From f4092abdf94af6a99aff944d6264bc1284e8bdd4 Mon Sep 17 00:00:00 2001 From: Reinhard Tartler Date: Mon, 10 Oct 2011 17:43:39 +0200 Subject: Imported nx-X11-3.1.0-1.tar.gz Summary: Imported nx-X11-3.1.0-1.tar.gz Keywords: Imported nx-X11-3.1.0-1.tar.gz into Git repository --- nx-X11/extras/ttf2pt1/ttf2pt1.1 | 832 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 832 insertions(+) create mode 100644 nx-X11/extras/ttf2pt1/ttf2pt1.1 (limited to 'nx-X11/extras/ttf2pt1/ttf2pt1.1') diff --git a/nx-X11/extras/ttf2pt1/ttf2pt1.1 b/nx-X11/extras/ttf2pt1/ttf2pt1.1 new file mode 100644 index 000000000..500a7d2ec --- /dev/null +++ b/nx-X11/extras/ttf2pt1/ttf2pt1.1 @@ -0,0 +1,832 @@ +.rn '' }` +''' $RCSfile: ttf2pt1.1,v $$Revision: 1.2 $$Date: 2004/04/23 18:42:57 $ +''' +''' $Log: ttf2pt1.1,v $ +''' Revision 1.2 2004/04/23 18:42:57 eich +''' 2004-04-23 Egbert Eich +''' Merging XORG-CURRENT into trunk +''' +''' Revision 1.1.4.1 2004/04/21 10:03:13 gisburn +''' Fix for http://pdx.freedesktop.org/cgi-bin/bugzilla/show_bug.cgi?id=530 - Land XPRINT branch on XORG-CURRENT +''' +''' Revision 1.1 2003/06/04 00:33:54 roland +''' Fix for http://xprint.mozdev.org/bugs/show_bug.cgi?id=3846 - RFE: Upload Freetype --> PS Type1 font converter "ttf2pt1" ... +''' +''' +.de Sh +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp +.if t .sp .5v +.if n .sp +.. +.de Ip +.br +.ie \\n(.$>=3 .ne \\$3 +.el .ne 3 +.IP "\\$1" \\$2 +.. +.de Vb +.ft CW +.nf +.ne \\$1 +.. +.de Ve +.ft R + +.fi +.. +''' +''' +''' Set up \*(-- to give an unbreakable dash; +''' string Tr holds user defined translation string. +''' Bell System Logo is used as a dummy character. +''' +.tr \(*W-|\(bv\*(Tr +.ie n \{\ +.ds -- \(*W- +.ds PI pi +.if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +.if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +.ds L" "" +.ds R" "" +''' \*(M", \*(S", \*(N" and \*(T" are the equivalent of +''' \*(L" and \*(R", except that they are used on ".xx" lines, +''' such as .IP and .SH, which do another additional levels of +''' double-quote interpretation +.ds M" """ +.ds S" """ +.ds N" """"" +.ds T" """"" +.ds L' ' +.ds R' ' +.ds M' ' +.ds S' ' +.ds N' ' +.ds T' ' +'br\} +.el\{\ +.ds -- \(em\| +.tr \*(Tr +.ds L" `` +.ds R" '' +.ds M" `` +.ds S" '' +.ds N" `` +.ds T" '' +.ds L' ` +.ds R' ' +.ds M' ` +.ds S' ' +.ds N' ` +.ds T' ' +.ds PI \(*p +'br\} +.\" If the F register is turned on, we'll generate +.\" index entries out stderr for the following things: +.\" TH Title +.\" SH Header +.\" Sh Subsection +.\" Ip Item +.\" X<> Xref (embedded +.\" Of course, you have to process the output yourself +.\" in some meaninful fashion. +.if \nF \{ +.de IX +.tm Index:\\$1\t\\n%\t"\\$2" +.. +.nr % 0 +.rr F +.\} +.TH TTF2PT1 1 "version 3.4.4-SNAP-030526" "May 26, 2003" "TTF2PT1 Font Converter" +.UC +.if n .hy 0 +.if n .na +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.de CQ \" put $1 in typewriter font +.ft CW +'if n "\c +'if t \\&\\$1\c +'if n \\&\\$1\c +'if n \&" +\\&\\$2 \\$3 \\$4 \\$5 \\$6 \\$7 +'.ft R +.. +.\" @(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2 +. \" AM - accent mark definitions +.bd B 3 +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds ? ? +. ds ! ! +. ds / +. ds q +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds ? \s-2c\h'-\w'c'u*7/10'\u\h'\*(#H'\zi\d\s+2\h'\w'c'u*8/10' +. ds ! \s-2\(or\s+2\h'-\w'\(or'u'\v'-.8m'.\v'.8m' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +. ds q o\h'-\w'o'u*8/10'\s-4\v'.4m'\z\(*i\v'-.4m'\s+4\h'\w'o'u*8/10' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds v \\k:\h'-(\\n(.wu*9/10-\*(#H)'\v'-\*(#V'\*(#[\s-4v\s0\v'\*(#V'\h'|\\n:u'\*(#] +.ds _ \\k:\h'-(\\n(.wu*9/10-\*(#H+(\*(#F*2/3))'\v'-.4m'\z\(hy\v'.4m'\h'|\\n:u' +.ds . \\k:\h'-(\\n(.wu*8/10)'\v'\*(#V*4/10'\z.\v'-\*(#V*4/10'\h'|\\n:u' +.ds 3 \*(#[\v'.2m'\s-2\&3\s0\v'-.2m'\*(#] +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +.ds oe o\h'-(\w'o'u*4/10)'e +.ds Oe O\h'-(\w'O'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds v \h'-1'\o'\(aa\(ga' +. ds _ \h'-1'^ +. ds . \h'-1'. +. ds 3 3 +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +. ds oe oe +. ds Oe OE +.