: + * FreeType error code. 0 means success. + * + * @note: + * You should call this function between @FT_Stroker_BeginSubPath and + * @FT_Stroker_EndSubPath. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_ConicTo( FT_Stroker stroker, + FT_Vector* control, + FT_Vector* to ); + + + /************************************************************** + * + * @function: + * FT_Stroker_CubicTo + * + * @description: + * `Draw' a single cubic Bézier in the stroker's current sub-path, + * from the last position. + * + * @input: + * stroker :: + * The target stroker handle. + * + * control1 :: + * A pointer to the first Bézier control point. + * + * control2 :: + * A pointer to second Bézier control point. + * + * to :: + * A pointer to the destination point. + * + * @return: + * FreeType error code. 0 means success. + * + * @note: + * You should call this function between @FT_Stroker_BeginSubPath and + * @FT_Stroker_EndSubPath. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_CubicTo( FT_Stroker stroker, + FT_Vector* control1, + FT_Vector* control2, + FT_Vector* to ); + + + /************************************************************** + * + * @function: + * FT_Stroker_GetBorderCounts + * + * @description: + * Vall this function once you have finished parsing your paths + * with the stroker. It will return the number of points and + * contours necessary to export one of the `border' or `stroke' + * outlines generated by the stroker. + * + * @input: + * stroker :: + * The target stroker handle. + * + * border :: + * The border index. + * + * @output: + * anum_points :: + * The number of points. + * + * anum_contours :: + * The number of contours. + * + * @return: + * FreeType error code. 0 means success. + * + * @note: + * When an outline, or a sub-path, is `closed', the stroker generates + * two independent `border' outlines, named `left' and `right'. + * + * When the outline, or a sub-path, is `opened', the stroker merges + * the `border' outlines with caps. The `left' border receives all + * points, while the `right' border becomes empty. + * + * Use the function @FT_Stroker_GetCounts instead if you want to + * retrieve the counts associated to both borders. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_GetBorderCounts( FT_Stroker stroker, + FT_StrokerBorder border, + FT_UInt *anum_points, + FT_UInt *anum_contours ); + + + /************************************************************** + * + * @function: + * FT_Stroker_ExportBorder + * + * @description: + * Call this function after @FT_Stroker_GetBorderCounts to + * export the corresponding border to your own @FT_Outline + * structure. + * + * Note that this function will append the border points and + * contours to your outline, but will not try to resize its + * arrays. + * + * @input: + * stroker :: + * The target stroker handle. + * + * border :: + * The border index. + * + * outline :: + * The target outline handle. + * + * @note: + * Always call this function after @FT_Stroker_GetBorderCounts to + * get sure that there is enough room in your @FT_Outline object to + * receive all new data. + * + * When an outline, or a sub-path, is `closed', the stroker generates + * two independent `border' outlines, named `left' and `right' + * + * When the outline, or a sub-path, is `opened', the stroker merges + * the `border' outlines with caps. The `left' border receives all + * points, while the `right' border becomes empty. + * + * Use the function @FT_Stroker_Export instead if you want to + * retrieve all borders at once. + */ + FT_EXPORT( void ) + FT_Stroker_ExportBorder( FT_Stroker stroker, + FT_StrokerBorder border, + FT_Outline* outline ); + + + /************************************************************** + * + * @function: + * FT_Stroker_GetCounts + * + * @description: + * Call this function once you have finished parsing your paths + * with the stroker. It returns the number of points and + * contours necessary to export all points/borders from the stroked + * outline/path. + * + * @input: + * stroker :: + * The target stroker handle. + * + * @output: + * anum_points :: + * The number of points. + * + * anum_contours :: + * The number of contours. + * + * @return: + * FreeType error code. 0 means success. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_GetCounts( FT_Stroker stroker, + FT_UInt *anum_points, + FT_UInt *anum_contours ); + + + /************************************************************** + * + * @function: + * FT_Stroker_Export + * + * @description: + * Call this function after @FT_Stroker_GetBorderCounts to + * export the all borders to your own @FT_Outline structure. + * + * Note that this function will append the border points and + * contours to your outline, but will not try to resize its + * arrays. + * + * @input: + * stroker :: + * The target stroker handle. + * + * outline :: + * The target outline handle. + */ + FT_EXPORT( void ) + FT_Stroker_Export( FT_Stroker stroker, + FT_Outline* outline ); + + + /************************************************************** + * + * @function: + * FT_Stroker_Done + * + * @description: + * Destroy a stroker object. + * + * @input: + * stroker :: + * A stroker handle. Can be NULL. + */ + FT_EXPORT( void ) + FT_Stroker_Done( FT_Stroker stroker ); + + + /************************************************************** + * + * @function: + * FT_Glyph_Stroke + * + * @description: + * Stroke a given outline glyph object with a given stroker. + * + * @inout: + * pglyph :: Source glyph handle on input, new glyph handle + * on output. + * + * @input: + * stroker :: + * A stroker handle. + * + * destroy :: + * A Boolean. If TRUE, the source glyph object is destroyed + * on success. + * + * @return: + * FreeType error code. 0 means success. + * + * @note: + * The source glyph is untouched in case of error. + */ + FT_EXPORT( FT_Error ) + FT_Glyph_Stroke( FT_Glyph *pglyph, + FT_Stroker stroker, + FT_Bool destroy ); + + + /************************************************************** + * + * @function: + * FT_Glyph_StrokeBorder + * + * @description: + * Stroke a given outline glyph object with a given stroker, but + * only return either its inside or outside border. + * + * @inout: + * pglyph :: + * Source glyph handle on input, new glyph handle on output. + * + * @input: + * stroker :: + * A stroker handle. + * + * inside :: + * A Boolean. If TRUE, return the inside border, otherwise + * the outside border. + * + * destroy :: + * A Boolean. If TRUE, the source glyph object is destroyed + * on success. + * + * @return: + * FreeType error code. 0 means success. + * + * @note: + * The source glyph is untouched in case of error. + */ + FT_EXPORT( FT_Error ) + FT_Glyph_StrokeBorder( FT_Glyph *pglyph, + FT_Stroker stroker, + FT_Bool inside, + FT_Bool destroy ); + + /* */ + +FT_END_HEADER + +#endif /* __FT_STROKE_H__ */ + + +/* END */ -- cgit v1.2.3