From f4092abdf94af6a99aff944d6264bc1284e8bdd4 Mon Sep 17 00:00:00 2001 From: Reinhard Tartler Date: Mon, 10 Oct 2011 17:43:39 +0200 Subject: Imported nx-X11-3.1.0-1.tar.gz Summary: Imported nx-X11-3.1.0-1.tar.gz Keywords: Imported nx-X11-3.1.0-1.tar.gz into Git repository --- .../Xserver/hw/xfree86/os-support/README.OS-lib | 506 +++++++++++++++++++++ 1 file changed, 506 insertions(+) create mode 100644 nx-X11/programs/Xserver/hw/xfree86/os-support/README.OS-lib (limited to 'nx-X11/programs/Xserver/hw/xfree86/os-support/README.OS-lib') diff --git a/nx-X11/programs/Xserver/hw/xfree86/os-support/README.OS-lib b/nx-X11/programs/Xserver/hw/xfree86/os-support/README.OS-lib new file mode 100644 index 000000000..43312e4e8 --- /dev/null +++ b/nx-X11/programs/Xserver/hw/xfree86/os-support/README.OS-lib @@ -0,0 +1,506 @@ + + README for XFree86 OS-support Layer + ----------------------------------- + +Contents +-------- + 1) Overview + 2) Directory Layout + 3) Adding a new OS + 4) OS Support API + +1 - Overview +------------ + This directory contains the OS support layer functions for the XFree86 +servers. In addition, some miscellaneous server support functions (not +OS-dependent) are included here, to take advantage of the fact that this +library comes last in the linking order. + +Most of the functionality required to support a new OS is encapsulated in +this library. It is hoped that all OS-specific details can be encapsulated, +but that is not likely ever to be completely possible. Hence some minor +changes will wind up being made in other parts of the server. The major +design principles for this library are maintainability, readability, and +portability. Sometimes these goals conflict; some somewhat arbitrary choices +have been made in implementation. + +2 - Directory Layout +-------------------- + os-support/ Contains headers and documentation; no code + misc/ Non-OS-specific miscellaneous functions that + fit best into the link architecture this way. + shared/ Contains files with functions used by more than one + OS. These are symlinked into the OS subdirectories + at build time via Imakefile rules. This is alway + preferable to reproducing functions in more than one + OS library. + bsd/ OS support for the 386BSD/NetBSD/FreeBSD operating + systems. + bsdi/ OS support for the BSD/386 operating system. + linux/ OS support for the Linux operating system. + os2/ OS support for OS/2 2.11 and OS/2 Warp + sco/ OS support for the SCO SVR3.x operating system. + solx86/ OS support for the Solaris x86 operating system. + sysv/ OS support for all SVR4.0 and SVR4.2, and for + ISC and AT&T SVR3.2 operating systems. + +3 - Adding A New OS +------------------- + Adding a support for a new operating system entails implementing all of +the functions described in the API below. Many of these functions are no-ops +for many operating systems, and appropriate files with dummy declarations are +available in the 'shared' subdirectory. + +If your OS is sufficiently similar to an existing OS, you can make use of +the existing subdirectory. One of the reasons for implementing this OS +library was the unmaintainability of the spagetti-#ifdef code that existed +before. You should try to avoid cluttering the code with #ifdef's. If +you find that the subdirectory is getting cluttered, split off into a +seperate subdirectory (e.g. as was done for SCO, rather than cluttering +the 'sysv' subdirectory). You can split functions out of an existing +subdirectory into the 'shared' subdirectory, if that is appropriate. Just +remember to update the Imakefile for the old subdirectory. + +You will still likely have to make some small changes to other parts of +the server. You should not put OS-specific #define's or #include's anywhere +else in the server. These should all go in the "xf86_OSlib.h" header file +in this directory. + +4 - OS Support API +----------------- +void xf86OpenConsole(void) +{ + /* + * Open console device, activate VTs, etc, etc. Fill in requisite + * pieces of xf86Info. Most of this code comes from xf86Init.c + */ +} + +void xf86CloseConsole(void) +{ + /* + * Close console at server exit. + */ +} + +Bool xf86VTSwitchPending(void) +{ + /* + * Returns TRUE iff there is a VT switch operation pending for + * the server. In the USL VT model, this is indicated via a + * signal handler. Should return FALSE always for OSs without + * VTs. + */ +} + +Bool xf86VTSwitchAway(void) +{ + /* + * Handles the OS-specific action for switching away from the active + * VT. Returns FALSE if the switch away fails. Should return + * FALSE always for OSs without VTs (then again, this function + * should never be called in that case). + */ +} + +Bool