\} +.rm #[ #] #H #V #F C +.SH "NAME" +TTF2PT1 \- A True Type to PostScript Type 1 Font Converter +.SH "SYNOPSIS" +\f(CWttf2pt1 \fI[-options] ttffont.ttf [Fontname]\fR\fR +.PP +or +.PP +\f(CWttf2pt1 \fI[-options] ttffont.ttf -\fR\fR +.SH "DESCRIPTION" +Ttf2pt1 is a font converter from the True Type format (and some other formats +supported by the FreeType library as well) to the Adobe Type1 format. +.PP +The versions 3.0 and later got rather extensive post-processing algorithm that +brings the converted fonts to the requirements of the Type1 standard, tries to +correct the rounding errors introduced during conversions and some simple +kinds of bugs that are typical for the public domain TTF fonts. It +also generates the hints that enable much better rendering of fonts in +small sizes that are typical for the computer displays. But everything +has its price, and some of the optimizations may not work well for certain +fonts. That's why the options were added to the converter, to control +the performed optimizations. +.SH "OPTIONS" +The first variant creates the file \f(CWFontname.pfa\fR (or \f(CWFontname.pfb\fR if the +option \*(L'\fB\-b\fR\*(R' was used) with the converted font and \f(CWFontname.afm\fR with the +font metrics, the second one prints the font or another file (if the option +\&\*(R'\fB\-G\fR\*(R' was used) on the standard output from where it can be immediately +piped through some filter. If no \f(CWFontname\fR is specified for the first +variant, the name is generated from \f(CWttffont\fR by replacing the \f(CW.ttf\fR +filename suffix. +.PP +Most of the time no options are neccessary (with a possible exception +of \*(L'\fB\-e\fR'). But if there are some troubles with the resulting font, they +may be used to control the conversion. +The \fBoptions\fR are: +.Ip "\(bu" 2 +\f(CW\fB-a\fR\fR \- Include all the glyphs from the source file into the converted +file. If this option is not specified then only the glyphs that have +been assigned some encoding are included, because the rest of glyphs +would be inaccessible anyway and would only consume the disk space. +But some applications are clever enough to change the encoding on +the fly and thus use the other glyphs, in this case they could +benefit from using this option. But there is a catch: the X11 library +has rather low limit for the font size. Including more glyphs increases +the file size and thus increases the chance of hitting this limit. +See \f(CWapp/X11/README\fR for the description of a +patch to X11 which fixes this problem. +.Ip "\(bu" 2 +\f(CW\fB-b\fR\fR \- Encode the resulting font to produce a ready \f(CW.pfb\fR file. +.Ip "\(bu" 2 +\f(CW\fB-d \fIsuboptions\fR\fR\fR \- Debugging options. The suboptions are: +.Sp +\f(CW\fBa\fR\fR \- Print out the absolute coordinates of dots in outlines. Such +a font can not be used by any program (that's why this option is +incompatible with \*(L'\fB\-e\fR') but it has proven to be a valuable debuging +information. +.Sp +\f(CW\fBr\fR\fR \- Do not reverse the direction of outlines. The \s-1TTF\s0 fonts have +the standard direction of outlines opposite to the Type1 fonts. So +they should be reversed during proper conversion. This option +may be used for debugging or to handle a \s-1TTF\s0 font with wrong +direction of outlines (possibly, converted in a broken way from +a Type1 font). The first signs of the wrong direction are the +letters like \*(L"P\*(R" or \*(L"B\*(R" without the unpainted \*(L"holes\*(R" inside. +.Ip "\(bu" 2 +\f(CW\fB-e\fR\fR \- Assemble the resulting font to produce a ready \f(CW.pfa\fR file. +.Sp +[ S.B.: Personally I don't think that this option is particularly useful. +The same result may be achieved by piping the unassembled data +through t1asm, the Type 1 assembler. And, anyways, it's good to +have the t1utils package handy. But Mark and many users think that +this functionality is good and it took not much time to add this option. ] +.Ip "\(bu" 2 +\f(CW\fB-F\fR\fR \- Force the Unicode encoding: any type of \s-1MS\s0 encoding specified +in the font is ignored and the font is treated like it has Unicode +encoding. \fB\s-1WARNING\s0:\fR this option is intended for buggy fonts +which actually are in Unicode but are marked as something else. The +effect on the other fonts is unpredictable. +.Ip "\(bu" 2 +\f(CW\fB-G \fIsuboptions\fR\fR\fR \- File generation options. The suboptions may be lowercase +or uppercase, the lowercase ones disable the generation of particular +files, the corresponding uppercase suboptions enable the generation of the +same kind of files. If the result of ttf2pt1 is requested to be printed on +the standard output, the last enabling suboption of \fB\-G\fR determines +which file will be written to the standard output and the rest of files +will be discarded. For example, \fB\-G A\fR will request the \s-1AFM\s0 file. +The suboptions to disable/enable the generation of the files are: +.Sp +\f(CW\fBf/F\fR\fR \- The font file. Depending on the other options this file +will have one of the suffixes \f(CW.t1a\fR, \f(CW.pfa\fR or \f(CW.pfb\fR. If the conversion result +is requested on the standard output ('\f(CW-\fR\*(R' is used as the output file name) +then the font file will also be written there by default, if not overwritten +by another suboption of \fB\-G\fR. +\fBDefault: enabled\fR +.Sp +\f(CW\fBa/A\fR\fR \- The Adobe font metrics file (\f(CW.afm\fR). +\fBDefault: enabled\fR +.Sp +\f(CW\fBe/E\fR\fR \- The dvips encoding file (\f(CW.enc\fR). +\fBDefault: disabled\fR +.Ip "\(bu" 2 +\f(CW\fB-l \fIlanguage\fR[+\fIargument\fR]\fR\fR \- Extract the fonts for the specified language from a +multi-language Unicode font. If this option is not used the converter +tries to guess the language by the values of the shell variable \s-1LANG\s0. +If it is not able to guess the language by \s-1LANG\s0 it tries all the +languages in the order they are listed. +.Sp +After the plus sign an optional argument for the language extractor +may be specified. The format of the argument is absolutely up to +the particular language converter. The primary purpose of the +argument is to support selection of planes for the multi-plane +Eastern encodings but it can also be used in any other way. The +language extractor may decide to add the plane name in some form +to the name of the resulting font. None of the currently supported +languages make any use of the argument yet. +.Sp +As of now the following languages are supported: +.Sp +\ \ \f(CWlatin1\fR \- for all the languages using the Latin-1 encoding +.Sp +\ \ \f(CWlatin2\fR \- for the Central European languages +.Sp +\ \ \f(CWlatin4\fR \- for the Baltic languages +.Sp +\ \ \f(CWlatin5\fR \- for the Turkish language +.Sp +\ \ \f(CWcyrillic\fR \- for the languages with Cyrillic alphabet +.Sp +\ \ \f(CWrussian\fR \- historic synonym for cyrillic +.Sp +\ \ \f(CWbulgarian\fR \- historic synonym for cyrillic +.Sp +\ \ \f(CWadobestd\fR \- for the AdobeStandard encoding used by TeX +.Sp +\ \ \f(CWplane+\fIargument\fR\fR \- to select one plane from a multi-byte encoding +.Sp +The argument of the \*(L"\f(CWplane\fR\*(R" language may be in one of three forms: +.Sp +\ \ \f(CWplane+\fBpid=\fR\fI\fR\fB,eid=\fR\fI\fR\fR +.Sp +\ \ \f(CWplane+\fBpid=\fR\fI\fR\fB,eid=\fR\fI\fR\fB,\fR\fI\fR\fR +.Sp +\ \ \f(CWplane+\fI\fR\fR +.Sp +Pid (\s-1TTF\s0 platform id) and eid (\s-1TTF\s0 encoding id) select a particular +\s-1TTF\s0 encoding table in the original font. They are specified as decimal +numbers. If this particular encoding table is not present in the font +file then the conversion fails. The native ("ttf") front-end parser supports +only pid=3 (Windows platform), the FreeType-based ("ft") front-end supports +any platform. If pid/eid is not specified then the \s-1TTF\s0 encoding table is +determined as usual: Unicode encoding if it's first or an 8-bit encoding +if not (and for an 8-bit encoding the plane number is silently ignored). +To prevent the converter from falling back to an 8-bit encoding, specify +the Unicode pid/eid value explicitly. +.Sp +Plane_number is a hexadecimal (if starts with \*(L"\fB0x\fR") or decimal number. +It gives the values of upper bytes for which 256 characters will be +selected. If not specified, defaults to 0. It is also used as a font +name suffix (the leading \*(L"0x\*(R" is not included into the suffix). +.Sp +\fB\s-1NOTE\s0:\fR +You may notice that the language names are not uniform: some are the +names of particular languages and some are names of encodings. This +is because of the different approaches. The original idea was to +implement a conversion from Unicode to the appropriate Windows +encoding for a given language. And then use the translation tables +to generate the fonts in whatever final encodings are needed. This +would allow to pile together the Unicode fonts and the non-Unicode +Windows