xf86VTSwitchTo(void) +{ + /* + * Handles the OS-specific action for switching to the active VT. + * Returns FALSE if the switch to fails. Should return TRUE + * always for OSs without VTs (then again, this function should + * never be called in that case). + */ +} + +Bool xf86LinearVidMem(void) +{ + /* + * Returns TRUE if the OS supports mapping linear frame buffers + * (ie memory at addresses above physical memory). + */ +} + +pointer xf86MapVidMem(int ScreenNum, pointer Base, unsigned long Size) +{ + /* + * Handle mapping the video memory. Returns (pointer *)0 for + * failure; causes server exit. It is allowable to call FatalError() + * from inside this function and exit directly. + */ +} + +void xf86UnMapVidMem(int ScreenNum, pointer Base, unsigned long Size) +{ + /* + * Handle unmapping the video memory. This should undo what + * xf86MapVidMem() does. Base is a pointer obtained from + * a previous call to xf86MapVidMem(). + */ +} + +void xf86MapDisplay(int ScreenNum, int Region) +{ + /* + * For OSs that require the screen be mapped when entering a VT. + * A dummy function will be defined for OSs that don't require + * this (or don't have VTs at all). + */ +} + +void xf86UnMapDisplay(int ScreenNum, int Region) +{ + /* + * For Os that require that the screen be unmapped when leaving a + * VT. A dummy function will be defined for OSs that don't require + * this (or don't have VTs at all). + */ +} + +int xf86ReadBIOS(unsigned long Base, unsigned long Offset, + unsigned char *Buf, int Len) +{ + /* + * Read Len bytes from the BIOS at address Base, offset Offset, + * into buffer Buf. Returns -1 for failure or if the OS does + * not support reading the BIOS. This causes a driver probe + * to fail, but does not cause the server to abort. + */ +} + + +void xf86EnableIOPorts(int ScreenNum) +{ + /* + * Enables I/O permissions. The OS layer should + * enable all I/O port access. + */ +} + +void xf86DisableIOPorts(int ScreenNum) +{ + /* + * Disables I/O permissions. + */ +} + +Bool xf86DisableInterrupts(void) +{ + /* + * Disable interrupts if allowed for this OS. Returns FALSE if + * this is not allowed or if the attempt fails for some reason. + */ +} + +void xf86EnableInterrupts(void) +{ + /* + * Reenable interrupts + */ +} + +int xf86ProcessArgument(int argc, char *argv[], int i) +{ + /* + * Process OS-specific command-line arguments. See + * ddxProcessArgument() for more info. + */ +} + +void xf86UseMsg(void) +{ + /* + * Print list of OS-specific command-line arguments. See + * ddxUseMsg() for more info. + */ +} + +void xf86SoundKbdBell(int loudness, int pitch, int duration) +{ + /* + * Sound the keyboard bell. pitch is in Hz, duration in ms, + * loudness is in the range 0-100 (0 -> off). For systems + * where the loudness can't be controlled, scale the duration + * by loudness/50. + */ +} + +void xf86SetKbdLeds(int leds) +{ + /* + * Set the keyboard LEDs to the state indicated in leds + */ +} + +int xf86GetKbdLeds(void) +{ + /* + * Return the state of the keyboard LEDs. If the OS doesn't + * support this, return 0. + */ +} + +void xf86SetKbdRepeat(char rad) +{ + /* + * Set the keyboard repeat rate and delay according the + * the rad value. The lower 5 bits determine the repeat + * rate (lower value -> higher rate). The next 2 bits + * determine the delay. + * This should possibly be changed to take separate rate and + * delay parameters. + */ +} + +void xf86KbdInit(void) +{ + /* + * Save initial keyboard state. This is called at the start of + * each server generation. + */ +} + +int xf86KbdOn(void) +{ + /* + * Set the keyboard up for use with X. This is called whenever + * the server becomes active (ie at the start of each generation and + * whenever its VT becomes active). Return the file descriptor + * for keyboard input. Return -1 if there is no file descriptor + * to add as an input device. If there are errors encountered, + * call FatalError(). A return value of -1 is not considered an + * error condition. + */ +} + +int xf86KbdOff(void) +{ + /* + * Return the keyboard to the state saved by xf86KbdInit(). This is + * called at the end of a server generation, and also when the + * server's VT ceases being active. Returns the keyboard file + * descriptor. Returns -1 if there is no file descriptor to be + * removed as an input device. Errors should be handled the same + * way as in xf86KbdOn(). + */ +} + +void xf86KbdEvents(void) +{ + /* + * Read characters from the keyboard device, and post the events + * by calling xf86PostKbdEvent(). Read as much as is available + * without waiting. + */ +} + +void xf86SetMouseSpeed(int old, int new, unsigned cflag) +{ + /* + * Set the speed of the mouse port. old is the previous