fonts for that language and let the program to sort them out +automatically. And then generate fonts in all the possible encodings +for that language. An example of this approach is the Russian language +support. But if there is no multiplicity of encodings used for some +languages and if the non-Unicode fonts are not considered important +by the users, another way would be simpler to implement: just provide +only one table for extraction of the target encoding from Unicode +and don't bother with the translation tables. The latin* \*(L"languages\*(R" +are examples of this approach. If somebody feels that he needs the +Type1 fonts both in Latin-* and Windows encodings he or she is absolutely +welcome to submit the code to implement it. +.Sp +\fB\s-1WARNING\s0:\fR +Some of the glyphs included into the AdobeStandard encoding are not +included into the Unicode standard. The most typical examples of such +glyphs are ligatures like \*(L'fi\*(R', \*(L'fl\*(R' etc. Because of this the font +designers may place them at various places. The converter tries to +do its best, if the glyphs have honest Adobe names and/or are +placed at the same codes as in the Microsoft fonts they will be +picked up. Otherwise a possible solution is to use the option \*(L'\fB\-L\fR\*(R' +with an external map. +.Ip "\(bu" 2 +\f(CW\fB-L \fIfile\fR[+[pid=\fI\fR,eid=\fI\fR,][\fIplane\fR]]\fR\fR \- Extract the fonts for the specified +language from a multi-language font using the map from this file. This is +rather like the option \*(L'\fB\-l\fR\*(R' but the encoding map is not +compiled into the program, it's taken from that file, so it's +easy to edit. Examples of such files are provided in +\f(CWmaps/adobe-standard-encoding.map\fR, \f(CWCP1250.map\fR. (\fB\s-1NOTE\s0:\fR +the \*(L'standard encoding\*(R' map does not include all the glyphs of the +AdobeStandard encoding, it's provided only as an example.) The +description of the supported map formats is in the file +\f(CWmaps/unicode-sample.map\fR. +.Sp +Likewise to \*(L'\fB\-l\fR\*(R', an argument may be specified after the map file +name. But in this case the argument has fixed meaning: it selects the +original \s-1TTF\s0 encoding table (the syntax is the same as in \*(L'\fB\-l plane\fR') +and/or a plane of the map file. The plane name also gets added after dash +to the font name. The plane is a concept used in the Eastern fonts with big +number of glyphs: one \s-1TTF\s0 font gets divided into multiple Type1 fonts, +each containing one plane of up to 256 glyphs. But with a little +creativity this concept may be used for other purposes of combining +multiple translation maps into one file. To extract multiple planes +from a \s-1TTF\s0 font \f(CWttf2pt1\fR must be run multiple times, each time with +a different plane name specified. +.Sp +The default original \s-1TTF\s0 encoding table used for the option \*(L'\fB\-L\fR\*(R' is +Unicode. The map files may include directives to specify different original +\s-1TTF\s0 encodings. However if the pid/eid pair is specified with +it overrides any original encoding specified in the map file. +.Ip "\(bu" 2 +\f(CW\fB-m \fItype\fR=\fIvalue\fR\fR\fR \- Set maximal or minimal limits of resources. +These limits control the the font generation by limiting the resources +that the font is permitted to require from the PostScript interpreter. +The currently supported types of limits are: +.Sp +\f(CW\fBh\fR\fR \- the maximal hint stack depth for the substituted hints. +The default value is 128, according to the limitation in X11. This seems to +be the lowest (and thus the safest) widespread value. To display the +hint stack depth required by each glyph in a \f(CW.t1a\fR file use the script +\f(CWscripts/cntstems.pl\fR. +.Ip "\(bu" 2 +\f(CW\fB-O \fIsuboptions\fR\fR\fR \- Outline processing options. The suboptions +may be lowercase or uppercase, the lowercase ones disable the features, +the corresponding uppercase suboptions enable the same features. +The suboptions to disable/enable features are: +.Sp +\f(CW\fBb/B\fR\fR \- Guessing of the ForceBold parameter. This parameter helps +the Type1 engine to rasterize the bold fonts properly at small sizes. +But the algorithm used to guess the proper value of this flag makes +that guess based solely on the font name. In rare cases that may cause +errors, in these cases you may want to disable this guessing. +\fBDefault: enabled\fR +.Sp +\f(CW\fBh/H\fR\fR \- Autogeneration of hints. The really complex outlines +may confuse the algorithm, so theoretically it may be useful +sometimes to disable them. Although up to now it seems that +even bad hints are better than no hints at all. +\fBDefault: enabled\fR +.Sp +\f(CW\fBu/U\fR\fR \- Hint substitution. Hint substitution is a technique +permitting generation of more detailed hints for the rasterizer. It allows +to use different sets of hints for different parts of a glyph and change +these sets as neccessary during rasterization (that's why \*(L"substituted"). +So it should improve the quality of the fonts rendered at small sizes. +But there are two catches: First, the X11 library has rather low limit for +the font size. More detailed hints increase the file size and thus increase +the chance of hitting this limit (that does not mean that you shall hit it +but you may if your fonts are particularly big). This is especially +probable for Unicode fonts converted with option \*(L'\fB\-a\fR\*(R', so you may want to +use \*(L'\fB\-a\fR\*(R' together with \*(L'\fB\-Ou\fR\*(R'. See \f(CWapp/X11/README\fR for the description of +a patch to X11 which fixes this problem. Second, some rasterizers (again, +X11 is the typical example) have a limitation for total number of hints +used when drawing a glyph (also known as the hint stack depth). If that +stack overflows the glyph is ignored. Starting from version 3.22 \f(CWttf2pt1\fR +uses algorithms to minimizing this depth, with the trade-off of slightly +bigger font files. The glyphs which still exceed the limit set by option +\&\*(R'\fB\-mh\fR\*(R' have all the substituted hints removed and only base hints left. +The algorithms seem to have been refined far enough to make the fonts with +substituted hints look better than the fonts without them or at least the +same. Still if the original fonts are not well-designed the detailed +hinting may emphasize the defects of the design, such as non-even thickness +of lines. So provided that you are not afraid of the X11 bug the best idea +would be to generate a font with this feature and without it, then compare +the results using the program \f(CWother/cmpf\fR (see the description +in \f(CWother/README\fR) and decide which one looks better. +\fBDefault: enabled\fR +.Sp +\f(CW\fBo/O\fR\fR \- Space optimization of the outlines\*(R' code. This kind of optimization +never hurts, and the only reason to disable this feature is for comparison +of the generated fonts with the fonts generated by the previous versions of +converter. Well, it _almost_ never hurts. As it turned out there exist +some brain-damaged printers which don't understand it. Actually this +feature does not change the outlines at all. The Type 1 font manual +provides a set of redundant operators that make font description shorter, +such as \*(L'10 hlineto\*(R' instead of \*(L'0 10 rlineto\*(R' to describe a horizontal +line. This feature enables use of these operators. +\fBDefault: enabled\fR +.Sp +\f(CW\fBs/S\fR\fR \- Smoothing of outlines. If the font is broken in some +way (even the ones that are not easily noticeable), such smoothing +may break it further. So disabling this feature is the first thing to be +tried if some font looks odd. But with smoothing off the hint generation +algorithms may not work properly too. +\fBDefault: enabled\fR +.Sp +\f(CW\fBt/T\fR\fR \- Auto-scaling to the 1000x1000 Type1 standard matrix. The +\s-1TTF\s0 fonts are described in terms of an arbitrary matrix up to +4000x4000. The converted fonts must be scaled to conform to +the Type1 standard. But the scaling introduces additional rounding +errors, so it may be curious sometimes to look at the font in its +original scale. +\fBDefault: enabled\fR +.Sp +\f(CW\fBv/V\fR\fR \- Do vectorization on the bitmap fonts. Functionally +\*(L"vectorization\*(R" is the same thing as \*(L"autotracing\*(R", a different word is +used purely to differentiate it from the Autotrace library. It tries to +produce nice smooth outlines from bitmaps. This feature is still a work +in progress though the results are already mostly decent. +\fBDefault: disabled\fR +.Sp +\f(CW\fBw/W\fR\fR \- Glyphs\*(R' width corection. This option is designed to be +used on broken fonts which