speed, + * new is the new speed, and cflag is the value of the termio[s] + * c_cflag field. For mice that have programmable speed operation, + * this should send the appropriate commands to the mouse. + */ +} + +void xf86MouseInit(void) +{ + /* + * This is called at the start of each server generation. In most + * cases this is a noop. If the mouse must not be opened/closed + * when VT switching, the open should be done here. + */ +} + +int xf86MousedOn(void) +{ + /* + * Set the mouse up for use with X. This is called whenever + * the server becomes active (ie at the start of each generation and + * whenever its VT becomes active). This function normally opens + * the mouse device, and may call xf86SetupMouse() to initialise + * the mouse parameters. Return the file descriptor for mouse input. + * Return -1 if there is no file descriptor to add as an input + * device. If there are errors encountered, call FatalError(). + * A return value of -1 is not considered an error condition. + */ +} + +int xf86MouseOff(Bool doclose) +{ + /* + * Release the mouse from use with X. This is called at the end + * of a server generation (with doclose==TRUE), and also when the + * server's VT ceases being active (with doclose==FALSE). If the + * mouse should not be opened/closed when VT switching, the close + * should be done here when doclose==TRUE. For other systems, the + * mouse device should be closed regardless of the doclose value. + * Returns the mouse file descriptor. Returns -1 if there is no + * file descriptor to be removed as an input device. Errors + * should be handled the same way as in xf86MouseOn(). + */ +} + +void xf86MouseEvents(void) +{ + /* + * Read characters from the mouse device, and post the events + * by calling xf86PostMseEvent(). Read as much as is available + * without waiting. If the OS doesn't handle the mouse protocol + * translation, xf86MouseProtocol() may be called to do the + * translation and event posting. If the OS does handle the protocol + * translation, MOUSE_PROTOCOL_IN_KERNEL should be #define'd in + * xf86_OSlib.h. + */ +} + +int xf86OsMouseProc(DevicePtr pPointer, int what) +{ + /* + * Implements the device-proc for the pointer device when an + * OS-based mouse driver is being used (as opposed to the + * server's internal mouse driver). Implemented as any other + * device-proc in the server. + * + * This function only needs to be implemented if USE_OSMOUSE is + * defined for the OS. + */ +} + +int xf86OsMouseEvents(void) +{ + /* + * When supporting an OS-based mouse driver (as opposed to the + * server's internal mouse driver), read some events from the device + * and post them to the DIX layer through xf86PostMseEvent(). + * + * This function only needs to be implemented if USE_OSMOUSE is + * defined for the OS. + */ +} + +void xf86OsMouseOption(int token, pointer lex_ptr) +{ + /* + * Used in parsing an OsMouse keyword from the Xconfig file. + * Passed the token type and a pointer to the token value. + * The function should do whatever is appropriate for the OS's + * mouse driver. + * + * This function only needs to be implemented if USE_OSMOUSE is + * defined for the OS. + */ +} + +/* + * The following functions are simply wrappers around the OS specific + * libc functions + */ + +void * +xf86memmove(void * dest, const void * src, INT32 n) +{ + return(memmove(dest,src,n)); +} + +void * +xf86memset(void * s, int c, INT32 n) +{ + return(memset(s,c,n)); +} + +void * +xf86memcpy(void * dest, const void * src, INT32 n) +{ + return(memcpy(dest,src,n)); +} + +int +xf86memcmp(const void * s1, const void * s2, INT32 n) +{ + return(memcmp(s1,s2,n)); +} + +char * +xf86strcat(char * dest, const char * src) +{ + return(strcat(dest,src)); +} + +char * +xf86strcpy(char * dest, const char * src) +{ + return(strcpy(dest,src)); +} + +int +xf86strcmp(const char * s1, const char * s2) +{ + return(strcmp(s1,s2)); +} + +int +xf86strncmp(const char * s1, const char * s2, INT32 n) +{ + return(strncmp(s1,s2,n)); +} + +size_t +xf86strlen(const char * s) +{ + return(strlen(s)); +} + +void +xf86getsecs(INT32 * secs, INT32 * usecs) +{ + struct timeval tv; + + gettimeofday(&tv, NULL); + *secs = tv.tv_sec; + *usecs= tv.tv_usec; + + return; +} + +double +xf86exp(double x) +{ + return(exp(x)); +} + +double +xf86log(double x) +{ + return(log(x)); +} + +double +xf86pow(double x, double y) +{ + return(pow(x,y)); +} + +double +xf86sqrt(double x) +{ + return(sqrt(x)); +} + +double +xf86cos(double x) +{ + return(cos(x)); +} + + + + +$XFree86: xc/programs/Xserver/hw/xfree86/os-support/README.OS-lib,v 3.9 2001/07/23 13:15:48 dawes Exp $ + + + + + +$XConsortium: README.OS-lib /main/5 1996/02/21 17:50:28 kaleb $ -- cgit v1.2.3