specify too narrow widths for the +letters. You can tell that a font can benefit from this option +if you see that the characters are smashed together without +any whitespace between them. This option causes the converter +to set the character widths to the actual width of this character +plus the width of a typical vertical stem. But on the other hand +the well-designed fonts may have characters that look better if +their widths are set slightly narrower. Such well-designed fonts +will benefit from disabling this feature. You may want to convert +a font with and without this feature, compare the results and +select the better one. This feature may be used only on proportional +fonts, it has no effect on the fixed-width fonts. +\fBDefault: disabled\fR +.Sp +\f(CW\fBz/Z\fR\fR \- Use the Autotrace library on the bitmap fonts. The results +are horrible and \fBthe use of this option is not recommended\fR. This option is +present for experimental purposes. It may change or be removed in the +future. The working tracing can be achieved with option \f(CW\fB-OV\fR\fR. +\fBDefault: disabled\fR +.Ip "\(bu" 2 +\f(CW\fB-p \fIparser_name\fR\fR\fR \- Use the specified front-end parser to read the font file. +If this option is not used, ttf2pt1 selects the parser automatically based +on the suffix of the font file name, it uses the first parser in its +list that supports this font type. Now two parsers are supported: +.Sp +\ \ \f(CWttf\fR \- built-in parser for the ttf files (suffix \f(CW.ttf\fR) +.Sp +\ \ \f(CWbdf\fR \- built-in parser for the \s-1BDF\s0 files (suffix \f(CW.bdf\fR) +.Sp +\ \ \f(CWft\fR \- parser based on the FreeType-2 library (suffixes \f(CW.ttf\fR, +\&\f(CW.otf\fR, \f(CW.pfa\fR, \f(CW.pfb\fR) +.Sp +The parser \f(CWft\fR is \fB\s-1NOT\s0\fR linked in by default. See \f(CWMakefile\fR +for instructions how to enable it. We do no support this parser on +Windows: probably it will work but nobody tried and nobody knows how +to build it. +.Sp +The conversion of the bitmap fonts (such as \s-1BDF\s0) is simplistic yet, +producing jagged outlines. When converting such fonts, it might be +a good idea to turn off the hint substitution (using option \fB\-Ou\fR) +because the hints produced will be huge but not adding much to the +quality of the fonts. +.Ip "\(bu" 2 +\f(CW\fB-u \fInumber\fR\fR\fR \- Mark the font with this value as its +UniqueID. The UniqueID is used by the printers with the hard disks +to cache the rasterized characters and thus significantly +speed-up the printing. Some of those printers just can't +store the fonts without UniqueID on their disk.The problem +is that the \s-1ID\s0 is supposed to be unique, as it name says. And +there is no easy way to create a guaranteed unique \s-1ID\s0. Adobe specifies +the range 4000000-4999999 for private IDs but still it's difficult +to guarantee the uniqueness within it. So if you don't really need the +UniqueID don't use it, it's optional. Luckily there are a few millions of +possible IDs, so the chances of collision are rather low. +If instead of the number a special value \*(L'\f(CW\fBA\fR\fR\*(R' is given +then the converter generates the value of UniqueID automatically, +as a hash of the font name. (\fB\s-1NOTE\s0:\fR in the version 3.22 the +algorithm for autogeneration of UniqueID was changed to fit the values +into the Adobe-spacified range. This means that if UniqueIDs were used +then the printer's cache may need to be flushed before replacing the +fonts converted by an old version with fonts converted by a newer version). +A simple way to find if any of the fonts in a given directory have +duplicated UniqueIDs is to use the command: +.Sp +\f(CW\ \ cat *.pf[ab] | grep UniqueID | sort | uniq -c | grep -v ' 1 '\fR +.Sp +Or if you use \f(CWscripts/convert\fR it will do that for you automatically +plus it will also give the exact list of files with duplicate UIDs. +.Ip "\(bu" 2 +\f(CW\fB-v \fIsize\fR\fR\fR \- Re-scale the font to get the size of a typical uppercase +letter somewhere around the specified size. Actually, it re-scales +the whole font to get the size of one language-dependent letter to be +at least of the specified size. Now this letter is \*(L"A\*(R" in all the +supported languages. The size is specified in the points of the +Type 1 coordinate grids, the maximal value is 1000. This is an +experimental option and should be used with caution. It tries to +increase the visible font size for a given point size and thus make +the font more readable. But if overused it may cause the fonts to +look out of scale. As of now the interesting values of size for +this option seem to be located mostly between 600 and 850. This +re-scaling may be quite useful but needs more experience to +understand the balance of its effects. +.Ip "\(bu" 2 +\f(CW\fB-W \fIlevel\fR\fR\fR \- Select the verbosity level of the warnings. +Currently the levels from 0 to 4 are supported. Level 0 means no warnings +at all, level 4 means all the possible warnings. The default level is 3. +Other levels may be added in the future, so using the level number 99 is +recommended to get all the possible warnings. Going below level 2 is +not generally recommended because you may miss valuable information about +the problems with the fonts being converted. +.Ip "\(bu" 2 +\fBObsolete option:\fR +\f(CW\fB-A\fR\fR \- Print the font metrics (.afm file) instead of the font on \s-1STDOUT\s0. +Use \fB\-\s-1GA\s0\fR instead. +.Ip "\(bu" 2 +\fBVery obsolete option:\fR +.Sp +The algorithm that implemented the forced fixed width had major +flaws, so it was disabled. The code is still in the program and +some day it will be refined and returned back. Meanwhile the +option name \*(L'\fB\-f\fR\*(R' was reused for another option. The old version was: +.Sp +\f(CW\fB-f\fR\fR \- Don't try to force the fixed width of font. Normally the converter +considers the fonts in which the glyph width deviates by not more +than 5% as buggy fixed width fonts and forces them to have really +fixed width. If this is undesirable, it can be disabled by this option. +.PP +The \f(CW.pfa\fR font format supposes that the description of the characters +is binary encoded and encrypted. This converter does not encode or +encrypt the data by default, you have to specify the option \*(L'\fB\-e\fR\*(R' +or use the \f(CWt1asm\fR program to assemble (that means, encode and +encrypt) the font program. The \f(CWt1asm\fR program that is included with +the converter is actually a part of the \f(CWt1utils\fR package, rather old +version of which may be obtained from +.PP +http://ttf2pt1.sourceforge.net/t1utils.tar.gz +.PP +Note that \f(CWt1asm\fR from the old version of that package won't work properly +with the files generated by \f(CWttf2pt1\fR version 3.20 and later. Please use +\f(CWt1asm\fR packaged with \f(CWttf2pt1\fR or from the new version \f(CWt1utils\fR +instead. For a newer version of \f(CWt1utils\fR please look at +.PP +http://www.lcdf.org/~eddietwo/type/ +.SH "EXAMPLES" +So, the following command lines: +.PP +\f(CWttf2pt1 -e ttffont.ttf t1font\fR +.PP +\f(CWttf2pt1 ttffont.ttf - | t1asm >t1font.pfa\fR +.PP +represent two ways to get a working font. The benefit of the second form +is that other filters may be applied to the font between the converter +and assembler. +.SH "FILES" +.Ip "\(bu" 2 +\s-1TTF2PT1_LIBXDIR/\s0t1asm +.Ip "\(bu" 2 +\s-1TTF2PT1_SHAREDIR\s0/* +.Ip "\(bu" 2 +\s-1TTF2PT1_SHAREDIR/\s0scripts/* +.Ip "\(bu" 2 +\s-1TTF2PT1_SHAREDIR/\s0other/* +.Ip "\(bu" 2 +\s-1TTF2PT1_SHAREDIR/README\s0 +.Ip "\(bu" 2 +\s-1TTF2PT1_SHAREDIR/FONTS\s0 +.SH "SEE ALSO" +.Ip "\(bu" 4 +the \fIttf2pt1_convert(1)\fR manpage +.Ip "\(bu" 4 +the \fIttf2pt1_x2gs(1)\fR manpage +.Ip "\(bu" 4 +the \fIt1asm(1)\fR manpage +.Ip "\(bu" 4 +ttf2pt1-announce@lists.sourceforge.net +.Sp +The mailing list with announcements about ttf2pt1. It is a moderated mailing +with extremely low traffic. Everyone is encouraged to subscribe to keep in +touch with the current status of project. To subscribe use the Web interface +at http://lists.sourceforge.net/mailman/listinfo/ttf2pt1-announce. +If you have only e-mail access to the Net then send a subscribe request to +the development mailing list ttf2pt1-devel@lists.sourceforge.net and somebody +will help you with subscription. +.Ip "\(bu" 4 +ttf2pt1-devel@lists.sourceforge.net +.Sp +ttf2pt1-users@lists.sourceforge.net +.Sp +The ttf2pt1 mailing lists for development and users issues. They have not +that much traffic either. To subscribe use the Web interface at +http://lists.sourceforge.net/mailman/listinfo/ttf2pt1-devel +and http://lists.sourceforge.net/mailman/listinfo/ttf2pt1-users. +If you have only e-mail access to the Net then send a subscribe request to +the development mailing list ttf2pt1-devel@lists.sourceforge.net and somebody +will help you with subscription. +.Ip "\(bu" 4 +http://ttf2pt1.sourceforge.net +.Sp +The main page of the project. +.Sp +http://www.netspace.net.au/~mheath/ttf2pt1/ +.Sp +The old main page of the project. +.SH "BUGS" +It seems that many Eastern fonts use features of the TTF format that are +not supported by the ttf2pt1's built-in front-end parser. Because of +this for now we recommend using the FreeType-based parser (option +\&\*(R'\fB\-p ft\fR') with the \*(L"\f(CWplane\fR\*(R" language. +.Sh "Troubleshooting and bug reports" +Have problems with conversion of some font ? The converter dumps core ? Or your +printer refuses to understand the converted fonts ? Or some characters are +missing ? Or some characters look strange ? +.PP +Send the bug reports to the ttf2pt1 development mailing list at +ttf2pt1-devel@lists.sourceforge.net. +.PP +Try to collect more information about the problem and include it into +the bug report. (Of course, even better if you would provide a ready +fix, but just a detailed bug report is also good). Provide detailed +information about your problem, this will speed up the response greatly. +Don't just write \*(L"this font looks strange after conversion\*(R" but describe +what's exactly wrong with it: for example, what characters look wrong +and what exactly is wrong about their look. Providing a link to the +original font file would be also a good idea. Try to do a little +troublehooting and report its result. This not only would help with +the fix but may also give you a temporary work-around for the bug. +.PP +First, enable full warnings with option \*(L'\fB\-W99\fR\*(R', save them to +a file and read carefully. Sometimes the prolem is with a not implemented +feature which is reported in the warnings. Still, reporting about such +problems may be a good idea: some features were missed to cut corners, +in hope that no real font is using them. So a report about a font using +such a feature may motivate someone to implement it. Of course, you +may be the most motivated person: after all, you are the one wishing +to convert that font. ;\-) Seriously, the philosophy \*(L"scrath your own itch\*(R" +seems to be the strongest moving force behind the Open Source software. +.PP +The next step is playing with the options. This serves a dual purpose: +on one hand, it helps to localize the bug, on the other hand you may be +able to get a working version of the font for the meantime while the +bug is being fixed. The typical options to try out are: first \*(L'\fB\-Ou\fR\*(R', if +it does not help then \*(L'\fB\-Os\fR\*(R', then \*(L'\fB\-Oh\fR\*(R', then \*(L'\fB\-Oo\fR\*(R'. +They are described in a bit more detail above. Try them one by one +and in combinations. See if with them the resulting fonts look better. +.PP +On some fonts ttf2pt1 just crashes. Commonly that happens because the +font being converted is highly defective (although sometimes the bug +is in ttf2pt1 itself). In any case it should not crash, so the reports +about such cases will help to handle these defects properly in future. +.PP +We try to respond to the bug reports in a timely fashion but alas, this +may not always be possible, especially if the problem is complex. +This is a volunteer project and its resources are limited. Because +of this we would appreciate bug reports as detailed as possible, +and we would appreciate the ready fixes and contributions even more. +.SH "HISTORY" +Based on ttf2pfa by Andrew Weeks, and help from Frank Siegert. +.PP +Modification by Mark Heath. +.PP +Further modification by Sergey Babkin. +.PP +The Type1 assembler by I. Lee Hetherington with modifications by +Kai-Uwe Herbing. + +.rn }` '' +.IX Title "TTF2PT1 1" +.IX Name "TTF2PT1 - A True Type to PostScript Type 1 Font Converter" + +.IX Header "NAME" + +.IX Header "SYNOPSIS" + +.IX Header "DESCRIPTION" + +.IX Header "OPTIONS" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Header "EXAMPLES" + +.IX Header "FILES" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Header "SEE ALSO" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Item "\(bu" + +.IX Header "BUGS" + +.IX Subsection "Troubleshooting and bug reports" + +.IX Header "HISTORY" + -- cgit v1.2.3